Frees up the printer's own limited storage automatically once a print
finishes, while keeping the file safely in the bridge's own GCode store.
Deliberately scoped to files uploaded through the bridge itself only
(matched via the GCode store, same lookup the job-history feature already
uses) - a print started directly from the printer or Anycubic Slicer has
no backup anywhere else, so it's never touched regardless of the setting.
Only triggers on a clean "finished" state, not on stopped/canceled prints,
since the user may want to retry those.
Off by default. The delete request is fire-and-forget, sent directly from
_on_print() (which runs on the MQTT reader thread) rather than through the
existing _wait_for_file_action() helper - that helper blocks waiting for a
reply dispatched from that same thread, which would deadlock if called
from within it.
Issue #103: the printer has no MQTT-level command to power off or enter
standby, so users on a separate-room setup have to physically walk over
or use a smart plug (e.g. Tasmota) manually. Added per-printer
power_on_url/power_off_url/power_status_url config (Settings > Power
Switch) and a power button with a live on/off indicator on each printer's
card in the Printers grid - plain HTTP GET calls, no Moonraker
device_power dependency.
Issue #104: the stable-release update check only ever requested the
single newest Gitea release (limit=1) regardless of type. Since
nightly/dev prereleases publish far more often than stable ones, that
newest release is almost always a prerelease, so the "not a prerelease"
filter found nothing and reported "no stable releases found" even
though a newer stable release existed further back in the list.
Fixed by requesting enough releases (limit=20) to look past a run of
prereleases.
Also fixes a related pre-existing bug surfaced while testing #103's
config: configparser's default string interpolation rejected any
config.ini value containing a literal '%' (ValueError: invalid
interpolation syntax) - this broke saving Tasmota-style power URLs
(cmnd=Power%20on) and would have broken any other value with a '%'
character. Fixed globally with interpolation=None on every
ConfigParser() instantiation in config_loader.py and
kobrax_moonraker_bridge.py.
- Dashboard reprint now delegates to _start_print with gcode_filaments from DB
so the used_paint_indices filter applies correctly (Issue #84)
- Startup log no longer shows 0.0.0.0 — actual LAN IP is displayed (Issue #86)
- New vibration_compensation setting: toggle in Settings UI activates resonance
compensation before each print, follows exact auto_leveling pattern (Issue #85)
