From 1f86ce0438d6a2d5b6aa53b4e8494c516c968dbf Mon Sep 17 00:00:00 2001 From: SoftFever Date: Mon, 31 Jul 2023 18:48:25 +0800 Subject: [PATCH] Tweak profiles 1. Fix Voron Trident printable height issue #1641 2. Revamp Qidi X3 printer profiles 3. Turn on accel_to_decel_enable for klipper machine by default 4. Many other profiles tweaks --- .../0.15mm Optimal @Anycubic 4MaxPro2.json | 2 +- .../0.15mm Optimal @Anycubic Chiron.json | 2 +- .../0.15mm Optimal @Anycubic KobraMax.json | 2 +- .../0.15mm Optimal @Anycubic Vyper.json | 2 +- .../0.15mm Optimal @Anycubic i3MegaS.json | 2 +- .../0.20mm Standard @Anycubic 4MaxPro2.json | 2 +- .../0.20mm Standard @Anycubic Chiron.json | 2 +- .../0.20mm Standard @Anycubic KobraMax.json | 2 +- .../0.20mm Standard @Anycubic Vyper.json | 2 +- .../0.20mm Standard @Anycubic i3MegaS.json | 2 +- .../0.30mm Draft @Anycubic 4MaxPro2.json | 2 +- .../0.30mm Draft @Anycubic Chiron.json | 2 +- .../0.30mm Draft @Anycubic KobraMax.json | 2 +- .../process/0.30mm Draft @Anycubic Vyper.json | 2 +- .../0.30mm Draft @Anycubic i3MegaS.json | 2 +- .../0.15mm Optimal @Artillery Genius.json | 4 +- .../0.16mm Optimal @Artillery Hornet.json | 4 +- .../process/0.16mm Optimal @Artillery X1.json | 4 +- .../0.20mm Standard @Artillery Genius.json | 4 +- .../0.20mm Standard @Artillery Hornet.json | 4 +- .../0.20mm Standard @Artillery X1.json | 4 +- .../0.20mm Standard @Artillery X2.json | 4 +- .../0.24mm Draft @Artillery Hornet.json | 4 +- .../process/0.24mm Draft @Artillery X1.json | 4 +- .../0.25mm Draft @Artillery Genius.json | 4 +- .../0.16mm Optimal @Creality CR10V2.json | 2 +- .../0.16mm Optimal @Creality Ender3S1.json | 2 +- .../0.16mm Optimal @Creality Ender3S1Pro.json | 2 +- .../0.16mm Optimal @Creality Ender5.json | 2 +- .../0.16mm Optimal @Creality Ender5Plus.json | 2 +- .../0.16mm Optimal @Creality Ender5S.json | 2 +- .../0.16mm Optimal @Creality Ender5S1.json | 2 +- .../0.16mm Optimal @Creality Ender6.json | 2 +- .../0.20mm Standard @Creality CR10V2.json | 2 +- .../0.20mm Standard @Creality Ender3S1.json | 2 +- ...0.20mm Standard @Creality Ender3S1Pro.json | 2 +- .../0.20mm Standard @Creality Ender5.json | 2 +- .../0.20mm Standard @Creality Ender5Plus.json | 2 +- .../0.20mm Standard @Creality Ender5S.json | 2 +- .../0.20mm Standard @Creality Ender5S1.json | 2 +- .../0.20mm Standard @Creality Ender6.json | 2 +- .../FLSun/process/0.08mm Fine @FLSun Q5.json | 2 +- .../process/0.08mm Fine @FLSun QQSPro.json | 2 +- .../process/0.16mm Optimal @FLSun Q5.json | 2 +- .../process/0.16mm Optimal @FLSun QQSPro.json | 2 +- .../process/0.20mm Standard @FLSun Q5.json | 2 +- .../0.20mm Standard @FLSun QQSPro.json | 2 +- .../FLSun/process/0.24mm Draft @FLSun Q5.json | 2 +- .../process/0.24mm Draft @FLSun QQSPro.json | 2 +- .../process/0.30mm Extra Draft @FLSun Q5.json | 2 +- .../0.30mm Extra Draft @FLSun QQSPro.json | 2 +- resources/profiles/Kingroon.json | 10 ++- resources/profiles/Qidi.json | 10 ++- .../machine/Qidi X-CF Pro 0.4 nozzle.json | 3 - .../Qidi/machine/Qidi X-Max 0.4 nozzle.json | 3 - .../Qidi/machine/Qidi X-Max 3 0.4 nozzle.json | 69 +---------------- .../Qidi/machine/Qidi X-Plus 0.4 nozzle.json | 3 - .../machine/Qidi X-Plus 3 0.4 nozzle.json | 68 +---------------- .../machine/Qidi X-Smart 3 0.4 nozzle.json | 71 ++---------------- .../Qidi/machine/fdm_qidi_common.json | 4 +- .../Qidi/machine/fdm_qidi_x3_common.json | 74 +++++++++++++++++++ .../process/0.12mm Fine @Qidi XCFPro.json | 11 ++- .../Qidi/process/0.12mm Fine @Qidi XMax.json | 11 ++- .../Qidi/process/0.12mm Fine @Qidi XMax3.json | 41 ++-------- .../Qidi/process/0.12mm Fine @Qidi XPlus.json | 11 ++- .../process/0.12mm Fine @Qidi XPlus3.json | 41 ++-------- .../process/0.12mm Fine @Qidi XSmart3.json | 41 ++-------- .../process/0.16mm Optimal @Qidi XCFPro.json | 11 ++- .../process/0.16mm Optimal @Qidi XMax.json | 11 ++- .../process/0.16mm Optimal @Qidi XMax3.json | 41 ++-------- .../process/0.16mm Optimal @Qidi XPlus.json | 11 ++- .../process/0.16mm Optimal @Qidi XPlus3.json | 41 ++-------- .../process/0.16mm Optimal @Qidi XSmart3.json | 41 ++-------- .../process/0.20mm Standard @Qidi XCFPro.json | 11 ++- .../process/0.20mm Standard @Qidi XMax.json | 11 ++- .../process/0.20mm Standard @Qidi XMax3.json | 41 ++-------- .../process/0.20mm Standard @Qidi XPlus.json | 11 ++- .../process/0.20mm Standard @Qidi XPlus3.json | 41 ++-------- .../0.20mm Standard @Qidi XSmart3.json | 41 ++-------- .../process/0.25mm Draft @Qidi XCFPro.json | 11 ++- .../Qidi/process/0.25mm Draft @Qidi XMax.json | 11 ++- .../process/0.25mm Draft @Qidi XMax3.json | 41 ++-------- .../process/0.25mm Draft @Qidi XPlus.json | 9 +-- .../process/0.25mm Draft @Qidi XPlus3.json | 41 ++-------- .../process/0.25mm Draft @Qidi XSmart3.json | 41 ++-------- .../0.30mm Extra Draft @Qidi XCFPro.json | 9 +-- .../0.30mm Extra Draft @Qidi XMax.json | 9 +-- .../0.30mm Extra Draft @Qidi XMax3.json | 39 +--------- .../0.30mm Extra Draft @Qidi XPlus.json | 9 +-- .../0.30mm Extra Draft @Qidi XPlus3.json | 39 +--------- .../0.30mm Extra Draft @Qidi XSmart3.json | 39 +--------- .../Qidi/process/fdm_process_common.json | 2 +- .../Qidi/process/fdm_process_qidi_common.json | 10 +-- .../process/fdm_process_qidi_x3_common.json | 39 ++++++++++ .../process/0.10mm Fine @Raise3D Pro3.json | 2 +- .../0.10mm Fine @Raise3D Pro3Plus.json | 2 +- .../0.20mm Standard @Raise3D Pro3.json | 2 +- .../0.20mm Standard @Raise3D Pro3Plus.json | 2 +- .../process/0.25mm Draft @Raise3D Pro3.json | 2 +- .../0.25mm Draft @Raise3D Pro3Plus.json | 2 +- resources/profiles/Ratrig.json | 2 +- .../process/fdm_process_ratrig_common.json | 2 +- .../0.18mm Optimal @Sovol SV01Pro.json | 2 +- .../process/0.18mm Optimal @Sovol SV02.json | 2 +- .../process/0.18mm Optimal @Sovol SV05.json | 2 +- .../process/0.18mm Optimal @Sovol SV06.json | 2 +- .../0.18mm Optimal @Sovol SV06Plus.json | 2 +- .../0.20mm Standard @Sovol SV01Pro.json | 2 +- .../process/0.20mm Standard @Sovol SV02.json | 2 +- .../process/0.20mm Standard @Sovol SV05.json | 2 +- .../process/0.20mm Standard @Sovol SV06.json | 2 +- .../0.20mm Standard @Sovol SV06Plus.json | 2 +- .../process/0.12mm Fine @UltiMaker 2.json | 2 +- .../process/0.18mm Standard @UltiMaker 2.json | 2 +- .../process/0.25mm Darft @UltiMaker 2.json | 2 +- resources/profiles/Voron.json | 2 +- .../machine/Voron Trident 250 0.4 nozzle.json | 2 +- .../machine/Voron Trident 300 0.4 nozzle.json | 2 +- .../machine/Voron Trident 350 0.4 nozzle.json | 2 +- .../0.20mm Bambu Support W @Voron.json | 35 --------- .../process/fdm_process_voron_common.json | 8 +- .../0.16mm Optimal @Voxelab AquilaX2.json | 2 +- .../0.20mm Standard @Voxelab AquilaX2.json | 2 +- src/libslic3r/PrintConfig.cpp | 4 +- 124 files changed, 390 insertions(+), 965 deletions(-) create mode 100644 resources/profiles/Qidi/machine/fdm_qidi_x3_common.json create mode 100644 resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json delete mode 100644 resources/profiles/Voron/process/0.20mm Bambu Support W @Voron.json diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json index be8b0aac9d7..3365e4a66dc 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json index b3667590a75..bf5f2747de1 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json index 15b7801cf0d..2f35a208540 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json index 160f549fc4c..52524e631a8 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json index 292fcb6be1c..a897f07bf59 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json index 43692c24d2b..3f9a7cc36b4 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json index 2f779f3fd91..5720eee4d09 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json index db0932b2b62..a4452ff9a0f 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json index aeeec8f919c..ac0e124abff 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json index cc3ac1c3f63..b012e8cbe6b 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json index 4bb7ffdc1ba..86d0ae5a6ab 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json index 292d2356b10..0d588f0d6a3 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json index afb12834f0d..1a1f52b547a 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json index 74e47e1918d..3ccadfee595 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json index 49a67625f24..5065f6d4a12 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json b/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json index c8035f28e54..c64fc1eae38 100644 --- a/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json +++ b/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -55,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "3", "minimum_sparse_infill_area": "10", diff --git a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json index d94a11efe62..5e737355574 100644 --- a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json +++ b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -55,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "3", "minimum_sparse_infill_area": "10", diff --git a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json index 765c5cf4278..dad9c7a7102 100644 --- a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json +++ b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -55,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "3", "minimum_sparse_infill_area": "10", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json index 08a9832adfc..323f07e501b 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -55,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "3", "minimum_sparse_infill_area": "10", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json index 569cf6a84dd..09156abf733 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -55,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "3", "minimum_sparse_infill_area": "10", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json index 07c8c46dddc..26d7032d53b 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -55,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "3", "minimum_sparse_infill_area": "10", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json index 889e1ff25e8..6eb7f2427c4 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -55,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "3", "minimum_sparse_infill_area": "10", diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json index 86971d70a4f..ded74ebb9f3 100644 --- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json +++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -55,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "3", "minimum_sparse_infill_area": "10", diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json index 250c65c3cd9..8418407329a 100644 --- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json +++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -55,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "3", "minimum_sparse_infill_area": "10", diff --git a/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json b/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json index 317ebc8fb0c..cd178835b89 100644 --- a/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json +++ b/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -55,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "3", "minimum_sparse_infill_area": "10", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json index 4b17bed70bd..4048b563358 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json index 2fe80cdf601..63af5454ecf 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json index e94f85e7924..c497051089b 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json index 3cc676e6a2a..f8df381381d 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json index 15431d2c33c..40a53075f66 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json index 536dae11be0..7a2e1008bcd 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json index 7b6e4edea0a..ef26e290078 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json index cffe18e87c8..f981cf04630 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json index 3513c4abb37..bc563cfb802 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json index 6e59fbcb98a..611b66ba990 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json index 8b0cff2a20c..89180f86951 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json index 74e398efd2f..3d08e3f04a5 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json index f4b7316cd57..69aba813b8e 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json index 22c602e6209..acef3f1a39c 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json index e6784738d31..82865080575 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json index 5c01ad91b91..f70eeebf7e4 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json b/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json index a6583ce3854..569e87cd8c0 100644 --- a/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json index 0f199ba38ce..e5d62bf17c1 100644 --- a/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json index c65d26f8a39..6fa231f2879 100644 --- a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json index acc0d6c6462..49d6fd0056b 100644 --- a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json b/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json index dff16a95938..5a350f98d84 100644 --- a/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json index 1686f5c0b5c..6425a24cadd 100644 --- a/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json b/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json index cdf14f8ceba..dc0cbdf2dc4 100644 --- a/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json index 866fd9cc16c..450017dc3ee 100644 --- a/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json index 6f543a569e8..44b81650d96 100644 --- a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json index 458c7533a27..7651b18357f 100644 --- a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Kingroon.json b/resources/profiles/Kingroon.json index 68f0d47a9a5..fd8c80d604c 100644 --- a/resources/profiles/Kingroon.json +++ b/resources/profiles/Kingroon.json @@ -1,7 +1,7 @@ { "name": "Kingroon", "url": "https://kingroon.com/", - "version": "00.02.00.00", + "version": "01.06.04.00", "force_update": "0", "description": "Kingroon configuration files", "machine_model_list": [ @@ -19,6 +19,14 @@ "name": "fdm_process_common", "sub_path": "process/fdm_process_common.json" }, + { + "name": "0.08mm Standard @Kingroon KP3S PRO S1", + "sub_path": "process/0.08mm Standard @Kingroon KP3S PRO S1.json" + }, + { + "name": "0.12mm Standard @Kingroon KP3S PRO S1", + "sub_path": "process/0.12mm Standard @Kingroon KP3S PRO S1.json" + }, { "name": "0.20mm Standard @Kingroon KP3S PRO S1", "sub_path": "process/0.20mm Standard @Kingroon KP3S PRO S1.json" diff --git a/resources/profiles/Qidi.json b/resources/profiles/Qidi.json index abe9a9d0d5a..89c1eff3eba 100644 --- a/resources/profiles/Qidi.json +++ b/resources/profiles/Qidi.json @@ -1,6 +1,6 @@ { "name": "Qidi", - "version": "01.00.00.03", + "version": "01.06.00.00", "force_update": "0", "description": "Qidi configurations", "machine_model_list": [ @@ -37,6 +37,10 @@ { "name": "fdm_process_qidi_common", "sub_path": "process/fdm_process_qidi_common.json" + }, + { + "name": "fdm_process_qidi_x3_common", + "sub_path": "process/fdm_process_qidi_x3_common.json" }, { "name": "0.12mm Fine @Qidi XMPlus", @@ -253,6 +257,10 @@ { "name": "fdm_qidi_common", "sub_path": "machine/fdm_qidi_common.json" + }, + { + "name": "fdm_qidi_x3_common", + "sub_path": "machine/fdm_qidi_x3_common.json" }, { "name": "Qidi X-Plus 0.4 nozzle", diff --git a/resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json index 651fa477d75..d1b6d6bd74f 100644 --- a/resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json @@ -85,9 +85,6 @@ "retraction_minimum_travel": [ "2" ], - "retract_before_wipe": [ - "0%" - ], "retraction_length": [ "2" ], diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json index 0af41701ee1..94dcbd44da6 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json @@ -85,9 +85,6 @@ "retraction_minimum_travel": [ "2" ], - "retract_before_wipe": [ - "0%" - ], "retraction_length": [ "2" ], diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json index aa52cc51c56..9cd36a4cf39 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json @@ -4,8 +4,9 @@ "name": "Qidi X-Max 3 0.4 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_qidi_common", + "inherits": "fdm_qidi_x3_common", "printer_model": "Qidi X-Max 3", + "gcode_flavor": "klipper", "default_print_profile": "0.20mm Standard @Qidi XMax3", "nozzle_diameter": [ "0.4" @@ -18,63 +19,7 @@ ], "printable_height": "320", "nozzle_type": "hardened_steel", - "auxiliary_fan": "0", - "machine_max_acceleration_extruding": [ - "10000", - "1250" - ], - "machine_max_acceleration_retracting": [ - "10000", - "1250" - ], - "machine_max_acceleration_travel": [ - "1500", - "1250" - ], - "machine_max_acceleration_x": [ - "20000", - "1000" - ], - "machine_max_acceleration_y": [ - "20000", - "1000" - ], - "machine_max_acceleration_z": [ - "500", - "200" - ], - "machine_max_speed_e": [ - "30", - "120" - ], - "machine_max_speed_x": [ - "500", - "200" - ], - "machine_max_speed_y": [ - "500", - "200" - ], - "machine_max_speed_z": [ - "20", - "12" - ], - "machine_max_jerk_e": [ - "2.5", - "2.5" - ], - "machine_max_jerk_x": [ - "10", - "10" - ], - "machine_max_jerk_y": [ - "10", - "10" - ], - "machine_max_jerk_z": [ - "0.2", - "0.4" - ], + "auxiliary_fan": "1", "max_layer_height": [ "0.3" ], @@ -85,9 +30,6 @@ "retraction_minimum_travel": [ "2" ], - "retract_before_wipe": [ - "0%" - ], "retraction_length": [ "0.8" ], @@ -102,8 +44,5 @@ "machine_pause_gcode": "M0", "default_filament_profile": [ "Qidi Generic PLA" - ], - "machine_start_gcode": "G28\nM190 S[bed_temperature_initial_layer_single]\nG28 Z\n;G29\nG0 X4 Y5 Z50 F6000\nM109 S[nozzle_temperature_initial_layer]\nM82\nG0 Z0.3 F600\nG92 E-36.45\nG1 Y120 E-27.45 F3000\nG1 X6 E-27.30\nG1 Y5 E-18.30\nG1 X8 E-18.15\nG1 Y120 E-9.15\nG1 X10 E-9\nG1 Y5 E0", - "machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG91\nG0 Z10 F600\nG90\nG0 X0 Y0 F12000\nG0 Z[printable_height] F600", - "scan_first_layer": "0" + ] } \ No newline at end of file diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json index 99579257062..c722d7ca34e 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json @@ -85,9 +85,6 @@ "retraction_minimum_travel": [ "2" ], - "retract_before_wipe": [ - "0%" - ], "retraction_length": [ "2" ], diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json index 71a770eba91..cdfbda21593 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json @@ -4,8 +4,9 @@ "name": "Qidi X-Plus 3 0.4 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_qidi_common", + "inherits": "fdm_qidi_x3_common", "printer_model": "Qidi X-Plus 3", + "gcode_flavor": "klipper", "default_print_profile": "0.20mm Standard @Qidi XPlus3", "nozzle_diameter": [ "0.4" @@ -18,63 +19,6 @@ ], "printable_height": "270", "nozzle_type": "hardened_steel", - "auxiliary_fan": "0", - "machine_max_acceleration_extruding": [ - "10000", - "1250" - ], - "machine_max_acceleration_retracting": [ - "10000", - "1250" - ], - "machine_max_acceleration_travel": [ - "1500", - "1250" - ], - "machine_max_acceleration_x": [ - "20000", - "1000" - ], - "machine_max_acceleration_y": [ - "20000", - "1000" - ], - "machine_max_acceleration_z": [ - "500", - "200" - ], - "machine_max_speed_e": [ - "30", - "120" - ], - "machine_max_speed_x": [ - "500", - "200" - ], - "machine_max_speed_y": [ - "500", - "200" - ], - "machine_max_speed_z": [ - "20", - "12" - ], - "machine_max_jerk_e": [ - "2.5", - "2.5" - ], - "machine_max_jerk_x": [ - "10", - "10" - ], - "machine_max_jerk_y": [ - "10", - "10" - ], - "machine_max_jerk_z": [ - "0.2", - "0.4" - ], "max_layer_height": [ "0.3" ], @@ -85,9 +29,6 @@ "retraction_minimum_travel": [ "2" ], - "retract_before_wipe": [ - "0%" - ], "retraction_length": [ "0.8" ], @@ -102,8 +43,5 @@ "machine_pause_gcode": "M0", "default_filament_profile": [ "Qidi Generic PLA" - ], - "machine_start_gcode": "G28\nM190 S[bed_temperature_initial_layer_single]\nG28 Z\n;G29\nG0 X4 Y5 Z50 F6000\nM109 S[nozzle_temperature_initial_layer]\nM82\nG0 Z0.3 F600\nG92 E-36.45\nG1 Y120 E-27.45 F3000\nG1 X6 E-27.30\nG1 Y5 E-18.30\nG1 X8 E-18.15\nG1 Y120 E-9.15\nG1 X10 E-9\nG1 Y5 E0", - "machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG91\nG0 Z10 F600\nG90\nG0 X0 Y0 F12000\nG0 Z[printable_height] F600", - "scan_first_layer": "0" + ] } \ No newline at end of file diff --git a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json index 9f28e8ee28b..5bf031a4649 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json @@ -4,9 +4,10 @@ "name": "Qidi X-Smart 3 0.4 nozzle", "from": "system", "instantiation": "true", - "inherits": "fdm_qidi_common", + "inherits": "fdm_qidi_x3_common", "printer_model": "Qidi X-Smart 3", - "default_print_profile": "0.20mm Standard @Qidi XSmart3", + "gcode_flavor": "klipper", + "default_print_profile": "0.20mm Standard @Qidi XSmart3", "nozzle_diameter": [ "0.4" ], @@ -18,63 +19,7 @@ ], "printable_height": "170", "nozzle_type": "hardened_steel", - "auxiliary_fan": "0", - "machine_max_acceleration_extruding": [ - "10000", - "1250" - ], - "machine_max_acceleration_retracting": [ - "10000", - "1250" - ], - "machine_max_acceleration_travel": [ - "1500", - "1250" - ], - "machine_max_acceleration_x": [ - "20000", - "1000" - ], - "machine_max_acceleration_y": [ - "20000", - "1000" - ], - "machine_max_acceleration_z": [ - "500", - "200" - ], - "machine_max_speed_e": [ - "30", - "120" - ], - "machine_max_speed_x": [ - "500", - "200" - ], - "machine_max_speed_y": [ - "500", - "200" - ], - "machine_max_speed_z": [ - "20", - "12" - ], - "machine_max_jerk_e": [ - "2.5", - "2.5" - ], - "machine_max_jerk_x": [ - "10", - "10" - ], - "machine_max_jerk_y": [ - "10", - "10" - ], - "machine_max_jerk_z": [ - "0.2", - "0.4" - ], + "auxiliary_fan": "1", "max_layer_height": [ "0.3" ], @@ -85,9 +30,6 @@ "retraction_minimum_travel": [ "2" ], - "retract_before_wipe": [ - "0%" - ], "retraction_length": [ "0.8" ], @@ -102,8 +44,5 @@ "machine_pause_gcode": "M0", "default_filament_profile": [ "Qidi Generic PLA" - ], - "machine_start_gcode": "G28\nM190 S[bed_temperature_initial_layer_single]\nG28 Z\n;G29\nG0 X4 Y5 Z50 F6000\nM109 S[nozzle_temperature_initial_layer]\nM82\nG0 Z0.3 F600\nG92 E-36.45\nG1 Y120 E-27.45 F3000\nG1 X6 E-27.30\nG1 Y5 E-18.30\nG1 X8 E-18.15\nG1 Y120 E-9.15\nG1 X10 E-9\nG1 Y5 E0", - "machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG91\nG0 Z10 F600\nG90\nG0 X0 Y0 F12000\nG0 Z[printable_height] F600", - "scan_first_layer": "0" + ] } \ No newline at end of file diff --git a/resources/profiles/Qidi/machine/fdm_qidi_common.json b/resources/profiles/Qidi/machine/fdm_qidi_common.json index 4c27e39c0b4..4189610812b 100644 --- a/resources/profiles/Qidi/machine/fdm_qidi_common.json +++ b/resources/profiles/Qidi/machine/fdm_qidi_common.json @@ -135,5 +135,7 @@ "layer_change_gcode": "", "scan_first_layer": "0", "nozzle_type": "undefine", - "auxiliary_fan": "0" + "auxiliary_fan": "0", + "z_hop_types": "Normal Lift" + } diff --git a/resources/profiles/Qidi/machine/fdm_qidi_x3_common.json b/resources/profiles/Qidi/machine/fdm_qidi_x3_common.json new file mode 100644 index 00000000000..30df9ef5c70 --- /dev/null +++ b/resources/profiles/Qidi/machine/fdm_qidi_x3_common.json @@ -0,0 +1,74 @@ +{ + "type": "machine", + "name": "fdm_qidi_x3_common", + "from": "system", + "instantiation": "false", + "inherits": "fdm_qidi_common", + "gcode_flavor": "klipper", + "auxiliary_fan": "1", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "30", + "30" + ], + "machine_max_speed_x": [ + "600", + "600" + ], + "machine_max_speed_y": [ + "600", + "600" + ], + "machine_max_speed_z": [ + "20", + "20" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "10", + "10" + ], + "machine_max_jerk_y": [ + "10", + "10" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "change_filament_gcode": "", + "machine_pause_gcode": "M0", + "machine_start_gcode": "G28\nM141 S0\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29 ; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM83\nG0 Z5 F1200\nG0 X{first_layer_print_min[0]} Y{max(0, first_layer_print_min[1] - 2)} F12000\nG0 Z0.2 F600\nG1 E3 F1800\nG0 Z0.3 F600\nG1 X{min(first_layer_print_min[0] + 30,print_bed_max[0])} E6 F600", + "machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG90\nG0 Z{min(max_print_height,max_layer_z+10)} F600\nG0 X0 Y{print_bed_max[1]} F12000", + "scan_first_layer": "0" +} diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json index d086212427a..4f02556b5c5 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json @@ -13,7 +13,7 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "60", + "bridge_speed": "25", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", @@ -24,7 +24,6 @@ "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "0", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", @@ -35,7 +34,7 @@ "travel_acceleration": "0", "inner_wall_acceleration": "500", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.12", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", @@ -45,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -56,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -70,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.12", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json index 00d8a2180ae..5d317240423 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json @@ -13,7 +13,7 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "60", + "bridge_speed": "25", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", @@ -24,7 +24,6 @@ "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "0", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", @@ -35,7 +34,7 @@ "travel_acceleration": "0", "inner_wall_acceleration": "500", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.12", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", @@ -45,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -56,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -70,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.12", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax3.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax3.json index 5fc2f553110..e1787ab4d8f 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax3.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax3.json @@ -3,7 +3,7 @@ "setting_id": "GP004", "name": "0.12mm Fine @Qidi XMax3", "from": "system", - "inherits": "fdm_process_qidi_common", + "inherits": "fdm_process_qidi_x3_common", "instantiation": "true", "adaptive_layer_height": "1", "reduce_crossing_wall": "0", @@ -13,53 +13,37 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "50", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "10000", - "default_jerk": "10", - "top_surface_acceleration": "2000", - "top_surface_jerk": "10", "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "1", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", - "initial_layer_acceleration": "2000", - "travel_acceleration": "10000", - "travel_jerk": "30", - "inner_wall_acceleration": "10000", - "inner_wall_jerk": "10", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.12", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", "interface_shells": "0", "ironing_flow": "15%", "ironing_spacing": "0.1", - "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", "inner_wall_line_width": "0.45", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -73,16 +57,14 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.12", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", - "support_speed": "150", "support_threshold_angle": "30", "support_object_xy_distance": "50%", "tree_support_branch_angle": "40", @@ -92,19 +74,6 @@ "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", - "initial_layer_speed": "200", - "initial_layer_infill_speed": "200", - "initial_layer_jerk": "30", - "outer_wall_speed": "200", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "10", - "inner_wall_speed": "153", - "internal_solid_infill_speed": "200", - "top_surface_speed": "170", - "gap_infill_speed": "150", - "infill_jerk": "10", - "sparse_infill_speed": "200", - "travel_speed": "480", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "60", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json index 35144c680e3..817f42585e6 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json @@ -13,7 +13,7 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "60", + "bridge_speed": "25", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", @@ -24,7 +24,6 @@ "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "0", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", @@ -35,7 +34,7 @@ "travel_acceleration": "0", "inner_wall_acceleration": "500", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.12", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", @@ -45,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -56,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -70,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.12", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus3.json index df52bffc577..13aa70f64e3 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus3.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus3.json @@ -3,7 +3,7 @@ "setting_id": "GP004", "name": "0.12mm Fine @Qidi XPlus3", "from": "system", - "inherits": "fdm_process_qidi_common", + "inherits": "fdm_process_qidi_x3_common", "instantiation": "true", "adaptive_layer_height": "1", "reduce_crossing_wall": "0", @@ -13,53 +13,37 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "50", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "10000", - "default_jerk": "10", - "top_surface_acceleration": "2000", - "top_surface_jerk": "10", "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "1", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", - "initial_layer_acceleration": "2000", - "travel_acceleration": "10000", - "travel_jerk": "30", - "inner_wall_acceleration": "10000", - "inner_wall_jerk": "10", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.12", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", "interface_shells": "0", "ironing_flow": "15%", "ironing_spacing": "0.1", - "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", "inner_wall_line_width": "0.45", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -73,16 +57,14 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.12", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", - "support_speed": "150", "support_threshold_angle": "30", "support_object_xy_distance": "50%", "tree_support_branch_angle": "40", @@ -92,19 +74,6 @@ "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", - "initial_layer_speed": "200", - "initial_layer_infill_speed": "200", - "initial_layer_jerk": "30", - "outer_wall_speed": "200", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "10", - "inner_wall_speed": "153", - "internal_solid_infill_speed": "200", - "top_surface_speed": "170", - "gap_infill_speed": "150", - "infill_jerk": "10", - "sparse_infill_speed": "200", - "travel_speed": "480", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "60", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XSmart3.json index c15c56d0021..2d971ebcda2 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XSmart3.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XSmart3.json @@ -3,7 +3,7 @@ "setting_id": "GP004", "name": "0.12mm Fine @Qidi XSmart3", "from": "system", - "inherits": "fdm_process_qidi_common", + "inherits": "fdm_process_qidi_x3_common", "instantiation": "true", "adaptive_layer_height": "1", "reduce_crossing_wall": "0", @@ -13,53 +13,37 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "50", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "10000", - "default_jerk": "10", - "top_surface_acceleration": "2000", - "top_surface_jerk": "10", "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "1", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", - "initial_layer_acceleration": "2000", - "travel_acceleration": "10000", - "travel_jerk": "30", - "inner_wall_acceleration": "10000", - "inner_wall_jerk": "10", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.12", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", "interface_shells": "0", "ironing_flow": "15%", "ironing_spacing": "0.1", - "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", "inner_wall_line_width": "0.45", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -73,16 +57,14 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.12", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", - "support_speed": "150", "support_threshold_angle": "30", "support_object_xy_distance": "50%", "tree_support_branch_angle": "40", @@ -92,19 +74,6 @@ "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", - "initial_layer_speed": "200", - "initial_layer_infill_speed": "200", - "initial_layer_jerk": "30", - "outer_wall_speed": "153", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "10", - "inner_wall_speed": "180", - "internal_solid_infill_speed": "220", - "top_surface_speed": "187", - "gap_infill_speed": "150", - "infill_jerk": "10", - "sparse_infill_speed": "200", - "travel_speed": "480", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "60", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json index c1223c69767..8806562d94f 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json @@ -13,7 +13,7 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "60", + "bridge_speed": "25", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", @@ -24,7 +24,6 @@ "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "0", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", @@ -35,7 +34,7 @@ "travel_acceleration": "0", "inner_wall_acceleration": "500", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.16", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", @@ -45,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -56,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -70,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.16", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json index f9dca860aee..1589e58fe01 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json @@ -13,7 +13,7 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "60", + "bridge_speed": "25", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", @@ -24,7 +24,6 @@ "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "0", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", @@ -35,7 +34,7 @@ "travel_acceleration": "0", "inner_wall_acceleration": "500", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.16", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", @@ -45,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -56,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -70,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.16", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax3.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax3.json index cd9867303b5..f205c10a7f7 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax3.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax3.json @@ -3,7 +3,7 @@ "setting_id": "GP004", "name": "0.16mm Optimal @Qidi XMax3", "from": "system", - "inherits": "fdm_process_qidi_common", + "inherits": "fdm_process_qidi_x3_common", "instantiation": "true", "adaptive_layer_height": "1", "reduce_crossing_wall": "0", @@ -13,53 +13,37 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "50", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "10000", - "default_jerk": "10", - "top_surface_acceleration": "2000", - "top_surface_jerk": "10", "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "1", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", - "initial_layer_acceleration": "2000", - "travel_acceleration": "10000", - "travel_jerk": "30", - "inner_wall_acceleration": "10000", - "inner_wall_jerk": "10", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.16", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", "interface_shells": "0", "ironing_flow": "15%", "ironing_spacing": "0.1", - "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", "inner_wall_line_width": "0.45", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -73,16 +57,14 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.16", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", - "support_speed": "150", "support_threshold_angle": "30", "support_object_xy_distance": "50%", "tree_support_branch_angle": "40", @@ -92,19 +74,6 @@ "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", - "initial_layer_speed": "200", - "initial_layer_infill_speed": "200", - "initial_layer_jerk": "30", - "outer_wall_speed": "200", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "10", - "inner_wall_speed": "153", - "internal_solid_infill_speed": "200", - "top_surface_speed": "170", - "gap_infill_speed": "150", - "infill_jerk": "10", - "sparse_infill_speed": "200", - "travel_speed": "480", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "60", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json index 7026072ab33..4ac84ae206f 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json @@ -13,7 +13,7 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "60", + "bridge_speed": "25", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", @@ -24,7 +24,6 @@ "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "0", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", @@ -35,7 +34,7 @@ "travel_acceleration": "0", "inner_wall_acceleration": "500", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.16", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", @@ -45,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -56,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -70,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.16", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus3.json index e5244fe8a6c..5828f59c100 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus3.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus3.json @@ -3,7 +3,7 @@ "setting_id": "GP004", "name": "0.16mm Optimal @Qidi XPlus3", "from": "system", - "inherits": "fdm_process_qidi_common", + "inherits": "fdm_process_qidi_x3_common", "instantiation": "true", "adaptive_layer_height": "1", "reduce_crossing_wall": "0", @@ -13,53 +13,37 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "50", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "10000", - "default_jerk": "10", - "top_surface_acceleration": "2000", - "top_surface_jerk": "10", "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "1", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", - "initial_layer_acceleration": "2000", - "travel_acceleration": "10000", - "travel_jerk": "30", - "inner_wall_acceleration": "10000", - "inner_wall_jerk": "10", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.16", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", "interface_shells": "0", "ironing_flow": "15%", "ironing_spacing": "0.1", - "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", "inner_wall_line_width": "0.45", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -73,16 +57,14 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.16", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", - "support_speed": "150", "support_threshold_angle": "30", "support_object_xy_distance": "50%", "tree_support_branch_angle": "40", @@ -92,19 +74,6 @@ "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", - "initial_layer_speed": "200", - "initial_layer_infill_speed": "200", - "initial_layer_jerk": "30", - "outer_wall_speed": "200", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "10", - "inner_wall_speed": "153", - "internal_solid_infill_speed": "200", - "top_surface_speed": "170", - "gap_infill_speed": "150", - "infill_jerk": "10", - "sparse_infill_speed": "200", - "travel_speed": "480", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "60", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XSmart3.json index 6a5e10b5729..ac81885a634 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XSmart3.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XSmart3.json @@ -3,7 +3,7 @@ "setting_id": "GP004", "name": "0.16mm Optimal @Qidi XSmart3", "from": "system", - "inherits": "fdm_process_qidi_common", + "inherits": "fdm_process_qidi_x3_common", "instantiation": "true", "adaptive_layer_height": "1", "reduce_crossing_wall": "0", @@ -13,53 +13,37 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "50", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "10000", - "default_jerk": "10", - "top_surface_acceleration": "2000", - "top_surface_jerk": "10", "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "1", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", - "initial_layer_acceleration": "2000", - "travel_acceleration": "10000", - "travel_jerk": "30", - "inner_wall_acceleration": "10000", - "inner_wall_jerk": "10", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.16", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", "interface_shells": "0", "ironing_flow": "15%", "ironing_spacing": "0.1", - "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", "inner_wall_line_width": "0.45", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -73,16 +57,14 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.16", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", - "support_speed": "150", "support_threshold_angle": "30", "support_object_xy_distance": "50%", "tree_support_branch_angle": "40", @@ -92,19 +74,6 @@ "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", - "initial_layer_speed": "200", - "initial_layer_infill_speed": "200", - "initial_layer_jerk": "30", - "outer_wall_speed": "153", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "10", - "inner_wall_speed": "180", - "internal_solid_infill_speed": "220", - "top_surface_speed": "187", - "gap_infill_speed": "150", - "infill_jerk": "10", - "sparse_infill_speed": "200", - "travel_speed": "480", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "60", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json index 590dfb5f516..4bc19c327bd 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json @@ -13,7 +13,7 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "60", + "bridge_speed": "25", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", @@ -24,7 +24,6 @@ "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "0", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", @@ -35,7 +34,7 @@ "travel_acceleration": "0", "inner_wall_acceleration": "500", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.2", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", @@ -45,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -56,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -70,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.2", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json index 315d0cf1ffa..d6aeb92fea0 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json @@ -13,7 +13,7 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "60", + "bridge_speed": "25", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", @@ -24,7 +24,6 @@ "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "0", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", @@ -35,7 +34,7 @@ "travel_acceleration": "0", "inner_wall_acceleration": "500", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.2", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", @@ -45,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -56,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -70,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.2", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax3.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax3.json index 2bb340baed9..4e4eb6881d2 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax3.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax3.json @@ -3,7 +3,7 @@ "setting_id": "GP004", "name": "0.20mm Standard @Qidi XMax3", "from": "system", - "inherits": "fdm_process_qidi_common", + "inherits": "fdm_process_qidi_x3_common", "instantiation": "true", "adaptive_layer_height": "1", "reduce_crossing_wall": "0", @@ -13,53 +13,37 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "50", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "10000", - "default_jerk": "10", - "top_surface_acceleration": "2000", - "top_surface_jerk": "10", "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "1", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", - "initial_layer_acceleration": "2000", - "travel_acceleration": "10000", - "travel_jerk": "30", - "inner_wall_acceleration": "10000", - "inner_wall_jerk": "10", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.2", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", "interface_shells": "0", "ironing_flow": "15%", "ironing_spacing": "0.1", - "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", "inner_wall_line_width": "0.45", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -73,16 +57,14 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.2", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", - "support_speed": "150", "support_threshold_angle": "30", "support_object_xy_distance": "50%", "tree_support_branch_angle": "40", @@ -92,19 +74,6 @@ "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", - "initial_layer_speed": "200", - "initial_layer_infill_speed": "200", - "initial_layer_jerk": "30", - "outer_wall_speed": "200", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "10", - "inner_wall_speed": "153", - "internal_solid_infill_speed": "200", - "top_surface_speed": "170", - "gap_infill_speed": "150", - "infill_jerk": "10", - "sparse_infill_speed": "200", - "travel_speed": "480", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "60", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json index 63f85bf97a8..1b6776cba0d 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json @@ -13,7 +13,7 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "60", + "bridge_speed": "25", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", @@ -24,7 +24,6 @@ "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "0", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", @@ -35,7 +34,7 @@ "travel_acceleration": "0", "inner_wall_acceleration": "500", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.2", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", @@ -45,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -56,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -70,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.2", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus3.json index df6d6372414..5c28e896290 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus3.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus3.json @@ -3,7 +3,7 @@ "setting_id": "GP004", "name": "0.20mm Standard @Qidi XPlus3", "from": "system", - "inherits": "fdm_process_qidi_common", + "inherits": "fdm_process_qidi_x3_common", "instantiation": "true", "adaptive_layer_height": "1", "reduce_crossing_wall": "0", @@ -13,53 +13,37 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "50", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "10000", - "default_jerk": "10", - "top_surface_acceleration": "2000", - "top_surface_jerk": "10", "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "1", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", - "initial_layer_acceleration": "2000", - "travel_acceleration": "10000", - "travel_jerk": "30", - "inner_wall_acceleration": "10000", - "inner_wall_jerk": "10", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.2", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", "interface_shells": "0", "ironing_flow": "15%", "ironing_spacing": "0.1", - "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", "inner_wall_line_width": "0.45", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -73,16 +57,14 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.2", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", - "support_speed": "150", "support_threshold_angle": "30", "support_object_xy_distance": "50%", "tree_support_branch_angle": "40", @@ -92,19 +74,6 @@ "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", - "initial_layer_speed": "200", - "initial_layer_infill_speed": "200", - "initial_layer_jerk": "30", - "outer_wall_speed": "200", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "10", - "inner_wall_speed": "153", - "internal_solid_infill_speed": "200", - "top_surface_speed": "170", - "gap_infill_speed": "150", - "infill_jerk": "10", - "sparse_infill_speed": "200", - "travel_speed": "480", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "60", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XSmart3.json index 6744c79db6f..590c764b334 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XSmart3.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XSmart3.json @@ -3,7 +3,7 @@ "setting_id": "GP004", "name": "0.20mm Standard @Qidi XSmart3", "from": "system", - "inherits": "fdm_process_qidi_common", + "inherits": "fdm_process_qidi_x3_common", "instantiation": "true", "adaptive_layer_height": "1", "reduce_crossing_wall": "0", @@ -13,53 +13,37 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "50", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "10000", - "default_jerk": "10", - "top_surface_acceleration": "2000", - "top_surface_jerk": "10", "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "1", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", - "initial_layer_acceleration": "2000", - "travel_acceleration": "10000", - "travel_jerk": "30", - "inner_wall_acceleration": "10000", - "inner_wall_jerk": "10", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.2", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", "interface_shells": "0", "ironing_flow": "15%", "ironing_spacing": "0.1", - "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", "inner_wall_line_width": "0.45", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -73,16 +57,14 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.2", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", - "support_speed": "150", "support_threshold_angle": "30", "support_object_xy_distance": "50%", "tree_support_branch_angle": "40", @@ -92,19 +74,6 @@ "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", - "initial_layer_speed": "200", - "initial_layer_infill_speed": "200", - "initial_layer_jerk": "30", - "outer_wall_speed": "153", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "10", - "inner_wall_speed": "180", - "internal_solid_infill_speed": "220", - "top_surface_speed": "187", - "gap_infill_speed": "150", - "infill_jerk": "10", - "sparse_infill_speed": "200", - "travel_speed": "480", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "60", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json index 0b2635ccde3..5273b4903bf 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json @@ -13,7 +13,7 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "60", + "bridge_speed": "25", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", @@ -24,7 +24,6 @@ "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "0", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", @@ -35,7 +34,7 @@ "travel_acceleration": "0", "inner_wall_acceleration": "500", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.25", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", @@ -45,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -56,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -70,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.25", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json index 71ccf5168e3..2ea07fdb7e0 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json @@ -13,7 +13,7 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "60", + "bridge_speed": "25", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", @@ -24,7 +24,6 @@ "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "0", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", @@ -35,7 +34,7 @@ "travel_acceleration": "0", "inner_wall_acceleration": "500", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.25", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", @@ -45,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -56,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -70,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.25", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json index 69989a20916..f2c49b11b1b 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json @@ -3,7 +3,7 @@ "setting_id": "GP004", "name": "0.25mm Draft @Qidi XMax3", "from": "system", - "inherits": "fdm_process_qidi_common", + "inherits": "fdm_process_qidi_x3_common", "instantiation": "true", "adaptive_layer_height": "1", "reduce_crossing_wall": "0", @@ -13,53 +13,37 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "50", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "10000", - "default_jerk": "10", - "top_surface_acceleration": "2000", - "top_surface_jerk": "10", "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "1", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", - "initial_layer_acceleration": "2000", - "travel_acceleration": "10000", - "travel_jerk": "30", - "inner_wall_acceleration": "10000", - "inner_wall_jerk": "10", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.25", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", "interface_shells": "0", "ironing_flow": "15%", "ironing_spacing": "0.1", - "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", "inner_wall_line_width": "0.45", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -73,16 +57,14 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.25", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", - "support_speed": "150", "support_threshold_angle": "30", "support_object_xy_distance": "50%", "tree_support_branch_angle": "40", @@ -92,19 +74,6 @@ "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", - "initial_layer_speed": "200", - "initial_layer_infill_speed": "200", - "initial_layer_jerk": "30", - "outer_wall_speed": "200", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "10", - "inner_wall_speed": "153", - "internal_solid_infill_speed": "200", - "top_surface_speed": "170", - "gap_infill_speed": "150", - "infill_jerk": "10", - "sparse_infill_speed": "200", - "travel_speed": "480", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "60", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json index 3584c1b071f..7953275a029 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json @@ -13,7 +13,7 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "60", + "bridge_speed": "25", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", @@ -24,7 +24,6 @@ "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "0", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", @@ -45,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -56,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -70,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.25", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json index 60e1e6da281..a2503c9aa62 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json @@ -3,7 +3,7 @@ "setting_id": "GP004", "name": "0.25mm Draft @Qidi XPlus3", "from": "system", - "inherits": "fdm_process_qidi_common", + "inherits": "fdm_process_qidi_x3_common", "instantiation": "true", "adaptive_layer_height": "1", "reduce_crossing_wall": "0", @@ -13,53 +13,37 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "50", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "10000", - "default_jerk": "10", - "top_surface_acceleration": "2000", - "top_surface_jerk": "10", "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "1", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", - "initial_layer_acceleration": "2000", - "travel_acceleration": "10000", - "travel_jerk": "30", - "inner_wall_acceleration": "10000", - "inner_wall_jerk": "10", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.25", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", "interface_shells": "0", "ironing_flow": "15%", "ironing_spacing": "0.1", - "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", "inner_wall_line_width": "0.45", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -73,16 +57,14 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.25", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", - "support_speed": "150", "support_threshold_angle": "30", "support_object_xy_distance": "50%", "tree_support_branch_angle": "40", @@ -92,19 +74,6 @@ "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", - "initial_layer_speed": "200", - "initial_layer_infill_speed": "200", - "initial_layer_jerk": "30", - "outer_wall_speed": "200", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "10", - "inner_wall_speed": "153", - "internal_solid_infill_speed": "200", - "top_surface_speed": "170", - "gap_infill_speed": "150", - "infill_jerk": "10", - "sparse_infill_speed": "200", - "travel_speed": "480", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "60", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json index b9701845941..fb9a5a52ed5 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json @@ -3,7 +3,7 @@ "setting_id": "GP004", "name": "0.25mm Draft @Qidi XSmart3", "from": "system", - "inherits": "fdm_process_qidi_common", + "inherits": "fdm_process_qidi_x3_common", "instantiation": "true", "adaptive_layer_height": "1", "reduce_crossing_wall": "0", @@ -13,53 +13,37 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "50", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "10000", - "default_jerk": "10", - "top_surface_acceleration": "2000", - "top_surface_jerk": "10", "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "1", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", - "initial_layer_acceleration": "2000", - "travel_acceleration": "10000", - "travel_jerk": "30", - "inner_wall_acceleration": "10000", - "inner_wall_jerk": "10", "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_print_height": "0.25", "infill_combination": "0", "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", "interface_shells": "0", "ironing_flow": "15%", "ironing_spacing": "0.1", - "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", "inner_wall_line_width": "0.45", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -73,16 +57,14 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.25", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", - "support_speed": "150", "support_threshold_angle": "30", "support_object_xy_distance": "50%", "tree_support_branch_angle": "40", @@ -92,19 +74,6 @@ "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", - "initial_layer_speed": "200", - "initial_layer_infill_speed": "200", - "initial_layer_jerk": "30", - "outer_wall_speed": "153", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "10", - "inner_wall_speed": "180", - "internal_solid_infill_speed": "220", - "top_surface_speed": "187", - "gap_infill_speed": "150", - "infill_jerk": "10", - "sparse_infill_speed": "200", - "travel_speed": "480", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "60", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json index e804d6e1cec..d2f70ca377b 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json @@ -13,7 +13,7 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "60", + "bridge_speed": "25", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", @@ -24,7 +24,6 @@ "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "0", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", @@ -45,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -56,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -70,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.3", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json index 4c393ecddc3..8f76f024de4 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json @@ -13,7 +13,7 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "60", + "bridge_speed": "25", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", @@ -24,7 +24,6 @@ "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "0", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", @@ -45,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -56,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -70,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.30", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json index 850137322e8..f41597bbb56 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json @@ -3,7 +3,7 @@ "setting_id": "GP004", "name": "0.30mm Extra Draft @Qidi XMax3", "from": "system", - "inherits": "fdm_process_qidi_common", + "inherits": "fdm_process_qidi_x3_common", "instantiation": "true", "adaptive_layer_height": "1", "reduce_crossing_wall": "0", @@ -13,30 +13,19 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "50", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "10000", - "default_jerk": "10", - "top_surface_acceleration": "2000", - "top_surface_jerk": "10", "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "1", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", - "initial_layer_acceleration": "2000", - "travel_acceleration": "10000", - "travel_jerk": "30", - "inner_wall_acceleration": "10000", - "inner_wall_jerk": "10", "initial_layer_line_width": "0.42", "initial_layer_print_height": "0.3", "infill_combination": "0", @@ -45,21 +34,16 @@ "interface_shells": "0", "ironing_flow": "15%", "ironing_spacing": "0.1", - "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", "inner_wall_line_width": "0.45", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -73,16 +57,14 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.3", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", - "support_speed": "150", "support_threshold_angle": "30", "support_object_xy_distance": "50%", "tree_support_branch_angle": "40", @@ -92,19 +74,6 @@ "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", - "initial_layer_speed": "200", - "initial_layer_infill_speed": "200", - "initial_layer_jerk": "30", - "outer_wall_speed": "200", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "10", - "inner_wall_speed": "153", - "internal_solid_infill_speed": "200", - "top_surface_speed": "170", - "gap_infill_speed": "150", - "infill_jerk": "10", - "sparse_infill_speed": "200", - "travel_speed": "480", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "60", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json index fe93d859335..6ed675ca1e0 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json @@ -13,7 +13,7 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "60", + "bridge_speed": "25", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", @@ -24,7 +24,6 @@ "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "0", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", @@ -45,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", @@ -56,7 +55,7 @@ "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -70,7 +69,7 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.3", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json index 1e18cbdfa2a..c49d85c0fde 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json @@ -3,7 +3,7 @@ "setting_id": "GP004", "name": "0.30mm Extra Draft @Qidi XPlus3", "from": "system", - "inherits": "fdm_process_qidi_common", + "inherits": "fdm_process_qidi_x3_common", "instantiation": "true", "adaptive_layer_height": "1", "reduce_crossing_wall": "0", @@ -13,30 +13,19 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "50", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "10000", - "default_jerk": "10", - "top_surface_acceleration": "2000", - "top_surface_jerk": "10", "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "1", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", - "initial_layer_acceleration": "2000", - "travel_acceleration": "10000", - "travel_jerk": "30", - "inner_wall_acceleration": "10000", - "inner_wall_jerk": "10", "initial_layer_line_width": "0.42", "initial_layer_print_height": "0.3", "infill_combination": "0", @@ -45,21 +34,16 @@ "interface_shells": "0", "ironing_flow": "15%", "ironing_spacing": "0.1", - "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", "inner_wall_line_width": "0.45", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -73,16 +57,14 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.3", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", - "support_speed": "150", "support_threshold_angle": "30", "support_object_xy_distance": "50%", "tree_support_branch_angle": "40", @@ -92,19 +74,6 @@ "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", - "initial_layer_speed": "200", - "initial_layer_infill_speed": "200", - "initial_layer_jerk": "30", - "outer_wall_speed": "200", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "10", - "inner_wall_speed": "153", - "internal_solid_infill_speed": "200", - "top_surface_speed": "170", - "gap_infill_speed": "150", - "infill_jerk": "10", - "sparse_infill_speed": "200", - "travel_speed": "480", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "60", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json index fe56ffe7c94..69df5ac224c 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json @@ -3,7 +3,7 @@ "setting_id": "GP004", "name": "0.30mm Extra Draft @Qidi XSmart3", "from": "system", - "inherits": "fdm_process_qidi_common", + "inherits": "fdm_process_qidi_x3_common", "instantiation": "true", "adaptive_layer_height": "1", "reduce_crossing_wall": "0", @@ -13,30 +13,19 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "50", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "10000", - "default_jerk": "10", - "top_surface_acceleration": "2000", - "top_surface_jerk": "10", "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "1", "outer_wall_line_width": "0.4", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", - "initial_layer_acceleration": "2000", - "travel_acceleration": "10000", - "travel_jerk": "30", - "inner_wall_acceleration": "10000", - "inner_wall_jerk": "10", "initial_layer_line_width": "0.42", "initial_layer_print_height": "0.3", "infill_combination": "0", @@ -45,21 +34,16 @@ "interface_shells": "0", "ironing_flow": "15%", "ironing_spacing": "0.1", - "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", "inner_wall_line_width": "0.45", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", "seam_position": "aligned", - "skirt_distance": "6", + "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "2", "minimum_sparse_infill_area": "10", @@ -73,16 +57,14 @@ "support_on_build_plate_only": "0", "support_top_z_distance": "0.3", "support_filament": "0", - "support_line_width": "0.35", + "support_line_width": "0.42", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", "support_interface_spacing": "2.5", - "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", - "support_speed": "150", "support_threshold_angle": "30", "support_object_xy_distance": "50%", "tree_support_branch_angle": "40", @@ -92,19 +74,6 @@ "top_surface_line_width": "0.4", "top_shell_layers": "4", "top_shell_thickness": "0.8", - "initial_layer_speed": "200", - "initial_layer_infill_speed": "200", - "initial_layer_jerk": "30", - "outer_wall_speed": "153", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "10", - "inner_wall_speed": "180", - "internal_solid_infill_speed": "220", - "top_surface_speed": "187", - "gap_infill_speed": "150", - "infill_jerk": "10", - "sparse_infill_speed": "200", - "travel_speed": "480", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "60", diff --git a/resources/profiles/Qidi/process/fdm_process_common.json b/resources/profiles/Qidi/process/fdm_process_common.json index c00f623e363..9c35f4a8007 100644 --- a/resources/profiles/Qidi/process/fdm_process_common.json +++ b/resources/profiles/Qidi/process/fdm_process_common.json @@ -30,7 +30,7 @@ "interface_shells": "0", "detect_overhang_wall": "0", "reduce_infill_retraction": "0", - "filename_format": "{input_filename_base}.gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "wall_loops": "3", "inner_wall_line_width": "0.45", "inner_wall_speed": "40", diff --git a/resources/profiles/Qidi/process/fdm_process_qidi_common.json b/resources/profiles/Qidi/process/fdm_process_qidi_common.json index cdf866ad1c1..37459837e2a 100644 --- a/resources/profiles/Qidi/process/fdm_process_qidi_common.json +++ b/resources/profiles/Qidi/process/fdm_process_qidi_common.json @@ -11,7 +11,7 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "1", - "bridge_speed": "50", + "bridge_speed": "25", "brim_width": "5", "brim_object_gap": "0.1", "compatible_printers_condition": "", @@ -44,10 +44,10 @@ "reduce_infill_retraction": "1", "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", "inner_wall_line_width": "0.45", "wall_loops": "3", "print_settings_id": "", diff --git a/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json b/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json new file mode 100644 index 00000000000..f5bebc1b15e --- /dev/null +++ b/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json @@ -0,0 +1,39 @@ +{ + "type": "process", + "name": "fdm_process_qidi_x3_common", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_qidi_common", + "default_acceleration": "7000", + "top_surface_acceleration": "5000", + "initial_layer_acceleration": "1000", + "travel_acceleration": "10000", + "inner_wall_acceleration": "7000", + "outer_wall_acceleration": "5000", + "travel_speed": "500", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "150", + "inner_wall_speed": "200", + "internal_solid_infill_speed": "200", + "top_surface_speed": "120", + "gap_infill_speed": "150", + "sparse_infill_speed": "300", + "support_speed": "80", + "support_interface_speed": "100%", + "ironing_speed": "15", + "bridge_speed": "25", + "default_jerk": "0", + "initial_layer_jerk": "10", + "outer_wall_jerk": "7", + "infill_jerk": "10", + "travel_jerk": "10", + "inner_wall_jerk": "7", + "top_surface_jerk": "10", + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "overhang_1_4_speed": "80%", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10" +} diff --git a/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3.json b/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3.json index af384fc28f2..29dbbfa2dd8 100644 --- a/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3.json +++ b/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3.json @@ -44,7 +44,7 @@ "ironing_speed": "10", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3Plus.json b/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3Plus.json index 1dea3021e68..58c7d16bdd3 100644 --- a/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3Plus.json +++ b/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3Plus.json @@ -44,7 +44,7 @@ "ironing_speed": "10", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3.json b/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3.json index 1c2ecdc268a..610fe463b30 100644 --- a/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3.json +++ b/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3.json @@ -44,7 +44,7 @@ "ironing_speed": "10", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3Plus.json b/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3Plus.json index f5a59c1e137..47bf8e9ffa4 100644 --- a/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3Plus.json +++ b/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3Plus.json @@ -44,7 +44,7 @@ "ironing_speed": "10", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3.json b/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3.json index a82cca88bdf..cdeecdf34c2 100644 --- a/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3.json +++ b/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3.json @@ -44,7 +44,7 @@ "ironing_speed": "10", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3Plus.json b/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3Plus.json index 3260b2e7093..f82c448b539 100644 --- a/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3Plus.json +++ b/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3Plus.json @@ -44,7 +44,7 @@ "ironing_speed": "10", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Ratrig.json b/resources/profiles/Ratrig.json index 7d7b92eb8b5..59a26fb0d7f 100644 --- a/resources/profiles/Ratrig.json +++ b/resources/profiles/Ratrig.json @@ -1,6 +1,6 @@ { "name": "RatRig", - "version": "01.05.04.00", + "version": "01.06.04.00", "force_update": "0", "description": "RatRig configurations", "machine_model_list": [ diff --git a/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json b/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json index 951dfb0cbf3..b59e9324ec9 100644 --- a/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json +++ b/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json @@ -11,7 +11,7 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "0.80", - "bridge_speed": "50", + "bridge_speed": "25", "brim_width": "5", "brim_object_gap": "0.1", "compatible_printers_condition": "", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV01Pro.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV01Pro.json index 69b5949b63c..a9b5c1783c3 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV01Pro.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV01Pro.json @@ -45,7 +45,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV02.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV02.json index 0659b353cca..effbdbde85c 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV02.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV02.json @@ -45,7 +45,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV05.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV05.json index 62d5c1a1b85..ad6c0637f22 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV05.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV05.json @@ -45,7 +45,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06.json index 452fb312bde..6467cfb3dc3 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06.json @@ -45,7 +45,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06Plus.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06Plus.json index 91b5b47d3c5..94b1fe868fd 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06Plus.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06Plus.json @@ -45,7 +45,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01Pro.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01Pro.json index 26e702772f0..09d7cbfc430 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01Pro.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01Pro.json @@ -45,7 +45,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV02.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV02.json index 815fc3e031c..0694cf4d930 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV02.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV02.json @@ -45,7 +45,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV05.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV05.json index 0f8983d89e7..b552c3ddaa3 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV05.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV05.json @@ -45,7 +45,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06.json index 25ac14f9eaa..cc9b19da0c3 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06.json @@ -45,7 +45,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06Plus.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06Plus.json index f15d8abaa28..9dd8414b551 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06Plus.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06Plus.json @@ -45,7 +45,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json b/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json index 05aeb03482e..2d940f3bf49 100644 --- a/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json +++ b/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json b/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json index 0d70edc00f8..bf8a9e4442c 100644 --- a/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json +++ b/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "no ironing", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json b/resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json index 66163f3c3a0..dc30fd2ac70 100644 --- a/resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json +++ b/resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json @@ -44,7 +44,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Voron.json b/resources/profiles/Voron.json index d45febb002a..438d51df844 100644 --- a/resources/profiles/Voron.json +++ b/resources/profiles/Voron.json @@ -1,6 +1,6 @@ { "name": "Voron", - "version": "01.05.01.02", + "version": "01.06.04.01", "force_update": "0", "description": "Voron configurations", "machine_model_list": [ diff --git a/resources/profiles/Voron/machine/Voron Trident 250 0.4 nozzle.json b/resources/profiles/Voron/machine/Voron Trident 250 0.4 nozzle.json index c9a784eb780..d33c039ea10 100644 --- a/resources/profiles/Voron/machine/Voron Trident 250 0.4 nozzle.json +++ b/resources/profiles/Voron/machine/Voron Trident 250 0.4 nozzle.json @@ -15,5 +15,5 @@ "250x250", "0x250" ], - "printable_height": "225" + "printable_height": "250" } diff --git a/resources/profiles/Voron/machine/Voron Trident 300 0.4 nozzle.json b/resources/profiles/Voron/machine/Voron Trident 300 0.4 nozzle.json index 0f6d0c719bd..c05ae246268 100644 --- a/resources/profiles/Voron/machine/Voron Trident 300 0.4 nozzle.json +++ b/resources/profiles/Voron/machine/Voron Trident 300 0.4 nozzle.json @@ -15,5 +15,5 @@ "300x300", "0x300" ], - "printable_height": "275" + "printable_height": "250" } diff --git a/resources/profiles/Voron/machine/Voron Trident 350 0.4 nozzle.json b/resources/profiles/Voron/machine/Voron Trident 350 0.4 nozzle.json index ba1db126d47..c6b6f9f03bc 100644 --- a/resources/profiles/Voron/machine/Voron Trident 350 0.4 nozzle.json +++ b/resources/profiles/Voron/machine/Voron Trident 350 0.4 nozzle.json @@ -15,5 +15,5 @@ "350x350", "0x350" ], - "printable_height": "325" + "printable_height": "250" } diff --git a/resources/profiles/Voron/process/0.20mm Bambu Support W @Voron.json b/resources/profiles/Voron/process/0.20mm Bambu Support W @Voron.json deleted file mode 100644 index 1ba3ff8008f..00000000000 --- a/resources/profiles/Voron/process/0.20mm Bambu Support W @Voron.json +++ /dev/null @@ -1,35 +0,0 @@ -{ - "type": "process", - "setting_id": "GP004", - "name": "0.20mm Bambu Support W @Voron", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.20", - "enable_support": "1", - "support_interface_top_layers": "3", - "support_top_z_distance": "0.2", - "support_interface_loop_pattern": "1", - "support_interface_spacing": "0", - "support_interface_speed": "80", - "support_filament": "0", - "support_interface_filament": "0", - "enable_prime_tower": "1", - "initial_layer_speed": "50", - "initial_layer_infill_speed": "105", - "outer_wall_speed": "120", - "inner_wall_speed": "200", - "sparse_infill_speed": "300", - "internal_solid_infill_speed": "200", - "top_surface_speed": "100", - "gap_infill_speed": "100", - "travel_speed": "350", - "compatible_printers": [ - "Voron 2.4 250 0.4 nozzle", - "Voron 2.4 300 0.4 nozzle", - "Voron 2.4 350 0.4 nozzle", - "Voron Trident 250 0.4 nozzle", - "Voron Trident 300 0.4 nozzle", - "Voron Trident 350 0.4 nozzle", - "Voron 0.1 0.4 nozzle" - ] -} diff --git a/resources/profiles/Voron/process/fdm_process_voron_common.json b/resources/profiles/Voron/process/fdm_process_voron_common.json index 0dd70a8ac21..7f3c7209848 100644 --- a/resources/profiles/Voron/process/fdm_process_voron_common.json +++ b/resources/profiles/Voron/process/fdm_process_voron_common.json @@ -11,7 +11,7 @@ "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "0.95", - "bridge_speed": "50", + "bridge_speed": "25", "brim_width": "5", "brim_object_gap": "0.1", "compatible_printers_condition": "", @@ -45,11 +45,11 @@ "reduce_infill_retraction": "1", "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", + "overhang_1_4_speed": "80%", "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", "overhang_4_4_speed": "10", - "inner_wall_line_width": "0.45", + "inner_wall_line_width": "0.4", "wall_loops": "3", "print_settings_id": "", "raft_layers": "0", @@ -102,6 +102,8 @@ "xy_hole_compensation": "0", "xy_contour_compensation": "0", "enable_arc_fitting": "0", + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", "compatible_printers": [ "Voron 2.4 250 0.4 nozzle", "Voron 2.4 300 0.4 nozzle", diff --git a/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json b/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json index ee199398c88..d3dcc976b10 100644 --- a/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json +++ b/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json @@ -45,7 +45,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json b/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json index d34049d08b1..8086ad04dee 100644 --- a/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json +++ b/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json @@ -45,7 +45,7 @@ "ironing_speed": "15", "ironing_type": "top", "reduce_infill_retraction": "1", - "filename_format": "[input_filename_base].gcode", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "20", diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index 3408884ed94..53bd4cac5a5 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -1579,7 +1579,7 @@ void PrintConfigDef::init_fff_params() def->label = L("Enable accel_to_decel"); def->tooltip = L("Klipper's max_accel_to_decel will be adjusted automatically"); def->mode = comAdvanced; - def->set_default_value(new ConfigOptionBool(false)); + def->set_default_value(new ConfigOptionBool(true)); def = this->add("accel_to_decel_factor", coPercent); def->label = L("accel_to_decel"); @@ -2712,7 +2712,7 @@ void PrintConfigDef::init_fff_params() def->sidetext = L("mm or %"); def->min = 0; def->mode = comAdvanced; - def->set_default_value(new ConfigOptionFloatOrPercent(15,true)); + def->set_default_value(new ConfigOptionFloatOrPercent(10,true)); def = this->add("role_based_wipe_speed", coBool); def->label = L("Role base wipe speed");