diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json index bfccb5f1420..bffb84e7362 100644 --- a/resources/profiles/BBL.json +++ b/resources/profiles/BBL.json @@ -13,6 +13,10 @@ "name": "Bambu Lab A1 mini", "sub_path": "machine/Bambu Lab A1 mini.json" }, + { + "name": "Bambu Lab H2", + "sub_path": "machine/Bambu Lab H2.json" + }, { "name": "Bambu Lab H2D", "sub_path": "machine/Bambu Lab H2D.json" @@ -391,6 +395,10 @@ "name": "0.08mm Extra Fine @BBL A1M", "sub_path": "process/0.08mm Extra Fine @BBL A1M.json" }, + { + "name": "0.08mm Extra Fine @BBL H2", + "sub_path": "process/0.08mm Extra Fine @BBL H2.json" + }, { "name": "0.08mm Extra Fine @BBL P1P", "sub_path": "process/0.08mm Extra Fine @BBL P1P.json" @@ -415,6 +423,10 @@ "name": "0.08mm High Quality @BBL X1C", "sub_path": "process/0.08mm High Quality @BBL X1C.json" }, + { + "name": "0.08mm Extra Fine @BBL H2 0.2 nozzle", + "sub_path": "process/0.08mm Extra Fine @BBL H2 0.2 nozzle.json" + }, { "name": "0.08mm High Quality @BBL A1 0.2 nozzle", "sub_path": "process/0.08mm High Quality @BBL A1 0.2 nozzle.json" @@ -467,6 +479,10 @@ "name": "0.10mm Standard @BBL A1 0.2 nozzle", "sub_path": "process/0.10mm Standard @BBL A1 0.2 nozzle.json" }, + { + "name": "0.10mm Standard @BBL H2 0.2 nozzle", + "sub_path": "process/0.10mm Standard @BBL H2 0.2 nozzle.json" + }, { "name": "0.10mm Standard @BBL P1P 0.2 nozzle", "sub_path": "process/0.10mm Standard @BBL P1P 0.2 nozzle.json" @@ -483,6 +499,10 @@ "name": "0.12mm Fine @BBL A1M", "sub_path": "process/0.12mm Fine @BBL A1M.json" }, + { + "name": "0.12mm Fine @BBL H2", + "sub_path": "process/0.12mm Fine @BBL H2.json" + }, { "name": "0.12mm Fine @BBL P1P", "sub_path": "process/0.12mm Fine @BBL P1P.json" @@ -507,6 +527,10 @@ "name": "0.12mm High Quality @BBL X1C", "sub_path": "process/0.12mm High Quality @BBL X1C.json" }, + { + "name": "0.12mm Balanced Quality @BBL H2 0.2 nozzle", + "sub_path": "process/0.12mm Balanced Quality @BBL H2 0.2 nozzle.json" + }, { "name": "0.12mm Draft @BBL A1 0.2 nozzle", "sub_path": "process/0.12mm Draft @BBL A1 0.2 nozzle.json" @@ -539,6 +563,10 @@ "name": "0.14mm Standard @BBL X1C 0.2 nozzle", "sub_path": "process/0.14mm Standard @BBL X1C 0.2 nozzle.json" }, + { + "name": "0.16mm Balanced Quality @BBL H2", + "sub_path": "process/0.16mm Balanced Quality @BBL H2.json" + }, { "name": "0.16mm High Quality @BBL A1", "sub_path": "process/0.16mm High Quality @BBL A1.json" @@ -571,6 +599,14 @@ "name": "0.16mm Optimal @BBL X1C", "sub_path": "process/0.16mm Optimal @BBL X1C.json" }, + { + "name": "0.16mm Standard @BBL H2", + "sub_path": "process/0.16mm Standard @BBL H2.json" + }, + { + "name": "0.18mm Balanced Quality @BBL H2 0.6 nozzle", + "sub_path": "process/0.18mm Balanced Quality @BBL H2 0.6 nozzle.json" + }, { "name": "0.18mm Fine @BBL A1 0.6 nozzle", "sub_path": "process/0.18mm Fine @BBL A1 0.6 nozzle.json" @@ -587,10 +623,18 @@ "name": "0.18mm Standard @BBL X1C 0.6 nozzle", "sub_path": "process/0.18mm Standard @BBL X1C 0.6 nozzle.json" }, + { + "name": "0.20mm Balanced Strength @BBL H2", + "sub_path": "process/0.20mm Balanced Strength @BBL H2.json" + }, { "name": "0.20mm Standard @BBL A1", "sub_path": "process/0.20mm Standard @BBL A1.json" }, + { + "name": "0.20mm Standard @BBL H2", + "sub_path": "process/0.20mm Standard @BBL H2.json" + }, { "name": "0.20mm Standard @BBL P1P", "sub_path": "process/0.20mm Standard @BBL P1P.json" @@ -627,6 +671,14 @@ "name": "0.24mm Draft @BBL X1C", "sub_path": "process/0.24mm Draft @BBL X1C.json" }, + { + "name": "0.24mm Standard @BBL H2", + "sub_path": "process/0.24mm Standard @BBL H2.json" + }, + { + "name": "0.24mm Balanced Strength @BBL H2 0.6 nozzle", + "sub_path": "process/0.24mm Balanced Strength @BBL H2 0.6 nozzle.json" + }, { "name": "0.24mm Optimal @BBL A1 0.6 nozzle", "sub_path": "process/0.24mm Optimal @BBL A1 0.6 nozzle.json" @@ -643,6 +695,10 @@ "name": "0.24mm Standard @BBL X1C 0.6 nozzle", "sub_path": "process/0.24mm Standard @BBL X1C 0.6 nozzle.json" }, + { + "name": "0.24mm Balanced Quality @BBL H2 0.8 nozzle", + "sub_path": "process/0.24mm Balanced Quality @BBL H2 0.8 nozzle.json" + }, { "name": "0.24mm Fine @BBL A1 0.8 nozzle", "sub_path": "process/0.24mm Fine @BBL A1 0.8 nozzle.json" @@ -679,6 +735,10 @@ "name": "0.30mm Standard @BBL A1 0.6 nozzle", "sub_path": "process/0.30mm Standard @BBL A1 0.6 nozzle.json" }, + { + "name": "0.30mm Standard @BBL H2 0.6 nozzle", + "sub_path": "process/0.30mm Standard @BBL H2 0.6 nozzle.json" + }, { "name": "0.30mm Standard @BBL P1P 0.6 nozzle", "sub_path": "process/0.30mm Standard @BBL P1P 0.6 nozzle.json" @@ -707,6 +767,10 @@ "name": "0.30mm Strength @BBL X1C 0.6 nozzle", "sub_path": "process/0.30mm Strength @BBL X1C 0.6 nozzle.json" }, + { + "name": "0.32mm Balanced Strength @BBL H2 0.8 nozzle", + "sub_path": "process/0.32mm Balanced Strength @BBL H2 0.8 nozzle.json" + }, { "name": "0.32mm Optimal @BBL A1 0.8 nozzle", "sub_path": "process/0.32mm Optimal @BBL A1 0.8 nozzle.json" @@ -743,6 +807,10 @@ "name": "0.40mm Standard @BBL A1 0.8 nozzle", "sub_path": "process/0.40mm Standard @BBL A1 0.8 nozzle.json" }, + { + "name": "0.40mm Standard @BBL H2 0.8 nozzle", + "sub_path": "process/0.40mm Standard @BBL H2 0.8 nozzle.json" + }, { "name": "0.40mm Standard @BBL P1P 0.8 nozzle", "sub_path": "process/0.40mm Standard @BBL P1P 0.8 nozzle.json" @@ -1405,6 +1473,18 @@ "name": "Bambu ABS @BBL A1 0.2 nozzle", "sub_path": "filament/Bambu ABS @BBL A1 0.2 nozzle.json" }, + { + "name": "Bambu ABS @BBL H2", + "sub_path": "filament/Bambu ABS @BBL H2.json" + }, + { + "name": "Bambu ABS @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu ABS @BBL H2 0.2 nozzle.json" + }, + { + "name": "Bambu ABS @BBL H2 0.8 nozzle", + "sub_path": "filament/Bambu ABS @BBL H2 0.8 nozzle.json" + }, { "name": "Bambu ABS @BBL H2D", "sub_path": "filament/Bambu ABS @BBL H2D.json" @@ -1449,6 +1529,10 @@ "name": "Bambu ABS-GF @BBL A1", "sub_path": "filament/Bambu ABS-GF @BBL A1.json" }, + { + "name": "Bambu ABS-GF @BBL H2", + "sub_path": "filament/Bambu ABS-GF @BBL H2.json" + }, { "name": "Bambu ABS-GF @BBL H2D", "sub_path": "filament/Bambu ABS-GF @BBL H2D.json" @@ -1469,6 +1553,10 @@ "name": "Bambu Support for ABS @BBL A1", "sub_path": "filament/Bambu Support for ABS @BBL A1.json" }, + { + "name": "Bambu Support for ABS @BBL H2", + "sub_path": "filament/Bambu Support for ABS @BBL H2.json" + }, { "name": "Bambu Support for ABS @BBL H2D", "sub_path": "filament/Bambu Support for ABS @BBL H2D.json" @@ -1549,6 +1637,18 @@ "name": "Bambu ASA @BBL A1 0.6 nozzle", "sub_path": "filament/Bambu ASA @BBL A1 0.6 nozzle.json" }, + { + "name": "Bambu ASA @BBL H2", + "sub_path": "filament/Bambu ASA @BBL H2.json" + }, + { + "name": "Bambu ASA @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu ASA @BBL H2 0.2 nozzle.json" + }, + { + "name": "Bambu ASA @BBL H2 0.6 nozzle", + "sub_path": "filament/Bambu ASA @BBL H2 0.6 nozzle.json" + }, { "name": "Bambu ASA @BBL H2D 0.2 nozzle", "sub_path": "filament/Bambu ASA @BBL H2D 0.2 nozzle.json" @@ -1593,6 +1693,10 @@ "name": "Bambu ASA-Aero @BBL A1", "sub_path": "filament/Bambu ASA-Aero @BBL A1.json" }, + { + "name": "Bambu ASA-Aero @BBL H2", + "sub_path": "filament/Bambu ASA-Aero @BBL H2.json" + }, { "name": "Bambu ASA-Aero @BBL H2D", "sub_path": "filament/Bambu ASA-Aero @BBL H2D.json" @@ -1617,6 +1721,14 @@ "name": "Bambu ASA-CF @BBL A1 0.6 nozzle", "sub_path": "filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json" }, + { + "name": "Bambu ASA-CF @BBL H2", + "sub_path": "filament/Bambu ASA-CF @BBL H2.json" + }, + { + "name": "Bambu ASA-CF @BBL H2 0.6 nozzle", + "sub_path": "filament/Bambu ASA-CF @BBL H2 0.6 nozzle.json" + }, { "name": "Bambu ASA-CF @BBL H2D 0.4 nozzle", "sub_path": "filament/Bambu ASA-CF @BBL H2D 0.4 nozzle.json" @@ -1789,6 +1901,10 @@ "name": "Bambu PA-CF @BBL A1", "sub_path": "filament/Bambu PA-CF @BBL A1.json" }, + { + "name": "Bambu PA-CF @BBL H2", + "sub_path": "filament/Bambu PA-CF @BBL H2.json" + }, { "name": "Bambu PA-CF @BBL H2D", "sub_path": "filament/Bambu PA-CF @BBL H2D.json" @@ -1805,6 +1921,10 @@ "name": "Bambu PA6-CF @BBL A1", "sub_path": "filament/Bambu PA6-CF @BBL A1.json" }, + { + "name": "Bambu PA6-CF @BBL H2", + "sub_path": "filament/Bambu PA6-CF @BBL H2.json" + }, { "name": "Bambu PA6-CF @BBL H2D", "sub_path": "filament/Bambu PA6-CF @BBL H2D.json" @@ -1825,6 +1945,10 @@ "name": "Bambu PA6-GF @BBL A1", "sub_path": "filament/Bambu PA6-GF @BBL A1.json" }, + { + "name": "Bambu PA6-GF @BBL H2", + "sub_path": "filament/Bambu PA6-GF @BBL H2.json" + }, { "name": "Bambu PA6-GF @BBL H2D", "sub_path": "filament/Bambu PA6-GF @BBL H2D.json" @@ -1845,6 +1969,10 @@ "name": "Bambu PAHT-CF @BBL A1", "sub_path": "filament/Bambu PAHT-CF @BBL A1.json" }, + { + "name": "Bambu PAHT-CF @BBL H2", + "sub_path": "filament/Bambu PAHT-CF @BBL H2.json" + }, { "name": "Bambu PAHT-CF @BBL H2D", "sub_path": "filament/Bambu PAHT-CF @BBL H2D.json" @@ -1865,6 +1993,10 @@ "name": "Bambu Support For PA/PET @BBL A1", "sub_path": "filament/Bambu Support For PA PET @BBL A1.json" }, + { + "name": "Bambu Support For PA/PET @BBL H2", + "sub_path": "filament/Bambu Support For PA PET @BBL H2.json" + }, { "name": "Bambu Support For PA/PET @BBL H2D", "sub_path": "filament/Bambu Support For PA PET @BBL H2D.json" @@ -1885,6 +2017,10 @@ "name": "Bambu Support G @BBL A1", "sub_path": "filament/Bambu Support G @BBL A1.json" }, + { + "name": "Bambu Support G @BBL H2", + "sub_path": "filament/Bambu Support G @BBL H2.json" + }, { "name": "Bambu Support G @BBL H2D", "sub_path": "filament/Bambu Support G @BBL H2D.json" @@ -1961,6 +2097,14 @@ "name": "Bambu PC @BBL A1 0.2 nozzle", "sub_path": "filament/Bambu PC @BBL A1 0.2 nozzle.json" }, + { + "name": "Bambu PC @BBL H2", + "sub_path": "filament/Bambu PC @BBL H2.json" + }, + { + "name": "Bambu PC @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu PC @BBL H2 0.2 nozzle.json" + }, { "name": "Bambu PC @BBL H2D 0.2 nozzle", "sub_path": "filament/Bambu PC @BBL H2D 0.2 nozzle.json" @@ -2009,6 +2153,22 @@ "name": "Bambu PC FR @BBL A1 0.2 nozzle", "sub_path": "filament/Bambu PC FR @BBL A1 0.2 nozzle.json" }, + { + "name": "Bambu PC FR @BBL H2", + "sub_path": "filament/Bambu PC FR @BBL H2.json" + }, + { + "name": "Bambu PC FR @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu PC FR @BBL H2 0.2 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL H2 0.6 nozzle", + "sub_path": "filament/Bambu PC FR @BBL H2 0.6 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL H2 0.8 nozzle", + "sub_path": "filament/Bambu PC FR @BBL H2 0.8 nozzle.json" + }, { "name": "Bambu PC FR @BBL H2D 0.2 nozzle", "sub_path": "filament/Bambu PC FR @BBL H2D 0.2 nozzle.json" @@ -2113,6 +2273,14 @@ "name": "Generic PC @BBL A1 0.2 nozzle", "sub_path": "filament/Generic PC @BBL A1 0.2 nozzle.json" }, + { + "name": "Generic PC @BBL H2", + "sub_path": "filament/Generic PC @BBL H2.json" + }, + { + "name": "Generic PC @BBL H2 0.2 nozzle", + "sub_path": "filament/Generic PC @BBL H2 0.2 nozzle.json" + }, { "name": "Generic PC @BBL H2D", "sub_path": "filament/Generic PC @BBL H2D.json" @@ -2193,6 +2361,10 @@ "name": "Bambu PET-CF @BBL A1", "sub_path": "filament/Bambu PET-CF @BBL A1.json" }, + { + "name": "Bambu PET-CF @BBL H2", + "sub_path": "filament/Bambu PET-CF @BBL H2.json" + }, { "name": "Bambu PET-CF @BBL H2D", "sub_path": "filament/Bambu PET-CF @BBL H2D.json" @@ -2217,6 +2389,14 @@ "name": "Bambu PETG Basic @BBL A1 0.8 nozzle", "sub_path": "filament/Bambu PETG Basic @BBL A1 0.8 nozzle.json" }, + { + "name": "Bambu PETG Basic @BBL H2", + "sub_path": "filament/Bambu PETG Basic @BBL H2.json" + }, + { + "name": "Bambu PETG Basic @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL H2 0.2 nozzle.json" + }, { "name": "Bambu PETG Basic @BBL H2D 0.2 nozzle", "sub_path": "filament/Bambu PETG Basic @BBL H2D 0.2 nozzle.json" @@ -2277,6 +2457,14 @@ "name": "Bambu PETG HF @BBL A1M 0.8 nozzle", "sub_path": "filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json" }, + { + "name": "Bambu PETG HF @BBL H2", + "sub_path": "filament/Bambu PETG HF @BBL H2.json" + }, + { + "name": "Bambu PETG HF @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL H2 0.2 nozzle.json" + }, { "name": "Bambu PETG HF @BBL H2D 0.2 nozzle", "sub_path": "filament/Bambu PETG HF @BBL H2D 0.2 nozzle.json" @@ -2345,6 +2533,10 @@ "name": "Bambu PETG Translucent @BBL A1M 0.8 nozzle", "sub_path": "filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json" }, + { + "name": "Bambu PETG Translucent @BBL H2", + "sub_path": "filament/Bambu PETG Translucent @BBL H2.json" + }, { "name": "Bambu PETG Translucent @BBL H2D 0.2 nozzle", "sub_path": "filament/Bambu PETG Translucent @BBL H2D 0.2 nozzle.json" @@ -2393,6 +2585,10 @@ "name": "Bambu PETG-CF @BBL A1M", "sub_path": "filament/Bambu PETG-CF @BBL A1M.json" }, + { + "name": "Bambu PETG-CF @BBL H2", + "sub_path": "filament/Bambu PETG-CF @BBL H2.json" + }, { "name": "Bambu PETG-CF @BBL H2D 0.4 nozzle", "sub_path": "filament/Bambu PETG-CF @BBL H2D 0.4 nozzle.json" @@ -2473,6 +2669,14 @@ "name": "Generic PETG @BBL A1M 0.2 nozzle", "sub_path": "filament/Generic PETG @BBL A1M 0.2 nozzle.json" }, + { + "name": "Generic PETG @BBL H2", + "sub_path": "filament/Generic PETG @BBL H2.json" + }, + { + "name": "Generic PETG @BBL H2 0.2 nozzle", + "sub_path": "filament/Generic PETG @BBL H2 0.2 nozzle.json" + }, { "name": "Generic PETG @BBL H2D", "sub_path": "filament/Generic PETG @BBL H2D.json" @@ -2549,6 +2753,10 @@ "name": "Generic PETG-CF @BBL A1", "sub_path": "filament/Generic PETG-CF @BBL A1.json" }, + { + "name": "Generic PETG-CF @BBL H2", + "sub_path": "filament/Generic PETG-CF @BBL H2.json" + }, { "name": "Generic PETG-CF @BBL H2D", "sub_path": "filament/Generic PETG-CF @BBL H2D.json" @@ -2577,6 +2785,14 @@ "name": "PolyLite PETG @BBL A1M", "sub_path": "filament/Polymaker/PolyLite PETG @BBL A1M.json" }, + { + "name": "PolyLite PETG @BBL H2", + "sub_path": "filament/PolyLite PETG @BBL H2.json" + }, + { + "name": "PolyLite PETG @BBL H2 0.2 nozzle", + "sub_path": "filament/PolyLite PETG @BBL H2 0.2 nozzle.json" + }, { "name": "PolyLite PETG @BBL H2D", "sub_path": "filament/Polymaker/PolyLite PETG @BBL H2D.json" @@ -2649,6 +2865,10 @@ "name": "Bambu PLA Aero @BBL A1M", "sub_path": "filament/Bambu PLA Aero @BBL A1M.json" }, + { + "name": "Bambu PLA Aero @BBL H2", + "sub_path": "filament/Bambu PLA Aero @BBL H2.json" + }, { "name": "Bambu PLA Aero @BBL H2D", "sub_path": "filament/Bambu PLA Aero @BBL H2D.json" @@ -2685,6 +2905,14 @@ "name": "Bambu PLA Basic @BBL A1M 0.2 nozzle", "sub_path": "filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json" }, + { + "name": "Bambu PLA Basic @BBL H2", + "sub_path": "filament/Bambu PLA Basic @BBL H2.json" + }, + { + "name": "Bambu PLA Basic @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL H2 0.2 nozzle.json" + }, { "name": "Bambu PLA Basic @BBL H2D", "sub_path": "filament/Bambu PLA Basic @BBL H2D.json" @@ -2757,6 +2985,14 @@ "name": "Bambu PLA Dynamic @BBL A1M 0.2 nozzle", "sub_path": "filament/Bambu PLA Dynamic @BBL A1M 0.2 nozzle.json" }, + { + "name": "Bambu PLA Dynamic @BBL H2", + "sub_path": "filament/Bambu PLA Dynamic @BBL H2.json" + }, + { + "name": "Bambu PLA Dynamic @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL H2 0.2 nozzle.json" + }, { "name": "Bambu PLA Dynamic @BBL H2D", "sub_path": "filament/Bambu PLA Dynamic @BBL H2D.json" @@ -2817,6 +3053,14 @@ "name": "Bambu PLA Galaxy @BBL A1M 0.2 nozzle", "sub_path": "filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json" }, + { + "name": "Bambu PLA Galaxy @BBL H2", + "sub_path": "filament/Bambu PLA Galaxy @BBL H2.json" + }, + { + "name": "Bambu PLA Galaxy @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL H2 0.2 nozzle.json" + }, { "name": "Bambu PLA Galaxy @BBL H2D", "sub_path": "filament/Bambu PLA Galaxy @BBL H2D.json" @@ -2877,6 +3121,14 @@ "name": "Bambu PLA Glow @BBL A1M 0.2 nozzle", "sub_path": "filament/Bambu PLA Glow @BBL A1M 0.2 nozzle.json" }, + { + "name": "Bambu PLA Glow @BBL H2", + "sub_path": "filament/Bambu PLA Glow @BBL H2.json" + }, + { + "name": "Bambu PLA Glow @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL H2 0.2 nozzle.json" + }, { "name": "Bambu PLA Glow @BBL H2D", "sub_path": "filament/Bambu PLA Glow @BBL H2D.json" @@ -2917,6 +3169,18 @@ "name": "Bambu PLA Lite @BBL A1M 0.2 nozzle", "sub_path": "filament/Bambu PLA Lite @BBL A1M 0.2 nozzle.json" }, + { + "name": "Bambu PLA Lite @BBL H2", + "sub_path": "filament/Bambu PLA Lite @BBL H2.json" + }, + { + "name": "Bambu PLA Lite @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL H2 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL H2 0.8 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL H2 0.8 nozzle.json" + }, { "name": "Bambu PLA Lite @BBL H2D", "sub_path": "filament/Bambu PLA Lite @BBL H2D.json" @@ -2973,6 +3237,10 @@ "name": "Bambu PLA Marble @BBL A1M", "sub_path": "filament/Bambu PLA Marble @BBL A1M.json" }, + { + "name": "Bambu PLA Marble @BBL H2", + "sub_path": "filament/Bambu PLA Marble @BBL H2.json" + }, { "name": "Bambu PLA Marble @BBL H2D", "sub_path": "filament/Bambu PLA Marble @BBL H2D.json" @@ -3009,6 +3277,14 @@ "name": "Bambu PLA Matte @BBL A1M 0.2 nozzle", "sub_path": "filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json" }, + { + "name": "Bambu PLA Matte @BBL H2", + "sub_path": "filament/Bambu PLA Matte @BBL H2.json" + }, + { + "name": "Bambu PLA Matte @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL H2 0.2 nozzle.json" + }, { "name": "Bambu PLA Matte @BBL H2D", "sub_path": "filament/Bambu PLA Matte @BBL H2D.json" @@ -3081,6 +3357,14 @@ "name": "Bambu PLA Metal @BBL A1M 0.2 nozzle", "sub_path": "filament/Bambu PLA Metal @BBL A1M 0.2 nozzle.json" }, + { + "name": "Bambu PLA Metal @BBL H2", + "sub_path": "filament/Bambu PLA Metal @BBL H2.json" + }, + { + "name": "Bambu PLA Metal @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL H2 0.2 nozzle.json" + }, { "name": "Bambu PLA Metal @BBL H2D", "sub_path": "filament/Bambu PLA Metal @BBL H2D.json" @@ -3133,6 +3417,14 @@ "name": "Bambu PLA Silk @BBL A1M 0.2 nozzle", "sub_path": "filament/Bambu PLA Silk @BBL A1M 0.2 nozzle.json" }, + { + "name": "Bambu PLA Silk @BBL H2", + "sub_path": "filament/Bambu PLA Silk @BBL H2.json" + }, + { + "name": "Bambu PLA Silk @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL H2 0.2 nozzle.json" + }, { "name": "Bambu PLA Silk @BBL H2D", "sub_path": "filament/Bambu PLA Silk @BBL H2D.json" @@ -3185,6 +3477,14 @@ "name": "Bambu PLA Silk+ @BBL A1M 0.2 nozzle", "sub_path": "filament/Bambu PLA Silk+ @BBL A1M 0.2 nozzle.json" }, + { + "name": "Bambu PLA Silk+ @BBL H2", + "sub_path": "filament/Bambu PLA Silk+ @BBL H2.json" + }, + { + "name": "Bambu PLA Silk+ @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL H2 0.2 nozzle.json" + }, { "name": "Bambu PLA Silk+ @BBL H2D", "sub_path": "filament/Bambu PLA Silk+ @BBL H2D.json" @@ -3229,6 +3529,10 @@ "name": "Bambu PLA Sparkle @BBL A1M", "sub_path": "filament/Bambu PLA Sparkle @BBL A1M.json" }, + { + "name": "Bambu PLA Sparkle @BBL H2", + "sub_path": "filament/Bambu PLA Sparkle @BBL H2.json" + }, { "name": "Bambu PLA Sparkle @BBL H2D", "sub_path": "filament/Bambu PLA Sparkle @BBL H2D.json" @@ -3265,6 +3569,14 @@ "name": "Bambu PLA Tough @BBL A1M 0.2 nozzle", "sub_path": "filament/Bambu PLA Tough @BBL A1M 0.2 nozzle.json" }, + { + "name": "Bambu PLA Tough @BBL H2", + "sub_path": "filament/Bambu PLA Tough @BBL H2.json" + }, + { + "name": "Bambu PLA Tough @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough @BBL H2 0.2 nozzle.json" + }, { "name": "Bambu PLA Tough @BBL H2D", "sub_path": "filament/Bambu PLA Tough @BBL H2D.json" @@ -3397,6 +3709,18 @@ "name": "Bambu PLA Translucent @BBL A1M 0.8 nozzle", "sub_path": "filament/Bambu PLA Translucent @BBL A1M 0.8 nozzle.json" }, + { + "name": "Bambu PLA Translucent @BBL H2", + "sub_path": "filament/Bambu PLA Translucent @BBL H2.json" + }, + { + "name": "Bambu PLA Translucent @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL H2 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL H2 0.8 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL H2 0.8 nozzle.json" + }, { "name": "Bambu PLA Translucent @BBL H2D", "sub_path": "filament/Bambu PLA Translucent @BBL H2D.json" @@ -3453,6 +3777,14 @@ "name": "Bambu PLA Wood @BBL A1M", "sub_path": "filament/Bambu PLA Wood @BBL A1M.json" }, + { + "name": "Bambu PLA Wood @BBL H2", + "sub_path": "filament/Bambu PLA Wood @BBL H2.json" + }, + { + "name": "Bambu PLA Wood @BBL H2 0.8 nozzle", + "sub_path": "filament/Bambu PLA Wood @BBL H2 0.8 nozzle.json" + }, { "name": "Bambu PLA Wood @BBL H2D", "sub_path": "filament/Bambu PLA Wood @BBL H2D.json" @@ -3501,6 +3833,10 @@ "name": "Bambu PLA-CF @BBL A1M 0.8 nozzle", "sub_path": "filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json" }, + { + "name": "Bambu PLA-CF @BBL H2", + "sub_path": "filament/Bambu PLA-CF @BBL H2.json" + }, { "name": "Bambu PLA-CF @BBL H2D 0.4 nozzle", "sub_path": "filament/Bambu PLA-CF @BBL H2D 0.4 nozzle.json" @@ -3549,6 +3885,14 @@ "name": "Bambu Support For PLA @BBL A1M 0.2 nozzle", "sub_path": "filament/Bambu Support For PLA @BBL A1M 0.2 nozzle.json" }, + { + "name": "Bambu Support For PLA @BBL H2", + "sub_path": "filament/Bambu Support For PLA @BBL H2.json" + }, + { + "name": "Bambu Support For PLA @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL H2 0.2 nozzle.json" + }, { "name": "Bambu Support For PLA @BBL H2D", "sub_path": "filament/Bambu Support For PLA @BBL H2D.json" @@ -3597,6 +3941,14 @@ "name": "Bambu Support For PLA/PETG @BBL A1M 0.2 nozzle", "sub_path": "filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json" }, + { + "name": "Bambu Support For PLA/PETG @BBL H2", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2 0.2 nozzle.json" + }, { "name": "Bambu Support For PLA/PETG @BBL H2D", "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2D.json" @@ -3645,6 +3997,14 @@ "name": "Bambu Support W @BBL A1M 0.2 nozzle", "sub_path": "filament/Bambu Support W @BBL A1M 0.2 nozzle.json" }, + { + "name": "Bambu Support W @BBL H2", + "sub_path": "filament/Bambu Support W @BBL H2.json" + }, + { + "name": "Bambu Support W @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu Support W @BBL H2 0.2 nozzle.json" + }, { "name": "Bambu Support W @BBL H2D", "sub_path": "filament/Bambu Support W @BBL H2D.json" @@ -3705,6 +4065,14 @@ "name": "Generic PLA @BBL A1M 0.2 nozzle", "sub_path": "filament/Generic PLA @BBL A1M 0.2 nozzle.json" }, + { + "name": "Generic PLA @BBL H2", + "sub_path": "filament/Generic PLA @BBL H2.json" + }, + { + "name": "Generic PLA @BBL H2 0.2 nozzle", + "sub_path": "filament/Generic PLA @BBL H2 0.2 nozzle.json" + }, { "name": "Generic PLA @BBL H2D", "sub_path": "filament/Generic PLA @BBL H2D.json" @@ -3741,6 +4109,14 @@ "name": "Generic PLA High Speed @BBL A1M", "sub_path": "filament/Generic PLA High Speed @BBL A1M.json" }, + { + "name": "Generic PLA High Speed @BBL H2", + "sub_path": "filament/Generic PLA High Speed @BBL H2.json" + }, + { + "name": "Generic PLA High Speed @BBL H2 0.2 nozzle", + "sub_path": "filament/Generic PLA High Speed @BBL H2 0.2 nozzle.json" + }, { "name": "Generic PLA High Speed @BBL H2D", "sub_path": "filament/Generic PLA High Speed @BBL H2D.json" @@ -3773,6 +4149,10 @@ "name": "Generic PLA Silk @BBL A1M", "sub_path": "filament/Generic PLA Silk @BBL A1M.json" }, + { + "name": "Generic PLA Silk @BBL H2", + "sub_path": "filament/Generic PLA Silk @BBL H2.json" + }, { "name": "Generic PLA Silk @BBL H2D", "sub_path": "filament/Generic PLA Silk @BBL H2D.json" @@ -3797,6 +4177,10 @@ "name": "Generic PLA-CF @BBL A1M", "sub_path": "filament/Generic PLA-CF @BBL A1M.json" }, + { + "name": "Generic PLA-CF @BBL H2", + "sub_path": "filament/Generic PLA-CF @BBL H2.json" + }, { "name": "Generic PLA-CF @BBL H2D", "sub_path": "filament/Generic PLA-CF @BBL H2D.json" @@ -3821,6 +4205,14 @@ "name": "Overture Matte PLA @BBL A1M", "sub_path": "filament/Overture/Overture Matte PLA @BBL A1M.json" }, + { + "name": "Overture Matte PLA @BBL H2", + "sub_path": "filament/Overture Matte PLA @BBL H2.json" + }, + { + "name": "Overture Matte PLA @BBL H2 0.2 nozzle", + "sub_path": "filament/Overture Matte PLA @BBL H2 0.2 nozzle.json" + }, { "name": "Overture Matte PLA @BBL H2D", "sub_path": "filament/Overture Matte PLA @BBL H2D.json" @@ -3857,6 +4249,14 @@ "name": "Overture PLA @BBL A1M", "sub_path": "filament/Overture/Overture PLA @BBL A1M.json" }, + { + "name": "Overture PLA @BBL H2", + "sub_path": "filament/Overture PLA @BBL H2.json" + }, + { + "name": "Overture PLA @BBL H2 0.2 nozzle", + "sub_path": "filament/Overture PLA @BBL H2 0.2 nozzle.json" + }, { "name": "Overture PLA @BBL H2D", "sub_path": "filament/Overture PLA @BBL H2D.json" @@ -4577,6 +4977,14 @@ "name": "PolyLite PLA @BBL A1M 0.2 nozzle", "sub_path": "filament/Polymaker/PolyLite PLA @BBL A1M 0.2 nozzle.json" }, + { + "name": "PolyLite PLA @BBL H2", + "sub_path": "filament/PolyLite PLA @BBL H2.json" + }, + { + "name": "PolyLite PLA @BBL H2 0.2 nozzle", + "sub_path": "filament/PolyLite PLA @BBL H2 0.2 nozzle.json" + }, { "name": "PolyLite PLA @BBL H2D", "sub_path": "filament/Polymaker/PolyLite PLA @BBL H2D.json" @@ -4657,6 +5065,14 @@ "name": "PolyTerra PLA @BBL A1M 0.2 nozzle", "sub_path": "filament/Polymaker/PolyTerra PLA @BBL A1M 0.2 nozzle.json" }, + { + "name": "PolyTerra PLA @BBL H2", + "sub_path": "filament/PolyTerra PLA @BBL H2.json" + }, + { + "name": "PolyTerra PLA @BBL H2 0.2 nozzle", + "sub_path": "filament/PolyTerra PLA @BBL H2 0.2 nozzle.json" + }, { "name": "PolyTerra PLA @BBL H2D", "sub_path": "filament/Polymaker/PolyTerra PLA @BBL H2D.json" @@ -4961,6 +5377,14 @@ "name": "eSUN PLA+ @BBL A1M 0.2 nozzle", "sub_path": "filament/eSUN/eSUN PLA+ @BBL A1M 0.2 nozzle.json" }, + { + "name": "eSUN PLA+ @BBL H2", + "sub_path": "filament/eSUN PLA+ @BBL H2.json" + }, + { + "name": "eSUN PLA+ @BBL H2 0.2 nozzle", + "sub_path": "filament/eSUN PLA+ @BBL H2 0.2 nozzle.json" + }, { "name": "eSUN PLA+ @BBL H2D", "sub_path": "filament/eSUN/eSUN PLA+ @BBL H2D.json" @@ -5049,6 +5473,10 @@ "name": "Generic PP-GF @BBL X1C", "sub_path": "filament/Generic PP-GF @BBL X1C.json" }, + { + "name": "Bambu PPA-CF @BBL H2", + "sub_path": "filament/Bambu PPA-CF @BBL H2.json" + }, { "name": "Bambu PPA-CF @BBL H2D", "sub_path": "filament/Bambu PPA-CF @BBL H2D.json" @@ -5097,6 +5525,10 @@ "name": "Generic PPA-GF @BBL X1E", "sub_path": "filament/Generic PPA-GF @BBL X1E.json" }, + { + "name": "Bambu PPS-CF @BBL H2", + "sub_path": "filament/Bambu PPS-CF @BBL H2.json" + }, { "name": "Bambu PPS-CF @BBL H2D", "sub_path": "filament/Bambu PPS-CF @BBL H2D.json" @@ -5149,6 +5581,14 @@ "name": "Bambu PVA @BBL A1M 0.2 nozzle", "sub_path": "filament/Bambu PVA @BBL A1M 0.2 nozzle.json" }, + { + "name": "Bambu PVA @BBL H2", + "sub_path": "filament/Bambu PVA @BBL H2.json" + }, + { + "name": "Bambu PVA @BBL H2 0.2 nozzle", + "sub_path": "filament/Bambu PVA @BBL H2 0.2 nozzle.json" + }, { "name": "Bambu PVA @BBL H2D", "sub_path": "filament/Bambu PVA @BBL H2D.json" @@ -5217,6 +5657,10 @@ "name": "Generic SBS", "sub_path": "filament/Generic SBS.json" }, + { + "name": "Bambu TPU 85A @BBL H2", + "sub_path": "filament/Bambu TPU 85A @BBL H2.json" + }, { "name": "Bambu TPU 85A @BBL H2D", "sub_path": "filament/Bambu TPU 85A @BBL H2D.json" @@ -5241,6 +5685,10 @@ "name": "Bambu TPU 90A @BBL A1M", "sub_path": "filament/Bambu TPU 90A @BBL A1M.json" }, + { + "name": "Bambu TPU 90A @BBL H2", + "sub_path": "filament/Bambu TPU 90A @BBL H2.json" + }, { "name": "Bambu TPU 90A @BBL H2D", "sub_path": "filament/Bambu TPU 90A @BBL H2D.json" @@ -5265,6 +5713,10 @@ "name": "Bambu TPU 95A @BBL A1M", "sub_path": "filament/Bambu TPU 95A @BBL A1M.json" }, + { + "name": "Bambu TPU 95A @BBL H2", + "sub_path": "filament/Bambu TPU 95A @BBL H2.json" + }, { "name": "Bambu TPU 95A @BBL H2D", "sub_path": "filament/Bambu TPU 95A @BBL H2D.json" @@ -5293,6 +5745,10 @@ "name": "Bambu TPU 95A HF @BBL A1M", "sub_path": "filament/Bambu TPU 95A HF @BBL A1M.json" }, + { + "name": "Bambu TPU 95A HF @BBL H2", + "sub_path": "filament/Bambu TPU 95A HF @BBL H2.json" + }, { "name": "Bambu TPU 95A HF @BBL H2D", "sub_path": "filament/Bambu TPU 95A HF @BBL H2D.json" @@ -5329,6 +5785,10 @@ "name": "Bambu TPU for AMS @BBL A1M", "sub_path": "filament/Bambu TPU for AMS @BBL A1M.json" }, + { + "name": "Bambu TPU for AMS @BBL H2", + "sub_path": "filament/Bambu TPU for AMS @BBL H2.json" + }, { "name": "Bambu TPU for AMS @BBL H2D", "sub_path": "filament/Bambu TPU for AMS @BBL H2D.json" @@ -5369,6 +5829,10 @@ "name": "Generic TPU for AMS @BBL A1M", "sub_path": "filament/Generic TPU for AMS @BBL A1M.json" }, + { + "name": "Generic TPU for AMS @BBL H2", + "sub_path": "filament/Generic TPU for AMS @BBL H2.json" + }, { "name": "Generic TPU for AMS @BBL H2D", "sub_path": "filament/Generic TPU for AMS @BBL H2D.json" @@ -5761,6 +6225,10 @@ "name": "Generic TPU @BBL A1M", "sub_path": "filament/Generic TPU @BBL A1M.json" }, + { + "name": "Generic TPU @BBL H2", + "sub_path": "filament/Generic TPU @BBL H2.json" + }, { "name": "PolyLite ABS @BBL H2DP 0.2 nozzle", "sub_path": "filament/PolyLite ABS @BBL H2DP 0.2 nozzle.json" @@ -5797,6 +6265,10 @@ "name": "AliZ PLA @P1-X1", "sub_path": "filament/AliZ/AliZ PLA @P1-X1.json" }, + { + "name": "Bambu PPA-GF @BBL H2", + "sub_path": "filament/Bambu PPA-GF @BBL H2.json" + }, { "name": "Overture ASA @BBL X1", "sub_path": "filament/Overture/Overture ASA @BBL X1.json" @@ -6079,6 +6551,10 @@ "name": "Bambu Lab A1 mini 0.4 nozzle", "sub_path": "machine/Bambu Lab A1 mini 0.4 nozzle.json" }, + { + "name": "Bambu Lab H2 0.4 nozzle", + "sub_path": "machine/Bambu Lab H2 0.4 nozzle.json" + }, { "name": "Bambu Lab P1P 0.4 nozzle", "sub_path": "machine/Bambu Lab P1P 0.4 nozzle.json" @@ -6131,6 +6607,18 @@ "name": "Bambu Lab A1 mini 0.8 nozzle", "sub_path": "machine/Bambu Lab A1 mini 0.8 nozzle.json" }, + { + "name": "Bambu Lab H2 0.2 nozzle", + "sub_path": "machine/Bambu Lab H2 0.2 nozzle.json" + }, + { + "name": "Bambu Lab H2 0.6 nozzle", + "sub_path": "machine/Bambu Lab H2 0.6 nozzle.json" + }, + { + "name": "Bambu Lab H2 0.8 nozzle", + "sub_path": "machine/Bambu Lab H2 0.8 nozzle.json" + }, { "name": "Bambu Lab P1P 0.2 nozzle", "sub_path": "machine/Bambu Lab P1P 0.2 nozzle.json" diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2 0.2 nozzle.json index a66c31df559..f1e59ae652f 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2 0.2 nozzle.json @@ -9,15 +9,19 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "2", "2" ], "filament_retraction_distances_when_cut": [ + "18", "18" ], "filament_z_hop_types": [ + "Spiral Lift", "Spiral Lift" ], "overhang_fan_speed": [ @@ -28,5 +32,85 @@ ], "compatible_printers": [ "Bambu Lab H2 0.2 nozzle" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2 0.8 nozzle.json index 3db843642ed..e494bbd7a09 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2 0.8 nozzle.json @@ -9,18 +9,23 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "18", "18" ], "filament_retraction_distances_when_cut": [ + "18", "18" ], "filament_z_hop_types": [ + "Spiral Lift", "Spiral Lift" ], "nozzle_temperature": [ + "260", "260" ], "overhang_fan_speed": [ @@ -34,5 +39,81 @@ ], "compatible_printers": [ "Bambu Lab H2 0.8 nozzle" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2.json index 9f8615c1212..5cad0a08417 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2.json @@ -9,15 +9,19 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "16", "16" ], "filament_retraction_distances_when_cut": [ + "18", "18" ], "filament_z_hop_types": [ + "Spiral Lift", "Spiral Lift" ], "overhang_fan_speed": [ @@ -29,5 +33,85 @@ "compatible_printers": [ "Bambu Lab H2 0.4 nozzle", "Bambu Lab H2 0.6 nozzle" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2.json index 57686a758d8..ddb906b70a3 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2.json @@ -9,14 +9,104 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_retraction_distances_when_cut": [ + "18", "18" ], "compatible_printers": [ "Bambu Lab H2 0.4 nozzle", "Bambu Lab H2 0.6 nozzle", "Bambu Lab H2 0.8 nozzle" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2 0.2 nozzle.json index d9eb101e776..9d6bcbc315e 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2 0.2 nozzle.json @@ -12,15 +12,19 @@ "70" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "2", "2" ], "filament_retraction_distances_when_cut": [ + "18", "18" ], "filament_z_hop_types": [ + "Spiral Lift", "Spiral Lift" ], "overhang_fan_speed": [ @@ -31,5 +35,85 @@ ], "compatible_printers": [ "Bambu Lab H2 0.2 nozzle" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2 0.6 nozzle.json index 2e68eb9d0a6..be241b1eb6f 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2 0.6 nozzle.json @@ -12,12 +12,15 @@ "70" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_retraction_distances_when_cut": [ + "18", "18" ], "filament_z_hop_types": [ + "Spiral Lift", "Spiral Lift" ], "overhang_fan_speed": [ @@ -29,5 +32,89 @@ "compatible_printers": [ "Bambu Lab H2 0.6 nozzle", "Bambu Lab H2 0.8 nozzle" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2.json index d8f5a619ae9..f3725b61950 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2.json @@ -12,15 +12,19 @@ "70" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "16", "16" ], "filament_retraction_distances_when_cut": [ + "18", "18" ], "filament_z_hop_types": [ + "Spiral Lift", "Spiral Lift" ], "overhang_fan_speed": [ @@ -31,5 +35,85 @@ ], "compatible_printers": [ "Bambu Lab H2 0.4 nozzle" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2.json index 74af3604af0..ac087565cc3 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2.json @@ -14,6 +14,99 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.52", + "0.52" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retraction_length": [ + "1.5", + "1.5" + ], + "filament_wipe_distance": [ + "5", + "5" + ], + "filament_z_hop_types": [ + "Normal Lift", + "Normal Lift" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2 0.6 nozzle.json index 7e1ae55e553..e8b21d5f109 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2 0.6 nozzle.json @@ -13,6 +13,99 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.9", + "0.9" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2.json index 94a36baaab9..4106a0c28dd 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2.json @@ -12,6 +12,99 @@ "Bambu Lab H2 0.4 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.9", + "0.9" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2.json index e4197c53e50..56a104b3118 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2.json @@ -21,9 +21,11 @@ "2" ], "nozzle_temperature": [ + "290", "290" ], "nozzle_temperature_initial_layer": [ + "290", "290" ], "compatible_printers": [ @@ -32,6 +34,91 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2.json index 828624ce689..668f956628a 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2.json @@ -14,6 +14,99 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2.json b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2.json index d46356f494f..1a8a698c910 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2.json @@ -9,12 +9,15 @@ "60" ], "filament_max_volumetric_speed": [ + "10.5", "10.5" ], "nozzle_temperature": [ + "265", "265" ], "nozzle_temperature_initial_layer": [ + "265", "265" ], "compatible_printers": [ @@ -23,6 +26,87 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2.json index 5f8d669ac1a..a367a84c7bd 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2.json @@ -14,6 +14,99 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2 0.2 nozzle.json index b8cc5c144c5..c83127f8ea3 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2 0.2 nozzle.json @@ -9,9 +9,11 @@ "40" ], "filament_max_volumetric_speed": [ + "1", "1" ], "nozzle_temperature": [ + "260", "260" ], "slow_down_layer_time": [ @@ -24,6 +26,91 @@ "; filament start gcode\nM145 P1" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2.json index 42ce90a9fe1..3b65350bbd5 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2.json @@ -23,6 +23,99 @@ "; filament start gcode\nM145 P1" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2 0.2 nozzle.json index d2168e6e208..700013e363e 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2 0.2 nozzle.json @@ -12,9 +12,11 @@ "40" ], "filament_max_volumetric_speed": [ + "1", "1" ], "nozzle_temperature": [ + "260", "260" ], "slow_down_layer_time": [ @@ -24,6 +26,91 @@ "Bambu Lab H2 0.2 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2 0.6 nozzle.json index f87ef11eda8..acc734fd63f 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2 0.6 nozzle.json @@ -12,6 +12,7 @@ "40" ], "nozzle_temperature": [ + "260", "260" ], "slow_down_layer_time": [ @@ -21,6 +22,95 @@ "Bambu Lab H2 0.6 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2 0.8 nozzle.json index 46c8272dfe1..d5aff25a0e5 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2 0.8 nozzle.json @@ -12,6 +12,7 @@ "40" ], "nozzle_temperature": [ + "260", "260" ], "slow_down_layer_time": [ @@ -21,6 +22,95 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2.json index b1edc35b834..2d24ded3439 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2.json @@ -18,6 +18,99 @@ "Bambu Lab H2 0.4 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2.json index ebd5ab4ee64..4de4badab06 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFST01_04", "instantiation": "true", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "60" ], @@ -21,6 +20,99 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2 0.2 nozzle.json index 521a78769ed..e0a4f55ef85 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2 0.2 nozzle.json @@ -5,14 +5,16 @@ "from": "system", "setting_id": "GFSG00_11", "instantiation": "true", - "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "1", "1" ], "filament_retraction_distances_when_cut": [ + "10", "10" ], "compatible_printers": [ @@ -20,5 +22,89 @@ ], "filament_start_gcode": [ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2.json index c2065a78563..3eef4d71ce5 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2.json @@ -5,14 +5,16 @@ "from": "system", "setting_id": "GFSG00_10", "instantiation": "true", - "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "13", "13" ], "filament_retraction_distances_when_cut": [ + "10", "10" ], "compatible_printers": [ @@ -22,5 +24,89 @@ ], "filament_start_gcode": [ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2 0.2 nozzle.json index b46a70cd9f8..4fa4882b7dc 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2 0.2 nozzle.json @@ -12,12 +12,15 @@ "20" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "1", "1" ], "filament_retraction_distances_when_cut": [ + "10", "10" ], "overhang_fan_speed": [ @@ -34,5 +37,89 @@ ], "filament_start_gcode": [ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2.json index 4699d5851dd..ad72dd9c9bd 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2.json @@ -9,15 +9,19 @@ "20" ], "filament_flow_ratio": [ + "0.96", "0.96" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_retraction_distances_when_cut": [ + "10", "10" ], "nozzle_temperature": [ + "230", "230" ], "overhang_fan_speed": [ @@ -36,5 +40,85 @@ ], "filament_start_gcode": [ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2.json index dbb9dc0bee2..73223b0b552 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2.json @@ -5,14 +5,16 @@ "from": "system", "setting_id": "GFSG01_08", "instantiation": "true", - "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_retraction_distances_when_cut": [ + "10", "10" ], "filament_retraction_length": [ + "0.3", "0.3" ], "slow_down_layer_time": [ @@ -25,5 +27,89 @@ ], "filament_start_gcode": [ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2.json index 011f91cf20a..510291d028b 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2.json @@ -15,12 +15,15 @@ "5" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "11.5", "11.5" ], "filament_retraction_distances_when_cut": [ + "10", "10" ], "overhang_fan_speed": [ @@ -33,5 +36,89 @@ ], "filament_start_gcode": [ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2.json index d957f821a38..610334a214e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSA11_07", "instantiation": "true", - "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: Instructions for printing RC model with foaming PLA (PLA Aero).", "additional_cooling_fan_speed": [ "0" ], @@ -21,6 +20,99 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.6", + "0.6" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2 0.2 nozzle.json index 129a5c5781f..512aba90d5c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2 0.2 nozzle.json @@ -15,12 +15,15 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "2", "2" ], "filament_retraction_distances_when_cut": [ + "10", "10" ], "compatible_printers": [ @@ -28,5 +31,89 @@ ], "filament_start_gcode": [ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2.json index 21a8bba8c5c..c9aac6af9db 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2.json @@ -15,9 +15,11 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_retraction_distances_when_cut": [ + "10", "10" ], "slow_down_layer_time": [ @@ -30,5 +32,93 @@ ], "filament_start_gcode": [ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2 0.2 nozzle.json index a108d57d02f..a32d20d612c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2 0.2 nozzle.json @@ -15,9 +15,11 @@ "60" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_max_volumetric_speed": [ + "2", "2" ], "slow_down_layer_time": [ @@ -33,6 +35,91 @@ "; filament end gcode \n;M106 P3 S0\n" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2.json index 7070bdc3937..5ab1ea0cf57 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2.json @@ -15,9 +15,11 @@ "60" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_max_volumetric_speed": [ + "21", "21" ], "slow_down_layer_time": [ @@ -35,6 +37,91 @@ "; filament end gcode \n;M106 P3 S0\n" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2 0.2 nozzle.json index c09663bc043..220505d25c9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2 0.2 nozzle.json @@ -15,12 +15,15 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "2", "2" ], "filament_retraction_distances_when_cut": [ + "10", "10" ], "slow_down_layer_time": [ @@ -31,5 +34,89 @@ ], "filament_start_gcode": [ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2.json index 7ab98c4ca40..96dc50334c4 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2.json @@ -15,9 +15,11 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_retraction_distances_when_cut": [ + "10", "10" ], "slow_down_layer_time": [ @@ -33,5 +35,93 @@ ], "filament_end_gcode": [ "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2 0.2 nozzle.json index c42949fac3e..b2b50b96f09 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2 0.2 nozzle.json @@ -15,12 +15,15 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "1", "1" ], "filament_retraction_distances_when_cut": [ + "10", "10" ], "slow_down_layer_time": [ @@ -31,5 +34,89 @@ ], "filament_start_gcode": [ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2.json index 0a666c66b18..b6c24d97900 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2.json @@ -15,9 +15,11 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_retraction_distances_when_cut": [ + "10", "10" ], "slow_down_layer_time": [ @@ -33,5 +35,93 @@ ], "filament_end_gcode": [ "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2 0.2 nozzle.json index 4b0f47513e3..f7e837323c5 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2 0.2 nozzle.json @@ -15,18 +15,23 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "2", "2" ], "filament_retraction_distances_when_cut": [ + "18", "18" ], "nozzle_temperature": [ + "220", "220" ], "nozzle_temperature_initial_layer": [ + "220", "220" ], "slow_down_layer_time": [ @@ -37,5 +42,81 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2 0.8 nozzle.json index b60241101e9..6de7cf9f491 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2 0.8 nozzle.json @@ -15,9 +15,11 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_retraction_distances_when_cut": [ + "18", "18" ], "slow_down_layer_time": [ @@ -28,5 +30,93 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2.json index b57a63e0f3c..2381afaee3e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2.json @@ -15,9 +15,11 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_retraction_distances_when_cut": [ + "18", "18" ], "slow_down_layer_time": [ @@ -29,5 +31,93 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2.json index 1591832b871..414e2a23249 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2.json @@ -15,9 +15,11 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_retraction_distances_when_cut": [ + "10", "10" ], "slow_down_layer_time": [ @@ -30,5 +32,93 @@ ], "filament_start_gcode": [ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2 0.2 nozzle.json index 3ce1b4e744f..d492f6a1e49 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2 0.2 nozzle.json @@ -15,12 +15,15 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "2", "2" ], "filament_retraction_distances_when_cut": [ + "10", "10" ], "compatible_printers": [ @@ -28,5 +31,89 @@ ], "filament_start_gcode": [ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2.json index d905d64f403..e29d9c09570 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2.json @@ -15,12 +15,15 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "22", "22" ], "filament_retraction_distances_when_cut": [ + "10", "10" ], "slow_down_layer_time": [ @@ -33,5 +36,89 @@ ], "filament_start_gcode": [ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2 0.2 nozzle.json index 39d83d2771c..fb4866d9615 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2 0.2 nozzle.json @@ -15,6 +15,7 @@ "60" ], "filament_max_volumetric_speed": [ + "2", "2" ], "slow_down_layer_time": [ @@ -27,6 +28,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2.json index c6f0dc9e744..dd2abacb2b1 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2.json @@ -15,6 +15,7 @@ "60" ], "filament_max_volumetric_speed": [ + "21", "21" ], "slow_down_layer_time": [ @@ -29,6 +30,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2 0.2 nozzle.json index 856884f9f54..184ccaa4865 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2 0.2 nozzle.json @@ -5,11 +5,11 @@ "from": "system", "setting_id": "GFSA05_09", "instantiation": "true", - "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "additional_cooling_fan_speed": [ "75" ], "filament_max_volumetric_speed": [ + "2", "2" ], "compatible_printers": [ @@ -19,6 +19,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2.json index e17ec4bc4f9..99bdc32327f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSA05_08", "instantiation": "true", - "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "additional_cooling_fan_speed": [ "75" ], @@ -24,6 +23,99 @@ "; filament end gcode \n" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2 0.2 nozzle.json index a9e184c4fdb..e0da3018784 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2 0.2 nozzle.json @@ -9,6 +9,7 @@ "75" ], "filament_max_volumetric_speed": [ + "2", "2" ], "slow_down_layer_time": [ @@ -27,6 +28,95 @@ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2.json index 00c32833fcf..785233e0287 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2.json @@ -26,6 +26,99 @@ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2.json index 714b8fd73aa..10d6f23d97d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2.json @@ -26,6 +26,99 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2 0.2 nozzle.json index e669081222b..098e87b6d5c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2 0.2 nozzle.json @@ -15,6 +15,7 @@ "60" ], "filament_max_volumetric_speed": [ + "2", "2" ], "slow_down_layer_time": [ @@ -27,6 +28,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2.json index ee3875df520..ab615fd74b3 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2.json @@ -15,6 +15,7 @@ "60" ], "filament_max_volumetric_speed": [ + "21", "21" ], "slow_down_layer_time": [ @@ -29,6 +30,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2 0.2 nozzle.json index f4eb3f02ca7..f2b4b0534b5 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2 0.2 nozzle.json @@ -6,9 +6,11 @@ "setting_id": "GFSA17_16", "instantiation": "true", "filament_max_volumetric_speed": [ + "1.6", "1.6" ], "filament_retract_before_wipe": [ + "0", "0" ], "nozzle_temperature_range_low": [ @@ -21,6 +23,91 @@ "Bambu Lab H2 0.2 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2 0.8 nozzle.json index c7e5aab1fc6..21e7e5aa7d0 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2 0.8 nozzle.json @@ -6,6 +6,7 @@ "setting_id": "GFSA17_17", "instantiation": "true", "filament_retract_before_wipe": [ + "0", "0" ], "nozzle_temperature_range_low": [ @@ -19,6 +20,95 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2.json index bf472ddc3d7..8288658cde4 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2.json @@ -7,6 +7,7 @@ "instantiation": "true", "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", "filament_retract_before_wipe": [ + "0", "0" ], "nozzle_temperature_range_low": [ @@ -19,6 +20,95 @@ "Bambu Lab H2 0.4 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2 0.8 nozzle.json index 6ce18edc3fe..f2e07c0f46b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2 0.8 nozzle.json @@ -21,6 +21,99 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2.json index 81ceb3461c0..f5ef2cbd855 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2.json @@ -22,6 +22,99 @@ "Bambu Lab H2 0.6 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2.json index 45a0508475a..4a4b78e8313 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2.json @@ -6,18 +6,23 @@ "setting_id": "GFSA50_07", "instantiation": "true", "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "15", "15" ], "filament_retraction_distances_when_cut": [ + "10", "10" ], "nozzle_temperature": [ + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", "230" ], "compatible_printers": [ @@ -27,5 +32,81 @@ ], "filament_start_gcode": [ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2.json b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2.json index 442053e8cfc..a70b92a3d91 100644 --- a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2.json @@ -14,6 +14,99 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPA-GF @BBL H2.json b/resources/profiles/BBL/filament/Bambu PPA-GF @BBL H2.json index 1f41dc1f9b5..4e834d2f7d7 100644 --- a/resources/profiles/BBL/filament/Bambu PPA-GF @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PPA-GF @BBL H2.json @@ -14,6 +14,99 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2.json b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2.json index 11915b87f95..045e7f5f9d1 100644 --- a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2.json @@ -14,6 +14,99 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "nozzle_temperature": [ + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PVA @BBL H2 0.2 nozzle.json index 544b49d6a9b..58faf33cade 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL H2 0.2 nozzle.json @@ -6,18 +6,102 @@ "setting_id": "GFSS04_21", "instantiation": "true", "filament_max_volumetric_speed": [ + "1", "1" ], "nozzle_temperature": [ + "240", "240" ], "nozzle_temperature_initial_layer": [ + "240", "240" ], "compatible_printers": [ "Bambu Lab H2 0.2 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL H2.json b/resources/profiles/BBL/filament/Bambu PVA @BBL H2.json index 7c68d96c200..db345b00f20 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL H2.json @@ -6,9 +6,11 @@ "setting_id": "GFSS04_20", "instantiation": "true", "nozzle_temperature": [ + "240", "240" ], "nozzle_temperature_initial_layer": [ + "240", "240" ], "compatible_printers": [ @@ -17,6 +19,91 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2.json index 3c5c821d0f1..dd61df91adf 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2.json @@ -14,6 +14,99 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2 0.2 nozzle.json index 6d207f2ea0a..2115ca51800 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2 0.2 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSS02_09", "instantiation": "true", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "additional_cooling_fan_speed": [ "75" ], @@ -16,12 +15,15 @@ "60" ], "filament_max_volumetric_speed": [ + "0.5", "0.5" ], "nozzle_temperature": [ + "240", "240" ], "nozzle_temperature_initial_layer": [ + "240", "240" ], "compatible_printers": [ @@ -31,6 +33,87 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2.json index cea81d40626..f2b38bf74ce 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSS02_08", "instantiation": "true", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "additional_cooling_fan_speed": [ "75" ], @@ -24,6 +23,99 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2 0.2 nozzle.json index 49272f597ed..9aa7d7b8dea 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2 0.2 nozzle.json @@ -12,15 +12,102 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "0.5", "0.5" ], "filament_retraction_distances_when_cut": [ + "18", "18" ], "compatible_printers": [ "Bambu Lab H2 0.2 nozzle" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2.json index e9930ad4b73..526e1eef296 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2.json @@ -12,14 +12,104 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_retraction_distances_when_cut": [ + "18", "18" ], "compatible_printers": [ "Bambu Lab H2 0.4 nozzle", "Bambu Lab H2 0.6 nozzle", "Bambu Lab H2 0.8 nozzle" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL H2.json b/resources/profiles/BBL/filament/Bambu Support G @BBL H2.json index b64b2955fd5..3a7bc389829 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu Support G @BBL H2.json @@ -14,6 +14,99 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL H2 0.2 nozzle.json index 8884cabb2af..8cede5623f4 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL H2 0.2 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSS00_08", "instantiation": "true", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "additional_cooling_fan_speed": [ "75" ], @@ -16,12 +15,15 @@ "60" ], "filament_max_volumetric_speed": [ + "0.5", "0.5" ], "nozzle_temperature": [ + "240", "240" ], "nozzle_temperature_initial_layer": [ + "240", "240" ], "compatible_printers": [ @@ -31,6 +33,87 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL H2.json b/resources/profiles/BBL/filament/Bambu Support W @BBL H2.json index 459fa72f215..07453fcd772 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL H2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSS00_07", "instantiation": "true", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "additional_cooling_fan_speed": [ "75" ], @@ -24,6 +23,99 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2.json index e54a95c45d4..ea554fec53d 100644 --- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2.json @@ -9,14 +9,104 @@ "60" ], "filament_long_retractions_when_cut": [ + "0", "0" ], "filament_retraction_distances_when_cut": [ + "18", "18" ], "compatible_printers": [ "Bambu Lab H2 0.4 nozzle", "Bambu Lab H2 0.6 nozzle", "Bambu Lab H2 0.8 nozzle" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2.json index 8a7aaf280cc..6843c14d3b2 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2.json @@ -6,18 +6,23 @@ "setting_id": "GFSU04_07", "instantiation": "true", "filament_deretraction_speed": [ + "10", "10" ], "filament_max_volumetric_speed": [ + "3", "3" ], "filament_retraction_length": [ + "2", "2" ], "filament_retraction_speed": [ + "10", "10" ], "filament_z_hop_types": [ + "Spiral Lift", "Spiral Lift" ], "compatible_printers": [ @@ -26,6 +31,79 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2.json index 020669ddd41..58d64752564 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2.json @@ -6,18 +6,23 @@ "setting_id": "GFSU03_11", "instantiation": "true", "filament_deretraction_speed": [ + "10", "10" ], "filament_max_volumetric_speed": [ + "4", "4" ], "filament_retraction_length": [ + "2", "2" ], "filament_retraction_speed": [ + "10", "10" ], "filament_z_hop_types": [ + "Spiral Lift", "Spiral Lift" ], "slow_down_layer_time": [ @@ -29,6 +34,79 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2.json index c496237dcb9..9b624443047 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2.json @@ -5,8 +5,8 @@ "from": "system", "setting_id": "GFSU01_04", "instantiation": "true", - "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "filament_max_volumetric_speed": [ + "3.6", "3.6" ], "compatible_printers": [ @@ -18,6 +18,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2.json index 37f240f33fd..17bbc38617b 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2.json @@ -5,14 +5,16 @@ "from": "system", "setting_id": "GFSU00_09", "instantiation": "true", - "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "filament_deretraction_speed": [ + "nil", "nil" ], "filament_retraction_length": [ + "0.8", "0.8" ], "filament_retraction_speed": [ + "nil", "nil" ], "compatible_printers": [ @@ -24,6 +26,87 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2.json index d095ddf2509..3d4713b94f1 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2.json @@ -12,15 +12,19 @@ "60" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "12", "12" ], "filament_retraction_length": [ + "0.4", "0.4" ], "filament_retraction_speed": [ + "nil", "nil" ], "slow_down_layer_time": [ @@ -32,6 +36,83 @@ "Bambu Lab H2 0.8 nozzle" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.97", + "0.97" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @BBL H2 0.2 nozzle.json index 4fb92356e84..0da12b18eca 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL H2 0.2 nozzle.json @@ -5,8 +5,8 @@ "from": "system", "setting_id": "GFSC99_12", "instantiation": "true", - "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "filament_max_volumetric_speed": [ + "1", "1" ], "compatible_printers": [ @@ -16,6 +16,95 @@ "; filament start gcode\nM145 P1" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL H2.json b/resources/profiles/BBL/filament/Generic PC @BBL H2.json index 9ec4e792d41..ca83543f4f2 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL H2.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL H2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSC99_11", "instantiation": "true", - "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "60" ], @@ -18,6 +17,99 @@ "; filament start gcode\nM145 P1" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @BBL H2 0.2 nozzle.json index 11c9dc46fbb..6d2f77bd680 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL H2 0.2 nozzle.json @@ -6,6 +6,7 @@ "setting_id": "GFSG99_08", "instantiation": "true", "filament_max_volumetric_speed": [ + "1", "1" ], "compatible_printers": [ @@ -15,6 +16,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL H2.json b/resources/profiles/BBL/filament/Generic PETG @BBL H2.json index 1891460c76a..a165a023f15 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL H2.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL H2.json @@ -17,6 +17,99 @@ "; filament end gcode \n" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2.json b/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2.json index 48e2e91dec2..82e08e74b09 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2.json @@ -15,6 +15,7 @@ "5" ], "filament_max_volumetric_speed": [ + "11.5", "11.5" ], "overhang_fan_speed": [ @@ -29,6 +30,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @BBL H2 0.2 nozzle.json index 1953f745d0e..deb676262db 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL H2 0.2 nozzle.json @@ -5,11 +5,11 @@ "from": "system", "setting_id": "GFSL99_09", "instantiation": "true", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", "additional_cooling_fan_speed": [ "75" ], "filament_max_volumetric_speed": [ + "1.6", "1.6" ], "compatible_printers": [ @@ -19,6 +19,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL H2.json b/resources/profiles/BBL/filament/Generic PLA @BBL H2.json index f4e6905242b..180e9e264d9 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL H2.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL H2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSL99_08", "instantiation": "true", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", "additional_cooling_fan_speed": [ "75" ], @@ -18,6 +17,99 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2 0.2 nozzle.json index 25833430c8f..7e6272d5ba6 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2 0.2 nozzle.json @@ -9,6 +9,7 @@ "75" ], "filament_max_volumetric_speed": [ + "2", "2" ], "slow_down_layer_time": [ @@ -21,6 +22,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2.json index 5f2e670f055..ebc6466f4b4 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2.json @@ -20,6 +20,99 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2.json b/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2.json index c037d8c6e94..0da3016b652 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2.json @@ -5,14 +5,15 @@ "from": "system", "setting_id": "GFSL96_04", "instantiation": "true", - "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "additional_cooling_fan_speed": [ "75" ], "filament_max_volumetric_speed": [ + "7.5", "7.5" ], "filament_retraction_length": [ + "0.5", "0.5" ], "compatible_printers": [ @@ -24,6 +25,91 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2.json b/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2.json index 1114ab35a41..9c5f794b961 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2.json @@ -14,6 +14,99 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU @BBL H2.json b/resources/profiles/BBL/filament/Generic TPU @BBL H2.json index 20ac2d56e24..6c71d1e0632 100644 --- a/resources/profiles/BBL/filament/Generic TPU @BBL H2.json +++ b/resources/profiles/BBL/filament/Generic TPU @BBL H2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSU99_04", "instantiation": "true", - "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "compatible_printers": [ "Bambu Lab H2 0.4 nozzle", "Bambu Lab H2 0.6 nozzle", @@ -15,6 +14,99 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "3.2", + "3.2" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2.json index b268cae79c8..6f717dfbdf4 100644 --- a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2.json +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSU98_06", "instantiation": "true", - "description": "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide.", "fan_cooling_layer_time": [ "40" ], @@ -30,6 +29,99 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5" + ], + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2 0.2 nozzle.json index b62c5c69503..718c631be0a 100644 --- a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2 0.2 nozzle.json @@ -9,6 +9,7 @@ "75" ], "filament_max_volumetric_speed": [ + "1.8", "1.8" ], "compatible_printers": [ @@ -18,6 +19,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2.json index c4ffcba2eb9..41e10c8e11d 100644 --- a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2.json +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2.json @@ -17,6 +17,99 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture PLA @BBL H2 0.2 nozzle.json index 13bb915412b..6acabc8c162 100644 --- a/resources/profiles/BBL/filament/Overture PLA @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Overture PLA @BBL H2 0.2 nozzle.json @@ -9,6 +9,7 @@ "75" ], "filament_max_volumetric_speed": [ + "1.6", "1.6" ], "compatible_printers": [ @@ -18,6 +19,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL H2.json b/resources/profiles/BBL/filament/Overture PLA @BBL H2.json index d884d0609a6..1d453e11af3 100644 --- a/resources/profiles/BBL/filament/Overture PLA @BBL H2.json +++ b/resources/profiles/BBL/filament/Overture PLA @BBL H2.json @@ -17,6 +17,99 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL H2 0.2 nozzle.json index 4a78ac5b8ff..66d2f26506c 100644 --- a/resources/profiles/BBL/filament/PolyLite PETG @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL H2 0.2 nozzle.json @@ -6,6 +6,7 @@ "setting_id": "GFSG60_11", "instantiation": "true", "filament_max_volumetric_speed": [ + "1", "1" ], "nozzle_temperature_range_high": [ @@ -18,6 +19,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL H2.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL H2.json index e2650d6aa51..23437423a75 100644 --- a/resources/profiles/BBL/filament/PolyLite PETG @BBL H2.json +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL H2.json @@ -6,6 +6,7 @@ "setting_id": "GFSG60_10", "instantiation": "true", "filament_max_volumetric_speed": [ + "11.5", "11.5" ], "nozzle_temperature_range_high": [ @@ -20,6 +21,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL H2 0.2 nozzle.json index 8bff2561133..0782c095342 100644 --- a/resources/profiles/BBL/filament/PolyLite PLA @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL H2 0.2 nozzle.json @@ -9,6 +9,7 @@ "75" ], "filament_max_volumetric_speed": [ + "1.6", "1.6" ], "compatible_printers": [ @@ -18,6 +19,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL H2.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL H2.json index 3883813f6c4..b920a82a894 100644 --- a/resources/profiles/BBL/filament/PolyLite PLA @BBL H2.json +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL H2.json @@ -9,6 +9,7 @@ "75" ], "filament_max_volumetric_speed": [ + "15", "15" ], "compatible_printers": [ @@ -20,6 +21,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2 0.2 nozzle.json index 0a0b3c90279..b6e211cbc14 100644 --- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2 0.2 nozzle.json @@ -9,6 +9,7 @@ "75" ], "filament_max_volumetric_speed": [ + "1.8", "1.8" ], "compatible_printers": [ @@ -18,6 +19,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2.json index 8d26c649600..b7675f74697 100644 --- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2.json +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2.json @@ -9,6 +9,7 @@ "75" ], "filament_max_volumetric_speed": [ + "22", "22" ], "compatible_printers": [ @@ -20,6 +21,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2 0.2 nozzle.json index 81c402646ea..e403ebbb2da 100644 --- a/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2 0.2 nozzle.json @@ -9,6 +9,7 @@ "75" ], "filament_max_volumetric_speed": [ + "1.8", "1.8" ], "compatible_printers": [ @@ -18,6 +19,95 @@ "; filament start gcode\nM145 P0\nM142 P1 R35 S40 U0.3 V0.5" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2.json index 50e56ce453a..1650a4ce2f6 100644 --- a/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2.json +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2.json @@ -20,6 +20,99 @@ "; filament end gcode \n" ], "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", "0" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2 0.2 nozzle.json index 2e6e2067ffb..44869149a75 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2 0.2 nozzle.json @@ -21,6 +21,179 @@ "0.04" ], "retraction_length": [ + "0.4", "0.4" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500" + ], + "machine_max_speed_x": [ + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_y": [ + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_z": [ + "30", + "30", + "30", + "30" + ], + "nozzle_volume": [ + "32", + "32" + ], + "retract_lift_below": [ + "339", + "339" + ], + "deretraction_speed": [ + "30", + "30" + ], + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3" + ], + "machine_max_speed_e": [ + "30", + "30", + "30", + "30" + ], + "machine_min_extruding_rate": [ + "0" + ], + "machine_min_travel_rate": [ + "0" + ], + "nozzle_type": [ + "hardened_steel", + "hardened_steel" + ], + "printer_extruder_id": [ + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "retract_before_wipe": [ + "0%", + "0%" + ], + "retract_length_toolchange": [ + "2", + "2" + ], + "retract_lift_above": [ + "0", + "0" + ], + "retraction_minimum_travel": [ + "1", + "1" + ], + "retraction_speed": [ + "30", + "30" + ], + "wipe_distance": [ + "2", + "2" + ], + "z_hop": [ + "0.4", + "0.4" + ], + "long_retractions_when_cut": [ + "0", + "0" + ], + "retract_restart_extra": [ + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18" + ], + "wipe": [ + "1", + "1" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2 0.4 nozzle.json index f92e769d44c..c68e9aa4b2f 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2 0.4 nozzle.json @@ -23,23 +23,32 @@ "extruder_clearance_radius": "30", "fan_direction": "left", "machine_max_acceleration_z": [ + "500", + "500", "500", "500" ], "machine_max_speed_x": [ + "1000", + "1000", "1000", "1000" ], "machine_max_speed_y": [ + "1000", + "1000", "1000", "1000" ], "machine_max_speed_z": [ + "30", + "30", "30", "30" ], "machine_unload_filament_time": "28", "nozzle_volume": [ + "32", "32" ], "printable_area": [ @@ -50,6 +59,7 @@ ], "printable_height": "340", "retract_lift_below": [ + "339", "339" ], "support_chamber_temp_control": "1", @@ -57,5 +67,152 @@ "machine_end_gcode": ";===== date: 2025/02/05 =====================\n;===== O1S =====================\nG392 S0 ;turn off nozzle clog detect\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n{if timelapse_type == 2}\nM991 S0 P-1 ;end timelapse immediately\n{endif}\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\n\nG90\nG150.3\n\n{if timelapse_type == 1}\nM991 S0 P-1 ;end timelapse at safe pos\n{endif}\n\nM141 S0 ; turn off chamber heating\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n; pull back filament to AMS\nM620 S65535\nT65535\nG150.2\nM621 S65535\n\nG150.3\n\nM104 S0; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 320}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z320 F600\n G1 Z320\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM1015.4 S0 K0 ;disable air printing detect\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A48 B10 L99 C48 D10 M99 E48 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A60 B10 L99 C60 D10 M99 E60 F10 N99 \nM1006 W\n;=====printer finish sound=========\nM400\nM18\n", "layer_change_gcode": ";======== H2D 20250205========\n; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n", "time_lapse_gcode": ";======== H2D 20250117========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firware, default turned on\n\nM1002 judge_flag timelapse_record_flag\nM622 J1\n\nM9712 E{most_used_physical_extruder_id} M{timelapse_type}\nM83\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Z{max_layer_z + 0.4} F1200\nM400\nM9713\n\nM9711 M{timelapse_type} E{most_used_physical_extruder_id} Z{layer_z} S11 C10 O0 T3000\n\nM9712 E{most_used_physical_extruder_id} M{timelapse_type}\nG90\n;G1 Z{max_layer_z + 3.0} F1200\nG1 Y295 F30000\nG1 Y265 F18000\nM83\nG1 E[retraction_length] F300\nM9713\n\nM623\n; SKIPPABLE_END\n", - "change_filament_gcode": ";===== machine: O1S T0 =========================\n;===== date: 2025/05/13 =====================\n\nM993 A2 B2 C2 ; nozzle cam detection allow status save.\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n{if (filament_type[next_extruder] == \"PLA\") || (filament_type[next_extruder] == \"PETG\")\n || (filament_type[next_extruder] == \"PLA-CF\") || (filament_type[next_extruder] == \"PETG-CF\")}\nM1015.4 S1 K0 ;disable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620 S[next_extruder]A\nM1002 gcode_claim_action : 4\nM204 S9000\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\nM620.10 A0 F{filament_max_volumetric_speed[current_extruder]/2.4053*60} L[flush_length] H{nozzle_diameter[current_extruder]} T{nozzle_temperature_range_high[current_extruder]} P{nozzle_temperature[current_extruder]} S1\nM620.10 A1 F{filament_max_volumetric_speed[next_extruder]/2.4053*60} L[flush_length] H{nozzle_diameter[next_extruder]} T{nozzle_temperature_range_high[next_extruder]} P{nozzle_temperature[next_extruder]} S1\n\n{if long_retraction_when_cut}\nM620.11 P1 I[current_extruder] E-{retraction_distance_when_cut} F{max((filament_max_volumetric_speed[current_extruder]/2.4053*60), 200)}\n{else}\nM620.11 P0 I[current_extruder] E0\n{endif}\n\n\n{if filament_type[current_extruder] == \"TPU\" || filament_type[next_extruder] == \"TPU\"}\nM620.11 H2 C331\n{else}\nM620.11 H0\n{endif}\n\nT[next_extruder]\n\n\n; VFLUSH_START\n\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\n\nSYNC T{ceil(flush_length / 125) * 5}\n\n; VFLUSH_END\n\nM1002 set_filament_type:{filament_type[next_extruder]}\n\nM400\nM83\n{if next_extruder < 255}\n\nM628 S0\n;VM109 S[new_filament_temp]\n\nM629\nM400\n\nM983.3 F{filament_max_volumetric_speed[next_extruder]/2.4} A0.4\n\nM400\n{if wipe_avoid_perimeter}\nG1 Y320 F30000\nG1 X{wipe_avoid_pos_x} F30000\n{endif}\nG1 Y295 F30000\nG1 Y265 F18000\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n\nM993 A3 B3 C3 ; nozzle cam detection allow status restore.\n\n{if (filament_type[next_extruder] == \"PLA\") || (filament_type[next_extruder] == \"PETG\")\n || (filament_type[next_extruder] == \"PLA-CF\") || (filament_type[next_extruder] == \"PETG-CF\")}\nM1015.4 S1 K1 H[nozzle_diameter] ;enable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620.6 I[next_extruder] W1 ;enable ams air printing detect\nM1002 gcode_claim_action : 0\n" + "change_filament_gcode": ";===== machine: O1S T0 =========================\n;===== date: 2025/05/13 =====================\n\nM993 A2 B2 C2 ; nozzle cam detection allow status save.\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n{if (filament_type[next_extruder] == \"PLA\") || (filament_type[next_extruder] == \"PETG\")\n || (filament_type[next_extruder] == \"PLA-CF\") || (filament_type[next_extruder] == \"PETG-CF\")}\nM1015.4 S1 K0 ;disable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620 S[next_extruder]A\nM1002 gcode_claim_action : 4\nM204 S9000\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\nM620.10 A0 F{filament_max_volumetric_speed[current_extruder]/2.4053*60} L[flush_length] H{nozzle_diameter[current_extruder]} T{nozzle_temperature_range_high[current_extruder]} P{nozzle_temperature[current_extruder]} S1\nM620.10 A1 F{filament_max_volumetric_speed[next_extruder]/2.4053*60} L[flush_length] H{nozzle_diameter[next_extruder]} T{nozzle_temperature_range_high[next_extruder]} P{nozzle_temperature[next_extruder]} S1\n\n{if long_retraction_when_cut}\nM620.11 P1 I[current_extruder] E-{retraction_distance_when_cut} F{max((filament_max_volumetric_speed[current_extruder]/2.4053*60), 200)}\n{else}\nM620.11 P0 I[current_extruder] E0\n{endif}\n\n\n{if filament_type[current_extruder] == \"TPU\" || filament_type[next_extruder] == \"TPU\"}\nM620.11 H2 C331\n{else}\nM620.11 H0\n{endif}\n\nT[next_extruder]\n\n\n; VFLUSH_START\n\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\n\nSYNC T{ceil(flush_length / 125) * 5}\n\n; VFLUSH_END\n\nM1002 set_filament_type:{filament_type[next_extruder]}\n\nM400\nM83\n{if next_extruder < 255}\n\nM628 S0\n;VM109 S[new_filament_temp]\n\nM629\nM400\n\nM983.3 F{filament_max_volumetric_speed[next_extruder]/2.4} A0.4\n\nM400\n{if wipe_avoid_perimeter}\nG1 Y320 F30000\nG1 X{wipe_avoid_pos_x} F30000\n{endif}\nG1 Y295 F30000\nG1 Y265 F18000\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n\nM993 A3 B3 C3 ; nozzle cam detection allow status restore.\n\n{if (filament_type[next_extruder] == \"PLA\") || (filament_type[next_extruder] == \"PETG\")\n || (filament_type[next_extruder] == \"PLA-CF\") || (filament_type[next_extruder] == \"PETG-CF\")}\nM1015.4 S1 K1 H[nozzle_diameter] ;enable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620.6 I[next_extruder] W1 ;enable ams air printing detect\nM1002 gcode_claim_action : 0\n", + "deretraction_speed": [ + "30", + "30" + ], + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3" + ], + "machine_max_speed_e": [ + "30", + "30", + "30", + "30" + ], + "machine_min_extruding_rate": [ + "0" + ], + "machine_min_travel_rate": [ + "0" + ], + "nozzle_type": [ + "hardened_steel", + "hardened_steel" + ], + "printer_extruder_id": [ + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow" + ], + "retract_before_wipe": [ + "0%", + "0%" + ], + "retract_length_toolchange": [ + "2", + "2" + ], + "retract_lift_above": [ + "0", + "0" + ], + "retraction_length": [ + "0.8", + "0.8" + ], + "retraction_minimum_travel": [ + "1", + "1" + ], + "retraction_speed": [ + "30", + "30" + ], + "wipe_distance": [ + "2", + "2" + ], + "z_hop": [ + "0.4", + "0.4" + ], + "long_retractions_when_cut": [ + "0", + "0" + ], + "retract_restart_extra": [ + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18" + ], + "wipe": [ + "1", + "1" + ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2 0.6 nozzle.json index eecb59b7fed..6581f679da2 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2 0.6 nozzle.json @@ -10,9 +10,6 @@ ], "printer_model": "Bambu Lab H2", "printer_variant": "0.6", - "default_filament_profile": [ - "Bambu PLA Basic @BBL H2" - ], "default_print_profile": "0.30mm Standard @BBL H2 0.6 nozzle", "max_layer_height": [ "0.42" @@ -21,6 +18,7 @@ "0.12" ], "retraction_length": [ + "1.4", "1.4" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2 0.8 nozzle.json index 043d762b8f1..ab3f8fda7ca 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2 0.8 nozzle.json @@ -10,9 +10,6 @@ ], "printer_model": "Bambu Lab H2", "printer_variant": "0.8", - "default_filament_profile": [ - "Bambu PLA Basic @BBL H2" - ], "default_print_profile": "0.40mm Standard @BBL H2 0.8 nozzle", "max_layer_height": [ "0.56" @@ -21,6 +18,7 @@ "0.16" ], "retraction_length": [ + "3", "3" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2 0.2 nozzle.json new file mode 100644 index 00000000000..5d2cbf7c941 --- /dev/null +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2 0.2 nozzle.json @@ -0,0 +1,173 @@ +{ + "type": "process", + "name": "0.08mm Extra Fine @BBL H2 0.2 nozzle", + "inherits": "fdm_process_single_0.08_nozzle_0.2", + "from": "system", + "setting_id": "GP231", + "instantiation": "true", + "description": "High quality profile for 0.2mm nozzle, prioritizing print quality.", + "default_acceleration": [ + "8000", + "8000" + ], + "initial_layer_speed": [ + "40", + "40" + ], + "overhang_1_4_speed": [ + "60", + "60" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "travel_speed": [ + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2 0.2 nozzle" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_infill_speed": [ + "70", + "70" + ], + "sparse_infill_speed": [ + "100", + "100" + ], + "top_surface_speed": [ + "150", + "150" + ], + "bridge_speed": [ + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "enable_overhang_speed": [ + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0" + ], + "slowdown_start_height": [ + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000" + ], + "gap_infill_speed": [ + "50", + "50" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "inner_wall_speed": [ + "150", + "150" + ], + "internal_solid_infill_speed": [ + "150", + "150" + ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], + "outer_wall_speed": [ + "120", + "120" + ], + "overhang_2_4_speed": [ + "50", + "50" + ], + "overhang_3_4_speed": [ + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], + "overhang_totally_speed": [ + "10", + "10" + ], + "print_extruder_id": [ + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "small_perimeter_speed": [ + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0" + ], + "smooth_coefficient": "4", + "sparse_infill_acceleration": [ + "100%", + "100%" + ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000" + ], + "travel_speed_z": [ + "0", + "0" + ], + "vertical_shell_speed": [ + "80%", + "80%" + ], + "prime_tower_flat_ironing": "1" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2.json new file mode 100644 index 00000000000..87031c9f11f --- /dev/null +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2.json @@ -0,0 +1,173 @@ +{ + "type": "process", + "name": "0.08mm Extra Fine @BBL H2", + "inherits": "fdm_process_single_0.08", + "from": "system", + "setting_id": "GP232", + "instantiation": "true", + "default_acceleration": [ + "4000", + "4000" + ], + "gap_infill_speed": [ + "50", + "50" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "initial_layer_speed": [ + "40", + "40" + ], + "inner_wall_speed": [ + "120", + "120" + ], + "internal_solid_infill_speed": [ + "120", + "120" + ], + "outer_wall_acceleration": [ + "2000", + "2000" + ], + "outer_wall_speed": [ + "60", + "60" + ], + "overhang_1_4_speed": [ + "60", + "60" + ], + "overhang_2_4_speed": [ + "30", + "30" + ], + "overhang_3_4_speed": [ + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "100", + "100" + ], + "top_surface_speed": [ + "120", + "120" + ], + "compatible_printers": [ + "Bambu Lab H2 0.4 nozzle" + ], + "top_shell_thickness": "1.0", + "bridge_speed": [ + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "enable_overhang_speed": [ + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0" + ], + "slowdown_start_height": [ + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], + "overhang_totally_speed": [ + "10", + "10" + ], + "print_extruder_id": [ + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "small_perimeter_speed": [ + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0" + ], + "smooth_coefficient": "4", + "sparse_infill_acceleration": [ + "100%", + "100%" + ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000" + ], + "travel_speed": [ + "500", + "500" + ], + "travel_speed_z": [ + "0", + "0" + ], + "vertical_shell_speed": [ + "80%", + "80%" + ], + "prime_tower_flat_ironing": "1" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL H2 0.2 nozzle.json index ea2fcd42c1b..4917a6f32cf 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL H2 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL H2 0.2 nozzle.json @@ -10,9 +10,134 @@ "prime_tower_flat_ironing": "1", "prime_tower_width": "60", "travel_speed": [ + "1000", "1000" ], "compatible_printers": [ "Bambu Lab H2 0.2 nozzle" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "initial_layer_speed": [ + "40", + "40" + ], + "sparse_infill_speed": [ + "100", + "100" + ], + "top_surface_speed": [ + "150", + "150" + ], + "bridge_speed": [ + "50", + "50" + ], + "enable_overhang_speed": [ + "1", + "1" + ], + "gap_infill_speed": [ + "50", + "50" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "inner_wall_speed": [ + "150", + "150" + ], + "internal_solid_infill_speed": [ + "150", + "150" + ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], + "overhang_1_4_speed": [ + "0", + "0" + ], + "overhang_2_4_speed": [ + "50", + "50" + ], + "overhang_3_4_speed": [ + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], + "print_extruder_id": [ + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "small_perimeter_speed": [ + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0" + ], + "sparse_infill_acceleration": [ + "100%", + "100%" + ], + "support_speed": [ + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000" + ], + "travel_speed_z": [ + "0", + "0" + ], + "vertical_shell_speed": [ + "80%", + "80%" + ], + "default_acceleration": [ + "10000", + "10000" + ], + "outer_wall_speed": [ + "120", + "120" + ], + "overhang_totally_speed": [ + "10", + "10" + ], + "support_interface_speed": [ + "80", + "80" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "travel_acceleration": [ + "10000", + "10000" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2 0.2 nozzle.json new file mode 100644 index 00000000000..a402931df71 --- /dev/null +++ b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2 0.2 nozzle.json @@ -0,0 +1,172 @@ +{ + "type": "process", + "name": "0.12mm Balanced Quality @BBL H2 0.2 nozzle", + "inherits": "fdm_process_single_0.12_nozzle_0.2", + "from": "system", + "setting_id": "GP233", + "instantiation": "true", + "default_acceleration": [ + "8000", + "8000" + ], + "initial_layer_speed": [ + "40", + "40" + ], + "overhang_1_4_speed": [ + "60", + "60" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "travel_speed": [ + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2 0.2 nozzle" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_infill_speed": [ + "70", + "70" + ], + "sparse_infill_speed": [ + "100", + "100" + ], + "top_surface_speed": [ + "150", + "150" + ], + "bridge_speed": [ + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "enable_overhang_speed": [ + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0" + ], + "slowdown_start_height": [ + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000" + ], + "gap_infill_speed": [ + "50", + "50" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "inner_wall_speed": [ + "150", + "150" + ], + "internal_solid_infill_speed": [ + "150", + "150" + ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], + "outer_wall_speed": [ + "120", + "120" + ], + "overhang_2_4_speed": [ + "50", + "50" + ], + "overhang_3_4_speed": [ + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], + "overhang_totally_speed": [ + "10", + "10" + ], + "print_extruder_id": [ + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "small_perimeter_speed": [ + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0" + ], + "smooth_coefficient": "4", + "sparse_infill_acceleration": [ + "100%", + "100%" + ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000" + ], + "travel_speed_z": [ + "0", + "0" + ], + "vertical_shell_speed": [ + "80%", + "80%" + ], + "prime_tower_flat_ironing": "1" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL H2.json b/resources/profiles/BBL/process/0.12mm Fine @BBL H2.json new file mode 100644 index 00000000000..545621546be --- /dev/null +++ b/resources/profiles/BBL/process/0.12mm Fine @BBL H2.json @@ -0,0 +1,177 @@ +{ + "type": "process", + "name": "0.12mm Fine @BBL H2", + "inherits": "fdm_process_single_0.12", + "from": "system", + "setting_id": "GP234", + "instantiation": "true", + "bottom_shell_layers": "7", + "default_acceleration": [ + "4000", + "4000" + ], + "gap_infill_speed": [ + "50", + "50" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "initial_layer_speed": [ + "40", + "40" + ], + "inner_wall_speed": [ + "120", + "120" + ], + "internal_solid_infill_speed": [ + "150", + "150" + ], + "outer_wall_acceleration": [ + "2000", + "2000" + ], + "outer_wall_speed": [ + "60", + "60" + ], + "overhang_1_4_speed": [ + "60", + "60" + ], + "overhang_2_4_speed": [ + "30", + "30" + ], + "overhang_3_4_speed": [ + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "100", + "100" + ], + "top_color_penetration_layers": "7", + "top_shell_layers": "9", + "top_shell_thickness": "0.8", + "top_surface_speed": [ + "150", + "150" + ], + "wall_loops": "4", + "compatible_printers": [ + "Bambu Lab H2 0.4 nozzle" + ], + "bridge_speed": [ + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "enable_overhang_speed": [ + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0" + ], + "slowdown_start_height": [ + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], + "overhang_totally_speed": [ + "10", + "10" + ], + "print_extruder_id": [ + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "small_perimeter_speed": [ + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0" + ], + "smooth_coefficient": "4", + "sparse_infill_acceleration": [ + "100%", + "100%" + ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000" + ], + "travel_speed": [ + "500", + "500" + ], + "travel_speed_z": [ + "0", + "0" + ], + "vertical_shell_speed": [ + "80%", + "80%" + ], + "prime_tower_flat_ironing": "1" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.16mm Balanced Quality @BBL H2.json b/resources/profiles/BBL/process/0.16mm Balanced Quality @BBL H2.json new file mode 100644 index 00000000000..c64638d5149 --- /dev/null +++ b/resources/profiles/BBL/process/0.16mm Balanced Quality @BBL H2.json @@ -0,0 +1,173 @@ +{ + "type": "process", + "name": "0.16mm Balanced Quality @BBL H2", + "inherits": "fdm_process_single_0.16", + "from": "system", + "setting_id": "GP235", + "instantiation": "true", + "description": "High quality profile for 0.16mm layer height, prioritizing print quality and strength.", + "default_acceleration": [ + "4000", + "4000" + ], + "initial_layer_speed": [ + "50", + "50" + ], + "inner_wall_speed": [ + "150", + "150" + ], + "internal_solid_infill_speed": [ + "180", + "180" + ], + "outer_wall_acceleration": [ + "2000", + "2000" + ], + "outer_wall_speed": [ + "60", + "60" + ], + "overhang_1_4_speed": [ + "60", + "60" + ], + "overhang_2_4_speed": [ + "30", + "30" + ], + "overhang_3_4_speed": [ + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "180", + "180" + ], + "top_surface_speed": [ + "150", + "150" + ], + "compatible_printers": [ + "Bambu Lab H2 0.4 nozzle" + ], + "gap_infill_speed": [ + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105" + ], + "bridge_speed": [ + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "enable_overhang_speed": [ + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0" + ], + "slowdown_start_height": [ + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], + "overhang_totally_speed": [ + "10", + "10" + ], + "print_extruder_id": [ + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "small_perimeter_speed": [ + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0" + ], + "smooth_coefficient": "4", + "sparse_infill_acceleration": [ + "100%", + "100%" + ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000" + ], + "travel_speed": [ + "500", + "500" + ], + "travel_speed_z": [ + "0", + "0" + ], + "vertical_shell_speed": [ + "80%", + "80%" + ], + "prime_tower_flat_ironing": "1" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.16mm Standard @BBL H2.json b/resources/profiles/BBL/process/0.16mm Standard @BBL H2.json new file mode 100644 index 00000000000..aaa812ebd00 --- /dev/null +++ b/resources/profiles/BBL/process/0.16mm Standard @BBL H2.json @@ -0,0 +1,172 @@ +{ + "type": "process", + "name": "0.16mm Standard @BBL H2", + "inherits": "fdm_process_single_0.16", + "from": "system", + "setting_id": "GP236", + "instantiation": "true", + "description": "Standard profile for 0.16mm layer height, prioritizing speed.", + "default_acceleration": [ + "8000", + "8000" + ], + "initial_layer_speed": [ + "50", + "50" + ], + "internal_solid_infill_speed": [ + "250", + "300" + ], + "outer_wall_speed": [ + "200", + "200" + ], + "overhang_1_4_speed": [ + "60", + "60" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600" + ], + "travel_speed": [ + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2 0.4 nozzle" + ], + "gap_infill_speed": [ + "250", + "250" + ], + "inner_wall_speed": [ + "300", + "300" + ], + "initial_layer_infill_speed": [ + "105", + "105" + ], + "bridge_speed": [ + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "enable_overhang_speed": [ + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0" + ], + "slowdown_start_height": [ + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], + "overhang_2_4_speed": [ + "50", + "50" + ], + "overhang_3_4_speed": [ + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], + "overhang_totally_speed": [ + "10", + "10" + ], + "print_extruder_id": [ + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "small_perimeter_speed": [ + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0" + ], + "smooth_coefficient": "4", + "sparse_infill_acceleration": [ + "100%", + "100%" + ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000" + ], + "top_surface_speed": [ + "200", + "200" + ], + "travel_speed_z": [ + "0", + "0" + ], + "vertical_shell_speed": [ + "80%", + "80%" + ], + "prime_tower_flat_ironing": "1" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2 0.6 nozzle.json new file mode 100644 index 00000000000..b21d394ff7b --- /dev/null +++ b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2 0.6 nozzle.json @@ -0,0 +1,173 @@ +{ + "type": "process", + "name": "0.18mm Balanced Quality @BBL H2 0.6 nozzle", + "inherits": "fdm_process_single_0.18_nozzle_0.6", + "from": "system", + "setting_id": "GP237", + "instantiation": "true", + "description": "High quality profile for 0.6mm nozzle, prioritizing print quality and strength.", + "bridge_speed": [ + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000" + ], + "gap_infill_speed": [ + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300" + ], + "outer_wall_speed": [ + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2 0.6 nozzle" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "enable_overhang_speed": [ + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0" + ], + "slowdown_start_height": [ + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], + "overhang_1_4_speed": [ + "0", + "0" + ], + "overhang_2_4_speed": [ + "50", + "50" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], + "overhang_totally_speed": [ + "10", + "10" + ], + "print_extruder_id": [ + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "small_perimeter_speed": [ + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0" + ], + "smooth_coefficient": "4", + "sparse_infill_acceleration": [ + "100%", + "100%" + ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000" + ], + "travel_speed_z": [ + "0", + "0" + ], + "vertical_shell_speed": [ + "80%", + "80%" + ], + "prime_tower_flat_ironing": "1" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.20mm Balanced Strength @BBL H2.json b/resources/profiles/BBL/process/0.20mm Balanced Strength @BBL H2.json new file mode 100644 index 00000000000..40000a2a899 --- /dev/null +++ b/resources/profiles/BBL/process/0.20mm Balanced Strength @BBL H2.json @@ -0,0 +1,174 @@ +{ + "type": "process", + "name": "0.20mm Balanced Strength @BBL H2", + "inherits": "fdm_process_single_0.20", + "from": "system", + "setting_id": "GP238", + "instantiation": "true", + "description": "High quality profile for 0.2mm layer height, prioritizing strength and print quality.", + "bottom_shell_layers": "4", + "default_acceleration": [ + "4000", + "4000" + ], + "initial_layer_speed": [ + "50", + "50" + ], + "inner_wall_speed": [ + "150", + "150" + ], + "internal_solid_infill_speed": [ + "200", + "200" + ], + "outer_wall_acceleration": [ + "2000", + "2000" + ], + "outer_wall_speed": [ + "60", + "60" + ], + "overhang_2_4_speed": [ + "30", + "30" + ], + "overhang_3_4_speed": [ + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "200", + "200" + ], + "top_shell_layers": "6", + "top_surface_speed": [ + "150", + "150" + ], + "compatible_printers": [ + "Bambu Lab H2 0.4 nozzle" + ], + "gap_infill_speed": [ + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105" + ], + "bridge_speed": [ + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "enable_overhang_speed": [ + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0" + ], + "slowdown_start_height": [ + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "overhang_1_4_speed": [ + "0", + "0" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], + "overhang_totally_speed": [ + "10", + "10" + ], + "print_extruder_id": [ + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "small_perimeter_speed": [ + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0" + ], + "smooth_coefficient": "4", + "sparse_infill_acceleration": [ + "100%", + "100%" + ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000" + ], + "travel_speed": [ + "500", + "500" + ], + "travel_speed_z": [ + "0", + "0" + ], + "vertical_shell_speed": [ + "80%", + "80%" + ], + "prime_tower_flat_ironing": "1" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL H2.json b/resources/profiles/BBL/process/0.20mm Standard @BBL H2.json index fd76153d166..176326edd7f 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL H2.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL H2.json @@ -10,9 +10,134 @@ "prime_tower_width": "60", "smooth_coefficient": "4", "travel_speed": [ + "1000", "1000" ], "compatible_printers": [ "Bambu Lab H2 0.4 nozzle" + ], + "gap_infill_speed": [ + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "250" + ], + "outer_wall_speed": [ + "200", + "200" + ], + "sparse_infill_speed": [ + "270", + "270" + ], + "bridge_speed": [ + "50", + "50" + ], + "enable_overhang_speed": [ + "1", + "1" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], + "overhang_1_4_speed": [ + "0", + "0" + ], + "overhang_2_4_speed": [ + "50", + "50" + ], + "overhang_3_4_speed": [ + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], + "print_extruder_id": [ + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "small_perimeter_speed": [ + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0" + ], + "sparse_infill_acceleration": [ + "100%", + "100%" + ], + "support_speed": [ + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000" + ], + "top_surface_speed": [ + "200", + "200" + ], + "travel_speed_z": [ + "0", + "0" + ], + "vertical_shell_speed": [ + "80%", + "80%" + ], + "default_acceleration": [ + "10000", + "10000" + ], + "overhang_totally_speed": [ + "10", + "10" + ], + "support_interface_speed": [ + "80", + "80" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "travel_acceleration": [ + "10000", + "10000" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2 0.8 nozzle.json new file mode 100644 index 00000000000..a9099ba43a9 --- /dev/null +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2 0.8 nozzle.json @@ -0,0 +1,173 @@ +{ + "type": "process", + "name": "0.24mm Balanced Quality @BBL H2 0.8 nozzle", + "inherits": "fdm_process_single_0.24_nozzle_0.8", + "from": "system", + "setting_id": "GP239", + "instantiation": "true", + "description": "High quality profile for 0.8mm nozzle, prioritizing print quality.", + "bridge_speed": [ + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000" + ], + "gap_infill_speed": [ + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300" + ], + "outer_wall_speed": [ + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2 0.8 nozzle" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "enable_overhang_speed": [ + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0" + ], + "slowdown_start_height": [ + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], + "overhang_1_4_speed": [ + "0", + "0" + ], + "overhang_2_4_speed": [ + "50", + "50" + ], + "overhang_totally_speed": [ + "10", + "10" + ], + "print_extruder_id": [ + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "small_perimeter_speed": [ + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0" + ], + "smooth_coefficient": "4", + "sparse_infill_acceleration": [ + "100%", + "100%" + ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000" + ], + "travel_speed_z": [ + "0", + "0" + ], + "vertical_shell_speed": [ + "80%", + "80%" + ], + "prime_tower_flat_ironing": "1" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Balanced Strength @BBL H2 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Strength @BBL H2 0.6 nozzle.json new file mode 100644 index 00000000000..dc5b16f9077 --- /dev/null +++ b/resources/profiles/BBL/process/0.24mm Balanced Strength @BBL H2 0.6 nozzle.json @@ -0,0 +1,173 @@ +{ + "type": "process", + "name": "0.24mm Balanced Strength @BBL H2 0.6 nozzle", + "inherits": "fdm_process_single_0.24_nozzle_0.6", + "from": "system", + "setting_id": "GP240", + "instantiation": "true", + "description": "Strength profile for 0.6mm nozzle, prioritizing strength.", + "bridge_speed": [ + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000" + ], + "gap_infill_speed": [ + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300" + ], + "outer_wall_speed": [ + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2 0.6 nozzle" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "enable_overhang_speed": [ + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0" + ], + "slowdown_start_height": [ + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], + "overhang_1_4_speed": [ + "0", + "0" + ], + "overhang_2_4_speed": [ + "50", + "50" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], + "overhang_totally_speed": [ + "10", + "10" + ], + "print_extruder_id": [ + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "small_perimeter_speed": [ + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0" + ], + "smooth_coefficient": "4", + "sparse_infill_acceleration": [ + "100%", + "100%" + ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000" + ], + "travel_speed_z": [ + "0", + "0" + ], + "vertical_shell_speed": [ + "80%", + "80%" + ], + "prime_tower_flat_ironing": "1" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL H2.json b/resources/profiles/BBL/process/0.24mm Standard @BBL H2.json new file mode 100644 index 00000000000..821180ad11c --- /dev/null +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL H2.json @@ -0,0 +1,171 @@ +{ + "type": "process", + "name": "0.24mm Standard @BBL H2", + "inherits": "fdm_process_single_0.24", + "from": "system", + "setting_id": "GP241", + "instantiation": "true", + "default_acceleration": [ + "8000", + "8000" + ], + "initial_layer_speed": [ + "50", + "50" + ], + "internal_solid_infill_speed": [ + "250", + "300" + ], + "outer_wall_speed": [ + "200", + "200" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600" + ], + "travel_speed": [ + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2 0.4 nozzle" + ], + "gap_infill_speed": [ + "250", + "250" + ], + "inner_wall_speed": [ + "300", + "300" + ], + "initial_layer_infill_speed": [ + "105", + "105" + ], + "bridge_speed": [ + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "enable_overhang_speed": [ + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0" + ], + "slowdown_start_height": [ + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], + "overhang_1_4_speed": [ + "0", + "0" + ], + "overhang_2_4_speed": [ + "50", + "50" + ], + "overhang_3_4_speed": [ + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], + "overhang_totally_speed": [ + "10", + "10" + ], + "print_extruder_id": [ + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "small_perimeter_speed": [ + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0" + ], + "smooth_coefficient": "4", + "sparse_infill_acceleration": [ + "100%", + "100%" + ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000" + ], + "top_surface_speed": [ + "200", + "200" + ], + "travel_speed_z": [ + "0", + "0" + ], + "vertical_shell_speed": [ + "80%", + "80%" + ], + "prime_tower_flat_ironing": "1" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL H2 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL H2 0.6 nozzle.json index 77414ae0f16..c6b482fbf6f 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL H2 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL H2 0.6 nozzle.json @@ -10,9 +10,134 @@ "prime_tower_flat_ironing": "1", "prime_tower_width": "60", "travel_speed": [ + "1000", "1000" ], "compatible_printers": [ "Bambu Lab H2 0.6 nozzle" + ], + "bridge_speed": [ + "30", + "30" + ], + "initial_layer_infill_speed": [ + "55", + "55" + ], + "initial_layer_speed": [ + "35", + "35" + ], + "overhang_3_4_speed": [ + "15", + "15" + ], + "sparse_infill_speed": [ + "100", + "100" + ], + "top_surface_speed": [ + "150", + "150" + ], + "enable_overhang_speed": [ + "1", + "1" + ], + "gap_infill_speed": [ + "50", + "50" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "inner_wall_speed": [ + "150", + "150" + ], + "internal_solid_infill_speed": [ + "150", + "150" + ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], + "overhang_1_4_speed": [ + "0", + "0" + ], + "overhang_2_4_speed": [ + "50", + "50" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], + "print_extruder_id": [ + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "small_perimeter_speed": [ + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0" + ], + "sparse_infill_acceleration": [ + "100%", + "100%" + ], + "support_speed": [ + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000" + ], + "travel_speed_z": [ + "0", + "0" + ], + "vertical_shell_speed": [ + "80%", + "80%" + ], + "default_acceleration": [ + "10000", + "10000" + ], + "outer_wall_speed": [ + "120", + "120" + ], + "overhang_totally_speed": [ + "10", + "10" + ], + "support_interface_speed": [ + "80", + "80" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "travel_acceleration": [ + "10000", + "10000" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.32mm Balanced Strength @BBL H2 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Balanced Strength @BBL H2 0.8 nozzle.json new file mode 100644 index 00000000000..0ab35ee1c32 --- /dev/null +++ b/resources/profiles/BBL/process/0.32mm Balanced Strength @BBL H2 0.8 nozzle.json @@ -0,0 +1,173 @@ +{ + "type": "process", + "name": "0.32mm Balanced Strength @BBL H2 0.8 nozzle", + "inherits": "fdm_process_single_0.32_nozzle_0.8", + "from": "system", + "setting_id": "GP242", + "instantiation": "true", + "description": "Strength profile for 0.8mm nozzle, prioritizing strength.", + "bridge_speed": [ + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000" + ], + "gap_infill_speed": [ + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300" + ], + "outer_wall_speed": [ + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2 0.8 nozzle" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "enable_overhang_speed": [ + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0" + ], + "slowdown_start_height": [ + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], + "overhang_1_4_speed": [ + "0", + "0" + ], + "overhang_2_4_speed": [ + "50", + "50" + ], + "overhang_totally_speed": [ + "10", + "10" + ], + "print_extruder_id": [ + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "small_perimeter_speed": [ + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0" + ], + "smooth_coefficient": "4", + "sparse_infill_acceleration": [ + "100%", + "100%" + ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000" + ], + "travel_speed_z": [ + "0", + "0" + ], + "vertical_shell_speed": [ + "80%", + "80%" + ], + "prime_tower_flat_ironing": "1" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL H2 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL H2 0.8 nozzle.json index ebd909a951b..d2ee7c0c59b 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL H2 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL H2 0.8 nozzle.json @@ -10,9 +10,134 @@ "prime_tower_flat_ironing": "1", "prime_tower_width": "60", "travel_speed": [ + "1000", "1000" ], "compatible_printers": [ "Bambu Lab H2 0.8 nozzle" + ], + "bridge_speed": [ + "30", + "30" + ], + "initial_layer_infill_speed": [ + "55", + "55" + ], + "initial_layer_speed": [ + "35", + "35" + ], + "overhang_3_4_speed": [ + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5" + ], + "sparse_infill_speed": [ + "100", + "100" + ], + "top_surface_speed": [ + "150", + "150" + ], + "enable_overhang_speed": [ + "1", + "1" + ], + "gap_infill_speed": [ + "50", + "50" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "inner_wall_speed": [ + "150", + "150" + ], + "internal_solid_infill_speed": [ + "150", + "150" + ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], + "overhang_1_4_speed": [ + "0", + "0" + ], + "overhang_2_4_speed": [ + "50", + "50" + ], + "print_extruder_id": [ + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "small_perimeter_speed": [ + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0" + ], + "sparse_infill_acceleration": [ + "100%", + "100%" + ], + "support_speed": [ + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000" + ], + "travel_speed_z": [ + "0", + "0" + ], + "vertical_shell_speed": [ + "80%", + "80%" + ], + "default_acceleration": [ + "10000", + "10000" + ], + "outer_wall_speed": [ + "120", + "120" + ], + "overhang_totally_speed": [ + "10", + "10" + ], + "support_interface_speed": [ + "80", + "80" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "travel_acceleration": [ + "10000", + "10000" ] } \ No newline at end of file