From 3d0329355400e80ed46097643773a8a4a22c42f6 Mon Sep 17 00:00:00 2001
From: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Date: Tue, 3 Nov 2020 17:38:01 +0100
Subject: [PATCH] creality.ini: add Velleman PLA filament

print temperature based on a temperature tower test

going lower than 200C doesn't seem to give many benefits
going higher than 200C seems to produce slightly worse
overhangs, which becomes particularly noticeable at 215C

There is no reference pricing from the Belgian vendor,
however 20,99 per 0.75KG roll seems common
---
 resources/profiles/Creality.ini | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/resources/profiles/Creality.ini b/resources/profiles/Creality.ini
index 3f789334266..c45c71db236 100644
--- a/resources/profiles/Creality.ini
+++ b/resources/profiles/Creality.ini
@@ -489,6 +489,16 @@ first_layer_bed_temperature = 60
 filament_cost = 24.99
 filament_density = 1.24
 
+[filament:Velleman PLA @CREALITY]
+inherits = *PLA*
+filament_vendor = Velleman
+temperature = 200
+bed_temperature = 60
+first_layer_temperature = 205
+first_layer_bed_temperature = 60
+filament_cost = 27.99
+filament_density = 1.24
+
 # Common printer preset
 [printer:*common*]
 printer_technology = FFF