build: sources for v0.9.20

ACE-Dryer setDry geht jetzt fire-and-forget (timeout=0, kein Response-
Check). Drucker führt den Befehl korrekt aus, aber liefert code:0
statt code:200 — was eine 502-Fehlermeldung in der Bridge-UI auslöste
obwohl der Trockner-Toggle eigentlich funktioniert hat.

Pattern identisch zu setAutoFeed (Z.3161).

CHANGELOG.de.md

@@ -1,5 +1,178 @@
 # Changelog
 
+## [0.9.20] – 2026-06-08
+
+### Neu
+- **Französische Sprachunterstützung (PR #45 von @Nathacks)**
+- **Z-Höhe in der Print-UI (PR #49 von @Nathacks).** Zeigt die aktuelle
+  Z-Position in mm unterhalb des Layer-Zählers.
+
+### Behoben
+- **Kamera-Autostart ignorierte das "Kamera bei Druckstart einschalten"-
+  Setting nach einem Bridge-Restart (Issue #50).** Das Setting wurde in
+  der Prozessumgebung gecacht — nach dem Speichern in der UI überlebte
+  der alte Wert den Restart und der neue Wert aus `config.ini` wurde
+  nicht gelesen.
+- **Kamera startete nach manuellem Stopp während eines Drucks automatisch
+  neu (Issue #50).** Ein neues `_camera_user_stopped`-Flag unterdrückt
+  den Autostart für die aktuelle Drucksitzung. Es wird beim Druckende
+  zurückgesetzt.
+- **Falscher "Stream nicht verfügbar"-Fehler-Toast beim manuellen
+  Kamera-Stopp.** Der Bild-Fehler-Handler war noch registriert als
+  `img.src` geleert wurde.
+- **JS-Fehler (`ReferenceError: br is not defined`) beim Licht-Toggle.**
+  Variable wurde aus dem falschen Scope referenziert.
+- Webcam-URLs sind jetzt absolut, damit Mobileraker/Obico-Clients sie
+  erreichen können.
+
+## [0.9.19.1] – 2026-06-04
+
+### Behoben
+- Standalone-Binaries (Linux/Windows) zeigten `vunknown` als Version.
+  Die `VERSION`-Datei ist jetzt ins PyInstaller-Onefile eingebettet.
+- Bei fehlenden TLS-Zertifikaten (`anycubic_slicer.crt`/`.key`) gab
+  es nur den rohen Fehler `[Errno 2] No such file or directory`. Die
+  Bridge meldet jetzt klar, wo die Dateien hingelegt werden müssen
+  und dass `anycubic-certs.zip` aus dem Gitea-Release stammt.
+
+### Geändert
+- Filament-Profil-Liste neu kuratiert: 209 statt 399 Einträge.
+  Profile die nur für drucker-spezifische Vendor-Bundles existieren
+  (z.B. Eryone Thinker X400, Artillery M1 Pro, WonderMaker ZR,
+  Tiertime, Cubicon, CoLiDo, Afinia, Snapmaker) sind rausgeflogen
+  — OrcaSlicer hätte sie im Standard-Kobra-X-Setup beim Sync
+  ohnehin nicht gefunden, weil die jeweiligen Vendor-Bundles nur
+  bei aktivem Drucker-Vendor geladen werden. Für solche Filamente
+  bleibt der Custom-Profile-Import (Issue #41) der Weg.
+
+## [0.9.19] – 2026-06-02
+
+### Neu
+- **🎯 Filament-Sync mit OrcaSlicer matched jetzt das richtige Preset**
+  statt immer auf „Generic PLA" zu landen. Voraussetzung: ein
+  OrcaSlicer-Build mit dem
+  [PR #13719](https://github.com/SoftFever/OrcaSlicer/pull/13719)
+  Empfangs-Patch (im OrcaSlicer-KX-Build dabei). Die Bridge sendet pro
+  AMS-Slot jetzt `name` + `vendor_name` im Lane-Pfad UND
+  `gate_filament_name` im Happy-Hare-MMU-Pfad (OrcaSlicer wechselt bei
+  AMS-Setups automatisch auf den HH-Pfad).
+- **Eigene OrcaSlicer-Profile in die Bridge importieren (Issue #41).**
+  Settings-Tab → „OrcaSlicer-Profile" oder direkt im Slot-Edit-Dialog
+  („★ Eigene Profile importieren…") lädst du deine `.json`-Files aus
+  `~/.config/OrcaSlicer/user/<id>/filament/` hoch — einzeln oder als
+  ZIP. Erscheint dann im Slot-Dropdown unter „★ Eigene Profile" und
+  wird beim Sync an Orca als User-Match weitergegeben. Funktioniert
+  über HTTP, also auch wenn die Bridge im Docker auf Raspi/NAS läuft
+  und OrcaSlicer auf dem Desktop. Auch reine Override-Profile mit nur
+  `inherits: "Generic PLA @System"` + ein paar Tweaks werden korrekt
+  erkannt — die Bridge resolved die vererbten Felder aus dem
+  System-Parent.
+
+### Fixes
+- **AMS-Sync landete hartnäckig auf „Generic PLA":** das Orca-
+  Datenmodell hat 68 duplikate `filament_id`-Werte (`OGFL99` allein
+  136 mal), und die Bridge wählte oft eine ID die für den Kobra X
+  nicht `is_compatible` war (z.B. `GFL92` aus dem Kobra-2-Profil →
+  Orca verwarf es). Generator priorisiert jetzt Kobra-X-Varianten und
+  filtert Phantom-Profile (Cross-Vendor-Overrides) raus —
+  `orca_filaments.json` von 1035 → 400 saubere Profile.
+- **Slot ohne expliziten Override sendet jetzt `Generic <Typ>`** statt
+  einer impliziten Vendor-Annahme. Library-Generic-Profile haben
+  `compatible_printers: []` (= alle Drucker), sind also immer sichtbar
+  und matchen verlässlich.
+- **Slot-Karte zeigt den Hersteller direkt nach dem Speichern** —
+  ohne Browser-Reload. `poll()` war async, das Re-Render kam erst
+  beim nächsten Tick.
+- **ACE-Trockner-Toggle warf 502-Fehler obwohl der Trockner ein-/aus-
+  ging (PR #42 von @gangoke):** `setDry` jetzt fire-and-forget wie
+  `setAutoFeed`. Der Drucker antwortet auf diesem Push-Topic mit
+  `code: 0` statt `code: 200`, das hat die Bridge fälschlich als
+  Fehler interpretiert.
+
+### Datenmodell / API
+- `orca_filaments.json` regeneriert: nur echte Vendor-Profile und
+  OrcaFilamentLibrary-Profile bleiben drin. Bambu/Polymaker/SUNLU-
+  Library-Profile dabei, Qidi-Cross-Bundles raus.
+- Neue Endpoints: `POST /kx/filament/profiles/user` (ZIP/JSON-Upload),
+  `GET /kx/filament/profiles/user` (Liste der User-Imports),
+  `DELETE /kx/filament/profiles/user[?vendor=…&name=…]`. Persistenz
+  in `<KX_DATA_DIR>/orca_filaments.user.json` (Volume — überlebt
+  Image-Updates).
+
+### Build
+- Neues Modul `bridge/orca_filaments.py` (gemeinsame Parser-Helfer
+  für Generator und Import-Endpoint).
+- Dockerfile + release.sh um `orca_filaments.py` erweitert.
+
+## [0.9.18] – 2026-05-31
+
+### Neu
+- **🎉 Filament-Material und -Farbe pro AMS-Slot aus der Bridge an den
+  Drucker senden:** Im Slot-Edit-Dialog gewählte Werte gehen jetzt
+  tatsächlich an den Drucker und werden persistent übernommen — am
+  Drucker-Display siehst du sofort dieselbe Belegung wie in der Bridge-UI.
+  In 0.9.17 wurde der Befehl über das falsche MQTT-Topic
+  (`slicer/printer/…`) gesendet, der Drucker hat ihn stillschweigend
+  ignoriert. Jetzt geht er über `web/printer/…` wie der Anycubic
+  Slicer Next es macht (verifiziert via Live-MQTT-Sniff +
+  Workbench-Vue-Source). **Achtung:** der Drucker muss im Idle-Zustand
+  sein, und leere Slots lassen sich nicht beschriften.
+- **Mehrsprachiges UI – spanische Übersetzung von Muttersprachler
+  überarbeitet (PR #40 von @pezfisk):** fehlende Akzente
+  (impresión, cámara, después, animación, …), Begriffe vereinheitlicht
+  (Pause → Pausa, Start → Iniciar, Layer → Capa). Plus neues
+  `README.es.md` und Cross-Links in den drei READMEs.
+- **Z-Höhen-Anzeige in Obico** funktioniert jetzt. Der Drucker liefert
+  keine echte Z-Position via MQTT (per Live-Sniff bestätigt), die Bridge
+  schätzt sie aus `curr_layer × layer_height + first_layer_height`.
+  Layer-Heights kommen aus dem GCode-Header beim Upload, persistiert
+  im GCode-Store; Fallback aus dem OrcaSlicer-Default-Filename
+  (`…_0.2_…gcode`). `/server/files/metadata` liefert zusätzlich
+  `object_height` (Gesamt-Z), damit Obicos `mmProgress`-Widget
+  `aktuelles Z / Gesamt-Z` anzeigt.
+- **Slot-Karte zeigt den OrcaSlicer-Profil-Vendor** unter dem Material
+  (z.B. „PLA / Polymaker"), mit Profil-Namen + interner ID als
+  Tooltip. So ist auf einen Blick erkennbar welcher Slot-Override
+  aktiv ist.
+
+### Fixes
+- **Slot-Profil-Auswahl im AMS-Dialog (Issue #39 von @harrygeier):**
+  drei separate Bugs in 0.9.17 sorgten dafür dass die gewählte Marke
+  nach dem Speichern verschwand und beim erneuten Öffnen ein falsches
+  Material angezeigt wurde.
+  - `multiColorBox/setInfo` über das falsche MQTT-Topic — siehe oben.
+  - Speichern lief in zwei parallelen Requests (Profil-Override +
+    Material/Farbe) → Race-Bedingung. Läuft jetzt sequenziell und
+    reloaded den lokalen State bevor der Dialog geschlossen wird.
+  - OrcaSlicer-Filament-IDs sind nicht eindeutig — `orca_filaments.json`
+    hat 68 duplikate IDs, `OGFL99` allein ist 136 Vendor-Profilen
+    zugeordnet (Erkenntnis von @gangoke). Der primäre Selector ist
+    jetzt `(vendor, name)` — über alle 1002 Profile eindeutig.
+- **MQTT-Reconnect (Issue #33 von @icebear):** wurde der Drucker über
+  Nacht ausgeschaltet, schlug die Bridge nach 5 Reconnect-Versuchen
+  (~60 s gesamt) endgültig fehl — Filament-Sync ging morgens noch
+  (weil das HTTP ist), aber Print-Start scheiterte mit
+  „connection refused", User musste die Bridge selbst neu starten.
+  Reader-Thread reconnectet jetzt **endlos** (Backoff cappt bei 60 s)
+  bis der Drucker wieder antwortet, mit DEBUG-Logging nach den ersten
+  5 Versuchen damit das Log nicht über Nacht zugemüllt wird.
+- **„Unknown child pid"-Warnungen im Log:** beim Killen der Kamera-
+  `ffmpeg`-Prozesse fehlte das `wait()` — Children blieben als
+  Zombies und asyncio meldete sie alle ~20 s. Gefixt im CameraCache
+  + `/api/camera/stream`.
+
+### UI-Aufräumen
+- **Pause-Button als Toggle:** druckt der Drucker → `⏸ Pause`, ist
+  pausiert → `▶ Weiter`. Der separate „Weiter"-Button entfällt.
+- **Pause + Stopp komplett ausgeblendet wenn Drucker idle** — bei
+  Standby waren beide Buttons vorher dauerhaft sichtbar, was beim
+  Idle-Drucker verwirrend wirkte.
+
+### Build
+- **GCode-Store-Migration:** neue Spalten `layer_height` +
+  `first_layer_height` in `gcode_files` (automatisch beim ersten
+  Start von 0.9.18 angelegt).
+
 ## [0.9.17] – 2026-05-30
 
 ### Neu

CHANGELOG.md

@@ -1,5 +1,180 @@
 # Changelog
 
+## [0.9.20] – 2026-06-08
+
+### New
+- **French language support (PR #45 by @Nathacks)**
+- **Z height display in the print UI (PR #49 by @Nathacks).** Shows
+  current Z position in mm below the layer counter.
+
+### Fixed
+- **Camera auto-start ignored "Enable camera on print start" setting
+  after a bridge restart (issue #50).** The setting was cached in the
+  process environment — after saving it in the UI, the old value
+  survived the restart and the new value from `config.ini` was never
+  read.
+- **Camera restarted automatically after manual stop during a print
+  (issue #50).** A new `_camera_user_stopped` flag suppresses
+  auto-restart for the current print session. It resets when the
+  print ends.
+- **Spurious "stream unavailable" error toast when stopping the camera
+  manually.** The image error handler was still registered when
+  `img.src` was cleared.
+- **JS error (`ReferenceError: br is not defined`) when toggling the
+  light.** Variable was referenced from the wrong scope.
+- Webcam URLs are now absolute so that Mobileraker/Obico clients can
+  reach them.
+
+## [0.9.19.1] – 2026-06-04
+
+### Fixed
+- Standalone binaries (Linux/Windows) reported `vunknown` as their
+  version. The `VERSION` file is now embedded into the PyInstaller
+  onefile bundle.
+- When the TLS certificates (`anycubic_slicer.crt`/`.key`) were
+  missing, the bridge only logged the raw `[Errno 2] No such file
+  or directory`. It now states clearly where the files need to be
+  placed and that `anycubic-certs.zip` from the Gitea release is the
+  source.
+
+### Changed
+- Filament profile list re-curated: 209 entries instead of 399.
+  Profiles that only exist inside printer-specific vendor bundles
+  (e.g. Eryone Thinker X400, Artillery M1 Pro, WonderMaker ZR,
+  Tiertime, Cubicon, CoLiDo, Afinia, Snapmaker) were dropped —
+  OrcaSlicer wouldn't have found them in a default Kobra X setup
+  anyway, because the matching vendor bundle is only loaded when
+  the corresponding printer vendor is active. For those filaments
+  the custom profile import (issue #41) remains the way.
+
+## [0.9.19] – 2026-06-02
+
+### New
+- **🎯 Filament sync with OrcaSlicer now picks the right preset**
+  instead of always falling back to "Generic PLA". Requires an
+  OrcaSlicer build with the
+  [PR #13719](https://github.com/SoftFever/OrcaSlicer/pull/13719)
+  receive-side patch (included in the OrcaSlicer-KX build). The bridge
+  sends `name` + `vendor_name` per AMS slot on the lane path AND
+  `gate_filament_name` per gate on the Happy-Hare MMU path (OrcaSlicer
+  switches to the HH path automatically for AMS setups).
+- **Import your own OrcaSlicer profiles into the bridge (issue #41).**
+  Settings → "OrcaSlicer Profiles" or directly in the slot-edit dialog
+  ("★ Import own profiles…") lets you upload `.json` files from
+  `~/.config/OrcaSlicer/user/<id>/filament/` — single files or as a
+  ZIP. They show up in the slot dropdown under "★ Own profiles" and
+  are passed through to Orca on sync as user matches. Works over HTTP
+  so the bridge can run in Docker on a Raspi/NAS while OrcaSlicer
+  lives on a desktop. Override-only profiles with just
+  `inherits: "Generic PLA @System"` + a few tweaks are detected
+  correctly — the bridge resolves the inherited fields from the
+  system parent.
+
+### Fixes
+- **AMS sync stuck on "Generic PLA":** the Orca data model has 68
+  duplicate `filament_id` values (`OGFL99` alone shared by 136
+  profiles), and the bridge often picked an ID that was not
+  `is_compatible` with the Kobra X (e.g. `GFL92` from the Kobra-2
+  profile → Orca rejected it). The generator now prioritises Kobra-X
+  variants and filters out phantom profiles (cross-vendor overrides) —
+  `orca_filaments.json` dropped from 1035 to 400 clean profiles.
+- **Slot without an explicit override now sends `Generic <type>`**
+  instead of an implicit vendor guess. Library generic profiles have
+  `compatible_printers: []` (= all printers), so they are always
+  visible and match reliably.
+- **Slot card shows the vendor right after save** without a browser
+  reload. `poll()` was async, the re-render only happened on the next
+  tick.
+- **ACE dryer toggle threw a 502 even though the dryer worked
+  (PR #42 by @gangoke):** `setDry` is now fire-and-forget like
+  `setAutoFeed`. The printer answers on that push topic with
+  `code: 0` instead of `code: 200`, which the bridge wrongly treated
+  as an error.
+
+### Data model / API
+- `orca_filaments.json` regenerated: only real vendor profiles and
+  OrcaFilamentLibrary profiles. Bambu/Polymaker/SUNLU library profiles
+  in, Qidi cross-bundles out.
+- New endpoints: `POST /kx/filament/profiles/user` (ZIP/JSON upload),
+  `GET /kx/filament/profiles/user` (list user imports),
+  `DELETE /kx/filament/profiles/user[?vendor=…&name=…]`. Persisted in
+  `<KX_DATA_DIR>/orca_filaments.user.json` (volume — survives image
+  updates).
+
+### Build
+- New module `bridge/orca_filaments.py` (shared parser helpers used by
+  the generator and the import endpoint).
+- Dockerfile + release.sh updated to include `orca_filaments.py`.
+
+## [0.9.18] – 2026-05-31
+
+### New
+- **🎉 Push filament material and colour from the bridge to the
+  printer:** The values you pick in the slot-edit dialog now actually
+  reach the printer and stick — the printer display shows the same
+  slot setup as the bridge UI right away. In 0.9.17 the command was
+  sent over the wrong MQTT topic (`slicer/printer/…`) and the printer
+  silently dropped it. It now goes via `web/printer/…` like the
+  Anycubic Slicer Next does (verified by live MQTT sniff +
+  Workbench-Vue source). **Note:** the printer must be idle, and
+  empty slots can not be labelled.
+- **Spanish translation reviewed by a native speaker (PR #40 by
+  @pezfisk):** missing accents (impresión, cámara, después,
+  animación, …) and term consistency (Pause → Pausa, Start →
+  Iniciar, Layer → Capa). New `README.es.md` and cross-links between
+  the three READMEs.
+- **Z-height now shows up in Obico.** The printer does not report a
+  real Z position over MQTT (live-sniff confirmed), so the bridge
+  estimates it from `current_layer × layer_height + first_layer_height`.
+  Layer heights are parsed from the gcode header at upload time and
+  persisted in the gcode store; fallback for prints started directly
+  from the slicer is the OrcaSlicer default filename pattern
+  (`…_0.2_…gcode`). `/server/files/metadata` also serves
+  `object_height` (total Z) so Obicos `mmProgress` widget can render
+  `current Z / total Z`.
+- **Slot card shows the OrcaSlicer profile vendor** under the
+  material (e.g. `PLA / Polymaker`), with the profile name + internal
+  ID as tooltip. Lets you see at a glance which slot override is
+  active.
+
+### Fixes
+- **Slot profile picker in the AMS dialog (issue #39 by
+  @harrygeier):** three separate bugs in 0.9.17 caused the chosen
+  brand to disappear after save and a different material to show up
+  on re-open.
+  - `multiColorBox/setInfo` was sent on the wrong MQTT topic — see
+    above.
+  - Save fired two parallel requests (profile override + material/
+    colour) → race. Now sequential, and the local state is reloaded
+    before the dialog closes.
+  - OrcaSlicer filament IDs are not unique — `orca_filaments.json`
+    has 68 duplicate IDs, `OGFL99` alone is shared by 136 vendor
+    profiles (caught by @gangoke). The primary selector is now
+    `(vendor, name)` — unique across all 1002 profiles.
+- **MQTT reconnect (issue #33 by @icebear):** if the printer was
+  powered off overnight the bridge gave up after 5 reconnect attempts
+  (~60 s total) — filament sync still worked in the morning (its
+  HTTP), but starting a print failed with `connection refused` and
+  the user had to restart the bridge itself. The reader thread now
+  reconnects **forever** (backoff caps at 60 s) until the printer
+  responds again, with logs dropping to DEBUG after the first 5
+  attempts so an overnight outage does not spam the log.
+- **`Unknown child pid` warnings in the log:** the camera ffmpeg
+  helpers were killed without awaiting their `wait()` — children
+  lingered as zombies and asyncio reported them every ~20 s. Fixed
+  in CameraCache + `/api/camera/stream`.
+
+### UI polish
+- **Pause button is now a toggle:** while printing → `⏸ Pause`,
+  while paused → `▶ Resume`. The separate resume button is gone.
+- **Pause + stop hidden when the printer is idle** — both used to be
+  visible at all times, which was confusing on a standby printer.
+
+### Build
+- **gcode store migration:** new columns `layer_height` +
+  `first_layer_height` on `gcode_files` (added automatically on first
+  start of 0.9.18).
+
 ## [0.9.17] – 2026-05-30
 
 ### New

Dockerfile

@@ -2,6 +2,8 @@ FROM python:3.11-slim
 
 WORKDIR /app
 
+RUN apt-get update && apt-get install -y --no-install-recommends ffmpeg && rm -rf /var/lib/apt/lists/*
+
 COPY requirements.txt .
 RUN pip install --no-cache-dir -r requirements.txt
 
@@ -13,6 +15,7 @@ COPY data/ ./static/
 COPY config_loader.py .
 COPY env_loader.py .
 COPY kobrax_client.py .
+COPY orca_filaments.py .
 COPY VERSION .
 COPY anycubic_slicer.crt .
 COPY anycubic_slicer.key .

README.de.md

@@ -8,7 +8,12 @@
 
 Eine Moonraker-kompatible Bridge, die direkt mit dem Drucker spricht.
 
-<sub>🇬🇧 <a href="README.md">English version</a></sub>
+<sub>🧪 Ein Community-Bericht auf Reddit deutet darauf hin, dass die Bridge auch
+mit dem **Kobra S1** und **Kobra S1 Max** funktioniert — die Protokolle wirken
+kompatibel, beides ist aber weder offiziell getestet noch unterstützt.
+Feedback willkommen.</sub>
+
+<sub>🇬🇧 <a href="README.md">English version</a>  ·  🇪🇸 <a href="README.es.md">Versión española</a></sub>
 
 <br>
 
@@ -32,12 +37,17 @@ Eine Moonraker-kompatible Bridge, die direkt mit dem Drucker spricht.
 |---|---|
 | 🖨️ | **Druckersteuerung** — Start, Pause, Resume, Abbruch, Temperaturen, Druckgeschwindigkeit |
 | 📊 | **Live-Status** — Temperatur, Fortschritt, Layer, Restzeit, Kamera-Stream |
-| 🎨 | **AMS / Multicolor** — Filament-Slots, Per-Kanal-Remapping, MMU-Emulation für OrcaSlicer Filament-Sync |
+| 🎨 | **AMS / Multicolor** — Slots mit **Profil-Picker pro Slot** (eigene Marke aus OrcaSlicer-Profilen pro Slot zuweisen); Bridge schreibt Material und Farbe ans Drucker-Display zurück |
+| 📦 | **Eigene OrcaSlicer-Profile importieren** — ZIP aus `~/.config/OrcaSlicer/user/<id>/filament/` in die Bridge ziehen; tauchen im Slot-Dropdown unter ★ Eigene Profile auf |
+| 📷 | **Obico-Integration (experimentell)** — Time-Lapse und WebRTC-Livestream gegen einen selbst gehosteten [Obico-Server](https://github.com/TheSpaghettiDetective/obico-server) via moonraker-obico |
+| 📐 | **H.264-Direkt-Stream + Z-Höhe** — sparsamer Kamera-Pfad für Obico, aktuelle Z aus der Layer-Höhe abgeleitet (Mm-Progress-Widget) |
 | 🗂️ | **GCode-Browser** — hochgeladene Dateien mit Thumbnail, Druckhistorie, Suche & Filter |
 | 🧩 | **Multi-Printer** — mehrere Drucker in **einer** Bridge-Instanz, Umschalten per Dropdown |
 | ➕ | **Drucker hinzufügen per Klick** — nur die IP eingeben, Zugangsdaten werden automatisch importiert |
+| 🔁 | **Robuster MQTT-Reconnect** — Bridge überlebt nächtlichen Drucker-Reboot ohne manuellen Neustart |
+| 🌐 | **Mehrsprachiges UI** — DE / EN / ES / 中文, Browser-Sprache automatisch erkannt |
 | 🔄 | **Self-Update** — neue Versionen direkt im Browser installieren |
-| 🌐 | **OrcaSlicer** — volles Moonraker-Protokoll (HTTP + WebSocket), DE/EN UI |
+| 🧠 | **OrcaSlicer** — volles Moonraker-Protokoll (HTTP + WebSocket); für korrekten Vendor-Match pro Slot den [OrcaSlicer-KX-Build](#-empfohlener-slicer) nutzen |
 
 ---
 
@@ -103,18 +113,28 @@ Drucker → Verbindungstyp **Moonraker** → Host: `http://BRIDGE-IP:7125`
 
 ## 🎨 Empfohlener Slicer
 
-Für die beste Erfahrung mit der KX-Bridge bieten wir einen **gepatchten
+Für sauberen AMS-Filament-Sync gibt es einen **gepatchten OrcaSlicer-Build**:
-OrcaSlicer-Build**, der drei offene SoftFever/OrcaSlicer-PRs bündelt: das
-Anycubic-Kobra-X-Druckerprofil, einen Multicolor-G-Code-Fix und — am wichtigsten
-— einen Moonraker/Happy-Hare-Filament-Sync-Fix, der die AMS-Slot-Positionen auch
-bei einem leeren Slot in der Mitte korrekt beibehält.
 
 → **[OrcaSlicer-KX Releases](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/releases/latest)** (Linux AppImage + Windows ZIP)
 
-Standard-OrcaSlicer funktioniert auch; der gepatchte Build verbessert
+**Upstream-PRs im KX-Build:**
-hauptsächlich das AMS-Handling. Es ist ein Build von
+
-[OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) (AGPL-3.0); der Quellcode
+- **[PR #13372](https://github.com/SoftFever/OrcaSlicer/pull/13372)** — Moonraker / Happy-Hare AMS-Sync-Fix (Slot-Positionen bleiben auch bei leerem Slot in der Mitte korrekt)
-ist über die verlinkten PRs verfügbar.
+- **[PR #13719](https://github.com/SoftFever/OrcaSlicer/pull/13719)** — Vendor- + Name-Matching für Moonraker (liest `name` + `vendor_name` pro Slot und matched gegen deine Filament-Presets), von [@LordGuenni](https://github.com/LordGuenni)
+- **[PR #13315](https://github.com/SoftFever/OrcaSlicer/pull/13315)** — Eindeutige `filament_id` für User-Presets (neu erstellte eigene Profile bekommen eine frische ID statt das `OGFL99` vom Generic-Parent zu erben), von [@mrnoisytiger](https://github.com/mrnoisytiger)
+
+**Plus vier KX-eigene Verbesserungen on top:**
+
+- Bridge-Filament-Hint (`tray_info_idx` + Vendor) respektieren
+- Vendor-Match auch wenn das gewählte Base-Preset **nicht is_compatible** mit dem aktiven Drucker ist (so matchen Profile aus anderen Drucker-Setups trotzdem über die Marke)
+- Vendor-Match wenn `tray_info_idx` gesetzt ist, das Preset aber inkompatibel
+- Zwei-Pass-Suche: erst kompatible Presets, dann alle sichtbaren
+
+**Warum das zusammen wichtig ist:** ohne #13719 landen die AMS-Slots in OrcaSlicer alle auf `Generic PLA` / `Generic PETG`, obwohl die Bridge die konkrete Marke schon mitsendet (`name + vendor_name + gate_filament_name`). Mit dem KX-Build matched OrcaSlicer deine echten User-Presets — auch die, die du via [Eigene OrcaSlicer-Profile importieren](#-features) in die Bridge gezogen hast.
+
+Stock-Upstream-OrcaSlicer funktioniert für Slicing und Drucken weiterhin — nur das Per-Slot-Vendor-Matching beim AMS-Sync fällt dann weg. Material und Farbe pro Slot kannst du auch ohne den KX-Build über die Bridge ans Drucker-Display schreiben (das läuft über MQTT, nicht über den Slicer).
+
+OrcaSlicer-KX ist ein Build von [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) (AGPL-3.0); der Quellcode der Upstream-PRs ist auf GitHub, die KX-spezifischen Patches im OrcaSlicer-KX-Repo.
 
 ---
 
@@ -123,6 +143,13 @@ ist über die verlinkten PRs verfügbar.
 - **[Home-Assistant-Integration](https://github.com/gangoke/kobrax-lan-hass-component)**
   von [@gangoke](https://github.com/gangoke) — bindet Sensoren, Drucksteuerung,
   Licht, Kamera und das GCode-Vorschaubild als native Home-Assistant-Entitäten ein.
+- **[Obico (selbst gehostet)](https://github.com/TheSpaghettiDetective/obico-server)** —
+  die Bridge bietet eine Moonraker-kompatible API, die
+  [moonraker-obico](https://github.com/TheSpaghettiDetective/moonraker-obico)
+  akzeptiert; damit hast du Time-Lapse und WebRTC-Live-Stream gegen deinen
+  eigenen Obico-Server. Die KI-Spaghetti-Erkennung ist beim Kobra X
+  experimentell — der Top-Down-Kamerawinkel weicht von dem ab, auf den
+  das Modell trainiert wurde.
 
 > Dies sind **Community-Projekte**, die nicht von KX-Bridge betreut oder
 > supportet werden. Bei Fragen oder Problemen bitte das verlinkte Repository nutzen.

README.es.md

@@ -0,0 +1,277 @@
+<div align="center">
+
+<img src="knlogo.png" alt="KX-Bridge" width="160"/>
+
+# KX-Bridge
+
+**Controla tu Anycubic Kobra X con OrcaSlicer — sin Klipper, sin Raspberry Pi.**
+
+Un puente compatible con Moonraker que se comunica directamente con la impresora.
+
+<sub>🧪 Un usuario en Reddit ha reportado que el puente también funciona con la
+**Kobra S1** y la **Kobra S1 Max** — los protocolos parecen compatibles, pero
+ninguna está oficialmente probada ni soportada. Se agradece el feedback.</sub>
+
+<sub>🇬🇧 <a href="README.md">English version</a>  ·  🇩🇪 <a href="README.de.md">Deutsche Version</a></sub>
+
+<br>
+
+[![Ko-fi](https://img.shields.io/badge/Ko--fi-Apoya%20este%20proyecto-FF5E5B?style=for-the-badge&logo=ko-fi&logoColor=white)](https://ko-fi.com/viewitde)
+&nbsp;
+[![Releases](https://img.shields.io/badge/Descargar-Lanzamientos-2EA043?style=for-the-badge&logo=gitea&logoColor=white)](https://gitea.it-drui.de/viewit/KX-Bridge-Release/releases)
+&nbsp;
+[![Downloads](https://img.shields.io/badge/Descargas-800%2B-8957E5?style=for-the-badge&logo=gitea&logoColor=white)](https://gitea.it-drui.de/viewit/KX-Bridge-Release/releases)
+&nbsp;
+[![Video](https://img.shields.io/badge/YouTube-Tutorial-FF0000?style=for-the-badge&logo=youtube&logoColor=white)](https://www.youtube.com/watch?v=1Ql4wfH27fM)
+
+<sub>¿Te gusta KX-Bridge? Un café en <a href="https://ko-fi.com/viewitde">Ko-fi</a> mantiene el proyecto vivo. ☕</sub>
+
+</div>
+
+---
+
+## ✨ Características
+
+| | |
+|---|---|
+| 🖨️ | **Control de impresora** — iniciar, pausar, reanudar, cancelar, temperaturas, velocidad de impresión |
+| 📊 | **Estado en tiempo real** — temperatura, progreso, capas, tiempo restante, transmisión de cámara |
+| 🎨 | **AMS / multicolor** — ranuras con **selector de perfil por ranura** (asigna tu propia marca de los perfiles de OrcaSlicer a cada ranura); el puente escribe material y color al display de la impresora |
+| 📦 | **Importa tus propios perfiles de OrcaSlicer** — arrastra un ZIP de `~/.config/OrcaSlicer/user/<id>/filament/` al puente; aparecen en el desplegable de la ranura bajo ★ Perfiles propios |
+| 📷 | **Integración con Obico (experimental)** — Time-Lapse y stream en vivo WebRTC contra un [servidor Obico](https://github.com/TheSpaghettiDetective/obico-server) autoalojado vía moonraker-obico |
+| 📐 | **Stream H.264 directo + altura Z** — ruta de cámara de bajo consumo de CPU para Obico, Z actual derivada de la altura de capa (widget de progreso) |
+| 🗂️ | **Explorador de GCode** — archivos subidos con vistas previas, historial de impresión, búsqueda y filtros |
+| 🧩 | **Multi-impresora** — múltiples impresoras en **una** instancia del puente, cambia mediante un menú desplegable |
+| ➕ | **Añade una impresora con un clic** — solo introduce la IP, las credenciales se importan automáticamente |
+| 🔁 | **Reconexión MQTT robusta** — el puente sobrevive a reinicios nocturnos de la impresora sin reinicio manual |
+| 🌐 | **Interfaz multilingüe** — DE / EN / ES / 中文, detecta automáticamente el idioma del navegador |
+| 🔄 | **Actualización automática** — instala nuevas versiones directamente desde el navegador |
+| 🧠 | **OrcaSlicer** — protocolo Moonraker completo (HTTP + WebSocket); usa el [build OrcaSlicer-KX](#-slicer-recomendado) para emparejamiento correcto de vendor por ranura |
+
+---
+
+## 🚀 Inicio rápido
+
+### 1. Prepara la impresora
+
+Activa el modo LAN en la Kobra X:
+**Pantalla de la impresora → Ajustes → Activar modo LAN**
+
+### 2. Inicia el puente
+
+**Docker (recomendado):**
+```bash
+docker compose up -d
+```
+
+**Binario Linux (sin Docker):**
+```bash
+chmod +x kx-bridge-linux-amd64 && ./kx-bridge-linux-amd64
+```
+
+**EXE Windows (sin Docker):**
+```
+kx-bridge.exe
+```
+
+> ⚠️ **Certificados TLS necesarios para el binario standalone**
+>
+> El bridge habla con el MQTT de la impresora vía mTLS y necesita dos
+> ficheros de certificado **junto al binario**:
+>
+> - `anycubic_slicer.crt`
+> - `anycubic_slicer.key`
+>
+> Ambos vienen en **`anycubic-certs.zip`** en la misma página de release.
+> Descárgalo y extrae los dos ficheros en el mismo directorio que
+> `kx-bridge-linux-amd64` o `kx-bridge.exe`. Sin ellos verás
+> `Verbindung fehlgeschlagen: TLS-Zertifikate fehlen …` (0.9.19.1+) o
+> `[Errno 2] No such file or directory` (versiones anteriores).
+>
+> Estructura correcta:
+> ```
+> ~/kx-bridge/
+> ├── kx-bridge-linux-amd64   (o kx-bridge.exe)
+> ├── anycubic_slicer.crt     ← de anycubic-certs.zip
+> ├── anycubic_slicer.key     ← de anycubic-certs.zip
+> └── config/                 (se crea en el primer arranque)
+> ```
+>
+> Los usuarios de Docker no necesitan hacer esto — los certificados
+> están incluidos en la imagen.
+
+> Con los binarios de Linux y Windows, `config/` y `data/` (configuración,
+> SQLite, almacén de GCode) viven junto al programa. Copia toda la carpeta
+> para mover la instalación.
+
+**Python directamente:**
+```bash
+pip install -r bridge/requirements.txt
+python bridge/kobrax_moonraker_bridge.py
+```
+
+### 3. Configura la impresora
+
+Abre la interfaz web: **`http://IP-DEL-PUENTE:7125`**
+
+En el primer inicio, la pestaña **Impresoras** muestra *"+ Añadir impresora"* — solo introduce la dirección IP
+de la impresora, el resto (usuario, contraseña, ID de dispositivo) se obtiene de la impresora y se desencripta
+automáticamente. Listo.
+
+> ¿Más de una impresora? Simplemente haz clic en *"+ Añadir impresora"* de nuevo — cada una recibe su propio puerto
+> (7125, 7126, …) y se puede seleccionar desde el menú desplegable del encabezado.
+
+### 4. Conecta OrcaSlicer
+
+Impresora → Tipo de conexión **Moonraker** → Host: `http://IP-DEL-PUENTE:7125`
+
+> ⚠️ El tipo de conexión debe ser **Moonraker** (no "Bambu" ni "Klipper").
+> Introduce la URL completa incluyendo `http://` y el puerto `:7125` en el campo de host.
+
+---
+
+## 📺 Vídeo tutorial
+
+[![Configuración y uso de KX-Bridge](https://img.youtube.com/vi/1Ql4wfH27fM/hqdefault.jpg)](https://www.youtube.com/watch?v=1Ql4wfH27fM)
+
+---
+
+## 🎨 Slicer recomendado
+
+Para una sincronización de filamento AMS correcta ofrecemos una **versión modificada de OrcaSlicer**:
+
+→ **[Lanzamientos de OrcaSlicer-KX](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/releases/latest)** (Linux AppImage + Windows ZIP)
+
+**PRs upstream incluidos en el build KX:**
+
+- **[PR #13372](https://github.com/SoftFever/OrcaSlicer/pull/13372)** — Corrección de sincronización Moonraker / Happy-Hare AMS (las posiciones de las ranuras se mantienen correctas incluso con ranuras vacías)
+- **[PR #13719](https://github.com/SoftFever/OrcaSlicer/pull/13719)** — Coincidencia de Vendor + Nombre para Moonraker (lee `name` + `vendor_name` por ranura y los empareja con los presets de filamento del usuario), por [@LordGuenni](https://github.com/LordGuenni)
+- **[PR #13315](https://github.com/SoftFever/OrcaSlicer/pull/13315)** — `filament_id` único para presets de usuario (los perfiles nuevos reciben un ID nuevo en vez de heredar `OGFL99` del padre genérico), por [@mrnoisytiger](https://github.com/mrnoisytiger)
+
+**Más cuatro mejoras específicas de KX encima:**
+
+- Respetar el hint de filamento del puente (`tray_info_idx` + vendor)
+- Coincidencia por vendor incluso cuando el preset base no es **is_compatible** con la impresora activa (así un perfil copiado de otra máquina sigue coincidiendo por vendor)
+- Coincidencia por vendor cuando `tray_info_idx` está definido pero su preset es incompatible
+- Búsqueda de dos pasadas: primero presets compatibles, luego todos los visibles
+
+**Por qué importa:** sin #13719 todas las ranuras AMS caen en `Generic PLA` / `Generic PETG` aunque el puente ya envíe la marca concreta (`name + vendor_name + gate_filament_name`). Con el build KX, OrcaSlicer coincide con tus presets de usuario reales — incluyendo los perfiles que importaste al puente vía [Importa tus propios perfiles de OrcaSlicer](#-características).
+
+OrcaSlicer upstream también funciona para rebanar e imprimir — solo pierdes la coincidencia de vendor por ranura en la sincronización AMS. El material y color por ranura se pueden empujar puente → impresora con cualquier slicer (eso va por MQTT, no por el slicer).
+
+OrcaSlicer-KX es un build de [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) (AGPL-3.0); el código fuente de cada PR upstream está en GitHub, los parches específicos de KX en el repo OrcaSlicer-KX.
+
+---
+
+## 🏠 Comunidad e integraciones
+
+- **[Integración con Home Assistant](https://github.com/gangoke/kobrax-lan-hass-component)**
+  por [@gangoke](https://github.com/gangoke) — expone sensores, controles de impresión,
+  luz, cámara y la vista previa del GCode como entidades nativas de Home Assistant.
+- **[Obico (autoalojado)](https://github.com/TheSpaghettiDetective/obico-server)** —
+  el puente expone una API compatible con Moonraker que
+  [moonraker-obico](https://github.com/TheSpaghettiDetective/moonraker-obico)
+  acepta, así obtienes Time-Lapse y streaming en vivo WebRTC contra tu propio
+  servidor Obico. La detección de fallos por IA es experimental en la Kobra X
+  (el ángulo cenital de la cámara difiere del que el modelo fue entrenado).
+
+> Estos son **proyectos de la comunidad**, no mantenidos ni soportados por KX-Bridge.
+> Para preguntas o problemas, utiliza el repositorio enlazado.
+
+---
+
+## 🔧 Obtener credenciales manualmente
+
+Normalmente no es necesario — *"+ Añadir impresora"* lo hace automáticamente. Si lo necesitas:
+
+```bash
+fetch_credentials --ip 192.168.x.x --write-config
+```
+Obtiene las credenciales directamente de la impresora vía HTTP y las escribe en `config/config.ini`.
+Solo se requiere la IP de la impresora, no hace falta un slicer.
+
+Alternativamente (si se desconoce la IP): abre AnycubicSlicerNext, conecta la impresora, luego ejecuta
+`extract_credentials` → muestra usuario, contraseña, ID de dispositivo y la IP de la impresora.
+
+> **Descargas:** [Lanzamientos](https://gitea.it-drui.de/viewit/KX-Bridge-Release/releases) → `fetch_credentials` / `extract_credentials` (Linux y Windows)
+
+---
+
+## ⚙️ Comandos útiles
+
+```bash
+docker compose logs -f                 # mostrar registros
+docker compose down                    # detener el puente
+docker compose pull && docker compose up -d   # actualizar a la imagen publicada más reciente
+docker compose up -d --build           # recompilar localmente (en lugar de descargar)
+```
+
+---
+
+## 🩹 Solución de problemas
+
+<details>
+<summary><b>"Credenciales MQTT incorrectas" al iniciar</b></summary>
+
+- Vuelve a añadir la impresora mediante *"+ Añadir impresora"*, o ejecuta
+  `fetch_credentials --ip <ip> --write-config` y reinicia el puente
+- Introduce solo la dirección IP, sin puerto (✗ `192.168.1.102:9883` → ✓ `192.168.1.102`)
+</details>
+
+<details>
+<summary><b>Impresora no encontrada / modo LAN no activado</b></summary>
+
+- En la pantalla de la impresora: Ajustes → Activar modo LAN
+- La impresora y el puente deben estar en la misma red
+</details>
+
+<details>
+<summary><b>Docker: Permiso denegado</b></summary>
+
+```bash
+sudo usermod -aG docker $USER   # luego cierra la sesión y vuelve a iniciarla
+```
+</details>
+
+<details>
+<summary><b>Actualizar desde 0.9.1 o anterior</b></summary>
+
+A partir de 0.9.2, KX-Bridge almacena la configuración en `config/config.ini` en lugar de `.env`.
+La migración se ejecuta automáticamente en el primer inicio después de la actualización — no requiere acción.
+</details>
+
+---
+
+## 🔒 Seguridad
+
+- El puente es accesible en la red local en `http://<IP-del-host>:7125` — **no** lo expongas a internet
+- `config/config.ini` contiene las credenciales de la impresora — no las compartas públicamente
+- Las credenciales **no** otorgan acceso a los servicios en la nube de Anycubic
+
+---
+
+## 📄 Licencia
+
+[![License: GPL v3](https://img.shields.io/badge/License-GPL_v3-blue.svg)](LICENSE)
+
+KX-Bridge se publica bajo la **GNU General Public License v3.0**. Consulta
+[LICENSE](LICENSE) para el texto completo. Las bifurcaciones y modificaciones deben
+permanecer bajo GPLv3 si se redistribuyen.
+
+La implementación del protocolo MQTT es el resultado de una ingeniería inversa
+independiente con fines de interoperabilidad (§69e UrhG / Directiva de Software de la UE
+Art. 6). El material de terceros en el repositorio (certificados TLS de Anycubic)
+**no** está cubierto por GPLv3 y se incluye únicamente para permitir la
+autenticación contra impresoras que el usuario final ya posee. Consulta
+[NOTICE.md](NOTICE.md) para más detalles y el aviso legal.
+
+Este proyecto es independiente y no está afiliado con Anycubic.
+
+<div align="center">
+<br>
+
+**Si KX-Bridge te ayuda, el proyecto agradece tu apoyo:**
+
+[![Ko-fi](https://ko-fi.com/img/githubbutton_sm.svg)](https://ko-fi.com/viewitde)
+
+</div>

README.md

@@ -8,7 +8,11 @@
 
 A Moonraker-compatible bridge that talks directly to the printer.
 
-<sub>🇩🇪 <a href="README.de.md">Deutsche Version</a></sub>
+<sub>🧪 A community report on Reddit suggests the bridge also works with the
+**Kobra S1** and **Kobra S1 Max** — protocols look compatible, but neither is
+officially tested or supported. Feedback welcome.</sub>
+
+<sub>🇩🇪 <a href="README.de.md">Deutsche Version</a>  ·  🇪🇸 <a href="README.es.md">Versión española</a></sub>
 
 <br>
 
@@ -32,12 +36,17 @@ A Moonraker-compatible bridge that talks directly to the printer.
 |---|---|
 | 🖨️ | **Printer control** — start, pause, resume, cancel, temperatures, print speed |
 | 📊 | **Live status** — temperature, progress, layers, remaining time, camera stream |
-| 🎨 | **AMS / multicolor** — filament slots, per-channel remapping, MMU emulation for OrcaSlicer filament sync |
+| 🎨 | **AMS / multicolor** — slots with per-slot **profile picker** (assign your own brand from OrcaSlicer profiles per slot); bridge writes material & colour back to the printer display |
+| 📦 | **Import your own OrcaSlicer profiles** — drag a ZIP from `~/.config/OrcaSlicer/user/<id>/filament/` into the bridge; they show up in the slot dropdown under ★ Own profiles |
+| 📷 | **Obico integration (experimental)** — Time-Lapse and WebRTC live stream against a self-hosted [Obico server](https://github.com/TheSpaghettiDetective/obico-server) via moonraker-obico |
+| 📐 | **Direct H.264 stream + Z-height** — low-CPU camera path for Obico, current Z derived from layer-height for the print-progress widget |
 | 🗂️ | **GCode browser** — uploaded files with thumbnails, print history, search & filter |
 | 🧩 | **Multi-printer** — multiple printers in **one** bridge instance, switch via dropdown |
 | ➕ | **Add a printer with one click** — just enter the IP, credentials are imported automatically |
+| 🔁 | **Robust MQTT reconnect** — bridge survives overnight printer reboots without manual restart |
+| 🌐 | **Multi-language UI** — DE / EN / ES / 中文, auto-detect browser locale |
 | 🔄 | **Self-update** — install new versions directly in the browser |
-| 🌐 | **OrcaSlicer** — full Moonraker protocol (HTTP + WebSocket), EN/DE UI |
+| 🧠 | **OrcaSlicer** — full Moonraker protocol (HTTP + WebSocket); pair with the [OrcaSlicer-KX build](#-recommended-slicer) for proper per-slot vendor matching |
 
 ---
 
@@ -103,16 +112,28 @@ Printer → Connection type **Moonraker** → Host: `http://BRIDGE-IP:7125`
 
 ## 🎨 Recommended Slicer
 
-For the best KX-Bridge experience we offer a **patched OrcaSlicer build** that
+For proper AMS filament-sync we ship a **patched OrcaSlicer build**:
-bundles three open SoftFever/OrcaSlicer PRs: the Anycubic Kobra X printer
-profile, a multicolor G-code fix and — most importantly — a Moonraker/Happy-Hare
-filament-sync fix that keeps AMS slot positions intact even with an empty slot.
 
 → **[OrcaSlicer-KX releases](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/releases/latest)** (Linux AppImage + Windows ZIP)
 
-Standard OrcaSlicer also works; the patched build mainly improves AMS handling.
+**Upstream PRs bundled in the KX build:**
-It's a build of [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) (AGPL-3.0);
+
-source is available via the linked PRs.
+- **[PR #13372](https://github.com/SoftFever/OrcaSlicer/pull/13372)** — Moonraker / Happy-Hare AMS sync fix (slot positions stay correct even with empty slots)
+- **[PR #13719](https://github.com/SoftFever/OrcaSlicer/pull/13719)** — Vendor + Name matching for Moonraker (reads `name` + `vendor_name` per slot and matches against the user's filament presets), by [@LordGuenni](https://github.com/LordGuenni)
+- **[PR #13315](https://github.com/SoftFever/OrcaSlicer/pull/13315)** — Unique `filament_id` for user presets (so newly created custom profiles get a fresh ID instead of inheriting `OGFL99` from the generic parent), by [@mrnoisytiger](https://github.com/mrnoisytiger)
+
+**Plus four KX-specific matching improvements on top:**
+
+- Respect the bridge filament hint (`tray_info_idx` + vendor)
+- Vendor match also when the chosen base preset is **not is_compatible** with the active printer (so a profile copied from a different machine still matches by vendor)
+- Vendor match when `tray_info_idx` is set but its preset is incompatible
+- Two-pass lookup: first compatible presets, then all visible ones
+
+**Why this matters:** without #13719 the AMS slots in OrcaSlicer all fall back to `Generic PLA` / `Generic PETG` even though the bridge already sends the concrete brand (`name + vendor_name + gate_filament_name`). With the KX build OrcaSlicer matches your actual user presets — including profiles you imported into the bridge via the [Import your own OrcaSlicer profiles](#-features) flow.
+
+Stock upstream OrcaSlicer still works for slicing and printing — you just lose the per-slot brand matching on AMS sync. Slot material + colour can still be pushed bridge → printer either way (that goes over MQTT, not via the slicer).
+
+OrcaSlicer-KX is a build of [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) (AGPL-3.0); source for each upstream PR is on GitHub, KX-specific patches live in the OrcaSlicer-KX repo.
 
 ---
 
@@ -121,6 +142,12 @@ source is available via the linked PRs.
 - **[Home Assistant integration](https://github.com/gangoke/kobrax-lan-hass-component)**
   by [@gangoke](https://github.com/gangoke) — exposes sensors, print controls,
   light, camera and the GCode thumbnail as native Home Assistant entities.
+- **[Obico (self-hosted)](https://github.com/TheSpaghettiDetective/obico-server)** —
+  the bridge exposes a Moonraker-compatible surface that
+  [moonraker-obico](https://github.com/TheSpaghettiDetective/moonraker-obico)
+  accepts, so you get Time-Lapse and WebRTC live streaming against your own
+  Obico server. The AI failure-detection side is experimental on the Kobra X
+  (top-down camera angle differs from what the model was trained on).
 
 > These are **community projects**, not maintained or supported by KX-Bridge.
 > For questions or issues, please use the linked repository.

VERSION

@@ -1 +1 @@
-0.9.17
+0.9.20

config_loader.py

@@ -169,16 +169,23 @@ def list_printers() -> list[dict]:
 def list_filament_profiles() -> dict[int, dict]:
     """Liest die [filament_profiles]-Sektion aus config.ini.
 
-    Format pro AMS-Slot (slot_N_id + slot_N_vendor):
+    Format pro AMS-Slot — primärer Selector ist (vendor, name), die `id` wird
-      [filament_profiles]
+    aus der orca_filaments.json beim Speichern nachgeschlagen und mitgeführt
-      slot_0_id     = OGFL01
+    (als Hint für OrcaSlicer; das Orca-Datenmodell hat ~136 Profile mit
-      slot_0_vendor = Polymaker
+    derselben filament_id wie 'OGFL99', d.h. die ID ist nicht eindeutig):
-      slot_1_id     = OGFG23
-      slot_1_vendor = Polymaker
 
-    Gibt einen Dict {slot_index: {"id": ..., "vendor": ...}} zurück.
+      [filament_profiles]
-    Leere/fehlende Slots werden NICHT aufgenommen — das Default-Mapping
+      slot_0_vendor = Polymaker
+      slot_0_name   = PolyTerra PLA
+      slot_0_id     = OGFL01
+
+    Gibt einen Dict {slot_index: {"id": ..., "vendor": ..., "name": ...}}
+    zurück. Leere/fehlende Slots werden NICHT aufgenommen — das Default-Mapping
     (per filament_type) in der Bridge bleibt dann aktiv.
+
+    Backwards-Kompat: alte Configs mit nur (vendor, id) bleiben lesbar; `name`
+    fehlt dann und der Aufrufer kann optional aus der orca_filaments.json
+    rekonstruieren.
     """
     path = _find_config_file()
     if not path:
@@ -189,7 +196,7 @@ def list_filament_profiles() -> dict[int, dict]:
         return {}
     result: dict[int, dict] = {}
     for key, value in cfg.items("filament_profiles"):
-        # Erwartet: slot_<idx>_id oder slot_<idx>_vendor
+        # Erwartet: slot_<idx>_id oder slot_<idx>_vendor oder slot_<idx>_name
         if not key.startswith("slot_"):
             continue
         parts = key.split("_", 2)
@@ -200,13 +207,11 @@ def list_filament_profiles() -> dict[int, dict]:
         except ValueError:
             continue
         field = parts[2]
-        if field not in ("id", "vendor"):
+        if field not in ("id", "vendor", "name"):
             continue
         if not value.strip():
             continue
         result.setdefault(slot_idx, {})[field] = value.strip()
-    # Leere Einträge (nur vendor ohne id oder umgekehrt) trotzdem behalten —
-    # der Aufrufer prüft selbst was er nutzt.
     return result
 
 
@@ -214,24 +219,26 @@ def save_filament_profiles(profiles: dict[int, dict]) -> bool:
     """Schreibt die übergebenen Slot-Profile in die [filament_profiles]-
     Sektion der config.ini. Existierende Einträge werden komplett ersetzt.
 
-    profiles: {slot_index: {"id": "OGFL01", "vendor": "Polymaker"}}
+    profiles: {slot_index: {"id": "OGFL01", "vendor": "Polymaker", "name": "PolyTerra PLA"}}
+    Mindestens vendor+name müssen gesetzt sein; id ist optional (Hint).
     """
     path = _find_config_file()
     if not path:
         return False
     cfg = configparser.ConfigParser()
     cfg.read(path, encoding="utf-8")
-    # Sektion neu aufbauen — entfernt damit auch alte/verwaiste Slots
     if cfg.has_section("filament_profiles"):
         cfg.remove_section("filament_profiles")
     if profiles:
         cfg["filament_profiles"] = {}
         for slot_idx in sorted(profiles.keys()):
             entry = profiles[slot_idx] or {}
-            if entry.get("id"):
-                cfg["filament_profiles"][f"slot_{slot_idx}_id"] = entry["id"]
             if entry.get("vendor"):
                 cfg["filament_profiles"][f"slot_{slot_idx}_vendor"] = entry["vendor"]
+            if entry.get("name"):
+                cfg["filament_profiles"][f"slot_{slot_idx}_name"] = entry["name"]
+            if entry.get("id"):
+                cfg["filament_profiles"][f"slot_{slot_idx}_id"] = entry["id"]
     with open(path, "w", encoding="utf-8") as f:
         cfg.write(f)
     return True

kobrax_client.py

@@ -154,6 +154,13 @@ class KobraXClient:
     # -- Connection ----------------------------------------------------------
 
     def _do_connect(self):
+        if not os.path.exists(CERT_FILE) or not os.path.exists(KEY_FILE):
+            raise FileNotFoundError(
+                f"TLS-Zertifikate fehlen: anycubic_slicer.crt + anycubic_slicer.key "
+                f"müssen neben der kx-bridge Binary liegen ({_SCRIPT_DIR}/). "
+                f"Lade anycubic-certs.zip vom Gitea-Release herunter und entpacke "
+                f"die Dateien dorthin."
+            )
         ctx = ssl.SSLContext(ssl.PROTOCOL_TLS_CLIENT)
         ctx.check_hostname = False
         ctx.verify_mode    = ssl.CERT_NONE
@@ -179,10 +186,24 @@ class KobraXClient:
     def connect(self):
         self._do_connect()
         self._running = True
-        t = threading.Thread(target=self._read_loop, daemon=True)
+        self._ensure_reader()
-        t.start()
         time.sleep(0.3)
 
+    def _ensure_reader(self):
+        """Stellt sicher dass der Reader-Thread lebt. Wenn der Reader nach einer
+        früheren disconnect/reconnect-Sequenz oder einem unbehandelten Fehler
+        gestorben ist, würden empfangene Replies sonst nie ankommen — publish()
+        würde dann zwar senden, aber auf Antworten ewig warten."""
+        if not self._running:
+            return  # gewollter disconnect
+        t = getattr(self, "_reader_thread", None)
+        if t is not None and t.is_alive():
+            return
+        self._reader_thread = threading.Thread(
+            target=self._read_loop, daemon=True, name="kobrax-mqtt-reader",
+        )
+        self._reader_thread.start()
+
     def disconnect(self):
         self._running = False
         try:
@@ -191,20 +212,34 @@ class KobraXClient:
             pass
 
     def _reconnect(self):
+        """Persistenter Reconnect: versucht endlos weiter bis der Drucker wieder
+        antwortet oder disconnect() gerufen wurde. Backoff cappt bei 60 s. Die
+        ersten 5 Versuche loggen als WARNING (akute Verbindungsstörung), danach
+        nur DEBUG um Log-Spam bei langem Drucker-Ausfall (z.B. über Nacht
+        ausgeschaltet) zu vermeiden."""
         log.warning("Verbindung verloren – reconnect…")
         try:
             self._sock.close()
         except Exception:
             pass
-        for delay in [2, 4, 8, 15, 30]:
+        delays = [2, 4, 8, 15, 30, 60]
+        attempt = 0
+        while self._running:
+            delay = delays[min(attempt, len(delays) - 1)]
             try:
                 self._do_connect()
-                log.info("Reconnect erfolgreich")
+                log.info("Reconnect erfolgreich (nach %d Versuchen)", attempt + 1)
                 return True
             except Exception as e:
-                log.warning("Reconnect fehlgeschlagen (%s), warte %ss…", e, delay)
+                attempt += 1
-                time.sleep(delay)
+                lvl = log.warning if attempt <= 5 else log.debug
-        return False
+                lvl("Reconnect fehlgeschlagen (%s, Versuch %d), warte %ss…", e, attempt, delay)
+                # Geteiltes Sleep damit disconnect() den Loop schneller bricht.
+                slept = 0.0
+                while slept < delay and self._running:
+                    time.sleep(min(0.5, delay - slept))
+                    slept += 0.5
+        return False  # nur wenn disconnect() gerufen wurde
 
     def _subscribe(self, topic: str):
         with self._lock:
@@ -348,6 +383,9 @@ class KobraXClient:
     # -- Publish + request/response ------------------------------------------
 
     def publish(self, msg_type: str, action: str, data=None, timeout: float = 5.0) -> dict | None:
+        # Falls Reader-Thread aus historischen Gründen tot ist, wiederbeleben —
+        # sonst würden Replies nie ankommen und event.wait() läuft ins Timeout.
+        self._ensure_reader()
         msgid   = str(uuid.uuid4())
         payload = json.dumps({
             "type":      msg_type,
@@ -413,6 +451,7 @@ class KobraXClient:
 
     def publish_web(self, msg_type: str, action: str, data=None) -> None:
         """Fire-and-forget publish on the web/printer topic (used for runtime updates during print)."""
+        self._ensure_reader()
         msgid   = str(uuid.uuid4())
         payload = json.dumps({
             "type":      msg_type,
@@ -429,7 +468,14 @@ class KobraXClient:
             with self._lock:
                 self._sock.sendall(_build_publish(topic, payload))
         except Exception as e:
-            log.error("web send error: %s", e)
+            log.error("web send error: %s, reconnecting…", e)
+            # Reconnect triggern (analog zu publish()); ohne Retry weil
+            # fire-and-forget — der nächste Aufruf wird auf den frischen Socket
+            # treffen.
+            try:
+                self._reconnect()
+            except Exception:
+                pass
 
     # -- High-level commands -------------------------------------------------
 

kx-bridge.spec

@@ -6,7 +6,7 @@
 # ein → zur Laufzeit über sys._MEIPASS lesbar (_WEB_BASE in der Bridge).
 from PyInstaller.utils.hooks import collect_all
 
-datas = [("web", "web"), ("data", "static")]  # bridge/data/ → static/ im _MEIPASS
+datas = [("web", "web"), ("data", "static"), ("VERSION", ".")]  # bridge/data/ → static/ im _MEIPASS
 binaries = []
 hiddenimports = []
 

orca_filaments.py

@@ -0,0 +1,147 @@
+"""OrcaSlicer Filament-Profil Parser.
+
+Geteilt zwischen dem Generator (tools/gen_orca_filament_list.py) und dem
+Custom-Profile-Import-Endpoint (bridge/kobrax_moonraker_bridge.py).
+
+Liest Orca-Filament-JSON-Dateien (System- oder User-Profile) und gibt
+sie als normalisierte Liste mit (id, name, vendor, type, color) zurück.
+"""
+from __future__ import annotations
+
+import json
+import re
+
+
+def first_str(value, default: str = "") -> str:
+    """Orca-Profile speichern manche Felder als ['wert']. Liefert erstes
+    Element als String."""
+    if isinstance(value, list):
+        return str(value[0]) if value else default
+    if isinstance(value, str):
+        return value
+    return default
+
+
+def clean_name(raw: str) -> str:
+    """Strippt printer-/varianten-spezifische Suffixe:
+      'PolyTerra PLA @base'                       → 'PolyTerra PLA'
+      'Anycubic PLA @Anycubic Kobra X 0.4 nozzle' → 'Anycubic PLA'
+      'Anker Generic PLA 0.4 nozzle'              → 'Anker Generic PLA'
+    """
+    name = re.sub(r"\s*@.*$", "", raw).strip()
+    name = re.sub(r"\s+\d+(\.\d+)?\s*nozzle\s*$", "", name, flags=re.IGNORECASE).strip()
+    return name or raw
+
+
+def parse_profile(data: dict, by_name: dict | None = None,
+                  path_vendor: str | None = None,
+                  source_path: str = "",
+                  system_index: list | None = None) -> dict | None:
+    """Parsed ein einzelnes Orca-Filament-Profil zum Bridge-Schema.
+
+    `by_name` ist optional ein {name: [profile, …]}-Index für Inherits-Resolve
+    aus dem rohen Source-Tree (Generator). Bei Single-File-Import (User-Datei
+    aus OrcaSlicer-User-Dir) reichen wir stattdessen `system_index` rein —
+    die fertige System-Profile-Liste aus orca_filaments.json. Damit können
+    wir filament_id/vendor/type/color über die `inherits`-Kette aus dem
+    System-Parent ableiten, auch wenn das User-Profil diese Felder nicht
+    selbst setzt (typisch: User-Override-Profile haben nur Tweaks).
+
+    Liefert {id, name, vendor, type, color} oder None wenn das Profil
+    keine filament_id hat (z.B. abstrakte @base-Templates).
+    """
+    if not isinstance(data, dict):
+        return None
+    # User-Profile aus dem OrcaSlicer-User-Dir setzen oft KEIN "type"-Feld —
+    # das kommt vom System-Parent. Wir akzeptieren das wenn entweder "type"
+    # explizit "filament" ist ODER ein "inherits" auf ein anderes Profil zeigt.
+    if data.get("type") not in (None, "filament") and not data.get("inherits"):
+        return None
+    if data.get("type") == "filament" and data.get("inherits") is None and not data.get("filament_id"):
+        # type=filament aber kein parent + keine ID → wertloses Stub
+        return None
+    inst = data.get("instantiation", "true")
+    if isinstance(inst, str) and inst.lower() == "false":
+        return None
+
+    # Build system-name-Index für den fallback-Lookup wenn system_index gesetzt.
+    sys_by_name: dict[str, dict] = {}
+    if system_index:
+        for p in system_index:
+            if isinstance(p, dict) and p.get("name"):
+                sys_by_name[p["name"]] = p
+
+    def _resolve(key: str, depth: int = 5):
+        cur_list = [data]
+        for _ in range(depth):
+            for cur in cur_list:
+                v = cur.get(key)
+                if v not in ("", [], None, [""]) and v is not None:
+                    return v
+            # Erst raw-Inherits via by_name (Generator-Pfad)
+            if by_name:
+                next_list: list[dict] = []
+                for cur in cur_list:
+                    parent_name = cur.get("inherits")
+                    if parent_name and parent_name in by_name:
+                        next_list.extend(by_name[parent_name])
+                if next_list:
+                    cur_list = next_list
+                    continue
+            break
+        return None
+
+    def _resolve_via_system_index(key: str):
+        """Inherits-Kette über system_index (clean_name-Match)."""
+        parent_raw = data.get("inherits")
+        if not parent_raw or not sys_by_name:
+            return None
+        parent_clean = clean_name(parent_raw)
+        sys_p = sys_by_name.get(parent_clean)
+        if not sys_p:
+            return None
+        # System-JSON benutzt schon das normalisierte Schema
+        mapping = {
+            "filament_id":              "id",
+            "filament_vendor":          "vendor",
+            "filament_type":            "type",
+            "default_filament_colour":  "color",
+        }
+        return sys_p.get(mapping.get(key, key))
+
+    def _resolve_full(key: str):
+        v = _resolve(key)
+        if v not in ("", [], None, [""]) and v is not None:
+            return v
+        return _resolve_via_system_index(key)
+
+    fid = _resolve_full("filament_id")
+    if not fid or not isinstance(fid, str):
+        return None
+
+    name_raw = data.get("name", fid)
+    name = clean_name(name_raw)
+    vendor = first_str(_resolve_full("filament_vendor")) or (path_vendor or "Generic")
+    ftype  = first_str(_resolve_full("filament_type"), "")
+    color  = first_str(_resolve_full("default_filament_colour"), "")
+
+    return {
+        "id":     fid,
+        "name":   name,
+        "vendor": vendor,
+        "type":   ftype,
+        "color":  color,
+    }
+
+
+def parse_profile_bytes(blob: bytes, source_name: str = "",
+                        system_index: list | None = None) -> dict | None:
+    """Liest ein einzelnes Profil aus JSON-Bytes. Für File-Upload-Pfad.
+    `system_index` ist optional die fertige Liste aus orca_filaments.json —
+    wird für die Inherits-Resolve von User-Profilen genutzt die das volle
+    Schema vom System-Parent erben."""
+    try:
+        data = json.loads(blob.decode("utf-8", errors="replace"))
+    except Exception:
+        return None
+    return parse_profile(data, source_path=source_name, system_index=system_index)

web/themes/default/app.js

@@ -1,11 +1,12 @@
 // ── State ──
 var S={nozzle_temp:0,nozzle_target:0,bed_temp:0,bed_target:0,
   print_state:'standby',filename:'',progress:0,print_duration:0,remain_time:0,
-  curr_layer:0,total_layers:0,printer_name:'Kobra X',firmware_version:'–',
+  curr_layer:0,total_layers:0,z_mm:0,printer_name:'Kobra X',firmware_version:'–',
   camera_url:'',fan_speed:0,print_speed_mode:2,light_on:false,light_brightness:80,
   ams_slots:[],filament_mode:'toolhead',ace_units:[],ace_dry_presets:null,ace_drying:{status:0,target_temp:0,duration:0,remain_time:0,humidity:null,current_temp:null,units:[]},web_upload_warning:1};
 var tempHistory={n:[],b:[]};
 var camOn=false;
+var camUserStopped=false; // user stopped camera manually — suppress auto-restart for this print
 var currentStep=1;
 var currentPanel='dashboard';
 var aceAutoRefillPrefs=(function(){
@@ -101,6 +102,7 @@ function tr(key,fallback){
 function _langToggleLabel(lang){
   if(lang==='de')return 'Deutsch';
   if(lang==='en')return 'English';
+  if(lang==='fr')return 'Français';
   if(lang==='zh-cn')return '简体中文';
   return 'Espanol';
 }
@@ -108,10 +110,10 @@ function _langToggleLabel(lang){
 function _mapSupportedLang(lang){
   if(!lang)return '';
   var l=String(lang).toLowerCase().replace(/_/g,'-').trim();
-  if(l==='de'||l==='en'||l==='es'||l==='zh-cn')return l;
+  if(l==='de'||l==='en'||l==='es'||l==='fr'||l==='zh-cn')return l;
 
   var base=l.split('-')[0];
-  if(base==='de'||base==='en'||base==='es')return base;
+  if(base==='de'||base==='en'||base==='es'||base==='fr')return base;
 
   if(base==='zh'){
     if(l.indexOf('cn')>=0||l.indexOf('hans')>=0||l==='zh')return 'zh-cn';
@@ -282,12 +284,13 @@ function applyLang(){
   setText('d-lbl-remain',T.lbl_remaining);
   setText('d-slicer-label',T.lbl_slicer_time);
   setText('d-lbl-layers',T.lbl_layers);
+  setText('d-lbl-zpos',T.lbl_zpos);
   setText('d-lbl-light',T.lbl_light);
   setText('d-lbl-nozzle',T.label_nozzle);
   setText('d-lbl-bed',T.label_bed);
-  // Dashboard buttons
+  // Dashboard buttons — Pause-Button wird zur Toggle-Action; Resume-Beschriftung
-  setText('d-btn-pause',T.btn_pause);
+  // wird in updatePauseResumeBtn() je nach Druckerzustand gesetzt.
-  setText('d-btn-resume',T.btn_resume);
+  updatePauseResumeBtn();
   setText('d-btn-cancel',T.btn_cancel);
   setText('cam-toggle-btn',camOn?T.btn_cam_stop:T.btn_cam_start);
   setText('cam-placeholder-txt',T.cam_placeholder);
@@ -312,6 +315,17 @@ function applyLang(){
   setText('modal-sec-print',T.settings_print);
   setText('modal-sec-poll',T.settings_poll);
   setText('modal-sec-version',T.settings_version);
+  // Custom-Profile-Import (Issue #41)
+  setText('modal-sec-orca-profiles',T.orca_profile_section);
+  setText('orca-profiles-hint',T.orca_profile_hint);
+  setText('lbl-orca-profiles-import',T.orca_profile_import_btn);
+  setText('lbl-slot-profile-import',T.orca_profile_import_link);
+  setText('profile-import-title',T.orca_profile_import_title);
+  setText('profile-import-dropmsg',T.orca_profile_dropmsg);
+  setText('profile-import-list-label',T.orca_profile_list_label);
+  // Hilfe-Text mit Inline-HTML — innerHTML statt setText
+  var helpEl=document.getElementById('profile-import-help');
+  if(helpEl && T.orca_profile_help_html) helpEl.innerHTML=T.orca_profile_help_html;
   setText('btn-save-settings',T.settings_save);
   setText('lbl-printer-name',T.settings_printer_name);
   setText('lbl-printer-ip',T.settings_printer_ip);
@@ -612,11 +626,14 @@ function applyState(){
     }else{frb.style.display='none';}
   }
   // skip-button (mid-print) – nur sichtbar wenn aktuell gedruckt wird
+  var printing=(s.print_state==='printing'||s.print_state==='paused');
   var skipBtn=document.getElementById('d-btn-skip');
-  if(skipBtn){
+  if(skipBtn) skipBtn.style.display=printing?'':'none';
-    var printing=(s.print_state==='printing'||s.print_state==='paused');
+  // Pause/Stopp-Buttons nur bei aktivem Druck zeigen (sonst verwirrend wenn
-    skipBtn.style.display=printing?'':'none';
+  // der Drucker idle ist). Pause-Button rendert sich passend zum State um.
-  }
+  var ctrlBtns=document.getElementById('d-ctrl-btns');
+  if(ctrlBtns) ctrlBtns.style.display=printing?'':'none';
+  updatePauseResumeBtn();
 
   // header
   var b=document.getElementById('h-badge');
@@ -645,6 +662,7 @@ function applyState(){
 
   var layers=s.curr_layer&&s.total_layers?'L '+s.curr_layer+' / '+s.total_layers:'–';
   var dlayers=document.getElementById('d-layers');if(dlayers)dlayers.textContent=layers;
+  var dzpos=document.getElementById('d-zpos');if(dzpos)dzpos.textContent=s.z_mm>0?s.z_mm.toFixed(2)+' mm':'–';
 
   var delapsed=document.getElementById('d-elapsed');if(delapsed)delapsed.textContent=fmtTime(s.print_duration);
   var dremain=document.getElementById('d-remain');if(dremain)dremain.textContent=s.remain_time>0?fmtTime(s.remain_time):'–';
@@ -778,10 +796,17 @@ function applyState(){
         var activity=(slot.activity||'');
         var pct=empty?T.ams_empty:(slot.consumables_percent!=null?slot.consumables_percent+'%':'–');
         var slotLabel=T.label_slot+' '+(globalIdx+1);
+        var profile=(window._slotProfileMap||{})[globalIdx];
+        var vendorBadge='';
+        if(!empty && profile && profile.vendor){
+          var tt=(profile.name||'')+(profile.id?' ('+profile.id+')':'');
+          vendorBadge='<div class="slot-label" style="font-size:9px;color:var(--accent);font-weight:600;margin-top:1px" title="'+tt+'">'+profile.vendor+'</div>';
+        }
         html+='<div class="ams-slot'+(active?' active':'')+(loaded?' loaded':'')+(activity?' '+activity:'')+(empty?' empty':'')
           +'" style="--slot-color:'+col+';opacity:'+(empty?0.4:1)+';cursor:pointer" onclick="openSlotEdit('+i+')">'
           +'<div class="slot-circle" style="background:'+col+'"></div>'
           +'<div class="slot-material">'+(empty?'–':(slot.type||slot.material_type||'–'))+'</div>'
+          +vendorBadge
           +'<div class="slot-label">'+slotLabel+'</div>'
           +'<div class="slot-label" style="font-size:10px;color:var(--txt2)">'+pct+'</div>'
           +'<div style="font-size:9px;color:var(--txt2);margin-top:2px">✏</div>'
@@ -801,10 +826,14 @@ function applyState(){
   var co=document.getElementById('cam-overlay');
   if(co)co.style.display=(s.print_state==='printing'&&camOn)?'block':'none';
 
-  // auto-start camera during print
+  // auto-start camera during print (unless user explicitly stopped it)
-  if(s.print_state==='printing'&&!camOn&&s.camera_url){
+  if(s.print_state==='printing'&&!camOn&&s.camera_url&&!camUserStopped){
     camStart();
   }
+  // reset user-stopped flag when print ends so next print auto-starts again
+  if(s.print_state!=='printing'){
+    camUserStopped=false;
+  }
 
   updateConnBtn();
 }
@@ -893,11 +922,110 @@ function openSettings(){
   var cl=document.getElementById('update-changelog');if(cl)cl.style.display='none';
   _updateTag='';_updateUrl='';
   document.getElementById('settings-modal').classList.add('open');
+  // Custom-Profile-Liste laden (Issue #41 — Verwaltung von User-importierten
+  // OrcaSlicer-Filament-Profilen)
+  refreshUserProfileList();
 }
 function closeSettings(){
   document.getElementById('settings-modal').classList.remove('open');
 }
 
+// ── Custom Filament Profile Import (Issue #41) ──
+function refreshUserProfileList(){
+  var listEl=document.getElementById('orca-profiles-list');
+  if(!listEl) return;
+  fetch(_apiUrl('/kx/filament/profiles/user')).then(function(r){return r.json();}).then(function(d){
+    var profs=(d && d.result)||[];
+    if(!profs.length){
+      listEl.innerHTML='<i style="color:var(--txt2)">'+(tr('orca_profile_user_empty')||'– keine –')+'</i>';
+      return;
+    }
+    listEl.innerHTML=profs.map(function(p){
+      var label=p.vendor+' / '+p.name+' ('+p.type+')';
+      return '<div style="display:flex;justify-content:space-between;align-items:center;padding:3px 0;border-bottom:1px solid var(--border)">'
+        +'<span>★ '+label+'</span>'
+        +'<button onclick="deleteUserProfile(\''+encodeURIComponent(p.vendor)+'\',\''+encodeURIComponent(p.name)+'\')" '
+        +'style="background:none;border:none;color:var(--err);cursor:pointer;font-size:14px" title="löschen">🗑</button>'
+        +'</div>';
+    }).join('');
+  }).catch(function(){});
+}
+function deleteUserProfile(vendor, name){
+  fetch(_apiUrl('/kx/filament/profiles/user?vendor='+vendor+'&name='+name), {method:'DELETE'})
+    .then(function(r){return r.json();})
+    .then(function(){
+      _orcaFilamentCache=null;
+      refreshUserProfileList();
+      // Falls Import-Dialog offen ist, dort auch refreshen
+      refreshImportDialogList();
+    });
+}
+function openProfileImport(){
+  document.getElementById('profile-import-status').textContent='';
+  refreshImportDialogList();
+  document.getElementById('profile-import-modal').classList.add('open');
+}
+function closeProfileImport(){
+  document.getElementById('profile-import-modal').classList.remove('open');
+}
+function refreshImportDialogList(){
+  var el=document.getElementById('profile-import-list');
+  if(!el) return;
+  fetch(_apiUrl('/kx/filament/profiles/user')).then(function(r){return r.json();}).then(function(d){
+    var profs=(d && d.result)||[];
+    if(!profs.length){
+      el.innerHTML='<i style="color:var(--txt2)">'+(tr('orca_profile_user_empty')||'– keine –')+'</i>';
+      return;
+    }
+    el.innerHTML=profs.map(function(p){
+      var label=p.vendor+' / '+p.name+' ('+p.type+')';
+      return '<div style="display:flex;justify-content:space-between;align-items:center;padding:4px 6px;border-bottom:1px solid var(--border)">'
+        +'<span>★ '+label+'</span>'
+        +'<button onclick="deleteUserProfile(\''+encodeURIComponent(p.vendor)+'\',\''+encodeURIComponent(p.name)+'\')" '
+        +'style="background:none;border:none;color:var(--err);cursor:pointer;font-size:14px" title="löschen">🗑</button>'
+        +'</div>';
+    }).join('');
+  }).catch(function(){});
+}
+function doProfileImportUpload(files){
+  if(!files || !files.length) return;
+  var status=document.getElementById('profile-import-status');
+  status.textContent=(tr('orca_profile_uploading')||'Lade hoch…');
+  status.style.color='var(--txt2)';
+  var done=0, totalAdded=0, totalSkipped=0;
+  function _one(idx){
+    if(idx>=files.length){
+      status.textContent=(tr('orca_profile_done')||'Importiert')+': '+totalAdded
+        +(totalSkipped?' / '+totalSkipped+' '+(tr('orca_profile_skipped')||'übersprungen'):'');
+      status.style.color='var(--ok)';
+      _orcaFilamentCache=null;
+      refreshImportDialogList();
+      refreshUserProfileList();
+      // Wenn Slot-Edit offen ist, Dropdown gleich neu befüllen
+      var mat=document.getElementById('slot-edit-mat');
+      if(mat && document.getElementById('slot-edit-modal').classList.contains('open')){
+        _fillSlotProfileDropdown(mat.value, '', '');
+      }
+      return;
+    }
+    var fd=new FormData();
+    fd.append('file', files[idx]);
+    fetch(_apiUrl('/kx/filament/profiles/user'), {method:'POST', body:fd})
+      .then(function(r){return r.json();})
+      .then(function(d){
+        totalAdded += (d.added||0);
+        totalSkipped += (d.skipped||0);
+        done++;
+        _one(idx+1);
+      })
+      .catch(function(e){
+        status.textContent='Fehler: '+e;
+        status.style.color='var(--err)';
+      });
+  }
+  _one(0);
+}
+
 // ── AMS Slot Edit ──
 var _slotEditIndex=-1;
 var _slotEditLoaded=false;
@@ -920,9 +1048,16 @@ function _loadOrcaFilaments(cb){
     cb(_orcaFilamentCache);
   }).catch(function(){ cb([]); });
 }
-function _fillSlotProfileDropdown(material, currentId){
+function _profileKey(vendor, name){
+  // Eindeutiger Selector: (vendor, name). IDs aus orca_filaments.json sind
+  // NICHT eindeutig (z.B. 136 Profile mit OGFL99). Wir kodieren beide in den
+  // <option>-Value-String mit | als Trenner.
+  return (vendor||'')+'|'+(name||'');
+}
+function _fillSlotProfileDropdown(material, currentVendor, currentName){
   var sel=document.getElementById('slot-edit-profile');
   if(!sel) return;
+  var wantKey=_profileKey(currentVendor, currentName);
   _loadOrcaFilaments(function(profiles){
     // Type-Filter: nur Profile vom passenden material zeigen (z.B. PLA → alle PLA-Varianten)
     var matU=(material||'').toUpperCase().trim();
@@ -932,18 +1067,31 @@ function _fillSlotProfileDropdown(material, currentId){
       return matU==='' || pt===matU || pt.startsWith(matU+'-') || pt.startsWith(matU+' ');
     });
     sel.innerHTML='<option value="">'+tr('slot_edit_profile_default')+'</option>';
-    // Gruppieren nach Vendor
+    // User-Profile (is_user) zuerst — eigene Optgroup '★ Eigene' an erster Stelle.
+    var userProfs=matched.filter(function(p){return p.is_user;});
+    var systemProfs=matched.filter(function(p){return !p.is_user;});
+    function _appendOption(g, p){
+      var o=document.createElement('option');
+      o.value=_profileKey(p.vendor, p.name);
+      o.dataset.vendor=p.vendor;
+      o.dataset.name=p.name;
+      o.dataset.id=p.id || '';
+      o.textContent=(p.is_user?'★ ':'')+p.name;
+      if(o.value===wantKey) o.selected=true;
+      g.appendChild(o);
+    }
+    if(userProfs.length){
+      var gUser=document.createElement('optgroup');
+      gUser.label='★ '+(tr('orca_profile_user_label')||'Eigene Profile');
+      userProfs.forEach(function(p){ _appendOption(gUser, p); });
+      sel.appendChild(gUser);
+    }
+    // System-Profile nach Vendor gruppieren
     var byVendor={};
-    matched.forEach(function(p){ (byVendor[p.vendor]=byVendor[p.vendor]||[]).push(p); });
+    systemProfs.forEach(function(p){ (byVendor[p.vendor]=byVendor[p.vendor]||[]).push(p); });
     Object.keys(byVendor).sort().forEach(function(v){
       var g=document.createElement('optgroup'); g.label=v;
-      byVendor[v].forEach(function(p){
+      byVendor[v].forEach(function(p){ _appendOption(g, p); });
-        var o=document.createElement('option');
-        o.value=p.id; o.dataset.vendor=p.vendor;
-        o.textContent=p.name;
-        if(p.id===currentId) o.selected=true;
-        g.appendChild(o);
-      });
       sel.appendChild(g);
     });
   });
@@ -968,15 +1116,18 @@ function openSlotEdit(i){
       +(m===mat?'background:var(--accent);color:#fff':'background:var(--raised);color:var(--txt2)')+'">'+m+'</button>';
   }).join('');
   // OrcaSlicer-Profil-Dropdown: aktuellen User-Override für diesen Slot
-  // aus /kx/filament/slots holen (enthält filament_id+filament_vendor).
+  // aus /kx/filament/slots holen (enthält vendor+name+id).
-  // Mit dem material-Filter (PLA→PLA*) wird die Liste auf passende Profile reduziert.
   fetch(_apiUrl('/kx/filament/slots')).then(function(r){return r.json();}).then(function(d){
     var arr=d.result||[];
     var entry=arr.find(function(x){return x.slot_index===globalIdx;})||{};
     window._slotProfileMap=window._slotProfileMap||{};
-    window._slotProfileMap[globalIdx]={id:entry.filament_id||'',vendor:entry.filament_vendor||''};
+    window._slotProfileMap[globalIdx]={
-    _fillSlotProfileDropdown(mat, entry.filament_id||'');
+      id:    entry.filament_id||'',
-  }).catch(function(){ _fillSlotProfileDropdown(mat,''); });
+      vendor:entry.filament_vendor||'',
+      name:  entry.filament_name||'',
+    };
+    _fillSlotProfileDropdown(mat, entry.filament_vendor||'', entry.filament_name||'');
+  }).catch(function(){ _fillSlotProfileDropdown(mat,'',''); });
   updateSlotEditFeedButton();
   document.getElementById('slot-edit-modal').classList.add('open');
 }
@@ -1023,7 +1174,7 @@ function selectMatPreset(m){
   highlightMatBtn(m);
   // Filament-Profile-Dropdown an neues Material anpassen
   // (vorherige Selektion zurücksetzen — andere Material-Profile passen nicht)
-  _fillSlotProfileDropdown(m, '');
+  _fillSlotProfileDropdown(m, '', '');
 }
 function highlightMatBtn(val){
   document.querySelectorAll('.mat-preset-btn').forEach(function(b){
@@ -1032,7 +1183,7 @@ function highlightMatBtn(val){
     b.style.color=on?'#fff':'var(--txt2)';
   });
   // Auch bei manueller Eingabe ins Material-Textfeld: Dropdown refreshen.
-  if(val) _fillSlotProfileDropdown(val, '');
+  if(val) _fillSlotProfileDropdown(val, '', '');
 }
 function hexToRgb(hex){
   var r=parseInt(hex.slice(1,3),16),g=parseInt(hex.slice(3,5),16),b=parseInt(hex.slice(5,7),16);
@@ -1043,31 +1194,59 @@ function saveSlotEdit(){
   var mat=document.getElementById('slot-edit-mat').value.trim().toUpperCase()||'PLA';
   var color=hexToRgb(hex);
   var slotIdx=_slotEditIndex;
-  // OrcaSlicer-Profil-Override: parallel persistieren (Profile bleiben auch
-  // erhalten wenn der User nur Farbe/Material ändert)
   var profSel=document.getElementById('slot-edit-profile');
-  var newProfId=profSel?profSel.value:'';
+  var sel=profSel && profSel.selectedOptions && profSel.selectedOptions[0];
-  var newProfVendor='';
+  // Primärer Selector: (vendor, name). id ist nur Hint (aus dem JSON-data-attr
-  if(profSel && profSel.selectedOptions && profSel.selectedOptions[0]){
+  // mitgegeben — Backend lookt sie nochmal selber nach um veraltete Hints zu
-    newProfVendor=profSel.selectedOptions[0].dataset.vendor||'';
+  // korrigieren).
-  }
+  var newProfVendor=sel?(sel.dataset.vendor||''):'';
+  var newProfName  =sel?(sel.dataset.name  ||''):'';
+  var newProfId    =sel?(sel.dataset.id    ||''):'';
+  // Sequenziell speichern: erst Profil-Override (config.ini), dann Material/Farbe
+  // (MQTT zum Drucker). Sonst können beide Pfade sich überholen und der Slot-State
+  // ist beim nächsten Re-Open inkonsistent.
   fetch(_apiUrl('/kx/filament/slots/'+slotIdx+'/profile'),{
     method:'POST',
     headers:{'Content-Type':'application/json'},
-    body:JSON.stringify({id:newProfId,vendor:newProfVendor})
+    body:JSON.stringify({vendor:newProfVendor, name:newProfName, id:newProfId})
-  }).then(function(r){return r.json();}).then(function(){
+  })
+  .then(function(r){return r.json();})
+  .then(function(){
     window._slotProfileMap=window._slotProfileMap||{};
-    if(newProfId){ window._slotProfileMap[slotIdx]={id:newProfId,vendor:newProfVendor}; }
+    if(newProfVendor && newProfName){
-    else delete window._slotProfileMap[slotIdx];
+      window._slotProfileMap[slotIdx]={id:newProfId, vendor:newProfVendor, name:newProfName};
-  }).catch(function(e){clog('Profil-Speichern fehlgeschlagen: '+e,'msg-err');});
+    } else {
-  post('/api/ams/set_slot',{index:slotIdx,type:mat,color:color})
+      delete window._slotProfileMap[slotIdx];
-    .then(function(r){return r.json();})
+    }
-    .then(function(r){
+    return post('/api/ams/set_slot',{index:slotIdx,type:mat,color:color});
-      closeSlotEdit();
+  })
-      var profSuffix=newProfId?(' ['+newProfId+']'):'';
+  .then(function(r){return r?r.json():null;})
-      clog(tr('slot_edit_ok')+' '+(slotIdx+1)+': '+mat+' '+hex+profSuffix,'msg-ok');
+  .then(function(){
-    })
+    // Slot-Map refreshen damit die Karte sofort den Vendor zeigt.
-    .catch(function(e){clog('Fehler: '+e,'msg-err');});
+    return fetch(_apiUrl('/kx/filament/slots')).then(function(r){return r.json();});
+  })
+  .then(function(d){
+    var arr=(d && d.result)||[];
+    window._slotProfileMap={};
+    arr.forEach(function(e){
+      if(e.filament_vendor && e.filament_name){
+        window._slotProfileMap[e.slot_index]={
+          id:    e.filament_id||'',
+          vendor:e.filament_vendor,
+          name:  e.filament_name,
+        };
+      }
+    });
+    closeSlotEdit();
+    var profSuffix=newProfName?(' ['+newProfVendor+' '+newProfName+']'):'';
+    clog(tr('slot_edit_ok')+' '+(slotIdx+1)+': '+mat+' '+hex+profSuffix,'msg-ok');
+    // Sofortiges Re-Render mit aktuellem _slotProfileMap (poll() ist async
+    // und re-rendert beim nächsten Tick — wir wollen aber dass die Vendor-
+    // Badge JETZT direkt sichtbar wird).
+    if(typeof applyState==='function') applyState();
+    if(typeof poll==='function') poll();
+  })
+  .catch(function(e){clog('Fehler: '+e,'msg-err');});
 }
 document.addEventListener('DOMContentLoaded',function(){
   document.getElementById('s-printer-ip').addEventListener('input',function(){
@@ -1164,6 +1343,21 @@ var pollTimer;
 (function(){
   var ms=parseInt(localStorage.getItem('pollInterval')||'2000');
   initPrinters();
+  // Slot-Profile-Map initial laden, sonst zeigen die Karten beim ersten
+  // Render keine Vendor-Badge obwohl in der config.ini ein Override steht.
+  fetch(_apiUrl('/kx/filament/slots')).then(function(r){return r.json();}).then(function(d){
+    var arr=(d && d.result)||[];
+    window._slotProfileMap={};
+    arr.forEach(function(e){
+      if(e.filament_vendor && e.filament_name){
+        window._slotProfileMap[e.slot_index]={
+          id:    e.filament_id||'',
+          vendor:e.filament_vendor,
+          name:  e.filament_name,
+        };
+      }
+    });
+  }).catch(function(){});
   poll();pollTimer=setInterval(poll,ms);
 })();
 
@@ -1172,7 +1366,28 @@ function printAction(a){
   post('/printer/print/'+a,{}).then(function(){clog('Druck: '+a,'msg-ok');poll()})
     .catch(function(e){clog('Fehler: '+e,'msg-err')});
 }
-function confirmCancel(){if(confirm('Druck wirklich abbrechen?'))printAction('cancel')}
+function togglePauseResume(){
+  // Druckt → pause; Pausiert → resume. Status kommt aus dem zuletzt gepollten
+  // print_state in S; bei Unklarheit (kein State) Pause als Default.
+  var state=(S && S.print_state)||'';
+  if(state==='paused') printAction('resume');
+  else                 printAction('pause');
+}
+function updatePauseResumeBtn(){
+  var btn=document.getElementById('d-btn-pause');
+  if(!btn) return;
+  var state=(S && S.print_state)||'';
+  if(state==='paused'){
+    btn.textContent=T.btn_resume||'▶ Weiter';
+    btn.classList.add('btn-resume');
+    btn.classList.remove('btn-pause');
+  } else {
+    btn.textContent=T.btn_pause||'⏸ Pause';
+    btn.classList.add('btn-pause');
+    btn.classList.remove('btn-resume');
+  }
+}
+function confirmCancel(){if(confirm(T.confirm_cancel||'Druck wirklich abbrechen?'))printAction('cancel')}
 
 // ── Axis motion ──
 // axis codes: 0=X, 1=Y, 2=Z
@@ -1230,7 +1445,8 @@ function setBed(){
 function setLight(){
   var on=document.getElementById('d-light-toggle').checked;
   post('/api/light',{on:on,brightness:80})
-    .then(function(){clog('Licht '+(on?'an, '+br+'%':'aus'),'msg-ok')})
+    .then(function(){clog('Licht '+(on?'an, 80%':'aus'),'msg-ok')})
+
     .catch(function(e){clog('Licht-Fehler: '+e,'msg-err')});
 }
 
@@ -1311,11 +1527,13 @@ function camStart(){
 
 function camStop(){
   var img=document.getElementById('cam-img');
+  img.onerror=null; // deregister error handler before clearing src to avoid spurious error toast
   post('/api/camera/stop',{}).catch(function(){});
   img.src='';
   img.style.display='none';
   document.getElementById('cam-placeholder').style.display='flex';
   camOn=false;
+  camUserStopped=true; // suppress auto-restart for remainder of this print
   document.getElementById('cam-toggle-btn').textContent=tr('btn_cam_start');
   clog(tr('log_cam_stop'),'msg-ok');
 }

web/themes/default/index.html

@@ -38,6 +38,7 @@
       <option value="de">Deutsch</option>
       <option value="en">English</option>
       <option value="es">Espanol</option>
+      <option value="fr">Français</option>
       <option value="zh-cn">中文(简体)</option>
     </select>
   </div>
@@ -121,6 +122,19 @@
       </div>
     </div>
 
+    <!-- OrcaSlicer-Profile (Custom-Profile-Import, Issue #41) -->
+    <div>
+      <div class="modal-section" id="modal-sec-orca-profiles">OrcaSlicer-Profile</div>
+      <div style="font-size:11px;color:var(--txt2);margin-bottom:8px" id="orca-profiles-hint">
+        Eigene Profile aus OrcaSlicer importieren (User-Dir öffnen via Help → Show Configuration Folder)
+      </div>
+      <div id="orca-profiles-list" style="margin-bottom:8px;font-size:12px;color:var(--txt2)"></div>
+      <button class="btn btn-sm" id="btn-orca-profiles-import" onclick="openProfileImport()"
+        style="background:var(--raised);color:var(--txt)">
+        ⬆ <span id="lbl-orca-profiles-import">Profile importieren</span>
+      </button>
+    </div>
+
     <div>
       <div class="modal-section" id="modal-sec-version">Version</div>
       <div class="update-row">
@@ -170,12 +184,42 @@
         <option value="" id="slot-profile-default-opt"></option>
       </select>
       <div style="font-size:11px;color:var(--txt2);margin-top:4px" id="slot-profile-hint"></div>
+      <a href="#" onclick="event.preventDefault();openProfileImport()"
+        style="display:inline-block;margin-top:6px;font-size:11px;color:var(--accent);text-decoration:none"
+        id="lbl-slot-profile-import">★ Eigene Profile importieren…</a>
     </div>
     <button class="btn" id="btn-slot-edit-feed" style="width:100%;margin-bottom:8px" onclick="slotEditFeed()"></button>
     <button class="modal-save" id="btn-slot-edit-save" onclick="saveSlotEdit()"></button>
   </div>
 </div>
 
+<!-- ═══ ORCA-PROFILE-IMPORT-DIALOG (Issue #41) ═══ -->
+<div class="modal-overlay" id="profile-import-modal" onclick="if(event.target===this)closeProfileImport()">
+  <div class="modal-box" style="max-width:480px">
+    <div style="display:flex;justify-content:space-between;align-items:center;margin-bottom:16px">
+      <div style="font-size:16px;font-weight:600" id="profile-import-title">Eigene OrcaSlicer-Profile importieren</div>
+      <button onclick="closeProfileImport()" style="background:none;border:none;color:var(--txt2);font-size:20px;cursor:pointer">×</button>
+    </div>
+    <div style="font-size:12px;color:var(--txt2);margin-bottom:12px;line-height:1.5" id="profile-import-help">
+      Lade ein <b>ZIP</b> deines OrcaSlicer-Filament-Ordners oder einzelne <b>.json</b>-Files hoch.<br>
+      In OrcaSlicer: <i>Help → Show Configuration Folder → user/&lt;id&gt;/filament/</i>
+    </div>
+    <div id="profile-import-drop" style="border:2px dashed var(--border);border-radius:8px;padding:24px;text-align:center;cursor:pointer;margin-bottom:12px"
+      ondragover="event.preventDefault();this.style.borderColor='var(--accent)'"
+      ondragleave="this.style.borderColor='var(--border)'"
+      ondrop="event.preventDefault();this.style.borderColor='var(--border)';doProfileImportUpload(event.dataTransfer.files)"
+      onclick="document.getElementById('profile-import-file').click()">
+      <div style="font-size:32px;margin-bottom:8px">⬆</div>
+      <div style="font-size:13px;color:var(--txt2)" id="profile-import-dropmsg">Hierher ziehen oder klicken</div>
+      <input type="file" id="profile-import-file" accept=".zip,.json" multiple
+        style="display:none" onchange="doProfileImportUpload(this.files);this.value=''">
+    </div>
+    <div id="profile-import-status" style="font-size:12px;margin-bottom:12px;min-height:18px"></div>
+    <div style="font-size:11px;color:var(--txt2);margin-bottom:6px" id="profile-import-list-label">Aktuell importiert</div>
+    <div id="profile-import-list" style="max-height:240px;overflow-y:auto;font-size:12px"></div>
+  </div>
+</div>
+
 <div class="layout">
   <nav class="sidebar">
     <button class="nav-btn active" onclick="showPanel('dashboard')" id="nb-dashboard">
@@ -223,9 +267,15 @@
           <div class="pct-big"><span id="d-pct">0</span><small>%</small></div>
           <div style="display:flex;align-items:center;gap:10px;margin:8px 0">
             <div class="progress-bar" style="flex:1;margin:0"><div class="progress-fill" id="d-pbar" style="width:0%"></div></div>
-            <div class="time-block" style="padding:6px 10px;min-width:72px;text-align:center;flex-shrink:0">
+            <div style="display:flex;flex-direction:column;gap:4px;flex-shrink:0">
-              <div class="time-label" id="d-lbl-layers"></div>
+              <div class="time-block" style="padding:6px 10px;min-width:72px;text-align:center">
-              <div class="time-val" style="font-size:16px" id="d-layers">–</div>
+                <div class="time-label" id="d-lbl-layers"></div>
+                <div class="time-val" style="font-size:16px" id="d-layers">–</div>
+              </div>
+              <div class="time-block" style="padding:4px 10px;min-width:72px;text-align:center">
+                <div class="time-label" id="d-lbl-zpos">Z</div>
+                <div class="time-val" style="font-size:13px" id="d-zpos">–</div>
+              </div>
             </div>
           </div>
           <div class="time-grid">
@@ -243,9 +293,8 @@
             </div>
           </div>
           <div class="fname" id="d-fname" title="" style="margin-top:6px">–</div>
-          <div class="ctrl-btns" id="d-ctrl-btns" style="margin-top:12px">
+          <div class="ctrl-btns" id="d-ctrl-btns" style="margin-top:12px;display:none">
-            <button class="btn btn-pause btn-sm" id="d-btn-pause" onclick="printAction('pause')">⏸ Pause</button>
+            <button class="btn btn-pause btn-sm" id="d-btn-pause" onclick="togglePauseResume()">⏸ Pause</button>
-            <button class="btn btn-resume btn-sm" id="d-btn-resume" onclick="printAction('resume')">▶ Weiter</button>
             <button class="btn btn-skip btn-sm" id="d-btn-skip" onclick="openSkipDialog()" style="display:none">✂ <span id="d-btn-skip-label">Objekte</span></button>
             <button class="btn btn-cancel btn-sm" id="d-btn-cancel" onclick="confirmCancel()">✕ Stopp</button>
           </div>

web/translations/de.json

@@ -37,6 +37,7 @@
   "lbl_remaining": "Restzeit:",
   "lbl_slicer_time": "Slicer-Schätzung:",
   "lbl_layers": "Layer",
+  "lbl_zpos": "Z (mm)",
   "speed_silent": "🐢 Leise",
   "speed_normal": "⚡ Normal",
   "speed_sport": "🚀 Sport",
@@ -164,6 +165,19 @@
   "slot_edit_profile": "OrcaSlicer-Profil",
   "slot_edit_profile_hint": "Sendet beim OrcaSlicer-Sync die konkrete Marke statt nur „Generic\"",
   "slot_edit_profile_default": "— Generic (Default) —",
+  "orca_profile_section": "OrcaSlicer-Profile",
+  "orca_profile_hint": "Eigene Profile aus OrcaSlicer importieren (User-Dir öffnen via Help → Show Configuration Folder)",
+  "orca_profile_import_btn": "Profile importieren",
+  "orca_profile_import_link": "★ Eigene Profile importieren…",
+  "orca_profile_import_title": "Eigene OrcaSlicer-Profile importieren",
+  "orca_profile_help_html": "Lade ein <b>ZIP</b> deines OrcaSlicer-Filament-Ordners oder einzelne <b>.json</b>-Files hoch.<br>In OrcaSlicer: <i>Help → Show Configuration Folder → user/&lt;id&gt;/filament/</i>",
+  "orca_profile_dropmsg": "Hierher ziehen oder klicken",
+  "orca_profile_list_label": "Aktuell importiert",
+  "orca_profile_user_label": "Eigene Profile",
+  "orca_profile_user_empty": "– keine –",
+  "orca_profile_uploading": "Lade hoch…",
+  "orca_profile_done": "Importiert",
+  "orca_profile_skipped": "übersprungen",
   "log_dir_all": "Alle",
   "log_lvl_label": "Level:",
   "file_ready_btn": "▶ Druck starten",

web/translations/en.json

@@ -37,6 +37,7 @@
   "lbl_remaining": "Remaining:",
   "lbl_slicer_time": "Slicer estimate:",
   "lbl_layers": "Layer",
+  "lbl_zpos": "Z (mm)",
   "speed_silent": "🐢 Silent",
   "speed_normal": "⚡ Normal",
   "speed_sport": "🚀 Sport",
@@ -164,6 +165,19 @@
   "slot_edit_profile": "OrcaSlicer profile",
   "slot_edit_profile_hint": "Sent on OrcaSlicer sync as the specific brand instead of just \"Generic\"",
   "slot_edit_profile_default": "— Generic (default) —",
+  "orca_profile_section": "OrcaSlicer Profiles",
+  "orca_profile_hint": "Import your own OrcaSlicer filament profiles (open the user dir via Help → Show Configuration Folder)",
+  "orca_profile_import_btn": "Import profiles",
+  "orca_profile_import_link": "★ Import own profiles…",
+  "orca_profile_import_title": "Import your OrcaSlicer profiles",
+  "orca_profile_help_html": "Upload a <b>ZIP</b> of your OrcaSlicer filament folder or single <b>.json</b> files.<br>In OrcaSlicer: <i>Help → Show Configuration Folder → user/&lt;id&gt;/filament/</i>",
+  "orca_profile_dropmsg": "Drop here or click",
+  "orca_profile_list_label": "Currently imported",
+  "orca_profile_user_label": "Own profiles",
+  "orca_profile_user_empty": "– none –",
+  "orca_profile_uploading": "Uploading…",
+  "orca_profile_done": "Imported",
+  "orca_profile_skipped": "skipped",
   "log_dir_all": "All",
   "log_lvl_label": "Level:",
   "file_ready_btn": "▶ Start Print",

web/translations/es.json

@@ -20,9 +20,9 @@
   "kobra_finished": "Finalizado",
   "kobra_failed": "Error",
   "kobra_canceled": "Cancelado",
-  "kobra_offline": "Offline",
+  "kobra_offline": "Desconectada",
   "nav_dashboard": "Panel",
-  "nav_print": "Impresion",
+  "nav_print": "Impresión",
   "nav_temps": "Temperaturas",
   "nav_motion": "Movimiento",
   "nav_ams": "AMS",
@@ -31,12 +31,13 @@
   "card_progress": "Progreso",
   "card_temps": "Temperaturas",
   "card_light_fan": "Ventilador",
-  "card_speed": "Velocidad de impresion",
+  "card_speed": "Velocidad de impresión",
-  "card_cam": "Camara",
+  "card_cam": "Cámara",
   "lbl_elapsed": "Transcurrido:",
   "lbl_remaining": "Restante:",
-  "lbl_slicer_time": "Estimacion del slicer:",
+  "lbl_slicer_time": "Estimación del slicer:",
-  "lbl_layers": "Layer",
+  "lbl_layers": "Capa",
+  "lbl_zpos": "Z (mm)",
   "speed_silent": "🐢 Silencioso",
   "speed_normal": "⚡ Normal",
   "speed_sport": "🚀 Sport",
@@ -52,14 +53,14 @@
   "ace_dry_current_temp": "Temperatura",
   "ace_dry_chart": "Historial (Temp/Humedad)",
   "ace_dry_temp": "Temperatura (°C)",
-  "ace_dry_duration": "Duracion (min)",
+  "ace_dry_duration": "Duración (min)",
-  "ace_dry_start": "▶ Start",
+  "ace_dry_start": "▶ Iniciar",
-  "ace_dry_stop": "■ Stop",
+  "ace_dry_stop": "■ Parar",
-  "ace_dry_auto_refill": "Relleno automatico",
+  "ace_dry_auto_refill": "Relleno automático",
   "ace_dry_enable": "Activar secado",
   "ace_dry_temp_line": "Temperatura de secado",
   "ace_dry_time_line": "Tiempo de secado",
-  "ace_dry_ui_pending": "(solo UI, backend despues)",
+  "ace_dry_ui_pending": "(solo UI, backend después)",
   "ace_dry_dialog_title": "Ajustes de temp/tiempo del secador",
   "ace_dry_dialog_temp": "Temperatura (30-80°C)",
   "ace_dry_dialog_time": "Tiempo restante (h:m:s)",
@@ -67,12 +68,12 @@
   "ace_dry_dialog_cancel": "Cancelar",
   "ace_dry_dialog_save_restart": "Guardar y reiniciar",
   "ace_dry_dialog_custom_name": "Nombre personalizado",
-  "ace_dry_dialog_reset_default": "Restablecer por defecto",
+  "ace_dry_dialog_reset_default": "Restablecer valores predeterminados",
-  "cam_placeholder": "📷 Camara no iniciada",
+  "cam_placeholder": "📷 Cámara no iniciada",
   "cam_stream_unavailable": "Stream no disponible",
-  "btn_cam_start": "▶ Camara",
+  "btn_cam_start": "▶ Cámara",
-  "btn_cam_stop": "◼ Camara",
+  "btn_cam_stop": "◼ Cámara",
-  "btn_pause": "⏸ Pause",
+  "btn_pause": "⏸ Pausa",
   "btn_resume": "▶ Reanudar",
   "btn_cancel": "✕ Detener",
   "label_nozzle": "Boquilla",
@@ -81,20 +82,20 @@
   "label_light": "💡 Luz",
   "label_on_off": "Encendido / Apagado",
   "label_speed": "Velocidad",
-  "panel_print_title": "Control de impresion",
+  "panel_print_title": "Control de impresión",
-  "panel_print_btn_pause": "⏸ Pause",
+  "panel_print_btn_pause": "⏸ Pausa",
   "panel_print_btn_resume": "▶ Reanudar",
   "panel_print_btn_cancel": "✕ Cancelar",
   "panel_print_temps_live": "Temperaturas (en vivo)",
   "label_set": "Set",
-  "label_off": "Off",
+  "label_off": "Apagado",
   "panel_temps_nozzle": "Boquilla",
   "panel_temps_bed": "Cama caliente",
-  "panel_temps_chart": "Historial (ultimas 60 lecturas)",
+  "panel_temps_chart": "Historial (últimas 60 lecturas)",
   "label_target_c": "Objetivo:",
   "panel_motion_xy": "Ejes XY",
   "panel_motion_z": "Eje Z",
-  "label_step": "Tamano del paso:",
+  "label_step": "Tamaño del paso:",
   "btn_home_z": "Home Z",
   "btn_home_xy": "Home XY",
   "btn_home_all": "Home All",
@@ -103,11 +104,11 @@
   "card_ams": "Filamento",
   "ams_no_data": "No se recibieron datos de AMS",
   "label_slot": "Ranura",
-  "ams_empty": "Vacio",
+  "ams_empty": "Vacío",
   "panel_extras_light": "Luz",
   "panel_extras_fan": "Ventilador",
-  "panel_extras_camera": "Camara",
+  "panel_extras_camera": "Cámara",
-  "btn_cam_start2": "▶ Start",
+  "btn_cam_start2": "▶ Iniciar",
   "btn_cam_stop2": "◼ Detener",
   "panel_console_title": "Registro de eventos",
   "log_light_on": "Luz encendida",
@@ -118,29 +119,29 @@
   "log_axis": "Eje",
   "log_home": "Home",
   "log_home_all": "Home All",
-  "log_cam_start": "Camara iniciada:",
+  "log_cam_start": "Cámara iniciada:",
-  "log_cam_stop": "Camara detenida",
+  "log_cam_stop": "Cámara detenida",
   "log_poll_error": "Error de sondeo:",
   "log_error": "Error:",
-  "confirm_cancel": "Realmente cancelar la impresion?",
+  "confirm_cancel": "¿Realmente cancelar la impresión?",
-  "settings_title": "Configuracion",
+  "settings_title": "Configuración",
-  "settings_connection": "Conexion",
+  "settings_connection": "Conexión",
-  "settings_print": "Ajustes de impresion",
+  "settings_print": "Ajustes de impresión",
   "settings_poll": "Intervalo de sondeo",
-  "settings_version": "Version",
+  "settings_version": "Versión",
   "settings_save": "Guardar y reiniciar",
   "settings_printer_name": "Nombre de impresora",
   "settings_printer_ip": "IP de impresora",
   "settings_mqtt_port": "MQTT Port",
   "settings_username": "Usuario MQTT",
-  "settings_password": "Contrasena MQTT",
+  "settings_password": "Contraseña MQTT",
   "settings_device_id": "ID del dispositivo",
-  "settings_mode_id": "Mode ID",
+  "settings_mode_id": "ID de modo",
-  "hint_ip_no_port": "Solo direccion IP, sin puerto (p. ej. 192.168.1.102)",
+  "hint_ip_no_port": "Solo dirección IP, sin puerto (p. ej. 192.168.1.102)",
   "settings_default_slot": "Ranura predeterminada (un color)",
   "settings_slot_auto": "Auto (todos los slots cargados)",
   "settings_auto_leveling": "Autonivelado antes de imprimir",
-  "settings_camera_on_print": "Encender camara al iniciar impresion",
+  "settings_camera_on_print": "Encender cámara al iniciar impresión",
   "settings_web_upload_warning": "Mostrar advertencia al imprimir subidas web",
   "update_check": "Buscar actualizaciones",
   "update_checking": "Comprobando...",
@@ -152,7 +153,7 @@
   "update_error": "Error",
   "btn_connect": "⚡ Conectar",
   "btn_disconnect": "✕ Desconectar",
-  "lbl_conn_error": "Error de conexion:",
+  "lbl_conn_error": "Error de conexión:",
   "slot_edit_title": "Editar slot",
   "slot_edit_color": "Color",
   "slot_edit_material": "Material",
@@ -164,62 +165,75 @@
   "slot_edit_profile": "Perfil de OrcaSlicer",
   "slot_edit_profile_hint": "Envía al sincronizar con OrcaSlicer la marca concreta en lugar de solo \"Generic\"",
   "slot_edit_profile_default": "— Genérico (Predeterminado) —",
+  "orca_profile_section": "Perfiles de OrcaSlicer",
+  "orca_profile_hint": "Importa tus propios perfiles de filamento de OrcaSlicer (abre el directorio del usuario vía Help → Show Configuration Folder)",
+  "orca_profile_import_btn": "Importar perfiles",
+  "orca_profile_import_link": "★ Importar perfiles propios…",
+  "orca_profile_import_title": "Importar tus perfiles de OrcaSlicer",
+  "orca_profile_help_html": "Sube un <b>ZIP</b> de tu carpeta de filamentos de OrcaSlicer o archivos <b>.json</b> sueltos.<br>En OrcaSlicer: <i>Help → Show Configuration Folder → user/&lt;id&gt;/filament/</i>",
+  "orca_profile_dropmsg": "Suelta aquí o haz clic",
+  "orca_profile_list_label": "Actualmente importados",
+  "orca_profile_user_label": "Perfiles propios",
+  "orca_profile_user_empty": "– ninguno –",
+  "orca_profile_uploading": "Subiendo…",
+  "orca_profile_done": "Importado",
+  "orca_profile_skipped": "omitido",
   "log_dir_all": "Todos",
-  "log_lvl_label": "Level:",
+  "log_lvl_label": "Nivel:",
-  "file_ready_btn": "▶ Iniciar impresion",
+  "file_ready_btn": "▶ Iniciar impresión",
   "file_slots_btn": "🎨 Seleccionar ranuras",
   "file_cancel_btn": "✕ Cancelar",
   "nav_printers": "Impresoras",
   "skip_title": "✂ Omitir objetos",
-  "skip_hint": "Desmarca objetos que ya no quieras imprimir:",
+  "skip_hint": "Deselecciona los objetos que ya no quieras imprimir:",
   "skip_btn_label": "Objetos",
-  "skip_no_objects": "No hay objetos en esta impresion.",
+  "skip_no_objects": "No hay objetos en esta impresión.",
   "skip_already": "omitido",
-  "skip_select_at_least_one": "Elige al menos un objeto.",
+  "skip_select_at_least_one": "Selecciona al menos un objeto.",
   "skip_sending": "Enviando …",
-  "skip_success": "Se omitiran los objetos.",
+  "skip_success": "Se omitirán los objetos.",
   "fd_objects_hint": "Omitir objetos (opcional):",
   "fd_slots_hint": "Asignar canal GCode a la ranura AMS:",
   "fd_cancel": "Cancelar",
   "fd_print": "▶ Imprimir",
-  "fd_no_slots_msg": "No hay slots AMS cargados.{br}Iniciar impresion de todos modos?",
+  "fd_no_slots_msg": "No hay slots AMS cargados.{br}¿Iniciar impresión de todos modos?",
   "fd_slot": "Ranura",
   "fd_no_matching_material": "No hay material compatible",
   "fd_used": "USADO",
-  "add_printer": "Agregar impresora",
+  "add_printer": "Añadir impresora",
   "apd_lbl_ip": "IP de impresora",
   "apd_lbl_name": "Nombre (opcional)",
   "apd_placeholder_name": "p. ej. Kobra X Sala",
   "apd_cancel": "Cancelar",
-  "apd_confirm": "Agregar",
+  "apd_confirm": "Añadir",
   "apd_fetching": "Obteniendo datos de la impresora…",
-  "apd_success": "Impresora agregada, reiniciando bridge…",
+  "apd_success": "Impresora añadida, reiniciando bridge…",
-  "apd_err_ip": "Introduce una direccion IP",
+  "apd_err_ip": "Introduce una dirección IP",
   "printers_remove": "Eliminar impresora",
-  "printers_remove_confirm": "Eliminar impresora \"{name}\"? El bridge se reiniciara.",
+  "printers_remove_confirm": "¿Eliminar impresora \"{name}\"? El bridge se reiniciará.",
   "printers_active": "● activa",
   "printers_switch": "Cambiar →",
   "printers_current": "Impresora actual",
   "printers_loading": "Cargando…",
   "printers_none": "No hay impresoras configuradas.",
-  "printers_empty_hint": "Aun no hay impresora configurada.",
+  "printers_empty_hint": "Aún no hay impresora configurada.",
   "nav_browser": "Explorador",
   "panel_browser_title": "Explorador de archivos",
   "store_search_placeholder": "🔍 Buscar…",
-  "store_empty": "Aun no hay archivos subidos.",
+  "store_empty": "Aún no hay archivos subidos.",
   "store_refresh": "↻ Actualizar",
   "store_print": "▶ Imprimir",
   "store_download": "⬇ Descargar",
-  "store_delete_confirm": "Eliminar archivo?",
+  "store_delete_confirm": "¿Eliminar archivo?",
-  "store_print_confirm": "Imprimir archivo?",
+  "store_print_confirm": "¿Imprimir archivo?",
   "store_web_verify_title": "Verificar archivo",
   "store_web_verify_msg": "Verifica que este archivo fue creado para Anycubic Kobra X.",
   "store_web_verify_confirm": "Confirmar",
   "store_web_verify_abort": "Abortar",
   "store_no_results": "No se encontraron archivos.",
   "store_never": "nunca impreso",
-  "store_estimate": "Estimacion",
+  "store_estimate": "Estimación",
-  "store_upload_label_prefix": "Arrastra GCode aqui o ",
+  "store_upload_label_prefix": "Arrastra el GCode aquí o ",
   "store_upload_label_browse": "buscar",
   "store_upload_busy": "⏳ Subiendo…",
   "store_upload_success": "✓ {file}",
@@ -230,5 +244,5 @@
   "sf_new": "Nuevo",
   "ss_date": "↓ Fecha",
   "ss_name": "A–Z Nombre",
-  "ss_dur": "⏱ Tiempo de impresion"
+  "ss_dur": "⏱ Tiempo de impresión"
 }

web/translations/fr.json

@@ -0,0 +1,249 @@
+{
+  "header_status_standby": "Prêt",
+  "header_status_printing": "Impression",
+  "header_status_complete": "Terminé",
+  "header_status_error": "Erreur",
+  "kobra_free": "Disponible",
+  "kobra_busy": "Occupé",
+  "kobra_printing": "Impression",
+  "kobra_preheating": "Préchauffage",
+  "kobra_auto_leveling": "Mise à niveau auto",
+  "kobra_checking": "Vérification",
+  "kobra_updated": "Mise à jour",
+  "kobra_init": "Initialisation",
+  "kobra_pausing": "Pause en cours…",
+  "kobra_paused": "En pause",
+  "kobra_resuming": "Reprise en cours…",
+  "kobra_resumed": "Repris",
+  "kobra_stopping": "Arrêt en cours…",
+  "kobra_stoped": "Arrêté",
+  "kobra_finished": "Terminé",
+  "kobra_failed": "Erreur",
+  "kobra_canceled": "Annulé",
+  "kobra_offline": "Hors ligne",
+  "nav_dashboard": "Tableau de bord",
+  "nav_print": "Impression",
+  "nav_temps": "Températures",
+  "nav_motion": "Mouvement",
+  "nav_ams": "AMS",
+  "nav_extras": "Lumière / Ventilateur",
+  "nav_console": "Console",
+  "card_progress": "Progression",
+  "card_temps": "Températures",
+  "card_light_fan": "Ventilateur",
+  "card_speed": "Vitesse d'impression",
+  "card_cam": "Caméra",
+  "lbl_elapsed": "Écoulé :",
+  "lbl_remaining": "Restant :",
+  "lbl_slicer_time": "Estimation slicer :",
+  "lbl_layers": "Couche",
+  "lbl_zpos": "Z (mm)",
+  "speed_silent": "🐢 Silencieux",
+  "speed_normal": "⚡ Normal",
+  "speed_sport": "🚀 Sport",
+  "lbl_light": "💡 Lumière",
+  "lbl_feed": "Charger",
+  "lbl_unload": "Décharger",
+  "card_ace_dry": "Séchage ACE",
+  "ace_dry_dryer": "Séchoir",
+  "ace_dry_status_off": "Statut : Arrêté",
+  "ace_dry_status_on": "Statut : Actif",
+  "ace_dry_status_remaining": "Restant",
+  "ace_dry_humidity": "Humidité",
+  "ace_dry_current_temp": "Température",
+  "ace_dry_chart": "Historique (Temp/Humidité)",
+  "ace_dry_temp": "Température (°C)",
+  "ace_dry_duration": "Durée (min)",
+  "ace_dry_start": "▶ Démarrer",
+  "ace_dry_stop": "■ Arrêter",
+  "ace_dry_auto_refill": "Remplissage auto",
+  "ace_dry_enable": "Activer le séchage",
+  "ace_dry_temp_line": "Température de séchage",
+  "ace_dry_time_line": "Durée de séchage",
+  "ace_dry_ui_pending": "(Interface seule, backend suivant)",
+  "ace_dry_dialog_title": "Réglages Temp/Durée du séchoir",
+  "ace_dry_dialog_temp": "Température (30-80°C)",
+  "ace_dry_dialog_time": "Temps restant (h:m:s)",
+  "ace_dry_dialog_confirm": "Confirmer",
+  "ace_dry_dialog_cancel": "Annuler",
+  "ace_dry_dialog_save_restart": "Enregistrer et redémarrer",
+  "ace_dry_dialog_custom_name": "Nom personnalisé",
+  "ace_dry_dialog_reset_default": "Réinitialiser",
+  "cam_placeholder": "📷 Caméra non démarrée",
+  "cam_stream_unavailable": "Flux indisponible",
+  "btn_cam_start": "▶ Caméra",
+  "btn_cam_stop": "◼ Caméra",
+  "btn_pause": "⏸ Pause",
+  "btn_resume": "▶ Reprendre",
+  "btn_cancel": "✕ Arrêter",
+  "label_nozzle": "Buse",
+  "label_bed": "Plateau",
+  "label_fan": "🌀 Ventilateur",
+  "label_light": "💡 Lumière",
+  "label_on_off": "On / Off",
+  "label_speed": "Vitesse",
+  "panel_print_title": "Contrôle impression",
+  "panel_print_btn_pause": "⏸ Pause",
+  "panel_print_btn_resume": "▶ Reprendre",
+  "panel_print_btn_cancel": "✕ Annuler",
+  "panel_print_temps_live": "Températures (en direct)",
+  "label_set": "Définir",
+  "label_off": "Éteint",
+  "panel_temps_nozzle": "Buse",
+  "panel_temps_bed": "Plateau chauffant",
+  "panel_temps_chart": "Historique (60 dernières valeurs)",
+  "label_target_c": "Cible :",
+  "panel_motion_xy": "Axes XY",
+  "panel_motion_z": "Axe Z",
+  "label_step": "Pas :",
+  "btn_home_z": "Origine Z",
+  "btn_home_xy": "Origine XY",
+  "btn_home_all": "Origine Tout",
+  "btn_disable_motors": "Moteurs Off",
+  "panel_ams_title": "Filament",
+  "card_ams": "Filament",
+  "ams_no_data": "Aucune donnée AMS reçue",
+  "label_slot": "Slot",
+  "ams_empty": "Vide",
+  "panel_extras_light": "Lumière",
+  "panel_extras_fan": "Ventilateur",
+  "panel_extras_camera": "Caméra",
+  "btn_cam_start2": "▶ Démarrer",
+  "btn_cam_stop2": "◼ Arrêter",
+  "panel_console_title": "Journal d'événements",
+  "log_light_on": "Lumière allumée",
+  "log_light_off": "Lumière éteinte",
+  "log_fan": "Ventilateur →",
+  "log_nozzle": "Buse →",
+  "log_bed": "Plateau →",
+  "log_axis": "Axe",
+  "log_home": "Origine",
+  "log_home_all": "Origine Tout",
+  "log_cam_start": "Caméra démarrée :",
+  "log_cam_stop": "Caméra arrêtée",
+  "log_poll_error": "Erreur de sondage :",
+  "log_error": "Erreur :",
+  "confirm_cancel": "Vraiment annuler l'impression ?",
+  "settings_title": "Paramètres",
+  "settings_connection": "Connexion",
+  "settings_print": "Paramètres d'impression",
+  "settings_poll": "Intervalle de sondage",
+  "settings_version": "Version",
+  "settings_save": "Enregistrer et redémarrer",
+  "settings_printer_name": "Nom de l'imprimante",
+  "settings_printer_ip": "IP de l'imprimante",
+  "settings_mqtt_port": "Port MQTT",
+  "settings_username": "Nom d'utilisateur MQTT",
+  "settings_password": "Mot de passe MQTT",
+  "settings_device_id": "ID de l'appareil",
+  "settings_mode_id": "ID du mode",
+  "hint_ip_no_port": "Adresse IP uniquement, sans port (ex. 192.168.1.102)",
+  "settings_default_slot": "Slot par défaut (couleur unique)",
+  "settings_slot_auto": "Auto (tous les slots chargés)",
+  "settings_auto_leveling": "Mise à niveau auto avant impression",
+  "settings_camera_on_print": "Activer la caméra au démarrage de l'impression",
+  "settings_web_upload_warning": "Afficher un avertissement lors de l'impression de fichiers web",
+  "update_check": "Vérifier les mises à jour",
+  "update_checking": "Vérification…",
+  "update_available": "disponible",
+  "update_none": "Déjà à jour",
+  "update_apply": "Installer maintenant",
+  "update_applying": "Téléchargement…",
+  "update_restarting": "Redémarrage…",
+  "update_error": "Erreur",
+  "btn_connect": "⚡ Connecter",
+  "btn_disconnect": "✕ Déconnecter",
+  "lbl_conn_error": "Erreur de connexion :",
+  "slot_edit_title": "Modifier le slot",
+  "slot_edit_color": "Couleur",
+  "slot_edit_material": "Matériau",
+  "slot_edit_load": "⬇ Charger",
+  "slot_edit_unload": "⬆ Décharger",
+  "slot_edit_save": "💾 Enregistrer",
+  "slot_edit_custom": "ex. PLA, PETG, ABS…",
+  "slot_edit_ok": "Slot AMS",
+  "slot_edit_profile": "Profil OrcaSlicer",
+  "slot_edit_profile_hint": "Envoyé lors de la synchronisation OrcaSlicer comme marque spécifique au lieu de \"Générique\"",
+  "slot_edit_profile_default": "— Générique (défaut) —",
+  "orca_profile_section": "Profils OrcaSlicer",
+  "orca_profile_hint": "Importez vos propres profils de filament OrcaSlicer (ouvrez le dossier utilisateur via Aide → Afficher le dossier de configuration)",
+  "orca_profile_import_btn": "Importer des profils",
+  "orca_profile_import_link": "★ Importer mes profils…",
+  "orca_profile_import_title": "Importer vos profils OrcaSlicer",
+  "orca_profile_help_html": "Déposez un <b>ZIP</b> de votre dossier filament OrcaSlicer ou des fichiers <b>.json</b> individuels.<br>Dans OrcaSlicer : <i>Aide → Afficher le dossier de configuration → user/&lt;id&gt;/filament/</i>",
+  "orca_profile_dropmsg": "Déposez ici ou cliquez",
+  "orca_profile_list_label": "Profils importés",
+  "orca_profile_user_label": "Mes profils",
+  "orca_profile_user_empty": "– aucun –",
+  "orca_profile_uploading": "Envoi en cours…",
+  "orca_profile_done": "Importé",
+  "orca_profile_skipped": "ignoré",
+  "log_dir_all": "Tout",
+  "log_lvl_label": "Niveau :",
+  "file_ready_btn": "▶ Lancer l'impression",
+  "file_slots_btn": "🎨 Choisir les slots",
+  "file_cancel_btn": "✕ Annuler",
+  "nav_printers": "Imprimantes",
+  "skip_title": "✂ Ignorer des objets",
+  "skip_hint": "Décochez les objets que vous ne souhaitez plus imprimer :",
+  "skip_btn_label": "Objets",
+  "skip_no_objects": "Aucun objet dans cette impression.",
+  "skip_already": "ignoré",
+  "skip_select_at_least_one": "Veuillez sélectionner au moins un objet.",
+  "skip_sending": "Envoi …",
+  "skip_success": "Les objets seront ignorés.",
+  "fd_objects_hint": "Ignorer des objets (optionnel) :",
+  "fd_slots_hint": "Associer le canal GCode au slot AMS :",
+  "fd_cancel": "Annuler",
+  "fd_print": "▶ Imprimer",
+  "fd_no_slots_msg": "Aucun slot AMS chargé.{br}Lancer l'impression quand même ?",
+  "fd_slot": "Slot",
+  "fd_no_matching_material": "Aucun matériau correspondant",
+  "fd_used": "UTILISÉ",
+  "add_printer": "Ajouter une imprimante",
+  "apd_lbl_ip": "IP de l'imprimante",
+  "apd_lbl_name": "Nom (optionnel)",
+  "apd_placeholder_name": "ex. Kobra X Salon",
+  "apd_cancel": "Annuler",
+  "apd_confirm": "Ajouter",
+  "apd_fetching": "Récupération des données de l'imprimante…",
+  "apd_success": "Imprimante ajoutée, redémarrage du bridge…",
+  "apd_err_ip": "Veuillez saisir une adresse IP",
+  "printers_remove": "Supprimer l'imprimante",
+  "printers_remove_confirm": "Supprimer l'imprimante \"{name}\" ? Le bridge va redémarrer.",
+  "printers_active": "● actif",
+  "printers_switch": "Changer →",
+  "printers_current": "Imprimante actuelle",
+  "printers_loading": "Chargement…",
+  "printers_none": "Aucune imprimante configurée.",
+  "printers_empty_hint": "Aucune imprimante configurée.",
+  "nav_browser": "Navigateur",
+  "panel_browser_title": "Explorateur de fichiers",
+  "store_search_placeholder": "🔍 Rechercher…",
+  "store_empty": "Aucun fichier uploadé.",
+  "store_refresh": "↻ Actualiser",
+  "store_print": "▶ Imprimer",
+  "store_download": "⬇ Télécharger",
+  "store_delete_confirm": "Supprimer le fichier ?",
+  "store_print_confirm": "Imprimer le fichier ?",
+  "store_web_verify_title": "Vérifier le fichier",
+  "store_web_verify_msg": "Veuillez vérifier que ce fichier a été créé pour l'Anycubic Kobra X.",
+  "store_web_verify_confirm": "Confirmer",
+  "store_web_verify_abort": "Annuler",
+  "store_no_results": "Aucun fichier trouvé.",
+  "store_never": "jamais imprimé",
+  "store_estimate": "Estimation",
+  "store_upload_label_prefix": "Déposez un GCode ici ou ",
+  "store_upload_label_browse": "parcourir",
+  "store_upload_busy": "⏳ Envoi en cours…",
+  "store_upload_success": "✓ {file}",
+  "store_upload_error": "✗ {error}",
+  "sf_all": "Tout",
+  "sf_ok": "✓ Terminés",
+  "sf_err": "✗ Échoués",
+  "sf_new": "Nouveau",
+  "ss_date": "↓ Date",
+  "ss_name": "A–Z Nom",
+  "ss_dur": "⏱ Durée d'impression"
+}
+

web/translations/zh-cn.json

@@ -37,6 +37,7 @@
   "lbl_remaining": "剩余时间:",
   "lbl_slicer_time": "切片预估:",
   "lbl_layers": "层",
+  "lbl_zpos": "Z (mm)",
   "speed_silent": "🐢 静音",
   "speed_normal": "⚡ 标准",
   "speed_sport": "🚀 运动",
@@ -164,6 +165,19 @@
   "slot_edit_profile": "OrcaSlicer 配置",
   "slot_edit_profile_hint": "在 OrcaSlicer 同步时发送具体品牌，而不仅仅是“Generic”",
   "slot_edit_profile_default": "— 通用 (默认) —",
+  "orca_profile_section": "OrcaSlicer 配置",
+  "orca_profile_hint": "导入你自己的 OrcaSlicer 耗材配置（在 Help → Show Configuration Folder 打开用户目录）",
+  "orca_profile_import_btn": "导入配置",
+  "orca_profile_import_link": "★ 导入自己的配置…",
+  "orca_profile_import_title": "导入你的 OrcaSlicer 配置",
+  "orca_profile_help_html": "上传 OrcaSlicer 耗材文件夹的 <b>ZIP</b> 或单个 <b>.json</b> 文件。<br>在 OrcaSlicer 中: <i>Help → Show Configuration Folder → user/&lt;id&gt;/filament/</i>",
+  "orca_profile_dropmsg": "拖到此处或点击",
+  "orca_profile_list_label": "已导入",
+  "orca_profile_user_label": "自己的配置",
+  "orca_profile_user_empty": "– 无 –",
+  "orca_profile_uploading": "上传中…",
+  "orca_profile_done": "已导入",
+  "orca_profile_skipped": "跳过",
   "log_dir_all": "全部",
   "log_lvl_label": "级别:",
   "file_ready_btn": "▶ 开始打印",