The GCode browser previously only showed files the bridge itself had
stored (its own SQLite GCodeStore, uploaded through the bridge). Files
printed directly via Anycubic Slicer Next (bypassing the bridge) land
on the printer's internal storage instead, and were only visible/
manageable from the printer's own display.
Adds a second sub-tab ("On Printer") using the same master-detail
tab pattern already used for Settings categories (showSettingsCat),
backed by the printer's file/listLocal and file/deleteBatch MQTT
actions - verified live against a real Kobra X, see memory
reference_mqtt_listlocal.md.
Key implementation detail: publish()'s own return value for these
actions is just a generic immediate ACK skeleton (code=0, empty
fields) - the real response arrives asynchronously via the file/report
callback (_on_file), same as the existing fileDetails fire-and-forget
pattern. Added _wait_for_file_action() as a small reusable bridge
between that async callback delivery and the synchronous HTTP handler,
via a per-action threading.Event registered in _on_file.
New endpoints: GET /kx/printer-files, POST /kx/printer-files/delete
(single endpoint for both single- and multi-select delete, since
deleteBatch natively accepts a filename list).
Frontend mirrors the existing store multi-select pattern (Issue #94):
select mode, select-all (scoped to what's loaded), bulk delete with
confirmation. No print/download actions in this tab for now - printing
a file already on the printer without re-uploading needs its own MQTT
schema that hasn't been verified yet.
Verified end-to-end against the real printer: listed 146 files,
deleted one, confirmed via a follow-up list that it was gone and
nothing else was affected. Also verified visually (Playwright):
tab switching, card rendering, multi-select mode, and cancel all work
as expected.
ace_direct mode (no toolhead buffer) only kept the first reported ACE
unit and silently dropped any others. Affects e.g. the Kobra S1 with two
ACE Pro units - the dashboard and OrcaSlicer sync only ever saw 4 of 8
slots. Global slot index is now box_id * 4 + local slot across all
units, matching the existing //4-%4 fallback in _global_to_box_slot.
Single-ACE (Kobra X) behavior is unchanged (unit id 0 -> same indices
as before).
feat(store): multi-select + bulk delete in the GCode browser (Issue #94)
Checkbox on every file card enters select mode; clicking anywhere on a
selected-mode card toggles it, existing per-file actions keep working via
stopPropagation. 'Select All' only affects the currently filtered/visible
files. Bulk delete is N parallel calls to the existing single-file DELETE
endpoint (no new backend route) with one confirmation dialog.
Replace the fixed dashboard layout with a fully customizable GridStack.js
grid (12-col snap grid, vendored + inlined so it also works in OrcaSlicer's
embedded webview). Cards can be dragged, resized, hidden and rearranged;
layout persists per browser. Includes two built-in presets (Standard,
Wide desktop per the original Issue #89 proposal) plus the ability to
save/apply/delete named custom presets.
fix(camera): stream freeze after ~15-30min from non-monotonic FLV
timestamps — ffmpeg's realtime pacing stalls on PTS jumps in the printer's
stream. Fixed with -use_wallclock_as_timestamps on both ffmpeg call sites
(CameraCache._input_args, _run_h264_loop). Issue #90.
test: fix tests/conftest.py referencing a stale bridge/ subfolder path and
missing args.data_dir (pre-existing breakage, unrelated to this feature);
rewrite the two test_settings.py cases that still mocked the removed
_find_env_path from the old .env-based settings storage.
Previous commit hard-disabled aiohttp's per-request access log via
setLevel(WARNING), with no way to turn it back on. Added a
'verbose_http_log' setting (default off) — toggle in Settings, persisted
to config.ini, applied on bridge start via _set_verbose_http_log().
- Dashboard reprint now delegates to _start_print with gcode_filaments from DB
so the used_paint_indices filter applies correctly (Issue #84)
- Startup log no longer shows 0.0.0.0 — actual LAN IP is displayed (Issue #86)
- New vibration_compensation setting: toggle in Settings UI activates resonance
compensation before each print, follows exact auto_leveling pattern (Issue #85)
- Slot color editor: Pickr HSV color picker (offline, served from lib/),
recent swatches (up to 16, localStorage), copy color from other slot
- Unified axes control panel: XY+Z merged, shared step size + custom mm input
- Language selector moved from header to Settings → Appearance
- Filament mismatch detection blocks Upload-and-Print on material mismatch,
slot mapper opens automatically
- Spoolman spool-per-slot assignment in AMS status tab and Filaments settings
- Fix: Spoolman sync rate label — 0=end of print, not disabled (Issue #76)
- Fix: lib/ assets served by bridge static handler for offline use
- UI: global unified select + input styling, set-row labels match modal-field
- Merged XY + Z axis cards into single Axes Control panel with shared step
size row and free-text mm input; Home XY/Z placed below respective pads;
Home All + Motors Off centred at bottom
- Language selector removed from header bar, now only in Settings → Appearance
- Upload-and-Print blocked on GCode/AMS material mismatch; slot mapper dialog
opens automatically with mismatch warning highlighting affected slots
- Spoolman spool-per-slot assignment: dropdown in AMS status tab per kachel,
dedicated card in Filaments settings tab with save button
- nightly.yml: NIGHTLY_CHANGELOG.md takes precedence over auto-generated
commit log when present; CI uses it as release body verbatim
Nach Squash-Merge von #32 die Reviews-Anpassungen nachgereicht, die im
Dev-Repo (viewit/KX-Bridge@7c834bc) bereits enthalten waren:
- Content-Disposition mit RFC5987 filename*=UTF-8 + ASCII-Fallback
- DE-Strings im Verify-Dialog übersetzt (msg/confirm/abort)
