release: v0.9.7

Reviewed-on: #19

CHANGELOG.de.md

@@ -1,5 +1,43 @@
 # Changelog
 
+## [0.9.7] – 2026-05-08
+
+### Neu
+- **fetch_credentials-Tool:** Ruft MQTT-Credentials direkt vom Drucker per HTTP ab — kein laufender Anycubic Slicer nötig, nur die Drucker-IP. Linux-Binary und Windows-EXE im Release enthalten. (Beitrag von bebu, PR #19)
+
+### Fixes
+- **Upload großer GCode-Dateien:** Dateien >1 MB wurden mit HTTP 413 abgelehnt — aiohttp `client_max_size` auf 256 MB erhöht
+- **Upload-Timeout:** Socket-Timeout nach GCode-Upload von 10s auf 120s erhöht — große Dateien führten zu einem Absturz der Bridge mit leerer Antwort während der Drucker noch verarbeitete
+
+---
+
+## [0.9.6] – 2026-05-02
+
+### Neu
+- **Licht-Status-Synchronisierung:** Ein/Aus-Zustand und Helligkeit des Druckerlichts werden jetzt live über `light/report` MQTT gelesen — der Licht-Toggle in der UI spiegelt den echten Druckerstatus wider
+- **Zeit-Minicards:** Fortschritts-Panel zeigt jetzt drei Karten — Verstrichen, Restzeit und Slicer-Schätzung — sowie einen Layer-Badge neben dem Fortschrittsbalken
+- **Slicer-Schätzzeit aus GCode:** Geschätzte Druckzeit wird direkt aus der hochgeladenen GCode-Datei gelesen (OrcaSlicer: `; total estimated time:` am Dateiende, PrusaSlicer: `; estimated printing time` im Header)
+- **Erweiterte Druckerstatus-Strings:** `pausing`, `paused`, `resuming`, `resumed`, `stopping`, `stopped` hinzugefügt — fehlten bisher und ließen die UI rohe Status-Codes bei Pause/Fortsetzen/Stopp anzeigen
+
+### Fixes
+- **file_ready-Banner:** Upload-Banner wird nach Stopp oder Abbruch eines Drucks nicht mehr angezeigt
+- **Zeitanzeige bei Stopp/Abbruch:** Verstrichen-, Restzeit- und Slicer-Schätzung werden auf null zurückgesetzt wenn ein Druck gestoppt oder abgebrochen wird
+- **start.sh:** `config/`-Verzeichnis und `config.ini.example` werden beim ersten Start automatisch angelegt wenn sie fehlen (Issue #15)
+
+---
+
+## [0.9.5] – 2026-05-01
+
+### Neu
+- **Upload-Banner:** Nach „Nur hochladen" erscheint ein grüner Banner mit Dateiname — „▶ Druck starten" startet den Druck direkt, „✕ Abbrechen" schließt den Banner
+
+### Fixes
+- **Auto-Print:** `auto_print` wurde nach dem Multipart-Loop immer auf `False` zurückgesetzt — OrcaSlicer „Hochladen und drucken" startete den Druck nie automatisch
+- **Thumbnail:** Vorschaubild wird jetzt auch bei „Nur hochladen" angezeigt — Bridge fragt `fileDetails` direkt nach dem Upload an
+- **Log Auto-Scroll:** Scroll-Position bleibt erhalten wenn Auto-Scroll deaktiviert ist — kein ungewollter Sprung nach oben mehr
+
+---
+
 ## [0.9.4] – 2026-05-01
 
 ### Neu

CHANGELOG.md

@@ -1,5 +1,43 @@
 # Changelog
 
+## [0.9.7] – 2026-05-08
+
+### New
+- **fetch_credentials tool:** Fetches and decrypts MQTT credentials directly from the printer via HTTP — no running Anycubic Slicer required, only the printer IP needed. Linux binary and Windows EXE included in release. (Contributed by bebu, PR #19)
+
+### Fixes
+- **Large GCode upload:** Files >1 MB were rejected with HTTP 413 — aiohttp `client_max_size` raised to 256 MB
+- **Upload timeout:** Socket timeout after GCode upload raised from 10s to 120s — large files caused the bridge to crash with an empty response while the printer was still processing
+
+---
+
+## [0.9.6] – 2026-05-02
+
+### New
+- **Light status sync:** Light on/off state and brightness are now read live from the printer via `light/report` MQTT message — the light toggle in the UI reflects the actual printer state
+- **Time mini-cards:** Progress panel now shows three cards — Elapsed, Remaining and Slicer estimate — with a layer counter badge next to the progress bar
+- **Slicer estimate from GCode:** Estimated print time is parsed directly from the uploaded GCode file (OrcaSlicer: `; total estimated time:` at end of file, PrusaSlicer: `; estimated printing time` in header)
+- **Extended printer status strings:** Added `pausing`, `paused`, `resuming`, `resumed`, `stopping`, `stopped` states — previously missing, causing the UI to show raw status codes during pause/resume/stop transitions
+
+### Fixes
+- **file_ready banner:** Upload banner is no longer shown after print stop or cancel
+- **Timers on stop/cancel:** Elapsed, remaining and slicer estimate times are reset to zero when a print is stopped or cancelled
+- **start.sh:** `config/` directory and `config.ini.example` are now created automatically on first run if missing (Issue #15)
+
+---
+
+## [0.9.5] – 2026-05-01
+
+### New
+- **Upload banner:** After "Upload only", a green banner appears with the filename — "▶ Start Print" starts the print directly, "✕ Cancel" dismisses the banner
+
+### Fixes
+- **Auto-print:** `auto_print` was always reset to `False` after the multipart loop — OrcaSlicer "Upload and print" never started the print automatically
+- **Thumbnail:** Preview image is now shown after "Upload only" — bridge requests `fileDetails` immediately after upload
+- **Log auto-scroll:** Scroll position is preserved when auto-scroll is disabled — no more unwanted jump to top
+
+---
+
 ## [0.9.4] – 2026-05-01
 
 ### New

README.de.md

@@ -2,7 +2,7 @@
 
 # KX-Bridge – Anycubic Kobra X
 
-**Version:** 0.9.4
+**Version:** 0.9.7
 
 Steuere deinen **Anycubic Kobra X** mit OrcaSlicer — ohne Klipper, ohne Raspberry Pi.  
 KX-Bridge ist eine Moonraker-kompatible Bridge die direkt mit dem Drucker kommuniziert.
@@ -18,13 +18,23 @@ Den Kobra X in den LAN-Modus versetzen:
 
 ### Schritt 2 – Credentials holen
 
-Die MQTT-Zugangsdaten sind druckerspezifisch. So holst du sie:
+Die MQTT-Zugangsdaten sind druckerspezifisch und an die Hardware gebunden.
+
+**Option A – fetch_credentials (empfohlen):**
+
+```bash
+fetch_credentials --ip 192.168.x.x --write-config
+```
+
+Holt die Credentials direkt per HTTP vom Drucker und schreibt sie automatisch in `config/config.ini`. Benötigt nur die Drucker-IP — kein Slicer nötig.
+
+**Option B – extract_credentials (wenn Drucker-IP unbekannt):**
 
 1. **AnycubicSlicerNext** öffnen und Drucker verbinden (bis Status angezeigt wird)
-2. **`extract_credentials.exe`** (Windows) oder **`extract_credentials`** (Linux) ausführen — gibt Username, Password, Device-ID und Drucker-IP aus
+2. **`extract_credentials`** ausführen — gibt Username, Password, Device-ID und Drucker-IP aus
-3. Werte merken / kopieren
+3. Werte im Web-UI eintragen (⚙-Menü)
 
-> **Download:** [gitea.it-drui.de/viewit/KX-Bridge-Release/releases](https://gitea.it-drui.de/viewit/KX-Bridge-Release/releases) → `extract_credentials.exe` (Windows) / `extract_credentials` (Linux) im jeweiligen Release-Asset
+> **Download:** [gitea.it-drui.de/viewit/KX-Bridge-Release/releases](https://gitea.it-drui.de/viewit/KX-Bridge-Release/releases) → `fetch_credentials` / `extract_credentials` (Linux & Windows) im jeweiligen Release-Asset
 
 ### Schritt 3 – Bridge starten
 
@@ -36,7 +46,7 @@ Das Skript baut das Docker-Image automatisch beim ersten Aufruf.
 
 **Web-UI öffnen:** `http://BRIDGE-IP:7125`  
 → Das ⚙-Menü öffnet sich beim ersten Start automatisch  
-→ Credentials aus Schritt 2 eintragen → **Speichern & Neustart**
+→ Bei Option B: Credentials aus Schritt 2 eintragen → **Speichern & Neustart**
 
 **OrcaSlicer verbinden:**  
 Drucker → Verbindungstyp **Moonraker** → Host: `http://BRIDGE-IP:7125`
@@ -46,6 +56,12 @@ Drucker → Verbindungstyp **Moonraker** → Host: `http://BRIDGE-IP:7125`
 
 ---
 
+## 📺 Video Tutorial
+
+[![KX-Bridge Setup & Bedienung](https://img.youtube.com/vi/1Ql4wfH27fM/hqdefault.jpg)](https://www.youtube.com/watch?v=1Ql4wfH27fM)
+
+---
+
 ## ⚠️ Update von 0.9.1 oder älter
 
 Ab **0.9.2** speichert KX-Bridge Einstellungen in `config/config.ini` statt in `.env`.
@@ -110,7 +126,8 @@ docker-compose down
 ## Fehlerbehebung
 
 **„Falsche MQTT-Zugangsdaten"** beim Start:
-- AnycubicSlicerNext neu starten, Drucker verbinden, `extract_credentials` erneut ausführen
+- `fetch_credentials --ip <Drucker-IP> --write-config` erneut ausführen und Bridge neu starten
+- Wenn IP unbekannt: AnycubicSlicerNext neu starten, Drucker verbinden, `extract_credentials` erneut ausführen
 - Nur die IP-Adresse ins Feld eintragen, keinen Port (✗ `192.168.1.102:9883` → ✓ `192.168.1.102`)
 
 **Drucker nicht gefunden / kein LAN-Modus:**
@@ -135,3 +152,9 @@ sudo usermod -aG docker $USER  # dann neu einloggen
 ## Lizenz & Rechtliches
 
 Interoperabilitätsforschung gem. §69e UrhG — ausschließlich private, nicht-kommerzielle Nutzung.
+
+<p align="center">
+  <a href="https://ko-fi.com/viewitde">
+    <img src="https://ko-fi.com/img/githubbutton_sm.svg" alt="Ko-fi Support"/>
+  </a>
+</p>

README.md

@@ -2,7 +2,7 @@
 
 # KX-Bridge – Anycubic Kobra X
 
-**Version:** 0.9.4
+**Version:** 0.9.7
 
 Control your **Anycubic Kobra X** with OrcaSlicer — no Klipper, no Raspberry Pi.  
 KX-Bridge is a Moonraker-compatible bridge that communicates directly with the printer.
@@ -46,6 +46,12 @@ Printer → Connection type **Moonraker** → Host: `http://BRIDGE-IP:7125`
 
 ---
 
+## 📺 Video Tutorial
+
+[![KX-Bridge Setup & Usage](https://img.youtube.com/vi/1Ql4wfH27fM/hqdefault.jpg)](https://www.youtube.com/watch?v=1Ql4wfH27fM)
+
+---
+
 ## ⚠️ Upgrading from 0.9.1 or earlier
 
 Starting with **0.9.2**, KX-Bridge stores settings in `config/config.ini` instead of `.env`.
@@ -135,3 +141,9 @@ sudo usermod -aG docker $USER  # then log out and back in
 ## License
 
 Interoperability research under §69e UrhG — private, non-commercial use only.
+
+<p align="center">
+  <a href="https://ko-fi.com/viewitde">
+    <img src="https://ko-fi.com/img/githubbutton_sm.svg" alt="Ko-fi Support"/>
+  </a>
+</p>

VERSION

@@ -1 +1 @@
-0.9.4
+0.9.7

fetch_credentials.py

@@ -0,0 +1,397 @@
+#!/usr/bin/env python3
+"""
+fetch_credentials.py – Fetches and decrypts Anycubic Kobra X credentials via HTTP API.
+
+Original approach by bebu (PR #19, KX-Bridge-Release).
+Reverse engineered from the Vue project embedded in libWorkbench.so (Anycubic Slicer Next).
+No running slicer required — only the printer IP in LAN.
+
+Algorithm: AES-256-CBC
+  Key: token[16:32] from /info response
+  IV:  response token from /ctrl response
+
+Usage:
+    python3 fetch_credentials.py --ip 192.168.x.x
+    python3 fetch_credentials.py --ip 192.168.x.x --write-config
+    python3 fetch_credentials.py --ip 192.168.x.x --write-config --config-file ../config/config.ini
+    python3 fetch_credentials.py --ctrl ctrl.json --info info.json
+"""
+
+import json
+import sys
+import base64
+import hashlib
+import argparse
+import os
+import time
+import random
+import string
+import requests
+from pathlib import Path
+from Crypto.Cipher import AES
+from Crypto.Util.Padding import unpad
+
+
+def evp_bytes_to_key(password, salt, key_len, iv_len):
+    """
+    Derive key and IV from password and salt using OpenSSL EVP_BytesToKey
+    This mimics the CryptoJS default key derivation
+    """
+    m = []
+    i = 0
+    while len(b''.join(m)) < (key_len + iv_len):
+        md5 = hashlib.md5()
+        data = password + salt
+        if i > 0:
+            data = m[i - 1] + password + salt
+        md5.update(data)
+        m.append(md5.digest())
+        i += 1
+    ms = b''.join(m)
+    return ms[:key_len], ms[key_len:key_len + iv_len]
+
+
+def generate_signature(token, ts, nonce):
+    """
+    Generate MD5 signature for /ctrl endpoint
+    Signature = md5(md5(token[0:16]) + ts + nonce)
+    """
+    # First MD5: token.slice(0, 16)
+    first_md5 = hashlib.md5(token[:16].encode('utf-8')).hexdigest()
+    # Second MD5: first_md5 + ts + nonce
+    signature_data = first_md5 + str(ts) + nonce
+    signature = hashlib.md5(signature_data.encode('utf-8')).hexdigest()
+    return signature
+
+
+def generate_nonce(length=6):
+    """Generate a random alphanumeric nonce"""
+    chars = string.ascii_letters + string.digits
+    return ''.join(random.choice(chars) for _ in range(length))
+
+
+def fetch_from_http(ip, port, endpoint, token=None, did="random", verbose=False):
+    """
+    Fetch data from HTTP endpoint on the printer
+    
+    Args:
+        ip (str): IP address of the printer
+        port (int): Port number (default 18910)
+        endpoint (str): Either 'info' or 'ctrl'
+        token (str): Device token (required for /ctrl endpoint)
+        did (str): Device ID (required for /ctrl endpoint)
+        verbose (bool): Print debug information
+    
+    Returns:
+        dict: JSON response data
+    """
+    try:
+        if endpoint == 'info':
+            url = f"http://{ip}:{port}/info"
+            if verbose:
+                print(f"Fetching: {url}")
+            response = requests.get(url, timeout=10)
+            response.raise_for_status()
+            return response.json()
+        
+        elif endpoint == 'ctrl':
+            if not token:
+                raise ValueError("Token is required for /ctrl endpoint")
+            
+            # Generate signature parameters
+            ts = int(time.time() * 1000)  # Current timestamp in ms
+            nonce = generate_nonce(6)
+            signature = generate_signature(token, ts, nonce)
+            
+            url = f"http://{ip}:{port}/ctrl"
+            params = {
+                'ts': ts,
+                'nonce': nonce,
+                'sign': signature,
+                'did': did
+            }
+            
+            if verbose:
+                print(f"Fetching: {url}")
+                print(f"  Parameters:")
+                print(f"    ts: {ts}")
+                print(f"    nonce: {nonce}")
+                print(f"    sign: {signature}")
+                print(f"    did: {did}")
+            
+            response = requests.post(url, params=params, timeout=10)
+            response.raise_for_status()
+            return response.json()
+        
+        else:
+            raise ValueError(f"Unknown endpoint: {endpoint}")
+    
+    except requests.exceptions.RequestException as e:
+        raise Exception(f"HTTP request failed for {endpoint}: {e}")
+    except json.JSONDecodeError as e:
+        raise Exception(f"Invalid JSON response from {endpoint}: {e}")
+
+
+def decrypt_text(encrypted_data, key, iv):
+    """
+    Decrypt data using AES-256-CBC
+    Handles CryptoJS-style encrypted data (OpenSSL format with salt)
+    
+    Args:
+        encrypted_data (str): Encrypted data string (CryptoJS format)
+        key (str): Decryption key string
+        iv (str): Initialization vector string
+    
+    Returns:
+        dict: Decrypted JSON data
+    """
+    try:
+        # Convert key and IV to bytes
+        key_bytes = key.encode('utf-8')
+        iv_bytes = iv.encode('utf-8')
+        
+        # Decrypt using direct key and IV (as per the original code)
+        cipher = AES.new(key_bytes, AES.MODE_CBC, iv_bytes)
+        
+        # The encrypted_data might be base64 or hex encoded
+        # Try base64 first
+        try:
+            encrypted_bytes = base64.b64decode(encrypted_data)
+        except:
+            try:
+                # Try as hex
+                encrypted_bytes = bytes.fromhex(encrypted_data)
+            except:
+                # If all else fails, encode as UTF-8
+                encrypted_bytes = encrypted_data.encode('utf-8')
+        
+        # Decrypt
+        decrypted = cipher.decrypt(encrypted_bytes)
+        
+        # Try to unpad
+        try:
+            unpadded = unpad(decrypted, AES.block_size)
+        except ValueError:
+            # If unpadding fails, use as-is
+            unpadded = decrypted
+        
+        plaintext = unpadded.decode('utf-8')
+        
+        # Parse JSON
+        return json.loads(plaintext)
+    
+    except Exception as e:
+        return {"error": str(e), "error_type": type(e).__name__}
+
+
+def main():
+    """Main function to decrypt printer data"""
+    
+    # Parse command-line arguments
+    parser = argparse.ArgumentParser(
+        description='Fetch and decrypt Anycubic Kobra X credentials via HTTP API',
+    )
+    # HTTP mode
+    parser.add_argument('--ip', help='IP address of the printer')
+    parser.add_argument('--port', type=int, default=18910, help='Printer HTTP port (default: 18910)')
+
+    # File mode
+    parser.add_argument('--ctrl', default='ctrl.json', help='Path to ctrl.json (default: ctrl.json)')
+    parser.add_argument('--info', default='info.json', help='Path to info.json (default: info.json)')
+
+    # Output
+    parser.add_argument('--output', default=None, help='Save raw decrypted JSON to file (optional)')
+    parser.add_argument('--write-config', action='store_true',
+                        help='Write credentials to config.ini')
+    parser.add_argument('--config-file', default=None,
+                        help='Path to config.ini (default: ../config/config.ini relative to this script)')
+    parser.add_argument('--verbose', '-v', action='store_true', help='Verbose output')
+
+    args = parser.parse_args()
+    
+    # Determine mode: HTTP or file
+    if args.ip:
+        # HTTP mode: fetch from printer
+        if args.verbose:
+            print("=" * 70)
+            print("Fetching configuration from printer via HTTP")
+            print("=" * 70)
+            print(f"Printer IP: {args.ip}:{args.port}")
+            print()
+        
+        try:
+            # Fetch info.json
+            if args.verbose:
+                print("Step 1: Fetching device info...")
+            info = fetch_from_http(args.ip, args.port, 'info', verbose=args.verbose)
+            
+            # Get token from info
+            token = info.get('token')
+            if not token:
+                print("Error: No token found in /info response", file=sys.stderr)
+                return 1
+            
+            # Fetch data.json (encrypted config) from /ctrl endpoint
+            if args.verbose:
+                print("\nStep 2: Fetching encrypted configuration from /ctrl...")
+            data = fetch_from_http(args.ip, args.port, 'ctrl', token=token, verbose=args.verbose)
+            
+            if args.verbose:
+                print("\nData fetched successfully!")
+            
+        except Exception as e:
+            print(f"Error: {e}", file=sys.stderr)
+            return 1
+    
+    else:
+        # File mode: load from disk
+        if args.verbose:
+            print("=" * 70)
+            print("Loading configuration from files")
+            print("=" * 70)
+        
+        # Check if input files exist
+        if not Path(args.ctrl).exists():
+            print(f"Error: {args.ctrl} not found", file=sys.stderr)
+            return 1
+        if not Path(args.info).exists():
+            print(f"Error: {args.info} not found", file=sys.stderr)
+            return 1
+        
+        # Read ctrl.json
+        try:
+            with open(args.ctrl, 'r') as f:
+                data = json.load(f)
+        except json.JSONDecodeError as e:
+            print(f"Error reading {args.ctrl}: {e}", file=sys.stderr)
+            return 1
+        except Exception as e:
+            print(f"Error reading {args.ctrl}: {e}", file=sys.stderr)
+            return 1
+        
+        # Read info.json
+        try:
+            with open(args.info, 'r') as f:
+                info = json.load(f)
+        except json.JSONDecodeError as e:
+            print(f"Error reading {args.info}: {e}", file=sys.stderr)
+            return 1
+        except Exception as e:
+            print(f"Error reading {args.info}: {e}", file=sys.stderr)
+            return 1
+    
+    # Extract values
+    try:
+        encrypted_info = data['data']['info']
+        response_token = data['data']['token']
+        full_token = info['token']
+    except KeyError as e:
+        print(f"Error: Missing required key {e}", file=sys.stderr)
+        return 1
+    
+    # Generate decryption key and IV
+    key_part = full_token[16:32]
+    
+    if args.verbose:
+        print("=" * 70)
+        print("Printer Configuration Decryption")
+        print("=" * 70)
+        print(f"Input data file: {args.ctrl}")
+        print(f"Input info file: {args.info}")
+        print(f"Output file: {args.output}")
+        print()
+        print("Decryption Parameters:")
+        print(f"  Encrypted data length: {len(encrypted_info)} bytes")
+        print(f"  Full token: {full_token}")
+        print(f"  Full token length: {len(full_token)} characters")
+        print(f"  Response token (IV): {response_token}")
+        print(f"  Decryption key: {key_part}")
+        print(f"  Key length: {len(key_part)} characters")
+        print(f"  IV length: {len(response_token)} characters")
+        print()
+    
+    # Decrypt
+    if args.verbose:
+        print("Decrypting...")
+    
+    result = decrypt_text(encrypted_info, key_part, response_token)
+    
+    if 'error' in result:
+        print(f"Error during decryption: {result.get('error')}", file=sys.stderr)
+        return 1
+    
+    # Show result
+    print()
+    print("=" * 55)
+    print("  CREDENTIALS")
+    print("=" * 55)
+    print(f"  {'Printer IP':12s}  {result.get('ip', 'n/a')}")
+    print(f"  {'Username':12s}  {result.get('username', 'n/a')}")
+    print(f"  {'Password':12s}  {result.get('password', 'n/a')}")
+    print(f"  {'Device-ID':12s}  {result.get('deviceId', 'n/a')}")
+    print(f"  {'Mode-ID':12s}  {result.get('modeId', 'n/a')}")
+    print(f"  {'Model':12s}  {result.get('modelName', 'n/a')}")
+    print(f"  {'Broker':12s}  {result.get('broker', 'n/a')}")
+    print("=" * 55)
+
+    if args.verbose:
+        print()
+        print("Full decrypted config:")
+        # Strip certs/keys from verbose output to avoid cluttering terminal
+        display = {k: v for k, v in result.items() if k not in ('devicecrt', 'devicepk')}
+        print(json.dumps(display, indent=2))
+
+    # Optionally save raw JSON
+    if args.output:
+        try:
+            with open(args.output, 'w') as f:
+                json.dump(result, f, indent=2)
+            print(f"\nRaw config saved to: {args.output}")
+        except Exception as e:
+            print(f"Error writing to {args.output}: {e}", file=sys.stderr)
+            return 1
+
+    # Write config.ini
+    if args.write_config:
+        if args.config_file:
+            config_path = args.config_file
+        else:
+            config_path = os.path.join(os.path.dirname(os.path.abspath(__file__)),
+                                       '..', 'config', 'config.ini')
+            config_path = os.path.normpath(config_path)
+
+        _write_config_ini(result, config_path)
+    else:
+        print(f"\nTip: pass --write-config to write credentials directly to config.ini")
+
+    return 0
+
+
+def _write_config_ini(result: dict, config_path: str):
+    """Write fetched credentials into config.ini, preserving existing non-credential keys."""
+    import configparser
+
+    cfg = configparser.ConfigParser()
+
+    if os.path.isfile(config_path):
+        cfg.read(config_path)
+
+    if not cfg.has_section('connection'):
+        cfg.add_section('connection')
+
+    cfg.set('connection', 'printer_ip', result.get('ip', ''))
+    cfg.set('connection', 'mqtt_port',  '9883')
+    cfg.set('connection', 'username',   result.get('username', ''))
+    cfg.set('connection', 'password',   result.get('password', ''))
+    cfg.set('connection', 'device_id',  result.get('deviceId', ''))
+    cfg.set('connection', 'mode_id',    result.get('modeId', '20030'))
+
+    os.makedirs(os.path.dirname(config_path), exist_ok=True)
+    with open(config_path, 'w') as f:
+        cfg.write(f)
+
+    print(f"\n✓ Credentials written to '{config_path}'.")
+
+
+if __name__ == '__main__':
+    sys.exit(main())

kobrax_client.py

@@ -523,7 +523,7 @@ class KobraXClient:
 
         sock = socket.create_connection((self.host, 18910), timeout=30)
         sock.sendall(headers + body)
-        sock.settimeout(10)
+        sock.settimeout(120)  # große GCode-Dateien brauchen Zeit bis der Drucker antwortet
         response = b""
         try:
             while True:

kobrax_moonraker_bridge.py

@@ -108,11 +108,17 @@ KLIPPER_VERSION   = "v0.12.0-1"
 
 
 def _parse_gcode_estimated_time(data: bytes) -> int:
-    """Liest '; estimated printing time (normal mode) = Xh Ym Zs' aus GCode-Header.
+    """Liest geschätzte Druckzeit aus GCode (OrcaSlicer + PrusaSlicer).
-    Gibt Sekunden zurück, 0 wenn nicht gefunden. Sucht nur in den ersten 8KB."""
+    Gibt Sekunden zurück, 0 wenn nicht gefunden.
+    PrusaSlicer schreibt die Zeit ins Header (erste 16KB),
+    OrcaSlicer schreibt sie ans Ende der Datei (letzte 16KB)."""
     import re
-    header = data[:8192].decode("utf-8", errors="ignore")
+    # Anfang + Ende der Datei durchsuchen (OrcaSlicer schreibt Zeit am Ende)
-    m = re.search(r";\s*estimated printing time \(normal mode\)\s*=\s*(.*)", header)
+    search_text = (data[:16384] + data[-65536:]).decode("utf-8", errors="ignore")
+    # OrcaSlicer:  ; total estimated time: 9m 20s
+    # PrusaSlicer: ; estimated printing time (normal mode) = 1h 9m 20s
+    m = (re.search(r";\s*total estimated time:\s*(.*)", search_text) or
+         re.search(r";\s*estimated printing time \(normal mode\)\s*=\s*(.*)", search_text))
     if not m:
         return 0
     parts = re.findall(r"(\d+)\s*([hms])", m.group(1))
@@ -121,6 +127,8 @@ def _parse_gcode_estimated_time(data: bytes) -> int:
         if unit == "h":   secs += int(val) * 3600
         elif unit == "m": secs += int(val) * 60
         elif unit == "s": secs += int(val)
+    if secs:
+        log.info(f"Slicer-Schätzzeit: {secs}s ({m.group(1).strip()})")
     return secs
 
 
@@ -154,6 +162,7 @@ class KobraXBridge:
             "taskid":             "-1",
             "print_speed_mode":   2,
             "connection_error":   "",
+            "file_ready":         "",
         }
         self._ams_slots: list[dict] = []
         self._ams_loaded_slot: int = -1
@@ -169,6 +178,7 @@ class KobraXBridge:
         client.callbacks["info/report"]           = self._on_info
         client.callbacks["file/report"]           = self._on_file
         client.callbacks["multiColorBox/report"]  = self._on_multicolor_box
+        client.callbacks["light/report"]          = self._on_light
 
     # -------------------------------------------------------------------------
     # MQTT callbacks (called from reader thread)
@@ -191,6 +201,11 @@ class KobraXBridge:
         if kobra_state in ("stoped", "canceled"):
             self._state["progress"] = 0.0
             self._state["filename"] = ""
+            self._state["file_ready"] = ""
+            self._state["print_duration"] = 0
+            self._state["remain_time"] = 0
+            self._state["slicer_time"] = 0
+            self._thumbnail_b64 = ""
         self._state["filename"]       = d.get("filename", self._state["filename"])
         if "progress" in d:
             self._state["progress"]   = float(d["progress"]) / 100.0
@@ -275,6 +290,12 @@ class KobraXBridge:
             log.info(f"AMS-Slots empfangen: {len(slots)}, loaded_slot={self._ams_loaded_slot}")
             self._push_status_update()
 
+    def _on_light(self, payload: dict):
+        d = payload.get("data") or {}
+        self._state["light_on"]         = bool(d.get("status", 0))
+        self._state["light_brightness"] = int(d.get("brightness", 80))
+        self._push_status_update()
+
     # OrcaSlicer filament preset IDs (MoonrakerPrinterAgent.cpp mapping)
     _TRAY_INFO_IDX = {
         "PLA":      "OGFL99", "PLA-CF":   "OGFL98", "PLA SILK": "OGFL96",
@@ -503,6 +524,7 @@ class KobraXBridge:
         ct = request.headers.get("Content-Type", "")
         if "multipart" not in ct:
             return web.json_response({"error": "expected multipart"}, status=400)
+        auto_print = False
         reader = await request.multipart()
         file_data = None
         remote_filename = self._last_uploaded_file or "upload.gcode"
@@ -516,14 +538,17 @@ class KobraXBridge:
                 val = (await part.read()).decode("utf-8", errors="replace").strip()
                 if val:
                     remote_filename = val
+            elif part.name == "print":
+                val = (await part.read()).decode("utf-8", errors="replace").strip().lower()
+                auto_print = val == "true"
             else:
                 log.debug(f"Unbekanntes Multipart-Feld: {part.name}")
 
         if not file_data:
             return web.json_response({"error": "no file received"}, status=400)
 
-        file_md5  = hashlib.md5(file_data).hexdigest()
+        file_md5   = hashlib.md5(file_data).hexdigest()
-        file_size = len(file_data)
+        file_size  = len(file_data)
 
         # Slicer-Zeitschätzung aus GCode-Header auslesen
         self._state["slicer_time"] = _parse_gcode_estimated_time(file_data)
@@ -553,9 +578,24 @@ class KobraXBridge:
 
         # Druck starten mit vollständigem Payload (inkl. serve-URL + md5 + size)
         serve_url = f"http://{request.host}/serve/{remote_filename}"
-        log.info(f"Starte Druck automatisch: {remote_filename}")
+
-        loop = asyncio.get_event_loop()
+        # print=true im Multipart-Formular (Moonraker) oder Query-String → Druck starten
-        loop.run_in_executor(None, lambda: self._start_print(remote_filename, serve_url, file_md5, file_size))
+        # print=false oder fehlt → nur hochladen
+        if not auto_print:
+            auto_print = request.rel_url.query.get("print", "false").lower() == "true"
+
+        # Thumbnail immer anfordern (Drucker antwortet async mit file/report)
+        self._thumbnail_b64 = ""
+        self.client.publish("file", "fileDetails", {"root": "local", "filename": remote_filename}, timeout=0)
+
+        if auto_print:
+            log.info(f"Upload+Print (print=true): {remote_filename}")
+            self._state["file_ready"] = ""
+            loop = asyncio.get_event_loop()
+            loop.run_in_executor(None, lambda: self._start_print(remote_filename, serve_url, file_md5, file_size))
+        else:
+            log.info(f"Nur hochgeladen (print=false): {remote_filename}")
+            self._state["file_ready"] = remote_filename
 
         # OctoPrint-kompatibler Response (OrcaSlicer wertet refs aus)
         return web.json_response({
@@ -578,6 +618,7 @@ class KobraXBridge:
         }, status=201)
 
     def _start_print(self, filename: str, url: str = "", md5: str = "", filesize: int = 0):
+        self._state["file_ready"] = ""
         default_slot = getattr(self._args, "default_ams_slot", "auto")
         all_loaded = [(i, s) for i, s in enumerate(self._ams_slots) if s.get("status") == 5]
         if default_slot != "auto":
@@ -628,11 +669,6 @@ class KobraXBridge:
                 "model_objects_skip_parts": [],
             },
         }
-        # Thumbnail vorab anfordern (Drucker antwortet async auf file/report)
-        self._thumbnail_b64 = ""
-        self.client.publish("file", "fileDetails",
-                            {"root": "local", "filename": filename}, timeout=0)
-
         log.info(f"print/start → {filename}  url={url}  ams={len(self._ams_slots)} slots")
         result = self.client.publish("print", "start", payload, timeout=15.0)
         if result:
@@ -645,7 +681,9 @@ class KobraXBridge:
             body = await request.json()
         except Exception:
             body = {}
-        filename = body.get("filename") or self._last_uploaded_file
+        filename = (request.rel_url.query.get("filename")
+                    or body.get("filename")
+                    or self._last_uploaded_file)
         if not filename:
             return web.json_response({"error": "no filename"}, status=400)
 
@@ -718,6 +756,12 @@ class KobraXBridge:
         await loop.run_in_executor(None, lambda: self.client.stop_print(taskid))
         return web.json_response({"result": "ok"})
 
+    async def handle_api_file_ready_clear(self, request):
+        self._state["file_ready"] = ""
+        self._thumbnail_b64 = ""
+        self._push_status_update()
+        return web.json_response({"result": "ok"})
+
     async def handle_octoprint_version(self, request):
         return web.json_response({
             "api":     "0.1",
@@ -845,6 +889,11 @@ main{flex:1;overflow-y:auto;padding:20px}
 .spd-bar{height:4px;border-radius:2px;background:var(--border);margin-top:10px;overflow:hidden}
 .spd-bar-fill{height:100%;border-radius:2px;background:linear-gradient(90deg,var(--accent2),var(--accent));transition:width .3s}
 
+/* ── TIME CARDS ── */
+.time-grid{display:grid;grid-template-columns:1fr 1fr 1fr;gap:8px;margin-top:8px}
+.time-block{background:var(--raised);border-radius:10px;padding:10px 12px}
+.time-label{font-size:10px;text-transform:uppercase;letter-spacing:.08em;color:var(--txt2);margin-bottom:4px}
+.time-val{font-size:20px;font-weight:700;font-family:var(--mono);color:var(--txt)}
 /* ── TEMPS ── */
 .temp-pair{display:grid;grid-template-columns:1fr 1fr;gap:12px}
 .temp-card-inner{display:grid;grid-template-columns:1fr 1fr;gap:12px}
@@ -1010,6 +1059,13 @@ nav.bottom-nav{display:none;position:fixed;bottom:0;left:0;right:0;
 <body>
 
 <div id="conn-error-banner" style="display:none;background:#c0392b;color:#fff;padding:10px 18px;font-size:14px;text-align:center;position:sticky;top:0;z-index:999;"></div>
+<div id="file-ready-banner" style="display:none;background:#1a6e3c;color:#fff;padding:10px 18px;font-size:14px;text-align:center;position:sticky;top:0;z-index:998;display:none;align-items:center;justify-content:center;gap:12px">
+  <span>📄 <span id="file-ready-name"></span></span>
+  <button id="file-ready-btn" onclick="startReadyFile()"
+    style="padding:5px 16px;background:#fff;color:#1a6e3c;border:none;border-radius:6px;font-weight:700;cursor:pointer;font-size:13px"></button>
+  <button id="file-cancel-btn" onclick="cancelReadyFile()"
+    style="padding:5px 16px;background:rgba(255,255,255,0.15);color:#fff;border:1px solid rgba(255,255,255,0.5);border-radius:6px;font-weight:700;cursor:pointer;font-size:13px"></button>
+</div>
 
 <header>
   <div class="logo">⬡ KX-Bridge</div>
@@ -1171,14 +1227,26 @@ nav.bottom-nav{display:none;position:fixed;bottom:0;left:0;right:0;
           <div class="card-title"><span>◉</span> <span id="d-card-progress">Fortschritt</span></div>
           <img id="d-thumbnail" src="" alt="" style="display:none;width:100%;max-height:160px;object-fit:contain;border-radius:8px;background:#111;margin-bottom:10px">
           <div class="pct-big"><span id="d-pct">0</span><small>%</small></div>
-          <div class="progress-bar" style="margin:8px 0"><div class="progress-fill" id="d-pbar" style="width:0%"></div></div>
+          <div style="display:flex;align-items:center;gap:10px;margin:8px 0">
-          <div class="meta-row" style="margin-top:6px">
+            <div class="progress-bar" style="flex:1;margin:0"><div class="progress-fill" id="d-pbar" style="width:0%"></div></div>
-            <span id="d-elapsed">–</span>
+            <div class="time-block" style="padding:6px 10px;min-width:72px;text-align:center;flex-shrink:0">
-            <span id="d-remain" style="color:var(--acc)">–</span>
+              <div class="time-label" id="d-lbl-layers"></div>
-            <span id="d-layers" class="layer-badge">–</span>
+              <div class="time-val" style="font-size:16px" id="d-layers">–</div>
+            </div>
           </div>
-          <div class="meta-row" style="margin-top:4px;font-size:0.82em;opacity:0.7" id="d-slicer-row">
+          <div class="time-grid">
-            <span id="d-slicer-label"></span><span id="d-slicer-time" style="margin-left:4px">–</span>
+            <div class="time-block">
+              <div class="time-label" id="d-lbl-elapsed"></div>
+              <div class="time-val" id="d-elapsed">–</div>
+            </div>
+            <div class="time-block" id="d-slicer-row" style="display:none">
+              <div class="time-label" id="d-slicer-label"></div>
+              <div class="time-val" id="d-slicer-time">–</div>
+            </div>
+            <div class="time-block" style="color:var(--acc)">
+              <div class="time-label" id="d-lbl-remain"></div>
+              <div class="time-val" id="d-remain" style="color:var(--acc)">–</div>
+            </div>
           </div>
           <div class="fname" id="d-fname" title="" style="margin-top:6px">–</div>
           <div class="ctrl-btns" id="d-ctrl-btns" style="margin-top:12px">
@@ -1391,7 +1459,7 @@ var LANG_DE={
   header_status_standby:'Bereit',header_status_printing:'Druckt',header_status_complete:'Fertig',header_status_error:'Fehler',
   kobra_free:'Bereit',kobra_busy:'Beschäftigt',kobra_printing:'Druckt',kobra_preheating:'Aufheizen',kobra_auto_leveling:'Nivellierung',kobra_checking:'Prüfung',kobra_updated:'Aktualisierung',kobra_init:'Initialisierung',kobra_pausing:'Pausiert...',kobra_paused:'Pausiert',kobra_resuming:'Fortsetzen...',kobra_resumed:'Fortgesetzt',kobra_stopping:'Stoppt...',kobra_stoped:'Gestoppt',kobra_finished:'Abgeschlossen',kobra_failed:'Fehler',kobra_canceled:'Abgebrochen',kobra_offline:'Offline',
   nav_dashboard:'Dashboard',nav_print:'Druck',nav_temps:'Temperaturen',nav_motion:'Achsen',nav_ams:'AMS',nav_extras:'Licht / Lüfter',nav_console:'Konsole',
-  card_progress:'Fortschritt',card_temps:'Temperaturen',card_light_fan:'Lüfter',card_speed:'Druckgeschwindigkeit',card_cam:'Kamera',lbl_elapsed:'Verstrichen',lbl_remaining:'verbleibend',lbl_slicer_time:'Slicer-Schätzung:',
+  card_progress:'Fortschritt',card_temps:'Temperaturen',card_light_fan:'Lüfter',card_speed:'Druckgeschwindigkeit',card_cam:'Kamera',lbl_elapsed:'Verstrichen:',lbl_remaining:'Restzeit:',lbl_slicer_time:'Slicer-Schätzung:',lbl_layers:'Layer',
   speed_silent:'🐢 Leise',speed_normal:'⚡ Normal',speed_sport:'🚀 Sport',
   lbl_light:'💡 Licht',lbl_feed:'Einziehen',lbl_unload:'Ausziehen',
   cam_placeholder:'📷 Kamera nicht gestartet',btn_cam_start:'▶ Kamera',btn_cam_stop:'◼ Kamera',
@@ -1417,13 +1485,15 @@ var LANG_DE={
   slot_edit_title:'Slot bearbeiten',slot_edit_color:'Farbe',slot_edit_material:'Material',
   slot_edit_save:'💾 Speichern',slot_edit_custom:'z.B. PLA, PETG, ABS…',
   slot_edit_ok:'AMS Slot',
-  log_dir_all:'Alle'
+  log_dir_all:'Alle',
+  file_ready_btn:'▶ Druck starten',
+  file_cancel_btn:'✕ Abbrechen'
 };
 var LANG_EN={
   header_status_standby:'Ready',header_status_printing:'Printing',header_status_complete:'Complete',header_status_error:'Error',
   kobra_free:'Ready',kobra_busy:'Busy',kobra_printing:'Printing',kobra_preheating:'Preheating',kobra_auto_leveling:'Auto Leveling',kobra_checking:'Checking',kobra_updated:'Updating',kobra_init:'Initializing',kobra_pausing:'Pausing...',kobra_paused:'Paused',kobra_resuming:'Resuming...',kobra_resumed:'Resumed',kobra_stopping:'Stopping...',kobra_stoped:'Stopped',kobra_finished:'Finished',kobra_failed:'Error',kobra_canceled:'Cancelled',kobra_offline:'Offline',
   nav_dashboard:'Dashboard',nav_print:'Print',nav_temps:'Temperatures',nav_motion:'Motion',nav_ams:'AMS',nav_extras:'Light / Fan',nav_console:'Console',
-  card_progress:'Progress',card_temps:'Temperatures',card_light_fan:'Fan',card_speed:'Print Speed',card_cam:'Camera',lbl_elapsed:'Elapsed',lbl_remaining:'remaining',lbl_slicer_time:'Slicer estimate:',
+  card_progress:'Progress',card_temps:'Temperatures',card_light_fan:'Fan',card_speed:'Print Speed',card_cam:'Camera',lbl_elapsed:'Elapsed:',lbl_remaining:'Remaining:',lbl_slicer_time:'Slicer estimate:',lbl_layers:'Layer',
   speed_silent:'🐢 Silent',speed_normal:'⚡ Normal',speed_sport:'🚀 Sport',
   lbl_light:'💡 Light',lbl_feed:'Load',lbl_unload:'Unload',
   cam_placeholder:'📷 Camera not started',btn_cam_start:'▶ Camera',btn_cam_stop:'◼ Camera',
@@ -1449,7 +1519,9 @@ var LANG_EN={
   slot_edit_title:'Edit Slot',slot_edit_color:'Color',slot_edit_material:'Material',
   slot_edit_save:'💾 Save',slot_edit_custom:'e.g. PLA, PETG, ABS…',
   slot_edit_ok:'AMS Slot',
-  log_dir_all:'All'
+  log_dir_all:'All',
+  file_ready_btn:'▶ Start Print',
+  file_cancel_btn:'✕ Cancel'
 };
 var currentLang='de';
 var T=LANG_DE;
@@ -1475,6 +1547,10 @@ function applyLang(){
   setText('d-card-speed',T.card_speed);
   setText('d-card-cam',T.card_cam);
   setText('d-card-ams',T.panel_ams_title);
+  setText('d-lbl-elapsed',T.lbl_elapsed);
+  setText('d-lbl-remain',T.lbl_remaining);
+  setText('d-slicer-label',T.lbl_slicer_time);
+  setText('d-lbl-layers',T.lbl_layers);
   setText('d-lbl-light',T.lbl_light);
   setText('d-lbl-bed',T.label_bed);
   // Dashboard buttons
@@ -1532,6 +1608,8 @@ function applyLang(){
   setText('btn-slot-edit-save',T.slot_edit_save);
   var mi=document.getElementById('slot-edit-mat');if(mi)mi.setAttribute('placeholder',T.slot_edit_custom);
   setText('logdir-all',T.log_dir_all);
+  setText('file-ready-btn',T.file_ready_btn);
+  setText('file-cancel-btn',T.file_cancel_btn);
 }
 function setText(id,txt){var el=document.getElementById(id);if(el)el.textContent=txt;}
 (function(){
@@ -1621,8 +1699,10 @@ function renderLog(){
     if(fl&&!m.toLowerCase().includes(fl))return false;
     return true;
   });
+  var savedScroll=logAutoScroll?null:el.scrollTop;
   el.innerHTML=rows.map(l=>`<div><span class="ts">${l.ts}</span><span class="${l.cls}">${escHtml(l.msg)}</span></div>`).join('');
   if(logAutoScroll)el.scrollTop=el.scrollHeight;
+  else if(savedScroll!==null)el.scrollTop=savedScroll;
 }
 function onLogScroll(){
   var el=document.getElementById('console-log');
@@ -1665,6 +1745,13 @@ function applyState(){
   // connection error banner
   var banner=document.getElementById('conn-error-banner');
   if(banner){if(s.connection_error){banner.textContent='⚠ '+(T.lbl_conn_error||'Connection error:')+' '+s.connection_error;banner.style.display='block';}else{banner.style.display='none';}}
+  var frb=document.getElementById('file-ready-banner');
+  if(frb){
+    if(s.file_ready&&s.print_state==='standby'){
+      document.getElementById('file-ready-name').textContent=s.file_ready;
+      frb.style.display='flex';
+    }else{frb.style.display='none';}
+  }
   // header
   var b=document.getElementById('h-badge');
   b.className='hbadge '+s.print_state;
@@ -1691,16 +1778,12 @@ function applyState(){
   var layers=s.curr_layer&&s.total_layers?'L '+s.curr_layer+' / '+s.total_layers:'–';
   var dlayers=document.getElementById('d-layers');if(dlayers)dlayers.textContent=layers;
 
-  var elapsed=fmtTime(s.print_duration);
+  var delapsed=document.getElementById('d-elapsed');if(delapsed)delapsed.textContent=fmtTime(s.print_duration);
-  var delapsed=document.getElementById('d-elapsed');if(delapsed)delapsed.textContent=elapsed;
+  var dremain=document.getElementById('d-remain');if(dremain)dremain.textContent=s.remain_time>0?fmtTime(s.remain_time):'–';
-  var remain=s.remain_time>0?'≈ '+fmtTime(s.remain_time)+' '+T.lbl_remaining:'';
-  var dremain=document.getElementById('d-remain');if(dremain)dremain.textContent=remain;
-
   var dslrow=document.getElementById('d-slicer-row');
   var dsltime=document.getElementById('d-slicer-time');
-  var dsllbl=document.getElementById('d-slicer-label');
   if(dslrow&&dsltime){
-    if(s.slicer_time>0){dslrow.style.display='';if(dsllbl)dsllbl.textContent=T.lbl_slicer_time;dsltime.textContent=fmtTime(s.slicer_time);}
+    if(s.slicer_time>0){dslrow.style.display='';dsltime.textContent=fmtTime(s.slicer_time);}
     else{dslrow.style.display='none';}
   }
 
@@ -1877,6 +1960,24 @@ function openSlotEdit(i){
 function closeSlotEdit(){
   document.getElementById('slot-edit-modal').classList.remove('open');
 }
+function startReadyFile(){
+  var btn=document.getElementById('file-ready-btn');
+  if(btn){btn.disabled=true;btn.textContent='…';}
+  post('/printer/print/start',{filename:S.file_ready})
+    .then(function(r){return r.json();})
+    .then(function(r){
+      document.getElementById('file-ready-banner').style.display='none';
+      if(btn){btn.disabled=false;setText('file-ready-btn',T.file_ready_btn);}
+    })
+    .catch(function(e){
+      clog((T.log_error||'Error:')+' '+e,'msg-err');
+      if(btn){btn.disabled=false;setText('file-ready-btn',T.file_ready_btn);}
+    });
+}
+function cancelReadyFile(){
+  post('/api/file_ready/clear',{})
+    .then(function(){document.getElementById('file-ready-banner').style.display='none';});
+}
 function selectMatPreset(m){
   document.getElementById('slot-edit-mat').value=m;
   highlightMatBtn(m);
@@ -2502,6 +2603,7 @@ function toggleCam(){if(camOn)camStop();else camStart()}
             "ams_loaded_slot":  self._ams_loaded_slot,
             "thumbnail":        self._thumbnail_b64,
             "connection_error": s["connection_error"],
+            "file_ready":       s["file_ready"],
             "version":          self._read_version(),
         })
 
@@ -2982,7 +3084,7 @@ def _mqtt_error_msg(exc: Exception) -> str:
 
 
 def build_app(bridge: KobraXBridge) -> web.Application:
-    app = web.Application()
+    app = web.Application(client_max_size=256 * 1024 * 1024)  # 256 MB für große GCode-Dateien
     r = app.router
 
     # Moonraker API
@@ -3029,6 +3131,7 @@ def build_app(bridge: KobraXBridge) -> web.Application:
     r.add_post("/api/settings",            bridge.handle_api_settings_post)
     r.add_get("/api/update/check",         bridge.handle_api_update_check)
     r.add_post("/api/update/apply",        bridge.handle_api_update_apply)
+    r.add_post("/api/file_ready/clear",    bridge.handle_api_file_ready_clear)
     r.add_get("/api/log/stream",           bridge.handle_api_log_stream)
     r.add_get("/api/log/download",         bridge.handle_api_log_download)
     r.add_get("/serve/{filename}",         bridge.handle_serve_file)

requirements.txt

@@ -1,2 +1,4 @@
 aiohttp>=3.9
 imageio-ffmpeg>=0.4.9
+requests>=2.30.0
+pycryptodome>=3.20.0

start.sh

@@ -15,6 +15,15 @@ if [[ ! -f .env ]]; then
     fi
 fi
 
+# config/ Verzeichnis und config.ini.example anlegen falls nicht vorhanden
+mkdir -p config
+if [[ ! -f config/config.ini ]] && [[ ! -f config/config.ini.example ]]; then
+    if [[ -f config.ini.example ]]; then
+        cp config.ini.example config/config.ini.example
+        echo "[start] config/config.ini.example aus config.ini.example erstellt"
+    fi
+fi
+
 # Docker verfügbar?
 if ! docker info > /dev/null 2>&1; then
     echo "[start] Docker nicht gefunden – bitte Docker installieren."