release: v0.9.7

Reviewed-on: viewit/KX-Bridge-Release#19

CHANGELOG.de.md

@@ -1,21 +1,28 @@
 # Changelog
 
-## [0.9.6.1] – 2026-05-02
+## [0.9.7] – 2026-05-08
+
+### Neu
+- **fetch_credentials-Tool:** Ruft MQTT-Credentials direkt vom Drucker per HTTP ab — kein laufender Anycubic Slicer nötig, nur die Drucker-IP. Linux-Binary und Windows-EXE im Release enthalten. (Beitrag von bebu, PR #19)
 
 ### Fixes
-- **Upload-Banner:** Banner wird nach Stopp/Abbruch nicht mehr erneut angezeigt — `file_ready` und Thumbnail werden jetzt gecleared wenn der Drucker `stoped` oder `canceled` meldet
+- **Upload großer GCode-Dateien:** Dateien >1 MB wurden mit HTTP 413 abgelehnt — aiohttp `client_max_size` auf 256 MB erhöht
+- **Upload-Timeout:** Socket-Timeout nach GCode-Upload von 10s auf 120s erhöht — große Dateien führten zu einem Absturz der Bridge mit leerer Antwort während der Drucker noch verarbeitete
 
 ---
 
 ## [0.9.6] – 2026-05-02
 
 ### Neu
-- **Fortschritts-Karte:** Verstrichen / Slicer-Schätzung / Restzeit als Mini-Cards (gleicher Stil wie Temperaturkarten)
-- **Layer-Mini-Card:** Layerzahl als Mini-Card neben der Fortschrittsleiste
+- **Licht-Status-Synchronisierung:** Ein/Aus-Zustand und Helligkeit des Druckerlichts werden jetzt live über `light/report` MQTT gelesen — der Licht-Toggle in der UI spiegelt den echten Druckerstatus wider
+- **Zeit-Minicards:** Fortschritts-Panel zeigt jetzt drei Karten — Verstrichen, Restzeit und Slicer-Schätzung — sowie einen Layer-Badge neben dem Fortschrittsbalken
+- **Slicer-Schätzzeit aus GCode:** Geschätzte Druckzeit wird direkt aus der hochgeladenen GCode-Datei gelesen (OrcaSlicer: `; total estimated time:` am Dateiende, PrusaSlicer: `; estimated printing time` im Header)
+- **Erweiterte Druckerstatus-Strings:** `pausing`, `paused`, `resuming`, `resumed`, `stopping`, `stopped` hinzugefügt — fehlten bisher und ließen die UI rohe Status-Codes bei Pause/Fortsetzen/Stopp anzeigen
 
 ### Fixes
-- **Slicer-Schätzzeit:** OrcaSlicer schreibt die geschätzte Zeit ans Ende der GCode-Datei — Bridge liest jetzt auch die letzten 64 KB (vorher nur die ersten 16 KB)
-- **start.sh:** `config/`-Verzeichnis wird jetzt automatisch erstellt und `config.ini.example` wird beim ersten Start hineinkopiert (Issue #15)
+- **file_ready-Banner:** Upload-Banner wird nach Stopp oder Abbruch eines Drucks nicht mehr angezeigt
+- **Zeitanzeige bei Stopp/Abbruch:** Verstrichen-, Restzeit- und Slicer-Schätzung werden auf null zurückgesetzt wenn ein Druck gestoppt oder abgebrochen wird
+- **start.sh:** `config/`-Verzeichnis und `config.ini.example` werden beim ersten Start automatisch angelegt wenn sie fehlen (Issue #15)
 
 ---
 

CHANGELOG.md

@@ -1,21 +1,28 @@
 # Changelog
 
-## [0.9.6.1] – 2026-05-02
+## [0.9.7] – 2026-05-08
+
+### New
+- **fetch_credentials tool:** Fetches and decrypts MQTT credentials directly from the printer via HTTP — no running Anycubic Slicer required, only the printer IP needed. Linux binary and Windows EXE included in release. (Contributed by bebu, PR #19)
 
 ### Fixes
-- **Upload banner:** Banner is no longer shown again after print stop/cancel — `file_ready` and thumbnail are now cleared when the printer reports `stoped` or `canceled`
+- **Large GCode upload:** Files >1 MB were rejected with HTTP 413 — aiohttp `client_max_size` raised to 256 MB
+- **Upload timeout:** Socket timeout after GCode upload raised from 10s to 120s — large files caused the bridge to crash with an empty response while the printer was still processing
 
 ---
 
 ## [0.9.6] – 2026-05-02
 
 ### New
-- **Progress card:** Elapsed / Slicer estimate / Remaining time shown as mini-cards (same style as temperature cards)
-- **Layer mini-card:** Layer count displayed as mini-card next to the progress bar
+- **Light status sync:** Light on/off state and brightness are now read live from the printer via `light/report` MQTT message — the light toggle in the UI reflects the actual printer state
+- **Time mini-cards:** Progress panel now shows three cards — Elapsed, Remaining and Slicer estimate — with a layer counter badge next to the progress bar
+- **Slicer estimate from GCode:** Estimated print time is parsed directly from the uploaded GCode file (OrcaSlicer: `; total estimated time:` at end of file, PrusaSlicer: `; estimated printing time` in header)
+- **Extended printer status strings:** Added `pausing`, `paused`, `resuming`, `resumed`, `stopping`, `stopped` states — previously missing, causing the UI to show raw status codes during pause/resume/stop transitions
 
 ### Fixes
-- **Slicer estimate time:** OrcaSlicer writes the estimated time at the end of the GCode file — bridge now also scans the last 64 KB (previously only the first 16 KB were checked)
-- **start.sh:** `config/` directory is now created automatically and `config.ini.example` is copied into it on first run (Issue #15)
+- **file_ready banner:** Upload banner is no longer shown after print stop or cancel
+- **Timers on stop/cancel:** Elapsed, remaining and slicer estimate times are reset to zero when a print is stopped or cancelled
+- **start.sh:** `config/` directory and `config.ini.example` are now created automatically on first run if missing (Issue #15)
 
 ---
 

README.de.md

@@ -2,7 +2,7 @@
 
 # KX-Bridge – Anycubic Kobra X
 
-**Version:** 0.9.6.1
+**Version:** 0.9.7
 
 Steuere deinen **Anycubic Kobra X** mit OrcaSlicer — ohne Klipper, ohne Raspberry Pi.  
 KX-Bridge ist eine Moonraker-kompatible Bridge die direkt mit dem Drucker kommuniziert.
@@ -18,13 +18,23 @@ Den Kobra X in den LAN-Modus versetzen:
 
 ### Schritt 2 – Credentials holen
 
-Die MQTT-Zugangsdaten sind druckerspezifisch. So holst du sie:
+Die MQTT-Zugangsdaten sind druckerspezifisch und an die Hardware gebunden.
+
+**Option A – fetch_credentials (empfohlen):**
+
+```bash
+fetch_credentials --ip 192.168.x.x --write-config
+```
+
+Holt die Credentials direkt per HTTP vom Drucker und schreibt sie automatisch in `config/config.ini`. Benötigt nur die Drucker-IP — kein Slicer nötig.
+
+**Option B – extract_credentials (wenn Drucker-IP unbekannt):**
 
 1. **AnycubicSlicerNext** öffnen und Drucker verbinden (bis Status angezeigt wird)
-2. **`extract_credentials.exe`** (Windows) oder **`extract_credentials`** (Linux) ausführen — gibt Username, Password, Device-ID und Drucker-IP aus
-3. Werte merken / kopieren
+2. **`extract_credentials`** ausführen — gibt Username, Password, Device-ID und Drucker-IP aus
+3. Werte im Web-UI eintragen (⚙-Menü)
 
-> **Download:** [gitea.it-drui.de/viewit/KX-Bridge-Release/releases](https://gitea.it-drui.de/viewit/KX-Bridge-Release/releases) → `extract_credentials.exe` (Windows) / `extract_credentials` (Linux) im jeweiligen Release-Asset
+> **Download:** [gitea.it-drui.de/viewit/KX-Bridge-Release/releases](https://gitea.it-drui.de/viewit/KX-Bridge-Release/releases) → `fetch_credentials` / `extract_credentials` (Linux & Windows) im jeweiligen Release-Asset
 
 ### Schritt 3 – Bridge starten
 
@@ -36,7 +46,7 @@ Das Skript baut das Docker-Image automatisch beim ersten Aufruf.
 
 **Web-UI öffnen:** `http://BRIDGE-IP:7125`  
 → Das ⚙-Menü öffnet sich beim ersten Start automatisch  
-→ Credentials aus Schritt 2 eintragen → **Speichern & Neustart**
+→ Bei Option B: Credentials aus Schritt 2 eintragen → **Speichern & Neustart**
 
 **OrcaSlicer verbinden:**  
 Drucker → Verbindungstyp **Moonraker** → Host: `http://BRIDGE-IP:7125`
@@ -46,6 +56,12 @@ Drucker → Verbindungstyp **Moonraker** → Host: `http://BRIDGE-IP:7125`
 
 ---
 
+## 📺 Video Tutorial
+
+[![KX-Bridge Setup & Bedienung](https://img.youtube.com/vi/1Ql4wfH27fM/hqdefault.jpg)](https://www.youtube.com/watch?v=1Ql4wfH27fM)
+
+---
+
 ## ⚠️ Update von 0.9.1 oder älter
 
 Ab **0.9.2** speichert KX-Bridge Einstellungen in `config/config.ini` statt in `.env`.
@@ -110,7 +126,8 @@ docker-compose down
 ## Fehlerbehebung
 
 **„Falsche MQTT-Zugangsdaten"** beim Start:
-- AnycubicSlicerNext neu starten, Drucker verbinden, `extract_credentials` erneut ausführen
+- `fetch_credentials --ip <Drucker-IP> --write-config` erneut ausführen und Bridge neu starten
+- Wenn IP unbekannt: AnycubicSlicerNext neu starten, Drucker verbinden, `extract_credentials` erneut ausführen
 - Nur die IP-Adresse ins Feld eintragen, keinen Port (✗ `192.168.1.102:9883` → ✓ `192.168.1.102`)
 
 **Drucker nicht gefunden / kein LAN-Modus:**
@@ -135,3 +152,9 @@ sudo usermod -aG docker $USER  # dann neu einloggen
 ## Lizenz & Rechtliches
 
 Interoperabilitätsforschung gem. §69e UrhG — ausschließlich private, nicht-kommerzielle Nutzung.
+
+<p align="center">
+  <a href="https://ko-fi.com/viewitde">
+    <img src="https://ko-fi.com/img/githubbutton_sm.svg" alt="Ko-fi Support"/>
+  </a>
+</p>

README.md

@@ -2,7 +2,7 @@
 
 # KX-Bridge – Anycubic Kobra X
 
-**Version:** 0.9.6.1
+**Version:** 0.9.7
 
 Control your **Anycubic Kobra X** with OrcaSlicer — no Klipper, no Raspberry Pi.  
 KX-Bridge is a Moonraker-compatible bridge that communicates directly with the printer.
@@ -46,6 +46,12 @@ Printer → Connection type **Moonraker** → Host: `http://BRIDGE-IP:7125`
 
 ---
 
+## 📺 Video Tutorial
+
+[![KX-Bridge Setup & Usage](https://img.youtube.com/vi/1Ql4wfH27fM/hqdefault.jpg)](https://www.youtube.com/watch?v=1Ql4wfH27fM)
+
+---
+
 ## ⚠️ Upgrading from 0.9.1 or earlier
 
 Starting with **0.9.2**, KX-Bridge stores settings in `config/config.ini` instead of `.env`.
@@ -135,3 +141,9 @@ sudo usermod -aG docker $USER  # then log out and back in
 ## License
 
 Interoperability research under §69e UrhG — private, non-commercial use only.
+
+<p align="center">
+  <a href="https://ko-fi.com/viewitde">
+    <img src="https://ko-fi.com/img/githubbutton_sm.svg" alt="Ko-fi Support"/>
+  </a>
+</p>

VERSION

@@ -1 +1 @@
-0.9.6.1
+0.9.7

fetch_credentials.py

@@ -0,0 +1,397 @@
+#!/usr/bin/env python3
+"""
+fetch_credentials.py – Fetches and decrypts Anycubic Kobra X credentials via HTTP API.
+
+Original approach by bebu (PR #19, KX-Bridge-Release).
+Reverse engineered from the Vue project embedded in libWorkbench.so (Anycubic Slicer Next).
+No running slicer required — only the printer IP in LAN.
+
+Algorithm: AES-256-CBC
+  Key: token[16:32] from /info response
+  IV:  response token from /ctrl response
+
+Usage:
+    python3 fetch_credentials.py --ip 192.168.x.x
+    python3 fetch_credentials.py --ip 192.168.x.x --write-config
+    python3 fetch_credentials.py --ip 192.168.x.x --write-config --config-file ../config/config.ini
+    python3 fetch_credentials.py --ctrl ctrl.json --info info.json
+"""
+
+import json
+import sys
+import base64
+import hashlib
+import argparse
+import os
+import time
+import random
+import string
+import requests
+from pathlib import Path
+from Crypto.Cipher import AES
+from Crypto.Util.Padding import unpad
+
+
+def evp_bytes_to_key(password, salt, key_len, iv_len):
+    """
+    Derive key and IV from password and salt using OpenSSL EVP_BytesToKey
+    This mimics the CryptoJS default key derivation
+    """
+    m = []
+    i = 0
+    while len(b''.join(m)) < (key_len + iv_len):
+        md5 = hashlib.md5()
+        data = password + salt
+        if i > 0:
+            data = m[i - 1] + password + salt
+        md5.update(data)
+        m.append(md5.digest())
+        i += 1
+    ms = b''.join(m)
+    return ms[:key_len], ms[key_len:key_len + iv_len]
+
+
+def generate_signature(token, ts, nonce):
+    """
+    Generate MD5 signature for /ctrl endpoint
+    Signature = md5(md5(token[0:16]) + ts + nonce)
+    """
+    # First MD5: token.slice(0, 16)
+    first_md5 = hashlib.md5(token[:16].encode('utf-8')).hexdigest()
+    # Second MD5: first_md5 + ts + nonce
+    signature_data = first_md5 + str(ts) + nonce
+    signature = hashlib.md5(signature_data.encode('utf-8')).hexdigest()
+    return signature
+
+
+def generate_nonce(length=6):
+    """Generate a random alphanumeric nonce"""
+    chars = string.ascii_letters + string.digits
+    return ''.join(random.choice(chars) for _ in range(length))
+
+
+def fetch_from_http(ip, port, endpoint, token=None, did="random", verbose=False):
+    """
+    Fetch data from HTTP endpoint on the printer
+    
+    Args:
+        ip (str): IP address of the printer
+        port (int): Port number (default 18910)
+        endpoint (str): Either 'info' or 'ctrl'
+        token (str): Device token (required for /ctrl endpoint)
+        did (str): Device ID (required for /ctrl endpoint)
+        verbose (bool): Print debug information
+    
+    Returns:
+        dict: JSON response data
+    """
+    try:
+        if endpoint == 'info':
+            url = f"http://{ip}:{port}/info"
+            if verbose:
+                print(f"Fetching: {url}")
+            response = requests.get(url, timeout=10)
+            response.raise_for_status()
+            return response.json()
+        
+        elif endpoint == 'ctrl':
+            if not token:
+                raise ValueError("Token is required for /ctrl endpoint")
+            
+            # Generate signature parameters
+            ts = int(time.time() * 1000)  # Current timestamp in ms
+            nonce = generate_nonce(6)
+            signature = generate_signature(token, ts, nonce)
+            
+            url = f"http://{ip}:{port}/ctrl"
+            params = {
+                'ts': ts,
+                'nonce': nonce,
+                'sign': signature,
+                'did': did
+            }
+            
+            if verbose:
+                print(f"Fetching: {url}")
+                print(f"  Parameters:")
+                print(f"    ts: {ts}")
+                print(f"    nonce: {nonce}")
+                print(f"    sign: {signature}")
+                print(f"    did: {did}")
+            
+            response = requests.post(url, params=params, timeout=10)
+            response.raise_for_status()
+            return response.json()
+        
+        else:
+            raise ValueError(f"Unknown endpoint: {endpoint}")
+    
+    except requests.exceptions.RequestException as e:
+        raise Exception(f"HTTP request failed for {endpoint}: {e}")
+    except json.JSONDecodeError as e:
+        raise Exception(f"Invalid JSON response from {endpoint}: {e}")
+
+
+def decrypt_text(encrypted_data, key, iv):
+    """
+    Decrypt data using AES-256-CBC
+    Handles CryptoJS-style encrypted data (OpenSSL format with salt)
+    
+    Args:
+        encrypted_data (str): Encrypted data string (CryptoJS format)
+        key (str): Decryption key string
+        iv (str): Initialization vector string
+    
+    Returns:
+        dict: Decrypted JSON data
+    """
+    try:
+        # Convert key and IV to bytes
+        key_bytes = key.encode('utf-8')
+        iv_bytes = iv.encode('utf-8')
+        
+        # Decrypt using direct key and IV (as per the original code)
+        cipher = AES.new(key_bytes, AES.MODE_CBC, iv_bytes)
+        
+        # The encrypted_data might be base64 or hex encoded
+        # Try base64 first
+        try:
+            encrypted_bytes = base64.b64decode(encrypted_data)
+        except:
+            try:
+                # Try as hex
+                encrypted_bytes = bytes.fromhex(encrypted_data)
+            except:
+                # If all else fails, encode as UTF-8
+                encrypted_bytes = encrypted_data.encode('utf-8')
+        
+        # Decrypt
+        decrypted = cipher.decrypt(encrypted_bytes)
+        
+        # Try to unpad
+        try:
+            unpadded = unpad(decrypted, AES.block_size)
+        except ValueError:
+            # If unpadding fails, use as-is
+            unpadded = decrypted
+        
+        plaintext = unpadded.decode('utf-8')
+        
+        # Parse JSON
+        return json.loads(plaintext)
+    
+    except Exception as e:
+        return {"error": str(e), "error_type": type(e).__name__}
+
+
+def main():
+    """Main function to decrypt printer data"""
+    
+    # Parse command-line arguments
+    parser = argparse.ArgumentParser(
+        description='Fetch and decrypt Anycubic Kobra X credentials via HTTP API',
+    )
+    # HTTP mode
+    parser.add_argument('--ip', help='IP address of the printer')
+    parser.add_argument('--port', type=int, default=18910, help='Printer HTTP port (default: 18910)')
+
+    # File mode
+    parser.add_argument('--ctrl', default='ctrl.json', help='Path to ctrl.json (default: ctrl.json)')
+    parser.add_argument('--info', default='info.json', help='Path to info.json (default: info.json)')
+
+    # Output
+    parser.add_argument('--output', default=None, help='Save raw decrypted JSON to file (optional)')
+    parser.add_argument('--write-config', action='store_true',
+                        help='Write credentials to config.ini')
+    parser.add_argument('--config-file', default=None,
+                        help='Path to config.ini (default: ../config/config.ini relative to this script)')
+    parser.add_argument('--verbose', '-v', action='store_true', help='Verbose output')
+
+    args = parser.parse_args()
+    
+    # Determine mode: HTTP or file
+    if args.ip:
+        # HTTP mode: fetch from printer
+        if args.verbose:
+            print("=" * 70)
+            print("Fetching configuration from printer via HTTP")
+            print("=" * 70)
+            print(f"Printer IP: {args.ip}:{args.port}")
+            print()
+        
+        try:
+            # Fetch info.json
+            if args.verbose:
+                print("Step 1: Fetching device info...")
+            info = fetch_from_http(args.ip, args.port, 'info', verbose=args.verbose)
+            
+            # Get token from info
+            token = info.get('token')
+            if not token:
+                print("Error: No token found in /info response", file=sys.stderr)
+                return 1
+            
+            # Fetch data.json (encrypted config) from /ctrl endpoint
+            if args.verbose:
+                print("\nStep 2: Fetching encrypted configuration from /ctrl...")
+            data = fetch_from_http(args.ip, args.port, 'ctrl', token=token, verbose=args.verbose)
+            
+            if args.verbose:
+                print("\nData fetched successfully!")
+            
+        except Exception as e:
+            print(f"Error: {e}", file=sys.stderr)
+            return 1
+    
+    else:
+        # File mode: load from disk
+        if args.verbose:
+            print("=" * 70)
+            print("Loading configuration from files")
+            print("=" * 70)
+        
+        # Check if input files exist
+        if not Path(args.ctrl).exists():
+            print(f"Error: {args.ctrl} not found", file=sys.stderr)
+            return 1
+        if not Path(args.info).exists():
+            print(f"Error: {args.info} not found", file=sys.stderr)
+            return 1
+        
+        # Read ctrl.json
+        try:
+            with open(args.ctrl, 'r') as f:
+                data = json.load(f)
+        except json.JSONDecodeError as e:
+            print(f"Error reading {args.ctrl}: {e}", file=sys.stderr)
+            return 1
+        except Exception as e:
+            print(f"Error reading {args.ctrl}: {e}", file=sys.stderr)
+            return 1
+        
+        # Read info.json
+        try:
+            with open(args.info, 'r') as f:
+                info = json.load(f)
+        except json.JSONDecodeError as e:
+            print(f"Error reading {args.info}: {e}", file=sys.stderr)
+            return 1
+        except Exception as e:
+            print(f"Error reading {args.info}: {e}", file=sys.stderr)
+            return 1
+    
+    # Extract values
+    try:
+        encrypted_info = data['data']['info']
+        response_token = data['data']['token']
+        full_token = info['token']
+    except KeyError as e:
+        print(f"Error: Missing required key {e}", file=sys.stderr)
+        return 1
+    
+    # Generate decryption key and IV
+    key_part = full_token[16:32]
+    
+    if args.verbose:
+        print("=" * 70)
+        print("Printer Configuration Decryption")
+        print("=" * 70)
+        print(f"Input data file: {args.ctrl}")
+        print(f"Input info file: {args.info}")
+        print(f"Output file: {args.output}")
+        print()
+        print("Decryption Parameters:")
+        print(f"  Encrypted data length: {len(encrypted_info)} bytes")
+        print(f"  Full token: {full_token}")
+        print(f"  Full token length: {len(full_token)} characters")
+        print(f"  Response token (IV): {response_token}")
+        print(f"  Decryption key: {key_part}")
+        print(f"  Key length: {len(key_part)} characters")
+        print(f"  IV length: {len(response_token)} characters")
+        print()
+    
+    # Decrypt
+    if args.verbose:
+        print("Decrypting...")
+    
+    result = decrypt_text(encrypted_info, key_part, response_token)
+    
+    if 'error' in result:
+        print(f"Error during decryption: {result.get('error')}", file=sys.stderr)
+        return 1
+    
+    # Show result
+    print()
+    print("=" * 55)
+    print("  CREDENTIALS")
+    print("=" * 55)
+    print(f"  {'Printer IP':12s}  {result.get('ip', 'n/a')}")
+    print(f"  {'Username':12s}  {result.get('username', 'n/a')}")
+    print(f"  {'Password':12s}  {result.get('password', 'n/a')}")
+    print(f"  {'Device-ID':12s}  {result.get('deviceId', 'n/a')}")
+    print(f"  {'Mode-ID':12s}  {result.get('modeId', 'n/a')}")
+    print(f"  {'Model':12s}  {result.get('modelName', 'n/a')}")
+    print(f"  {'Broker':12s}  {result.get('broker', 'n/a')}")
+    print("=" * 55)
+
+    if args.verbose:
+        print()
+        print("Full decrypted config:")
+        # Strip certs/keys from verbose output to avoid cluttering terminal
+        display = {k: v for k, v in result.items() if k not in ('devicecrt', 'devicepk')}
+        print(json.dumps(display, indent=2))
+
+    # Optionally save raw JSON
+    if args.output:
+        try:
+            with open(args.output, 'w') as f:
+                json.dump(result, f, indent=2)
+            print(f"\nRaw config saved to: {args.output}")
+        except Exception as e:
+            print(f"Error writing to {args.output}: {e}", file=sys.stderr)
+            return 1
+
+    # Write config.ini
+    if args.write_config:
+        if args.config_file:
+            config_path = args.config_file
+        else:
+            config_path = os.path.join(os.path.dirname(os.path.abspath(__file__)),
+                                       '..', 'config', 'config.ini')
+            config_path = os.path.normpath(config_path)
+
+        _write_config_ini(result, config_path)
+    else:
+        print(f"\nTip: pass --write-config to write credentials directly to config.ini")
+
+    return 0
+
+
+def _write_config_ini(result: dict, config_path: str):
+    """Write fetched credentials into config.ini, preserving existing non-credential keys."""
+    import configparser
+
+    cfg = configparser.ConfigParser()
+
+    if os.path.isfile(config_path):
+        cfg.read(config_path)
+
+    if not cfg.has_section('connection'):
+        cfg.add_section('connection')
+
+    cfg.set('connection', 'printer_ip', result.get('ip', ''))
+    cfg.set('connection', 'mqtt_port',  '9883')
+    cfg.set('connection', 'username',   result.get('username', ''))
+    cfg.set('connection', 'password',   result.get('password', ''))
+    cfg.set('connection', 'device_id',  result.get('deviceId', ''))
+    cfg.set('connection', 'mode_id',    result.get('modeId', '20030'))
+
+    os.makedirs(os.path.dirname(config_path), exist_ok=True)
+    with open(config_path, 'w') as f:
+        cfg.write(f)
+
+    print(f"\n✓ Credentials written to '{config_path}'.")
+
+
+if __name__ == '__main__':
+    sys.exit(main())

kobrax_client.py

@@ -523,7 +523,7 @@ class KobraXClient:
 
         sock = socket.create_connection((self.host, 18910), timeout=30)
         sock.sendall(headers + body)
-        sock.settimeout(10)
+        sock.settimeout(120)  # große GCode-Dateien brauchen Zeit bis der Drucker antwortet
         response = b""
         try:
             while True:

kobrax_moonraker_bridge.py

@@ -178,6 +178,7 @@ class KobraXBridge:
         client.callbacks["info/report"]           = self._on_info
         client.callbacks["file/report"]           = self._on_file
         client.callbacks["multiColorBox/report"]  = self._on_multicolor_box
+        client.callbacks["light/report"]          = self._on_light
 
     # -------------------------------------------------------------------------
     # MQTT callbacks (called from reader thread)
@@ -289,6 +290,12 @@ class KobraXBridge:
             log.info(f"AMS-Slots empfangen: {len(slots)}, loaded_slot={self._ams_loaded_slot}")
             self._push_status_update()
 
+    def _on_light(self, payload: dict):
+        d = payload.get("data") or {}
+        self._state["light_on"]         = bool(d.get("status", 0))
+        self._state["light_brightness"] = int(d.get("brightness", 80))
+        self._push_status_update()
+
     # OrcaSlicer filament preset IDs (MoonrakerPrinterAgent.cpp mapping)
     _TRAY_INFO_IDX = {
         "PLA":      "OGFL99", "PLA-CF":   "OGFL98", "PLA SILK": "OGFL96",
@@ -3077,7 +3084,7 @@ def _mqtt_error_msg(exc: Exception) -> str:
 
 
 def build_app(bridge: KobraXBridge) -> web.Application:
-    app = web.Application()
+    app = web.Application(client_max_size=256 * 1024 * 1024)  # 256 MB für große GCode-Dateien
     r = app.router
 
     # Moonraker API

requirements.txt

@@ -1,2 +1,4 @@
 aiohttp>=3.9
 imageio-ffmpeg>=0.4.9
+requests>=2.30.0
+pycryptodome>=3.20.0