From 52e4d2af82133dc4514d2916064237b34d2e1d48 Mon Sep 17 00:00:00 2001 From: Bernhard Koppensteiner <36260775+koppensb@users.noreply.github.com> Date: Sun, 15 Jun 2025 13:44:39 +0200 Subject: [PATCH] High Flow Profiles for MINIIS; minor Profile Tweaks for MK3.5 and MINIIS (#9485) * bugfix for TPU filament overrides * higher voluemetric flow * bugfix for to high speed at internal solid infill * Update Prusa.json * updated firmware check and nozzle settings * bugfix speed and standard for 0,15mm profiles of the 0.4mm nozzle * variables not defined in orcaslicer * bug fix volumetric speed, wrong value * added high flow base process * added highflow base process * added first full draft of high flow profiles, further tests are necessary * changed 0.35mm to 0.32mm for 0.6mm nozzle * minor changes to initial layer speeds * changed 0.35mm to 0.32mm for 0.6mm nozzle * furcer changes on accelartion and speed * added 0.35mm Standard @MK3.5 again for not breaking anythin for current users * Update 0.35mm Standard @MK3.5.json forgot to set the layer_height after creation of the 0.35mm profile * minor fixes in filament overrides * added profiles for high flow nozzles on the Prusa MINIIS * added fan_speedup_time for MINIIS and MK3.5 * changes to support interface, pattern and distance --------- Co-authored-by: Noisyfox --- resources/profiles/Prusa.json | 108 ++++++++++++++++++ .../Prusa Generic ABS @MINIIS 0.25.json | 6 + .../Prusa Generic ABS @MINIIS 0.6.json | 6 + .../Prusa Generic ABS @MINIIS 0.8.json | 6 + .../filament/Prusa Generic ABS @MINIIS.json | 6 + .../Prusa Generic ABS HF @MINIIS 0.6.json | 57 +++++++++ .../Prusa Generic ABS HF @MINIIS 0.8.json | 57 +++++++++ .../Prusa Generic ABS HF @MINIIS.json | 57 +++++++++ .../Prusa Generic ASA @MINIIS 0.25.json | 3 + .../Prusa Generic ASA @MINIIS 0.6.json | 3 + .../Prusa Generic ASA @MINIIS 0.8.json | 3 + .../filament/Prusa Generic ASA @MINIIS.json | 3 + .../Prusa Generic ASA HF @MINIIS 0.6.json | 54 +++++++++ .../Prusa Generic ASA HF @MINIIS 0.8.json | 55 +++++++++ .../Prusa Generic ASA HF @MINIIS.json | 54 +++++++++ .../Prusa Generic PC HF @MINIIS 0.6.json | 24 ++++ .../Prusa Generic PC HF @MINIIS 0.8.json | 24 ++++ .../filament/Prusa Generic PC HF @MINIIS.json | 24 ++++ .../Prusa Generic PETG @MINIIS 0.25.json | 9 ++ .../Prusa Generic PETG @MINIIS 0.6.json | 9 ++ .../Prusa Generic PETG @MINIIS 0.8.json | 9 ++ .../filament/Prusa Generic PETG @MINIIS.json | 9 ++ .../Prusa Generic PETG HF @MINIIS 0.6.json | 72 ++++++++++++ .../Prusa Generic PETG HF @MINIIS 0.8.json | 72 ++++++++++++ .../Prusa Generic PETG HF @MINIIS.json | 72 ++++++++++++ .../Prusa Generic PLA HF @MINIIS 0.6.json | 28 +++++ .../Prusa Generic PLA HF @MINIIS 0.8.json | 28 +++++ .../Prusa Generic PLA HF @MINIIS.json | 27 +++++ .../Prusa Generic PVA HF @MINIIS 0.6.json | 30 +++++ .../Prusa Generic PVA HF @MINIIS 0.8.json | 30 +++++ .../Prusa Generic PVA HF @MINIIS.json | 29 +++++ .../Prusa Generic TPU HF @MINIIS.json | 91 +++++++++++++++ .../machine/Prusa MINIIS 0.4 nozzle.json | 3 + .../Prusa/machine/Prusa MK3.5 0.4 nozzle.json | 3 + .../Prusa/process/0.05mm Detail @MK3.5.json | 1 + .../Prusa/process/0.07mm Detail @MINIIS.json | 1 + .../Prusa/process/0.07mm Detail @MK3.5.json | 1 + .../Prusa/process/0.10mm Speed @MINIIS.json | 1 + .../Prusa/process/0.10mm Speed @MK3.5.json | 1 + .../Prusa/process/0.12mm Speed @MINIIS.json | 1 + .../Prusa/process/0.12mm Speed @MK3.5.json | 1 + .../process/0.12mm Standard @MINIIS.json | 1 + .../Prusa/process/0.12mm Standard @MK3.5.json | 1 + .../process/0.15mm High Flow @MINIIS.json | 36 ++++++ .../process/0.15mm High Flow @MK3.5.json | 1 + .../process/0.15mm Speed @MINIIS 0.25.json | 1 + .../Prusa/process/0.15mm Speed @MINIIS.json | 1 + .../process/0.15mm Speed @MK3.5 0.25.json | 1 + .../Prusa/process/0.15mm Speed @MK3.5.json | 1 + .../process/0.15mm Standard @MINIIS 0.25.json | 1 + .../process/0.15mm Standard @MINIIS 0.6.json | 1 + .../process/0.15mm Standard @MINIIS.json | 1 + .../process/0.15mm Standard @MK3.5 0.25.json | 1 + .../process/0.15mm Standard @MK3.5 0.6.json | 1 + .../Prusa/process/0.15mm Standard @MK3.5.json | 1 + .../process/0.20mm High Flow @MINIIS 0.6.json | 40 +++++++ .../process/0.20mm High Flow @MINIIS.json | 19 +++ .../process/0.25mm High Flow @MINIIS.json | 47 ++++++++ .../process/0.25mm High Flow @MK3.5.json | 1 + .../Prusa/process/0.25mm Speed @MINIIS.json | 1 + .../Prusa/process/0.25mm Speed @MK3.5.json | 1 + .../process/0.25mm Standard @MINIIS.json | 1 + .../Prusa/process/0.25mm Standard @MK3.5.json | 1 + .../Prusa/process/0.30mm Detail @MINIIS.json | 1 + .../Prusa/process/0.30mm Detail @MK3.5.json | 1 + .../process/0.32mm High Flow @MINIIS.json | 44 +++++++ .../process/0.32mm High Flow @MK3.5.json | 1 + .../process/0.32mm Standard @MINIIS.json | 37 ++++++ .../Prusa/process/0.32mm Standard @MK3.5.json | 1 + .../process/0.35mm Standard @MINIIS.json | 1 + .../Prusa/process/0.35mm Standard @MK3.5.json | 1 + .../process/0.40mm High Flow @MINIIS.json | 48 ++++++++ .../process/0.40mm High Flow @MK3.5.json | 1 + .../process/0.40mm Standard @MINIIS.json | 1 + .../Prusa/process/0.40mm Standard @MK3.5.json | 1 + .../Prusa/process/process_common_MK3.5.json | 11 +- .../Prusa/process/process_common_miniis.json | 11 +- .../process/process_highflow_miniis.json | 24 ++++ 78 files changed, 1420 insertions(+), 2 deletions(-) create mode 100644 resources/profiles/Prusa/filament/Prusa Generic ABS HF @MINIIS 0.6.json create mode 100644 resources/profiles/Prusa/filament/Prusa Generic ABS HF @MINIIS 0.8.json create mode 100644 resources/profiles/Prusa/filament/Prusa Generic ABS HF @MINIIS.json create mode 100644 resources/profiles/Prusa/filament/Prusa Generic ASA HF @MINIIS 0.6.json create mode 100644 resources/profiles/Prusa/filament/Prusa Generic ASA HF @MINIIS 0.8.json create mode 100644 resources/profiles/Prusa/filament/Prusa Generic ASA HF @MINIIS.json create mode 100644 resources/profiles/Prusa/filament/Prusa Generic PC HF @MINIIS 0.6.json create mode 100644 resources/profiles/Prusa/filament/Prusa Generic PC HF @MINIIS 0.8.json create mode 100644 resources/profiles/Prusa/filament/Prusa Generic PC HF @MINIIS.json create mode 100644 resources/profiles/Prusa/filament/Prusa Generic PETG HF @MINIIS 0.6.json create mode 100644 resources/profiles/Prusa/filament/Prusa Generic PETG HF @MINIIS 0.8.json create mode 100644 resources/profiles/Prusa/filament/Prusa Generic PETG HF @MINIIS.json create mode 100644 resources/profiles/Prusa/filament/Prusa Generic PLA HF @MINIIS 0.6.json create mode 100644 resources/profiles/Prusa/filament/Prusa Generic PLA HF @MINIIS 0.8.json create mode 100644 resources/profiles/Prusa/filament/Prusa Generic PLA HF @MINIIS.json create mode 100644 resources/profiles/Prusa/filament/Prusa Generic PVA HF @MINIIS 0.6.json create mode 100644 resources/profiles/Prusa/filament/Prusa Generic PVA HF @MINIIS 0.8.json create mode 100644 resources/profiles/Prusa/filament/Prusa Generic PVA HF @MINIIS.json create mode 100644 resources/profiles/Prusa/filament/Prusa Generic TPU HF @MINIIS.json create mode 100644 resources/profiles/Prusa/process/0.15mm High Flow @MINIIS.json create mode 100644 resources/profiles/Prusa/process/0.20mm High Flow @MINIIS 0.6.json create mode 100644 resources/profiles/Prusa/process/0.20mm High Flow @MINIIS.json create mode 100644 resources/profiles/Prusa/process/0.25mm High Flow @MINIIS.json create mode 100644 resources/profiles/Prusa/process/0.32mm High Flow @MINIIS.json create mode 100644 resources/profiles/Prusa/process/0.32mm Standard @MINIIS.json create mode 100644 resources/profiles/Prusa/process/0.40mm High Flow @MINIIS.json create mode 100644 resources/profiles/Prusa/process/process_highflow_miniis.json diff --git a/resources/profiles/Prusa.json b/resources/profiles/Prusa.json index 2aafc405919..a03caa1d1cc 100644 --- a/resources/profiles/Prusa.json +++ b/resources/profiles/Prusa.json @@ -66,6 +66,10 @@ "name": "process_speed_miniis", "sub_path": "process/process_speed_miniis.json" }, + { + "name": "process_highflow_miniis", + "sub_path": "process/process_highflow_miniis.json" + }, { "name": "process_detail_miniis", "sub_path": "process/process_detail_miniis.json" @@ -266,6 +270,10 @@ "name": "0.30mm Detail @MINIIS", "sub_path": "process/0.30mm Detail @MINIIS.json" }, + { + "name": "0.32mm Standard @MINIIS", + "sub_path": "process/0.32mm Standard @MINIIS.json" + }, { "name": "0.35mm Standard @MINIIS", "sub_path": "process/0.35mm Standard @MINIIS.json" @@ -274,6 +282,30 @@ "name": "0.40mm Standard @MINIIS", "sub_path": "process/0.40mm Standard @MINIIS.json" }, + { + "name": "0.15mm High Flow @MINIIS", + "sub_path": "process/0.15mm High Flow @MINIIS.json" + }, + { + "name": "0.20mm High Flow @MINIIS 0.6", + "sub_path": "process/0.20mm High Flow @MINIIS 0.6.json" + }, + { + "name": "0.20mm High Flow @MINIIS", + "sub_path": "process/0.20mm High Flow @MINIIS.json" + }, + { + "name": "0.25mm High Flow @MINIIS", + "sub_path": "process/0.25mm High Flow @MINIIS.json" + }, + { + "name": "0.32mm High Flow @MINIIS", + "sub_path": "process/0.32mm High Flow @MINIIS.json" + }, + { + "name": "0.40mm High Flow @MINIIS", + "sub_path": "process/0.40mm High Flow @MINIIS.json" + }, { "name": "process_common_MK3.5", "sub_path": "process/process_common_MK3.5.json" @@ -1356,6 +1388,82 @@ "name": "Prusa Generic PA @MINIIS 0.8", "sub_path": "filament/Prusa Generic PA @MINIIS 0.8.json" }, + { + "name": "Prusa Generic PLA HF @MINIIS 0.6", + "sub_path": "filament/Prusa Generic PLA HF @MINIIS 0.6.json" + }, + { + "name": "Prusa Generic PLA HF @MINIIS 0.8", + "sub_path": "filament/Prusa Generic PLA HF @MINIIS 0.8.json" + }, + { + "name": "Prusa Generic PLA HF @MINIIS", + "sub_path": "filament/Prusa Generic PLA HF @MINIIS.json" + }, + { + "name": "Prusa Generic PETG HF @MINIIS", + "sub_path": "filament/Prusa Generic PETG HF @MINIIS.json" + }, + { + "name": "Prusa Generic PETG HF @MINIIS 0.6", + "sub_path": "filament/Prusa Generic PETG HF @MINIIS 0.6.json" + }, + { + "name": "Prusa Generic PETG HF @MINIIS 0.8", + "sub_path": "filament/Prusa Generic PETG HF @MINIIS 0.8.json" + }, + { + "name": "Prusa Generic ABS HF @MINIIS", + "sub_path": "filament/Prusa Generic ABS HF @MINIIS.json" + }, + { + "name": "Prusa Generic ABS HF @MINIIS 0.6", + "sub_path": "filament/Prusa Generic ABS HF @MINIIS 0.6.json" + }, + { + "name": "Prusa Generic ABS HF @MINIIS 0.8", + "sub_path": "filament/Prusa Generic ABS HF @MINIIS 0.8.json" + }, + { + "name": "Prusa Generic TPU HF @MINIIS", + "sub_path": "filament/Prusa Generic TPU HF @MINIIS.json" + }, + { + "name": "Prusa Generic ASA HF @MINIIS", + "sub_path": "filament/Prusa Generic ASA HF @MINIIS.json" + }, + { + "name": "Prusa Generic ASA HF @MINIIS 0.6", + "sub_path": "filament/Prusa Generic ASA HF @MINIIS 0.6.json" + }, + { + "name": "Prusa Generic ASA HF @MINIIS 0.8", + "sub_path": "filament/Prusa Generic ASA HF @MINIIS 0.8.json" + }, + { + "name": "Prusa Generic PC HF @MINIIS", + "sub_path": "filament/Prusa Generic PC HF @MINIIS.json" + }, + { + "name": "Prusa Generic PC HF @MINIIS 0.6", + "sub_path": "filament/Prusa Generic PC HF @MINIIS 0.6.json" + }, + { + "name": "Prusa Generic PC HF @MINIIS 0.8", + "sub_path": "filament/Prusa Generic PC HF @MINIIS 0.8.json" + }, + { + "name": "Prusa Generic PVA HF @MINIIS", + "sub_path": "filament/Prusa Generic PVA HF @MINIIS.json" + }, + { + "name": "Prusa Generic PVA HF @MINIIS 0.6", + "sub_path": "filament/Prusa Generic PVA HF @MINIIS 0.6.json" + }, + { + "name": "Prusa Generic PVA HF @MINIIS 0.8", + "sub_path": "filament/Prusa Generic PVA HF @MINIIS 0.8.json" + }, { "name": "Prusa Generic PA-CF", "sub_path": "filament/Prusa Generic PA-CF.json" diff --git a/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS 0.25.json b/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS 0.25.json index b4d82f7794c..bb3a5ad3fc9 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS 0.25.json +++ b/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS 0.25.json @@ -44,6 +44,12 @@ "pressure_advance": [ "0.55" ], + "filament_retraction_length": [ + "2.7" + ], + "filament_retraction_minimum_travel": [ + "3" + ], "compatible_printers": [ "Prusa MINIIS 0.25 nozzle" diff --git a/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS 0.6.json b/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS 0.6.json index 1a76559cbdc..fd7a6253fd2 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS 0.6.json +++ b/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS 0.6.json @@ -44,6 +44,12 @@ "pressure_advance": [ "0.1" ], + "filament_retraction_length": [ + "2.7" + ], + "filament_retraction_minimum_travel": [ + "3" + ], "compatible_printers": [ "Prusa MINIIS 0.6 nozzle" diff --git a/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS 0.8.json b/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS 0.8.json index 1668805ca43..f789dfa96f7 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS 0.8.json +++ b/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS 0.8.json @@ -44,6 +44,12 @@ "pressure_advance": [ "0.07" ], + "filament_retraction_length": [ + "2.7" + ], + "filament_retraction_minimum_travel": [ + "3" + ], "compatible_printers": [ "Prusa MINIIS 0.8 nozzle" diff --git a/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS.json b/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS.json index 97779cd277f..12c87084263 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS.json +++ b/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS.json @@ -44,6 +44,12 @@ "pressure_advance": [ "0.19" ], + "filament_retraction_length": [ + "2.7" + ], + "filament_retraction_minimum_travel": [ + "3" + ], "compatible_printers": [ "Prusa MINIIS 0.4 nozzle" diff --git a/resources/profiles/Prusa/filament/Prusa Generic ABS HF @MINIIS 0.6.json b/resources/profiles/Prusa/filament/Prusa Generic ABS HF @MINIIS 0.6.json new file mode 100644 index 00000000000..bd69273a70f --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic ABS HF @MINIIS 0.6.json @@ -0,0 +1,57 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic ABS HF @MINIIS 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_abs", + "filament_flow_ratio": [ + "1" + ], + "cool_plate_temp" : [ + "100" + ], + "eng_plate_temp" : [ + "100" + ], + "hot_plate_temp" : [ + "100" + ], + "cool_plate_temp_initial_layer" : [ + "100" + ], + "eng_plate_temp_initial_layer" : [ + "100" + ], + "hot_plate_temp_initial_layer" : [ + "100" + ], + "filament_max_volumetric_speed": [ + "30" + ], + "fan_max_speed": [ + "15" + ], + "fan_min_speed": [ + "15" + ], + "slow_down_layer_time": [ + "20" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.1" + ], + "filament_retraction_length": [ + "2.7" + ], + "filament_retraction_minimum_travel": [ + "3" + ], + + "compatible_printers": [ + "Prusa MINIIS 0.6 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic ABS HF @MINIIS 0.8.json b/resources/profiles/Prusa/filament/Prusa Generic ABS HF @MINIIS 0.8.json new file mode 100644 index 00000000000..aa2a3c93fb6 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic ABS HF @MINIIS 0.8.json @@ -0,0 +1,57 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic ABS HF @MINIIS 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_abs", + "filament_flow_ratio": [ + "1" + ], + "cool_plate_temp" : [ + "100" + ], + "eng_plate_temp" : [ + "100" + ], + "hot_plate_temp" : [ + "100" + ], + "cool_plate_temp_initial_layer" : [ + "100" + ], + "eng_plate_temp_initial_layer" : [ + "100" + ], + "hot_plate_temp_initial_layer" : [ + "100" + ], + "filament_max_volumetric_speed": [ + "36" + ], + "fan_max_speed": [ + "15" + ], + "fan_min_speed": [ + "15" + ], + "slow_down_layer_time": [ + "20" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.07" + ], + "filament_retraction_length": [ + "2.7" + ], + "filament_retraction_minimum_travel": [ + "3" + ], + + "compatible_printers": [ + "Prusa MINIIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic ABS HF @MINIIS.json b/resources/profiles/Prusa/filament/Prusa Generic ABS HF @MINIIS.json new file mode 100644 index 00000000000..50bdddd0754 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic ABS HF @MINIIS.json @@ -0,0 +1,57 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic ABS HF @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_abs", + "filament_flow_ratio": [ + "1" + ], + "cool_plate_temp" : [ + "100" + ], + "eng_plate_temp" : [ + "100" + ], + "hot_plate_temp" : [ + "100" + ], + "cool_plate_temp_initial_layer" : [ + "100" + ], + "eng_plate_temp_initial_layer" : [ + "100" + ], + "hot_plate_temp_initial_layer" : [ + "100" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "fan_max_speed": [ + "15" + ], + "fan_min_speed": [ + "15" + ], + "slow_down_layer_time": [ + "20" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.19" + ], + "filament_retraction_length": [ + "2.7" + ], + "filament_retraction_minimum_travel": [ + "3" + ], + + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS 0.25.json b/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS 0.25.json index 8dd21dc40a1..0556cde0912 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS 0.25.json +++ b/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS 0.25.json @@ -44,6 +44,9 @@ "pressure_advance": [ "0.55" ], + "filament_retraction_minimum_travel": [ + "2" + ], "compatible_printers": [ "Prusa MINIIS 0.25 nozzle" diff --git a/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS 0.6.json b/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS 0.6.json index f2016a0eeb8..9d2eeca1179 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS 0.6.json +++ b/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS 0.6.json @@ -44,6 +44,9 @@ "pressure_advance": [ "0.1" ], + "filament_retraction_minimum_travel": [ + "2" + ], "compatible_printers": [ "Prusa MINIIS 0.6 nozzle" diff --git a/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS 0.8.json b/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS 0.8.json index 739c7b20789..17eea8c03ee 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS 0.8.json +++ b/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS 0.8.json @@ -44,6 +44,9 @@ "pressure_advance": [ "0.07" ], + "filament_retraction_minimum_travel": [ + "2" + ], "compatible_printers": [ "Prusa MINIIS 0.8 nozzle" diff --git a/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS.json b/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS.json index f6dd7710f77..c2ef2cc717c 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS.json +++ b/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS.json @@ -44,6 +44,9 @@ "pressure_advance": [ "0.19" ], + "filament_retraction_minimum_travel": [ + "2" + ], "compatible_printers": [ "Prusa MINIIS 0.4 nozzle" diff --git a/resources/profiles/Prusa/filament/Prusa Generic ASA HF @MINIIS 0.6.json b/resources/profiles/Prusa/filament/Prusa Generic ASA HF @MINIIS 0.6.json new file mode 100644 index 00000000000..57c0db446cf --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic ASA HF @MINIIS 0.6.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic ASA HF @MINIIS 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_asa", + "filament_flow_ratio": [ + "1" + ], + "cool_plate_temp" : [ + "100" + ], + "eng_plate_temp" : [ + "100" + ], + "hot_plate_temp" : [ + "100" + ], + "cool_plate_temp_initial_layer" : [ + "100" + ], + "eng_plate_temp_initial_layer" : [ + "100" + ], + "hot_plate_temp_initial_layer" : [ + "100" + ], + "filament_max_volumetric_speed": [ + "30" + ], + "fan_max_speed": [ + "15" + ], + "fan_min_speed": [ + "15" + ], + "slow_down_layer_time": [ + "20" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.1" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + + "compatible_printers": [ + "Prusa MINIIS 0.6 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic ASA HF @MINIIS 0.8.json b/resources/profiles/Prusa/filament/Prusa Generic ASA HF @MINIIS 0.8.json new file mode 100644 index 00000000000..dd5165f8145 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic ASA HF @MINIIS 0.8.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic ASA HF @MINIIS 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_asa", + "filament_flow_ratio": [ + "1" + ], + "cool_plate_temp" : [ + "100" + ], + "eng_plate_temp" : [ + "100" + ], + "hot_plate_temp" : [ + "100" + ], + "cool_plate_temp_initial_layer" : [ + "100" + ], + "eng_plate_temp_initial_layer" : [ + "100" + ], + "hot_plate_temp_initial_layer" : [ + "100" + ], + "filament_max_volumetric_speed": [ + "35" + ], + "fan_max_speed": [ + "15" + ], + "fan_min_speed": [ + "15" + ], + "slow_down_layer_time": [ + "20" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.07" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + + + "compatible_printers": [ + "Prusa MINIIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic ASA HF @MINIIS.json b/resources/profiles/Prusa/filament/Prusa Generic ASA HF @MINIIS.json new file mode 100644 index 00000000000..152b70060d6 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic ASA HF @MINIIS.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic ASA HF @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_asa", + "filament_flow_ratio": [ + "1" + ], + "cool_plate_temp" : [ + "100" + ], + "eng_plate_temp" : [ + "100" + ], + "hot_plate_temp" : [ + "100" + ], + "cool_plate_temp_initial_layer" : [ + "100" + ], + "eng_plate_temp_initial_layer" : [ + "100" + ], + "hot_plate_temp_initial_layer" : [ + "100" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "fan_max_speed": [ + "15" + ], + "fan_min_speed": [ + "15" + ], + "slow_down_layer_time": [ + "20" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.19" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic PC HF @MINIIS 0.6.json b/resources/profiles/Prusa/filament/Prusa Generic PC HF @MINIIS 0.6.json new file mode 100644 index 00000000000..0cd3e6e2a56 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic PC HF @MINIIS 0.6.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic PC HF @MINIIS 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pc", + "filament_max_volumetric_speed": [ + "35" + ], + "filament_flow_ratio": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.1" + ], + + "compatible_printers": [ + "Prusa MINIIS 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/filament/Prusa Generic PC HF @MINIIS 0.8.json b/resources/profiles/Prusa/filament/Prusa Generic PC HF @MINIIS 0.8.json new file mode 100644 index 00000000000..e444cad43ea --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic PC HF @MINIIS 0.8.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic PC HF @MINIIS 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pc", + "filament_max_volumetric_speed": [ + "29" + ], + "filament_flow_ratio": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.07" + ], + + "compatible_printers": [ + "Prusa MINIIS 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/filament/Prusa Generic PC HF @MINIIS.json b/resources/profiles/Prusa/filament/Prusa Generic PC HF @MINIIS.json new file mode 100644 index 00000000000..329c9716ec4 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic PC HF @MINIIS.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic PC HF @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pc", + "filament_max_volumetric_speed": [ + "24" + ], + "filament_flow_ratio": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.19" + ], + + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS 0.25.json b/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS 0.25.json index 4c64f88db23..031b7208601 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS 0.25.json +++ b/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS 0.25.json @@ -56,6 +56,15 @@ "pressure_advance": [ "1.02" ], + "filament_retraction_speed": [ + "45" + ], + "filament_deretraction_speed": [ + "25" + ], + "filament_retraction_minimum_travel": [ + "1" + ], "compatible_printers": [ "Prusa MINIIS 0.25 nozzle" diff --git a/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS 0.6.json b/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS 0.6.json index 8a32807d158..5a281a2b1b4 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS 0.6.json +++ b/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS 0.6.json @@ -56,6 +56,15 @@ "pressure_advance": [ "0.22" ], + "filament_retraction_speed": [ + "45" + ], + "filament_deretraction_speed": [ + "25" + ], + "filament_retraction_minimum_travel": [ + "1" + ], "compatible_printers": [ "Prusa MINIIS 0.6 nozzle" diff --git a/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS 0.8.json b/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS 0.8.json index e53595ee01a..bba53df6b82 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS 0.8.json +++ b/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS 0.8.json @@ -56,6 +56,15 @@ "pressure_advance": [ "0.15" ], + "filament_retraction_speed": [ + "45" + ], + "filament_deretraction_speed": [ + "25" + ], + "filament_retraction_minimum_travel": [ + "1" + ], "compatible_printers": [ "Prusa MINIIS 0.8 nozzle" diff --git a/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS.json b/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS.json index 7ce30af419b..a02e8c7d780 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS.json +++ b/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS.json @@ -56,6 +56,15 @@ "pressure_advance": [ "0.4" ], + "filament_retraction_speed": [ + "45" + ], + "filament_deretraction_speed": [ + "25" + ], + "filament_retraction_minimum_travel": [ + "1" + ], "compatible_printers": [ "Prusa MINIIS 0.4 nozzle" diff --git a/resources/profiles/Prusa/filament/Prusa Generic PETG HF @MINIIS 0.6.json b/resources/profiles/Prusa/filament/Prusa Generic PETG HF @MINIIS 0.6.json new file mode 100644 index 00000000000..d8bbf8f5b33 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic PETG HF @MINIIS 0.6.json @@ -0,0 +1,72 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic PETG HF @MINIIS 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pet", + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_cooling_layer_time": [ + "30" + ], + "overhang_fan_speed": [ + "50" + ], + "overhang_fan_threshold": [ + "25%" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "17" + ], + "filament_flow_ratio": [ + "1" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "hot_plate_temp": [ + "85" + ], + "hot_plate_temp_initial_layer": [ + "85" + ], + "filament_max_volumetric_speed": [ + "30" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.22" + ], + "filament_retraction_speed": [ + "45" + ], + "filament_deretraction_speed": [ + "25" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + + "compatible_printers": [ + "Prusa MINIIS 0.6 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic PETG HF @MINIIS 0.8.json b/resources/profiles/Prusa/filament/Prusa Generic PETG HF @MINIIS 0.8.json new file mode 100644 index 00000000000..86eaf650e2a --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic PETG HF @MINIIS 0.8.json @@ -0,0 +1,72 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic PETG HF @MINIIS 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pet", + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_cooling_layer_time": [ + "30" + ], + "overhang_fan_speed": [ + "50" + ], + "overhang_fan_threshold": [ + "25%" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "20" + ], + "filament_flow_ratio": [ + "1" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "hot_plate_temp": [ + "85" + ], + "hot_plate_temp_initial_layer": [ + "85" + ], + "filament_max_volumetric_speed": [ + "32" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.15" + ], + "filament_retraction_speed": [ + "45" + ], + "filament_deretraction_speed": [ + "25" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + + "compatible_printers": [ + "Prusa MINIIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic PETG HF @MINIIS.json b/resources/profiles/Prusa/filament/Prusa Generic PETG HF @MINIIS.json new file mode 100644 index 00000000000..d62bd7eeb57 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic PETG HF @MINIIS.json @@ -0,0 +1,72 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic PETG HF @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pet", + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_cooling_layer_time": [ + "30" + ], + "overhang_fan_speed": [ + "50" + ], + "overhang_fan_threshold": [ + "25%" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "10" + ], + "filament_flow_ratio": [ + "1" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "hot_plate_temp": [ + "85" + ], + "hot_plate_temp_initial_layer": [ + "85" + ], + "filament_max_volumetric_speed": [ + "24" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.4" + ], + "filament_retraction_speed": [ + "45" + ], + "filament_deretraction_speed": [ + "25" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic PLA HF @MINIIS 0.6.json b/resources/profiles/Prusa/filament/Prusa Generic PLA HF @MINIIS 0.6.json new file mode 100644 index 00000000000..49f104af142 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic PLA HF @MINIIS 0.6.json @@ -0,0 +1,28 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic PLA HF @MINIIS 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla", + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "30" + ], + "slow_down_layer_time": [ + "12" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.17" + ], + + + "compatible_printers": [ + "Prusa MINIIS 0.6 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic PLA HF @MINIIS 0.8.json b/resources/profiles/Prusa/filament/Prusa Generic PLA HF @MINIIS 0.8.json new file mode 100644 index 00000000000..897c611d6ba --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic PLA HF @MINIIS 0.8.json @@ -0,0 +1,28 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic PLA HF @MINIIS 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla", + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "36" + ], + "slow_down_layer_time": [ + "15" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.12" + ], + + + "compatible_printers": [ + "Prusa MINIIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic PLA HF @MINIIS.json b/resources/profiles/Prusa/filament/Prusa Generic PLA HF @MINIIS.json new file mode 100644 index 00000000000..b639858579c --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic PLA HF @MINIIS.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic PLA HF @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla", + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "24" + ], + "slow_down_layer_time": [ + "10" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.27" + ], + + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic PVA HF @MINIIS 0.6.json b/resources/profiles/Prusa/filament/Prusa Generic PVA HF @MINIIS 0.6.json new file mode 100644 index 00000000000..7873b7dd129 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic PVA HF @MINIIS 0.6.json @@ -0,0 +1,30 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic PVA HF @MINIIS 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pva", + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "4" + ], + "slow_down_layer_time": [ + "7" + ], + "slow_down_min_speed": [ + "10" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.1" + ], + + "compatible_printers": [ + "Prusa MINIIS 0.6 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic PVA HF @MINIIS 0.8.json b/resources/profiles/Prusa/filament/Prusa Generic PVA HF @MINIIS 0.8.json new file mode 100644 index 00000000000..20b1bacfe47 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic PVA HF @MINIIS 0.8.json @@ -0,0 +1,30 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic PVA HF @MINIIS 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pva", + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "4" + ], + "slow_down_layer_time": [ + "7" + ], + "slow_down_min_speed": [ + "10" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.07" + ], + + "compatible_printers": [ + "Prusa MINIIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic PVA HF @MINIIS.json b/resources/profiles/Prusa/filament/Prusa Generic PVA HF @MINIIS.json new file mode 100644 index 00000000000..7d799c3c3b2 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic PVA HF @MINIIS.json @@ -0,0 +1,29 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic PVA HF @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pva", + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "4" + ], + "slow_down_layer_time": [ + "7" + ], + "slow_down_min_speed": [ + "10" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.19" + ], + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic TPU HF @MINIIS.json b/resources/profiles/Prusa/filament/Prusa Generic TPU HF @MINIIS.json new file mode 100644 index 00000000000..20618c4c498 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic TPU HF @MINIIS.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "setting_id": "GFSA04", + "name": "Prusa Generic TPU HF @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_tpu", + "filament_max_volumetric_speed": [ + "10" + ], + "filament_flow_ratio": [ + "1.15" + ], + "hot_plate_temp" : [ + "50" + ], + "hot_plate_temp_initial_layer" : [ + "50" + ], + "filament_type": [ + "FLEX" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature": [ + "210" + ], + "filament_retraction_length": [ + "3" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_deretraction_speed": [ + "16" + ], + "filament_retraction_minimum_travel": [ + "6" + ], + "filament_wipe": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "full_fan_speed_layer": [ + "3" + ], + "fan_min_speed": [ + "30" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "80" + ], + "slow_down_layer_time": [ + "4" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_min_speed": [ + "10" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "overhang_fan_threshold": [ + "50%" + ], + "overhang_fan_speed": [ + "50" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "pressure_advance": [ + "0" + ], + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle", + "Prusa MINIIS 0.6 nozzle", + "Prusa MINIIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json b/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json index bdd750314b1..0becded2467 100644 --- a/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json +++ b/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json @@ -95,6 +95,9 @@ "z_hop": [ "0.2" ], + "fan_speedup_time": "0.2", + "fan_speedup_overhangs": "1", + "fan_kickstart": "0", "host_type": "prusalink", "printable_height": "180", "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720 ; Move print head up{endif}\nG1 X170 Y170 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+50, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM572 S0 ; reset PA\nM569 S1 X Y ; reset to stealthchop for X Y\nM84 ; disable motors\n; max_layer_z = [max_layer_z]", diff --git a/resources/profiles/Prusa/machine/Prusa MK3.5 0.4 nozzle.json b/resources/profiles/Prusa/machine/Prusa MK3.5 0.4 nozzle.json index 0d0af0fdf4f..efdd7a82deb 100644 --- a/resources/profiles/Prusa/machine/Prusa MK3.5 0.4 nozzle.json +++ b/resources/profiles/Prusa/machine/Prusa MK3.5 0.4 nozzle.json @@ -95,6 +95,9 @@ "z_hop": [ "0.2" ], + "fan_speedup_time": "0.2", + "fan_speedup_overhangs": "1", + "fan_kickstart": "0", "host_type": "prusalink", "printable_height": "210", "machine_end_gcode": "{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X241 Y201 F3600 ; park\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+23, max_print_height)} F300 ; Move print head up{endif}\nG4 ; wait\nM572 S0 ; reset PA\nM593 X T2 F0 ; disable IS\nM593 Y T2 F0 ; disable IS\nM84 X Y E ; disable motors\n; max_layer_z = [max_layer_z]", diff --git a/resources/profiles/Prusa/process/0.05mm Detail @MK3.5.json b/resources/profiles/Prusa/process/0.05mm Detail @MK3.5.json index a43f28e5551..cc47890376b 100644 --- a/resources/profiles/Prusa/process/0.05mm Detail @MK3.5.json +++ b/resources/profiles/Prusa/process/0.05mm Detail @MK3.5.json @@ -19,6 +19,7 @@ "top_shell_layers": "13", "bottom_shell_thickness": "0.5", "bottom_shell_layers": "10", + "support_top_z_distance": "0.09", "compatible_printers": [ "Prusa MK3.5 0.25 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.07mm Detail @MINIIS.json b/resources/profiles/Prusa/process/0.07mm Detail @MINIIS.json index 51e281895e7..f64433aa598 100644 --- a/resources/profiles/Prusa/process/0.07mm Detail @MINIIS.json +++ b/resources/profiles/Prusa/process/0.07mm Detail @MINIIS.json @@ -21,6 +21,7 @@ "bottom_shell_layers": "8", "bridge_speed": "30", "internal_solid_infill_speed": "140", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MINIIS 0.25 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.07mm Detail @MK3.5.json b/resources/profiles/Prusa/process/0.07mm Detail @MK3.5.json index b1217f9fd88..89f52f17ba3 100644 --- a/resources/profiles/Prusa/process/0.07mm Detail @MK3.5.json +++ b/resources/profiles/Prusa/process/0.07mm Detail @MK3.5.json @@ -21,6 +21,7 @@ "bottom_shell_layers": "8", "bridge_speed": "30", "internal_solid_infill_speed": "140", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MK3.5 0.25 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.10mm Speed @MINIIS.json b/resources/profiles/Prusa/process/0.10mm Speed @MINIIS.json index 220e8c33d69..13ebaaabd1b 100644 --- a/resources/profiles/Prusa/process/0.10mm Speed @MINIIS.json +++ b/resources/profiles/Prusa/process/0.10mm Speed @MINIIS.json @@ -24,6 +24,7 @@ "internal_solid_infill_acceleration": "3000", "inner_wall_acceleration": "2000", "outer_wall_acceleration": "1500", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MINIIS 0.4 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.10mm Speed @MK3.5.json b/resources/profiles/Prusa/process/0.10mm Speed @MK3.5.json index 8a1594f17bc..7d5cb0cadc5 100644 --- a/resources/profiles/Prusa/process/0.10mm Speed @MK3.5.json +++ b/resources/profiles/Prusa/process/0.10mm Speed @MK3.5.json @@ -24,6 +24,7 @@ "internal_solid_infill_acceleration": "3000", "inner_wall_acceleration": "2000", "outer_wall_acceleration": "1500", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MK3.5 0.4 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.12mm Speed @MINIIS.json b/resources/profiles/Prusa/process/0.12mm Speed @MINIIS.json index 983535f48d8..3a2110281a7 100644 --- a/resources/profiles/Prusa/process/0.12mm Speed @MINIIS.json +++ b/resources/profiles/Prusa/process/0.12mm Speed @MINIIS.json @@ -31,6 +31,7 @@ "overhang_1_4_speed": "60", "internal_solid_infill_acceleration": "2500", "sparse_infill_acceleration": "2500", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MINIIS 0.25 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.12mm Speed @MK3.5.json b/resources/profiles/Prusa/process/0.12mm Speed @MK3.5.json index 56b2b36d056..cd3580cf954 100644 --- a/resources/profiles/Prusa/process/0.12mm Speed @MK3.5.json +++ b/resources/profiles/Prusa/process/0.12mm Speed @MK3.5.json @@ -31,6 +31,7 @@ "overhang_1_4_speed": "60", "internal_solid_infill_acceleration": "2500", "sparse_infill_acceleration": "2500", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MK3.5 0.25 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.12mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.12mm Standard @MINIIS.json index 4192e7d5f76..15ecfb803c2 100644 --- a/resources/profiles/Prusa/process/0.12mm Standard @MINIIS.json +++ b/resources/profiles/Prusa/process/0.12mm Standard @MINIIS.json @@ -36,6 +36,7 @@ "internal_solid_infill_acceleration": "2500", "sparse_infill_acceleration": "2500", "travel_acceleration": "3000", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MINIIS 0.25 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.12mm Standard @MK3.5.json b/resources/profiles/Prusa/process/0.12mm Standard @MK3.5.json index a008f0ae0f8..a9fcdd33e4f 100644 --- a/resources/profiles/Prusa/process/0.12mm Standard @MK3.5.json +++ b/resources/profiles/Prusa/process/0.12mm Standard @MK3.5.json @@ -36,6 +36,7 @@ "internal_solid_infill_acceleration": "2500", "sparse_infill_acceleration": "2500", "travel_acceleration": "3000", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MK3.5 0.25 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.15mm High Flow @MINIIS.json b/resources/profiles/Prusa/process/0.15mm High Flow @MINIIS.json new file mode 100644 index 00000000000..4e0594c83cc --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm High Flow @MINIIS.json @@ -0,0 +1,36 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.15mm High Flow @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_highflow_miniis", + "line_width": "0.45", + "inner_wall_line_width": "0.45", + "outer_wall_line_width": "0.45", + "top_surface_line_width": "0.42", + "sparse_infill_line_width": "0.45", + "initial_layer_line_width": "0.5", + "internal_solid_infill_line_width": "0.45", + "support_line_width": "0.36", + "layer_height": "0.15", + "initial_layer_print_height": "0.20", + "top_shell_thickness": "0.7", + "top_shell_layers": "5", + "bottom_shell_thickness": "0.5", + "bottom_shell_layers": "4", + "bridge_speed": "45", + "default_acceleration": "3000", + "initial_layer_acceleration": "500", + "top_surface_acceleration": "3000", + "travel_acceleration": "4000", + "sparse_infill_acceleration": "4000", + "internal_solid_infill_acceleration": "3500", + "inner_wall_acceleration": "3500", + "outer_wall_acceleration": "2500", + "bridge_acceleration": "1500", + "support_top_z_distance": "0.1", + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.15mm High Flow @MK3.5.json b/resources/profiles/Prusa/process/0.15mm High Flow @MK3.5.json index 32c7accd493..6eb536ee28d 100644 --- a/resources/profiles/Prusa/process/0.15mm High Flow @MK3.5.json +++ b/resources/profiles/Prusa/process/0.15mm High Flow @MK3.5.json @@ -29,6 +29,7 @@ "inner_wall_acceleration": "3500", "outer_wall_acceleration": "2500", "bridge_acceleration": "1500", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MK3.5 0.4 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.15mm Speed @MINIIS 0.25.json b/resources/profiles/Prusa/process/0.15mm Speed @MINIIS 0.25.json index da4e58bc3b4..894ea73da11 100644 --- a/resources/profiles/Prusa/process/0.15mm Speed @MINIIS 0.25.json +++ b/resources/profiles/Prusa/process/0.15mm Speed @MINIIS 0.25.json @@ -29,6 +29,7 @@ "internal_solid_infill_acceleration": "2500", "inner_wall_acceleration": "2000", "outer_wall_acceleration": "1500", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MINIIS 0.25 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.15mm Speed @MINIIS.json b/resources/profiles/Prusa/process/0.15mm Speed @MINIIS.json index 14bce20a508..1f47c68ef9b 100644 --- a/resources/profiles/Prusa/process/0.15mm Speed @MINIIS.json +++ b/resources/profiles/Prusa/process/0.15mm Speed @MINIIS.json @@ -29,6 +29,7 @@ "internal_solid_infill_acceleration": "2500", "inner_wall_acceleration": "2000", "outer_wall_acceleration": "1500", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MINIIS 0.4 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.15mm Speed @MK3.5 0.25.json b/resources/profiles/Prusa/process/0.15mm Speed @MK3.5 0.25.json index 45166206473..09ec86c9603 100644 --- a/resources/profiles/Prusa/process/0.15mm Speed @MK3.5 0.25.json +++ b/resources/profiles/Prusa/process/0.15mm Speed @MK3.5 0.25.json @@ -29,6 +29,7 @@ "internal_solid_infill_acceleration": "2500", "inner_wall_acceleration": "2000", "outer_wall_acceleration": "1500", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MK3.5 0.25 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.15mm Speed @MK3.5.json b/resources/profiles/Prusa/process/0.15mm Speed @MK3.5.json index 3f09b2a8271..eae70301932 100644 --- a/resources/profiles/Prusa/process/0.15mm Speed @MK3.5.json +++ b/resources/profiles/Prusa/process/0.15mm Speed @MK3.5.json @@ -29,6 +29,7 @@ "inner_wall_acceleration": "2000", "outer_wall_acceleration": "1500", "bridge_acceleration": "1500", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MK3.5 0.4 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.25.json b/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.25.json index 57c789f5bd9..ac8014b1c90 100644 --- a/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.25.json +++ b/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.25.json @@ -29,6 +29,7 @@ "internal_solid_infill_acceleration": "2500", "inner_wall_acceleration": "2000", "outer_wall_acceleration": "1500", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MINIIS 0.25 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.6.json b/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.6.json index 52819af718f..7c3efbb79d4 100644 --- a/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.6.json +++ b/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.6.json @@ -37,6 +37,7 @@ "inner_wall_acceleration": "2500", "outer_wall_acceleration": "1500", "bridge_acceleration": "1500", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MINIIS 0.6 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.15mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.15mm Standard @MINIIS.json index 6d6abbfaf19..99f5f5c6691 100644 --- a/resources/profiles/Prusa/process/0.15mm Standard @MINIIS.json +++ b/resources/profiles/Prusa/process/0.15mm Standard @MINIIS.json @@ -33,6 +33,7 @@ "inner_wall_acceleration": "2000", "outer_wall_acceleration": "1500", "bridge_acceleration": "1500", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MINIIS 0.4 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.15mm Standard @MK3.5 0.25.json b/resources/profiles/Prusa/process/0.15mm Standard @MK3.5 0.25.json index bd75d3323bb..dcd6cc96269 100644 --- a/resources/profiles/Prusa/process/0.15mm Standard @MK3.5 0.25.json +++ b/resources/profiles/Prusa/process/0.15mm Standard @MK3.5 0.25.json @@ -29,6 +29,7 @@ "internal_solid_infill_acceleration": "2500", "inner_wall_acceleration": "2000", "outer_wall_acceleration": "1500", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MK3.5 0.25 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.15mm Standard @MK3.5 0.6.json b/resources/profiles/Prusa/process/0.15mm Standard @MK3.5 0.6.json index 7223f04299c..dc39f08bd71 100644 --- a/resources/profiles/Prusa/process/0.15mm Standard @MK3.5 0.6.json +++ b/resources/profiles/Prusa/process/0.15mm Standard @MK3.5 0.6.json @@ -37,6 +37,7 @@ "inner_wall_acceleration": "2500", "outer_wall_acceleration": "1500", "bridge_acceleration": "1500", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MK3.5 0.6 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.15mm Standard @MK3.5.json b/resources/profiles/Prusa/process/0.15mm Standard @MK3.5.json index 076ddb0e95d..1910bba624a 100644 --- a/resources/profiles/Prusa/process/0.15mm Standard @MK3.5.json +++ b/resources/profiles/Prusa/process/0.15mm Standard @MK3.5.json @@ -28,6 +28,7 @@ "internal_solid_infill_acceleration": "2500", "inner_wall_acceleration": "2000", "outer_wall_acceleration": "1500", + "support_top_z_distance": "0.1", "compatible_printers": [ "Prusa MK3.5 0.4 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.20mm High Flow @MINIIS 0.6.json b/resources/profiles/Prusa/process/0.20mm High Flow @MINIIS 0.6.json new file mode 100644 index 00000000000..737420d1d28 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm High Flow @MINIIS 0.6.json @@ -0,0 +1,40 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm High Flow @MINIIS 0.6", + "from": "system", + "instantiation": "true", + "inherits": "process_highflow_miniis", + "compatible_printers": [ + "Prusa MINIIS 0.6 nozzle" + ], + "layer_height": "0.20", + "initial_layer_print_height": "0.25", + "line_width": "0.68", + "inner_wall_line_width": "0.62", + "outer_wall_line_width": "0.62", + "top_surface_line_width": "0.5", + "sparse_infill_line_width": "0.62", + "initial_layer_line_width": "0.68", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.5", + "wall_loops": "2", + "outer_wall_speed": "200", + "inner_wall_speed": "220", + "small_perimeter_speed": "170", + "sparse_infill_speed": "200", + "internal_solid_infill_speed": "200", + "top_surface_speed": "70", + "gap_infill_speed": "80", + "support_speed": "110", + "bridge_speed": "40", + "travel_speed": "300", + "default_acceleration": "2500", + "initial_layer_acceleration": "500", + "top_surface_acceleration": "1500", + "inner_wall_acceleration": "4000", + "outer_wall_acceleration": "4000", + "bridge_acceleration": "1500", + "internal_solid_infill_acceleration": "3000", + "overhang_1_4_speed": "45" +} diff --git a/resources/profiles/Prusa/process/0.20mm High Flow @MINIIS.json b/resources/profiles/Prusa/process/0.20mm High Flow @MINIIS.json new file mode 100644 index 00000000000..0e4f6f4587d --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm High Flow @MINIIS.json @@ -0,0 +1,19 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm High Flow @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_highflow_miniis", + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle" + ], + "line_width": "0.45", + "inner_wall_line_width": "0.45", + "outer_wall_line_width": "0.45", + "top_surface_line_width": "0.42", + "sparse_infill_line_width": "0.45", + "initial_layer_line_width": "0.5", + "internal_solid_infill_line_width": "0.45", + "support_line_width": "0.36" +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.25mm High Flow @MINIIS.json b/resources/profiles/Prusa/process/0.25mm High Flow @MINIIS.json new file mode 100644 index 00000000000..cb6c04cab65 --- /dev/null +++ b/resources/profiles/Prusa/process/0.25mm High Flow @MINIIS.json @@ -0,0 +1,47 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.25mm High Flow @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_highflow_miniis", + "line_width": "0.68", + "inner_wall_line_width": "0.68", + "outer_wall_line_width": "0.68", + "top_surface_line_width": "0.55", + "sparse_infill_line_width": "0.68", + "initial_layer_line_width": "0.68", + "internal_solid_infill_line_width": "0.68", + "support_line_width": "0.5", + "layer_height": "0.25", + "initial_layer_print_height": "0.25", + "wall_loops": "2", + "top_shell_thickness": "0.9", + "top_shell_layers": "4", + "bottom_shell_thickness": "0.6", + "bottom_shell_layers": "3", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "outer_wall_speed": "180", + "inner_wall_speed": "180", + "small_perimeter_speed": "170", + "sparse_infill_speed": "190", + "internal_solid_infill_speed": "190", + "top_surface_speed": "60", + "gap_infill_speed": "70", + "support_speed": "110", + "bridge_speed": "40", + "travel_speed": "300", + "default_acceleration": "2500", + "initial_layer_acceleration": "500", + "top_surface_acceleration": "2000", + "inner_wall_acceleration": "4000", + "outer_wall_acceleration": "4000", + "bridge_acceleration": "1500", + "internal_solid_infill_acceleration": "3000", + "overhang_1_4_speed": "45", + "support_top_z_distance": "0.25", + "compatible_printers": [ + "Prusa MINIIS 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.25mm High Flow @MK3.5.json b/resources/profiles/Prusa/process/0.25mm High Flow @MK3.5.json index 5d8fb04ef36..033258e2b62 100644 --- a/resources/profiles/Prusa/process/0.25mm High Flow @MK3.5.json +++ b/resources/profiles/Prusa/process/0.25mm High Flow @MK3.5.json @@ -40,6 +40,7 @@ "bridge_acceleration": "1500", "internal_solid_infill_acceleration": "3000", "overhang_1_4_speed": "45", + "support_top_z_distance": "0.25", "compatible_printers": [ "Prusa MK3.5 0.6 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.25mm Speed @MINIIS.json b/resources/profiles/Prusa/process/0.25mm Speed @MINIIS.json index a0dcf727595..425eb57db71 100644 --- a/resources/profiles/Prusa/process/0.25mm Speed @MINIIS.json +++ b/resources/profiles/Prusa/process/0.25mm Speed @MINIIS.json @@ -30,6 +30,7 @@ "overhang_1_4_speed": "45", "travel_speed": "300", "internal_solid_infill_acceleration": "3000", + "support_top_z_distance": "0.25", "compatible_printers": [ "Prusa MINIIS 0.6 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.25mm Speed @MK3.5.json b/resources/profiles/Prusa/process/0.25mm Speed @MK3.5.json index 47e04f49071..4b445a511b2 100644 --- a/resources/profiles/Prusa/process/0.25mm Speed @MK3.5.json +++ b/resources/profiles/Prusa/process/0.25mm Speed @MK3.5.json @@ -30,6 +30,7 @@ "overhang_1_4_speed": "45", "travel_speed": "300", "internal_solid_infill_acceleration": "3000", + "support_top_z_distance": "0.25", "compatible_printers": [ "Prusa MK3.5 0.6 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.25mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.25mm Standard @MINIIS.json index 0f3dcf81b6b..8a58be2a990 100644 --- a/resources/profiles/Prusa/process/0.25mm Standard @MINIIS.json +++ b/resources/profiles/Prusa/process/0.25mm Standard @MINIIS.json @@ -29,6 +29,7 @@ "gap_infill_speed": "60", "support_speed": "80", "travel_speed": "300", + "support_top_z_distance": "0.25", "compatible_printers": [ "Prusa MINIIS 0.6 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.25mm Standard @MK3.5.json b/resources/profiles/Prusa/process/0.25mm Standard @MK3.5.json index 67e90a29df2..f5ec902dbe3 100644 --- a/resources/profiles/Prusa/process/0.25mm Standard @MK3.5.json +++ b/resources/profiles/Prusa/process/0.25mm Standard @MK3.5.json @@ -29,6 +29,7 @@ "gap_infill_speed": "60", "support_speed": "80", "travel_speed": "300", + "support_top_z_distance": "0.25", "compatible_printers": [ "Prusa MK3.5 0.6 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.30mm Detail @MINIIS.json b/resources/profiles/Prusa/process/0.30mm Detail @MINIIS.json index 447720117bd..049fc1bedc0 100644 --- a/resources/profiles/Prusa/process/0.30mm Detail @MINIIS.json +++ b/resources/profiles/Prusa/process/0.30mm Detail @MINIIS.json @@ -21,6 +21,7 @@ "bottom_shell_thickness": "0.5", "bottom_shell_layers": "2", "travel_speed": "300", + "support_top_z_distance": "0.25", "compatible_printers": [ "Prusa MINIIS 0.8 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.30mm Detail @MK3.5.json b/resources/profiles/Prusa/process/0.30mm Detail @MK3.5.json index 2371daedc99..9b126330e5a 100644 --- a/resources/profiles/Prusa/process/0.30mm Detail @MK3.5.json +++ b/resources/profiles/Prusa/process/0.30mm Detail @MK3.5.json @@ -21,6 +21,7 @@ "bottom_shell_thickness": "0.5", "bottom_shell_layers": "2", "travel_speed": "300", + "support_top_z_distance": "0.25", "compatible_printers": [ "Prusa MK3.5 0.8 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.32mm High Flow @MINIIS.json b/resources/profiles/Prusa/process/0.32mm High Flow @MINIIS.json new file mode 100644 index 00000000000..d09417fb005 --- /dev/null +++ b/resources/profiles/Prusa/process/0.32mm High Flow @MINIIS.json @@ -0,0 +1,44 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.32mm High Flow @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_highflow_miniis", + "line_width": "0.68", + "inner_wall_line_width": "0.68", + "outer_wall_line_width": "0.68", + "top_surface_line_width": "0.55", + "sparse_infill_line_width": "0.68", + "initial_layer_line_width": "0.68", + "internal_solid_infill_line_width": "0.68", + "support_line_width": "0.5", + "initial_layer_print_height": "0.25", + "layer_height": "0.32", + "wall_loops": "2", + "top_shell_thickness": "0.9", + "top_shell_layers": "4", + "bottom_shell_thickness": "0.6", + "bottom_shell_layers": "3", + "outer_wall_speed": "145", + "inner_wall_speed": "145", + "bridge_speed": "40", + "support_speed": "110", + "small_perimeter_speed": "145", + "sparse_infill_speed": "145", + "internal_solid_infill_speed": "140", + "top_surface_speed": "60", + "gap_infill_speed": "60", + "travel_speed": "300", + "default_acceleration": "2500", + "initial_layer_acceleration": "500", + "top_surface_acceleration": "2000", + "inner_wall_acceleration": "4000", + "outer_wall_acceleration": "4000", + "bridge_acceleration": "1500", + "internal_solid_infill_acceleration": "3000", + "support_top_z_distance": "0.25", + "compatible_printers": [ + "Prusa MINIIS 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.32mm High Flow @MK3.5.json b/resources/profiles/Prusa/process/0.32mm High Flow @MK3.5.json index 80473edccda..2c559f2c10c 100644 --- a/resources/profiles/Prusa/process/0.32mm High Flow @MK3.5.json +++ b/resources/profiles/Prusa/process/0.32mm High Flow @MK3.5.json @@ -39,6 +39,7 @@ "outer_wall_acceleration": "4000", "bridge_acceleration": "1500", "internal_solid_infill_acceleration": "3000", + "support_top_z_distance": "0.25", "compatible_printers": [ "Prusa MK3.5 0.6 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.32mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.32mm Standard @MINIIS.json new file mode 100644 index 00000000000..22e9550586b --- /dev/null +++ b/resources/profiles/Prusa/process/0.32mm Standard @MINIIS.json @@ -0,0 +1,37 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.32mm Standard @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_common_miniis", + "line_width": "0.68", + "inner_wall_line_width": "0.68", + "outer_wall_line_width": "0.68", + "top_surface_line_width": "0.55", + "sparse_infill_line_width": "0.68", + "initial_layer_line_width": "0.68", + "internal_solid_infill_line_width": "0.68", + "support_line_width": "0.5", + "initial_layer_print_height": "0.25", + "layer_height": "0.32", + "wall_loops": "2", + "top_shell_thickness": "0.9", + "top_shell_layers": "4", + "bottom_shell_thickness": "0.6", + "bottom_shell_layers": "3", + "outer_wall_speed": "45", + "inner_wall_speed": "60", + "bridge_speed": "30", + "support_speed": "60", + "small_perimeter_speed": "45", + "sparse_infill_speed": "70", + "internal_solid_infill_speed": "60", + "top_surface_speed": "55", + "gap_infill_speed": "45", + "travel_speed": "300", + "support_top_z_distance": "0.25", + "compatible_printers": [ + "Prusa MINIIS 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.32mm Standard @MK3.5.json b/resources/profiles/Prusa/process/0.32mm Standard @MK3.5.json index 6ef599b7e81..260fca5de1d 100644 --- a/resources/profiles/Prusa/process/0.32mm Standard @MK3.5.json +++ b/resources/profiles/Prusa/process/0.32mm Standard @MK3.5.json @@ -30,6 +30,7 @@ "top_surface_speed": "55", "gap_infill_speed": "45", "travel_speed": "300", + "support_top_z_distance": "0.25", "compatible_printers": [ "Prusa MK3.5 0.6 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.35mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.35mm Standard @MINIIS.json index 6aaff5322a6..9ac07158e4c 100644 --- a/resources/profiles/Prusa/process/0.35mm Standard @MINIIS.json +++ b/resources/profiles/Prusa/process/0.35mm Standard @MINIIS.json @@ -30,6 +30,7 @@ "top_surface_speed": "55", "gap_infill_speed": "45", "travel_speed": "300", + "support_top_z_distance": "0.25", "compatible_printers": [ "Prusa MINIIS 0.6 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.35mm Standard @MK3.5.json b/resources/profiles/Prusa/process/0.35mm Standard @MK3.5.json index 5f4f75853dc..dc02257e54a 100644 --- a/resources/profiles/Prusa/process/0.35mm Standard @MK3.5.json +++ b/resources/profiles/Prusa/process/0.35mm Standard @MK3.5.json @@ -30,6 +30,7 @@ "top_surface_speed": "55", "gap_infill_speed": "45", "travel_speed": "300", + "support_top_z_distance": "0.25", "compatible_printers": [ "Prusa MK3.5 0.6 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.40mm High Flow @MINIIS.json b/resources/profiles/Prusa/process/0.40mm High Flow @MINIIS.json new file mode 100644 index 00000000000..348a50f4b2e --- /dev/null +++ b/resources/profiles/Prusa/process/0.40mm High Flow @MINIIS.json @@ -0,0 +1,48 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.40mm High Flow @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_highflow_miniis", + "line_width": "0.9", + "inner_wall_line_width": "0.9", + "outer_wall_line_width": "0.9", + "top_surface_line_width": "0.75", + "sparse_infill_line_width": "0.9", + "initial_layer_line_width": "1", + "internal_solid_infill_line_width": "0.9", + "support_line_width": "0.65", + "layer_height": "0.4", + "initial_layer_print_height": "0.3", + "wall_loops": "2", + "top_shell_thickness": "1.2", + "top_shell_layers": "4", + "bottom_shell_thickness": "0.8", + "bottom_shell_layers": "3", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "55", + "outer_wall_speed": "90", + "inner_wall_speed": "100", + "bridge_speed": "22", + "support_speed": "90", + "small_perimeter_speed": "90", + "sparse_infill_speed": "105", + "internal_solid_infill_speed": "100", + "top_surface_speed": "75", + "gap_infill_speed": "65", + "travel_speed": "300", + "default_acceleration": "2000", + "initial_layer_acceleration": "500", + "top_surface_acceleration": "1500", + "travel_acceleration": "4000", + "sparse_infill_acceleration": "4000", + "internal_solid_infill_acceleration": "3000", + "inner_wall_acceleration": "3000", + "outer_wall_acceleration": "2500", + "bridge_acceleration": "1000", + "support_top_z_distance": "0.25", + "compatible_printers": [ + "Prusa MINIIS 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.40mm High Flow @MK3.5.json b/resources/profiles/Prusa/process/0.40mm High Flow @MK3.5.json index 2f7f204a599..1504532318a 100644 --- a/resources/profiles/Prusa/process/0.40mm High Flow @MK3.5.json +++ b/resources/profiles/Prusa/process/0.40mm High Flow @MK3.5.json @@ -41,6 +41,7 @@ "inner_wall_acceleration": "3000", "outer_wall_acceleration": "2500", "bridge_acceleration": "1000", + "support_top_z_distance": "0.25", "compatible_printers": [ "Prusa MK3.5 0.8 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.40mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.40mm Standard @MINIIS.json index ab085de8be9..5e5887030cb 100644 --- a/resources/profiles/Prusa/process/0.40mm Standard @MINIIS.json +++ b/resources/profiles/Prusa/process/0.40mm Standard @MINIIS.json @@ -40,6 +40,7 @@ "inner_wall_acceleration": "2000", "outer_wall_acceleration": "1500", "bridge_acceleration": "1000", + "support_top_z_distance": "0.25", "compatible_printers": [ "Prusa MINIIS 0.8 nozzle" ] diff --git a/resources/profiles/Prusa/process/0.40mm Standard @MK3.5.json b/resources/profiles/Prusa/process/0.40mm Standard @MK3.5.json index cbe605f5cd9..720d06009eb 100644 --- a/resources/profiles/Prusa/process/0.40mm Standard @MK3.5.json +++ b/resources/profiles/Prusa/process/0.40mm Standard @MK3.5.json @@ -41,6 +41,7 @@ "inner_wall_acceleration": "2000", "outer_wall_acceleration": "1500", "bridge_acceleration": "1000", + "support_top_z_distance": "0.25", "compatible_printers": [ "Prusa MK3.5 0.8 nozzle" ] diff --git a/resources/profiles/Prusa/process/process_common_MK3.5.json b/resources/profiles/Prusa/process/process_common_MK3.5.json index 0db5e24d606..1385303662c 100644 --- a/resources/profiles/Prusa/process/process_common_MK3.5.json +++ b/resources/profiles/Prusa/process/process_common_MK3.5.json @@ -51,5 +51,14 @@ "support_speed": "100", "support_style": "snug", "precise_outer_wall": "1", - "overhang_reverse": "1" + "overhang_reverse": "1", + "raft_contact_distance": "0.15", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "3.5", + "support_threshold_angle": "40", + "support_interface_bottom_layers": "0", + "support_base_pattern": "rectilinear", + "support_interface_top_layers": "3", + "support_top_z_distance": "0.17" } \ No newline at end of file diff --git a/resources/profiles/Prusa/process/process_common_miniis.json b/resources/profiles/Prusa/process/process_common_miniis.json index 0bc991159be..36f8bdc91b6 100644 --- a/resources/profiles/Prusa/process/process_common_miniis.json +++ b/resources/profiles/Prusa/process/process_common_miniis.json @@ -51,5 +51,14 @@ "support_speed": "100", "support_style": "snug", "precise_outer_wall": "1", - "overhang_reverse": "1" + "overhang_reverse": "1", + "raft_contact_distance": "0.15", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "3.5", + "support_threshold_angle": "40", + "support_interface_bottom_layers": "0", + "support_base_pattern": "rectilinear", + "support_interface_top_layers": "3", + "support_top_z_distance": "0.17" } \ No newline at end of file diff --git a/resources/profiles/Prusa/process/process_highflow_miniis.json b/resources/profiles/Prusa/process/process_highflow_miniis.json new file mode 100644 index 00000000000..033dc36819f --- /dev/null +++ b/resources/profiles/Prusa/process/process_highflow_miniis.json @@ -0,0 +1,24 @@ +{ + "type": "process", + "name": "process_highflow_miniis", + "from": "system", + "instantiation": "false", + "inherits": "process_common_miniis", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "100", + "outer_wall_speed": "200", + "inner_wall_speed": "250", + "small_perimeter_speed": "170", + "sparse_infill_speed": "250", + "internal_solid_infill_speed": "250", + "top_surface_speed": "100", + "gap_infill_speed": "120", + "default_acceleration": "4000", + "initial_layer_acceleration": "500", + "top_surface_acceleration": "2000", + "inner_wall_acceleration": "4000", + "outer_wall_acceleration": "4000", + "bridge_acceleration": "1500", + "internal_solid_infill_acceleration": "3000", + "overhang_1_4_speed": "60" +} \ No newline at end of file