diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json index e37da6dc428..7da1749debc 100644 --- a/resources/profiles/BBL.json +++ b/resources/profiles/BBL.json @@ -1,7 +1,7 @@ { "name": "Bambulab", "url": "http://www.bambulab.com/Parameters/vendor/BBL.json", - "version": "01.09.00.18", + "version": "01.09.00.23", "force_update": "0", "description": "the initial version of BBL configurations", "machine_model_list": [ @@ -937,6 +937,14 @@ "name": "Generic PPS @base", "sub_path": "filament/Generic PPS @base.json" }, + { + "name": "Bambu PPS-CF @base", + "sub_path": "filament/Bambu PPS-CF @base.json" + }, + { + "name": "Bambu PPA-CF @base", + "sub_path": "filament/Bambu PPA-CF @base.json" + }, { "name": "Generic PPA-CF @base", "sub_path": "filament/Generic PPA-CF @base.json" @@ -2345,6 +2353,18 @@ "name": "Generic PPS @BBL X1E", "sub_path": "filament/Generic PPS @BBL X1E.json" }, + { + "name": "Bambu PPS-CF @BBL X1E", + "sub_path": "filament/Bambu PPS-CF @BBL X1E.json" + }, + { + "name": "Bambu PPA-CF @BBL X1C", + "sub_path": "filament/Bambu PPA-CF @BBL X1C.json" + }, + { + "name": "Bambu PPA-CF @BBL X1E", + "sub_path": "filament/Bambu PPA-CF @BBL X1E.json" + }, { "name": "Generic PPA-CF @BBL X1E", "sub_path": "filament/Generic PPA-CF @BBL X1E.json" diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X1C.json new file mode 100644 index 00000000000..5d2b3f6a389 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X1C.json @@ -0,0 +1,22 @@ +{ + "type": "filament", + "setting_id": "GFSN06_00", + "name": "Bambu PPA-CF @BBL X1C", + "from": "system", + "instantiation": "true", + "inherits": "Bambu PPA-CF @base", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X1E.json new file mode 100644 index 00000000000..b58b523d7ef --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X1E.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "setting_id": "GFSN06_01", + "name": "Bambu PPA-CF @BBL X1E", + "from": "system", + "instantiation": "true", + "inherits": "Bambu PPA-CF @base", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @base.json b/resources/profiles/BBL/filament/Bambu PPA-CF @base.json new file mode 100644 index 00000000000..2b8290e4cf9 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PPA-CF @base.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Bambu PPA-CF @base", + "inherits": "fdm_filament_ppa", + "from": "system", + "filament_id": "GFN06", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials." +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL X1E.json new file mode 100644 index 00000000000..a4694394be2 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL X1E.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Bambu PPS-CF @BBL X1E", + "inherits": "Bambu PPS-CF @base", + "from": "system", + "setting_id": "GFST02_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPS-CF @base.json b/resources/profiles/BBL/filament/Bambu PPS-CF @base.json new file mode 100644 index 00000000000..391e986bf72 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PPS-CF @base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Bambu PPS-CF @base", + "inherits": "fdm_filament_pps", + "from": "system", + "filament_id": "GFT02", + "instantiation": "false", + "fan_max_speed": [ + "30" + ], + "filament_cost": [ + "175" + ], + "filament_density": [ + "1.26" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_type": [ + "PPS-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature_range_high": [ + "350" + ], + "nozzle_temperature_range_low": [ + "310" + ], + "overhang_fan_threshold": [ + "25%" + ], + "required_nozzle_HRC": [ + "40" + ], + "temperature_vitrification": [ + "220" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json index 696ea395e14..b09cbf6aee5 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json @@ -6,18 +6,45 @@ "filament_id": "GFN99", "setting_id": "GFSN98_10", "instantiation": "true", + "fan_cooling_layer_time": [ + "60" + ], + "fan_max_speed": [ + "85" + ], + "fan_min_speed": [ + "40" + ], "filament_max_volumetric_speed": [ - "16" + "12" ], "nozzle_temperature": [ - "280" + "260" ], "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ "280" ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "95" + ], + "overhang_fan_threshold": [ + "10%" + ], "required_nozzle_HRC": [ "3" ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json index a9da7587091..b198ff4dda6 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json @@ -65,5 +65,5 @@ "machine_end_gcode": ";===== date: 20231229 =====================\nG392 S0 ;turn off nozzle clog detect\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\n{if !spiral_mode && print_sequence != \"by object\"}\nM1002 judge_flag timelapse_record_flag\nM622 J1\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM991 S0 P-1 ;end timelapse at safe pos\nM623\n{endif}\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n;G1 X27 F15000 ; wipe\n\n; pull back filament to AMS\nM620 S255\nG1 X267 F15000\nT255\nG1 X-28.5 F18000\nG1 X-48.2 F3000\nG1 X-28.5 F18000\nG1 X-48.2 F3000\nM621 S255\n\nM104 S0 ; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 256}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z256 F600\n G1 Z256\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X-48 Y180 F3600\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M40 E42 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C46 D10 M80 E46 F10 N80\nM1006 A44 B20 L100 C39 D20 M60 E48 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C48 D10 M60 E44 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A44 B20 L100 C49 D20 M80 E41 F20 N80\nM1006 A0 B20 L100 C0 D20 M60 E0 F20 N80\nM1006 A0 B20 L100 C37 D20 M30 E37 F20 N60\nM1006 W\n;=====printer finish sound=========\n\n;M17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM400\nM18 X Y Z\n\n", "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change", "time_lapse_gcode": ";===================== date: 20240606 =====================\n{if !spiral_mode && print_sequence != \"by object\"}\n; don't support timelapse gcode in spiral_mode and by object sequence for I3 structure printer\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\nG92 E0\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Z{max_layer_z + 0.4}\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-48.2 F3000 ; move to safe pos\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 X0 F18000\nM623\n\nM622.1 S1\nM1002 judge_flag g39_3rd_layer_detect_flag\nM622 J1\n ; enable nozzle clog detect at 3rd layer\n {if layer_num == 2}\n M400\n G90\n M83\n M204 S5000\n G0 Z2 F4000\n G0 X261 Y250 F20000\n M400 P200\n G39 S1\n G0 Z2 F4000\n {endif}\n\n\n M622.1 S1\n M1002 judge_flag g39_detection_flag\n M622 J1\n {if !in_head_wrap_detect_zone}\n M622.1 S0\n M1002 judge_flag g39_mass_exceed_flag\n M622 J1\n {if layer_num > 2}\n G392 S0\n M400\n G90\n M83\n M204 S5000\n G0 Z{max_layer_z + 0.4} F4000\n G39.3 S1\n G0 Z{max_layer_z + 0.4} F4000\n G392 S0\n {endif}\n M623\n {endif}\n M623\nM623\n{endif}\n", - "change_filament_gcode": ";===== machine: A1 =========================\n;===== date: 20231225 =======================\nM1007 S0 ; turn off mass estimation\nG392 S0\nM620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1}\nG17\nG2 Z{max_layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n\nG1 X267 F18000\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nM620.10 A0 F[old_filament_e_feedrate]\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\nM620.10 A1 F[new_filament_e_feedrate] L[flush_length] H[nozzle_diameter] T[nozzle_temperature_range_high]\n\nG1 Y128 F9000\n\n{if next_extruder < 255}\nM400\n\nG92 E0\nM628 S0\n\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S[nozzle_temperature_range_high]\nM106 P1 S60\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\nM400\nM1002 set_filament_type:{filament_type[next_extruder]}\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\nM629\n\nM400\nM106 P1 S60\nM109 S[new_filament_temp]\nG1 E6 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM106 P1 S0\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\n\nM9833 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\nM1002 judge_flag filament_need_cali_flag\nM622 J1\n M106 P1 S178\n M400 S4\n G1 X-38.2 F18000\n G1 X-48.2 F3000\n G1 X-38.2 F18000 ;wipe and shake\n G1 X-48.2 F3000\n G1 X-38.2 F12000 ;wipe and shake\n G1 X-48.2 F3000\n M400\n M106 P1 S0 \nM623\n\nM621 S[next_extruder]A\nG392 S0\n\nM1007 S1\n" + "change_filament_gcode": ";===== machine: A1 =========================\n;===== date: 20240830 =======================\nM1007 S0 ; turn off mass estimation\nG392 S0\nM620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1}\nG17\nG2 Z{max_layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n\nG1 X267 F18000\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nM620.10 A0 F[old_filament_e_feedrate]\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\nM620.10 A1 F[new_filament_e_feedrate] L[flush_length] H[nozzle_diameter] T[nozzle_temperature_range_high]\n\nG1 Y128 F9000\n\n{if next_extruder < 255}\nM400\n\nG92 E0\nM628 S0\n\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S[nozzle_temperature_range_high]\nM106 P1 S60\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\nM400\nM1002 set_filament_type:{filament_type[next_extruder]}\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\nM629\n\nM400\nM106 P1 S60\nM109 S[new_filament_temp]\nG1 E6 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM106 P1 S0\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\n\nM622.1 S0\nM9833 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\nM1002 judge_flag filament_need_cali_flag\nM622 J1\n G92 E0\n G1 E-[new_retract_length_toolchange] F1800\n M400\n \n M106 P1 S178\n M400 S4\n G1 X-38.2 F18000\n G1 X-48.2 F3000\n G1 X-38.2 F18000 ;wipe and shake\n G1 X-48.2 F3000\n G1 X-38.2 F12000 ;wipe and shake\n G1 X-48.2 F3000\n M400\n M106 P1 S0 \n \n\nM623\n\nM621 S[next_extruder]A\nG392 S0\n\nM1007 S1\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json index 91e469d8e3d..2608b6b731f 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json @@ -17,6 +17,7 @@ "Bambu PLA Basic @BBL A1M" ], "default_print_profile": "0.20mm Standard @BBL A1M", + "extruder_clearance_height_to_lid": "180", "extruder_clearance_height_to_rod": "25", "extruder_clearance_max_radius": "73", "extruder_clearance_radius": "73", @@ -67,9 +68,9 @@ "Bambu Lab X1E 0.4 nozzle", "Bambu Lab A1 0.4 nozzle" ], - "machine_start_gcode": ";===== machine: A1 mini =========================\n;===== date: 20240204 =====================\n\n;===== start to heat heatbead&hotend==========\nM1002 gcode_claim_action : 2\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM104 S170\nM140 S[bed_temperature_initial_layer_single]\nG392 S0 ;turn off clog detect\nM9833.2\n;=====start printer sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B0 L100 C37 D10 M100 E37 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E43 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C49 D10 M100 E49 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C39 D10 M100 E48 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 W\nM18\n;=====avoid end stop =================\nG91\nG380 S2 Z30 F1200\nG380 S3 Z-20 F1200\nG1 Z5 F1200\nG90\n\n;===== reset machine status =================\nM204 S6000\n\nM630 S0 P0\nG91\nM17 Z0.3 ; lower the z-motor current\n\nG90\nM17 X0.7 Y0.9 Z0.5 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM83\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== prepare print temperature and material ==========\nM400\nM18\nM109 S100 H170\nM104 S170\nM400\nM17\nM400\nG28 X\n\nM211 X0 Y0 Z0 ;turn off soft endstop ; turn off soft endstop to prevent protential logic problem\n\nM975 S1 ; turn on\n\nG1 X0.0 F30000\nG1 X-13.5 F3000\n\nM620 M ;enable remap\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n G392 S0 ;turn on clog detect\n M1002 gcode_claim_action : 4\n M400\n M1002 set_filament_type:UNKNOWN\n M109 S[nozzle_temperature_initial_layer]\n M104 S250\n M400\n T[initial_no_support_extruder]\n G1 X-13.5 F3000\n M400\n M620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n M109 S250 ;set nozzle to common flush temp\n M106 P1 S0\n G92 E0\n G1 E50 F200\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M104 S{nozzle_temperature_range_high[initial_no_support_extruder]}\n G92 E0\n G1 E50 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n M400\n M106 P1 S178\n G92 E0\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G92 E0\n G1 E-0.5 F300\n\n G1 X0 F30000\n G1 X-13.5 F3000\n G1 X0 F30000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X0 F30000\n G1 X-13.5 F3000\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G392 S0 ;turn off clog detect\nM621 S[initial_no_support_extruder]A\n\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== mech mode fast check============================\nM1002 gcode_claim_action : 3\nG0 X25 Y175 F20000 ; find a soft place to home\n;M104 S0\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nM104 S170\n\n; build plate detect\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n G39.4\n M400\nM623\n\nG1 Z5 F3000\nG1 X90 Y-1 F30000\nM400 P200\nM970.3 Q1 A7 K0 O2\nM974 Q1 S2 P0\n\nG1 X90 Y0 Z5 F30000\nM400 P200\nM970 Q0 A10 B50 C90 H15 K0 M20 O3\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X-1 Y10\nG28 X ; re-home XY\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\n\nM104 S170 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\nM211 S; push soft endstop status\nM211 X0 Y0 Z0 ;turn off Z axis endstop\n\nM83\nG1 E-1 F500\nG90\nM83\n\nM109 S170\nM104 S140\nG0 X90 Y-4 F30000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X91 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X92 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X93 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X94 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X95 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X96 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X97 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X98 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\n\nG1 Z5 F30000\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\nG1 X25 Y175 F30000.1 ;Brush material\nG1 Z0.2 F30000.1\nG1 Y185\nG91\nG1 X-30 F30000\nG1 Y-2\nG1 X27\nG1 Y1.5\nG1 X-28\nG1 Y-2\nG1 X30\nG1 Y1.5\nG1 X-30\nG90\nM83\n\nG1 Z5 F3000\nG0 X50 Y175 F20000 ; find a soft place to home\nG28 Z P0 T300; home z with low precision, permit 300deg temperature\nG29.2 S0 ; turn off ABL\n\nG0 X85 Y185 F10000 ;move to exposed steel surface and stop the nozzle\nG0 Z-1.01 F10000\nG91\n\nG2 I1 J0 X2 Y0 F2000.1\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\n\nG90\nG1 Z5 F30000\nG1 X25 Y175 F30000.1 ;Brush material\nG1 Z0.2 F30000.1\nG1 Y185\nG91\nG1 X-30 F30000\nG1 Y-2\nG1 X27\nG1 Y1.5\nG1 X-28\nG1 Y-2\nG1 X30\nG1 Y1.5\nG1 X-30\nG90\nM83\n\nG1 Z5\nG0 X55 Y175 F20000 ; find a soft place to home\nG28 Z P0 T300; home z with low precision, permit 300deg temperature\nG29.2 S0 ; turn off ABL\n\nG1 Z10\nG1 X85 Y185\nG1 Z-1.01\nG1 X95\nG1 X90\n\nM211 R; pop softend status\n\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== wait heatbed ====================\nM1002 gcode_claim_action : 2\nM104 S0\nM190 S[bed_temperature_initial_layer_single];set bed temp\nM109 S140\n\nG1 Z5 F3000\nG29.2 S1\nG1 X10 Y10 F20000\n\n;===== bed leveling ==================================\n;M1002 set_flag g29_before_print_flag=1\nM1002 judge_flag g29_before_print_flag\nM622 J1\n M1002 gcode_claim_action : 1\n G29 A1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28 T145\n\nM623\n\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\n\nG1 X-13.5 Y0 Z10 F10000\nG1 E1.2 F500\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S{nozzle_temperature[initial_extruder]}\nM400\n\nM412 S1 ; ===turn on filament runout detection===\nM400 P10\n\nG392 S0 ;turn on clog detect\n\nM620.3 W1; === turn on filament tangle detection===\nM400 S2\n\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n;M1002 set_flag extrude_cali_flag=1\nM1002 judge_flag extrude_cali_flag\nM622 J1\n M1002 gcode_claim_action : 8\n \n M400\n M900 K0.0 L1000.0 M1.0\n G90\n M83\n G0 X68 Y-4 F30000\n G0 Z0.3 F18000 ;Move to start position\n M400\n G0 X88 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\n G0 X93 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X98 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X103 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X108 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X113 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 Y0 Z0 F20000\n M400\n \n G1 X-13.5 Y0 Z10 F10000\n M400\n \n G1 E10 F{outer_wall_volumetric_speed/2.4*60}\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X-13.5 F3000\n M400\n M106 P1 S0\n\n M1002 judge_last_extrude_cali_success\n M622 J0\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n M400\n M106 P1 S0\n M623\n \n G1 X-13.5 F3000\n M400\n M984 A0.1 E1 S1 F{outer_wall_volumetric_speed/2.4}\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X-13.5 F3000\n M400\n M106 P1 S0\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n;===== extrude cali test ===============================\nM104 S{nozzle_temperature_initial_layer[initial_extruder]}\nG90\nM83\nG0 X68 Y-2.5 F30000\nG0 Z0.3 F18000 ;Move to start position\nG0 X88 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X93 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X98 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X103 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X108 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X113 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X115 Z0 F20000\nG0 Z5\nM400\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\n\nM400 ; wait all motion done before implement the emprical L parameters\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.02} ; for Textured PEI Plate\n{endif}\n\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n\nM211 X0 Y0 Z0 ;turn off soft endstop\nM1007 S1\n\n\n\n", + "machine_start_gcode": ";===== machine: A1 mini =========================\n;===== date: 20240620 =====================\n\n;===== start to heat heatbead&hotend==========\nM1002 gcode_claim_action : 2\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM104 S170\nM140 S[bed_temperature_initial_layer_single]\nG392 S0 ;turn off clog detect\nM9833.2\n;=====start printer sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B0 L100 C37 D10 M100 E37 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E43 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C49 D10 M100 E49 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C39 D10 M100 E48 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 W\nM18\n;=====avoid end stop =================\nG91\nG380 S2 Z30 F1200\nG380 S3 Z-20 F1200\nG1 Z5 F1200\nG90\n\n;===== reset machine status =================\nM204 S6000\n\nM630 S0 P0\nG91\nM17 Z0.3 ; lower the z-motor current\n\nG90\nM17 X0.7 Y0.9 Z0.5 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM83\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== prepare print temperature and material ==========\nM400\nM18\nM109 S100 H170\nM104 S170\nM400\nM17\nM400\nG28 X\n\nM211 X0 Y0 Z0 ;turn off soft endstop ; turn off soft endstop to prevent protential logic problem\n\nM975 S1 ; turn on\n\nG1 X0.0 F30000\nG1 X-13.5 F3000\n\nM620 M ;enable remap\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n G392 S0 ;turn on clog detect\n M1002 gcode_claim_action : 4\n M400\n M1002 set_filament_type:UNKNOWN\n M109 S[nozzle_temperature_initial_layer]\n M104 S250\n M400\n T[initial_no_support_extruder]\n G1 X-13.5 F3000\n M400\n M620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n M109 S250 ;set nozzle to common flush temp\n M106 P1 S0\n G92 E0\n G1 E50 F200\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M104 S{nozzle_temperature_range_high[initial_no_support_extruder]}\n G92 E0\n G1 E50 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n M400\n M106 P1 S178\n G92 E0\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G92 E0\n G1 E-0.5 F300\n\n G1 X0 F30000\n G1 X-13.5 F3000\n G1 X0 F30000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X0 F30000\n G1 X-13.5 F3000\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G392 S0 ;turn off clog detect\nM621 S[initial_no_support_extruder]A\n\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== mech mode fast check============================\nM1002 gcode_claim_action : 3\nG0 X25 Y175 F20000 ; find a soft place to home\n;M104 S0\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nM104 S170\n\n; build plate detect\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n G39.4\n M400\nM623\n\nG1 Z5 F3000\nG1 X90 Y-1 F30000\nM400 P200\nM970.3 Q1 A7 K0 O2\nM974 Q1 S2 P0\n\nG1 X90 Y0 Z5 F30000\nM400 P200\nM970 Q0 A10 B50 C90 H15 K0 M20 O3\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X-1 Y10\nG28 X ; re-home XY\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\n\nM104 S170 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\nM211 S; push soft endstop status\nM211 X0 Y0 Z0 ;turn off Z axis endstop\n\nM83\nG1 E-1 F500\nG90\nM83\n\nM109 S170\nM104 S140\nG0 X90 Y-4 F30000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X91 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X92 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X93 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X94 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X95 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X96 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X97 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X98 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\n\nG1 Z5 F30000\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\nG1 X25 Y175 F30000.1 ;Brush material\nG1 Z0.2 F30000.1\nG1 Y185\nG91\nG1 X-30 F30000\nG1 Y-2\nG1 X27\nG1 Y1.5\nG1 X-28\nG1 Y-2\nG1 X30\nG1 Y1.5\nG1 X-30\nG90\nM83\n\nG1 Z5 F3000\nG0 X50 Y175 F20000 ; find a soft place to home\nG28 Z P0 T300; home z with low precision, permit 300deg temperature\nG29.2 S0 ; turn off ABL\n\nG0 X85 Y185 F10000 ;move to exposed steel surface and stop the nozzle\nG0 Z-1.01 F10000\nG91\n\nG2 I1 J0 X2 Y0 F2000.1\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\n\nG90\nG1 Z5 F30000\nG1 X25 Y175 F30000.1 ;Brush material\nG1 Z0.2 F30000.1\nG1 Y185\nG91\nG1 X-30 F30000\nG1 Y-2\nG1 X27\nG1 Y1.5\nG1 X-28\nG1 Y-2\nG1 X30\nG1 Y1.5\nG1 X-30\nG90\nM83\n\nG1 Z5\nG0 X55 Y175 F20000 ; find a soft place to home\nG28 Z P0 T300; home z with low precision, permit 300deg temperature\nG29.2 S0 ; turn off ABL\n\nG1 Z10\nG1 X85 Y185\nG1 Z-1.01\nG1 X95\nG1 X90\n\nM211 R; pop softend status\n\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== wait heatbed ====================\nM1002 gcode_claim_action : 2\nM104 S0\nM190 S[bed_temperature_initial_layer_single];set bed temp\nM109 S140\n\nG1 Z5 F3000\nG29.2 S1\nG1 X10 Y10 F20000\n\n;===== bed leveling ==================================\n;M1002 set_flag g29_before_print_flag=1\nM1002 judge_flag g29_before_print_flag\nM622 J1\n M1002 gcode_claim_action : 1\n G29 A1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28 T145\n\nM623\n\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\n\nG1 X-13.5 Y0 Z10 F10000\nG1 E1.2 F500\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S{nozzle_temperature[initial_extruder]}\nM400\n\nM412 S1 ; ===turn on filament runout detection===\nM400 P10\n\nG392 S0 ;turn on clog detect\n\nM620.3 W1; === turn on filament tangle detection===\nM400 S2\n\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n;M1002 set_flag extrude_cali_flag=1\nM1002 judge_flag extrude_cali_flag\nM622 J1\n M1002 gcode_claim_action : 8\n \n M400\n M900 K0.0 L1000.0 M1.0\n G90\n M83\n G0 X68 Y-4 F30000\n G0 Z0.3 F18000 ;Move to start position\n M400\n G0 X88 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\n G0 X93 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X98 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X103 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X108 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X113 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 Y0 Z0 F20000\n M400\n \n G1 X-13.5 Y0 Z10 F10000\n M400\n \n G1 E10 F{outer_wall_volumetric_speed/2.4*60}\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X-13.5 F3000\n M400\n M106 P1 S0\n\n M1002 judge_last_extrude_cali_success\n M622 J0\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n M400\n M106 P1 S0\n M623\n \n G1 X-13.5 F3000\n M400\n M984 A0.1 E1 S1 F{outer_wall_volumetric_speed/2.4} H[nozzle_diameter]\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X-13.5 F3000\n M400\n M106 P1 S0\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n;===== extrude cali test ===============================\nM104 S{nozzle_temperature_initial_layer[initial_extruder]}\nG90\nM83\nG0 X68 Y-2.5 F30000\nG0 Z0.3 F18000 ;Move to start position\nG0 X88 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X93 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X98 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X103 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X108 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X113 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X115 Z0 F20000\nG0 Z5\nM400\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\n\nM400 ; wait all motion done before implement the emprical L parameters\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.02} ; for Textured PEI Plate\n{endif}\n\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n\nM211 X0 Y0 Z0 ;turn off soft endstop\nM1007 S1\n\n\n\n", "machine_end_gcode": ";===== date: 20231229 =====================\n;turn off nozzle clog detect\nG392 S0\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\n{if !spiral_mode && print_sequence != \"by object\"}\nM1002 judge_flag timelapse_record_flag\nM622 J1\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM991 S0 P-1 ;end timelapse at safe pos\nM623\n{endif}\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n;G1 X27 F15000 ; wipe\n\n; pull back filament to AMS\nM620 S255\nG1 X181 F12000\nT255\nG1 X0 F18000\nG1 X-13.0 F3000\nG1 X0 F18000 ; wipe\nM621 S255\n\nM104 S0 ; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 180}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z180 F600\n G1 Z180\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X-13 Y180 F3600\n\nG91\nG1 Z-1 F600\nG90\nM83\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M100 E42 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C46 D10 M100 E46 F10 N100\nM1006 A44 B20 L100 C39 D20 M100 E48 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E48 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B20 L100 C41 D20 M100 E49 F20 N100\nM1006 A0 B20 L100 C0 D20 M100 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M100 E37 F20 N100\nM1006 W\n;=====printer finish sound=========\nM400 S1\nM18 X Y Z\n", "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n", "time_lapse_gcode": ";===================== date: 20240606 =====================\n{if !spiral_mode && print_sequence != \"by object\"}\n; don't support timelapse gcode in spiral_mode and by object sequence for I3 structure printer\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\nG92 E0\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Z{max_layer_z + 0.4}\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 X0 F18000\nM623\n\nM622.1 S1\nM1002 judge_flag g39_3rd_layer_detect_flag\nM622 J1\n ; enable nozzle clog detect at 3rd layer\n {if layer_num == 2}\n M400\n G90\n M83\n M204 S5000\n G0 Z2 F4000\n G0 X187 Y178 F20000\n G39 S1 X187 Y178\n G0 Z2 F4000\n {endif}\n\n\n M622.1 S1\n M1002 judge_flag g39_detection_flag\n M622 J1\n {if !in_head_wrap_detect_zone}\n M622.1 S0\n M1002 judge_flag g39_mass_exceed_flag\n M622 J1\n {if layer_num > 2}\n G392 S0\n M400\n G90\n M83\n M204 S5000\n G0 Z{max_layer_z + 0.4} F4000\n G39.3 S1\n G0 Z{max_layer_z + 0.4} F4000\n G392 S0\n {endif}\n M623\n {endif}\n M623\nM623\n{endif}\n\n\n", - "change_filament_gcode": ";===== machine: A1 mini =========================\n;===== date: 20240618 =======================\nG392 S0\nM1007 S0\nM620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1}\nG17\nG2 Z{max_layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n\nG1 X180 F18000\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nM620.10 A0 F[old_filament_e_feedrate]\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\nM620.10 A1 F[new_filament_e_feedrate] L[flush_length] H[nozzle_diameter] T[nozzle_temperature_range_high]\n\nG1 Y90 F9000\n\n{if next_extruder < 255}\nM400\n\nG92 E0\nM628 S0\n\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S[nozzle_temperature_range_high]\nM106 P1 S60\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\nM400\nM1002 set_filament_type:{filament_type[next_extruder]}\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\nM629\n\nM400\nM106 P1 S60\nM109 S[new_filament_temp]\nG1 E5 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM106 P1 S0\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n\n\nM622.1 S0\n\nM9833 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\nM1002 judge_flag filament_need_cali_flag\nM622 J1\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n M400\n M106 P1 S0 \nM623\n\nG392 S0\nM1007 S1\n\n" -} \ No newline at end of file + "change_filament_gcode": ";===== machine: A1 mini =========================\n;===== date: 20240830 =======================\nG392 S0\nM1007 S0\nM620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1}\nG17\nG2 Z{max_layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n\nG1 X180 F18000\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nM620.10 A0 F[old_filament_e_feedrate]\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\nM620.10 A1 F[new_filament_e_feedrate] L[flush_length] H[nozzle_diameter] T[nozzle_temperature_range_high]\n\nG1 Y90 F9000\n\n{if next_extruder < 255}\nM400\n\nG92 E0\nM628 S0\n\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S[nozzle_temperature_range_high]\nM106 P1 S60\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\nM400\nM1002 set_filament_type:{filament_type[next_extruder]}\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\nM629\n\nM400\nM106 P1 S60\nM109 S[new_filament_temp]\nG1 E5 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM106 P1 S0\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n\n\nM622.1 S0\n\nM9833 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\nM1002 judge_flag filament_need_cali_flag\nM622 J1\n G92 E0\n G1 E-[new_retract_length_toolchange] F1800\n M400\n \n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n M400\n M106 P1 S0 \nM623\n\nG392 S0\nM1007 S1\n\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini.json index 31896bebf5d..26ba6994c7b 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 mini.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini.json @@ -2,12 +2,12 @@ "type": "machine_model", "name": "Bambu Lab A1 mini", "nozzle_diameter": "0.4;0.2;0.6;0.8", + "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", "bed_model": "bbl-3dp-A1M.stl", "bed_texture": "bbl-3dp-logo.svg", "default_bed_type": "Textured PEI Plate", "family": "BBL-3DP", "machine_tech": "FFF", "model_id": "N1", - "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", - "default_materials": "Bambu PLA Matte @BBL A1M;Bambu PLA Basic @BBL A1M;Bambu PLA Silk @BBL A1M;Bambu Support For PLA @BBL A1M;Bambu PETG Basic @BBL A1M 0.4 nozzle;Bambu TPU 95A @BBL A1M;Generic PLA @BBL A1M;Generic PLA High Speed @BBL A1M;Bambu PLA Metal @BBL A1M;Generic PETG @BBL A1M;Bambu PLA Marble @BBL A1M;Bambu PLA-CF @BBL A1M;Bambu PETG-CF @BBL A1M" + "default_materials": "Bambu PLA Matte @BBL A1M;Bambu PLA Basic @BBL A1M;Bambu PLA Silk @BBL A1M;Bambu Support For PLA @BBL A1M;Bambu TPU 95A @BBL A1M;Generic PLA @BBL A1M;Generic PLA High Speed @BBL A1M;Bambu PLA Metal @BBL A1M;Generic PETG @BBL A1M;Bambu PLA Marble @BBL A1M;Bambu PLA-CF @BBL A1M;Bambu PETG-CF @BBL A1M;Bambu PETG HF @BBL A1M" } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.06mm High Quality @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm High Quality @BBL A1 0.2 nozzle.json index fe4a28ca202..19c218e4e38 100644 --- a/resources/profiles/BBL/process/0.06mm High Quality @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm High Quality @BBL A1 0.2 nozzle.json @@ -12,7 +12,7 @@ "initial_layer_speed": "16", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/process/0.06mm High Quality @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm High Quality @BBL A1M 0.2 nozzle.json index 6faf0c59947..15f97d190e6 100644 --- a/resources/profiles/BBL/process/0.06mm High Quality @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm High Quality @BBL A1M 0.2 nozzle.json @@ -11,7 +11,7 @@ "initial_layer_speed": "16", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/process/0.06mm High Quality @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm High Quality @BBL P1P 0.2 nozzle.json index 5f501034b53..da1f6a89c34 100644 --- a/resources/profiles/BBL/process/0.06mm High Quality @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm High Quality @BBL P1P 0.2 nozzle.json @@ -10,7 +10,7 @@ "elefant_foot_compensation": "0.15", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" ] diff --git a/resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json index 3b06a8db087..56388c0b15a 100644 --- a/resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json @@ -10,7 +10,9 @@ "elefant_foot_compensation": "0.15", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", diff --git a/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json index 5ffde15e918..15ac55524b1 100644 --- a/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json @@ -7,6 +7,8 @@ "instantiation": "true", "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.", "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json index ddb385860ca..22ed2d79544 100644 --- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json @@ -6,6 +6,8 @@ "setting_id": "GP001", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1 0.2 nozzle.json index 6f6bcb9366b..77459773872 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1 0.2 nozzle.json @@ -12,7 +12,7 @@ "initial_layer_speed": "16", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1.json index 0e81a4944c8..7d7f7be4570 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1.json @@ -13,7 +13,7 @@ "internal_solid_infill_speed": "150", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "150", "top_surface_speed": "150", "travel_speed": "700", diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M 0.2 nozzle.json index 94e8922f4a4..2d181eae1b3 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M 0.2 nozzle.json @@ -11,7 +11,7 @@ "initial_layer_speed": "16", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M.json index 5726784144b..71e2f43b7d6 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M.json @@ -13,7 +13,7 @@ "internal_solid_infill_speed": "150", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "150", "top_surface_speed": "150", "travel_speed": "700", diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P 0.2 nozzle.json index a20f5b62b83..6424eae3c07 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P 0.2 nozzle.json @@ -10,7 +10,7 @@ "elefant_foot_compensation": "0.15", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" ] diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P.json index 09a573a2c3b..f135573cf2b 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P.json @@ -13,7 +13,7 @@ "internal_solid_infill_speed": "150", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "150", "top_surface_speed": "150", "compatible_printers": [ diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json index ebdca7e8b78..dc0de89bc68 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json @@ -10,7 +10,9 @@ "elefant_foot_compensation": "0.15", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json index 6772c21195e..778b1b9bef1 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json @@ -12,9 +12,11 @@ "internal_solid_infill_speed": "150", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "150", "top_surface_speed": "150", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json index 4d1c9fa00e0..905fef5e097 100644 --- a/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json @@ -7,6 +7,8 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.", "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", diff --git a/resources/profiles/BBL/process/0.10mm High Quality @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm High Quality @BBL A1 0.2 nozzle.json index 330d2650a7c..23393e37b97 100644 --- a/resources/profiles/BBL/process/0.10mm High Quality @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm High Quality @BBL A1 0.2 nozzle.json @@ -12,7 +12,7 @@ "initial_layer_speed": "16", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/process/0.10mm High Quality @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm High Quality @BBL A1M 0.2 nozzle.json index 8d56afe4a1d..cb96b785afe 100644 --- a/resources/profiles/BBL/process/0.10mm High Quality @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm High Quality @BBL A1M 0.2 nozzle.json @@ -12,7 +12,7 @@ "initial_layer_speed": "16", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/process/0.10mm High Quality @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm High Quality @BBL P1P 0.2 nozzle.json index eff310601dd..f463a9e0601 100644 --- a/resources/profiles/BBL/process/0.10mm High Quality @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm High Quality @BBL P1P 0.2 nozzle.json @@ -10,7 +10,7 @@ "elefant_foot_compensation": "0.15", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" ] diff --git a/resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json index 9e065b37e62..b1ab2d897b2 100644 --- a/resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json @@ -10,7 +10,9 @@ "elefant_foot_compensation": "0.15", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json index 241c0a358f1..64f47b93a5a 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json @@ -7,6 +7,8 @@ "instantiation": "true", "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json b/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json index d42c4dcd663..b51e89eb5b1 100644 --- a/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json +++ b/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json @@ -6,6 +6,8 @@ "setting_id": "GP002", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL A1.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL A1.json index 6123087146d..0a1a283141d 100644 --- a/resources/profiles/BBL/process/0.12mm High Quality @BBL A1.json +++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL A1.json @@ -13,7 +13,7 @@ "internal_solid_infill_speed": "180", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "180", "top_surface_speed": "150", "travel_speed": "700", diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL A1M.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL A1M.json index 89965671393..dbe1743fbcc 100644 --- a/resources/profiles/BBL/process/0.12mm High Quality @BBL A1M.json +++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL A1M.json @@ -13,7 +13,7 @@ "internal_solid_infill_speed": "180", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "180", "top_surface_speed": "150", "travel_speed": "700", diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL P1P.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL P1P.json index 4585e256728..1acd431c126 100644 --- a/resources/profiles/BBL/process/0.12mm High Quality @BBL P1P.json +++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL P1P.json @@ -12,7 +12,7 @@ "internal_solid_infill_speed": "180", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "180", "top_surface_speed": "150", "compatible_printers": [ diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json index 7c8599fc9aa..d49e9314854 100644 --- a/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json +++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json @@ -12,9 +12,11 @@ "internal_solid_infill_speed": "180", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "180", "top_surface_speed": "150", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json index e9090173196..703993972e0 100644 --- a/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json @@ -7,6 +7,8 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.", "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", diff --git a/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json index b6d8ecc230b..be951de13bf 100644 --- a/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json @@ -7,6 +7,8 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.", "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL A1.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL A1.json index 59cd4239de2..5632bdbe262 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL A1.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL A1.json @@ -13,7 +13,7 @@ "internal_solid_infill_speed": "200", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "200", "top_surface_speed": "150", "travel_speed": "700", diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL A1M.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL A1M.json index b81470853fb..fe51c4740f3 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL A1M.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL A1M.json @@ -13,7 +13,7 @@ "internal_solid_infill_speed": "200", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "200", "top_surface_speed": "150", "travel_speed": "700", diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL P1P.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL P1P.json index aa06dca1de4..a3cd2eb87cf 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL P1P.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL P1P.json @@ -12,7 +12,7 @@ "internal_solid_infill_speed": "200", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "200", "top_surface_speed": "150", "compatible_printers": [ diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json index 316fca99564..2e8fb3e44a2 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json @@ -12,9 +12,11 @@ "internal_solid_infill_speed": "200", "outer_wall_acceleration": "2000", "outer_wall_speed": "60", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "200", "top_surface_speed": "150", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json index 0d12d4ddb84..5dc996d120f 100644 --- a/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json +++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json @@ -6,6 +6,8 @@ "setting_id": "GP003", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json index 15ebedb2ac1..6395e965b00 100644 --- a/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json @@ -7,6 +7,8 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 0.6 nozzle", diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json index 2f38b67fa79..01133f83ec9 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json @@ -6,6 +6,8 @@ "setting_id": "GP004", "instantiation": "true", "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json index a6213763003..6635305debd 100644 --- a/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json +++ b/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json @@ -8,6 +8,8 @@ "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", "outer_wall_speed": "60", "sparse_infill_density": "25%", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "wall_loops": "6", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json b/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json index 01505bf228f..cc2806ac9fc 100644 --- a/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json +++ b/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json @@ -6,6 +6,8 @@ "setting_id": "GP005", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json index 992bb0f1c5d..2675aaa3739 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json @@ -7,6 +7,8 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 0.6 nozzle", diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json index 9be5eed9887..9ff95902a77 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json @@ -7,6 +7,8 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1 0.8 nozzle", diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json index 8c2e794dab3..4d544e0f97a 100644 --- a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json +++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json @@ -6,6 +6,8 @@ "setting_id": "GP006", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json index 3f0a4dacbe5..7a629102571 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json @@ -7,6 +7,8 @@ "instantiation": "true", "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab P1S 0.6 nozzle", diff --git a/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json index affc545389c..7d39dcfa0c7 100644 --- a/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json @@ -9,6 +9,8 @@ "elefant_foot_compensation": "0.15", "sparse_infill_density": "25%", "wall_loops": "4", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 0.6 nozzle", diff --git a/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json index a75637780fe..148b39055b5 100644 --- a/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json @@ -7,6 +7,8 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1 0.8 nozzle", diff --git a/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json index f259218f18d..d09c89ecb7c 100644 --- a/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json @@ -7,6 +7,8 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 0.6 nozzle", diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json index 2c7cb9ba80c..15ba67645d6 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json @@ -7,6 +7,8 @@ "instantiation": "true", "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.8 nozzle", diff --git a/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json index dbf82551058..1005112ff6d 100644 --- a/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json @@ -7,6 +7,8 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 0.6 nozzle", diff --git a/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json index 77c25859433..40c694d8914 100644 --- a/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json @@ -7,6 +7,8 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1 0.8 nozzle", diff --git a/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json index 64d3187b44e..9b80a1a5dda 100644 --- a/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json @@ -7,6 +7,8 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", "compatible_printers": [ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1 0.8 nozzle", diff --git a/resources/profiles/BBL/process/fdm_process_common.json b/resources/profiles/BBL/process/fdm_process_common.json index fd909fd1c7e..c68411dbbe1 100644 --- a/resources/profiles/BBL/process/fdm_process_common.json +++ b/resources/profiles/BBL/process/fdm_process_common.json @@ -17,7 +17,7 @@ "line_width": "0.45", "infill_direction": "45", "sparse_infill_density": "15%", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "grid", "initial_layer_line_width": "0.42", "initial_layer_print_height": "0.2", "initial_layer_speed": "20", @@ -67,5 +67,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "compatible_printers": [] + "compatible_printers": [], + "smooth_coefficient": "80", + "overhang_totally_speed": "24" } \ No newline at end of file