build: sources for v0.9.16

CHANGELOG.de.md

@@ -1,5 +1,51 @@
 # Changelog
 
+## [0.9.16] – 2026-05-22
+
+### Neu
+- **Kamera bei Druckstart automatisch einschalten:** neue Einstellung „Kamera bei
+  Druckstart einschalten" — die Bridge startet den Kamera-Stream automatisch, wenn
+  ein Druck beginnt (für OrcaSlicer und die Bridge-UI).
+
+### Fixes
+- **Einfarbiger Druck durch leeren AMS-Slot blockiert:** OrcaSlicer schreibt alle
+  konfigurierten Filamente in den GCode-Header, auch wenn das Modell nur eines
+  nutzt — die Bridge meldete dem Drucker dadurch alle Farben als nötig, und ein
+  leerer ungenutzter Slot brach den Druck ab. Die Bridge mappt jetzt nur die im
+  GCode tatsächlich genutzten Filamente.
+- **Filament-Sync jetzt positionstreu:** Bei einem leeren Slot in der Mitte
+  (z.B. Slot 1 gelb, 2 leer, 3 rot, 4 weiß) zeigte OrcaSlicer die Farben auf den
+  falschen Slots. Behoben — leere Slots behalten ihre Position, und das
+  Sync-Farbformat folgt der Happy-Hare-Konvention (RRGGBB ohne `#`).
+- **Slicer-Zeit + Thumbnail fehlten nach Browser-Reload** (oder bei Druckstart
+  direkt aus OrcaSlicer): beide werden jetzt aus dem GCode-Store anhand des
+  Dateinamens wiederhergestellt statt aus flüchtigem State.
+- **Deutsche Übersetzungslücken** im ACE-Trockner-Dialog behoben.
+
+### Logging
+- Wiederholte Log-Zeilen werden als Zähler („×N") zusammengefasst statt zu spammen;
+  Status-Poll-Verkehr wird nicht mehr auf INFO geloggt.
+- Neuer Level-Filter (Alle / Fehler / Warnungen), Toast bei neuen Fehlern, volle
+  Tracebacks im Browser-Log und ein Download-Dateiname mit Zeitstempel.
+
+## [0.9.15] – 2026-05-21
+
+### Fixes (Issue #29)
+- **UI im OrcaSlicer-Device-Tab kaputt:** OrcaSlicers eingebetteter Webview lädt
+  nur das nackte HTML und ignoriert externe `<script>`/`<link>`-Tags — nach der
+  v0.9.14-Theme-Auslagerung funktionierte dort kein Button mehr. Die Bridge
+  bettet CSS + JS jetzt inline in die Seite ein — funktioniert in Browser UND
+  OrcaSlicer-Webview.
+- **Dropdowns unlesbar (weiß auf weiß) im OrcaSlicer-Webview:** `color-scheme` +
+  explizite `select`/`option`-Farben ergänzt, damit die nativen Dropdowns in
+  Hell- und Dunkel-Theme korrekt dargestellt werden.
+- **„Select slots"-Button tat direkt nach Upload nichts:** eine fehlende
+  Variablen-Deklaration (`storeFiles`) warf einen `ReferenceError`, wenn vor dem
+  Laden des Browser-Tabs geklickt wurde. Behoben.
+- **Upload-Banner kam nach abgeschlossenem Druck zurück:** der „file ready"-Status
+  wurde nur bei Stop/Abbruch geleert, nicht bei `finished`. Jetzt auch nach
+  erfolgreichem Druckende geleert.
+
 ## [0.9.14] – 2026-05-21
 
 ### Neu

CHANGELOG.md

@@ -1,5 +1,50 @@
 # Changelog
 
+## [0.9.16] – 2026-05-22
+
+### New
+- **Auto-start camera on print:** new setting "Turn camera on at print start" —
+  when enabled, the bridge starts the camera stream automatically when a print
+  begins (works for both OrcaSlicer and the Bridge UI).
+
+### Fixes
+- **Single-color print blocked by an empty AMS slot:** OrcaSlicer writes all
+  configured filaments into the GCode header even when the model uses only one,
+  so the bridge told the printer it needed every color — and an empty unused slot
+  aborted the print. The bridge now maps only the filaments actually used by the
+  GCode.
+- **Filament sync now position-accurate:** with an empty slot in the middle
+  (e.g. slot 1 yellow, 2 empty, 3 red, 4 white) OrcaSlicer showed the colors
+  shifted onto the wrong slots. Fixed — empty slots keep their position, and the
+  sync color format follows the Happy Hare convention (RRGGBB without `#`).
+- **Slicer time + thumbnail missing after a browser reload** (or when a print was
+  started directly from OrcaSlicer): both are now restored from the GCode store
+  by filename instead of relying on volatile state.
+- **German translation gaps** in the ACE dryer dialog fixed.
+
+### Logging
+- Repeated log lines are collapsed into a counter ("×N") instead of spamming the
+  console; status-poll traffic is no longer logged at INFO.
+- New log level filter (All / Errors / Warnings), a toast on new errors, full
+  tracebacks forwarded to the browser log, and a timestamped download filename.
+
+## [0.9.15] – 2026-05-21
+
+### Fixes (Issue #29)
+- **UI in the OrcaSlicer device tab was broken:** OrcaSlicer's embedded webview
+  only loads the bare HTML and ignores external `<script>`/`<link>` tags, so after
+  the v0.9.14 theme split none of the buttons worked in the device tab. The
+  bridge now inlines CSS + JS into the page — works in both the browser and the
+  OrcaSlicer webview.
+- **Dropdowns unreadable (white-on-white) in the OrcaSlicer webview:** added
+  `color-scheme` + explicit `select`/`option` colors so the native dropdowns
+  render correctly in dark and light theme.
+- **"Select slots" button did nothing right after an upload:** a missing variable
+  declaration (`storeFiles`) threw a `ReferenceError` when clicked before the
+  Browser tab had loaded. Fixed.
+- **Upload banner came back after a finished print:** the "file ready" state was
+  only cleared on stop/cancel, not on `finished`. Now cleared on completion too.
+
 ## [0.9.14] – 2026-05-21
 
 ### New

VERSION

@@ -1 +1 @@
-0.9.14
+0.9.16

config_loader.py

@@ -59,6 +59,7 @@ def _load_config_file(path: pathlib.Path):
         "DEVICE_ID":        (CONFIG_SECTION_CONNECTION, "device_id"),
         "DEFAULT_AMS_SLOT":     (CONFIG_SECTION_PRINT,   "default_ams_slot"),
         "AUTO_LEVELING":        (CONFIG_SECTION_PRINT,   "auto_leveling"),
+        "CAMERA_ON_PRINT":      (CONFIG_SECTION_PRINT,   "camera_on_print"),
         "BRIDGE_PRINTER_NAME":  (CONFIG_SECTION_BRIDGE,  "printer_name"),
     }
     for env_key, (section, option) in mapping.items():
@@ -95,6 +96,7 @@ def migrate_env_to_config(env_path: pathlib.Path, config_path: pathlib.Path):
     cfg[CONFIG_SECTION_PRINT] = {
         "default_ams_slot": env_vals.get("DEFAULT_AMS_SLOT", "auto"),
         "auto_leveling":    env_vals.get("AUTO_LEVELING",    "1"),
+        "camera_on_print":  env_vals.get("CAMERA_ON_PRINT",  "0"),
     }
     cfg[CONFIG_SECTION_BRIDGE] = {
         "poll_interval": "3",
@@ -175,3 +177,4 @@ MODE_ID          = get("MODE_ID",          "")
 DEVICE_ID        = get("DEVICE_ID",        "")
 DEFAULT_AMS_SLOT = get("DEFAULT_AMS_SLOT", "auto")
 AUTO_LEVELING    = int(get("AUTO_LEVELING","1"))
+CAMERA_ON_PRINT  = int(get("CAMERA_ON_PRINT","0"))

kobrax_client.py

@@ -371,9 +371,12 @@ class KobraXClient:
             report_registered = True
 
         topic = self._pub_topic(msg_type)
-        log.info("TX %-25s  action=%-12s  data=%s",
+        # Status-Poll-TX (query/getInfo) ist reines Rauschen (alle paar Sekunden) →
-                 f"{msg_type}/request", action,
+        # auf DEBUG. Aktions-TX (start/set/control/move/…) bleibt INFO sichtbar.
-                 json.dumps(data, ensure_ascii=False) if data else "null")
+        _tx_level = logging.DEBUG if action in ("query", "getInfo") else logging.INFO
+        log.log(_tx_level, "TX %-25s  action=%-12s  data=%s",
+                f"{msg_type}/request", action,
+                json.dumps(data, ensure_ascii=False) if data else "null")
         try:
             with self._lock:
                 self._sock.sendall(_build_publish(topic, payload))

kobrax_moonraker_bridge.py

@@ -151,11 +151,19 @@ class _BrowserLogHandler(logging.Handler):
     _fmt = logging.Formatter(datefmt="%H:%M:%S")
 
     def emit(self, record: logging.LogRecord):
+        msg = record.getMessage()
+        # Exceptions mit Traceback in den Browser durchreichen (sonst sieht der
+        # Nutzer nur "Fehler: X" ohne Kontext).
+        if record.exc_info:
+            try:
+                msg += "\n" + self._fmt.formatException(record.exc_info)
+            except Exception:
+                pass
         entry = {
             "ts":    self._fmt.formatTime(record, "%H:%M:%S"),
             "lvl":   record.levelname,
             "name":  record.name,
-            "msg":   record.getMessage(),
+            "msg":   msg,
         }
         _log_buffer.append(entry)
         for q in list(_log_sse_queues):
@@ -554,6 +562,7 @@ class KobraXBridge:
         self._store = store if store is not None else GCodeStore(args.data_dir)
         self._serve_dir_path: str = self._store._gcode_dir
         self._current_job_id: str = ""
+        self._camera_autostarted: bool = False
 
         self._thumbnail_b64: str = ""
         self._ace_dry_presets: dict[str, dict] = self._load_ace_dry_presets_config()
@@ -665,6 +674,20 @@ class KobraXBridge:
         if kobra_state:
             self._state["kobra_state"] = kobra_state
 
+        # Kamera bei Druckstart automatisch einschalten (Settings-Option).
+        # Zentral hier, damit es alle Druck-Startwege abdeckt (OrcaSlicer + UI).
+        # _camera_autostarted verhindert Mehrfach-Trigger pro Druck.
+        if kobra_state == "printing":
+            if getattr(self._args, "camera_on_print", 0) and not getattr(self, "_camera_autostarted", False):
+                self._camera_autostarted = True
+                try:
+                    self.client.start_camera()
+                    log.info("Kamera bei Druckstart automatisch eingeschaltet")
+                except Exception as e:
+                    log.warning(f"Kamera-Autostart fehlgeschlagen: {e}")
+        elif kobra_state in ("free", "finished", "stoped", "canceled"):
+            self._camera_autostarted = False
+
         # Job-History: Druckstart erkennen
         if kobra_state == "printing" and not self._current_job_id:
             filename = d.get("filename", self._state.get("filename", ""))
@@ -687,6 +710,11 @@ class KobraXBridge:
             log.info(f"Job abgebrochen: {self._current_job_id}")
             self._current_job_id = ""
 
+        # Nach Druckende das Upload-Banner verschwinden lassen (Issue #29): der
+        # Drucker meldet "finished" nach erfolgreichem Druck — file_ready wurde
+        # bisher nur bei stoped/canceled geleert, dadurch kam das Banner zurück.
+        if kobra_state == "finished":
+            self._state["file_ready"] = ""
         if kobra_state in ("stoped", "canceled"):
             self._state["progress"] = 0.0
             self._state["filename"] = ""
@@ -728,6 +756,22 @@ class KobraXBridge:
         if kobra_state:
             self._state["print_state"] = KOBRA_TO_KLIPPER_STATE.get(kobra_state, "standby")
             self._state["kobra_state"] = kobra_state
+            # Upload-Banner nach Druckende ausblenden (Issue #29) – der State kommt
+            # je nach Drucker auch über info/report (project.state), nicht nur print/report.
+            if kobra_state in ("finished", "stoped", "canceled"):
+                self._state["file_ready"] = ""
+            # Kamera-Autostart auch hier (OrcaSlicer meldet Start oft via info/report).
+            # _camera_autostarted-Guard verhindert Doppel-Start mit _on_print.
+            if kobra_state == "printing":
+                if getattr(self._args, "camera_on_print", 0) and not getattr(self, "_camera_autostarted", False):
+                    self._camera_autostarted = True
+                    try:
+                        self.client.start_camera()
+                        log.info("Kamera bei Druckstart automatisch eingeschaltet")
+                    except Exception as e:
+                        log.warning(f"Kamera-Autostart fehlgeschlagen: {e}")
+            elif kobra_state in ("free", "finished", "stoped", "canceled"):
+                self._camera_autostarted = False
         if project:
             if "filename" in project:
                 self._state["filename"] = project["filename"]
@@ -1220,49 +1264,61 @@ class KobraXBridge:
     }
 
     def _build_lane_data(self) -> dict:
-      """Build lane_data for filament sync from loaded, printable slots only.
+      """Baut BBL-AMS-JSON für OrcaSlicer DevFilaSystemParser::ParseV1_0.
 
-      Slots are compacted in sync order (installed slots first) so Orca/Happy
+      POSITIONSTREU: jeder physische Slot behält seine Position (tray id =
-      Hare does not infer empty gaps between tray ids.
+      Slot-Position). Leere Slots werden als Platzhalter-Tray gemeldet, NICHT
+      weggefiltert/komprimiert — sonst rutschen die Farben auf falsche Positionen
+      (z.B. Slot 1=gelb, 2=leer, 3=rot → rot dürfte nicht auf Position 2 landen).
       """
-      loaded_slots = self._loaded_slots_for_print()
+      slots = self._ams_slots
-      if not loaded_slots:
+      total = len(slots)
+      if total == 0:
         return {"ams": [], "ams_exist_bits": "0", "tray_exist_bits": "0"}
 
-      ams_buckets: dict[int, list[tuple[int, dict]]] = {}
+      ams_count = (total + 3) // 4
-      tray_exist_bits = 0
-
-      for sync_index, (_global_index, slot) in enumerate(sorted(loaded_slots, key=lambda item: item[0])):
-        ams_id = sync_index // 4
-        slot_id = sync_index % 4
-        tray_exist_bits |= (1 << sync_index)
-        ams_buckets.setdefault(ams_id, []).append((slot_id, slot))
-
       ams_exist_bits = 0
+      tray_exist_bits = 0
       ams_array = []
-      for ams_id in sorted(ams_buckets.keys()):
+
+      for ams_id in range(ams_count):
         ams_exist_bits |= (1 << ams_id)
         tray_array = []
-        for slot_id, slot in sorted(ams_buckets[ams_id], key=lambda item: item[0]):
+        max_slot = min(3, total - ams_id * 4 - 1)
-          color_raw = slot.get("color", [255, 255, 255])
+        for slot_id in range(max_slot + 1):
-          if isinstance(color_raw, list) and len(color_raw) >= 3:
+          slot_index = ams_id * 4 + slot_id
-            color_hex = "{:02X}{:02X}{:02X}FF".format(
+          slot = slots[slot_index] if slot_index < total else {}
-              int(color_raw[0]), int(color_raw[1]), int(color_raw[2])
+          occupied = slot.get("status") == 5
-            )
-          elif isinstance(color_raw, str) and len(color_raw) >= 6:
-            color_hex = color_raw[:6].upper() + "FF"
-          else:
-            color_hex = "FFFFFFFF"
 
-          material = slot.get("type", "PLA").upper()
+          if occupied:
-          tray_info_idx = self._TRAY_INFO_IDX.get(material, "OGFL99")
+            tray_exist_bits |= (1 << slot_index)
-          tray_array.append({
+            color_raw = slot.get("color", [255, 255, 255])
-            "id": str(slot_id),
+            if isinstance(color_raw, list) and len(color_raw) >= 3:
-            "tag_uid": "0000000000000000",
+              color_hex = "{:02X}{:02X}{:02X}FF".format(
-            "tray_info_idx": tray_info_idx,
+                int(color_raw[0]), int(color_raw[1]), int(color_raw[2])
-            "tray_type": material,
+              )
-            "tray_color": color_hex,
+            elif isinstance(color_raw, str) and len(color_raw) >= 6:
-          })
+              color_hex = color_raw[:6].upper() + "FF"
+            else:
+              color_hex = "FFFFFFFF"
+            material = slot.get("type", "PLA").upper()
+            tray_info_idx = self._TRAY_INFO_IDX.get(material, "OGFL99")
+            tray_array.append({
+              "id": str(slot_id),
+              "tag_uid": "0000000000000000",
+              "tray_info_idx": tray_info_idx,
+              "tray_type": material,
+              "tray_color": color_hex,
+            })
+          else:
+            tray_array.append({
+              "id": str(slot_id),
+              "tag_uid": "0000000000000000",
+              "tray_info_idx": "",
+              "tray_type": "",
+              "tray_color": "00000000",
+              "tray_slot_placeholder": "1",
+            })
 
         ams_array.append({"id": str(ams_id), "info": "0002", "tray": tray_array})
 
@@ -1294,24 +1350,34 @@ class KobraXBridge:
         self.ws_clients -= dead
 
     def _build_mmu_object(self) -> dict:
-      loaded_slots = sorted(self._loaded_slots_for_print(), key=lambda item: item[0])
+      # POSITIONSTREU: ein Gate je physischem Slot, in Reihenfolge. Leere Slots
-      if not loaded_slots:
+      # bekommen gate_status=0 (statt weggelassen zu werden) – sonst rutschen die
+      # Farben in OrcaSlicer auf falsche Gates (Slot 1=gelb, 2=leer, 3=rot →
+      # rot darf nicht auf Gate 1 landen). gate_status 0=leer, 1=verfügbar.
+      slots = sorted(
+        ((int(s.get("global_index", i)), s) for i, s in enumerate(self._ams_slots)),
+        key=lambda item: item[0],
+      )
+      if not slots:
         return {}
 
       _TEMP = {"PLA": 210, "PETG": 230, "ABS": 240, "ASA": 250,
            "TPU": 220, "PA": 260, "PC": 270, "HIPS": 220}
-      num_gates = len(loaded_slots)
+      num_gates = len(slots)
       gate_status, gate_material, gate_color, gate_temperature, gate_color_rgb = [], [], [], [], []
-      for _global_index, slot in loaded_slots:
+      for _global_index, slot in slots:
-        gate_status.append(1)
+        occupied = slot.get("status") == 5
-        material = slot.get("type", "PLA").upper()
+        gate_status.append(1 if occupied else 0)
+        material = (slot.get("type") or "PLA").upper() if occupied else ""
         gate_material.append(material)
-        c = slot.get("color", [0, 0, 0])
+        c = slot.get("color", [0, 0, 0]) if occupied else [0, 0, 0]
-        gate_color.append("#{:02X}{:02X}{:02X}".format(*c[:3]))
+        # Happy Hare erwartet gate_color als RRGGBB OHNE '#' (Klipper-Limitation).
-        gate_color_rgb.append([round(c[0]/255, 3), round(c[1]/255, 3), round(c[2]/255, 3)])
+        # Leerer Gate: leerer String + RGB [0,0,0].
-        gate_temperature.append(_TEMP.get(material, 210))
+        gate_color.append("{:02X}{:02X}{:02X}".format(*c[:3]) if occupied else "")
+        gate_color_rgb.append([round(c[0]/255, 3), round(c[1]/255, 3), round(c[2]/255, 3)] if occupied else [0.0, 0.0, 0.0])
+        gate_temperature.append(_TEMP.get(material, 210) if occupied else 0)
 
-      loaded_index_map = {global_index: idx for idx, (global_index, _) in enumerate(loaded_slots)}
+      loaded_index_map = {global_index: idx for idx, (global_index, _) in enumerate(slots)}
       active_gate = loaded_index_map.get(int(self._ams_loaded_slot), -1)
       return {
         "num_gates":          num_gates,
@@ -1824,7 +1890,7 @@ class KobraXBridge:
             log.info(f"Upload+Print (print=true): {remote_filename}")
             self._state["file_ready"] = ""
             loop = asyncio.get_event_loop()
-            loop.run_in_executor(None, lambda: self._start_print(remote_filename, serve_url, file_md5, file_size))
+            loop.run_in_executor(None, lambda: self._start_print(remote_filename, serve_url, file_md5, file_size, gcode_filaments=gcode_filaments))
         else:
             log.info(f"Nur hochgeladen (print=false): {remote_filename}")
             self._state["file_ready"] = remote_filename
@@ -1849,12 +1915,32 @@ class KobraXBridge:
             }
         }, status=201)
 
-    def _start_print(self, filename: str, url: str = "", md5: str = "", filesize: int = 0):
+    def _start_print(self, filename: str, url: str = "", md5: str = "", filesize: int = 0,
+                     gcode_filaments: list | None = None):
         self._state["file_ready"] = ""
         loaded = self._select_loaded_slots_for_print(warn_on_empty_default=True)
+
+        # Nur die im GCode TATSÄCHLICH genutzten Paints auf Slots mappen. OrcaSlicer
+        # schreibt im Header alle konfigurierten Filamente (filament_colour=…;…;…;…),
+        # nutzt aber oft nur eines (z.B. einfarbig → nur T3). Würden wir alle
+        # belegten Slots mappen, erwartet der Drucker alle Farben und blockiert,
+        # wenn ein anderer (ungenutzter) Slot leer ist. Die genutzten Paint-Indizes
+        # liefert _extract_filament_info via is_used (echte T<n>-Tool-Changes).
+        used_paint_indices = None
+        if gcode_filaments:
+            used = [int(f["slot_index"]) for f in gcode_filaments
+                    if f.get("is_used") and "slot_index" in f]
+            if used:
+                used_paint_indices = set(used)
+
+        if used_paint_indices is not None:
+            # GCode-Paint-Index N entspricht AMS-Slot N (global_index). Nur belegte
+            # genutzte Slots mappen; nicht-belegte genutzte → später Warnung möglich.
+            loaded = [(gidx, s) for (gidx, s) in loaded if gidx in used_paint_indices]
+
         use_ams = len(loaded) > 0
         ams_box_mapping = self._build_auto_ams_box_mapping(loaded_slots=loaded)
-        log.debug(f"AMS-Slots: {len(loaded)}/{len(self._ams_slots)} belegt → {[i for i, _ in loaded]}")
+        log.debug(f"AMS-Slots: {len(loaded)} gemappt (genutzte Paints: {used_paint_indices}) → {[i for i, _ in loaded]}")
         auto_leveling = getattr(self._args, "auto_leveling", 1)
         payload = {
             "taskid":       "-1",
@@ -2049,9 +2135,30 @@ class KobraXBridge:
                 status=500,
                 content_type="text/html; charset=utf-8",
             )
-        html = tpl.replace("__UI_ASSETS_VER__", self._ui_asset_cache_buster())
+        page = tpl.replace("__UI_ASSETS_VER__", self._ui_asset_cache_buster())
-        
+
-        return web.Response(text=html, content_type="text/html",
+        # CSS + JS INLINE einbetten statt nur zu verlinken. OrcaSlicers
+        # eingebetteter Device-Tab-Webview lädt externe <link>/<script src>
+        # NICHT (nur das nackte HTML) → ohne Inlining funktioniert dort kein
+        # einziger Button (Issue #29). Im normalen Browser ist es ebenso korrekt.
+        base = os.path.join(_WEB_BASE, "web", "themes", self._ui_theme)
+        try:
+            css = pathlib.Path(os.path.join(base, "style.css")).read_text(encoding="utf-8")
+            page = page.replace(
+                '<link rel="stylesheet" href="/kx/ui/style.css">',
+                "<style>\n" + css + "\n</style>")
+        except OSError:
+            pass
+        try:
+            js = pathlib.Path(os.path.join(base, "app.js")).read_text(encoding="utf-8")
+            js = js.replace("'__VERSION__'", f"'{self._read_version()}'")
+            page = page.replace(
+                '<script src="/kx/ui/app.js"></script>',
+                "<script>\n" + js + "\n</script>")
+        except OSError:
+            pass
+
+        return web.Response(text=page, content_type="text/html",
                             headers={"Cache-Control": "no-store, no-cache, must-revalidate"})
 
     async def handle_api_light(self, request):
@@ -2508,6 +2615,23 @@ class KobraXBridge:
 
     async def handle_api_state(self, request):
         s = self._state
+        # Slicer-Zeit + Thumbnail sind nur flüchtig im State (werden beim Upload
+        # gesetzt). Nach Browser-Reload oder bei OrcaSlicer-Direktdruck (Datei kam
+        # nicht über den UI-Upload) fehlen sie → aus dem GCode-Store anhand des
+        # laufenden Dateinamens nachladen.
+        slicer_time = s["slicer_time"]
+        thumbnail = self._thumbnail_b64
+        fname = s.get("filename", "")
+        if fname and (not slicer_time or not thumbnail):
+            try:
+                gf = self._store.get_file_by_name(fname)
+                if gf:
+                    if not slicer_time and gf.get("est_print_time_sec"):
+                        slicer_time = int(gf["est_print_time_sec"])
+                    if not thumbnail and gf.get("thumbnail_b64"):
+                        thumbnail = gf["thumbnail_b64"]
+            except Exception:
+                pass
         return web.json_response({
             "printer_name":     s["printer_name"],
             "firmware_version": s["firmware_version"],
@@ -2523,7 +2647,7 @@ class KobraXBridge:
             "curr_layer":       s["curr_layer"],
             "total_layers":     s["total_layers"],
             "filename":         s["filename"],
-            "slicer_time":      s["slicer_time"],
+            "slicer_time":      slicer_time,
             "camera_url":       s["camera_url"],
             "fan_speed":        s["fan_speed"],
             "print_speed_mode": s["print_speed_mode"],
@@ -2536,7 +2660,7 @@ class KobraXBridge:
             "ace_units":        list(self._ace_box_ids),
             "ace_auto_feed":    dict(self._ace_auto_feed),
             "ace_dry_presets":  self._ace_dry_presets,
-            "thumbnail":        self._thumbnail_b64,
+            "thumbnail":        thumbnail,
             "connection_error": s["connection_error"],
             "file_ready":       s["file_ready"],
             "version":          self._read_version(),
@@ -2618,6 +2742,7 @@ class KobraXBridge:
             "device_id":        self._args.device_id,
             "default_ams_slot": getattr(self._args, "default_ams_slot", "auto"),
             "auto_leveling":    getattr(self._args, "auto_leveling", 1),
+            "camera_on_print":  getattr(self._args, "camera_on_print", 0),
         "ace_dry_presets":  self._ace_dry_presets,
         })
 
@@ -2646,6 +2771,7 @@ class KobraXBridge:
         cfg.set("connection", "device_id",  str(data.get("device_id",  self._args.device_id or "")))
         cfg.set("print",      "default_ams_slot", str(data.get("default_ams_slot", getattr(self._args, "default_ams_slot", "auto"))))
         cfg.set("print",      "auto_leveling",    str(data.get("auto_leveling",    getattr(self._args, "auto_leveling",    1))))
+        cfg.set("print",      "camera_on_print",  str(int(bool(data.get("camera_on_print", getattr(self._args, "camera_on_print", 0))))))
         if not cfg.has_option("bridge", "poll_interval"):
             cfg.set("bridge", "poll_interval", "3")
         printer_name = str(data.get("printer_name", "")).strip()
@@ -2910,12 +3036,15 @@ class KobraXBridge:
 
     async def handle_api_log_download(self, request):
         """Gibt alle gepufferten Log-Einträge als Plaintext zum Download."""
-        lines = [f"[{e['ts']}] {e['lvl']:<5} {e['name']}: {e['msg']}" for e in _log_buffer]
+        header = (f"# KX-Bridge Log  |  Version {self._read_version()}  |  "
-        text = "\n".join(lines)
+                  f"{time.strftime('%Y-%m-%d %H:%M:%S')}  |  {len(_log_buffer)} Einträge\n")
+        lines = [f"[{e['ts']}] {e['lvl']:<7} {e['name']}: {e['msg']}" for e in _log_buffer]
+        text = header + "\n".join(lines) + "\n"
+        fname = f"kx-bridge-log_{time.strftime('%Y%m%d-%H%M%S')}.txt"
         return web.Response(
             body=text.encode("utf-8"),
             content_type="text/plain",
-            headers={"Content-Disposition": 'attachment; filename="kx-bridge.log"'},
+            headers={"Content-Disposition": f'attachment; filename="{fname}"'},
         )
 
     async def handle_api_update_check(self, request):
@@ -3487,6 +3616,7 @@ def main():
     parser.add_argument("--device-id",       default=env_loader.DEVICE_ID)
     parser.add_argument("--default-ams-slot",default=env_loader.DEFAULT_AMS_SLOT)
     parser.add_argument("--auto-leveling",   type=int, default=env_loader.AUTO_LEVELING)
+    parser.add_argument("--camera-on-print", type=int, default=env_loader.CAMERA_ON_PRINT)
 
     parser.add_argument("--host",            default="0.0.0.0",
                         help="Bind-Adresse für den Bridge-Server")

web/DOC/THEME-JS-ID-HOOKS.md

@@ -54,6 +54,10 @@ Referenzliste für JavaScript-/DOM-Hooks.
 | `#logdir-all` | Hook / Selektor |
 | `#logdir-rx` | Hook / Selektor |
 | `#logdir-tx` | Hook / Selektor |
+| `#log-lbl-level` | i18n-Label "Level:" |
+| `#loglvl-all` | onclick `setLogLevel('all')` |
+| `#loglvl-err` | onclick `setLogLevel('err')` — nur Fehler |
+| `#loglvl-warn` | onclick `setLogLevel('warn')` — Fehler + Warnungen |
 | `#nb-console` | Hook / Selektor |
 | `#nb-dashboard` | Hook / Selektor |
 | `#nb-printers` | Hook / Selektor |

web/themes/default/app.js

@@ -96,7 +96,7 @@ var LANG_DE={
   card_progress:'Fortschritt',card_temps:'Temperaturen',card_light_fan:'Lüfter',card_speed:'Druckgeschwindigkeit',card_cam:'Kamera',lbl_elapsed:'Verstrichen:',lbl_remaining:'Restzeit:',lbl_slicer_time:'Slicer-Schätzung:',lbl_layers:'Layer',
   speed_silent:'🐢 Leise',speed_normal:'⚡ Normal',speed_sport:'🚀 Sport',
   lbl_light:'💡 Licht',lbl_feed:'Einziehen',lbl_unload:'Ausziehen',
-  card_ace_dry:'ACE Trocknung',ace_dry_dryer:'Trockner',ace_dry_status_off:'Status: Aus',ace_dry_status_on:'Status: Aktiv',ace_dry_status_remaining:'Rest',ace_dry_humidity:'Luftfeuchte',ace_dry_current_temp:'Temperatur',ace_dry_chart:'Verlauf (Temp/Feuchte)',ace_dry_temp:'Temperatur (°C)',ace_dry_duration:'Dauer (Min)',ace_dry_start:'▶ Start',ace_dry_stop:'■ Stop',ace_dry_auto_refill:'Auto Refill',ace_dry_enable:'Enable Drying',ace_dry_temp_line:'Trocknungstemperatur',ace_dry_time_line:'Trocknungszeit',ace_dry_ui_pending:'(nur UI, Backend folgt)',ace_dry_dialog_title:'Dryer Temp/Time Settings',ace_dry_dialog_temp:'Temperature (30-80°C)',ace_dry_dialog_time:'Rem. Time (h:m:s)',ace_dry_dialog_confirm:'Confirm',ace_dry_dialog_cancel:'Cancel',ace_dry_dialog_save_restart:'Speichern & Neustart',ace_dry_dialog_custom_name:'Custom Name',
+  card_ace_dry:'ACE Trocknung',ace_dry_dryer:'Trockner',ace_dry_status_off:'Status: Aus',ace_dry_status_on:'Status: Aktiv',ace_dry_status_remaining:'Rest',ace_dry_humidity:'Luftfeuchte',ace_dry_current_temp:'Temperatur',ace_dry_chart:'Verlauf (Temp/Feuchte)',ace_dry_temp:'Temperatur (°C)',ace_dry_duration:'Dauer (Min)',ace_dry_start:'▶ Start',ace_dry_stop:'■ Stop',ace_dry_auto_refill:'Auto-Nachschub',ace_dry_enable:'Trocknung aktivieren',ace_dry_temp_line:'Trocknungstemperatur',ace_dry_time_line:'Trocknungszeit',ace_dry_ui_pending:'(nur UI, Backend folgt)',ace_dry_dialog_title:'Trockner Temp/Zeit-Einstellungen',ace_dry_dialog_temp:'Temperatur (30-80°C)',ace_dry_dialog_time:'Restzeit (h:m:s)',ace_dry_dialog_confirm:'Bestätigen',ace_dry_dialog_cancel:'Abbrechen',ace_dry_dialog_save_restart:'Speichern & Neustart',ace_dry_dialog_custom_name:'Eigener Name',ace_dry_dialog_reset_default:'Auf Standard zurücksetzen',
   cam_placeholder:'📷 Kamera nicht gestartet',btn_cam_start:'▶ Kamera',btn_cam_stop:'◼ Kamera',
   btn_pause:'⏸ Pause',btn_resume:'▶ Weiter',btn_cancel:'✕ Stopp',
   label_nozzle:'Nozzle',label_bed:'Bett',label_fan:'🌀 Lüfter',label_light:'💡 Licht',label_on_off:'Ein / Aus',label_speed:'Geschwindigkeit',
@@ -112,7 +112,7 @@ var LANG_DE={
   settings_title:'Einstellungen',settings_connection:'Verbindung',settings_print:'Druckeinstellungen',settings_poll:'Poll-Intervall',settings_version:'Version',
   settings_save:'Speichern & Neustart',settings_printer_name:'Drucker-Name',settings_printer_ip:'Drucker-IP',settings_mqtt_port:'MQTT-Port',
   settings_username:'MQTT-Benutzername',settings_password:'MQTT-Passwort',settings_device_id:'Device-ID',settings_mode_id:'Mode-ID',hint_ip_no_port:'Nur IP-Adresse, kein Port (z.B. 192.168.1.102)',
-  settings_default_slot:'Standard-Slot (Einfarbdruck)',settings_slot_auto:'Auto (alle belegten Slots)',settings_auto_leveling:'Auto-Leveling vor Druck',
+  settings_default_slot:'Standard-Slot (Einfarbdruck)',settings_slot_auto:'Auto (alle belegten Slots)',settings_auto_leveling:'Auto-Leveling vor Druck',settings_camera_on_print:'Kamera bei Druckstart einschalten',
   update_check:'Auf Updates prüfen',update_checking:'Prüfe...',update_available:'verfügbar',update_none:'Bereits aktuell',
   update_apply:'Jetzt installieren',update_applying:'Lade herunter...',update_restarting:'Starte neu...',update_error:'Fehler',
   btn_connect:'⚡ Verbinden',btn_disconnect:'✕ Trennen',
@@ -121,7 +121,7 @@ var LANG_DE={
   slot_edit_load:'⬇ Einziehen',slot_edit_unload:'⬆ Ausziehen',
   slot_edit_save:'💾 Speichern',slot_edit_custom:'z.B. PLA, PETG, ABS…',
   slot_edit_ok:'AMS Slot',
-  log_dir_all:'Alle',
+  log_dir_all:'Alle',log_lvl_label:'Level:',
   file_ready_btn:'▶ Druck starten',
   file_slots_btn:'🎨 Slots wählen',
   file_cancel_btn:'✕ Abbrechen',
@@ -159,7 +159,7 @@ var LANG_EN={
   card_progress:'Progress',card_temps:'Temperatures',card_light_fan:'Fan',card_speed:'Print Speed',card_cam:'Camera',lbl_elapsed:'Elapsed:',lbl_remaining:'Remaining:',lbl_slicer_time:'Slicer estimate:',lbl_layers:'Layer',
   speed_silent:'🐢 Silent',speed_normal:'⚡ Normal',speed_sport:'🚀 Sport',
   lbl_light:'💡 Light',lbl_feed:'Load',lbl_unload:'Unload',
-  card_ace_dry:'ACE Drying',ace_dry_dryer:'Dryer',ace_dry_status_off:'Status: Off',ace_dry_status_on:'Status: Active',ace_dry_status_remaining:'Remaining',ace_dry_humidity:'Humidity',ace_dry_current_temp:'Temperature',ace_dry_chart:'History (Temp/Humidity)',ace_dry_temp:'Temperature (°C)',ace_dry_duration:'Duration (min)',ace_dry_start:'▶ Start',ace_dry_stop:'■ Stop',ace_dry_auto_refill:'Auto Refill',ace_dry_enable:'Enable Drying',ace_dry_temp_line:'Drying Temperature',ace_dry_time_line:'Drying Time',ace_dry_ui_pending:'(UI only, backend next)',ace_dry_dialog_title:'Dryer Temp/Time Settings',ace_dry_dialog_temp:'Temperature (30-80°C)',ace_dry_dialog_time:'Rem. Time (h:m:s)',ace_dry_dialog_confirm:'Confirm',ace_dry_dialog_cancel:'Cancel',ace_dry_dialog_save_restart:'Save & Restart',ace_dry_dialog_custom_name:'Custom Name',
+  card_ace_dry:'ACE Drying',ace_dry_dryer:'Dryer',ace_dry_status_off:'Status: Off',ace_dry_status_on:'Status: Active',ace_dry_status_remaining:'Remaining',ace_dry_humidity:'Humidity',ace_dry_current_temp:'Temperature',ace_dry_chart:'History (Temp/Humidity)',ace_dry_temp:'Temperature (°C)',ace_dry_duration:'Duration (min)',ace_dry_start:'▶ Start',ace_dry_stop:'■ Stop',ace_dry_auto_refill:'Auto Refill',ace_dry_enable:'Enable Drying',ace_dry_temp_line:'Drying Temperature',ace_dry_time_line:'Drying Time',ace_dry_ui_pending:'(UI only, backend next)',ace_dry_dialog_title:'Dryer Temp/Time Settings',ace_dry_dialog_temp:'Temperature (30-80°C)',ace_dry_dialog_time:'Rem. Time (h:m:s)',ace_dry_dialog_confirm:'Confirm',ace_dry_dialog_cancel:'Cancel',ace_dry_dialog_save_restart:'Save & Restart',ace_dry_dialog_custom_name:'Custom Name',ace_dry_dialog_reset_default:'Reset to Default',
   cam_placeholder:'📷 Camera not started',btn_cam_start:'▶ Camera',btn_cam_stop:'◼ Camera',
   btn_pause:'⏸ Pause',btn_resume:'▶ Resume',btn_cancel:'✕ Stop',
   label_nozzle:'Nozzle',label_bed:'Bed',label_fan:'🌀 Fan',label_light:'💡 Light',label_on_off:'On / Off',label_speed:'Speed',
@@ -175,7 +175,7 @@ var LANG_EN={
   settings_title:'Settings',settings_connection:'Connection',settings_print:'Print Settings',settings_poll:'Poll Interval',settings_version:'Version',
   settings_save:'Save & Restart',settings_printer_name:'Printer Name',settings_printer_ip:'Printer IP',settings_mqtt_port:'MQTT Port',
   settings_username:'MQTT Username',settings_password:'MQTT Password',settings_device_id:'Device ID',settings_mode_id:'Mode ID',hint_ip_no_port:'IP address only, no port (e.g. 192.168.1.102)',
-  settings_default_slot:'Default Slot (single color)',settings_slot_auto:'Auto (all loaded slots)',settings_auto_leveling:'Auto-Leveling before print',
+  settings_default_slot:'Default Slot (single color)',settings_slot_auto:'Auto (all loaded slots)',settings_auto_leveling:'Auto-Leveling before print',settings_camera_on_print:'Turn camera on at print start',
   update_check:'Check for Updates',update_checking:'Checking...',update_available:'available',update_none:'Already up to date',
   update_apply:'Install Now',update_applying:'Downloading...',update_restarting:'Restarting...',update_error:'Error',
   btn_connect:'⚡ Connect',btn_disconnect:'✕ Disconnect',
@@ -184,7 +184,7 @@ var LANG_EN={
   slot_edit_load:'⬇ Load',slot_edit_unload:'⬆ Unload',
   slot_edit_save:'💾 Save',slot_edit_custom:'e.g. PLA, PETG, ABS…',
   slot_edit_ok:'AMS Slot',
-  log_dir_all:'All',
+  log_dir_all:'All',log_lvl_label:'Level:',
   file_ready_btn:'▶ Start Print',
   file_slots_btn:'🎨 Select Slots',
   file_cancel_btn:'✕ Cancel',
@@ -362,6 +362,7 @@ function applyLang(){
   setText('lbl-default-slot',T.settings_default_slot);
   setText('opt-slot-auto',T.settings_slot_auto);
   setText('lbl-auto-leveling',T.settings_auto_leveling);
+  setText('lbl-camera-on-print',T.settings_camera_on_print);
 
   setText('lbl-update-check',T.update_check);
   setText('lbl-update-apply',T.update_apply);
@@ -402,6 +403,8 @@ function applyLang(){
   updateSlotEditFeedButton();
   var mi=document.getElementById('slot-edit-mat');if(mi)mi.setAttribute('placeholder',T.slot_edit_custom);
   setText('logdir-all',T.log_dir_all);
+  setText('loglvl-all',T.log_dir_all);
+  setText('log-lbl-level',T.log_lvl_label);
   setText('file-ready-btn',T.file_ready_btn);
   setText('file-slots-btn',T.file_slots_btn);
   setText('file-cancel-btn',T.file_cancel_btn);
@@ -480,6 +483,7 @@ var consoleLogs=[];
 var logAutoScroll=true;
 var logBadgeCount=0;
 var logDirFilter='all';   // 'all'|'rx'|'tx'
+var logLevelFilter='all'; // 'all'|'err'|'warn'
 var logTopicFilter='';    // '' = no topic filter
 
 function clog(msg,cls){
@@ -496,16 +500,41 @@ function _lvlCls(lvl){
 function _appendLog(entry,forceCls){
   var cls=forceCls||_lvlCls(entry.lvl);
   var label=entry.name?'['+entry.name+'] ':'';
-  consoleLogs.push({ts:entry.ts,msg:label+entry.msg,cls:cls});
+  var fullMsg=label+entry.msg;
+  // Wiederholungen als Zähler zusammenfassen (×N) statt N identische Zeilen.
+  var last=consoleLogs[consoleLogs.length-1];
+  if(last&&last.msg===fullMsg&&last.cls===cls){
+    last.count=(last.count||1)+1;
+    last.ts=entry.ts; // letzte Sichtung
+    renderLog();
+    return;
+  }
+  consoleLogs.push({ts:entry.ts,msg:fullMsg,cls:cls,count:1});
   if(consoleLogs.length>500)consoleLogs.shift();
-  // Badge wenn Tab nicht aktiv und Fehler/Warnungen
+  // Badge + Toast wenn Tab nicht aktiv und Fehler/Warnungen
   if(currentPanel!=='console'&&(cls==='msg-err'||cls==='msg-warn')){
     logBadgeCount++;
     var bc=logBadgeCount>99?'99+':logBadgeCount;
     ['log-badge','log-badge-bot'].forEach(function(id){var b=document.getElementById(id);if(b){b.style.display='inline';b.textContent=bc;}});
   }
+  if(cls==='msg-err')showToast(entry.msg.split('\n')[0]);
   renderLog();
 }
+// Kurze rote Snackbar bei Fehlern (auch wenn Konsole-Tab nicht offen).
+var _toastTimer=null;
+function showToast(msg){
+  var t=document.getElementById('kx-toast');
+  if(!t){
+    t=document.createElement('div'); t.id='kx-toast';
+    t.style.cssText='position:fixed;bottom:20px;left:50%;transform:translateX(-50%);background:var(--err);color:#fff;padding:10px 18px;border-radius:8px;font-size:13px;z-index:9999;max-width:90vw;box-shadow:0 4px 16px rgba(0,0,0,.4);cursor:pointer';
+    t.onclick=function(){showPanel('console');t.style.display='none';};
+    document.body.appendChild(t);
+  }
+  t.textContent='⚠ '+msg;
+  t.style.display='block';
+  clearTimeout(_toastTimer);
+  _toastTimer=setTimeout(function(){t.style.display='none';},6000);
+}
 function setLogDir(dir){
   logDirFilter=dir;
   document.querySelectorAll('.log-dir-btn').forEach(function(b){
@@ -514,6 +543,14 @@ function setLogDir(dir){
   });
   renderLog();
 }
+function setLogLevel(lvl){
+  logLevelFilter=lvl;
+  document.querySelectorAll('.log-lvl-btn').forEach(function(b){
+    b.style.background=b.id==='loglvl-'+lvl?'var(--accent)':'var(--raised)';
+    b.style.color=b.id==='loglvl-'+lvl?'#fff':'var(--txt2)';
+  });
+  renderLog();
+}
 function setLogTopic(topic){
   var inp=document.getElementById('log-filter');
   var active=inp.value===topic;
@@ -534,11 +571,16 @@ function renderLog(){
     var m=l.msg;
     if(logDirFilter==='rx'&&!/ RX[ (]/.test(m))return false;
     if(logDirFilter==='tx'&&!/ TX[ (]/.test(m))return false;
+    if(logLevelFilter==='err'&&l.cls!=='msg-err')return false;
+    if(logLevelFilter==='warn'&&l.cls!=='msg-err'&&l.cls!=='msg-warn')return false;
     if(fl&&!m.toLowerCase().includes(fl))return false;
     return true;
   });
   var savedScroll=logAutoScroll?null:el.scrollTop;
-  el.innerHTML=rows.map(l=>`<div><span class="ts">${l.ts}</span><span class="${l.cls}">${escHtml(l.msg)}</span></div>`).join('');
+  el.innerHTML=rows.map(function(l){
+    var cnt=(l.count&&l.count>1)?' <span style="opacity:.7">(×'+l.count+')</span>':'';
+    return '<div><span class="ts">'+l.ts+'</span><span class="'+l.cls+'">'+escHtml(l.msg)+'</span>'+cnt+'</div>';
+  }).join('');
   if(logAutoScroll)el.scrollTop=el.scrollHeight;
   else if(savedScroll!==null)el.scrollTop=savedScroll;
 }
@@ -867,6 +909,7 @@ function openSettings(){
     document.getElementById('s-mode-id').value=d.mode_id||'';
     document.getElementById('s-default-slot').value=d.default_ams_slot||'auto';
     document.getElementById('s-auto-leveling').checked=(d.auto_leveling===undefined?true:!!d.auto_leveling);
+    var cop=document.getElementById('s-camera-on-print');if(cop)cop.checked=!!d.camera_on_print;
   });
   var v=localStorage.getItem('pollInterval')||'2000';
   document.querySelectorAll('.poll-btn').forEach(function(b){b.classList.remove('active')});
@@ -1007,6 +1050,7 @@ function saveSettings(){
     mode_id:          document.getElementById('s-mode-id').value,
     default_ams_slot: document.getElementById('s-default-slot').value,
     auto_leveling:    document.getElementById('s-auto-leveling').checked?1:0,
+    camera_on_print:  (document.getElementById('s-camera-on-print')||{}).checked?1:0,
   }).then(function(){
     btn.textContent=T.update_restarting;
     setTimeout(function(){
@@ -1577,6 +1621,10 @@ function formatDur(sec){
 var _storeFileId=null;
 var _storeFilename=null;
 var _filamentDialogMode='store'; // 'store' oder 'banner'
+// GCode-Store-Dateiliste. MUSS deklariert sein – sonst ReferenceError, wenn
+// "Slots wählen" im Banner geklickt wird, bevor der Browser-Tab je geladen
+// wurde (Issue #29 / Theme-Auslagerung PR #27).
+var storeFiles=[];
 
 var _gcodeFilaments=[];
 

web/themes/default/index.html

@@ -94,6 +94,10 @@
         <input type="checkbox" id="s-auto-leveling" style="width:auto;margin:0">
         <label id="lbl-auto-leveling" style="margin:0;cursor:pointer" for="s-auto-leveling">Auto-Leveling vor Druck</label>
       </div>
+      <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
+        <input type="checkbox" id="s-camera-on-print" style="width:auto;margin:0">
+        <label id="lbl-camera-on-print" style="margin:0;cursor:pointer" for="s-camera-on-print">Kamera bei Druckstart einschalten</label>
+      </div>
     </div>
 
     <div>
@@ -406,7 +410,7 @@
       <div class="card">
         <div class="card-title" style="display:flex;justify-content:space-between;align-items:center">
           <span><span>≡</span> <span id="ptitle-console">Ereignis-Log</span></span>
-          <a id="btn-log-dl" href="/api/log/download" download="kx-bridge.log"
+          <a id="btn-log-dl" href="/api/log/download" download
              style="font-size:12px;padding:4px 10px;background:var(--raised);border-radius:6px;color:var(--txt2);text-decoration:none">⬇ Download</a>
         </div>
         <div style="display:flex;gap:6px;margin-bottom:6px;flex-wrap:wrap;align-items:center">
@@ -423,6 +427,10 @@
           <button class="log-dir-btn active" id="logdir-all"  onclick="setLogDir('all')"  style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer"></button>
           <button class="log-dir-btn"        id="logdir-rx"   onclick="setLogDir('rx')"   style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">RX</button>
           <button class="log-dir-btn"        id="logdir-tx"   onclick="setLogDir('tx')"   style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">TX</button>
+          <span style="font-size:11px;color:var(--txt2);align-self:center;margin-left:6px;margin-right:2px" id="log-lbl-level">Level:</span>
+          <button class="log-lvl-btn active" id="loglvl-all"  onclick="setLogLevel('all')"  style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer"></button>
+          <button class="log-lvl-btn"        id="loglvl-err"  onclick="setLogLevel('err')"  style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">⛔ Errors</button>
+          <button class="log-lvl-btn"        id="loglvl-warn" onclick="setLogLevel('warn')" style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">⚠ Warn</button>
           <span style="font-size:11px;color:var(--txt2);align-self:center;margin-left:6px;margin-right:2px">Topic:</span>
           <button class="log-topic-btn" data-topic="multiColorBox" onclick="setLogTopic('multiColorBox')" style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">AMS</button>
           <button class="log-topic-btn" data-topic="print"         onclick="setLogTopic('print')"         style="font-size:11px;padding:3px 9px;border-radius:5px;border:1px solid var(--border);cursor:pointer">print</button>

web/themes/default/style.css

@@ -1,4 +1,5 @@
 :root{
+  color-scheme:dark; /* native Form-Controls (select) im Webview dunkel rendern */
   --bg:#1a1a1f;--card:#24242c;--raised:#2e2e3a;--border:#3a3a4a;
   --txt:#f0f0f5;--txt2:#8888aa;--accent:#00c8ff;--accent2:#ff6b35;
   --ok:#4cde80;--err:#ff4d6d;--warn:#ffb020;
@@ -6,12 +7,17 @@
   --mono:"JetBrains Mono","Fira Code",monospace;
 }
 [data-theme=light]{
+  color-scheme:light;
   --bg:#f0f0f5;--card:#fff;--raised:#e8e8f0;--border:#d0d0e0;
   --txt:#1a1a2e;--txt2:#666680;
 }
 *{box-sizing:border-box;margin:0;padding:0}
 body{background:var(--bg);color:var(--txt);font-family:var(--font);font-size:14px;min-height:100vh;display:flex;flex-direction:column}
 a{color:var(--accent);text-decoration:none}
+/* select/option-Farben explizit setzen — OrcaSlicers Device-Tab-Webview erbt
+   sie sonst nicht und rendert weiße Schrift auf weißem Grund (Issue #29). */
+select{background:var(--raised)!important;color:var(--txt)!important}
+select option{background:var(--card)!important;color:var(--txt)!important}
 
 /* ── HEADER ── */
 header{background:var(--card);border-bottom:1px solid var(--border);