build: sources for v0.9.18

Native-speaker review der spanischen Übersetzung — fehlende Akzente
(impresión, cámara, después, animación, …) und sprachliche
Korrekturen (Pause→Pausa, Start→Iniciar, Layer→Capa, Stream→Stream).
Zusätzlich neue README.es.md plus Links in README.md + README.de.md.

.gitignore

@@ -9,3 +9,11 @@ releases/*/extract_credentials
 releases/*/extract_credentials.exe
 
 !kx-bridge.spec
+
+# Laufzeit-Daten und Drucker-Credentials — nie committen
+config/config.ini
+config/*.ini
+!config/config.ini.example
+data/
+
+!data/orca_filaments.json

CHANGELOG.de.md

@@ -1,5 +1,133 @@
 # Changelog
 
+## [0.9.18] – 2026-05-31
+
+### Neu
+- **🎉 Filament-Material und -Farbe pro AMS-Slot aus der Bridge an den
+  Drucker senden:** Im Slot-Edit-Dialog gewählte Werte gehen jetzt
+  tatsächlich an den Drucker und werden persistent übernommen — am
+  Drucker-Display siehst du sofort dieselbe Belegung wie in der Bridge-UI.
+  In 0.9.17 wurde der Befehl über das falsche MQTT-Topic
+  (`slicer/printer/…`) gesendet, der Drucker hat ihn stillschweigend
+  ignoriert. Jetzt geht er über `web/printer/…` wie der Anycubic
+  Slicer Next es macht (verifiziert via Live-MQTT-Sniff +
+  Workbench-Vue-Source). **Achtung:** der aktiv geladene Slot kann
+  während des Drucks nicht umgeschrieben werden — vorher ausziehen.
+- **Mehrsprachiges UI – spanische Übersetzung von Muttersprachler
+  überarbeitet (PR #40 von @pezfisk):** fehlende Akzente
+  (impresión, cámara, después, animación, …), Begriffe vereinheitlicht
+  (Pause → Pausa, Start → Iniciar, Layer → Capa). Plus neues
+  `README.es.md` und Cross-Links in den drei READMEs.
+- **Z-Höhen-Anzeige in Obico** funktioniert jetzt. Der Drucker liefert
+  keine echte Z-Position via MQTT (per Live-Sniff bestätigt), die Bridge
+  schätzt sie aus `curr_layer × layer_height + first_layer_height`.
+  Layer-Heights kommen aus dem GCode-Header beim Upload, persistiert
+  im GCode-Store; Fallback aus dem OrcaSlicer-Default-Filename
+  (`…_0.2_…gcode`). `/server/files/metadata` liefert zusätzlich
+  `object_height` (Gesamt-Z), damit Obicos `mmProgress`-Widget
+  `aktuelles Z / Gesamt-Z` anzeigt.
+- **Slot-Karte zeigt den OrcaSlicer-Profil-Vendor** unter dem Material
+  (z.B. „PLA / Polymaker"), mit Profil-Namen + interner ID als
+  Tooltip. So ist auf einen Blick erkennbar welcher Slot-Override
+  aktiv ist.
+
+### Fixes
+- **Slot-Profil-Auswahl im AMS-Dialog (Issue #39 von @harrygeier):**
+  drei separate Bugs in 0.9.17 sorgten dafür dass die gewählte Marke
+  nach dem Speichern verschwand und beim erneuten Öffnen ein falsches
+  Material angezeigt wurde.
+  - `multiColorBox/setInfo` über das falsche MQTT-Topic — siehe oben.
+  - Speichern lief in zwei parallelen Requests (Profil-Override +
+    Material/Farbe) → Race-Bedingung. Läuft jetzt sequenziell und
+    reloaded den lokalen State bevor der Dialog geschlossen wird.
+  - OrcaSlicer-Filament-IDs sind nicht eindeutig — `orca_filaments.json`
+    hat 68 duplikate IDs, `OGFL99` allein ist 136 Vendor-Profilen
+    zugeordnet (Erkenntnis von @gangoke). Der primäre Selector ist
+    jetzt `(vendor, name)` — über alle 1002 Profile eindeutig.
+- **MQTT-Reconnect (Issue #33 von @icebear):** wurde der Drucker über
+  Nacht ausgeschaltet, schlug die Bridge nach 5 Reconnect-Versuchen
+  (~60 s gesamt) endgültig fehl — Filament-Sync ging morgens noch
+  (weil das HTTP ist), aber Print-Start scheiterte mit
+  „connection refused", User musste die Bridge selbst neu starten.
+  Reader-Thread reconnectet jetzt **endlos** (Backoff cappt bei 60 s)
+  bis der Drucker wieder antwortet, mit DEBUG-Logging nach den ersten
+  5 Versuchen damit das Log nicht über Nacht zugemüllt wird.
+- **„Unknown child pid"-Warnungen im Log:** beim Killen der Kamera-
+  `ffmpeg`-Prozesse fehlte das `wait()` — Children blieben als
+  Zombies und asyncio meldete sie alle ~20 s. Gefixt im CameraCache
+  + `/api/camera/stream`.
+
+### UI-Aufräumen
+- **Pause-Button als Toggle:** druckt der Drucker → `⏸ Pause`, ist
+  pausiert → `▶ Weiter`. Der separate „Weiter"-Button entfällt.
+- **Pause + Stopp komplett ausgeblendet wenn Drucker idle** — bei
+  Standby waren beide Buttons vorher dauerhaft sichtbar, was beim
+  Idle-Drucker verwirrend wirkte.
+
+### Build
+- **GCode-Store-Migration:** neue Spalten `layer_height` +
+  `first_layer_height` in `gcode_files` (automatisch beim ersten
+  Start von 0.9.18 angelegt).
+
+## [0.9.17] – 2026-05-30
+
+### Neu
+- **🧪 Obico-Anbindung (experimentell):** Die Bridge spielt jetzt einen
+  Moonraker, der vom [moonraker-obico](https://github.com/TheSpaghettiDetective/moonraker-obico)
+  Plugin akzeptiert wird. Damit funktionieren Time-Lapse, Layer-aligned
+  First-Layer-Scan und WebRTC-Live-Stream gegen einen (selbst gehosteten oder
+  Cloud-) Obico-Server. **Hinweis:** Das KI-Modell zur Spaghetti-Erkennung
+  ist auf seitliche Kamera-Winkel (Ender/Voron) trainiert — wie zuverlässig
+  es beim Kobra X mit Top-Down-Kamera funktioniert, muss empirisch getestet
+  werden (bei uns ging es schon ganz gut). Stream, Time-Lapse und Telemetrie
+  laufen, die Failure-Erkennung ist deshalb noch als experimentell markiert.
+- **Mehrsprachiges UI (PR #37 von @gangoke):** Inline-Translations sind raus,
+  stattdessen wechselbares Sprach-Dropdown mit Globe-Icon. Auto-Auswahl nach
+  Browser-Locale, manuelle Wahl wird im LocalStorage gemerkt. Sprachen: 🇩🇪 🇬🇧
+  🇪🇸 🇨🇳 (ES + ZH-CN sind KI-übersetzt und noch nicht von Muttersprachlern
+  geprüft).
+- **OrcaSlicer-Filament-Profil pro AMS-Slot:** Im Slot-Bearbeiten-Dialog kannst
+  du jetzt ein konkretes OrcaSlicer-Profil (z.B. „PolyTerra PLA — Polymaker")
+  pro Slot wählen — die Bridge sendet diese Information beim AMS-Sync mit,
+  statt nur „Generic PLA". Die Profil-Liste wird aus dem OrcaSlicer-Source
+  generiert (~1000 Profile, 43 Hersteller). Damit OrcaSlicer den Hint
+  vollständig respektiert, wird ein passender Patch im OrcaSlicer-KX-Build
+  folgen.
+- **H.264-Direkt-Stream:** Neuer Endpunkt `/api/camera/h264` liefert den
+  Drucker-Kamera-Stream ohne Re-Encoding als MPEG-TS — Latenz drastisch
+  reduziert, Bridge-CPU bei Obico-Stream von ~13 % auf ~3 %.
+
+### Fixes
+- **Temperatur-Setzen über Bridge-UI / Obico löste Drucker-Systemfehler aus:**
+  Per Live-MQTT-Sniff vom Anycubic Slicer Next korrigiert — der Befehl
+  `tempature/set` braucht ein `type`-Feld (0=Nozzle, 1=Bett, 2=beide) und
+  muss über das `web/printer/…`-Topic, nicht `slicer/printer/…`. Nozzle/Bett
+  über die Bridge heizen jetzt sauber.
+- **Große GCode-Uploads (>50 MB) brachen mit Timeout ab:** Der
+  Connect-Timeout vom Socket lief auch während des `sendall()` — bei ~200 MB
+  über LAN brauchte das Schieben mehr als die 30 s und wurde fälschlich als
+  Connect-Timeout abgebrochen. Jetzt sind Connect-, Send- und Read-Phase
+  separat getimeoutet.
+- **Kamera-Snapshot war langsam und konnte sich mit dem Live-Stream blockieren:**
+  Die Bridge hält nun einen zentralen Kamera-Cache (ein einziger ffmpeg-Prozess
+  zieht vom Drucker, alle Konsumenten teilen sich den Stream). Snapshots
+  kommen in ~1.3 ms aus dem RAM statt nach 1-2 s per neuer ffmpeg-Instanz.
+  Behebt außerdem das Single-Client-Limit am Drucker (HTTP 429 bei parallelen
+  Zugriffen).
+- **Sprachwechsel aktualisierte den GCode-Browser nicht:** Die in die
+  File-Karten eingebackenen Texte („Drucken", „Schätzung", „Download") blieben
+  in der alten Sprache. Beim Sprachwechsel werden die Karten jetzt neu
+  gerendert.
+- **GCode Web-Upload + Download + Verify-Dialog (PR #32 von @gangoke):**
+  Dateien können direkt im Browser hoch/runtergeladen werden, mit
+  Warn-Dialog wenn ein nicht durch OrcaSlicer hochgeladener GCode gestartet
+  wird.
+
+### CI/Build
+- Multi-Arch Docker-Image (amd64 + arm64) per Gitea-Actions automatisiert.
+- Release-Build über lokalen CodeBuilder für alle drei Targets
+  (linux-amd64, linux-arm64, windows.exe).
+
 ## [0.9.16] – 2026-05-22
 
 ### Neu

CHANGELOG.md

@@ -1,5 +1,131 @@
 # Changelog
 
+## [0.9.18] – 2026-05-31
+
+### New
+- **🎉 Push filament material and colour from the bridge to the
+  printer:** The values you pick in the slot-edit dialog now actually
+  reach the printer and stick — the printer display shows the same
+  slot setup as the bridge UI right away. In 0.9.17 the command was
+  sent over the wrong MQTT topic (`slicer/printer/…`) and the printer
+  silently dropped it. It now goes via `web/printer/…` like the
+  Anycubic Slicer Next does (verified by live MQTT sniff +
+  Workbench-Vue source). **Note:** the currently loaded slot can not
+  be overwritten during a print — unload it first.
+- **Spanish translation reviewed by a native speaker (PR #40 by
+  @pezfisk):** missing accents (impresión, cámara, después,
+  animación, …) and term consistency (Pause → Pausa, Start →
+  Iniciar, Layer → Capa). New `README.es.md` and cross-links between
+  the three READMEs.
+- **Z-height now shows up in Obico.** The printer does not report a
+  real Z position over MQTT (live-sniff confirmed), so the bridge
+  estimates it from `current_layer × layer_height + first_layer_height`.
+  Layer heights are parsed from the gcode header at upload time and
+  persisted in the gcode store; fallback for prints started directly
+  from the slicer is the OrcaSlicer default filename pattern
+  (`…_0.2_…gcode`). `/server/files/metadata` also serves
+  `object_height` (total Z) so Obicos `mmProgress` widget can render
+  `current Z / total Z`.
+- **Slot card shows the OrcaSlicer profile vendor** under the
+  material (e.g. `PLA / Polymaker`), with the profile name + internal
+  ID as tooltip. Lets you see at a glance which slot override is
+  active.
+
+### Fixes
+- **Slot profile picker in the AMS dialog (issue #39 by
+  @harrygeier):** three separate bugs in 0.9.17 caused the chosen
+  brand to disappear after save and a different material to show up
+  on re-open.
+  - `multiColorBox/setInfo` was sent on the wrong MQTT topic — see
+    above.
+  - Save fired two parallel requests (profile override + material/
+    colour) → race. Now sequential, and the local state is reloaded
+    before the dialog closes.
+  - OrcaSlicer filament IDs are not unique — `orca_filaments.json`
+    has 68 duplicate IDs, `OGFL99` alone is shared by 136 vendor
+    profiles (caught by @gangoke). The primary selector is now
+    `(vendor, name)` — unique across all 1002 profiles.
+- **MQTT reconnect (issue #33 by @icebear):** if the printer was
+  powered off overnight the bridge gave up after 5 reconnect attempts
+  (~60 s total) — filament sync still worked in the morning (its
+  HTTP), but starting a print failed with `connection refused` and
+  the user had to restart the bridge itself. The reader thread now
+  reconnects **forever** (backoff caps at 60 s) until the printer
+  responds again, with logs dropping to DEBUG after the first 5
+  attempts so an overnight outage does not spam the log.
+- **`Unknown child pid` warnings in the log:** the camera ffmpeg
+  helpers were killed without awaiting their `wait()` — children
+  lingered as zombies and asyncio reported them every ~20 s. Fixed
+  in CameraCache + `/api/camera/stream`.
+
+### UI polish
+- **Pause button is now a toggle:** while printing → `⏸ Pause`,
+  while paused → `▶ Resume`. The separate resume button is gone.
+- **Pause + stop hidden when the printer is idle** — both used to be
+  visible at all times, which was confusing on a standby printer.
+
+### Build
+- **gcode store migration:** new columns `layer_height` +
+  `first_layer_height` on `gcode_files` (added automatically on first
+  start of 0.9.18).
+
+## [0.9.17] – 2026-05-30
+
+### New
+- **🧪 Obico integration (experimental):** The bridge now exposes a
+  Moonraker-compatible surface that the
+  [moonraker-obico](https://github.com/TheSpaghettiDetective/moonraker-obico)
+  plugin accepts. Time-lapses, layer-aligned first-layer scan and WebRTC
+  live streaming work against a (self-hosted or cloud) Obico server.
+  **Note:** the spaghetti-detection ML model is trained on side-view
+  cameras (Ender/Voron); how well it works with the Kobra X's top-down
+  camera is still to be evaluated empirically (it already looked
+  promising in our tests). Stream, time-lapse and telemetry work — the
+  failure-detection side stays flagged as experimental for now.
+- **Multi-language UI (PR #37 by @gangoke):** Inline translations have
+  moved into JSON files; a globe-icon dropdown lets you switch language.
+  Browser locale is auto-detected; manual choice persists in
+  LocalStorage. Languages: 🇩🇪 🇬🇧 🇪🇸 🇨🇳 (ES + ZH-CN are AI-translated
+  and not verified by native speakers yet).
+- **OrcaSlicer filament profile per AMS slot:** The slot-edit dialog now
+  lets you pick a concrete OrcaSlicer profile (e.g. "PolyTerra PLA —
+  Polymaker") per slot; the bridge sends it along on AMS sync instead
+  of just "Generic PLA". Profile list is generated from the OrcaSlicer
+  source (~1000 profiles, 43 vendors). A matching patch in
+  OrcaSlicer-KX is on the way so OrcaSlicer fully honours the hint.
+- **H.264 direct stream:** New `/api/camera/h264` endpoint serves the
+  printer camera stream as MPEG-TS without re-encoding — dramatically
+  reduces latency, bridge CPU during Obico streaming drops from ~13 %
+  to ~3 %.
+
+### Fixes
+- **Setting temperature via bridge UI / Obico caused a printer system
+  error:** Fixed via live MQTT capture from Anycubic Slicer Next — the
+  `tempature/set` command needs a `type` field (0=nozzle, 1=bed,
+  2=both) and must go over the `web/printer/…` topic, not
+  `slicer/printer/…`. Nozzle/bed heating from the bridge now works.
+- **Large GCode uploads (>50 MB) timed out:** The socket connect timeout
+  was active during `sendall()` too — pushing ~200 MB over LAN took
+  more than 30 s and was falsely aborted. Connect / send / read phases
+  are now timed out separately.
+- **Camera snapshots were slow and could collide with the live stream:**
+  The bridge now keeps a central camera cache (one ffmpeg pulls from
+  the printer, all consumers share it). Snapshots return in ~1.3 ms
+  from RAM instead of 1–2 s per spawned ffmpeg. Also resolves the
+  single-client limit on the printer (HTTP 429 on parallel access).
+- **Language switch did not refresh the GCode browser:** Strings baked
+  into the file cards ("Print", "Estimate", "Download") stayed in the
+  previous language. Cards are now re-rendered on language switch.
+- **GCode web upload + download + verify dialog (PR #32 by @gangoke):**
+  Files can be uploaded / downloaded directly in the browser, with a
+  warning dialog when starting a GCode that was not uploaded via
+  OrcaSlicer.
+
+### CI/Build
+- Multi-arch Docker image (amd64 + arm64) automated via Gitea Actions.
+- Release builds for all three targets (linux-amd64, linux-arm64,
+  windows.exe) via the local CodeBuilder.
+
 ## [0.9.16] – 2026-05-22
 
 ### New

Dockerfile

@@ -7,6 +7,9 @@ RUN pip install --no-cache-dir -r requirements.txt
 
 COPY kobrax_moonraker_bridge.py .
 COPY web/ ./web/
+# Statische Daten (orca_filaments.json etc.) liegen in /app/static/, NICHT in
+# /app/data/ — letzteres wird vom User als Volume gemountet (Runtime-State).
+COPY data/ ./static/
 COPY config_loader.py .
 COPY env_loader.py .
 COPY kobrax_client.py .

README.de.md

@@ -8,7 +8,7 @@
 
 Eine Moonraker-kompatible Bridge, die direkt mit dem Drucker spricht.
 
-<sub>🇬🇧 <a href="README.md">English version</a></sub>
+<sub>🇬🇧 <a href="README.md">English version</a>  ·  🇪🇸 <a href="README.es.md">Versión española</a></sub>
 
 <br>
 
@@ -101,6 +101,23 @@ Drucker → Verbindungstyp **Moonraker** → Host: `http://BRIDGE-IP:7125`
 
 ---
 
+## 🎨 Empfohlener Slicer
+
+Für die beste Erfahrung mit der KX-Bridge bieten wir einen **gepatchten
+OrcaSlicer-Build**, der drei offene SoftFever/OrcaSlicer-PRs bündelt: das
+Anycubic-Kobra-X-Druckerprofil, einen Multicolor-G-Code-Fix und — am wichtigsten
+— einen Moonraker/Happy-Hare-Filament-Sync-Fix, der die AMS-Slot-Positionen auch
+bei einem leeren Slot in der Mitte korrekt beibehält.
+
+→ **[OrcaSlicer-KX Releases](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/releases/latest)** (Linux AppImage + Windows ZIP)
+
+Standard-OrcaSlicer funktioniert auch; der gepatchte Build verbessert
+hauptsächlich das AMS-Handling. Es ist ein Build von
+[OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) (AGPL-3.0); der Quellcode
+ist über die verlinkten PRs verfügbar.
+
+---
+
 ## 🏠 Community & Integrationen
 
 - **[Home-Assistant-Integration](https://github.com/gangoke/kobrax-lan-hass-component)**
@@ -132,9 +149,10 @@ dann `extract_credentials` ausführen → gibt Username, Passwort, Device-ID und
 ## ⚙️ Nützliche Befehle
 
 ```bash
-docker compose logs -f      # Logs anzeigen
-docker compose down         # Bridge stoppen
-docker compose up -d --build # Bridge neu bauen & starten (nach Update)
+docker compose logs -f                 # Logs anzeigen
+docker compose down                    # Bridge stoppen
+docker compose pull && docker compose up -d   # auf neueste veröffentlichte Version updaten
+docker compose up -d --build           # lokal selber bauen (statt zu pullen)
 ```
 
 ---

README.es.md

@@ -0,0 +1,224 @@
+<div align="center">
+
+<img src="knlogo.png" alt="KX-Bridge" width="160"/>
+
+# KX-Bridge
+
+**Controla tu Anycubic Kobra X con OrcaSlicer — sin Klipper, sin Raspberry Pi.**
+
+Un puente compatible con Moonraker que se comunica directamente con la impresora.
+
+<sub>🇬🇧 <a href="README.md">English version</a>  ·  🇩🇪 <a href="README.de.md">Deutsche Version</a></sub>
+
+<br>
+
+[![Ko-fi](https://img.shields.io/badge/Ko--fi-Apoya%20este%20proyecto-FF5E5B?style=for-the-badge&logo=ko-fi&logoColor=white)](https://ko-fi.com/viewitde)
+&nbsp;
+[![Releases](https://img.shields.io/badge/Descargar-Lanzamientos-2EA043?style=for-the-badge&logo=gitea&logoColor=white)](https://gitea.it-drui.de/viewit/KX-Bridge-Release/releases)
+&nbsp;
+[![Downloads](https://img.shields.io/badge/Descargas-800%2B-8957E5?style=for-the-badge&logo=gitea&logoColor=white)](https://gitea.it-drui.de/viewit/KX-Bridge-Release/releases)
+&nbsp;
+[![Video](https://img.shields.io/badge/YouTube-Tutorial-FF0000?style=for-the-badge&logo=youtube&logoColor=white)](https://www.youtube.com/watch?v=1Ql4wfH27fM)
+
+<sub>¿Te gusta KX-Bridge? Un café en <a href="https://ko-fi.com/viewitde">Ko-fi</a> mantiene el proyecto vivo. ☕</sub>
+
+</div>
+
+---
+
+## ✨ Características
+
+| | |
+|---|---|
+| 🖨️ | **Control de impresora** — iniciar, pausar, reanudar, cancelar, temperaturas, velocidad de impresión |
+| 📊 | **Estado en tiempo real** — temperatura, progreso, capas, tiempo restante, transmisión de cámara |
+| 🎨 | **AMS / multicolor** — ranuras de filamento, reasignación por canal, emulación MMU para sincronización de filamento en OrcaSlicer |
+| 🗂️ | **Explorador de GCode** — archivos subidos con vistas previas, historial de impresión, búsqueda y filtros |
+| 🧩 | **Multi-impresora** — múltiples impresoras en **una** instancia del puente, cambia mediante un menú desplegable |
+| ➕ | **Añade una impresora con un clic** — solo introduce la IP, las credenciales se importan automáticamente |
+| 🔄 | **Actualización automática** — instala nuevas versiones directamente desde el navegador |
+| 🌐 | **OrcaSlicer** — protocolo Moonraker completo (HTTP + WebSocket), interfaz EN/ES |
+
+---
+
+## 🚀 Inicio rápido
+
+### 1. Prepara la impresora
+
+Activa el modo LAN en la Kobra X:
+**Pantalla de la impresora → Ajustes → Activar modo LAN**
+
+### 2. Inicia el puente
+
+**Docker (recomendado):**
+```bash
+docker compose up -d
+```
+
+**Binario Linux (sin Docker):**
+```bash
+chmod +x kx-bridge && ./kx-bridge
+```
+
+**EXE Windows (sin Docker):**
+```
+kx-bridge.exe
+```
+> `config\` y `data\` se crean junto al EXE — instalación portátil.
+
+> Con los binarios de Linux y Windows, `config/` y `data/` (configuración, SQLite, almacén de GCode)
+> viven junto al programa. Copia toda la carpeta para mover la instalación.
+
+**Python directamente:**
+```bash
+pip install -r bridge/requirements.txt
+python bridge/kobrax_moonraker_bridge.py
+```
+
+### 3. Configura la impresora
+
+Abre la interfaz web: **`http://IP-DEL-PUENTE:7125`**
+
+En el primer inicio, la pestaña **Impresoras** muestra *"+ Añadir impresora"* — solo introduce la dirección IP
+de la impresora, el resto (usuario, contraseña, ID de dispositivo) se obtiene de la impresora y se desencripta
+automáticamente. Listo.
+
+> ¿Más de una impresora? Simplemente haz clic en *"+ Añadir impresora"* de nuevo — cada una recibe su propio puerto
+> (7125, 7126, …) y se puede seleccionar desde el menú desplegable del encabezado.
+
+### 4. Conecta OrcaSlicer
+
+Impresora → Tipo de conexión **Moonraker** → Host: `http://IP-DEL-PUENTE:7125`
+
+> ⚠️ El tipo de conexión debe ser **Moonraker** (no "Bambu" ni "Klipper").
+> Introduce la URL completa incluyendo `http://` y el puerto `:7125` en el campo de host.
+
+---
+
+## 📺 Vídeo tutorial
+
+[![Configuración y uso de KX-Bridge](https://img.youtube.com/vi/1Ql4wfH27fM/hqdefault.jpg)](https://www.youtube.com/watch?v=1Ql4wfH27fM)
+
+---
+
+## 🎨 Slicer recomendado
+
+Para la mejor experiencia con KX-Bridge ofrecemos una **versión modificada de OrcaSlicer** que
+incluye tres PRs abiertos de SoftFever/OrcaSlicer: el perfil de la impresora Anycubic Kobra
+X, una corrección de GCode multicolor y — lo más importante — una corrección de sincronización de
+filamento Moonraker/Happy-Hare que mantiene las posiciones de las ranuras AMS intactas incluso con una ranura vacía.
+
+→ **[Lanzamientos de OrcaSlicer-KX](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/releases/latest)** (Linux AppImage + Windows ZIP)
+
+OrcaSlicer estándar también funciona; la versión modificada mejora principalmente el manejo de AMS.
+Es una versión basada en [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) (AGPL-3.0);
+el código fuente está disponible a través de los PRs enlazados.
+
+---
+
+## 🏠 Comunidad e integraciones
+
+- **[Integración con Home Assistant](https://github.com/gangoke/kobrax-lan-hass-component)**
+  por [@gangoke](https://github.com/gangoke) — expone sensores, controles de impresión,
+  luz, cámara y la vista previa del GCode como entidades nativas de Home Assistant.
+
+> Estos son **proyectos de la comunidad**, no mantenidos ni soportados por KX-Bridge.
+> Para preguntas o problemas, utiliza el repositorio enlazado.
+
+---
+
+## 🔧 Obtener credenciales manualmente
+
+Normalmente no es necesario — *"+ Añadir impresora"* lo hace automáticamente. Si lo necesitas:
+
+```bash
+fetch_credentials --ip 192.168.x.x --write-config
+```
+Obtiene las credenciales directamente de la impresora vía HTTP y las escribe en `config/config.ini`.
+Solo se requiere la IP de la impresora, no hace falta un slicer.
+
+Alternativamente (si se desconoce la IP): abre AnycubicSlicerNext, conecta la impresora, luego ejecuta
+`extract_credentials` → muestra usuario, contraseña, ID de dispositivo y la IP de la impresora.
+
+> **Descargas:** [Lanzamientos](https://gitea.it-drui.de/viewit/KX-Bridge-Release/releases) → `fetch_credentials` / `extract_credentials` (Linux y Windows)
+
+---
+
+## ⚙️ Comandos útiles
+
+```bash
+docker compose logs -f                 # mostrar registros
+docker compose down                    # detener el puente
+docker compose pull && docker compose up -d   # actualizar a la imagen publicada más reciente
+docker compose up -d --build           # recompilar localmente (en lugar de descargar)
+```
+
+---
+
+## 🩹 Solución de problemas
+
+<details>
+<summary><b>"Credenciales MQTT incorrectas" al iniciar</b></summary>
+
+- Vuelve a añadir la impresora mediante *"+ Añadir impresora"*, o ejecuta
+  `fetch_credentials --ip <ip> --write-config` y reinicia el puente
+- Introduce solo la dirección IP, sin puerto (✗ `192.168.1.102:9883` → ✓ `192.168.1.102`)
+</details>
+
+<details>
+<summary><b>Impresora no encontrada / modo LAN no activado</b></summary>
+
+- En la pantalla de la impresora: Ajustes → Activar modo LAN
+- La impresora y el puente deben estar en la misma red
+</details>
+
+<details>
+<summary><b>Docker: Permiso denegado</b></summary>
+
+```bash
+sudo usermod -aG docker $USER   # luego cierra la sesión y vuelve a iniciarla
+```
+</details>
+
+<details>
+<summary><b>Actualizar desde 0.9.1 o anterior</b></summary>
+
+A partir de 0.9.2, KX-Bridge almacena la configuración en `config/config.ini` en lugar de `.env`.
+La migración se ejecuta automáticamente en el primer inicio después de la actualización — no requiere acción.
+</details>
+
+---
+
+## 🔒 Seguridad
+
+- El puente es accesible en la red local en `http://<IP-del-host>:7125` — **no** lo expongas a internet
+- `config/config.ini` contiene las credenciales de la impresora — no las compartas públicamente
+- Las credenciales **no** otorgan acceso a los servicios en la nube de Anycubic
+
+---
+
+## 📄 Licencia
+
+[![License: GPL v3](https://img.shields.io/badge/License-GPL_v3-blue.svg)](LICENSE)
+
+KX-Bridge se publica bajo la **GNU General Public License v3.0**. Consulta
+[LICENSE](LICENSE) para el texto completo. Las bifurcaciones y modificaciones deben
+permanecer bajo GPLv3 si se redistribuyen.
+
+La implementación del protocolo MQTT es el resultado de una ingeniería inversa
+independiente con fines de interoperabilidad (§69e UrhG / Directiva de Software de la UE
+Art. 6). El material de terceros en el repositorio (certificados TLS de Anycubic)
+**no** está cubierto por GPLv3 y se incluye únicamente para permitir la
+autenticación contra impresoras que el usuario final ya posee. Consulta
+[NOTICE.md](NOTICE.md) para más detalles y el aviso legal.
+
+Este proyecto es independiente y no está afiliado con Anycubic.
+
+<div align="center">
+<br>
+
+**Si KX-Bridge te ayuda, el proyecto agradece tu apoyo:**
+
+[![Ko-fi](https://ko-fi.com/img/githubbutton_sm.svg)](https://ko-fi.com/viewitde)
+
+</div>

README.md

@@ -8,7 +8,7 @@
 
 A Moonraker-compatible bridge that talks directly to the printer.
 
-<sub>🇩🇪 <a href="README.de.md">Deutsche Version</a></sub>
+<sub>🇩🇪 <a href="README.de.md">Deutsche Version</a>  ·  🇪🇸 <a href="README.es.md">Versión española</a></sub>
 
 <br>
 
@@ -101,6 +101,21 @@ Printer → Connection type **Moonraker** → Host: `http://BRIDGE-IP:7125`
 
 ---
 
+## 🎨 Recommended Slicer
+
+For the best KX-Bridge experience we offer a **patched OrcaSlicer build** that
+bundles three open SoftFever/OrcaSlicer PRs: the Anycubic Kobra X printer
+profile, a multicolor G-code fix and — most importantly — a Moonraker/Happy-Hare
+filament-sync fix that keeps AMS slot positions intact even with an empty slot.
+
+→ **[OrcaSlicer-KX releases](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/releases/latest)** (Linux AppImage + Windows ZIP)
+
+Standard OrcaSlicer also works; the patched build mainly improves AMS handling.
+It's a build of [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) (AGPL-3.0);
+source is available via the linked PRs.
+
+---
+
 ## 🏠 Community & Integrations
 
 - **[Home Assistant integration](https://github.com/gangoke/kobrax-lan-hass-component)**
@@ -132,9 +147,10 @@ Alternatively (if the IP is unknown): open AnycubicSlicerNext, connect the print
 ## ⚙️ Useful commands
 
 ```bash
-docker compose logs -f       # show logs
-docker compose down          # stop the bridge
-docker compose up -d --build # rebuild & start (after an update)
+docker compose logs -f                 # show logs
+docker compose down                    # stop the bridge
+docker compose pull && docker compose up -d   # update to the latest published image
+docker compose up -d --build           # rebuild locally (instead of pulling)
 ```
 
 ---

VERSION

@@ -1 +1 @@
-0.9.16
+0.9.18

config.ini.example

@@ -2,8 +2,10 @@
 # Kopiere diese Datei nach config.ini und trage deine Werte ein:
 #   cp config.ini.example config.ini
 #
-# Credentials mit extract_credentials.exe (Windows) oder
-# extract_credentials (Linux) aus dem laufenden AnycubicSlicerNext auslesen.
+# Credentials automatisch eintragen:
+#   python3 tools/fetch_credentials.py --ip 192.168.x.x --write-config
+# Alternativ (Windows, ohne Drucker-IP bekannt):
+#   extract_credentials.exe --write-env  (liest aus laufendem AnycubicSlicerNext)
 
 [connection]
 # IP-Adresse des Druckers im lokalen Netzwerk
@@ -29,6 +31,65 @@ default_ams_slot = auto
 # Auto-Leveling vor jedem Druck (1 = an, 0 = aus)
 auto_leveling    = 1
 
+# Kamera-Stream bei Druckstart automatisch einschalten (1 = an, 0 = aus)
+camera_on_print  = 0
+
+# Warnung vor Druck von Web-Uploads (1 = an, 0 = aus)
+web_upload_warning = 1
+
 [bridge]
 # Poll-Intervall in Sekunden
 poll_interval    = 3
+
+# ─── Multi-Printer (optional) ──────────────────────────────────────────────────
+# Mehrere Drucker können als [printer_1], [printer_2], … definiert werden.
+# Jede Bridge-Instanz verbindet sich mit einem Drucker (je eigener Port).
+# bridge_url zeigt auf die jeweilige Bridge-Instanz (für den /kx/printers-Endpunkt).
+# Die [connection]-Sektion wird weiterhin als Fallback für diese Instanz verwendet.
+#
+# Beispiel:
+# [printer_1]
+# name         = Kobra X Links
+# bridge_url   = http://192.168.178.95:7125
+# printer_ip   = 192.168.178.95
+# mqtt_port    = 9883
+# username     = userXXXXXXXXXX
+# password     = XXXXXXXXXXXXXXX
+# device_id    = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+# mode_id      = 20030
+#
+# [printer_2]
+# name         = Kobra X Rechts
+# bridge_url   = http://192.168.178.96:7125
+# printer_ip   = 192.168.178.96
+# mqtt_port    = 9883
+# username     = userYYYYYYYYYY
+# password     = YYYYYYYYYYYYYYY
+# device_id    = yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
+# mode_id      = 20030
+
+[ace_dry_presets]
+# Vordefinierte Dry-Set Presets (Temp in °C, Dauer in Sekunden)
+pla_temp = 45
+pla_duration_sec = 14400
+pla_plus_temp = 45
+pla_plus_duration_sec = 14400
+petg_temp = 50
+petg_duration_sec = 14400
+tpu_temp = 55
+tpu_duration_sec = 14400
+abs_asa_temp = 45
+abs_asa_duration_sec = 28800
+pa_pc_temp = 55
+pa_pc_duration_sec = 43200
+
+# Custom Presets (Name + Temp + Dauer)
+custom_1_name = Custom 1
+custom_1_temp = 45
+custom_1_duration_sec = 14400
+custom_2_name = Custom 2
+custom_2_temp = 45
+custom_2_duration_sec = 14400
+custom_3_name = Custom 3
+custom_3_temp = 45
+custom_3_duration_sec = 14400

config_loader.py

@@ -60,6 +60,7 @@ def _load_config_file(path: pathlib.Path):
         "DEFAULT_AMS_SLOT":     (CONFIG_SECTION_PRINT,   "default_ams_slot"),
         "AUTO_LEVELING":        (CONFIG_SECTION_PRINT,   "auto_leveling"),
         "CAMERA_ON_PRINT":      (CONFIG_SECTION_PRINT,   "camera_on_print"),
+        "WEB_UPLOAD_WARNING":   (CONFIG_SECTION_PRINT,   "web_upload_warning"),
         "BRIDGE_PRINTER_NAME":  (CONFIG_SECTION_BRIDGE,  "printer_name"),
     }
     for env_key, (section, option) in mapping.items():
@@ -97,6 +98,7 @@ def migrate_env_to_config(env_path: pathlib.Path, config_path: pathlib.Path):
         "default_ams_slot": env_vals.get("DEFAULT_AMS_SLOT", "auto"),
         "auto_leveling":    env_vals.get("AUTO_LEVELING",    "1"),
         "camera_on_print":  env_vals.get("CAMERA_ON_PRINT",  "0"),
+        "web_upload_warning": env_vals.get("WEB_UPLOAD_WARNING", "1"),
     }
     cfg[CONFIG_SECTION_BRIDGE] = {
         "poll_interval": "3",
@@ -164,6 +166,84 @@ def list_printers() -> list[dict]:
     return printers
 
 
+def list_filament_profiles() -> dict[int, dict]:
+    """Liest die [filament_profiles]-Sektion aus config.ini.
+
+    Format pro AMS-Slot — primärer Selector ist (vendor, name), die `id` wird
+    aus der orca_filaments.json beim Speichern nachgeschlagen und mitgeführt
+    (als Hint für OrcaSlicer; das Orca-Datenmodell hat ~136 Profile mit
+    derselben filament_id wie 'OGFL99', d.h. die ID ist nicht eindeutig):
+
+      [filament_profiles]
+      slot_0_vendor = Polymaker
+      slot_0_name   = PolyTerra PLA
+      slot_0_id     = OGFL01
+
+    Gibt einen Dict {slot_index: {"id": ..., "vendor": ..., "name": ...}}
+    zurück. Leere/fehlende Slots werden NICHT aufgenommen — das Default-Mapping
+    (per filament_type) in der Bridge bleibt dann aktiv.
+
+    Backwards-Kompat: alte Configs mit nur (vendor, id) bleiben lesbar; `name`
+    fehlt dann und der Aufrufer kann optional aus der orca_filaments.json
+    rekonstruieren.
+    """
+    path = _find_config_file()
+    if not path:
+        return {}
+    cfg = configparser.ConfigParser()
+    cfg.read(path, encoding="utf-8")
+    if not cfg.has_section("filament_profiles"):
+        return {}
+    result: dict[int, dict] = {}
+    for key, value in cfg.items("filament_profiles"):
+        # Erwartet: slot_<idx>_id oder slot_<idx>_vendor oder slot_<idx>_name
+        if not key.startswith("slot_"):
+            continue
+        parts = key.split("_", 2)
+        if len(parts) < 3:
+            continue
+        try:
+            slot_idx = int(parts[1])
+        except ValueError:
+            continue
+        field = parts[2]
+        if field not in ("id", "vendor", "name"):
+            continue
+        if not value.strip():
+            continue
+        result.setdefault(slot_idx, {})[field] = value.strip()
+    return result
+
+
+def save_filament_profiles(profiles: dict[int, dict]) -> bool:
+    """Schreibt die übergebenen Slot-Profile in die [filament_profiles]-
+    Sektion der config.ini. Existierende Einträge werden komplett ersetzt.
+
+    profiles: {slot_index: {"id": "OGFL01", "vendor": "Polymaker", "name": "PolyTerra PLA"}}
+    Mindestens vendor+name müssen gesetzt sein; id ist optional (Hint).
+    """
+    path = _find_config_file()
+    if not path:
+        return False
+    cfg = configparser.ConfigParser()
+    cfg.read(path, encoding="utf-8")
+    if cfg.has_section("filament_profiles"):
+        cfg.remove_section("filament_profiles")
+    if profiles:
+        cfg["filament_profiles"] = {}
+        for slot_idx in sorted(profiles.keys()):
+            entry = profiles[slot_idx] or {}
+            if entry.get("vendor"):
+                cfg["filament_profiles"][f"slot_{slot_idx}_vendor"] = entry["vendor"]
+            if entry.get("name"):
+                cfg["filament_profiles"][f"slot_{slot_idx}_name"] = entry["name"]
+            if entry.get("id"):
+                cfg["filament_profiles"][f"slot_{slot_idx}_id"] = entry["id"]
+    with open(path, "w", encoding="utf-8") as f:
+        cfg.write(f)
+    return True
+
+
 def get(key: str, default: str = "") -> str:
     return os.environ.get(key, default)
 
@@ -178,3 +258,4 @@ DEVICE_ID        = get("DEVICE_ID",        "")
 DEFAULT_AMS_SLOT = get("DEFAULT_AMS_SLOT", "auto")
 AUTO_LEVELING    = int(get("AUTO_LEVELING","1"))
 CAMERA_ON_PRINT  = int(get("CAMERA_ON_PRINT","0"))
+WEB_UPLOAD_WARNING = int(get("WEB_UPLOAD_WARNING", "1"))

docker-compose.yml

@@ -1,7 +1,9 @@
 services:
   kx-bridge:
-    image: kx-bridge:latest
-    build: .
+    image: gitea.it-drui.de/viewit/kx-bridge:latest
+    # Selbst bauen statt das Registry-Image zu pullen?
+    # Dann image-Zeile auskommentieren und folgende aktivieren:
+    # build: .
     volumes:
       - ./config:/app/config
       - ./data:/app/data

kobrax_client.py

@@ -179,10 +179,24 @@ class KobraXClient:
     def connect(self):
         self._do_connect()
         self._running = True
-        t = threading.Thread(target=self._read_loop, daemon=True)
-        t.start()
+        self._ensure_reader()
         time.sleep(0.3)
 
+    def _ensure_reader(self):
+        """Stellt sicher dass der Reader-Thread lebt. Wenn der Reader nach einer
+        früheren disconnect/reconnect-Sequenz oder einem unbehandelten Fehler
+        gestorben ist, würden empfangene Replies sonst nie ankommen — publish()
+        würde dann zwar senden, aber auf Antworten ewig warten."""
+        if not self._running:
+            return  # gewollter disconnect
+        t = getattr(self, "_reader_thread", None)
+        if t is not None and t.is_alive():
+            return
+        self._reader_thread = threading.Thread(
+            target=self._read_loop, daemon=True, name="kobrax-mqtt-reader",
+        )
+        self._reader_thread.start()
+
     def disconnect(self):
         self._running = False
         try:
@@ -191,20 +205,34 @@ class KobraXClient:
             pass
 
     def _reconnect(self):
+        """Persistenter Reconnect: versucht endlos weiter bis der Drucker wieder
+        antwortet oder disconnect() gerufen wurde. Backoff cappt bei 60 s. Die
+        ersten 5 Versuche loggen als WARNING (akute Verbindungsstörung), danach
+        nur DEBUG um Log-Spam bei langem Drucker-Ausfall (z.B. über Nacht
+        ausgeschaltet) zu vermeiden."""
         log.warning("Verbindung verloren – reconnect…")
         try:
             self._sock.close()
         except Exception:
             pass
-        for delay in [2, 4, 8, 15, 30]:
+        delays = [2, 4, 8, 15, 30, 60]
+        attempt = 0
+        while self._running:
+            delay = delays[min(attempt, len(delays) - 1)]
             try:
                 self._do_connect()
-                log.info("Reconnect erfolgreich")
+                log.info("Reconnect erfolgreich (nach %d Versuchen)", attempt + 1)
                 return True
             except Exception as e:
-                log.warning("Reconnect fehlgeschlagen (%s), warte %ss…", e, delay)
-                time.sleep(delay)
-        return False
+                attempt += 1
+                lvl = log.warning if attempt <= 5 else log.debug
+                lvl("Reconnect fehlgeschlagen (%s, Versuch %d), warte %ss…", e, attempt, delay)
+                # Geteiltes Sleep damit disconnect() den Loop schneller bricht.
+                slept = 0.0
+                while slept < delay and self._running:
+                    time.sleep(min(0.5, delay - slept))
+                    slept += 0.5
+        return False  # nur wenn disconnect() gerufen wurde
 
     def _subscribe(self, topic: str):
         with self._lock:
@@ -348,6 +376,9 @@ class KobraXClient:
     # -- Publish + request/response ------------------------------------------
 
     def publish(self, msg_type: str, action: str, data=None, timeout: float = 5.0) -> dict | None:
+        # Falls Reader-Thread aus historischen Gründen tot ist, wiederbeleben —
+        # sonst würden Replies nie ankommen und event.wait() läuft ins Timeout.
+        self._ensure_reader()
         msgid   = str(uuid.uuid4())
         payload = json.dumps({
             "type":      msg_type,
@@ -413,6 +444,7 @@ class KobraXClient:
 
     def publish_web(self, msg_type: str, action: str, data=None) -> None:
         """Fire-and-forget publish on the web/printer topic (used for runtime updates during print)."""
+        self._ensure_reader()
         msgid   = str(uuid.uuid4())
         payload = json.dumps({
             "type":      msg_type,
@@ -429,7 +461,14 @@ class KobraXClient:
             with self._lock:
                 self._sock.sendall(_build_publish(topic, payload))
         except Exception as e:
-            log.error("web send error: %s", e)
+            log.error("web send error: %s, reconnecting…", e)
+            # Reconnect triggern (analog zu publish()); ohne Retry weil
+            # fire-and-forget — der nächste Aufruf wird auf den frischen Socket
+            # treffen.
+            try:
+                self._reconnect()
+            except Exception:
+                pass
 
     # -- High-level commands -------------------------------------------------
 
@@ -545,9 +584,15 @@ class KobraXClient:
             f"Connection: close\r\n\r\n"
         ).encode()
 
-        sock = socket.create_connection((self.host, 18910), timeout=30)
+        # Connect-Timeout kurz (LAN). Während sendall() darf der Socket so
+        # lange brauchen wie nötig — bei großen Dateien (>100 MB) und
+        # langsamerem WLAN am Drucker dauert das Schieben sonst >30 s und
+        # würde den Connect-Timeout fälschlich auslösen. Read-Timeout danach
+        # generös (Drucker verarbeitet die Datei bevor er antwortet).
+        sock = socket.create_connection((self.host, 18910), timeout=10)
+        sock.settimeout(None)  # blocking während Send
         sock.sendall(headers + body)
-        sock.settimeout(120)  # große GCode-Dateien brauchen Zeit bis der Drucker antwortet
+        sock.settimeout(180)
         response = b""
         try:
             while True:

kx-bridge.spec

@@ -6,7 +6,7 @@
 # ein → zur Laufzeit über sys._MEIPASS lesbar (_WEB_BASE in der Bridge).
 from PyInstaller.utils.hooks import collect_all
 
-datas = [("web", "web")]
+datas = [("web", "web"), ("data", "static")]  # bridge/data/ → static/ im _MEIPASS
 binaries = []
 hiddenimports = []
 

web/themes/default/index.html

@@ -32,7 +32,15 @@
   <span id="h-version" style="font-size:11px;opacity:.5;margin-left:6px"></span>
   <div class="hbadge" id="h-badge"><span class="dot"></span><span id="h-state">Standby</span></div>
   <button class="theme-btn" onclick="toggleTheme()">☀ / ☾</button>
-  <button class="theme-btn" onclick="toggleLang()" id="lang-btn">EN</button>
+  <div style="display:flex;align-items:center;gap:6px">
+    <span aria-hidden="true" style="font-size:15px;line-height:1;opacity:.85">🌐</span>
+    <select class="theme-btn" id="lang-select" onchange="setLanguageFromSelect()" style="padding:6px 10px">
+      <option value="de">Deutsch</option>
+      <option value="en">English</option>
+      <option value="es">Espanol</option>
+      <option value="zh-cn">中文(简体)</option>
+    </select>
+  </div>
   <button class="theme-btn" onclick="openSettings()" id="settings-btn" title="Einstellungen">⚙</button>
   <button class="conn-btn disconnected" id="conn-btn" onclick="toggleConnection()">⚡ Verbinden</button>
 </header>
@@ -98,6 +106,10 @@
         <input type="checkbox" id="s-camera-on-print" style="width:auto;margin:0">
         <label id="lbl-camera-on-print" style="margin:0;cursor:pointer" for="s-camera-on-print">Kamera bei Druckstart einschalten</label>
       </div>
+      <div class="modal-field" style="flex-direction:row;align-items:center;gap:10px">
+        <input type="checkbox" id="s-web-upload-warning" style="width:auto;margin:0">
+        <label id="lbl-web-upload-warning" style="margin:0;cursor:pointer" for="s-web-upload-warning">Warnung bei Web-Upload-Druck anzeigen</label>
+      </div>
     </div>
 
     <div>
@@ -150,6 +162,15 @@
         oninput="highlightMatBtn(this.value)"
         style="margin-top:8px;width:100%;padding:6px 10px;background:var(--raised);border:1px solid var(--border);border-radius:6px;color:var(--txt);font-size:13px;box-sizing:border-box">
     </div>
+    <!-- Orca-Filament-Profil-Override (für AMS-Sync) -->
+    <div style="margin-bottom:20px">
+      <div style="font-size:11px;color:var(--txt2);margin-bottom:6px" id="lbl-slot-profile"></div>
+      <select id="slot-edit-profile"
+        style="width:100%;padding:6px 10px;background:var(--raised);border:1px solid var(--border);border-radius:6px;color:var(--txt);font-size:13px;box-sizing:border-box">
+        <option value="" id="slot-profile-default-opt"></option>
+      </select>
+      <div style="font-size:11px;color:var(--txt2);margin-top:4px" id="slot-profile-hint"></div>
+    </div>
     <button class="btn" id="btn-slot-edit-feed" style="width:100%;margin-bottom:8px" onclick="slotEditFeed()"></button>
     <button class="modal-save" id="btn-slot-edit-save" onclick="saveSlotEdit()"></button>
   </div>
@@ -222,9 +243,8 @@
             </div>
           </div>
           <div class="fname" id="d-fname" title="" style="margin-top:6px">–</div>
-          <div class="ctrl-btns" id="d-ctrl-btns" style="margin-top:12px">
-            <button class="btn btn-pause btn-sm" id="d-btn-pause" onclick="printAction('pause')">⏸ Pause</button>
-            <button class="btn btn-resume btn-sm" id="d-btn-resume" onclick="printAction('resume')">▶ Weiter</button>
+          <div class="ctrl-btns" id="d-ctrl-btns" style="margin-top:12px;display:none">
+            <button class="btn btn-pause btn-sm" id="d-btn-pause" onclick="togglePauseResume()">⏸ Pause</button>
             <button class="btn btn-skip btn-sm" id="d-btn-skip" onclick="openSkipDialog()" style="display:none">✂ <span id="d-btn-skip-label">Objekte</span></button>
             <button class="btn btn-cancel btn-sm" id="d-btn-cancel" onclick="confirmCancel()">✕ Stopp</button>
           </div>
@@ -235,7 +255,7 @@
           <div class="card-title"><span>⊙</span> <span id="d-card-temps">Temperaturen</span></div>
           <div class="temp-card-inner">
             <div class="temp-block">
-              <div class="temp-label">Nozzle</div>
+              <div class="temp-label" id="d-lbl-nozzle">Nozzle</div>
               <div class="temp-row">
                 <div class="temp-val" id="d-nt">–</div>
                 <div class="temp-unit">°C</div>
@@ -400,6 +420,16 @@
             <option value="duration_asc" id="ss-dur">⏱ Druckzeit</option>
           </select>
         </div>
+        <div id="store-upload-zone" onclick="document.getElementById('store-upload-input').click()"
+          ondragover="event.preventDefault();this.classList.add('drag-over')"
+          ondragleave="this.classList.remove('drag-over')"
+          ondrop="event.preventDefault();this.classList.remove('drag-over');uploadGcode(event.dataTransfer.files[0])">
+          <input type="file" id="store-upload-input" accept=".gcode,.bgcode"
+            style="display:none" onchange="uploadGcode(this.files[0]);this.value=''">
+          <span id="store-upload-icon">⬆</span>
+          <span id="store-upload-label"><span id="store-upload-label-prefix">GCode hierher ziehen oder </span><u id="store-upload-label-browse">durchsuchen</u></span>
+          <span id="store-upload-status" style="display:none"></span>
+        </div>
         <div id="store-empty" style="display:none;color:var(--txt2);text-align:center;padding:40px 0;font-size:14px">
         </div>
         <div id="store-grid" style="display:grid;grid-template-columns:repeat(auto-fill,minmax(200px,1fr));gap:14px"></div>
@@ -451,6 +481,22 @@
 </nav>
 
 
+<!-- Web-Upload-Verify-Dialog -->
+<div class="modal-overlay" id="store-web-verify-dialog" onclick="if(event.target===this)closeStoreWebVerifyDialog()">
+  <div class="modal-box" style="max-width:420px;width:100%">
+    <div class="modal-header" style="margin-bottom:14px">
+      <span class="modal-title" id="store-web-verify-title">Datei verifizieren</span>
+      <button onclick="closeStoreWebVerifyDialog()" style="background:none;border:none;font-size:18px;cursor:pointer;color:var(--txt2)">✕</button>
+    </div>
+    <p id="store-web-verify-msg" style="font-size:13px;color:var(--txt);margin-bottom:12px">Bitte bestätige, dass diese Datei für den Anycubic Kobra X erstellt wurde.</p>
+    <div id="store-web-verify-status" style="font-size:12px;color:var(--txt2);min-height:16px;margin-bottom:8px"></div>
+    <div style="display:flex;gap:8px;justify-content:flex-end">
+      <button id="store-web-verify-abort" onclick="closeStoreWebVerifyDialog()" style="padding:8px 16px;background:var(--raised);border:1px solid var(--border);border-radius:8px;color:var(--txt);cursor:pointer">Abbrechen</button>
+      <button id="store-web-verify-confirm" onclick="confirmStoreWebVerify()" style="padding:8px 18px;background:var(--accent);color:#fff;border:none;border-radius:8px;cursor:pointer;font-weight:600">Bestätigen</button>
+    </div>
+  </div>
+</div>
+
 <!-- Filament-Slot-Dialog -->
 <div class="modal-overlay" id="filament-dialog" onclick="if(event.target===this)closeFilamentDialog()">
   <div class="modal-box" style="max-width:380px;width:100%">
@@ -484,7 +530,7 @@
     <input type="text" id="apd-name" placeholder="z.B. Kobra X Wohnzimmer" style="width:100%;box-sizing:border-box;padding:8px;background:var(--raised);border:1px solid var(--border);border-radius:6px;color:var(--txt);margin-bottom:6px">
     <div id="apd-status" style="font-size:12px;margin:8px 0;min-height:16px;color:var(--txt2)"></div>
     <div style="display:flex;gap:8px;justify-content:flex-end">
-      <button onclick="closeAddPrinterDialog()" style="padding:8px 16px;background:var(--raised);border:1px solid var(--border);border-radius:8px;color:var(--txt);cursor:pointer">Abbrechen</button>
+      <button id="apd-cancel" onclick="closeAddPrinterDialog()" style="padding:8px 16px;background:var(--raised);border:1px solid var(--border);border-radius:8px;color:var(--txt);cursor:pointer">Abbrechen</button>
       <button id="apd-confirm" onclick="confirmAddPrinter()" style="padding:8px 18px;background:var(--accent);color:#fff;border:none;border-radius:8px;cursor:pointer;font-weight:600">Hinzufügen</button>
     </div>
   </div>

web/themes/default/style.css

@@ -212,6 +212,22 @@ canvas.tchart{width:100%;height:60px;display:block;border-radius:6px;background:
 .panel{display:none}
 .panel.active{display:block}
 
+/* ── FILE BROWSER UPLOAD ZONE ── */
+#store-upload-zone{
+  display:flex;flex-direction:column;align-items:center;justify-content:center;
+  gap:6px;padding:18px 12px;margin-bottom:14px;
+  border:2px dashed var(--border);border-radius:10px;
+  background:var(--raised);color:var(--txt2);
+  cursor:pointer;transition:border-color .15s,background .15s;
+  font-size:13px;text-align:center;user-select:none;
+}
+#store-upload-zone:hover{border-color:var(--accent);background:rgba(0,200,255,.06);color:var(--txt)}
+#store-upload-zone.drag-over{border-color:var(--accent);background:rgba(0,200,255,.12);color:var(--accent)}
+#store-upload-icon{font-size:22px;line-height:1}
+.upload-status-busy{color:var(--txt2)}
+.upload-status-ok{color:var(--ok)}
+.upload-status-err{color:var(--err)}
+
 /* ── MODAL ── */
 .modal-overlay{display:none;position:fixed;inset:0;background:rgba(0,0,0,.6);
   z-index:200;align-items:center;justify-content:center;padding:16px}

web/translations/de.json

@@ -0,0 +1,234 @@
+{
+  "header_status_standby": "Bereit",
+  "header_status_printing": "Druckt",
+  "header_status_complete": "Fertig",
+  "header_status_error": "Fehler",
+  "kobra_free": "Bereit",
+  "kobra_busy": "Beschäftigt",
+  "kobra_printing": "Druckt",
+  "kobra_preheating": "Aufheizen",
+  "kobra_auto_leveling": "Nivellierung",
+  "kobra_checking": "Prüfung",
+  "kobra_updated": "Aktualisierung",
+  "kobra_init": "Initialisierung",
+  "kobra_pausing": "Pausiert...",
+  "kobra_paused": "Pausiert",
+  "kobra_resuming": "Fortsetzen...",
+  "kobra_resumed": "Fortgesetzt",
+  "kobra_stopping": "Stoppt...",
+  "kobra_stoped": "Gestoppt",
+  "kobra_finished": "Abgeschlossen",
+  "kobra_failed": "Fehler",
+  "kobra_canceled": "Abgebrochen",
+  "kobra_offline": "Offline",
+  "nav_dashboard": "Dashboard",
+  "nav_print": "Druck",
+  "nav_temps": "Temperaturen",
+  "nav_motion": "Achsen",
+  "nav_ams": "AMS",
+  "nav_extras": "Licht / Lüfter",
+  "nav_console": "Konsole",
+  "card_progress": "Fortschritt",
+  "card_temps": "Temperaturen",
+  "card_light_fan": "Lüfter",
+  "card_speed": "Druckgeschwindigkeit",
+  "card_cam": "Kamera",
+  "lbl_elapsed": "Verstrichen:",
+  "lbl_remaining": "Restzeit:",
+  "lbl_slicer_time": "Slicer-Schätzung:",
+  "lbl_layers": "Layer",
+  "speed_silent": "🐢 Leise",
+  "speed_normal": "⚡ Normal",
+  "speed_sport": "🚀 Sport",
+  "lbl_light": "💡 Licht",
+  "lbl_feed": "Einziehen",
+  "lbl_unload": "Ausziehen",
+  "card_ace_dry": "ACE Trocknung",
+  "ace_dry_dryer": "Trockner",
+  "ace_dry_status_off": "Status: Aus",
+  "ace_dry_status_on": "Status: Aktiv",
+  "ace_dry_status_remaining": "Rest",
+  "ace_dry_humidity": "Luftfeuchte",
+  "ace_dry_current_temp": "Temperatur",
+  "ace_dry_chart": "Verlauf (Temp/Feuchte)",
+  "ace_dry_temp": "Temperatur (°C)",
+  "ace_dry_duration": "Dauer (Min)",
+  "ace_dry_start": "▶ Start",
+  "ace_dry_stop": "■ Stop",
+  "ace_dry_auto_refill": "Auto-Nachschub",
+  "ace_dry_enable": "Trocknung aktivieren",
+  "ace_dry_temp_line": "Trocknungstemperatur",
+  "ace_dry_time_line": "Trocknungszeit",
+  "ace_dry_ui_pending": "(nur UI, Backend folgt)",
+  "ace_dry_dialog_title": "Trockner Temp/Zeit-Einstellungen",
+  "ace_dry_dialog_temp": "Temperatur (30-80°C)",
+  "ace_dry_dialog_time": "Restzeit (h:m:s)",
+  "ace_dry_dialog_confirm": "Bestätigen",
+  "ace_dry_dialog_cancel": "Abbrechen",
+  "ace_dry_dialog_save_restart": "Speichern & Neustart",
+  "ace_dry_dialog_custom_name": "Eigener Name",
+  "ace_dry_dialog_reset_default": "Auf Standard zurücksetzen",
+  "cam_placeholder": "📷 Kamera nicht gestartet",
+  "cam_stream_unavailable": "Stream nicht verfügbar",
+  "btn_cam_start": "▶ Kamera",
+  "btn_cam_stop": "◼ Kamera",
+  "btn_pause": "⏸ Pause",
+  "btn_resume": "▶ Weiter",
+  "btn_cancel": "✕ Stopp",
+  "label_nozzle": "Düse",
+  "label_bed": "Bett",
+  "label_fan": "🌀 Lüfter",
+  "label_light": "💡 Licht",
+  "label_on_off": "Ein / Aus",
+  "label_speed": "Geschwindigkeit",
+  "panel_print_title": "Drucksteuerung",
+  "panel_print_btn_pause": "⏸ Pause",
+  "panel_print_btn_resume": "▶ Fortsetzen",
+  "panel_print_btn_cancel": "✕ Abbrechen",
+  "panel_print_temps_live": "Temperaturen (Live)",
+  "label_set": "Setzen",
+  "label_off": "Aus",
+  "panel_temps_nozzle": "Düse",
+  "panel_temps_bed": "Heizbett",
+  "panel_temps_chart": "Verlauf (letzte 60 Messungen)",
+  "label_target_c": "Ziel:",
+  "panel_motion_xy": "XY-Achsen",
+  "panel_motion_z": "Z-Achse",
+  "label_step": "Schrittweite:",
+  "btn_home_z": "Home Z",
+  "btn_home_xy": "Home XY",
+  "btn_home_all": "Home All",
+  "btn_disable_motors": "Motoren aus",
+  "panel_ams_title": "Filament",
+  "card_ams": "Filament",
+  "ams_no_data": "Keine AMS-Daten empfangen",
+  "label_slot": "Slot",
+  "ams_empty": "Leer",
+  "panel_extras_light": "Licht",
+  "panel_extras_fan": "Lüfter",
+  "panel_extras_camera": "Kamera",
+  "btn_cam_start2": "▶ Start",
+  "btn_cam_stop2": "◼ Stop",
+  "panel_console_title": "Ereignis-Log",
+  "log_light_on": "Licht an",
+  "log_light_off": "Licht aus",
+  "log_fan": "Lüfter →",
+  "log_nozzle": "Düse →",
+  "log_bed": "Bett →",
+  "log_axis": "Achse",
+  "log_home": "Home",
+  "log_home_all": "Home All",
+  "log_cam_start": "Kamera gestartet:",
+  "log_cam_stop": "Kamera gestoppt",
+  "log_poll_error": "Poll-Fehler:",
+  "log_error": "Fehler:",
+  "confirm_cancel": "Druck wirklich abbrechen?",
+  "settings_title": "Einstellungen",
+  "settings_connection": "Verbindung",
+  "settings_print": "Druckeinstellungen",
+  "settings_poll": "Poll-Intervall",
+  "settings_version": "Version",
+  "settings_save": "Speichern & Neustart",
+  "settings_printer_name": "Drucker-Name",
+  "settings_printer_ip": "Drucker-IP",
+  "settings_mqtt_port": "MQTT-Port",
+  "settings_username": "MQTT-Benutzername",
+  "settings_password": "MQTT-Passwort",
+  "settings_device_id": "Device-ID",
+  "settings_mode_id": "Mode-ID",
+  "hint_ip_no_port": "Nur IP-Adresse, kein Port (z.B. 192.168.1.102)",
+  "settings_default_slot": "Standard-Slot (Einfarbdruck)",
+  "settings_slot_auto": "Auto (alle belegten Slots)",
+  "settings_auto_leveling": "Auto-Leveling vor Druck",
+  "settings_camera_on_print": "Kamera bei Druckstart einschalten",
+  "settings_web_upload_warning": "Warnung bei Web-Upload-Druck anzeigen",
+  "update_check": "Auf Updates prüfen",
+  "update_checking": "Prüfe...",
+  "update_available": "verfügbar",
+  "update_none": "Bereits aktuell",
+  "update_apply": "Jetzt installieren",
+  "update_applying": "Lade herunter...",
+  "update_restarting": "Starte neu...",
+  "update_error": "Fehler",
+  "btn_connect": "⚡ Verbinden",
+  "btn_disconnect": "✕ Trennen",
+  "lbl_conn_error": "Verbindungsfehler:",
+  "slot_edit_title": "Slot bearbeiten",
+  "slot_edit_color": "Farbe",
+  "slot_edit_material": "Material",
+  "slot_edit_load": "⬇ Einziehen",
+  "slot_edit_unload": "⬆ Ausziehen",
+  "slot_edit_save": "💾 Speichern",
+  "slot_edit_custom": "z.B. PLA, PETG, ABS…",
+  "slot_edit_ok": "AMS Slot",
+  "slot_edit_profile": "OrcaSlicer-Profil",
+  "slot_edit_profile_hint": "Sendet beim OrcaSlicer-Sync die konkrete Marke statt nur „Generic\"",
+  "slot_edit_profile_default": "— Generic (Default) —",
+  "log_dir_all": "Alle",
+  "log_lvl_label": "Level:",
+  "file_ready_btn": "▶ Druck starten",
+  "file_slots_btn": "🎨 Slots wählen",
+  "file_cancel_btn": "✕ Abbrechen",
+  "nav_printers": "Drucker",
+  "skip_title": "✂ Objekte überspringen",
+  "skip_hint": "Objekte abwählen, die nicht weiter gedruckt werden sollen:",
+  "skip_btn_label": "Objekte",
+  "skip_no_objects": "Keine Objekte in diesem Druck.",
+  "skip_already": "übersprungen",
+  "skip_select_at_least_one": "Bitte mindestens ein Objekt wählen.",
+  "skip_sending": "Sende …",
+  "skip_success": "Objekte werden übersprungen.",
+  "fd_objects_hint": "Objekte überspringen (optional):",
+  "fd_slots_hint": "GCode-Kanal → AMS-Slot zuweisen:",
+  "fd_cancel": "Abbrechen",
+  "fd_print": "▶ Drucken",
+  "fd_no_slots_msg": "Keine belegten AMS-Slots.{br}Druck trotzdem starten?",
+  "fd_slot": "Slot",
+  "fd_no_matching_material": "Kein passendes Material",
+  "fd_used": "BELEGT",
+  "add_printer": "Drucker hinzufügen",
+  "apd_lbl_ip": "Drucker-IP",
+  "apd_lbl_name": "Name (optional)",
+  "apd_placeholder_name": "z.B. Kobra X Wohnzimmer",
+  "apd_cancel": "Abbrechen",
+  "apd_confirm": "Hinzufügen",
+  "apd_fetching": "Hole Daten vom Drucker…",
+  "apd_success": "Drucker hinzugefügt, Bridge startet neu…",
+  "apd_err_ip": "Bitte IP-Adresse eingeben",
+  "printers_remove": "Drucker entfernen",
+  "printers_remove_confirm": "Drucker \"{name}\" entfernen? Die Bridge startet neu.",
+  "printers_active": "● aktiv",
+  "printers_switch": "Wechseln →",
+  "printers_current": "Aktueller Drucker",
+  "printers_loading": "Lade…",
+  "printers_none": "Keine Drucker konfiguriert.",
+  "printers_empty_hint": "Noch kein Drucker eingerichtet.",
+  "nav_browser": "Browser",
+  "panel_browser_title": "Datei-Browser",
+  "store_search_placeholder": "🔍 Suche…",
+  "store_empty": "Noch keine Dateien hochgeladen.",
+  "store_refresh": "↻ Aktualisieren",
+  "store_print": "▶ Drucken",
+  "store_download": "⬇ Download",
+  "store_delete_confirm": "Datei löschen?",
+  "store_print_confirm": "Datei drucken?",
+  "store_web_verify_title": "Datei verifizieren",
+  "store_web_verify_msg": "Bitte bestätige, dass diese Datei für den Anycubic Kobra X erstellt wurde.",
+  "store_web_verify_confirm": "Bestätigen",
+  "store_web_verify_abort": "Abbrechen",
+  "store_no_results": "Keine Dateien gefunden.",
+  "store_never": "noch nicht gedruckt",
+  "store_estimate": "Schätzung",
+  "store_upload_label_prefix": "GCode hierher ziehen oder ",
+  "store_upload_label_browse": "durchsuchen",
+  "store_upload_busy": "⏳ Hochladen…",
+  "store_upload_success": "✓ {file}",
+  "store_upload_error": "✗ {error}",
+  "sf_all": "Alle",
+  "sf_ok": "✓ Erfolgreich",
+  "sf_err": "✗ Fehler",
+  "sf_new": "Neu",
+  "ss_date": "↓ Datum",
+  "ss_name": "A–Z Name",
+  "ss_dur": "⏱ Druckzeit"
+}

web/translations/en.json

@@ -0,0 +1,234 @@
+{
+  "header_status_standby": "Ready",
+  "header_status_printing": "Printing",
+  "header_status_complete": "Complete",
+  "header_status_error": "Error",
+  "kobra_free": "Ready",
+  "kobra_busy": "Busy",
+  "kobra_printing": "Printing",
+  "kobra_preheating": "Preheating",
+  "kobra_auto_leveling": "Auto Leveling",
+  "kobra_checking": "Checking",
+  "kobra_updated": "Updating",
+  "kobra_init": "Initializing",
+  "kobra_pausing": "Pausing...",
+  "kobra_paused": "Paused",
+  "kobra_resuming": "Resuming...",
+  "kobra_resumed": "Resumed",
+  "kobra_stopping": "Stopping...",
+  "kobra_stoped": "Stopped",
+  "kobra_finished": "Finished",
+  "kobra_failed": "Error",
+  "kobra_canceled": "Cancelled",
+  "kobra_offline": "Offline",
+  "nav_dashboard": "Dashboard",
+  "nav_print": "Print",
+  "nav_temps": "Temperatures",
+  "nav_motion": "Motion",
+  "nav_ams": "AMS",
+  "nav_extras": "Light / Fan",
+  "nav_console": "Console",
+  "card_progress": "Progress",
+  "card_temps": "Temperatures",
+  "card_light_fan": "Fan",
+  "card_speed": "Print Speed",
+  "card_cam": "Camera",
+  "lbl_elapsed": "Elapsed:",
+  "lbl_remaining": "Remaining:",
+  "lbl_slicer_time": "Slicer estimate:",
+  "lbl_layers": "Layer",
+  "speed_silent": "🐢 Silent",
+  "speed_normal": "⚡ Normal",
+  "speed_sport": "🚀 Sport",
+  "lbl_light": "💡 Light",
+  "lbl_feed": "Load",
+  "lbl_unload": "Unload",
+  "card_ace_dry": "ACE Drying",
+  "ace_dry_dryer": "Dryer",
+  "ace_dry_status_off": "Status: Off",
+  "ace_dry_status_on": "Status: Active",
+  "ace_dry_status_remaining": "Remaining",
+  "ace_dry_humidity": "Humidity",
+  "ace_dry_current_temp": "Temperature",
+  "ace_dry_chart": "History (Temp/Humidity)",
+  "ace_dry_temp": "Temperature (°C)",
+  "ace_dry_duration": "Duration (min)",
+  "ace_dry_start": "▶ Start",
+  "ace_dry_stop": "■ Stop",
+  "ace_dry_auto_refill": "Auto Refill",
+  "ace_dry_enable": "Enable Drying",
+  "ace_dry_temp_line": "Drying Temperature",
+  "ace_dry_time_line": "Drying Time",
+  "ace_dry_ui_pending": "(UI only, backend next)",
+  "ace_dry_dialog_title": "Dryer Temp/Time Settings",
+  "ace_dry_dialog_temp": "Temperature (30-80°C)",
+  "ace_dry_dialog_time": "Rem. Time (h:m:s)",
+  "ace_dry_dialog_confirm": "Confirm",
+  "ace_dry_dialog_cancel": "Cancel",
+  "ace_dry_dialog_save_restart": "Save & Restart",
+  "ace_dry_dialog_custom_name": "Custom Name",
+  "ace_dry_dialog_reset_default": "Reset to Default",
+  "cam_placeholder": "📷 Camera not started",
+  "cam_stream_unavailable": "Stream unavailable",
+  "btn_cam_start": "▶ Camera",
+  "btn_cam_stop": "◼ Camera",
+  "btn_pause": "⏸ Pause",
+  "btn_resume": "▶ Resume",
+  "btn_cancel": "✕ Stop",
+  "label_nozzle": "Nozzle",
+  "label_bed": "Bed",
+  "label_fan": "🌀 Fan",
+  "label_light": "💡 Light",
+  "label_on_off": "On / Off",
+  "label_speed": "Speed",
+  "panel_print_title": "Print Control",
+  "panel_print_btn_pause": "⏸ Pause",
+  "panel_print_btn_resume": "▶ Resume",
+  "panel_print_btn_cancel": "✕ Cancel",
+  "panel_print_temps_live": "Temperatures (Live)",
+  "label_set": "Set",
+  "label_off": "Off",
+  "panel_temps_nozzle": "Nozzle",
+  "panel_temps_bed": "Heated Bed",
+  "panel_temps_chart": "History (last 60 readings)",
+  "label_target_c": "Target:",
+  "panel_motion_xy": "XY Axes",
+  "panel_motion_z": "Z Axis",
+  "label_step": "Step size:",
+  "btn_home_z": "Home Z",
+  "btn_home_xy": "Home XY",
+  "btn_home_all": "Home All",
+  "btn_disable_motors": "Motors Off",
+  "panel_ams_title": "Filament",
+  "card_ams": "Filament",
+  "ams_no_data": "No AMS data received",
+  "label_slot": "Slot",
+  "ams_empty": "Empty",
+  "panel_extras_light": "Light",
+  "panel_extras_fan": "Fan",
+  "panel_extras_camera": "Camera",
+  "btn_cam_start2": "▶ Start",
+  "btn_cam_stop2": "◼ Stop",
+  "panel_console_title": "Event Log",
+  "log_light_on": "Light on",
+  "log_light_off": "Light off",
+  "log_fan": "Fan →",
+  "log_nozzle": "Nozzle →",
+  "log_bed": "Bed →",
+  "log_axis": "Axis",
+  "log_home": "Home",
+  "log_home_all": "Home All",
+  "log_cam_start": "Camera started:",
+  "log_cam_stop": "Camera stopped",
+  "log_poll_error": "Poll error:",
+  "log_error": "Error:",
+  "confirm_cancel": "Really cancel the print?",
+  "settings_title": "Settings",
+  "settings_connection": "Connection",
+  "settings_print": "Print Settings",
+  "settings_poll": "Poll Interval",
+  "settings_version": "Version",
+  "settings_save": "Save & Restart",
+  "settings_printer_name": "Printer Name",
+  "settings_printer_ip": "Printer IP",
+  "settings_mqtt_port": "MQTT Port",
+  "settings_username": "MQTT Username",
+  "settings_password": "MQTT Password",
+  "settings_device_id": "Device ID",
+  "settings_mode_id": "Mode ID",
+  "hint_ip_no_port": "IP address only, no port (e.g. 192.168.1.102)",
+  "settings_default_slot": "Default Slot (single color)",
+  "settings_slot_auto": "Auto (all loaded slots)",
+  "settings_auto_leveling": "Auto-Leveling before print",
+  "settings_camera_on_print": "Turn camera on at print start",
+  "settings_web_upload_warning": "Show warning when printing web uploads",
+  "update_check": "Check for Updates",
+  "update_checking": "Checking...",
+  "update_available": "available",
+  "update_none": "Already up to date",
+  "update_apply": "Install Now",
+  "update_applying": "Downloading...",
+  "update_restarting": "Restarting...",
+  "update_error": "Error",
+  "btn_connect": "⚡ Connect",
+  "btn_disconnect": "✕ Disconnect",
+  "lbl_conn_error": "Connection error:",
+  "slot_edit_title": "Edit Slot",
+  "slot_edit_color": "Color",
+  "slot_edit_material": "Material",
+  "slot_edit_load": "⬇ Load",
+  "slot_edit_unload": "⬆ Unload",
+  "slot_edit_save": "💾 Save",
+  "slot_edit_custom": "e.g. PLA, PETG, ABS…",
+  "slot_edit_ok": "AMS Slot",
+  "slot_edit_profile": "OrcaSlicer profile",
+  "slot_edit_profile_hint": "Sent on OrcaSlicer sync as the specific brand instead of just \"Generic\"",
+  "slot_edit_profile_default": "— Generic (default) —",
+  "log_dir_all": "All",
+  "log_lvl_label": "Level:",
+  "file_ready_btn": "▶ Start Print",
+  "file_slots_btn": "🎨 Select Slots",
+  "file_cancel_btn": "✕ Cancel",
+  "nav_printers": "Printers",
+  "skip_title": "✂ Skip objects",
+  "skip_hint": "Uncheck objects you no longer want to print:",
+  "skip_btn_label": "Objects",
+  "skip_no_objects": "No objects in this print.",
+  "skip_already": "skipped",
+  "skip_select_at_least_one": "Please pick at least one object.",
+  "skip_sending": "Sending …",
+  "skip_success": "Objects will be skipped.",
+  "fd_objects_hint": "Skip objects (optional):",
+  "fd_slots_hint": "Assign GCode channel to AMS slot:",
+  "fd_cancel": "Cancel",
+  "fd_print": "▶ Print",
+  "fd_no_slots_msg": "No loaded AMS slots.{br}Start print anyway?",
+  "fd_slot": "Slot",
+  "fd_no_matching_material": "No matching material",
+  "fd_used": "USED",
+  "add_printer": "Add printer",
+  "apd_lbl_ip": "Printer IP",
+  "apd_lbl_name": "Name (optional)",
+  "apd_placeholder_name": "e.g. Kobra X Living Room",
+  "apd_cancel": "Cancel",
+  "apd_confirm": "Add",
+  "apd_fetching": "Fetching data from printer…",
+  "apd_success": "Printer added, bridge restarting…",
+  "apd_err_ip": "Please enter an IP address",
+  "printers_remove": "Remove printer",
+  "printers_remove_confirm": "Remove printer \"{name}\"? The bridge will restart.",
+  "printers_active": "● active",
+  "printers_switch": "Switch →",
+  "printers_current": "Current printer",
+  "printers_loading": "Loading…",
+  "printers_none": "No printers configured.",
+  "printers_empty_hint": "No printer set up yet.",
+  "nav_browser": "Browser",
+  "panel_browser_title": "File Browser",
+  "store_search_placeholder": "🔍 Search…",
+  "store_empty": "No files uploaded yet.",
+  "store_refresh": "↻ Refresh",
+  "store_print": "▶ Print",
+  "store_download": "⬇ Download",
+  "store_delete_confirm": "Delete file?",
+  "store_print_confirm": "Print file?",
+  "store_web_verify_title": "Verify file",
+  "store_web_verify_msg": "Please verify this file was made for Anycubic Kobra X.",
+  "store_web_verify_confirm": "Confirm",
+  "store_web_verify_abort": "Abort",
+  "store_no_results": "No files found.",
+  "store_never": "never printed",
+  "store_estimate": "Estimate",
+  "store_upload_label_prefix": "Drag GCode here or ",
+  "store_upload_label_browse": "browse",
+  "store_upload_busy": "⏳ Uploading…",
+  "store_upload_success": "✓ {file}",
+  "store_upload_error": "✗ {error}",
+  "sf_all": "All",
+  "sf_ok": "✓ Completed",
+  "sf_err": "✗ Failed",
+  "sf_new": "New",
+  "ss_date": "↓ Date",
+  "ss_name": "A–Z Name",
+  "ss_dur": "⏱ Print time"
+}

web/translations/es.json

@@ -0,0 +1,234 @@
+{
+  "header_status_standby": "Listo",
+  "header_status_printing": "Imprimiendo",
+  "header_status_complete": "Completado",
+  "header_status_error": "Error",
+  "kobra_free": "Listo",
+  "kobra_busy": "Ocupado",
+  "kobra_printing": "Imprimiendo",
+  "kobra_preheating": "Precalentando",
+  "kobra_auto_leveling": "Autonivelado",
+  "kobra_checking": "Comprobando",
+  "kobra_updated": "Actualizando",
+  "kobra_init": "Inicializando",
+  "kobra_pausing": "Pausando...",
+  "kobra_paused": "Pausado",
+  "kobra_resuming": "Reanudando...",
+  "kobra_resumed": "Reanudado",
+  "kobra_stopping": "Deteniendo...",
+  "kobra_stoped": "Detenido",
+  "kobra_finished": "Finalizado",
+  "kobra_failed": "Error",
+  "kobra_canceled": "Cancelado",
+  "kobra_offline": "Desconectada",
+  "nav_dashboard": "Panel",
+  "nav_print": "Impresión",
+  "nav_temps": "Temperaturas",
+  "nav_motion": "Movimiento",
+  "nav_ams": "AMS",
+  "nav_extras": "Luz / Ventilador",
+  "nav_console": "Consola",
+  "card_progress": "Progreso",
+  "card_temps": "Temperaturas",
+  "card_light_fan": "Ventilador",
+  "card_speed": "Velocidad de impresión",
+  "card_cam": "Cámara",
+  "lbl_elapsed": "Transcurrido:",
+  "lbl_remaining": "Restante:",
+  "lbl_slicer_time": "Estimación del slicer:",
+  "lbl_layers": "Capa",
+  "speed_silent": "🐢 Silencioso",
+  "speed_normal": "⚡ Normal",
+  "speed_sport": "🚀 Sport",
+  "lbl_light": "💡 Luz",
+  "lbl_feed": "Cargar",
+  "lbl_unload": "Descargar",
+  "card_ace_dry": "Secado ACE",
+  "ace_dry_dryer": "Secador",
+  "ace_dry_status_off": "Estado: Apagado",
+  "ace_dry_status_on": "Estado: Activo",
+  "ace_dry_status_remaining": "Restante",
+  "ace_dry_humidity": "Humedad",
+  "ace_dry_current_temp": "Temperatura",
+  "ace_dry_chart": "Historial (Temp/Humedad)",
+  "ace_dry_temp": "Temperatura (°C)",
+  "ace_dry_duration": "Duración (min)",
+  "ace_dry_start": "▶ Iniciar",
+  "ace_dry_stop": "■ Parar",
+  "ace_dry_auto_refill": "Relleno automático",
+  "ace_dry_enable": "Activar secado",
+  "ace_dry_temp_line": "Temperatura de secado",
+  "ace_dry_time_line": "Tiempo de secado",
+  "ace_dry_ui_pending": "(solo UI, backend después)",
+  "ace_dry_dialog_title": "Ajustes de temp/tiempo del secador",
+  "ace_dry_dialog_temp": "Temperatura (30-80°C)",
+  "ace_dry_dialog_time": "Tiempo restante (h:m:s)",
+  "ace_dry_dialog_confirm": "Confirmar",
+  "ace_dry_dialog_cancel": "Cancelar",
+  "ace_dry_dialog_save_restart": "Guardar y reiniciar",
+  "ace_dry_dialog_custom_name": "Nombre personalizado",
+  "ace_dry_dialog_reset_default": "Restablecer valores predeterminados",
+  "cam_placeholder": "📷 Cámara no iniciada",
+  "cam_stream_unavailable": "Stream no disponible",
+  "btn_cam_start": "▶ Cámara",
+  "btn_cam_stop": "◼ Cámara",
+  "btn_pause": "⏸ Pausa",
+  "btn_resume": "▶ Reanudar",
+  "btn_cancel": "✕ Detener",
+  "label_nozzle": "Boquilla",
+  "label_bed": "Cama",
+  "label_fan": "🌀 Ventilador",
+  "label_light": "💡 Luz",
+  "label_on_off": "Encendido / Apagado",
+  "label_speed": "Velocidad",
+  "panel_print_title": "Control de impresión",
+  "panel_print_btn_pause": "⏸ Pausa",
+  "panel_print_btn_resume": "▶ Reanudar",
+  "panel_print_btn_cancel": "✕ Cancelar",
+  "panel_print_temps_live": "Temperaturas (en vivo)",
+  "label_set": "Set",
+  "label_off": "Apagado",
+  "panel_temps_nozzle": "Boquilla",
+  "panel_temps_bed": "Cama caliente",
+  "panel_temps_chart": "Historial (últimas 60 lecturas)",
+  "label_target_c": "Objetivo:",
+  "panel_motion_xy": "Ejes XY",
+  "panel_motion_z": "Eje Z",
+  "label_step": "Tamaño del paso:",
+  "btn_home_z": "Home Z",
+  "btn_home_xy": "Home XY",
+  "btn_home_all": "Home All",
+  "btn_disable_motors": "Motores apagados",
+  "panel_ams_title": "Filamento",
+  "card_ams": "Filamento",
+  "ams_no_data": "No se recibieron datos de AMS",
+  "label_slot": "Ranura",
+  "ams_empty": "Vacío",
+  "panel_extras_light": "Luz",
+  "panel_extras_fan": "Ventilador",
+  "panel_extras_camera": "Cámara",
+  "btn_cam_start2": "▶ Iniciar",
+  "btn_cam_stop2": "◼ Detener",
+  "panel_console_title": "Registro de eventos",
+  "log_light_on": "Luz encendida",
+  "log_light_off": "Luz apagada",
+  "log_fan": "Ventilador →",
+  "log_nozzle": "Boquilla →",
+  "log_bed": "Cama →",
+  "log_axis": "Eje",
+  "log_home": "Home",
+  "log_home_all": "Home All",
+  "log_cam_start": "Cámara iniciada:",
+  "log_cam_stop": "Cámara detenida",
+  "log_poll_error": "Error de sondeo:",
+  "log_error": "Error:",
+  "confirm_cancel": "¿Realmente cancelar la impresión?",
+  "settings_title": "Configuración",
+  "settings_connection": "Conexión",
+  "settings_print": "Ajustes de impresión",
+  "settings_poll": "Intervalo de sondeo",
+  "settings_version": "Versión",
+  "settings_save": "Guardar y reiniciar",
+  "settings_printer_name": "Nombre de impresora",
+  "settings_printer_ip": "IP de impresora",
+  "settings_mqtt_port": "MQTT Port",
+  "settings_username": "Usuario MQTT",
+  "settings_password": "Contraseña MQTT",
+  "settings_device_id": "ID del dispositivo",
+  "settings_mode_id": "ID de modo",
+  "hint_ip_no_port": "Solo dirección IP, sin puerto (p. ej. 192.168.1.102)",
+  "settings_default_slot": "Ranura predeterminada (un color)",
+  "settings_slot_auto": "Auto (todos los slots cargados)",
+  "settings_auto_leveling": "Autonivelado antes de imprimir",
+  "settings_camera_on_print": "Encender cámara al iniciar impresión",
+  "settings_web_upload_warning": "Mostrar advertencia al imprimir subidas web",
+  "update_check": "Buscar actualizaciones",
+  "update_checking": "Comprobando...",
+  "update_available": "disponible",
+  "update_none": "Ya actualizado",
+  "update_apply": "Instalar ahora",
+  "update_applying": "Descargando...",
+  "update_restarting": "Reiniciando...",
+  "update_error": "Error",
+  "btn_connect": "⚡ Conectar",
+  "btn_disconnect": "✕ Desconectar",
+  "lbl_conn_error": "Error de conexión:",
+  "slot_edit_title": "Editar slot",
+  "slot_edit_color": "Color",
+  "slot_edit_material": "Material",
+  "slot_edit_load": "⬇ Cargar",
+  "slot_edit_unload": "⬆ Descargar",
+  "slot_edit_save": "💾 Guardar",
+  "slot_edit_custom": "p. ej. PLA, PETG, ABS…",
+  "slot_edit_ok": "Ranura AMS",
+  "slot_edit_profile": "Perfil de OrcaSlicer",
+  "slot_edit_profile_hint": "Envía al sincronizar con OrcaSlicer la marca concreta en lugar de solo \"Generic\"",
+  "slot_edit_profile_default": "— Genérico (Predeterminado) —",
+  "log_dir_all": "Todos",
+  "log_lvl_label": "Nivel:",
+  "file_ready_btn": "▶ Iniciar impresión",
+  "file_slots_btn": "🎨 Seleccionar ranuras",
+  "file_cancel_btn": "✕ Cancelar",
+  "nav_printers": "Impresoras",
+  "skip_title": "✂ Omitir objetos",
+  "skip_hint": "Deselecciona los objetos que ya no quieras imprimir:",
+  "skip_btn_label": "Objetos",
+  "skip_no_objects": "No hay objetos en esta impresión.",
+  "skip_already": "omitido",
+  "skip_select_at_least_one": "Selecciona al menos un objeto.",
+  "skip_sending": "Enviando …",
+  "skip_success": "Se omitirán los objetos.",
+  "fd_objects_hint": "Omitir objetos (opcional):",
+  "fd_slots_hint": "Asignar canal GCode a la ranura AMS:",
+  "fd_cancel": "Cancelar",
+  "fd_print": "▶ Imprimir",
+  "fd_no_slots_msg": "No hay slots AMS cargados.{br}¿Iniciar impresión de todos modos?",
+  "fd_slot": "Ranura",
+  "fd_no_matching_material": "No hay material compatible",
+  "fd_used": "USADO",
+  "add_printer": "Añadir impresora",
+  "apd_lbl_ip": "IP de impresora",
+  "apd_lbl_name": "Nombre (opcional)",
+  "apd_placeholder_name": "p. ej. Kobra X Sala",
+  "apd_cancel": "Cancelar",
+  "apd_confirm": "Añadir",
+  "apd_fetching": "Obteniendo datos de la impresora…",
+  "apd_success": "Impresora añadida, reiniciando bridge…",
+  "apd_err_ip": "Introduce una dirección IP",
+  "printers_remove": "Eliminar impresora",
+  "printers_remove_confirm": "¿Eliminar impresora \"{name}\"? El bridge se reiniciará.",
+  "printers_active": "● activa",
+  "printers_switch": "Cambiar →",
+  "printers_current": "Impresora actual",
+  "printers_loading": "Cargando…",
+  "printers_none": "No hay impresoras configuradas.",
+  "printers_empty_hint": "Aún no hay impresora configurada.",
+  "nav_browser": "Explorador",
+  "panel_browser_title": "Explorador de archivos",
+  "store_search_placeholder": "🔍 Buscar…",
+  "store_empty": "Aún no hay archivos subidos.",
+  "store_refresh": "↻ Actualizar",
+  "store_print": "▶ Imprimir",
+  "store_download": "⬇ Descargar",
+  "store_delete_confirm": "¿Eliminar archivo?",
+  "store_print_confirm": "¿Imprimir archivo?",
+  "store_web_verify_title": "Verificar archivo",
+  "store_web_verify_msg": "Verifica que este archivo fue creado para Anycubic Kobra X.",
+  "store_web_verify_confirm": "Confirmar",
+  "store_web_verify_abort": "Abortar",
+  "store_no_results": "No se encontraron archivos.",
+  "store_never": "nunca impreso",
+  "store_estimate": "Estimación",
+  "store_upload_label_prefix": "Arrastra el GCode aquí o ",
+  "store_upload_label_browse": "buscar",
+  "store_upload_busy": "⏳ Subiendo…",
+  "store_upload_success": "✓ {file}",
+  "store_upload_error": "✗ {error}",
+  "sf_all": "Todos",
+  "sf_ok": "✓ Completado",
+  "sf_err": "✗ Fallido",
+  "sf_new": "Nuevo",
+  "ss_date": "↓ Fecha",
+  "ss_name": "A–Z Nombre",
+  "ss_dur": "⏱ Tiempo de impresión"
+}

web/translations/zh-cn.json

@@ -0,0 +1,234 @@
+{
+  "header_status_standby": "就绪",
+  "header_status_printing": "打印中",
+  "header_status_complete": "完成",
+  "header_status_error": "错误",
+  "kobra_free": "就绪",
+  "kobra_busy": "忙碌",
+  "kobra_printing": "打印中",
+  "kobra_preheating": "预热中",
+  "kobra_auto_leveling": "自动调平",
+  "kobra_checking": "检查中",
+  "kobra_updated": "更新中",
+  "kobra_init": "初始化中",
+  "kobra_pausing": "暂停中...",
+  "kobra_paused": "已暂停",
+  "kobra_resuming": "恢复中...",
+  "kobra_resumed": "已恢复",
+  "kobra_stopping": "停止中...",
+  "kobra_stoped": "已停止",
+  "kobra_finished": "已完成",
+  "kobra_failed": "错误",
+  "kobra_canceled": "已取消",
+  "kobra_offline": "离线",
+  "nav_dashboard": "仪表盘",
+  "nav_print": "打印",
+  "nav_temps": "温度",
+  "nav_motion": "运动",
+  "nav_ams": "AMS",
+  "nav_extras": "灯光 / 风扇",
+  "nav_console": "控制台",
+  "card_progress": "进度",
+  "card_temps": "温度",
+  "card_light_fan": "风扇",
+  "card_speed": "打印速度",
+  "card_cam": "相机",
+  "lbl_elapsed": "已用时间:",
+  "lbl_remaining": "剩余时间:",
+  "lbl_slicer_time": "切片预估:",
+  "lbl_layers": "层",
+  "speed_silent": "🐢 静音",
+  "speed_normal": "⚡ 标准",
+  "speed_sport": "🚀 运动",
+  "lbl_light": "💡 灯光",
+  "lbl_feed": "进料",
+  "lbl_unload": "退料",
+  "card_ace_dry": "ACE 烘干",
+  "ace_dry_dryer": "烘干机",
+  "ace_dry_status_off": "状态: 关闭",
+  "ace_dry_status_on": "状态: 运行中",
+  "ace_dry_status_remaining": "剩余",
+  "ace_dry_humidity": "湿度",
+  "ace_dry_current_temp": "温度",
+  "ace_dry_chart": "历史 (温度/湿度)",
+  "ace_dry_temp": "温度 (°C)",
+  "ace_dry_duration": "时长 (分钟)",
+  "ace_dry_start": "▶ 启动",
+  "ace_dry_stop": "■ 停止",
+  "ace_dry_auto_refill": "自动补料",
+  "ace_dry_enable": "启用烘干",
+  "ace_dry_temp_line": "烘干温度",
+  "ace_dry_time_line": "烘干时间",
+  "ace_dry_ui_pending": "(仅 UI，后端稍后支持)",
+  "ace_dry_dialog_title": "烘干温度/时间设置",
+  "ace_dry_dialog_temp": "温度 (30-80°C)",
+  "ace_dry_dialog_time": "剩余时间 (h:m:s)",
+  "ace_dry_dialog_confirm": "确认",
+  "ace_dry_dialog_cancel": "取消",
+  "ace_dry_dialog_save_restart": "保存并重启",
+  "ace_dry_dialog_custom_name": "自定义名称",
+  "ace_dry_dialog_reset_default": "恢复默认",
+  "cam_placeholder": "📷 相机未启动",
+  "cam_stream_unavailable": "视频流不可用",
+  "btn_cam_start": "▶ 相机",
+  "btn_cam_stop": "◼ 相机",
+  "btn_pause": "⏸ 暂停",
+  "btn_resume": "▶ 继续",
+  "btn_cancel": "✕ 停止",
+  "label_nozzle": "喷嘴",
+  "label_bed": "热床",
+  "label_fan": "🌀 风扇",
+  "label_light": "💡 灯光",
+  "label_on_off": "开 / 关",
+  "label_speed": "速度",
+  "panel_print_title": "打印控制",
+  "panel_print_btn_pause": "⏸ 暂停",
+  "panel_print_btn_resume": "▶ 继续",
+  "panel_print_btn_cancel": "✕ 取消",
+  "panel_print_temps_live": "温度 (实时)",
+  "label_set": "设置",
+  "label_off": "关闭",
+  "panel_temps_nozzle": "喷嘴",
+  "panel_temps_bed": "热床",
+  "panel_temps_chart": "历史 (最近 60 次读数)",
+  "label_target_c": "目标:",
+  "panel_motion_xy": "XY 轴",
+  "panel_motion_z": "Z 轴",
+  "label_step": "步进:",
+  "btn_home_z": "回零 Z",
+  "btn_home_xy": "回零 XY",
+  "btn_home_all": "全部回零",
+  "btn_disable_motors": "关闭电机",
+  "panel_ams_title": "耗材",
+  "card_ams": "耗材",
+  "ams_no_data": "未收到 AMS 数据",
+  "label_slot": "槽位",
+  "ams_empty": "空",
+  "panel_extras_light": "灯光",
+  "panel_extras_fan": "风扇",
+  "panel_extras_camera": "相机",
+  "btn_cam_start2": "▶ 启动",
+  "btn_cam_stop2": "◼ 停止",
+  "panel_console_title": "事件日志",
+  "log_light_on": "灯光已开",
+  "log_light_off": "灯光已关",
+  "log_fan": "风扇 →",
+  "log_nozzle": "喷嘴 →",
+  "log_bed": "热床 →",
+  "log_axis": "轴",
+  "log_home": "回零",
+  "log_home_all": "全部回零",
+  "log_cam_start": "相机已启动:",
+  "log_cam_stop": "相机已停止",
+  "log_poll_error": "轮询错误:",
+  "log_error": "错误:",
+  "confirm_cancel": "确定要取消打印吗?",
+  "settings_title": "设置",
+  "settings_connection": "连接",
+  "settings_print": "打印设置",
+  "settings_poll": "轮询间隔",
+  "settings_version": "版本",
+  "settings_save": "保存并重启",
+  "settings_printer_name": "打印机名称",
+  "settings_printer_ip": "打印机 IP",
+  "settings_mqtt_port": "MQTT 端口",
+  "settings_username": "MQTT 用户名",
+  "settings_password": "MQTT 密码",
+  "settings_device_id": "设备 ID",
+  "settings_mode_id": "模式 ID",
+  "hint_ip_no_port": "仅填写 IP，不要端口 (例如 192.168.1.102)",
+  "settings_default_slot": "默认槽位 (单色)",
+  "settings_slot_auto": "自动 (所有已装载槽位)",
+  "settings_auto_leveling": "打印前自动调平",
+  "settings_camera_on_print": "打印开始时开启相机",
+  "settings_web_upload_warning": "打印网页上传文件时显示警告",
+  "update_check": "检查更新",
+  "update_checking": "检查中...",
+  "update_available": "可用",
+  "update_none": "已是最新版本",
+  "update_apply": "立即安装",
+  "update_applying": "下载中...",
+  "update_restarting": "重启中...",
+  "update_error": "错误",
+  "btn_connect": "⚡ 连接",
+  "btn_disconnect": "✕ 断开",
+  "lbl_conn_error": "连接错误:",
+  "slot_edit_title": "编辑槽位",
+  "slot_edit_color": "颜色",
+  "slot_edit_material": "材料",
+  "slot_edit_load": "⬇ 进料",
+  "slot_edit_unload": "⬆ 退料",
+  "slot_edit_save": "💾 保存",
+  "slot_edit_custom": "例如 PLA, PETG, ABS…",
+  "slot_edit_ok": "AMS 槽位",
+  "slot_edit_profile": "OrcaSlicer 配置",
+  "slot_edit_profile_hint": "在 OrcaSlicer 同步时发送具体品牌，而不仅仅是“Generic”",
+  "slot_edit_profile_default": "— 通用 (默认) —",
+  "log_dir_all": "全部",
+  "log_lvl_label": "级别:",
+  "file_ready_btn": "▶ 开始打印",
+  "file_slots_btn": "🎨 选择槽位",
+  "file_cancel_btn": "✕ 取消",
+  "nav_printers": "打印机",
+  "skip_title": "✂ 跳过对象",
+  "skip_hint": "取消勾选不想继续打印的对象:",
+  "skip_btn_label": "对象",
+  "skip_no_objects": "此打印任务没有对象。",
+  "skip_already": "已跳过",
+  "skip_select_at_least_one": "请至少选择一个对象。",
+  "skip_sending": "发送中 …",
+  "skip_success": "对象将被跳过。",
+  "fd_objects_hint": "跳过对象 (可选):",
+  "fd_slots_hint": "将 GCode 通道分配到 AMS 槽位:",
+  "fd_cancel": "取消",
+  "fd_print": "▶ 打印",
+  "fd_no_slots_msg": "没有已装载的 AMS 槽位。{br}仍要开始打印吗?",
+  "fd_slot": "槽位",
+  "fd_no_matching_material": "无匹配材料",
+  "fd_used": "已用",
+  "add_printer": "添加打印机",
+  "apd_lbl_ip": "打印机 IP",
+  "apd_lbl_name": "名称 (可选)",
+  "apd_placeholder_name": "例如 Kobra X 客厅",
+  "apd_cancel": "取消",
+  "apd_confirm": "添加",
+  "apd_fetching": "正在从打印机获取数据…",
+  "apd_success": "打印机已添加，Bridge 正在重启…",
+  "apd_err_ip": "请输入 IP 地址",
+  "printers_remove": "移除打印机",
+  "printers_remove_confirm": "移除打印机 \"{name}\"? Bridge 将重启。",
+  "printers_active": "● 活动",
+  "printers_switch": "切换 →",
+  "printers_current": "当前打印机",
+  "printers_loading": "加载中…",
+  "printers_none": "未配置打印机。",
+  "printers_empty_hint": "尚未设置打印机。",
+  "nav_browser": "浏览器",
+  "panel_browser_title": "文件浏览器",
+  "store_search_placeholder": "🔍 搜索…",
+  "store_empty": "尚未上传文件。",
+  "store_refresh": "↻ 刷新",
+  "store_print": "▶ 打印",
+  "store_download": "⬇ 下载",
+  "store_delete_confirm": "删除文件?",
+  "store_print_confirm": "打印文件?",
+  "store_web_verify_title": "验证文件",
+  "store_web_verify_msg": "请确认此文件是为 Anycubic Kobra X 创建的。",
+  "store_web_verify_confirm": "确认",
+  "store_web_verify_abort": "取消",
+  "store_no_results": "未找到文件。",
+  "store_never": "从未打印",
+  "store_estimate": "估算",
+  "store_upload_label_prefix": "将 GCode 拖到这里或 ",
+  "store_upload_label_browse": "浏览",
+  "store_upload_busy": "⏳ 上传中…",
+  "store_upload_success": "✓ {file}",
+  "store_upload_error": "✗ {error}",
+  "sf_all": "全部",
+  "sf_ok": "✓ 已完成",
+  "sf_err": "✗ 失败",
+  "sf_new": "新",
+  "ss_date": "↓ 日期",
+  "ss_name": "A–Z 名称",
+  "ss_dur": "⏱ 打印时间"
+}