viewit
6ab5c31035
All checks were successful
Testing Build / build (push) Successful in 8m44s
Adds an optional per-printer integration with KXGauge (https://gitea.it-drui.de/viewit/kxgauge), a small ESP32 round-face display that shows printer status as an emotion and hotend temperature as a color ring. KXGauge only exposes a GET-only HTTP API with no push/websocket, so the bridge actively pushes to it from the existing MQTT callbacks (_on_temp for the heat ring, _on_print + offline transitions for the emotion) whenever state actually changes, with a built-in dedupe so it doesn't spam the device every poll tick. - kxgauge_client.py: thin synchronous HTTP client (mirrors spoolman_client.py's shape - called from the MQTT reader thread). - New [kxgauge]/[kxgauge_mapping] config.ini sections; the mapping (kobra_state -> KXGauge emotion) is user-editable with a sane default and falls back per-key if only partially configured. - Settings UI: new card under Integrations with enable/URL/target-temp fields, a per-state emotion mapping list, and a connection-test button (/api/kxgauge/test). - Multi-printer aware: kxgauge_url/enabled/heat_peak merge per [printer_N] like the existing power-switch settings. Also fixes a real bug found while testing this: _find_config_path() resolves to the live project config/config.ini, not a sandboxed path, so any test hitting /api/settings POST without stubbing it out will silently overwrite the real printer config. test_settings.py already guards against this - test_kxgauge.py now does too.
358 lines
16 KiB
JSON
358 lines
16 KiB
JSON
{
|
||
"ace_dry_auto_refill": "Remplissage auto",
|
||
"ace_dry_chart": "Historique (Temp/Humidité)",
|
||
"ace_dry_current_temp": "Température",
|
||
"ace_dry_dialog_cancel": "Annuler",
|
||
"ace_dry_dialog_confirm": "Confirmer",
|
||
"ace_dry_dialog_custom_name": "Nom personnalisé",
|
||
"ace_dry_dialog_reset_default": "Réinitialiser",
|
||
"ace_dry_dialog_save_restart": "Enregistrer et redémarrer",
|
||
"ace_dry_dialog_temp": "Température (30-80°C)",
|
||
"ace_dry_dialog_time": "Temps restant (h:m:s)",
|
||
"ace_dry_dialog_title": "Réglages Temp/Durée du séchoir",
|
||
"ace_dry_dryer": "Séchoir",
|
||
"ace_dry_duration": "Durée (min)",
|
||
"ace_dry_enable": "Activer le séchage",
|
||
"ace_dry_humidity": "Humidité",
|
||
"ace_dry_preset_abs_asa": "ABS / ASA",
|
||
"ace_dry_preset_custom": "Personnalisé",
|
||
"ace_dry_preset_pa_pc": "PA / PC",
|
||
"ace_dry_preset_petg": "PETG",
|
||
"ace_dry_preset_pla": "PLA",
|
||
"ace_dry_preset_pla_plus": "PLA+",
|
||
"ace_dry_preset_tpu": "TPU",
|
||
"ace_dry_start": "▶ Démarrer",
|
||
"ace_dry_status_off": "Statut : Arrêté",
|
||
"ace_dry_status_on": "Statut : Actif",
|
||
"ace_dry_status_remaining": "Restant",
|
||
"ace_dry_stop": "■ Arrêter",
|
||
"ace_dry_temp": "Température (°C)",
|
||
"ace_dry_temp_line": "Température de séchage",
|
||
"ace_dry_time_line": "Durée de séchage",
|
||
"ace_dry_ui_pending": "(Interface seule, backend suivant)",
|
||
"add_printer": "Ajouter une imprimante",
|
||
"ams_empty": "Vide",
|
||
"ams_no_data": "Aucune donnée AMS reçue",
|
||
"apd_cancel": "Annuler",
|
||
"apd_confirm": "Ajouter",
|
||
"apd_err_ip": "Veuillez saisir une adresse IP",
|
||
"apd_fetching": "Récupération des données de l'imprimante…",
|
||
"apd_lbl_ip": "IP de l'imprimante",
|
||
"apd_lbl_name": "Nom (optionnel)",
|
||
"apd_placeholder_name": "ex. Kobra X Salon",
|
||
"apd_success": "Imprimante ajoutée, redémarrage du bridge…",
|
||
"apd_title": "Ajouter une imprimante",
|
||
"browser_tab_printer": "Sur l'imprimante",
|
||
"browser_tab_uploaded": "Téléversés",
|
||
"btn_cam_start": "▶ Caméra",
|
||
"btn_cam_start2": "▶ Démarrer",
|
||
"btn_cam_stop": "◼ Caméra",
|
||
"btn_cam_stop2": "◼ Arrêter",
|
||
"btn_cancel": "✕ Arrêter",
|
||
"btn_cancel_generic": "Annuler",
|
||
"btn_confirm_generic": "Confirmer",
|
||
"btn_connect": "⚡ Connecter",
|
||
"btn_delete": "Supprimer",
|
||
"btn_disable_motors": "Moteurs Off",
|
||
"btn_disconnect": "✕ Déconnecter",
|
||
"btn_home_all": "Origine Tout",
|
||
"btn_home_xy": "Origine XY",
|
||
"btn_home_z": "Origine Z",
|
||
"btn_pause": "⏸ Pause",
|
||
"btn_resume": "▶ Reprendre",
|
||
"cam_placeholder": "📷 Caméra non démarrée",
|
||
"cam_stream_unavailable": "Flux indisponible",
|
||
"card_ace_dry": "Séchage ACE",
|
||
"card_ams": "Filament",
|
||
"card_cam": "Caméra",
|
||
"card_light_fan": "Ventilateur",
|
||
"card_progress": "Progression",
|
||
"card_speed": "Vitesse d'impression",
|
||
"card_temps": "Températures",
|
||
"confirm_cancel": "Vraiment annuler l'impression ?",
|
||
"fd_cancel": "Annuler",
|
||
"fd_no_matching_material": "Aucun matériau correspondant",
|
||
"fd_no_slots_msg": "Aucun slot AMS chargé.{br}Lancer l'impression quand même ?",
|
||
"fd_objects_hint": "Ignorer des objets (optionnel) :",
|
||
"fd_objects_toggle": "Ignorer des objets",
|
||
"fd_options_title": "Options",
|
||
"fd_print": "▶ Imprimer",
|
||
"fd_slot": "Slot",
|
||
"fd_slots_hint": "Associer le canal GCode au slot AMS :",
|
||
"fd_title": "Attribution de fente",
|
||
"fd_used": "UTILISÉ",
|
||
"file_cancel_btn": "✕ Annuler",
|
||
"file_ready_btn": "▶ Lancer l'impression",
|
||
"file_slots_btn": "🎨 Choisir les slots",
|
||
"header_status_complete": "Terminé",
|
||
"header_status_error": "Erreur",
|
||
"header_status_printing": "Impression",
|
||
"header_status_standby": "Prêt",
|
||
"hint_ip_no_port": "Adresse IP uniquement, sans port (ex. 192.168.1.102)",
|
||
"kobra_auto_leveling": "Mise à niveau auto",
|
||
"kobra_busy": "Occupé",
|
||
"kobra_canceled": "Annulé",
|
||
"kobra_checking": "Vérification",
|
||
"kobra_failed": "Erreur",
|
||
"kobra_finished": "Terminé",
|
||
"kobra_free": "Disponible",
|
||
"kobra_init": "Initialisation",
|
||
"kobra_offline": "Hors ligne",
|
||
"kobra_paused": "En pause",
|
||
"kobra_pausing": "Pause en cours…",
|
||
"kobra_preheating": "Préchauffage",
|
||
"kobra_printing": "Impression",
|
||
"kobra_resumed": "Repris",
|
||
"kobra_resuming": "Reprise en cours…",
|
||
"kobra_stoped": "Arrêté",
|
||
"kobra_stopping": "Arrêt en cours…",
|
||
"kobra_updated": "Mise à jour",
|
||
"label_bed": "Plateau",
|
||
"label_fan": "🌀 Ventilateur",
|
||
"label_light": "💡 Lumière",
|
||
"label_nozzle": "Buse",
|
||
"label_off": "Éteint",
|
||
"label_on_off": "On / Off",
|
||
"label_set": "Définir",
|
||
"label_slot": "Slot",
|
||
"label_speed": "Vitesse",
|
||
"label_step": "Pas :",
|
||
"label_target_c": "Cible :",
|
||
"lbl_conn_error": "Erreur de connexion :",
|
||
"lbl_elapsed": "Écoulé :",
|
||
"lbl_feed": "Charger",
|
||
"lbl_layers": "Couche",
|
||
"lbl_light": "💡 Lumière",
|
||
"lbl_pause_reason": "Impression en pause :",
|
||
"lbl_remaining": "Restant :",
|
||
"lbl_slicer_time": "Estimation slicer :",
|
||
"lbl_spoolman_sync_rate": "Taux de sync. (s, 0=fin impression)",
|
||
"lbl_spoolman_url": "URL du serveur",
|
||
"lbl_unload": "Décharger",
|
||
"lbl_zpos": "Z (mm)",
|
||
"log_auto": "⬇ Auto",
|
||
"log_axis": "Axe",
|
||
"log_bed": "Plateau →",
|
||
"log_cam_start": "Caméra démarrée :",
|
||
"log_cam_stop": "Caméra arrêtée",
|
||
"log_clear": "✕ Effacer",
|
||
"log_delete_failed": "Échec de la suppression",
|
||
"log_dir_all": "Tout",
|
||
"log_dir_label": "Sens :",
|
||
"log_dir_rx": "RX",
|
||
"log_dir_tx": "TX",
|
||
"log_download": "⬇ Télécharger",
|
||
"log_error": "Erreur :",
|
||
"log_fan": "Ventilateur →",
|
||
"log_filter_placeholder": "Filtrer…",
|
||
"log_home": "Origine",
|
||
"log_home_all": "Origine Tout",
|
||
"log_light_off": "Lumière éteinte",
|
||
"log_light_on": "Lumière allumée",
|
||
"log_lvl_err": "⛔ Erreurs",
|
||
"log_lvl_label": "Niveau :",
|
||
"log_lvl_warn": "⚠ Avert.",
|
||
"log_nozzle": "Buse →",
|
||
"log_poll_error": "Erreur de sondage :",
|
||
"log_print_action": "Impression :",
|
||
"log_print_start": "Début de l'impression :",
|
||
"log_topic_ams": "AMS",
|
||
"log_topic_info": "Info",
|
||
"log_topic_label": "Sujet :",
|
||
"log_topic_print": "Impression",
|
||
"log_topic_status": "Statut",
|
||
"modal_sec_kxgauge": "KXGauge",
|
||
"modal_sec_obico": "Obico",
|
||
"modal_sec_spoolman": "Spoolman",
|
||
"nav_ams": "AMS",
|
||
"nav_browser": "Navigateur",
|
||
"nav_console": "Console",
|
||
"nav_dashboard": "Tableau de bord",
|
||
"nav_extras": "Lumière / Ventilateur",
|
||
"nav_motion": "Mouvement",
|
||
"nav_print": "Impression",
|
||
"nav_printers": "Imprimantes",
|
||
"nav_settings": "Paramètres",
|
||
"nav_temps": "Températures",
|
||
"orca_profile_done": "Importé",
|
||
"orca_profile_dropmsg": "Déposez ici ou cliquez",
|
||
"orca_profile_help_html": "Déposez un <b>ZIP</b> de votre dossier filament OrcaSlicer ou des fichiers <b>.json</b> individuels.<br>Dans OrcaSlicer : <i>Aide → Afficher le dossier de configuration → user/<id>/filament/</i>",
|
||
"orca_profile_hint": "Importez vos propres profils de filament OrcaSlicer (ouvrez le dossier utilisateur via Aide → Afficher le dossier de configuration)",
|
||
"orca_profile_import_btn": "Importer des profils",
|
||
"orca_profile_import_link": "★ Importer mes profils…",
|
||
"orca_profile_import_title": "Importer vos profils OrcaSlicer",
|
||
"orca_profile_list_label": "Profils importés",
|
||
"orca_profile_section": "Profils OrcaSlicer",
|
||
"orca_profile_skipped": "ignoré",
|
||
"orca_profile_uploading": "Envoi en cours…",
|
||
"orca_profile_user_empty": "– aucun –",
|
||
"orca_profile_user_label": "Mes profils",
|
||
"panel_ams_title": "Filament",
|
||
"panel_browser_title": "Explorateur de fichiers",
|
||
"panel_console_title": "Journal d'événements",
|
||
"panel_extras_camera": "Caméra",
|
||
"panel_extras_fan": "Ventilateur",
|
||
"panel_extras_light": "Lumière",
|
||
"panel_motion_xy": "Contrôle des Axes",
|
||
"panel_print_btn_cancel": "✕ Annuler",
|
||
"panel_print_btn_pause": "⏸ Pause",
|
||
"panel_print_btn_resume": "▶ Reprendre",
|
||
"panel_print_temps_live": "Températures (en direct)",
|
||
"panel_print_title": "Contrôle impression",
|
||
"panel_temps_bed": "Plateau chauffant",
|
||
"panel_temps_chart": "Historique (60 dernières valeurs)",
|
||
"panel_temps_nozzle": "Buse",
|
||
"print_auto_leveling": "Mise à niveau auto pour cette impression",
|
||
"printer_store_delete_confirm": "Supprimer le fichier de l'imprimante ?",
|
||
"printer_store_delete_selected_confirm": "Supprimer {n} fichiers sélectionnés de l'imprimante ?",
|
||
"printer_store_empty": "Aucun fichier sur l'imprimante.",
|
||
"printer_store_unreachable": "Imprimante injoignable ou requête échouée.",
|
||
"printers_active": "● actif",
|
||
"printers_current": "Imprimante actuelle",
|
||
"printers_empty_hint": "Aucune imprimante configurée.",
|
||
"printers_loading": "Chargement…",
|
||
"printers_none": "Aucune imprimante configurée.",
|
||
"printers_remove": "Supprimer l'imprimante",
|
||
"printers_power": "Basculer l'alimentation de l'imprimante",
|
||
"printers_power_on": "Alimentation : Allumée",
|
||
"printers_power_off": "Alimentation : Éteinte",
|
||
"printers_power_off_confirm": "Éteindre l'alimentation de l'imprimante ? Assurez-vous qu'aucune impression n'est en cours.",
|
||
"printers_remove_confirm": "Supprimer l'imprimante \"{name}\" ? Le bridge va redémarrer.",
|
||
"printers_switch": "Changer →",
|
||
"progress_action_clear": "Vider",
|
||
"progress_action_print": "Imprimer",
|
||
"progress_action_slots": "Affecter les emplacements",
|
||
"settings_auto_leveling": "Mise à niveau auto avant impression",
|
||
"settings_auto_leveling_label": "Mise à niveau auto avant impression",
|
||
"settings_btn_tooltip": "Paramètres",
|
||
"settings_camera_on_print": "Activer la caméra au démarrage de l'impression",
|
||
"settings_cat_connection": "Connexion",
|
||
"settings_cat_display": "Apparence",
|
||
"settings_cat_filament": "Filament",
|
||
"settings_cat_language": "Langue",
|
||
"settings_cat_printer": "Imprimante",
|
||
"settings_cat_system": "Système",
|
||
"settings_cat_theme": "Basculer clair / sombre",
|
||
"settings_connection": "Connexion",
|
||
"settings_default_slot": "Slot par défaut (couleur unique)",
|
||
"settings_device_id": "ID de l'appareil",
|
||
"settings_device_id_hint": "32 caractères hexadécimaux",
|
||
"settings_device_id_placeholder": "32 caractères hexadécimaux",
|
||
"settings_filament_mapping": "Mappage du profil de filament (par emplacement)",
|
||
"settings_filament_mapping_hint": "Profil Orca fixe par emplacement AMS. Lors de la synchronisation du slicer, le bridge envoie ce profil au lieu de « Generic ».",
|
||
"settings_filament_mapping_label": "Mappage du profil de filament (par emplacement)",
|
||
"settings_filament_mapping_save": "Enregistrer le mappage",
|
||
"settings_filament_mapping_save_label": "Enregistrer le mappage",
|
||
"settings_file_ready_banner": "Barre d'impression",
|
||
"settings_file_ready_dialog": "Dialogue d'impression",
|
||
"settings_file_ready_mode": "Après téléchargement : Comportement de démarrage d'impression",
|
||
"settings_integrations": "Intégrations",
|
||
"settings_kxgauge_enabled": "Activé",
|
||
"settings_kxgauge_heat_peak": "Température cible (°C)",
|
||
"settings_kxgauge_test": "Tester la connexion",
|
||
"settings_kxgauge_url": "URL de l'appareil",
|
||
"settings_language": "Langue",
|
||
"settings_mode_id": "ID du mode",
|
||
"settings_mode_id_placeholder": "20030",
|
||
"settings_power": "Prise électrique",
|
||
"settings_power_on_url": "URL d'allumage",
|
||
"settings_power_off_url": "URL d'extinction",
|
||
"settings_power_status_url": "URL de statut",
|
||
"settings_power_hint": "Optionnel : URL HTTP GET pour une prise connectée (ex. Tasmota) contrôlant l'alimentation secteur de l'imprimante. Laisser vide masque le bouton d'alimentation.",
|
||
"settings_mqtt_port": "Port MQTT",
|
||
"settings_mqtt_username_placeholder": "userXXXXXXXX",
|
||
"settings_orca_profiles_import": "Importer des profils",
|
||
"settings_orca_profiles_label": "Profils OrcaSlicer",
|
||
"settings_password": "Mot de passe MQTT",
|
||
"settings_poll": "Intervalle de sondage (secondes)",
|
||
"settings_poll_interval_hint": "Fréquence à laquelle le bridge interroge l'état de l'imprimante",
|
||
"settings_poll_interval_label": "Intervalle de sondage (secondes)",
|
||
"settings_print": "Paramètres d'impression",
|
||
"settings_printer_ip": "IP de l'imprimante",
|
||
"settings_printer_name": "Nom de l'imprimante",
|
||
"settings_printer_name_placeholder": "p. ex. Kobra X Salon",
|
||
"settings_save": "Enregistrer et redémarrer",
|
||
"settings_slot_auto": "Auto (tous les slots chargés)",
|
||
"settings_theme_toggle": "Basculer clair / sombre",
|
||
"settings_title": "Paramètres",
|
||
"settings_username": "Nom d'utilisateur MQTT",
|
||
"settings_vendor_filter_placeholder": "Rechercher des fabricants…",
|
||
"settings_version": "Version",
|
||
"settings_visible_vendors": "Fabricants visibles (liste des profils)",
|
||
"settings_visible_vendors_hint": "Seuls ces fabricants apparaissent dans la liste des profils d'emplacement. Rien de sélectionné = tout afficher. « Generic » et vos propres profils sont toujours visibles.",
|
||
"settings_visible_vendors_label": "Fabricants visibles (liste des profils)",
|
||
"settings_visible_vendors_save": "Enregistrer la sélection",
|
||
"settings_visible_vendors_save_label": "Enregistrer la sélection",
|
||
"settings_web_upload_warning": "Afficher un avertissement lors de l'impression de fichiers web",
|
||
"settings_delete_printer_file_after_print": "Supprimer le fichier de l'imprimante après une impression réussie",
|
||
"settings_delete_printer_file_after_print_hint": "S'applique uniquement aux impressions lancées via ce bridge (fichiers qu'il a lui-même téléversés) - les impressions lancées directement depuis l'imprimante ou Anycubic Slicer ne sont jamais supprimées, car aucune copie n'existe ailleurs.",
|
||
"sf_all": "Tout",
|
||
"sf_err": "✗ Échoués",
|
||
"sf_new": "Nouveau",
|
||
"sf_ok": "✓ Terminés",
|
||
"skip_already": "ignoré",
|
||
"skip_btn_label": "Objets",
|
||
"skip_cancel": "Annuler",
|
||
"skip_confirm": "Ignorer",
|
||
"skip_confirm_btn": "Ignorer",
|
||
"skip_hint": "Décochez les objets que vous ne souhaitez plus imprimer :",
|
||
"skip_no_objects": "Aucun objet dans cette impression.",
|
||
"skip_select_at_least_one": "Veuillez sélectionner au moins un objet.",
|
||
"skip_sending": "Envoi …",
|
||
"skip_success": "Les objets seront ignorés.",
|
||
"skip_title": "✂ Ignorer des objets",
|
||
"slot_copy_from": "Copier la couleur du slot…",
|
||
"slot_edit_color": "Couleur",
|
||
"slot_edit_custom": "ex. PLA, PETG, ABS…",
|
||
"slot_edit_load": "⬇ Charger",
|
||
"slot_edit_material": "Matériau",
|
||
"slot_edit_ok": "Slot AMS",
|
||
"slot_edit_profile": "Profil OrcaSlicer",
|
||
"slot_edit_profile_default": "— Générique (défaut) —",
|
||
"slot_edit_profile_hint": "Envoyé lors de la synchronisation OrcaSlicer comme marque spécifique au lieu de \"Générique\"",
|
||
"slot_edit_save": "💾 Enregistrer",
|
||
"slot_edit_title": "Modifier le slot",
|
||
"slot_edit_unload": "⬆ Décharger",
|
||
"speed_normal": "⚡ Normal",
|
||
"speed_silent": "🐢 Silencieux",
|
||
"speed_sport": "🚀 Sport",
|
||
"ss_date": "↓ Date",
|
||
"ss_dur": "⏱ Durée d'impression",
|
||
"ss_name": "A–Z Nom",
|
||
"store_delete_confirm": "Supprimer le fichier ?",
|
||
"store_delete_selected": "Supprimer la sélection",
|
||
"store_delete_selected_confirm": "Supprimer {n} fichiers sélectionnés ?",
|
||
"store_download": "⬇ Télécharger",
|
||
"store_empty": "Aucun fichier uploadé.",
|
||
"store_estimate": "Estimation",
|
||
"store_exit_select": "Annuler",
|
||
"store_never": "jamais imprimé",
|
||
"store_no_results": "Aucun fichier trouvé.",
|
||
"store_print": "▶ Imprimer",
|
||
"store_print_confirm": "Imprimer le fichier ?",
|
||
"store_refresh": "↻ Actualiser",
|
||
"store_search_placeholder": "🔍 Rechercher…",
|
||
"store_select_all": "Tout sélectionner",
|
||
"store_selected_count": "{n} sélectionné(s)",
|
||
"store_upload_busy": "⏳ Envoi en cours…",
|
||
"store_upload_error": "✗ {error}",
|
||
"store_upload_label_browse": "parcourir",
|
||
"store_upload_label_prefix": "Déposez un GCode ici ou ",
|
||
"store_upload_only_gcode": "✗ Seuls les fichiers GCode sont autorisés (.gcode, .3mf, .bgcode)",
|
||
"store_upload_success": "✓ {file}",
|
||
"store_web_verify_abort": "Annuler",
|
||
"store_web_verify_confirm": "Confirmer",
|
||
"store_web_verify_msg": "Veuillez vérifier que ce fichier a été créé pour Anycubic Kobra X.",
|
||
"store_web_verify_title": "Vérifier le fichier",
|
||
"update_apply": "Installer maintenant",
|
||
"update_applying": "Téléchargement…",
|
||
"update_available": "disponible",
|
||
"update_check": "Vérifier les mises à jour",
|
||
"update_checking": "Vérification…",
|
||
"update_docker": "Copier la commande",
|
||
"update_docker_copied": "Copié ! Exécuter : docker compose pull && docker compose up -d",
|
||
"update_error": "Erreur",
|
||
"update_none": "Déjà à jour",
|
||
"update_restarting": "Redémarrage…"
|
||
}
|