release: v0.9.7

Reviewed-on: viewit/KX-Bridge-Release#19

.env.example

@@ -21,3 +21,4 @@ DEVICE_ID=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
 
 # Modell-ID (Kobra X Standard: 20030)
 MODE_ID=20030
+

CHANGELOG.de.md

@@ -1,5 +1,65 @@
 # Changelog
 
+## [0.9.7] – 2026-05-08
+
+### Neu
+- **fetch_credentials-Tool:** Ruft MQTT-Credentials direkt vom Drucker per HTTP ab — kein laufender Anycubic Slicer nötig, nur die Drucker-IP. Linux-Binary und Windows-EXE im Release enthalten. (Beitrag von bebu, PR #19)
+
+### Fixes
+- **Upload großer GCode-Dateien:** Dateien >1 MB wurden mit HTTP 413 abgelehnt — aiohttp `client_max_size` auf 256 MB erhöht
+- **Upload-Timeout:** Socket-Timeout nach GCode-Upload von 10s auf 120s erhöht — große Dateien führten zu einem Absturz der Bridge mit leerer Antwort während der Drucker noch verarbeitete
+
+---
+
+## [0.9.6] – 2026-05-02
+
+### Neu
+- **Licht-Status-Synchronisierung:** Ein/Aus-Zustand und Helligkeit des Druckerlichts werden jetzt live über `light/report` MQTT gelesen — der Licht-Toggle in der UI spiegelt den echten Druckerstatus wider
+- **Zeit-Minicards:** Fortschritts-Panel zeigt jetzt drei Karten — Verstrichen, Restzeit und Slicer-Schätzung — sowie einen Layer-Badge neben dem Fortschrittsbalken
+- **Slicer-Schätzzeit aus GCode:** Geschätzte Druckzeit wird direkt aus der hochgeladenen GCode-Datei gelesen (OrcaSlicer: `; total estimated time:` am Dateiende, PrusaSlicer: `; estimated printing time` im Header)
+- **Erweiterte Druckerstatus-Strings:** `pausing`, `paused`, `resuming`, `resumed`, `stopping`, `stopped` hinzugefügt — fehlten bisher und ließen die UI rohe Status-Codes bei Pause/Fortsetzen/Stopp anzeigen
+
+### Fixes
+- **file_ready-Banner:** Upload-Banner wird nach Stopp oder Abbruch eines Drucks nicht mehr angezeigt
+- **Zeitanzeige bei Stopp/Abbruch:** Verstrichen-, Restzeit- und Slicer-Schätzung werden auf null zurückgesetzt wenn ein Druck gestoppt oder abgebrochen wird
+- **start.sh:** `config/`-Verzeichnis und `config.ini.example` werden beim ersten Start automatisch angelegt wenn sie fehlen (Issue #15)
+
+---
+
+## [0.9.5] – 2026-05-01
+
+### Neu
+- **Upload-Banner:** Nach „Nur hochladen" erscheint ein grüner Banner mit Dateiname — „▶ Druck starten" startet den Druck direkt, „✕ Abbrechen" schließt den Banner
+
+### Fixes
+- **Auto-Print:** `auto_print` wurde nach dem Multipart-Loop immer auf `False` zurückgesetzt — OrcaSlicer „Hochladen und drucken" startete den Druck nie automatisch
+- **Thumbnail:** Vorschaubild wird jetzt auch bei „Nur hochladen" angezeigt — Bridge fragt `fileDetails` direkt nach dem Upload an
+- **Log Auto-Scroll:** Scroll-Position bleibt erhalten wenn Auto-Scroll deaktiviert ist — kein ungewollter Sprung nach oben mehr
+
+---
+
+## [0.9.4] – 2026-05-01
+
+### Neu
+- **AMS-Slot-Editor:** Slot im AMS-Panel anklicken → Dialog mit Farbpicker und Material-Auswahl (Schnellbuttons: PLA/PETG/ABS/ASA/TPU/PA/PC/HIPS oder Freitext) direkt im Browser
+- **Verbessertes Log-Panel:** Vollständige MQTT-Payloads (keine Kürzung mehr), Richtungsfilter (Alle/RX/TX) und Topic-Schnellfilter (AMS / print / info / status)
+
+### Fixes
+- **i18n:** Kamera-Placeholder-Text und Log-Richtungs-Button „Alle" werden jetzt korrekt beim Sprachwechsel übersetzt
+
+---
+
+## [0.9.3] – 2026-05-01
+
+### Fixes
+- **Update-Check:** Stable-User erhalten keine Dev-Pre-Releases mehr — `STABLE_RELEASE_API` hatte `pre-release=true`, wodurch stabile Installationen Dev-Builds statt stabiler Releases fanden (Issue #14)
+- **Version nach Update:** `VERSION`-Datei wird jetzt im Docker-Image mitgeliefert (`COPY VERSION .`) — `_write_version()` benötigt eine vorhandene Datei, ohne die wurde die Version nach dem Self-Update nie aktualisiert (Issue #14)
+
+### Neu
+- **Version im Header:** Laufende Version wird im Web-UI-Header neben dem Druckernamen angezeigt — kein Öffnen der Einstellungen nötig (Issue #14)
+
+---
+
 ## [0.9.2] – 2026-04-29
 
 ### ⚠️ Breaking Change: Konfiguration wechselt von `.env` zu `config/config.ini`

CHANGELOG.md

@@ -1,5 +1,65 @@
 # Changelog
 
+## [0.9.7] – 2026-05-08
+
+### New
+- **fetch_credentials tool:** Fetches and decrypts MQTT credentials directly from the printer via HTTP — no running Anycubic Slicer required, only the printer IP needed. Linux binary and Windows EXE included in release. (Contributed by bebu, PR #19)
+
+### Fixes
+- **Large GCode upload:** Files >1 MB were rejected with HTTP 413 — aiohttp `client_max_size` raised to 256 MB
+- **Upload timeout:** Socket timeout after GCode upload raised from 10s to 120s — large files caused the bridge to crash with an empty response while the printer was still processing
+
+---
+
+## [0.9.6] – 2026-05-02
+
+### New
+- **Light status sync:** Light on/off state and brightness are now read live from the printer via `light/report` MQTT message — the light toggle in the UI reflects the actual printer state
+- **Time mini-cards:** Progress panel now shows three cards — Elapsed, Remaining and Slicer estimate — with a layer counter badge next to the progress bar
+- **Slicer estimate from GCode:** Estimated print time is parsed directly from the uploaded GCode file (OrcaSlicer: `; total estimated time:` at end of file, PrusaSlicer: `; estimated printing time` in header)
+- **Extended printer status strings:** Added `pausing`, `paused`, `resuming`, `resumed`, `stopping`, `stopped` states — previously missing, causing the UI to show raw status codes during pause/resume/stop transitions
+
+### Fixes
+- **file_ready banner:** Upload banner is no longer shown after print stop or cancel
+- **Timers on stop/cancel:** Elapsed, remaining and slicer estimate times are reset to zero when a print is stopped or cancelled
+- **start.sh:** `config/` directory and `config.ini.example` are now created automatically on first run if missing (Issue #15)
+
+---
+
+## [0.9.5] – 2026-05-01
+
+### New
+- **Upload banner:** After "Upload only", a green banner appears with the filename — "▶ Start Print" starts the print directly, "✕ Cancel" dismisses the banner
+
+### Fixes
+- **Auto-print:** `auto_print` was always reset to `False` after the multipart loop — OrcaSlicer "Upload and print" never started the print automatically
+- **Thumbnail:** Preview image is now shown after "Upload only" — bridge requests `fileDetails` immediately after upload
+- **Log auto-scroll:** Scroll position is preserved when auto-scroll is disabled — no more unwanted jump to top
+
+---
+
+## [0.9.4] – 2026-05-01
+
+### New
+- **AMS slot editor:** Click any slot in the AMS panel to open an edit dialog — set color (color picker) and material (preset buttons: PLA/PETG/ABS/ASA/TPU/PA/PC/HIPS or free text) directly from the browser
+- **Improved log panel:** Full MQTT payloads (no truncation), direction filter (All/RX/TX) and topic quick-filter buttons (AMS / print / info / status)
+
+### Fixes
+- **i18n:** Camera placeholder text and log direction "All" button now correctly translated on language switch
+
+---
+
+## [0.9.3] – 2026-05-01
+
+### Fixes
+- **Update check:** Stable users no longer receive dev pre-releases — `STABLE_RELEASE_API` had `pre-release=true` which caused stable installs to find dev builds instead of stable releases (Issue #14)
+- **Version after update:** `VERSION` file is now included in the Docker image (`COPY VERSION .`) — `_write_version()` requires the file to exist, without it the version was never updated after self-update (Issue #14)
+
+### New
+- **Version in header:** Running version shown in the Web-UI header next to the printer name — no need to open Settings to check (Issue #14)
+
+---
+
 ## [0.9.2] – 2026-04-29
 
 ### ⚠️ Breaking Change: Configuration moves from `.env` to `config/config.ini`

Dockerfile

@@ -2,17 +2,17 @@ FROM python:3.11-slim
 
 WORKDIR /app
 
-COPY bridge/requirements.txt .
+COPY requirements.txt .
 RUN pip install --no-cache-dir -r requirements.txt
 
-COPY bridge/kobrax_moonraker_bridge.py .
-COPY bridge/config_loader.py .
-COPY bridge/env_loader.py .
-COPY bridge/kobrax_client.py .
+COPY kobrax_moonraker_bridge.py .
+COPY config_loader.py .
+COPY env_loader.py .
+COPY kobrax_client.py .
 COPY VERSION .
-COPY bridge/anycubic_slicer.crt .
-COPY bridge/anycubic_slicer.key .
-COPY bridge/config/config.ini.example /app/config/config.ini.example
+COPY anycubic_slicer.crt .
+COPY anycubic_slicer.key .
+COPY config/config.ini.example /app/config/config.ini.example
 
 # config/ ist ein Volume-Mountpoint – beim Start wird config.ini aus .env migriert
 # falls noch keine config.ini vorhanden ist.

README.de.md

@@ -2,7 +2,7 @@
 
 # KX-Bridge – Anycubic Kobra X
 
-**Version:** 0.9.2
+**Version:** 0.9.7
 
 Steuere deinen **Anycubic Kobra X** mit OrcaSlicer — ohne Klipper, ohne Raspberry Pi.  
 KX-Bridge ist eine Moonraker-kompatible Bridge die direkt mit dem Drucker kommuniziert.
@@ -18,13 +18,23 @@ Den Kobra X in den LAN-Modus versetzen:
 
 ### Schritt 2 – Credentials holen
 
-Die MQTT-Zugangsdaten sind druckerspezifisch. So holst du sie:
+Die MQTT-Zugangsdaten sind druckerspezifisch und an die Hardware gebunden.
+
+**Option A – fetch_credentials (empfohlen):**
+
+```bash
+fetch_credentials --ip 192.168.x.x --write-config
+```
+
+Holt die Credentials direkt per HTTP vom Drucker und schreibt sie automatisch in `config/config.ini`. Benötigt nur die Drucker-IP — kein Slicer nötig.
+
+**Option B – extract_credentials (wenn Drucker-IP unbekannt):**
 
 1. **AnycubicSlicerNext** öffnen und Drucker verbinden (bis Status angezeigt wird)
-2. **`extract_credentials.exe`** (Windows) oder **`extract_credentials`** (Linux) ausführen — gibt Username, Password, Device-ID und Drucker-IP aus
-3. Werte merken / kopieren
+2. **`extract_credentials`** ausführen — gibt Username, Password, Device-ID und Drucker-IP aus
+3. Werte im Web-UI eintragen (⚙-Menü)
 
-> **Download:** [gitea.it-drui.de/viewit/KX-Bridge-Release/releases](https://gitea.it-drui.de/viewit/KX-Bridge-Release/releases) → `extract_credentials.exe` (Windows) / `extract_credentials` (Linux) im jeweiligen Release-Asset
+> **Download:** [gitea.it-drui.de/viewit/KX-Bridge-Release/releases](https://gitea.it-drui.de/viewit/KX-Bridge-Release/releases) → `fetch_credentials` / `extract_credentials` (Linux & Windows) im jeweiligen Release-Asset
 
 ### Schritt 3 – Bridge starten
 
@@ -36,7 +46,7 @@ Das Skript baut das Docker-Image automatisch beim ersten Aufruf.
 
 **Web-UI öffnen:** `http://BRIDGE-IP:7125`  
 → Das ⚙-Menü öffnet sich beim ersten Start automatisch  
-→ Credentials aus Schritt 2 eintragen → **Speichern & Neustart**
+→ Bei Option B: Credentials aus Schritt 2 eintragen → **Speichern & Neustart**
 
 **OrcaSlicer verbinden:**  
 Drucker → Verbindungstyp **Moonraker** → Host: `http://BRIDGE-IP:7125`
@@ -46,6 +56,12 @@ Drucker → Verbindungstyp **Moonraker** → Host: `http://BRIDGE-IP:7125`
 
 ---
 
+## 📺 Video Tutorial
+
+[![KX-Bridge Setup & Bedienung](https://img.youtube.com/vi/1Ql4wfH27fM/hqdefault.jpg)](https://www.youtube.com/watch?v=1Ql4wfH27fM)
+
+---
+
 ## ⚠️ Update von 0.9.1 oder älter
 
 Ab **0.9.2** speichert KX-Bridge Einstellungen in `config/config.ini` statt in `.env`.
@@ -110,7 +126,8 @@ docker-compose down
 ## Fehlerbehebung
 
 **„Falsche MQTT-Zugangsdaten"** beim Start:
-- AnycubicSlicerNext neu starten, Drucker verbinden, `extract_credentials` erneut ausführen
+- `fetch_credentials --ip <Drucker-IP> --write-config` erneut ausführen und Bridge neu starten
+- Wenn IP unbekannt: AnycubicSlicerNext neu starten, Drucker verbinden, `extract_credentials` erneut ausführen
 - Nur die IP-Adresse ins Feld eintragen, keinen Port (✗ `192.168.1.102:9883` → ✓ `192.168.1.102`)
 
 **Drucker nicht gefunden / kein LAN-Modus:**
@@ -135,3 +152,9 @@ sudo usermod -aG docker $USER  # dann neu einloggen
 ## Lizenz & Rechtliches
 
 Interoperabilitätsforschung gem. §69e UrhG — ausschließlich private, nicht-kommerzielle Nutzung.
+
+<p align="center">
+  <a href="https://ko-fi.com/viewitde">
+    <img src="https://ko-fi.com/img/githubbutton_sm.svg" alt="Ko-fi Support"/>
+  </a>
+</p>

README.md

@@ -2,7 +2,7 @@
 
 # KX-Bridge – Anycubic Kobra X
 
-**Version:** 0.9.2
+**Version:** 0.9.7
 
 Control your **Anycubic Kobra X** with OrcaSlicer — no Klipper, no Raspberry Pi.  
 KX-Bridge is a Moonraker-compatible bridge that communicates directly with the printer.
@@ -46,6 +46,12 @@ Printer → Connection type **Moonraker** → Host: `http://BRIDGE-IP:7125`
 
 ---
 
+## 📺 Video Tutorial
+
+[![KX-Bridge Setup & Usage](https://img.youtube.com/vi/1Ql4wfH27fM/hqdefault.jpg)](https://www.youtube.com/watch?v=1Ql4wfH27fM)
+
+---
+
 ## ⚠️ Upgrading from 0.9.1 or earlier
 
 Starting with **0.9.2**, KX-Bridge stores settings in `config/config.ini` instead of `.env`.
@@ -135,3 +141,9 @@ sudo usermod -aG docker $USER  # then log out and back in
 ## License
 
 Interoperability research under §69e UrhG — private, non-commercial use only.
+
+<p align="center">
+  <a href="https://ko-fi.com/viewitde">
+    <img src="https://ko-fi.com/img/githubbutton_sm.svg" alt="Ko-fi Support"/>
+  </a>
+</p>

VERSION

@@ -1 +1 @@
-0.9.2
+0.9.7

fetch_credentials.py

@@ -0,0 +1,397 @@
+#!/usr/bin/env python3
+"""
+fetch_credentials.py – Fetches and decrypts Anycubic Kobra X credentials via HTTP API.
+
+Original approach by bebu (PR #19, KX-Bridge-Release).
+Reverse engineered from the Vue project embedded in libWorkbench.so (Anycubic Slicer Next).
+No running slicer required — only the printer IP in LAN.
+
+Algorithm: AES-256-CBC
+  Key: token[16:32] from /info response
+  IV:  response token from /ctrl response
+
+Usage:
+    python3 fetch_credentials.py --ip 192.168.x.x
+    python3 fetch_credentials.py --ip 192.168.x.x --write-config
+    python3 fetch_credentials.py --ip 192.168.x.x --write-config --config-file ../config/config.ini
+    python3 fetch_credentials.py --ctrl ctrl.json --info info.json
+"""
+
+import json
+import sys
+import base64
+import hashlib
+import argparse
+import os
+import time
+import random
+import string
+import requests
+from pathlib import Path
+from Crypto.Cipher import AES
+from Crypto.Util.Padding import unpad
+
+
+def evp_bytes_to_key(password, salt, key_len, iv_len):
+    """
+    Derive key and IV from password and salt using OpenSSL EVP_BytesToKey
+    This mimics the CryptoJS default key derivation
+    """
+    m = []
+    i = 0
+    while len(b''.join(m)) < (key_len + iv_len):
+        md5 = hashlib.md5()
+        data = password + salt
+        if i > 0:
+            data = m[i - 1] + password + salt
+        md5.update(data)
+        m.append(md5.digest())
+        i += 1
+    ms = b''.join(m)
+    return ms[:key_len], ms[key_len:key_len + iv_len]
+
+
+def generate_signature(token, ts, nonce):
+    """
+    Generate MD5 signature for /ctrl endpoint
+    Signature = md5(md5(token[0:16]) + ts + nonce)
+    """
+    # First MD5: token.slice(0, 16)
+    first_md5 = hashlib.md5(token[:16].encode('utf-8')).hexdigest()
+    # Second MD5: first_md5 + ts + nonce
+    signature_data = first_md5 + str(ts) + nonce
+    signature = hashlib.md5(signature_data.encode('utf-8')).hexdigest()
+    return signature
+
+
+def generate_nonce(length=6):
+    """Generate a random alphanumeric nonce"""
+    chars = string.ascii_letters + string.digits
+    return ''.join(random.choice(chars) for _ in range(length))
+
+
+def fetch_from_http(ip, port, endpoint, token=None, did="random", verbose=False):
+    """
+    Fetch data from HTTP endpoint on the printer
+    
+    Args:
+        ip (str): IP address of the printer
+        port (int): Port number (default 18910)
+        endpoint (str): Either 'info' or 'ctrl'
+        token (str): Device token (required for /ctrl endpoint)
+        did (str): Device ID (required for /ctrl endpoint)
+        verbose (bool): Print debug information
+    
+    Returns:
+        dict: JSON response data
+    """
+    try:
+        if endpoint == 'info':
+            url = f"http://{ip}:{port}/info"
+            if verbose:
+                print(f"Fetching: {url}")
+            response = requests.get(url, timeout=10)
+            response.raise_for_status()
+            return response.json()
+        
+        elif endpoint == 'ctrl':
+            if not token:
+                raise ValueError("Token is required for /ctrl endpoint")
+            
+            # Generate signature parameters
+            ts = int(time.time() * 1000)  # Current timestamp in ms
+            nonce = generate_nonce(6)
+            signature = generate_signature(token, ts, nonce)
+            
+            url = f"http://{ip}:{port}/ctrl"
+            params = {
+                'ts': ts,
+                'nonce': nonce,
+                'sign': signature,
+                'did': did
+            }
+            
+            if verbose:
+                print(f"Fetching: {url}")
+                print(f"  Parameters:")
+                print(f"    ts: {ts}")
+                print(f"    nonce: {nonce}")
+                print(f"    sign: {signature}")
+                print(f"    did: {did}")
+            
+            response = requests.post(url, params=params, timeout=10)
+            response.raise_for_status()
+            return response.json()
+        
+        else:
+            raise ValueError(f"Unknown endpoint: {endpoint}")
+    
+    except requests.exceptions.RequestException as e:
+        raise Exception(f"HTTP request failed for {endpoint}: {e}")
+    except json.JSONDecodeError as e:
+        raise Exception(f"Invalid JSON response from {endpoint}: {e}")
+
+
+def decrypt_text(encrypted_data, key, iv):
+    """
+    Decrypt data using AES-256-CBC
+    Handles CryptoJS-style encrypted data (OpenSSL format with salt)
+    
+    Args:
+        encrypted_data (str): Encrypted data string (CryptoJS format)
+        key (str): Decryption key string
+        iv (str): Initialization vector string
+    
+    Returns:
+        dict: Decrypted JSON data
+    """
+    try:
+        # Convert key and IV to bytes
+        key_bytes = key.encode('utf-8')
+        iv_bytes = iv.encode('utf-8')
+        
+        # Decrypt using direct key and IV (as per the original code)
+        cipher = AES.new(key_bytes, AES.MODE_CBC, iv_bytes)
+        
+        # The encrypted_data might be base64 or hex encoded
+        # Try base64 first
+        try:
+            encrypted_bytes = base64.b64decode(encrypted_data)
+        except:
+            try:
+                # Try as hex
+                encrypted_bytes = bytes.fromhex(encrypted_data)
+            except:
+                # If all else fails, encode as UTF-8
+                encrypted_bytes = encrypted_data.encode('utf-8')
+        
+        # Decrypt
+        decrypted = cipher.decrypt(encrypted_bytes)
+        
+        # Try to unpad
+        try:
+            unpadded = unpad(decrypted, AES.block_size)
+        except ValueError:
+            # If unpadding fails, use as-is
+            unpadded = decrypted
+        
+        plaintext = unpadded.decode('utf-8')
+        
+        # Parse JSON
+        return json.loads(plaintext)
+    
+    except Exception as e:
+        return {"error": str(e), "error_type": type(e).__name__}
+
+
+def main():
+    """Main function to decrypt printer data"""
+    
+    # Parse command-line arguments
+    parser = argparse.ArgumentParser(
+        description='Fetch and decrypt Anycubic Kobra X credentials via HTTP API',
+    )
+    # HTTP mode
+    parser.add_argument('--ip', help='IP address of the printer')
+    parser.add_argument('--port', type=int, default=18910, help='Printer HTTP port (default: 18910)')
+
+    # File mode
+    parser.add_argument('--ctrl', default='ctrl.json', help='Path to ctrl.json (default: ctrl.json)')
+    parser.add_argument('--info', default='info.json', help='Path to info.json (default: info.json)')
+
+    # Output
+    parser.add_argument('--output', default=None, help='Save raw decrypted JSON to file (optional)')
+    parser.add_argument('--write-config', action='store_true',
+                        help='Write credentials to config.ini')
+    parser.add_argument('--config-file', default=None,
+                        help='Path to config.ini (default: ../config/config.ini relative to this script)')
+    parser.add_argument('--verbose', '-v', action='store_true', help='Verbose output')
+
+    args = parser.parse_args()
+    
+    # Determine mode: HTTP or file
+    if args.ip:
+        # HTTP mode: fetch from printer
+        if args.verbose:
+            print("=" * 70)
+            print("Fetching configuration from printer via HTTP")
+            print("=" * 70)
+            print(f"Printer IP: {args.ip}:{args.port}")
+            print()
+        
+        try:
+            # Fetch info.json
+            if args.verbose:
+                print("Step 1: Fetching device info...")
+            info = fetch_from_http(args.ip, args.port, 'info', verbose=args.verbose)
+            
+            # Get token from info
+            token = info.get('token')
+            if not token:
+                print("Error: No token found in /info response", file=sys.stderr)
+                return 1
+            
+            # Fetch data.json (encrypted config) from /ctrl endpoint
+            if args.verbose:
+                print("\nStep 2: Fetching encrypted configuration from /ctrl...")
+            data = fetch_from_http(args.ip, args.port, 'ctrl', token=token, verbose=args.verbose)
+            
+            if args.verbose:
+                print("\nData fetched successfully!")
+            
+        except Exception as e:
+            print(f"Error: {e}", file=sys.stderr)
+            return 1
+    
+    else:
+        # File mode: load from disk
+        if args.verbose:
+            print("=" * 70)
+            print("Loading configuration from files")
+            print("=" * 70)
+        
+        # Check if input files exist
+        if not Path(args.ctrl).exists():
+            print(f"Error: {args.ctrl} not found", file=sys.stderr)
+            return 1
+        if not Path(args.info).exists():
+            print(f"Error: {args.info} not found", file=sys.stderr)
+            return 1
+        
+        # Read ctrl.json
+        try:
+            with open(args.ctrl, 'r') as f:
+                data = json.load(f)
+        except json.JSONDecodeError as e:
+            print(f"Error reading {args.ctrl}: {e}", file=sys.stderr)
+            return 1
+        except Exception as e:
+            print(f"Error reading {args.ctrl}: {e}", file=sys.stderr)
+            return 1
+        
+        # Read info.json
+        try:
+            with open(args.info, 'r') as f:
+                info = json.load(f)
+        except json.JSONDecodeError as e:
+            print(f"Error reading {args.info}: {e}", file=sys.stderr)
+            return 1
+        except Exception as e:
+            print(f"Error reading {args.info}: {e}", file=sys.stderr)
+            return 1
+    
+    # Extract values
+    try:
+        encrypted_info = data['data']['info']
+        response_token = data['data']['token']
+        full_token = info['token']
+    except KeyError as e:
+        print(f"Error: Missing required key {e}", file=sys.stderr)
+        return 1
+    
+    # Generate decryption key and IV
+    key_part = full_token[16:32]
+    
+    if args.verbose:
+        print("=" * 70)
+        print("Printer Configuration Decryption")
+        print("=" * 70)
+        print(f"Input data file: {args.ctrl}")
+        print(f"Input info file: {args.info}")
+        print(f"Output file: {args.output}")
+        print()
+        print("Decryption Parameters:")
+        print(f"  Encrypted data length: {len(encrypted_info)} bytes")
+        print(f"  Full token: {full_token}")
+        print(f"  Full token length: {len(full_token)} characters")
+        print(f"  Response token (IV): {response_token}")
+        print(f"  Decryption key: {key_part}")
+        print(f"  Key length: {len(key_part)} characters")
+        print(f"  IV length: {len(response_token)} characters")
+        print()
+    
+    # Decrypt
+    if args.verbose:
+        print("Decrypting...")
+    
+    result = decrypt_text(encrypted_info, key_part, response_token)
+    
+    if 'error' in result:
+        print(f"Error during decryption: {result.get('error')}", file=sys.stderr)
+        return 1
+    
+    # Show result
+    print()
+    print("=" * 55)
+    print("  CREDENTIALS")
+    print("=" * 55)
+    print(f"  {'Printer IP':12s}  {result.get('ip', 'n/a')}")
+    print(f"  {'Username':12s}  {result.get('username', 'n/a')}")
+    print(f"  {'Password':12s}  {result.get('password', 'n/a')}")
+    print(f"  {'Device-ID':12s}  {result.get('deviceId', 'n/a')}")
+    print(f"  {'Mode-ID':12s}  {result.get('modeId', 'n/a')}")
+    print(f"  {'Model':12s}  {result.get('modelName', 'n/a')}")
+    print(f"  {'Broker':12s}  {result.get('broker', 'n/a')}")
+    print("=" * 55)
+
+    if args.verbose:
+        print()
+        print("Full decrypted config:")
+        # Strip certs/keys from verbose output to avoid cluttering terminal
+        display = {k: v for k, v in result.items() if k not in ('devicecrt', 'devicepk')}
+        print(json.dumps(display, indent=2))
+
+    # Optionally save raw JSON
+    if args.output:
+        try:
+            with open(args.output, 'w') as f:
+                json.dump(result, f, indent=2)
+            print(f"\nRaw config saved to: {args.output}")
+        except Exception as e:
+            print(f"Error writing to {args.output}: {e}", file=sys.stderr)
+            return 1
+
+    # Write config.ini
+    if args.write_config:
+        if args.config_file:
+            config_path = args.config_file
+        else:
+            config_path = os.path.join(os.path.dirname(os.path.abspath(__file__)),
+                                       '..', 'config', 'config.ini')
+            config_path = os.path.normpath(config_path)
+
+        _write_config_ini(result, config_path)
+    else:
+        print(f"\nTip: pass --write-config to write credentials directly to config.ini")
+
+    return 0
+
+
+def _write_config_ini(result: dict, config_path: str):
+    """Write fetched credentials into config.ini, preserving existing non-credential keys."""
+    import configparser
+
+    cfg = configparser.ConfigParser()
+
+    if os.path.isfile(config_path):
+        cfg.read(config_path)
+
+    if not cfg.has_section('connection'):
+        cfg.add_section('connection')
+
+    cfg.set('connection', 'printer_ip', result.get('ip', ''))
+    cfg.set('connection', 'mqtt_port',  '9883')
+    cfg.set('connection', 'username',   result.get('username', ''))
+    cfg.set('connection', 'password',   result.get('password', ''))
+    cfg.set('connection', 'device_id',  result.get('deviceId', ''))
+    cfg.set('connection', 'mode_id',    result.get('modeId', '20030'))
+
+    os.makedirs(os.path.dirname(config_path), exist_ok=True)
+    with open(config_path, 'w') as f:
+        cfg.write(f)
+
+    print(f"\n✓ Credentials written to '{config_path}'.")
+
+
+if __name__ == '__main__':
+    sys.exit(main())

kobrax_client.py

@@ -309,7 +309,7 @@ class KobraXClient:
                          data.get("curr_hotbed_temp", "?"), data.get("target_hotbed_temp", 0))
             else:
                 log.info("RX %-25s  state=%-12s  data=%s",
-                         suffix, state, json.dumps(payload.get("data"), ensure_ascii=False)[:120])
+                         suffix, state, json.dumps(payload.get("data"), ensure_ascii=False))
 
         # Resolve by report topic suffix (e.g. "info/report")
         if suffix in self._pending_report:
@@ -366,7 +366,7 @@ class KobraXClient:
         topic = self._pub_topic(msg_type)
         log.info("TX %-25s  action=%-12s  data=%s",
                  f"{msg_type}/request", action,
-                 json.dumps(data, ensure_ascii=False)[:120] if data else "null")
+                 json.dumps(data, ensure_ascii=False) if data else "null")
         try:
             with self._lock:
                 self._sock.sendall(_build_publish(topic, payload))
@@ -414,7 +414,7 @@ class KobraXClient:
         topic = self._web_topic(msg_type)
         log.info("TX(web) %-23s  action=%-12s  data=%s",
                  f"{msg_type}/request", action,
-                 json.dumps(data, ensure_ascii=False)[:120] if data else "null")
+                 json.dumps(data, ensure_ascii=False) if data else "null")
         try:
             with self._lock:
                 self._sock.sendall(_build_publish(topic, payload))
@@ -523,7 +523,7 @@ class KobraXClient:
 
         sock = socket.create_connection((self.host, 18910), timeout=30)
         sock.sendall(headers + body)
-        sock.settimeout(10)
+        sock.settimeout(120)  # große GCode-Dateien brauchen Zeit bis der Drucker antwortet
         response = b""
         try:
             while True:

kobrax_moonraker_bridge.py

@@ -108,11 +108,17 @@ KLIPPER_VERSION   = "v0.12.0-1"
 
 
 def _parse_gcode_estimated_time(data: bytes) -> int:
-    """Liest '; estimated printing time (normal mode) = Xh Ym Zs' aus GCode-Header.
-    Gibt Sekunden zurück, 0 wenn nicht gefunden. Sucht nur in den ersten 8KB."""
+    """Liest geschätzte Druckzeit aus GCode (OrcaSlicer + PrusaSlicer).
+    Gibt Sekunden zurück, 0 wenn nicht gefunden.
+    PrusaSlicer schreibt die Zeit ins Header (erste 16KB),
+    OrcaSlicer schreibt sie ans Ende der Datei (letzte 16KB)."""
     import re
-    header = data[:8192].decode("utf-8", errors="ignore")
-    m = re.search(r";\s*estimated printing time \(normal mode\)\s*=\s*(.*)", header)
+    # Anfang + Ende der Datei durchsuchen (OrcaSlicer schreibt Zeit am Ende)
+    search_text = (data[:16384] + data[-65536:]).decode("utf-8", errors="ignore")
+    # OrcaSlicer:  ; total estimated time: 9m 20s
+    # PrusaSlicer: ; estimated printing time (normal mode) = 1h 9m 20s
+    m = (re.search(r";\s*total estimated time:\s*(.*)", search_text) or
+         re.search(r";\s*estimated printing time \(normal mode\)\s*=\s*(.*)", search_text))
     if not m:
         return 0
     parts = re.findall(r"(\d+)\s*([hms])", m.group(1))
@@ -121,6 +127,8 @@ def _parse_gcode_estimated_time(data: bytes) -> int:
         if unit == "h":   secs += int(val) * 3600
         elif unit == "m": secs += int(val) * 60
         elif unit == "s": secs += int(val)
+    if secs:
+        log.info(f"Slicer-Schätzzeit: {secs}s ({m.group(1).strip()})")
     return secs
 
 
@@ -154,6 +162,7 @@ class KobraXBridge:
             "taskid":             "-1",
             "print_speed_mode":   2,
             "connection_error":   "",
+            "file_ready":         "",
         }
         self._ams_slots: list[dict] = []
         self._ams_loaded_slot: int = -1
@@ -169,6 +178,7 @@ class KobraXBridge:
         client.callbacks["info/report"]           = self._on_info
         client.callbacks["file/report"]           = self._on_file
         client.callbacks["multiColorBox/report"]  = self._on_multicolor_box
+        client.callbacks["light/report"]          = self._on_light
 
     # -------------------------------------------------------------------------
     # MQTT callbacks (called from reader thread)
@@ -191,6 +201,11 @@ class KobraXBridge:
         if kobra_state in ("stoped", "canceled"):
             self._state["progress"] = 0.0
             self._state["filename"] = ""
+            self._state["file_ready"] = ""
+            self._state["print_duration"] = 0
+            self._state["remain_time"] = 0
+            self._state["slicer_time"] = 0
+            self._thumbnail_b64 = ""
         self._state["filename"]       = d.get("filename", self._state["filename"])
         if "progress" in d:
             self._state["progress"]   = float(d["progress"]) / 100.0
@@ -275,6 +290,12 @@ class KobraXBridge:
             log.info(f"AMS-Slots empfangen: {len(slots)}, loaded_slot={self._ams_loaded_slot}")
             self._push_status_update()
 
+    def _on_light(self, payload: dict):
+        d = payload.get("data") or {}
+        self._state["light_on"]         = bool(d.get("status", 0))
+        self._state["light_brightness"] = int(d.get("brightness", 80))
+        self._push_status_update()
+
     # OrcaSlicer filament preset IDs (MoonrakerPrinterAgent.cpp mapping)
     _TRAY_INFO_IDX = {
         "PLA":      "OGFL99", "PLA-CF":   "OGFL98", "PLA SILK": "OGFL96",
@@ -503,6 +524,7 @@ class KobraXBridge:
         ct = request.headers.get("Content-Type", "")
         if "multipart" not in ct:
             return web.json_response({"error": "expected multipart"}, status=400)
+        auto_print = False
         reader = await request.multipart()
         file_data = None
         remote_filename = self._last_uploaded_file or "upload.gcode"
@@ -516,14 +538,17 @@ class KobraXBridge:
                 val = (await part.read()).decode("utf-8", errors="replace").strip()
                 if val:
                     remote_filename = val
+            elif part.name == "print":
+                val = (await part.read()).decode("utf-8", errors="replace").strip().lower()
+                auto_print = val == "true"
             else:
                 log.debug(f"Unbekanntes Multipart-Feld: {part.name}")
 
         if not file_data:
             return web.json_response({"error": "no file received"}, status=400)
 
-        file_md5  = hashlib.md5(file_data).hexdigest()
-        file_size = len(file_data)
+        file_md5   = hashlib.md5(file_data).hexdigest()
+        file_size  = len(file_data)
 
         # Slicer-Zeitschätzung aus GCode-Header auslesen
         self._state["slicer_time"] = _parse_gcode_estimated_time(file_data)
@@ -553,9 +578,24 @@ class KobraXBridge:
 
         # Druck starten mit vollständigem Payload (inkl. serve-URL + md5 + size)
         serve_url = f"http://{request.host}/serve/{remote_filename}"
-        log.info(f"Starte Druck automatisch: {remote_filename}")
-        loop = asyncio.get_event_loop()
-        loop.run_in_executor(None, lambda: self._start_print(remote_filename, serve_url, file_md5, file_size))
+
+        # print=true im Multipart-Formular (Moonraker) oder Query-String → Druck starten
+        # print=false oder fehlt → nur hochladen
+        if not auto_print:
+            auto_print = request.rel_url.query.get("print", "false").lower() == "true"
+
+        # Thumbnail immer anfordern (Drucker antwortet async mit file/report)
+        self._thumbnail_b64 = ""
+        self.client.publish("file", "fileDetails", {"root": "local", "filename": remote_filename}, timeout=0)
+
+        if auto_print:
+            log.info(f"Upload+Print (print=true): {remote_filename}")
+            self._state["file_ready"] = ""
+            loop = asyncio.get_event_loop()
+            loop.run_in_executor(None, lambda: self._start_print(remote_filename, serve_url, file_md5, file_size))
+        else:
+            log.info(f"Nur hochgeladen (print=false): {remote_filename}")
+            self._state["file_ready"] = remote_filename
 
         # OctoPrint-kompatibler Response (OrcaSlicer wertet refs aus)
         return web.json_response({
@@ -578,6 +618,7 @@ class KobraXBridge:
         }, status=201)
 
     def _start_print(self, filename: str, url: str = "", md5: str = "", filesize: int = 0):
+        self._state["file_ready"] = ""
         default_slot = getattr(self._args, "default_ams_slot", "auto")
         all_loaded = [(i, s) for i, s in enumerate(self._ams_slots) if s.get("status") == 5]
         if default_slot != "auto":
@@ -628,11 +669,6 @@ class KobraXBridge:
                 "model_objects_skip_parts": [],
             },
         }
-        # Thumbnail vorab anfordern (Drucker antwortet async auf file/report)
-        self._thumbnail_b64 = ""
-        self.client.publish("file", "fileDetails",
-                            {"root": "local", "filename": filename}, timeout=0)
-
         log.info(f"print/start → {filename}  url={url}  ams={len(self._ams_slots)} slots")
         result = self.client.publish("print", "start", payload, timeout=15.0)
         if result:
@@ -645,7 +681,9 @@ class KobraXBridge:
             body = await request.json()
         except Exception:
             body = {}
-        filename = body.get("filename") or self._last_uploaded_file
+        filename = (request.rel_url.query.get("filename")
+                    or body.get("filename")
+                    or self._last_uploaded_file)
         if not filename:
             return web.json_response({"error": "no filename"}, status=400)
 
@@ -718,6 +756,12 @@ class KobraXBridge:
         await loop.run_in_executor(None, lambda: self.client.stop_print(taskid))
         return web.json_response({"result": "ok"})
 
+    async def handle_api_file_ready_clear(self, request):
+        self._state["file_ready"] = ""
+        self._thumbnail_b64 = ""
+        self._push_status_update()
+        return web.json_response({"result": "ok"})
+
     async def handle_octoprint_version(self, request):
         return web.json_response({
             "api":     "0.1",
@@ -845,6 +889,11 @@ main{flex:1;overflow-y:auto;padding:20px}
 .spd-bar{height:4px;border-radius:2px;background:var(--border);margin-top:10px;overflow:hidden}
 .spd-bar-fill{height:100%;border-radius:2px;background:linear-gradient(90deg,var(--accent2),var(--accent));transition:width .3s}
 
+/* ── TIME CARDS ── */
+.time-grid{display:grid;grid-template-columns:1fr 1fr 1fr;gap:8px;margin-top:8px}
+.time-block{background:var(--raised);border-radius:10px;padding:10px 12px}
+.time-label{font-size:10px;text-transform:uppercase;letter-spacing:.08em;color:var(--txt2);margin-bottom:4px}
+.time-val{font-size:20px;font-weight:700;font-family:var(--mono);color:var(--txt)}
 /* ── TEMPS ── */
 .temp-pair{display:grid;grid-template-columns:1fr 1fr;gap:12px}
 .temp-card-inner{display:grid;grid-template-columns:1fr 1fr;gap:12px}
@@ -1010,6 +1059,13 @@ nav.bottom-nav{display:none;position:fixed;bottom:0;left:0;right:0;
 <body>
 
 <div id="conn-error-banner" style="display:none;background:#c0392b;color:#fff;padding:10px 18px;font-size:14px;text-align:center;position:sticky;top:0;z-index:999;"></div>
+<div id="file-ready-banner" style="display:none;background:#1a6e3c;color:#fff;padding:10px 18px;font-size:14px;text-align:center;position:sticky;top:0;z-index:998;display:none;align-items:center;justify-content:center;gap:12px">
+  <span>📄 <span id="file-ready-name"></span></span>
+  <button id="file-ready-btn" onclick="startReadyFile()"
+    style="padding:5px 16px;background:#fff;color:#1a6e3c;border:none;border-radius:6px;font-weight:700;cursor:pointer;font-size:13px"></button>
+  <button id="file-cancel-btn" onclick="cancelReadyFile()"
+    style="padding:5px 16px;background:rgba(255,255,255,0.15);color:#fff;border:1px solid rgba(255,255,255,0.5);border-radius:6px;font-weight:700;cursor:pointer;font-size:13px"></button>
+</div>
 
 <header>
   <div class="logo">⬡ KX-Bridge</div>
@@ -1102,6 +1158,34 @@ nav.bottom-nav{display:none;position:fixed;bottom:0;left:0;right:0;
   </div>
 </div>
 
+<!-- ═══ AMS SLOT EDIT DIALOG ═══ -->
+<div class="modal-overlay" id="slot-edit-modal" onclick="if(event.target===this)closeSlotEdit()">
+  <div class="modal-box" style="max-width:340px">
+    <div style="display:flex;justify-content:space-between;align-items:center;margin-bottom:16px">
+      <span class="modal-title" id="slot-edit-title"></span>
+      <button onclick="closeSlotEdit()" style="background:none;border:none;color:var(--txt2);font-size:20px;cursor:pointer;line-height:1">✕</button>
+    </div>
+    <div style="display:flex;align-items:center;gap:16px;margin-bottom:20px">
+      <div id="slot-edit-preview" style="width:56px;height:56px;border-radius:50%;border:3px solid rgba(255,255,255,.2);flex-shrink:0"></div>
+      <div style="flex:1">
+        <div style="font-size:11px;color:var(--txt2);margin-bottom:4px" id="lbl-slot-color"></div>
+        <input type="color" id="slot-edit-color"
+          oninput="document.getElementById('slot-edit-preview').style.background=this.value"
+          style="width:100%;height:36px;border:1px solid var(--border);border-radius:6px;background:var(--raised);cursor:pointer;padding:2px">
+      </div>
+    </div>
+    <div style="margin-bottom:20px">
+      <div style="font-size:11px;color:var(--txt2);margin-bottom:6px" id="lbl-slot-material"></div>
+      <div style="display:flex;flex-wrap:wrap;gap:6px" id="slot-mat-btns">
+      </div>
+      <input type="text" id="slot-edit-mat"
+        oninput="highlightMatBtn(this.value)"
+        style="margin-top:8px;width:100%;padding:6px 10px;background:var(--raised);border:1px solid var(--border);border-radius:6px;color:var(--txt);font-size:13px;box-sizing:border-box">
+    </div>
+    <button class="modal-save" id="btn-slot-edit-save" onclick="saveSlotEdit()"></button>
+  </div>
+</div>
+
 <div class="layout">
   <nav class="sidebar">
     <button class="nav-btn active" onclick="showPanel('dashboard')" id="nb-dashboard">
@@ -1128,7 +1212,7 @@ nav.bottom-nav{display:none;position:fixed;bottom:0;left:0;right:0;
             </div>
           </div>
           <div class="cam-wrap" id="cam-wrap">
-            <div class="cam-placeholder" id="cam-placeholder">📷 Kamera nicht gestartet</div>
+            <div class="cam-placeholder" id="cam-placeholder"><span id="cam-placeholder-txt">📷 Kamera nicht gestartet</span></div>
             <div class="cam-spinner" id="cam-spinner"></div>
             <img id="cam-img" style="display:none;width:100%;height:auto" alt="Kamera">
             <div class="cam-overlay" id="cam-overlay" style="display:none">
@@ -1143,14 +1227,26 @@ nav.bottom-nav{display:none;position:fixed;bottom:0;left:0;right:0;
           <div class="card-title"><span>◉</span> <span id="d-card-progress">Fortschritt</span></div>
           <img id="d-thumbnail" src="" alt="" style="display:none;width:100%;max-height:160px;object-fit:contain;border-radius:8px;background:#111;margin-bottom:10px">
           <div class="pct-big"><span id="d-pct">0</span><small>%</small></div>
-          <div class="progress-bar" style="margin:8px 0"><div class="progress-fill" id="d-pbar" style="width:0%"></div></div>
-          <div class="meta-row" style="margin-top:6px">
-            <span id="d-elapsed">–</span>
-            <span id="d-remain" style="color:var(--acc)">–</span>
-            <span id="d-layers" class="layer-badge">–</span>
+          <div style="display:flex;align-items:center;gap:10px;margin:8px 0">
+            <div class="progress-bar" style="flex:1;margin:0"><div class="progress-fill" id="d-pbar" style="width:0%"></div></div>
+            <div class="time-block" style="padding:6px 10px;min-width:72px;text-align:center;flex-shrink:0">
+              <div class="time-label" id="d-lbl-layers"></div>
+              <div class="time-val" style="font-size:16px" id="d-layers">–</div>
+            </div>
           </div>
-          <div class="meta-row" style="margin-top:4px;font-size:0.82em;opacity:0.7" id="d-slicer-row">
-            <span id="d-slicer-label"></span><span id="d-slicer-time" style="margin-left:4px">–</span>
+          <div class="time-grid">
+            <div class="time-block">
+              <div class="time-label" id="d-lbl-elapsed"></div>
+              <div class="time-val" id="d-elapsed">–</div>
+            </div>
+            <div class="time-block" id="d-slicer-row" style="display:none">
+              <div class="time-label" id="d-slicer-label"></div>
+              <div class="time-val" id="d-slicer-time">–</div>
+            </div>
+            <div class="time-block" style="color:var(--acc)">
+              <div class="time-label" id="d-lbl-remain"></div>
+              <div class="time-val" id="d-remain" style="color:var(--acc)">–</div>
+            </div>
           </div>
           <div class="fname" id="d-fname" title="" style="margin-top:6px">–</div>
           <div class="ctrl-btns" id="d-ctrl-btns" style="margin-top:12px">
@@ -1308,7 +1404,7 @@ nav.bottom-nav{display:none;position:fixed;bottom:0;left:0;right:0;
           <a id="btn-log-dl" href="/api/log/download" download="kx-bridge.log"
              style="font-size:12px;padding:4px 10px;background:var(--raised);border-radius:6px;color:var(--txt2);text-decoration:none">⬇ Download</a>
         </div>
-        <div style="display:flex;gap:8px;margin-bottom:8px;flex-wrap:wrap;align-items:center">
+        <div style="display:flex;gap:6px;margin-bottom:6px;flex-wrap:wrap;align-items:center">
           <input id="log-filter" type="text" placeholder="Filter…"
             oninput="renderLog()"
             style="flex:1;min-width:120px;padding:5px 10px;background:var(--raised);border:1px solid var(--border);border-radius:6px;color:var(--txt);font-size:12px;font-family:var(--mono)">
@@ -1317,7 +1413,18 @@ nav.bottom-nav{display:none;position:fixed;bottom:0;left:0;right:0;
           <button onclick="consoleLogs=[];renderLog()"
             style="font-size:12px;padding:5px 10px;border-radius:6px;border:1px solid var(--border);background:var(--raised);color:var(--txt2);cursor:pointer">✕ Clear</button>
         </div>
-        <div class="console" id="console-log" style="height:calc(100vh - 220px);min-height:200px" onscroll="onLogScroll()"></div>
+        <div style="display:flex;gap:5px;margin-bottom:8px;flex-wrap:wrap">
+          <span style="font-size:11px;color:var(--txt2);align-self:center;margin-right:2px">Dir:</span>
+          <button class="log-dir-btn active" id="logdir-all"  onclick="setLogDir('all')"  style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer"></button>
+          <button class="log-dir-btn"        id="logdir-rx"   onclick="setLogDir('rx')"   style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">RX</button>
+          <button class="log-dir-btn"        id="logdir-tx"   onclick="setLogDir('tx')"   style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">TX</button>
+          <span style="font-size:11px;color:var(--txt2);align-self:center;margin-left:6px;margin-right:2px">Topic:</span>
+          <button class="log-topic-btn" data-topic="multiColorBox" onclick="setLogTopic('multiColorBox')" style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">AMS</button>
+          <button class="log-topic-btn" data-topic="print"         onclick="setLogTopic('print')"         style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">print</button>
+          <button class="log-topic-btn" data-topic="info"          onclick="setLogTopic('info')"          style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">info</button>
+          <button class="log-topic-btn" data-topic="status"        onclick="setLogTopic('status')"        style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">status</button>
+        </div>
+        <div class="console" id="console-log" style="height:calc(100vh - 260px);min-height:160px" onscroll="onLogScroll()"></div>
       </div>
     </div>
   </main>
@@ -1352,7 +1459,7 @@ var LANG_DE={
   header_status_standby:'Bereit',header_status_printing:'Druckt',header_status_complete:'Fertig',header_status_error:'Fehler',
   kobra_free:'Bereit',kobra_busy:'Beschäftigt',kobra_printing:'Druckt',kobra_preheating:'Aufheizen',kobra_auto_leveling:'Nivellierung',kobra_checking:'Prüfung',kobra_updated:'Aktualisierung',kobra_init:'Initialisierung',kobra_pausing:'Pausiert...',kobra_paused:'Pausiert',kobra_resuming:'Fortsetzen...',kobra_resumed:'Fortgesetzt',kobra_stopping:'Stoppt...',kobra_stoped:'Gestoppt',kobra_finished:'Abgeschlossen',kobra_failed:'Fehler',kobra_canceled:'Abgebrochen',kobra_offline:'Offline',
   nav_dashboard:'Dashboard',nav_print:'Druck',nav_temps:'Temperaturen',nav_motion:'Achsen',nav_ams:'AMS',nav_extras:'Licht / Lüfter',nav_console:'Konsole',
-  card_progress:'Fortschritt',card_temps:'Temperaturen',card_light_fan:'Lüfter',card_speed:'Druckgeschwindigkeit',card_cam:'Kamera',lbl_elapsed:'Verstrichen',lbl_remaining:'verbleibend',lbl_slicer_time:'Slicer-Schätzung:',
+  card_progress:'Fortschritt',card_temps:'Temperaturen',card_light_fan:'Lüfter',card_speed:'Druckgeschwindigkeit',card_cam:'Kamera',lbl_elapsed:'Verstrichen:',lbl_remaining:'Restzeit:',lbl_slicer_time:'Slicer-Schätzung:',lbl_layers:'Layer',
   speed_silent:'🐢 Leise',speed_normal:'⚡ Normal',speed_sport:'🚀 Sport',
   lbl_light:'💡 Licht',lbl_feed:'Einziehen',lbl_unload:'Ausziehen',
   cam_placeholder:'📷 Kamera nicht gestartet',btn_cam_start:'▶ Kamera',btn_cam_stop:'◼ Kamera',
@@ -1374,13 +1481,19 @@ var LANG_DE={
   update_check:'Auf Updates prüfen',update_checking:'Prüfe...',update_available:'verfügbar',update_none:'Bereits aktuell',
   update_apply:'Jetzt installieren',update_applying:'Lade herunter...',update_restarting:'Starte neu...',update_error:'Fehler',
   btn_connect:'⚡ Verbinden',btn_disconnect:'✕ Trennen',
-  lbl_conn_error:'Verbindungsfehler:'
+  lbl_conn_error:'Verbindungsfehler:',
+  slot_edit_title:'Slot bearbeiten',slot_edit_color:'Farbe',slot_edit_material:'Material',
+  slot_edit_save:'💾 Speichern',slot_edit_custom:'z.B. PLA, PETG, ABS…',
+  slot_edit_ok:'AMS Slot',
+  log_dir_all:'Alle',
+  file_ready_btn:'▶ Druck starten',
+  file_cancel_btn:'✕ Abbrechen'
 };
 var LANG_EN={
   header_status_standby:'Ready',header_status_printing:'Printing',header_status_complete:'Complete',header_status_error:'Error',
   kobra_free:'Ready',kobra_busy:'Busy',kobra_printing:'Printing',kobra_preheating:'Preheating',kobra_auto_leveling:'Auto Leveling',kobra_checking:'Checking',kobra_updated:'Updating',kobra_init:'Initializing',kobra_pausing:'Pausing...',kobra_paused:'Paused',kobra_resuming:'Resuming...',kobra_resumed:'Resumed',kobra_stopping:'Stopping...',kobra_stoped:'Stopped',kobra_finished:'Finished',kobra_failed:'Error',kobra_canceled:'Cancelled',kobra_offline:'Offline',
   nav_dashboard:'Dashboard',nav_print:'Print',nav_temps:'Temperatures',nav_motion:'Motion',nav_ams:'AMS',nav_extras:'Light / Fan',nav_console:'Console',
-  card_progress:'Progress',card_temps:'Temperatures',card_light_fan:'Fan',card_speed:'Print Speed',card_cam:'Camera',lbl_elapsed:'Elapsed',lbl_remaining:'remaining',lbl_slicer_time:'Slicer estimate:',
+  card_progress:'Progress',card_temps:'Temperatures',card_light_fan:'Fan',card_speed:'Print Speed',card_cam:'Camera',lbl_elapsed:'Elapsed:',lbl_remaining:'Remaining:',lbl_slicer_time:'Slicer estimate:',lbl_layers:'Layer',
   speed_silent:'🐢 Silent',speed_normal:'⚡ Normal',speed_sport:'🚀 Sport',
   lbl_light:'💡 Light',lbl_feed:'Load',lbl_unload:'Unload',
   cam_placeholder:'📷 Camera not started',btn_cam_start:'▶ Camera',btn_cam_stop:'◼ Camera',
@@ -1402,7 +1515,13 @@ var LANG_EN={
   update_check:'Check for Updates',update_checking:'Checking...',update_available:'available',update_none:'Already up to date',
   update_apply:'Install Now',update_applying:'Downloading...',update_restarting:'Restarting...',update_error:'Error',
   btn_connect:'⚡ Connect',btn_disconnect:'✕ Disconnect',
-  lbl_conn_error:'Connection error:'
+  lbl_conn_error:'Connection error:',
+  slot_edit_title:'Edit Slot',slot_edit_color:'Color',slot_edit_material:'Material',
+  slot_edit_save:'💾 Save',slot_edit_custom:'e.g. PLA, PETG, ABS…',
+  slot_edit_ok:'AMS Slot',
+  log_dir_all:'All',
+  file_ready_btn:'▶ Start Print',
+  file_cancel_btn:'✕ Cancel'
 };
 var currentLang='de';
 var T=LANG_DE;
@@ -1428,6 +1547,10 @@ function applyLang(){
   setText('d-card-speed',T.card_speed);
   setText('d-card-cam',T.card_cam);
   setText('d-card-ams',T.panel_ams_title);
+  setText('d-lbl-elapsed',T.lbl_elapsed);
+  setText('d-lbl-remain',T.lbl_remaining);
+  setText('d-slicer-label',T.lbl_slicer_time);
+  setText('d-lbl-layers',T.lbl_layers);
   setText('d-lbl-light',T.lbl_light);
   setText('d-lbl-bed',T.label_bed);
   // Dashboard buttons
@@ -1479,6 +1602,14 @@ function applyLang(){
   document.querySelectorAll('.lbl-unload').forEach(e=>e.textContent=T.lbl_unload);
   // conn-btn text (nur wenn nicht im Übergangszustand)
   updateConnBtn();
+  // Slot-Edit-Dialog
+  setText('lbl-slot-color',T.slot_edit_color);
+  setText('lbl-slot-material',T.slot_edit_material);
+  setText('btn-slot-edit-save',T.slot_edit_save);
+  var mi=document.getElementById('slot-edit-mat');if(mi)mi.setAttribute('placeholder',T.slot_edit_custom);
+  setText('logdir-all',T.log_dir_all);
+  setText('file-ready-btn',T.file_ready_btn);
+  setText('file-cancel-btn',T.file_cancel_btn);
 }
 function setText(id,txt){var el=document.getElementById(id);if(el)el.textContent=txt;}
 (function(){
@@ -1510,6 +1641,8 @@ function showPanel(id){
 var consoleLogs=[];
 var logAutoScroll=true;
 var logBadgeCount=0;
+var logDirFilter='all';   // 'all'|'rx'|'tx'
+var logTopicFilter='';    // '' = no topic filter
 
 function clog(msg,cls){
   cls=cls||'msg-info';
@@ -1535,14 +1668,41 @@ function _appendLog(entry,forceCls){
   }
   renderLog();
 }
+function setLogDir(dir){
+  logDirFilter=dir;
+  document.querySelectorAll('.log-dir-btn').forEach(function(b){
+    b.style.background=b.id==='logdir-'+dir?'var(--accent)':'var(--raised)';
+    b.style.color=b.id==='logdir-'+dir?'#fff':'var(--txt2)';
+  });
+  renderLog();
+}
+function setLogTopic(topic){
+  var inp=document.getElementById('log-filter');
+  var active=inp.value===topic;
+  inp.value=active?'':topic;
+  document.querySelectorAll('.log-topic-btn').forEach(function(b){
+    var on=!active&&b.getAttribute('data-topic')===topic;
+    b.style.background=on?'var(--accent)':'var(--raised)';
+    b.style.color=on?'#fff':'var(--txt2)';
+  });
+  renderLog();
+}
 function renderLog(){
   var el=document.getElementById('console-log');
   if(!el)return;
   var filter=(document.getElementById('log-filter')||{}).value||'';
   var fl=filter.toLowerCase();
-  var rows=fl?consoleLogs.filter(l=>l.msg.toLowerCase().includes(fl)):consoleLogs;
+  var rows=consoleLogs.filter(function(l){
+    var m=l.msg;
+    if(logDirFilter==='rx'&&!/ RX[ (]/.test(m))return false;
+    if(logDirFilter==='tx'&&!/ TX[ (]/.test(m))return false;
+    if(fl&&!m.toLowerCase().includes(fl))return false;
+    return true;
+  });
+  var savedScroll=logAutoScroll?null:el.scrollTop;
   el.innerHTML=rows.map(l=>`<div><span class="ts">${l.ts}</span><span class="${l.cls}">${escHtml(l.msg)}</span></div>`).join('');
   if(logAutoScroll)el.scrollTop=el.scrollHeight;
+  else if(savedScroll!==null)el.scrollTop=savedScroll;
 }
 function onLogScroll(){
   var el=document.getElementById('console-log');
@@ -1585,6 +1745,13 @@ function applyState(){
   // connection error banner
   var banner=document.getElementById('conn-error-banner');
   if(banner){if(s.connection_error){banner.textContent='⚠ '+(T.lbl_conn_error||'Connection error:')+' '+s.connection_error;banner.style.display='block';}else{banner.style.display='none';}}
+  var frb=document.getElementById('file-ready-banner');
+  if(frb){
+    if(s.file_ready&&s.print_state==='standby'){
+      document.getElementById('file-ready-name').textContent=s.file_ready;
+      frb.style.display='flex';
+    }else{frb.style.display='none';}
+  }
   // header
   var b=document.getElementById('h-badge');
   b.className='hbadge '+s.print_state;
@@ -1611,16 +1778,12 @@ function applyState(){
   var layers=s.curr_layer&&s.total_layers?'L '+s.curr_layer+' / '+s.total_layers:'–';
   var dlayers=document.getElementById('d-layers');if(dlayers)dlayers.textContent=layers;
 
-  var elapsed=fmtTime(s.print_duration);
-  var delapsed=document.getElementById('d-elapsed');if(delapsed)delapsed.textContent=elapsed;
-  var remain=s.remain_time>0?'≈ '+fmtTime(s.remain_time)+' '+T.lbl_remaining:'';
-  var dremain=document.getElementById('d-remain');if(dremain)dremain.textContent=remain;
-
+  var delapsed=document.getElementById('d-elapsed');if(delapsed)delapsed.textContent=fmtTime(s.print_duration);
+  var dremain=document.getElementById('d-remain');if(dremain)dremain.textContent=s.remain_time>0?fmtTime(s.remain_time):'–';
   var dslrow=document.getElementById('d-slicer-row');
   var dsltime=document.getElementById('d-slicer-time');
-  var dsllbl=document.getElementById('d-slicer-label');
   if(dslrow&&dsltime){
-    if(s.slicer_time>0){dslrow.style.display='';if(dsllbl)dsllbl.textContent=T.lbl_slicer_time;dsltime.textContent=fmtTime(s.slicer_time);}
+    if(s.slicer_time>0){dslrow.style.display='';dsltime.textContent=fmtTime(s.slicer_time);}
     else{dslrow.style.display='none';}
   }
 
@@ -1657,6 +1820,7 @@ function applyState(){
 
   // AMS
   if(s.ams_slots&&s.ams_slots.length){
+    window._amsSlots=s.ams_slots;
     var html='';
     s.ams_slots.forEach(function(slot,i){
       var empty=slot.status!==5;
@@ -1664,11 +1828,13 @@ function applyState(){
       var col='rgb('+rgb[0]+','+rgb[1]+','+rgb[2]+')';
       var active=slot.status===1||slot.active;
       var pct=empty?T.ams_empty:(slot.consumables_percent!=null?slot.consumables_percent+'%':'–');
-      html+='<div class="ams-slot'+(active?' active':'')+(empty?' empty':'')+ '" style="--slot-color:'+col+';opacity:'+(empty?0.4:1)+'">'
+      var idx=slot.index!=null?slot.index:i;
+      html+='<div class="ams-slot'+(active?' active':'')+(empty?' empty':'')+ '" style="--slot-color:'+col+';opacity:'+(empty?0.4:1)+';cursor:pointer" onclick="openSlotEdit('+i+')">'
         +'<div class="slot-circle" style="background:'+col+'"></div>'
         +'<div class="slot-material">'+(empty?'–':(slot.type||slot.material_type||'–'))+'</div>'
-        +'<div class="slot-label">Slot '+(slot.index!=null?slot.index+1:i+1)+'</div>'
+        +'<div class="slot-label">Slot '+(idx+1)+'</div>'
         +'<div class="slot-label" style="font-size:10px;color:var(--txt2)">'+pct+'</div>'
+        +'<div style="font-size:9px;color:var(--txt2);margin-top:2px">✏</div>'
         +'</div>';
     });
     document.getElementById('ams-slots').innerHTML=html;
@@ -1767,6 +1933,78 @@ function openSettings(){
 function closeSettings(){
   document.getElementById('settings-modal').classList.remove('open');
 }
+
+// ── AMS Slot Edit ──
+var _slotEditIndex=-1;
+var _MAT_PRESETS=['PLA','PETG','ABS','ASA','TPU','PA','PC','HIPS'];
+function openSlotEdit(i){
+  var slot=(window._amsSlots||[])[i]||{};
+  var index=slot.index!=null?slot.index:i;
+  _slotEditIndex=index;
+  document.getElementById('slot-edit-title').textContent=T.slot_edit_title+' '+(index+1);
+  var rgb=Array.isArray(slot.color)?slot.color:[128,128,128];
+  var hex='#'+rgb.map(function(v){return('0'+Math.min(255,v).toString(16)).slice(-2)}).join('');
+  var ci=document.getElementById('slot-edit-color');
+  ci.value=hex;
+  document.getElementById('slot-edit-preview').style.background=hex;
+  var mat=(slot.type||'PLA').toUpperCase();
+  document.getElementById('slot-edit-mat').value=mat;
+  var btns=document.getElementById('slot-mat-btns');
+  btns.innerHTML=_MAT_PRESETS.map(function(m){
+    return '<button class="mat-preset-btn" data-mat="'+m+'" onclick="selectMatPreset(\''+m+'\')" '
+      +'style="padding:4px 10px;border-radius:6px;border:1px solid var(--border);cursor:pointer;font-size:12px;'
+      +(m===mat?'background:var(--accent);color:#fff':'background:var(--raised);color:var(--txt2)')+'">'+m+'</button>';
+  }).join('');
+  document.getElementById('slot-edit-modal').classList.add('open');
+}
+function closeSlotEdit(){
+  document.getElementById('slot-edit-modal').classList.remove('open');
+}
+function startReadyFile(){
+  var btn=document.getElementById('file-ready-btn');
+  if(btn){btn.disabled=true;btn.textContent='…';}
+  post('/printer/print/start',{filename:S.file_ready})
+    .then(function(r){return r.json();})
+    .then(function(r){
+      document.getElementById('file-ready-banner').style.display='none';
+      if(btn){btn.disabled=false;setText('file-ready-btn',T.file_ready_btn);}
+    })
+    .catch(function(e){
+      clog((T.log_error||'Error:')+' '+e,'msg-err');
+      if(btn){btn.disabled=false;setText('file-ready-btn',T.file_ready_btn);}
+    });
+}
+function cancelReadyFile(){
+  post('/api/file_ready/clear',{})
+    .then(function(){document.getElementById('file-ready-banner').style.display='none';});
+}
+function selectMatPreset(m){
+  document.getElementById('slot-edit-mat').value=m;
+  highlightMatBtn(m);
+}
+function highlightMatBtn(val){
+  document.querySelectorAll('.mat-preset-btn').forEach(function(b){
+    var on=b.getAttribute('data-mat')===val.toUpperCase();
+    b.style.background=on?'var(--accent)':'var(--raised)';
+    b.style.color=on?'#fff':'var(--txt2)';
+  });
+}
+function hexToRgb(hex){
+  var r=parseInt(hex.slice(1,3),16),g=parseInt(hex.slice(3,5),16),b=parseInt(hex.slice(5,7),16);
+  return[r,g,b];
+}
+function saveSlotEdit(){
+  var hex=document.getElementById('slot-edit-color').value;
+  var mat=document.getElementById('slot-edit-mat').value.trim().toUpperCase()||'PLA';
+  var color=hexToRgb(hex);
+  post('/api/ams/set_slot',{index:_slotEditIndex,type:mat,color:color})
+    .then(function(r){return r.json();})
+    .then(function(r){
+      closeSlotEdit();
+      clog((T.slot_edit_ok||'AMS Slot')+' '+(_slotEditIndex+1)+': '+mat+' '+hex,'msg-ok');
+    })
+    .catch(function(e){clog('Fehler: '+e,'msg-err');});
+}
 document.addEventListener('DOMContentLoaded',function(){
   document.getElementById('s-printer-ip').addEventListener('input',function(){
     var hint=document.getElementById('lbl-ip-hint');
@@ -2084,6 +2322,35 @@ function toggleCam(){if(camOn)camStop();else camStart()}
         self._state["print_speed_mode"] = mode
         return web.json_response({"result": "ok"})
 
+    async def handle_api_ams_set_slot(self, request):
+        try:
+            body = await request.json()
+        except Exception:
+            body = {}
+        index  = int(body.get("index", 0))
+        mat    = str(body.get("type", "PLA")).upper()
+        color  = body.get("color", [255, 255, 255])
+        if not (isinstance(color, list) and len(color) == 3):
+            return web.json_response({"error": "color must be [r,g,b]"}, status=400)
+        loop = asyncio.get_event_loop()
+        def _send():
+            resp = self.client.publish(
+                "multiColorBox", "setInfo",
+                {"multi_color_box": [{"id": -1, "slots": [{"index": index, "type": mat, "color": color}]}]},
+                timeout=5
+            )
+            log.info(f"setInfo slot={index} type={mat} color={color} → {resp}")
+            return resp
+        resp = await loop.run_in_executor(None, _send)
+        if resp and resp.get("code") == 200:
+            # Update cached slot immediately
+            for s in self._ams_slots:
+                if s.get("index") == index:
+                    s["type"]  = mat
+                    s["color"] = color
+                    break
+        return web.json_response({"result": "ok"})
+
     async def handle_api_ams_feed(self, request):
         try:
             body = await request.json()
@@ -2336,6 +2603,7 @@ function toggleCam(){if(camOn)camStop();else camStart()}
             "ams_loaded_slot":  self._ams_loaded_slot,
             "thumbnail":        self._thumbnail_b64,
             "connection_error": s["connection_error"],
+            "file_ready":       s["file_ready"],
             "version":          self._read_version(),
         })
 
@@ -2816,7 +3084,7 @@ def _mqtt_error_msg(exc: Exception) -> str:
 
 
 def build_app(bridge: KobraXBridge) -> web.Application:
-    app = web.Application()
+    app = web.Application(client_max_size=256 * 1024 * 1024)  # 256 MB für große GCode-Dateien
     r = app.router
 
     # Moonraker API
@@ -2850,6 +3118,7 @@ def build_app(bridge: KobraXBridge) -> web.Application:
     r.add_post("/api/disconnect",          bridge.handle_api_disconnect)
     r.add_post("/api/speed",               bridge.handle_api_speed)
     r.add_post("/api/ams/feed",            bridge.handle_api_ams_feed)
+    r.add_post("/api/ams/set_slot",        bridge.handle_api_ams_set_slot)
     r.add_post("/api/axis",                bridge.handle_api_axis)
     r.add_post("/api/temperature",         bridge.handle_api_temperature)
     r.add_get("/api/camera",               bridge.handle_api_camera)
@@ -2862,6 +3131,7 @@ def build_app(bridge: KobraXBridge) -> web.Application:
     r.add_post("/api/settings",            bridge.handle_api_settings_post)
     r.add_get("/api/update/check",         bridge.handle_api_update_check)
     r.add_post("/api/update/apply",        bridge.handle_api_update_apply)
+    r.add_post("/api/file_ready/clear",    bridge.handle_api_file_ready_clear)
     r.add_get("/api/log/stream",           bridge.handle_api_log_stream)
     r.add_get("/api/log/download",         bridge.handle_api_log_download)
     r.add_get("/serve/{filename}",         bridge.handle_serve_file)

requirements.txt

@@ -1,2 +1,4 @@
 aiohttp>=3.9
 imageio-ffmpeg>=0.4.9
+requests>=2.30.0
+pycryptodome>=3.20.0

start.sh

@@ -15,6 +15,15 @@ if [[ ! -f .env ]]; then
     fi
 fi
 
+# config/ Verzeichnis und config.ini.example anlegen falls nicht vorhanden
+mkdir -p config
+if [[ ! -f config/config.ini ]] && [[ ! -f config/config.ini.example ]]; then
+    if [[ -f config.ini.example ]]; then
+        cp config.ini.example config/config.ini.example
+        echo "[start] config/config.ini.example aus config.ini.example erstellt"
+    fi
+fi
+
 # Docker verfügbar?
 if ! docker info > /dev/null 2>&1; then
     echo "[start] Docker nicht gefunden – bitte Docker installieren."