From c0ddf680708b715157f5c9028c98857ce506fcbb Mon Sep 17 00:00:00 2001
From: Ferdinand Linnenberg <ferdinand@linnenberg.dev>
Date: Sun, 1 Dec 2024 11:03:33 +0100
Subject: [PATCH 1/8] feat: updated BBL profiles to 01.10.01.50

---
 resources/profiles/BBL/cli_config.json        |  60 +++++---
 .../Bambu ABS @BBL A1 0.2 nozzle.json         |   6 +
 .../BBL/filament/Bambu ABS @BBL A1.json       |   6 +
 .../Bambu ABS @BBL X1C 0.2 nozzle.json        |   6 +
 .../Bambu ABS @BBL X1C 0.8 nozzle.json        |   6 +
 .../BBL/filament/Bambu ABS @BBL X1C.json      |   6 +
 .../BBL/filament/Bambu ABS @base.json         |   7 +-
 .../BBL/filament/Bambu ABS-GF @BBL A1.json    |   6 +
 .../BBL/filament/Bambu ABS-GF @BBL P1P.json   |   6 +
 .../BBL/filament/Bambu ABS-GF @BBL X1C.json   |   6 +
 .../BBL/filament/Bambu ABS-GF @base.json      |   7 +-
 .../Bambu ASA @BBL A1 0.2 nozzle.json         |   6 +
 .../Bambu ASA @BBL A1 0.4 nozzle.json         |   6 +
 .../Bambu ASA @BBL A1 0.6 nozzle.json         |   6 +
 .../Bambu ASA @BBL X1 0.2 nozzle.json         |   6 +
 .../Bambu ASA @BBL X1 0.6 nozzle.json         |   6 +
 .../Bambu ASA @BBL X1C 0.2 nozzle.json        |   6 +
 .../Bambu ASA @BBL X1C 0.4 nozzle.json        |   6 +
 .../BBL/filament/Bambu ASA @BBL X1C.json      |   6 +
 .../BBL/filament/Bambu ASA @base.json         |   1 +
 .../BBL/filament/Bambu ASA-Aero @base.json    |   7 +-
 .../Bambu ASA-CF @BBL A1 0.6 nozzle.json      |  12 ++
 .../BBL/filament/Bambu ASA-CF @BBL A1.json    |  11 ++
 .../Bambu ASA-CF @BBL P1P 0.6 nozzle.json     |  12 ++
 .../BBL/filament/Bambu ASA-CF @BBL P1P.json   |  11 ++
 .../Bambu ASA-CF @BBL X1C 0.6 nozzle.json     |  18 +++
 .../BBL/filament/Bambu ASA-CF @BBL X1C.json   |  14 ++
 .../BBL/filament/Bambu ASA-CF @base.json      |  44 ++++++
 .../BBL/filament/Bambu PA-CF @base.json       |   1 +
 .../BBL/filament/Bambu PA6-CF @base.json      |   1 +
 .../BBL/filament/Bambu PA6-GF @base.json      |   1 +
 .../BBL/filament/Bambu PAHT-CF @base.json     |  31 +++--
 .../BBL/filament/Bambu PET-CF @base.json      |   7 +
 .../Bambu PETG Basic @BBL A1M 0.2 nozzle.json |   6 +
 .../Bambu PETG Basic @BBL A1M 0.4 nozzle.json |   6 +
 .../Bambu PETG Basic @BBL A1M 0.8 nozzle.json |   6 +
 .../BBL/filament/Bambu PETG Basic @base.json  |   1 +
 .../Bambu PETG HF @BBL A1 0.2 nozzle.json     |   6 +
 .../Bambu PETG HF @BBL A1 0.8 nozzle.json     |   6 +
 .../BBL/filament/Bambu PETG HF @BBL A1.json   |   6 +
 .../Bambu PETG HF @BBL A1M 0.2 nozzle.json    |   6 +
 .../Bambu PETG HF @BBL A1M 0.8 nozzle.json    |   6 +
 .../BBL/filament/Bambu PETG HF @BBL A1M.json  |   6 +
 .../Bambu PETG HF @BBL X1C 0.2 nozzle.json    |   6 +
 .../Bambu PETG HF @BBL X1C 0.8 nozzle.json    |   6 +
 .../BBL/filament/Bambu PETG HF @BBL X1C.json  |   6 +
 ...u PETG Translucent @BBL A1 0.8 nozzle.json |   6 +
 .../Bambu PETG Translucent @BBL A1.json       |   6 +
 ... PETG Translucent @BBL A1M 0.8 nozzle.json |   6 +
 .../Bambu PETG Translucent @BBL A1M.json      |   6 +
 ... PETG Translucent @BBL X1C 0.8 nozzle.json |   6 +
 .../Bambu PETG Translucent @BBL X1C.json      |   6 +
 .../Bambu PETG Translucent @base.json         |   1 +
 .../Bambu PETG-CF @BBL A1 0.4 nozzle.json     |   6 +
 .../Bambu PETG-CF @BBL A1 0.8 nozzle.json     |   6 +
 .../BBL/filament/Bambu PETG-CF @BBL A1M.json  |   6 +
 .../Bambu PETG-CF @BBL X1C 0.4 nozzle.json    |   6 +
 .../BBL/filament/Bambu PETG-CF @BBL X1C.json  |   6 +
 .../BBL/filament/Bambu PLA Aero @base.json    |  14 +-
 .../Bambu PLA Basic @BBL A1 0.2 nozzle.json   |   6 +
 .../BBL/filament/Bambu PLA Basic @BBL A1.json |   6 +
 .../Bambu PLA Basic @BBL A1M 0.2 nozzle.json  |   6 +
 .../filament/Bambu PLA Basic @BBL A1M.json    |   6 +
 .../BBL/filament/Bambu PLA Basic @base.json   |  13 ++
 .../Bambu PLA Galaxy @BBL A1 0.2 nozzle.json  |   6 +
 .../filament/Bambu PLA Galaxy @BBL A1.json    |   6 +
 .../Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json |   6 +
 .../filament/Bambu PLA Galaxy @BBL A1M.json   |   6 +
 .../Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json |   6 +
 .../filament/Bambu PLA Galaxy @BBL P1P.json   |   6 +
 .../Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json |   6 +
 .../Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json |   6 +
 .../filament/Bambu PLA Galaxy @BBL X1C.json   |   6 +
 .../Bambu PLA Glow @BBL A1 0.2 nozzle.json    |   6 +
 .../BBL/filament/Bambu PLA Glow @BBL A1.json  |   6 +
 .../BBL/filament/Bambu PLA Glow @BBL P1P.json |   6 +
 .../BBL/filament/Bambu PLA Glow @BBL X1.json  |   6 +
 .../BBL/filament/Bambu PLA Glow @BBL X1C.json |   6 +
 .../BBL/filament/Bambu PLA Glow @BBL X1E.json |   6 +
 .../filament/Bambu PLA Marble @BBL A1.json    |   6 +
 .../filament/Bambu PLA Marble @BBL A1M.json   |   6 +
 .../filament/Bambu PLA Marble @BBL X1.json    |   6 +
 .../filament/Bambu PLA Marble @BBL X1C.json   |   6 +
 .../Bambu PLA Matte @BBL A1 0.2 nozzle.json   |   6 +
 .../BBL/filament/Bambu PLA Matte @BBL A1.json |   6 +
 .../Bambu PLA Matte @BBL A1M 0.2 nozzle.json  |   6 +
 .../filament/Bambu PLA Matte @BBL A1M.json    |   6 +
 .../BBL/filament/Bambu PLA Matte @BBL X1.json |   6 +
 .../Bambu PLA Matte @BBL X1C 0.2 nozzle.json  |   6 +
 .../Bambu PLA Matte @BBL X1C 0.8 nozzle.json  |   6 +
 .../filament/Bambu PLA Matte @BBL X1C.json    |   6 +
 .../BBL/filament/Bambu PLA Matte @base.json   |  12 ++
 .../BBL/filament/Bambu PLA Metal @base.json   |   4 +
 .../BBL/filament/Bambu PLA Silk @base.json    |  13 ++
 .../BBL/filament/Bambu PLA Tough @base.json   |   3 +
 .../Bambu PLA-CF @BBL A1 0.8 nozzle.json      |   6 +
 .../BBL/filament/Bambu PLA-CF @BBL A1.json    |   6 +
 .../Bambu PLA-CF @BBL A1M 0.8 nozzle.json     |   6 +
 .../BBL/filament/Bambu PLA-CF @BBL A1M.json   |   6 +
 .../Bambu PLA-CF @BBL X1C 0.8 nozzle.json     |   6 +
 .../BBL/filament/Bambu PLA-CF @BBL X1C.json   |   6 +
 .../BBL/filament/Bambu PLA-CF @base.json      |  12 +-
 .../BBL/filament/Bambu PPS-CF @base.json      |   4 +-
 .../BBL/filament/Bambu PVA @base.json         |   1 +
 .../Bambu Support For PA PET @base.json       |  21 +--
 .../filament/Bambu Support For PLA @base.json |   4 +
 ...pport For PLA-PETG @BBL A1 0.2 nozzle.json |   6 +
 .../Bambu Support For PLA-PETG @BBL A1.json   |   6 +
 ...port For PLA-PETG @BBL A1M 0.2 nozzle.json |   6 +
 .../Bambu Support For PLA-PETG @BBL A1M.json  |   6 +
 ...port For PLA-PETG @BBL P1P 0.2 nozzle.json |   6 +
 .../Bambu Support For PLA-PETG @BBL P1P.json  |   6 +
 ...port For PLA-PETG @BBL X1C 0.2 nozzle.json |   6 +
 .../Bambu Support For PLA-PETG @BBL X1C.json  |   6 +
 .../Bambu Support For PLA-PETG @base.json     |   7 +
 .../BBL/filament/Bambu Support G @base.json   |  24 ++--
 .../BBL/filament/Bambu Support W @base.json   |   4 +
 .../Bambu Support for ABS @BBL A1.json        |   6 +
 .../Bambu Support for ABS @BBL X1C.json       |   6 +
 .../filament/Bambu Support for ABS @base.json |   4 +
 .../BBL/filament/Bambu TPU 95A @base.json     |  15 +-
 .../BBL/filament/Bambu TPU 95A HF @base.json  |   1 +
 .../filament/Bambu TPU for AMS @BBL A1.json   |  13 ++
 .../filament/Bambu TPU for AMS @BBL A1M.json  |  13 ++
 .../filament/Bambu TPU for AMS @BBL P1P.json  |  16 +++
 .../filament/Bambu TPU for AMS @BBL X1C.json  |  19 +++
 .../BBL/filament/Bambu TPU for AMS @base.json |  54 ++++++++
 .../filament/Fiberon PA12-CF @BBL X1C.json    |  16 +++
 .../BBL/filament/Fiberon PA12-CF @base.json   |  71 ++++++++++
 .../BBL/filament/Fiberon PA6-CF @BBL X1C.json |  16 +++
 .../BBL/filament/Fiberon PA6-CF @base.json    |  68 +++++++++
 .../BBL/filament/Fiberon PA6-GF @BBL X1C.json |  16 +++
 .../BBL/filament/Fiberon PA6-GF @base.json    |  71 ++++++++++
 .../filament/Fiberon PA612-CF @BBL X1C.json   |  16 +++
 .../BBL/filament/Fiberon PA612-CF @base.json  |  41 ++++++
 .../BBL/filament/Fiberon PET-CF @BBL X1C.json |  16 +++
 .../BBL/filament/Fiberon PET-CF @base.json    |  89 ++++++++++++
 .../filament/Fiberon PETG-ESD @BBL X1C.json   |  19 +++
 .../BBL/filament/Fiberon PETG-ESD @base.json  |  77 +++++++++++
 .../filament/Fiberon PETG-rCF @BBL X1C.json   |  16 +++
 .../BBL/filament/Fiberon PETG-rCF @base.json  |  80 +++++++++++
 .../BBL/filament/Generic ABS @base.json       |   1 +
 .../BBL/filament/Generic ASA @base.json       |   1 +
 .../BBL/filament/Generic EVA @base.json       |   3 -
 .../profiles/BBL/filament/Generic PA-CF.json  |   1 +
 .../profiles/BBL/filament/Generic PA.json     |   1 +
 .../BBL/filament/Generic PC @base.json        |   7 +-
 .../Generic PETG HF @BBL A1 0.2 nozzle.json   |  14 ++
 .../BBL/filament/Generic PETG HF @BBL A1.json |  13 ++
 .../Generic PETG HF @BBL A1M 0.2 nozzle.json  |  11 ++
 .../filament/Generic PETG HF @BBL A1M.json    |  13 ++
 .../Generic PETG HF @BBL P1P 0.2 nozzle.json  |  14 ++
 .../filament/Generic PETG HF @BBL P1P.json    |  13 ++
 .../Generic PETG HF @BBL X1C 0.2 nozzle.json  |  17 +++
 .../filament/Generic PETG HF @BBL X1C.json    |  22 +++
 .../BBL/filament/Generic PETG HF @base.json   |  71 ++++++++++
 .../BBL/filament/Generic PETG-CF @base.json   |   6 -
 .../BBL/filament/Generic PLA @base.json       |   1 +
 .../BBL/filament/Generic PLA Silk @base.json  |   7 +
 .../BBL/filament/Generic PLA-CF @base.json    |   6 +
 .../BBL/filament/Generic PPA-CF @base.json    |   4 +-
 .../BBL/filament/Generic PPS-CF @base.json    |  10 +-
 .../BBL/filament/Generic PVA @base.json       |   1 +
 .../filament/Generic TPU for AMS @BBL A1.json |  28 ++++
 .../Generic TPU for AMS @BBL A1M.json         |  28 ++++
 .../Generic TPU for AMS @BBL P1P.json         |  31 +++++
 .../Generic TPU for AMS @BBL X1C.json         |  34 +++++
 .../filament/Generic TPU for AMS @base.json   |  30 ++++
 .../profiles/BBL/filament/Generic TPU.json    |   1 +
 .../P1P/Bambu ABS @BBL P1P 0.2 nozzle.json    |   6 +
 .../BBL/filament/P1P/Bambu ABS @BBL P1P.json  |   6 +
 .../Bambu PETG-CF @BBL P1P 0.4 nozzle.json    |   6 +
 .../filament/P1P/Bambu PETG-CF @BBL P1P.json  |   6 +
 .../P1P/Bambu PLA Marble @BBL P1P.json        |   6 +
 .../Bambu PLA Matte @BBL P1P 0.2 nozzle.json  |   6 +
 .../P1P/Bambu PLA Matte @BBL P1P.json         |   6 +
 .../P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json |   6 +
 .../filament/P1P/Bambu PLA-CF @BBL P1P.json   |   6 +
 .../BBL/filament/P1P/Generic PA @BBL P1P.json |   1 +
 .../filament/P1P/Generic PA-CF @BBL P1P.json  |   1 +
 .../filament/P1P/Generic TPU @BBL P1P.json    |   1 +
 .../BBL/filament/fdm_filament_abs.json        |   6 +
 .../BBL/filament/fdm_filament_asa.json        |   6 +
 .../BBL/filament/fdm_filament_bvoh.json       |   6 +
 .../BBL/filament/fdm_filament_common.json     |  21 +++
 .../BBL/filament/fdm_filament_eva.json        |   6 +
 .../BBL/filament/fdm_filament_hips.json       |   6 +
 .../BBL/filament/fdm_filament_pa.json         |   6 +
 .../BBL/filament/fdm_filament_pc.json         |   6 +
 .../BBL/filament/fdm_filament_pctg.json       | 130 +++++++++---------
 .../BBL/filament/fdm_filament_pe.json         |   6 +
 .../BBL/filament/fdm_filament_pet.json        |   6 +
 .../BBL/filament/fdm_filament_pha.json        |   6 +
 .../BBL/filament/fdm_filament_pla.json        |  86 ++++++------
 .../BBL/filament/fdm_filament_pp.json         |   6 +
 .../BBL/filament/fdm_filament_ppa.json        |   6 +
 .../BBL/filament/fdm_filament_pps.json        |   6 +
 .../BBL/filament/fdm_filament_pva.json        |   6 +
 .../BBL/filament/fdm_filament_tpu.json        |   6 +
 .../BBL/machine/Bambu Lab A1 0.4 nozzle.json  |   3 +-
 .../machine/Bambu Lab A1 mini 0.4 nozzle.json |   3 +-
 .../BBL/machine/Bambu Lab P1P 0.4 nozzle.json |   2 +-
 .../BBL/machine/Bambu Lab P1S 0.4 nozzle.json |   1 -
 .../BBL/machine/Bambu Lab X1 0.2 nozzle.json  |   2 +-
 .../BBL/machine/Bambu Lab X1 0.4 nozzle.json  |   3 +-
 .../BBL/machine/Bambu Lab X1 0.6 nozzle.json  |   2 +-
 .../BBL/machine/Bambu Lab X1 0.8 nozzle.json  |   2 +-
 .../Bambu Lab X1 Carbon 0.2 nozzle.json       |   2 +-
 .../Bambu Lab X1 Carbon 0.4 nozzle.json       |   3 +-
 .../Bambu Lab X1 Carbon 0.6 nozzle.json       |   2 +-
 .../Bambu Lab X1 Carbon 0.8 nozzle.json       |   2 +-
 .../BBL/machine/Bambu Lab X1E 0.4 nozzle.json |   2 +-
 .../BBL/machine/fdm_machine_common.json       |   7 +-
 .../0.10mm Standard @BBL P1P 0.2 nozzle.json  |   3 +-
 .../fdm_process_bbl_0.06_nozzle_0.2.json      |   1 +
 .../fdm_process_bbl_0.08_nozzle_0.2.json      |   1 +
 .../fdm_process_bbl_0.10_nozzle_0.2.json      |   1 +
 .../fdm_process_bbl_0.12_nozzle_0.2.json      |   1 +
 .../fdm_process_bbl_0.14_nozzle_0.2.json      |   1 +
 .../fdm_process_bbl_0.18_nozzle_0.6.json      |   1 +
 .../fdm_process_bbl_0.24_nozzle_0.6.json      |   1 +
 .../fdm_process_bbl_0.24_nozzle_0.8.json      |   1 +
 .../fdm_process_bbl_0.30_nozzle_0.6.json      |   1 +
 .../fdm_process_bbl_0.32_nozzle_0.8.json      |   1 +
 .../fdm_process_bbl_0.36_nozzle_0.6.json      |   1 +
 .../fdm_process_bbl_0.40_nozzle_0.8.json      |   1 +
 .../fdm_process_bbl_0.42_nozzle_0.6.json      |   1 +
 .../fdm_process_bbl_0.48_nozzle_0.8.json      |   1 +
 .../fdm_process_bbl_0.56_nozzle_0.8.json      |   1 +
 .../BBL/process/fdm_process_bbl_common.json   |   1 +
 .../BBL/process/fdm_process_common.json       |   4 +-
 231 files changed, 2257 insertions(+), 221 deletions(-)
 create mode 100644 resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json
 create mode 100644 resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1.json
 create mode 100644 resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json
 create mode 100644 resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P.json
 create mode 100644 resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json
 create mode 100644 resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Bambu ASA-CF @base.json
 create mode 100644 resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1.json
 create mode 100644 resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1M.json
 create mode 100644 resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P1P.json
 create mode 100644 resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Bambu TPU for AMS @base.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PA12-CF @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PA12-CF @base.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PA6-CF @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PA6-CF @base.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PA6-GF @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PA6-GF @base.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PA612-CF @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PA612-CF @base.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PET-CF @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PET-CF @base.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PETG-ESD @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PETG-ESD @base.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PETG-rCF @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PETG-rCF @base.json
 create mode 100644 resources/profiles/BBL/filament/Generic PETG HF @BBL A1 0.2 nozzle.json
 create mode 100644 resources/profiles/BBL/filament/Generic PETG HF @BBL A1.json
 create mode 100644 resources/profiles/BBL/filament/Generic PETG HF @BBL A1M 0.2 nozzle.json
 create mode 100644 resources/profiles/BBL/filament/Generic PETG HF @BBL A1M.json
 create mode 100644 resources/profiles/BBL/filament/Generic PETG HF @BBL P1P 0.2 nozzle.json
 create mode 100644 resources/profiles/BBL/filament/Generic PETG HF @BBL P1P.json
 create mode 100644 resources/profiles/BBL/filament/Generic PETG HF @BBL X1C 0.2 nozzle.json
 create mode 100644 resources/profiles/BBL/filament/Generic PETG HF @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Generic PETG HF @base.json
 create mode 100644 resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1.json
 create mode 100644 resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1M.json
 create mode 100644 resources/profiles/BBL/filament/Generic TPU for AMS @BBL P1P.json
 create mode 100644 resources/profiles/BBL/filament/Generic TPU for AMS @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Generic TPU for AMS @base.json

diff --git a/resources/profiles/BBL/cli_config.json b/resources/profiles/BBL/cli_config.json
index 2bd68647c91..7c75b738d83 100644
--- a/resources/profiles/BBL/cli_config.json
+++ b/resources/profiles/BBL/cli_config.json
@@ -75,80 +75,100 @@
 		"Bambu Lab X1": {
 			"downward_check": {
 				"Bambu Lab X1 0.2 nozzle": [
-					"Bambu Lab A1 mini 0.2 nozzle"
+					"Bambu Lab A1 mini 0.2 nozzle",
+					"Bambu Lab A1 0.2 nozzle"
 				],
 				"Bambu Lab X1 0.4 nozzle": [
-					"Bambu Lab A1 mini 0.4 nozzle"
+					"Bambu Lab A1 mini 0.4 nozzle",
+					"Bambu Lab A1 0.4 nozzle"
 				],
 				"Bambu Lab X1 0.6 nozzle": [
-					"Bambu Lab A1 mini 0.6 nozzle"
+					"Bambu Lab A1 mini 0.6 nozzle",
+					"Bambu Lab A1 0.6 nozzle"
 				],
 				"Bambu Lab X1 0.8 nozzle": [
-					"Bambu Lab A1 mini 0.8 nozzle"
+					"Bambu Lab A1 mini 0.8 nozzle",
+					"Bambu Lab A1 0.8 nozzle"
 				]
 			}
 		},
 		"Bambu Lab X1 Carbon": {
 			"downward_check": {
 				"Bambu Lab X1 Carbon 0.2 nozzle": [
-					"Bambu Lab A1 mini 0.2 nozzle"
+					"Bambu Lab A1 mini 0.2 nozzle",
+					"Bambu Lab A1 0.2 nozzle"
 				],
 				"Bambu Lab X1 Carbon 0.4 nozzle": [
-					"Bambu Lab A1 mini 0.4 nozzle"
+					"Bambu Lab A1 mini 0.4 nozzle",
+					"Bambu Lab A1 0.4 nozzle"
 				],
 				"Bambu Lab X1 Carbon 0.6 nozzle": [
-					"Bambu Lab A1 mini 0.6 nozzle"
+					"Bambu Lab A1 mini 0.6 nozzle",
+					"Bambu Lab A1 0.6 nozzle"
 				],
 				"Bambu Lab X1 Carbon 0.8 nozzle": [
-					"Bambu Lab A1 mini 0.8 nozzle"
+					"Bambu Lab A1 mini 0.8 nozzle",
+					"Bambu Lab A1 0.8 nozzle"
 				]
 			}
 		},
 		"Bambu Lab X1E": {
 			"downward_check": {
 				"Bambu Lab X1E 0.2 nozzle": [
-					"Bambu Lab A1 mini 0.2 nozzle"
+					"Bambu Lab A1 mini 0.2 nozzle",
+					"Bambu Lab A1 0.2 nozzle"
 				],
 				"Bambu Lab X1E 0.4 nozzle": [
-					"Bambu Lab A1 mini 0.4 nozzle"
+					"Bambu Lab A1 mini 0.4 nozzle",
+					"Bambu Lab A1 0.4 nozzle"
 				],
 				"Bambu Lab X1E 0.6 nozzle": [
-					"Bambu Lab A1 mini 0.6 nozzle"
+					"Bambu Lab A1 mini 0.6 nozzle",
+					"Bambu Lab A1 0.6 nozzle"
 				],
 				"Bambu Lab X1E 0.8 nozzle": [
-					"Bambu Lab A1 mini 0.8 nozzle"
+					"Bambu Lab A1 mini 0.8 nozzle",
+					"Bambu Lab A1 0.8 nozzle"
 				]
 			}
 		},
 		"Bambu Lab P1P": {
 			"downward_check": {
 				"Bambu Lab P1P 0.2 nozzle": [
-					"Bambu Lab A1 mini 0.2 nozzle"
+					"Bambu Lab A1 mini 0.2 nozzle",
+					"Bambu Lab A1 0.2 nozzle"
 				],
 				"Bambu Lab P1P 0.4 nozzle": [
-					"Bambu Lab A1 mini 0.4 nozzle"
+					"Bambu Lab A1 mini 0.4 nozzle",
+					"Bambu Lab A1 0.4 nozzle"
 				],
 				"Bambu Lab P1P 0.6 nozzle": [
-					"Bambu Lab A1 mini 0.6 nozzle"
+					"Bambu Lab A1 mini 0.6 nozzle",
+					"Bambu Lab A1 0.6 nozzle"
 				],
 				"Bambu Lab P1P 0.8 nozzle": [
-					"Bambu Lab A1 mini 0.8 nozzle"
+					"Bambu Lab A1 mini 0.8 nozzle",
+					"Bambu Lab A1 0.8 nozzle"
 				]
 			}
 		},
 		"Bambu Lab P1S": {
 			"downward_check": {
 				"Bambu Lab P1S 0.2 nozzle": [
-					"Bambu Lab A1 mini 0.2 nozzle"
+					"Bambu Lab A1 mini 0.2 nozzle",
+					"Bambu Lab A1 0.2 nozzle"
 				],
 				"Bambu Lab P1S 0.4 nozzle": [
-					"Bambu Lab A1 mini 0.4 nozzle"
+					"Bambu Lab A1 mini 0.4 nozzle",
+					"Bambu Lab A1 0.4 nozzle"
 				],
 				"Bambu Lab P1S 0.6 nozzle": [
-					"Bambu Lab A1 mini 0.6 nozzle"
+					"Bambu Lab A1 mini 0.6 nozzle",
+					"Bambu Lab A1 0.6 nozzle"
 				],
 				"Bambu Lab P1S 0.8 nozzle": [
-					"Bambu Lab A1 mini 0.8 nozzle"
+					"Bambu Lab A1 mini 0.8 nozzle",
+					"Bambu Lab A1 0.8 nozzle"
 				]
 			}
 		}
diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json
index 413d8ce7958..3282b698e73 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json	
@@ -8,9 +8,15 @@
     "fan_max_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL A1.json b/resources/profiles/BBL/filament/Bambu ABS @BBL A1.json
index f85009c07bb..6d34d11f229 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL A1.json	
@@ -8,9 +8,15 @@
     "fan_max_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "16"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json
index f21efe7f800..ae2331a947d 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json	
@@ -8,9 +8,15 @@
     "fan_max_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "slow_down_layer_time": [
         "12"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json
index 6145a910b61..fa8c04cf9fb 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json	
@@ -8,9 +8,15 @@
     "fan_max_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "nozzle_temperature": [
         "260"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json
index 88ad1a408f9..cef6534784d 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json	
@@ -8,9 +8,15 @@
     "fan_max_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "16"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "slow_down_layer_time": [
         "12"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ABS @base.json b/resources/profiles/BBL/filament/Bambu ABS @base.json
index a185e7cf80c..f5d8680b063 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @base.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @base.json	
@@ -5,12 +5,13 @@
     "from": "system",
     "filament_id": "GFB00",
     "instantiation": "false",
-    "filament_flow_ratio": [
-        "0.95"
-    ],
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "filament_cost": [
         "24.99"
     ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
     "filament_vendor": [
         "Bambu Lab"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json
index ff5f41cae78..aee4e52a016 100644
--- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSB50_02",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab A1 0.4 nozzle",
         "Bambu Lab A1 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json
index 37acd12522d..8a51aedb7e7 100644
--- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSB50_01",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab P1P 0.8 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json
index 89916b17b3a..173f63007d7 100644
--- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSB50_00",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab P1S 0.4 nozzle",
         "Bambu Lab P1S 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @base.json b/resources/profiles/BBL/filament/Bambu ABS-GF @base.json
index 777cf850801..a67aa45465b 100644
--- a/resources/profiles/BBL/filament/Bambu ABS-GF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS-GF @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFB50",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "fan_cooling_layer_time": [
         "12"
     ],
@@ -17,15 +18,15 @@
     "filament_density": [
         "1.08"
     ],
-    "filament_type": [
-        "ABS-GF"
-    ],
     "filament_flow_ratio": [
         "0.95"
     ],
     "filament_max_volumetric_speed": [
         "12"
     ],
+    "filament_type": [
+        "ABS-GF"
+    ],
     "filament_vendor": [
         "Bambu Lab"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json
index e67d7d90e00..52d1c45a6b0 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSB01_10",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab A1 0.2 nozzle"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json
index 9c92e7653b7..97017c4fa3a 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json	
@@ -8,6 +8,12 @@
     "chamber_temperatures": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab A1 0.4 nozzle"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json
index 916abbfbe39..8aa9d6f38b8 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json	
@@ -8,6 +8,12 @@
     "fan_min_speed": [
         "25"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab A1 0.6 nozzle",
         "Bambu Lab A1 0.8 nozzle"
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json
index 90b80ac8dc4..954cdc9ff2c 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSB01_03",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 0.2 nozzle"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json
index 5e6a6788c3f..144df72be9e 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json	
@@ -8,6 +8,12 @@
     "fan_min_speed": [
         "25"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "filament_retraction_speed": [
         "0.4"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json
index 1253bff71f7..5264f9d6de2 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSB01_01",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab P1S 0.2 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json
index b3c53e095c3..6a8a891f257 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json	
@@ -8,6 +8,12 @@
     "chamber_temperatures": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab P1S 0.4 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json
index 4c9c47f1a3c..db44041c73a 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json	
@@ -8,6 +8,12 @@
     "fan_min_speed": [
         "25"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu ASA @base.json b/resources/profiles/BBL/filament/Bambu ASA @base.json
index 7ae30500d90..6850e938f65 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @base.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFB01",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "fan_max_speed": [
         "35"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json
index f469aeebc67..4cfe7de309a 100644
--- a/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFB02",
     "instantiation": "false",
+    "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: ASA Aero Printing Guide.",
     "fan_cooling_layer_time": [
         "30"
     ],
@@ -26,9 +27,6 @@
     "filament_max_volumetric_speed": [
         "12"
     ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
     "filament_retraction_length": [
         "1.5"
     ],
@@ -58,5 +56,8 @@
     ],
     "slow_down_layer_time": [
         "5"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json
new file mode 100644
index 00000000000..442f2b6230e
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA-CF @BBL A1 0.6 nozzle",
+    "inherits": "Bambu ASA-CF @base",
+    "from": "system",
+    "setting_id": "GFSB51_05",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1.json
new file mode 100644
index 00000000000..70c164accf2
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1.json	
@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA-CF @BBL A1",
+    "inherits": "Bambu ASA-CF @base",
+    "from": "system",
+    "setting_id": "GFSB51_04",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json
new file mode 100644
index 00000000000..0d038bb515e
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA-CF @BBL P1P 0.6 nozzle",
+    "inherits": "Bambu ASA-CF @base",
+    "from": "system",
+    "setting_id": "GFSB51_03",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab P1P 0.6 nozzle",
+        "Bambu Lab P1P 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P.json
new file mode 100644
index 00000000000..7c19ff98065
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P.json	
@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA-CF @BBL P1P",
+    "inherits": "Bambu ASA-CF @base",
+    "from": "system",
+    "setting_id": "GFSB51_02",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab P1P 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json
new file mode 100644
index 00000000000..44c110b6353
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA-CF @BBL X1C 0.6 nozzle",
+    "inherits": "Bambu ASA-CF @base",
+    "from": "system",
+    "setting_id": "GFSB51_01",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab X1E 0.6 nozzle",
+        "Bambu Lab X1E 0.8 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C.json
new file mode 100644
index 00000000000..a65d70b6f39
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C.json	
@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA-CF @BBL X1C",
+    "inherits": "Bambu ASA-CF @base",
+    "from": "system",
+    "setting_id": "GFSB51_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab X1E 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @base.json b/resources/profiles/BBL/filament/Bambu ASA-CF @base.json
new file mode 100644
index 00000000000..b280a21659b
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu ASA-CF @base.json	
@@ -0,0 +1,44 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA-CF @base",
+    "inherits": "fdm_filament_asa",
+    "from": "system",
+    "filament_id": "GFB51",
+    "instantiation": "false",
+    "fan_max_speed": [
+        "25"
+    ],
+    "filament_cost": [
+        "36.99"
+    ],
+    "filament_density": [
+        "1.02"
+    ],
+    "filament_flow_ratio": [
+        "0.9"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "filament_type": [
+        "ASA-CF"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "nozzle_temperature": [
+        "275"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "275"
+    ],
+    "nozzle_temperature_range_low": [
+        "250"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "temperature_vitrification": [
+        "108"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @base.json b/resources/profiles/BBL/filament/Bambu PA-CF @base.json
index 2788ee1bdce..f278ca567b9 100644
--- a/resources/profiles/BBL/filament/Bambu PA-CF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PA-CF @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFN03",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "filament_cost": [
         "84.99"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @base.json b/resources/profiles/BBL/filament/Bambu PA6-CF @base.json
index 190e61093e9..7df1f06e4ac 100644
--- a/resources/profiles/BBL/filament/Bambu PA6-CF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PA6-CF @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFN05",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "fan_cooling_layer_time": [
         "5"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @base.json b/resources/profiles/BBL/filament/Bambu PA6-GF @base.json
index 24a6fa15b06..e2246b0cab5 100644
--- a/resources/profiles/BBL/filament/Bambu PA6-GF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PA6-GF @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFN08",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "fan_cooling_layer_time": [
         "5"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json
index 0f5dcfb745c..17ef39575f0 100644
--- a/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json	
@@ -5,20 +5,18 @@
     "from": "system",
     "filament_id": "GFN04",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+    "fan_cooling_layer_time": [
+        "5"
+    ],
     "fan_max_speed": [
         "30"
     ],
     "fan_min_speed": [
         "10"
     ],
-    "fan_cooling_layer_time": [
-        "5"
-    ],
-    "full_fan_speed_layer": [
-        "2"
-    ],
-    "filament_vendor": [
-        "Bambu Lab"
+    "filament_cost": [
+        "94.99"
     ],
     "filament_density": [
         "1.06"
@@ -26,17 +24,20 @@
     "filament_flow_ratio": [
         "0.96"
     ],
-    "overhang_fan_threshold": [
-        "0%"
+    "filament_type": [
+        "PA-CF"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "full_fan_speed_layer": [
+        "2"
     ],
     "overhang_fan_speed": [
         "40"
     ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_cost": [
-        "94.99"
+    "overhang_fan_threshold": [
+        "0%"
     ],
     "temperature_vitrification": [
         "180"
diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @base.json b/resources/profiles/BBL/filament/Bambu PET-CF @base.json
index 9cfc605c328..fd0c71af6c8 100644
--- a/resources/profiles/BBL/filament/Bambu PET-CF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PET-CF @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFT01",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "cool_plate_temp": [
         "0"
     ],
@@ -68,6 +69,12 @@
     "required_nozzle_HRC": [
         "40"
     ],
+    "supertack_plate_temp": [
+        "80"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "80"
+    ],
     "slow_down_layer_time": [
         "2"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json
index 6553473d1bd..97d7a7cd1a1 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json	
@@ -8,6 +8,12 @@
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "nil"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "nil"
+    ],
     "compatible_printers": [
         "Bambu Lab A1 mini 0.2 nozzle"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json
index 837e060fe54..58b35890a91 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json	
@@ -8,9 +8,15 @@
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "nil"
+    ],
     "filament_max_volumetric_speed": [
         "9"
     ],
+    "filament_retraction_distances_when_cut": [
+        "nil"
+    ],
     "compatible_printers": [
         "Bambu Lab A1 mini 0.4 nozzle"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json
index e3d66863c0e..73cc2e96331 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json	
@@ -8,9 +8,15 @@
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "nil"
+    ],
     "filament_max_volumetric_speed": [
         "12"
     ],
+    "filament_retraction_distances_when_cut": [
+        "nil"
+    ],
     "compatible_printers": [
         "Bambu Lab A1 mini 0.6 nozzle",
         "Bambu Lab A1 mini 0.8 nozzle"
diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @base.json b/resources/profiles/BBL/filament/Bambu PETG Basic @base.json
index b187cac1922..801cab4aae4 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Basic @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Basic @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFG00",
     "instantiation": "false",
+    "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
     "cool_plate_temp": [
         "0"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json
index 7335bcaffe0..23c674f620c 100644
--- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json	
@@ -17,9 +17,15 @@
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "1"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "nozzle_temperature": [
         "240"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json
index a4db6b85bd2..6c52c255e8a 100644
--- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json	
@@ -17,9 +17,15 @@
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "nozzle_temperature": [
         "240"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json
index 2a9f8a264c1..5b972849de5 100644
--- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json	
@@ -17,9 +17,15 @@
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "nozzle_temperature": [
         "240"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json
index 17106138f6c..bad6f79415b 100644
--- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json	
@@ -17,9 +17,15 @@
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "1"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "nozzle_temperature": [
         "240"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json
index 2d3ea73731f..df1eab07543 100644
--- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json	
@@ -17,9 +17,15 @@
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "nozzle_temperature": [
         "240"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json
index f6d16e8d475..d3ebff57e84 100644
--- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json	
@@ -17,9 +17,15 @@
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "nozzle_temperature": [
         "240"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json
index b0d8d373744..72f3a64f357 100644
--- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "1"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "overhang_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json
index 44193c3c433..145f98d1ff6 100644
--- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json	
@@ -11,6 +11,12 @@
     "fan_min_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "overhang_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json
index c02f8e26099..d31822c6d73 100644
--- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json	
@@ -11,6 +11,12 @@
     "fan_min_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "overhang_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json
index fc6643dfc6c..d79bd3b578a 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "16"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "filament_retraction_length": [
         "0.2"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1.json
index fd65b8f27af..4cf239e1447 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSG01_05",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "filament_retraction_length": [
         "0.3"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json
index 5785e725ca1..864884dad1e 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "16"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "filament_retraction_length": [
         "0.2"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M.json
index fc1271284b0..ad1111fdaa4 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSG01_02",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "filament_retraction_length": [
         "0.3"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json
index 39a4bfb3f8c..eafc44f3b5e 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "16"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "filament_retraction_length": [
         "0.2"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C.json
index 386ef5eab80..830dab5dea0 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSG01_00",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "filament_retraction_length": [
         "0.3"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json
index 174052635cd..f2569d5f399 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFG01",
     "instantiation": "false",
+    "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
     "cool_plate_temp": [
         "0"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.4 nozzle.json
index 47f54f981dd..4ad1c374178 100644
--- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.4 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "5"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "9"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "overhang_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.8 nozzle.json
index ad7db31ffbd..edf85380a3e 100644
--- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.8 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "5"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "9"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "overhang_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json
index 6c7b97ce7b6..7852889288c 100644
--- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSG50_00",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "9"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "textured_plate_temp_initial_layer": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json
index d0ea93c38c7..41f1bc333e0 100644
--- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "5"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "11.5"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "overhang_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json
index 8d0e7ce354e..42e23219c51 100644
--- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "5"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "11.5"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "overhang_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @base.json b/resources/profiles/BBL/filament/Bambu PLA Aero @base.json
index 95b26c27968..484a3972702 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Aero @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Aero @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFA11",
     "instantiation": "false",
+    "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: Instructions for printing RC model with foaming PLA (PLA Aero).",
     "fan_min_speed": [
         "30"
     ],
@@ -26,12 +27,21 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
-    "nozzle_temperature_range_high": [
-        "260"
+    "filament_scarf_seam_type": [
+        "none"
     ],
     "nozzle_temperature_range_low": [
         "210"
     ],
+    "nozzle_temperature_range_high": [
+        "260"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1 0.2 nozzle.json
index df3036b34ce..b26ee48d43a 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1 0.2 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1.json
index 4e3b6cc6dc4..fbb03698126 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1.json	
@@ -14,6 +14,12 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json
index 49b44fa936f..f54a464e62f 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json
index 17858789174..23e418b7e03 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json	
@@ -14,6 +14,12 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @base.json b/resources/profiles/BBL/filament/Bambu PLA Basic @base.json
index b975be47dcc..45a5b357901 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @base.json	
@@ -20,6 +20,19 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_scarf_height":[
+        "10%"
+    ],
+    "filament_scarf_gap":[
+        "0%"
+    ],
+    "filament_scarf_length":[
+        "10"
+    ],
+    "compatible_printers": [],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json
index ae4fbb27473..bf0d7a524f0 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json
index d3cb1dfc851..094a7c31ac0 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json	
@@ -14,6 +14,12 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json
index b70fded8638..3f59d61d76d 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json
index c73ef89d00d..1330b7ac74c 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json	
@@ -14,6 +14,12 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json
index b9e85c1d8c7..636518b50e0 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json
index e461af9d498..2ebe013d9a3 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json	
@@ -11,6 +11,12 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json
index 7bb8e8f94b8..0d387ff78c1 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSA15_01",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json
index 43457c192d2..bae2c44be99 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSA15_02",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab P1S 0.8 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json
index d95ffa6a6d9..1a8e719f09a 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSA15_00",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1 0.2 nozzle.json
index 5eae9e1e1ac..8763639cdd3 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1 0.2 nozzle.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "1"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1.json
index b4949148dda..4fa331e1b97 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1.json	
@@ -11,6 +11,12 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P.json
index e162316fd30..198c2bf29ab 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P.json	
@@ -11,6 +11,12 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1.json
index 6f91b4f7faa..c4a3ca7738e 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSA12_08",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C.json
index 5d0c2705a77..abcc9763a40 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSA12_00",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E.json
index 30c339132c9..1bfc1ca5cda 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSA12_04",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1E 0.4 nozzle",
         "Bambu Lab X1E 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1.json
index c4eaac7e47e..1452831345c 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1.json	
@@ -14,6 +14,12 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json
index ebb955bdf04..c53cde99c5c 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json	
@@ -14,6 +14,12 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json
index 20b0a0969e4..a56c168547c 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSA07_01",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json
index 29592f9b4fd..0b9a41dce6f 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSA07_00",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1 0.2 nozzle.json
index 55bcf1e9b0f..a66550291ac 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1 0.2 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1.json
index 7b877ed611c..95e6db95224 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "22"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json
index eb0f819f533..477f128d1c7 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json
index 65403831cbd..8b8d54f422b 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "22"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json
index c0b3df55551..b223ece7144 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSA05",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "22"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json
index 04b51f81041..25a2125b1cb 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSA01_00",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json
index fc0962cd0e2..a4f376d9bba 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSA01_01",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "22"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab P1S 0.8 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json
index 0987393ec65..d1f1969c26d 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSA01",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "22"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @base.json b/resources/profiles/BBL/filament/Bambu PLA Matte @base.json
index 36156e0af82..1550142d46c 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @base.json	
@@ -17,6 +17,18 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_scarf_height":[
+        "5%"
+    ],
+    "filament_scarf_gap":[
+        "0%"
+    ],
+    "filament_scarf_length":[
+        "10"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @base.json b/resources/profiles/BBL/filament/Bambu PLA Metal @base.json
index 77c81e4fb04..986613c9aea 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Metal @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Metal @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFA02",
     "instantiation": "false",
+    "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
     "filament_cost": [
         "29.99"
     ],
@@ -17,6 +18,9 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @base.json b/resources/profiles/BBL/filament/Bambu PLA Silk @base.json
index 642f9396109..e9e66c97eb9 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Silk @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Silk @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFA05",
     "instantiation": "false",
+    "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
     "filament_cost": [
         "29.99"
     ],
@@ -17,12 +18,24 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_scarf_height": [
+        "5%"
+    ],
+    "filament_scarf_gap": [
+        "0%"
+    ],
     "nozzle_temperature": [
         "230"
     ],
     "nozzle_temperature_initial_layer": [
         "230"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @base.json b/resources/profiles/BBL/filament/Bambu PLA Tough @base.json
index 24168d6f136..6268e9d97e2 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Tough @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough @base.json	
@@ -17,6 +17,9 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1 0.8 nozzle.json
index 48fdfde08fd..7b86bec58f7 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1 0.8 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1.json
index f69ce39db1e..f27abc0df2f 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "15"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json
index d22d4de449b..af10570429d 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json
index b976f74eb7d..06b3e679e27 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "15"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json
index 204237570ba..d7a632e1bdf 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSA50_02",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "nozzle_temperature": [
         "230"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json
index 2e4aa2e93ca..6ec63c6a401 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSA50_01",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "15"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "nozzle_temperature": [
         "230"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @base.json b/resources/profiles/BBL/filament/Bambu PLA-CF @base.json
index 3f356ae8655..ac88cc70983 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @base.json	
@@ -29,15 +29,21 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
-    "nozzle_temperature_range_high": [
-        "250"
-    ],
     "nozzle_temperature_range_low": [
         "210"
     ],
+    "nozzle_temperature_range_high": [
+        "250"
+    ],
     "required_nozzle_HRC": [
         "40"
     ],
+    "supertack_plate_temp": [
+        "50"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "50"
+    ],
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PPS-CF @base.json b/resources/profiles/BBL/filament/Bambu PPS-CF @base.json
index 391e986bf72..cef49fe98d2 100644
--- a/resources/profiles/BBL/filament/Bambu PPS-CF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PPS-CF @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFT02",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "fan_max_speed": [
         "30"
     ],
@@ -23,9 +24,6 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
-    "nozzle_temperature_range_high": [
-        "350"
-    ],
     "nozzle_temperature_range_low": [
         "310"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PVA @base.json b/resources/profiles/BBL/filament/Bambu PVA @base.json
index a236f83bd6e..f9396292cfa 100644
--- a/resources/profiles/BBL/filament/Bambu PVA @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PVA @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFS04",
     "instantiation": "false",
+    "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.",
     "filament_cost": [
         "79.98"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json
index 7af6db4c149..3166617d721 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json	
@@ -5,11 +5,12 @@
     "from": "system",
     "filament_id": "GFS03",
     "instantiation": "false",
-    "required_nozzle_HRC": [
-        "3"
+    "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
+    "fan_cooling_layer_time": [
+        "10"
     ],
-    "filament_vendor": [
-        "Bambu Lab"
+    "filament_cost": [
+        "34.99"
     ],
     "filament_density": [
         "1.22"
@@ -17,17 +18,17 @@
     "filament_is_support": [
         "1"
     ],
-    "nozzle_temperature_initial_layer": [
-        "280"
+    "filament_vendor": [
+        "Bambu Lab"
     ],
     "nozzle_temperature": [
         "280"
     ],
-    "fan_cooling_layer_time": [
-        "10"
+    "nozzle_temperature_initial_layer": [
+        "280"
     ],
-    "filament_cost": [
-        "34.99"
+    "required_nozzle_HRC": [
+        "3"
     ],
     "slow_down_layer_time": [
         "6"
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @base.json b/resources/profiles/BBL/filament/Bambu Support For PLA @base.json
index 75179145e6c..7868741daea 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFS02",
     "instantiation": "false",
+    "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
     "cool_plate_temp": [
         "40"
     ],
@@ -23,6 +24,9 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1 0.2 nozzle.json
index 52f12d83edf..db0f6ce2f10 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1 0.2 nozzle.json	
@@ -11,9 +11,15 @@
     "eng_plate_temp_initial_layer": [
         "65"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "0.5"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1.json
index cc081f215f7..e0cb4210a78 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1.json	
@@ -11,6 +11,12 @@
     "eng_plate_temp_initial_layer": [
         "65"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json
index e896919e4ea..90920ebe8cb 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json	
@@ -11,9 +11,15 @@
     "eng_plate_temp_initial_layer": [
         "65"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "0.5"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M.json
index ad2bc888ac9..fcbd1bb645e 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M.json	
@@ -11,6 +11,12 @@
     "eng_plate_temp_initial_layer": [
         "65"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P 0.2 nozzle.json
index 0352dc891a5..5f71f87c3fa 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P 0.2 nozzle.json	
@@ -11,9 +11,15 @@
     "eng_plate_temp_initial_layer": [
         "65"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "0.5"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P.json
index 1f47df1ec9c..3e3db66e03b 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P.json	
@@ -11,6 +11,12 @@
     "eng_plate_temp_initial_layer": [
         "65"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C 0.2 nozzle.json
index fa58a048a76..793ddf06ee6 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C 0.2 nozzle.json	
@@ -11,9 +11,15 @@
     "eng_plate_temp_initial_layer": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "0.5"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab P1S 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C.json
index 8672833ea78..3f210fc5792 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C.json	
@@ -11,6 +11,12 @@
     "eng_plate_temp_initial_layer": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab P1S 0.4 nozzle",
         "Bambu Lab P1S 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json
index 4e628358628..6eae3684bf6 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFS05",
     "instantiation": "false",
+    "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
     "fan_cooling_layer_time": [
         "80"
     ],
@@ -26,6 +27,9 @@
     "filament_max_volumetric_speed": [
         "6"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "filament_vendor": [
         "Bambu Lab"
     ],
@@ -44,6 +48,9 @@
     "slow_down_layer_time": [
         "8"
     ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "textured_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support G @base.json b/resources/profiles/BBL/filament/Bambu Support G @base.json
index 1d72fe95803..7a60603cae0 100644
--- a/resources/profiles/BBL/filament/Bambu Support G @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support G @base.json	
@@ -5,11 +5,12 @@
     "from": "system",
     "filament_id": "GFS01",
     "instantiation": "false",
-    "required_nozzle_HRC": [
-        "3"
+    "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
+    "fan_cooling_layer_time": [
+        "10"
     ],
-    "filament_vendor": [
-        "Bambu Lab"
+    "filament_cost": [
+        "34.99"
     ],
     "filament_density": [
         "1.22"
@@ -17,17 +18,20 @@
     "filament_is_support": [
         "1"
     ],
-    "nozzle_temperature_initial_layer": [
-        "280"
+    "filament_vendor": [
+        "Bambu Lab"
     ],
     "nozzle_temperature": [
         "280"
     ],
-    "fan_cooling_layer_time": [
-        "10"
+    "nozzle_temperature_initial_layer": [
+        "280"
     ],
-    "filament_cost": [
-        "34.99"
+    "required_nozzle_HRC": [
+        "3"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
     ],
     "slow_down_layer_time": [
         "6"
diff --git a/resources/profiles/BBL/filament/Bambu Support W @base.json b/resources/profiles/BBL/filament/Bambu Support W @base.json
index 63f7acebc8d..2b40b44e085 100644
--- a/resources/profiles/BBL/filament/Bambu Support W @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support W @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFS00",
     "instantiation": "false",
+    "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
     "cool_plate_temp": [
         "40"
     ],
@@ -23,6 +24,9 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL A1.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL A1.json
index f0841864961..52655bf9fb3 100644
--- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL A1.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSS06_01",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab A1 0.4 nozzle",
         "Bambu Lab A1 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X1C.json
index 5029095bca5..9ae445e96c4 100644
--- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X1C.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSS06_00",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @base.json b/resources/profiles/BBL/filament/Bambu Support for ABS @base.json
index 506ffa39acf..3bd74d4d960 100644
--- a/resources/profiles/BBL/filament/Bambu Support for ABS @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support for ABS @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFS06",
     "instantiation": "false",
+    "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
     "fan_max_speed": [
         "30"
     ],
@@ -29,6 +30,9 @@
     "slow_down_layer_time": [
         "12"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "temperature_vitrification": [
         "90"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @base.json b/resources/profiles/BBL/filament/Bambu TPU 95A @base.json
index bc1e8393400..eb0555633a3 100644
--- a/resources/profiles/BBL/filament/Bambu TPU 95A @base.json	
+++ b/resources/profiles/BBL/filament/Bambu TPU 95A @base.json	
@@ -5,19 +5,20 @@
     "from": "system",
     "filament_id": "GFU01",
     "instantiation": "false",
-    "filament_vendor": [
-        "Bambu Lab"
+    "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
+    "filament_cost": [
+        "41.99"
     ],
     "filament_density": [
         "1.22"
     ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "filament_cost": [
-        "41.99"
+    "filament_vendor": [
+        "Bambu Lab"
     ],
     "nozzle_temperature": [
         "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json
index 0445791bfc6..6deab30b356 100644
--- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFU00",
     "instantiation": "false",
+    "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
     "filament_cost": [
         "41.99"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1.json
new file mode 100644
index 00000000000..52ed49cee12
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1.json	
@@ -0,0 +1,13 @@
+{
+    "type": "filament",
+    "name": "Bambu TPU for AMS @BBL A1",
+    "inherits": "Bambu TPU for AMS @base",
+    "from": "system",
+    "setting_id": "GFSU02_02",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 0.4 nozzle",
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1M.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1M.json
new file mode 100644
index 00000000000..bff83af130d
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1M.json	
@@ -0,0 +1,13 @@
+{
+    "type": "filament",
+    "name": "Bambu TPU for AMS @BBL A1M",
+    "inherits": "Bambu TPU for AMS @base",
+    "from": "system",
+    "setting_id": "GFSU02_03",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P1P.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P1P.json
new file mode 100644
index 00000000000..3c8c7dad73e
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P1P.json	
@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Bambu TPU for AMS @BBL P1P",
+    "inherits": "Bambu TPU for AMS @base",
+    "from": "system",
+    "setting_id": "GFSU02_01",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab P1P 0.4 nozzle",
+        "Bambu Lab P1P 0.6 nozzle",
+        "Bambu Lab P1P 0.8 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab X1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X1C.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X1C.json
new file mode 100644
index 00000000000..8c7dac662f8
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X1C.json	
@@ -0,0 +1,19 @@
+{
+    "type": "filament",
+    "name": "Bambu TPU for AMS @BBL X1C",
+    "inherits": "Bambu TPU for AMS @base",
+    "from": "system",
+    "setting_id": "GFSU02_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab X1E 0.4 nozzle",
+        "Bambu Lab X1E 0.8 nozzle",
+        "Bambu Lab X1E 0.6 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @base.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @base.json
new file mode 100644
index 00000000000..09d42965065
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @base.json	
@@ -0,0 +1,54 @@
+{
+    "type": "filament",
+    "name": "Bambu TPU for AMS @base",
+    "inherits": "fdm_filament_tpu",
+    "from": "system",
+    "filament_id": "GFU02",
+    "instantiation": "false",
+    "description": "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide.",
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
+    "filament_cost": [
+        "38.99"
+    ],
+    "filament_density": [
+        "1.26"
+    ],
+    "filament_flow_ratio": [
+        "0.97"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "filament_type": [
+        "TPU-AMS"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "220"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PA12-CF @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PA12-CF @BBL X1C.json
new file mode 100644
index 00000000000..06bca8c5f92
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PA12-CF @BBL X1C.json	
@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA12-CF @BBL X1C",
+    "inherits": "Fiberon PA12-CF @base",
+    "from": "system",
+    "setting_id": "GFSL52_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PA12-CF @base.json b/resources/profiles/BBL/filament/Fiberon PA12-CF @base.json
new file mode 100644
index 00000000000..e2a5bf64755
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PA12-CF @base.json	
@@ -0,0 +1,71 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA12-CF @base",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFL52",
+    "instantiation": "false",
+    "eng_plate_temp": [
+        "40"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "40"
+    ],
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "99.99"
+    ],
+    "filament_density": [
+        "1.06"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "14"
+    ],
+    "filament_type": [
+        "PA-CF"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "full_fan_speed_layer": [
+        "2"
+    ],
+    "hot_plate_temp": [
+        "40"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "40"
+    ],
+    "nozzle_temperature": [
+        "300"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "300"
+    ],
+    "nozzle_temperature_range_low": [
+        "260"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "temperature_vitrification": [
+        "131"
+    ],
+    "textured_plate_temp": [
+        "40"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "40"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PA6-CF @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PA6-CF @BBL X1C.json
new file mode 100644
index 00000000000..d10be7532a2
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PA6-CF @BBL X1C.json	
@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA6-CF @BBL X1C",
+    "inherits": "Fiberon PA6-CF @base",
+    "from": "system",
+    "setting_id": "GFSL50_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PA6-CF @base.json b/resources/profiles/BBL/filament/Fiberon PA6-CF @base.json
new file mode 100644
index 00000000000..5027f220967
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PA6-CF @base.json	
@@ -0,0 +1,68 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA6-CF @base",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFL50",
+    "instantiation": "false",
+    "eng_plate_temp": [
+        "40"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "40"
+    ],
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "83.99"
+    ],
+    "filament_density": [
+        "1.17"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "14"
+    ],
+    "filament_type": [
+        "PA6-CF"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "hot_plate_temp": [
+        "40"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "40"
+    ],
+    "nozzle_temperature": [
+        "300"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "300"
+    ],
+    "nozzle_temperature_range_low": [
+        "280"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "temperature_vitrification": [
+        "215"
+    ],
+    "textured_plate_temp": [
+        "40"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "40"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PA6-GF @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PA6-GF @BBL X1C.json
new file mode 100644
index 00000000000..c38dfd17956
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PA6-GF @BBL X1C.json	
@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA6-GF @BBL X1C",
+    "inherits": "Fiberon PA6-GF @base",
+    "from": "system",
+    "setting_id": "GFSL51_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PA6-GF @base.json b/resources/profiles/BBL/filament/Fiberon PA6-GF @base.json
new file mode 100644
index 00000000000..9ab9237e7b2
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PA6-GF @base.json	
@@ -0,0 +1,71 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA6-GF @base",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFL51",
+    "instantiation": "false",
+    "eng_plate_temp": [
+        "40"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "40"
+    ],
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "63.99"
+    ],
+    "filament_density": [
+        "1.2"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PA-GF"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "full_fan_speed_layer": [
+        "2"
+    ],
+    "hot_plate_temp": [
+        "40"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "40"
+    ],
+    "nozzle_temperature": [
+        "300"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "300"
+    ],
+    "nozzle_temperature_range_low": [
+        "280"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "temperature_vitrification": [
+        "191"
+    ],
+    "textured_plate_temp": [
+        "40"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "40"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PA612-CF @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PA612-CF @BBL X1C.json
new file mode 100644
index 00000000000..d91d220575d
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PA612-CF @BBL X1C.json	
@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA612-CF @BBL X1C",
+    "inherits": "Fiberon PA612-CF @base",
+    "from": "system",
+    "setting_id": "GFSL53_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PA612-CF @base.json b/resources/profiles/BBL/filament/Fiberon PA612-CF @base.json
new file mode 100644
index 00000000000..031f9737be5
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PA612-CF @base.json	
@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA612-CF @base",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFL53",
+    "instantiation": "false",
+    "fan_cooling_layer_time": [
+        "5"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "94.99"
+    ],
+    "filament_density": [
+        "1.06"
+    ],
+    "filament_flow_ratio": [
+        "0.96"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "full_fan_speed_layer": [
+        "2"
+    ],
+    "overhang_fan_speed": [
+        "40"
+    ],
+    "overhang_fan_threshold": [
+        "0%"
+    ],
+    "temperature_vitrification": [
+        "180"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PET-CF @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PET-CF @BBL X1C.json
new file mode 100644
index 00000000000..789dddb752d
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PET-CF @BBL X1C.json	
@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Fiberon PET-CF @BBL X1C",
+    "inherits": "Fiberon PET-CF @base",
+    "from": "system",
+    "setting_id": "GFSL54_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PET-CF @base.json b/resources/profiles/BBL/filament/Fiberon PET-CF @base.json
new file mode 100644
index 00000000000..8a6520f1f46
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PET-CF @base.json	
@@ -0,0 +1,89 @@
+{
+    "type": "filament",
+    "name": "Fiberon PET-CF @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFL54",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "242"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "filament_cost": [
+        "89.99"
+    ],
+    "filament_density": [
+        "1.34"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PET-CF"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature": [
+        "300"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "300"
+    ],
+    "nozzle_temperature_range_high": [
+        "300"
+    ],
+    "nozzle_temperature_range_low": [
+        "270"
+    ],
+    "required_nozzle_HRC": [
+        "40"
+    ],
+    "supertack_plate_temp": [
+        "80"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "80"
+    ],
+    "slow_down_layer_time": [
+        "5"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "temperature_vitrification": [
+        "147"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PETG-ESD @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PETG-ESD @BBL X1C.json
new file mode 100644
index 00000000000..0cce20991fc
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PETG-ESD @BBL X1C.json	
@@ -0,0 +1,19 @@
+{
+    "type": "filament",
+    "name": "Fiberon PETG-ESD @BBL X1C",
+    "inherits": "Fiberon PETG-ESD @base",
+    "from": "system",
+    "setting_id": "GFSL06_00",
+    "instantiation": "true",
+    "filament_cost": [
+        "29.99"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PETG-ESD @base.json b/resources/profiles/BBL/filament/Fiberon PETG-ESD @base.json
new file mode 100644
index 00000000000..9f861a724ed
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PETG-ESD @base.json	
@@ -0,0 +1,77 @@
+{
+    "type": "filament",
+    "name": "Fiberon PETG-ESD @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFL06",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "60"
+    ],
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "filament_cost": [
+        "0"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "290"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "290"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "nozzle_temperature_range_low": [
+        "250"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "temperature_vitrification": [
+        "76"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PETG-rCF @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PETG-rCF @BBL X1C.json
new file mode 100644
index 00000000000..790d2565506
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PETG-rCF @BBL X1C.json	
@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Fiberon PETG-rCF @BBL X1C",
+    "inherits": "Fiberon PETG-rCF @base",
+    "from": "system",
+    "setting_id": "GFSL55_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PETG-rCF @base.json b/resources/profiles/BBL/filament/Fiberon PETG-rCF @base.json
new file mode 100644
index 00000000000..aa367e2e2b8
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PETG-rCF @base.json	
@@ -0,0 +1,80 @@
+{
+    "type": "filament",
+    "name": "Fiberon PETG-rCF @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFL55",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "12"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "filament_cost": [
+        "39.99"
+    ],
+    "filament_density": [
+        "1.3"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PETG-CF"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature": [
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "required_nozzle_HRC": [
+        "40"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic ABS @base.json b/resources/profiles/BBL/filament/Generic ABS @base.json
index e41b289fbcf..80a90af9936 100644
--- a/resources/profiles/BBL/filament/Generic ABS @base.json	
+++ b/resources/profiles/BBL/filament/Generic ABS @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFB99",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "filament_flow_ratio": [
         "0.95"
     ],
diff --git a/resources/profiles/BBL/filament/Generic ASA @base.json b/resources/profiles/BBL/filament/Generic ASA @base.json
index 9f80b36f121..148f69f3d06 100644
--- a/resources/profiles/BBL/filament/Generic ASA @base.json	
+++ b/resources/profiles/BBL/filament/Generic ASA @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFB98",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "filament_flow_ratio": [
         "0.95"
     ],
diff --git a/resources/profiles/BBL/filament/Generic EVA @base.json b/resources/profiles/BBL/filament/Generic EVA @base.json
index 6a24cfdba57..7c225320349 100644
--- a/resources/profiles/BBL/filament/Generic EVA @base.json	
+++ b/resources/profiles/BBL/filament/Generic EVA @base.json	
@@ -38,9 +38,6 @@
     "filament_max_volumetric_speed": [
         "12"
     ],
-    "filament_type": [
-        "EVA"
-    ],
     "hot_plate_temp": [
         "55"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PA-CF.json b/resources/profiles/BBL/filament/Generic PA-CF.json
index 5ce9881f823..e229358d4cc 100644
--- a/resources/profiles/BBL/filament/Generic PA-CF.json	
+++ b/resources/profiles/BBL/filament/Generic PA-CF.json	
@@ -6,6 +6,7 @@
     "filament_id": "GFN98",
     "setting_id": "GFSN99",
     "instantiation": "true",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "fan_cooling_layer_time": [
         "5"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PA.json b/resources/profiles/BBL/filament/Generic PA.json
index 6a4f7bf4e2a..d7dd99831f4 100644
--- a/resources/profiles/BBL/filament/Generic PA.json	
+++ b/resources/profiles/BBL/filament/Generic PA.json	
@@ -6,6 +6,7 @@
     "filament_id": "GFN99",
     "setting_id": "GFSN98",
     "instantiation": "true",
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PC @base.json b/resources/profiles/BBL/filament/Generic PC @base.json
index 6c56650bafb..c2a9975e371 100644
--- a/resources/profiles/BBL/filament/Generic PC @base.json	
+++ b/resources/profiles/BBL/filament/Generic PC @base.json	
@@ -5,10 +5,11 @@
     "from": "system",
     "filament_id": "GFC99",
     "instantiation": "false",
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "filament_flow_ratio": [
         "0.94"
+    ],
+    "filament_max_volumetric_speed": [
+        "16"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1 0.2 nozzle.json
new file mode 100644
index 00000000000..099dfcc30a9
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1 0.2 nozzle.json	
@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @BBL A1 0.2 nozzle",
+    "inherits": "Generic PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG96_05",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1.json
new file mode 100644
index 00000000000..d8700688126
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1.json	
@@ -0,0 +1,13 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @BBL A1",
+    "inherits": "Generic PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG96_04",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 0.4 nozzle",
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M 0.2 nozzle.json
new file mode 100644
index 00000000000..0b499781aea
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @BBL A1M 0.2 nozzle",
+    "inherits": "Generic PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG96_07",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M.json
new file mode 100644
index 00000000000..b42117eec90
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M.json	
@@ -0,0 +1,13 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @BBL A1M",
+    "inherits": "Generic PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG96_06",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P 0.2 nozzle.json
new file mode 100644
index 00000000000..ff6131e5156
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P 0.2 nozzle.json	
@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @BBL P1P 0.2 nozzle",
+    "inherits": "Generic PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG96_03",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1P 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P.json
new file mode 100644
index 00000000000..00587abea4f
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P.json	
@@ -0,0 +1,13 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @BBL P1P",
+    "inherits": "Generic PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG96_02",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab P1P 0.4 nozzle",
+        "Bambu Lab P1P 0.6 nozzle",
+        "Bambu Lab P1P 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C 0.2 nozzle.json
new file mode 100644
index 00000000000..963be7b885e
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C 0.2 nozzle.json	
@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @BBL X1C 0.2 nozzle",
+    "inherits": "Generic PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG96_01",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1S 0.2 nozzle",
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab X1 Carbon 0.2 nozzle",
+        "Bambu Lab X1E 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C.json
new file mode 100644
index 00000000000..cdb1a1196c4
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C.json	
@@ -0,0 +1,22 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @BBL X1C",
+    "inherits": "Generic PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG96_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab X1E 0.4 nozzle",
+        "Bambu Lab X1E 0.6 nozzle",
+        "Bambu Lab X1E 0.8 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG HF @base.json b/resources/profiles/BBL/filament/Generic PETG HF @base.json
new file mode 100644
index 00000000000..085538fe911
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG HF @base.json	
@@ -0,0 +1,71 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFG96",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "40"
+    ],
+    "filament_cost": [
+        "24.99"
+    ],
+    "filament_density": [
+        "1.28"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "16"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "overhang_fan_speed": [
+        "90"
+    ],
+    "overhang_fan_threshold": [
+        "10%"
+    ],
+    "slow_down_layer_time": [
+        "25"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @base.json b/resources/profiles/BBL/filament/Generic PETG-CF @base.json
index 4e12feba51e..56909012160 100644
--- a/resources/profiles/BBL/filament/Generic PETG-CF @base.json	
+++ b/resources/profiles/BBL/filament/Generic PETG-CF @base.json	
@@ -38,9 +38,6 @@
     "filament_type": [
         "PETG-CF"
     ],
-    "filament_vendor": [
-        "Generic"
-    ],
     "hot_plate_temp": [
         "70"
     ],
@@ -65,9 +62,6 @@
     "slow_down_layer_time": [
         "6"
     ],
-    "temperature_vitrification": [
-        "70"
-    ],
     "textured_plate_temp": [
         "70"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PLA @base.json b/resources/profiles/BBL/filament/Generic PLA @base.json
index 904cef4daea..bf37d0917e2 100644
--- a/resources/profiles/BBL/filament/Generic PLA @base.json	
+++ b/resources/profiles/BBL/filament/Generic PLA @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFL99",
     "instantiation": "false",
+    "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.",
     "filament_flow_ratio": [
         "0.98"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @base.json b/resources/profiles/BBL/filament/Generic PLA Silk @base.json
index 60ac1d46fa1..03f0c0edcd0 100644
--- a/resources/profiles/BBL/filament/Generic PLA Silk @base.json	
+++ b/resources/profiles/BBL/filament/Generic PLA Silk @base.json	
@@ -5,9 +5,16 @@
     "from": "system",
     "filament_id": "GFL96",
     "instantiation": "false",
+    "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
     "filament_flow_ratio": [
         "0.98"
     ],
+    "supertack_plate_temp": [
+        "35"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "35"
+    ],
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @base.json b/resources/profiles/BBL/filament/Generic PLA-CF @base.json
index 597bdd6e23b..8bb1564a4ce 100644
--- a/resources/profiles/BBL/filament/Generic PLA-CF @base.json	
+++ b/resources/profiles/BBL/filament/Generic PLA-CF @base.json	
@@ -23,6 +23,12 @@
     "required_nozzle_HRC": [
         "40"
     ],
+    "supertack_plate_temp": [
+        "50"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "50"
+    ],
     "slow_down_layer_time": [
         "7"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @base.json b/resources/profiles/BBL/filament/Generic PPA-CF @base.json
index 1e642929b29..8c6a9c9b8dc 100644
--- a/resources/profiles/BBL/filament/Generic PPA-CF @base.json	
+++ b/resources/profiles/BBL/filament/Generic PPA-CF @base.json	
@@ -5,12 +5,10 @@
     "from": "system",
     "filament_id": "GFN97",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "filament_max_volumetric_speed": [
         "6"
     ],
-    "filament_type": [
-        "PPA-CF"
-    ],
     "filament_vendor": [
         "Generic"
     ]
diff --git a/resources/profiles/BBL/filament/Generic PPS-CF @base.json b/resources/profiles/BBL/filament/Generic PPS-CF @base.json
index 887d276e2da..5fc5d6e4078 100644
--- a/resources/profiles/BBL/filament/Generic PPS-CF @base.json	
+++ b/resources/profiles/BBL/filament/Generic PPS-CF @base.json	
@@ -5,11 +5,15 @@
     "from": "system",
     "filament_id": "GFT98",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "fan_max_speed": [
         "30"
     ],
+    "filament_cost": [
+        "240"
+    ],
     "filament_density": [
-        "1.3"
+        "1.26"
     ],
     "filament_max_volumetric_speed": [
         "3"
@@ -17,8 +21,8 @@
     "filament_type": [
         "PPS-CF"
     ],
-    "nozzle_temperature_range_high": [
-        "350"
+    "nozzle_temperature_range_low": [
+        "310"
     ],
     "required_nozzle_HRC": [
         "40"
diff --git a/resources/profiles/BBL/filament/Generic PVA @base.json b/resources/profiles/BBL/filament/Generic PVA @base.json
index c29671ea3c4..c394eaeb975 100644
--- a/resources/profiles/BBL/filament/Generic PVA @base.json	
+++ b/resources/profiles/BBL/filament/Generic PVA @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFS99",
     "instantiation": "false",
+    "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.",
     "filament_flow_ratio": [
         "0.95"
     ],
diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1.json
new file mode 100644
index 00000000000..b73d35817b8
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1.json	
@@ -0,0 +1,28 @@
+{
+    "type": "filament",
+    "name": "Generic TPU for AMS @BBL A1",
+    "inherits": "Generic TPU for AMS @base",
+    "from": "system",
+    "setting_id": "GFSU98_02",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "40"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 0.4 nozzle",
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1M.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1M.json
new file mode 100644
index 00000000000..bcb504c0385
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1M.json	
@@ -0,0 +1,28 @@
+{
+    "type": "filament",
+    "name": "Generic TPU for AMS @BBL A1M",
+    "inherits": "Generic TPU for AMS @base",
+    "from": "system",
+    "setting_id": "GFSU98_03",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "40"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.8 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL P1P.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL P1P.json
new file mode 100644
index 00000000000..fafe5667f43
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL P1P.json	
@@ -0,0 +1,31 @@
+{
+    "type": "filament",
+    "name": "Generic TPU for AMS @BBL P1P",
+    "inherits": "Generic TPU for AMS @base",
+    "from": "system",
+    "setting_id": "GFSU98_01",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "40"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1P 0.6 nozzle",
+        "Bambu Lab P1P 0.8 nozzle",
+        "Bambu Lab P1P 0.4 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab X1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X1C.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X1C.json
new file mode 100644
index 00000000000..b2e6d311977
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X1C.json	
@@ -0,0 +1,34 @@
+{
+    "type": "filament",
+    "name": "Generic TPU for AMS @BBL X1C",
+    "inherits": "Generic TPU for AMS @base",
+    "from": "system",
+    "setting_id": "GFSU98_00",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "40"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab X1E 0.4 nozzle",
+        "Bambu Lab X1E 0.6 nozzle",
+        "Bambu Lab X1E 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @base.json b/resources/profiles/BBL/filament/Generic TPU for AMS @base.json
new file mode 100644
index 00000000000..c214ba1c272
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic TPU for AMS @base.json	
@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "name": "Generic TPU for AMS @base",
+    "inherits": "fdm_filament_tpu",
+    "from": "system",
+    "filament_id": "GFU98",
+    "instantiation": "false",
+    "description": "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide.",
+    "filament_cost": [
+        "41.99"
+    ],
+    "filament_density": [
+        "1.26"
+    ],
+    "filament_max_volumetric_speed": [
+        "10.5"
+    ],
+    "filament_retraction_length": [
+        "0.8"
+    ],
+    "filament_type": [
+        "TPU-AMS"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic TPU.json b/resources/profiles/BBL/filament/Generic TPU.json
index 273e9175708..f8dc0320b27 100644
--- a/resources/profiles/BBL/filament/Generic TPU.json	
+++ b/resources/profiles/BBL/filament/Generic TPU.json	
@@ -6,6 +6,7 @@
     "filament_id": "GFU99",
     "setting_id": "GFSR99",
     "instantiation": "true",
+    "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
     "filament_max_volumetric_speed": [
         "3.2"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json
index f99a91cfb05..b80e46e1517 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json	
@@ -8,9 +8,15 @@
     "fan_max_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json
index 63d6bb3f21a..c27df74dbbb 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json	
@@ -8,9 +8,15 @@
     "fan_max_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "16"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json
index ccbfad93a50..f98e7469af8 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "5"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "11.5"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "overhang_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json
index a0a6388bcc8..e18e63964a5 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "5"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "11.5"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "overhang_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json
index 01a5fab4a1e..ad0784193ba 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json	
@@ -11,6 +11,12 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json
index 469caee5cd2..c67fe1d5f81 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json
index fcfc07fd191..7a1fb8c2121 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "22"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json
index 500dacbbf33..af07fa05bac 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json
index 640bb4af9a9..72bb17aa43a 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "15"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json
index b09cbf6aee5..bfaee00f09a 100644
--- a/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json	
@@ -6,6 +6,7 @@
     "filament_id": "GFN99",
     "setting_id": "GFSN98_10",
     "instantiation": "true",
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "fan_cooling_layer_time": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json
index 1e17c278ce2..92d4992a83f 100644
--- a/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json	
@@ -6,6 +6,7 @@
     "filament_id": "GFN98",
     "setting_id": "GFSN99_10",
     "instantiation": "true",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "fan_cooling_layer_time": [
         "5"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json
index effdb2d7f3c..11323400684 100644
--- a/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json	
@@ -6,6 +6,7 @@
     "filament_id": "GFU99",
     "setting_id": "GFSR99_10",
     "instantiation": "true",
+    "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
     "filament_max_volumetric_speed": [
         "3.2"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_abs.json b/resources/profiles/BBL/filament/fdm_filament_abs.json
index 74eb8715180..c01bfb694c3 100644
--- a/resources/profiles/BBL/filament/fdm_filament_abs.json
+++ b/resources/profiles/BBL/filament/fdm_filament_abs.json
@@ -5,6 +5,12 @@
     "from": "system",
     "instantiation": "false",
     "activate_air_filtration": [
+        "1"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
         "0"
     ],
     "cool_plate_temp": [
diff --git a/resources/profiles/BBL/filament/fdm_filament_asa.json b/resources/profiles/BBL/filament/fdm_filament_asa.json
index a0da767a75c..ce1126adf55 100644
--- a/resources/profiles/BBL/filament/fdm_filament_asa.json
+++ b/resources/profiles/BBL/filament/fdm_filament_asa.json
@@ -5,6 +5,12 @@
     "from": "system",
     "instantiation": "false",
     "activate_air_filtration": [
+        "1"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
         "0"
     ],
     "cool_plate_temp": [
diff --git a/resources/profiles/BBL/filament/fdm_filament_bvoh.json b/resources/profiles/BBL/filament/fdm_filament_bvoh.json
index 2b481e35d88..10b86375bb8 100644
--- a/resources/profiles/BBL/filament/fdm_filament_bvoh.json
+++ b/resources/profiles/BBL/filament/fdm_filament_bvoh.json
@@ -67,6 +67,12 @@
     "reduce_fan_stop_start_freq": [
         "1"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "slow_down_min_speed": [
         "20"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_common.json b/resources/profiles/BBL/filament/fdm_filament_common.json
index 6ec95db4a80..1e7a813c4b4 100644
--- a/resources/profiles/BBL/filament/fdm_filament_common.json
+++ b/resources/profiles/BBL/filament/fdm_filament_common.json
@@ -114,6 +114,21 @@
     "full_fan_speed_layer": [
         "0"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_scarf_height": [
+        "10%"
+    ],
+    "filament_scarf_gap": [
+        "0%"
+    ],
+    "filament_scarf_length": [
+        "10"
+    ],
+    "filament_shrink": [
+        "100%"
+    ],
     "hot_plate_temp": [
         "60"
     ],
@@ -138,6 +153,12 @@
     "required_nozzle_HRC": [
         "3"
     ],
+    "supertack_plate_temp": [
+        "45"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "45"
+    ],
     "slow_down_for_layer_cooling": [
         "1"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_eva.json b/resources/profiles/BBL/filament/fdm_filament_eva.json
index 1b2efe2999b..5eaf47fd3c5 100644
--- a/resources/profiles/BBL/filament/fdm_filament_eva.json
+++ b/resources/profiles/BBL/filament/fdm_filament_eva.json
@@ -6,5 +6,11 @@
     "instantiation": "false",
     "filament_type": [
         "EVA"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/fdm_filament_hips.json b/resources/profiles/BBL/filament/fdm_filament_hips.json
index 4d1b09d37af..c7c0ab7d2f7 100644
--- a/resources/profiles/BBL/filament/fdm_filament_hips.json
+++ b/resources/profiles/BBL/filament/fdm_filament_hips.json
@@ -16,6 +16,12 @@
     "textured_plate_temp": [
         "90"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "cool_plate_temp_initial_layer": [
         "0"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_pa.json b/resources/profiles/BBL/filament/fdm_filament_pa.json
index 1cd78ec77f6..5f0a1ca7fc2 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pa.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pa.json
@@ -7,6 +7,12 @@
     "activate_air_filtration": [
         "1"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "cool_plate_temp": [
         "0"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_pc.json b/resources/profiles/BBL/filament/fdm_filament_pc.json
index 03bc9e5663f..313655fc8a3 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pc.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pc.json
@@ -4,6 +4,12 @@
     "inherits": "fdm_filament_common",
     "from": "system",
     "instantiation": "false",
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "cool_plate_temp": [
         "0"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_pctg.json b/resources/profiles/BBL/filament/fdm_filament_pctg.json
index 1b38376293e..5c93c7d0d4a 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pctg.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pctg.json
@@ -1,64 +1,70 @@
 {
-  "type": "filament",
-  "name": "fdm_filament_pctg",
-  "inherits": "fdm_filament_common",
-  "from": "system",
-  "instantiation": "false",
-  "eng_plate_temp": [
-      "0"
-  ],
-  "eng_plate_temp_initial_layer": [
-      "0"
-  ],
-  "fan_cooling_layer_time": [
-      "20"
-  ],
-  "fan_min_speed": [
-      "20"
-  ],
-  "filament_cost": [
-      "30"
-  ],
-  "filament_density": [
-      "1.27"
-  ],
-  "filament_max_volumetric_speed": [
-      "25"
-  ],
-  "filament_type": [
-      "PCTG"
-  ],
-  "hot_plate_temp": [
-      "80"
-  ],
-  "hot_plate_temp_initial_layer": [
-      "80"
-  ],
-  "nozzle_temperature": [
-      "255"
-  ],
-  "nozzle_temperature_initial_layer": [
-      "255"
-  ],
-  "nozzle_temperature_range_high": [
-      "260"
-  ],
-  "nozzle_temperature_range_low": [
-      "220"
-  ],
-  "reduce_fan_stop_start_freq": [
-      "1"
-  ],
-  "temperature_vitrification": [
-      "70"
-  ],
-  "textured_plate_temp": [
-      "80"
-  ],
-  "textured_plate_temp_initial_layer": [
-      "80"
-  ],
-  "filament_start_gcode": [
-      "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-  ]
+    "type": "filament",
+    "name": "fdm_filament_pctg",
+    "inherits": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "eng_plate_temp": [
+        "0"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "20"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
+    "filament_cost": [
+        "30"
+    ],
+    "filament_density": [
+        "1.27"
+    ],
+    "filament_max_volumetric_speed": [
+        "25"
+    ],
+    "filament_type": [
+        "PCTG"
+    ],
+    "hot_plate_temp": [
+        "80"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "80"
+    ],
+    "nozzle_temperature": [
+        "255"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "255"
+    ],
+    "nozzle_temperature_range_high": [
+        "260"
+    ],
+    "nozzle_temperature_range_low": [
+        "220"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "temperature_vitrification": [
+        "70"
+    ],
+    "textured_plate_temp": [
+        "80"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "80"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/fdm_filament_pe.json b/resources/profiles/BBL/filament/fdm_filament_pe.json
index 8ce20df68a2..0808a35524c 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pe.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pe.json
@@ -64,6 +64,12 @@
     "reduce_fan_stop_start_freq": [
         "1"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "slow_down_layer_time": [
         "4"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_pet.json b/resources/profiles/BBL/filament/fdm_filament_pet.json
index 4a5f6085cae..ef13f4f8947 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pet.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pet.json
@@ -49,6 +49,12 @@
     "reduce_fan_stop_start_freq": [
         "1"
     ],
+    "supertack_plate_temp": [
+        "70"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "70"
+    ],
     "temperature_vitrification": [
         "70"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_pha.json b/resources/profiles/BBL/filament/fdm_filament_pha.json
index 82519f1b2e4..19d143f5a7c 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pha.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pha.json
@@ -64,6 +64,12 @@
     "reduce_fan_stop_start_freq": [
         "1"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "slow_down_layer_time": [
         "4"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_pla.json b/resources/profiles/BBL/filament/fdm_filament_pla.json
index a93b981098f..9321b9ecad6 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pla.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pla.json
@@ -4,62 +4,56 @@
     "inherits": "fdm_filament_common",
     "from": "system",
     "instantiation": "false",
-    "fan_cooling_layer_time": [
-        "100"
+    "additional_cooling_fan_speed": [
+        "70"
     ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_cost": [
-        "20"
+    "close_fan_the_first_x_layers": [
+        "1"
     ],
     "cool_plate_temp": [
         "35"
     ],
+    "cool_plate_temp_initial_layer": [
+        "35"
+    ],
     "eng_plate_temp": [
         "0"
     ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "35"
-    ],
     "eng_plate_temp_initial_layer": [
         "0"
     ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
+    "fan_cooling_layer_time": [
+        "100"
     ],
     "fan_min_speed": [
         "100"
     ],
-    "overhang_fan_threshold": [
-        "50%"
+    "filament_cost": [
+        "20"
     ],
-    "close_fan_the_first_x_layers": [
-        "1"
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_scarf_gap": [
+        "15%"
+    ],
+    "hot_plate_temp": [
+        "55"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "55"
     ],
     "nozzle_temperature": [
         "220"
     ],
-    "temperature_vitrification": [
-        "45"
+    "nozzle_temperature_initial_layer": [
+        "220"
     ],
     "nozzle_temperature_range_low": [
         "190"
@@ -67,14 +61,26 @@
     "nozzle_temperature_range_high": [
         "240"
     ],
-    "slow_down_min_speed": [
-        "20"
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
     ],
     "slow_down_layer_time": [
         "4"
     ],
-    "additional_cooling_fan_speed": [
-        "70"
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "temperature_vitrification": [
+        "45"
+    ],
+    "textured_plate_temp": [
+        "55"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "55"
     ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
diff --git a/resources/profiles/BBL/filament/fdm_filament_pp.json b/resources/profiles/BBL/filament/fdm_filament_pp.json
index 83a42782507..66927c186a9 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pp.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pp.json
@@ -64,6 +64,12 @@
     "reduce_fan_stop_start_freq": [
         "1"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "slow_down_layer_time": [
         "4"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_ppa.json b/resources/profiles/BBL/filament/fdm_filament_ppa.json
index 23b082b05ca..c45e713f340 100644
--- a/resources/profiles/BBL/filament/fdm_filament_ppa.json
+++ b/resources/profiles/BBL/filament/fdm_filament_ppa.json
@@ -7,6 +7,12 @@
     "activate_air_filtration": [
         "1"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "cool_plate_temp": [
         "0"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_pps.json b/resources/profiles/BBL/filament/fdm_filament_pps.json
index a3f104b6f3a..b8d366193eb 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pps.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pps.json
@@ -7,6 +7,12 @@
     "chamber_temperatures": [
         "60"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "cool_plate_temp": [
         "0"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_pva.json b/resources/profiles/BBL/filament/fdm_filament_pva.json
index 7d0bdf1b4a7..2b00903a609 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pva.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pva.json
@@ -70,6 +70,12 @@
     "reduce_fan_stop_start_freq": [
         "1"
     ],
+    "supertack_plate_temp": [
+        "35"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "35"
+    ],
     "slow_down_layer_time": [
         "4"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_tpu.json b/resources/profiles/BBL/filament/fdm_filament_tpu.json
index 8ec0a4fec3d..13a305e762e 100644
--- a/resources/profiles/BBL/filament/fdm_filament_tpu.json
+++ b/resources/profiles/BBL/filament/fdm_filament_tpu.json
@@ -10,6 +10,12 @@
     "close_fan_the_first_x_layers": [
         "1"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "cool_plate_temp": [
         "30"
     ],
diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json
index b198ff4dda6..a897bd8aaae 100644
--- a/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json	
@@ -16,10 +16,11 @@
         "Bambu PLA Basic @BBL A1"
     ],
     "default_print_profile": "0.20mm Standard @BBL A1",
+    "enable_long_retraction_when_cut": "2",
     "extruder_clearance_height_to_lid": "256",
     "extruder_clearance_height_to_rod": "25",
     "extruder_clearance_max_radius": "73",
-    "extruder_clearance_radius": "73",
+    "extruder_clearance_dist_to_rod": "56.5",
     "head_wrap_detect_zone": [
         "226x224",
         "256x224",
diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json
index 2608b6b731f..5319a77f854 100644
--- a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json	
@@ -17,10 +17,11 @@
         "Bambu PLA Basic @BBL A1M"
     ],
     "default_print_profile": "0.20mm Standard @BBL A1M",
+    "enable_long_retraction_when_cut": "2",
     "extruder_clearance_height_to_lid": "180",
     "extruder_clearance_height_to_rod": "25",
     "extruder_clearance_max_radius": "73",
-    "extruder_clearance_radius": "73",
+    "extruder_clearance_dist_to_rod": "56.5",
     "head_wrap_detect_zone": [
         "156x152",
         "180x152",
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json
index c92d63d0b65..b947c06289c 100644
--- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json	
@@ -37,7 +37,7 @@
         "Bambu Lab X1E 0.4 nozzle",
         "Bambu Lab A1 0.4 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20241115 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression",
+    "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression",
     "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n    M400 ; wait all motion done\n    M991 S0 P-1 ;end smooth timelapse at safe pos\n    M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n    G1 Z{max_layer_z + 100.0} F600\n    G1 Z{max_layer_z +98.0}\n{else}\n    G1 Z250 F600\n    G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100  ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n",
     "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change",
     "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F[old_filament_e_feedrate]\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S[nozzle_temperature_range_high]\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n"
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json
index 8b9d063dbc5..5cee189af55 100644
--- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json	
@@ -29,7 +29,6 @@
     "nozzle_height": "4.2",
     "nozzle_type": "stainless_steel",
     "scan_first_layer": "0",
-    "support_air_filtration": "1",
     "upward_compatible_machine": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json
index 9c1127eec43..2fa72d13f96 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json	
@@ -30,5 +30,5 @@
         "Bambu Lab X1E 0.2 nozzle",
         "Bambu Lab A1 0.2 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240528 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n\t{if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.160\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.080\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n"
+    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20241023 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n\t{if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.160\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.080\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json
index a70b7c8f11d..90b3f201472 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json	
@@ -30,7 +30,6 @@
     "nozzle_height": "4.2",
     "nozzle_type": "stainless_steel",
     "scan_first_layer": "1",
-    "support_air_filtration": "1",
     "upward_compatible_machine": [
         "Bambu Lab P1S 0.4 nozzle",
         "Bambu Lab P1P 0.4 nozzle",
@@ -38,7 +37,7 @@
         "Bambu Lab X1E 0.4 nozzle",
         "Bambu Lab A1 0.4 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240528 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.040\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n",
+    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240919 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.040\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n",
     "machine_end_gcode": ";===== date: 20240528 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos\nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n    M400 ; wait all motion done\n    M991 S0 P-1 ;end smooth timelapse at safe pos\n    M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n    G1 Z{max_layer_z + 100.0} F600\n    G1 Z{max_layer_z +98.0}\n{else}\n    G1 Z250 F600\n    G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100  ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n;=====printer finish  sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M40 E42 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C46 D10 M80 E46 F10 N80\nM1006 A44 B20 L100 C39 D20 M60 E48 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C48 D10 M60 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10  N100\nM1006 A49 B20 L100 C44 D20 M100 E41 F20 N100\nM1006 A0 B20 L100 C0 D20 M60 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M30 E37 F20 N60\nM1006 W\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n",
     "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F[old_filament_e_feedrate]\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S[nozzle_temperature_range_high]\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json
index ec5a3b1ea9c..5d5d0ea81a7 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json	
@@ -34,5 +34,5 @@
         "Bambu Lab X1E 0.6 nozzle",
         "Bambu Lab A1 0.6 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20240528 =====================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.333\n    G0 F1200.0 X226 Y15   Z0.2 E0.495\n    G0 F1200.0 X226 Y8    Z0.2 E0.691\n    G0 F1200.0 X216 Y8    Z0.2 E0.988\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.642\n\n    G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.56 F1200.0\n    G0 X35.0 Y6.0 E1.75 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.030\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.015\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n    M623\n\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n"
+    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20241023 =====================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.333\n    G0 F1200.0 X226 Y15   Z0.2 E0.495\n    G0 F1200.0 X226 Y8    Z0.2 E0.691\n    G0 F1200.0 X216 Y8    Z0.2 E0.988\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.642\n\n    G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.56 F1200.0\n    G0 X35.0 Y6.0 E1.75 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.030\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.015\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n    M623\n\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json
index fd1aa6bf82e..e9002fed0c7 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json	
@@ -34,5 +34,5 @@
         "Bambu Lab X1E 0.8 nozzle",
         "Bambu Lab A1 0.8 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240528 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.482\n    G0 F1200.0 X226 Y15   Z0.2 E0.550\n    G0 F1200.0 X226 Y8    Z0.2 E0.768\n    G0 F1200.0 X216 Y8    Z0.2 E1.098\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.714\n\n    G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.70 F1200.0\n    G0 X35.0 Y6.0 E1.90 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X110.000 E9.35441 F4800\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.010\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n    M623\n\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n"
+    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20241023 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.482\n    G0 F1200.0 X226 Y15   Z0.2 E0.550\n    G0 F1200.0 X226 Y8    Z0.2 E0.768\n    G0 F1200.0 X216 Y8    Z0.2 E1.098\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.714\n\n    G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.70 F1200.0\n    G0 X35.0 Y6.0 E1.90 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X110.000 E9.35441 F4800\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.010\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n    M623\n\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json
index a0b54160a5c..fc3fbaced39 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json	
@@ -31,5 +31,5 @@
         "Bambu Lab X1E 0.2 nozzle",
         "Bambu Lab A1 0.2 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240528 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n\t{if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.160\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.080\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n"
+    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20241023 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n\t{if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.160\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.080\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json
index 6577b3950ad..70baeeacec3 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json	
@@ -28,7 +28,6 @@
     "machine_unload_filament_time": "28",
     "nozzle_height": "4.2",
     "scan_first_layer": "1",
-    "support_air_filtration": "1",
     "upward_compatible_machine": [
         "Bambu Lab P1S 0.4 nozzle",
         "Bambu Lab P1P 0.4 nozzle",
@@ -36,7 +35,7 @@
         "Bambu Lab X1E 0.4 nozzle",
         "Bambu Lab A1 0.4 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240528 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.040\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4",
+    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240919 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.040\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n",
     "machine_end_gcode": ";===== date: 20240528 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos\nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n    M400 ; wait all motion done\n    M991 S0 P-1 ;end smooth timelapse at safe pos\n    M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n    G1 Z{max_layer_z + 100.0} F600\n    G1 Z{max_layer_z +98.0}\n{else}\n    G1 Z250 F600\n    G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100  ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n;=====printer finish  sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M40 E42 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C46 D10 M80 E46 F10 N80\nM1006 A44 B20 L100 C39 D20 M60 E48 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C48 D10 M60 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10  N100\nM1006 A49 B20 L100 C44 D20 M100 E41 F20 N100\nM1006 A0 B20 L100 C0 D20 M60 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M30 E37 F20 N60\nM1006 W\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n",
     "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F[old_filament_e_feedrate]\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S[nozzle_temperature_range_high]\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json
index 2dffc6f94c6..02326f033f3 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json	
@@ -33,5 +33,5 @@
         "Bambu Lab X1E 0.6 nozzle",
         "Bambu Lab A1 0.6 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20240528 =====================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.333\n    G0 F1200.0 X226 Y15   Z0.2 E0.495\n    G0 F1200.0 X226 Y8    Z0.2 E0.691\n    G0 F1200.0 X216 Y8    Z0.2 E0.988\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.642\n\n    G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.56 F1200.0\n    G0 X35.0 Y6.0 E1.75 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.030\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.015\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n    M623\n\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n"
+    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20241023 =====================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.333\n    G0 F1200.0 X226 Y15   Z0.2 E0.495\n    G0 F1200.0 X226 Y8    Z0.2 E0.691\n    G0 F1200.0 X216 Y8    Z0.2 E0.988\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.642\n\n    G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.56 F1200.0\n    G0 X35.0 Y6.0 E1.75 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.030\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.015\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n    M623\n\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json
index 4e22e6bc784..2ccd165cb6e 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json	
@@ -33,5 +33,5 @@
         "Bambu Lab X1E 0.8 nozzle",
         "Bambu Lab A1 0.8 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240528 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.482\n    G0 F1200.0 X226 Y15   Z0.2 E0.550\n    G0 F1200.0 X226 Y8    Z0.2 E0.768\n    G0 F1200.0 X216 Y8    Z0.2 E1.098\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.714\n\n    G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.70 F1200.0\n    G0 X35.0 Y6.0 E1.90 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X110.000 E9.35441 F4800\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.010\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n    M623\n\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n"
+    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20241023 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.482\n    G0 F1200.0 X226 Y15   Z0.2 E0.550\n    G0 F1200.0 X226 Y8    Z0.2 E0.768\n    G0 F1200.0 X216 Y8    Z0.2 E1.098\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.714\n\n    G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.70 F1200.0\n    G0 X35.0 Y6.0 E1.90 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X110.000 E9.35441 F4800\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.010\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n    M623\n\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json
index 3050ab385a0..4277bdf3dce 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json	
@@ -37,7 +37,7 @@
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab A1 0.4 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20230815 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.040\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n\n",
+    "machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20240919 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.040\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n",
     "machine_end_gcode": ";===== date: 20240402 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM141 S0 ; turn off chamber \nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n    M400 ; wait all motion done\n    M991 S0 P-1 ;end smooth timelapse at safe pos\n    M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n    G1 Z{max_layer_z + 100.0} F600\n    G1 Z{max_layer_z +98.0}\n{else}\n    G1 Z250 F600\n    G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100  ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n\n",
     "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\n{if long_retraction_when_cut && retraction_distance_when_cut > 2}\nG1 E-[retraction_distance_when_cut] F200\nM400\n{endif}\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\nM400\n{if long_retraction_when_cut && retraction_distance_when_cut > 2}\nG1 E{retraction_distance_when_cut - 2} F200\nG1 E2 F20\nM400\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S[nozzle_temperature_range_high]\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/fdm_machine_common.json b/resources/profiles/BBL/machine/fdm_machine_common.json
index 59c372c15fc..e0968ac56f5 100644
--- a/resources/profiles/BBL/machine/fdm_machine_common.json
+++ b/resources/profiles/BBL/machine/fdm_machine_common.json
@@ -79,9 +79,10 @@
         "0.08"
     ],
     "printable_height": "250",
-    "extruder_clearance_radius": "65",
     "extruder_clearance_height_to_rod": "34",
     "extruder_clearance_height_to_lid": "140",
+    "extruder_clearance_max_radius": "65",
+    "extruder_clearance_dist_to_rod": "33",
     "printer_settings_id": "",
     "retraction_minimum_travel": [
         "2"
@@ -123,7 +124,5 @@
     "upward_compatible_machine": [],
     "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
     "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
-    "change_filament_gcode": "",
-    "purge_in_prime_tower": "0",
-    "enable_filament_ramming": "0"
+    "change_filament_gcode": ""
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json
index 227fb04c57e..37a2a127773 100644
--- a/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json	
@@ -8,7 +8,6 @@
     "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
-        "Bambu Lab P1P 0.2 nozzle",
-        "Bambu Lab P1S 0.2 nozzle"
+        "Bambu Lab P1P 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json
index 0857a48e0e3..364bcaa1ee4 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json
@@ -12,6 +12,7 @@
     "bridge_flow": "1",
     "line_width": "0.22",
     "outer_wall_line_width": "0.22",
+    "ironing_inset": "0.11",
     "initial_layer_line_width": "0.25",
     "sparse_infill_line_width": "0.22",
     "inner_wall_line_width": "0.22",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json
index 80670ce3b6b..52a1749075b 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json
@@ -12,6 +12,7 @@
     "bridge_flow": "1",
     "line_width": "0.22",
     "outer_wall_line_width": "0.22",
+    "ironing_inset": "0.11",
     "initial_layer_line_width": "0.25",
     "sparse_infill_line_width": "0.22",
     "inner_wall_line_width": "0.22",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json
index 9d54d14c185..020a3f9cc87 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json
@@ -12,6 +12,7 @@
     "bridge_flow": "1",
     "line_width": "0.22",
     "outer_wall_line_width": "0.22",
+    "ironing_inset": "0.11",
     "initial_layer_line_width": "0.25",
     "sparse_infill_line_width": "0.22",
     "inner_wall_line_width": "0.22",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json
index 9d35f2501e5..56aedfd03ed 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json
@@ -12,6 +12,7 @@
     "bridge_flow": "1",
     "line_width": "0.22",
     "outer_wall_line_width": "0.22",
+    "ironing_inset": "0.11",
     "initial_layer_line_width": "0.25",
     "sparse_infill_line_width": "0.22",
     "inner_wall_line_width": "0.22",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json
index 573669d4a5b..7c10c6c6730 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json
@@ -12,6 +12,7 @@
     "bridge_flow": "1",
     "line_width": "0.22",
     "outer_wall_line_width": "0.22",
+    "ironing_inset": "0.11",
     "initial_layer_line_width": "0.25",
     "sparse_infill_line_width": "0.22",
     "inner_wall_line_width": "0.22",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json
index 0220f43a0d1..31c88af561e 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.62",
     "outer_wall_line_width": "0.62",
+    "ironing_inset": "0.31",
     "initial_layer_line_width": "0.62",
     "sparse_infill_line_width": "0.62",
     "inner_wall_line_width": "0.62",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json
index 514e31759ac..ca621513421 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.62",
     "outer_wall_line_width": "0.62",
+    "ironing_inset": "0.31",
     "initial_layer_line_width": "0.62",
     "sparse_infill_line_width": "0.62",
     "inner_wall_line_width": "0.62",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json
index 5fedaf53d63..88e1f680758 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.82",
     "outer_wall_line_width": "0.82",
+    "ironing_inset": "0.41",
     "initial_layer_line_width": "0.82",
     "sparse_infill_line_width": "0.82",
     "inner_wall_line_width": "0.82",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json
index 26b39f37363..08476dbb784 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.62",
     "outer_wall_line_width": "0.62",
+    "ironing_inset": "0.31",
     "initial_layer_line_width": "0.62",
     "sparse_infill_line_width": "0.62",
     "inner_wall_line_width": "0.62",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json
index 0f5913b2eb7..c1622d28f55 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.82",
     "outer_wall_line_width": "0.82",
+    "ironing_inset": "0.41",
     "initial_layer_line_width": "0.82",
     "sparse_infill_line_width": "0.82",
     "inner_wall_line_width": "0.82",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json
index f94531fbe37..f9c917dfc58 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.62",
     "outer_wall_line_width": "0.62",
+    "ironing_inset": "0.31",
     "initial_layer_line_width": "0.62",
     "sparse_infill_line_width": "0.62",
     "inner_wall_line_width": "0.62",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json
index 3e0d8b147ee..be6eb5944a3 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.82",
     "outer_wall_line_width": "0.82",
+    "ironing_inset": "0.41",
     "initial_layer_line_width": "0.82",
     "sparse_infill_line_width": "0.82",
     "inner_wall_line_width": "0.82",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json
index 07120eef78d..d879b17b8b0 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.62",
     "outer_wall_line_width": "0.62",
+    "ironing_inset": "0.31",
     "initial_layer_line_width": "0.62",
     "sparse_infill_line_width": "0.62",
     "inner_wall_line_width": "0.62",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json
index 3a77fbf006e..e9955abd55e 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.82",
     "outer_wall_line_width": "0.82",
+    "ironing_inset": "0.41",
     "initial_layer_line_width": "0.82",
     "sparse_infill_line_width": "0.82",
     "inner_wall_line_width": "0.82",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json
index 3970ac5ac72..99fb6bf6e7d 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.82",
     "outer_wall_line_width": "0.82",
+    "ironing_inset": "0.41",
     "initial_layer_line_width": "0.82",
     "sparse_infill_line_width": "0.82",
     "inner_wall_line_width": "0.82",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_common.json b/resources/profiles/BBL/process/fdm_process_bbl_common.json
index fc377a0b86a..d77980a29d8 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_common.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_common.json
@@ -59,6 +59,7 @@
     "tree_support_branch_diameter": "2",
     "tree_support_branch_angle": "45",
     "tree_support_wall_count": "0",
+    "max_bridge_length": "0",
     "top_surface_pattern": "monotonicline",
     "top_surface_acceleration": "2000",
     "top_surface_speed": "200",
diff --git a/resources/profiles/BBL/process/fdm_process_common.json b/resources/profiles/BBL/process/fdm_process_common.json
index c68411dbbe1..1723f8835ed 100644
--- a/resources/profiles/BBL/process/fdm_process_common.json
+++ b/resources/profiles/BBL/process/fdm_process_common.json
@@ -13,6 +13,7 @@
     "bridge_no_support": "0",
     "elefant_foot_compensation": "0.1",
     "outer_wall_line_width": "0.42",
+    "ironing_inset": "0.21",
     "outer_wall_speed": "120",
     "line_width": "0.45",
     "infill_direction": "45",
@@ -69,5 +70,6 @@
     "xy_contour_compensation": "0",
     "compatible_printers": [],
     "smooth_coefficient": "80",
-    "overhang_totally_speed": "24"
+    "overhang_totally_speed": "19",
+    "scarf_angle_threshold": "155"
 }
\ No newline at end of file

From 3e26852aecc119eae461686a73713fea97d415ce Mon Sep 17 00:00:00 2001
From: Ferdinand Linnenberg <ferdinand@linnenberg.dev>
Date: Sat, 7 Dec 2024 11:55:15 +0100
Subject: [PATCH 2/8] fix: updated BBL.json

---
 .idea/codeStyles/Project.xml                  |  99 ++
 .idea/misc.xml                                |   3 +
 Dockerfile                                    |  27 +-
 .../.cmake/api/v1/query/cache-v2              |   0
 .../.cmake/api/v1/query/cmakeFiles-v1         |   0
 .../.cmake/api/v1/query/codemodel-v2          |   0
 .../.cmake/api/v1/query/toolchains-v1         |   0
 cmake-build-debug/CMakeCache.txt              | 957 ++++++++++++++++++
 .../CMakeFiles/3.30.5/CMakeCCompiler.cmake    |  81 ++
 .../CMakeFiles/3.30.5/CMakeCXXCompiler.cmake  | 105 ++
 .../3.30.5/CMakeDetermineCompilerABI_C.bin    | Bin 0 -> 15448 bytes
 .../3.30.5/CMakeDetermineCompilerABI_CXX.bin  | Bin 0 -> 15464 bytes
 .../CMakeFiles/3.30.5/CMakeSystem.cmake       |  15 +
 .../3.30.5/CompilerIdC/CMakeCCompilerId.c     | 904 +++++++++++++++++
 .../CMakeFiles/3.30.5/CompilerIdC/a.out       | Bin 0 -> 15560 bytes
 .../CompilerIdCXX/CMakeCXXCompilerId.cpp      | 919 +++++++++++++++++
 .../CMakeFiles/3.30.5/CompilerIdCXX/a.out     | Bin 0 -> 15576 bytes
 .../CMakeFiles/CMakeConfigureLog.yaml         | 562 ++++++++++
 .../CMakeFiles/clion-Debug-log.txt            |  66 ++
 .../CMakeFiles/clion-environment.txt          |   4 +
 .../CMakeFiles/cmake.check_cache              |   1 +
 resources/profiles/BBL.json                   | 174 +++-
 22 files changed, 3894 insertions(+), 23 deletions(-)
 create mode 100644 cmake-build-debug/.cmake/api/v1/query/cache-v2
 create mode 100644 cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1
 create mode 100644 cmake-build-debug/.cmake/api/v1/query/codemodel-v2
 create mode 100644 cmake-build-debug/.cmake/api/v1/query/toolchains-v1
 create mode 100644 cmake-build-debug/CMakeCache.txt
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
 create mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin
 create mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
 create mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
 create mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
 create mode 100644 cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
 create mode 100644 cmake-build-debug/CMakeFiles/clion-Debug-log.txt
 create mode 100644 cmake-build-debug/CMakeFiles/clion-environment.txt
 create mode 100644 cmake-build-debug/CMakeFiles/cmake.check_cache

diff --git a/.idea/codeStyles/Project.xml b/.idea/codeStyles/Project.xml
index f60388162da..53162672047 100644
--- a/.idea/codeStyles/Project.xml
+++ b/.idea/codeStyles/Project.xml
@@ -1,5 +1,104 @@
 <component name="ProjectCodeStyleConfiguration">
   <code_scheme name="Project" version="173">
+    <RiderCodeStyleSettings>
+      <option name="/Default/CodeStyle/CodeFormatting/CppClangFormat/EnableClangFormatSupport/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/EditorConfig/EnableClangFormatSupport/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_BINARY_EXPRESSIONS_CHAIN/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_CALLS_CHAIN/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_EXPRESSION/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_FOR_STMT/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTIPLE_DECLARATION/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_TERNARY/@EntryValue" value="ALIGN_ALL" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_CLASS_DEFINITION/@EntryValue" value="1" type="int" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/KEEP_BLANK_LINES_IN_DECLARATIONS/@EntryValue" value="2" type="int" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/KEEP_BLANK_LINES_IN_CODE/@EntryValue" value="2" type="int" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/KEEP_USER_LINEBREAKS/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_CASE_FROM_SWITCH/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_COMMENT/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INT_ALIGN_EQ/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SIMPLE_BLOCK_STYLE/@EntryValue" value="DO_NOT_CHANGE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_COMMA_IN_TEMPLATE_ARGS/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_COMMA_IN_TEMPLATE_PARAMS/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_FOR_SEMICOLON/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_FOR_SEMICOLON/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_UNARY_OPERATOR/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_ARRAY_ACCESS_BRACKETS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_CAST_EXPRESSION_PARENTHESES/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_INITIALIZER_BRACES/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_METHOD_PARENTHESES/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_INITIALIZER_BRACES/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPECIAL_ELSE_IF_TREATMENT/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_CAST_EXPRESSION_PARENTHESES/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_AFTER_BINARY_OPSIGN/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_TERNARY_OPSIGNS/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/TYPE_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/OTHER_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/CASE_BLOCK_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_FUNCTION_DECLARATION/@EntryValue" value="1" type="int" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_FUNCTION_DEFINITION/@EntryValue" value="1" type="int" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_WHILE_ON_NEW_LINE/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_ELSE_ON_NEW_LINE/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_CATCH_ON_NEW_LINE/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/NAMESPACE_INDENTATION/@EntryValue" value="All" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_ARGUMENT/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_EXTENDS_LIST/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_PARAMETER/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_TYPE_ARGUMENT/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_TYPE_PARAMETER/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_DECLARATIONS/@EntryValue" value="0" type="int" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_ACCESS_SPECIFIERS_FROM_CLASS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_CLASS_MEMBERS_FROM_ACCESS_SPECIFIERS/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/LINE_BREAK_AFTER_COLON_IN_MEMBER_INITIALIZER_LISTS/@EntryValue" value="ON_SINGLE_LINE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/MEMBER_INITIALIZER_LIST_STYLE/@EntryValue" value="DO_NOT_CHANGE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_NAMESPACE_DEFINITIONS_ON_SAME_LINE/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_COLON_IN_BITFIELD_DECLARATOR/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_COLON_IN_BITFIELD_DECLARATOR/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_EXTENDS_COLON/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_EXTENDS_COLON/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_FOR_COLON/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_FOR_COLON/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_DATA_MEMBER/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_DATA_MEMBERS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_METHOD/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_NESTED_DECLARATOR/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_REF_IN_DATA_MEMBER/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_REF_IN_DATA_MEMBERS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_REF_IN_METHOD/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_ABSTRACT_DECL/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_DATA_MEMBER/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_DATA_MEMBERS/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_METHOD/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_ABSTRACT_DECL/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_DATA_MEMBER/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_DATA_MEMBERS/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_METHOD/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_TEMPLATE_ARGS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_TEMPLATE_PARAMS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BETWEEN_CLOSING_ANGLE_BRACKETS_IN_TEMPLATE_ARGS/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_TEMPLATE_PARAMS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_TEMPLATE_ARGS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_TEMPLATE_PARAMS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_DECLARATION_PARENTHESES/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_BLOCKS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_INVOCATION_LPAR/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_AFTER_INVOCATION_LPAR/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_INVOCATION_RPAR/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_DECLARATION_LPAR/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_AFTER_DECLARATION_LPAR/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_DECLARATION_RPAR/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_ARGUMENTS_STYLE/@EntryValue" value="WRAP_IF_LONG" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_PARAMETERS_STYLE/@EntryValue" value="WRAP_IF_LONG" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BREAK_TEMPLATE_DECLARATION/@EntryValue" value="LINE_BREAK" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/NAMESPACE_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/FREE_BLOCK_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INVOCABLE_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ANONYMOUS_METHOD_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INITIALIZER_BRACES/@EntryValue" value="END_OF_LINE_NO_SPACE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_STYLE/@EntryValue" value="Space" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_SIZE/@EntryValue" value="4" type="int" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/CONTINUOUS_LINE_INDENT/@EntryValue" value="Double" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/TAB_WIDTH/@EntryValue" value="4" type="int" />
+    </RiderCodeStyleSettings>
     <clangFormatSettings>
       <option name="ENABLED" value="true" />
     </clangFormatSettings>
diff --git a/.idea/misc.xml b/.idea/misc.xml
index 79b3c94830b..0b76fe5109e 100644
--- a/.idea/misc.xml
+++ b/.idea/misc.xml
@@ -1,4 +1,7 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <project version="4">
+  <component name="CMakePythonSetting">
+    <option name="pythonIntegrationState" value="YES" />
+  </component>
   <component name="CMakeWorkspace" PROJECT_DIR="$PROJECT_DIR$" />
 </project>
\ No newline at end of file
diff --git a/Dockerfile b/Dockerfile
index 868779b0afe..5e8c8274ad8 100644
--- a/Dockerfile
+++ b/Dockerfile
@@ -1,6 +1,12 @@
 FROM docker.io/ubuntu:22.04
 LABEL maintainer "DeftDawg <DeftDawg@gmail.com>"
 
+# Declare build arguments
+ARG USER=root
+ARG UID=0
+ARG GID=0
+ARG NCORES=1
+
 # Disable interactive package configuration
 RUN apt-get update && \
     echo 'debconf debconf/frontend select Noninteractive' | debconf-set-selections
@@ -9,7 +15,8 @@ RUN apt-get update && \
 RUN echo deb-src http://archive.ubuntu.com/ubuntu \
     $(cat /etc/*release | grep VERSION_CODENAME | cut -d= -f2) main universe>> /etc/apt/sources.list 
 
-RUN apt-get update && apt-get install  -y \
+# Install dependencies
+RUN apt-get update && apt-get install -y \
     autoconf \
     build-essential \
     cmake \
@@ -53,12 +60,13 @@ RUN apt-get update && apt-get install  -y \
 # Change your locale here if you want.  See the output
 # of `locale -a` to pick the correct string formatting.
 ENV LC_ALL=en_US.utf8
-RUN locale-gen $LC_ALL
+RUN locale-gen "$LC_ALL"
 
 # Set this so that Orca Slicer doesn't complain about
 # the CA cert path on every startup
 ENV SSL_CERT_FILE=/etc/ssl/certs/ca-certificates.crt
 
+# Copy project files
 COPY ./ OrcaSlicer
 
 WORKDIR OrcaSlicer
@@ -83,13 +91,12 @@ RUN ./BuildLinux.sh -i
 # to keep permissions the same.  Just in case, defaults
 # are root.
 SHELL ["/bin/bash", "-l", "-c"]
-ARG USER=root
-ARG UID=0
-ARG GID=0
-RUN [[ "$UID" != "0" ]] \
-  && groupadd -f -g $GID $USER \
-  && useradd -u $UID -g $GID $USER
 
-# Using an entrypoint instead of CMD because the binary
-# accepts several command line arguments.
+# Create user if not root
+RUN if [ "$UID" != "0" ]; then \
+      groupadd -f -g "$GID" "$USER" && \
+      useradd -u "$UID" -g "$GID" "$USER"; \
+    fi
+
+# Set entrypoint
 ENTRYPOINT ["/OrcaSlicer/build/package/bin/orca-slicer"]
diff --git a/cmake-build-debug/.cmake/api/v1/query/cache-v2 b/cmake-build-debug/.cmake/api/v1/query/cache-v2
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1 b/cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/cmake-build-debug/.cmake/api/v1/query/codemodel-v2 b/cmake-build-debug/.cmake/api/v1/query/codemodel-v2
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/cmake-build-debug/.cmake/api/v1/query/toolchains-v1 b/cmake-build-debug/.cmake/api/v1/query/toolchains-v1
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/cmake-build-debug/CMakeCache.txt b/cmake-build-debug/CMakeCache.txt
new file mode 100644
index 00000000000..6a1c377b37b
--- /dev/null
+++ b/cmake-build-debug/CMakeCache.txt
@@ -0,0 +1,957 @@
+# This is the CMakeCache file.
+# For build in directory: /home/scarjit/Git/OrcaSlicer/cmake-build-debug
+# It was generated by CMake: /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake
+# You can edit this file to change values found and used by cmake.
+# If you do not want to change any of the values, simply exit the editor.
+# If you do want to change a value, simply edit, save, and exit the editor.
+# The syntax for the file is as follows:
+# KEY:TYPE=VALUE
+# KEY is the name of a variable in the cache.
+# TYPE is a hint to GUIs for the type of VALUE, DO NOT EDIT TYPE!.
+# VALUE is the current value for the KEY.
+
+########################
+# EXTERNAL cache entries
+########################
+
+Boost_ATOMIC_LIBRARY_RELEASE:STRING=/usr/lib/libboost_atomic.so.1.86.0
+
+Boost_CHRONO_LIBRARY_RELEASE:STRING=/usr/lib/libboost_chrono.so.1.86.0
+
+Boost_DATE_TIME_LIBRARY_RELEASE:STRING=/usr/lib/libboost_date_time.so.1.86.0
+
+//The directory containing a CMake configuration file for Boost.
+Boost_DIR:PATH=/usr/lib/cmake/Boost-1.86.0
+
+Boost_FILESYSTEM_LIBRARY_RELEASE:STRING=/usr/lib/libboost_filesystem.so.1.86.0
+
+//Path to a file.
+Boost_INCLUDE_DIR:PATH=/usr/include
+
+Boost_IOSTREAMS_LIBRARY_RELEASE:STRING=/usr/lib/libboost_iostreams.so.1.86.0
+
+Boost_LOCALE_LIBRARY_RELEASE:STRING=/usr/lib/libboost_locale.so.1.86.0
+
+Boost_LOG_LIBRARY_RELEASE:STRING=/usr/lib/libboost_log.so.1.86.0
+
+Boost_PROGRAM_OPTIONS_LIBRARY_RELEASE:STRING=/usr/lib/libboost_program_options.so.1.86.0
+
+Boost_REGEX_LIBRARY_RELEASE:STRING=/usr/lib/libboost_regex.so.1.86.0
+
+Boost_SYSTEM_LIBRARY_RELEASE:STRING=/usr/lib/libboost_system.so.1.86.0
+
+Boost_THREAD_LIBRARY_RELEASE:STRING=/usr/lib/libboost_thread.so.1.86.0
+
+//Path to a program.
+CMAKE_ADDR2LINE:FILEPATH=/usr/bin/addr2line
+
+//Path to a program.
+CMAKE_AR:FILEPATH=/usr/bin/ar
+
+//Choose the type of build, options are: None Debug Release RelWithDebInfo
+// MinSizeRel ...
+CMAKE_BUILD_TYPE:STRING=Debug
+
+//Enable colored diagnostics throughout.
+CMAKE_COLOR_DIAGNOSTICS:BOOL=ON
+
+//CXX compiler
+CMAKE_CXX_COMPILER:FILEPATH=/usr/bin/c++
+
+//A wrapper around 'ar' adding the appropriate '--plugin' option
+// for the GCC compiler
+CMAKE_CXX_COMPILER_AR:FILEPATH=/usr/bin/gcc-ar
+
+//A wrapper around 'ranlib' adding the appropriate '--plugin' option
+// for the GCC compiler
+CMAKE_CXX_COMPILER_RANLIB:FILEPATH=/usr/bin/gcc-ranlib
+
+//Flags used by the CXX compiler during all build types.
+CMAKE_CXX_FLAGS:STRING=
+
+//Flags used by the CXX compiler during DEBUG builds.
+CMAKE_CXX_FLAGS_DEBUG:STRING=-g
+
+//Flags used by the CXX compiler during MINSIZEREL builds.
+CMAKE_CXX_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG
+
+//Flags used by the CXX compiler during RELEASE builds.
+CMAKE_CXX_FLAGS_RELEASE:STRING=-O3 -DNDEBUG
+
+//Flags used by the CXX compiler during RELWITHDEBINFO builds.
+CMAKE_CXX_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG
+
+//C compiler
+CMAKE_C_COMPILER:FILEPATH=/usr/bin/cc
+
+//A wrapper around 'ar' adding the appropriate '--plugin' option
+// for the GCC compiler
+CMAKE_C_COMPILER_AR:FILEPATH=/usr/bin/gcc-ar
+
+//A wrapper around 'ranlib' adding the appropriate '--plugin' option
+// for the GCC compiler
+CMAKE_C_COMPILER_RANLIB:FILEPATH=/usr/bin/gcc-ranlib
+
+//Flags used by the C compiler during all build types.
+CMAKE_C_FLAGS:STRING=
+
+//Flags used by the C compiler during DEBUG builds.
+CMAKE_C_FLAGS_DEBUG:STRING=-g
+
+//Flags used by the C compiler during MINSIZEREL builds.
+CMAKE_C_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG
+
+//Flags used by the C compiler during RELEASE builds.
+CMAKE_C_FLAGS_RELEASE:STRING=-O3 -DNDEBUG
+
+//Flags used by the C compiler during RELWITHDEBINFO builds.
+CMAKE_C_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG
+
+//Path to a program.
+CMAKE_DLLTOOL:FILEPATH=CMAKE_DLLTOOL-NOTFOUND
+
+//Flags used by the linker during all build types.
+CMAKE_EXE_LINKER_FLAGS:STRING=
+
+//Flags used by the linker during DEBUG builds.
+CMAKE_EXE_LINKER_FLAGS_DEBUG:STRING=
+
+//Flags used by the linker during MINSIZEREL builds.
+CMAKE_EXE_LINKER_FLAGS_MINSIZEREL:STRING=
+
+//Flags used by the linker during RELEASE builds.
+CMAKE_EXE_LINKER_FLAGS_RELEASE:STRING=
+
+//Flags used by the linker during RELWITHDEBINFO builds.
+CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO:STRING=
+
+//Enable/Disable output of compile commands during generation.
+CMAKE_EXPORT_COMPILE_COMMANDS:BOOL=
+
+//Value Computed by CMake.
+CMAKE_FIND_PACKAGE_REDIRECTS_DIR:STATIC=/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/pkgRedirects
+
+//User executables (bin)
+CMAKE_INSTALL_BINDIR:PATH=bin
+
+//Read-only architecture-independent data (DATAROOTDIR)
+CMAKE_INSTALL_DATADIR:PATH=
+
+//Read-only architecture-independent data root (share)
+CMAKE_INSTALL_DATAROOTDIR:PATH=share
+
+//Documentation root (DATAROOTDIR/doc/PROJECT_NAME)
+CMAKE_INSTALL_DOCDIR:PATH=
+
+//C header files (include)
+CMAKE_INSTALL_INCLUDEDIR:PATH=include
+
+//Info documentation (DATAROOTDIR/info)
+CMAKE_INSTALL_INFODIR:PATH=
+
+//Object code libraries (lib)
+CMAKE_INSTALL_LIBDIR:PATH=lib
+
+//Program executables (libexec)
+CMAKE_INSTALL_LIBEXECDIR:PATH=libexec
+
+//Locale-dependent data (DATAROOTDIR/locale)
+CMAKE_INSTALL_LOCALEDIR:PATH=
+
+//Modifiable single-machine data (var)
+CMAKE_INSTALL_LOCALSTATEDIR:PATH=var
+
+//Man documentation (DATAROOTDIR/man)
+CMAKE_INSTALL_MANDIR:PATH=
+
+//C header files for non-gcc (/usr/include)
+CMAKE_INSTALL_OLDINCLUDEDIR:PATH=/usr/include
+
+//Install path prefix, prepended onto install directories.
+CMAKE_INSTALL_PREFIX:PATH=/usr/local
+
+//Run-time variable data (LOCALSTATEDIR/run)
+CMAKE_INSTALL_RUNSTATEDIR:PATH=
+
+//System admin executables (sbin)
+CMAKE_INSTALL_SBINDIR:PATH=sbin
+
+//Modifiable architecture-independent data (com)
+CMAKE_INSTALL_SHAREDSTATEDIR:PATH=com
+
+//Read-only single-machine data (etc)
+CMAKE_INSTALL_SYSCONFDIR:PATH=etc
+
+//Path to a program.
+CMAKE_LINKER:FILEPATH=/usr/bin/ld
+
+//No help, variable specified on the command line.
+CMAKE_MAKE_PROGRAM:UNINITIALIZED=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
+
+//Flags used by the linker during the creation of modules during
+// all build types.
+CMAKE_MODULE_LINKER_FLAGS:STRING=
+
+//Flags used by the linker during the creation of modules during
+// DEBUG builds.
+CMAKE_MODULE_LINKER_FLAGS_DEBUG:STRING=
+
+//Flags used by the linker during the creation of modules during
+// MINSIZEREL builds.
+CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL:STRING=
+
+//Flags used by the linker during the creation of modules during
+// RELEASE builds.
+CMAKE_MODULE_LINKER_FLAGS_RELEASE:STRING=
+
+//Flags used by the linker during the creation of modules during
+// RELWITHDEBINFO builds.
+CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO:STRING=
+
+//Path to a program.
+CMAKE_NM:FILEPATH=/usr/bin/nm
+
+//Path to a program.
+CMAKE_OBJCOPY:FILEPATH=/usr/bin/objcopy
+
+//Path to a program.
+CMAKE_OBJDUMP:FILEPATH=/usr/bin/objdump
+
+//Value Computed by CMake
+CMAKE_PROJECT_DESCRIPTION:STATIC=
+
+//Value Computed by CMake
+CMAKE_PROJECT_HOMEPAGE_URL:STATIC=
+
+//Value Computed by CMake
+CMAKE_PROJECT_NAME:STATIC=OrcaSlicer
+
+//Path to a program.
+CMAKE_RANLIB:FILEPATH=/usr/bin/ranlib
+
+//Path to a program.
+CMAKE_READELF:FILEPATH=/usr/bin/readelf
+
+//Flags used by the linker during the creation of shared libraries
+// during all build types.
+CMAKE_SHARED_LINKER_FLAGS:STRING=
+
+//Flags used by the linker during the creation of shared libraries
+// during DEBUG builds.
+CMAKE_SHARED_LINKER_FLAGS_DEBUG:STRING=
+
+//Flags used by the linker during the creation of shared libraries
+// during MINSIZEREL builds.
+CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL:STRING=
+
+//Flags used by the linker during the creation of shared libraries
+// during RELEASE builds.
+CMAKE_SHARED_LINKER_FLAGS_RELEASE:STRING=
+
+//Flags used by the linker during the creation of shared libraries
+// during RELWITHDEBINFO builds.
+CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO:STRING=
+
+//If set, runtime paths are not added when installing shared libraries,
+// but are added when building.
+CMAKE_SKIP_INSTALL_RPATH:BOOL=NO
+
+//If set, runtime paths are not added when using shared libraries.
+CMAKE_SKIP_RPATH:BOOL=NO
+
+//Flags used by the linker during the creation of static libraries
+// during all build types.
+CMAKE_STATIC_LINKER_FLAGS:STRING=
+
+//Flags used by the linker during the creation of static libraries
+// during DEBUG builds.
+CMAKE_STATIC_LINKER_FLAGS_DEBUG:STRING=
+
+//Flags used by the linker during the creation of static libraries
+// during MINSIZEREL builds.
+CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL:STRING=
+
+//Flags used by the linker during the creation of static libraries
+// during RELEASE builds.
+CMAKE_STATIC_LINKER_FLAGS_RELEASE:STRING=
+
+//Flags used by the linker during the creation of static libraries
+// during RELWITHDEBINFO builds.
+CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO:STRING=
+
+//Path to a program.
+CMAKE_STRIP:FILEPATH=/usr/bin/strip
+
+//Path to a program.
+CMAKE_TAPI:FILEPATH=CMAKE_TAPI-NOTFOUND
+
+//If this value is on, makefiles will be generated without the
+// .SILENT directive, and all commands will be echoed to the console
+// during the make.  This is useful for debugging only. With Visual
+// Studio IDE projects all commands are done without /nologo.
+CMAKE_VERBOSE_MAKEFILE:BOOL=FALSE
+
+//Path to a file.
+CURL_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+CURL_LIBRARY_DEBUG:FILEPATH=CURL_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+CURL_LIBRARY_RELEASE:FILEPATH=/usr/lib/libcurl.so
+
+//Path to a file.
+DBUS_ARCH_INCLUDE_DIR:PATH=/usr/lib/dbus-1.0/include
+
+//Path to a file.
+DBUS_INCLUDE_DIR:PATH=/usr/include/dbus-1.0
+
+//Path to a library.
+DBUS_LIBRARIES:FILEPATH=/usr/lib/libdbus-1.so
+
+//Path to a file.
+EIGEN3_INCLUDE_DIR:PATH=EIGEN3_INCLUDE_DIR-NOTFOUND
+
+//Path to a file.
+EXPAT_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+EXPAT_LIBRARY_DEBUG:FILEPATH=EXPAT_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+EXPAT_LIBRARY_RELEASE:FILEPATH=/usr/lib/libexpat.so
+
+//Path to a file.
+GLEW_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+GLEW_SHARED_LIBRARY_DEBUG:FILEPATH=GLEW_SHARED_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+GLEW_SHARED_LIBRARY_RELEASE:FILEPATH=/usr/lib/libGLEW.so
+
+//Path to a library.
+GLEW_STATIC_LIBRARY_DEBUG:FILEPATH=GLEW_STATIC_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+GLEW_STATIC_LIBRARY_RELEASE:FILEPATH=GLEW_STATIC_LIBRARY_RELEASE-NOTFOUND
+
+//Path to a file.
+OPENGL_EGL_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_GLES2_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_GLES3_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_GLU_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_GLX_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+OPENGL_egl_LIBRARY:FILEPATH=/usr/lib/libEGL.so
+
+//Path to a library.
+OPENGL_gl_LIBRARY:FILEPATH=/usr/lib/libGL.so
+
+//Path to a library.
+OPENGL_gles2_LIBRARY:FILEPATH=/usr/lib/libGLESv2.so
+
+//Path to a library.
+OPENGL_gles3_LIBRARY:FILEPATH=/usr/lib/libGLESv2.so
+
+//Path to a library.
+OPENGL_glu_LIBRARY:FILEPATH=/usr/lib/libGLU.so
+
+//Path to a library.
+OPENGL_glx_LIBRARY:FILEPATH=/usr/lib/libGLX.so
+
+//Path to a library.
+OPENGL_opengl_LIBRARY:FILEPATH=/usr/lib/libOpenGL.so
+
+//Path to a file.
+OPENGL_xmesa_INCLUDE_DIR:PATH=OPENGL_xmesa_INCLUDE_DIR-NOTFOUND
+
+//Path to a library.
+OPENSSL_CRYPTO_LIBRARY:FILEPATH=/usr/lib/libcrypto.so
+
+//Path to a file.
+OPENSSL_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+OPENSSL_SSL_LIBRARY:FILEPATH=/usr/lib/libssl.so
+
+//Path to OpenVDB installation's find modules.
+OPENVDB_FIND_MODULE_PATH:PATH=
+
+//Build Orca tools
+ORCA_TOOLS:BOOL=OFF
+
+//Value Computed by CMake
+OrcaSlicer_BINARY_DIR:STATIC=/home/scarjit/Git/OrcaSlicer/cmake-build-debug
+
+//Value Computed by CMake
+OrcaSlicer_IS_TOP_LEVEL:STATIC=ON
+
+//Value Computed by CMake
+OrcaSlicer_SOURCE_DIR:STATIC=/home/scarjit/Git/OrcaSlicer
+
+//Arguments to supply to pkg-config
+PKG_CONFIG_ARGN:STRING=
+
+//pkg-config executable
+PKG_CONFIG_EXECUTABLE:FILEPATH=/usr/bin/pkg-config
+
+//Path to a library.
+PNG_LIBRARY_DEBUG:FILEPATH=PNG_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+PNG_LIBRARY_RELEASE:FILEPATH=/usr/lib/libpng.so
+
+//Path to a file.
+PNG_PNG_INCLUDE_DIR:PATH=/usr/include
+
+//Enable ASan on Clang and GCC
+SLIC3R_ASAN:BOOL=OFF
+
+//Build development sandboxes
+SLIC3R_BUILD_SANDBOXES:BOOL=OFF
+
+//Build unit tests
+SLIC3R_BUILD_TESTS:BOOL=OFF
+
+//Allow perfoming desktop integration during runtime
+SLIC3R_DESKTOP_INTEGRATION:BOOL=ON
+
+//Assume OrcaSlicer is to be installed in a FHS directory structure
+SLIC3R_FHS:BOOL=OFF
+
+//GTK version to use with wxWidgets on Linux
+SLIC3R_GTK:STRING=2
+
+//Compile OrcaSlicer with GUI components (OpenGL, wxWidgets)
+SLIC3R_GUI:BOOL=ON
+
+//Compile on Visual Studio in parallel
+SLIC3R_MSVC_COMPILE_PARALLEL:BOOL=ON
+
+//Generate PDB files on MSVC in Release mode
+SLIC3R_MSVC_PDB:BOOL=ON
+
+//Use precompiled headers
+SLIC3R_PCH:BOOL=ON
+
+//Compile XS Perl module and enable Perl unit and integration tests
+SLIC3R_PERL_XS:BOOL=OFF
+
+//Compile OrcaSlicer with an invasive Shiny profiler
+SLIC3R_PROFILE:BOOL=OFF
+
+//Compile OrcaSlicer with static libraries (Boost, TBB, glew)
+SLIC3R_STATIC:BOOL=OFF
+
+//Build against wxWidgets stable (3.0) as oppsed to dev (3.1) on
+// Linux
+SLIC3R_WX_STABLE:BOOL=OFF
+
+//The directory containing a CMake configuration file for TBB.
+TBB_DIR:PATH=/usr/lib/cmake/TBB
+
+//Path to a file.
+ZLIB_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+ZLIB_LIBRARY_DEBUG:FILEPATH=ZLIB_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+ZLIB_LIBRARY_RELEASE:FILEPATH=/usr/lib/libz.so
+
+//The directory containing a CMake configuration file for boost_atomic.
+boost_atomic_DIR:PATH=/usr/lib/cmake/boost_atomic-1.86.0
+
+//The directory containing a CMake configuration file for boost_chrono.
+boost_chrono_DIR:PATH=/usr/lib/cmake/boost_chrono-1.86.0
+
+//The directory containing a CMake configuration file for boost_date_time.
+boost_date_time_DIR:PATH=/usr/lib/cmake/boost_date_time-1.86.0
+
+//The directory containing a CMake configuration file for boost_filesystem.
+boost_filesystem_DIR:PATH=/usr/lib/cmake/boost_filesystem-1.86.0
+
+//The directory containing a CMake configuration file for boost_headers.
+boost_headers_DIR:PATH=/usr/lib/cmake/boost_headers-1.86.0
+
+//The directory containing a CMake configuration file for boost_iostreams.
+boost_iostreams_DIR:PATH=/usr/lib/cmake/boost_iostreams-1.86.0
+
+//The directory containing a CMake configuration file for boost_locale.
+boost_locale_DIR:PATH=/usr/lib/cmake/boost_locale-1.86.0
+
+//The directory containing a CMake configuration file for boost_log.
+boost_log_DIR:PATH=/usr/lib/cmake/boost_log-1.86.0
+
+//The directory containing a CMake configuration file for boost_program_options.
+boost_program_options_DIR:PATH=/usr/lib/cmake/boost_program_options-1.86.0
+
+//The directory containing a CMake configuration file for boost_regex.
+boost_regex_DIR:PATH=/usr/lib/cmake/boost_regex-1.86.0
+
+//The directory containing a CMake configuration file for boost_system.
+boost_system_DIR:PATH=/usr/lib/cmake/boost_system-1.86.0
+
+//The directory containing a CMake configuration file for boost_thread.
+boost_thread_DIR:PATH=/usr/lib/cmake/boost_thread-1.86.0
+
+//The directory containing a CMake configuration file for cereal.
+cereal_DIR:PATH=cereal_DIR-NOTFOUND
+
+//The directory containing a CMake configuration file for glfw3.
+glfw3_DIR:PATH=/usr/lib/cmake/glfw3
+
+//Path to a library.
+pkgcfg_lib_PC_DBUS_dbus-1:FILEPATH=/usr/lib/libdbus-1.so
+
+//Path to a library.
+pkgcfg_lib_PC_EXPAT_expat:FILEPATH=/usr/lib/libexpat.so
+
+//Path to a library.
+pkgcfg_lib__OPENSSL_crypto:FILEPATH=/usr/lib/libcrypto.so
+
+//Path to a library.
+pkgcfg_lib__OPENSSL_ssl:FILEPATH=/usr/lib/libssl.so
+
+
+########################
+# INTERNAL cache entries
+########################
+
+//ADVANCED property for variable: Boost_DIR
+Boost_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_ADDR2LINE
+CMAKE_ADDR2LINE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_AR
+CMAKE_AR-ADVANCED:INTERNAL=1
+//This is the directory where this CMakeCache.txt was created
+CMAKE_CACHEFILE_DIR:INTERNAL=/home/scarjit/Git/OrcaSlicer/cmake-build-debug
+//Major version of cmake used to create the current loaded cache
+CMAKE_CACHE_MAJOR_VERSION:INTERNAL=3
+//Minor version of cmake used to create the current loaded cache
+CMAKE_CACHE_MINOR_VERSION:INTERNAL=30
+//Patch version of cmake used to create the current loaded cache
+CMAKE_CACHE_PATCH_VERSION:INTERNAL=5
+//Path to CMake executable.
+CMAKE_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake
+//Path to cpack program executable.
+CMAKE_CPACK_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cpack
+//Path to ctest program executable.
+CMAKE_CTEST_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/ctest
+//ADVANCED property for variable: CMAKE_CXX_COMPILER
+CMAKE_CXX_COMPILER-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_COMPILER_AR
+CMAKE_CXX_COMPILER_AR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_COMPILER_RANLIB
+CMAKE_CXX_COMPILER_RANLIB-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS
+CMAKE_CXX_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS_DEBUG
+CMAKE_CXX_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS_MINSIZEREL
+CMAKE_CXX_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELEASE
+CMAKE_CXX_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELWITHDEBINFO
+CMAKE_CXX_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_COMPILER
+CMAKE_C_COMPILER-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_COMPILER_AR
+CMAKE_C_COMPILER_AR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_COMPILER_RANLIB
+CMAKE_C_COMPILER_RANLIB-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS
+CMAKE_C_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS_DEBUG
+CMAKE_C_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS_MINSIZEREL
+CMAKE_C_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS_RELEASE
+CMAKE_C_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS_RELWITHDEBINFO
+CMAKE_C_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_DLLTOOL
+CMAKE_DLLTOOL-ADVANCED:INTERNAL=1
+//Executable file format
+CMAKE_EXECUTABLE_FORMAT:INTERNAL=ELF
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS
+CMAKE_EXE_LINKER_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_DEBUG
+CMAKE_EXE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_MINSIZEREL
+CMAKE_EXE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELEASE
+CMAKE_EXE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO
+CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXPORT_COMPILE_COMMANDS
+CMAKE_EXPORT_COMPILE_COMMANDS-ADVANCED:INTERNAL=1
+//Name of external makefile project generator.
+CMAKE_EXTRA_GENERATOR:INTERNAL=
+//Name of generator.
+CMAKE_GENERATOR:INTERNAL=Ninja
+//Generator instance identifier.
+CMAKE_GENERATOR_INSTANCE:INTERNAL=
+//Name of generator platform.
+CMAKE_GENERATOR_PLATFORM:INTERNAL=
+//Name of generator toolset.
+CMAKE_GENERATOR_TOOLSET:INTERNAL=
+//Test CMAKE_HAVE_LIBC_PTHREAD
+CMAKE_HAVE_LIBC_PTHREAD:INTERNAL=1
+//Source directory with the top level CMakeLists.txt file for this
+// project
+CMAKE_HOME_DIRECTORY:INTERNAL=/home/scarjit/Git/OrcaSlicer
+//ADVANCED property for variable: CMAKE_INSTALL_BINDIR
+CMAKE_INSTALL_BINDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_DATADIR
+CMAKE_INSTALL_DATADIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_DATAROOTDIR
+CMAKE_INSTALL_DATAROOTDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_DOCDIR
+CMAKE_INSTALL_DOCDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_INCLUDEDIR
+CMAKE_INSTALL_INCLUDEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_INFODIR
+CMAKE_INSTALL_INFODIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_LIBDIR
+CMAKE_INSTALL_LIBDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_LIBEXECDIR
+CMAKE_INSTALL_LIBEXECDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_LOCALEDIR
+CMAKE_INSTALL_LOCALEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_LOCALSTATEDIR
+CMAKE_INSTALL_LOCALSTATEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_MANDIR
+CMAKE_INSTALL_MANDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_OLDINCLUDEDIR
+CMAKE_INSTALL_OLDINCLUDEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_RUNSTATEDIR
+CMAKE_INSTALL_RUNSTATEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_SBINDIR
+CMAKE_INSTALL_SBINDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_SHAREDSTATEDIR
+CMAKE_INSTALL_SHAREDSTATEDIR-ADVANCED:INTERNAL=1
+//Install .so files without execute permission.
+CMAKE_INSTALL_SO_NO_EXE:INTERNAL=0
+//ADVANCED property for variable: CMAKE_INSTALL_SYSCONFDIR
+CMAKE_INSTALL_SYSCONFDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_LINKER
+CMAKE_LINKER-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS
+CMAKE_MODULE_LINKER_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_DEBUG
+CMAKE_MODULE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL
+CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELEASE
+CMAKE_MODULE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO
+CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_NM
+CMAKE_NM-ADVANCED:INTERNAL=1
+//number of local generators
+CMAKE_NUMBER_OF_MAKEFILES:INTERNAL=1
+//ADVANCED property for variable: CMAKE_OBJCOPY
+CMAKE_OBJCOPY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_OBJDUMP
+CMAKE_OBJDUMP-ADVANCED:INTERNAL=1
+//Platform information initialized
+CMAKE_PLATFORM_INFO_INITIALIZED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_RANLIB
+CMAKE_RANLIB-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_READELF
+CMAKE_READELF-ADVANCED:INTERNAL=1
+//Path to CMake installation.
+CMAKE_ROOT:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS
+CMAKE_SHARED_LINKER_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_DEBUG
+CMAKE_SHARED_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL
+CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELEASE
+CMAKE_SHARED_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO
+CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SKIP_INSTALL_RPATH
+CMAKE_SKIP_INSTALL_RPATH-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SKIP_RPATH
+CMAKE_SKIP_RPATH-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS
+CMAKE_STATIC_LINKER_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_DEBUG
+CMAKE_STATIC_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL
+CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELEASE
+CMAKE_STATIC_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO
+CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STRIP
+CMAKE_STRIP-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_TAPI
+CMAKE_TAPI-ADVANCED:INTERNAL=1
+//uname command
+CMAKE_UNAME:INTERNAL=/usr/bin/uname
+//ADVANCED property for variable: CMAKE_VERBOSE_MAKEFILE
+CMAKE_VERBOSE_MAKEFILE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CURL_INCLUDE_DIR
+CURL_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CURL_LIBRARY_DEBUG
+CURL_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CURL_LIBRARY_RELEASE
+CURL_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: EIGEN3_INCLUDE_DIR
+EIGEN3_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: EXPAT_INCLUDE_DIR
+EXPAT_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: EXPAT_LIBRARY_DEBUG
+EXPAT_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: EXPAT_LIBRARY_RELEASE
+EXPAT_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//Details about finding Boost
+FIND_PACKAGE_MESSAGE_DETAILS_Boost:INTERNAL=[/usr/lib/cmake/Boost-1.86.0/BoostConfig.cmake][cfound components: system filesystem thread log locale regex chrono atomic date_time iostreams program_options ][v1.86.0(1.66)]
+//Details about finding CURL
+FIND_PACKAGE_MESSAGE_DETAILS_CURL:INTERNAL=[/usr/lib/libcurl.so][/usr/include][v8.11.0()]
+//Details about finding DBus
+FIND_PACKAGE_MESSAGE_DETAILS_DBus:INTERNAL=[/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include][/usr/lib/libdbus-1.so][v()]
+//Details about finding EXPAT
+FIND_PACKAGE_MESSAGE_DETAILS_EXPAT:INTERNAL=[/usr/lib/libexpat.so][/usr/include][v2.6.4()]
+//Details about finding GLEW
+FIND_PACKAGE_MESSAGE_DETAILS_GLEW:INTERNAL=[/usr/include][/usr/lib/libGLEW.so][v2.2.0()]
+//Details about finding OpenGL
+FIND_PACKAGE_MESSAGE_DETAILS_OpenGL:INTERNAL=[/usr/lib/libOpenGL.so][/usr/lib/libGLX.so][/usr/include][c ][v()]
+//Details about finding OpenSSL
+FIND_PACKAGE_MESSAGE_DETAILS_OpenSSL:INTERNAL=[/usr/lib/libcrypto.so][/usr/include][c ][v3.4.0()]
+//Details about finding PNG
+FIND_PACKAGE_MESSAGE_DETAILS_PNG:INTERNAL=[/usr/lib/libpng.so][/usr/include][v1.6.44()]
+//Details about finding PkgConfig
+FIND_PACKAGE_MESSAGE_DETAILS_PkgConfig:INTERNAL=[/usr/bin/pkg-config][v2.1.1()]
+//Details about finding Threads
+FIND_PACKAGE_MESSAGE_DETAILS_Threads:INTERNAL=[TRUE][v()]
+//Details about finding ZLIB
+FIND_PACKAGE_MESSAGE_DETAILS_ZLIB:INTERNAL=[/usr/lib/libz.so][/usr/include][c ][v1.3.1()]
+//ADVANCED property for variable: GLEW_INCLUDE_DIR
+GLEW_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: GLEW_SHARED_LIBRARY_DEBUG
+GLEW_SHARED_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: GLEW_SHARED_LIBRARY_RELEASE
+GLEW_SHARED_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: GLEW_STATIC_LIBRARY_DEBUG
+GLEW_STATIC_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: GLEW_STATIC_LIBRARY_RELEASE
+GLEW_STATIC_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//Have include cereal/cereal.hpp
+HAVE_CEREAL_H:INTERNAL=
+//ADVANCED property for variable: OPENGL_EGL_INCLUDE_DIR
+OPENGL_EGL_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_GLES2_INCLUDE_DIR
+OPENGL_GLES2_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_GLES3_INCLUDE_DIR
+OPENGL_GLES3_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_GLU_INCLUDE_DIR
+OPENGL_GLU_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_GLX_INCLUDE_DIR
+OPENGL_GLX_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_INCLUDE_DIR
+OPENGL_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_egl_LIBRARY
+OPENGL_egl_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_gl_LIBRARY
+OPENGL_gl_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_gles2_LIBRARY
+OPENGL_gles2_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_gles3_LIBRARY
+OPENGL_gles3_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_glu_LIBRARY
+OPENGL_glu_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_glx_LIBRARY
+OPENGL_glx_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_opengl_LIBRARY
+OPENGL_opengl_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_xmesa_INCLUDE_DIR
+OPENGL_xmesa_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENSSL_CRYPTO_LIBRARY
+OPENSSL_CRYPTO_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENSSL_INCLUDE_DIR
+OPENSSL_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENSSL_SSL_LIBRARY
+OPENSSL_SSL_LIBRARY-ADVANCED:INTERNAL=1
+PC_DBUS_CFLAGS:INTERNAL=-I/usr/include/dbus-1.0;-I/usr/lib/dbus-1.0/include
+PC_DBUS_CFLAGS_I:INTERNAL=
+PC_DBUS_CFLAGS_OTHER:INTERNAL=
+PC_DBUS_FOUND:INTERNAL=1
+PC_DBUS_INCLUDEDIR:INTERNAL=/usr/include
+PC_DBUS_INCLUDE_DIRS:INTERNAL=/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
+PC_DBUS_LDFLAGS:INTERNAL=-L/usr/lib;-ldbus-1
+PC_DBUS_LDFLAGS_OTHER:INTERNAL=
+PC_DBUS_LIBDIR:INTERNAL=/usr/lib
+PC_DBUS_LIBRARIES:INTERNAL=dbus-1
+PC_DBUS_LIBRARY_DIRS:INTERNAL=/usr/lib
+PC_DBUS_LIBS:INTERNAL=
+PC_DBUS_LIBS_L:INTERNAL=
+PC_DBUS_LIBS_OTHER:INTERNAL=
+PC_DBUS_LIBS_PATHS:INTERNAL=
+PC_DBUS_MODULE_NAME:INTERNAL=dbus-1
+PC_DBUS_PREFIX:INTERNAL=/usr
+PC_DBUS_STATIC_CFLAGS:INTERNAL=-I/usr/include/dbus-1.0;-I/usr/lib/dbus-1.0/include
+PC_DBUS_STATIC_CFLAGS_I:INTERNAL=
+PC_DBUS_STATIC_CFLAGS_OTHER:INTERNAL=
+PC_DBUS_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
+PC_DBUS_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-ldbus-1;-lsystemd
+PC_DBUS_STATIC_LDFLAGS_OTHER:INTERNAL=
+PC_DBUS_STATIC_LIBDIR:INTERNAL=
+PC_DBUS_STATIC_LIBRARIES:INTERNAL=dbus-1;systemd
+PC_DBUS_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
+PC_DBUS_STATIC_LIBS:INTERNAL=
+PC_DBUS_STATIC_LIBS_L:INTERNAL=
+PC_DBUS_STATIC_LIBS_OTHER:INTERNAL=
+PC_DBUS_STATIC_LIBS_PATHS:INTERNAL=
+PC_DBUS_VERSION:INTERNAL=1.14.10
+PC_DBUS_dbus-1_INCLUDEDIR:INTERNAL=
+PC_DBUS_dbus-1_LIBDIR:INTERNAL=
+PC_DBUS_dbus-1_PREFIX:INTERNAL=
+PC_DBUS_dbus-1_VERSION:INTERNAL=
+PC_EXPAT_CFLAGS:INTERNAL=-I/usr/include
+PC_EXPAT_CFLAGS_I:INTERNAL=
+PC_EXPAT_CFLAGS_OTHER:INTERNAL=
+PC_EXPAT_FOUND:INTERNAL=1
+PC_EXPAT_INCLUDEDIR:INTERNAL=/usr/include
+PC_EXPAT_INCLUDE_DIRS:INTERNAL=/usr/include
+PC_EXPAT_LDFLAGS:INTERNAL=-L/usr/lib;-lexpat
+PC_EXPAT_LDFLAGS_OTHER:INTERNAL=
+PC_EXPAT_LIBDIR:INTERNAL=/usr/lib
+PC_EXPAT_LIBRARIES:INTERNAL=expat
+PC_EXPAT_LIBRARY_DIRS:INTERNAL=/usr/lib
+PC_EXPAT_LIBS:INTERNAL=
+PC_EXPAT_LIBS_L:INTERNAL=
+PC_EXPAT_LIBS_OTHER:INTERNAL=
+PC_EXPAT_LIBS_PATHS:INTERNAL=
+PC_EXPAT_MODULE_NAME:INTERNAL=expat
+PC_EXPAT_PREFIX:INTERNAL=/usr
+PC_EXPAT_STATIC_CFLAGS:INTERNAL=-I/usr/include;-DXML_STATIC
+PC_EXPAT_STATIC_CFLAGS_I:INTERNAL=
+PC_EXPAT_STATIC_CFLAGS_OTHER:INTERNAL=-DXML_STATIC
+PC_EXPAT_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include
+PC_EXPAT_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-lexpat;-lm
+PC_EXPAT_STATIC_LDFLAGS_OTHER:INTERNAL=
+PC_EXPAT_STATIC_LIBDIR:INTERNAL=
+PC_EXPAT_STATIC_LIBRARIES:INTERNAL=expat;m
+PC_EXPAT_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
+PC_EXPAT_STATIC_LIBS:INTERNAL=
+PC_EXPAT_STATIC_LIBS_L:INTERNAL=
+PC_EXPAT_STATIC_LIBS_OTHER:INTERNAL=
+PC_EXPAT_STATIC_LIBS_PATHS:INTERNAL=
+PC_EXPAT_VERSION:INTERNAL=2.6.4
+PC_EXPAT_expat_INCLUDEDIR:INTERNAL=
+PC_EXPAT_expat_LIBDIR:INTERNAL=
+PC_EXPAT_expat_PREFIX:INTERNAL=
+PC_EXPAT_expat_VERSION:INTERNAL=
+//ADVANCED property for variable: PKG_CONFIG_ARGN
+PKG_CONFIG_ARGN-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: PKG_CONFIG_EXECUTABLE
+PKG_CONFIG_EXECUTABLE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: PNG_LIBRARY_DEBUG
+PNG_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: PNG_LIBRARY_RELEASE
+PNG_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: PNG_PNG_INCLUDE_DIR
+PNG_PNG_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: ZLIB_INCLUDE_DIR
+ZLIB_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: ZLIB_LIBRARY_DEBUG
+ZLIB_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: ZLIB_LIBRARY_RELEASE
+ZLIB_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//linker supports push/pop state
+_CMAKE_LINKER_PUSHPOP_STATE_SUPPORTED:INTERNAL=TRUE
+//CMAKE_INSTALL_PREFIX during last run
+_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX:INTERNAL=/usr/local
+_OPENSSL_CFLAGS:INTERNAL=-I/usr/include
+_OPENSSL_CFLAGS_I:INTERNAL=
+_OPENSSL_CFLAGS_OTHER:INTERNAL=
+_OPENSSL_FOUND:INTERNAL=1
+_OPENSSL_INCLUDEDIR:INTERNAL=/usr/include
+_OPENSSL_INCLUDE_DIRS:INTERNAL=/usr/include
+_OPENSSL_LDFLAGS:INTERNAL=-L/usr/lib;-lssl;-lcrypto
+_OPENSSL_LDFLAGS_OTHER:INTERNAL=
+_OPENSSL_LIBDIR:INTERNAL=/usr/lib
+_OPENSSL_LIBRARIES:INTERNAL=ssl;crypto
+_OPENSSL_LIBRARY_DIRS:INTERNAL=/usr/lib
+_OPENSSL_LIBS:INTERNAL=
+_OPENSSL_LIBS_L:INTERNAL=
+_OPENSSL_LIBS_OTHER:INTERNAL=
+_OPENSSL_LIBS_PATHS:INTERNAL=
+_OPENSSL_MODULE_NAME:INTERNAL=openssl
+_OPENSSL_PREFIX:INTERNAL=/usr
+_OPENSSL_STATIC_CFLAGS:INTERNAL=-I/usr/include
+_OPENSSL_STATIC_CFLAGS_I:INTERNAL=
+_OPENSSL_STATIC_CFLAGS_OTHER:INTERNAL=
+_OPENSSL_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include
+_OPENSSL_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-lssl;-lcrypto;-ldl;-pthread;-L/usr/lib;-lcrypto;-ldl;-pthread
+_OPENSSL_STATIC_LDFLAGS_OTHER:INTERNAL=-pthread;-pthread
+_OPENSSL_STATIC_LIBDIR:INTERNAL=
+_OPENSSL_STATIC_LIBRARIES:INTERNAL=ssl;crypto;dl;crypto;dl
+_OPENSSL_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib;/usr/lib
+_OPENSSL_STATIC_LIBS:INTERNAL=
+_OPENSSL_STATIC_LIBS_L:INTERNAL=
+_OPENSSL_STATIC_LIBS_OTHER:INTERNAL=
+_OPENSSL_STATIC_LIBS_PATHS:INTERNAL=
+_OPENSSL_VERSION:INTERNAL=3.4.0
+_OPENSSL_openssl_INCLUDEDIR:INTERNAL=
+_OPENSSL_openssl_LIBDIR:INTERNAL=
+_OPENSSL_openssl_PREFIX:INTERNAL=
+_OPENSSL_openssl_VERSION:INTERNAL=
+__pkg_config_arguments_PC_DBUS:INTERNAL=QUIET;dbus-1
+__pkg_config_arguments_PC_EXPAT:INTERNAL=QUIET;expat
+__pkg_config_arguments__OPENSSL:INTERNAL=QUIET;openssl
+__pkg_config_checked_PC_DBUS:INTERNAL=1
+__pkg_config_checked_PC_EXPAT:INTERNAL=1
+__pkg_config_checked__OPENSSL:INTERNAL=1
+//ADVANCED property for variable: boost_atomic_DIR
+boost_atomic_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_chrono_DIR
+boost_chrono_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_date_time_DIR
+boost_date_time_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_filesystem_DIR
+boost_filesystem_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_headers_DIR
+boost_headers_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_iostreams_DIR
+boost_iostreams_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_locale_DIR
+boost_locale_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_log_DIR
+boost_log_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_program_options_DIR
+boost_program_options_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_regex_DIR
+boost_regex_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_system_DIR
+boost_system_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_thread_DIR
+boost_thread_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: pkgcfg_lib_PC_DBUS_dbus-1
+pkgcfg_lib_PC_DBUS_dbus-1-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: pkgcfg_lib_PC_EXPAT_expat
+pkgcfg_lib_PC_EXPAT_expat-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: pkgcfg_lib__OPENSSL_crypto
+pkgcfg_lib__OPENSSL_crypto-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: pkgcfg_lib__OPENSSL_ssl
+pkgcfg_lib__OPENSSL_ssl-ADVANCED:INTERNAL=1
+prefix_result:INTERNAL=/usr/lib
+
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
new file mode 100644
index 00000000000..d69cb8dd938
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
@@ -0,0 +1,81 @@
+set(CMAKE_C_COMPILER "/usr/bin/cc")
+set(CMAKE_C_COMPILER_ARG1 "")
+set(CMAKE_C_COMPILER_ID "GNU")
+set(CMAKE_C_COMPILER_VERSION "14.2.1")
+set(CMAKE_C_COMPILER_VERSION_INTERNAL "")
+set(CMAKE_C_COMPILER_WRAPPER "")
+set(CMAKE_C_STANDARD_COMPUTED_DEFAULT "17")
+set(CMAKE_C_EXTENSIONS_COMPUTED_DEFAULT "ON")
+set(CMAKE_C_STANDARD_LATEST "23")
+set(CMAKE_C_COMPILE_FEATURES "c_std_90;c_function_prototypes;c_std_99;c_restrict;c_variadic_macros;c_std_11;c_static_assert;c_std_17;c_std_23")
+set(CMAKE_C90_COMPILE_FEATURES "c_std_90;c_function_prototypes")
+set(CMAKE_C99_COMPILE_FEATURES "c_std_99;c_restrict;c_variadic_macros")
+set(CMAKE_C11_COMPILE_FEATURES "c_std_11;c_static_assert")
+set(CMAKE_C17_COMPILE_FEATURES "c_std_17")
+set(CMAKE_C23_COMPILE_FEATURES "c_std_23")
+
+set(CMAKE_C_PLATFORM_ID "Linux")
+set(CMAKE_C_SIMULATE_ID "")
+set(CMAKE_C_COMPILER_FRONTEND_VARIANT "GNU")
+set(CMAKE_C_SIMULATE_VERSION "")
+
+
+
+
+set(CMAKE_AR "/usr/bin/ar")
+set(CMAKE_C_COMPILER_AR "/usr/bin/gcc-ar")
+set(CMAKE_RANLIB "/usr/bin/ranlib")
+set(CMAKE_C_COMPILER_RANLIB "/usr/bin/gcc-ranlib")
+set(CMAKE_LINKER "/usr/bin/ld")
+set(CMAKE_LINKER_LINK "")
+set(CMAKE_LINKER_LLD "")
+set(CMAKE_C_COMPILER_LINKER "/usr/bin/ld")
+set(CMAKE_C_COMPILER_LINKER_ID "GNU")
+set(CMAKE_C_COMPILER_LINKER_VERSION 2.43.0)
+set(CMAKE_C_COMPILER_LINKER_FRONTEND_VARIANT GNU)
+set(CMAKE_MT "")
+set(CMAKE_TAPI "CMAKE_TAPI-NOTFOUND")
+set(CMAKE_COMPILER_IS_GNUCC 1)
+set(CMAKE_C_COMPILER_LOADED 1)
+set(CMAKE_C_COMPILER_WORKS TRUE)
+set(CMAKE_C_ABI_COMPILED TRUE)
+
+set(CMAKE_C_COMPILER_ENV_VAR "CC")
+
+set(CMAKE_C_COMPILER_ID_RUN 1)
+set(CMAKE_C_SOURCE_FILE_EXTENSIONS c;m)
+set(CMAKE_C_IGNORE_EXTENSIONS h;H;o;O;obj;OBJ;def;DEF;rc;RC)
+set(CMAKE_C_LINKER_PREFERENCE 10)
+set(CMAKE_C_LINKER_DEPFILE_SUPPORTED FALSE)
+
+# Save compiler ABI information.
+set(CMAKE_C_SIZEOF_DATA_PTR "8")
+set(CMAKE_C_COMPILER_ABI "ELF")
+set(CMAKE_C_BYTE_ORDER "LITTLE_ENDIAN")
+set(CMAKE_C_LIBRARY_ARCHITECTURE "")
+
+if(CMAKE_C_SIZEOF_DATA_PTR)
+  set(CMAKE_SIZEOF_VOID_P "${CMAKE_C_SIZEOF_DATA_PTR}")
+endif()
+
+if(CMAKE_C_COMPILER_ABI)
+  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_C_COMPILER_ABI}")
+endif()
+
+if(CMAKE_C_LIBRARY_ARCHITECTURE)
+  set(CMAKE_LIBRARY_ARCHITECTURE "")
+endif()
+
+set(CMAKE_C_CL_SHOWINCLUDES_PREFIX "")
+if(CMAKE_C_CL_SHOWINCLUDES_PREFIX)
+  set(CMAKE_CL_SHOWINCLUDES_PREFIX "${CMAKE_C_CL_SHOWINCLUDES_PREFIX}")
+endif()
+
+
+
+
+
+set(CMAKE_C_IMPLICIT_INCLUDE_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include")
+set(CMAKE_C_IMPLICIT_LINK_LIBRARIES "gcc;gcc_s;c;gcc;gcc_s")
+set(CMAKE_C_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib")
+set(CMAKE_C_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "")
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
new file mode 100644
index 00000000000..7a492576727
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
@@ -0,0 +1,105 @@
+set(CMAKE_CXX_COMPILER "/usr/bin/c++")
+set(CMAKE_CXX_COMPILER_ARG1 "")
+set(CMAKE_CXX_COMPILER_ID "GNU")
+set(CMAKE_CXX_COMPILER_VERSION "14.2.1")
+set(CMAKE_CXX_COMPILER_VERSION_INTERNAL "")
+set(CMAKE_CXX_COMPILER_WRAPPER "")
+set(CMAKE_CXX_STANDARD_COMPUTED_DEFAULT "17")
+set(CMAKE_CXX_EXTENSIONS_COMPUTED_DEFAULT "ON")
+set(CMAKE_CXX_STANDARD_LATEST "26")
+set(CMAKE_CXX_COMPILE_FEATURES "cxx_std_98;cxx_template_template_parameters;cxx_std_11;cxx_alias_templates;cxx_alignas;cxx_alignof;cxx_attributes;cxx_auto_type;cxx_constexpr;cxx_decltype;cxx_decltype_incomplete_return_types;cxx_default_function_template_args;cxx_defaulted_functions;cxx_defaulted_move_initializers;cxx_delegating_constructors;cxx_deleted_functions;cxx_enum_forward_declarations;cxx_explicit_conversions;cxx_extended_friend_declarations;cxx_extern_templates;cxx_final;cxx_func_identifier;cxx_generalized_initializers;cxx_inheriting_constructors;cxx_inline_namespaces;cxx_lambdas;cxx_local_type_template_args;cxx_long_long_type;cxx_noexcept;cxx_nonstatic_member_init;cxx_nullptr;cxx_override;cxx_range_for;cxx_raw_string_literals;cxx_reference_qualified_functions;cxx_right_angle_brackets;cxx_rvalue_references;cxx_sizeof_member;cxx_static_assert;cxx_strong_enums;cxx_thread_local;cxx_trailing_return_types;cxx_unicode_literals;cxx_uniform_initialization;cxx_unrestricted_unions;cxx_user_literals;cxx_variadic_macros;cxx_variadic_templates;cxx_std_14;cxx_aggregate_default_initializers;cxx_attribute_deprecated;cxx_binary_literals;cxx_contextual_conversions;cxx_decltype_auto;cxx_digit_separators;cxx_generic_lambdas;cxx_lambda_init_captures;cxx_relaxed_constexpr;cxx_return_type_deduction;cxx_variable_templates;cxx_std_17;cxx_std_20;cxx_std_23;cxx_std_26")
+set(CMAKE_CXX98_COMPILE_FEATURES "cxx_std_98;cxx_template_template_parameters")
+set(CMAKE_CXX11_COMPILE_FEATURES "cxx_std_11;cxx_alias_templates;cxx_alignas;cxx_alignof;cxx_attributes;cxx_auto_type;cxx_constexpr;cxx_decltype;cxx_decltype_incomplete_return_types;cxx_default_function_template_args;cxx_defaulted_functions;cxx_defaulted_move_initializers;cxx_delegating_constructors;cxx_deleted_functions;cxx_enum_forward_declarations;cxx_explicit_conversions;cxx_extended_friend_declarations;cxx_extern_templates;cxx_final;cxx_func_identifier;cxx_generalized_initializers;cxx_inheriting_constructors;cxx_inline_namespaces;cxx_lambdas;cxx_local_type_template_args;cxx_long_long_type;cxx_noexcept;cxx_nonstatic_member_init;cxx_nullptr;cxx_override;cxx_range_for;cxx_raw_string_literals;cxx_reference_qualified_functions;cxx_right_angle_brackets;cxx_rvalue_references;cxx_sizeof_member;cxx_static_assert;cxx_strong_enums;cxx_thread_local;cxx_trailing_return_types;cxx_unicode_literals;cxx_uniform_initialization;cxx_unrestricted_unions;cxx_user_literals;cxx_variadic_macros;cxx_variadic_templates")
+set(CMAKE_CXX14_COMPILE_FEATURES "cxx_std_14;cxx_aggregate_default_initializers;cxx_attribute_deprecated;cxx_binary_literals;cxx_contextual_conversions;cxx_decltype_auto;cxx_digit_separators;cxx_generic_lambdas;cxx_lambda_init_captures;cxx_relaxed_constexpr;cxx_return_type_deduction;cxx_variable_templates")
+set(CMAKE_CXX17_COMPILE_FEATURES "cxx_std_17")
+set(CMAKE_CXX20_COMPILE_FEATURES "cxx_std_20")
+set(CMAKE_CXX23_COMPILE_FEATURES "cxx_std_23")
+set(CMAKE_CXX26_COMPILE_FEATURES "cxx_std_26")
+
+set(CMAKE_CXX_PLATFORM_ID "Linux")
+set(CMAKE_CXX_SIMULATE_ID "")
+set(CMAKE_CXX_COMPILER_FRONTEND_VARIANT "GNU")
+set(CMAKE_CXX_SIMULATE_VERSION "")
+
+
+
+
+set(CMAKE_AR "/usr/bin/ar")
+set(CMAKE_CXX_COMPILER_AR "/usr/bin/gcc-ar")
+set(CMAKE_RANLIB "/usr/bin/ranlib")
+set(CMAKE_CXX_COMPILER_RANLIB "/usr/bin/gcc-ranlib")
+set(CMAKE_LINKER "/usr/bin/ld")
+set(CMAKE_LINKER_LINK "")
+set(CMAKE_LINKER_LLD "")
+set(CMAKE_CXX_COMPILER_LINKER "/usr/bin/ld")
+set(CMAKE_CXX_COMPILER_LINKER_ID "GNU")
+set(CMAKE_CXX_COMPILER_LINKER_VERSION 2.43.0)
+set(CMAKE_CXX_COMPILER_LINKER_FRONTEND_VARIANT GNU)
+set(CMAKE_MT "")
+set(CMAKE_TAPI "CMAKE_TAPI-NOTFOUND")
+set(CMAKE_COMPILER_IS_GNUCXX 1)
+set(CMAKE_CXX_COMPILER_LOADED 1)
+set(CMAKE_CXX_COMPILER_WORKS TRUE)
+set(CMAKE_CXX_ABI_COMPILED TRUE)
+
+set(CMAKE_CXX_COMPILER_ENV_VAR "CXX")
+
+set(CMAKE_CXX_COMPILER_ID_RUN 1)
+set(CMAKE_CXX_SOURCE_FILE_EXTENSIONS C;M;c++;cc;cpp;cxx;m;mm;mpp;CPP;ixx;cppm;ccm;cxxm;c++m)
+set(CMAKE_CXX_IGNORE_EXTENSIONS inl;h;hpp;HPP;H;o;O;obj;OBJ;def;DEF;rc;RC)
+
+foreach (lang IN ITEMS C OBJC OBJCXX)
+  if (CMAKE_${lang}_COMPILER_ID_RUN)
+    foreach(extension IN LISTS CMAKE_${lang}_SOURCE_FILE_EXTENSIONS)
+      list(REMOVE_ITEM CMAKE_CXX_SOURCE_FILE_EXTENSIONS ${extension})
+    endforeach()
+  endif()
+endforeach()
+
+set(CMAKE_CXX_LINKER_PREFERENCE 30)
+set(CMAKE_CXX_LINKER_PREFERENCE_PROPAGATES 1)
+set(CMAKE_CXX_LINKER_DEPFILE_SUPPORTED FALSE)
+
+# Save compiler ABI information.
+set(CMAKE_CXX_SIZEOF_DATA_PTR "8")
+set(CMAKE_CXX_COMPILER_ABI "ELF")
+set(CMAKE_CXX_BYTE_ORDER "LITTLE_ENDIAN")
+set(CMAKE_CXX_LIBRARY_ARCHITECTURE "")
+
+if(CMAKE_CXX_SIZEOF_DATA_PTR)
+  set(CMAKE_SIZEOF_VOID_P "${CMAKE_CXX_SIZEOF_DATA_PTR}")
+endif()
+
+if(CMAKE_CXX_COMPILER_ABI)
+  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_CXX_COMPILER_ABI}")
+endif()
+
+if(CMAKE_CXX_LIBRARY_ARCHITECTURE)
+  set(CMAKE_LIBRARY_ARCHITECTURE "")
+endif()
+
+set(CMAKE_CXX_CL_SHOWINCLUDES_PREFIX "")
+if(CMAKE_CXX_CL_SHOWINCLUDES_PREFIX)
+  set(CMAKE_CL_SHOWINCLUDES_PREFIX "${CMAKE_CXX_CL_SHOWINCLUDES_PREFIX}")
+endif()
+
+
+
+
+
+set(CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES "/usr/include/c++/14.2.1;/usr/include/c++/14.2.1/x86_64-pc-linux-gnu;/usr/include/c++/14.2.1/backward;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include")
+set(CMAKE_CXX_IMPLICIT_LINK_LIBRARIES "stdc++;m;gcc_s;gcc;c;gcc_s;gcc")
+set(CMAKE_CXX_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib")
+set(CMAKE_CXX_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "")
+set(CMAKE_CXX_COMPILER_CLANG_RESOURCE_DIR "")
+
+set(CMAKE_CXX_COMPILER_IMPORT_STD "")
+### Imported target for C++23 standard library
+set(CMAKE_CXX23_COMPILER_IMPORT_STD_NOT_FOUND_MESSAGE "Toolchain does not support discovering `import std` support")
+
+
+### Imported target for C++26 standard library
+set(CMAKE_CXX26_COMPILER_IMPORT_STD_NOT_FOUND_MESSAGE "Toolchain does not support discovering `import std` support")
+
+
+
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin b/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin
new file mode 100755
index 0000000000000000000000000000000000000000..6f4e7c0e50420bf30feec79c4ad403f23f067405
GIT binary patch
literal 15448
zcmeHOU2Ggz6~4Q68mGkBO&SNc3C*aWsFCo*b{)$NO1t)Y?ODk`A>9a2lupOqu{~nF
zYj($A7ic2_D61&Q2nl$gQY55Gya7T~eQ7rs_2;Rn5K@JBFomMDN=XnD8Hl``GjqQ6
zc(N`PAYMAhnmKd6bH01;ocX&ubNqB>Y$P6wDM*WYM6snMeIzB0&mNZzQYkf{+G%}A
z9aMLb-Rfb!Kjka(`tnA6t8Np#g*5Xzd83Iw<ipg5FBl<f=4~hIJA4nclKo(w=Moz@
z^fS@{H1I}$n)Ddbt-^y2@;En1-RC7A*{YS~rA;(=Y%)(1o+do#E7Bh{^2s^jWkB*7
z)+zF_q`b9KVcwGP!g^TZp}7y1$KG=D|4DzRgtwx3&8V=(@rFi!pC%sX<%0?i^J(dC
zyW?<6@(C@bI#zI|`umO*@?8a|xVY4{G|=DG-=|kfdapMG9#=Old`^u{oKf-fs>T@j
zF%{cl$Hk@)PdIizEu41d|Ng13Tp4}k>1XGU{PsJO?{vn8Uwg62F}xq#CdaTa#tVdf
zSb%*H&76Hr0@H+PO>lD?ytoa158)3qX-AnRWp>)ExK`OU=Pjp5$n=tB&NxM@;5=z7
zc5|Nl)#zAuC~fxYz54OS_CtNj%;v_;yj`|uor-IhbK~hksc7e{se(;y&CZvK(z@w~
zHVssC0n#y|KmWv!k<H`9d9!$*vx|?;Ck6Z2x4%oLU!3lIzTkSsb(Gxe<DGK70<TGf
zZ7JUm9CqzdALnzMj|t?J0M7RW$h812m#pV{BY+3bkF@|Uw?;G-=_mtH2BHi^8Hh3v
zWgyBxlz|Un2L6(`{~yMM8*Rp=9aoPjWqhON#_QLN3%_hz^|HbKo_Dj=*B>{kZyFc=
zaO+eq(^Knt)wq1}Hxy9s_%gBnI-@5Jf8C2G{CRHY@{XUfdU)OKpr#*}rgzoX5{J)o
z;HqefuX^#vzsBn5hEcs`T>aCd#?|!}BleQ<`i8ro8t9S++UjdFiNnL2d>-HVlNoZW
z#fQ!q7f#;In@065x81mO@(3CAj&=GieSNxKufMe85CO4stDECpo!Q(@98M{2@9kNN
zJwt6&zk0){F0Q?txy?hql(}Ji-?-fI_8z4YKW|MYUZ}+~w*}qLyL^*9&$Y%A&xJkj
zHS=`TLoMAtx7s)!jU&KaM-pWq%0QHXC<9Rjq6|bCh%yjmAj&|LfhYq}2L8JY@OQ8G
zlkCLE<cSJ>mn+Sf`31LpwtL`QFn%ICIWl#^T{i7<$<CiGXNSzuiA;8QVo-T;9)D`t
zwarqQzS*4}%jR-p88b66oE@B?2+wa#IcKR3feEpLEuZ3VzdWjyoAo+>Z>!#_*H4jV
z;cuoau_sTf*itffaQDu(75Z?-IP*>s=LiQ3@ASUBG1f;*54G_n#s~K#zZp-r-xV(t
zlYvO03`7}-G7x1T%0QHXC<9Rjq6|bCh%)fu%mC^bQMZViM6Qiw+3l-Fp=7(*D^mY>
zuh^)MJSaAPYTYL`>LmI184LXHZPZI_*QB@+HH!;U)W~&`ENkMw+c(uk(H{}rDY`>6
z)K1wLkcQE3O>ipu^aT8W*8TAi=!I^G-6nkcQtXWvd7_`0p1m&P{kzz~T21NV|Ef?w
zzFnuNM;%S4PiPNPweeA{r;jRcd$iu}-oEaEZYsfT?s~YVd%H#n=e)G4Ki9({d|YB`
zk4kC2=Y9#`witgxa8YVP@bd!Dm-B`+YyUIkjj4N7c)y?UScyj6IU1>W@g3^A)XM^|
z(nhm7>1PSo5ERgFdiVjQQUQ=Qe?iM$+AmG>ah#XGA~UHDsAS5=vF756eergM>k9Z9
zZE$?J{dWo1XbH=00`|raC>&q-cg6hifF!4@>Lfg=KB_uXi1hUzN$sPnU-RCoDCNCl
zA?#xkA0Gcv!a4q4xi5I{UMOBCoW~Q6KS8)g{;=c-e;^E!T_Sv6oUV2mPa`BfZhhWP
zr%Uq-PQfk@4rTRe<rHU1=H^Q%bIO@D?PA`sig&mQj_VfeEna#%rOe^aO$?4_(^Ozi
z*M^xf%#qWB;~CQ!KCR5rvB{yqF>`Wc<grZ7%nc6F3$8os+*2rL|2HM<-e3c7+>~kO
zE!R?9Ax{G_+3*Y8@2GY+^Ocf0XBG2Y37?&$sJv4&7b|w28Y$AsoT^lWE2Z~TJ<l)W
z%=fF6-&&yG*bgqtH)%{R9o5S6ylYL7cFVq=!<JK|8vO;O7fY_K&lVT;g>q@ZF1yPC
zXll`+f3$G&0?|S1a;;hAh0j@)Ii=^9i`0d$-LmibqFt^yrQ#ODBwyJsSWHm5H#pt3
zmt3WL+0)A<FPFMKXU>$ZdE1=J69bmdFs*XgqTw+E+ti#j?@Uu)C2EUS`a*#={KhD$
zN}n#x&)Y@H#s5b5xk;yZ<LzvxJV2oF+(d628<dZe!Oyz5fCIvZP6-Z$=OFBU+6eNO
zgb)1*1d7J}18_FP|AFwKH3W(d^ZEY$H+ptr{Fo0wWB)N92#?<)KF<Zf$9w^LMf&A^
z<lKRe=e|Q24;g&SKcFv?FDT*se}SAlHvk{=0cgylFn+{AKSg|=Yrw{Q1Dc<cEaCC{
zs8W|{gL4W#<~z_e2}J+l{r?{Md7t2K+-K!}i+P<iv*mx17<-16ARo^S=!H<i!ng4s
zhWL06LSx>^eX)ekpC1v%U10x}Mh1)Kt<|@D)mRJMuzx~ZLH>#aK;!%aA>99qA^wkr
z51j*1H1ZGlRodV=j$Aeh^J)AaTR0vz^skAV2=FoA?$ik+L7Z=G+Q5HD4nFqiAM+^u
zU*Z)`4hf%sEa2fdzC##?fRF!ksvYBKr5^NEV+}s^P4Wc!n3r7_KCV+V03P&uh_6x-
zDHjgL8Ro;@pbc&d<Hvj@DSY&Ucu5CL)j|Mc65hbU=lg3=zz^!ixf=*Hq``~g<lj@f
mXu)`p7sfF509{?{^{qv8B+igYbJgbj41Y``*&QN;O!Y4&j*!#<

literal 0
HcmV?d00001

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin b/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin
new file mode 100755
index 0000000000000000000000000000000000000000..66c99e8612cf056b64d38a16057ec51886004a16
GIT binary patch
literal 15464
zcmeHOU2Ggz6~4Q68VBO6Q{pzQLo+I<Y7{*Fsbe{*OxHha&r1FYsUrd*OxL?(d&GKo
znH?9q64b&4VTDvKLQo0%fOzUt0U-(xz(z(bc}pIUBE*BKsBo)5jA$V(k(YC3&bJwl
z*5yy)p_*&WeD{3koO|z_JL9=KbLQ#P*hoAUQz#AU<BBD%#b=VDm^&dAf~4wG&9pzF
z+SFYnH+r0}Px?Swzg&;+#3tbz2-)v2SL)yqpQb+if)O&Z-)=?Y0Z{=eIS%&Q!wQkZ
z_=0o*gud3F#?DkUZ(qYk@dF0^cqkj~zWql3PVAJp^a;X`MfTegzb)|tUX}iUh$qK{
zw?2ty7?Y&qlJxdUh5Z)AFO0)t59B_$JpQ_y`)~R?Eq-g7*Nh4y<{OCqK0$smwZ7xO
z*khW{NPoM{gC_9@N_bUA-k$F5>B#5W^LAljv3;?xx4pMVFBkQ0uV)@tCvALAjZU0Z
z@nuzE4*oF}+abqACKIo)?IGGY?Cf9s-8*f^zj@7Q{@%hffB*UA+=~NNoNf3xxJ|a<
z!W?fXtiuNG-@$Wa^k5ys5#sKy!}B<_Iz0DXkN?;%yfV$%`C`E=yBWtdO=YI1#?74N
zShIH7wVbK(p?tAmO=YI@manU?F==|T(#U+qE>N@C#f&*)7czPKDNB*M?B=q^kMoT6
zvN&I>&1T7yr7q^PK0i8^9vm{e^+$RXs@=NxKQB&mM6*eMTw*G&o+ZTj_2cKhMW<zh
zdS1AN`|W*-Y`)LNRB+wndTTl8^P6&AgRe+~O-Wx59&+U|pXY19ABivjI>5`R>?y7W
zc)7Ga{(689o<|!2-upl4Hy`bz2t*NxA`nF&ia->BC<0Lg-e(c`YvO@-jg=cs#>G8X
zI+QZLQgP$etH#Q&n%2D|WqsG5(yP}#YplLzto&i?^i-;=(sjkS)c;#DsJ5<<*IP4s
z;^;G;J@G%|b}sGt5yQz_ZYwoCBTetCZX}K_v*EfR*{^!`C%(*ZY};7fGA{r5G2`;B
z1|#;0ac$c@L=Bvf2AZlHGl`?acl>#L%l#=*tA$6-8Y}&8>QpsWUw500i~SD~Uv0fk
z)MmC?t-iA72obRh>vzVxK69s@IGR-4-W#)IdzRW*{o)N{bz$Sx)NLN}#ncVsdE-*+
z8wZq1{G_oZ@rz0<bz9g&e8@Lh^KxT6@p4%6c0EmNHPq7W3+uJ{sLcR(9hE2oQ3Rq0
zL=lK05Je!0Koo%}0#O8_2t*NxBJjUOfZu1mS4mHdOr9#!E4AW`nJc-@`OdxzLHmjH
z<jC|XcgeJzqLn-EqzBE>iBx)cVnBIzp8xccYnerdUh|zFOHWOWrOedCaC%^ZEIfT?
z+CEQt2<#ARYj~93{qm^RZdR*(gsWTC>S;nQ{LYk1?5Q&<w%8JD+rPJIjb4Z`&wi)L
z=OH#2-s`<lW3Gp`E^6Zo%nuxB`D%Qq`L4J_o=ij~ia->BC<0Lgq6kD0h$0Y0Ac{Z~
zfhYp+j|d>&5c!439h{ZJgZyMjUJl96io9PC36RYquSs6xeIg_8u}x(B)Vg0}<UjK7
zGcM4-y<IJ`T#=+j<RX?NS&{P}xon931HPzU68xaxVZl~Gz+S05Aq}J7itv=Y=@t0@
zqw0@`NY8Xz<WBLYH^ts~5l8x&>B*Yt-w`>OgDGA7Ujg~!yLE~@)6t=!Q`*CnZG24Y
z>e0LPF0H$>yQj0S^Mu+(b+W5-w?>KQxHPK2RKq5Gp2XAvrD?tf^VA`HQuqgawVD+E
z3E>5lBmA-u^hUi_>h=4yr%lxI&SCrws>IZXR5(uG@%UD?DfzLm{~=Xc)IF*t3C73c
zF{L!(Rfzv7sSncelF}>4y?vFW2YqVC{xy>BR{Pa`a$R}PE{OXhZ3pA`D9jg}-eUWB
zv%+-<{$1uF1h9j~$?a>BckDegA^p9~$LT5(9xfjyp8E|S?=j*z4&meN_4s?$;Urq{
z@loN!?Tiwy?KJhI>@K{s3$KR8GoQ1D&Yc@7&X?@G<qQm_^=zr6%ukPX_1cA*q8WIa
z#ca3F-g!o4PTRAlRmj;HN-HP*NzW^w&)cq>w*n@8o&`O{qBL~6bj*}tj+_}7PnpK>
z8D$QCYGPnKJ*3RhvB|-KF>`Wc<nh#$IW;gy55kmb<uY!Da@{8>ojqq4%!RU*3#GFs
zgDL5f?w%_b&ACh=$9eLU_Rd|0a^h=Vl+$jKg-a%sU(e6pIPu=(e*F}B8bpEnoGzC^
zyjNO&oeciES^7#ZFU`A|X+qcWaSk=RK-vB!r5B2>rOy@?^paC7S&q9Dpr#jW`u@Vs
z2}Lv6?q+6{XFiuH&nZ2(RG=<=bRA#wq~(<DVqu41lFqU68Fo;*7Yp6B7G0%#q0^nB
zHwn5mXU;g8dCQ#3kq0E-!^}8NhK9!;s8e&9c{@ve6{#)S>7_hX{KhDnO3xPO=dFTU
z=gj`kD87%<DPMb9dsuELK-@>sD%%FjM@Zm%UtGvO@dqY_2jIR4xtA(I|3&c!eiVj+
z`2Pkv9rFLK_yaW<3WohZN&MgFUW)N!eE`JqV|@@Fe}?>dZ2*6)AAoDpFCQbv4*pmN
z*u?RW;g9tQ@Fmg(OE~_YCnc{H;E(kI5bG+8A9lbmkw33JAY=VeL+Ly`evIi7RXC>b
z$NC3Y5kvGJKK^f$o{tIo+WkT96Ika-GdsRfV(tang8sPg0862Og>FCI_cTF&+~<H;
zhwj$@i_$-iUuj|~i1n?oH8o_u-*f-)U(<XI5a*xI?)*lJxnI&2^#6gztWv-!U##sB
ze-Kxw!fPA3Y--;X;k&l5J!If-$Tt!2$NGCyzB7a!nRo><@b|>>+@pW2lklA)zDMNq
zj|==Tk8cvk#}9ve&s5<BAC-rFsO{koyh)m%Kh|TL;*aYT4Zsh0E99?|V%g~<#wl!V
z{E)Y)!fj#vSiiK0Kl*_^k2P2th+t04YbyBj|JPuFe-Lr*1?>!J@N1&v-&g#b2;)Iq
j_7R7%2mP;h`_k9ZktjnVtzGN;e}-SKQQ04I2#M;S&VRIx

literal 0
HcmV?d00001

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
new file mode 100644
index 00000000000..b0b76c86f9e
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
@@ -0,0 +1,15 @@
+set(CMAKE_HOST_SYSTEM "Linux-6.10.2-273-tkg-eevdf")
+set(CMAKE_HOST_SYSTEM_NAME "Linux")
+set(CMAKE_HOST_SYSTEM_VERSION "6.10.2-273-tkg-eevdf")
+set(CMAKE_HOST_SYSTEM_PROCESSOR "x86_64")
+
+
+
+set(CMAKE_SYSTEM "Linux-6.10.2-273-tkg-eevdf")
+set(CMAKE_SYSTEM_NAME "Linux")
+set(CMAKE_SYSTEM_VERSION "6.10.2-273-tkg-eevdf")
+set(CMAKE_SYSTEM_PROCESSOR "x86_64")
+
+set(CMAKE_CROSSCOMPILING "FALSE")
+
+set(CMAKE_SYSTEM_LOADED 1)
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
new file mode 100644
index 00000000000..8d8bb038bb3
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
@@ -0,0 +1,904 @@
+#ifdef __cplusplus
+# error "A C++ compiler has been selected for C."
+#endif
+
+#if defined(__18CXX)
+# define ID_VOID_MAIN
+#endif
+#if defined(__CLASSIC_C__)
+/* cv-qualifiers did not exist in K&R C */
+# define const
+# define volatile
+#endif
+
+#if !defined(__has_include)
+/* If the compiler does not have __has_include, pretend the answer is
+   always no.  */
+#  define __has_include(x) 0
+#endif
+
+
+/* Version number components: V=Version, R=Revision, P=Patch
+   Version date components:   YYYY=Year, MM=Month,   DD=Day  */
+
+#if defined(__INTEL_COMPILER) || defined(__ICC)
+# define COMPILER_ID "Intel"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# if defined(__GNUC__)
+#  define SIMULATE_ID "GNU"
+# endif
+  /* __INTEL_COMPILER = VRP prior to 2021, and then VVVV for 2021 and later,
+     except that a few beta releases use the old format with V=2021.  */
+# if __INTEL_COMPILER < 2021 || __INTEL_COMPILER == 202110 || __INTEL_COMPILER == 202111
+#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100)
+#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10)
+#  if defined(__INTEL_COMPILER_UPDATE)
+#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER_UPDATE)
+#  else
+#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER   % 10)
+#  endif
+# else
+#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER)
+#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER_UPDATE)
+   /* The third version component from --version is an update index,
+      but no macro is provided for it.  */
+#  define COMPILER_VERSION_PATCH DEC(0)
+# endif
+# if defined(__INTEL_COMPILER_BUILD_DATE)
+   /* __INTEL_COMPILER_BUILD_DATE = YYYYMMDD */
+#  define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE)
+# endif
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+# if defined(__GNUC__)
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+# elif defined(__GNUG__)
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
+# endif
+# if defined(__GNUC_MINOR__)
+#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+# endif
+# if defined(__GNUC_PATCHLEVEL__)
+#  define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+# endif
+
+#elif (defined(__clang__) && defined(__INTEL_CLANG_COMPILER)) || defined(__INTEL_LLVM_COMPILER)
+# define COMPILER_ID "IntelLLVM"
+#if defined(_MSC_VER)
+# define SIMULATE_ID "MSVC"
+#endif
+#if defined(__GNUC__)
+# define SIMULATE_ID "GNU"
+#endif
+/* __INTEL_LLVM_COMPILER = VVVVRP prior to 2021.2.0, VVVVRRPP for 2021.2.0 and
+ * later.  Look for 6 digit vs. 8 digit version number to decide encoding.
+ * VVVV is no smaller than the current year when a version is released.
+ */
+#if __INTEL_LLVM_COMPILER < 1000000L
+# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/100)
+# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER    % 10)
+#else
+# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/10000)
+# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/100 % 100)
+# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER     % 100)
+#endif
+#if defined(_MSC_VER)
+  /* _MSC_VER = VVRR */
+# define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+# define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+#endif
+#if defined(__GNUC__)
+# define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+#elif defined(__GNUG__)
+# define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
+#endif
+#if defined(__GNUC_MINOR__)
+# define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+#endif
+#if defined(__GNUC_PATCHLEVEL__)
+# define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+#endif
+
+#elif defined(__PATHCC__)
+# define COMPILER_ID "PathScale"
+# define COMPILER_VERSION_MAJOR DEC(__PATHCC__)
+# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__)
+# if defined(__PATHCC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__)
+# endif
+
+#elif defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__)
+# define COMPILER_ID "Embarcadero"
+# define COMPILER_VERSION_MAJOR HEX(__CODEGEARC_VERSION__>>24 & 0x00FF)
+# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF)
+# define COMPILER_VERSION_PATCH DEC(__CODEGEARC_VERSION__     & 0xFFFF)
+
+#elif defined(__BORLANDC__)
+# define COMPILER_ID "Borland"
+  /* __BORLANDC__ = 0xVRR */
+# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8)
+# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF)
+
+#elif defined(__WATCOMC__) && __WATCOMC__ < 1200
+# define COMPILER_ID "Watcom"
+   /* __WATCOMC__ = VVRR */
+# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100)
+# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
+# if (__WATCOMC__ % 10) > 0
+#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
+# endif
+
+#elif defined(__WATCOMC__)
+# define COMPILER_ID "OpenWatcom"
+   /* __WATCOMC__ = VVRP + 1100 */
+# define COMPILER_VERSION_MAJOR DEC((__WATCOMC__ - 1100) / 100)
+# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
+# if (__WATCOMC__ % 10) > 0
+#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
+# endif
+
+#elif defined(__SUNPRO_C)
+# define COMPILER_ID "SunPro"
+# if __SUNPRO_C >= 0x5100
+   /* __SUNPRO_C = 0xVRRP */
+#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>12)
+#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xFF)
+#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_C    & 0xF)
+# else
+   /* __SUNPRO_CC = 0xVRP */
+#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>8)
+#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xF)
+#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_C    & 0xF)
+# endif
+
+#elif defined(__HP_cc)
+# define COMPILER_ID "HP"
+  /* __HP_cc = VVRRPP */
+# define COMPILER_VERSION_MAJOR DEC(__HP_cc/10000)
+# define COMPILER_VERSION_MINOR DEC(__HP_cc/100 % 100)
+# define COMPILER_VERSION_PATCH DEC(__HP_cc     % 100)
+
+#elif defined(__DECC)
+# define COMPILER_ID "Compaq"
+  /* __DECC_VER = VVRRTPPPP */
+# define COMPILER_VERSION_MAJOR DEC(__DECC_VER/10000000)
+# define COMPILER_VERSION_MINOR DEC(__DECC_VER/100000  % 100)
+# define COMPILER_VERSION_PATCH DEC(__DECC_VER         % 10000)
+
+#elif defined(__IBMC__) && defined(__COMPILER_VER__)
+# define COMPILER_ID "zOS"
+  /* __IBMC__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
+
+#elif defined(__open_xl__) && defined(__clang__)
+# define COMPILER_ID "IBMClang"
+# define COMPILER_VERSION_MAJOR DEC(__open_xl_version__)
+# define COMPILER_VERSION_MINOR DEC(__open_xl_release__)
+# define COMPILER_VERSION_PATCH DEC(__open_xl_modification__)
+# define COMPILER_VERSION_TWEAK DEC(__open_xl_ptf_fix_level__)
+
+
+#elif defined(__ibmxl__) && defined(__clang__)
+# define COMPILER_ID "XLClang"
+# define COMPILER_VERSION_MAJOR DEC(__ibmxl_version__)
+# define COMPILER_VERSION_MINOR DEC(__ibmxl_release__)
+# define COMPILER_VERSION_PATCH DEC(__ibmxl_modification__)
+# define COMPILER_VERSION_TWEAK DEC(__ibmxl_ptf_fix_level__)
+
+
+#elif defined(__IBMC__) && !defined(__COMPILER_VER__) && __IBMC__ >= 800
+# define COMPILER_ID "XL"
+  /* __IBMC__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
+
+#elif defined(__IBMC__) && !defined(__COMPILER_VER__) && __IBMC__ < 800
+# define COMPILER_ID "VisualAge"
+  /* __IBMC__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
+
+#elif defined(__NVCOMPILER)
+# define COMPILER_ID "NVHPC"
+# define COMPILER_VERSION_MAJOR DEC(__NVCOMPILER_MAJOR__)
+# define COMPILER_VERSION_MINOR DEC(__NVCOMPILER_MINOR__)
+# if defined(__NVCOMPILER_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__NVCOMPILER_PATCHLEVEL__)
+# endif
+
+#elif defined(__PGI)
+# define COMPILER_ID "PGI"
+# define COMPILER_VERSION_MAJOR DEC(__PGIC__)
+# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__)
+# if defined(__PGIC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__)
+# endif
+
+#elif defined(__clang__) && defined(__cray__)
+# define COMPILER_ID "CrayClang"
+# define COMPILER_VERSION_MAJOR DEC(__cray_major__)
+# define COMPILER_VERSION_MINOR DEC(__cray_minor__)
+# define COMPILER_VERSION_PATCH DEC(__cray_patchlevel__)
+# define COMPILER_VERSION_INTERNAL_STR __clang_version__
+
+
+#elif defined(_CRAYC)
+# define COMPILER_ID "Cray"
+# define COMPILER_VERSION_MAJOR DEC(_RELEASE_MAJOR)
+# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR)
+
+#elif defined(__TI_COMPILER_VERSION__)
+# define COMPILER_ID "TI"
+  /* __TI_COMPILER_VERSION__ = VVVRRRPPP */
+# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000)
+# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000   % 1000)
+# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__        % 1000)
+
+#elif defined(__CLANG_FUJITSU)
+# define COMPILER_ID "FujitsuClang"
+# define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
+# define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
+# define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
+# define COMPILER_VERSION_INTERNAL_STR __clang_version__
+
+
+#elif defined(__FUJITSU)
+# define COMPILER_ID "Fujitsu"
+# if defined(__FCC_version__)
+#   define COMPILER_VERSION __FCC_version__
+# elif defined(__FCC_major__)
+#   define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
+#   define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
+#   define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
+# endif
+# if defined(__fcc_version)
+#   define COMPILER_VERSION_INTERNAL DEC(__fcc_version)
+# elif defined(__FCC_VERSION)
+#   define COMPILER_VERSION_INTERNAL DEC(__FCC_VERSION)
+# endif
+
+
+#elif defined(__ghs__)
+# define COMPILER_ID "GHS"
+/* __GHS_VERSION_NUMBER = VVVVRP */
+# ifdef __GHS_VERSION_NUMBER
+# define COMPILER_VERSION_MAJOR DEC(__GHS_VERSION_NUMBER / 100)
+# define COMPILER_VERSION_MINOR DEC(__GHS_VERSION_NUMBER / 10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__GHS_VERSION_NUMBER      % 10)
+# endif
+
+#elif defined(__TASKING__)
+# define COMPILER_ID "Tasking"
+  # define COMPILER_VERSION_MAJOR DEC(__VERSION__/1000)
+  # define COMPILER_VERSION_MINOR DEC(__VERSION__ % 100)
+# define COMPILER_VERSION_INTERNAL DEC(__VERSION__)
+
+#elif defined(__ORANGEC__)
+# define COMPILER_ID "OrangeC"
+# define COMPILER_VERSION_MAJOR DEC(__ORANGEC_MAJOR__)
+# define COMPILER_VERSION_MINOR DEC(__ORANGEC_MINOR__)
+# define COMPILER_VERSION_PATCH DEC(__ORANGEC_PATCHLEVEL__)
+
+#elif defined(__TINYC__)
+# define COMPILER_ID "TinyCC"
+
+#elif defined(__BCC__)
+# define COMPILER_ID "Bruce"
+
+#elif defined(__SCO_VERSION__)
+# define COMPILER_ID "SCO"
+
+#elif defined(__ARMCC_VERSION) && !defined(__clang__)
+# define COMPILER_ID "ARMCC"
+#if __ARMCC_VERSION >= 1000000
+  /* __ARMCC_VERSION = VRRPPPP */
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/1000000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 100)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION     % 10000)
+#else
+  /* __ARMCC_VERSION = VRPPPP */
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/100000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 10)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION    % 10000)
+#endif
+
+
+#elif defined(__clang__) && defined(__apple_build_version__)
+# define COMPILER_ID "AppleClang"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
+# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
+# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+# define COMPILER_VERSION_TWEAK DEC(__apple_build_version__)
+
+#elif defined(__clang__) && defined(__ARMCOMPILER_VERSION)
+# define COMPILER_ID "ARMClang"
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCOMPILER_VERSION/1000000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCOMPILER_VERSION/10000 % 100)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCOMPILER_VERSION/100   % 100)
+# define COMPILER_VERSION_INTERNAL DEC(__ARMCOMPILER_VERSION)
+
+#elif defined(__clang__) && defined(__ti__)
+# define COMPILER_ID "TIClang"
+  # define COMPILER_VERSION_MAJOR DEC(__ti_major__)
+  # define COMPILER_VERSION_MINOR DEC(__ti_minor__)
+  # define COMPILER_VERSION_PATCH DEC(__ti_patchlevel__)
+# define COMPILER_VERSION_INTERNAL DEC(__ti_version__)
+
+#elif defined(__clang__)
+# define COMPILER_ID "Clang"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
+# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
+# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+
+#elif defined(__LCC__) && (defined(__GNUC__) || defined(__GNUG__) || defined(__MCST__))
+# define COMPILER_ID "LCC"
+# define COMPILER_VERSION_MAJOR DEC(__LCC__ / 100)
+# define COMPILER_VERSION_MINOR DEC(__LCC__ % 100)
+# if defined(__LCC_MINOR__)
+#  define COMPILER_VERSION_PATCH DEC(__LCC_MINOR__)
+# endif
+# if defined(__GNUC__) && defined(__GNUC_MINOR__)
+#  define SIMULATE_ID "GNU"
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+#  if defined(__GNUC_PATCHLEVEL__)
+#   define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+#  endif
+# endif
+
+#elif defined(__GNUC__)
+# define COMPILER_ID "GNU"
+# define COMPILER_VERSION_MAJOR DEC(__GNUC__)
+# if defined(__GNUC_MINOR__)
+#  define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__)
+# endif
+# if defined(__GNUC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+# endif
+
+#elif defined(_MSC_VER)
+# define COMPILER_ID "MSVC"
+  /* _MSC_VER = VVRR */
+# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100)
+# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100)
+# if defined(_MSC_FULL_VER)
+#  if _MSC_VER >= 1400
+    /* _MSC_FULL_VER = VVRRPPPPP */
+#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000)
+#  else
+    /* _MSC_FULL_VER = VVRRPPPP */
+#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000)
+#  endif
+# endif
+# if defined(_MSC_BUILD)
+#  define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD)
+# endif
+
+#elif defined(_ADI_COMPILER)
+# define COMPILER_ID "ADSP"
+#if defined(__VERSIONNUM__)
+  /* __VERSIONNUM__ = 0xVVRRPPTT */
+#  define COMPILER_VERSION_MAJOR DEC(__VERSIONNUM__ >> 24 & 0xFF)
+#  define COMPILER_VERSION_MINOR DEC(__VERSIONNUM__ >> 16 & 0xFF)
+#  define COMPILER_VERSION_PATCH DEC(__VERSIONNUM__ >> 8 & 0xFF)
+#  define COMPILER_VERSION_TWEAK DEC(__VERSIONNUM__ & 0xFF)
+#endif
+
+#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
+# define COMPILER_ID "IAR"
+# if defined(__VER__) && defined(__ICCARM__)
+#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 1000000)
+#  define COMPILER_VERSION_MINOR DEC(((__VER__) / 1000) % 1000)
+#  define COMPILER_VERSION_PATCH DEC((__VER__) % 1000)
+#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
+# elif defined(__VER__) && (defined(__ICCAVR__) || defined(__ICCRX__) || defined(__ICCRH850__) || defined(__ICCRL78__) || defined(__ICC430__) || defined(__ICCRISCV__) || defined(__ICCV850__) || defined(__ICC8051__) || defined(__ICCSTM8__))
+#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 100)
+#  define COMPILER_VERSION_MINOR DEC((__VER__) - (((__VER__) / 100)*100))
+#  define COMPILER_VERSION_PATCH DEC(__SUBVERSION__)
+#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
+# endif
+
+#elif defined(__SDCC_VERSION_MAJOR) || defined(SDCC)
+# define COMPILER_ID "SDCC"
+# if defined(__SDCC_VERSION_MAJOR)
+#  define COMPILER_VERSION_MAJOR DEC(__SDCC_VERSION_MAJOR)
+#  define COMPILER_VERSION_MINOR DEC(__SDCC_VERSION_MINOR)
+#  define COMPILER_VERSION_PATCH DEC(__SDCC_VERSION_PATCH)
+# else
+  /* SDCC = VRP */
+#  define COMPILER_VERSION_MAJOR DEC(SDCC/100)
+#  define COMPILER_VERSION_MINOR DEC(SDCC/10 % 10)
+#  define COMPILER_VERSION_PATCH DEC(SDCC    % 10)
+# endif
+
+
+/* These compilers are either not known or too old to define an
+  identification macro.  Try to identify the platform and guess that
+  it is the native compiler.  */
+#elif defined(__hpux) || defined(__hpua)
+# define COMPILER_ID "HP"
+
+#else /* unknown compiler */
+# define COMPILER_ID ""
+#endif
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
+#ifdef SIMULATE_ID
+char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
+#endif
+
+#ifdef __QNXNTO__
+char const* qnxnto = "INFO" ":" "qnxnto[]";
+#endif
+
+#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
+char const *info_cray = "INFO" ":" "compiler_wrapper[CrayPrgEnv]";
+#endif
+
+#define STRINGIFY_HELPER(X) #X
+#define STRINGIFY(X) STRINGIFY_HELPER(X)
+
+/* Identify known platforms by name.  */
+#if defined(__linux) || defined(__linux__) || defined(linux)
+# define PLATFORM_ID "Linux"
+
+#elif defined(__MSYS__)
+# define PLATFORM_ID "MSYS"
+
+#elif defined(__CYGWIN__)
+# define PLATFORM_ID "Cygwin"
+
+#elif defined(__MINGW32__)
+# define PLATFORM_ID "MinGW"
+
+#elif defined(__APPLE__)
+# define PLATFORM_ID "Darwin"
+
+#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
+# define PLATFORM_ID "Windows"
+
+#elif defined(__FreeBSD__) || defined(__FreeBSD)
+# define PLATFORM_ID "FreeBSD"
+
+#elif defined(__NetBSD__) || defined(__NetBSD)
+# define PLATFORM_ID "NetBSD"
+
+#elif defined(__OpenBSD__) || defined(__OPENBSD)
+# define PLATFORM_ID "OpenBSD"
+
+#elif defined(__sun) || defined(sun)
+# define PLATFORM_ID "SunOS"
+
+#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
+# define PLATFORM_ID "AIX"
+
+#elif defined(__hpux) || defined(__hpux__)
+# define PLATFORM_ID "HP-UX"
+
+#elif defined(__HAIKU__)
+# define PLATFORM_ID "Haiku"
+
+#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
+# define PLATFORM_ID "BeOS"
+
+#elif defined(__QNX__) || defined(__QNXNTO__)
+# define PLATFORM_ID "QNX"
+
+#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
+# define PLATFORM_ID "Tru64"
+
+#elif defined(__riscos) || defined(__riscos__)
+# define PLATFORM_ID "RISCos"
+
+#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
+# define PLATFORM_ID "SINIX"
+
+#elif defined(__UNIX_SV__)
+# define PLATFORM_ID "UNIX_SV"
+
+#elif defined(__bsdos__)
+# define PLATFORM_ID "BSDOS"
+
+#elif defined(_MPRAS) || defined(MPRAS)
+# define PLATFORM_ID "MP-RAS"
+
+#elif defined(__osf) || defined(__osf__)
+# define PLATFORM_ID "OSF1"
+
+#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
+# define PLATFORM_ID "SCO_SV"
+
+#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
+# define PLATFORM_ID "ULTRIX"
+
+#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
+# define PLATFORM_ID "Xenix"
+
+#elif defined(__WATCOMC__)
+# if defined(__LINUX__)
+#  define PLATFORM_ID "Linux"
+
+# elif defined(__DOS__)
+#  define PLATFORM_ID "DOS"
+
+# elif defined(__OS2__)
+#  define PLATFORM_ID "OS2"
+
+# elif defined(__WINDOWS__)
+#  define PLATFORM_ID "Windows3x"
+
+# elif defined(__VXWORKS__)
+#  define PLATFORM_ID "VxWorks"
+
+# else /* unknown platform */
+#  define PLATFORM_ID
+# endif
+
+#elif defined(__INTEGRITY)
+# if defined(INT_178B)
+#  define PLATFORM_ID "Integrity178"
+
+# else /* regular Integrity */
+#  define PLATFORM_ID "Integrity"
+# endif
+
+# elif defined(_ADI_COMPILER)
+#  define PLATFORM_ID "ADSP"
+
+#else /* unknown platform */
+# define PLATFORM_ID
+
+#endif
+
+/* For windows compilers MSVC and Intel we can determine
+   the architecture of the compiler being used.  This is because
+   the compilers do not have flags that can change the architecture,
+   but rather depend on which compiler is being used
+*/
+#if defined(_WIN32) && defined(_MSC_VER)
+# if defined(_M_IA64)
+#  define ARCHITECTURE_ID "IA64"
+
+# elif defined(_M_ARM64EC)
+#  define ARCHITECTURE_ID "ARM64EC"
+
+# elif defined(_M_X64) || defined(_M_AMD64)
+#  define ARCHITECTURE_ID "x64"
+
+# elif defined(_M_IX86)
+#  define ARCHITECTURE_ID "X86"
+
+# elif defined(_M_ARM64)
+#  define ARCHITECTURE_ID "ARM64"
+
+# elif defined(_M_ARM)
+#  if _M_ARM == 4
+#   define ARCHITECTURE_ID "ARMV4I"
+#  elif _M_ARM == 5
+#   define ARCHITECTURE_ID "ARMV5I"
+#  else
+#   define ARCHITECTURE_ID "ARMV" STRINGIFY(_M_ARM)
+#  endif
+
+# elif defined(_M_MIPS)
+#  define ARCHITECTURE_ID "MIPS"
+
+# elif defined(_M_SH)
+#  define ARCHITECTURE_ID "SHx"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__WATCOMC__)
+# if defined(_M_I86)
+#  define ARCHITECTURE_ID "I86"
+
+# elif defined(_M_IX86)
+#  define ARCHITECTURE_ID "X86"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
+# if defined(__ICCARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__ICCRX__)
+#  define ARCHITECTURE_ID "RX"
+
+# elif defined(__ICCRH850__)
+#  define ARCHITECTURE_ID "RH850"
+
+# elif defined(__ICCRL78__)
+#  define ARCHITECTURE_ID "RL78"
+
+# elif defined(__ICCRISCV__)
+#  define ARCHITECTURE_ID "RISCV"
+
+# elif defined(__ICCAVR__)
+#  define ARCHITECTURE_ID "AVR"
+
+# elif defined(__ICC430__)
+#  define ARCHITECTURE_ID "MSP430"
+
+# elif defined(__ICCV850__)
+#  define ARCHITECTURE_ID "V850"
+
+# elif defined(__ICC8051__)
+#  define ARCHITECTURE_ID "8051"
+
+# elif defined(__ICCSTM8__)
+#  define ARCHITECTURE_ID "STM8"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__ghs__)
+# if defined(__PPC64__)
+#  define ARCHITECTURE_ID "PPC64"
+
+# elif defined(__ppc__)
+#  define ARCHITECTURE_ID "PPC"
+
+# elif defined(__ARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__x86_64__)
+#  define ARCHITECTURE_ID "x64"
+
+# elif defined(__i386__)
+#  define ARCHITECTURE_ID "X86"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__clang__) && defined(__ti__)
+# if defined(__ARM_ARCH)
+#  define ARCHITECTURE_ID "Arm"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__TI_COMPILER_VERSION__)
+# if defined(__TI_ARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__MSP430__)
+#  define ARCHITECTURE_ID "MSP430"
+
+# elif defined(__TMS320C28XX__)
+#  define ARCHITECTURE_ID "TMS320C28x"
+
+# elif defined(__TMS320C6X__) || defined(_TMS320C6X)
+#  define ARCHITECTURE_ID "TMS320C6x"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+# elif defined(__ADSPSHARC__)
+#  define ARCHITECTURE_ID "SHARC"
+
+# elif defined(__ADSPBLACKFIN__)
+#  define ARCHITECTURE_ID "Blackfin"
+
+#elif defined(__TASKING__)
+
+# if defined(__CTC__) || defined(__CPTC__)
+#  define ARCHITECTURE_ID "TriCore"
+
+# elif defined(__CMCS__)
+#  define ARCHITECTURE_ID "MCS"
+
+# elif defined(__CARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__CARC__)
+#  define ARCHITECTURE_ID "ARC"
+
+# elif defined(__C51__)
+#  define ARCHITECTURE_ID "8051"
+
+# elif defined(__CPCP__)
+#  define ARCHITECTURE_ID "PCP"
+
+# else
+#  define ARCHITECTURE_ID ""
+# endif
+
+#else
+#  define ARCHITECTURE_ID
+#endif
+
+/* Convert integer to decimal digit literals.  */
+#define DEC(n)                   \
+  ('0' + (((n) / 10000000)%10)), \
+  ('0' + (((n) / 1000000)%10)),  \
+  ('0' + (((n) / 100000)%10)),   \
+  ('0' + (((n) / 10000)%10)),    \
+  ('0' + (((n) / 1000)%10)),     \
+  ('0' + (((n) / 100)%10)),      \
+  ('0' + (((n) / 10)%10)),       \
+  ('0' +  ((n) % 10))
+
+/* Convert integer to hex digit literals.  */
+#define HEX(n)             \
+  ('0' + ((n)>>28 & 0xF)), \
+  ('0' + ((n)>>24 & 0xF)), \
+  ('0' + ((n)>>20 & 0xF)), \
+  ('0' + ((n)>>16 & 0xF)), \
+  ('0' + ((n)>>12 & 0xF)), \
+  ('0' + ((n)>>8  & 0xF)), \
+  ('0' + ((n)>>4  & 0xF)), \
+  ('0' + ((n)     & 0xF))
+
+/* Construct a string literal encoding the version number. */
+#ifdef COMPILER_VERSION
+char const* info_version = "INFO" ":" "compiler_version[" COMPILER_VERSION "]";
+
+/* Construct a string literal encoding the version number components. */
+#elif defined(COMPILER_VERSION_MAJOR)
+char const info_version[] = {
+  'I', 'N', 'F', 'O', ':',
+  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[',
+  COMPILER_VERSION_MAJOR,
+# ifdef COMPILER_VERSION_MINOR
+  '.', COMPILER_VERSION_MINOR,
+#  ifdef COMPILER_VERSION_PATCH
+   '.', COMPILER_VERSION_PATCH,
+#   ifdef COMPILER_VERSION_TWEAK
+    '.', COMPILER_VERSION_TWEAK,
+#   endif
+#  endif
+# endif
+  ']','\0'};
+#endif
+
+/* Construct a string literal encoding the internal version number. */
+#ifdef COMPILER_VERSION_INTERNAL
+char const info_version_internal[] = {
+  'I', 'N', 'F', 'O', ':',
+  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','_',
+  'i','n','t','e','r','n','a','l','[',
+  COMPILER_VERSION_INTERNAL,']','\0'};
+#elif defined(COMPILER_VERSION_INTERNAL_STR)
+char const* info_version_internal = "INFO" ":" "compiler_version_internal[" COMPILER_VERSION_INTERNAL_STR "]";
+#endif
+
+/* Construct a string literal encoding the version number components. */
+#ifdef SIMULATE_VERSION_MAJOR
+char const info_simulate_version[] = {
+  'I', 'N', 'F', 'O', ':',
+  's','i','m','u','l','a','t','e','_','v','e','r','s','i','o','n','[',
+  SIMULATE_VERSION_MAJOR,
+# ifdef SIMULATE_VERSION_MINOR
+  '.', SIMULATE_VERSION_MINOR,
+#  ifdef SIMULATE_VERSION_PATCH
+   '.', SIMULATE_VERSION_PATCH,
+#   ifdef SIMULATE_VERSION_TWEAK
+    '.', SIMULATE_VERSION_TWEAK,
+#   endif
+#  endif
+# endif
+  ']','\0'};
+#endif
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]";
+char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]";
+
+
+
+#define C_STD_99 199901L
+#define C_STD_11 201112L
+#define C_STD_17 201710L
+#define C_STD_23 202311L
+
+#ifdef __STDC_VERSION__
+#  define C_STD __STDC_VERSION__
+#endif
+
+#if !defined(__STDC__) && !defined(__clang__)
+# if defined(_MSC_VER) || defined(__ibmxl__) || defined(__IBMC__)
+#  define C_VERSION "90"
+# else
+#  define C_VERSION
+# endif
+#elif C_STD > C_STD_17
+# define C_VERSION "23"
+#elif C_STD > C_STD_11
+# define C_VERSION "17"
+#elif C_STD > C_STD_99
+# define C_VERSION "11"
+#elif C_STD >= C_STD_99
+# define C_VERSION "99"
+#else
+# define C_VERSION "90"
+#endif
+const char* info_language_standard_default =
+  "INFO" ":" "standard_default[" C_VERSION "]";
+
+const char* info_language_extensions_default = "INFO" ":" "extensions_default["
+#if (defined(__clang__) || defined(__GNUC__) || defined(__xlC__) ||           \
+     defined(__TI_COMPILER_VERSION__)) &&                                     \
+  !defined(__STRICT_ANSI__)
+  "ON"
+#else
+  "OFF"
+#endif
+"]";
+
+/*--------------------------------------------------------------------------*/
+
+#ifdef ID_VOID_MAIN
+void main() {}
+#else
+# if defined(__CLASSIC_C__)
+int main(argc, argv) int argc; char *argv[];
+# else
+int main(int argc, char* argv[])
+# endif
+{
+  int require = 0;
+  require += info_compiler[argc];
+  require += info_platform[argc];
+  require += info_arch[argc];
+#ifdef COMPILER_VERSION_MAJOR
+  require += info_version[argc];
+#endif
+#ifdef COMPILER_VERSION_INTERNAL
+  require += info_version_internal[argc];
+#endif
+#ifdef SIMULATE_ID
+  require += info_simulate[argc];
+#endif
+#ifdef SIMULATE_VERSION_MAJOR
+  require += info_simulate_version[argc];
+#endif
+#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
+  require += info_cray[argc];
+#endif
+  require += info_language_standard_default[argc];
+  require += info_language_extensions_default[argc];
+  (void)argv;
+  return require;
+}
+#endif
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
new file mode 100755
index 0000000000000000000000000000000000000000..37746a787a5774e617e8abfcaacf5381d6be0900
GIT binary patch
literal 15560
zcmeHOYit}>6~4R9!zpoh<JPX56f!g@awR-oJC513q+LJO8B2bY)Dc1^9gV$Xd&PR!
z?2f@HY8w$KF=<eF2#N$K5<-GXAXS2jAE-D=RT>FUf`n962)RHZpg@BP$c4zuIdjjq
z8Bf<O>YoZ}uH`xReD{3k-Z^(3cW2H#njIO6$6^YlLEWoZGm;v~NW%*Ur9vX3(yEEJ
zcc?vT8|hnoOt)vWpjKU8jBk{Uf;W(4UK>~H$U8JledvM_vSi+7Wq}7o1yad=FmEe2
zh#r=|kPaZxUhB_bG8Mz$*5n6;2N~q?P?Dy$Pu{yxwo6=6BEe&od4})|;X$60{vZ)g
zjtT##C7xlKp*AiVf2&lOw<Nr<929#<?t{w%uXwq))8GBV`?=w}QDKSshD3iKBA!gG
zCcecM(|lC=+iV`LNjxD%Rh@<WRBumbA=gpJ7Z;a0meRc)y**~7WOn;K^SDy<&&Sk}
zv12NJQmrrseoVzS=yB1>#4l`nEB$lWnSamYzklRU7rj4r9@_Wm%fET=Q^zVlSYsRB
z5BAA6To~hj6mG*mu>VCer@4;d0AWTQ+};E)Zi3%J_?>n9DBGsUPTLjFDSP(3lP?l7
zz2w+4`Jz+EKjbQI<~aANBO}B819rFBZ62)E5A-N|cw*Gfxn*}YU-8`X#OOewRCFht
zse((sX6H*q@osC=x`s;8jQD^0z>ks6<Hd2axI4dtXXpKb{qT!lrNb{yS3X^EKI1$}
z?$UUhoUg!F#9?Dbw*!Zs4B>{M?b<?kS#TqSe@^iB5dLMsQz88Og0I}C{KDrH9}6fi
z1n@XOl9vLwTq^w57Xx_kxLgh3{&hFtE2>5jh$0Y0Ac{Z~fhYn|1fmGMa}jtg@t%KM
zr>-_yXSSa2RLc77iWje5vQ9nMc)=eOw|D(@c=_^!*7EPHQ-8R2|3tQHrR$<~_V7z&
zP;L1XvHme*CiZ^Dw<r8%_H%aYODqnpc`fAnL2<pKx|-N~k_|72B>Sg*`-4xhxNF^7
zzGj{O+kMvgwFWEpymfiqyOkVth=a!J>P%wq;0->H@8scmYF3K}j#;M;-^5jG`4z9p
zI&*kGDb<!W`YnBBx>~J1zjcs+*zpTD#(QDrMm@1NquAe{XUX;$`B;AVs<phh`m^kH
z9<p_&<+tSNO!lhvq!qiAct$0jU5RC{6aLFh@Mr7c+QHeD^EWG%cxFqo=H<zH*5v(k
zJ^W1e`f-|~+WggKjE5SPC<0Lgq6kD0h$0Y0Ac{Z~fhYn|1fmE;5r`tNF#`PF>&?pW
z*wFah)1~=^e8DYG(p$*m8?86A+n;dDm3*l<net0lkEtuEZdAICE1$7YaJ-pPd46()
z->wSil&9w=rB3e$i#ey9qZfTM&SJrv?D~MTxJ#Z}<X$SZw(&84RIxn`_q5UQc#kGt
ztyX(Tj$W%)M@aI!RxYuJj;h#FGPY;u_QogZ#TVoJuDOlu_p`y^cK?kXW6Xb@@b56*
zcXRTw_(0RP_&H)S5S1tbQ3Rq0L=lK05Je!0Koo%}0#O8_2>gFX0C|kaTSRW)ow8dy
zv3ru&*d+Rj<UignI`Sj;h>o93yG2KyB=UUG{?GMliA`1{$q>1N3zA&O`HEatrTr$Y
zs?#FhC6a#!a%s_`w%snZv^Yk;Y1vUq`t%F<|EcQn5a^q(i{2=FdQ<F=7jdGWo4)QR
z?-J>C*lV}%*cSQYn+*W@sD_~}kZ+3oQsk2&fAq+}z}-eWJrB6cpr85OW|z^O>h4LU
zQ<SP(zv)m{YO~G>=lE?=f3MavsfY9L_L#awh4<^-zJo+9uN?lk?-(5oS0pbL_z+c^
zp#<bK)s29T>KA;xRjCXREgvP3RIMr<!XG2NIo_mjerRi@9vAztpRW^cz$hTUOZ8px
zR)u*&(~lTelu2M{1Ub0R`FN`e=Mn!(@Ni!6YlJ7&Z7P$YN}zm+>dk6r?R${@(zZr&
z7wvB{qXC>p+h`)$PdE<EgtMR9<vQU%Qz7bYg!6ud?e{TG{=<3A{e&C3%MII)5{_$B
zu;G)0H^=F!AlECjJxn;qEn{e;TN*y^<E_fbXaM`A21cEaxdQ|8By2cmPAhxxBV&D|
z!vmCcPA7t$wd|pzeWO|18a%4(BO~MeeIxex(9i?f345Zie<Vx!=;7q|407DxDzDwm
zIi909OFmCtSkX!DZ^(GJbCr@kM-R_98-944taACHy;yN`Dqox_*?97%wSrTeU36w$
z`;AZ4l<gLUgXe$L*;J(>9ZT*$rQh4xu|eAoISfC*dy`!JjUNEiLc(ePHtnycJ<GF2
zt?;8lrOe8SdC!?5>6NvdLoHvVPXiW|SuA<3Ia^#b7s{mtx9pt=KvRo(`o1Hd6R59$
zxWjX1m2W=hROXbKJ5i)AwDiil1>^9|M6s!@>=qm*DAOOa=}}0P=}(whF8R}Ex^wnS
z*_n6kxg0T|X@>2T%MJ~X8K{#xXFfko9hb-#ZOnxNRkSmj3T4vN%)3QTj^4K~_&!aC
ze(h;+o7`U^ai2yHY#S{5Na1^HT)?#OAv1zQ)XpmbdPxTPOTveIABZAxodY}^;(tT<
zkOmAzhWQ^R{9kmh#`v-RfW-c96MlI74&l7^03YiU$R~uy`^d2aAM1=fVLW8;vEG3^
zO>Myvj{nE0k=G*NWBmb%bsNSHJIF_f&ubg#Sl>Y6-W?u4#&nh{98>VIzN$$XF!~Sg
z|JR7iCTOo+ujRUpbtIYiB|LxMBs9o3ga`SpP{5>FyeakV5PwDPQ;=Baf)MWid&0;5
zD?=<rUKABVV5sV8s__uP-|V|M5W@ZcG{nDRXiLZm5Je*XfO&khitvv?#;|_JcXMHT
z=#alAP9ng^`o4{F7rDSrYd3V@FH-~0y_~kSbsfHgJSX$V#~&B)FpqyBj7`AD_f0FE
zY^_wg7PT$-kgrlpkdJlZ72)GNg#+*)c|8>5tBhEtv`mW%0Uq>qsxXG}V?C4>e%M~Z
z0lI1+fH5(z;o$T2HCVt8N*sGZy9IIhV`<z?jXX~n58|?eFpNFOZ$F^5ub?Ao45_ph
RtIz)lzl5W*Geiif>c5;{)EEE&

literal 0
HcmV?d00001

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
new file mode 100644
index 00000000000..da6c824af3a
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
@@ -0,0 +1,919 @@
+/* This source file must have a .cpp extension so that all C++ compilers
+   recognize the extension without flags.  Borland does not know .cxx for
+   example.  */
+#ifndef __cplusplus
+# error "A C compiler has been selected for C++."
+#endif
+
+#if !defined(__has_include)
+/* If the compiler does not have __has_include, pretend the answer is
+   always no.  */
+#  define __has_include(x) 0
+#endif
+
+
+/* Version number components: V=Version, R=Revision, P=Patch
+   Version date components:   YYYY=Year, MM=Month,   DD=Day  */
+
+#if defined(__INTEL_COMPILER) || defined(__ICC)
+# define COMPILER_ID "Intel"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# if defined(__GNUC__)
+#  define SIMULATE_ID "GNU"
+# endif
+  /* __INTEL_COMPILER = VRP prior to 2021, and then VVVV for 2021 and later,
+     except that a few beta releases use the old format with V=2021.  */
+# if __INTEL_COMPILER < 2021 || __INTEL_COMPILER == 202110 || __INTEL_COMPILER == 202111
+#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100)
+#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10)
+#  if defined(__INTEL_COMPILER_UPDATE)
+#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER_UPDATE)
+#  else
+#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER   % 10)
+#  endif
+# else
+#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER)
+#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER_UPDATE)
+   /* The third version component from --version is an update index,
+      but no macro is provided for it.  */
+#  define COMPILER_VERSION_PATCH DEC(0)
+# endif
+# if defined(__INTEL_COMPILER_BUILD_DATE)
+   /* __INTEL_COMPILER_BUILD_DATE = YYYYMMDD */
+#  define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE)
+# endif
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+# if defined(__GNUC__)
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+# elif defined(__GNUG__)
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
+# endif
+# if defined(__GNUC_MINOR__)
+#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+# endif
+# if defined(__GNUC_PATCHLEVEL__)
+#  define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+# endif
+
+#elif (defined(__clang__) && defined(__INTEL_CLANG_COMPILER)) || defined(__INTEL_LLVM_COMPILER)
+# define COMPILER_ID "IntelLLVM"
+#if defined(_MSC_VER)
+# define SIMULATE_ID "MSVC"
+#endif
+#if defined(__GNUC__)
+# define SIMULATE_ID "GNU"
+#endif
+/* __INTEL_LLVM_COMPILER = VVVVRP prior to 2021.2.0, VVVVRRPP for 2021.2.0 and
+ * later.  Look for 6 digit vs. 8 digit version number to decide encoding.
+ * VVVV is no smaller than the current year when a version is released.
+ */
+#if __INTEL_LLVM_COMPILER < 1000000L
+# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/100)
+# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER    % 10)
+#else
+# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/10000)
+# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/100 % 100)
+# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER     % 100)
+#endif
+#if defined(_MSC_VER)
+  /* _MSC_VER = VVRR */
+# define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+# define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+#endif
+#if defined(__GNUC__)
+# define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+#elif defined(__GNUG__)
+# define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
+#endif
+#if defined(__GNUC_MINOR__)
+# define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+#endif
+#if defined(__GNUC_PATCHLEVEL__)
+# define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+#endif
+
+#elif defined(__PATHCC__)
+# define COMPILER_ID "PathScale"
+# define COMPILER_VERSION_MAJOR DEC(__PATHCC__)
+# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__)
+# if defined(__PATHCC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__)
+# endif
+
+#elif defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__)
+# define COMPILER_ID "Embarcadero"
+# define COMPILER_VERSION_MAJOR HEX(__CODEGEARC_VERSION__>>24 & 0x00FF)
+# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF)
+# define COMPILER_VERSION_PATCH DEC(__CODEGEARC_VERSION__     & 0xFFFF)
+
+#elif defined(__BORLANDC__)
+# define COMPILER_ID "Borland"
+  /* __BORLANDC__ = 0xVRR */
+# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8)
+# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF)
+
+#elif defined(__WATCOMC__) && __WATCOMC__ < 1200
+# define COMPILER_ID "Watcom"
+   /* __WATCOMC__ = VVRR */
+# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100)
+# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
+# if (__WATCOMC__ % 10) > 0
+#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
+# endif
+
+#elif defined(__WATCOMC__)
+# define COMPILER_ID "OpenWatcom"
+   /* __WATCOMC__ = VVRP + 1100 */
+# define COMPILER_VERSION_MAJOR DEC((__WATCOMC__ - 1100) / 100)
+# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
+# if (__WATCOMC__ % 10) > 0
+#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
+# endif
+
+#elif defined(__SUNPRO_CC)
+# define COMPILER_ID "SunPro"
+# if __SUNPRO_CC >= 0x5100
+   /* __SUNPRO_CC = 0xVRRP */
+#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>12)
+#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xFF)
+#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC    & 0xF)
+# else
+   /* __SUNPRO_CC = 0xVRP */
+#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>8)
+#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xF)
+#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC    & 0xF)
+# endif
+
+#elif defined(__HP_aCC)
+# define COMPILER_ID "HP"
+  /* __HP_aCC = VVRRPP */
+# define COMPILER_VERSION_MAJOR DEC(__HP_aCC/10000)
+# define COMPILER_VERSION_MINOR DEC(__HP_aCC/100 % 100)
+# define COMPILER_VERSION_PATCH DEC(__HP_aCC     % 100)
+
+#elif defined(__DECCXX)
+# define COMPILER_ID "Compaq"
+  /* __DECCXX_VER = VVRRTPPPP */
+# define COMPILER_VERSION_MAJOR DEC(__DECCXX_VER/10000000)
+# define COMPILER_VERSION_MINOR DEC(__DECCXX_VER/100000  % 100)
+# define COMPILER_VERSION_PATCH DEC(__DECCXX_VER         % 10000)
+
+#elif defined(__IBMCPP__) && defined(__COMPILER_VER__)
+# define COMPILER_ID "zOS"
+  /* __IBMCPP__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
+
+#elif defined(__open_xl__) && defined(__clang__)
+# define COMPILER_ID "IBMClang"
+# define COMPILER_VERSION_MAJOR DEC(__open_xl_version__)
+# define COMPILER_VERSION_MINOR DEC(__open_xl_release__)
+# define COMPILER_VERSION_PATCH DEC(__open_xl_modification__)
+# define COMPILER_VERSION_TWEAK DEC(__open_xl_ptf_fix_level__)
+
+
+#elif defined(__ibmxl__) && defined(__clang__)
+# define COMPILER_ID "XLClang"
+# define COMPILER_VERSION_MAJOR DEC(__ibmxl_version__)
+# define COMPILER_VERSION_MINOR DEC(__ibmxl_release__)
+# define COMPILER_VERSION_PATCH DEC(__ibmxl_modification__)
+# define COMPILER_VERSION_TWEAK DEC(__ibmxl_ptf_fix_level__)
+
+
+#elif defined(__IBMCPP__) && !defined(__COMPILER_VER__) && __IBMCPP__ >= 800
+# define COMPILER_ID "XL"
+  /* __IBMCPP__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
+
+#elif defined(__IBMCPP__) && !defined(__COMPILER_VER__) && __IBMCPP__ < 800
+# define COMPILER_ID "VisualAge"
+  /* __IBMCPP__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
+
+#elif defined(__NVCOMPILER)
+# define COMPILER_ID "NVHPC"
+# define COMPILER_VERSION_MAJOR DEC(__NVCOMPILER_MAJOR__)
+# define COMPILER_VERSION_MINOR DEC(__NVCOMPILER_MINOR__)
+# if defined(__NVCOMPILER_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__NVCOMPILER_PATCHLEVEL__)
+# endif
+
+#elif defined(__PGI)
+# define COMPILER_ID "PGI"
+# define COMPILER_VERSION_MAJOR DEC(__PGIC__)
+# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__)
+# if defined(__PGIC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__)
+# endif
+
+#elif defined(__clang__) && defined(__cray__)
+# define COMPILER_ID "CrayClang"
+# define COMPILER_VERSION_MAJOR DEC(__cray_major__)
+# define COMPILER_VERSION_MINOR DEC(__cray_minor__)
+# define COMPILER_VERSION_PATCH DEC(__cray_patchlevel__)
+# define COMPILER_VERSION_INTERNAL_STR __clang_version__
+
+
+#elif defined(_CRAYC)
+# define COMPILER_ID "Cray"
+# define COMPILER_VERSION_MAJOR DEC(_RELEASE_MAJOR)
+# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR)
+
+#elif defined(__TI_COMPILER_VERSION__)
+# define COMPILER_ID "TI"
+  /* __TI_COMPILER_VERSION__ = VVVRRRPPP */
+# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000)
+# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000   % 1000)
+# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__        % 1000)
+
+#elif defined(__CLANG_FUJITSU)
+# define COMPILER_ID "FujitsuClang"
+# define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
+# define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
+# define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
+# define COMPILER_VERSION_INTERNAL_STR __clang_version__
+
+
+#elif defined(__FUJITSU)
+# define COMPILER_ID "Fujitsu"
+# if defined(__FCC_version__)
+#   define COMPILER_VERSION __FCC_version__
+# elif defined(__FCC_major__)
+#   define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
+#   define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
+#   define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
+# endif
+# if defined(__fcc_version)
+#   define COMPILER_VERSION_INTERNAL DEC(__fcc_version)
+# elif defined(__FCC_VERSION)
+#   define COMPILER_VERSION_INTERNAL DEC(__FCC_VERSION)
+# endif
+
+
+#elif defined(__ghs__)
+# define COMPILER_ID "GHS"
+/* __GHS_VERSION_NUMBER = VVVVRP */
+# ifdef __GHS_VERSION_NUMBER
+# define COMPILER_VERSION_MAJOR DEC(__GHS_VERSION_NUMBER / 100)
+# define COMPILER_VERSION_MINOR DEC(__GHS_VERSION_NUMBER / 10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__GHS_VERSION_NUMBER      % 10)
+# endif
+
+#elif defined(__TASKING__)
+# define COMPILER_ID "Tasking"
+  # define COMPILER_VERSION_MAJOR DEC(__VERSION__/1000)
+  # define COMPILER_VERSION_MINOR DEC(__VERSION__ % 100)
+# define COMPILER_VERSION_INTERNAL DEC(__VERSION__)
+
+#elif defined(__ORANGEC__)
+# define COMPILER_ID "OrangeC"
+# define COMPILER_VERSION_MAJOR DEC(__ORANGEC_MAJOR__)
+# define COMPILER_VERSION_MINOR DEC(__ORANGEC_MINOR__)
+# define COMPILER_VERSION_PATCH DEC(__ORANGEC_PATCHLEVEL__)
+
+#elif defined(__SCO_VERSION__)
+# define COMPILER_ID "SCO"
+
+#elif defined(__ARMCC_VERSION) && !defined(__clang__)
+# define COMPILER_ID "ARMCC"
+#if __ARMCC_VERSION >= 1000000
+  /* __ARMCC_VERSION = VRRPPPP */
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/1000000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 100)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION     % 10000)
+#else
+  /* __ARMCC_VERSION = VRPPPP */
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/100000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 10)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION    % 10000)
+#endif
+
+
+#elif defined(__clang__) && defined(__apple_build_version__)
+# define COMPILER_ID "AppleClang"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
+# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
+# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+# define COMPILER_VERSION_TWEAK DEC(__apple_build_version__)
+
+#elif defined(__clang__) && defined(__ARMCOMPILER_VERSION)
+# define COMPILER_ID "ARMClang"
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCOMPILER_VERSION/1000000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCOMPILER_VERSION/10000 % 100)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCOMPILER_VERSION/100   % 100)
+# define COMPILER_VERSION_INTERNAL DEC(__ARMCOMPILER_VERSION)
+
+#elif defined(__clang__) && defined(__ti__)
+# define COMPILER_ID "TIClang"
+  # define COMPILER_VERSION_MAJOR DEC(__ti_major__)
+  # define COMPILER_VERSION_MINOR DEC(__ti_minor__)
+  # define COMPILER_VERSION_PATCH DEC(__ti_patchlevel__)
+# define COMPILER_VERSION_INTERNAL DEC(__ti_version__)
+
+#elif defined(__clang__)
+# define COMPILER_ID "Clang"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
+# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
+# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+
+#elif defined(__LCC__) && (defined(__GNUC__) || defined(__GNUG__) || defined(__MCST__))
+# define COMPILER_ID "LCC"
+# define COMPILER_VERSION_MAJOR DEC(__LCC__ / 100)
+# define COMPILER_VERSION_MINOR DEC(__LCC__ % 100)
+# if defined(__LCC_MINOR__)
+#  define COMPILER_VERSION_PATCH DEC(__LCC_MINOR__)
+# endif
+# if defined(__GNUC__) && defined(__GNUC_MINOR__)
+#  define SIMULATE_ID "GNU"
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+#  if defined(__GNUC_PATCHLEVEL__)
+#   define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+#  endif
+# endif
+
+#elif defined(__GNUC__) || defined(__GNUG__)
+# define COMPILER_ID "GNU"
+# if defined(__GNUC__)
+#  define COMPILER_VERSION_MAJOR DEC(__GNUC__)
+# else
+#  define COMPILER_VERSION_MAJOR DEC(__GNUG__)
+# endif
+# if defined(__GNUC_MINOR__)
+#  define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__)
+# endif
+# if defined(__GNUC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+# endif
+
+#elif defined(_MSC_VER)
+# define COMPILER_ID "MSVC"
+  /* _MSC_VER = VVRR */
+# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100)
+# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100)
+# if defined(_MSC_FULL_VER)
+#  if _MSC_VER >= 1400
+    /* _MSC_FULL_VER = VVRRPPPPP */
+#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000)
+#  else
+    /* _MSC_FULL_VER = VVRRPPPP */
+#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000)
+#  endif
+# endif
+# if defined(_MSC_BUILD)
+#  define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD)
+# endif
+
+#elif defined(_ADI_COMPILER)
+# define COMPILER_ID "ADSP"
+#if defined(__VERSIONNUM__)
+  /* __VERSIONNUM__ = 0xVVRRPPTT */
+#  define COMPILER_VERSION_MAJOR DEC(__VERSIONNUM__ >> 24 & 0xFF)
+#  define COMPILER_VERSION_MINOR DEC(__VERSIONNUM__ >> 16 & 0xFF)
+#  define COMPILER_VERSION_PATCH DEC(__VERSIONNUM__ >> 8 & 0xFF)
+#  define COMPILER_VERSION_TWEAK DEC(__VERSIONNUM__ & 0xFF)
+#endif
+
+#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
+# define COMPILER_ID "IAR"
+# if defined(__VER__) && defined(__ICCARM__)
+#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 1000000)
+#  define COMPILER_VERSION_MINOR DEC(((__VER__) / 1000) % 1000)
+#  define COMPILER_VERSION_PATCH DEC((__VER__) % 1000)
+#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
+# elif defined(__VER__) && (defined(__ICCAVR__) || defined(__ICCRX__) || defined(__ICCRH850__) || defined(__ICCRL78__) || defined(__ICC430__) || defined(__ICCRISCV__) || defined(__ICCV850__) || defined(__ICC8051__) || defined(__ICCSTM8__))
+#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 100)
+#  define COMPILER_VERSION_MINOR DEC((__VER__) - (((__VER__) / 100)*100))
+#  define COMPILER_VERSION_PATCH DEC(__SUBVERSION__)
+#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
+# endif
+
+
+/* These compilers are either not known or too old to define an
+  identification macro.  Try to identify the platform and guess that
+  it is the native compiler.  */
+#elif defined(__hpux) || defined(__hpua)
+# define COMPILER_ID "HP"
+
+#else /* unknown compiler */
+# define COMPILER_ID ""
+#endif
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
+#ifdef SIMULATE_ID
+char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
+#endif
+
+#ifdef __QNXNTO__
+char const* qnxnto = "INFO" ":" "qnxnto[]";
+#endif
+
+#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
+char const *info_cray = "INFO" ":" "compiler_wrapper[CrayPrgEnv]";
+#endif
+
+#define STRINGIFY_HELPER(X) #X
+#define STRINGIFY(X) STRINGIFY_HELPER(X)
+
+/* Identify known platforms by name.  */
+#if defined(__linux) || defined(__linux__) || defined(linux)
+# define PLATFORM_ID "Linux"
+
+#elif defined(__MSYS__)
+# define PLATFORM_ID "MSYS"
+
+#elif defined(__CYGWIN__)
+# define PLATFORM_ID "Cygwin"
+
+#elif defined(__MINGW32__)
+# define PLATFORM_ID "MinGW"
+
+#elif defined(__APPLE__)
+# define PLATFORM_ID "Darwin"
+
+#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
+# define PLATFORM_ID "Windows"
+
+#elif defined(__FreeBSD__) || defined(__FreeBSD)
+# define PLATFORM_ID "FreeBSD"
+
+#elif defined(__NetBSD__) || defined(__NetBSD)
+# define PLATFORM_ID "NetBSD"
+
+#elif defined(__OpenBSD__) || defined(__OPENBSD)
+# define PLATFORM_ID "OpenBSD"
+
+#elif defined(__sun) || defined(sun)
+# define PLATFORM_ID "SunOS"
+
+#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
+# define PLATFORM_ID "AIX"
+
+#elif defined(__hpux) || defined(__hpux__)
+# define PLATFORM_ID "HP-UX"
+
+#elif defined(__HAIKU__)
+# define PLATFORM_ID "Haiku"
+
+#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
+# define PLATFORM_ID "BeOS"
+
+#elif defined(__QNX__) || defined(__QNXNTO__)
+# define PLATFORM_ID "QNX"
+
+#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
+# define PLATFORM_ID "Tru64"
+
+#elif defined(__riscos) || defined(__riscos__)
+# define PLATFORM_ID "RISCos"
+
+#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
+# define PLATFORM_ID "SINIX"
+
+#elif defined(__UNIX_SV__)
+# define PLATFORM_ID "UNIX_SV"
+
+#elif defined(__bsdos__)
+# define PLATFORM_ID "BSDOS"
+
+#elif defined(_MPRAS) || defined(MPRAS)
+# define PLATFORM_ID "MP-RAS"
+
+#elif defined(__osf) || defined(__osf__)
+# define PLATFORM_ID "OSF1"
+
+#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
+# define PLATFORM_ID "SCO_SV"
+
+#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
+# define PLATFORM_ID "ULTRIX"
+
+#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
+# define PLATFORM_ID "Xenix"
+
+#elif defined(__WATCOMC__)
+# if defined(__LINUX__)
+#  define PLATFORM_ID "Linux"
+
+# elif defined(__DOS__)
+#  define PLATFORM_ID "DOS"
+
+# elif defined(__OS2__)
+#  define PLATFORM_ID "OS2"
+
+# elif defined(__WINDOWS__)
+#  define PLATFORM_ID "Windows3x"
+
+# elif defined(__VXWORKS__)
+#  define PLATFORM_ID "VxWorks"
+
+# else /* unknown platform */
+#  define PLATFORM_ID
+# endif
+
+#elif defined(__INTEGRITY)
+# if defined(INT_178B)
+#  define PLATFORM_ID "Integrity178"
+
+# else /* regular Integrity */
+#  define PLATFORM_ID "Integrity"
+# endif
+
+# elif defined(_ADI_COMPILER)
+#  define PLATFORM_ID "ADSP"
+
+#else /* unknown platform */
+# define PLATFORM_ID
+
+#endif
+
+/* For windows compilers MSVC and Intel we can determine
+   the architecture of the compiler being used.  This is because
+   the compilers do not have flags that can change the architecture,
+   but rather depend on which compiler is being used
+*/
+#if defined(_WIN32) && defined(_MSC_VER)
+# if defined(_M_IA64)
+#  define ARCHITECTURE_ID "IA64"
+
+# elif defined(_M_ARM64EC)
+#  define ARCHITECTURE_ID "ARM64EC"
+
+# elif defined(_M_X64) || defined(_M_AMD64)
+#  define ARCHITECTURE_ID "x64"
+
+# elif defined(_M_IX86)
+#  define ARCHITECTURE_ID "X86"
+
+# elif defined(_M_ARM64)
+#  define ARCHITECTURE_ID "ARM64"
+
+# elif defined(_M_ARM)
+#  if _M_ARM == 4
+#   define ARCHITECTURE_ID "ARMV4I"
+#  elif _M_ARM == 5
+#   define ARCHITECTURE_ID "ARMV5I"
+#  else
+#   define ARCHITECTURE_ID "ARMV" STRINGIFY(_M_ARM)
+#  endif
+
+# elif defined(_M_MIPS)
+#  define ARCHITECTURE_ID "MIPS"
+
+# elif defined(_M_SH)
+#  define ARCHITECTURE_ID "SHx"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__WATCOMC__)
+# if defined(_M_I86)
+#  define ARCHITECTURE_ID "I86"
+
+# elif defined(_M_IX86)
+#  define ARCHITECTURE_ID "X86"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
+# if defined(__ICCARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__ICCRX__)
+#  define ARCHITECTURE_ID "RX"
+
+# elif defined(__ICCRH850__)
+#  define ARCHITECTURE_ID "RH850"
+
+# elif defined(__ICCRL78__)
+#  define ARCHITECTURE_ID "RL78"
+
+# elif defined(__ICCRISCV__)
+#  define ARCHITECTURE_ID "RISCV"
+
+# elif defined(__ICCAVR__)
+#  define ARCHITECTURE_ID "AVR"
+
+# elif defined(__ICC430__)
+#  define ARCHITECTURE_ID "MSP430"
+
+# elif defined(__ICCV850__)
+#  define ARCHITECTURE_ID "V850"
+
+# elif defined(__ICC8051__)
+#  define ARCHITECTURE_ID "8051"
+
+# elif defined(__ICCSTM8__)
+#  define ARCHITECTURE_ID "STM8"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__ghs__)
+# if defined(__PPC64__)
+#  define ARCHITECTURE_ID "PPC64"
+
+# elif defined(__ppc__)
+#  define ARCHITECTURE_ID "PPC"
+
+# elif defined(__ARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__x86_64__)
+#  define ARCHITECTURE_ID "x64"
+
+# elif defined(__i386__)
+#  define ARCHITECTURE_ID "X86"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__clang__) && defined(__ti__)
+# if defined(__ARM_ARCH)
+#  define ARCHITECTURE_ID "Arm"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__TI_COMPILER_VERSION__)
+# if defined(__TI_ARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__MSP430__)
+#  define ARCHITECTURE_ID "MSP430"
+
+# elif defined(__TMS320C28XX__)
+#  define ARCHITECTURE_ID "TMS320C28x"
+
+# elif defined(__TMS320C6X__) || defined(_TMS320C6X)
+#  define ARCHITECTURE_ID "TMS320C6x"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+# elif defined(__ADSPSHARC__)
+#  define ARCHITECTURE_ID "SHARC"
+
+# elif defined(__ADSPBLACKFIN__)
+#  define ARCHITECTURE_ID "Blackfin"
+
+#elif defined(__TASKING__)
+
+# if defined(__CTC__) || defined(__CPTC__)
+#  define ARCHITECTURE_ID "TriCore"
+
+# elif defined(__CMCS__)
+#  define ARCHITECTURE_ID "MCS"
+
+# elif defined(__CARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__CARC__)
+#  define ARCHITECTURE_ID "ARC"
+
+# elif defined(__C51__)
+#  define ARCHITECTURE_ID "8051"
+
+# elif defined(__CPCP__)
+#  define ARCHITECTURE_ID "PCP"
+
+# else
+#  define ARCHITECTURE_ID ""
+# endif
+
+#else
+#  define ARCHITECTURE_ID
+#endif
+
+/* Convert integer to decimal digit literals.  */
+#define DEC(n)                   \
+  ('0' + (((n) / 10000000)%10)), \
+  ('0' + (((n) / 1000000)%10)),  \
+  ('0' + (((n) / 100000)%10)),   \
+  ('0' + (((n) / 10000)%10)),    \
+  ('0' + (((n) / 1000)%10)),     \
+  ('0' + (((n) / 100)%10)),      \
+  ('0' + (((n) / 10)%10)),       \
+  ('0' +  ((n) % 10))
+
+/* Convert integer to hex digit literals.  */
+#define HEX(n)             \
+  ('0' + ((n)>>28 & 0xF)), \
+  ('0' + ((n)>>24 & 0xF)), \
+  ('0' + ((n)>>20 & 0xF)), \
+  ('0' + ((n)>>16 & 0xF)), \
+  ('0' + ((n)>>12 & 0xF)), \
+  ('0' + ((n)>>8  & 0xF)), \
+  ('0' + ((n)>>4  & 0xF)), \
+  ('0' + ((n)     & 0xF))
+
+/* Construct a string literal encoding the version number. */
+#ifdef COMPILER_VERSION
+char const* info_version = "INFO" ":" "compiler_version[" COMPILER_VERSION "]";
+
+/* Construct a string literal encoding the version number components. */
+#elif defined(COMPILER_VERSION_MAJOR)
+char const info_version[] = {
+  'I', 'N', 'F', 'O', ':',
+  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[',
+  COMPILER_VERSION_MAJOR,
+# ifdef COMPILER_VERSION_MINOR
+  '.', COMPILER_VERSION_MINOR,
+#  ifdef COMPILER_VERSION_PATCH
+   '.', COMPILER_VERSION_PATCH,
+#   ifdef COMPILER_VERSION_TWEAK
+    '.', COMPILER_VERSION_TWEAK,
+#   endif
+#  endif
+# endif
+  ']','\0'};
+#endif
+
+/* Construct a string literal encoding the internal version number. */
+#ifdef COMPILER_VERSION_INTERNAL
+char const info_version_internal[] = {
+  'I', 'N', 'F', 'O', ':',
+  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','_',
+  'i','n','t','e','r','n','a','l','[',
+  COMPILER_VERSION_INTERNAL,']','\0'};
+#elif defined(COMPILER_VERSION_INTERNAL_STR)
+char const* info_version_internal = "INFO" ":" "compiler_version_internal[" COMPILER_VERSION_INTERNAL_STR "]";
+#endif
+
+/* Construct a string literal encoding the version number components. */
+#ifdef SIMULATE_VERSION_MAJOR
+char const info_simulate_version[] = {
+  'I', 'N', 'F', 'O', ':',
+  's','i','m','u','l','a','t','e','_','v','e','r','s','i','o','n','[',
+  SIMULATE_VERSION_MAJOR,
+# ifdef SIMULATE_VERSION_MINOR
+  '.', SIMULATE_VERSION_MINOR,
+#  ifdef SIMULATE_VERSION_PATCH
+   '.', SIMULATE_VERSION_PATCH,
+#   ifdef SIMULATE_VERSION_TWEAK
+    '.', SIMULATE_VERSION_TWEAK,
+#   endif
+#  endif
+# endif
+  ']','\0'};
+#endif
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]";
+char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]";
+
+
+
+#define CXX_STD_98 199711L
+#define CXX_STD_11 201103L
+#define CXX_STD_14 201402L
+#define CXX_STD_17 201703L
+#define CXX_STD_20 202002L
+#define CXX_STD_23 202302L
+
+#if defined(__INTEL_COMPILER) && defined(_MSVC_LANG)
+#  if _MSVC_LANG > CXX_STD_17
+#    define CXX_STD _MSVC_LANG
+#  elif _MSVC_LANG == CXX_STD_17 && defined(__cpp_aggregate_paren_init)
+#    define CXX_STD CXX_STD_20
+#  elif _MSVC_LANG > CXX_STD_14 && __cplusplus > CXX_STD_17
+#    define CXX_STD CXX_STD_20
+#  elif _MSVC_LANG > CXX_STD_14
+#    define CXX_STD CXX_STD_17
+#  elif defined(__INTEL_CXX11_MODE__) && defined(__cpp_aggregate_nsdmi)
+#    define CXX_STD CXX_STD_14
+#  elif defined(__INTEL_CXX11_MODE__)
+#    define CXX_STD CXX_STD_11
+#  else
+#    define CXX_STD CXX_STD_98
+#  endif
+#elif defined(_MSC_VER) && defined(_MSVC_LANG)
+#  if _MSVC_LANG > __cplusplus
+#    define CXX_STD _MSVC_LANG
+#  else
+#    define CXX_STD __cplusplus
+#  endif
+#elif defined(__NVCOMPILER)
+#  if __cplusplus == CXX_STD_17 && defined(__cpp_aggregate_paren_init)
+#    define CXX_STD CXX_STD_20
+#  else
+#    define CXX_STD __cplusplus
+#  endif
+#elif defined(__INTEL_COMPILER) || defined(__PGI)
+#  if __cplusplus == CXX_STD_11 && defined(__cpp_namespace_attributes)
+#    define CXX_STD CXX_STD_17
+#  elif __cplusplus == CXX_STD_11 && defined(__cpp_aggregate_nsdmi)
+#    define CXX_STD CXX_STD_14
+#  else
+#    define CXX_STD __cplusplus
+#  endif
+#elif (defined(__IBMCPP__) || defined(__ibmxl__)) && defined(__linux__)
+#  if __cplusplus == CXX_STD_11 && defined(__cpp_aggregate_nsdmi)
+#    define CXX_STD CXX_STD_14
+#  else
+#    define CXX_STD __cplusplus
+#  endif
+#elif __cplusplus == 1 && defined(__GXX_EXPERIMENTAL_CXX0X__)
+#  define CXX_STD CXX_STD_11
+#else
+#  define CXX_STD __cplusplus
+#endif
+
+const char* info_language_standard_default = "INFO" ":" "standard_default["
+#if CXX_STD > CXX_STD_23
+  "26"
+#elif CXX_STD > CXX_STD_20
+  "23"
+#elif CXX_STD > CXX_STD_17
+  "20"
+#elif CXX_STD > CXX_STD_14
+  "17"
+#elif CXX_STD > CXX_STD_11
+  "14"
+#elif CXX_STD >= CXX_STD_11
+  "11"
+#else
+  "98"
+#endif
+"]";
+
+const char* info_language_extensions_default = "INFO" ":" "extensions_default["
+#if (defined(__clang__) || defined(__GNUC__) || defined(__xlC__) ||           \
+     defined(__TI_COMPILER_VERSION__)) &&                                     \
+  !defined(__STRICT_ANSI__)
+  "ON"
+#else
+  "OFF"
+#endif
+"]";
+
+/*--------------------------------------------------------------------------*/
+
+int main(int argc, char* argv[])
+{
+  int require = 0;
+  require += info_compiler[argc];
+  require += info_platform[argc];
+  require += info_arch[argc];
+#ifdef COMPILER_VERSION_MAJOR
+  require += info_version[argc];
+#endif
+#ifdef COMPILER_VERSION_INTERNAL
+  require += info_version_internal[argc];
+#endif
+#ifdef SIMULATE_ID
+  require += info_simulate[argc];
+#endif
+#ifdef SIMULATE_VERSION_MAJOR
+  require += info_simulate_version[argc];
+#endif
+#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
+  require += info_cray[argc];
+#endif
+  require += info_language_standard_default[argc];
+  require += info_language_extensions_default[argc];
+  (void)argv;
+  return require;
+}
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
new file mode 100755
index 0000000000000000000000000000000000000000..78617c271080d9e2231a72abde01b7fc302df0f2
GIT binary patch
literal 15576
zcmeHOU2Ggz6~4Pp8VBO66YAo|6&V#&xfD-!9mi|~rt8>ik0t+<)Dfm3Ovbxod&T}S
zI~zHbfFJ|KSgHCWK^`a|p+10AK_ygpp*RW@f?AY5AVqyZE~1jD($*C}N=fA9oO{n%
z&tBFAfj~UWwRX;&@0{=4JLk^qT+f{SLVA288i@#QE#hMWHKSc2DKcC=LOUQ*A}QKn
zdxz)}w}8GwV#=OU0<5ZCjW)_w!dpNhuM>Bg$U77aeW=DGM2WoZ+65dCG?s#n19>~q
zK)Nnpqz+iJz22XJWN3!m*5yZu$1=#np{(^N|FwZeIYW6lO_F)2B5#9u8^mLIh5BR3
z`NW*yCrSC#WeRNAQgSPV&RZm&E{DmVCH8^sfmi+Pzti9S#CySzVT3MuzFBgA9|s;y
zts?%DEl=}t>TkPwFev{lDZS!QJ~!LncPO9j$>)mI#h%4ve@}m(St*&lvS%Du96oqX
zjZU5r(Q{%IG3G}^q(P684lc5x@2&8`v?ITo{Nh`0EI$0;<EPL3@J07)HwJ$F*z4$n
z$AK}?2ODDe;f6N;F!ry=8F0F@iQ@=h`<vi64x<T<eK*5Dv<)t7d%jRA+7;jNeA^cG
z*z|;*bv<`JSMgnMdSWPFD!S9oY~EG2<`x^KCqqFBPOb=HGmDNrmn%B?+(WJabH&eQ
z?zsnNtRK}veQ!PkOw<yHXB0j<K6Y%#?llkh3Eu5B<#%2b<_KmJ{;)+vR6GKb&#xan
z_H{TdTf_yzst0nr1^9dyouTn{&(~Y~K83H-b<OxH1#C?zJL9akYq()3zfKMJ2sbqR
zVZysL{0YM28vZoltM>`n;2<djO8->=r%Om0t^{!UN|E^003JMl*8;fwepcbbZJ2>D
z17QZj41^g7GZ1DV%)oys1AmIW?{C)9wN`6o=jB5}SYKZCqqQs6($8Bj$sW<3czta7
zrB7SSzqgkDuyOx%I<cC#Y@Hu?860XIOThZ`oEba#CFu|ND;Vee&X-Z#d)@DV&~p@e
zcWo_p@Ekf`A_@M_NdF_>M{)P2wY*_neB(ar;`J6Q^1SuZrhh90I6?thYio0{gTq^V
z9N)Qt0+>bh@Cj>a;58F=t>st!Hfv?zF2HLYR{>hj)M~ZocMby(Idy4kyqD&-_G1TA
z0^|L09(+$gjOEW=vzDuCzf9l6AzLdQzk^6C>1);nD{>|FtcX3g8cE*-{5RX+&o#qU
zfb$&}_X-hvc1L?X%7td$5dEvo@Rjt<Q!qvK`K!+u4mE6H2Eq)483;2FW+2Q!n1L_@
zVFtnsgc%4k5N4n;1Nc7co!Z#s$kfqHsZh@4UGF5kg*?^h-C(!RxLze!DxQqXmgqCp
zPP~_Q5~qY@l=F^1SMmxc$MNkdfsU71I7$2Pez2HzyezyMoO7yq|77CBWN{aLw}`z|
z>b9v#IjTrk%SSq4cz8t9Z`NvkASX6zwQ-R6t`%G4q2nU5*dFQHv#a${c%_FpzH9CT
z|GUs(c$a(=hZyqT2K*_+2luvrB|6l0OY}RyL?CQo2Eq)483;2FW+2Q!n1L_@VFtns
zgc<n%$^h3Ja($tyViaPYhROOFO+TmUkC48HBo{!ok-kcGjklA|b&p-7^S?|7Nay-T
zuJdL4Up8wcbXle1L9PibQ_&#SA!1u2`@57Xen9fwB=P@1Y#mC}x4UTXGzI2<lavT3
z-jt2`H)?7;07}<Q(&NO3H^p+ioJaU~Q|boU-zJ^=q4586!S&<Yb<B09hM_#Tj+E<0
zxlWYpLPv*&jvC$YJm78v{>|?-6Gm^mw=bTI9}(M_?oGtE>l|>*-wyFsO?Sb0h={!+
zWhhH;z@eG{2c<n$uPbMFEVqq__Xs@?BNFcr>r{uz{-1)Kc5$0XrWjEY>--JCg@$Lq
zybs0+M%lQ=)dTHL1vPBXgSKDn5x3KI^AuSh2e~hLo8b9i(zg+Ze)W3arwKPw%9GEt
zAA`C-+9vqAR8}E=ia09)iNzckKb}$`$GJgxyN0JA4>*2<>XzlR6Y$-QcoeQe!c{aV
zbO0QWOV4K);?Qrm7XK*Vn14ObqY{6wNRdCsA17RoKLfbIP66p}gD-7^i=heUGw#sL
z%n&^b8_SxRa#`39jwgC^#kmqc`+`bzxGL<lWse*moJiZ&@Nr=ee{yngVr)p*qvKP@
z2FLBGk&y?|)Asb>vGFw2z`I$;cc9#T3M$&OxuRXIxLK{DJr%4<r;7J%rDQL_V=^d}
zmm}bZYD&YWX#y+aa}Y`^m#;^Ia(7A1JH`2`Gw<5}_;gJ<@FPHBLqH!QLZ!Z)o*ae}
z{>A|MgFA4=qf@o|aHvH*ve`<7fp@C^Z}L-trauP|X60<bcV<EQo{|f^mn*{03d+JP
zmVDQoFILU6S1P-ne>MQkR&($}k6f0Z!DC}RzB4bR`+`$h5N7sl5xP*)_mqVmb~Y$B
z*gQAyAVHWiRi+O)6{egB(<{lTHr)k#&T|T`y^sY4Yl>kzp69^ukiq*9&MD+F&{qj!
z!Nx4-VMhgnYzh-5sNfd;z$yM8?c#kKE`|Ej;ZC~WvgG?VcY?mb_I^<CUK=GaNqm+m
z!ddY54eR}|6XY)vpXCSGktBcLGCZd7ze#+S20N0}`JVv%uW;|?@$-6wB_BVpNA&SK
zz{j-+^Lf3(@=@v+j}ddnd|r3t0K*|OpVvPudA$QJvg!H%ETFhHVLq=%Sn@iK$IpH&
zKM#Cd>#)x2ow`)r$~g*-pJ0LaH_R#XdA-Gw*IV4be*E76F2-eh{eD9C6<$|@i){M*
zJqc)#&-W>o-_jDM-LB;CcY=JrkFw--FLmGWn=Hh>NB#5h3j<MThTMwFO4PRm*Y#&$
z5Bq2S3*^9(&p#&U$Nw{pzfOFX(@Z4E`DYl%2df!*4kE_udHx-p?$0{Q-vTEV;PZNa
zy$7Rho$pH9(wYAX7;x_CvaPS%_;-=~`$t~SGmq!-HQ-|Yn9sjsT0I0Hv~DHpTjsNT
z6D&bKuMgLW&(|pjU>?is8egQyGp=NkR2Ix*eG_&N<MH#lCP{qVAIBPOEdU@!?sXIM
z@%uH{m>-mU?gjnI6!0fxJOD<V10E0OWjA0v_8`Ceu+pC7j>xE~uqJHI{{_C3gSJN_
HXsY--f}ZvE

literal 0
HcmV?d00001

diff --git a/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml b/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
new file mode 100644
index 00000000000..ea990e46285
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
@@ -0,0 +1,562 @@
+
+---
+events:
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineSystem.cmake:205 (message)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      The system is: Linux - 6.10.2-273-tkg-eevdf - x86_64
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:17 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:64 (__determine_compiler_id_test)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCCompiler.cmake:123 (CMAKE_DETERMINE_COMPILER_ID)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Compiling the C compiler identification source file "CMakeCCompilerId.c" succeeded.
+      Compiler: /usr/bin/cc 
+      Build flags: 
+      Id flags:  
+      
+      The output was:
+      0
+      
+      
+      Compilation of the C compiler identification source "CMakeCCompilerId.c" produced "a.out"
+      
+      The C compiler identification is GNU, found in:
+        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:17 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:64 (__determine_compiler_id_test)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCXXCompiler.cmake:126 (CMAKE_DETERMINE_COMPILER_ID)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" succeeded.
+      Compiler: /usr/bin/c++ 
+      Build flags: 
+      Id flags:  
+      
+      The output was:
+      0
+      
+      
+      Compilation of the CXX compiler identification source "CMakeCXXCompilerId.cpp" produced "a.out"
+      
+      The CXX compiler identification is GNU, found in:
+        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
+      
+  -
+    kind: "try_compile-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:74 (try_compile)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    checks:
+      - "Detecting C compiler ABI info"
+    directories:
+      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-UosbFc"
+      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-UosbFc"
+    cmakeVariables:
+      CMAKE_C_FLAGS: ""
+      CMAKE_C_FLAGS_DEBUG: "-g"
+      CMAKE_EXE_LINKER_FLAGS: ""
+    buildResult:
+      variable: "CMAKE_C_ABI_COMPILED"
+      cached: true
+      stdout: |
+        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-UosbFc'
+        
+        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_332c1
+        [1/2] /usr/bin/cc   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c
+        Using built-in specs.
+        COLLECT_GCC=/usr/bin/cc
+        Target: x86_64-pc-linux-gnu
+        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
+        Thread model: posix
+        Supported LTO compression algorithms: zlib zstd
+        gcc version 14.2.1 20240910 (GCC) 
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/'
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1 -quiet -v /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c -quiet -dumpdir CMakeFiles/cmTC_332c1.dir/ -dumpbase CMakeCCompilerABI.c.c -dumpbase-ext .c -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/cce4ofAB.s
+        GNU C17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)
+        	compiled by GNU C version 14.2.1 20240910, GMP version 6.3.0, MPFR version 4.2.1, MPC version 1.3.1, isl version isl-0.27-GMP
+        
+        GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
+        ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"
+        #include "..." search starts here:
+        #include <...> search starts here:
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include
+         /usr/local/include
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed
+         /usr/include
+        End of search list.
+        Compiler executable checksum: 91e980a230f7d2e39f93577991713edd
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/'
+         as -v --64 -o CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o /tmp/cce4ofAB.s
+        GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0
+        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
+        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.'
+        [2/2] : && /usr/bin/cc  -v -Wl,-v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -o cmTC_332c1   && :
+        Using built-in specs.
+        COLLECT_GCC=/usr/bin/cc
+        COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper
+        Target: x86_64-pc-linux-gnu
+        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
+        Thread model: posix
+        Supported LTO compression algorithms: zlib zstd
+        gcc version 14.2.1 20240910 (GCC) 
+        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
+        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
+        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_332c1' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_332c1.'
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccURuGYB.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_332c1 /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
+        collect2 version 14.2.1 20240910
+        /usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccURuGYB.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_332c1 /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
+        GNU ld (GNU Binutils) 2.43.0
+        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_332c1' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_332c1.'
+        
+      exitCode: 0
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:182 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Parsed C implicit include dir info: rv=done
+        found start of include info
+        found start of implicit include info
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+          add: [/usr/local/include]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+          add: [/usr/include]
+        end of search list found
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+        collapse include dir [/usr/local/include] ==> [/usr/local/include]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+        collapse include dir [/usr/include] ==> [/usr/include]
+        implicit include dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include]
+      
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:218 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Parsed C implicit link information:
+        link line regex: [^( *|.*[/\\])(ld[0-9]*(\\.[a-z]+)?|CMAKE_LINK_STARTFILE-NOTFOUND|([^/\\]+-)?ld|collect2)[^/\\]*( |$)]
+        linker tool regex: [^[ 	]*(->|")?[ 	]*(([^"]*[/\\])?(ld[0-9]*(\\.[a-z]+)?))("|,| |$)]
+        ignore line: [Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-UosbFc']
+        ignore line: []
+        ignore line: [Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_332c1]
+        ignore line: [[1/2] /usr/bin/cc   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c]
+        ignore line: [Using built-in specs.]
+        ignore line: [COLLECT_GCC=/usr/bin/cc]
+        ignore line: [Target: x86_64-pc-linux-gnu]
+        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
+        ignore line: [Thread model: posix]
+        ignore line: [Supported LTO compression algorithms: zlib zstd]
+        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/']
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1 -quiet -v /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c -quiet -dumpdir CMakeFiles/cmTC_332c1.dir/ -dumpbase CMakeCCompilerABI.c.c -dumpbase-ext .c -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/cce4ofAB.s]
+        ignore line: [GNU C17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)]
+        ignore line: [	compiled by GNU C version 14.2.1 20240910  GMP version 6.3.0  MPFR version 4.2.1  MPC version 1.3.1  isl version isl-0.27-GMP]
+        ignore line: []
+        ignore line: [GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072]
+        ignore line: [ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"]
+        ignore line: [#include "..." search starts here:]
+        ignore line: [#include <...> search starts here:]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+        ignore line: [ /usr/local/include]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+        ignore line: [ /usr/include]
+        ignore line: [End of search list.]
+        ignore line: [Compiler executable checksum: 91e980a230f7d2e39f93577991713edd]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/']
+        ignore line: [ as -v --64 -o CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o /tmp/cce4ofAB.s]
+        ignore line: [GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0]
+        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
+        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.']
+        ignore line: [[2/2] : && /usr/bin/cc  -v -Wl -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -o cmTC_332c1   && :]
+        ignore line: [Using built-in specs.]
+        ignore line: [COLLECT_GCC=/usr/bin/cc]
+        ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper]
+        ignore line: [Target: x86_64-pc-linux-gnu]
+        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
+        ignore line: [Thread model: posix]
+        ignore line: [Supported LTO compression algorithms: zlib zstd]
+        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
+        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
+        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
+        ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_332c1' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_332c1.']
+        link line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccURuGYB.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_332c1 /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2] ==> ignore
+          arg [-plugin] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so] ==> ignore
+          arg [-plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper] ==> ignore
+          arg [-plugin-opt=-fresolution=/tmp/ccURuGYB.res] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
+          arg [-plugin-opt=-pass-through=-lc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
+          arg [--build-id] ==> ignore
+          arg [--eh-frame-hdr] ==> ignore
+          arg [--hash-style=gnu] ==> ignore
+          arg [-m] ==> ignore
+          arg [elf_x86_64] ==> ignore
+          arg [-dynamic-linker] ==> ignore
+          arg [/lib64/ld-linux-x86-64.so.2] ==> ignore
+          arg [-pie] ==> ignore
+          arg [-o] ==> ignore
+          arg [cmTC_332c1] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib]
+          arg [-L/lib/../lib] ==> dir [/lib/../lib]
+          arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..]
+          arg [-v] ==> ignore
+          arg [CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o] ==> ignore
+          arg [-lgcc] ==> lib [gcc]
+          arg [--push-state] ==> ignore
+          arg [--as-needed] ==> ignore
+          arg [-lgcc_s] ==> lib [gcc_s]
+          arg [--pop-state] ==> ignore
+          arg [-lc] ==> lib [c]
+          arg [-lgcc] ==> lib [gcc]
+          arg [--push-state] ==> ignore
+          arg [--as-needed] ==> ignore
+          arg [-lgcc_s] ==> lib [gcc_s]
+          arg [--pop-state] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+        ignore line: [collect2 version 14.2.1 20240910]
+        ignore line: [/usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccURuGYB.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_332c1 /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+        linker tool for 'C': /usr/bin/ld
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> [/usr/lib/Scrt1.o]
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> [/usr/lib/crti.o]
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> [/usr/lib/crtn.o]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> [/usr/lib]
+        collapse library dir [/lib/../lib] ==> [/lib]
+        collapse library dir [/usr/lib/../lib] ==> [/usr/lib]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> [/usr/lib]
+        implicit libs: [gcc;gcc_s;c;gcc;gcc_s]
+        implicit objs: [/usr/lib/Scrt1.o;/usr/lib/crti.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o;/usr/lib/crtn.o]
+        implicit dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib]
+        implicit fwks: []
+      
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CMakeDetermineLinkerId.cmake:40 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:255 (cmake_determine_linker_id)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Running the C compiler's linker: "/usr/bin/ld" "-v"
+      GNU ld (GNU Binutils) 2.43.0
+  -
+    kind: "try_compile-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:74 (try_compile)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    checks:
+      - "Detecting CXX compiler ABI info"
+    directories:
+      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-Ii9uQJ"
+      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-Ii9uQJ"
+    cmakeVariables:
+      CMAKE_CXX_FLAGS: ""
+      CMAKE_CXX_FLAGS_DEBUG: "-g"
+      CMAKE_CXX_SCAN_FOR_MODULES: "OFF"
+      CMAKE_EXE_LINKER_FLAGS: ""
+    buildResult:
+      variable: "CMAKE_CXX_ABI_COMPILED"
+      cached: true
+      stdout: |
+        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-Ii9uQJ'
+        
+        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_1c87e
+        [1/2] /usr/bin/c++   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp
+        Using built-in specs.
+        COLLECT_GCC=/usr/bin/c++
+        Target: x86_64-pc-linux-gnu
+        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
+        Thread model: posix
+        Supported LTO compression algorithms: zlib zstd
+        gcc version 14.2.1 20240910 (GCC) 
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/'
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1plus -quiet -v -D_GNU_SOURCE /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp -quiet -dumpdir CMakeFiles/cmTC_1c87e.dir/ -dumpbase CMakeCXXCompilerABI.cpp.cpp -dumpbase-ext .cpp -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/ccI2PFmy.s
+        GNU C++17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)
+        	compiled by GNU C version 14.2.1 20240910, GMP version 6.3.0, MPFR version 4.2.1, MPC version 1.3.1, isl version isl-0.27-GMP
+        
+        GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
+        ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"
+        #include "..." search starts here:
+        #include <...> search starts here:
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include
+         /usr/local/include
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed
+         /usr/include
+        End of search list.
+        Compiler executable checksum: fce5a105c47978e141f61a441742cadf
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/'
+         as -v --64 -o CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o /tmp/ccI2PFmy.s
+        GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0
+        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
+        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.'
+        [2/2] : && /usr/bin/c++  -v -Wl,-v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -o cmTC_1c87e   && :
+        Using built-in specs.
+        COLLECT_GCC=/usr/bin/c++
+        COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper
+        Target: x86_64-pc-linux-gnu
+        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
+        Thread model: posix
+        Supported LTO compression algorithms: zlib zstd
+        gcc version 14.2.1 20240910 (GCC) 
+        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
+        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
+        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_1c87e' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_1c87e.'
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cczdPYYx.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_1c87e /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
+        collect2 version 14.2.1 20240910
+        /usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cczdPYYx.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_1c87e /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
+        GNU ld (GNU Binutils) 2.43.0
+        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_1c87e' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_1c87e.'
+        
+      exitCode: 0
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:182 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Parsed CXX implicit include dir info: rv=done
+        found start of include info
+        found start of implicit include info
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+          add: [/usr/local/include]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+          add: [/usr/include]
+        end of search list found
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1] ==> [/usr/include/c++/14.2.1]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu] ==> [/usr/include/c++/14.2.1/x86_64-pc-linux-gnu]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward] ==> [/usr/include/c++/14.2.1/backward]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+        collapse include dir [/usr/local/include] ==> [/usr/local/include]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+        collapse include dir [/usr/include] ==> [/usr/include]
+        implicit include dirs: [/usr/include/c++/14.2.1;/usr/include/c++/14.2.1/x86_64-pc-linux-gnu;/usr/include/c++/14.2.1/backward;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include]
+      
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:218 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Parsed CXX implicit link information:
+        link line regex: [^( *|.*[/\\])(ld[0-9]*(\\.[a-z]+)?|CMAKE_LINK_STARTFILE-NOTFOUND|([^/\\]+-)?ld|collect2)[^/\\]*( |$)]
+        linker tool regex: [^[ 	]*(->|")?[ 	]*(([^"]*[/\\])?(ld[0-9]*(\\.[a-z]+)?))("|,| |$)]
+        ignore line: [Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-Ii9uQJ']
+        ignore line: []
+        ignore line: [Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_1c87e]
+        ignore line: [[1/2] /usr/bin/c++   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp]
+        ignore line: [Using built-in specs.]
+        ignore line: [COLLECT_GCC=/usr/bin/c++]
+        ignore line: [Target: x86_64-pc-linux-gnu]
+        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
+        ignore line: [Thread model: posix]
+        ignore line: [Supported LTO compression algorithms: zlib zstd]
+        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/']
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1plus -quiet -v -D_GNU_SOURCE /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp -quiet -dumpdir CMakeFiles/cmTC_1c87e.dir/ -dumpbase CMakeCXXCompilerABI.cpp.cpp -dumpbase-ext .cpp -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/ccI2PFmy.s]
+        ignore line: [GNU C++17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)]
+        ignore line: [	compiled by GNU C version 14.2.1 20240910  GMP version 6.3.0  MPFR version 4.2.1  MPC version 1.3.1  isl version isl-0.27-GMP]
+        ignore line: []
+        ignore line: [GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072]
+        ignore line: [ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"]
+        ignore line: [#include "..." search starts here:]
+        ignore line: [#include <...> search starts here:]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+        ignore line: [ /usr/local/include]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+        ignore line: [ /usr/include]
+        ignore line: [End of search list.]
+        ignore line: [Compiler executable checksum: fce5a105c47978e141f61a441742cadf]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/']
+        ignore line: [ as -v --64 -o CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o /tmp/ccI2PFmy.s]
+        ignore line: [GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0]
+        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
+        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.']
+        ignore line: [[2/2] : && /usr/bin/c++  -v -Wl -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -o cmTC_1c87e   && :]
+        ignore line: [Using built-in specs.]
+        ignore line: [COLLECT_GCC=/usr/bin/c++]
+        ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper]
+        ignore line: [Target: x86_64-pc-linux-gnu]
+        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
+        ignore line: [Thread model: posix]
+        ignore line: [Supported LTO compression algorithms: zlib zstd]
+        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
+        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
+        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
+        ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_1c87e' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_1c87e.']
+        link line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cczdPYYx.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_1c87e /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2] ==> ignore
+          arg [-plugin] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so] ==> ignore
+          arg [-plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper] ==> ignore
+          arg [-plugin-opt=-fresolution=/tmp/cczdPYYx.res] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
+          arg [--build-id] ==> ignore
+          arg [--eh-frame-hdr] ==> ignore
+          arg [--hash-style=gnu] ==> ignore
+          arg [-m] ==> ignore
+          arg [elf_x86_64] ==> ignore
+          arg [-dynamic-linker] ==> ignore
+          arg [/lib64/ld-linux-x86-64.so.2] ==> ignore
+          arg [-pie] ==> ignore
+          arg [-o] ==> ignore
+          arg [cmTC_1c87e] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib]
+          arg [-L/lib/../lib] ==> dir [/lib/../lib]
+          arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..]
+          arg [-v] ==> ignore
+          arg [CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o] ==> ignore
+          arg [-lstdc++] ==> lib [stdc++]
+          arg [-lm] ==> lib [m]
+          arg [-lgcc_s] ==> lib [gcc_s]
+          arg [-lgcc] ==> lib [gcc]
+          arg [-lc] ==> lib [c]
+          arg [-lgcc_s] ==> lib [gcc_s]
+          arg [-lgcc] ==> lib [gcc]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+        ignore line: [collect2 version 14.2.1 20240910]
+        ignore line: [/usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cczdPYYx.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_1c87e /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+        linker tool for 'CXX': /usr/bin/ld
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> [/usr/lib/Scrt1.o]
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> [/usr/lib/crti.o]
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> [/usr/lib/crtn.o]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> [/usr/lib]
+        collapse library dir [/lib/../lib] ==> [/lib]
+        collapse library dir [/usr/lib/../lib] ==> [/usr/lib]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> [/usr/lib]
+        implicit libs: [stdc++;m;gcc_s;gcc;c;gcc_s;gcc]
+        implicit objs: [/usr/lib/Scrt1.o;/usr/lib/crti.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o;/usr/lib/crtn.o]
+        implicit dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib]
+        implicit fwks: []
+      
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CMakeDetermineLinkerId.cmake:40 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:255 (cmake_determine_linker_id)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Running the CXX compiler's linker: "/usr/bin/ld" "-v"
+      GNU ld (GNU Binutils) 2.43.0
+  -
+    kind: "try_compile-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CheckSourceCompiles.cmake:101 (try_compile)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CheckCSourceCompiles.cmake:52 (cmake_check_source_compiles)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/FindThreads.cmake:97 (CHECK_C_SOURCE_COMPILES)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/FindThreads.cmake:163 (_threads_check_libc)"
+      - "CMakeLists.txt:235 (find_package)"
+    checks:
+      - "Performing Test CMAKE_HAVE_LIBC_PTHREAD"
+    directories:
+      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-AqF7mh"
+      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-AqF7mh"
+    cmakeVariables:
+      CMAKE_C_FLAGS: ""
+      CMAKE_C_FLAGS_DEBUG: "-g"
+      CMAKE_EXE_LINKER_FLAGS: ""
+      CMAKE_MODULE_PATH: "/home/scarjit/Git/OrcaSlicer/cmake/modules/"
+      CMAKE_POSITION_INDEPENDENT_CODE: "ON"
+    buildResult:
+      variable: "CMAKE_HAVE_LIBC_PTHREAD"
+      cached: true
+      stdout: |
+        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-AqF7mh'
+        
+        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_55d55
+        [1/2] /usr/bin/cc -DCMAKE_HAVE_LIBC_PTHREAD  -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_55d55.dir/src.c.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-AqF7mh/src.c
+        [2/2] : && /usr/bin/cc   CMakeFiles/cmTC_55d55.dir/src.c.o -o cmTC_55d55   && :
+        
+      exitCode: 0
+  -
+    kind: "try_compile-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CheckIncludeFileCXX.cmake:89 (try_compile)"
+      - "cmake/modules/Findcereal.cmake:17 (CHECK_INCLUDE_FILE_CXX)"
+      - "CMakeLists.txt:544 (find_package)"
+    checks:
+      - "Looking for C++ include cereal/cereal.hpp"
+    directories:
+      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7"
+      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7"
+    cmakeVariables:
+      CMAKE_CXX_FLAGS: " -fext-numeric-literals -Wall -Wno-reorder"
+      CMAKE_CXX_FLAGS_DEBUG: "-g"
+      CMAKE_EXE_LINKER_FLAGS: ""
+      CMAKE_MODULE_PATH: "/home/scarjit/Git/OrcaSlicer/cmake/modules/"
+      CMAKE_POSITION_INDEPENDENT_CODE: "ON"
+    buildResult:
+      variable: "HAVE_CEREAL_H"
+      cached: true
+      stdout: |
+        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7'
+        
+        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_d484c
+        [1/2] /usr/bin/c++   -fext-numeric-literals -Wall -Wno-reorder  -std=gnu++17 -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_d484c.dir/CheckIncludeFile.cxx.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7/CheckIncludeFile.cxx
+        FAILED: CMakeFiles/cmTC_d484c.dir/CheckIncludeFile.cxx.o 
+        /usr/bin/c++   -fext-numeric-literals -Wall -Wno-reorder  -std=gnu++17 -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_d484c.dir/CheckIncludeFile.cxx.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7/CheckIncludeFile.cxx
+        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7/CheckIncludeFile.cxx:1:10: fatal error: cereal/cereal.hpp: No such file or directory
+            1 | #include <cereal/cereal.hpp>
+              |          ^~~~~~~~~~~~~~~~~~~
+        compilation terminated.
+        ninja: build stopped: subcommand failed.
+        
+      exitCode: 1
+...
diff --git a/cmake-build-debug/CMakeFiles/clion-Debug-log.txt b/cmake-build-debug/CMakeFiles/clion-Debug-log.txt
new file mode 100644
index 00000000000..380b8a715f2
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/clion-Debug-log.txt
@@ -0,0 +1,66 @@
+/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake -DCMAKE_BUILD_TYPE=Debug -DCMAKE_MAKE_PROGRAM=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -G Ninja -S /home/scarjit/Git/OrcaSlicer -B /home/scarjit/Git/OrcaSlicer/cmake-build-debug
+-- The C compiler identification is GNU 14.2.1
+-- The CXX compiler identification is GNU 14.2.1
+-- Detecting C compiler ABI info
+-- Detecting C compiler ABI info - done
+-- Check for working C compiler: /usr/bin/cc - skipped
+-- Detecting C compile features
+-- Detecting C compile features - done
+-- Detecting CXX compiler ABI info
+-- Detecting CXX compiler ABI info - done
+-- Check for working CXX compiler: /usr/bin/c++ - skipped
+-- Detecting CXX compile features
+-- Detecting CXX compile features - done
+-- SLIC3R_ASAN: OFF
+-- SLIC3R_BUILD_SANDBOXES: OFF
+-- SLIC3R_BUILD_TESTS: OFF
+-- SLIC3R_DESKTOP_INTEGRATION: ON
+-- SLIC3R_FHS: OFF
+-- SLIC3R_GTK: 2
+-- SLIC3R_GUI: ON
+-- SLIC3R_MSVC_COMPILE_PARALLEL: ON
+-- SLIC3R_MSVC_PDB: ON
+-- SLIC3R_PCH: ON
+-- SLIC3R_PERL_XS: OFF
+-- SLIC3R_PROFILE: OFF
+-- SLIC3R_STATIC: OFF
+-- SLIC3R_WX_STABLE: OFF
+-- SLIC3R_STATIC: OFF
+-- CMAKE_PREFIX_PATH: (default)
+-- PROJECT_SOURCE_DIR: /home/scarjit/Git/OrcaSlicer
+-- CMAKE_MODULE_PATH: /home/scarjit/Git/OrcaSlicer/cmake/modules/
+-- Found PkgConfig: /usr/bin/pkg-config (found version "2.1.1")
+-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
+-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
+-- Found Threads: TRUE
+-- Found DBus: /usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
+-- LIBDIR: /home/scarjit/Git/OrcaSlicer/src
+-- LIBDIR_BIN: /home/scarjit/Git/OrcaSlicer/cmake-build-debug/src
+CMake Warning (dev) at CMakeLists.txt:415 (find_package):
+  Policy CMP0167 is not set: The FindBoost module is removed.  Run "cmake
+  --help-policy CMP0167" for policy details.  Use the cmake_policy command to
+  set the policy and suppress this warning.
+
+This warning is for project developers.  Use -Wno-dev to suppress it.
+
+-- Found Boost: /usr/lib/cmake/Boost-1.86.0/BoostConfig.cmake (found suitable version "1.86.0", minimum required is "1.66") found components: system filesystem thread log locale regex chrono atomic date_time iostreams program_options
+-- TBB found in /usr/lib/cmake/TBB
+-- Found OpenSSL: /usr/lib/libcrypto.so (found version "3.4.0")
+-- Found CURL: /usr/lib/libcurl.so (found version "8.11.0") 
+-- Found ZLIB: /usr/lib/libz.so (found version "1.3.1")
+-- Could NOT find Eigen3 (missing: EIGEN3_INCLUDE_DIR EIGEN3_VERSION_OK) (Required is at least version "3.3")
+-- Found EXPAT: /usr/lib/libexpat.so (found version "2.6.4")
+-- Found PNG: /usr/lib/libpng.so (found version "1.6.44")
+-- Found OpenGL: /usr/lib/libOpenGL.so
+GLEW_ROOT: 
+-- Found GLEW: /usr/include (found version "2.2.0")
+-- Could NOT find cereal (missing: cereal_DIR)
+-- Looking for C++ include cereal/cereal.hpp
+-- Looking for C++ include cereal/cereal.hpp - not found
+CMake Error at cmake/modules/Findcereal.cmake:21 (message):
+  Cereal library not found.  Please install the dependency.
+Call Stack (most recent call first):
+  CMakeLists.txt:544 (find_package)
+
+
+-- Configuring incomplete, errors occurred!
diff --git a/cmake-build-debug/CMakeFiles/clion-environment.txt b/cmake-build-debug/CMakeFiles/clion-environment.txt
new file mode 100644
index 00000000000..292290e6b02
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/clion-environment.txt
@@ -0,0 +1,4 @@
+ToolSet: 1.0 (local)Ninja: 1.12.1@/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
+Options: 
+
+Options:-DCMAKE_MAKE_PROGRAM=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
\ No newline at end of file
diff --git a/cmake-build-debug/CMakeFiles/cmake.check_cache b/cmake-build-debug/CMakeFiles/cmake.check_cache
new file mode 100644
index 00000000000..3dccd731726
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/cmake.check_cache
@@ -0,0 +1 @@
+# This file is generated by cmake for dependency checking of the CMakeCache.txt file
diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json
index 7da1749debc..c8fdc74220b 100644
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -1,7 +1,7 @@
 {
     "name": "Bambulab",
     "url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-    "version": "01.09.00.23",
+    "version": "01.10.00.26",
     "force_update": "0",
     "description": "the initial version of BBL configurations",
     "machine_model_list": [
@@ -673,10 +673,6 @@
             "name": "fdm_filament_bvoh",
             "sub_path": "filament/fdm_filament_bvoh.json"
         },
-        {
-          "name": "fdm_filament_sbs",
-          "sub_path": "filament/fdm_filament_sbs.json"
-        },
         {
             "name": "Bambu PLA Matte @base",
             "sub_path": "filament/Bambu PLA Matte @base.json"
@@ -737,10 +733,6 @@
             "name": "Generic PLA-CF @base",
             "sub_path": "filament/Generic PLA-CF @base.json"
         },
-        {
-          "name": "Generic SBS @base",
-          "sub_path": "filament/Generic SBS @base.json"
-        },
         {
             "name": "Bambu PLA-CF @base",
             "sub_path": "filament/Bambu PLA-CF @base.json"
@@ -797,6 +789,14 @@
             "name": "Bambu TPU 95A HF @base",
             "sub_path": "filament/Bambu TPU 95A HF @base.json"
         },
+        {
+            "name": "Generic TPU for AMS @base",
+            "sub_path": "filament/Generic TPU for AMS @base.json"
+        },
+        {
+            "name": "Bambu TPU for AMS @base",
+            "sub_path": "filament/Bambu TPU for AMS @base.json"
+        },
         {
             "name": "Bambu PETG Basic @base",
             "sub_path": "filament/Bambu PETG Basic @base.json"
@@ -833,6 +833,22 @@
             "name": "Bambu PETG HF @base",
             "sub_path": "filament/Bambu PETG HF @base.json"
         },
+        {
+            "name": "Fiberon PETG-ESD @base",
+            "sub_path": "filament/Fiberon PETG-ESD @base.json"
+        },
+        {
+            "name": "Fiberon PETG-rCF @base",
+            "sub_path": "filament/Fiberon PETG-rCF @base.json"
+        },
+        {
+            "name": "Fiberon PET-CF @base",
+            "sub_path": "filament/Fiberon PET-CF @base.json"
+        },
+        {
+            "name": "Generic PETG HF @base",
+            "sub_path": "filament/Generic PETG HF @base.json"
+        },
         {
             "name": "Bambu ABS @base",
             "sub_path": "filament/Bambu ABS @base.json"
@@ -877,6 +893,10 @@
             "name": "Bambu ASA-Aero @base",
             "sub_path": "filament/Bambu ASA-Aero @base.json"
         },
+        {
+            "name": "Bambu ASA-CF @base",
+            "sub_path": "filament/Bambu ASA-CF @base.json"
+        },
         {
             "name": "Generic PVA @base",
             "sub_path": "filament/Generic PVA @base.json"
@@ -925,6 +945,22 @@
             "name": "Bambu PA6-GF @base",
             "sub_path": "filament/Bambu PA6-GF @base.json"
         },
+        {
+            "name": "Fiberon PA6-CF @base",
+            "sub_path": "filament/Fiberon PA6-CF @base.json"
+        },
+        {
+            "name": "Fiberon PA6-GF @base",
+            "sub_path": "filament/Fiberon PA6-GF @base.json"
+        },
+        {
+            "name": "Fiberon PA12-CF @base",
+            "sub_path": "filament/Fiberon PA12-CF @base.json"
+        },
+        {
+            "name": "Fiberon PA612-CF @base",
+            "sub_path": "filament/Fiberon PA612-CF @base.json"
+        },
         {
             "name": "Generic HIPS @base",
             "sub_path": "filament/Generic HIPS @base.json"
@@ -1405,10 +1441,6 @@
             "name": "Generic PLA-CF @BBL A1",
             "sub_path": "filament/Generic PLA-CF @BBL A1.json"
         },
-        {
-          "name": "Generic SBS",
-          "sub_path": "filament/Generic SBS.json"
-        },
         {
             "name": "Bambu PLA-CF @BBL X1C 0.8 nozzle",
             "sub_path": "filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json"
@@ -1745,6 +1777,38 @@
             "name": "Bambu TPU 95A HF @BBL A1",
             "sub_path": "filament/Bambu TPU 95A HF @BBL A1.json"
         },
+        {
+            "name": "Generic TPU for AMS @BBL X1C",
+            "sub_path": "filament/Generic TPU for AMS @BBL X1C.json"
+        },
+        {
+            "name": "Generic TPU for AMS @BBL P1P",
+            "sub_path": "filament/Generic TPU for AMS @BBL P1P.json"
+        },
+        {
+            "name": "Generic TPU for AMS @BBL A1",
+            "sub_path": "filament/Generic TPU for AMS @BBL A1.json"
+        },
+        {
+            "name": "Generic TPU for AMS @BBL A1M",
+            "sub_path": "filament/Generic TPU for AMS @BBL A1M.json"
+        },
+        {
+            "name": "Bambu TPU for AMS @BBL X1C",
+            "sub_path": "filament/Bambu TPU for AMS @BBL X1C.json"
+        },
+        {
+            "name": "Bambu TPU for AMS @BBL P1P",
+            "sub_path": "filament/Bambu TPU for AMS @BBL P1P.json"
+        },
+        {
+            "name": "Bambu TPU for AMS @BBL A1",
+            "sub_path": "filament/Bambu TPU for AMS @BBL A1.json"
+        },
+        {
+            "name": "Bambu TPU for AMS @BBL A1M",
+            "sub_path": "filament/Bambu TPU for AMS @BBL A1M.json"
+        },
         {
             "name": "Bambu PETG Basic @BBL X1C",
             "sub_path": "filament/Bambu PETG Basic @BBL X1C.json"
@@ -1945,6 +2009,50 @@
             "name": "Generic PCTG @BBL A1M",
             "sub_path": "filament/Generic PCTG @BBL A1M.json"
         },
+        {
+            "name": "Fiberon PETG-ESD @BBL X1C",
+            "sub_path": "filament/Fiberon PETG-ESD @BBL X1C.json"
+        },
+        {
+            "name": "Fiberon PETG-rCF @BBL X1C",
+            "sub_path": "filament/Fiberon PETG-rCF @BBL X1C.json"
+        },
+        {
+            "name": "Fiberon PET-CF @BBL X1C",
+            "sub_path": "filament/Fiberon PET-CF @BBL X1C.json"
+        },
+        {
+            "name": "Generic PETG HF @BBL X1C",
+            "sub_path": "filament/Generic PETG HF @BBL X1C.json"
+        },
+        {
+            "name": "Generic PETG HF @BBL X1C 0.2 nozzle",
+            "sub_path": "filament/Generic PETG HF @BBL X1C 0.2 nozzle.json"
+        },
+        {
+            "name": "Generic PETG HF @BBL P1P",
+            "sub_path": "filament/Generic PETG HF @BBL P1P.json"
+        },
+        {
+            "name": "Generic PETG HF @BBL P1P 0.2 nozzle",
+            "sub_path": "filament/Generic PETG HF @BBL P1P 0.2 nozzle.json"
+        },
+        {
+            "name": "Generic PETG HF @BBL A1",
+            "sub_path": "filament/Generic PETG HF @BBL A1.json"
+        },
+        {
+            "name": "Generic PETG HF @BBL A1 0.2 nozzle",
+            "sub_path": "filament/Generic PETG HF @BBL A1 0.2 nozzle.json"
+        },
+        {
+            "name": "Generic PETG HF @BBL A1M",
+            "sub_path": "filament/Generic PETG HF @BBL A1M.json"
+        },
+        {
+            "name": "Generic PETG HF @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Generic PETG HF @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "Bambu ABS @BBL X1C",
             "sub_path": "filament/Bambu ABS @BBL X1C.json"
@@ -2173,6 +2281,30 @@
             "name": "Bambu ASA-Aero @BBL A1",
             "sub_path": "filament/Bambu ASA-Aero @BBL A1.json"
         },
+        {
+            "name": "Bambu ASA-CF @BBL X1C",
+            "sub_path": "filament/Bambu ASA-CF @BBL X1C.json"
+        },
+        {
+            "name": "Bambu ASA-CF @BBL X1C 0.6 nozzle",
+            "sub_path": "filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json"
+        },
+        {
+            "name": "Bambu ASA-CF @BBL P1P",
+            "sub_path": "filament/Bambu ASA-CF @BBL P1P.json"
+        },
+        {
+            "name": "Bambu ASA-CF @BBL P1P 0.6 nozzle",
+            "sub_path": "filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json"
+        },
+        {
+            "name": "Bambu ASA-CF @BBL A1",
+            "sub_path": "filament/Bambu ASA-CF @BBL A1.json"
+        },
+        {
+            "name": "Bambu ASA-CF @BBL A1 0.6 nozzle",
+            "sub_path": "filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json"
+        },
         {
             "name": "Generic PVA @0.2 nozzle",
             "sub_path": "filament/Generic PVA @0.2 nozzle.json"
@@ -2321,6 +2453,22 @@
             "name": "Bambu PA6-GF @BBL A1",
             "sub_path": "filament/Bambu PA6-GF @BBL A1.json"
         },
+        {
+            "name": "Fiberon PA6-CF @BBL X1C",
+            "sub_path": "filament/Fiberon PA6-CF @BBL X1C.json"
+        },
+        {
+            "name": "Fiberon PA6-GF @BBL X1C",
+            "sub_path": "filament/Fiberon PA6-GF @BBL X1C.json"
+        },
+        {
+            "name": "Fiberon PA12-CF @BBL X1C",
+            "sub_path": "filament/Fiberon PA12-CF @BBL X1C.json"
+        },
+        {
+            "name": "Fiberon PA612-CF @BBL X1C",
+            "sub_path": "filament/Fiberon PA612-CF @BBL X1C.json"
+        },
         {
             "name": "Generic HIPS @BBL X1C",
             "sub_path": "filament/Generic HIPS @BBL X1C.json"

From 9cf92aa28fd7589d8c1bf487340aafde4f5e2535 Mon Sep 17 00:00:00 2001
From: Ferdinand Linnenberg <ferdinand@linnenberg.dev>
Date: Sat, 7 Dec 2024 11:56:10 +0100
Subject: [PATCH 3/8] fix: remove cmake-build-debug, idea

---
 .idea/.gitignore                              |   8 -
 .idea/OrcaSlicer.iml                          |   2 -
 .idea/codeStyles/Project.xml                  | 106 --
 .idea/codeStyles/codeStyleConfig.xml          |   5 -
 .idea/misc.xml                                |   7 -
 .idea/modules.xml                             |   8 -
 .idea/vcs.xml                                 |   6 -
 .../.cmake/api/v1/query/cache-v2              |   0
 .../.cmake/api/v1/query/cmakeFiles-v1         |   0
 .../.cmake/api/v1/query/codemodel-v2          |   0
 .../.cmake/api/v1/query/toolchains-v1         |   0
 cmake-build-debug/CMakeCache.txt              | 957 ------------------
 .../CMakeFiles/3.30.5/CMakeCCompiler.cmake    |  81 --
 .../CMakeFiles/3.30.5/CMakeCXXCompiler.cmake  | 105 --
 .../3.30.5/CMakeDetermineCompilerABI_C.bin    | Bin 15448 -> 0 bytes
 .../3.30.5/CMakeDetermineCompilerABI_CXX.bin  | Bin 15464 -> 0 bytes
 .../CMakeFiles/3.30.5/CMakeSystem.cmake       |  15 -
 .../3.30.5/CompilerIdC/CMakeCCompilerId.c     | 904 -----------------
 .../CMakeFiles/3.30.5/CompilerIdC/a.out       | Bin 15560 -> 0 bytes
 .../CompilerIdCXX/CMakeCXXCompilerId.cpp      | 919 -----------------
 .../CMakeFiles/3.30.5/CompilerIdCXX/a.out     | Bin 15576 -> 0 bytes
 .../CMakeFiles/CMakeConfigureLog.yaml         | 562 ----------
 .../CMakeFiles/clion-Debug-log.txt            |  66 --
 .../CMakeFiles/clion-environment.txt          |   4 -
 .../CMakeFiles/cmake.check_cache              |   1 -
 25 files changed, 3756 deletions(-)
 delete mode 100644 .idea/.gitignore
 delete mode 100644 .idea/OrcaSlicer.iml
 delete mode 100644 .idea/codeStyles/Project.xml
 delete mode 100644 .idea/codeStyles/codeStyleConfig.xml
 delete mode 100644 .idea/misc.xml
 delete mode 100644 .idea/modules.xml
 delete mode 100644 .idea/vcs.xml
 delete mode 100644 cmake-build-debug/.cmake/api/v1/query/cache-v2
 delete mode 100644 cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1
 delete mode 100644 cmake-build-debug/.cmake/api/v1/query/codemodel-v2
 delete mode 100644 cmake-build-debug/.cmake/api/v1/query/toolchains-v1
 delete mode 100644 cmake-build-debug/CMakeCache.txt
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
 delete mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin
 delete mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
 delete mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
 delete mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
 delete mode 100644 cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
 delete mode 100644 cmake-build-debug/CMakeFiles/clion-Debug-log.txt
 delete mode 100644 cmake-build-debug/CMakeFiles/clion-environment.txt
 delete mode 100644 cmake-build-debug/CMakeFiles/cmake.check_cache

diff --git a/.idea/.gitignore b/.idea/.gitignore
deleted file mode 100644
index 13566b81b01..00000000000
--- a/.idea/.gitignore
+++ /dev/null
@@ -1,8 +0,0 @@
-# Default ignored files
-/shelf/
-/workspace.xml
-# Editor-based HTTP Client requests
-/httpRequests/
-# Datasource local storage ignored files
-/dataSources/
-/dataSources.local.xml
diff --git a/.idea/OrcaSlicer.iml b/.idea/OrcaSlicer.iml
deleted file mode 100644
index f08604bb65b..00000000000
--- a/.idea/OrcaSlicer.iml
+++ /dev/null
@@ -1,2 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<module classpath="CMake" type="CPP_MODULE" version="4" />
\ No newline at end of file
diff --git a/.idea/codeStyles/Project.xml b/.idea/codeStyles/Project.xml
deleted file mode 100644
index 53162672047..00000000000
--- a/.idea/codeStyles/Project.xml
+++ /dev/null
@@ -1,106 +0,0 @@
-<component name="ProjectCodeStyleConfiguration">
-  <code_scheme name="Project" version="173">
-    <RiderCodeStyleSettings>
-      <option name="/Default/CodeStyle/CodeFormatting/CppClangFormat/EnableClangFormatSupport/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/EditorConfig/EnableClangFormatSupport/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_BINARY_EXPRESSIONS_CHAIN/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_CALLS_CHAIN/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_EXPRESSION/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_FOR_STMT/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTIPLE_DECLARATION/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_TERNARY/@EntryValue" value="ALIGN_ALL" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_CLASS_DEFINITION/@EntryValue" value="1" type="int" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/KEEP_BLANK_LINES_IN_DECLARATIONS/@EntryValue" value="2" type="int" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/KEEP_BLANK_LINES_IN_CODE/@EntryValue" value="2" type="int" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/KEEP_USER_LINEBREAKS/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_CASE_FROM_SWITCH/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_COMMENT/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INT_ALIGN_EQ/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SIMPLE_BLOCK_STYLE/@EntryValue" value="DO_NOT_CHANGE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_COMMA_IN_TEMPLATE_ARGS/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_COMMA_IN_TEMPLATE_PARAMS/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_FOR_SEMICOLON/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_FOR_SEMICOLON/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_UNARY_OPERATOR/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_ARRAY_ACCESS_BRACKETS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_CAST_EXPRESSION_PARENTHESES/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_INITIALIZER_BRACES/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_METHOD_PARENTHESES/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_INITIALIZER_BRACES/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPECIAL_ELSE_IF_TREATMENT/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_CAST_EXPRESSION_PARENTHESES/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_AFTER_BINARY_OPSIGN/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_TERNARY_OPSIGNS/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/TYPE_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/OTHER_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/CASE_BLOCK_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_FUNCTION_DECLARATION/@EntryValue" value="1" type="int" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_FUNCTION_DEFINITION/@EntryValue" value="1" type="int" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_WHILE_ON_NEW_LINE/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_ELSE_ON_NEW_LINE/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_CATCH_ON_NEW_LINE/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/NAMESPACE_INDENTATION/@EntryValue" value="All" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_ARGUMENT/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_EXTENDS_LIST/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_PARAMETER/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_TYPE_ARGUMENT/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_TYPE_PARAMETER/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_DECLARATIONS/@EntryValue" value="0" type="int" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_ACCESS_SPECIFIERS_FROM_CLASS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_CLASS_MEMBERS_FROM_ACCESS_SPECIFIERS/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/LINE_BREAK_AFTER_COLON_IN_MEMBER_INITIALIZER_LISTS/@EntryValue" value="ON_SINGLE_LINE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/MEMBER_INITIALIZER_LIST_STYLE/@EntryValue" value="DO_NOT_CHANGE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_NAMESPACE_DEFINITIONS_ON_SAME_LINE/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_COLON_IN_BITFIELD_DECLARATOR/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_COLON_IN_BITFIELD_DECLARATOR/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_EXTENDS_COLON/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_EXTENDS_COLON/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_FOR_COLON/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_FOR_COLON/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_DATA_MEMBER/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_DATA_MEMBERS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_METHOD/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_NESTED_DECLARATOR/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_REF_IN_DATA_MEMBER/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_REF_IN_DATA_MEMBERS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_REF_IN_METHOD/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_ABSTRACT_DECL/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_DATA_MEMBER/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_DATA_MEMBERS/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_METHOD/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_ABSTRACT_DECL/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_DATA_MEMBER/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_DATA_MEMBERS/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_METHOD/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_TEMPLATE_ARGS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_TEMPLATE_PARAMS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BETWEEN_CLOSING_ANGLE_BRACKETS_IN_TEMPLATE_ARGS/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_TEMPLATE_PARAMS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_TEMPLATE_ARGS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_TEMPLATE_PARAMS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_DECLARATION_PARENTHESES/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_BLOCKS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_INVOCATION_LPAR/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_AFTER_INVOCATION_LPAR/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_INVOCATION_RPAR/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_DECLARATION_LPAR/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_AFTER_DECLARATION_LPAR/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_DECLARATION_RPAR/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_ARGUMENTS_STYLE/@EntryValue" value="WRAP_IF_LONG" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_PARAMETERS_STYLE/@EntryValue" value="WRAP_IF_LONG" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BREAK_TEMPLATE_DECLARATION/@EntryValue" value="LINE_BREAK" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/NAMESPACE_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/FREE_BLOCK_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INVOCABLE_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ANONYMOUS_METHOD_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INITIALIZER_BRACES/@EntryValue" value="END_OF_LINE_NO_SPACE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_STYLE/@EntryValue" value="Space" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_SIZE/@EntryValue" value="4" type="int" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/CONTINUOUS_LINE_INDENT/@EntryValue" value="Double" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/TAB_WIDTH/@EntryValue" value="4" type="int" />
-    </RiderCodeStyleSettings>
-    <clangFormatSettings>
-      <option name="ENABLED" value="true" />
-    </clangFormatSettings>
-  </code_scheme>
-</component>
\ No newline at end of file
diff --git a/.idea/codeStyles/codeStyleConfig.xml b/.idea/codeStyles/codeStyleConfig.xml
deleted file mode 100644
index 79ee123c2b2..00000000000
--- a/.idea/codeStyles/codeStyleConfig.xml
+++ /dev/null
@@ -1,5 +0,0 @@
-<component name="ProjectCodeStyleConfiguration">
-  <state>
-    <option name="USE_PER_PROJECT_SETTINGS" value="true" />
-  </state>
-</component>
\ No newline at end of file
diff --git a/.idea/misc.xml b/.idea/misc.xml
deleted file mode 100644
index 0b76fe5109e..00000000000
--- a/.idea/misc.xml
+++ /dev/null
@@ -1,7 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project version="4">
-  <component name="CMakePythonSetting">
-    <option name="pythonIntegrationState" value="YES" />
-  </component>
-  <component name="CMakeWorkspace" PROJECT_DIR="$PROJECT_DIR$" />
-</project>
\ No newline at end of file
diff --git a/.idea/modules.xml b/.idea/modules.xml
deleted file mode 100644
index b80725f1d91..00000000000
--- a/.idea/modules.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project version="4">
-  <component name="ProjectModuleManager">
-    <modules>
-      <module fileurl="file://$PROJECT_DIR$/.idea/OrcaSlicer.iml" filepath="$PROJECT_DIR$/.idea/OrcaSlicer.iml" />
-    </modules>
-  </component>
-</project>
\ No newline at end of file
diff --git a/.idea/vcs.xml b/.idea/vcs.xml
deleted file mode 100644
index 35eb1ddfbbc..00000000000
--- a/.idea/vcs.xml
+++ /dev/null
@@ -1,6 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project version="4">
-  <component name="VcsDirectoryMappings">
-    <mapping directory="" vcs="Git" />
-  </component>
-</project>
\ No newline at end of file
diff --git a/cmake-build-debug/.cmake/api/v1/query/cache-v2 b/cmake-build-debug/.cmake/api/v1/query/cache-v2
deleted file mode 100644
index e69de29bb2d..00000000000
diff --git a/cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1 b/cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1
deleted file mode 100644
index e69de29bb2d..00000000000
diff --git a/cmake-build-debug/.cmake/api/v1/query/codemodel-v2 b/cmake-build-debug/.cmake/api/v1/query/codemodel-v2
deleted file mode 100644
index e69de29bb2d..00000000000
diff --git a/cmake-build-debug/.cmake/api/v1/query/toolchains-v1 b/cmake-build-debug/.cmake/api/v1/query/toolchains-v1
deleted file mode 100644
index e69de29bb2d..00000000000
diff --git a/cmake-build-debug/CMakeCache.txt b/cmake-build-debug/CMakeCache.txt
deleted file mode 100644
index 6a1c377b37b..00000000000
--- a/cmake-build-debug/CMakeCache.txt
+++ /dev/null
@@ -1,957 +0,0 @@
-# This is the CMakeCache file.
-# For build in directory: /home/scarjit/Git/OrcaSlicer/cmake-build-debug
-# It was generated by CMake: /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake
-# You can edit this file to change values found and used by cmake.
-# If you do not want to change any of the values, simply exit the editor.
-# If you do want to change a value, simply edit, save, and exit the editor.
-# The syntax for the file is as follows:
-# KEY:TYPE=VALUE
-# KEY is the name of a variable in the cache.
-# TYPE is a hint to GUIs for the type of VALUE, DO NOT EDIT TYPE!.
-# VALUE is the current value for the KEY.
-
-########################
-# EXTERNAL cache entries
-########################
-
-Boost_ATOMIC_LIBRARY_RELEASE:STRING=/usr/lib/libboost_atomic.so.1.86.0
-
-Boost_CHRONO_LIBRARY_RELEASE:STRING=/usr/lib/libboost_chrono.so.1.86.0
-
-Boost_DATE_TIME_LIBRARY_RELEASE:STRING=/usr/lib/libboost_date_time.so.1.86.0
-
-//The directory containing a CMake configuration file for Boost.
-Boost_DIR:PATH=/usr/lib/cmake/Boost-1.86.0
-
-Boost_FILESYSTEM_LIBRARY_RELEASE:STRING=/usr/lib/libboost_filesystem.so.1.86.0
-
-//Path to a file.
-Boost_INCLUDE_DIR:PATH=/usr/include
-
-Boost_IOSTREAMS_LIBRARY_RELEASE:STRING=/usr/lib/libboost_iostreams.so.1.86.0
-
-Boost_LOCALE_LIBRARY_RELEASE:STRING=/usr/lib/libboost_locale.so.1.86.0
-
-Boost_LOG_LIBRARY_RELEASE:STRING=/usr/lib/libboost_log.so.1.86.0
-
-Boost_PROGRAM_OPTIONS_LIBRARY_RELEASE:STRING=/usr/lib/libboost_program_options.so.1.86.0
-
-Boost_REGEX_LIBRARY_RELEASE:STRING=/usr/lib/libboost_regex.so.1.86.0
-
-Boost_SYSTEM_LIBRARY_RELEASE:STRING=/usr/lib/libboost_system.so.1.86.0
-
-Boost_THREAD_LIBRARY_RELEASE:STRING=/usr/lib/libboost_thread.so.1.86.0
-
-//Path to a program.
-CMAKE_ADDR2LINE:FILEPATH=/usr/bin/addr2line
-
-//Path to a program.
-CMAKE_AR:FILEPATH=/usr/bin/ar
-
-//Choose the type of build, options are: None Debug Release RelWithDebInfo
-// MinSizeRel ...
-CMAKE_BUILD_TYPE:STRING=Debug
-
-//Enable colored diagnostics throughout.
-CMAKE_COLOR_DIAGNOSTICS:BOOL=ON
-
-//CXX compiler
-CMAKE_CXX_COMPILER:FILEPATH=/usr/bin/c++
-
-//A wrapper around 'ar' adding the appropriate '--plugin' option
-// for the GCC compiler
-CMAKE_CXX_COMPILER_AR:FILEPATH=/usr/bin/gcc-ar
-
-//A wrapper around 'ranlib' adding the appropriate '--plugin' option
-// for the GCC compiler
-CMAKE_CXX_COMPILER_RANLIB:FILEPATH=/usr/bin/gcc-ranlib
-
-//Flags used by the CXX compiler during all build types.
-CMAKE_CXX_FLAGS:STRING=
-
-//Flags used by the CXX compiler during DEBUG builds.
-CMAKE_CXX_FLAGS_DEBUG:STRING=-g
-
-//Flags used by the CXX compiler during MINSIZEREL builds.
-CMAKE_CXX_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG
-
-//Flags used by the CXX compiler during RELEASE builds.
-CMAKE_CXX_FLAGS_RELEASE:STRING=-O3 -DNDEBUG
-
-//Flags used by the CXX compiler during RELWITHDEBINFO builds.
-CMAKE_CXX_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG
-
-//C compiler
-CMAKE_C_COMPILER:FILEPATH=/usr/bin/cc
-
-//A wrapper around 'ar' adding the appropriate '--plugin' option
-// for the GCC compiler
-CMAKE_C_COMPILER_AR:FILEPATH=/usr/bin/gcc-ar
-
-//A wrapper around 'ranlib' adding the appropriate '--plugin' option
-// for the GCC compiler
-CMAKE_C_COMPILER_RANLIB:FILEPATH=/usr/bin/gcc-ranlib
-
-//Flags used by the C compiler during all build types.
-CMAKE_C_FLAGS:STRING=
-
-//Flags used by the C compiler during DEBUG builds.
-CMAKE_C_FLAGS_DEBUG:STRING=-g
-
-//Flags used by the C compiler during MINSIZEREL builds.
-CMAKE_C_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG
-
-//Flags used by the C compiler during RELEASE builds.
-CMAKE_C_FLAGS_RELEASE:STRING=-O3 -DNDEBUG
-
-//Flags used by the C compiler during RELWITHDEBINFO builds.
-CMAKE_C_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG
-
-//Path to a program.
-CMAKE_DLLTOOL:FILEPATH=CMAKE_DLLTOOL-NOTFOUND
-
-//Flags used by the linker during all build types.
-CMAKE_EXE_LINKER_FLAGS:STRING=
-
-//Flags used by the linker during DEBUG builds.
-CMAKE_EXE_LINKER_FLAGS_DEBUG:STRING=
-
-//Flags used by the linker during MINSIZEREL builds.
-CMAKE_EXE_LINKER_FLAGS_MINSIZEREL:STRING=
-
-//Flags used by the linker during RELEASE builds.
-CMAKE_EXE_LINKER_FLAGS_RELEASE:STRING=
-
-//Flags used by the linker during RELWITHDEBINFO builds.
-CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO:STRING=
-
-//Enable/Disable output of compile commands during generation.
-CMAKE_EXPORT_COMPILE_COMMANDS:BOOL=
-
-//Value Computed by CMake.
-CMAKE_FIND_PACKAGE_REDIRECTS_DIR:STATIC=/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/pkgRedirects
-
-//User executables (bin)
-CMAKE_INSTALL_BINDIR:PATH=bin
-
-//Read-only architecture-independent data (DATAROOTDIR)
-CMAKE_INSTALL_DATADIR:PATH=
-
-//Read-only architecture-independent data root (share)
-CMAKE_INSTALL_DATAROOTDIR:PATH=share
-
-//Documentation root (DATAROOTDIR/doc/PROJECT_NAME)
-CMAKE_INSTALL_DOCDIR:PATH=
-
-//C header files (include)
-CMAKE_INSTALL_INCLUDEDIR:PATH=include
-
-//Info documentation (DATAROOTDIR/info)
-CMAKE_INSTALL_INFODIR:PATH=
-
-//Object code libraries (lib)
-CMAKE_INSTALL_LIBDIR:PATH=lib
-
-//Program executables (libexec)
-CMAKE_INSTALL_LIBEXECDIR:PATH=libexec
-
-//Locale-dependent data (DATAROOTDIR/locale)
-CMAKE_INSTALL_LOCALEDIR:PATH=
-
-//Modifiable single-machine data (var)
-CMAKE_INSTALL_LOCALSTATEDIR:PATH=var
-
-//Man documentation (DATAROOTDIR/man)
-CMAKE_INSTALL_MANDIR:PATH=
-
-//C header files for non-gcc (/usr/include)
-CMAKE_INSTALL_OLDINCLUDEDIR:PATH=/usr/include
-
-//Install path prefix, prepended onto install directories.
-CMAKE_INSTALL_PREFIX:PATH=/usr/local
-
-//Run-time variable data (LOCALSTATEDIR/run)
-CMAKE_INSTALL_RUNSTATEDIR:PATH=
-
-//System admin executables (sbin)
-CMAKE_INSTALL_SBINDIR:PATH=sbin
-
-//Modifiable architecture-independent data (com)
-CMAKE_INSTALL_SHAREDSTATEDIR:PATH=com
-
-//Read-only single-machine data (etc)
-CMAKE_INSTALL_SYSCONFDIR:PATH=etc
-
-//Path to a program.
-CMAKE_LINKER:FILEPATH=/usr/bin/ld
-
-//No help, variable specified on the command line.
-CMAKE_MAKE_PROGRAM:UNINITIALIZED=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
-
-//Flags used by the linker during the creation of modules during
-// all build types.
-CMAKE_MODULE_LINKER_FLAGS:STRING=
-
-//Flags used by the linker during the creation of modules during
-// DEBUG builds.
-CMAKE_MODULE_LINKER_FLAGS_DEBUG:STRING=
-
-//Flags used by the linker during the creation of modules during
-// MINSIZEREL builds.
-CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL:STRING=
-
-//Flags used by the linker during the creation of modules during
-// RELEASE builds.
-CMAKE_MODULE_LINKER_FLAGS_RELEASE:STRING=
-
-//Flags used by the linker during the creation of modules during
-// RELWITHDEBINFO builds.
-CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO:STRING=
-
-//Path to a program.
-CMAKE_NM:FILEPATH=/usr/bin/nm
-
-//Path to a program.
-CMAKE_OBJCOPY:FILEPATH=/usr/bin/objcopy
-
-//Path to a program.
-CMAKE_OBJDUMP:FILEPATH=/usr/bin/objdump
-
-//Value Computed by CMake
-CMAKE_PROJECT_DESCRIPTION:STATIC=
-
-//Value Computed by CMake
-CMAKE_PROJECT_HOMEPAGE_URL:STATIC=
-
-//Value Computed by CMake
-CMAKE_PROJECT_NAME:STATIC=OrcaSlicer
-
-//Path to a program.
-CMAKE_RANLIB:FILEPATH=/usr/bin/ranlib
-
-//Path to a program.
-CMAKE_READELF:FILEPATH=/usr/bin/readelf
-
-//Flags used by the linker during the creation of shared libraries
-// during all build types.
-CMAKE_SHARED_LINKER_FLAGS:STRING=
-
-//Flags used by the linker during the creation of shared libraries
-// during DEBUG builds.
-CMAKE_SHARED_LINKER_FLAGS_DEBUG:STRING=
-
-//Flags used by the linker during the creation of shared libraries
-// during MINSIZEREL builds.
-CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL:STRING=
-
-//Flags used by the linker during the creation of shared libraries
-// during RELEASE builds.
-CMAKE_SHARED_LINKER_FLAGS_RELEASE:STRING=
-
-//Flags used by the linker during the creation of shared libraries
-// during RELWITHDEBINFO builds.
-CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO:STRING=
-
-//If set, runtime paths are not added when installing shared libraries,
-// but are added when building.
-CMAKE_SKIP_INSTALL_RPATH:BOOL=NO
-
-//If set, runtime paths are not added when using shared libraries.
-CMAKE_SKIP_RPATH:BOOL=NO
-
-//Flags used by the linker during the creation of static libraries
-// during all build types.
-CMAKE_STATIC_LINKER_FLAGS:STRING=
-
-//Flags used by the linker during the creation of static libraries
-// during DEBUG builds.
-CMAKE_STATIC_LINKER_FLAGS_DEBUG:STRING=
-
-//Flags used by the linker during the creation of static libraries
-// during MINSIZEREL builds.
-CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL:STRING=
-
-//Flags used by the linker during the creation of static libraries
-// during RELEASE builds.
-CMAKE_STATIC_LINKER_FLAGS_RELEASE:STRING=
-
-//Flags used by the linker during the creation of static libraries
-// during RELWITHDEBINFO builds.
-CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO:STRING=
-
-//Path to a program.
-CMAKE_STRIP:FILEPATH=/usr/bin/strip
-
-//Path to a program.
-CMAKE_TAPI:FILEPATH=CMAKE_TAPI-NOTFOUND
-
-//If this value is on, makefiles will be generated without the
-// .SILENT directive, and all commands will be echoed to the console
-// during the make.  This is useful for debugging only. With Visual
-// Studio IDE projects all commands are done without /nologo.
-CMAKE_VERBOSE_MAKEFILE:BOOL=FALSE
-
-//Path to a file.
-CURL_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-CURL_LIBRARY_DEBUG:FILEPATH=CURL_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-CURL_LIBRARY_RELEASE:FILEPATH=/usr/lib/libcurl.so
-
-//Path to a file.
-DBUS_ARCH_INCLUDE_DIR:PATH=/usr/lib/dbus-1.0/include
-
-//Path to a file.
-DBUS_INCLUDE_DIR:PATH=/usr/include/dbus-1.0
-
-//Path to a library.
-DBUS_LIBRARIES:FILEPATH=/usr/lib/libdbus-1.so
-
-//Path to a file.
-EIGEN3_INCLUDE_DIR:PATH=EIGEN3_INCLUDE_DIR-NOTFOUND
-
-//Path to a file.
-EXPAT_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-EXPAT_LIBRARY_DEBUG:FILEPATH=EXPAT_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-EXPAT_LIBRARY_RELEASE:FILEPATH=/usr/lib/libexpat.so
-
-//Path to a file.
-GLEW_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-GLEW_SHARED_LIBRARY_DEBUG:FILEPATH=GLEW_SHARED_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-GLEW_SHARED_LIBRARY_RELEASE:FILEPATH=/usr/lib/libGLEW.so
-
-//Path to a library.
-GLEW_STATIC_LIBRARY_DEBUG:FILEPATH=GLEW_STATIC_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-GLEW_STATIC_LIBRARY_RELEASE:FILEPATH=GLEW_STATIC_LIBRARY_RELEASE-NOTFOUND
-
-//Path to a file.
-OPENGL_EGL_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_GLES2_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_GLES3_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_GLU_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_GLX_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-OPENGL_egl_LIBRARY:FILEPATH=/usr/lib/libEGL.so
-
-//Path to a library.
-OPENGL_gl_LIBRARY:FILEPATH=/usr/lib/libGL.so
-
-//Path to a library.
-OPENGL_gles2_LIBRARY:FILEPATH=/usr/lib/libGLESv2.so
-
-//Path to a library.
-OPENGL_gles3_LIBRARY:FILEPATH=/usr/lib/libGLESv2.so
-
-//Path to a library.
-OPENGL_glu_LIBRARY:FILEPATH=/usr/lib/libGLU.so
-
-//Path to a library.
-OPENGL_glx_LIBRARY:FILEPATH=/usr/lib/libGLX.so
-
-//Path to a library.
-OPENGL_opengl_LIBRARY:FILEPATH=/usr/lib/libOpenGL.so
-
-//Path to a file.
-OPENGL_xmesa_INCLUDE_DIR:PATH=OPENGL_xmesa_INCLUDE_DIR-NOTFOUND
-
-//Path to a library.
-OPENSSL_CRYPTO_LIBRARY:FILEPATH=/usr/lib/libcrypto.so
-
-//Path to a file.
-OPENSSL_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-OPENSSL_SSL_LIBRARY:FILEPATH=/usr/lib/libssl.so
-
-//Path to OpenVDB installation's find modules.
-OPENVDB_FIND_MODULE_PATH:PATH=
-
-//Build Orca tools
-ORCA_TOOLS:BOOL=OFF
-
-//Value Computed by CMake
-OrcaSlicer_BINARY_DIR:STATIC=/home/scarjit/Git/OrcaSlicer/cmake-build-debug
-
-//Value Computed by CMake
-OrcaSlicer_IS_TOP_LEVEL:STATIC=ON
-
-//Value Computed by CMake
-OrcaSlicer_SOURCE_DIR:STATIC=/home/scarjit/Git/OrcaSlicer
-
-//Arguments to supply to pkg-config
-PKG_CONFIG_ARGN:STRING=
-
-//pkg-config executable
-PKG_CONFIG_EXECUTABLE:FILEPATH=/usr/bin/pkg-config
-
-//Path to a library.
-PNG_LIBRARY_DEBUG:FILEPATH=PNG_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-PNG_LIBRARY_RELEASE:FILEPATH=/usr/lib/libpng.so
-
-//Path to a file.
-PNG_PNG_INCLUDE_DIR:PATH=/usr/include
-
-//Enable ASan on Clang and GCC
-SLIC3R_ASAN:BOOL=OFF
-
-//Build development sandboxes
-SLIC3R_BUILD_SANDBOXES:BOOL=OFF
-
-//Build unit tests
-SLIC3R_BUILD_TESTS:BOOL=OFF
-
-//Allow perfoming desktop integration during runtime
-SLIC3R_DESKTOP_INTEGRATION:BOOL=ON
-
-//Assume OrcaSlicer is to be installed in a FHS directory structure
-SLIC3R_FHS:BOOL=OFF
-
-//GTK version to use with wxWidgets on Linux
-SLIC3R_GTK:STRING=2
-
-//Compile OrcaSlicer with GUI components (OpenGL, wxWidgets)
-SLIC3R_GUI:BOOL=ON
-
-//Compile on Visual Studio in parallel
-SLIC3R_MSVC_COMPILE_PARALLEL:BOOL=ON
-
-//Generate PDB files on MSVC in Release mode
-SLIC3R_MSVC_PDB:BOOL=ON
-
-//Use precompiled headers
-SLIC3R_PCH:BOOL=ON
-
-//Compile XS Perl module and enable Perl unit and integration tests
-SLIC3R_PERL_XS:BOOL=OFF
-
-//Compile OrcaSlicer with an invasive Shiny profiler
-SLIC3R_PROFILE:BOOL=OFF
-
-//Compile OrcaSlicer with static libraries (Boost, TBB, glew)
-SLIC3R_STATIC:BOOL=OFF
-
-//Build against wxWidgets stable (3.0) as oppsed to dev (3.1) on
-// Linux
-SLIC3R_WX_STABLE:BOOL=OFF
-
-//The directory containing a CMake configuration file for TBB.
-TBB_DIR:PATH=/usr/lib/cmake/TBB
-
-//Path to a file.
-ZLIB_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-ZLIB_LIBRARY_DEBUG:FILEPATH=ZLIB_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-ZLIB_LIBRARY_RELEASE:FILEPATH=/usr/lib/libz.so
-
-//The directory containing a CMake configuration file for boost_atomic.
-boost_atomic_DIR:PATH=/usr/lib/cmake/boost_atomic-1.86.0
-
-//The directory containing a CMake configuration file for boost_chrono.
-boost_chrono_DIR:PATH=/usr/lib/cmake/boost_chrono-1.86.0
-
-//The directory containing a CMake configuration file for boost_date_time.
-boost_date_time_DIR:PATH=/usr/lib/cmake/boost_date_time-1.86.0
-
-//The directory containing a CMake configuration file for boost_filesystem.
-boost_filesystem_DIR:PATH=/usr/lib/cmake/boost_filesystem-1.86.0
-
-//The directory containing a CMake configuration file for boost_headers.
-boost_headers_DIR:PATH=/usr/lib/cmake/boost_headers-1.86.0
-
-//The directory containing a CMake configuration file for boost_iostreams.
-boost_iostreams_DIR:PATH=/usr/lib/cmake/boost_iostreams-1.86.0
-
-//The directory containing a CMake configuration file for boost_locale.
-boost_locale_DIR:PATH=/usr/lib/cmake/boost_locale-1.86.0
-
-//The directory containing a CMake configuration file for boost_log.
-boost_log_DIR:PATH=/usr/lib/cmake/boost_log-1.86.0
-
-//The directory containing a CMake configuration file for boost_program_options.
-boost_program_options_DIR:PATH=/usr/lib/cmake/boost_program_options-1.86.0
-
-//The directory containing a CMake configuration file for boost_regex.
-boost_regex_DIR:PATH=/usr/lib/cmake/boost_regex-1.86.0
-
-//The directory containing a CMake configuration file for boost_system.
-boost_system_DIR:PATH=/usr/lib/cmake/boost_system-1.86.0
-
-//The directory containing a CMake configuration file for boost_thread.
-boost_thread_DIR:PATH=/usr/lib/cmake/boost_thread-1.86.0
-
-//The directory containing a CMake configuration file for cereal.
-cereal_DIR:PATH=cereal_DIR-NOTFOUND
-
-//The directory containing a CMake configuration file for glfw3.
-glfw3_DIR:PATH=/usr/lib/cmake/glfw3
-
-//Path to a library.
-pkgcfg_lib_PC_DBUS_dbus-1:FILEPATH=/usr/lib/libdbus-1.so
-
-//Path to a library.
-pkgcfg_lib_PC_EXPAT_expat:FILEPATH=/usr/lib/libexpat.so
-
-//Path to a library.
-pkgcfg_lib__OPENSSL_crypto:FILEPATH=/usr/lib/libcrypto.so
-
-//Path to a library.
-pkgcfg_lib__OPENSSL_ssl:FILEPATH=/usr/lib/libssl.so
-
-
-########################
-# INTERNAL cache entries
-########################
-
-//ADVANCED property for variable: Boost_DIR
-Boost_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_ADDR2LINE
-CMAKE_ADDR2LINE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_AR
-CMAKE_AR-ADVANCED:INTERNAL=1
-//This is the directory where this CMakeCache.txt was created
-CMAKE_CACHEFILE_DIR:INTERNAL=/home/scarjit/Git/OrcaSlicer/cmake-build-debug
-//Major version of cmake used to create the current loaded cache
-CMAKE_CACHE_MAJOR_VERSION:INTERNAL=3
-//Minor version of cmake used to create the current loaded cache
-CMAKE_CACHE_MINOR_VERSION:INTERNAL=30
-//Patch version of cmake used to create the current loaded cache
-CMAKE_CACHE_PATCH_VERSION:INTERNAL=5
-//Path to CMake executable.
-CMAKE_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake
-//Path to cpack program executable.
-CMAKE_CPACK_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cpack
-//Path to ctest program executable.
-CMAKE_CTEST_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/ctest
-//ADVANCED property for variable: CMAKE_CXX_COMPILER
-CMAKE_CXX_COMPILER-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_COMPILER_AR
-CMAKE_CXX_COMPILER_AR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_COMPILER_RANLIB
-CMAKE_CXX_COMPILER_RANLIB-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS
-CMAKE_CXX_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS_DEBUG
-CMAKE_CXX_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS_MINSIZEREL
-CMAKE_CXX_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELEASE
-CMAKE_CXX_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELWITHDEBINFO
-CMAKE_CXX_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_COMPILER
-CMAKE_C_COMPILER-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_COMPILER_AR
-CMAKE_C_COMPILER_AR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_COMPILER_RANLIB
-CMAKE_C_COMPILER_RANLIB-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS
-CMAKE_C_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS_DEBUG
-CMAKE_C_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS_MINSIZEREL
-CMAKE_C_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS_RELEASE
-CMAKE_C_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS_RELWITHDEBINFO
-CMAKE_C_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_DLLTOOL
-CMAKE_DLLTOOL-ADVANCED:INTERNAL=1
-//Executable file format
-CMAKE_EXECUTABLE_FORMAT:INTERNAL=ELF
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS
-CMAKE_EXE_LINKER_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_DEBUG
-CMAKE_EXE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_MINSIZEREL
-CMAKE_EXE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELEASE
-CMAKE_EXE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO
-CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXPORT_COMPILE_COMMANDS
-CMAKE_EXPORT_COMPILE_COMMANDS-ADVANCED:INTERNAL=1
-//Name of external makefile project generator.
-CMAKE_EXTRA_GENERATOR:INTERNAL=
-//Name of generator.
-CMAKE_GENERATOR:INTERNAL=Ninja
-//Generator instance identifier.
-CMAKE_GENERATOR_INSTANCE:INTERNAL=
-//Name of generator platform.
-CMAKE_GENERATOR_PLATFORM:INTERNAL=
-//Name of generator toolset.
-CMAKE_GENERATOR_TOOLSET:INTERNAL=
-//Test CMAKE_HAVE_LIBC_PTHREAD
-CMAKE_HAVE_LIBC_PTHREAD:INTERNAL=1
-//Source directory with the top level CMakeLists.txt file for this
-// project
-CMAKE_HOME_DIRECTORY:INTERNAL=/home/scarjit/Git/OrcaSlicer
-//ADVANCED property for variable: CMAKE_INSTALL_BINDIR
-CMAKE_INSTALL_BINDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_DATADIR
-CMAKE_INSTALL_DATADIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_DATAROOTDIR
-CMAKE_INSTALL_DATAROOTDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_DOCDIR
-CMAKE_INSTALL_DOCDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_INCLUDEDIR
-CMAKE_INSTALL_INCLUDEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_INFODIR
-CMAKE_INSTALL_INFODIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_LIBDIR
-CMAKE_INSTALL_LIBDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_LIBEXECDIR
-CMAKE_INSTALL_LIBEXECDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_LOCALEDIR
-CMAKE_INSTALL_LOCALEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_LOCALSTATEDIR
-CMAKE_INSTALL_LOCALSTATEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_MANDIR
-CMAKE_INSTALL_MANDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_OLDINCLUDEDIR
-CMAKE_INSTALL_OLDINCLUDEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_RUNSTATEDIR
-CMAKE_INSTALL_RUNSTATEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_SBINDIR
-CMAKE_INSTALL_SBINDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_SHAREDSTATEDIR
-CMAKE_INSTALL_SHAREDSTATEDIR-ADVANCED:INTERNAL=1
-//Install .so files without execute permission.
-CMAKE_INSTALL_SO_NO_EXE:INTERNAL=0
-//ADVANCED property for variable: CMAKE_INSTALL_SYSCONFDIR
-CMAKE_INSTALL_SYSCONFDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_LINKER
-CMAKE_LINKER-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS
-CMAKE_MODULE_LINKER_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_DEBUG
-CMAKE_MODULE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL
-CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELEASE
-CMAKE_MODULE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO
-CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_NM
-CMAKE_NM-ADVANCED:INTERNAL=1
-//number of local generators
-CMAKE_NUMBER_OF_MAKEFILES:INTERNAL=1
-//ADVANCED property for variable: CMAKE_OBJCOPY
-CMAKE_OBJCOPY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_OBJDUMP
-CMAKE_OBJDUMP-ADVANCED:INTERNAL=1
-//Platform information initialized
-CMAKE_PLATFORM_INFO_INITIALIZED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_RANLIB
-CMAKE_RANLIB-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_READELF
-CMAKE_READELF-ADVANCED:INTERNAL=1
-//Path to CMake installation.
-CMAKE_ROOT:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS
-CMAKE_SHARED_LINKER_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_DEBUG
-CMAKE_SHARED_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL
-CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELEASE
-CMAKE_SHARED_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO
-CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SKIP_INSTALL_RPATH
-CMAKE_SKIP_INSTALL_RPATH-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SKIP_RPATH
-CMAKE_SKIP_RPATH-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS
-CMAKE_STATIC_LINKER_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_DEBUG
-CMAKE_STATIC_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL
-CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELEASE
-CMAKE_STATIC_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO
-CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STRIP
-CMAKE_STRIP-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_TAPI
-CMAKE_TAPI-ADVANCED:INTERNAL=1
-//uname command
-CMAKE_UNAME:INTERNAL=/usr/bin/uname
-//ADVANCED property for variable: CMAKE_VERBOSE_MAKEFILE
-CMAKE_VERBOSE_MAKEFILE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CURL_INCLUDE_DIR
-CURL_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CURL_LIBRARY_DEBUG
-CURL_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CURL_LIBRARY_RELEASE
-CURL_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: EIGEN3_INCLUDE_DIR
-EIGEN3_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: EXPAT_INCLUDE_DIR
-EXPAT_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: EXPAT_LIBRARY_DEBUG
-EXPAT_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: EXPAT_LIBRARY_RELEASE
-EXPAT_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//Details about finding Boost
-FIND_PACKAGE_MESSAGE_DETAILS_Boost:INTERNAL=[/usr/lib/cmake/Boost-1.86.0/BoostConfig.cmake][cfound components: system filesystem thread log locale regex chrono atomic date_time iostreams program_options ][v1.86.0(1.66)]
-//Details about finding CURL
-FIND_PACKAGE_MESSAGE_DETAILS_CURL:INTERNAL=[/usr/lib/libcurl.so][/usr/include][v8.11.0()]
-//Details about finding DBus
-FIND_PACKAGE_MESSAGE_DETAILS_DBus:INTERNAL=[/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include][/usr/lib/libdbus-1.so][v()]
-//Details about finding EXPAT
-FIND_PACKAGE_MESSAGE_DETAILS_EXPAT:INTERNAL=[/usr/lib/libexpat.so][/usr/include][v2.6.4()]
-//Details about finding GLEW
-FIND_PACKAGE_MESSAGE_DETAILS_GLEW:INTERNAL=[/usr/include][/usr/lib/libGLEW.so][v2.2.0()]
-//Details about finding OpenGL
-FIND_PACKAGE_MESSAGE_DETAILS_OpenGL:INTERNAL=[/usr/lib/libOpenGL.so][/usr/lib/libGLX.so][/usr/include][c ][v()]
-//Details about finding OpenSSL
-FIND_PACKAGE_MESSAGE_DETAILS_OpenSSL:INTERNAL=[/usr/lib/libcrypto.so][/usr/include][c ][v3.4.0()]
-//Details about finding PNG
-FIND_PACKAGE_MESSAGE_DETAILS_PNG:INTERNAL=[/usr/lib/libpng.so][/usr/include][v1.6.44()]
-//Details about finding PkgConfig
-FIND_PACKAGE_MESSAGE_DETAILS_PkgConfig:INTERNAL=[/usr/bin/pkg-config][v2.1.1()]
-//Details about finding Threads
-FIND_PACKAGE_MESSAGE_DETAILS_Threads:INTERNAL=[TRUE][v()]
-//Details about finding ZLIB
-FIND_PACKAGE_MESSAGE_DETAILS_ZLIB:INTERNAL=[/usr/lib/libz.so][/usr/include][c ][v1.3.1()]
-//ADVANCED property for variable: GLEW_INCLUDE_DIR
-GLEW_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: GLEW_SHARED_LIBRARY_DEBUG
-GLEW_SHARED_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: GLEW_SHARED_LIBRARY_RELEASE
-GLEW_SHARED_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: GLEW_STATIC_LIBRARY_DEBUG
-GLEW_STATIC_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: GLEW_STATIC_LIBRARY_RELEASE
-GLEW_STATIC_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//Have include cereal/cereal.hpp
-HAVE_CEREAL_H:INTERNAL=
-//ADVANCED property for variable: OPENGL_EGL_INCLUDE_DIR
-OPENGL_EGL_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_GLES2_INCLUDE_DIR
-OPENGL_GLES2_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_GLES3_INCLUDE_DIR
-OPENGL_GLES3_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_GLU_INCLUDE_DIR
-OPENGL_GLU_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_GLX_INCLUDE_DIR
-OPENGL_GLX_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_INCLUDE_DIR
-OPENGL_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_egl_LIBRARY
-OPENGL_egl_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_gl_LIBRARY
-OPENGL_gl_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_gles2_LIBRARY
-OPENGL_gles2_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_gles3_LIBRARY
-OPENGL_gles3_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_glu_LIBRARY
-OPENGL_glu_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_glx_LIBRARY
-OPENGL_glx_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_opengl_LIBRARY
-OPENGL_opengl_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_xmesa_INCLUDE_DIR
-OPENGL_xmesa_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENSSL_CRYPTO_LIBRARY
-OPENSSL_CRYPTO_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENSSL_INCLUDE_DIR
-OPENSSL_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENSSL_SSL_LIBRARY
-OPENSSL_SSL_LIBRARY-ADVANCED:INTERNAL=1
-PC_DBUS_CFLAGS:INTERNAL=-I/usr/include/dbus-1.0;-I/usr/lib/dbus-1.0/include
-PC_DBUS_CFLAGS_I:INTERNAL=
-PC_DBUS_CFLAGS_OTHER:INTERNAL=
-PC_DBUS_FOUND:INTERNAL=1
-PC_DBUS_INCLUDEDIR:INTERNAL=/usr/include
-PC_DBUS_INCLUDE_DIRS:INTERNAL=/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
-PC_DBUS_LDFLAGS:INTERNAL=-L/usr/lib;-ldbus-1
-PC_DBUS_LDFLAGS_OTHER:INTERNAL=
-PC_DBUS_LIBDIR:INTERNAL=/usr/lib
-PC_DBUS_LIBRARIES:INTERNAL=dbus-1
-PC_DBUS_LIBRARY_DIRS:INTERNAL=/usr/lib
-PC_DBUS_LIBS:INTERNAL=
-PC_DBUS_LIBS_L:INTERNAL=
-PC_DBUS_LIBS_OTHER:INTERNAL=
-PC_DBUS_LIBS_PATHS:INTERNAL=
-PC_DBUS_MODULE_NAME:INTERNAL=dbus-1
-PC_DBUS_PREFIX:INTERNAL=/usr
-PC_DBUS_STATIC_CFLAGS:INTERNAL=-I/usr/include/dbus-1.0;-I/usr/lib/dbus-1.0/include
-PC_DBUS_STATIC_CFLAGS_I:INTERNAL=
-PC_DBUS_STATIC_CFLAGS_OTHER:INTERNAL=
-PC_DBUS_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
-PC_DBUS_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-ldbus-1;-lsystemd
-PC_DBUS_STATIC_LDFLAGS_OTHER:INTERNAL=
-PC_DBUS_STATIC_LIBDIR:INTERNAL=
-PC_DBUS_STATIC_LIBRARIES:INTERNAL=dbus-1;systemd
-PC_DBUS_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
-PC_DBUS_STATIC_LIBS:INTERNAL=
-PC_DBUS_STATIC_LIBS_L:INTERNAL=
-PC_DBUS_STATIC_LIBS_OTHER:INTERNAL=
-PC_DBUS_STATIC_LIBS_PATHS:INTERNAL=
-PC_DBUS_VERSION:INTERNAL=1.14.10
-PC_DBUS_dbus-1_INCLUDEDIR:INTERNAL=
-PC_DBUS_dbus-1_LIBDIR:INTERNAL=
-PC_DBUS_dbus-1_PREFIX:INTERNAL=
-PC_DBUS_dbus-1_VERSION:INTERNAL=
-PC_EXPAT_CFLAGS:INTERNAL=-I/usr/include
-PC_EXPAT_CFLAGS_I:INTERNAL=
-PC_EXPAT_CFLAGS_OTHER:INTERNAL=
-PC_EXPAT_FOUND:INTERNAL=1
-PC_EXPAT_INCLUDEDIR:INTERNAL=/usr/include
-PC_EXPAT_INCLUDE_DIRS:INTERNAL=/usr/include
-PC_EXPAT_LDFLAGS:INTERNAL=-L/usr/lib;-lexpat
-PC_EXPAT_LDFLAGS_OTHER:INTERNAL=
-PC_EXPAT_LIBDIR:INTERNAL=/usr/lib
-PC_EXPAT_LIBRARIES:INTERNAL=expat
-PC_EXPAT_LIBRARY_DIRS:INTERNAL=/usr/lib
-PC_EXPAT_LIBS:INTERNAL=
-PC_EXPAT_LIBS_L:INTERNAL=
-PC_EXPAT_LIBS_OTHER:INTERNAL=
-PC_EXPAT_LIBS_PATHS:INTERNAL=
-PC_EXPAT_MODULE_NAME:INTERNAL=expat
-PC_EXPAT_PREFIX:INTERNAL=/usr
-PC_EXPAT_STATIC_CFLAGS:INTERNAL=-I/usr/include;-DXML_STATIC
-PC_EXPAT_STATIC_CFLAGS_I:INTERNAL=
-PC_EXPAT_STATIC_CFLAGS_OTHER:INTERNAL=-DXML_STATIC
-PC_EXPAT_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include
-PC_EXPAT_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-lexpat;-lm
-PC_EXPAT_STATIC_LDFLAGS_OTHER:INTERNAL=
-PC_EXPAT_STATIC_LIBDIR:INTERNAL=
-PC_EXPAT_STATIC_LIBRARIES:INTERNAL=expat;m
-PC_EXPAT_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
-PC_EXPAT_STATIC_LIBS:INTERNAL=
-PC_EXPAT_STATIC_LIBS_L:INTERNAL=
-PC_EXPAT_STATIC_LIBS_OTHER:INTERNAL=
-PC_EXPAT_STATIC_LIBS_PATHS:INTERNAL=
-PC_EXPAT_VERSION:INTERNAL=2.6.4
-PC_EXPAT_expat_INCLUDEDIR:INTERNAL=
-PC_EXPAT_expat_LIBDIR:INTERNAL=
-PC_EXPAT_expat_PREFIX:INTERNAL=
-PC_EXPAT_expat_VERSION:INTERNAL=
-//ADVANCED property for variable: PKG_CONFIG_ARGN
-PKG_CONFIG_ARGN-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: PKG_CONFIG_EXECUTABLE
-PKG_CONFIG_EXECUTABLE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: PNG_LIBRARY_DEBUG
-PNG_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: PNG_LIBRARY_RELEASE
-PNG_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: PNG_PNG_INCLUDE_DIR
-PNG_PNG_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: ZLIB_INCLUDE_DIR
-ZLIB_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: ZLIB_LIBRARY_DEBUG
-ZLIB_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: ZLIB_LIBRARY_RELEASE
-ZLIB_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//linker supports push/pop state
-_CMAKE_LINKER_PUSHPOP_STATE_SUPPORTED:INTERNAL=TRUE
-//CMAKE_INSTALL_PREFIX during last run
-_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX:INTERNAL=/usr/local
-_OPENSSL_CFLAGS:INTERNAL=-I/usr/include
-_OPENSSL_CFLAGS_I:INTERNAL=
-_OPENSSL_CFLAGS_OTHER:INTERNAL=
-_OPENSSL_FOUND:INTERNAL=1
-_OPENSSL_INCLUDEDIR:INTERNAL=/usr/include
-_OPENSSL_INCLUDE_DIRS:INTERNAL=/usr/include
-_OPENSSL_LDFLAGS:INTERNAL=-L/usr/lib;-lssl;-lcrypto
-_OPENSSL_LDFLAGS_OTHER:INTERNAL=
-_OPENSSL_LIBDIR:INTERNAL=/usr/lib
-_OPENSSL_LIBRARIES:INTERNAL=ssl;crypto
-_OPENSSL_LIBRARY_DIRS:INTERNAL=/usr/lib
-_OPENSSL_LIBS:INTERNAL=
-_OPENSSL_LIBS_L:INTERNAL=
-_OPENSSL_LIBS_OTHER:INTERNAL=
-_OPENSSL_LIBS_PATHS:INTERNAL=
-_OPENSSL_MODULE_NAME:INTERNAL=openssl
-_OPENSSL_PREFIX:INTERNAL=/usr
-_OPENSSL_STATIC_CFLAGS:INTERNAL=-I/usr/include
-_OPENSSL_STATIC_CFLAGS_I:INTERNAL=
-_OPENSSL_STATIC_CFLAGS_OTHER:INTERNAL=
-_OPENSSL_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include
-_OPENSSL_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-lssl;-lcrypto;-ldl;-pthread;-L/usr/lib;-lcrypto;-ldl;-pthread
-_OPENSSL_STATIC_LDFLAGS_OTHER:INTERNAL=-pthread;-pthread
-_OPENSSL_STATIC_LIBDIR:INTERNAL=
-_OPENSSL_STATIC_LIBRARIES:INTERNAL=ssl;crypto;dl;crypto;dl
-_OPENSSL_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib;/usr/lib
-_OPENSSL_STATIC_LIBS:INTERNAL=
-_OPENSSL_STATIC_LIBS_L:INTERNAL=
-_OPENSSL_STATIC_LIBS_OTHER:INTERNAL=
-_OPENSSL_STATIC_LIBS_PATHS:INTERNAL=
-_OPENSSL_VERSION:INTERNAL=3.4.0
-_OPENSSL_openssl_INCLUDEDIR:INTERNAL=
-_OPENSSL_openssl_LIBDIR:INTERNAL=
-_OPENSSL_openssl_PREFIX:INTERNAL=
-_OPENSSL_openssl_VERSION:INTERNAL=
-__pkg_config_arguments_PC_DBUS:INTERNAL=QUIET;dbus-1
-__pkg_config_arguments_PC_EXPAT:INTERNAL=QUIET;expat
-__pkg_config_arguments__OPENSSL:INTERNAL=QUIET;openssl
-__pkg_config_checked_PC_DBUS:INTERNAL=1
-__pkg_config_checked_PC_EXPAT:INTERNAL=1
-__pkg_config_checked__OPENSSL:INTERNAL=1
-//ADVANCED property for variable: boost_atomic_DIR
-boost_atomic_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_chrono_DIR
-boost_chrono_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_date_time_DIR
-boost_date_time_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_filesystem_DIR
-boost_filesystem_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_headers_DIR
-boost_headers_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_iostreams_DIR
-boost_iostreams_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_locale_DIR
-boost_locale_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_log_DIR
-boost_log_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_program_options_DIR
-boost_program_options_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_regex_DIR
-boost_regex_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_system_DIR
-boost_system_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_thread_DIR
-boost_thread_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: pkgcfg_lib_PC_DBUS_dbus-1
-pkgcfg_lib_PC_DBUS_dbus-1-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: pkgcfg_lib_PC_EXPAT_expat
-pkgcfg_lib_PC_EXPAT_expat-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: pkgcfg_lib__OPENSSL_crypto
-pkgcfg_lib__OPENSSL_crypto-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: pkgcfg_lib__OPENSSL_ssl
-pkgcfg_lib__OPENSSL_ssl-ADVANCED:INTERNAL=1
-prefix_result:INTERNAL=/usr/lib
-
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
deleted file mode 100644
index d69cb8dd938..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
+++ /dev/null
@@ -1,81 +0,0 @@
-set(CMAKE_C_COMPILER "/usr/bin/cc")
-set(CMAKE_C_COMPILER_ARG1 "")
-set(CMAKE_C_COMPILER_ID "GNU")
-set(CMAKE_C_COMPILER_VERSION "14.2.1")
-set(CMAKE_C_COMPILER_VERSION_INTERNAL "")
-set(CMAKE_C_COMPILER_WRAPPER "")
-set(CMAKE_C_STANDARD_COMPUTED_DEFAULT "17")
-set(CMAKE_C_EXTENSIONS_COMPUTED_DEFAULT "ON")
-set(CMAKE_C_STANDARD_LATEST "23")
-set(CMAKE_C_COMPILE_FEATURES "c_std_90;c_function_prototypes;c_std_99;c_restrict;c_variadic_macros;c_std_11;c_static_assert;c_std_17;c_std_23")
-set(CMAKE_C90_COMPILE_FEATURES "c_std_90;c_function_prototypes")
-set(CMAKE_C99_COMPILE_FEATURES "c_std_99;c_restrict;c_variadic_macros")
-set(CMAKE_C11_COMPILE_FEATURES "c_std_11;c_static_assert")
-set(CMAKE_C17_COMPILE_FEATURES "c_std_17")
-set(CMAKE_C23_COMPILE_FEATURES "c_std_23")
-
-set(CMAKE_C_PLATFORM_ID "Linux")
-set(CMAKE_C_SIMULATE_ID "")
-set(CMAKE_C_COMPILER_FRONTEND_VARIANT "GNU")
-set(CMAKE_C_SIMULATE_VERSION "")
-
-
-
-
-set(CMAKE_AR "/usr/bin/ar")
-set(CMAKE_C_COMPILER_AR "/usr/bin/gcc-ar")
-set(CMAKE_RANLIB "/usr/bin/ranlib")
-set(CMAKE_C_COMPILER_RANLIB "/usr/bin/gcc-ranlib")
-set(CMAKE_LINKER "/usr/bin/ld")
-set(CMAKE_LINKER_LINK "")
-set(CMAKE_LINKER_LLD "")
-set(CMAKE_C_COMPILER_LINKER "/usr/bin/ld")
-set(CMAKE_C_COMPILER_LINKER_ID "GNU")
-set(CMAKE_C_COMPILER_LINKER_VERSION 2.43.0)
-set(CMAKE_C_COMPILER_LINKER_FRONTEND_VARIANT GNU)
-set(CMAKE_MT "")
-set(CMAKE_TAPI "CMAKE_TAPI-NOTFOUND")
-set(CMAKE_COMPILER_IS_GNUCC 1)
-set(CMAKE_C_COMPILER_LOADED 1)
-set(CMAKE_C_COMPILER_WORKS TRUE)
-set(CMAKE_C_ABI_COMPILED TRUE)
-
-set(CMAKE_C_COMPILER_ENV_VAR "CC")
-
-set(CMAKE_C_COMPILER_ID_RUN 1)
-set(CMAKE_C_SOURCE_FILE_EXTENSIONS c;m)
-set(CMAKE_C_IGNORE_EXTENSIONS h;H;o;O;obj;OBJ;def;DEF;rc;RC)
-set(CMAKE_C_LINKER_PREFERENCE 10)
-set(CMAKE_C_LINKER_DEPFILE_SUPPORTED FALSE)
-
-# Save compiler ABI information.
-set(CMAKE_C_SIZEOF_DATA_PTR "8")
-set(CMAKE_C_COMPILER_ABI "ELF")
-set(CMAKE_C_BYTE_ORDER "LITTLE_ENDIAN")
-set(CMAKE_C_LIBRARY_ARCHITECTURE "")
-
-if(CMAKE_C_SIZEOF_DATA_PTR)
-  set(CMAKE_SIZEOF_VOID_P "${CMAKE_C_SIZEOF_DATA_PTR}")
-endif()
-
-if(CMAKE_C_COMPILER_ABI)
-  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_C_COMPILER_ABI}")
-endif()
-
-if(CMAKE_C_LIBRARY_ARCHITECTURE)
-  set(CMAKE_LIBRARY_ARCHITECTURE "")
-endif()
-
-set(CMAKE_C_CL_SHOWINCLUDES_PREFIX "")
-if(CMAKE_C_CL_SHOWINCLUDES_PREFIX)
-  set(CMAKE_CL_SHOWINCLUDES_PREFIX "${CMAKE_C_CL_SHOWINCLUDES_PREFIX}")
-endif()
-
-
-
-
-
-set(CMAKE_C_IMPLICIT_INCLUDE_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include")
-set(CMAKE_C_IMPLICIT_LINK_LIBRARIES "gcc;gcc_s;c;gcc;gcc_s")
-set(CMAKE_C_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib")
-set(CMAKE_C_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "")
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
deleted file mode 100644
index 7a492576727..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
+++ /dev/null
@@ -1,105 +0,0 @@
-set(CMAKE_CXX_COMPILER "/usr/bin/c++")
-set(CMAKE_CXX_COMPILER_ARG1 "")
-set(CMAKE_CXX_COMPILER_ID "GNU")
-set(CMAKE_CXX_COMPILER_VERSION "14.2.1")
-set(CMAKE_CXX_COMPILER_VERSION_INTERNAL "")
-set(CMAKE_CXX_COMPILER_WRAPPER "")
-set(CMAKE_CXX_STANDARD_COMPUTED_DEFAULT "17")
-set(CMAKE_CXX_EXTENSIONS_COMPUTED_DEFAULT "ON")
-set(CMAKE_CXX_STANDARD_LATEST "26")
-set(CMAKE_CXX_COMPILE_FEATURES "cxx_std_98;cxx_template_template_parameters;cxx_std_11;cxx_alias_templates;cxx_alignas;cxx_alignof;cxx_attributes;cxx_auto_type;cxx_constexpr;cxx_decltype;cxx_decltype_incomplete_return_types;cxx_default_function_template_args;cxx_defaulted_functions;cxx_defaulted_move_initializers;cxx_delegating_constructors;cxx_deleted_functions;cxx_enum_forward_declarations;cxx_explicit_conversions;cxx_extended_friend_declarations;cxx_extern_templates;cxx_final;cxx_func_identifier;cxx_generalized_initializers;cxx_inheriting_constructors;cxx_inline_namespaces;cxx_lambdas;cxx_local_type_template_args;cxx_long_long_type;cxx_noexcept;cxx_nonstatic_member_init;cxx_nullptr;cxx_override;cxx_range_for;cxx_raw_string_literals;cxx_reference_qualified_functions;cxx_right_angle_brackets;cxx_rvalue_references;cxx_sizeof_member;cxx_static_assert;cxx_strong_enums;cxx_thread_local;cxx_trailing_return_types;cxx_unicode_literals;cxx_uniform_initialization;cxx_unrestricted_unions;cxx_user_literals;cxx_variadic_macros;cxx_variadic_templates;cxx_std_14;cxx_aggregate_default_initializers;cxx_attribute_deprecated;cxx_binary_literals;cxx_contextual_conversions;cxx_decltype_auto;cxx_digit_separators;cxx_generic_lambdas;cxx_lambda_init_captures;cxx_relaxed_constexpr;cxx_return_type_deduction;cxx_variable_templates;cxx_std_17;cxx_std_20;cxx_std_23;cxx_std_26")
-set(CMAKE_CXX98_COMPILE_FEATURES "cxx_std_98;cxx_template_template_parameters")
-set(CMAKE_CXX11_COMPILE_FEATURES "cxx_std_11;cxx_alias_templates;cxx_alignas;cxx_alignof;cxx_attributes;cxx_auto_type;cxx_constexpr;cxx_decltype;cxx_decltype_incomplete_return_types;cxx_default_function_template_args;cxx_defaulted_functions;cxx_defaulted_move_initializers;cxx_delegating_constructors;cxx_deleted_functions;cxx_enum_forward_declarations;cxx_explicit_conversions;cxx_extended_friend_declarations;cxx_extern_templates;cxx_final;cxx_func_identifier;cxx_generalized_initializers;cxx_inheriting_constructors;cxx_inline_namespaces;cxx_lambdas;cxx_local_type_template_args;cxx_long_long_type;cxx_noexcept;cxx_nonstatic_member_init;cxx_nullptr;cxx_override;cxx_range_for;cxx_raw_string_literals;cxx_reference_qualified_functions;cxx_right_angle_brackets;cxx_rvalue_references;cxx_sizeof_member;cxx_static_assert;cxx_strong_enums;cxx_thread_local;cxx_trailing_return_types;cxx_unicode_literals;cxx_uniform_initialization;cxx_unrestricted_unions;cxx_user_literals;cxx_variadic_macros;cxx_variadic_templates")
-set(CMAKE_CXX14_COMPILE_FEATURES "cxx_std_14;cxx_aggregate_default_initializers;cxx_attribute_deprecated;cxx_binary_literals;cxx_contextual_conversions;cxx_decltype_auto;cxx_digit_separators;cxx_generic_lambdas;cxx_lambda_init_captures;cxx_relaxed_constexpr;cxx_return_type_deduction;cxx_variable_templates")
-set(CMAKE_CXX17_COMPILE_FEATURES "cxx_std_17")
-set(CMAKE_CXX20_COMPILE_FEATURES "cxx_std_20")
-set(CMAKE_CXX23_COMPILE_FEATURES "cxx_std_23")
-set(CMAKE_CXX26_COMPILE_FEATURES "cxx_std_26")
-
-set(CMAKE_CXX_PLATFORM_ID "Linux")
-set(CMAKE_CXX_SIMULATE_ID "")
-set(CMAKE_CXX_COMPILER_FRONTEND_VARIANT "GNU")
-set(CMAKE_CXX_SIMULATE_VERSION "")
-
-
-
-
-set(CMAKE_AR "/usr/bin/ar")
-set(CMAKE_CXX_COMPILER_AR "/usr/bin/gcc-ar")
-set(CMAKE_RANLIB "/usr/bin/ranlib")
-set(CMAKE_CXX_COMPILER_RANLIB "/usr/bin/gcc-ranlib")
-set(CMAKE_LINKER "/usr/bin/ld")
-set(CMAKE_LINKER_LINK "")
-set(CMAKE_LINKER_LLD "")
-set(CMAKE_CXX_COMPILER_LINKER "/usr/bin/ld")
-set(CMAKE_CXX_COMPILER_LINKER_ID "GNU")
-set(CMAKE_CXX_COMPILER_LINKER_VERSION 2.43.0)
-set(CMAKE_CXX_COMPILER_LINKER_FRONTEND_VARIANT GNU)
-set(CMAKE_MT "")
-set(CMAKE_TAPI "CMAKE_TAPI-NOTFOUND")
-set(CMAKE_COMPILER_IS_GNUCXX 1)
-set(CMAKE_CXX_COMPILER_LOADED 1)
-set(CMAKE_CXX_COMPILER_WORKS TRUE)
-set(CMAKE_CXX_ABI_COMPILED TRUE)
-
-set(CMAKE_CXX_COMPILER_ENV_VAR "CXX")
-
-set(CMAKE_CXX_COMPILER_ID_RUN 1)
-set(CMAKE_CXX_SOURCE_FILE_EXTENSIONS C;M;c++;cc;cpp;cxx;m;mm;mpp;CPP;ixx;cppm;ccm;cxxm;c++m)
-set(CMAKE_CXX_IGNORE_EXTENSIONS inl;h;hpp;HPP;H;o;O;obj;OBJ;def;DEF;rc;RC)
-
-foreach (lang IN ITEMS C OBJC OBJCXX)
-  if (CMAKE_${lang}_COMPILER_ID_RUN)
-    foreach(extension IN LISTS CMAKE_${lang}_SOURCE_FILE_EXTENSIONS)
-      list(REMOVE_ITEM CMAKE_CXX_SOURCE_FILE_EXTENSIONS ${extension})
-    endforeach()
-  endif()
-endforeach()
-
-set(CMAKE_CXX_LINKER_PREFERENCE 30)
-set(CMAKE_CXX_LINKER_PREFERENCE_PROPAGATES 1)
-set(CMAKE_CXX_LINKER_DEPFILE_SUPPORTED FALSE)
-
-# Save compiler ABI information.
-set(CMAKE_CXX_SIZEOF_DATA_PTR "8")
-set(CMAKE_CXX_COMPILER_ABI "ELF")
-set(CMAKE_CXX_BYTE_ORDER "LITTLE_ENDIAN")
-set(CMAKE_CXX_LIBRARY_ARCHITECTURE "")
-
-if(CMAKE_CXX_SIZEOF_DATA_PTR)
-  set(CMAKE_SIZEOF_VOID_P "${CMAKE_CXX_SIZEOF_DATA_PTR}")
-endif()
-
-if(CMAKE_CXX_COMPILER_ABI)
-  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_CXX_COMPILER_ABI}")
-endif()
-
-if(CMAKE_CXX_LIBRARY_ARCHITECTURE)
-  set(CMAKE_LIBRARY_ARCHITECTURE "")
-endif()
-
-set(CMAKE_CXX_CL_SHOWINCLUDES_PREFIX "")
-if(CMAKE_CXX_CL_SHOWINCLUDES_PREFIX)
-  set(CMAKE_CL_SHOWINCLUDES_PREFIX "${CMAKE_CXX_CL_SHOWINCLUDES_PREFIX}")
-endif()
-
-
-
-
-
-set(CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES "/usr/include/c++/14.2.1;/usr/include/c++/14.2.1/x86_64-pc-linux-gnu;/usr/include/c++/14.2.1/backward;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include")
-set(CMAKE_CXX_IMPLICIT_LINK_LIBRARIES "stdc++;m;gcc_s;gcc;c;gcc_s;gcc")
-set(CMAKE_CXX_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib")
-set(CMAKE_CXX_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "")
-set(CMAKE_CXX_COMPILER_CLANG_RESOURCE_DIR "")
-
-set(CMAKE_CXX_COMPILER_IMPORT_STD "")
-### Imported target for C++23 standard library
-set(CMAKE_CXX23_COMPILER_IMPORT_STD_NOT_FOUND_MESSAGE "Toolchain does not support discovering `import std` support")
-
-
-### Imported target for C++26 standard library
-set(CMAKE_CXX26_COMPILER_IMPORT_STD_NOT_FOUND_MESSAGE "Toolchain does not support discovering `import std` support")
-
-
-
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin b/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin
deleted file mode 100755
index 6f4e7c0e50420bf30feec79c4ad403f23f067405..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 15448
zcmeHOU2Ggz6~4Q68mGkBO&SNc3C*aWsFCo*b{)$NO1t)Y?ODk`A>9a2lupOqu{~nF
zYj($A7ic2_D61&Q2nl$gQY55Gya7T~eQ7rs_2;Rn5K@JBFomMDN=XnD8Hl``GjqQ6
zc(N`PAYMAhnmKd6bH01;ocX&ubNqB>Y$P6wDM*WYM6snMeIzB0&mNZzQYkf{+G%}A
z9aMLb-Rfb!Kjka(`tnA6t8Np#g*5Xzd83Iw<ipg5FBl<f=4~hIJA4nclKo(w=Moz@
z^fS@{H1I}$n)Ddbt-^y2@;En1-RC7A*{YS~rA;(=Y%)(1o+do#E7Bh{^2s^jWkB*7
z)+zF_q`b9KVcwGP!g^TZp}7y1$KG=D|4DzRgtwx3&8V=(@rFi!pC%sX<%0?i^J(dC
zyW?<6@(C@bI#zI|`umO*@?8a|xVY4{G|=DG-=|kfdapMG9#=Old`^u{oKf-fs>T@j
zF%{cl$Hk@)PdIizEu41d|Ng13Tp4}k>1XGU{PsJO?{vn8Uwg62F}xq#CdaTa#tVdf
zSb%*H&76Hr0@H+PO>lD?ytoa158)3qX-AnRWp>)ExK`OU=Pjp5$n=tB&NxM@;5=z7
zc5|Nl)#zAuC~fxYz54OS_CtNj%;v_;yj`|uor-IhbK~hksc7e{se(;y&CZvK(z@w~
zHVssC0n#y|KmWv!k<H`9d9!$*vx|?;Ck6Z2x4%oLU!3lIzTkSsb(Gxe<DGK70<TGf
zZ7JUm9CqzdALnzMj|t?J0M7RW$h812m#pV{BY+3bkF@|Uw?;G-=_mtH2BHi^8Hh3v
zWgyBxlz|Un2L6(`{~yMM8*Rp=9aoPjWqhON#_QLN3%_hz^|HbKo_Dj=*B>{kZyFc=
zaO+eq(^Knt)wq1}Hxy9s_%gBnI-@5Jf8C2G{CRHY@{XUfdU)OKpr#*}rgzoX5{J)o
z;HqefuX^#vzsBn5hEcs`T>aCd#?|!}BleQ<`i8ro8t9S++UjdFiNnL2d>-HVlNoZW
z#fQ!q7f#;In@065x81mO@(3CAj&=GieSNxKufMe85CO4stDECpo!Q(@98M{2@9kNN
zJwt6&zk0){F0Q?txy?hql(}Ji-?-fI_8z4YKW|MYUZ}+~w*}qLyL^*9&$Y%A&xJkj
zHS=`TLoMAtx7s)!jU&KaM-pWq%0QHXC<9Rjq6|bCh%yjmAj&|LfhYq}2L8JY@OQ8G
zlkCLE<cSJ>mn+Sf`31LpwtL`QFn%ICIWl#^T{i7<$<CiGXNSzuiA;8QVo-T;9)D`t
zwarqQzS*4}%jR-p88b66oE@B?2+wa#IcKR3feEpLEuZ3VzdWjyoAo+>Z>!#_*H4jV
z;cuoau_sTf*itffaQDu(75Z?-IP*>s=LiQ3@ASUBG1f;*54G_n#s~K#zZp-r-xV(t
zlYvO03`7}-G7x1T%0QHXC<9Rjq6|bCh%)fu%mC^bQMZViM6Qiw+3l-Fp=7(*D^mY>
zuh^)MJSaAPYTYL`>LmI184LXHZPZI_*QB@+HH!;U)W~&`ENkMw+c(uk(H{}rDY`>6
z)K1wLkcQE3O>ipu^aT8W*8TAi=!I^G-6nkcQtXWvd7_`0p1m&P{kzz~T21NV|Ef?w
zzFnuNM;%S4PiPNPweeA{r;jRcd$iu}-oEaEZYsfT?s~YVd%H#n=e)G4Ki9({d|YB`
zk4kC2=Y9#`witgxa8YVP@bd!Dm-B`+YyUIkjj4N7c)y?UScyj6IU1>W@g3^A)XM^|
z(nhm7>1PSo5ERgFdiVjQQUQ=Qe?iM$+AmG>ah#XGA~UHDsAS5=vF756eergM>k9Z9
zZE$?J{dWo1XbH=00`|raC>&q-cg6hifF!4@>Lfg=KB_uXi1hUzN$sPnU-RCoDCNCl
zA?#xkA0Gcv!a4q4xi5I{UMOBCoW~Q6KS8)g{;=c-e;^E!T_Sv6oUV2mPa`BfZhhWP
zr%Uq-PQfk@4rTRe<rHU1=H^Q%bIO@D?PA`sig&mQj_VfeEna#%rOe^aO$?4_(^Ozi
z*M^xf%#qWB;~CQ!KCR5rvB{yqF>`Wc<grZ7%nc6F3$8os+*2rL|2HM<-e3c7+>~kO
zE!R?9Ax{G_+3*Y8@2GY+^Ocf0XBG2Y37?&$sJv4&7b|w28Y$AsoT^lWE2Z~TJ<l)W
z%=fF6-&&yG*bgqtH)%{R9o5S6ylYL7cFVq=!<JK|8vO;O7fY_K&lVT;g>q@ZF1yPC
zXll`+f3$G&0?|S1a;;hAh0j@)Ii=^9i`0d$-LmibqFt^yrQ#ODBwyJsSWHm5H#pt3
zmt3WL+0)A<FPFMKXU>$ZdE1=J69bmdFs*XgqTw+E+ti#j?@Uu)C2EUS`a*#={KhD$
zN}n#x&)Y@H#s5b5xk;yZ<LzvxJV2oF+(d628<dZe!Oyz5fCIvZP6-Z$=OFBU+6eNO
zgb)1*1d7J}18_FP|AFwKH3W(d^ZEY$H+ptr{Fo0wWB)N92#?<)KF<Zf$9w^LMf&A^
z<lKRe=e|Q24;g&SKcFv?FDT*se}SAlHvk{=0cgylFn+{AKSg|=Yrw{Q1Dc<cEaCC{
zs8W|{gL4W#<~z_e2}J+l{r?{Md7t2K+-K!}i+P<iv*mx17<-16ARo^S=!H<i!ng4s
zhWL06LSx>^eX)ekpC1v%U10x}Mh1)Kt<|@D)mRJMuzx~ZLH>#aK;!%aA>99qA^wkr
z51j*1H1ZGlRodV=j$Aeh^J)AaTR0vz^skAV2=FoA?$ik+L7Z=G+Q5HD4nFqiAM+^u
zU*Z)`4hf%sEa2fdzC##?fRF!ksvYBKr5^NEV+}s^P4Wc!n3r7_KCV+V03P&uh_6x-
zDHjgL8Ro;@pbc&d<Hvj@DSY&Ucu5CL)j|Mc65hbU=lg3=zz^!ixf=*Hq``~g<lj@f
mXu)`p7sfF509{?{^{qv8B+igYbJgbj41Y``*&QN;O!Y4&j*!#<

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin b/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin
deleted file mode 100755
index 66c99e8612cf056b64d38a16057ec51886004a16..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 15464
zcmeHOU2Ggz6~4Q68VBO6Q{pzQLo+I<Y7{*Fsbe{*OxHha&r1FYsUrd*OxL?(d&GKo
znH?9q64b&4VTDvKLQo0%fOzUt0U-(xz(z(bc}pIUBE*BKsBo)5jA$V(k(YC3&bJwl
z*5yy)p_*&WeD{3koO|z_JL9=KbLQ#P*hoAUQz#AU<BBD%#b=VDm^&dAf~4wG&9pzF
z+SFYnH+r0}Px?Swzg&;+#3tbz2-)v2SL)yqpQb+if)O&Z-)=?Y0Z{=eIS%&Q!wQkZ
z_=0o*gud3F#?DkUZ(qYk@dF0^cqkj~zWql3PVAJp^a;X`MfTegzb)|tUX}iUh$qK{
zw?2ty7?Y&qlJxdUh5Z)AFO0)t59B_$JpQ_y`)~R?Eq-g7*Nh4y<{OCqK0$smwZ7xO
z*khW{NPoM{gC_9@N_bUA-k$F5>B#5W^LAljv3;?xx4pMVFBkQ0uV)@tCvALAjZU0Z
z@nuzE4*oF}+abqACKIo)?IGGY?Cf9s-8*f^zj@7Q{@%hffB*UA+=~NNoNf3xxJ|a<
z!W?fXtiuNG-@$Wa^k5ys5#sKy!}B<_Iz0DXkN?;%yfV$%`C`E=yBWtdO=YI1#?74N
zShIH7wVbK(p?tAmO=YI@manU?F==|T(#U+qE>N@C#f&*)7czPKDNB*M?B=q^kMoT6
zvN&I>&1T7yr7q^PK0i8^9vm{e^+$RXs@=NxKQB&mM6*eMTw*G&o+ZTj_2cKhMW<zh
zdS1AN`|W*-Y`)LNRB+wndTTl8^P6&AgRe+~O-Wx59&+U|pXY19ABivjI>5`R>?y7W
zc)7Ga{(689o<|!2-upl4Hy`bz2t*NxA`nF&ia->BC<0Lg-e(c`YvO@-jg=cs#>G8X
zI+QZLQgP$etH#Q&n%2D|WqsG5(yP}#YplLzto&i?^i-;=(sjkS)c;#DsJ5<<*IP4s
z;^;G;J@G%|b}sGt5yQz_ZYwoCBTetCZX}K_v*EfR*{^!`C%(*ZY};7fGA{r5G2`;B
z1|#;0ac$c@L=Bvf2AZlHGl`?acl>#L%l#=*tA$6-8Y}&8>QpsWUw500i~SD~Uv0fk
z)MmC?t-iA72obRh>vzVxK69s@IGR-4-W#)IdzRW*{o)N{bz$Sx)NLN}#ncVsdE-*+
z8wZq1{G_oZ@rz0<bz9g&e8@Lh^KxT6@p4%6c0EmNHPq7W3+uJ{sLcR(9hE2oQ3Rq0
zL=lK05Je!0Koo%}0#O8_2t*NxBJjUOfZu1mS4mHdOr9#!E4AW`nJc-@`OdxzLHmjH
z<jC|XcgeJzqLn-EqzBE>iBx)cVnBIzp8xccYnerdUh|zFOHWOWrOedCaC%^ZEIfT?
z+CEQt2<#ARYj~93{qm^RZdR*(gsWTC>S;nQ{LYk1?5Q&<w%8JD+rPJIjb4Z`&wi)L
z=OH#2-s`<lW3Gp`E^6Zo%nuxB`D%Qq`L4J_o=ij~ia->BC<0Lgq6kD0h$0Y0Ac{Z~
zfhYp+j|d>&5c!439h{ZJgZyMjUJl96io9PC36RYquSs6xeIg_8u}x(B)Vg0}<UjK7
zGcM4-y<IJ`T#=+j<RX?NS&{P}xon931HPzU68xaxVZl~Gz+S05Aq}J7itv=Y=@t0@
zqw0@`NY8Xz<WBLYH^ts~5l8x&>B*Yt-w`>OgDGA7Ujg~!yLE~@)6t=!Q`*CnZG24Y
z>e0LPF0H$>yQj0S^Mu+(b+W5-w?>KQxHPK2RKq5Gp2XAvrD?tf^VA`HQuqgawVD+E
z3E>5lBmA-u^hUi_>h=4yr%lxI&SCrws>IZXR5(uG@%UD?DfzLm{~=Xc)IF*t3C73c
zF{L!(Rfzv7sSncelF}>4y?vFW2YqVC{xy>BR{Pa`a$R}PE{OXhZ3pA`D9jg}-eUWB
zv%+-<{$1uF1h9j~$?a>BckDegA^p9~$LT5(9xfjyp8E|S?=j*z4&meN_4s?$;Urq{
z@loN!?Tiwy?KJhI>@K{s3$KR8GoQ1D&Yc@7&X?@G<qQm_^=zr6%ukPX_1cA*q8WIa
z#ca3F-g!o4PTRAlRmj;HN-HP*NzW^w&)cq>w*n@8o&`O{qBL~6bj*}tj+_}7PnpK>
z8D$QCYGPnKJ*3RhvB|-KF>`Wc<nh#$IW;gy55kmb<uY!Da@{8>ojqq4%!RU*3#GFs
zgDL5f?w%_b&ACh=$9eLU_Rd|0a^h=Vl+$jKg-a%sU(e6pIPu=(e*F}B8bpEnoGzC^
zyjNO&oeciES^7#ZFU`A|X+qcWaSk=RK-vB!r5B2>rOy@?^paC7S&q9Dpr#jW`u@Vs
z2}Lv6?q+6{XFiuH&nZ2(RG=<=bRA#wq~(<DVqu41lFqU68Fo;*7Yp6B7G0%#q0^nB
zHwn5mXU;g8dCQ#3kq0E-!^}8NhK9!;s8e&9c{@ve6{#)S>7_hX{KhDnO3xPO=dFTU
z=gj`kD87%<DPMb9dsuELK-@>sD%%FjM@Zm%UtGvO@dqY_2jIR4xtA(I|3&c!eiVj+
z`2Pkv9rFLK_yaW<3WohZN&MgFUW)N!eE`JqV|@@Fe}?>dZ2*6)AAoDpFCQbv4*pmN
z*u?RW;g9tQ@Fmg(OE~_YCnc{H;E(kI5bG+8A9lbmkw33JAY=VeL+Ly`evIi7RXC>b
z$NC3Y5kvGJKK^f$o{tIo+WkT96Ika-GdsRfV(tang8sPg0862Og>FCI_cTF&+~<H;
zhwj$@i_$-iUuj|~i1n?oH8o_u-*f-)U(<XI5a*xI?)*lJxnI&2^#6gztWv-!U##sB
ze-Kxw!fPA3Y--;X;k&l5J!If-$Tt!2$NGCyzB7a!nRo><@b|>>+@pW2lklA)zDMNq
zj|==Tk8cvk#}9ve&s5<BAC-rFsO{koyh)m%Kh|TL;*aYT4Zsh0E99?|V%g~<#wl!V
z{E)Y)!fj#vSiiK0Kl*_^k2P2th+t04YbyBj|JPuFe-Lr*1?>!J@N1&v-&g#b2;)Iq
j_7R7%2mP;h`_k9ZktjnVtzGN;e}-SKQQ04I2#M;S&VRIx

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
deleted file mode 100644
index b0b76c86f9e..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
+++ /dev/null
@@ -1,15 +0,0 @@
-set(CMAKE_HOST_SYSTEM "Linux-6.10.2-273-tkg-eevdf")
-set(CMAKE_HOST_SYSTEM_NAME "Linux")
-set(CMAKE_HOST_SYSTEM_VERSION "6.10.2-273-tkg-eevdf")
-set(CMAKE_HOST_SYSTEM_PROCESSOR "x86_64")
-
-
-
-set(CMAKE_SYSTEM "Linux-6.10.2-273-tkg-eevdf")
-set(CMAKE_SYSTEM_NAME "Linux")
-set(CMAKE_SYSTEM_VERSION "6.10.2-273-tkg-eevdf")
-set(CMAKE_SYSTEM_PROCESSOR "x86_64")
-
-set(CMAKE_CROSSCOMPILING "FALSE")
-
-set(CMAKE_SYSTEM_LOADED 1)
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
deleted file mode 100644
index 8d8bb038bb3..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
+++ /dev/null
@@ -1,904 +0,0 @@
-#ifdef __cplusplus
-# error "A C++ compiler has been selected for C."
-#endif
-
-#if defined(__18CXX)
-# define ID_VOID_MAIN
-#endif
-#if defined(__CLASSIC_C__)
-/* cv-qualifiers did not exist in K&R C */
-# define const
-# define volatile
-#endif
-
-#if !defined(__has_include)
-/* If the compiler does not have __has_include, pretend the answer is
-   always no.  */
-#  define __has_include(x) 0
-#endif
-
-
-/* Version number components: V=Version, R=Revision, P=Patch
-   Version date components:   YYYY=Year, MM=Month,   DD=Day  */
-
-#if defined(__INTEL_COMPILER) || defined(__ICC)
-# define COMPILER_ID "Intel"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# if defined(__GNUC__)
-#  define SIMULATE_ID "GNU"
-# endif
-  /* __INTEL_COMPILER = VRP prior to 2021, and then VVVV for 2021 and later,
-     except that a few beta releases use the old format with V=2021.  */
-# if __INTEL_COMPILER < 2021 || __INTEL_COMPILER == 202110 || __INTEL_COMPILER == 202111
-#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100)
-#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10)
-#  if defined(__INTEL_COMPILER_UPDATE)
-#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER_UPDATE)
-#  else
-#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER   % 10)
-#  endif
-# else
-#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER)
-#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER_UPDATE)
-   /* The third version component from --version is an update index,
-      but no macro is provided for it.  */
-#  define COMPILER_VERSION_PATCH DEC(0)
-# endif
-# if defined(__INTEL_COMPILER_BUILD_DATE)
-   /* __INTEL_COMPILER_BUILD_DATE = YYYYMMDD */
-#  define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE)
-# endif
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-# if defined(__GNUC__)
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-# elif defined(__GNUG__)
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
-# endif
-# if defined(__GNUC_MINOR__)
-#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-# endif
-# if defined(__GNUC_PATCHLEVEL__)
-#  define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-# endif
-
-#elif (defined(__clang__) && defined(__INTEL_CLANG_COMPILER)) || defined(__INTEL_LLVM_COMPILER)
-# define COMPILER_ID "IntelLLVM"
-#if defined(_MSC_VER)
-# define SIMULATE_ID "MSVC"
-#endif
-#if defined(__GNUC__)
-# define SIMULATE_ID "GNU"
-#endif
-/* __INTEL_LLVM_COMPILER = VVVVRP prior to 2021.2.0, VVVVRRPP for 2021.2.0 and
- * later.  Look for 6 digit vs. 8 digit version number to decide encoding.
- * VVVV is no smaller than the current year when a version is released.
- */
-#if __INTEL_LLVM_COMPILER < 1000000L
-# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/100)
-# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER    % 10)
-#else
-# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/10000)
-# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/100 % 100)
-# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER     % 100)
-#endif
-#if defined(_MSC_VER)
-  /* _MSC_VER = VVRR */
-# define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-# define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-#endif
-#if defined(__GNUC__)
-# define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-#elif defined(__GNUG__)
-# define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
-#endif
-#if defined(__GNUC_MINOR__)
-# define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-#endif
-#if defined(__GNUC_PATCHLEVEL__)
-# define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-#endif
-
-#elif defined(__PATHCC__)
-# define COMPILER_ID "PathScale"
-# define COMPILER_VERSION_MAJOR DEC(__PATHCC__)
-# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__)
-# if defined(__PATHCC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__)
-# endif
-
-#elif defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__)
-# define COMPILER_ID "Embarcadero"
-# define COMPILER_VERSION_MAJOR HEX(__CODEGEARC_VERSION__>>24 & 0x00FF)
-# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF)
-# define COMPILER_VERSION_PATCH DEC(__CODEGEARC_VERSION__     & 0xFFFF)
-
-#elif defined(__BORLANDC__)
-# define COMPILER_ID "Borland"
-  /* __BORLANDC__ = 0xVRR */
-# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8)
-# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF)
-
-#elif defined(__WATCOMC__) && __WATCOMC__ < 1200
-# define COMPILER_ID "Watcom"
-   /* __WATCOMC__ = VVRR */
-# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100)
-# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
-# if (__WATCOMC__ % 10) > 0
-#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
-# endif
-
-#elif defined(__WATCOMC__)
-# define COMPILER_ID "OpenWatcom"
-   /* __WATCOMC__ = VVRP + 1100 */
-# define COMPILER_VERSION_MAJOR DEC((__WATCOMC__ - 1100) / 100)
-# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
-# if (__WATCOMC__ % 10) > 0
-#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
-# endif
-
-#elif defined(__SUNPRO_C)
-# define COMPILER_ID "SunPro"
-# if __SUNPRO_C >= 0x5100
-   /* __SUNPRO_C = 0xVRRP */
-#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>12)
-#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xFF)
-#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_C    & 0xF)
-# else
-   /* __SUNPRO_CC = 0xVRP */
-#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>8)
-#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xF)
-#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_C    & 0xF)
-# endif
-
-#elif defined(__HP_cc)
-# define COMPILER_ID "HP"
-  /* __HP_cc = VVRRPP */
-# define COMPILER_VERSION_MAJOR DEC(__HP_cc/10000)
-# define COMPILER_VERSION_MINOR DEC(__HP_cc/100 % 100)
-# define COMPILER_VERSION_PATCH DEC(__HP_cc     % 100)
-
-#elif defined(__DECC)
-# define COMPILER_ID "Compaq"
-  /* __DECC_VER = VVRRTPPPP */
-# define COMPILER_VERSION_MAJOR DEC(__DECC_VER/10000000)
-# define COMPILER_VERSION_MINOR DEC(__DECC_VER/100000  % 100)
-# define COMPILER_VERSION_PATCH DEC(__DECC_VER         % 10000)
-
-#elif defined(__IBMC__) && defined(__COMPILER_VER__)
-# define COMPILER_ID "zOS"
-  /* __IBMC__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
-
-#elif defined(__open_xl__) && defined(__clang__)
-# define COMPILER_ID "IBMClang"
-# define COMPILER_VERSION_MAJOR DEC(__open_xl_version__)
-# define COMPILER_VERSION_MINOR DEC(__open_xl_release__)
-# define COMPILER_VERSION_PATCH DEC(__open_xl_modification__)
-# define COMPILER_VERSION_TWEAK DEC(__open_xl_ptf_fix_level__)
-
-
-#elif defined(__ibmxl__) && defined(__clang__)
-# define COMPILER_ID "XLClang"
-# define COMPILER_VERSION_MAJOR DEC(__ibmxl_version__)
-# define COMPILER_VERSION_MINOR DEC(__ibmxl_release__)
-# define COMPILER_VERSION_PATCH DEC(__ibmxl_modification__)
-# define COMPILER_VERSION_TWEAK DEC(__ibmxl_ptf_fix_level__)
-
-
-#elif defined(__IBMC__) && !defined(__COMPILER_VER__) && __IBMC__ >= 800
-# define COMPILER_ID "XL"
-  /* __IBMC__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
-
-#elif defined(__IBMC__) && !defined(__COMPILER_VER__) && __IBMC__ < 800
-# define COMPILER_ID "VisualAge"
-  /* __IBMC__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
-
-#elif defined(__NVCOMPILER)
-# define COMPILER_ID "NVHPC"
-# define COMPILER_VERSION_MAJOR DEC(__NVCOMPILER_MAJOR__)
-# define COMPILER_VERSION_MINOR DEC(__NVCOMPILER_MINOR__)
-# if defined(__NVCOMPILER_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__NVCOMPILER_PATCHLEVEL__)
-# endif
-
-#elif defined(__PGI)
-# define COMPILER_ID "PGI"
-# define COMPILER_VERSION_MAJOR DEC(__PGIC__)
-# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__)
-# if defined(__PGIC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__)
-# endif
-
-#elif defined(__clang__) && defined(__cray__)
-# define COMPILER_ID "CrayClang"
-# define COMPILER_VERSION_MAJOR DEC(__cray_major__)
-# define COMPILER_VERSION_MINOR DEC(__cray_minor__)
-# define COMPILER_VERSION_PATCH DEC(__cray_patchlevel__)
-# define COMPILER_VERSION_INTERNAL_STR __clang_version__
-
-
-#elif defined(_CRAYC)
-# define COMPILER_ID "Cray"
-# define COMPILER_VERSION_MAJOR DEC(_RELEASE_MAJOR)
-# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR)
-
-#elif defined(__TI_COMPILER_VERSION__)
-# define COMPILER_ID "TI"
-  /* __TI_COMPILER_VERSION__ = VVVRRRPPP */
-# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000)
-# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000   % 1000)
-# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__        % 1000)
-
-#elif defined(__CLANG_FUJITSU)
-# define COMPILER_ID "FujitsuClang"
-# define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
-# define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
-# define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
-# define COMPILER_VERSION_INTERNAL_STR __clang_version__
-
-
-#elif defined(__FUJITSU)
-# define COMPILER_ID "Fujitsu"
-# if defined(__FCC_version__)
-#   define COMPILER_VERSION __FCC_version__
-# elif defined(__FCC_major__)
-#   define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
-#   define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
-#   define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
-# endif
-# if defined(__fcc_version)
-#   define COMPILER_VERSION_INTERNAL DEC(__fcc_version)
-# elif defined(__FCC_VERSION)
-#   define COMPILER_VERSION_INTERNAL DEC(__FCC_VERSION)
-# endif
-
-
-#elif defined(__ghs__)
-# define COMPILER_ID "GHS"
-/* __GHS_VERSION_NUMBER = VVVVRP */
-# ifdef __GHS_VERSION_NUMBER
-# define COMPILER_VERSION_MAJOR DEC(__GHS_VERSION_NUMBER / 100)
-# define COMPILER_VERSION_MINOR DEC(__GHS_VERSION_NUMBER / 10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__GHS_VERSION_NUMBER      % 10)
-# endif
-
-#elif defined(__TASKING__)
-# define COMPILER_ID "Tasking"
-  # define COMPILER_VERSION_MAJOR DEC(__VERSION__/1000)
-  # define COMPILER_VERSION_MINOR DEC(__VERSION__ % 100)
-# define COMPILER_VERSION_INTERNAL DEC(__VERSION__)
-
-#elif defined(__ORANGEC__)
-# define COMPILER_ID "OrangeC"
-# define COMPILER_VERSION_MAJOR DEC(__ORANGEC_MAJOR__)
-# define COMPILER_VERSION_MINOR DEC(__ORANGEC_MINOR__)
-# define COMPILER_VERSION_PATCH DEC(__ORANGEC_PATCHLEVEL__)
-
-#elif defined(__TINYC__)
-# define COMPILER_ID "TinyCC"
-
-#elif defined(__BCC__)
-# define COMPILER_ID "Bruce"
-
-#elif defined(__SCO_VERSION__)
-# define COMPILER_ID "SCO"
-
-#elif defined(__ARMCC_VERSION) && !defined(__clang__)
-# define COMPILER_ID "ARMCC"
-#if __ARMCC_VERSION >= 1000000
-  /* __ARMCC_VERSION = VRRPPPP */
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/1000000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 100)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION     % 10000)
-#else
-  /* __ARMCC_VERSION = VRPPPP */
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/100000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 10)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION    % 10000)
-#endif
-
-
-#elif defined(__clang__) && defined(__apple_build_version__)
-# define COMPILER_ID "AppleClang"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
-# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
-# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-# define COMPILER_VERSION_TWEAK DEC(__apple_build_version__)
-
-#elif defined(__clang__) && defined(__ARMCOMPILER_VERSION)
-# define COMPILER_ID "ARMClang"
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCOMPILER_VERSION/1000000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCOMPILER_VERSION/10000 % 100)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCOMPILER_VERSION/100   % 100)
-# define COMPILER_VERSION_INTERNAL DEC(__ARMCOMPILER_VERSION)
-
-#elif defined(__clang__) && defined(__ti__)
-# define COMPILER_ID "TIClang"
-  # define COMPILER_VERSION_MAJOR DEC(__ti_major__)
-  # define COMPILER_VERSION_MINOR DEC(__ti_minor__)
-  # define COMPILER_VERSION_PATCH DEC(__ti_patchlevel__)
-# define COMPILER_VERSION_INTERNAL DEC(__ti_version__)
-
-#elif defined(__clang__)
-# define COMPILER_ID "Clang"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
-# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
-# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-
-#elif defined(__LCC__) && (defined(__GNUC__) || defined(__GNUG__) || defined(__MCST__))
-# define COMPILER_ID "LCC"
-# define COMPILER_VERSION_MAJOR DEC(__LCC__ / 100)
-# define COMPILER_VERSION_MINOR DEC(__LCC__ % 100)
-# if defined(__LCC_MINOR__)
-#  define COMPILER_VERSION_PATCH DEC(__LCC_MINOR__)
-# endif
-# if defined(__GNUC__) && defined(__GNUC_MINOR__)
-#  define SIMULATE_ID "GNU"
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-#  if defined(__GNUC_PATCHLEVEL__)
-#   define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-#  endif
-# endif
-
-#elif defined(__GNUC__)
-# define COMPILER_ID "GNU"
-# define COMPILER_VERSION_MAJOR DEC(__GNUC__)
-# if defined(__GNUC_MINOR__)
-#  define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__)
-# endif
-# if defined(__GNUC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-# endif
-
-#elif defined(_MSC_VER)
-# define COMPILER_ID "MSVC"
-  /* _MSC_VER = VVRR */
-# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100)
-# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100)
-# if defined(_MSC_FULL_VER)
-#  if _MSC_VER >= 1400
-    /* _MSC_FULL_VER = VVRRPPPPP */
-#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000)
-#  else
-    /* _MSC_FULL_VER = VVRRPPPP */
-#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000)
-#  endif
-# endif
-# if defined(_MSC_BUILD)
-#  define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD)
-# endif
-
-#elif defined(_ADI_COMPILER)
-# define COMPILER_ID "ADSP"
-#if defined(__VERSIONNUM__)
-  /* __VERSIONNUM__ = 0xVVRRPPTT */
-#  define COMPILER_VERSION_MAJOR DEC(__VERSIONNUM__ >> 24 & 0xFF)
-#  define COMPILER_VERSION_MINOR DEC(__VERSIONNUM__ >> 16 & 0xFF)
-#  define COMPILER_VERSION_PATCH DEC(__VERSIONNUM__ >> 8 & 0xFF)
-#  define COMPILER_VERSION_TWEAK DEC(__VERSIONNUM__ & 0xFF)
-#endif
-
-#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
-# define COMPILER_ID "IAR"
-# if defined(__VER__) && defined(__ICCARM__)
-#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 1000000)
-#  define COMPILER_VERSION_MINOR DEC(((__VER__) / 1000) % 1000)
-#  define COMPILER_VERSION_PATCH DEC((__VER__) % 1000)
-#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
-# elif defined(__VER__) && (defined(__ICCAVR__) || defined(__ICCRX__) || defined(__ICCRH850__) || defined(__ICCRL78__) || defined(__ICC430__) || defined(__ICCRISCV__) || defined(__ICCV850__) || defined(__ICC8051__) || defined(__ICCSTM8__))
-#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 100)
-#  define COMPILER_VERSION_MINOR DEC((__VER__) - (((__VER__) / 100)*100))
-#  define COMPILER_VERSION_PATCH DEC(__SUBVERSION__)
-#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
-# endif
-
-#elif defined(__SDCC_VERSION_MAJOR) || defined(SDCC)
-# define COMPILER_ID "SDCC"
-# if defined(__SDCC_VERSION_MAJOR)
-#  define COMPILER_VERSION_MAJOR DEC(__SDCC_VERSION_MAJOR)
-#  define COMPILER_VERSION_MINOR DEC(__SDCC_VERSION_MINOR)
-#  define COMPILER_VERSION_PATCH DEC(__SDCC_VERSION_PATCH)
-# else
-  /* SDCC = VRP */
-#  define COMPILER_VERSION_MAJOR DEC(SDCC/100)
-#  define COMPILER_VERSION_MINOR DEC(SDCC/10 % 10)
-#  define COMPILER_VERSION_PATCH DEC(SDCC    % 10)
-# endif
-
-
-/* These compilers are either not known or too old to define an
-  identification macro.  Try to identify the platform and guess that
-  it is the native compiler.  */
-#elif defined(__hpux) || defined(__hpua)
-# define COMPILER_ID "HP"
-
-#else /* unknown compiler */
-# define COMPILER_ID ""
-#endif
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
-#ifdef SIMULATE_ID
-char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
-#endif
-
-#ifdef __QNXNTO__
-char const* qnxnto = "INFO" ":" "qnxnto[]";
-#endif
-
-#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
-char const *info_cray = "INFO" ":" "compiler_wrapper[CrayPrgEnv]";
-#endif
-
-#define STRINGIFY_HELPER(X) #X
-#define STRINGIFY(X) STRINGIFY_HELPER(X)
-
-/* Identify known platforms by name.  */
-#if defined(__linux) || defined(__linux__) || defined(linux)
-# define PLATFORM_ID "Linux"
-
-#elif defined(__MSYS__)
-# define PLATFORM_ID "MSYS"
-
-#elif defined(__CYGWIN__)
-# define PLATFORM_ID "Cygwin"
-
-#elif defined(__MINGW32__)
-# define PLATFORM_ID "MinGW"
-
-#elif defined(__APPLE__)
-# define PLATFORM_ID "Darwin"
-
-#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
-# define PLATFORM_ID "Windows"
-
-#elif defined(__FreeBSD__) || defined(__FreeBSD)
-# define PLATFORM_ID "FreeBSD"
-
-#elif defined(__NetBSD__) || defined(__NetBSD)
-# define PLATFORM_ID "NetBSD"
-
-#elif defined(__OpenBSD__) || defined(__OPENBSD)
-# define PLATFORM_ID "OpenBSD"
-
-#elif defined(__sun) || defined(sun)
-# define PLATFORM_ID "SunOS"
-
-#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
-# define PLATFORM_ID "AIX"
-
-#elif defined(__hpux) || defined(__hpux__)
-# define PLATFORM_ID "HP-UX"
-
-#elif defined(__HAIKU__)
-# define PLATFORM_ID "Haiku"
-
-#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
-# define PLATFORM_ID "BeOS"
-
-#elif defined(__QNX__) || defined(__QNXNTO__)
-# define PLATFORM_ID "QNX"
-
-#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
-# define PLATFORM_ID "Tru64"
-
-#elif defined(__riscos) || defined(__riscos__)
-# define PLATFORM_ID "RISCos"
-
-#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
-# define PLATFORM_ID "SINIX"
-
-#elif defined(__UNIX_SV__)
-# define PLATFORM_ID "UNIX_SV"
-
-#elif defined(__bsdos__)
-# define PLATFORM_ID "BSDOS"
-
-#elif defined(_MPRAS) || defined(MPRAS)
-# define PLATFORM_ID "MP-RAS"
-
-#elif defined(__osf) || defined(__osf__)
-# define PLATFORM_ID "OSF1"
-
-#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
-# define PLATFORM_ID "SCO_SV"
-
-#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
-# define PLATFORM_ID "ULTRIX"
-
-#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
-# define PLATFORM_ID "Xenix"
-
-#elif defined(__WATCOMC__)
-# if defined(__LINUX__)
-#  define PLATFORM_ID "Linux"
-
-# elif defined(__DOS__)
-#  define PLATFORM_ID "DOS"
-
-# elif defined(__OS2__)
-#  define PLATFORM_ID "OS2"
-
-# elif defined(__WINDOWS__)
-#  define PLATFORM_ID "Windows3x"
-
-# elif defined(__VXWORKS__)
-#  define PLATFORM_ID "VxWorks"
-
-# else /* unknown platform */
-#  define PLATFORM_ID
-# endif
-
-#elif defined(__INTEGRITY)
-# if defined(INT_178B)
-#  define PLATFORM_ID "Integrity178"
-
-# else /* regular Integrity */
-#  define PLATFORM_ID "Integrity"
-# endif
-
-# elif defined(_ADI_COMPILER)
-#  define PLATFORM_ID "ADSP"
-
-#else /* unknown platform */
-# define PLATFORM_ID
-
-#endif
-
-/* For windows compilers MSVC and Intel we can determine
-   the architecture of the compiler being used.  This is because
-   the compilers do not have flags that can change the architecture,
-   but rather depend on which compiler is being used
-*/
-#if defined(_WIN32) && defined(_MSC_VER)
-# if defined(_M_IA64)
-#  define ARCHITECTURE_ID "IA64"
-
-# elif defined(_M_ARM64EC)
-#  define ARCHITECTURE_ID "ARM64EC"
-
-# elif defined(_M_X64) || defined(_M_AMD64)
-#  define ARCHITECTURE_ID "x64"
-
-# elif defined(_M_IX86)
-#  define ARCHITECTURE_ID "X86"
-
-# elif defined(_M_ARM64)
-#  define ARCHITECTURE_ID "ARM64"
-
-# elif defined(_M_ARM)
-#  if _M_ARM == 4
-#   define ARCHITECTURE_ID "ARMV4I"
-#  elif _M_ARM == 5
-#   define ARCHITECTURE_ID "ARMV5I"
-#  else
-#   define ARCHITECTURE_ID "ARMV" STRINGIFY(_M_ARM)
-#  endif
-
-# elif defined(_M_MIPS)
-#  define ARCHITECTURE_ID "MIPS"
-
-# elif defined(_M_SH)
-#  define ARCHITECTURE_ID "SHx"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__WATCOMC__)
-# if defined(_M_I86)
-#  define ARCHITECTURE_ID "I86"
-
-# elif defined(_M_IX86)
-#  define ARCHITECTURE_ID "X86"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
-# if defined(__ICCARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__ICCRX__)
-#  define ARCHITECTURE_ID "RX"
-
-# elif defined(__ICCRH850__)
-#  define ARCHITECTURE_ID "RH850"
-
-# elif defined(__ICCRL78__)
-#  define ARCHITECTURE_ID "RL78"
-
-# elif defined(__ICCRISCV__)
-#  define ARCHITECTURE_ID "RISCV"
-
-# elif defined(__ICCAVR__)
-#  define ARCHITECTURE_ID "AVR"
-
-# elif defined(__ICC430__)
-#  define ARCHITECTURE_ID "MSP430"
-
-# elif defined(__ICCV850__)
-#  define ARCHITECTURE_ID "V850"
-
-# elif defined(__ICC8051__)
-#  define ARCHITECTURE_ID "8051"
-
-# elif defined(__ICCSTM8__)
-#  define ARCHITECTURE_ID "STM8"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__ghs__)
-# if defined(__PPC64__)
-#  define ARCHITECTURE_ID "PPC64"
-
-# elif defined(__ppc__)
-#  define ARCHITECTURE_ID "PPC"
-
-# elif defined(__ARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__x86_64__)
-#  define ARCHITECTURE_ID "x64"
-
-# elif defined(__i386__)
-#  define ARCHITECTURE_ID "X86"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__clang__) && defined(__ti__)
-# if defined(__ARM_ARCH)
-#  define ARCHITECTURE_ID "Arm"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__TI_COMPILER_VERSION__)
-# if defined(__TI_ARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__MSP430__)
-#  define ARCHITECTURE_ID "MSP430"
-
-# elif defined(__TMS320C28XX__)
-#  define ARCHITECTURE_ID "TMS320C28x"
-
-# elif defined(__TMS320C6X__) || defined(_TMS320C6X)
-#  define ARCHITECTURE_ID "TMS320C6x"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-# elif defined(__ADSPSHARC__)
-#  define ARCHITECTURE_ID "SHARC"
-
-# elif defined(__ADSPBLACKFIN__)
-#  define ARCHITECTURE_ID "Blackfin"
-
-#elif defined(__TASKING__)
-
-# if defined(__CTC__) || defined(__CPTC__)
-#  define ARCHITECTURE_ID "TriCore"
-
-# elif defined(__CMCS__)
-#  define ARCHITECTURE_ID "MCS"
-
-# elif defined(__CARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__CARC__)
-#  define ARCHITECTURE_ID "ARC"
-
-# elif defined(__C51__)
-#  define ARCHITECTURE_ID "8051"
-
-# elif defined(__CPCP__)
-#  define ARCHITECTURE_ID "PCP"
-
-# else
-#  define ARCHITECTURE_ID ""
-# endif
-
-#else
-#  define ARCHITECTURE_ID
-#endif
-
-/* Convert integer to decimal digit literals.  */
-#define DEC(n)                   \
-  ('0' + (((n) / 10000000)%10)), \
-  ('0' + (((n) / 1000000)%10)),  \
-  ('0' + (((n) / 100000)%10)),   \
-  ('0' + (((n) / 10000)%10)),    \
-  ('0' + (((n) / 1000)%10)),     \
-  ('0' + (((n) / 100)%10)),      \
-  ('0' + (((n) / 10)%10)),       \
-  ('0' +  ((n) % 10))
-
-/* Convert integer to hex digit literals.  */
-#define HEX(n)             \
-  ('0' + ((n)>>28 & 0xF)), \
-  ('0' + ((n)>>24 & 0xF)), \
-  ('0' + ((n)>>20 & 0xF)), \
-  ('0' + ((n)>>16 & 0xF)), \
-  ('0' + ((n)>>12 & 0xF)), \
-  ('0' + ((n)>>8  & 0xF)), \
-  ('0' + ((n)>>4  & 0xF)), \
-  ('0' + ((n)     & 0xF))
-
-/* Construct a string literal encoding the version number. */
-#ifdef COMPILER_VERSION
-char const* info_version = "INFO" ":" "compiler_version[" COMPILER_VERSION "]";
-
-/* Construct a string literal encoding the version number components. */
-#elif defined(COMPILER_VERSION_MAJOR)
-char const info_version[] = {
-  'I', 'N', 'F', 'O', ':',
-  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[',
-  COMPILER_VERSION_MAJOR,
-# ifdef COMPILER_VERSION_MINOR
-  '.', COMPILER_VERSION_MINOR,
-#  ifdef COMPILER_VERSION_PATCH
-   '.', COMPILER_VERSION_PATCH,
-#   ifdef COMPILER_VERSION_TWEAK
-    '.', COMPILER_VERSION_TWEAK,
-#   endif
-#  endif
-# endif
-  ']','\0'};
-#endif
-
-/* Construct a string literal encoding the internal version number. */
-#ifdef COMPILER_VERSION_INTERNAL
-char const info_version_internal[] = {
-  'I', 'N', 'F', 'O', ':',
-  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','_',
-  'i','n','t','e','r','n','a','l','[',
-  COMPILER_VERSION_INTERNAL,']','\0'};
-#elif defined(COMPILER_VERSION_INTERNAL_STR)
-char const* info_version_internal = "INFO" ":" "compiler_version_internal[" COMPILER_VERSION_INTERNAL_STR "]";
-#endif
-
-/* Construct a string literal encoding the version number components. */
-#ifdef SIMULATE_VERSION_MAJOR
-char const info_simulate_version[] = {
-  'I', 'N', 'F', 'O', ':',
-  's','i','m','u','l','a','t','e','_','v','e','r','s','i','o','n','[',
-  SIMULATE_VERSION_MAJOR,
-# ifdef SIMULATE_VERSION_MINOR
-  '.', SIMULATE_VERSION_MINOR,
-#  ifdef SIMULATE_VERSION_PATCH
-   '.', SIMULATE_VERSION_PATCH,
-#   ifdef SIMULATE_VERSION_TWEAK
-    '.', SIMULATE_VERSION_TWEAK,
-#   endif
-#  endif
-# endif
-  ']','\0'};
-#endif
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]";
-char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]";
-
-
-
-#define C_STD_99 199901L
-#define C_STD_11 201112L
-#define C_STD_17 201710L
-#define C_STD_23 202311L
-
-#ifdef __STDC_VERSION__
-#  define C_STD __STDC_VERSION__
-#endif
-
-#if !defined(__STDC__) && !defined(__clang__)
-# if defined(_MSC_VER) || defined(__ibmxl__) || defined(__IBMC__)
-#  define C_VERSION "90"
-# else
-#  define C_VERSION
-# endif
-#elif C_STD > C_STD_17
-# define C_VERSION "23"
-#elif C_STD > C_STD_11
-# define C_VERSION "17"
-#elif C_STD > C_STD_99
-# define C_VERSION "11"
-#elif C_STD >= C_STD_99
-# define C_VERSION "99"
-#else
-# define C_VERSION "90"
-#endif
-const char* info_language_standard_default =
-  "INFO" ":" "standard_default[" C_VERSION "]";
-
-const char* info_language_extensions_default = "INFO" ":" "extensions_default["
-#if (defined(__clang__) || defined(__GNUC__) || defined(__xlC__) ||           \
-     defined(__TI_COMPILER_VERSION__)) &&                                     \
-  !defined(__STRICT_ANSI__)
-  "ON"
-#else
-  "OFF"
-#endif
-"]";
-
-/*--------------------------------------------------------------------------*/
-
-#ifdef ID_VOID_MAIN
-void main() {}
-#else
-# if defined(__CLASSIC_C__)
-int main(argc, argv) int argc; char *argv[];
-# else
-int main(int argc, char* argv[])
-# endif
-{
-  int require = 0;
-  require += info_compiler[argc];
-  require += info_platform[argc];
-  require += info_arch[argc];
-#ifdef COMPILER_VERSION_MAJOR
-  require += info_version[argc];
-#endif
-#ifdef COMPILER_VERSION_INTERNAL
-  require += info_version_internal[argc];
-#endif
-#ifdef SIMULATE_ID
-  require += info_simulate[argc];
-#endif
-#ifdef SIMULATE_VERSION_MAJOR
-  require += info_simulate_version[argc];
-#endif
-#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
-  require += info_cray[argc];
-#endif
-  require += info_language_standard_default[argc];
-  require += info_language_extensions_default[argc];
-  (void)argv;
-  return require;
-}
-#endif
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
deleted file mode 100755
index 37746a787a5774e617e8abfcaacf5381d6be0900..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 15560
zcmeHOYit}>6~4R9!zpoh<JPX56f!g@awR-oJC513q+LJO8B2bY)Dc1^9gV$Xd&PR!
z?2f@HY8w$KF=<eF2#N$K5<-GXAXS2jAE-D=RT>FUf`n962)RHZpg@BP$c4zuIdjjq
z8Bf<O>YoZ}uH`xReD{3k-Z^(3cW2H#njIO6$6^YlLEWoZGm;v~NW%*Ur9vX3(yEEJ
zcc?vT8|hnoOt)vWpjKU8jBk{Uf;W(4UK>~H$U8JledvM_vSi+7Wq}7o1yad=FmEe2
zh#r=|kPaZxUhB_bG8Mz$*5n6;2N~q?P?Dy$Pu{yxwo6=6BEe&od4})|;X$60{vZ)g
zjtT##C7xlKp*AiVf2&lOw<Nr<929#<?t{w%uXwq))8GBV`?=w}QDKSshD3iKBA!gG
zCcecM(|lC=+iV`LNjxD%Rh@<WRBumbA=gpJ7Z;a0meRc)y**~7WOn;K^SDy<&&Sk}
zv12NJQmrrseoVzS=yB1>#4l`nEB$lWnSamYzklRU7rj4r9@_Wm%fET=Q^zVlSYsRB
z5BAA6To~hj6mG*mu>VCer@4;d0AWTQ+};E)Zi3%J_?>n9DBGsUPTLjFDSP(3lP?l7
zz2w+4`Jz+EKjbQI<~aANBO}B819rFBZ62)E5A-N|cw*Gfxn*}YU-8`X#OOewRCFht
zse((sX6H*q@osC=x`s;8jQD^0z>ks6<Hd2axI4dtXXpKb{qT!lrNb{yS3X^EKI1$}
z?$UUhoUg!F#9?Dbw*!Zs4B>{M?b<?kS#TqSe@^iB5dLMsQz88Og0I}C{KDrH9}6fi
z1n@XOl9vLwTq^w57Xx_kxLgh3{&hFtE2>5jh$0Y0Ac{Z~fhYn|1fmGMa}jtg@t%KM
zr>-_yXSSa2RLc77iWje5vQ9nMc)=eOw|D(@c=_^!*7EPHQ-8R2|3tQHrR$<~_V7z&
zP;L1XvHme*CiZ^Dw<r8%_H%aYODqnpc`fAnL2<pKx|-N~k_|72B>Sg*`-4xhxNF^7
zzGj{O+kMvgwFWEpymfiqyOkVth=a!J>P%wq;0->H@8scmYF3K}j#;M;-^5jG`4z9p
zI&*kGDb<!W`YnBBx>~J1zjcs+*zpTD#(QDrMm@1NquAe{XUX;$`B;AVs<phh`m^kH
z9<p_&<+tSNO!lhvq!qiAct$0jU5RC{6aLFh@Mr7c+QHeD^EWG%cxFqo=H<zH*5v(k
zJ^W1e`f-|~+WggKjE5SPC<0Lgq6kD0h$0Y0Ac{Z~fhYn|1fmE;5r`tNF#`PF>&?pW
z*wFah)1~=^e8DYG(p$*m8?86A+n;dDm3*l<net0lkEtuEZdAICE1$7YaJ-pPd46()
z->wSil&9w=rB3e$i#ey9qZfTM&SJrv?D~MTxJ#Z}<X$SZw(&84RIxn`_q5UQc#kGt
ztyX(Tj$W%)M@aI!RxYuJj;h#FGPY;u_QogZ#TVoJuDOlu_p`y^cK?kXW6Xb@@b56*
zcXRTw_(0RP_&H)S5S1tbQ3Rq0L=lK05Je!0Koo%}0#O8_2>gFX0C|kaTSRW)ow8dy
zv3ru&*d+Rj<UignI`Sj;h>o93yG2KyB=UUG{?GMliA`1{$q>1N3zA&O`HEatrTr$Y
zs?#FhC6a#!a%s_`w%snZv^Yk;Y1vUq`t%F<|EcQn5a^q(i{2=FdQ<F=7jdGWo4)QR
z?-J>C*lV}%*cSQYn+*W@sD_~}kZ+3oQsk2&fAq+}z}-eWJrB6cpr85OW|z^O>h4LU
zQ<SP(zv)m{YO~G>=lE?=f3MavsfY9L_L#awh4<^-zJo+9uN?lk?-(5oS0pbL_z+c^
zp#<bK)s29T>KA;xRjCXREgvP3RIMr<!XG2NIo_mjerRi@9vAztpRW^cz$hTUOZ8px
zR)u*&(~lTelu2M{1Ub0R`FN`e=Mn!(@Ni!6YlJ7&Z7P$YN}zm+>dk6r?R${@(zZr&
z7wvB{qXC>p+h`)$PdE<EgtMR9<vQU%Qz7bYg!6ud?e{TG{=<3A{e&C3%MII)5{_$B
zu;G)0H^=F!AlECjJxn;qEn{e;TN*y^<E_fbXaM`A21cEaxdQ|8By2cmPAhxxBV&D|
z!vmCcPA7t$wd|pzeWO|18a%4(BO~MeeIxex(9i?f345Zie<Vx!=;7q|407DxDzDwm
zIi909OFmCtSkX!DZ^(GJbCr@kM-R_98-944taACHy;yN`Dqox_*?97%wSrTeU36w$
z`;AZ4l<gLUgXe$L*;J(>9ZT*$rQh4xu|eAoISfC*dy`!JjUNEiLc(ePHtnycJ<GF2
zt?;8lrOe8SdC!?5>6NvdLoHvVPXiW|SuA<3Ia^#b7s{mtx9pt=KvRo(`o1Hd6R59$
zxWjX1m2W=hROXbKJ5i)AwDiil1>^9|M6s!@>=qm*DAOOa=}}0P=}(whF8R}Ex^wnS
z*_n6kxg0T|X@>2T%MJ~X8K{#xXFfko9hb-#ZOnxNRkSmj3T4vN%)3QTj^4K~_&!aC
ze(h;+o7`U^ai2yHY#S{5Na1^HT)?#OAv1zQ)XpmbdPxTPOTveIABZAxodY}^;(tT<
zkOmAzhWQ^R{9kmh#`v-RfW-c96MlI74&l7^03YiU$R~uy`^d2aAM1=fVLW8;vEG3^
zO>Myvj{nE0k=G*NWBmb%bsNSHJIF_f&ubg#Sl>Y6-W?u4#&nh{98>VIzN$$XF!~Sg
z|JR7iCTOo+ujRUpbtIYiB|LxMBs9o3ga`SpP{5>FyeakV5PwDPQ;=Baf)MWid&0;5
zD?=<rUKABVV5sV8s__uP-|V|M5W@ZcG{nDRXiLZm5Je*XfO&khitvv?#;|_JcXMHT
z=#alAP9ng^`o4{F7rDSrYd3V@FH-~0y_~kSbsfHgJSX$V#~&B)FpqyBj7`AD_f0FE
zY^_wg7PT$-kgrlpkdJlZ72)GNg#+*)c|8>5tBhEtv`mW%0Uq>qsxXG}V?C4>e%M~Z
z0lI1+fH5(z;o$T2HCVt8N*sGZy9IIhV`<z?jXX~n58|?eFpNFOZ$F^5ub?Ao45_ph
RtIz)lzl5W*Geiif>c5;{)EEE&

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
deleted file mode 100644
index da6c824af3a..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
+++ /dev/null
@@ -1,919 +0,0 @@
-/* This source file must have a .cpp extension so that all C++ compilers
-   recognize the extension without flags.  Borland does not know .cxx for
-   example.  */
-#ifndef __cplusplus
-# error "A C compiler has been selected for C++."
-#endif
-
-#if !defined(__has_include)
-/* If the compiler does not have __has_include, pretend the answer is
-   always no.  */
-#  define __has_include(x) 0
-#endif
-
-
-/* Version number components: V=Version, R=Revision, P=Patch
-   Version date components:   YYYY=Year, MM=Month,   DD=Day  */
-
-#if defined(__INTEL_COMPILER) || defined(__ICC)
-# define COMPILER_ID "Intel"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# if defined(__GNUC__)
-#  define SIMULATE_ID "GNU"
-# endif
-  /* __INTEL_COMPILER = VRP prior to 2021, and then VVVV for 2021 and later,
-     except that a few beta releases use the old format with V=2021.  */
-# if __INTEL_COMPILER < 2021 || __INTEL_COMPILER == 202110 || __INTEL_COMPILER == 202111
-#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100)
-#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10)
-#  if defined(__INTEL_COMPILER_UPDATE)
-#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER_UPDATE)
-#  else
-#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER   % 10)
-#  endif
-# else
-#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER)
-#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER_UPDATE)
-   /* The third version component from --version is an update index,
-      but no macro is provided for it.  */
-#  define COMPILER_VERSION_PATCH DEC(0)
-# endif
-# if defined(__INTEL_COMPILER_BUILD_DATE)
-   /* __INTEL_COMPILER_BUILD_DATE = YYYYMMDD */
-#  define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE)
-# endif
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-# if defined(__GNUC__)
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-# elif defined(__GNUG__)
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
-# endif
-# if defined(__GNUC_MINOR__)
-#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-# endif
-# if defined(__GNUC_PATCHLEVEL__)
-#  define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-# endif
-
-#elif (defined(__clang__) && defined(__INTEL_CLANG_COMPILER)) || defined(__INTEL_LLVM_COMPILER)
-# define COMPILER_ID "IntelLLVM"
-#if defined(_MSC_VER)
-# define SIMULATE_ID "MSVC"
-#endif
-#if defined(__GNUC__)
-# define SIMULATE_ID "GNU"
-#endif
-/* __INTEL_LLVM_COMPILER = VVVVRP prior to 2021.2.0, VVVVRRPP for 2021.2.0 and
- * later.  Look for 6 digit vs. 8 digit version number to decide encoding.
- * VVVV is no smaller than the current year when a version is released.
- */
-#if __INTEL_LLVM_COMPILER < 1000000L
-# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/100)
-# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER    % 10)
-#else
-# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/10000)
-# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/100 % 100)
-# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER     % 100)
-#endif
-#if defined(_MSC_VER)
-  /* _MSC_VER = VVRR */
-# define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-# define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-#endif
-#if defined(__GNUC__)
-# define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-#elif defined(__GNUG__)
-# define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
-#endif
-#if defined(__GNUC_MINOR__)
-# define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-#endif
-#if defined(__GNUC_PATCHLEVEL__)
-# define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-#endif
-
-#elif defined(__PATHCC__)
-# define COMPILER_ID "PathScale"
-# define COMPILER_VERSION_MAJOR DEC(__PATHCC__)
-# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__)
-# if defined(__PATHCC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__)
-# endif
-
-#elif defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__)
-# define COMPILER_ID "Embarcadero"
-# define COMPILER_VERSION_MAJOR HEX(__CODEGEARC_VERSION__>>24 & 0x00FF)
-# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF)
-# define COMPILER_VERSION_PATCH DEC(__CODEGEARC_VERSION__     & 0xFFFF)
-
-#elif defined(__BORLANDC__)
-# define COMPILER_ID "Borland"
-  /* __BORLANDC__ = 0xVRR */
-# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8)
-# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF)
-
-#elif defined(__WATCOMC__) && __WATCOMC__ < 1200
-# define COMPILER_ID "Watcom"
-   /* __WATCOMC__ = VVRR */
-# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100)
-# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
-# if (__WATCOMC__ % 10) > 0
-#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
-# endif
-
-#elif defined(__WATCOMC__)
-# define COMPILER_ID "OpenWatcom"
-   /* __WATCOMC__ = VVRP + 1100 */
-# define COMPILER_VERSION_MAJOR DEC((__WATCOMC__ - 1100) / 100)
-# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
-# if (__WATCOMC__ % 10) > 0
-#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
-# endif
-
-#elif defined(__SUNPRO_CC)
-# define COMPILER_ID "SunPro"
-# if __SUNPRO_CC >= 0x5100
-   /* __SUNPRO_CC = 0xVRRP */
-#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>12)
-#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xFF)
-#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC    & 0xF)
-# else
-   /* __SUNPRO_CC = 0xVRP */
-#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>8)
-#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xF)
-#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC    & 0xF)
-# endif
-
-#elif defined(__HP_aCC)
-# define COMPILER_ID "HP"
-  /* __HP_aCC = VVRRPP */
-# define COMPILER_VERSION_MAJOR DEC(__HP_aCC/10000)
-# define COMPILER_VERSION_MINOR DEC(__HP_aCC/100 % 100)
-# define COMPILER_VERSION_PATCH DEC(__HP_aCC     % 100)
-
-#elif defined(__DECCXX)
-# define COMPILER_ID "Compaq"
-  /* __DECCXX_VER = VVRRTPPPP */
-# define COMPILER_VERSION_MAJOR DEC(__DECCXX_VER/10000000)
-# define COMPILER_VERSION_MINOR DEC(__DECCXX_VER/100000  % 100)
-# define COMPILER_VERSION_PATCH DEC(__DECCXX_VER         % 10000)
-
-#elif defined(__IBMCPP__) && defined(__COMPILER_VER__)
-# define COMPILER_ID "zOS"
-  /* __IBMCPP__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
-
-#elif defined(__open_xl__) && defined(__clang__)
-# define COMPILER_ID "IBMClang"
-# define COMPILER_VERSION_MAJOR DEC(__open_xl_version__)
-# define COMPILER_VERSION_MINOR DEC(__open_xl_release__)
-# define COMPILER_VERSION_PATCH DEC(__open_xl_modification__)
-# define COMPILER_VERSION_TWEAK DEC(__open_xl_ptf_fix_level__)
-
-
-#elif defined(__ibmxl__) && defined(__clang__)
-# define COMPILER_ID "XLClang"
-# define COMPILER_VERSION_MAJOR DEC(__ibmxl_version__)
-# define COMPILER_VERSION_MINOR DEC(__ibmxl_release__)
-# define COMPILER_VERSION_PATCH DEC(__ibmxl_modification__)
-# define COMPILER_VERSION_TWEAK DEC(__ibmxl_ptf_fix_level__)
-
-
-#elif defined(__IBMCPP__) && !defined(__COMPILER_VER__) && __IBMCPP__ >= 800
-# define COMPILER_ID "XL"
-  /* __IBMCPP__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
-
-#elif defined(__IBMCPP__) && !defined(__COMPILER_VER__) && __IBMCPP__ < 800
-# define COMPILER_ID "VisualAge"
-  /* __IBMCPP__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
-
-#elif defined(__NVCOMPILER)
-# define COMPILER_ID "NVHPC"
-# define COMPILER_VERSION_MAJOR DEC(__NVCOMPILER_MAJOR__)
-# define COMPILER_VERSION_MINOR DEC(__NVCOMPILER_MINOR__)
-# if defined(__NVCOMPILER_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__NVCOMPILER_PATCHLEVEL__)
-# endif
-
-#elif defined(__PGI)
-# define COMPILER_ID "PGI"
-# define COMPILER_VERSION_MAJOR DEC(__PGIC__)
-# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__)
-# if defined(__PGIC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__)
-# endif
-
-#elif defined(__clang__) && defined(__cray__)
-# define COMPILER_ID "CrayClang"
-# define COMPILER_VERSION_MAJOR DEC(__cray_major__)
-# define COMPILER_VERSION_MINOR DEC(__cray_minor__)
-# define COMPILER_VERSION_PATCH DEC(__cray_patchlevel__)
-# define COMPILER_VERSION_INTERNAL_STR __clang_version__
-
-
-#elif defined(_CRAYC)
-# define COMPILER_ID "Cray"
-# define COMPILER_VERSION_MAJOR DEC(_RELEASE_MAJOR)
-# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR)
-
-#elif defined(__TI_COMPILER_VERSION__)
-# define COMPILER_ID "TI"
-  /* __TI_COMPILER_VERSION__ = VVVRRRPPP */
-# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000)
-# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000   % 1000)
-# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__        % 1000)
-
-#elif defined(__CLANG_FUJITSU)
-# define COMPILER_ID "FujitsuClang"
-# define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
-# define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
-# define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
-# define COMPILER_VERSION_INTERNAL_STR __clang_version__
-
-
-#elif defined(__FUJITSU)
-# define COMPILER_ID "Fujitsu"
-# if defined(__FCC_version__)
-#   define COMPILER_VERSION __FCC_version__
-# elif defined(__FCC_major__)
-#   define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
-#   define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
-#   define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
-# endif
-# if defined(__fcc_version)
-#   define COMPILER_VERSION_INTERNAL DEC(__fcc_version)
-# elif defined(__FCC_VERSION)
-#   define COMPILER_VERSION_INTERNAL DEC(__FCC_VERSION)
-# endif
-
-
-#elif defined(__ghs__)
-# define COMPILER_ID "GHS"
-/* __GHS_VERSION_NUMBER = VVVVRP */
-# ifdef __GHS_VERSION_NUMBER
-# define COMPILER_VERSION_MAJOR DEC(__GHS_VERSION_NUMBER / 100)
-# define COMPILER_VERSION_MINOR DEC(__GHS_VERSION_NUMBER / 10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__GHS_VERSION_NUMBER      % 10)
-# endif
-
-#elif defined(__TASKING__)
-# define COMPILER_ID "Tasking"
-  # define COMPILER_VERSION_MAJOR DEC(__VERSION__/1000)
-  # define COMPILER_VERSION_MINOR DEC(__VERSION__ % 100)
-# define COMPILER_VERSION_INTERNAL DEC(__VERSION__)
-
-#elif defined(__ORANGEC__)
-# define COMPILER_ID "OrangeC"
-# define COMPILER_VERSION_MAJOR DEC(__ORANGEC_MAJOR__)
-# define COMPILER_VERSION_MINOR DEC(__ORANGEC_MINOR__)
-# define COMPILER_VERSION_PATCH DEC(__ORANGEC_PATCHLEVEL__)
-
-#elif defined(__SCO_VERSION__)
-# define COMPILER_ID "SCO"
-
-#elif defined(__ARMCC_VERSION) && !defined(__clang__)
-# define COMPILER_ID "ARMCC"
-#if __ARMCC_VERSION >= 1000000
-  /* __ARMCC_VERSION = VRRPPPP */
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/1000000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 100)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION     % 10000)
-#else
-  /* __ARMCC_VERSION = VRPPPP */
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/100000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 10)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION    % 10000)
-#endif
-
-
-#elif defined(__clang__) && defined(__apple_build_version__)
-# define COMPILER_ID "AppleClang"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
-# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
-# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-# define COMPILER_VERSION_TWEAK DEC(__apple_build_version__)
-
-#elif defined(__clang__) && defined(__ARMCOMPILER_VERSION)
-# define COMPILER_ID "ARMClang"
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCOMPILER_VERSION/1000000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCOMPILER_VERSION/10000 % 100)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCOMPILER_VERSION/100   % 100)
-# define COMPILER_VERSION_INTERNAL DEC(__ARMCOMPILER_VERSION)
-
-#elif defined(__clang__) && defined(__ti__)
-# define COMPILER_ID "TIClang"
-  # define COMPILER_VERSION_MAJOR DEC(__ti_major__)
-  # define COMPILER_VERSION_MINOR DEC(__ti_minor__)
-  # define COMPILER_VERSION_PATCH DEC(__ti_patchlevel__)
-# define COMPILER_VERSION_INTERNAL DEC(__ti_version__)
-
-#elif defined(__clang__)
-# define COMPILER_ID "Clang"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
-# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
-# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-
-#elif defined(__LCC__) && (defined(__GNUC__) || defined(__GNUG__) || defined(__MCST__))
-# define COMPILER_ID "LCC"
-# define COMPILER_VERSION_MAJOR DEC(__LCC__ / 100)
-# define COMPILER_VERSION_MINOR DEC(__LCC__ % 100)
-# if defined(__LCC_MINOR__)
-#  define COMPILER_VERSION_PATCH DEC(__LCC_MINOR__)
-# endif
-# if defined(__GNUC__) && defined(__GNUC_MINOR__)
-#  define SIMULATE_ID "GNU"
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-#  if defined(__GNUC_PATCHLEVEL__)
-#   define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-#  endif
-# endif
-
-#elif defined(__GNUC__) || defined(__GNUG__)
-# define COMPILER_ID "GNU"
-# if defined(__GNUC__)
-#  define COMPILER_VERSION_MAJOR DEC(__GNUC__)
-# else
-#  define COMPILER_VERSION_MAJOR DEC(__GNUG__)
-# endif
-# if defined(__GNUC_MINOR__)
-#  define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__)
-# endif
-# if defined(__GNUC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-# endif
-
-#elif defined(_MSC_VER)
-# define COMPILER_ID "MSVC"
-  /* _MSC_VER = VVRR */
-# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100)
-# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100)
-# if defined(_MSC_FULL_VER)
-#  if _MSC_VER >= 1400
-    /* _MSC_FULL_VER = VVRRPPPPP */
-#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000)
-#  else
-    /* _MSC_FULL_VER = VVRRPPPP */
-#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000)
-#  endif
-# endif
-# if defined(_MSC_BUILD)
-#  define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD)
-# endif
-
-#elif defined(_ADI_COMPILER)
-# define COMPILER_ID "ADSP"
-#if defined(__VERSIONNUM__)
-  /* __VERSIONNUM__ = 0xVVRRPPTT */
-#  define COMPILER_VERSION_MAJOR DEC(__VERSIONNUM__ >> 24 & 0xFF)
-#  define COMPILER_VERSION_MINOR DEC(__VERSIONNUM__ >> 16 & 0xFF)
-#  define COMPILER_VERSION_PATCH DEC(__VERSIONNUM__ >> 8 & 0xFF)
-#  define COMPILER_VERSION_TWEAK DEC(__VERSIONNUM__ & 0xFF)
-#endif
-
-#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
-# define COMPILER_ID "IAR"
-# if defined(__VER__) && defined(__ICCARM__)
-#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 1000000)
-#  define COMPILER_VERSION_MINOR DEC(((__VER__) / 1000) % 1000)
-#  define COMPILER_VERSION_PATCH DEC((__VER__) % 1000)
-#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
-# elif defined(__VER__) && (defined(__ICCAVR__) || defined(__ICCRX__) || defined(__ICCRH850__) || defined(__ICCRL78__) || defined(__ICC430__) || defined(__ICCRISCV__) || defined(__ICCV850__) || defined(__ICC8051__) || defined(__ICCSTM8__))
-#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 100)
-#  define COMPILER_VERSION_MINOR DEC((__VER__) - (((__VER__) / 100)*100))
-#  define COMPILER_VERSION_PATCH DEC(__SUBVERSION__)
-#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
-# endif
-
-
-/* These compilers are either not known or too old to define an
-  identification macro.  Try to identify the platform and guess that
-  it is the native compiler.  */
-#elif defined(__hpux) || defined(__hpua)
-# define COMPILER_ID "HP"
-
-#else /* unknown compiler */
-# define COMPILER_ID ""
-#endif
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
-#ifdef SIMULATE_ID
-char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
-#endif
-
-#ifdef __QNXNTO__
-char const* qnxnto = "INFO" ":" "qnxnto[]";
-#endif
-
-#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
-char const *info_cray = "INFO" ":" "compiler_wrapper[CrayPrgEnv]";
-#endif
-
-#define STRINGIFY_HELPER(X) #X
-#define STRINGIFY(X) STRINGIFY_HELPER(X)
-
-/* Identify known platforms by name.  */
-#if defined(__linux) || defined(__linux__) || defined(linux)
-# define PLATFORM_ID "Linux"
-
-#elif defined(__MSYS__)
-# define PLATFORM_ID "MSYS"
-
-#elif defined(__CYGWIN__)
-# define PLATFORM_ID "Cygwin"
-
-#elif defined(__MINGW32__)
-# define PLATFORM_ID "MinGW"
-
-#elif defined(__APPLE__)
-# define PLATFORM_ID "Darwin"
-
-#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
-# define PLATFORM_ID "Windows"
-
-#elif defined(__FreeBSD__) || defined(__FreeBSD)
-# define PLATFORM_ID "FreeBSD"
-
-#elif defined(__NetBSD__) || defined(__NetBSD)
-# define PLATFORM_ID "NetBSD"
-
-#elif defined(__OpenBSD__) || defined(__OPENBSD)
-# define PLATFORM_ID "OpenBSD"
-
-#elif defined(__sun) || defined(sun)
-# define PLATFORM_ID "SunOS"
-
-#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
-# define PLATFORM_ID "AIX"
-
-#elif defined(__hpux) || defined(__hpux__)
-# define PLATFORM_ID "HP-UX"
-
-#elif defined(__HAIKU__)
-# define PLATFORM_ID "Haiku"
-
-#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
-# define PLATFORM_ID "BeOS"
-
-#elif defined(__QNX__) || defined(__QNXNTO__)
-# define PLATFORM_ID "QNX"
-
-#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
-# define PLATFORM_ID "Tru64"
-
-#elif defined(__riscos) || defined(__riscos__)
-# define PLATFORM_ID "RISCos"
-
-#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
-# define PLATFORM_ID "SINIX"
-
-#elif defined(__UNIX_SV__)
-# define PLATFORM_ID "UNIX_SV"
-
-#elif defined(__bsdos__)
-# define PLATFORM_ID "BSDOS"
-
-#elif defined(_MPRAS) || defined(MPRAS)
-# define PLATFORM_ID "MP-RAS"
-
-#elif defined(__osf) || defined(__osf__)
-# define PLATFORM_ID "OSF1"
-
-#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
-# define PLATFORM_ID "SCO_SV"
-
-#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
-# define PLATFORM_ID "ULTRIX"
-
-#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
-# define PLATFORM_ID "Xenix"
-
-#elif defined(__WATCOMC__)
-# if defined(__LINUX__)
-#  define PLATFORM_ID "Linux"
-
-# elif defined(__DOS__)
-#  define PLATFORM_ID "DOS"
-
-# elif defined(__OS2__)
-#  define PLATFORM_ID "OS2"
-
-# elif defined(__WINDOWS__)
-#  define PLATFORM_ID "Windows3x"
-
-# elif defined(__VXWORKS__)
-#  define PLATFORM_ID "VxWorks"
-
-# else /* unknown platform */
-#  define PLATFORM_ID
-# endif
-
-#elif defined(__INTEGRITY)
-# if defined(INT_178B)
-#  define PLATFORM_ID "Integrity178"
-
-# else /* regular Integrity */
-#  define PLATFORM_ID "Integrity"
-# endif
-
-# elif defined(_ADI_COMPILER)
-#  define PLATFORM_ID "ADSP"
-
-#else /* unknown platform */
-# define PLATFORM_ID
-
-#endif
-
-/* For windows compilers MSVC and Intel we can determine
-   the architecture of the compiler being used.  This is because
-   the compilers do not have flags that can change the architecture,
-   but rather depend on which compiler is being used
-*/
-#if defined(_WIN32) && defined(_MSC_VER)
-# if defined(_M_IA64)
-#  define ARCHITECTURE_ID "IA64"
-
-# elif defined(_M_ARM64EC)
-#  define ARCHITECTURE_ID "ARM64EC"
-
-# elif defined(_M_X64) || defined(_M_AMD64)
-#  define ARCHITECTURE_ID "x64"
-
-# elif defined(_M_IX86)
-#  define ARCHITECTURE_ID "X86"
-
-# elif defined(_M_ARM64)
-#  define ARCHITECTURE_ID "ARM64"
-
-# elif defined(_M_ARM)
-#  if _M_ARM == 4
-#   define ARCHITECTURE_ID "ARMV4I"
-#  elif _M_ARM == 5
-#   define ARCHITECTURE_ID "ARMV5I"
-#  else
-#   define ARCHITECTURE_ID "ARMV" STRINGIFY(_M_ARM)
-#  endif
-
-# elif defined(_M_MIPS)
-#  define ARCHITECTURE_ID "MIPS"
-
-# elif defined(_M_SH)
-#  define ARCHITECTURE_ID "SHx"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__WATCOMC__)
-# if defined(_M_I86)
-#  define ARCHITECTURE_ID "I86"
-
-# elif defined(_M_IX86)
-#  define ARCHITECTURE_ID "X86"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
-# if defined(__ICCARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__ICCRX__)
-#  define ARCHITECTURE_ID "RX"
-
-# elif defined(__ICCRH850__)
-#  define ARCHITECTURE_ID "RH850"
-
-# elif defined(__ICCRL78__)
-#  define ARCHITECTURE_ID "RL78"
-
-# elif defined(__ICCRISCV__)
-#  define ARCHITECTURE_ID "RISCV"
-
-# elif defined(__ICCAVR__)
-#  define ARCHITECTURE_ID "AVR"
-
-# elif defined(__ICC430__)
-#  define ARCHITECTURE_ID "MSP430"
-
-# elif defined(__ICCV850__)
-#  define ARCHITECTURE_ID "V850"
-
-# elif defined(__ICC8051__)
-#  define ARCHITECTURE_ID "8051"
-
-# elif defined(__ICCSTM8__)
-#  define ARCHITECTURE_ID "STM8"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__ghs__)
-# if defined(__PPC64__)
-#  define ARCHITECTURE_ID "PPC64"
-
-# elif defined(__ppc__)
-#  define ARCHITECTURE_ID "PPC"
-
-# elif defined(__ARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__x86_64__)
-#  define ARCHITECTURE_ID "x64"
-
-# elif defined(__i386__)
-#  define ARCHITECTURE_ID "X86"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__clang__) && defined(__ti__)
-# if defined(__ARM_ARCH)
-#  define ARCHITECTURE_ID "Arm"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__TI_COMPILER_VERSION__)
-# if defined(__TI_ARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__MSP430__)
-#  define ARCHITECTURE_ID "MSP430"
-
-# elif defined(__TMS320C28XX__)
-#  define ARCHITECTURE_ID "TMS320C28x"
-
-# elif defined(__TMS320C6X__) || defined(_TMS320C6X)
-#  define ARCHITECTURE_ID "TMS320C6x"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-# elif defined(__ADSPSHARC__)
-#  define ARCHITECTURE_ID "SHARC"
-
-# elif defined(__ADSPBLACKFIN__)
-#  define ARCHITECTURE_ID "Blackfin"
-
-#elif defined(__TASKING__)
-
-# if defined(__CTC__) || defined(__CPTC__)
-#  define ARCHITECTURE_ID "TriCore"
-
-# elif defined(__CMCS__)
-#  define ARCHITECTURE_ID "MCS"
-
-# elif defined(__CARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__CARC__)
-#  define ARCHITECTURE_ID "ARC"
-
-# elif defined(__C51__)
-#  define ARCHITECTURE_ID "8051"
-
-# elif defined(__CPCP__)
-#  define ARCHITECTURE_ID "PCP"
-
-# else
-#  define ARCHITECTURE_ID ""
-# endif
-
-#else
-#  define ARCHITECTURE_ID
-#endif
-
-/* Convert integer to decimal digit literals.  */
-#define DEC(n)                   \
-  ('0' + (((n) / 10000000)%10)), \
-  ('0' + (((n) / 1000000)%10)),  \
-  ('0' + (((n) / 100000)%10)),   \
-  ('0' + (((n) / 10000)%10)),    \
-  ('0' + (((n) / 1000)%10)),     \
-  ('0' + (((n) / 100)%10)),      \
-  ('0' + (((n) / 10)%10)),       \
-  ('0' +  ((n) % 10))
-
-/* Convert integer to hex digit literals.  */
-#define HEX(n)             \
-  ('0' + ((n)>>28 & 0xF)), \
-  ('0' + ((n)>>24 & 0xF)), \
-  ('0' + ((n)>>20 & 0xF)), \
-  ('0' + ((n)>>16 & 0xF)), \
-  ('0' + ((n)>>12 & 0xF)), \
-  ('0' + ((n)>>8  & 0xF)), \
-  ('0' + ((n)>>4  & 0xF)), \
-  ('0' + ((n)     & 0xF))
-
-/* Construct a string literal encoding the version number. */
-#ifdef COMPILER_VERSION
-char const* info_version = "INFO" ":" "compiler_version[" COMPILER_VERSION "]";
-
-/* Construct a string literal encoding the version number components. */
-#elif defined(COMPILER_VERSION_MAJOR)
-char const info_version[] = {
-  'I', 'N', 'F', 'O', ':',
-  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[',
-  COMPILER_VERSION_MAJOR,
-# ifdef COMPILER_VERSION_MINOR
-  '.', COMPILER_VERSION_MINOR,
-#  ifdef COMPILER_VERSION_PATCH
-   '.', COMPILER_VERSION_PATCH,
-#   ifdef COMPILER_VERSION_TWEAK
-    '.', COMPILER_VERSION_TWEAK,
-#   endif
-#  endif
-# endif
-  ']','\0'};
-#endif
-
-/* Construct a string literal encoding the internal version number. */
-#ifdef COMPILER_VERSION_INTERNAL
-char const info_version_internal[] = {
-  'I', 'N', 'F', 'O', ':',
-  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','_',
-  'i','n','t','e','r','n','a','l','[',
-  COMPILER_VERSION_INTERNAL,']','\0'};
-#elif defined(COMPILER_VERSION_INTERNAL_STR)
-char const* info_version_internal = "INFO" ":" "compiler_version_internal[" COMPILER_VERSION_INTERNAL_STR "]";
-#endif
-
-/* Construct a string literal encoding the version number components. */
-#ifdef SIMULATE_VERSION_MAJOR
-char const info_simulate_version[] = {
-  'I', 'N', 'F', 'O', ':',
-  's','i','m','u','l','a','t','e','_','v','e','r','s','i','o','n','[',
-  SIMULATE_VERSION_MAJOR,
-# ifdef SIMULATE_VERSION_MINOR
-  '.', SIMULATE_VERSION_MINOR,
-#  ifdef SIMULATE_VERSION_PATCH
-   '.', SIMULATE_VERSION_PATCH,
-#   ifdef SIMULATE_VERSION_TWEAK
-    '.', SIMULATE_VERSION_TWEAK,
-#   endif
-#  endif
-# endif
-  ']','\0'};
-#endif
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]";
-char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]";
-
-
-
-#define CXX_STD_98 199711L
-#define CXX_STD_11 201103L
-#define CXX_STD_14 201402L
-#define CXX_STD_17 201703L
-#define CXX_STD_20 202002L
-#define CXX_STD_23 202302L
-
-#if defined(__INTEL_COMPILER) && defined(_MSVC_LANG)
-#  if _MSVC_LANG > CXX_STD_17
-#    define CXX_STD _MSVC_LANG
-#  elif _MSVC_LANG == CXX_STD_17 && defined(__cpp_aggregate_paren_init)
-#    define CXX_STD CXX_STD_20
-#  elif _MSVC_LANG > CXX_STD_14 && __cplusplus > CXX_STD_17
-#    define CXX_STD CXX_STD_20
-#  elif _MSVC_LANG > CXX_STD_14
-#    define CXX_STD CXX_STD_17
-#  elif defined(__INTEL_CXX11_MODE__) && defined(__cpp_aggregate_nsdmi)
-#    define CXX_STD CXX_STD_14
-#  elif defined(__INTEL_CXX11_MODE__)
-#    define CXX_STD CXX_STD_11
-#  else
-#    define CXX_STD CXX_STD_98
-#  endif
-#elif defined(_MSC_VER) && defined(_MSVC_LANG)
-#  if _MSVC_LANG > __cplusplus
-#    define CXX_STD _MSVC_LANG
-#  else
-#    define CXX_STD __cplusplus
-#  endif
-#elif defined(__NVCOMPILER)
-#  if __cplusplus == CXX_STD_17 && defined(__cpp_aggregate_paren_init)
-#    define CXX_STD CXX_STD_20
-#  else
-#    define CXX_STD __cplusplus
-#  endif
-#elif defined(__INTEL_COMPILER) || defined(__PGI)
-#  if __cplusplus == CXX_STD_11 && defined(__cpp_namespace_attributes)
-#    define CXX_STD CXX_STD_17
-#  elif __cplusplus == CXX_STD_11 && defined(__cpp_aggregate_nsdmi)
-#    define CXX_STD CXX_STD_14
-#  else
-#    define CXX_STD __cplusplus
-#  endif
-#elif (defined(__IBMCPP__) || defined(__ibmxl__)) && defined(__linux__)
-#  if __cplusplus == CXX_STD_11 && defined(__cpp_aggregate_nsdmi)
-#    define CXX_STD CXX_STD_14
-#  else
-#    define CXX_STD __cplusplus
-#  endif
-#elif __cplusplus == 1 && defined(__GXX_EXPERIMENTAL_CXX0X__)
-#  define CXX_STD CXX_STD_11
-#else
-#  define CXX_STD __cplusplus
-#endif
-
-const char* info_language_standard_default = "INFO" ":" "standard_default["
-#if CXX_STD > CXX_STD_23
-  "26"
-#elif CXX_STD > CXX_STD_20
-  "23"
-#elif CXX_STD > CXX_STD_17
-  "20"
-#elif CXX_STD > CXX_STD_14
-  "17"
-#elif CXX_STD > CXX_STD_11
-  "14"
-#elif CXX_STD >= CXX_STD_11
-  "11"
-#else
-  "98"
-#endif
-"]";
-
-const char* info_language_extensions_default = "INFO" ":" "extensions_default["
-#if (defined(__clang__) || defined(__GNUC__) || defined(__xlC__) ||           \
-     defined(__TI_COMPILER_VERSION__)) &&                                     \
-  !defined(__STRICT_ANSI__)
-  "ON"
-#else
-  "OFF"
-#endif
-"]";
-
-/*--------------------------------------------------------------------------*/
-
-int main(int argc, char* argv[])
-{
-  int require = 0;
-  require += info_compiler[argc];
-  require += info_platform[argc];
-  require += info_arch[argc];
-#ifdef COMPILER_VERSION_MAJOR
-  require += info_version[argc];
-#endif
-#ifdef COMPILER_VERSION_INTERNAL
-  require += info_version_internal[argc];
-#endif
-#ifdef SIMULATE_ID
-  require += info_simulate[argc];
-#endif
-#ifdef SIMULATE_VERSION_MAJOR
-  require += info_simulate_version[argc];
-#endif
-#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
-  require += info_cray[argc];
-#endif
-  require += info_language_standard_default[argc];
-  require += info_language_extensions_default[argc];
-  (void)argv;
-  return require;
-}
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
deleted file mode 100755
index 78617c271080d9e2231a72abde01b7fc302df0f2..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 15576
zcmeHOU2Ggz6~4Pp8VBO66YAo|6&V#&xfD-!9mi|~rt8>ik0t+<)Dfm3Ovbxod&T}S
zI~zHbfFJ|KSgHCWK^`a|p+10AK_ygpp*RW@f?AY5AVqyZE~1jD($*C}N=fA9oO{n%
z&tBFAfj~UWwRX;&@0{=4JLk^qT+f{SLVA288i@#QE#hMWHKSc2DKcC=LOUQ*A}QKn
zdxz)}w}8GwV#=OU0<5ZCjW)_w!dpNhuM>Bg$U77aeW=DGM2WoZ+65dCG?s#n19>~q
zK)Nnpqz+iJz22XJWN3!m*5yZu$1=#np{(^N|FwZeIYW6lO_F)2B5#9u8^mLIh5BR3
z`NW*yCrSC#WeRNAQgSPV&RZm&E{DmVCH8^sfmi+Pzti9S#CySzVT3MuzFBgA9|s;y
zts?%DEl=}t>TkPwFev{lDZS!QJ~!LncPO9j$>)mI#h%4ve@}m(St*&lvS%Du96oqX
zjZU5r(Q{%IG3G}^q(P684lc5x@2&8`v?ITo{Nh`0EI$0;<EPL3@J07)HwJ$F*z4$n
z$AK}?2ODDe;f6N;F!ry=8F0F@iQ@=h`<vi64x<T<eK*5Dv<)t7d%jRA+7;jNeA^cG
z*z|;*bv<`JSMgnMdSWPFD!S9oY~EG2<`x^KCqqFBPOb=HGmDNrmn%B?+(WJabH&eQ
z?zsnNtRK}veQ!PkOw<yHXB0j<K6Y%#?llkh3Eu5B<#%2b<_KmJ{;)+vR6GKb&#xan
z_H{TdTf_yzst0nr1^9dyouTn{&(~Y~K83H-b<OxH1#C?zJL9akYq()3zfKMJ2sbqR
zVZysL{0YM28vZoltM>`n;2<djO8->=r%Om0t^{!UN|E^003JMl*8;fwepcbbZJ2>D
z17QZj41^g7GZ1DV%)oys1AmIW?{C)9wN`6o=jB5}SYKZCqqQs6($8Bj$sW<3czta7
zrB7SSzqgkDuyOx%I<cC#Y@Hu?860XIOThZ`oEba#CFu|ND;Vee&X-Z#d)@DV&~p@e
zcWo_p@Ekf`A_@M_NdF_>M{)P2wY*_neB(ar;`J6Q^1SuZrhh90I6?thYio0{gTq^V
z9N)Qt0+>bh@Cj>a;58F=t>st!Hfv?zF2HLYR{>hj)M~ZocMby(Idy4kyqD&-_G1TA
z0^|L09(+$gjOEW=vzDuCzf9l6AzLdQzk^6C>1);nD{>|FtcX3g8cE*-{5RX+&o#qU
zfb$&}_X-hvc1L?X%7td$5dEvo@Rjt<Q!qvK`K!+u4mE6H2Eq)483;2FW+2Q!n1L_@
zVFtnsgc%4k5N4n;1Nc7co!Z#s$kfqHsZh@4UGF5kg*?^h-C(!RxLze!DxQqXmgqCp
zPP~_Q5~qY@l=F^1SMmxc$MNkdfsU71I7$2Pez2HzyezyMoO7yq|77CBWN{aLw}`z|
z>b9v#IjTrk%SSq4cz8t9Z`NvkASX6zwQ-R6t`%G4q2nU5*dFQHv#a${c%_FpzH9CT
z|GUs(c$a(=hZyqT2K*_+2luvrB|6l0OY}RyL?CQo2Eq)483;2FW+2Q!n1L_@VFtns
zgc<n%$^h3Ja($tyViaPYhROOFO+TmUkC48HBo{!ok-kcGjklA|b&p-7^S?|7Nay-T
zuJdL4Up8wcbXle1L9PibQ_&#SA!1u2`@57Xen9fwB=P@1Y#mC}x4UTXGzI2<lavT3
z-jt2`H)?7;07}<Q(&NO3H^p+ioJaU~Q|boU-zJ^=q4586!S&<Yb<B09hM_#Tj+E<0
zxlWYpLPv*&jvC$YJm78v{>|?-6Gm^mw=bTI9}(M_?oGtE>l|>*-wyFsO?Sb0h={!+
zWhhH;z@eG{2c<n$uPbMFEVqq__Xs@?BNFcr>r{uz{-1)Kc5$0XrWjEY>--JCg@$Lq
zybs0+M%lQ=)dTHL1vPBXgSKDn5x3KI^AuSh2e~hLo8b9i(zg+Ze)W3arwKPw%9GEt
zAA`C-+9vqAR8}E=ia09)iNzckKb}$`$GJgxyN0JA4>*2<>XzlR6Y$-QcoeQe!c{aV
zbO0QWOV4K);?Qrm7XK*Vn14ObqY{6wNRdCsA17RoKLfbIP66p}gD-7^i=heUGw#sL
z%n&^b8_SxRa#`39jwgC^#kmqc`+`bzxGL<lWse*moJiZ&@Nr=ee{yngVr)p*qvKP@
z2FLBGk&y?|)Asb>vGFw2z`I$;cc9#T3M$&OxuRXIxLK{DJr%4<r;7J%rDQL_V=^d}
zmm}bZYD&YWX#y+aa}Y`^m#;^Ia(7A1JH`2`Gw<5}_;gJ<@FPHBLqH!QLZ!Z)o*ae}
z{>A|MgFA4=qf@o|aHvH*ve`<7fp@C^Z}L-trauP|X60<bcV<EQo{|f^mn*{03d+JP
zmVDQoFILU6S1P-ne>MQkR&($}k6f0Z!DC}RzB4bR`+`$h5N7sl5xP*)_mqVmb~Y$B
z*gQAyAVHWiRi+O)6{egB(<{lTHr)k#&T|T`y^sY4Yl>kzp69^ukiq*9&MD+F&{qj!
z!Nx4-VMhgnYzh-5sNfd;z$yM8?c#kKE`|Ej;ZC~WvgG?VcY?mb_I^<CUK=GaNqm+m
z!ddY54eR}|6XY)vpXCSGktBcLGCZd7ze#+S20N0}`JVv%uW;|?@$-6wB_BVpNA&SK
zz{j-+^Lf3(@=@v+j}ddnd|r3t0K*|OpVvPudA$QJvg!H%ETFhHVLq=%Sn@iK$IpH&
zKM#Cd>#)x2ow`)r$~g*-pJ0LaH_R#XdA-Gw*IV4be*E76F2-eh{eD9C6<$|@i){M*
zJqc)#&-W>o-_jDM-LB;CcY=JrkFw--FLmGWn=Hh>NB#5h3j<MThTMwFO4PRm*Y#&$
z5Bq2S3*^9(&p#&U$Nw{pzfOFX(@Z4E`DYl%2df!*4kE_udHx-p?$0{Q-vTEV;PZNa
zy$7Rho$pH9(wYAX7;x_CvaPS%_;-=~`$t~SGmq!-HQ-|Yn9sjsT0I0Hv~DHpTjsNT
z6D&bKuMgLW&(|pjU>?is8egQyGp=NkR2Ix*eG_&N<MH#lCP{qVAIBPOEdU@!?sXIM
z@%uH{m>-mU?gjnI6!0fxJOD<V10E0OWjA0v_8`Ceu+pC7j>xE~uqJHI{{_C3gSJN_
HXsY--f}ZvE

diff --git a/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml b/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
deleted file mode 100644
index ea990e46285..00000000000
--- a/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
+++ /dev/null
@@ -1,562 +0,0 @@
-
----
-events:
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineSystem.cmake:205 (message)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      The system is: Linux - 6.10.2-273-tkg-eevdf - x86_64
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:17 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:64 (__determine_compiler_id_test)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCCompiler.cmake:123 (CMAKE_DETERMINE_COMPILER_ID)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Compiling the C compiler identification source file "CMakeCCompilerId.c" succeeded.
-      Compiler: /usr/bin/cc 
-      Build flags: 
-      Id flags:  
-      
-      The output was:
-      0
-      
-      
-      Compilation of the C compiler identification source "CMakeCCompilerId.c" produced "a.out"
-      
-      The C compiler identification is GNU, found in:
-        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:17 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:64 (__determine_compiler_id_test)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCXXCompiler.cmake:126 (CMAKE_DETERMINE_COMPILER_ID)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" succeeded.
-      Compiler: /usr/bin/c++ 
-      Build flags: 
-      Id flags:  
-      
-      The output was:
-      0
-      
-      
-      Compilation of the CXX compiler identification source "CMakeCXXCompilerId.cpp" produced "a.out"
-      
-      The CXX compiler identification is GNU, found in:
-        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
-      
-  -
-    kind: "try_compile-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:74 (try_compile)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    checks:
-      - "Detecting C compiler ABI info"
-    directories:
-      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-UosbFc"
-      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-UosbFc"
-    cmakeVariables:
-      CMAKE_C_FLAGS: ""
-      CMAKE_C_FLAGS_DEBUG: "-g"
-      CMAKE_EXE_LINKER_FLAGS: ""
-    buildResult:
-      variable: "CMAKE_C_ABI_COMPILED"
-      cached: true
-      stdout: |
-        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-UosbFc'
-        
-        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_332c1
-        [1/2] /usr/bin/cc   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c
-        Using built-in specs.
-        COLLECT_GCC=/usr/bin/cc
-        Target: x86_64-pc-linux-gnu
-        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
-        Thread model: posix
-        Supported LTO compression algorithms: zlib zstd
-        gcc version 14.2.1 20240910 (GCC) 
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/'
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1 -quiet -v /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c -quiet -dumpdir CMakeFiles/cmTC_332c1.dir/ -dumpbase CMakeCCompilerABI.c.c -dumpbase-ext .c -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/cce4ofAB.s
-        GNU C17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)
-        	compiled by GNU C version 14.2.1 20240910, GMP version 6.3.0, MPFR version 4.2.1, MPC version 1.3.1, isl version isl-0.27-GMP
-        
-        GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
-        ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"
-        #include "..." search starts here:
-        #include <...> search starts here:
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include
-         /usr/local/include
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed
-         /usr/include
-        End of search list.
-        Compiler executable checksum: 91e980a230f7d2e39f93577991713edd
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/'
-         as -v --64 -o CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o /tmp/cce4ofAB.s
-        GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0
-        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
-        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.'
-        [2/2] : && /usr/bin/cc  -v -Wl,-v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -o cmTC_332c1   && :
-        Using built-in specs.
-        COLLECT_GCC=/usr/bin/cc
-        COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper
-        Target: x86_64-pc-linux-gnu
-        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
-        Thread model: posix
-        Supported LTO compression algorithms: zlib zstd
-        gcc version 14.2.1 20240910 (GCC) 
-        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
-        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
-        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_332c1' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_332c1.'
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccURuGYB.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_332c1 /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
-        collect2 version 14.2.1 20240910
-        /usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccURuGYB.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_332c1 /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
-        GNU ld (GNU Binutils) 2.43.0
-        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_332c1' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_332c1.'
-        
-      exitCode: 0
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:182 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Parsed C implicit include dir info: rv=done
-        found start of include info
-        found start of implicit include info
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-          add: [/usr/local/include]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-          add: [/usr/include]
-        end of search list found
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-        collapse include dir [/usr/local/include] ==> [/usr/local/include]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-        collapse include dir [/usr/include] ==> [/usr/include]
-        implicit include dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include]
-      
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:218 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Parsed C implicit link information:
-        link line regex: [^( *|.*[/\\])(ld[0-9]*(\\.[a-z]+)?|CMAKE_LINK_STARTFILE-NOTFOUND|([^/\\]+-)?ld|collect2)[^/\\]*( |$)]
-        linker tool regex: [^[ 	]*(->|")?[ 	]*(([^"]*[/\\])?(ld[0-9]*(\\.[a-z]+)?))("|,| |$)]
-        ignore line: [Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-UosbFc']
-        ignore line: []
-        ignore line: [Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_332c1]
-        ignore line: [[1/2] /usr/bin/cc   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c]
-        ignore line: [Using built-in specs.]
-        ignore line: [COLLECT_GCC=/usr/bin/cc]
-        ignore line: [Target: x86_64-pc-linux-gnu]
-        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
-        ignore line: [Thread model: posix]
-        ignore line: [Supported LTO compression algorithms: zlib zstd]
-        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/']
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1 -quiet -v /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c -quiet -dumpdir CMakeFiles/cmTC_332c1.dir/ -dumpbase CMakeCCompilerABI.c.c -dumpbase-ext .c -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/cce4ofAB.s]
-        ignore line: [GNU C17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)]
-        ignore line: [	compiled by GNU C version 14.2.1 20240910  GMP version 6.3.0  MPFR version 4.2.1  MPC version 1.3.1  isl version isl-0.27-GMP]
-        ignore line: []
-        ignore line: [GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072]
-        ignore line: [ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"]
-        ignore line: [#include "..." search starts here:]
-        ignore line: [#include <...> search starts here:]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-        ignore line: [ /usr/local/include]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-        ignore line: [ /usr/include]
-        ignore line: [End of search list.]
-        ignore line: [Compiler executable checksum: 91e980a230f7d2e39f93577991713edd]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/']
-        ignore line: [ as -v --64 -o CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o /tmp/cce4ofAB.s]
-        ignore line: [GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0]
-        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
-        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.']
-        ignore line: [[2/2] : && /usr/bin/cc  -v -Wl -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -o cmTC_332c1   && :]
-        ignore line: [Using built-in specs.]
-        ignore line: [COLLECT_GCC=/usr/bin/cc]
-        ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper]
-        ignore line: [Target: x86_64-pc-linux-gnu]
-        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
-        ignore line: [Thread model: posix]
-        ignore line: [Supported LTO compression algorithms: zlib zstd]
-        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
-        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
-        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
-        ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_332c1' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_332c1.']
-        link line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccURuGYB.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_332c1 /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2] ==> ignore
-          arg [-plugin] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so] ==> ignore
-          arg [-plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper] ==> ignore
-          arg [-plugin-opt=-fresolution=/tmp/ccURuGYB.res] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
-          arg [-plugin-opt=-pass-through=-lc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
-          arg [--build-id] ==> ignore
-          arg [--eh-frame-hdr] ==> ignore
-          arg [--hash-style=gnu] ==> ignore
-          arg [-m] ==> ignore
-          arg [elf_x86_64] ==> ignore
-          arg [-dynamic-linker] ==> ignore
-          arg [/lib64/ld-linux-x86-64.so.2] ==> ignore
-          arg [-pie] ==> ignore
-          arg [-o] ==> ignore
-          arg [cmTC_332c1] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib]
-          arg [-L/lib/../lib] ==> dir [/lib/../lib]
-          arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..]
-          arg [-v] ==> ignore
-          arg [CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o] ==> ignore
-          arg [-lgcc] ==> lib [gcc]
-          arg [--push-state] ==> ignore
-          arg [--as-needed] ==> ignore
-          arg [-lgcc_s] ==> lib [gcc_s]
-          arg [--pop-state] ==> ignore
-          arg [-lc] ==> lib [c]
-          arg [-lgcc] ==> lib [gcc]
-          arg [--push-state] ==> ignore
-          arg [--as-needed] ==> ignore
-          arg [-lgcc_s] ==> lib [gcc_s]
-          arg [--pop-state] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-        ignore line: [collect2 version 14.2.1 20240910]
-        ignore line: [/usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccURuGYB.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_332c1 /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-        linker tool for 'C': /usr/bin/ld
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> [/usr/lib/Scrt1.o]
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> [/usr/lib/crti.o]
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> [/usr/lib/crtn.o]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> [/usr/lib]
-        collapse library dir [/lib/../lib] ==> [/lib]
-        collapse library dir [/usr/lib/../lib] ==> [/usr/lib]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> [/usr/lib]
-        implicit libs: [gcc;gcc_s;c;gcc;gcc_s]
-        implicit objs: [/usr/lib/Scrt1.o;/usr/lib/crti.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o;/usr/lib/crtn.o]
-        implicit dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib]
-        implicit fwks: []
-      
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CMakeDetermineLinkerId.cmake:40 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:255 (cmake_determine_linker_id)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Running the C compiler's linker: "/usr/bin/ld" "-v"
-      GNU ld (GNU Binutils) 2.43.0
-  -
-    kind: "try_compile-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:74 (try_compile)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    checks:
-      - "Detecting CXX compiler ABI info"
-    directories:
-      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-Ii9uQJ"
-      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-Ii9uQJ"
-    cmakeVariables:
-      CMAKE_CXX_FLAGS: ""
-      CMAKE_CXX_FLAGS_DEBUG: "-g"
-      CMAKE_CXX_SCAN_FOR_MODULES: "OFF"
-      CMAKE_EXE_LINKER_FLAGS: ""
-    buildResult:
-      variable: "CMAKE_CXX_ABI_COMPILED"
-      cached: true
-      stdout: |
-        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-Ii9uQJ'
-        
-        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_1c87e
-        [1/2] /usr/bin/c++   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp
-        Using built-in specs.
-        COLLECT_GCC=/usr/bin/c++
-        Target: x86_64-pc-linux-gnu
-        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
-        Thread model: posix
-        Supported LTO compression algorithms: zlib zstd
-        gcc version 14.2.1 20240910 (GCC) 
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/'
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1plus -quiet -v -D_GNU_SOURCE /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp -quiet -dumpdir CMakeFiles/cmTC_1c87e.dir/ -dumpbase CMakeCXXCompilerABI.cpp.cpp -dumpbase-ext .cpp -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/ccI2PFmy.s
-        GNU C++17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)
-        	compiled by GNU C version 14.2.1 20240910, GMP version 6.3.0, MPFR version 4.2.1, MPC version 1.3.1, isl version isl-0.27-GMP
-        
-        GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
-        ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"
-        #include "..." search starts here:
-        #include <...> search starts here:
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include
-         /usr/local/include
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed
-         /usr/include
-        End of search list.
-        Compiler executable checksum: fce5a105c47978e141f61a441742cadf
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/'
-         as -v --64 -o CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o /tmp/ccI2PFmy.s
-        GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0
-        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
-        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.'
-        [2/2] : && /usr/bin/c++  -v -Wl,-v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -o cmTC_1c87e   && :
-        Using built-in specs.
-        COLLECT_GCC=/usr/bin/c++
-        COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper
-        Target: x86_64-pc-linux-gnu
-        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
-        Thread model: posix
-        Supported LTO compression algorithms: zlib zstd
-        gcc version 14.2.1 20240910 (GCC) 
-        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
-        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
-        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_1c87e' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_1c87e.'
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cczdPYYx.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_1c87e /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
-        collect2 version 14.2.1 20240910
-        /usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cczdPYYx.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_1c87e /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
-        GNU ld (GNU Binutils) 2.43.0
-        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_1c87e' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_1c87e.'
-        
-      exitCode: 0
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:182 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Parsed CXX implicit include dir info: rv=done
-        found start of include info
-        found start of implicit include info
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-          add: [/usr/local/include]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-          add: [/usr/include]
-        end of search list found
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1] ==> [/usr/include/c++/14.2.1]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu] ==> [/usr/include/c++/14.2.1/x86_64-pc-linux-gnu]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward] ==> [/usr/include/c++/14.2.1/backward]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-        collapse include dir [/usr/local/include] ==> [/usr/local/include]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-        collapse include dir [/usr/include] ==> [/usr/include]
-        implicit include dirs: [/usr/include/c++/14.2.1;/usr/include/c++/14.2.1/x86_64-pc-linux-gnu;/usr/include/c++/14.2.1/backward;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include]
-      
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:218 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Parsed CXX implicit link information:
-        link line regex: [^( *|.*[/\\])(ld[0-9]*(\\.[a-z]+)?|CMAKE_LINK_STARTFILE-NOTFOUND|([^/\\]+-)?ld|collect2)[^/\\]*( |$)]
-        linker tool regex: [^[ 	]*(->|")?[ 	]*(([^"]*[/\\])?(ld[0-9]*(\\.[a-z]+)?))("|,| |$)]
-        ignore line: [Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-Ii9uQJ']
-        ignore line: []
-        ignore line: [Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_1c87e]
-        ignore line: [[1/2] /usr/bin/c++   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp]
-        ignore line: [Using built-in specs.]
-        ignore line: [COLLECT_GCC=/usr/bin/c++]
-        ignore line: [Target: x86_64-pc-linux-gnu]
-        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
-        ignore line: [Thread model: posix]
-        ignore line: [Supported LTO compression algorithms: zlib zstd]
-        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/']
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1plus -quiet -v -D_GNU_SOURCE /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp -quiet -dumpdir CMakeFiles/cmTC_1c87e.dir/ -dumpbase CMakeCXXCompilerABI.cpp.cpp -dumpbase-ext .cpp -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/ccI2PFmy.s]
-        ignore line: [GNU C++17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)]
-        ignore line: [	compiled by GNU C version 14.2.1 20240910  GMP version 6.3.0  MPFR version 4.2.1  MPC version 1.3.1  isl version isl-0.27-GMP]
-        ignore line: []
-        ignore line: [GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072]
-        ignore line: [ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"]
-        ignore line: [#include "..." search starts here:]
-        ignore line: [#include <...> search starts here:]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-        ignore line: [ /usr/local/include]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-        ignore line: [ /usr/include]
-        ignore line: [End of search list.]
-        ignore line: [Compiler executable checksum: fce5a105c47978e141f61a441742cadf]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/']
-        ignore line: [ as -v --64 -o CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o /tmp/ccI2PFmy.s]
-        ignore line: [GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0]
-        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
-        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.']
-        ignore line: [[2/2] : && /usr/bin/c++  -v -Wl -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -o cmTC_1c87e   && :]
-        ignore line: [Using built-in specs.]
-        ignore line: [COLLECT_GCC=/usr/bin/c++]
-        ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper]
-        ignore line: [Target: x86_64-pc-linux-gnu]
-        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
-        ignore line: [Thread model: posix]
-        ignore line: [Supported LTO compression algorithms: zlib zstd]
-        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
-        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
-        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
-        ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_1c87e' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_1c87e.']
-        link line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cczdPYYx.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_1c87e /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2] ==> ignore
-          arg [-plugin] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so] ==> ignore
-          arg [-plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper] ==> ignore
-          arg [-plugin-opt=-fresolution=/tmp/cczdPYYx.res] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
-          arg [--build-id] ==> ignore
-          arg [--eh-frame-hdr] ==> ignore
-          arg [--hash-style=gnu] ==> ignore
-          arg [-m] ==> ignore
-          arg [elf_x86_64] ==> ignore
-          arg [-dynamic-linker] ==> ignore
-          arg [/lib64/ld-linux-x86-64.so.2] ==> ignore
-          arg [-pie] ==> ignore
-          arg [-o] ==> ignore
-          arg [cmTC_1c87e] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib]
-          arg [-L/lib/../lib] ==> dir [/lib/../lib]
-          arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..]
-          arg [-v] ==> ignore
-          arg [CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o] ==> ignore
-          arg [-lstdc++] ==> lib [stdc++]
-          arg [-lm] ==> lib [m]
-          arg [-lgcc_s] ==> lib [gcc_s]
-          arg [-lgcc] ==> lib [gcc]
-          arg [-lc] ==> lib [c]
-          arg [-lgcc_s] ==> lib [gcc_s]
-          arg [-lgcc] ==> lib [gcc]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-        ignore line: [collect2 version 14.2.1 20240910]
-        ignore line: [/usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cczdPYYx.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_1c87e /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-        linker tool for 'CXX': /usr/bin/ld
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> [/usr/lib/Scrt1.o]
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> [/usr/lib/crti.o]
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> [/usr/lib/crtn.o]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> [/usr/lib]
-        collapse library dir [/lib/../lib] ==> [/lib]
-        collapse library dir [/usr/lib/../lib] ==> [/usr/lib]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> [/usr/lib]
-        implicit libs: [stdc++;m;gcc_s;gcc;c;gcc_s;gcc]
-        implicit objs: [/usr/lib/Scrt1.o;/usr/lib/crti.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o;/usr/lib/crtn.o]
-        implicit dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib]
-        implicit fwks: []
-      
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CMakeDetermineLinkerId.cmake:40 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:255 (cmake_determine_linker_id)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Running the CXX compiler's linker: "/usr/bin/ld" "-v"
-      GNU ld (GNU Binutils) 2.43.0
-  -
-    kind: "try_compile-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CheckSourceCompiles.cmake:101 (try_compile)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CheckCSourceCompiles.cmake:52 (cmake_check_source_compiles)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/FindThreads.cmake:97 (CHECK_C_SOURCE_COMPILES)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/FindThreads.cmake:163 (_threads_check_libc)"
-      - "CMakeLists.txt:235 (find_package)"
-    checks:
-      - "Performing Test CMAKE_HAVE_LIBC_PTHREAD"
-    directories:
-      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-AqF7mh"
-      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-AqF7mh"
-    cmakeVariables:
-      CMAKE_C_FLAGS: ""
-      CMAKE_C_FLAGS_DEBUG: "-g"
-      CMAKE_EXE_LINKER_FLAGS: ""
-      CMAKE_MODULE_PATH: "/home/scarjit/Git/OrcaSlicer/cmake/modules/"
-      CMAKE_POSITION_INDEPENDENT_CODE: "ON"
-    buildResult:
-      variable: "CMAKE_HAVE_LIBC_PTHREAD"
-      cached: true
-      stdout: |
-        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-AqF7mh'
-        
-        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_55d55
-        [1/2] /usr/bin/cc -DCMAKE_HAVE_LIBC_PTHREAD  -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_55d55.dir/src.c.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-AqF7mh/src.c
-        [2/2] : && /usr/bin/cc   CMakeFiles/cmTC_55d55.dir/src.c.o -o cmTC_55d55   && :
-        
-      exitCode: 0
-  -
-    kind: "try_compile-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CheckIncludeFileCXX.cmake:89 (try_compile)"
-      - "cmake/modules/Findcereal.cmake:17 (CHECK_INCLUDE_FILE_CXX)"
-      - "CMakeLists.txt:544 (find_package)"
-    checks:
-      - "Looking for C++ include cereal/cereal.hpp"
-    directories:
-      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7"
-      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7"
-    cmakeVariables:
-      CMAKE_CXX_FLAGS: " -fext-numeric-literals -Wall -Wno-reorder"
-      CMAKE_CXX_FLAGS_DEBUG: "-g"
-      CMAKE_EXE_LINKER_FLAGS: ""
-      CMAKE_MODULE_PATH: "/home/scarjit/Git/OrcaSlicer/cmake/modules/"
-      CMAKE_POSITION_INDEPENDENT_CODE: "ON"
-    buildResult:
-      variable: "HAVE_CEREAL_H"
-      cached: true
-      stdout: |
-        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7'
-        
-        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_d484c
-        [1/2] /usr/bin/c++   -fext-numeric-literals -Wall -Wno-reorder  -std=gnu++17 -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_d484c.dir/CheckIncludeFile.cxx.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7/CheckIncludeFile.cxx
-        FAILED: CMakeFiles/cmTC_d484c.dir/CheckIncludeFile.cxx.o 
-        /usr/bin/c++   -fext-numeric-literals -Wall -Wno-reorder  -std=gnu++17 -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_d484c.dir/CheckIncludeFile.cxx.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7/CheckIncludeFile.cxx
-        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7/CheckIncludeFile.cxx:1:10: fatal error: cereal/cereal.hpp: No such file or directory
-            1 | #include <cereal/cereal.hpp>
-              |          ^~~~~~~~~~~~~~~~~~~
-        compilation terminated.
-        ninja: build stopped: subcommand failed.
-        
-      exitCode: 1
-...
diff --git a/cmake-build-debug/CMakeFiles/clion-Debug-log.txt b/cmake-build-debug/CMakeFiles/clion-Debug-log.txt
deleted file mode 100644
index 380b8a715f2..00000000000
--- a/cmake-build-debug/CMakeFiles/clion-Debug-log.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake -DCMAKE_BUILD_TYPE=Debug -DCMAKE_MAKE_PROGRAM=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -G Ninja -S /home/scarjit/Git/OrcaSlicer -B /home/scarjit/Git/OrcaSlicer/cmake-build-debug
--- The C compiler identification is GNU 14.2.1
--- The CXX compiler identification is GNU 14.2.1
--- Detecting C compiler ABI info
--- Detecting C compiler ABI info - done
--- Check for working C compiler: /usr/bin/cc - skipped
--- Detecting C compile features
--- Detecting C compile features - done
--- Detecting CXX compiler ABI info
--- Detecting CXX compiler ABI info - done
--- Check for working CXX compiler: /usr/bin/c++ - skipped
--- Detecting CXX compile features
--- Detecting CXX compile features - done
--- SLIC3R_ASAN: OFF
--- SLIC3R_BUILD_SANDBOXES: OFF
--- SLIC3R_BUILD_TESTS: OFF
--- SLIC3R_DESKTOP_INTEGRATION: ON
--- SLIC3R_FHS: OFF
--- SLIC3R_GTK: 2
--- SLIC3R_GUI: ON
--- SLIC3R_MSVC_COMPILE_PARALLEL: ON
--- SLIC3R_MSVC_PDB: ON
--- SLIC3R_PCH: ON
--- SLIC3R_PERL_XS: OFF
--- SLIC3R_PROFILE: OFF
--- SLIC3R_STATIC: OFF
--- SLIC3R_WX_STABLE: OFF
--- SLIC3R_STATIC: OFF
--- CMAKE_PREFIX_PATH: (default)
--- PROJECT_SOURCE_DIR: /home/scarjit/Git/OrcaSlicer
--- CMAKE_MODULE_PATH: /home/scarjit/Git/OrcaSlicer/cmake/modules/
--- Found PkgConfig: /usr/bin/pkg-config (found version "2.1.1")
--- Performing Test CMAKE_HAVE_LIBC_PTHREAD
--- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
--- Found Threads: TRUE
--- Found DBus: /usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
--- LIBDIR: /home/scarjit/Git/OrcaSlicer/src
--- LIBDIR_BIN: /home/scarjit/Git/OrcaSlicer/cmake-build-debug/src
-CMake Warning (dev) at CMakeLists.txt:415 (find_package):
-  Policy CMP0167 is not set: The FindBoost module is removed.  Run "cmake
-  --help-policy CMP0167" for policy details.  Use the cmake_policy command to
-  set the policy and suppress this warning.
-
-This warning is for project developers.  Use -Wno-dev to suppress it.
-
--- Found Boost: /usr/lib/cmake/Boost-1.86.0/BoostConfig.cmake (found suitable version "1.86.0", minimum required is "1.66") found components: system filesystem thread log locale regex chrono atomic date_time iostreams program_options
--- TBB found in /usr/lib/cmake/TBB
--- Found OpenSSL: /usr/lib/libcrypto.so (found version "3.4.0")
--- Found CURL: /usr/lib/libcurl.so (found version "8.11.0") 
--- Found ZLIB: /usr/lib/libz.so (found version "1.3.1")
--- Could NOT find Eigen3 (missing: EIGEN3_INCLUDE_DIR EIGEN3_VERSION_OK) (Required is at least version "3.3")
--- Found EXPAT: /usr/lib/libexpat.so (found version "2.6.4")
--- Found PNG: /usr/lib/libpng.so (found version "1.6.44")
--- Found OpenGL: /usr/lib/libOpenGL.so
-GLEW_ROOT: 
--- Found GLEW: /usr/include (found version "2.2.0")
--- Could NOT find cereal (missing: cereal_DIR)
--- Looking for C++ include cereal/cereal.hpp
--- Looking for C++ include cereal/cereal.hpp - not found
-CMake Error at cmake/modules/Findcereal.cmake:21 (message):
-  Cereal library not found.  Please install the dependency.
-Call Stack (most recent call first):
-  CMakeLists.txt:544 (find_package)
-
-
--- Configuring incomplete, errors occurred!
diff --git a/cmake-build-debug/CMakeFiles/clion-environment.txt b/cmake-build-debug/CMakeFiles/clion-environment.txt
deleted file mode 100644
index 292290e6b02..00000000000
--- a/cmake-build-debug/CMakeFiles/clion-environment.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-ToolSet: 1.0 (local)Ninja: 1.12.1@/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
-Options: 
-
-Options:-DCMAKE_MAKE_PROGRAM=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
\ No newline at end of file
diff --git a/cmake-build-debug/CMakeFiles/cmake.check_cache b/cmake-build-debug/CMakeFiles/cmake.check_cache
deleted file mode 100644
index 3dccd731726..00000000000
--- a/cmake-build-debug/CMakeFiles/cmake.check_cache
+++ /dev/null
@@ -1 +0,0 @@
-# This file is generated by cmake for dependency checking of the CMakeCache.txt file

From a4f990fdd6d07885a123d4e580091db7a1139298 Mon Sep 17 00:00:00 2001
From: Ferdinand Linnenberg <ferdinand@linnenberg.dev>
Date: Sat, 7 Dec 2024 11:58:29 +0100
Subject: [PATCH 4/8] fix: reset to upstream

---
 .idea/.gitignore                     |  8 ++++++++
 .idea/OrcaSlicer.iml                 |  2 ++
 .idea/codeStyles/Project.xml         |  7 +++++++
 .idea/codeStyles/codeStyleConfig.xml |  5 +++++
 .idea/misc.xml                       |  4 ++++
 .idea/modules.xml                    |  8 ++++++++
 .idea/vcs.xml                        |  6 ++++++
 Dockerfile                           | 27 ++++++++++-----------------
 8 files changed, 50 insertions(+), 17 deletions(-)
 create mode 100644 .idea/.gitignore
 create mode 100644 .idea/OrcaSlicer.iml
 create mode 100644 .idea/codeStyles/Project.xml
 create mode 100644 .idea/codeStyles/codeStyleConfig.xml
 create mode 100644 .idea/misc.xml
 create mode 100644 .idea/modules.xml
 create mode 100644 .idea/vcs.xml

diff --git a/.idea/.gitignore b/.idea/.gitignore
new file mode 100644
index 00000000000..13566b81b01
--- /dev/null
+++ b/.idea/.gitignore
@@ -0,0 +1,8 @@
+# Default ignored files
+/shelf/
+/workspace.xml
+# Editor-based HTTP Client requests
+/httpRequests/
+# Datasource local storage ignored files
+/dataSources/
+/dataSources.local.xml
diff --git a/.idea/OrcaSlicer.iml b/.idea/OrcaSlicer.iml
new file mode 100644
index 00000000000..f08604bb65b
--- /dev/null
+++ b/.idea/OrcaSlicer.iml
@@ -0,0 +1,2 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<module classpath="CMake" type="CPP_MODULE" version="4" />
\ No newline at end of file
diff --git a/.idea/codeStyles/Project.xml b/.idea/codeStyles/Project.xml
new file mode 100644
index 00000000000..f60388162da
--- /dev/null
+++ b/.idea/codeStyles/Project.xml
@@ -0,0 +1,7 @@
+<component name="ProjectCodeStyleConfiguration">
+  <code_scheme name="Project" version="173">
+    <clangFormatSettings>
+      <option name="ENABLED" value="true" />
+    </clangFormatSettings>
+  </code_scheme>
+</component>
\ No newline at end of file
diff --git a/.idea/codeStyles/codeStyleConfig.xml b/.idea/codeStyles/codeStyleConfig.xml
new file mode 100644
index 00000000000..79ee123c2b2
--- /dev/null
+++ b/.idea/codeStyles/codeStyleConfig.xml
@@ -0,0 +1,5 @@
+<component name="ProjectCodeStyleConfiguration">
+  <state>
+    <option name="USE_PER_PROJECT_SETTINGS" value="true" />
+  </state>
+</component>
\ No newline at end of file
diff --git a/.idea/misc.xml b/.idea/misc.xml
new file mode 100644
index 00000000000..79b3c94830b
--- /dev/null
+++ b/.idea/misc.xml
@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="CMakeWorkspace" PROJECT_DIR="$PROJECT_DIR$" />
+</project>
\ No newline at end of file
diff --git a/.idea/modules.xml b/.idea/modules.xml
new file mode 100644
index 00000000000..b80725f1d91
--- /dev/null
+++ b/.idea/modules.xml
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="ProjectModuleManager">
+    <modules>
+      <module fileurl="file://$PROJECT_DIR$/.idea/OrcaSlicer.iml" filepath="$PROJECT_DIR$/.idea/OrcaSlicer.iml" />
+    </modules>
+  </component>
+</project>
\ No newline at end of file
diff --git a/.idea/vcs.xml b/.idea/vcs.xml
new file mode 100644
index 00000000000..35eb1ddfbbc
--- /dev/null
+++ b/.idea/vcs.xml
@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="VcsDirectoryMappings">
+    <mapping directory="" vcs="Git" />
+  </component>
+</project>
\ No newline at end of file
diff --git a/Dockerfile b/Dockerfile
index 5e8c8274ad8..868779b0afe 100644
--- a/Dockerfile
+++ b/Dockerfile
@@ -1,12 +1,6 @@
 FROM docker.io/ubuntu:22.04
 LABEL maintainer "DeftDawg <DeftDawg@gmail.com>"
 
-# Declare build arguments
-ARG USER=root
-ARG UID=0
-ARG GID=0
-ARG NCORES=1
-
 # Disable interactive package configuration
 RUN apt-get update && \
     echo 'debconf debconf/frontend select Noninteractive' | debconf-set-selections
@@ -15,8 +9,7 @@ RUN apt-get update && \
 RUN echo deb-src http://archive.ubuntu.com/ubuntu \
     $(cat /etc/*release | grep VERSION_CODENAME | cut -d= -f2) main universe>> /etc/apt/sources.list 
 
-# Install dependencies
-RUN apt-get update && apt-get install -y \
+RUN apt-get update && apt-get install  -y \
     autoconf \
     build-essential \
     cmake \
@@ -60,13 +53,12 @@ RUN apt-get update && apt-get install -y \
 # Change your locale here if you want.  See the output
 # of `locale -a` to pick the correct string formatting.
 ENV LC_ALL=en_US.utf8
-RUN locale-gen "$LC_ALL"
+RUN locale-gen $LC_ALL
 
 # Set this so that Orca Slicer doesn't complain about
 # the CA cert path on every startup
 ENV SSL_CERT_FILE=/etc/ssl/certs/ca-certificates.crt
 
-# Copy project files
 COPY ./ OrcaSlicer
 
 WORKDIR OrcaSlicer
@@ -91,12 +83,13 @@ RUN ./BuildLinux.sh -i
 # to keep permissions the same.  Just in case, defaults
 # are root.
 SHELL ["/bin/bash", "-l", "-c"]
+ARG USER=root
+ARG UID=0
+ARG GID=0
+RUN [[ "$UID" != "0" ]] \
+  && groupadd -f -g $GID $USER \
+  && useradd -u $UID -g $GID $USER
 
-# Create user if not root
-RUN if [ "$UID" != "0" ]; then \
-      groupadd -f -g "$GID" "$USER" && \
-      useradd -u "$UID" -g "$GID" "$USER"; \
-    fi
-
-# Set entrypoint
+# Using an entrypoint instead of CMD because the binary
+# accepts several command line arguments.
 ENTRYPOINT ["/OrcaSlicer/build/package/bin/orca-slicer"]

From 46d93bbace7e629694286834c40ae3d82ea2044e Mon Sep 17 00:00:00 2001
From: Ferdinand Linnenberg <ferdinand@linnenberg.dev>
Date: Thu, 12 Dec 2024 15:50:47 +0100
Subject: [PATCH 5/8] fix: re-add generic

---
 .idea/codeStyles/Project.xml                  |   7 -
 .../.cmake/api/v1/query/cache-v2              |   0
 .../.cmake/api/v1/query/cmakeFiles-v1         |   0
 .../.cmake/api/v1/query/codemodel-v2          |   0
 .../.cmake/api/v1/query/toolchains-v1         |   0
 cmake-build-debug/CMakeCache.txt              | 959 ++++++++++++++++++
 .../CMakeFiles/3.30.5/CMakeCCompiler.cmake    |  81 ++
 .../CMakeFiles/3.30.5/CMakeCXXCompiler.cmake  | 105 ++
 .../3.30.5/CMakeDetermineCompilerABI_C.bin    | Bin 0 -> 15448 bytes
 .../3.30.5/CMakeDetermineCompilerABI_CXX.bin  | Bin 0 -> 15464 bytes
 .../CMakeFiles/3.30.5/CMakeSystem.cmake       |  15 +
 .../3.30.5/CompilerIdC/CMakeCCompilerId.c     | 904 +++++++++++++++++
 .../CMakeFiles/3.30.5/CompilerIdC/a.out       | Bin 0 -> 15560 bytes
 .../CompilerIdCXX/CMakeCXXCompilerId.cpp      | 919 +++++++++++++++++
 .../CMakeFiles/3.30.5/CompilerIdCXX/a.out     | Bin 0 -> 15576 bytes
 .../CMakeFiles/CMakeConfigureLog.yaml         | 562 ++++++++++
 .../CMakeFiles/clion-Debug-log.txt            |  66 ++
 .../CMakeFiles/clion-environment.txt          |   4 +
 .../CMakeFiles/cmake.check_cache              |   1 +
 resources/profiles/BBL.json                   |  12 +
 20 files changed, 3628 insertions(+), 7 deletions(-)
 delete mode 100644 .idea/codeStyles/Project.xml
 create mode 100644 cmake-build-debug/.cmake/api/v1/query/cache-v2
 create mode 100644 cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1
 create mode 100644 cmake-build-debug/.cmake/api/v1/query/codemodel-v2
 create mode 100644 cmake-build-debug/.cmake/api/v1/query/toolchains-v1
 create mode 100644 cmake-build-debug/CMakeCache.txt
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
 create mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin
 create mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
 create mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
 create mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
 create mode 100644 cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
 create mode 100644 cmake-build-debug/CMakeFiles/clion-Debug-log.txt
 create mode 100644 cmake-build-debug/CMakeFiles/clion-environment.txt
 create mode 100644 cmake-build-debug/CMakeFiles/cmake.check_cache

diff --git a/.idea/codeStyles/Project.xml b/.idea/codeStyles/Project.xml
deleted file mode 100644
index f60388162da..00000000000
--- a/.idea/codeStyles/Project.xml
+++ /dev/null
@@ -1,7 +0,0 @@
-<component name="ProjectCodeStyleConfiguration">
-  <code_scheme name="Project" version="173">
-    <clangFormatSettings>
-      <option name="ENABLED" value="true" />
-    </clangFormatSettings>
-  </code_scheme>
-</component>
\ No newline at end of file
diff --git a/cmake-build-debug/.cmake/api/v1/query/cache-v2 b/cmake-build-debug/.cmake/api/v1/query/cache-v2
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1 b/cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/cmake-build-debug/.cmake/api/v1/query/codemodel-v2 b/cmake-build-debug/.cmake/api/v1/query/codemodel-v2
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/cmake-build-debug/.cmake/api/v1/query/toolchains-v1 b/cmake-build-debug/.cmake/api/v1/query/toolchains-v1
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/cmake-build-debug/CMakeCache.txt b/cmake-build-debug/CMakeCache.txt
new file mode 100644
index 00000000000..001e9469232
--- /dev/null
+++ b/cmake-build-debug/CMakeCache.txt
@@ -0,0 +1,959 @@
+# This is the CMakeCache file.
+# For build in directory: /home/scarjit/Git/OrcaSlicer/cmake-build-debug
+# It was generated by CMake: /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake
+# You can edit this file to change values found and used by cmake.
+# If you do not want to change any of the values, simply exit the editor.
+# If you do want to change a value, simply edit, save, and exit the editor.
+# The syntax for the file is as follows:
+# KEY:TYPE=VALUE
+# KEY is the name of a variable in the cache.
+# TYPE is a hint to GUIs for the type of VALUE, DO NOT EDIT TYPE!.
+# VALUE is the current value for the KEY.
+
+########################
+# EXTERNAL cache entries
+########################
+
+Boost_ATOMIC_LIBRARY_RELEASE:STRING=/usr/lib/libboost_atomic.so.1.86.0
+
+Boost_CHRONO_LIBRARY_RELEASE:STRING=/usr/lib/libboost_chrono.so.1.86.0
+
+Boost_DATE_TIME_LIBRARY_RELEASE:STRING=/usr/lib/libboost_date_time.so.1.86.0
+
+//The directory containing a CMake configuration file for Boost.
+Boost_DIR:PATH=/usr/lib/cmake/Boost-1.86.0
+
+Boost_FILESYSTEM_LIBRARY_RELEASE:STRING=/usr/lib/libboost_filesystem.so.1.86.0
+
+//Path to a file.
+Boost_INCLUDE_DIR:PATH=/usr/include
+
+Boost_IOSTREAMS_LIBRARY_RELEASE:STRING=/usr/lib/libboost_iostreams.so.1.86.0
+
+Boost_LOCALE_LIBRARY_RELEASE:STRING=/usr/lib/libboost_locale.so.1.86.0
+
+Boost_LOG_LIBRARY_RELEASE:STRING=/usr/lib/libboost_log.so.1.86.0
+
+Boost_PROGRAM_OPTIONS_LIBRARY_RELEASE:STRING=/usr/lib/libboost_program_options.so.1.86.0
+
+Boost_REGEX_LIBRARY_RELEASE:STRING=/usr/lib/libboost_regex.so.1.86.0
+
+Boost_SYSTEM_LIBRARY_RELEASE:STRING=/usr/lib/libboost_system.so.1.86.0
+
+Boost_THREAD_LIBRARY_RELEASE:STRING=/usr/lib/libboost_thread.so.1.86.0
+
+//Path to a program.
+CMAKE_ADDR2LINE:FILEPATH=/usr/bin/addr2line
+
+//Path to a program.
+CMAKE_AR:FILEPATH=/usr/bin/ar
+
+//Choose the type of build, options are: None Debug Release RelWithDebInfo
+// MinSizeRel ...
+CMAKE_BUILD_TYPE:STRING=Debug
+
+//Enable colored diagnostics throughout.
+CMAKE_COLOR_DIAGNOSTICS:BOOL=ON
+
+//CXX compiler
+CMAKE_CXX_COMPILER:FILEPATH=/usr/bin/c++
+
+//A wrapper around 'ar' adding the appropriate '--plugin' option
+// for the GCC compiler
+CMAKE_CXX_COMPILER_AR:FILEPATH=/usr/bin/gcc-ar
+
+//A wrapper around 'ranlib' adding the appropriate '--plugin' option
+// for the GCC compiler
+CMAKE_CXX_COMPILER_RANLIB:FILEPATH=/usr/bin/gcc-ranlib
+
+//Flags used by the CXX compiler during all build types.
+CMAKE_CXX_FLAGS:STRING=
+
+//Flags used by the CXX compiler during DEBUG builds.
+CMAKE_CXX_FLAGS_DEBUG:STRING=-g
+
+//Flags used by the CXX compiler during MINSIZEREL builds.
+CMAKE_CXX_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG
+
+//Flags used by the CXX compiler during RELEASE builds.
+CMAKE_CXX_FLAGS_RELEASE:STRING=-O3 -DNDEBUG
+
+//Flags used by the CXX compiler during RELWITHDEBINFO builds.
+CMAKE_CXX_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG
+
+//C compiler
+CMAKE_C_COMPILER:FILEPATH=/usr/bin/cc
+
+//A wrapper around 'ar' adding the appropriate '--plugin' option
+// for the GCC compiler
+CMAKE_C_COMPILER_AR:FILEPATH=/usr/bin/gcc-ar
+
+//A wrapper around 'ranlib' adding the appropriate '--plugin' option
+// for the GCC compiler
+CMAKE_C_COMPILER_RANLIB:FILEPATH=/usr/bin/gcc-ranlib
+
+//Flags used by the C compiler during all build types.
+CMAKE_C_FLAGS:STRING=
+
+//Flags used by the C compiler during DEBUG builds.
+CMAKE_C_FLAGS_DEBUG:STRING=-g
+
+//Flags used by the C compiler during MINSIZEREL builds.
+CMAKE_C_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG
+
+//Flags used by the C compiler during RELEASE builds.
+CMAKE_C_FLAGS_RELEASE:STRING=-O3 -DNDEBUG
+
+//Flags used by the C compiler during RELWITHDEBINFO builds.
+CMAKE_C_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG
+
+//Path to a program.
+CMAKE_DLLTOOL:FILEPATH=CMAKE_DLLTOOL-NOTFOUND
+
+//Flags used by the linker during all build types.
+CMAKE_EXE_LINKER_FLAGS:STRING=
+
+//Flags used by the linker during DEBUG builds.
+CMAKE_EXE_LINKER_FLAGS_DEBUG:STRING=
+
+//Flags used by the linker during MINSIZEREL builds.
+CMAKE_EXE_LINKER_FLAGS_MINSIZEREL:STRING=
+
+//Flags used by the linker during RELEASE builds.
+CMAKE_EXE_LINKER_FLAGS_RELEASE:STRING=
+
+//Flags used by the linker during RELWITHDEBINFO builds.
+CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO:STRING=
+
+//Enable/Disable output of compile commands during generation.
+CMAKE_EXPORT_COMPILE_COMMANDS:BOOL=
+
+//Value Computed by CMake.
+CMAKE_FIND_PACKAGE_REDIRECTS_DIR:STATIC=/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/pkgRedirects
+
+//User executables (bin)
+CMAKE_INSTALL_BINDIR:PATH=bin
+
+//Read-only architecture-independent data (DATAROOTDIR)
+CMAKE_INSTALL_DATADIR:PATH=
+
+//Read-only architecture-independent data root (share)
+CMAKE_INSTALL_DATAROOTDIR:PATH=share
+
+//Documentation root (DATAROOTDIR/doc/PROJECT_NAME)
+CMAKE_INSTALL_DOCDIR:PATH=
+
+//C header files (include)
+CMAKE_INSTALL_INCLUDEDIR:PATH=include
+
+//Info documentation (DATAROOTDIR/info)
+CMAKE_INSTALL_INFODIR:PATH=
+
+//Object code libraries (lib)
+CMAKE_INSTALL_LIBDIR:PATH=lib
+
+//Program executables (libexec)
+CMAKE_INSTALL_LIBEXECDIR:PATH=libexec
+
+//Locale-dependent data (DATAROOTDIR/locale)
+CMAKE_INSTALL_LOCALEDIR:PATH=
+
+//Modifiable single-machine data (var)
+CMAKE_INSTALL_LOCALSTATEDIR:PATH=var
+
+//Man documentation (DATAROOTDIR/man)
+CMAKE_INSTALL_MANDIR:PATH=
+
+//C header files for non-gcc (/usr/include)
+CMAKE_INSTALL_OLDINCLUDEDIR:PATH=/usr/include
+
+//Install path prefix, prepended onto install directories.
+CMAKE_INSTALL_PREFIX:PATH=/usr/local
+
+//Run-time variable data (LOCALSTATEDIR/run)
+CMAKE_INSTALL_RUNSTATEDIR:PATH=
+
+//System admin executables (sbin)
+CMAKE_INSTALL_SBINDIR:PATH=sbin
+
+//Modifiable architecture-independent data (com)
+CMAKE_INSTALL_SHAREDSTATEDIR:PATH=com
+
+//Read-only single-machine data (etc)
+CMAKE_INSTALL_SYSCONFDIR:PATH=etc
+
+//Path to a program.
+CMAKE_LINKER:FILEPATH=/usr/bin/ld
+
+//No help, variable specified on the command line.
+CMAKE_MAKE_PROGRAM:UNINITIALIZED=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
+
+//Flags used by the linker during the creation of modules during
+// all build types.
+CMAKE_MODULE_LINKER_FLAGS:STRING=
+
+//Flags used by the linker during the creation of modules during
+// DEBUG builds.
+CMAKE_MODULE_LINKER_FLAGS_DEBUG:STRING=
+
+//Flags used by the linker during the creation of modules during
+// MINSIZEREL builds.
+CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL:STRING=
+
+//Flags used by the linker during the creation of modules during
+// RELEASE builds.
+CMAKE_MODULE_LINKER_FLAGS_RELEASE:STRING=
+
+//Flags used by the linker during the creation of modules during
+// RELWITHDEBINFO builds.
+CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO:STRING=
+
+//Path to a program.
+CMAKE_NM:FILEPATH=/usr/bin/nm
+
+//Path to a program.
+CMAKE_OBJCOPY:FILEPATH=/usr/bin/objcopy
+
+//Path to a program.
+CMAKE_OBJDUMP:FILEPATH=/usr/bin/objdump
+
+//Value Computed by CMake
+CMAKE_PROJECT_DESCRIPTION:STATIC=
+
+//Value Computed by CMake
+CMAKE_PROJECT_HOMEPAGE_URL:STATIC=
+
+//Value Computed by CMake
+CMAKE_PROJECT_NAME:STATIC=OrcaSlicer
+
+//Path to a program.
+CMAKE_RANLIB:FILEPATH=/usr/bin/ranlib
+
+//Path to a program.
+CMAKE_READELF:FILEPATH=/usr/bin/readelf
+
+//Flags used by the linker during the creation of shared libraries
+// during all build types.
+CMAKE_SHARED_LINKER_FLAGS:STRING=
+
+//Flags used by the linker during the creation of shared libraries
+// during DEBUG builds.
+CMAKE_SHARED_LINKER_FLAGS_DEBUG:STRING=
+
+//Flags used by the linker during the creation of shared libraries
+// during MINSIZEREL builds.
+CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL:STRING=
+
+//Flags used by the linker during the creation of shared libraries
+// during RELEASE builds.
+CMAKE_SHARED_LINKER_FLAGS_RELEASE:STRING=
+
+//Flags used by the linker during the creation of shared libraries
+// during RELWITHDEBINFO builds.
+CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO:STRING=
+
+//If set, runtime paths are not added when installing shared libraries,
+// but are added when building.
+CMAKE_SKIP_INSTALL_RPATH:BOOL=NO
+
+//If set, runtime paths are not added when using shared libraries.
+CMAKE_SKIP_RPATH:BOOL=NO
+
+//Flags used by the linker during the creation of static libraries
+// during all build types.
+CMAKE_STATIC_LINKER_FLAGS:STRING=
+
+//Flags used by the linker during the creation of static libraries
+// during DEBUG builds.
+CMAKE_STATIC_LINKER_FLAGS_DEBUG:STRING=
+
+//Flags used by the linker during the creation of static libraries
+// during MINSIZEREL builds.
+CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL:STRING=
+
+//Flags used by the linker during the creation of static libraries
+// during RELEASE builds.
+CMAKE_STATIC_LINKER_FLAGS_RELEASE:STRING=
+
+//Flags used by the linker during the creation of static libraries
+// during RELWITHDEBINFO builds.
+CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO:STRING=
+
+//Path to a program.
+CMAKE_STRIP:FILEPATH=/usr/bin/strip
+
+//Path to a program.
+CMAKE_TAPI:FILEPATH=CMAKE_TAPI-NOTFOUND
+
+//If this value is on, makefiles will be generated without the
+// .SILENT directive, and all commands will be echoed to the console
+// during the make.  This is useful for debugging only. With Visual
+// Studio IDE projects all commands are done without /nologo.
+CMAKE_VERBOSE_MAKEFILE:BOOL=FALSE
+
+//Path to a file.
+CURL_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+CURL_LIBRARY_DEBUG:FILEPATH=CURL_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+CURL_LIBRARY_RELEASE:FILEPATH=/usr/lib/libcurl.so
+
+//Path to a file.
+DBUS_ARCH_INCLUDE_DIR:PATH=/usr/lib/dbus-1.0/include
+
+//Path to a file.
+DBUS_INCLUDE_DIR:PATH=/usr/include/dbus-1.0
+
+//Path to a library.
+DBUS_LIBRARIES:FILEPATH=/usr/lib/libdbus-1.so
+
+//Path to a file.
+EIGEN3_INCLUDE_DIR:PATH=/usr/include/eigen3
+
+//Path to a file.
+EXPAT_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+EXPAT_LIBRARY_DEBUG:FILEPATH=EXPAT_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+EXPAT_LIBRARY_RELEASE:FILEPATH=/usr/lib/libexpat.so
+
+//Path to a file.
+GLEW_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+GLEW_SHARED_LIBRARY_DEBUG:FILEPATH=GLEW_SHARED_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+GLEW_SHARED_LIBRARY_RELEASE:FILEPATH=/usr/lib/libGLEW.so
+
+//Path to a library.
+GLEW_STATIC_LIBRARY_DEBUG:FILEPATH=GLEW_STATIC_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+GLEW_STATIC_LIBRARY_RELEASE:FILEPATH=GLEW_STATIC_LIBRARY_RELEASE-NOTFOUND
+
+//Path to a file.
+OPENGL_EGL_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_GLES2_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_GLES3_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_GLU_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_GLX_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+OPENGL_egl_LIBRARY:FILEPATH=/usr/lib/libEGL.so
+
+//Path to a library.
+OPENGL_gl_LIBRARY:FILEPATH=/usr/lib/libGL.so
+
+//Path to a library.
+OPENGL_gles2_LIBRARY:FILEPATH=/usr/lib/libGLESv2.so
+
+//Path to a library.
+OPENGL_gles3_LIBRARY:FILEPATH=/usr/lib/libGLESv2.so
+
+//Path to a library.
+OPENGL_glu_LIBRARY:FILEPATH=/usr/lib/libGLU.so
+
+//Path to a library.
+OPENGL_glx_LIBRARY:FILEPATH=/usr/lib/libGLX.so
+
+//Path to a library.
+OPENGL_opengl_LIBRARY:FILEPATH=/usr/lib/libOpenGL.so
+
+//Path to a file.
+OPENGL_xmesa_INCLUDE_DIR:PATH=OPENGL_xmesa_INCLUDE_DIR-NOTFOUND
+
+//Path to a library.
+OPENSSL_CRYPTO_LIBRARY:FILEPATH=/usr/lib/libcrypto.so
+
+//Path to a file.
+OPENSSL_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+OPENSSL_SSL_LIBRARY:FILEPATH=/usr/lib/libssl.so
+
+//Path to OpenVDB installation's find modules.
+OPENVDB_FIND_MODULE_PATH:PATH=
+
+//Build Orca tools
+ORCA_TOOLS:BOOL=OFF
+
+//Value Computed by CMake
+OrcaSlicer_BINARY_DIR:STATIC=/home/scarjit/Git/OrcaSlicer/cmake-build-debug
+
+//Value Computed by CMake
+OrcaSlicer_IS_TOP_LEVEL:STATIC=ON
+
+//Value Computed by CMake
+OrcaSlicer_SOURCE_DIR:STATIC=/home/scarjit/Git/OrcaSlicer
+
+//Arguments to supply to pkg-config
+PKG_CONFIG_ARGN:STRING=
+
+//pkg-config executable
+PKG_CONFIG_EXECUTABLE:FILEPATH=/usr/bin/pkg-config
+
+//Path to a library.
+PNG_LIBRARY_DEBUG:FILEPATH=PNG_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+PNG_LIBRARY_RELEASE:FILEPATH=/usr/lib/libpng.so
+
+//Path to a file.
+PNG_PNG_INCLUDE_DIR:PATH=/usr/include
+
+//Enable ASan on Clang and GCC
+SLIC3R_ASAN:BOOL=OFF
+
+//Build development sandboxes
+SLIC3R_BUILD_SANDBOXES:BOOL=OFF
+
+//Build unit tests
+SLIC3R_BUILD_TESTS:BOOL=OFF
+
+//Allow perfoming desktop integration during runtime
+SLIC3R_DESKTOP_INTEGRATION:BOOL=ON
+
+//Assume OrcaSlicer is to be installed in a FHS directory structure
+SLIC3R_FHS:BOOL=OFF
+
+//GTK version to use with wxWidgets on Linux
+SLIC3R_GTK:STRING=2
+
+//Compile OrcaSlicer with GUI components (OpenGL, wxWidgets)
+SLIC3R_GUI:BOOL=ON
+
+//Compile on Visual Studio in parallel
+SLIC3R_MSVC_COMPILE_PARALLEL:BOOL=ON
+
+//Generate PDB files on MSVC in Release mode
+SLIC3R_MSVC_PDB:BOOL=ON
+
+//Use precompiled headers
+SLIC3R_PCH:BOOL=ON
+
+//Compile XS Perl module and enable Perl unit and integration tests
+SLIC3R_PERL_XS:BOOL=OFF
+
+//Compile OrcaSlicer with an invasive Shiny profiler
+SLIC3R_PROFILE:BOOL=OFF
+
+//Compile OrcaSlicer with static libraries (Boost, TBB, glew)
+SLIC3R_STATIC:BOOL=OFF
+
+//Build against wxWidgets stable (3.0) as oppsed to dev (3.1) on
+// Linux
+SLIC3R_WX_STABLE:BOOL=OFF
+
+//The directory containing a CMake configuration file for TBB.
+TBB_DIR:PATH=/usr/lib/cmake/TBB
+
+//Path to a file.
+ZLIB_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+ZLIB_LIBRARY_DEBUG:FILEPATH=ZLIB_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+ZLIB_LIBRARY_RELEASE:FILEPATH=/usr/lib/libz.so
+
+//The directory containing a CMake configuration file for boost_atomic.
+boost_atomic_DIR:PATH=/usr/lib/cmake/boost_atomic-1.86.0
+
+//The directory containing a CMake configuration file for boost_chrono.
+boost_chrono_DIR:PATH=/usr/lib/cmake/boost_chrono-1.86.0
+
+//The directory containing a CMake configuration file for boost_date_time.
+boost_date_time_DIR:PATH=/usr/lib/cmake/boost_date_time-1.86.0
+
+//The directory containing a CMake configuration file for boost_filesystem.
+boost_filesystem_DIR:PATH=/usr/lib/cmake/boost_filesystem-1.86.0
+
+//The directory containing a CMake configuration file for boost_headers.
+boost_headers_DIR:PATH=/usr/lib/cmake/boost_headers-1.86.0
+
+//The directory containing a CMake configuration file for boost_iostreams.
+boost_iostreams_DIR:PATH=/usr/lib/cmake/boost_iostreams-1.86.0
+
+//The directory containing a CMake configuration file for boost_locale.
+boost_locale_DIR:PATH=/usr/lib/cmake/boost_locale-1.86.0
+
+//The directory containing a CMake configuration file for boost_log.
+boost_log_DIR:PATH=/usr/lib/cmake/boost_log-1.86.0
+
+//The directory containing a CMake configuration file for boost_program_options.
+boost_program_options_DIR:PATH=/usr/lib/cmake/boost_program_options-1.86.0
+
+//The directory containing a CMake configuration file for boost_regex.
+boost_regex_DIR:PATH=/usr/lib/cmake/boost_regex-1.86.0
+
+//The directory containing a CMake configuration file for boost_system.
+boost_system_DIR:PATH=/usr/lib/cmake/boost_system-1.86.0
+
+//The directory containing a CMake configuration file for boost_thread.
+boost_thread_DIR:PATH=/usr/lib/cmake/boost_thread-1.86.0
+
+//The directory containing a CMake configuration file for cereal.
+cereal_DIR:PATH=cereal_DIR-NOTFOUND
+
+//The directory containing a CMake configuration file for glfw3.
+glfw3_DIR:PATH=/usr/lib/cmake/glfw3
+
+//Path to a library.
+pkgcfg_lib_PC_DBUS_dbus-1:FILEPATH=/usr/lib/libdbus-1.so
+
+//Path to a library.
+pkgcfg_lib_PC_EXPAT_expat:FILEPATH=/usr/lib/libexpat.so
+
+//Path to a library.
+pkgcfg_lib__OPENSSL_crypto:FILEPATH=/usr/lib/libcrypto.so
+
+//Path to a library.
+pkgcfg_lib__OPENSSL_ssl:FILEPATH=/usr/lib/libssl.so
+
+
+########################
+# INTERNAL cache entries
+########################
+
+//ADVANCED property for variable: Boost_DIR
+Boost_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_ADDR2LINE
+CMAKE_ADDR2LINE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_AR
+CMAKE_AR-ADVANCED:INTERNAL=1
+//This is the directory where this CMakeCache.txt was created
+CMAKE_CACHEFILE_DIR:INTERNAL=/home/scarjit/Git/OrcaSlicer/cmake-build-debug
+//Major version of cmake used to create the current loaded cache
+CMAKE_CACHE_MAJOR_VERSION:INTERNAL=3
+//Minor version of cmake used to create the current loaded cache
+CMAKE_CACHE_MINOR_VERSION:INTERNAL=30
+//Patch version of cmake used to create the current loaded cache
+CMAKE_CACHE_PATCH_VERSION:INTERNAL=5
+//Path to CMake executable.
+CMAKE_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake
+//Path to cpack program executable.
+CMAKE_CPACK_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cpack
+//Path to ctest program executable.
+CMAKE_CTEST_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/ctest
+//ADVANCED property for variable: CMAKE_CXX_COMPILER
+CMAKE_CXX_COMPILER-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_COMPILER_AR
+CMAKE_CXX_COMPILER_AR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_COMPILER_RANLIB
+CMAKE_CXX_COMPILER_RANLIB-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS
+CMAKE_CXX_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS_DEBUG
+CMAKE_CXX_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS_MINSIZEREL
+CMAKE_CXX_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELEASE
+CMAKE_CXX_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELWITHDEBINFO
+CMAKE_CXX_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_COMPILER
+CMAKE_C_COMPILER-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_COMPILER_AR
+CMAKE_C_COMPILER_AR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_COMPILER_RANLIB
+CMAKE_C_COMPILER_RANLIB-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS
+CMAKE_C_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS_DEBUG
+CMAKE_C_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS_MINSIZEREL
+CMAKE_C_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS_RELEASE
+CMAKE_C_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS_RELWITHDEBINFO
+CMAKE_C_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_DLLTOOL
+CMAKE_DLLTOOL-ADVANCED:INTERNAL=1
+//Executable file format
+CMAKE_EXECUTABLE_FORMAT:INTERNAL=ELF
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS
+CMAKE_EXE_LINKER_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_DEBUG
+CMAKE_EXE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_MINSIZEREL
+CMAKE_EXE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELEASE
+CMAKE_EXE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO
+CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXPORT_COMPILE_COMMANDS
+CMAKE_EXPORT_COMPILE_COMMANDS-ADVANCED:INTERNAL=1
+//Name of external makefile project generator.
+CMAKE_EXTRA_GENERATOR:INTERNAL=
+//Name of generator.
+CMAKE_GENERATOR:INTERNAL=Ninja
+//Generator instance identifier.
+CMAKE_GENERATOR_INSTANCE:INTERNAL=
+//Name of generator platform.
+CMAKE_GENERATOR_PLATFORM:INTERNAL=
+//Name of generator toolset.
+CMAKE_GENERATOR_TOOLSET:INTERNAL=
+//Test CMAKE_HAVE_LIBC_PTHREAD
+CMAKE_HAVE_LIBC_PTHREAD:INTERNAL=1
+//Source directory with the top level CMakeLists.txt file for this
+// project
+CMAKE_HOME_DIRECTORY:INTERNAL=/home/scarjit/Git/OrcaSlicer
+//ADVANCED property for variable: CMAKE_INSTALL_BINDIR
+CMAKE_INSTALL_BINDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_DATADIR
+CMAKE_INSTALL_DATADIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_DATAROOTDIR
+CMAKE_INSTALL_DATAROOTDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_DOCDIR
+CMAKE_INSTALL_DOCDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_INCLUDEDIR
+CMAKE_INSTALL_INCLUDEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_INFODIR
+CMAKE_INSTALL_INFODIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_LIBDIR
+CMAKE_INSTALL_LIBDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_LIBEXECDIR
+CMAKE_INSTALL_LIBEXECDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_LOCALEDIR
+CMAKE_INSTALL_LOCALEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_LOCALSTATEDIR
+CMAKE_INSTALL_LOCALSTATEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_MANDIR
+CMAKE_INSTALL_MANDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_OLDINCLUDEDIR
+CMAKE_INSTALL_OLDINCLUDEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_RUNSTATEDIR
+CMAKE_INSTALL_RUNSTATEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_SBINDIR
+CMAKE_INSTALL_SBINDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_SHAREDSTATEDIR
+CMAKE_INSTALL_SHAREDSTATEDIR-ADVANCED:INTERNAL=1
+//Install .so files without execute permission.
+CMAKE_INSTALL_SO_NO_EXE:INTERNAL=0
+//ADVANCED property for variable: CMAKE_INSTALL_SYSCONFDIR
+CMAKE_INSTALL_SYSCONFDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_LINKER
+CMAKE_LINKER-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS
+CMAKE_MODULE_LINKER_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_DEBUG
+CMAKE_MODULE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL
+CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELEASE
+CMAKE_MODULE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO
+CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_NM
+CMAKE_NM-ADVANCED:INTERNAL=1
+//number of local generators
+CMAKE_NUMBER_OF_MAKEFILES:INTERNAL=1
+//ADVANCED property for variable: CMAKE_OBJCOPY
+CMAKE_OBJCOPY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_OBJDUMP
+CMAKE_OBJDUMP-ADVANCED:INTERNAL=1
+//Platform information initialized
+CMAKE_PLATFORM_INFO_INITIALIZED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_RANLIB
+CMAKE_RANLIB-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_READELF
+CMAKE_READELF-ADVANCED:INTERNAL=1
+//Path to CMake installation.
+CMAKE_ROOT:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS
+CMAKE_SHARED_LINKER_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_DEBUG
+CMAKE_SHARED_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL
+CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELEASE
+CMAKE_SHARED_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO
+CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SKIP_INSTALL_RPATH
+CMAKE_SKIP_INSTALL_RPATH-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SKIP_RPATH
+CMAKE_SKIP_RPATH-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS
+CMAKE_STATIC_LINKER_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_DEBUG
+CMAKE_STATIC_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL
+CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELEASE
+CMAKE_STATIC_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO
+CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STRIP
+CMAKE_STRIP-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_TAPI
+CMAKE_TAPI-ADVANCED:INTERNAL=1
+//uname command
+CMAKE_UNAME:INTERNAL=/usr/bin/uname
+//ADVANCED property for variable: CMAKE_VERBOSE_MAKEFILE
+CMAKE_VERBOSE_MAKEFILE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CURL_INCLUDE_DIR
+CURL_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CURL_LIBRARY_DEBUG
+CURL_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CURL_LIBRARY_RELEASE
+CURL_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: EIGEN3_INCLUDE_DIR
+EIGEN3_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: EXPAT_INCLUDE_DIR
+EXPAT_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: EXPAT_LIBRARY_DEBUG
+EXPAT_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: EXPAT_LIBRARY_RELEASE
+EXPAT_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//Details about finding Boost
+FIND_PACKAGE_MESSAGE_DETAILS_Boost:INTERNAL=[/usr/lib/cmake/Boost-1.86.0/BoostConfig.cmake][cfound components: system filesystem thread log locale regex chrono atomic date_time iostreams program_options ][v1.86.0(1.66)]
+//Details about finding CURL
+FIND_PACKAGE_MESSAGE_DETAILS_CURL:INTERNAL=[/usr/lib/libcurl.so][/usr/include][v8.11.1()]
+//Details about finding DBus
+FIND_PACKAGE_MESSAGE_DETAILS_DBus:INTERNAL=[/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include][/usr/lib/libdbus-1.so][v()]
+//Details about finding EXPAT
+FIND_PACKAGE_MESSAGE_DETAILS_EXPAT:INTERNAL=[/usr/lib/libexpat.so][/usr/include][v2.6.4()]
+//Details about finding Eigen3
+FIND_PACKAGE_MESSAGE_DETAILS_Eigen3:INTERNAL=[/usr/include/eigen3][TRUE][v(3.3)]
+//Details about finding GLEW
+FIND_PACKAGE_MESSAGE_DETAILS_GLEW:INTERNAL=[/usr/include][/usr/lib/libGLEW.so][v2.2.0()]
+//Details about finding OpenGL
+FIND_PACKAGE_MESSAGE_DETAILS_OpenGL:INTERNAL=[/usr/lib/libOpenGL.so][/usr/lib/libGLX.so][/usr/include][c ][v()]
+//Details about finding OpenSSL
+FIND_PACKAGE_MESSAGE_DETAILS_OpenSSL:INTERNAL=[/usr/lib/libcrypto.so][/usr/include][c ][v3.4.0()]
+//Details about finding PNG
+FIND_PACKAGE_MESSAGE_DETAILS_PNG:INTERNAL=[/usr/lib/libpng.so][/usr/include][v1.6.44()]
+//Details about finding PkgConfig
+FIND_PACKAGE_MESSAGE_DETAILS_PkgConfig:INTERNAL=[/usr/bin/pkg-config][v2.3.0()]
+//Details about finding Threads
+FIND_PACKAGE_MESSAGE_DETAILS_Threads:INTERNAL=[TRUE][v()]
+//Details about finding ZLIB
+FIND_PACKAGE_MESSAGE_DETAILS_ZLIB:INTERNAL=[/usr/lib/libz.so][/usr/include][c ][v1.3.1()]
+//ADVANCED property for variable: GLEW_INCLUDE_DIR
+GLEW_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: GLEW_SHARED_LIBRARY_DEBUG
+GLEW_SHARED_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: GLEW_SHARED_LIBRARY_RELEASE
+GLEW_SHARED_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: GLEW_STATIC_LIBRARY_DEBUG
+GLEW_STATIC_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: GLEW_STATIC_LIBRARY_RELEASE
+GLEW_STATIC_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//Have include cereal/cereal.hpp
+HAVE_CEREAL_H:INTERNAL=
+//ADVANCED property for variable: OPENGL_EGL_INCLUDE_DIR
+OPENGL_EGL_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_GLES2_INCLUDE_DIR
+OPENGL_GLES2_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_GLES3_INCLUDE_DIR
+OPENGL_GLES3_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_GLU_INCLUDE_DIR
+OPENGL_GLU_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_GLX_INCLUDE_DIR
+OPENGL_GLX_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_INCLUDE_DIR
+OPENGL_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_egl_LIBRARY
+OPENGL_egl_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_gl_LIBRARY
+OPENGL_gl_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_gles2_LIBRARY
+OPENGL_gles2_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_gles3_LIBRARY
+OPENGL_gles3_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_glu_LIBRARY
+OPENGL_glu_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_glx_LIBRARY
+OPENGL_glx_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_opengl_LIBRARY
+OPENGL_opengl_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_xmesa_INCLUDE_DIR
+OPENGL_xmesa_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENSSL_CRYPTO_LIBRARY
+OPENSSL_CRYPTO_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENSSL_INCLUDE_DIR
+OPENSSL_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENSSL_SSL_LIBRARY
+OPENSSL_SSL_LIBRARY-ADVANCED:INTERNAL=1
+PC_DBUS_CFLAGS:INTERNAL=-I/usr/include/dbus-1.0;-I/usr/lib/dbus-1.0/include
+PC_DBUS_CFLAGS_I:INTERNAL=
+PC_DBUS_CFLAGS_OTHER:INTERNAL=
+PC_DBUS_FOUND:INTERNAL=1
+PC_DBUS_INCLUDEDIR:INTERNAL=/usr/include
+PC_DBUS_INCLUDE_DIRS:INTERNAL=/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
+PC_DBUS_LDFLAGS:INTERNAL=-L/usr/lib;-ldbus-1
+PC_DBUS_LDFLAGS_OTHER:INTERNAL=
+PC_DBUS_LIBDIR:INTERNAL=/usr/lib
+PC_DBUS_LIBRARIES:INTERNAL=dbus-1
+PC_DBUS_LIBRARY_DIRS:INTERNAL=/usr/lib
+PC_DBUS_LIBS:INTERNAL=
+PC_DBUS_LIBS_L:INTERNAL=
+PC_DBUS_LIBS_OTHER:INTERNAL=
+PC_DBUS_LIBS_PATHS:INTERNAL=
+PC_DBUS_MODULE_NAME:INTERNAL=dbus-1
+PC_DBUS_PREFIX:INTERNAL=/usr
+PC_DBUS_STATIC_CFLAGS:INTERNAL=-I/usr/include/dbus-1.0;-I/usr/lib/dbus-1.0/include
+PC_DBUS_STATIC_CFLAGS_I:INTERNAL=
+PC_DBUS_STATIC_CFLAGS_OTHER:INTERNAL=
+PC_DBUS_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
+PC_DBUS_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-ldbus-1;-lsystemd
+PC_DBUS_STATIC_LDFLAGS_OTHER:INTERNAL=
+PC_DBUS_STATIC_LIBDIR:INTERNAL=
+PC_DBUS_STATIC_LIBRARIES:INTERNAL=dbus-1;systemd
+PC_DBUS_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
+PC_DBUS_STATIC_LIBS:INTERNAL=
+PC_DBUS_STATIC_LIBS_L:INTERNAL=
+PC_DBUS_STATIC_LIBS_OTHER:INTERNAL=
+PC_DBUS_STATIC_LIBS_PATHS:INTERNAL=
+PC_DBUS_VERSION:INTERNAL=1.14.10
+PC_DBUS_dbus-1_INCLUDEDIR:INTERNAL=
+PC_DBUS_dbus-1_LIBDIR:INTERNAL=
+PC_DBUS_dbus-1_PREFIX:INTERNAL=
+PC_DBUS_dbus-1_VERSION:INTERNAL=
+PC_EXPAT_CFLAGS:INTERNAL=-I/usr/include
+PC_EXPAT_CFLAGS_I:INTERNAL=
+PC_EXPAT_CFLAGS_OTHER:INTERNAL=
+PC_EXPAT_FOUND:INTERNAL=1
+PC_EXPAT_INCLUDEDIR:INTERNAL=/usr/include
+PC_EXPAT_INCLUDE_DIRS:INTERNAL=/usr/include
+PC_EXPAT_LDFLAGS:INTERNAL=-L/usr/lib;-lexpat
+PC_EXPAT_LDFLAGS_OTHER:INTERNAL=
+PC_EXPAT_LIBDIR:INTERNAL=/usr/lib
+PC_EXPAT_LIBRARIES:INTERNAL=expat
+PC_EXPAT_LIBRARY_DIRS:INTERNAL=/usr/lib
+PC_EXPAT_LIBS:INTERNAL=
+PC_EXPAT_LIBS_L:INTERNAL=
+PC_EXPAT_LIBS_OTHER:INTERNAL=
+PC_EXPAT_LIBS_PATHS:INTERNAL=
+PC_EXPAT_MODULE_NAME:INTERNAL=expat
+PC_EXPAT_PREFIX:INTERNAL=/usr
+PC_EXPAT_STATIC_CFLAGS:INTERNAL=-I/usr/include;-DXML_STATIC
+PC_EXPAT_STATIC_CFLAGS_I:INTERNAL=
+PC_EXPAT_STATIC_CFLAGS_OTHER:INTERNAL=-DXML_STATIC
+PC_EXPAT_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include
+PC_EXPAT_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-lexpat;-lm
+PC_EXPAT_STATIC_LDFLAGS_OTHER:INTERNAL=
+PC_EXPAT_STATIC_LIBDIR:INTERNAL=
+PC_EXPAT_STATIC_LIBRARIES:INTERNAL=expat;m
+PC_EXPAT_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
+PC_EXPAT_STATIC_LIBS:INTERNAL=
+PC_EXPAT_STATIC_LIBS_L:INTERNAL=
+PC_EXPAT_STATIC_LIBS_OTHER:INTERNAL=
+PC_EXPAT_STATIC_LIBS_PATHS:INTERNAL=
+PC_EXPAT_VERSION:INTERNAL=2.6.4
+PC_EXPAT_expat_INCLUDEDIR:INTERNAL=
+PC_EXPAT_expat_LIBDIR:INTERNAL=
+PC_EXPAT_expat_PREFIX:INTERNAL=
+PC_EXPAT_expat_VERSION:INTERNAL=
+//ADVANCED property for variable: PKG_CONFIG_ARGN
+PKG_CONFIG_ARGN-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: PKG_CONFIG_EXECUTABLE
+PKG_CONFIG_EXECUTABLE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: PNG_LIBRARY_DEBUG
+PNG_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: PNG_LIBRARY_RELEASE
+PNG_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: PNG_PNG_INCLUDE_DIR
+PNG_PNG_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: ZLIB_INCLUDE_DIR
+ZLIB_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: ZLIB_LIBRARY_DEBUG
+ZLIB_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: ZLIB_LIBRARY_RELEASE
+ZLIB_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//linker supports push/pop state
+_CMAKE_LINKER_PUSHPOP_STATE_SUPPORTED:INTERNAL=TRUE
+//CMAKE_INSTALL_PREFIX during last run
+_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX:INTERNAL=/usr/local
+_OPENSSL_CFLAGS:INTERNAL=-I/usr/include
+_OPENSSL_CFLAGS_I:INTERNAL=
+_OPENSSL_CFLAGS_OTHER:INTERNAL=
+_OPENSSL_FOUND:INTERNAL=1
+_OPENSSL_INCLUDEDIR:INTERNAL=/usr/include
+_OPENSSL_INCLUDE_DIRS:INTERNAL=/usr/include
+_OPENSSL_LDFLAGS:INTERNAL=-L/usr/lib;-lssl;-lcrypto
+_OPENSSL_LDFLAGS_OTHER:INTERNAL=
+_OPENSSL_LIBDIR:INTERNAL=/usr/lib
+_OPENSSL_LIBRARIES:INTERNAL=ssl;crypto
+_OPENSSL_LIBRARY_DIRS:INTERNAL=/usr/lib
+_OPENSSL_LIBS:INTERNAL=
+_OPENSSL_LIBS_L:INTERNAL=
+_OPENSSL_LIBS_OTHER:INTERNAL=
+_OPENSSL_LIBS_PATHS:INTERNAL=
+_OPENSSL_MODULE_NAME:INTERNAL=openssl
+_OPENSSL_PREFIX:INTERNAL=/usr
+_OPENSSL_STATIC_CFLAGS:INTERNAL=-I/usr/include
+_OPENSSL_STATIC_CFLAGS_I:INTERNAL=
+_OPENSSL_STATIC_CFLAGS_OTHER:INTERNAL=
+_OPENSSL_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include
+_OPENSSL_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-lssl;-lcrypto;-ldl;-pthread
+_OPENSSL_STATIC_LDFLAGS_OTHER:INTERNAL=-pthread
+_OPENSSL_STATIC_LIBDIR:INTERNAL=
+_OPENSSL_STATIC_LIBRARIES:INTERNAL=ssl;crypto;dl
+_OPENSSL_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
+_OPENSSL_STATIC_LIBS:INTERNAL=
+_OPENSSL_STATIC_LIBS_L:INTERNAL=
+_OPENSSL_STATIC_LIBS_OTHER:INTERNAL=
+_OPENSSL_STATIC_LIBS_PATHS:INTERNAL=
+_OPENSSL_VERSION:INTERNAL=3.4.0
+_OPENSSL_openssl_INCLUDEDIR:INTERNAL=
+_OPENSSL_openssl_LIBDIR:INTERNAL=
+_OPENSSL_openssl_PREFIX:INTERNAL=
+_OPENSSL_openssl_VERSION:INTERNAL=
+__pkg_config_arguments_PC_DBUS:INTERNAL=QUIET;dbus-1
+__pkg_config_arguments_PC_EXPAT:INTERNAL=QUIET;expat
+__pkg_config_arguments__OPENSSL:INTERNAL=QUIET;openssl
+__pkg_config_checked_PC_DBUS:INTERNAL=1
+__pkg_config_checked_PC_EXPAT:INTERNAL=1
+__pkg_config_checked__OPENSSL:INTERNAL=1
+//ADVANCED property for variable: boost_atomic_DIR
+boost_atomic_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_chrono_DIR
+boost_chrono_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_date_time_DIR
+boost_date_time_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_filesystem_DIR
+boost_filesystem_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_headers_DIR
+boost_headers_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_iostreams_DIR
+boost_iostreams_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_locale_DIR
+boost_locale_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_log_DIR
+boost_log_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_program_options_DIR
+boost_program_options_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_regex_DIR
+boost_regex_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_system_DIR
+boost_system_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_thread_DIR
+boost_thread_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: pkgcfg_lib_PC_DBUS_dbus-1
+pkgcfg_lib_PC_DBUS_dbus-1-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: pkgcfg_lib_PC_EXPAT_expat
+pkgcfg_lib_PC_EXPAT_expat-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: pkgcfg_lib__OPENSSL_crypto
+pkgcfg_lib__OPENSSL_crypto-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: pkgcfg_lib__OPENSSL_ssl
+pkgcfg_lib__OPENSSL_ssl-ADVANCED:INTERNAL=1
+prefix_result:INTERNAL=/usr/lib
+
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
new file mode 100644
index 00000000000..d69cb8dd938
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
@@ -0,0 +1,81 @@
+set(CMAKE_C_COMPILER "/usr/bin/cc")
+set(CMAKE_C_COMPILER_ARG1 "")
+set(CMAKE_C_COMPILER_ID "GNU")
+set(CMAKE_C_COMPILER_VERSION "14.2.1")
+set(CMAKE_C_COMPILER_VERSION_INTERNAL "")
+set(CMAKE_C_COMPILER_WRAPPER "")
+set(CMAKE_C_STANDARD_COMPUTED_DEFAULT "17")
+set(CMAKE_C_EXTENSIONS_COMPUTED_DEFAULT "ON")
+set(CMAKE_C_STANDARD_LATEST "23")
+set(CMAKE_C_COMPILE_FEATURES "c_std_90;c_function_prototypes;c_std_99;c_restrict;c_variadic_macros;c_std_11;c_static_assert;c_std_17;c_std_23")
+set(CMAKE_C90_COMPILE_FEATURES "c_std_90;c_function_prototypes")
+set(CMAKE_C99_COMPILE_FEATURES "c_std_99;c_restrict;c_variadic_macros")
+set(CMAKE_C11_COMPILE_FEATURES "c_std_11;c_static_assert")
+set(CMAKE_C17_COMPILE_FEATURES "c_std_17")
+set(CMAKE_C23_COMPILE_FEATURES "c_std_23")
+
+set(CMAKE_C_PLATFORM_ID "Linux")
+set(CMAKE_C_SIMULATE_ID "")
+set(CMAKE_C_COMPILER_FRONTEND_VARIANT "GNU")
+set(CMAKE_C_SIMULATE_VERSION "")
+
+
+
+
+set(CMAKE_AR "/usr/bin/ar")
+set(CMAKE_C_COMPILER_AR "/usr/bin/gcc-ar")
+set(CMAKE_RANLIB "/usr/bin/ranlib")
+set(CMAKE_C_COMPILER_RANLIB "/usr/bin/gcc-ranlib")
+set(CMAKE_LINKER "/usr/bin/ld")
+set(CMAKE_LINKER_LINK "")
+set(CMAKE_LINKER_LLD "")
+set(CMAKE_C_COMPILER_LINKER "/usr/bin/ld")
+set(CMAKE_C_COMPILER_LINKER_ID "GNU")
+set(CMAKE_C_COMPILER_LINKER_VERSION 2.43.0)
+set(CMAKE_C_COMPILER_LINKER_FRONTEND_VARIANT GNU)
+set(CMAKE_MT "")
+set(CMAKE_TAPI "CMAKE_TAPI-NOTFOUND")
+set(CMAKE_COMPILER_IS_GNUCC 1)
+set(CMAKE_C_COMPILER_LOADED 1)
+set(CMAKE_C_COMPILER_WORKS TRUE)
+set(CMAKE_C_ABI_COMPILED TRUE)
+
+set(CMAKE_C_COMPILER_ENV_VAR "CC")
+
+set(CMAKE_C_COMPILER_ID_RUN 1)
+set(CMAKE_C_SOURCE_FILE_EXTENSIONS c;m)
+set(CMAKE_C_IGNORE_EXTENSIONS h;H;o;O;obj;OBJ;def;DEF;rc;RC)
+set(CMAKE_C_LINKER_PREFERENCE 10)
+set(CMAKE_C_LINKER_DEPFILE_SUPPORTED FALSE)
+
+# Save compiler ABI information.
+set(CMAKE_C_SIZEOF_DATA_PTR "8")
+set(CMAKE_C_COMPILER_ABI "ELF")
+set(CMAKE_C_BYTE_ORDER "LITTLE_ENDIAN")
+set(CMAKE_C_LIBRARY_ARCHITECTURE "")
+
+if(CMAKE_C_SIZEOF_DATA_PTR)
+  set(CMAKE_SIZEOF_VOID_P "${CMAKE_C_SIZEOF_DATA_PTR}")
+endif()
+
+if(CMAKE_C_COMPILER_ABI)
+  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_C_COMPILER_ABI}")
+endif()
+
+if(CMAKE_C_LIBRARY_ARCHITECTURE)
+  set(CMAKE_LIBRARY_ARCHITECTURE "")
+endif()
+
+set(CMAKE_C_CL_SHOWINCLUDES_PREFIX "")
+if(CMAKE_C_CL_SHOWINCLUDES_PREFIX)
+  set(CMAKE_CL_SHOWINCLUDES_PREFIX "${CMAKE_C_CL_SHOWINCLUDES_PREFIX}")
+endif()
+
+
+
+
+
+set(CMAKE_C_IMPLICIT_INCLUDE_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include")
+set(CMAKE_C_IMPLICIT_LINK_LIBRARIES "gcc;gcc_s;c;gcc;gcc_s")
+set(CMAKE_C_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib")
+set(CMAKE_C_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "")
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
new file mode 100644
index 00000000000..7a492576727
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
@@ -0,0 +1,105 @@
+set(CMAKE_CXX_COMPILER "/usr/bin/c++")
+set(CMAKE_CXX_COMPILER_ARG1 "")
+set(CMAKE_CXX_COMPILER_ID "GNU")
+set(CMAKE_CXX_COMPILER_VERSION "14.2.1")
+set(CMAKE_CXX_COMPILER_VERSION_INTERNAL "")
+set(CMAKE_CXX_COMPILER_WRAPPER "")
+set(CMAKE_CXX_STANDARD_COMPUTED_DEFAULT "17")
+set(CMAKE_CXX_EXTENSIONS_COMPUTED_DEFAULT "ON")
+set(CMAKE_CXX_STANDARD_LATEST "26")
+set(CMAKE_CXX_COMPILE_FEATURES "cxx_std_98;cxx_template_template_parameters;cxx_std_11;cxx_alias_templates;cxx_alignas;cxx_alignof;cxx_attributes;cxx_auto_type;cxx_constexpr;cxx_decltype;cxx_decltype_incomplete_return_types;cxx_default_function_template_args;cxx_defaulted_functions;cxx_defaulted_move_initializers;cxx_delegating_constructors;cxx_deleted_functions;cxx_enum_forward_declarations;cxx_explicit_conversions;cxx_extended_friend_declarations;cxx_extern_templates;cxx_final;cxx_func_identifier;cxx_generalized_initializers;cxx_inheriting_constructors;cxx_inline_namespaces;cxx_lambdas;cxx_local_type_template_args;cxx_long_long_type;cxx_noexcept;cxx_nonstatic_member_init;cxx_nullptr;cxx_override;cxx_range_for;cxx_raw_string_literals;cxx_reference_qualified_functions;cxx_right_angle_brackets;cxx_rvalue_references;cxx_sizeof_member;cxx_static_assert;cxx_strong_enums;cxx_thread_local;cxx_trailing_return_types;cxx_unicode_literals;cxx_uniform_initialization;cxx_unrestricted_unions;cxx_user_literals;cxx_variadic_macros;cxx_variadic_templates;cxx_std_14;cxx_aggregate_default_initializers;cxx_attribute_deprecated;cxx_binary_literals;cxx_contextual_conversions;cxx_decltype_auto;cxx_digit_separators;cxx_generic_lambdas;cxx_lambda_init_captures;cxx_relaxed_constexpr;cxx_return_type_deduction;cxx_variable_templates;cxx_std_17;cxx_std_20;cxx_std_23;cxx_std_26")
+set(CMAKE_CXX98_COMPILE_FEATURES "cxx_std_98;cxx_template_template_parameters")
+set(CMAKE_CXX11_COMPILE_FEATURES "cxx_std_11;cxx_alias_templates;cxx_alignas;cxx_alignof;cxx_attributes;cxx_auto_type;cxx_constexpr;cxx_decltype;cxx_decltype_incomplete_return_types;cxx_default_function_template_args;cxx_defaulted_functions;cxx_defaulted_move_initializers;cxx_delegating_constructors;cxx_deleted_functions;cxx_enum_forward_declarations;cxx_explicit_conversions;cxx_extended_friend_declarations;cxx_extern_templates;cxx_final;cxx_func_identifier;cxx_generalized_initializers;cxx_inheriting_constructors;cxx_inline_namespaces;cxx_lambdas;cxx_local_type_template_args;cxx_long_long_type;cxx_noexcept;cxx_nonstatic_member_init;cxx_nullptr;cxx_override;cxx_range_for;cxx_raw_string_literals;cxx_reference_qualified_functions;cxx_right_angle_brackets;cxx_rvalue_references;cxx_sizeof_member;cxx_static_assert;cxx_strong_enums;cxx_thread_local;cxx_trailing_return_types;cxx_unicode_literals;cxx_uniform_initialization;cxx_unrestricted_unions;cxx_user_literals;cxx_variadic_macros;cxx_variadic_templates")
+set(CMAKE_CXX14_COMPILE_FEATURES "cxx_std_14;cxx_aggregate_default_initializers;cxx_attribute_deprecated;cxx_binary_literals;cxx_contextual_conversions;cxx_decltype_auto;cxx_digit_separators;cxx_generic_lambdas;cxx_lambda_init_captures;cxx_relaxed_constexpr;cxx_return_type_deduction;cxx_variable_templates")
+set(CMAKE_CXX17_COMPILE_FEATURES "cxx_std_17")
+set(CMAKE_CXX20_COMPILE_FEATURES "cxx_std_20")
+set(CMAKE_CXX23_COMPILE_FEATURES "cxx_std_23")
+set(CMAKE_CXX26_COMPILE_FEATURES "cxx_std_26")
+
+set(CMAKE_CXX_PLATFORM_ID "Linux")
+set(CMAKE_CXX_SIMULATE_ID "")
+set(CMAKE_CXX_COMPILER_FRONTEND_VARIANT "GNU")
+set(CMAKE_CXX_SIMULATE_VERSION "")
+
+
+
+
+set(CMAKE_AR "/usr/bin/ar")
+set(CMAKE_CXX_COMPILER_AR "/usr/bin/gcc-ar")
+set(CMAKE_RANLIB "/usr/bin/ranlib")
+set(CMAKE_CXX_COMPILER_RANLIB "/usr/bin/gcc-ranlib")
+set(CMAKE_LINKER "/usr/bin/ld")
+set(CMAKE_LINKER_LINK "")
+set(CMAKE_LINKER_LLD "")
+set(CMAKE_CXX_COMPILER_LINKER "/usr/bin/ld")
+set(CMAKE_CXX_COMPILER_LINKER_ID "GNU")
+set(CMAKE_CXX_COMPILER_LINKER_VERSION 2.43.0)
+set(CMAKE_CXX_COMPILER_LINKER_FRONTEND_VARIANT GNU)
+set(CMAKE_MT "")
+set(CMAKE_TAPI "CMAKE_TAPI-NOTFOUND")
+set(CMAKE_COMPILER_IS_GNUCXX 1)
+set(CMAKE_CXX_COMPILER_LOADED 1)
+set(CMAKE_CXX_COMPILER_WORKS TRUE)
+set(CMAKE_CXX_ABI_COMPILED TRUE)
+
+set(CMAKE_CXX_COMPILER_ENV_VAR "CXX")
+
+set(CMAKE_CXX_COMPILER_ID_RUN 1)
+set(CMAKE_CXX_SOURCE_FILE_EXTENSIONS C;M;c++;cc;cpp;cxx;m;mm;mpp;CPP;ixx;cppm;ccm;cxxm;c++m)
+set(CMAKE_CXX_IGNORE_EXTENSIONS inl;h;hpp;HPP;H;o;O;obj;OBJ;def;DEF;rc;RC)
+
+foreach (lang IN ITEMS C OBJC OBJCXX)
+  if (CMAKE_${lang}_COMPILER_ID_RUN)
+    foreach(extension IN LISTS CMAKE_${lang}_SOURCE_FILE_EXTENSIONS)
+      list(REMOVE_ITEM CMAKE_CXX_SOURCE_FILE_EXTENSIONS ${extension})
+    endforeach()
+  endif()
+endforeach()
+
+set(CMAKE_CXX_LINKER_PREFERENCE 30)
+set(CMAKE_CXX_LINKER_PREFERENCE_PROPAGATES 1)
+set(CMAKE_CXX_LINKER_DEPFILE_SUPPORTED FALSE)
+
+# Save compiler ABI information.
+set(CMAKE_CXX_SIZEOF_DATA_PTR "8")
+set(CMAKE_CXX_COMPILER_ABI "ELF")
+set(CMAKE_CXX_BYTE_ORDER "LITTLE_ENDIAN")
+set(CMAKE_CXX_LIBRARY_ARCHITECTURE "")
+
+if(CMAKE_CXX_SIZEOF_DATA_PTR)
+  set(CMAKE_SIZEOF_VOID_P "${CMAKE_CXX_SIZEOF_DATA_PTR}")
+endif()
+
+if(CMAKE_CXX_COMPILER_ABI)
+  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_CXX_COMPILER_ABI}")
+endif()
+
+if(CMAKE_CXX_LIBRARY_ARCHITECTURE)
+  set(CMAKE_LIBRARY_ARCHITECTURE "")
+endif()
+
+set(CMAKE_CXX_CL_SHOWINCLUDES_PREFIX "")
+if(CMAKE_CXX_CL_SHOWINCLUDES_PREFIX)
+  set(CMAKE_CL_SHOWINCLUDES_PREFIX "${CMAKE_CXX_CL_SHOWINCLUDES_PREFIX}")
+endif()
+
+
+
+
+
+set(CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES "/usr/include/c++/14.2.1;/usr/include/c++/14.2.1/x86_64-pc-linux-gnu;/usr/include/c++/14.2.1/backward;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include")
+set(CMAKE_CXX_IMPLICIT_LINK_LIBRARIES "stdc++;m;gcc_s;gcc;c;gcc_s;gcc")
+set(CMAKE_CXX_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib")
+set(CMAKE_CXX_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "")
+set(CMAKE_CXX_COMPILER_CLANG_RESOURCE_DIR "")
+
+set(CMAKE_CXX_COMPILER_IMPORT_STD "")
+### Imported target for C++23 standard library
+set(CMAKE_CXX23_COMPILER_IMPORT_STD_NOT_FOUND_MESSAGE "Toolchain does not support discovering `import std` support")
+
+
+### Imported target for C++26 standard library
+set(CMAKE_CXX26_COMPILER_IMPORT_STD_NOT_FOUND_MESSAGE "Toolchain does not support discovering `import std` support")
+
+
+
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin b/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin
new file mode 100755
index 0000000000000000000000000000000000000000..6f4e7c0e50420bf30feec79c4ad403f23f067405
GIT binary patch
literal 15448
zcmeHOU2Ggz6~4Q68mGkBO&SNc3C*aWsFCo*b{)$NO1t)Y?ODk`A>9a2lupOqu{~nF
zYj($A7ic2_D61&Q2nl$gQY55Gya7T~eQ7rs_2;Rn5K@JBFomMDN=XnD8Hl``GjqQ6
zc(N`PAYMAhnmKd6bH01;ocX&ubNqB>Y$P6wDM*WYM6snMeIzB0&mNZzQYkf{+G%}A
z9aMLb-Rfb!Kjka(`tnA6t8Np#g*5Xzd83Iw<ipg5FBl<f=4~hIJA4nclKo(w=Moz@
z^fS@{H1I}$n)Ddbt-^y2@;En1-RC7A*{YS~rA;(=Y%)(1o+do#E7Bh{^2s^jWkB*7
z)+zF_q`b9KVcwGP!g^TZp}7y1$KG=D|4DzRgtwx3&8V=(@rFi!pC%sX<%0?i^J(dC
zyW?<6@(C@bI#zI|`umO*@?8a|xVY4{G|=DG-=|kfdapMG9#=Old`^u{oKf-fs>T@j
zF%{cl$Hk@)PdIizEu41d|Ng13Tp4}k>1XGU{PsJO?{vn8Uwg62F}xq#CdaTa#tVdf
zSb%*H&76Hr0@H+PO>lD?ytoa158)3qX-AnRWp>)ExK`OU=Pjp5$n=tB&NxM@;5=z7
zc5|Nl)#zAuC~fxYz54OS_CtNj%;v_;yj`|uor-IhbK~hksc7e{se(;y&CZvK(z@w~
zHVssC0n#y|KmWv!k<H`9d9!$*vx|?;Ck6Z2x4%oLU!3lIzTkSsb(Gxe<DGK70<TGf
zZ7JUm9CqzdALnzMj|t?J0M7RW$h812m#pV{BY+3bkF@|Uw?;G-=_mtH2BHi^8Hh3v
zWgyBxlz|Un2L6(`{~yMM8*Rp=9aoPjWqhON#_QLN3%_hz^|HbKo_Dj=*B>{kZyFc=
zaO+eq(^Knt)wq1}Hxy9s_%gBnI-@5Jf8C2G{CRHY@{XUfdU)OKpr#*}rgzoX5{J)o
z;HqefuX^#vzsBn5hEcs`T>aCd#?|!}BleQ<`i8ro8t9S++UjdFiNnL2d>-HVlNoZW
z#fQ!q7f#;In@065x81mO@(3CAj&=GieSNxKufMe85CO4stDECpo!Q(@98M{2@9kNN
zJwt6&zk0){F0Q?txy?hql(}Ji-?-fI_8z4YKW|MYUZ}+~w*}qLyL^*9&$Y%A&xJkj
zHS=`TLoMAtx7s)!jU&KaM-pWq%0QHXC<9Rjq6|bCh%yjmAj&|LfhYq}2L8JY@OQ8G
zlkCLE<cSJ>mn+Sf`31LpwtL`QFn%ICIWl#^T{i7<$<CiGXNSzuiA;8QVo-T;9)D`t
zwarqQzS*4}%jR-p88b66oE@B?2+wa#IcKR3feEpLEuZ3VzdWjyoAo+>Z>!#_*H4jV
z;cuoau_sTf*itffaQDu(75Z?-IP*>s=LiQ3@ASUBG1f;*54G_n#s~K#zZp-r-xV(t
zlYvO03`7}-G7x1T%0QHXC<9Rjq6|bCh%)fu%mC^bQMZViM6Qiw+3l-Fp=7(*D^mY>
zuh^)MJSaAPYTYL`>LmI184LXHZPZI_*QB@+HH!;U)W~&`ENkMw+c(uk(H{}rDY`>6
z)K1wLkcQE3O>ipu^aT8W*8TAi=!I^G-6nkcQtXWvd7_`0p1m&P{kzz~T21NV|Ef?w
zzFnuNM;%S4PiPNPweeA{r;jRcd$iu}-oEaEZYsfT?s~YVd%H#n=e)G4Ki9({d|YB`
zk4kC2=Y9#`witgxa8YVP@bd!Dm-B`+YyUIkjj4N7c)y?UScyj6IU1>W@g3^A)XM^|
z(nhm7>1PSo5ERgFdiVjQQUQ=Qe?iM$+AmG>ah#XGA~UHDsAS5=vF756eergM>k9Z9
zZE$?J{dWo1XbH=00`|raC>&q-cg6hifF!4@>Lfg=KB_uXi1hUzN$sPnU-RCoDCNCl
zA?#xkA0Gcv!a4q4xi5I{UMOBCoW~Q6KS8)g{;=c-e;^E!T_Sv6oUV2mPa`BfZhhWP
zr%Uq-PQfk@4rTRe<rHU1=H^Q%bIO@D?PA`sig&mQj_VfeEna#%rOe^aO$?4_(^Ozi
z*M^xf%#qWB;~CQ!KCR5rvB{yqF>`Wc<grZ7%nc6F3$8os+*2rL|2HM<-e3c7+>~kO
zE!R?9Ax{G_+3*Y8@2GY+^Ocf0XBG2Y37?&$sJv4&7b|w28Y$AsoT^lWE2Z~TJ<l)W
z%=fF6-&&yG*bgqtH)%{R9o5S6ylYL7cFVq=!<JK|8vO;O7fY_K&lVT;g>q@ZF1yPC
zXll`+f3$G&0?|S1a;;hAh0j@)Ii=^9i`0d$-LmibqFt^yrQ#ODBwyJsSWHm5H#pt3
zmt3WL+0)A<FPFMKXU>$ZdE1=J69bmdFs*XgqTw+E+ti#j?@Uu)C2EUS`a*#={KhD$
zN}n#x&)Y@H#s5b5xk;yZ<LzvxJV2oF+(d628<dZe!Oyz5fCIvZP6-Z$=OFBU+6eNO
zgb)1*1d7J}18_FP|AFwKH3W(d^ZEY$H+ptr{Fo0wWB)N92#?<)KF<Zf$9w^LMf&A^
z<lKRe=e|Q24;g&SKcFv?FDT*se}SAlHvk{=0cgylFn+{AKSg|=Yrw{Q1Dc<cEaCC{
zs8W|{gL4W#<~z_e2}J+l{r?{Md7t2K+-K!}i+P<iv*mx17<-16ARo^S=!H<i!ng4s
zhWL06LSx>^eX)ekpC1v%U10x}Mh1)Kt<|@D)mRJMuzx~ZLH>#aK;!%aA>99qA^wkr
z51j*1H1ZGlRodV=j$Aeh^J)AaTR0vz^skAV2=FoA?$ik+L7Z=G+Q5HD4nFqiAM+^u
zU*Z)`4hf%sEa2fdzC##?fRF!ksvYBKr5^NEV+}s^P4Wc!n3r7_KCV+V03P&uh_6x-
zDHjgL8Ro;@pbc&d<Hvj@DSY&Ucu5CL)j|Mc65hbU=lg3=zz^!ixf=*Hq``~g<lj@f
mXu)`p7sfF509{?{^{qv8B+igYbJgbj41Y``*&QN;O!Y4&j*!#<

literal 0
HcmV?d00001

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin b/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin
new file mode 100755
index 0000000000000000000000000000000000000000..66c99e8612cf056b64d38a16057ec51886004a16
GIT binary patch
literal 15464
zcmeHOU2Ggz6~4Q68VBO6Q{pzQLo+I<Y7{*Fsbe{*OxHha&r1FYsUrd*OxL?(d&GKo
znH?9q64b&4VTDvKLQo0%fOzUt0U-(xz(z(bc}pIUBE*BKsBo)5jA$V(k(YC3&bJwl
z*5yy)p_*&WeD{3koO|z_JL9=KbLQ#P*hoAUQz#AU<BBD%#b=VDm^&dAf~4wG&9pzF
z+SFYnH+r0}Px?Swzg&;+#3tbz2-)v2SL)yqpQb+if)O&Z-)=?Y0Z{=eIS%&Q!wQkZ
z_=0o*gud3F#?DkUZ(qYk@dF0^cqkj~zWql3PVAJp^a;X`MfTegzb)|tUX}iUh$qK{
zw?2ty7?Y&qlJxdUh5Z)AFO0)t59B_$JpQ_y`)~R?Eq-g7*Nh4y<{OCqK0$smwZ7xO
z*khW{NPoM{gC_9@N_bUA-k$F5>B#5W^LAljv3;?xx4pMVFBkQ0uV)@tCvALAjZU0Z
z@nuzE4*oF}+abqACKIo)?IGGY?Cf9s-8*f^zj@7Q{@%hffB*UA+=~NNoNf3xxJ|a<
z!W?fXtiuNG-@$Wa^k5ys5#sKy!}B<_Iz0DXkN?;%yfV$%`C`E=yBWtdO=YI1#?74N
zShIH7wVbK(p?tAmO=YI@manU?F==|T(#U+qE>N@C#f&*)7czPKDNB*M?B=q^kMoT6
zvN&I>&1T7yr7q^PK0i8^9vm{e^+$RXs@=NxKQB&mM6*eMTw*G&o+ZTj_2cKhMW<zh
zdS1AN`|W*-Y`)LNRB+wndTTl8^P6&AgRe+~O-Wx59&+U|pXY19ABivjI>5`R>?y7W
zc)7Ga{(689o<|!2-upl4Hy`bz2t*NxA`nF&ia->BC<0Lg-e(c`YvO@-jg=cs#>G8X
zI+QZLQgP$etH#Q&n%2D|WqsG5(yP}#YplLzto&i?^i-;=(sjkS)c;#DsJ5<<*IP4s
z;^;G;J@G%|b}sGt5yQz_ZYwoCBTetCZX}K_v*EfR*{^!`C%(*ZY};7fGA{r5G2`;B
z1|#;0ac$c@L=Bvf2AZlHGl`?acl>#L%l#=*tA$6-8Y}&8>QpsWUw500i~SD~Uv0fk
z)MmC?t-iA72obRh>vzVxK69s@IGR-4-W#)IdzRW*{o)N{bz$Sx)NLN}#ncVsdE-*+
z8wZq1{G_oZ@rz0<bz9g&e8@Lh^KxT6@p4%6c0EmNHPq7W3+uJ{sLcR(9hE2oQ3Rq0
zL=lK05Je!0Koo%}0#O8_2t*NxBJjUOfZu1mS4mHdOr9#!E4AW`nJc-@`OdxzLHmjH
z<jC|XcgeJzqLn-EqzBE>iBx)cVnBIzp8xccYnerdUh|zFOHWOWrOedCaC%^ZEIfT?
z+CEQt2<#ARYj~93{qm^RZdR*(gsWTC>S;nQ{LYk1?5Q&<w%8JD+rPJIjb4Z`&wi)L
z=OH#2-s`<lW3Gp`E^6Zo%nuxB`D%Qq`L4J_o=ij~ia->BC<0Lgq6kD0h$0Y0Ac{Z~
zfhYp+j|d>&5c!439h{ZJgZyMjUJl96io9PC36RYquSs6xeIg_8u}x(B)Vg0}<UjK7
zGcM4-y<IJ`T#=+j<RX?NS&{P}xon931HPzU68xaxVZl~Gz+S05Aq}J7itv=Y=@t0@
zqw0@`NY8Xz<WBLYH^ts~5l8x&>B*Yt-w`>OgDGA7Ujg~!yLE~@)6t=!Q`*CnZG24Y
z>e0LPF0H$>yQj0S^Mu+(b+W5-w?>KQxHPK2RKq5Gp2XAvrD?tf^VA`HQuqgawVD+E
z3E>5lBmA-u^hUi_>h=4yr%lxI&SCrws>IZXR5(uG@%UD?DfzLm{~=Xc)IF*t3C73c
zF{L!(Rfzv7sSncelF}>4y?vFW2YqVC{xy>BR{Pa`a$R}PE{OXhZ3pA`D9jg}-eUWB
zv%+-<{$1uF1h9j~$?a>BckDegA^p9~$LT5(9xfjyp8E|S?=j*z4&meN_4s?$;Urq{
z@loN!?Tiwy?KJhI>@K{s3$KR8GoQ1D&Yc@7&X?@G<qQm_^=zr6%ukPX_1cA*q8WIa
z#ca3F-g!o4PTRAlRmj;HN-HP*NzW^w&)cq>w*n@8o&`O{qBL~6bj*}tj+_}7PnpK>
z8D$QCYGPnKJ*3RhvB|-KF>`Wc<nh#$IW;gy55kmb<uY!Da@{8>ojqq4%!RU*3#GFs
zgDL5f?w%_b&ACh=$9eLU_Rd|0a^h=Vl+$jKg-a%sU(e6pIPu=(e*F}B8bpEnoGzC^
zyjNO&oeciES^7#ZFU`A|X+qcWaSk=RK-vB!r5B2>rOy@?^paC7S&q9Dpr#jW`u@Vs
z2}Lv6?q+6{XFiuH&nZ2(RG=<=bRA#wq~(<DVqu41lFqU68Fo;*7Yp6B7G0%#q0^nB
zHwn5mXU;g8dCQ#3kq0E-!^}8NhK9!;s8e&9c{@ve6{#)S>7_hX{KhDnO3xPO=dFTU
z=gj`kD87%<DPMb9dsuELK-@>sD%%FjM@Zm%UtGvO@dqY_2jIR4xtA(I|3&c!eiVj+
z`2Pkv9rFLK_yaW<3WohZN&MgFUW)N!eE`JqV|@@Fe}?>dZ2*6)AAoDpFCQbv4*pmN
z*u?RW;g9tQ@Fmg(OE~_YCnc{H;E(kI5bG+8A9lbmkw33JAY=VeL+Ly`evIi7RXC>b
z$NC3Y5kvGJKK^f$o{tIo+WkT96Ika-GdsRfV(tang8sPg0862Og>FCI_cTF&+~<H;
zhwj$@i_$-iUuj|~i1n?oH8o_u-*f-)U(<XI5a*xI?)*lJxnI&2^#6gztWv-!U##sB
ze-Kxw!fPA3Y--;X;k&l5J!If-$Tt!2$NGCyzB7a!nRo><@b|>>+@pW2lklA)zDMNq
zj|==Tk8cvk#}9ve&s5<BAC-rFsO{koyh)m%Kh|TL;*aYT4Zsh0E99?|V%g~<#wl!V
z{E)Y)!fj#vSiiK0Kl*_^k2P2th+t04YbyBj|JPuFe-Lr*1?>!J@N1&v-&g#b2;)Iq
j_7R7%2mP;h`_k9ZktjnVtzGN;e}-SKQQ04I2#M;S&VRIx

literal 0
HcmV?d00001

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
new file mode 100644
index 00000000000..b0b76c86f9e
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
@@ -0,0 +1,15 @@
+set(CMAKE_HOST_SYSTEM "Linux-6.10.2-273-tkg-eevdf")
+set(CMAKE_HOST_SYSTEM_NAME "Linux")
+set(CMAKE_HOST_SYSTEM_VERSION "6.10.2-273-tkg-eevdf")
+set(CMAKE_HOST_SYSTEM_PROCESSOR "x86_64")
+
+
+
+set(CMAKE_SYSTEM "Linux-6.10.2-273-tkg-eevdf")
+set(CMAKE_SYSTEM_NAME "Linux")
+set(CMAKE_SYSTEM_VERSION "6.10.2-273-tkg-eevdf")
+set(CMAKE_SYSTEM_PROCESSOR "x86_64")
+
+set(CMAKE_CROSSCOMPILING "FALSE")
+
+set(CMAKE_SYSTEM_LOADED 1)
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
new file mode 100644
index 00000000000..8d8bb038bb3
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
@@ -0,0 +1,904 @@
+#ifdef __cplusplus
+# error "A C++ compiler has been selected for C."
+#endif
+
+#if defined(__18CXX)
+# define ID_VOID_MAIN
+#endif
+#if defined(__CLASSIC_C__)
+/* cv-qualifiers did not exist in K&R C */
+# define const
+# define volatile
+#endif
+
+#if !defined(__has_include)
+/* If the compiler does not have __has_include, pretend the answer is
+   always no.  */
+#  define __has_include(x) 0
+#endif
+
+
+/* Version number components: V=Version, R=Revision, P=Patch
+   Version date components:   YYYY=Year, MM=Month,   DD=Day  */
+
+#if defined(__INTEL_COMPILER) || defined(__ICC)
+# define COMPILER_ID "Intel"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# if defined(__GNUC__)
+#  define SIMULATE_ID "GNU"
+# endif
+  /* __INTEL_COMPILER = VRP prior to 2021, and then VVVV for 2021 and later,
+     except that a few beta releases use the old format with V=2021.  */
+# if __INTEL_COMPILER < 2021 || __INTEL_COMPILER == 202110 || __INTEL_COMPILER == 202111
+#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100)
+#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10)
+#  if defined(__INTEL_COMPILER_UPDATE)
+#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER_UPDATE)
+#  else
+#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER   % 10)
+#  endif
+# else
+#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER)
+#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER_UPDATE)
+   /* The third version component from --version is an update index,
+      but no macro is provided for it.  */
+#  define COMPILER_VERSION_PATCH DEC(0)
+# endif
+# if defined(__INTEL_COMPILER_BUILD_DATE)
+   /* __INTEL_COMPILER_BUILD_DATE = YYYYMMDD */
+#  define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE)
+# endif
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+# if defined(__GNUC__)
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+# elif defined(__GNUG__)
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
+# endif
+# if defined(__GNUC_MINOR__)
+#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+# endif
+# if defined(__GNUC_PATCHLEVEL__)
+#  define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+# endif
+
+#elif (defined(__clang__) && defined(__INTEL_CLANG_COMPILER)) || defined(__INTEL_LLVM_COMPILER)
+# define COMPILER_ID "IntelLLVM"
+#if defined(_MSC_VER)
+# define SIMULATE_ID "MSVC"
+#endif
+#if defined(__GNUC__)
+# define SIMULATE_ID "GNU"
+#endif
+/* __INTEL_LLVM_COMPILER = VVVVRP prior to 2021.2.0, VVVVRRPP for 2021.2.0 and
+ * later.  Look for 6 digit vs. 8 digit version number to decide encoding.
+ * VVVV is no smaller than the current year when a version is released.
+ */
+#if __INTEL_LLVM_COMPILER < 1000000L
+# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/100)
+# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER    % 10)
+#else
+# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/10000)
+# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/100 % 100)
+# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER     % 100)
+#endif
+#if defined(_MSC_VER)
+  /* _MSC_VER = VVRR */
+# define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+# define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+#endif
+#if defined(__GNUC__)
+# define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+#elif defined(__GNUG__)
+# define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
+#endif
+#if defined(__GNUC_MINOR__)
+# define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+#endif
+#if defined(__GNUC_PATCHLEVEL__)
+# define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+#endif
+
+#elif defined(__PATHCC__)
+# define COMPILER_ID "PathScale"
+# define COMPILER_VERSION_MAJOR DEC(__PATHCC__)
+# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__)
+# if defined(__PATHCC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__)
+# endif
+
+#elif defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__)
+# define COMPILER_ID "Embarcadero"
+# define COMPILER_VERSION_MAJOR HEX(__CODEGEARC_VERSION__>>24 & 0x00FF)
+# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF)
+# define COMPILER_VERSION_PATCH DEC(__CODEGEARC_VERSION__     & 0xFFFF)
+
+#elif defined(__BORLANDC__)
+# define COMPILER_ID "Borland"
+  /* __BORLANDC__ = 0xVRR */
+# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8)
+# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF)
+
+#elif defined(__WATCOMC__) && __WATCOMC__ < 1200
+# define COMPILER_ID "Watcom"
+   /* __WATCOMC__ = VVRR */
+# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100)
+# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
+# if (__WATCOMC__ % 10) > 0
+#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
+# endif
+
+#elif defined(__WATCOMC__)
+# define COMPILER_ID "OpenWatcom"
+   /* __WATCOMC__ = VVRP + 1100 */
+# define COMPILER_VERSION_MAJOR DEC((__WATCOMC__ - 1100) / 100)
+# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
+# if (__WATCOMC__ % 10) > 0
+#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
+# endif
+
+#elif defined(__SUNPRO_C)
+# define COMPILER_ID "SunPro"
+# if __SUNPRO_C >= 0x5100
+   /* __SUNPRO_C = 0xVRRP */
+#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>12)
+#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xFF)
+#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_C    & 0xF)
+# else
+   /* __SUNPRO_CC = 0xVRP */
+#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>8)
+#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xF)
+#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_C    & 0xF)
+# endif
+
+#elif defined(__HP_cc)
+# define COMPILER_ID "HP"
+  /* __HP_cc = VVRRPP */
+# define COMPILER_VERSION_MAJOR DEC(__HP_cc/10000)
+# define COMPILER_VERSION_MINOR DEC(__HP_cc/100 % 100)
+# define COMPILER_VERSION_PATCH DEC(__HP_cc     % 100)
+
+#elif defined(__DECC)
+# define COMPILER_ID "Compaq"
+  /* __DECC_VER = VVRRTPPPP */
+# define COMPILER_VERSION_MAJOR DEC(__DECC_VER/10000000)
+# define COMPILER_VERSION_MINOR DEC(__DECC_VER/100000  % 100)
+# define COMPILER_VERSION_PATCH DEC(__DECC_VER         % 10000)
+
+#elif defined(__IBMC__) && defined(__COMPILER_VER__)
+# define COMPILER_ID "zOS"
+  /* __IBMC__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
+
+#elif defined(__open_xl__) && defined(__clang__)
+# define COMPILER_ID "IBMClang"
+# define COMPILER_VERSION_MAJOR DEC(__open_xl_version__)
+# define COMPILER_VERSION_MINOR DEC(__open_xl_release__)
+# define COMPILER_VERSION_PATCH DEC(__open_xl_modification__)
+# define COMPILER_VERSION_TWEAK DEC(__open_xl_ptf_fix_level__)
+
+
+#elif defined(__ibmxl__) && defined(__clang__)
+# define COMPILER_ID "XLClang"
+# define COMPILER_VERSION_MAJOR DEC(__ibmxl_version__)
+# define COMPILER_VERSION_MINOR DEC(__ibmxl_release__)
+# define COMPILER_VERSION_PATCH DEC(__ibmxl_modification__)
+# define COMPILER_VERSION_TWEAK DEC(__ibmxl_ptf_fix_level__)
+
+
+#elif defined(__IBMC__) && !defined(__COMPILER_VER__) && __IBMC__ >= 800
+# define COMPILER_ID "XL"
+  /* __IBMC__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
+
+#elif defined(__IBMC__) && !defined(__COMPILER_VER__) && __IBMC__ < 800
+# define COMPILER_ID "VisualAge"
+  /* __IBMC__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
+
+#elif defined(__NVCOMPILER)
+# define COMPILER_ID "NVHPC"
+# define COMPILER_VERSION_MAJOR DEC(__NVCOMPILER_MAJOR__)
+# define COMPILER_VERSION_MINOR DEC(__NVCOMPILER_MINOR__)
+# if defined(__NVCOMPILER_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__NVCOMPILER_PATCHLEVEL__)
+# endif
+
+#elif defined(__PGI)
+# define COMPILER_ID "PGI"
+# define COMPILER_VERSION_MAJOR DEC(__PGIC__)
+# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__)
+# if defined(__PGIC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__)
+# endif
+
+#elif defined(__clang__) && defined(__cray__)
+# define COMPILER_ID "CrayClang"
+# define COMPILER_VERSION_MAJOR DEC(__cray_major__)
+# define COMPILER_VERSION_MINOR DEC(__cray_minor__)
+# define COMPILER_VERSION_PATCH DEC(__cray_patchlevel__)
+# define COMPILER_VERSION_INTERNAL_STR __clang_version__
+
+
+#elif defined(_CRAYC)
+# define COMPILER_ID "Cray"
+# define COMPILER_VERSION_MAJOR DEC(_RELEASE_MAJOR)
+# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR)
+
+#elif defined(__TI_COMPILER_VERSION__)
+# define COMPILER_ID "TI"
+  /* __TI_COMPILER_VERSION__ = VVVRRRPPP */
+# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000)
+# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000   % 1000)
+# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__        % 1000)
+
+#elif defined(__CLANG_FUJITSU)
+# define COMPILER_ID "FujitsuClang"
+# define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
+# define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
+# define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
+# define COMPILER_VERSION_INTERNAL_STR __clang_version__
+
+
+#elif defined(__FUJITSU)
+# define COMPILER_ID "Fujitsu"
+# if defined(__FCC_version__)
+#   define COMPILER_VERSION __FCC_version__
+# elif defined(__FCC_major__)
+#   define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
+#   define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
+#   define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
+# endif
+# if defined(__fcc_version)
+#   define COMPILER_VERSION_INTERNAL DEC(__fcc_version)
+# elif defined(__FCC_VERSION)
+#   define COMPILER_VERSION_INTERNAL DEC(__FCC_VERSION)
+# endif
+
+
+#elif defined(__ghs__)
+# define COMPILER_ID "GHS"
+/* __GHS_VERSION_NUMBER = VVVVRP */
+# ifdef __GHS_VERSION_NUMBER
+# define COMPILER_VERSION_MAJOR DEC(__GHS_VERSION_NUMBER / 100)
+# define COMPILER_VERSION_MINOR DEC(__GHS_VERSION_NUMBER / 10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__GHS_VERSION_NUMBER      % 10)
+# endif
+
+#elif defined(__TASKING__)
+# define COMPILER_ID "Tasking"
+  # define COMPILER_VERSION_MAJOR DEC(__VERSION__/1000)
+  # define COMPILER_VERSION_MINOR DEC(__VERSION__ % 100)
+# define COMPILER_VERSION_INTERNAL DEC(__VERSION__)
+
+#elif defined(__ORANGEC__)
+# define COMPILER_ID "OrangeC"
+# define COMPILER_VERSION_MAJOR DEC(__ORANGEC_MAJOR__)
+# define COMPILER_VERSION_MINOR DEC(__ORANGEC_MINOR__)
+# define COMPILER_VERSION_PATCH DEC(__ORANGEC_PATCHLEVEL__)
+
+#elif defined(__TINYC__)
+# define COMPILER_ID "TinyCC"
+
+#elif defined(__BCC__)
+# define COMPILER_ID "Bruce"
+
+#elif defined(__SCO_VERSION__)
+# define COMPILER_ID "SCO"
+
+#elif defined(__ARMCC_VERSION) && !defined(__clang__)
+# define COMPILER_ID "ARMCC"
+#if __ARMCC_VERSION >= 1000000
+  /* __ARMCC_VERSION = VRRPPPP */
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/1000000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 100)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION     % 10000)
+#else
+  /* __ARMCC_VERSION = VRPPPP */
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/100000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 10)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION    % 10000)
+#endif
+
+
+#elif defined(__clang__) && defined(__apple_build_version__)
+# define COMPILER_ID "AppleClang"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
+# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
+# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+# define COMPILER_VERSION_TWEAK DEC(__apple_build_version__)
+
+#elif defined(__clang__) && defined(__ARMCOMPILER_VERSION)
+# define COMPILER_ID "ARMClang"
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCOMPILER_VERSION/1000000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCOMPILER_VERSION/10000 % 100)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCOMPILER_VERSION/100   % 100)
+# define COMPILER_VERSION_INTERNAL DEC(__ARMCOMPILER_VERSION)
+
+#elif defined(__clang__) && defined(__ti__)
+# define COMPILER_ID "TIClang"
+  # define COMPILER_VERSION_MAJOR DEC(__ti_major__)
+  # define COMPILER_VERSION_MINOR DEC(__ti_minor__)
+  # define COMPILER_VERSION_PATCH DEC(__ti_patchlevel__)
+# define COMPILER_VERSION_INTERNAL DEC(__ti_version__)
+
+#elif defined(__clang__)
+# define COMPILER_ID "Clang"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
+# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
+# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+
+#elif defined(__LCC__) && (defined(__GNUC__) || defined(__GNUG__) || defined(__MCST__))
+# define COMPILER_ID "LCC"
+# define COMPILER_VERSION_MAJOR DEC(__LCC__ / 100)
+# define COMPILER_VERSION_MINOR DEC(__LCC__ % 100)
+# if defined(__LCC_MINOR__)
+#  define COMPILER_VERSION_PATCH DEC(__LCC_MINOR__)
+# endif
+# if defined(__GNUC__) && defined(__GNUC_MINOR__)
+#  define SIMULATE_ID "GNU"
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+#  if defined(__GNUC_PATCHLEVEL__)
+#   define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+#  endif
+# endif
+
+#elif defined(__GNUC__)
+# define COMPILER_ID "GNU"
+# define COMPILER_VERSION_MAJOR DEC(__GNUC__)
+# if defined(__GNUC_MINOR__)
+#  define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__)
+# endif
+# if defined(__GNUC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+# endif
+
+#elif defined(_MSC_VER)
+# define COMPILER_ID "MSVC"
+  /* _MSC_VER = VVRR */
+# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100)
+# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100)
+# if defined(_MSC_FULL_VER)
+#  if _MSC_VER >= 1400
+    /* _MSC_FULL_VER = VVRRPPPPP */
+#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000)
+#  else
+    /* _MSC_FULL_VER = VVRRPPPP */
+#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000)
+#  endif
+# endif
+# if defined(_MSC_BUILD)
+#  define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD)
+# endif
+
+#elif defined(_ADI_COMPILER)
+# define COMPILER_ID "ADSP"
+#if defined(__VERSIONNUM__)
+  /* __VERSIONNUM__ = 0xVVRRPPTT */
+#  define COMPILER_VERSION_MAJOR DEC(__VERSIONNUM__ >> 24 & 0xFF)
+#  define COMPILER_VERSION_MINOR DEC(__VERSIONNUM__ >> 16 & 0xFF)
+#  define COMPILER_VERSION_PATCH DEC(__VERSIONNUM__ >> 8 & 0xFF)
+#  define COMPILER_VERSION_TWEAK DEC(__VERSIONNUM__ & 0xFF)
+#endif
+
+#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
+# define COMPILER_ID "IAR"
+# if defined(__VER__) && defined(__ICCARM__)
+#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 1000000)
+#  define COMPILER_VERSION_MINOR DEC(((__VER__) / 1000) % 1000)
+#  define COMPILER_VERSION_PATCH DEC((__VER__) % 1000)
+#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
+# elif defined(__VER__) && (defined(__ICCAVR__) || defined(__ICCRX__) || defined(__ICCRH850__) || defined(__ICCRL78__) || defined(__ICC430__) || defined(__ICCRISCV__) || defined(__ICCV850__) || defined(__ICC8051__) || defined(__ICCSTM8__))
+#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 100)
+#  define COMPILER_VERSION_MINOR DEC((__VER__) - (((__VER__) / 100)*100))
+#  define COMPILER_VERSION_PATCH DEC(__SUBVERSION__)
+#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
+# endif
+
+#elif defined(__SDCC_VERSION_MAJOR) || defined(SDCC)
+# define COMPILER_ID "SDCC"
+# if defined(__SDCC_VERSION_MAJOR)
+#  define COMPILER_VERSION_MAJOR DEC(__SDCC_VERSION_MAJOR)
+#  define COMPILER_VERSION_MINOR DEC(__SDCC_VERSION_MINOR)
+#  define COMPILER_VERSION_PATCH DEC(__SDCC_VERSION_PATCH)
+# else
+  /* SDCC = VRP */
+#  define COMPILER_VERSION_MAJOR DEC(SDCC/100)
+#  define COMPILER_VERSION_MINOR DEC(SDCC/10 % 10)
+#  define COMPILER_VERSION_PATCH DEC(SDCC    % 10)
+# endif
+
+
+/* These compilers are either not known or too old to define an
+  identification macro.  Try to identify the platform and guess that
+  it is the native compiler.  */
+#elif defined(__hpux) || defined(__hpua)
+# define COMPILER_ID "HP"
+
+#else /* unknown compiler */
+# define COMPILER_ID ""
+#endif
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
+#ifdef SIMULATE_ID
+char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
+#endif
+
+#ifdef __QNXNTO__
+char const* qnxnto = "INFO" ":" "qnxnto[]";
+#endif
+
+#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
+char const *info_cray = "INFO" ":" "compiler_wrapper[CrayPrgEnv]";
+#endif
+
+#define STRINGIFY_HELPER(X) #X
+#define STRINGIFY(X) STRINGIFY_HELPER(X)
+
+/* Identify known platforms by name.  */
+#if defined(__linux) || defined(__linux__) || defined(linux)
+# define PLATFORM_ID "Linux"
+
+#elif defined(__MSYS__)
+# define PLATFORM_ID "MSYS"
+
+#elif defined(__CYGWIN__)
+# define PLATFORM_ID "Cygwin"
+
+#elif defined(__MINGW32__)
+# define PLATFORM_ID "MinGW"
+
+#elif defined(__APPLE__)
+# define PLATFORM_ID "Darwin"
+
+#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
+# define PLATFORM_ID "Windows"
+
+#elif defined(__FreeBSD__) || defined(__FreeBSD)
+# define PLATFORM_ID "FreeBSD"
+
+#elif defined(__NetBSD__) || defined(__NetBSD)
+# define PLATFORM_ID "NetBSD"
+
+#elif defined(__OpenBSD__) || defined(__OPENBSD)
+# define PLATFORM_ID "OpenBSD"
+
+#elif defined(__sun) || defined(sun)
+# define PLATFORM_ID "SunOS"
+
+#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
+# define PLATFORM_ID "AIX"
+
+#elif defined(__hpux) || defined(__hpux__)
+# define PLATFORM_ID "HP-UX"
+
+#elif defined(__HAIKU__)
+# define PLATFORM_ID "Haiku"
+
+#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
+# define PLATFORM_ID "BeOS"
+
+#elif defined(__QNX__) || defined(__QNXNTO__)
+# define PLATFORM_ID "QNX"
+
+#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
+# define PLATFORM_ID "Tru64"
+
+#elif defined(__riscos) || defined(__riscos__)
+# define PLATFORM_ID "RISCos"
+
+#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
+# define PLATFORM_ID "SINIX"
+
+#elif defined(__UNIX_SV__)
+# define PLATFORM_ID "UNIX_SV"
+
+#elif defined(__bsdos__)
+# define PLATFORM_ID "BSDOS"
+
+#elif defined(_MPRAS) || defined(MPRAS)
+# define PLATFORM_ID "MP-RAS"
+
+#elif defined(__osf) || defined(__osf__)
+# define PLATFORM_ID "OSF1"
+
+#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
+# define PLATFORM_ID "SCO_SV"
+
+#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
+# define PLATFORM_ID "ULTRIX"
+
+#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
+# define PLATFORM_ID "Xenix"
+
+#elif defined(__WATCOMC__)
+# if defined(__LINUX__)
+#  define PLATFORM_ID "Linux"
+
+# elif defined(__DOS__)
+#  define PLATFORM_ID "DOS"
+
+# elif defined(__OS2__)
+#  define PLATFORM_ID "OS2"
+
+# elif defined(__WINDOWS__)
+#  define PLATFORM_ID "Windows3x"
+
+# elif defined(__VXWORKS__)
+#  define PLATFORM_ID "VxWorks"
+
+# else /* unknown platform */
+#  define PLATFORM_ID
+# endif
+
+#elif defined(__INTEGRITY)
+# if defined(INT_178B)
+#  define PLATFORM_ID "Integrity178"
+
+# else /* regular Integrity */
+#  define PLATFORM_ID "Integrity"
+# endif
+
+# elif defined(_ADI_COMPILER)
+#  define PLATFORM_ID "ADSP"
+
+#else /* unknown platform */
+# define PLATFORM_ID
+
+#endif
+
+/* For windows compilers MSVC and Intel we can determine
+   the architecture of the compiler being used.  This is because
+   the compilers do not have flags that can change the architecture,
+   but rather depend on which compiler is being used
+*/
+#if defined(_WIN32) && defined(_MSC_VER)
+# if defined(_M_IA64)
+#  define ARCHITECTURE_ID "IA64"
+
+# elif defined(_M_ARM64EC)
+#  define ARCHITECTURE_ID "ARM64EC"
+
+# elif defined(_M_X64) || defined(_M_AMD64)
+#  define ARCHITECTURE_ID "x64"
+
+# elif defined(_M_IX86)
+#  define ARCHITECTURE_ID "X86"
+
+# elif defined(_M_ARM64)
+#  define ARCHITECTURE_ID "ARM64"
+
+# elif defined(_M_ARM)
+#  if _M_ARM == 4
+#   define ARCHITECTURE_ID "ARMV4I"
+#  elif _M_ARM == 5
+#   define ARCHITECTURE_ID "ARMV5I"
+#  else
+#   define ARCHITECTURE_ID "ARMV" STRINGIFY(_M_ARM)
+#  endif
+
+# elif defined(_M_MIPS)
+#  define ARCHITECTURE_ID "MIPS"
+
+# elif defined(_M_SH)
+#  define ARCHITECTURE_ID "SHx"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__WATCOMC__)
+# if defined(_M_I86)
+#  define ARCHITECTURE_ID "I86"
+
+# elif defined(_M_IX86)
+#  define ARCHITECTURE_ID "X86"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
+# if defined(__ICCARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__ICCRX__)
+#  define ARCHITECTURE_ID "RX"
+
+# elif defined(__ICCRH850__)
+#  define ARCHITECTURE_ID "RH850"
+
+# elif defined(__ICCRL78__)
+#  define ARCHITECTURE_ID "RL78"
+
+# elif defined(__ICCRISCV__)
+#  define ARCHITECTURE_ID "RISCV"
+
+# elif defined(__ICCAVR__)
+#  define ARCHITECTURE_ID "AVR"
+
+# elif defined(__ICC430__)
+#  define ARCHITECTURE_ID "MSP430"
+
+# elif defined(__ICCV850__)
+#  define ARCHITECTURE_ID "V850"
+
+# elif defined(__ICC8051__)
+#  define ARCHITECTURE_ID "8051"
+
+# elif defined(__ICCSTM8__)
+#  define ARCHITECTURE_ID "STM8"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__ghs__)
+# if defined(__PPC64__)
+#  define ARCHITECTURE_ID "PPC64"
+
+# elif defined(__ppc__)
+#  define ARCHITECTURE_ID "PPC"
+
+# elif defined(__ARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__x86_64__)
+#  define ARCHITECTURE_ID "x64"
+
+# elif defined(__i386__)
+#  define ARCHITECTURE_ID "X86"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__clang__) && defined(__ti__)
+# if defined(__ARM_ARCH)
+#  define ARCHITECTURE_ID "Arm"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__TI_COMPILER_VERSION__)
+# if defined(__TI_ARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__MSP430__)
+#  define ARCHITECTURE_ID "MSP430"
+
+# elif defined(__TMS320C28XX__)
+#  define ARCHITECTURE_ID "TMS320C28x"
+
+# elif defined(__TMS320C6X__) || defined(_TMS320C6X)
+#  define ARCHITECTURE_ID "TMS320C6x"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+# elif defined(__ADSPSHARC__)
+#  define ARCHITECTURE_ID "SHARC"
+
+# elif defined(__ADSPBLACKFIN__)
+#  define ARCHITECTURE_ID "Blackfin"
+
+#elif defined(__TASKING__)
+
+# if defined(__CTC__) || defined(__CPTC__)
+#  define ARCHITECTURE_ID "TriCore"
+
+# elif defined(__CMCS__)
+#  define ARCHITECTURE_ID "MCS"
+
+# elif defined(__CARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__CARC__)
+#  define ARCHITECTURE_ID "ARC"
+
+# elif defined(__C51__)
+#  define ARCHITECTURE_ID "8051"
+
+# elif defined(__CPCP__)
+#  define ARCHITECTURE_ID "PCP"
+
+# else
+#  define ARCHITECTURE_ID ""
+# endif
+
+#else
+#  define ARCHITECTURE_ID
+#endif
+
+/* Convert integer to decimal digit literals.  */
+#define DEC(n)                   \
+  ('0' + (((n) / 10000000)%10)), \
+  ('0' + (((n) / 1000000)%10)),  \
+  ('0' + (((n) / 100000)%10)),   \
+  ('0' + (((n) / 10000)%10)),    \
+  ('0' + (((n) / 1000)%10)),     \
+  ('0' + (((n) / 100)%10)),      \
+  ('0' + (((n) / 10)%10)),       \
+  ('0' +  ((n) % 10))
+
+/* Convert integer to hex digit literals.  */
+#define HEX(n)             \
+  ('0' + ((n)>>28 & 0xF)), \
+  ('0' + ((n)>>24 & 0xF)), \
+  ('0' + ((n)>>20 & 0xF)), \
+  ('0' + ((n)>>16 & 0xF)), \
+  ('0' + ((n)>>12 & 0xF)), \
+  ('0' + ((n)>>8  & 0xF)), \
+  ('0' + ((n)>>4  & 0xF)), \
+  ('0' + ((n)     & 0xF))
+
+/* Construct a string literal encoding the version number. */
+#ifdef COMPILER_VERSION
+char const* info_version = "INFO" ":" "compiler_version[" COMPILER_VERSION "]";
+
+/* Construct a string literal encoding the version number components. */
+#elif defined(COMPILER_VERSION_MAJOR)
+char const info_version[] = {
+  'I', 'N', 'F', 'O', ':',
+  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[',
+  COMPILER_VERSION_MAJOR,
+# ifdef COMPILER_VERSION_MINOR
+  '.', COMPILER_VERSION_MINOR,
+#  ifdef COMPILER_VERSION_PATCH
+   '.', COMPILER_VERSION_PATCH,
+#   ifdef COMPILER_VERSION_TWEAK
+    '.', COMPILER_VERSION_TWEAK,
+#   endif
+#  endif
+# endif
+  ']','\0'};
+#endif
+
+/* Construct a string literal encoding the internal version number. */
+#ifdef COMPILER_VERSION_INTERNAL
+char const info_version_internal[] = {
+  'I', 'N', 'F', 'O', ':',
+  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','_',
+  'i','n','t','e','r','n','a','l','[',
+  COMPILER_VERSION_INTERNAL,']','\0'};
+#elif defined(COMPILER_VERSION_INTERNAL_STR)
+char const* info_version_internal = "INFO" ":" "compiler_version_internal[" COMPILER_VERSION_INTERNAL_STR "]";
+#endif
+
+/* Construct a string literal encoding the version number components. */
+#ifdef SIMULATE_VERSION_MAJOR
+char const info_simulate_version[] = {
+  'I', 'N', 'F', 'O', ':',
+  's','i','m','u','l','a','t','e','_','v','e','r','s','i','o','n','[',
+  SIMULATE_VERSION_MAJOR,
+# ifdef SIMULATE_VERSION_MINOR
+  '.', SIMULATE_VERSION_MINOR,
+#  ifdef SIMULATE_VERSION_PATCH
+   '.', SIMULATE_VERSION_PATCH,
+#   ifdef SIMULATE_VERSION_TWEAK
+    '.', SIMULATE_VERSION_TWEAK,
+#   endif
+#  endif
+# endif
+  ']','\0'};
+#endif
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]";
+char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]";
+
+
+
+#define C_STD_99 199901L
+#define C_STD_11 201112L
+#define C_STD_17 201710L
+#define C_STD_23 202311L
+
+#ifdef __STDC_VERSION__
+#  define C_STD __STDC_VERSION__
+#endif
+
+#if !defined(__STDC__) && !defined(__clang__)
+# if defined(_MSC_VER) || defined(__ibmxl__) || defined(__IBMC__)
+#  define C_VERSION "90"
+# else
+#  define C_VERSION
+# endif
+#elif C_STD > C_STD_17
+# define C_VERSION "23"
+#elif C_STD > C_STD_11
+# define C_VERSION "17"
+#elif C_STD > C_STD_99
+# define C_VERSION "11"
+#elif C_STD >= C_STD_99
+# define C_VERSION "99"
+#else
+# define C_VERSION "90"
+#endif
+const char* info_language_standard_default =
+  "INFO" ":" "standard_default[" C_VERSION "]";
+
+const char* info_language_extensions_default = "INFO" ":" "extensions_default["
+#if (defined(__clang__) || defined(__GNUC__) || defined(__xlC__) ||           \
+     defined(__TI_COMPILER_VERSION__)) &&                                     \
+  !defined(__STRICT_ANSI__)
+  "ON"
+#else
+  "OFF"
+#endif
+"]";
+
+/*--------------------------------------------------------------------------*/
+
+#ifdef ID_VOID_MAIN
+void main() {}
+#else
+# if defined(__CLASSIC_C__)
+int main(argc, argv) int argc; char *argv[];
+# else
+int main(int argc, char* argv[])
+# endif
+{
+  int require = 0;
+  require += info_compiler[argc];
+  require += info_platform[argc];
+  require += info_arch[argc];
+#ifdef COMPILER_VERSION_MAJOR
+  require += info_version[argc];
+#endif
+#ifdef COMPILER_VERSION_INTERNAL
+  require += info_version_internal[argc];
+#endif
+#ifdef SIMULATE_ID
+  require += info_simulate[argc];
+#endif
+#ifdef SIMULATE_VERSION_MAJOR
+  require += info_simulate_version[argc];
+#endif
+#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
+  require += info_cray[argc];
+#endif
+  require += info_language_standard_default[argc];
+  require += info_language_extensions_default[argc];
+  (void)argv;
+  return require;
+}
+#endif
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
new file mode 100755
index 0000000000000000000000000000000000000000..37746a787a5774e617e8abfcaacf5381d6be0900
GIT binary patch
literal 15560
zcmeHOYit}>6~4R9!zpoh<JPX56f!g@awR-oJC513q+LJO8B2bY)Dc1^9gV$Xd&PR!
z?2f@HY8w$KF=<eF2#N$K5<-GXAXS2jAE-D=RT>FUf`n962)RHZpg@BP$c4zuIdjjq
z8Bf<O>YoZ}uH`xReD{3k-Z^(3cW2H#njIO6$6^YlLEWoZGm;v~NW%*Ur9vX3(yEEJ
zcc?vT8|hnoOt)vWpjKU8jBk{Uf;W(4UK>~H$U8JledvM_vSi+7Wq}7o1yad=FmEe2
zh#r=|kPaZxUhB_bG8Mz$*5n6;2N~q?P?Dy$Pu{yxwo6=6BEe&od4})|;X$60{vZ)g
zjtT##C7xlKp*AiVf2&lOw<Nr<929#<?t{w%uXwq))8GBV`?=w}QDKSshD3iKBA!gG
zCcecM(|lC=+iV`LNjxD%Rh@<WRBumbA=gpJ7Z;a0meRc)y**~7WOn;K^SDy<&&Sk}
zv12NJQmrrseoVzS=yB1>#4l`nEB$lWnSamYzklRU7rj4r9@_Wm%fET=Q^zVlSYsRB
z5BAA6To~hj6mG*mu>VCer@4;d0AWTQ+};E)Zi3%J_?>n9DBGsUPTLjFDSP(3lP?l7
zz2w+4`Jz+EKjbQI<~aANBO}B819rFBZ62)E5A-N|cw*Gfxn*}YU-8`X#OOewRCFht
zse((sX6H*q@osC=x`s;8jQD^0z>ks6<Hd2axI4dtXXpKb{qT!lrNb{yS3X^EKI1$}
z?$UUhoUg!F#9?Dbw*!Zs4B>{M?b<?kS#TqSe@^iB5dLMsQz88Og0I}C{KDrH9}6fi
z1n@XOl9vLwTq^w57Xx_kxLgh3{&hFtE2>5jh$0Y0Ac{Z~fhYn|1fmGMa}jtg@t%KM
zr>-_yXSSa2RLc77iWje5vQ9nMc)=eOw|D(@c=_^!*7EPHQ-8R2|3tQHrR$<~_V7z&
zP;L1XvHme*CiZ^Dw<r8%_H%aYODqnpc`fAnL2<pKx|-N~k_|72B>Sg*`-4xhxNF^7
zzGj{O+kMvgwFWEpymfiqyOkVth=a!J>P%wq;0->H@8scmYF3K}j#;M;-^5jG`4z9p
zI&*kGDb<!W`YnBBx>~J1zjcs+*zpTD#(QDrMm@1NquAe{XUX;$`B;AVs<phh`m^kH
z9<p_&<+tSNO!lhvq!qiAct$0jU5RC{6aLFh@Mr7c+QHeD^EWG%cxFqo=H<zH*5v(k
zJ^W1e`f-|~+WggKjE5SPC<0Lgq6kD0h$0Y0Ac{Z~fhYn|1fmE;5r`tNF#`PF>&?pW
z*wFah)1~=^e8DYG(p$*m8?86A+n;dDm3*l<net0lkEtuEZdAICE1$7YaJ-pPd46()
z->wSil&9w=rB3e$i#ey9qZfTM&SJrv?D~MTxJ#Z}<X$SZw(&84RIxn`_q5UQc#kGt
ztyX(Tj$W%)M@aI!RxYuJj;h#FGPY;u_QogZ#TVoJuDOlu_p`y^cK?kXW6Xb@@b56*
zcXRTw_(0RP_&H)S5S1tbQ3Rq0L=lK05Je!0Koo%}0#O8_2>gFX0C|kaTSRW)ow8dy
zv3ru&*d+Rj<UignI`Sj;h>o93yG2KyB=UUG{?GMliA`1{$q>1N3zA&O`HEatrTr$Y
zs?#FhC6a#!a%s_`w%snZv^Yk;Y1vUq`t%F<|EcQn5a^q(i{2=FdQ<F=7jdGWo4)QR
z?-J>C*lV}%*cSQYn+*W@sD_~}kZ+3oQsk2&fAq+}z}-eWJrB6cpr85OW|z^O>h4LU
zQ<SP(zv)m{YO~G>=lE?=f3MavsfY9L_L#awh4<^-zJo+9uN?lk?-(5oS0pbL_z+c^
zp#<bK)s29T>KA;xRjCXREgvP3RIMr<!XG2NIo_mjerRi@9vAztpRW^cz$hTUOZ8px
zR)u*&(~lTelu2M{1Ub0R`FN`e=Mn!(@Ni!6YlJ7&Z7P$YN}zm+>dk6r?R${@(zZr&
z7wvB{qXC>p+h`)$PdE<EgtMR9<vQU%Qz7bYg!6ud?e{TG{=<3A{e&C3%MII)5{_$B
zu;G)0H^=F!AlECjJxn;qEn{e;TN*y^<E_fbXaM`A21cEaxdQ|8By2cmPAhxxBV&D|
z!vmCcPA7t$wd|pzeWO|18a%4(BO~MeeIxex(9i?f345Zie<Vx!=;7q|407DxDzDwm
zIi909OFmCtSkX!DZ^(GJbCr@kM-R_98-944taACHy;yN`Dqox_*?97%wSrTeU36w$
z`;AZ4l<gLUgXe$L*;J(>9ZT*$rQh4xu|eAoISfC*dy`!JjUNEiLc(ePHtnycJ<GF2
zt?;8lrOe8SdC!?5>6NvdLoHvVPXiW|SuA<3Ia^#b7s{mtx9pt=KvRo(`o1Hd6R59$
zxWjX1m2W=hROXbKJ5i)AwDiil1>^9|M6s!@>=qm*DAOOa=}}0P=}(whF8R}Ex^wnS
z*_n6kxg0T|X@>2T%MJ~X8K{#xXFfko9hb-#ZOnxNRkSmj3T4vN%)3QTj^4K~_&!aC
ze(h;+o7`U^ai2yHY#S{5Na1^HT)?#OAv1zQ)XpmbdPxTPOTveIABZAxodY}^;(tT<
zkOmAzhWQ^R{9kmh#`v-RfW-c96MlI74&l7^03YiU$R~uy`^d2aAM1=fVLW8;vEG3^
zO>Myvj{nE0k=G*NWBmb%bsNSHJIF_f&ubg#Sl>Y6-W?u4#&nh{98>VIzN$$XF!~Sg
z|JR7iCTOo+ujRUpbtIYiB|LxMBs9o3ga`SpP{5>FyeakV5PwDPQ;=Baf)MWid&0;5
zD?=<rUKABVV5sV8s__uP-|V|M5W@ZcG{nDRXiLZm5Je*XfO&khitvv?#;|_JcXMHT
z=#alAP9ng^`o4{F7rDSrYd3V@FH-~0y_~kSbsfHgJSX$V#~&B)FpqyBj7`AD_f0FE
zY^_wg7PT$-kgrlpkdJlZ72)GNg#+*)c|8>5tBhEtv`mW%0Uq>qsxXG}V?C4>e%M~Z
z0lI1+fH5(z;o$T2HCVt8N*sGZy9IIhV`<z?jXX~n58|?eFpNFOZ$F^5ub?Ao45_ph
RtIz)lzl5W*Geiif>c5;{)EEE&

literal 0
HcmV?d00001

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
new file mode 100644
index 00000000000..da6c824af3a
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
@@ -0,0 +1,919 @@
+/* This source file must have a .cpp extension so that all C++ compilers
+   recognize the extension without flags.  Borland does not know .cxx for
+   example.  */
+#ifndef __cplusplus
+# error "A C compiler has been selected for C++."
+#endif
+
+#if !defined(__has_include)
+/* If the compiler does not have __has_include, pretend the answer is
+   always no.  */
+#  define __has_include(x) 0
+#endif
+
+
+/* Version number components: V=Version, R=Revision, P=Patch
+   Version date components:   YYYY=Year, MM=Month,   DD=Day  */
+
+#if defined(__INTEL_COMPILER) || defined(__ICC)
+# define COMPILER_ID "Intel"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# if defined(__GNUC__)
+#  define SIMULATE_ID "GNU"
+# endif
+  /* __INTEL_COMPILER = VRP prior to 2021, and then VVVV for 2021 and later,
+     except that a few beta releases use the old format with V=2021.  */
+# if __INTEL_COMPILER < 2021 || __INTEL_COMPILER == 202110 || __INTEL_COMPILER == 202111
+#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100)
+#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10)
+#  if defined(__INTEL_COMPILER_UPDATE)
+#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER_UPDATE)
+#  else
+#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER   % 10)
+#  endif
+# else
+#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER)
+#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER_UPDATE)
+   /* The third version component from --version is an update index,
+      but no macro is provided for it.  */
+#  define COMPILER_VERSION_PATCH DEC(0)
+# endif
+# if defined(__INTEL_COMPILER_BUILD_DATE)
+   /* __INTEL_COMPILER_BUILD_DATE = YYYYMMDD */
+#  define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE)
+# endif
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+# if defined(__GNUC__)
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+# elif defined(__GNUG__)
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
+# endif
+# if defined(__GNUC_MINOR__)
+#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+# endif
+# if defined(__GNUC_PATCHLEVEL__)
+#  define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+# endif
+
+#elif (defined(__clang__) && defined(__INTEL_CLANG_COMPILER)) || defined(__INTEL_LLVM_COMPILER)
+# define COMPILER_ID "IntelLLVM"
+#if defined(_MSC_VER)
+# define SIMULATE_ID "MSVC"
+#endif
+#if defined(__GNUC__)
+# define SIMULATE_ID "GNU"
+#endif
+/* __INTEL_LLVM_COMPILER = VVVVRP prior to 2021.2.0, VVVVRRPP for 2021.2.0 and
+ * later.  Look for 6 digit vs. 8 digit version number to decide encoding.
+ * VVVV is no smaller than the current year when a version is released.
+ */
+#if __INTEL_LLVM_COMPILER < 1000000L
+# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/100)
+# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER    % 10)
+#else
+# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/10000)
+# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/100 % 100)
+# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER     % 100)
+#endif
+#if defined(_MSC_VER)
+  /* _MSC_VER = VVRR */
+# define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+# define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+#endif
+#if defined(__GNUC__)
+# define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+#elif defined(__GNUG__)
+# define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
+#endif
+#if defined(__GNUC_MINOR__)
+# define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+#endif
+#if defined(__GNUC_PATCHLEVEL__)
+# define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+#endif
+
+#elif defined(__PATHCC__)
+# define COMPILER_ID "PathScale"
+# define COMPILER_VERSION_MAJOR DEC(__PATHCC__)
+# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__)
+# if defined(__PATHCC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__)
+# endif
+
+#elif defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__)
+# define COMPILER_ID "Embarcadero"
+# define COMPILER_VERSION_MAJOR HEX(__CODEGEARC_VERSION__>>24 & 0x00FF)
+# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF)
+# define COMPILER_VERSION_PATCH DEC(__CODEGEARC_VERSION__     & 0xFFFF)
+
+#elif defined(__BORLANDC__)
+# define COMPILER_ID "Borland"
+  /* __BORLANDC__ = 0xVRR */
+# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8)
+# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF)
+
+#elif defined(__WATCOMC__) && __WATCOMC__ < 1200
+# define COMPILER_ID "Watcom"
+   /* __WATCOMC__ = VVRR */
+# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100)
+# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
+# if (__WATCOMC__ % 10) > 0
+#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
+# endif
+
+#elif defined(__WATCOMC__)
+# define COMPILER_ID "OpenWatcom"
+   /* __WATCOMC__ = VVRP + 1100 */
+# define COMPILER_VERSION_MAJOR DEC((__WATCOMC__ - 1100) / 100)
+# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
+# if (__WATCOMC__ % 10) > 0
+#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
+# endif
+
+#elif defined(__SUNPRO_CC)
+# define COMPILER_ID "SunPro"
+# if __SUNPRO_CC >= 0x5100
+   /* __SUNPRO_CC = 0xVRRP */
+#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>12)
+#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xFF)
+#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC    & 0xF)
+# else
+   /* __SUNPRO_CC = 0xVRP */
+#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>8)
+#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xF)
+#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC    & 0xF)
+# endif
+
+#elif defined(__HP_aCC)
+# define COMPILER_ID "HP"
+  /* __HP_aCC = VVRRPP */
+# define COMPILER_VERSION_MAJOR DEC(__HP_aCC/10000)
+# define COMPILER_VERSION_MINOR DEC(__HP_aCC/100 % 100)
+# define COMPILER_VERSION_PATCH DEC(__HP_aCC     % 100)
+
+#elif defined(__DECCXX)
+# define COMPILER_ID "Compaq"
+  /* __DECCXX_VER = VVRRTPPPP */
+# define COMPILER_VERSION_MAJOR DEC(__DECCXX_VER/10000000)
+# define COMPILER_VERSION_MINOR DEC(__DECCXX_VER/100000  % 100)
+# define COMPILER_VERSION_PATCH DEC(__DECCXX_VER         % 10000)
+
+#elif defined(__IBMCPP__) && defined(__COMPILER_VER__)
+# define COMPILER_ID "zOS"
+  /* __IBMCPP__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
+
+#elif defined(__open_xl__) && defined(__clang__)
+# define COMPILER_ID "IBMClang"
+# define COMPILER_VERSION_MAJOR DEC(__open_xl_version__)
+# define COMPILER_VERSION_MINOR DEC(__open_xl_release__)
+# define COMPILER_VERSION_PATCH DEC(__open_xl_modification__)
+# define COMPILER_VERSION_TWEAK DEC(__open_xl_ptf_fix_level__)
+
+
+#elif defined(__ibmxl__) && defined(__clang__)
+# define COMPILER_ID "XLClang"
+# define COMPILER_VERSION_MAJOR DEC(__ibmxl_version__)
+# define COMPILER_VERSION_MINOR DEC(__ibmxl_release__)
+# define COMPILER_VERSION_PATCH DEC(__ibmxl_modification__)
+# define COMPILER_VERSION_TWEAK DEC(__ibmxl_ptf_fix_level__)
+
+
+#elif defined(__IBMCPP__) && !defined(__COMPILER_VER__) && __IBMCPP__ >= 800
+# define COMPILER_ID "XL"
+  /* __IBMCPP__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
+
+#elif defined(__IBMCPP__) && !defined(__COMPILER_VER__) && __IBMCPP__ < 800
+# define COMPILER_ID "VisualAge"
+  /* __IBMCPP__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
+
+#elif defined(__NVCOMPILER)
+# define COMPILER_ID "NVHPC"
+# define COMPILER_VERSION_MAJOR DEC(__NVCOMPILER_MAJOR__)
+# define COMPILER_VERSION_MINOR DEC(__NVCOMPILER_MINOR__)
+# if defined(__NVCOMPILER_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__NVCOMPILER_PATCHLEVEL__)
+# endif
+
+#elif defined(__PGI)
+# define COMPILER_ID "PGI"
+# define COMPILER_VERSION_MAJOR DEC(__PGIC__)
+# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__)
+# if defined(__PGIC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__)
+# endif
+
+#elif defined(__clang__) && defined(__cray__)
+# define COMPILER_ID "CrayClang"
+# define COMPILER_VERSION_MAJOR DEC(__cray_major__)
+# define COMPILER_VERSION_MINOR DEC(__cray_minor__)
+# define COMPILER_VERSION_PATCH DEC(__cray_patchlevel__)
+# define COMPILER_VERSION_INTERNAL_STR __clang_version__
+
+
+#elif defined(_CRAYC)
+# define COMPILER_ID "Cray"
+# define COMPILER_VERSION_MAJOR DEC(_RELEASE_MAJOR)
+# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR)
+
+#elif defined(__TI_COMPILER_VERSION__)
+# define COMPILER_ID "TI"
+  /* __TI_COMPILER_VERSION__ = VVVRRRPPP */
+# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000)
+# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000   % 1000)
+# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__        % 1000)
+
+#elif defined(__CLANG_FUJITSU)
+# define COMPILER_ID "FujitsuClang"
+# define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
+# define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
+# define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
+# define COMPILER_VERSION_INTERNAL_STR __clang_version__
+
+
+#elif defined(__FUJITSU)
+# define COMPILER_ID "Fujitsu"
+# if defined(__FCC_version__)
+#   define COMPILER_VERSION __FCC_version__
+# elif defined(__FCC_major__)
+#   define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
+#   define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
+#   define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
+# endif
+# if defined(__fcc_version)
+#   define COMPILER_VERSION_INTERNAL DEC(__fcc_version)
+# elif defined(__FCC_VERSION)
+#   define COMPILER_VERSION_INTERNAL DEC(__FCC_VERSION)
+# endif
+
+
+#elif defined(__ghs__)
+# define COMPILER_ID "GHS"
+/* __GHS_VERSION_NUMBER = VVVVRP */
+# ifdef __GHS_VERSION_NUMBER
+# define COMPILER_VERSION_MAJOR DEC(__GHS_VERSION_NUMBER / 100)
+# define COMPILER_VERSION_MINOR DEC(__GHS_VERSION_NUMBER / 10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__GHS_VERSION_NUMBER      % 10)
+# endif
+
+#elif defined(__TASKING__)
+# define COMPILER_ID "Tasking"
+  # define COMPILER_VERSION_MAJOR DEC(__VERSION__/1000)
+  # define COMPILER_VERSION_MINOR DEC(__VERSION__ % 100)
+# define COMPILER_VERSION_INTERNAL DEC(__VERSION__)
+
+#elif defined(__ORANGEC__)
+# define COMPILER_ID "OrangeC"
+# define COMPILER_VERSION_MAJOR DEC(__ORANGEC_MAJOR__)
+# define COMPILER_VERSION_MINOR DEC(__ORANGEC_MINOR__)
+# define COMPILER_VERSION_PATCH DEC(__ORANGEC_PATCHLEVEL__)
+
+#elif defined(__SCO_VERSION__)
+# define COMPILER_ID "SCO"
+
+#elif defined(__ARMCC_VERSION) && !defined(__clang__)
+# define COMPILER_ID "ARMCC"
+#if __ARMCC_VERSION >= 1000000
+  /* __ARMCC_VERSION = VRRPPPP */
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/1000000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 100)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION     % 10000)
+#else
+  /* __ARMCC_VERSION = VRPPPP */
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/100000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 10)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION    % 10000)
+#endif
+
+
+#elif defined(__clang__) && defined(__apple_build_version__)
+# define COMPILER_ID "AppleClang"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
+# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
+# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+# define COMPILER_VERSION_TWEAK DEC(__apple_build_version__)
+
+#elif defined(__clang__) && defined(__ARMCOMPILER_VERSION)
+# define COMPILER_ID "ARMClang"
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCOMPILER_VERSION/1000000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCOMPILER_VERSION/10000 % 100)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCOMPILER_VERSION/100   % 100)
+# define COMPILER_VERSION_INTERNAL DEC(__ARMCOMPILER_VERSION)
+
+#elif defined(__clang__) && defined(__ti__)
+# define COMPILER_ID "TIClang"
+  # define COMPILER_VERSION_MAJOR DEC(__ti_major__)
+  # define COMPILER_VERSION_MINOR DEC(__ti_minor__)
+  # define COMPILER_VERSION_PATCH DEC(__ti_patchlevel__)
+# define COMPILER_VERSION_INTERNAL DEC(__ti_version__)
+
+#elif defined(__clang__)
+# define COMPILER_ID "Clang"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
+# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
+# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+
+#elif defined(__LCC__) && (defined(__GNUC__) || defined(__GNUG__) || defined(__MCST__))
+# define COMPILER_ID "LCC"
+# define COMPILER_VERSION_MAJOR DEC(__LCC__ / 100)
+# define COMPILER_VERSION_MINOR DEC(__LCC__ % 100)
+# if defined(__LCC_MINOR__)
+#  define COMPILER_VERSION_PATCH DEC(__LCC_MINOR__)
+# endif
+# if defined(__GNUC__) && defined(__GNUC_MINOR__)
+#  define SIMULATE_ID "GNU"
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+#  if defined(__GNUC_PATCHLEVEL__)
+#   define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+#  endif
+# endif
+
+#elif defined(__GNUC__) || defined(__GNUG__)
+# define COMPILER_ID "GNU"
+# if defined(__GNUC__)
+#  define COMPILER_VERSION_MAJOR DEC(__GNUC__)
+# else
+#  define COMPILER_VERSION_MAJOR DEC(__GNUG__)
+# endif
+# if defined(__GNUC_MINOR__)
+#  define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__)
+# endif
+# if defined(__GNUC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+# endif
+
+#elif defined(_MSC_VER)
+# define COMPILER_ID "MSVC"
+  /* _MSC_VER = VVRR */
+# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100)
+# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100)
+# if defined(_MSC_FULL_VER)
+#  if _MSC_VER >= 1400
+    /* _MSC_FULL_VER = VVRRPPPPP */
+#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000)
+#  else
+    /* _MSC_FULL_VER = VVRRPPPP */
+#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000)
+#  endif
+# endif
+# if defined(_MSC_BUILD)
+#  define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD)
+# endif
+
+#elif defined(_ADI_COMPILER)
+# define COMPILER_ID "ADSP"
+#if defined(__VERSIONNUM__)
+  /* __VERSIONNUM__ = 0xVVRRPPTT */
+#  define COMPILER_VERSION_MAJOR DEC(__VERSIONNUM__ >> 24 & 0xFF)
+#  define COMPILER_VERSION_MINOR DEC(__VERSIONNUM__ >> 16 & 0xFF)
+#  define COMPILER_VERSION_PATCH DEC(__VERSIONNUM__ >> 8 & 0xFF)
+#  define COMPILER_VERSION_TWEAK DEC(__VERSIONNUM__ & 0xFF)
+#endif
+
+#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
+# define COMPILER_ID "IAR"
+# if defined(__VER__) && defined(__ICCARM__)
+#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 1000000)
+#  define COMPILER_VERSION_MINOR DEC(((__VER__) / 1000) % 1000)
+#  define COMPILER_VERSION_PATCH DEC((__VER__) % 1000)
+#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
+# elif defined(__VER__) && (defined(__ICCAVR__) || defined(__ICCRX__) || defined(__ICCRH850__) || defined(__ICCRL78__) || defined(__ICC430__) || defined(__ICCRISCV__) || defined(__ICCV850__) || defined(__ICC8051__) || defined(__ICCSTM8__))
+#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 100)
+#  define COMPILER_VERSION_MINOR DEC((__VER__) - (((__VER__) / 100)*100))
+#  define COMPILER_VERSION_PATCH DEC(__SUBVERSION__)
+#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
+# endif
+
+
+/* These compilers are either not known or too old to define an
+  identification macro.  Try to identify the platform and guess that
+  it is the native compiler.  */
+#elif defined(__hpux) || defined(__hpua)
+# define COMPILER_ID "HP"
+
+#else /* unknown compiler */
+# define COMPILER_ID ""
+#endif
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
+#ifdef SIMULATE_ID
+char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
+#endif
+
+#ifdef __QNXNTO__
+char const* qnxnto = "INFO" ":" "qnxnto[]";
+#endif
+
+#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
+char const *info_cray = "INFO" ":" "compiler_wrapper[CrayPrgEnv]";
+#endif
+
+#define STRINGIFY_HELPER(X) #X
+#define STRINGIFY(X) STRINGIFY_HELPER(X)
+
+/* Identify known platforms by name.  */
+#if defined(__linux) || defined(__linux__) || defined(linux)
+# define PLATFORM_ID "Linux"
+
+#elif defined(__MSYS__)
+# define PLATFORM_ID "MSYS"
+
+#elif defined(__CYGWIN__)
+# define PLATFORM_ID "Cygwin"
+
+#elif defined(__MINGW32__)
+# define PLATFORM_ID "MinGW"
+
+#elif defined(__APPLE__)
+# define PLATFORM_ID "Darwin"
+
+#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
+# define PLATFORM_ID "Windows"
+
+#elif defined(__FreeBSD__) || defined(__FreeBSD)
+# define PLATFORM_ID "FreeBSD"
+
+#elif defined(__NetBSD__) || defined(__NetBSD)
+# define PLATFORM_ID "NetBSD"
+
+#elif defined(__OpenBSD__) || defined(__OPENBSD)
+# define PLATFORM_ID "OpenBSD"
+
+#elif defined(__sun) || defined(sun)
+# define PLATFORM_ID "SunOS"
+
+#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
+# define PLATFORM_ID "AIX"
+
+#elif defined(__hpux) || defined(__hpux__)
+# define PLATFORM_ID "HP-UX"
+
+#elif defined(__HAIKU__)
+# define PLATFORM_ID "Haiku"
+
+#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
+# define PLATFORM_ID "BeOS"
+
+#elif defined(__QNX__) || defined(__QNXNTO__)
+# define PLATFORM_ID "QNX"
+
+#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
+# define PLATFORM_ID "Tru64"
+
+#elif defined(__riscos) || defined(__riscos__)
+# define PLATFORM_ID "RISCos"
+
+#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
+# define PLATFORM_ID "SINIX"
+
+#elif defined(__UNIX_SV__)
+# define PLATFORM_ID "UNIX_SV"
+
+#elif defined(__bsdos__)
+# define PLATFORM_ID "BSDOS"
+
+#elif defined(_MPRAS) || defined(MPRAS)
+# define PLATFORM_ID "MP-RAS"
+
+#elif defined(__osf) || defined(__osf__)
+# define PLATFORM_ID "OSF1"
+
+#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
+# define PLATFORM_ID "SCO_SV"
+
+#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
+# define PLATFORM_ID "ULTRIX"
+
+#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
+# define PLATFORM_ID "Xenix"
+
+#elif defined(__WATCOMC__)
+# if defined(__LINUX__)
+#  define PLATFORM_ID "Linux"
+
+# elif defined(__DOS__)
+#  define PLATFORM_ID "DOS"
+
+# elif defined(__OS2__)
+#  define PLATFORM_ID "OS2"
+
+# elif defined(__WINDOWS__)
+#  define PLATFORM_ID "Windows3x"
+
+# elif defined(__VXWORKS__)
+#  define PLATFORM_ID "VxWorks"
+
+# else /* unknown platform */
+#  define PLATFORM_ID
+# endif
+
+#elif defined(__INTEGRITY)
+# if defined(INT_178B)
+#  define PLATFORM_ID "Integrity178"
+
+# else /* regular Integrity */
+#  define PLATFORM_ID "Integrity"
+# endif
+
+# elif defined(_ADI_COMPILER)
+#  define PLATFORM_ID "ADSP"
+
+#else /* unknown platform */
+# define PLATFORM_ID
+
+#endif
+
+/* For windows compilers MSVC and Intel we can determine
+   the architecture of the compiler being used.  This is because
+   the compilers do not have flags that can change the architecture,
+   but rather depend on which compiler is being used
+*/
+#if defined(_WIN32) && defined(_MSC_VER)
+# if defined(_M_IA64)
+#  define ARCHITECTURE_ID "IA64"
+
+# elif defined(_M_ARM64EC)
+#  define ARCHITECTURE_ID "ARM64EC"
+
+# elif defined(_M_X64) || defined(_M_AMD64)
+#  define ARCHITECTURE_ID "x64"
+
+# elif defined(_M_IX86)
+#  define ARCHITECTURE_ID "X86"
+
+# elif defined(_M_ARM64)
+#  define ARCHITECTURE_ID "ARM64"
+
+# elif defined(_M_ARM)
+#  if _M_ARM == 4
+#   define ARCHITECTURE_ID "ARMV4I"
+#  elif _M_ARM == 5
+#   define ARCHITECTURE_ID "ARMV5I"
+#  else
+#   define ARCHITECTURE_ID "ARMV" STRINGIFY(_M_ARM)
+#  endif
+
+# elif defined(_M_MIPS)
+#  define ARCHITECTURE_ID "MIPS"
+
+# elif defined(_M_SH)
+#  define ARCHITECTURE_ID "SHx"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__WATCOMC__)
+# if defined(_M_I86)
+#  define ARCHITECTURE_ID "I86"
+
+# elif defined(_M_IX86)
+#  define ARCHITECTURE_ID "X86"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
+# if defined(__ICCARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__ICCRX__)
+#  define ARCHITECTURE_ID "RX"
+
+# elif defined(__ICCRH850__)
+#  define ARCHITECTURE_ID "RH850"
+
+# elif defined(__ICCRL78__)
+#  define ARCHITECTURE_ID "RL78"
+
+# elif defined(__ICCRISCV__)
+#  define ARCHITECTURE_ID "RISCV"
+
+# elif defined(__ICCAVR__)
+#  define ARCHITECTURE_ID "AVR"
+
+# elif defined(__ICC430__)
+#  define ARCHITECTURE_ID "MSP430"
+
+# elif defined(__ICCV850__)
+#  define ARCHITECTURE_ID "V850"
+
+# elif defined(__ICC8051__)
+#  define ARCHITECTURE_ID "8051"
+
+# elif defined(__ICCSTM8__)
+#  define ARCHITECTURE_ID "STM8"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__ghs__)
+# if defined(__PPC64__)
+#  define ARCHITECTURE_ID "PPC64"
+
+# elif defined(__ppc__)
+#  define ARCHITECTURE_ID "PPC"
+
+# elif defined(__ARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__x86_64__)
+#  define ARCHITECTURE_ID "x64"
+
+# elif defined(__i386__)
+#  define ARCHITECTURE_ID "X86"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__clang__) && defined(__ti__)
+# if defined(__ARM_ARCH)
+#  define ARCHITECTURE_ID "Arm"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__TI_COMPILER_VERSION__)
+# if defined(__TI_ARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__MSP430__)
+#  define ARCHITECTURE_ID "MSP430"
+
+# elif defined(__TMS320C28XX__)
+#  define ARCHITECTURE_ID "TMS320C28x"
+
+# elif defined(__TMS320C6X__) || defined(_TMS320C6X)
+#  define ARCHITECTURE_ID "TMS320C6x"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+# elif defined(__ADSPSHARC__)
+#  define ARCHITECTURE_ID "SHARC"
+
+# elif defined(__ADSPBLACKFIN__)
+#  define ARCHITECTURE_ID "Blackfin"
+
+#elif defined(__TASKING__)
+
+# if defined(__CTC__) || defined(__CPTC__)
+#  define ARCHITECTURE_ID "TriCore"
+
+# elif defined(__CMCS__)
+#  define ARCHITECTURE_ID "MCS"
+
+# elif defined(__CARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__CARC__)
+#  define ARCHITECTURE_ID "ARC"
+
+# elif defined(__C51__)
+#  define ARCHITECTURE_ID "8051"
+
+# elif defined(__CPCP__)
+#  define ARCHITECTURE_ID "PCP"
+
+# else
+#  define ARCHITECTURE_ID ""
+# endif
+
+#else
+#  define ARCHITECTURE_ID
+#endif
+
+/* Convert integer to decimal digit literals.  */
+#define DEC(n)                   \
+  ('0' + (((n) / 10000000)%10)), \
+  ('0' + (((n) / 1000000)%10)),  \
+  ('0' + (((n) / 100000)%10)),   \
+  ('0' + (((n) / 10000)%10)),    \
+  ('0' + (((n) / 1000)%10)),     \
+  ('0' + (((n) / 100)%10)),      \
+  ('0' + (((n) / 10)%10)),       \
+  ('0' +  ((n) % 10))
+
+/* Convert integer to hex digit literals.  */
+#define HEX(n)             \
+  ('0' + ((n)>>28 & 0xF)), \
+  ('0' + ((n)>>24 & 0xF)), \
+  ('0' + ((n)>>20 & 0xF)), \
+  ('0' + ((n)>>16 & 0xF)), \
+  ('0' + ((n)>>12 & 0xF)), \
+  ('0' + ((n)>>8  & 0xF)), \
+  ('0' + ((n)>>4  & 0xF)), \
+  ('0' + ((n)     & 0xF))
+
+/* Construct a string literal encoding the version number. */
+#ifdef COMPILER_VERSION
+char const* info_version = "INFO" ":" "compiler_version[" COMPILER_VERSION "]";
+
+/* Construct a string literal encoding the version number components. */
+#elif defined(COMPILER_VERSION_MAJOR)
+char const info_version[] = {
+  'I', 'N', 'F', 'O', ':',
+  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[',
+  COMPILER_VERSION_MAJOR,
+# ifdef COMPILER_VERSION_MINOR
+  '.', COMPILER_VERSION_MINOR,
+#  ifdef COMPILER_VERSION_PATCH
+   '.', COMPILER_VERSION_PATCH,
+#   ifdef COMPILER_VERSION_TWEAK
+    '.', COMPILER_VERSION_TWEAK,
+#   endif
+#  endif
+# endif
+  ']','\0'};
+#endif
+
+/* Construct a string literal encoding the internal version number. */
+#ifdef COMPILER_VERSION_INTERNAL
+char const info_version_internal[] = {
+  'I', 'N', 'F', 'O', ':',
+  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','_',
+  'i','n','t','e','r','n','a','l','[',
+  COMPILER_VERSION_INTERNAL,']','\0'};
+#elif defined(COMPILER_VERSION_INTERNAL_STR)
+char const* info_version_internal = "INFO" ":" "compiler_version_internal[" COMPILER_VERSION_INTERNAL_STR "]";
+#endif
+
+/* Construct a string literal encoding the version number components. */
+#ifdef SIMULATE_VERSION_MAJOR
+char const info_simulate_version[] = {
+  'I', 'N', 'F', 'O', ':',
+  's','i','m','u','l','a','t','e','_','v','e','r','s','i','o','n','[',
+  SIMULATE_VERSION_MAJOR,
+# ifdef SIMULATE_VERSION_MINOR
+  '.', SIMULATE_VERSION_MINOR,
+#  ifdef SIMULATE_VERSION_PATCH
+   '.', SIMULATE_VERSION_PATCH,
+#   ifdef SIMULATE_VERSION_TWEAK
+    '.', SIMULATE_VERSION_TWEAK,
+#   endif
+#  endif
+# endif
+  ']','\0'};
+#endif
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]";
+char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]";
+
+
+
+#define CXX_STD_98 199711L
+#define CXX_STD_11 201103L
+#define CXX_STD_14 201402L
+#define CXX_STD_17 201703L
+#define CXX_STD_20 202002L
+#define CXX_STD_23 202302L
+
+#if defined(__INTEL_COMPILER) && defined(_MSVC_LANG)
+#  if _MSVC_LANG > CXX_STD_17
+#    define CXX_STD _MSVC_LANG
+#  elif _MSVC_LANG == CXX_STD_17 && defined(__cpp_aggregate_paren_init)
+#    define CXX_STD CXX_STD_20
+#  elif _MSVC_LANG > CXX_STD_14 && __cplusplus > CXX_STD_17
+#    define CXX_STD CXX_STD_20
+#  elif _MSVC_LANG > CXX_STD_14
+#    define CXX_STD CXX_STD_17
+#  elif defined(__INTEL_CXX11_MODE__) && defined(__cpp_aggregate_nsdmi)
+#    define CXX_STD CXX_STD_14
+#  elif defined(__INTEL_CXX11_MODE__)
+#    define CXX_STD CXX_STD_11
+#  else
+#    define CXX_STD CXX_STD_98
+#  endif
+#elif defined(_MSC_VER) && defined(_MSVC_LANG)
+#  if _MSVC_LANG > __cplusplus
+#    define CXX_STD _MSVC_LANG
+#  else
+#    define CXX_STD __cplusplus
+#  endif
+#elif defined(__NVCOMPILER)
+#  if __cplusplus == CXX_STD_17 && defined(__cpp_aggregate_paren_init)
+#    define CXX_STD CXX_STD_20
+#  else
+#    define CXX_STD __cplusplus
+#  endif
+#elif defined(__INTEL_COMPILER) || defined(__PGI)
+#  if __cplusplus == CXX_STD_11 && defined(__cpp_namespace_attributes)
+#    define CXX_STD CXX_STD_17
+#  elif __cplusplus == CXX_STD_11 && defined(__cpp_aggregate_nsdmi)
+#    define CXX_STD CXX_STD_14
+#  else
+#    define CXX_STD __cplusplus
+#  endif
+#elif (defined(__IBMCPP__) || defined(__ibmxl__)) && defined(__linux__)
+#  if __cplusplus == CXX_STD_11 && defined(__cpp_aggregate_nsdmi)
+#    define CXX_STD CXX_STD_14
+#  else
+#    define CXX_STD __cplusplus
+#  endif
+#elif __cplusplus == 1 && defined(__GXX_EXPERIMENTAL_CXX0X__)
+#  define CXX_STD CXX_STD_11
+#else
+#  define CXX_STD __cplusplus
+#endif
+
+const char* info_language_standard_default = "INFO" ":" "standard_default["
+#if CXX_STD > CXX_STD_23
+  "26"
+#elif CXX_STD > CXX_STD_20
+  "23"
+#elif CXX_STD > CXX_STD_17
+  "20"
+#elif CXX_STD > CXX_STD_14
+  "17"
+#elif CXX_STD > CXX_STD_11
+  "14"
+#elif CXX_STD >= CXX_STD_11
+  "11"
+#else
+  "98"
+#endif
+"]";
+
+const char* info_language_extensions_default = "INFO" ":" "extensions_default["
+#if (defined(__clang__) || defined(__GNUC__) || defined(__xlC__) ||           \
+     defined(__TI_COMPILER_VERSION__)) &&                                     \
+  !defined(__STRICT_ANSI__)
+  "ON"
+#else
+  "OFF"
+#endif
+"]";
+
+/*--------------------------------------------------------------------------*/
+
+int main(int argc, char* argv[])
+{
+  int require = 0;
+  require += info_compiler[argc];
+  require += info_platform[argc];
+  require += info_arch[argc];
+#ifdef COMPILER_VERSION_MAJOR
+  require += info_version[argc];
+#endif
+#ifdef COMPILER_VERSION_INTERNAL
+  require += info_version_internal[argc];
+#endif
+#ifdef SIMULATE_ID
+  require += info_simulate[argc];
+#endif
+#ifdef SIMULATE_VERSION_MAJOR
+  require += info_simulate_version[argc];
+#endif
+#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
+  require += info_cray[argc];
+#endif
+  require += info_language_standard_default[argc];
+  require += info_language_extensions_default[argc];
+  (void)argv;
+  return require;
+}
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
new file mode 100755
index 0000000000000000000000000000000000000000..78617c271080d9e2231a72abde01b7fc302df0f2
GIT binary patch
literal 15576
zcmeHOU2Ggz6~4Pp8VBO66YAo|6&V#&xfD-!9mi|~rt8>ik0t+<)Dfm3Ovbxod&T}S
zI~zHbfFJ|KSgHCWK^`a|p+10AK_ygpp*RW@f?AY5AVqyZE~1jD($*C}N=fA9oO{n%
z&tBFAfj~UWwRX;&@0{=4JLk^qT+f{SLVA288i@#QE#hMWHKSc2DKcC=LOUQ*A}QKn
zdxz)}w}8GwV#=OU0<5ZCjW)_w!dpNhuM>Bg$U77aeW=DGM2WoZ+65dCG?s#n19>~q
zK)Nnpqz+iJz22XJWN3!m*5yZu$1=#np{(^N|FwZeIYW6lO_F)2B5#9u8^mLIh5BR3
z`NW*yCrSC#WeRNAQgSPV&RZm&E{DmVCH8^sfmi+Pzti9S#CySzVT3MuzFBgA9|s;y
zts?%DEl=}t>TkPwFev{lDZS!QJ~!LncPO9j$>)mI#h%4ve@}m(St*&lvS%Du96oqX
zjZU5r(Q{%IG3G}^q(P684lc5x@2&8`v?ITo{Nh`0EI$0;<EPL3@J07)HwJ$F*z4$n
z$AK}?2ODDe;f6N;F!ry=8F0F@iQ@=h`<vi64x<T<eK*5Dv<)t7d%jRA+7;jNeA^cG
z*z|;*bv<`JSMgnMdSWPFD!S9oY~EG2<`x^KCqqFBPOb=HGmDNrmn%B?+(WJabH&eQ
z?zsnNtRK}veQ!PkOw<yHXB0j<K6Y%#?llkh3Eu5B<#%2b<_KmJ{;)+vR6GKb&#xan
z_H{TdTf_yzst0nr1^9dyouTn{&(~Y~K83H-b<OxH1#C?zJL9akYq()3zfKMJ2sbqR
zVZysL{0YM28vZoltM>`n;2<djO8->=r%Om0t^{!UN|E^003JMl*8;fwepcbbZJ2>D
z17QZj41^g7GZ1DV%)oys1AmIW?{C)9wN`6o=jB5}SYKZCqqQs6($8Bj$sW<3czta7
zrB7SSzqgkDuyOx%I<cC#Y@Hu?860XIOThZ`oEba#CFu|ND;Vee&X-Z#d)@DV&~p@e
zcWo_p@Ekf`A_@M_NdF_>M{)P2wY*_neB(ar;`J6Q^1SuZrhh90I6?thYio0{gTq^V
z9N)Qt0+>bh@Cj>a;58F=t>st!Hfv?zF2HLYR{>hj)M~ZocMby(Idy4kyqD&-_G1TA
z0^|L09(+$gjOEW=vzDuCzf9l6AzLdQzk^6C>1);nD{>|FtcX3g8cE*-{5RX+&o#qU
zfb$&}_X-hvc1L?X%7td$5dEvo@Rjt<Q!qvK`K!+u4mE6H2Eq)483;2FW+2Q!n1L_@
zVFtnsgc%4k5N4n;1Nc7co!Z#s$kfqHsZh@4UGF5kg*?^h-C(!RxLze!DxQqXmgqCp
zPP~_Q5~qY@l=F^1SMmxc$MNkdfsU71I7$2Pez2HzyezyMoO7yq|77CBWN{aLw}`z|
z>b9v#IjTrk%SSq4cz8t9Z`NvkASX6zwQ-R6t`%G4q2nU5*dFQHv#a${c%_FpzH9CT
z|GUs(c$a(=hZyqT2K*_+2luvrB|6l0OY}RyL?CQo2Eq)483;2FW+2Q!n1L_@VFtns
zgc<n%$^h3Ja($tyViaPYhROOFO+TmUkC48HBo{!ok-kcGjklA|b&p-7^S?|7Nay-T
zuJdL4Up8wcbXle1L9PibQ_&#SA!1u2`@57Xen9fwB=P@1Y#mC}x4UTXGzI2<lavT3
z-jt2`H)?7;07}<Q(&NO3H^p+ioJaU~Q|boU-zJ^=q4586!S&<Yb<B09hM_#Tj+E<0
zxlWYpLPv*&jvC$YJm78v{>|?-6Gm^mw=bTI9}(M_?oGtE>l|>*-wyFsO?Sb0h={!+
zWhhH;z@eG{2c<n$uPbMFEVqq__Xs@?BNFcr>r{uz{-1)Kc5$0XrWjEY>--JCg@$Lq
zybs0+M%lQ=)dTHL1vPBXgSKDn5x3KI^AuSh2e~hLo8b9i(zg+Ze)W3arwKPw%9GEt
zAA`C-+9vqAR8}E=ia09)iNzckKb}$`$GJgxyN0JA4>*2<>XzlR6Y$-QcoeQe!c{aV
zbO0QWOV4K);?Qrm7XK*Vn14ObqY{6wNRdCsA17RoKLfbIP66p}gD-7^i=heUGw#sL
z%n&^b8_SxRa#`39jwgC^#kmqc`+`bzxGL<lWse*moJiZ&@Nr=ee{yngVr)p*qvKP@
z2FLBGk&y?|)Asb>vGFw2z`I$;cc9#T3M$&OxuRXIxLK{DJr%4<r;7J%rDQL_V=^d}
zmm}bZYD&YWX#y+aa}Y`^m#;^Ia(7A1JH`2`Gw<5}_;gJ<@FPHBLqH!QLZ!Z)o*ae}
z{>A|MgFA4=qf@o|aHvH*ve`<7fp@C^Z}L-trauP|X60<bcV<EQo{|f^mn*{03d+JP
zmVDQoFILU6S1P-ne>MQkR&($}k6f0Z!DC}RzB4bR`+`$h5N7sl5xP*)_mqVmb~Y$B
z*gQAyAVHWiRi+O)6{egB(<{lTHr)k#&T|T`y^sY4Yl>kzp69^ukiq*9&MD+F&{qj!
z!Nx4-VMhgnYzh-5sNfd;z$yM8?c#kKE`|Ej;ZC~WvgG?VcY?mb_I^<CUK=GaNqm+m
z!ddY54eR}|6XY)vpXCSGktBcLGCZd7ze#+S20N0}`JVv%uW;|?@$-6wB_BVpNA&SK
zz{j-+^Lf3(@=@v+j}ddnd|r3t0K*|OpVvPudA$QJvg!H%ETFhHVLq=%Sn@iK$IpH&
zKM#Cd>#)x2ow`)r$~g*-pJ0LaH_R#XdA-Gw*IV4be*E76F2-eh{eD9C6<$|@i){M*
zJqc)#&-W>o-_jDM-LB;CcY=JrkFw--FLmGWn=Hh>NB#5h3j<MThTMwFO4PRm*Y#&$
z5Bq2S3*^9(&p#&U$Nw{pzfOFX(@Z4E`DYl%2df!*4kE_udHx-p?$0{Q-vTEV;PZNa
zy$7Rho$pH9(wYAX7;x_CvaPS%_;-=~`$t~SGmq!-HQ-|Yn9sjsT0I0Hv~DHpTjsNT
z6D&bKuMgLW&(|pjU>?is8egQyGp=NkR2Ix*eG_&N<MH#lCP{qVAIBPOEdU@!?sXIM
z@%uH{m>-mU?gjnI6!0fxJOD<V10E0OWjA0v_8`Ceu+pC7j>xE~uqJHI{{_C3gSJN_
HXsY--f}ZvE

literal 0
HcmV?d00001

diff --git a/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml b/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
new file mode 100644
index 00000000000..731c5465937
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
@@ -0,0 +1,562 @@
+
+---
+events:
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineSystem.cmake:205 (message)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      The system is: Linux - 6.10.2-273-tkg-eevdf - x86_64
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:17 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:64 (__determine_compiler_id_test)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCCompiler.cmake:123 (CMAKE_DETERMINE_COMPILER_ID)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Compiling the C compiler identification source file "CMakeCCompilerId.c" succeeded.
+      Compiler: /usr/bin/cc 
+      Build flags: 
+      Id flags:  
+      
+      The output was:
+      0
+      
+      
+      Compilation of the C compiler identification source "CMakeCCompilerId.c" produced "a.out"
+      
+      The C compiler identification is GNU, found in:
+        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:17 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:64 (__determine_compiler_id_test)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCXXCompiler.cmake:126 (CMAKE_DETERMINE_COMPILER_ID)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" succeeded.
+      Compiler: /usr/bin/c++ 
+      Build flags: 
+      Id flags:  
+      
+      The output was:
+      0
+      
+      
+      Compilation of the CXX compiler identification source "CMakeCXXCompilerId.cpp" produced "a.out"
+      
+      The CXX compiler identification is GNU, found in:
+        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
+      
+  -
+    kind: "try_compile-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:74 (try_compile)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    checks:
+      - "Detecting C compiler ABI info"
+    directories:
+      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-OLEfcT"
+      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-OLEfcT"
+    cmakeVariables:
+      CMAKE_C_FLAGS: ""
+      CMAKE_C_FLAGS_DEBUG: "-g"
+      CMAKE_EXE_LINKER_FLAGS: ""
+    buildResult:
+      variable: "CMAKE_C_ABI_COMPILED"
+      cached: true
+      stdout: |
+        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-OLEfcT'
+        
+        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_834ca
+        [1/2] /usr/bin/cc   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c
+        Using built-in specs.
+        COLLECT_GCC=/usr/bin/cc
+        Target: x86_64-pc-linux-gnu
+        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
+        Thread model: posix
+        Supported LTO compression algorithms: zlib zstd
+        gcc version 14.2.1 20240910 (GCC) 
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/'
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1 -quiet -v /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c -quiet -dumpdir CMakeFiles/cmTC_834ca.dir/ -dumpbase CMakeCCompilerABI.c.c -dumpbase-ext .c -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/ccfiH50L.s
+        GNU C17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)
+        	compiled by GNU C version 14.2.1 20240910, GMP version 6.3.0, MPFR version 4.2.1, MPC version 1.3.1, isl version isl-0.27-GMP
+        
+        GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
+        ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"
+        #include "..." search starts here:
+        #include <...> search starts here:
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include
+         /usr/local/include
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed
+         /usr/include
+        End of search list.
+        Compiler executable checksum: 91e980a230f7d2e39f93577991713edd
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/'
+         as -v --64 -o CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o /tmp/ccfiH50L.s
+        GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0
+        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
+        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.'
+        [2/2] : && /usr/bin/cc  -v -Wl,-v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -o cmTC_834ca   && :
+        Using built-in specs.
+        COLLECT_GCC=/usr/bin/cc
+        COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper
+        Target: x86_64-pc-linux-gnu
+        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
+        Thread model: posix
+        Supported LTO compression algorithms: zlib zstd
+        gcc version 14.2.1 20240910 (GCC) 
+        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
+        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
+        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_834ca' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_834ca.'
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cc3hcm2q.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_834ca /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
+        collect2 version 14.2.1 20240910
+        /usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cc3hcm2q.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_834ca /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
+        GNU ld (GNU Binutils) 2.43.0
+        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_834ca' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_834ca.'
+        
+      exitCode: 0
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:182 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Parsed C implicit include dir info: rv=done
+        found start of include info
+        found start of implicit include info
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+          add: [/usr/local/include]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+          add: [/usr/include]
+        end of search list found
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+        collapse include dir [/usr/local/include] ==> [/usr/local/include]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+        collapse include dir [/usr/include] ==> [/usr/include]
+        implicit include dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include]
+      
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:218 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Parsed C implicit link information:
+        link line regex: [^( *|.*[/\\])(ld[0-9]*(\\.[a-z]+)?|CMAKE_LINK_STARTFILE-NOTFOUND|([^/\\]+-)?ld|collect2)[^/\\]*( |$)]
+        linker tool regex: [^[ 	]*(->|")?[ 	]*(([^"]*[/\\])?(ld[0-9]*(\\.[a-z]+)?))("|,| |$)]
+        ignore line: [Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-OLEfcT']
+        ignore line: []
+        ignore line: [Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_834ca]
+        ignore line: [[1/2] /usr/bin/cc   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c]
+        ignore line: [Using built-in specs.]
+        ignore line: [COLLECT_GCC=/usr/bin/cc]
+        ignore line: [Target: x86_64-pc-linux-gnu]
+        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
+        ignore line: [Thread model: posix]
+        ignore line: [Supported LTO compression algorithms: zlib zstd]
+        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/']
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1 -quiet -v /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c -quiet -dumpdir CMakeFiles/cmTC_834ca.dir/ -dumpbase CMakeCCompilerABI.c.c -dumpbase-ext .c -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/ccfiH50L.s]
+        ignore line: [GNU C17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)]
+        ignore line: [	compiled by GNU C version 14.2.1 20240910  GMP version 6.3.0  MPFR version 4.2.1  MPC version 1.3.1  isl version isl-0.27-GMP]
+        ignore line: []
+        ignore line: [GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072]
+        ignore line: [ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"]
+        ignore line: [#include "..." search starts here:]
+        ignore line: [#include <...> search starts here:]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+        ignore line: [ /usr/local/include]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+        ignore line: [ /usr/include]
+        ignore line: [End of search list.]
+        ignore line: [Compiler executable checksum: 91e980a230f7d2e39f93577991713edd]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/']
+        ignore line: [ as -v --64 -o CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o /tmp/ccfiH50L.s]
+        ignore line: [GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0]
+        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
+        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.']
+        ignore line: [[2/2] : && /usr/bin/cc  -v -Wl -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -o cmTC_834ca   && :]
+        ignore line: [Using built-in specs.]
+        ignore line: [COLLECT_GCC=/usr/bin/cc]
+        ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper]
+        ignore line: [Target: x86_64-pc-linux-gnu]
+        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
+        ignore line: [Thread model: posix]
+        ignore line: [Supported LTO compression algorithms: zlib zstd]
+        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
+        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
+        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
+        ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_834ca' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_834ca.']
+        link line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cc3hcm2q.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_834ca /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2] ==> ignore
+          arg [-plugin] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so] ==> ignore
+          arg [-plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper] ==> ignore
+          arg [-plugin-opt=-fresolution=/tmp/cc3hcm2q.res] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
+          arg [-plugin-opt=-pass-through=-lc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
+          arg [--build-id] ==> ignore
+          arg [--eh-frame-hdr] ==> ignore
+          arg [--hash-style=gnu] ==> ignore
+          arg [-m] ==> ignore
+          arg [elf_x86_64] ==> ignore
+          arg [-dynamic-linker] ==> ignore
+          arg [/lib64/ld-linux-x86-64.so.2] ==> ignore
+          arg [-pie] ==> ignore
+          arg [-o] ==> ignore
+          arg [cmTC_834ca] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib]
+          arg [-L/lib/../lib] ==> dir [/lib/../lib]
+          arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..]
+          arg [-v] ==> ignore
+          arg [CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o] ==> ignore
+          arg [-lgcc] ==> lib [gcc]
+          arg [--push-state] ==> ignore
+          arg [--as-needed] ==> ignore
+          arg [-lgcc_s] ==> lib [gcc_s]
+          arg [--pop-state] ==> ignore
+          arg [-lc] ==> lib [c]
+          arg [-lgcc] ==> lib [gcc]
+          arg [--push-state] ==> ignore
+          arg [--as-needed] ==> ignore
+          arg [-lgcc_s] ==> lib [gcc_s]
+          arg [--pop-state] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+        ignore line: [collect2 version 14.2.1 20240910]
+        ignore line: [/usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cc3hcm2q.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_834ca /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+        linker tool for 'C': /usr/bin/ld
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> [/usr/lib/Scrt1.o]
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> [/usr/lib/crti.o]
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> [/usr/lib/crtn.o]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> [/usr/lib]
+        collapse library dir [/lib/../lib] ==> [/lib]
+        collapse library dir [/usr/lib/../lib] ==> [/usr/lib]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> [/usr/lib]
+        implicit libs: [gcc;gcc_s;c;gcc;gcc_s]
+        implicit objs: [/usr/lib/Scrt1.o;/usr/lib/crti.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o;/usr/lib/crtn.o]
+        implicit dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib]
+        implicit fwks: []
+      
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CMakeDetermineLinkerId.cmake:40 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:255 (cmake_determine_linker_id)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Running the C compiler's linker: "/usr/bin/ld" "-v"
+      GNU ld (GNU Binutils) 2.43.0
+  -
+    kind: "try_compile-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:74 (try_compile)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    checks:
+      - "Detecting CXX compiler ABI info"
+    directories:
+      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-sO5Vxc"
+      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-sO5Vxc"
+    cmakeVariables:
+      CMAKE_CXX_FLAGS: ""
+      CMAKE_CXX_FLAGS_DEBUG: "-g"
+      CMAKE_CXX_SCAN_FOR_MODULES: "OFF"
+      CMAKE_EXE_LINKER_FLAGS: ""
+    buildResult:
+      variable: "CMAKE_CXX_ABI_COMPILED"
+      cached: true
+      stdout: |
+        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-sO5Vxc'
+        
+        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_8a98a
+        [1/2] /usr/bin/c++   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp
+        Using built-in specs.
+        COLLECT_GCC=/usr/bin/c++
+        Target: x86_64-pc-linux-gnu
+        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
+        Thread model: posix
+        Supported LTO compression algorithms: zlib zstd
+        gcc version 14.2.1 20240910 (GCC) 
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/'
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1plus -quiet -v -D_GNU_SOURCE /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp -quiet -dumpdir CMakeFiles/cmTC_8a98a.dir/ -dumpbase CMakeCXXCompilerABI.cpp.cpp -dumpbase-ext .cpp -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/cc0fUf3E.s
+        GNU C++17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)
+        	compiled by GNU C version 14.2.1 20240910, GMP version 6.3.0, MPFR version 4.2.1, MPC version 1.3.1, isl version isl-0.27-GMP
+        
+        GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
+        ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"
+        #include "..." search starts here:
+        #include <...> search starts here:
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include
+         /usr/local/include
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed
+         /usr/include
+        End of search list.
+        Compiler executable checksum: fce5a105c47978e141f61a441742cadf
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/'
+         as -v --64 -o CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o /tmp/cc0fUf3E.s
+        GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0
+        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
+        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.'
+        [2/2] : && /usr/bin/c++  -v -Wl,-v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -o cmTC_8a98a   && :
+        Using built-in specs.
+        COLLECT_GCC=/usr/bin/c++
+        COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper
+        Target: x86_64-pc-linux-gnu
+        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
+        Thread model: posix
+        Supported LTO compression algorithms: zlib zstd
+        gcc version 14.2.1 20240910 (GCC) 
+        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
+        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
+        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_8a98a' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_8a98a.'
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccjzVWgz.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_8a98a /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
+        collect2 version 14.2.1 20240910
+        /usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccjzVWgz.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_8a98a /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
+        GNU ld (GNU Binutils) 2.43.0
+        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_8a98a' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_8a98a.'
+        
+      exitCode: 0
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:182 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Parsed CXX implicit include dir info: rv=done
+        found start of include info
+        found start of implicit include info
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+          add: [/usr/local/include]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+          add: [/usr/include]
+        end of search list found
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1] ==> [/usr/include/c++/14.2.1]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu] ==> [/usr/include/c++/14.2.1/x86_64-pc-linux-gnu]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward] ==> [/usr/include/c++/14.2.1/backward]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+        collapse include dir [/usr/local/include] ==> [/usr/local/include]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+        collapse include dir [/usr/include] ==> [/usr/include]
+        implicit include dirs: [/usr/include/c++/14.2.1;/usr/include/c++/14.2.1/x86_64-pc-linux-gnu;/usr/include/c++/14.2.1/backward;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include]
+      
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:218 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Parsed CXX implicit link information:
+        link line regex: [^( *|.*[/\\])(ld[0-9]*(\\.[a-z]+)?|CMAKE_LINK_STARTFILE-NOTFOUND|([^/\\]+-)?ld|collect2)[^/\\]*( |$)]
+        linker tool regex: [^[ 	]*(->|")?[ 	]*(([^"]*[/\\])?(ld[0-9]*(\\.[a-z]+)?))("|,| |$)]
+        ignore line: [Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-sO5Vxc']
+        ignore line: []
+        ignore line: [Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_8a98a]
+        ignore line: [[1/2] /usr/bin/c++   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp]
+        ignore line: [Using built-in specs.]
+        ignore line: [COLLECT_GCC=/usr/bin/c++]
+        ignore line: [Target: x86_64-pc-linux-gnu]
+        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
+        ignore line: [Thread model: posix]
+        ignore line: [Supported LTO compression algorithms: zlib zstd]
+        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/']
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1plus -quiet -v -D_GNU_SOURCE /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp -quiet -dumpdir CMakeFiles/cmTC_8a98a.dir/ -dumpbase CMakeCXXCompilerABI.cpp.cpp -dumpbase-ext .cpp -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/cc0fUf3E.s]
+        ignore line: [GNU C++17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)]
+        ignore line: [	compiled by GNU C version 14.2.1 20240910  GMP version 6.3.0  MPFR version 4.2.1  MPC version 1.3.1  isl version isl-0.27-GMP]
+        ignore line: []
+        ignore line: [GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072]
+        ignore line: [ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"]
+        ignore line: [#include "..." search starts here:]
+        ignore line: [#include <...> search starts here:]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+        ignore line: [ /usr/local/include]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+        ignore line: [ /usr/include]
+        ignore line: [End of search list.]
+        ignore line: [Compiler executable checksum: fce5a105c47978e141f61a441742cadf]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/']
+        ignore line: [ as -v --64 -o CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o /tmp/cc0fUf3E.s]
+        ignore line: [GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0]
+        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
+        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.']
+        ignore line: [[2/2] : && /usr/bin/c++  -v -Wl -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -o cmTC_8a98a   && :]
+        ignore line: [Using built-in specs.]
+        ignore line: [COLLECT_GCC=/usr/bin/c++]
+        ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper]
+        ignore line: [Target: x86_64-pc-linux-gnu]
+        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
+        ignore line: [Thread model: posix]
+        ignore line: [Supported LTO compression algorithms: zlib zstd]
+        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
+        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
+        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
+        ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_8a98a' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_8a98a.']
+        link line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccjzVWgz.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_8a98a /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2] ==> ignore
+          arg [-plugin] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so] ==> ignore
+          arg [-plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper] ==> ignore
+          arg [-plugin-opt=-fresolution=/tmp/ccjzVWgz.res] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
+          arg [--build-id] ==> ignore
+          arg [--eh-frame-hdr] ==> ignore
+          arg [--hash-style=gnu] ==> ignore
+          arg [-m] ==> ignore
+          arg [elf_x86_64] ==> ignore
+          arg [-dynamic-linker] ==> ignore
+          arg [/lib64/ld-linux-x86-64.so.2] ==> ignore
+          arg [-pie] ==> ignore
+          arg [-o] ==> ignore
+          arg [cmTC_8a98a] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib]
+          arg [-L/lib/../lib] ==> dir [/lib/../lib]
+          arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..]
+          arg [-v] ==> ignore
+          arg [CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o] ==> ignore
+          arg [-lstdc++] ==> lib [stdc++]
+          arg [-lm] ==> lib [m]
+          arg [-lgcc_s] ==> lib [gcc_s]
+          arg [-lgcc] ==> lib [gcc]
+          arg [-lc] ==> lib [c]
+          arg [-lgcc_s] ==> lib [gcc_s]
+          arg [-lgcc] ==> lib [gcc]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+        ignore line: [collect2 version 14.2.1 20240910]
+        ignore line: [/usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccjzVWgz.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_8a98a /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+        linker tool for 'CXX': /usr/bin/ld
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> [/usr/lib/Scrt1.o]
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> [/usr/lib/crti.o]
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> [/usr/lib/crtn.o]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> [/usr/lib]
+        collapse library dir [/lib/../lib] ==> [/lib]
+        collapse library dir [/usr/lib/../lib] ==> [/usr/lib]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> [/usr/lib]
+        implicit libs: [stdc++;m;gcc_s;gcc;c;gcc_s;gcc]
+        implicit objs: [/usr/lib/Scrt1.o;/usr/lib/crti.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o;/usr/lib/crtn.o]
+        implicit dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib]
+        implicit fwks: []
+      
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CMakeDetermineLinkerId.cmake:40 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:255 (cmake_determine_linker_id)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Running the CXX compiler's linker: "/usr/bin/ld" "-v"
+      GNU ld (GNU Binutils) 2.43.0
+  -
+    kind: "try_compile-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CheckSourceCompiles.cmake:101 (try_compile)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CheckCSourceCompiles.cmake:52 (cmake_check_source_compiles)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/FindThreads.cmake:97 (CHECK_C_SOURCE_COMPILES)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/FindThreads.cmake:163 (_threads_check_libc)"
+      - "CMakeLists.txt:235 (find_package)"
+    checks:
+      - "Performing Test CMAKE_HAVE_LIBC_PTHREAD"
+    directories:
+      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-9jqBnk"
+      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-9jqBnk"
+    cmakeVariables:
+      CMAKE_C_FLAGS: ""
+      CMAKE_C_FLAGS_DEBUG: "-g"
+      CMAKE_EXE_LINKER_FLAGS: ""
+      CMAKE_MODULE_PATH: "/home/scarjit/Git/OrcaSlicer/cmake/modules/"
+      CMAKE_POSITION_INDEPENDENT_CODE: "ON"
+    buildResult:
+      variable: "CMAKE_HAVE_LIBC_PTHREAD"
+      cached: true
+      stdout: |
+        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-9jqBnk'
+        
+        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_85c24
+        [1/2] /usr/bin/cc -DCMAKE_HAVE_LIBC_PTHREAD  -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_85c24.dir/src.c.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-9jqBnk/src.c
+        [2/2] : && /usr/bin/cc   CMakeFiles/cmTC_85c24.dir/src.c.o -o cmTC_85c24   && :
+        
+      exitCode: 0
+  -
+    kind: "try_compile-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CheckIncludeFileCXX.cmake:89 (try_compile)"
+      - "cmake/modules/Findcereal.cmake:17 (CHECK_INCLUDE_FILE_CXX)"
+      - "CMakeLists.txt:544 (find_package)"
+    checks:
+      - "Looking for C++ include cereal/cereal.hpp"
+    directories:
+      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2"
+      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2"
+    cmakeVariables:
+      CMAKE_CXX_FLAGS: " -fext-numeric-literals -Wall -Wno-reorder"
+      CMAKE_CXX_FLAGS_DEBUG: "-g"
+      CMAKE_EXE_LINKER_FLAGS: ""
+      CMAKE_MODULE_PATH: "/home/scarjit/Git/OrcaSlicer/cmake/modules/"
+      CMAKE_POSITION_INDEPENDENT_CODE: "ON"
+    buildResult:
+      variable: "HAVE_CEREAL_H"
+      cached: true
+      stdout: |
+        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2'
+        
+        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_e14a3
+        [1/2] /usr/bin/c++   -fext-numeric-literals -Wall -Wno-reorder  -std=gnu++17 -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_e14a3.dir/CheckIncludeFile.cxx.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2/CheckIncludeFile.cxx
+        FAILED: CMakeFiles/cmTC_e14a3.dir/CheckIncludeFile.cxx.o 
+        /usr/bin/c++   -fext-numeric-literals -Wall -Wno-reorder  -std=gnu++17 -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_e14a3.dir/CheckIncludeFile.cxx.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2/CheckIncludeFile.cxx
+        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2/CheckIncludeFile.cxx:1:10: fatal error: cereal/cereal.hpp: No such file or directory
+            1 | #include <cereal/cereal.hpp>
+              |          ^~~~~~~~~~~~~~~~~~~
+        compilation terminated.
+        ninja: build stopped: subcommand failed.
+        
+      exitCode: 1
+...
diff --git a/cmake-build-debug/CMakeFiles/clion-Debug-log.txt b/cmake-build-debug/CMakeFiles/clion-Debug-log.txt
new file mode 100644
index 00000000000..79f8f4ca097
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/clion-Debug-log.txt
@@ -0,0 +1,66 @@
+/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake -DCMAKE_BUILD_TYPE=Debug -DCMAKE_MAKE_PROGRAM=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -G Ninja -S /home/scarjit/Git/OrcaSlicer -B /home/scarjit/Git/OrcaSlicer/cmake-build-debug
+-- The C compiler identification is GNU 14.2.1
+-- The CXX compiler identification is GNU 14.2.1
+-- Detecting C compiler ABI info
+-- Detecting C compiler ABI info - done
+-- Check for working C compiler: /usr/bin/cc - skipped
+-- Detecting C compile features
+-- Detecting C compile features - done
+-- Detecting CXX compiler ABI info
+-- Detecting CXX compiler ABI info - done
+-- Check for working CXX compiler: /usr/bin/c++ - skipped
+-- Detecting CXX compile features
+-- Detecting CXX compile features - done
+-- SLIC3R_ASAN: OFF
+-- SLIC3R_BUILD_SANDBOXES: OFF
+-- SLIC3R_BUILD_TESTS: OFF
+-- SLIC3R_DESKTOP_INTEGRATION: ON
+-- SLIC3R_FHS: OFF
+-- SLIC3R_GTK: 2
+-- SLIC3R_GUI: ON
+-- SLIC3R_MSVC_COMPILE_PARALLEL: ON
+-- SLIC3R_MSVC_PDB: ON
+-- SLIC3R_PCH: ON
+-- SLIC3R_PERL_XS: OFF
+-- SLIC3R_PROFILE: OFF
+-- SLIC3R_STATIC: OFF
+-- SLIC3R_WX_STABLE: OFF
+-- SLIC3R_STATIC: OFF
+-- CMAKE_PREFIX_PATH: (default)
+-- PROJECT_SOURCE_DIR: /home/scarjit/Git/OrcaSlicer
+-- CMAKE_MODULE_PATH: /home/scarjit/Git/OrcaSlicer/cmake/modules/
+-- Found PkgConfig: /usr/bin/pkg-config (found version "2.3.0")
+-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
+-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
+-- Found Threads: TRUE
+-- Found DBus: /usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
+-- LIBDIR: /home/scarjit/Git/OrcaSlicer/src
+-- LIBDIR_BIN: /home/scarjit/Git/OrcaSlicer/cmake-build-debug/src
+CMake Warning (dev) at CMakeLists.txt:415 (find_package):
+  Policy CMP0167 is not set: The FindBoost module is removed.  Run "cmake
+  --help-policy CMP0167" for policy details.  Use the cmake_policy command to
+  set the policy and suppress this warning.
+
+This warning is for project developers.  Use -Wno-dev to suppress it.
+
+-- Found Boost: /usr/lib/cmake/Boost-1.86.0/BoostConfig.cmake (found suitable version "1.86.0", minimum required is "1.66") found components: system filesystem thread log locale regex chrono atomic date_time iostreams program_options
+-- TBB found in /usr/lib/cmake/TBB
+-- Found OpenSSL: /usr/lib/libcrypto.so (found version "3.4.0")
+-- Found CURL: /usr/lib/libcurl.so (found version "8.11.1") 
+-- Found ZLIB: /usr/lib/libz.so (found version "1.3.1")
+-- Found Eigen3: /usr/include/eigen3 (Required is at least version "3.3")
+-- Found EXPAT: /usr/lib/libexpat.so (found version "2.6.4")
+-- Found PNG: /usr/lib/libpng.so (found version "1.6.44")
+-- Found OpenGL: /usr/lib/libOpenGL.so
+GLEW_ROOT: 
+-- Found GLEW: /usr/include (found version "2.2.0")
+-- Could NOT find cereal (missing: cereal_DIR)
+-- Looking for C++ include cereal/cereal.hpp
+-- Looking for C++ include cereal/cereal.hpp - not found
+CMake Error at cmake/modules/Findcereal.cmake:21 (message):
+  Cereal library not found.  Please install the dependency.
+Call Stack (most recent call first):
+  CMakeLists.txt:544 (find_package)
+
+
+-- Configuring incomplete, errors occurred!
diff --git a/cmake-build-debug/CMakeFiles/clion-environment.txt b/cmake-build-debug/CMakeFiles/clion-environment.txt
new file mode 100644
index 00000000000..292290e6b02
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/clion-environment.txt
@@ -0,0 +1,4 @@
+ToolSet: 1.0 (local)Ninja: 1.12.1@/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
+Options: 
+
+Options:-DCMAKE_MAKE_PROGRAM=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
\ No newline at end of file
diff --git a/cmake-build-debug/CMakeFiles/cmake.check_cache b/cmake-build-debug/CMakeFiles/cmake.check_cache
new file mode 100644
index 00000000000..3dccd731726
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/cmake.check_cache
@@ -0,0 +1 @@
+# This file is generated by cmake for dependency checking of the CMakeCache.txt file
diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json
index c8fdc74220b..7e6e041d4d1 100644
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -673,6 +673,10 @@
             "name": "fdm_filament_bvoh",
             "sub_path": "filament/fdm_filament_bvoh.json"
         },
+        {
+            "name": "fdm_filament_sbs",
+            "sub_path": "filament/fdm_filament_sbs.json"
+        },
         {
             "name": "Bambu PLA Matte @base",
             "sub_path": "filament/Bambu PLA Matte @base.json"
@@ -737,6 +741,10 @@
             "name": "Bambu PLA-CF @base",
             "sub_path": "filament/Bambu PLA-CF @base.json"
         },
+        {
+            "name": "Generic SBS @base",
+            "sub_path": "filament/Generic SBS @base.json"
+        },
         {
             "name": "Bambu Support For PLA @base",
             "sub_path": "filament/Bambu Support For PLA @base.json"
@@ -1397,6 +1405,10 @@
             "name": "Generic PLA @BBL A1M",
             "sub_path": "filament/Generic PLA @BBL A1M.json"
         },
+        {
+            "name": "Generic SBS",
+            "sub_path": "filament/Generic SBS.json"
+        },
         {
             "name": "Generic PLA @BBL A1M 0.2 nozzle",
             "sub_path": "filament/Generic PLA @BBL A1M 0.2 nozzle.json"

From 579a79d545f8d9d97acf2ff64a2799d4de64a85b Mon Sep 17 00:00:00 2001
From: Ferdinand Linnenberg <ferdinand@linnenberg.dev>
Date: Thu, 12 Dec 2024 15:53:13 +0100
Subject: [PATCH 6/8] fix: remove cmake-build-debug

---
 .../.cmake/api/v1/query/cache-v2              |   0
 .../.cmake/api/v1/query/cmakeFiles-v1         |   0
 .../.cmake/api/v1/query/codemodel-v2          |   0
 .../.cmake/api/v1/query/toolchains-v1         |   0
 cmake-build-debug/CMakeCache.txt              | 959 ------------------
 .../CMakeFiles/3.30.5/CMakeCCompiler.cmake    |  81 --
 .../CMakeFiles/3.30.5/CMakeCXXCompiler.cmake  | 105 --
 .../3.30.5/CMakeDetermineCompilerABI_C.bin    | Bin 15448 -> 0 bytes
 .../3.30.5/CMakeDetermineCompilerABI_CXX.bin  | Bin 15464 -> 0 bytes
 .../CMakeFiles/3.30.5/CMakeSystem.cmake       |  15 -
 .../3.30.5/CompilerIdC/CMakeCCompilerId.c     | 904 -----------------
 .../CMakeFiles/3.30.5/CompilerIdC/a.out       | Bin 15560 -> 0 bytes
 .../CompilerIdCXX/CMakeCXXCompilerId.cpp      | 919 -----------------
 .../CMakeFiles/3.30.5/CompilerIdCXX/a.out     | Bin 15576 -> 0 bytes
 .../CMakeFiles/CMakeConfigureLog.yaml         | 562 ----------
 .../CMakeFiles/clion-Debug-log.txt            |  66 --
 .../CMakeFiles/clion-environment.txt          |   4 -
 .../CMakeFiles/cmake.check_cache              |   1 -
 18 files changed, 3616 deletions(-)
 delete mode 100644 cmake-build-debug/.cmake/api/v1/query/cache-v2
 delete mode 100644 cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1
 delete mode 100644 cmake-build-debug/.cmake/api/v1/query/codemodel-v2
 delete mode 100644 cmake-build-debug/.cmake/api/v1/query/toolchains-v1
 delete mode 100644 cmake-build-debug/CMakeCache.txt
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
 delete mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin
 delete mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
 delete mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
 delete mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
 delete mode 100644 cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
 delete mode 100644 cmake-build-debug/CMakeFiles/clion-Debug-log.txt
 delete mode 100644 cmake-build-debug/CMakeFiles/clion-environment.txt
 delete mode 100644 cmake-build-debug/CMakeFiles/cmake.check_cache

diff --git a/cmake-build-debug/.cmake/api/v1/query/cache-v2 b/cmake-build-debug/.cmake/api/v1/query/cache-v2
deleted file mode 100644
index e69de29bb2d..00000000000
diff --git a/cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1 b/cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1
deleted file mode 100644
index e69de29bb2d..00000000000
diff --git a/cmake-build-debug/.cmake/api/v1/query/codemodel-v2 b/cmake-build-debug/.cmake/api/v1/query/codemodel-v2
deleted file mode 100644
index e69de29bb2d..00000000000
diff --git a/cmake-build-debug/.cmake/api/v1/query/toolchains-v1 b/cmake-build-debug/.cmake/api/v1/query/toolchains-v1
deleted file mode 100644
index e69de29bb2d..00000000000
diff --git a/cmake-build-debug/CMakeCache.txt b/cmake-build-debug/CMakeCache.txt
deleted file mode 100644
index 001e9469232..00000000000
--- a/cmake-build-debug/CMakeCache.txt
+++ /dev/null
@@ -1,959 +0,0 @@
-# This is the CMakeCache file.
-# For build in directory: /home/scarjit/Git/OrcaSlicer/cmake-build-debug
-# It was generated by CMake: /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake
-# You can edit this file to change values found and used by cmake.
-# If you do not want to change any of the values, simply exit the editor.
-# If you do want to change a value, simply edit, save, and exit the editor.
-# The syntax for the file is as follows:
-# KEY:TYPE=VALUE
-# KEY is the name of a variable in the cache.
-# TYPE is a hint to GUIs for the type of VALUE, DO NOT EDIT TYPE!.
-# VALUE is the current value for the KEY.
-
-########################
-# EXTERNAL cache entries
-########################
-
-Boost_ATOMIC_LIBRARY_RELEASE:STRING=/usr/lib/libboost_atomic.so.1.86.0
-
-Boost_CHRONO_LIBRARY_RELEASE:STRING=/usr/lib/libboost_chrono.so.1.86.0
-
-Boost_DATE_TIME_LIBRARY_RELEASE:STRING=/usr/lib/libboost_date_time.so.1.86.0
-
-//The directory containing a CMake configuration file for Boost.
-Boost_DIR:PATH=/usr/lib/cmake/Boost-1.86.0
-
-Boost_FILESYSTEM_LIBRARY_RELEASE:STRING=/usr/lib/libboost_filesystem.so.1.86.0
-
-//Path to a file.
-Boost_INCLUDE_DIR:PATH=/usr/include
-
-Boost_IOSTREAMS_LIBRARY_RELEASE:STRING=/usr/lib/libboost_iostreams.so.1.86.0
-
-Boost_LOCALE_LIBRARY_RELEASE:STRING=/usr/lib/libboost_locale.so.1.86.0
-
-Boost_LOG_LIBRARY_RELEASE:STRING=/usr/lib/libboost_log.so.1.86.0
-
-Boost_PROGRAM_OPTIONS_LIBRARY_RELEASE:STRING=/usr/lib/libboost_program_options.so.1.86.0
-
-Boost_REGEX_LIBRARY_RELEASE:STRING=/usr/lib/libboost_regex.so.1.86.0
-
-Boost_SYSTEM_LIBRARY_RELEASE:STRING=/usr/lib/libboost_system.so.1.86.0
-
-Boost_THREAD_LIBRARY_RELEASE:STRING=/usr/lib/libboost_thread.so.1.86.0
-
-//Path to a program.
-CMAKE_ADDR2LINE:FILEPATH=/usr/bin/addr2line
-
-//Path to a program.
-CMAKE_AR:FILEPATH=/usr/bin/ar
-
-//Choose the type of build, options are: None Debug Release RelWithDebInfo
-// MinSizeRel ...
-CMAKE_BUILD_TYPE:STRING=Debug
-
-//Enable colored diagnostics throughout.
-CMAKE_COLOR_DIAGNOSTICS:BOOL=ON
-
-//CXX compiler
-CMAKE_CXX_COMPILER:FILEPATH=/usr/bin/c++
-
-//A wrapper around 'ar' adding the appropriate '--plugin' option
-// for the GCC compiler
-CMAKE_CXX_COMPILER_AR:FILEPATH=/usr/bin/gcc-ar
-
-//A wrapper around 'ranlib' adding the appropriate '--plugin' option
-// for the GCC compiler
-CMAKE_CXX_COMPILER_RANLIB:FILEPATH=/usr/bin/gcc-ranlib
-
-//Flags used by the CXX compiler during all build types.
-CMAKE_CXX_FLAGS:STRING=
-
-//Flags used by the CXX compiler during DEBUG builds.
-CMAKE_CXX_FLAGS_DEBUG:STRING=-g
-
-//Flags used by the CXX compiler during MINSIZEREL builds.
-CMAKE_CXX_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG
-
-//Flags used by the CXX compiler during RELEASE builds.
-CMAKE_CXX_FLAGS_RELEASE:STRING=-O3 -DNDEBUG
-
-//Flags used by the CXX compiler during RELWITHDEBINFO builds.
-CMAKE_CXX_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG
-
-//C compiler
-CMAKE_C_COMPILER:FILEPATH=/usr/bin/cc
-
-//A wrapper around 'ar' adding the appropriate '--plugin' option
-// for the GCC compiler
-CMAKE_C_COMPILER_AR:FILEPATH=/usr/bin/gcc-ar
-
-//A wrapper around 'ranlib' adding the appropriate '--plugin' option
-// for the GCC compiler
-CMAKE_C_COMPILER_RANLIB:FILEPATH=/usr/bin/gcc-ranlib
-
-//Flags used by the C compiler during all build types.
-CMAKE_C_FLAGS:STRING=
-
-//Flags used by the C compiler during DEBUG builds.
-CMAKE_C_FLAGS_DEBUG:STRING=-g
-
-//Flags used by the C compiler during MINSIZEREL builds.
-CMAKE_C_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG
-
-//Flags used by the C compiler during RELEASE builds.
-CMAKE_C_FLAGS_RELEASE:STRING=-O3 -DNDEBUG
-
-//Flags used by the C compiler during RELWITHDEBINFO builds.
-CMAKE_C_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG
-
-//Path to a program.
-CMAKE_DLLTOOL:FILEPATH=CMAKE_DLLTOOL-NOTFOUND
-
-//Flags used by the linker during all build types.
-CMAKE_EXE_LINKER_FLAGS:STRING=
-
-//Flags used by the linker during DEBUG builds.
-CMAKE_EXE_LINKER_FLAGS_DEBUG:STRING=
-
-//Flags used by the linker during MINSIZEREL builds.
-CMAKE_EXE_LINKER_FLAGS_MINSIZEREL:STRING=
-
-//Flags used by the linker during RELEASE builds.
-CMAKE_EXE_LINKER_FLAGS_RELEASE:STRING=
-
-//Flags used by the linker during RELWITHDEBINFO builds.
-CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO:STRING=
-
-//Enable/Disable output of compile commands during generation.
-CMAKE_EXPORT_COMPILE_COMMANDS:BOOL=
-
-//Value Computed by CMake.
-CMAKE_FIND_PACKAGE_REDIRECTS_DIR:STATIC=/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/pkgRedirects
-
-//User executables (bin)
-CMAKE_INSTALL_BINDIR:PATH=bin
-
-//Read-only architecture-independent data (DATAROOTDIR)
-CMAKE_INSTALL_DATADIR:PATH=
-
-//Read-only architecture-independent data root (share)
-CMAKE_INSTALL_DATAROOTDIR:PATH=share
-
-//Documentation root (DATAROOTDIR/doc/PROJECT_NAME)
-CMAKE_INSTALL_DOCDIR:PATH=
-
-//C header files (include)
-CMAKE_INSTALL_INCLUDEDIR:PATH=include
-
-//Info documentation (DATAROOTDIR/info)
-CMAKE_INSTALL_INFODIR:PATH=
-
-//Object code libraries (lib)
-CMAKE_INSTALL_LIBDIR:PATH=lib
-
-//Program executables (libexec)
-CMAKE_INSTALL_LIBEXECDIR:PATH=libexec
-
-//Locale-dependent data (DATAROOTDIR/locale)
-CMAKE_INSTALL_LOCALEDIR:PATH=
-
-//Modifiable single-machine data (var)
-CMAKE_INSTALL_LOCALSTATEDIR:PATH=var
-
-//Man documentation (DATAROOTDIR/man)
-CMAKE_INSTALL_MANDIR:PATH=
-
-//C header files for non-gcc (/usr/include)
-CMAKE_INSTALL_OLDINCLUDEDIR:PATH=/usr/include
-
-//Install path prefix, prepended onto install directories.
-CMAKE_INSTALL_PREFIX:PATH=/usr/local
-
-//Run-time variable data (LOCALSTATEDIR/run)
-CMAKE_INSTALL_RUNSTATEDIR:PATH=
-
-//System admin executables (sbin)
-CMAKE_INSTALL_SBINDIR:PATH=sbin
-
-//Modifiable architecture-independent data (com)
-CMAKE_INSTALL_SHAREDSTATEDIR:PATH=com
-
-//Read-only single-machine data (etc)
-CMAKE_INSTALL_SYSCONFDIR:PATH=etc
-
-//Path to a program.
-CMAKE_LINKER:FILEPATH=/usr/bin/ld
-
-//No help, variable specified on the command line.
-CMAKE_MAKE_PROGRAM:UNINITIALIZED=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
-
-//Flags used by the linker during the creation of modules during
-// all build types.
-CMAKE_MODULE_LINKER_FLAGS:STRING=
-
-//Flags used by the linker during the creation of modules during
-// DEBUG builds.
-CMAKE_MODULE_LINKER_FLAGS_DEBUG:STRING=
-
-//Flags used by the linker during the creation of modules during
-// MINSIZEREL builds.
-CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL:STRING=
-
-//Flags used by the linker during the creation of modules during
-// RELEASE builds.
-CMAKE_MODULE_LINKER_FLAGS_RELEASE:STRING=
-
-//Flags used by the linker during the creation of modules during
-// RELWITHDEBINFO builds.
-CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO:STRING=
-
-//Path to a program.
-CMAKE_NM:FILEPATH=/usr/bin/nm
-
-//Path to a program.
-CMAKE_OBJCOPY:FILEPATH=/usr/bin/objcopy
-
-//Path to a program.
-CMAKE_OBJDUMP:FILEPATH=/usr/bin/objdump
-
-//Value Computed by CMake
-CMAKE_PROJECT_DESCRIPTION:STATIC=
-
-//Value Computed by CMake
-CMAKE_PROJECT_HOMEPAGE_URL:STATIC=
-
-//Value Computed by CMake
-CMAKE_PROJECT_NAME:STATIC=OrcaSlicer
-
-//Path to a program.
-CMAKE_RANLIB:FILEPATH=/usr/bin/ranlib
-
-//Path to a program.
-CMAKE_READELF:FILEPATH=/usr/bin/readelf
-
-//Flags used by the linker during the creation of shared libraries
-// during all build types.
-CMAKE_SHARED_LINKER_FLAGS:STRING=
-
-//Flags used by the linker during the creation of shared libraries
-// during DEBUG builds.
-CMAKE_SHARED_LINKER_FLAGS_DEBUG:STRING=
-
-//Flags used by the linker during the creation of shared libraries
-// during MINSIZEREL builds.
-CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL:STRING=
-
-//Flags used by the linker during the creation of shared libraries
-// during RELEASE builds.
-CMAKE_SHARED_LINKER_FLAGS_RELEASE:STRING=
-
-//Flags used by the linker during the creation of shared libraries
-// during RELWITHDEBINFO builds.
-CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO:STRING=
-
-//If set, runtime paths are not added when installing shared libraries,
-// but are added when building.
-CMAKE_SKIP_INSTALL_RPATH:BOOL=NO
-
-//If set, runtime paths are not added when using shared libraries.
-CMAKE_SKIP_RPATH:BOOL=NO
-
-//Flags used by the linker during the creation of static libraries
-// during all build types.
-CMAKE_STATIC_LINKER_FLAGS:STRING=
-
-//Flags used by the linker during the creation of static libraries
-// during DEBUG builds.
-CMAKE_STATIC_LINKER_FLAGS_DEBUG:STRING=
-
-//Flags used by the linker during the creation of static libraries
-// during MINSIZEREL builds.
-CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL:STRING=
-
-//Flags used by the linker during the creation of static libraries
-// during RELEASE builds.
-CMAKE_STATIC_LINKER_FLAGS_RELEASE:STRING=
-
-//Flags used by the linker during the creation of static libraries
-// during RELWITHDEBINFO builds.
-CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO:STRING=
-
-//Path to a program.
-CMAKE_STRIP:FILEPATH=/usr/bin/strip
-
-//Path to a program.
-CMAKE_TAPI:FILEPATH=CMAKE_TAPI-NOTFOUND
-
-//If this value is on, makefiles will be generated without the
-// .SILENT directive, and all commands will be echoed to the console
-// during the make.  This is useful for debugging only. With Visual
-// Studio IDE projects all commands are done without /nologo.
-CMAKE_VERBOSE_MAKEFILE:BOOL=FALSE
-
-//Path to a file.
-CURL_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-CURL_LIBRARY_DEBUG:FILEPATH=CURL_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-CURL_LIBRARY_RELEASE:FILEPATH=/usr/lib/libcurl.so
-
-//Path to a file.
-DBUS_ARCH_INCLUDE_DIR:PATH=/usr/lib/dbus-1.0/include
-
-//Path to a file.
-DBUS_INCLUDE_DIR:PATH=/usr/include/dbus-1.0
-
-//Path to a library.
-DBUS_LIBRARIES:FILEPATH=/usr/lib/libdbus-1.so
-
-//Path to a file.
-EIGEN3_INCLUDE_DIR:PATH=/usr/include/eigen3
-
-//Path to a file.
-EXPAT_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-EXPAT_LIBRARY_DEBUG:FILEPATH=EXPAT_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-EXPAT_LIBRARY_RELEASE:FILEPATH=/usr/lib/libexpat.so
-
-//Path to a file.
-GLEW_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-GLEW_SHARED_LIBRARY_DEBUG:FILEPATH=GLEW_SHARED_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-GLEW_SHARED_LIBRARY_RELEASE:FILEPATH=/usr/lib/libGLEW.so
-
-//Path to a library.
-GLEW_STATIC_LIBRARY_DEBUG:FILEPATH=GLEW_STATIC_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-GLEW_STATIC_LIBRARY_RELEASE:FILEPATH=GLEW_STATIC_LIBRARY_RELEASE-NOTFOUND
-
-//Path to a file.
-OPENGL_EGL_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_GLES2_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_GLES3_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_GLU_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_GLX_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-OPENGL_egl_LIBRARY:FILEPATH=/usr/lib/libEGL.so
-
-//Path to a library.
-OPENGL_gl_LIBRARY:FILEPATH=/usr/lib/libGL.so
-
-//Path to a library.
-OPENGL_gles2_LIBRARY:FILEPATH=/usr/lib/libGLESv2.so
-
-//Path to a library.
-OPENGL_gles3_LIBRARY:FILEPATH=/usr/lib/libGLESv2.so
-
-//Path to a library.
-OPENGL_glu_LIBRARY:FILEPATH=/usr/lib/libGLU.so
-
-//Path to a library.
-OPENGL_glx_LIBRARY:FILEPATH=/usr/lib/libGLX.so
-
-//Path to a library.
-OPENGL_opengl_LIBRARY:FILEPATH=/usr/lib/libOpenGL.so
-
-//Path to a file.
-OPENGL_xmesa_INCLUDE_DIR:PATH=OPENGL_xmesa_INCLUDE_DIR-NOTFOUND
-
-//Path to a library.
-OPENSSL_CRYPTO_LIBRARY:FILEPATH=/usr/lib/libcrypto.so
-
-//Path to a file.
-OPENSSL_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-OPENSSL_SSL_LIBRARY:FILEPATH=/usr/lib/libssl.so
-
-//Path to OpenVDB installation's find modules.
-OPENVDB_FIND_MODULE_PATH:PATH=
-
-//Build Orca tools
-ORCA_TOOLS:BOOL=OFF
-
-//Value Computed by CMake
-OrcaSlicer_BINARY_DIR:STATIC=/home/scarjit/Git/OrcaSlicer/cmake-build-debug
-
-//Value Computed by CMake
-OrcaSlicer_IS_TOP_LEVEL:STATIC=ON
-
-//Value Computed by CMake
-OrcaSlicer_SOURCE_DIR:STATIC=/home/scarjit/Git/OrcaSlicer
-
-//Arguments to supply to pkg-config
-PKG_CONFIG_ARGN:STRING=
-
-//pkg-config executable
-PKG_CONFIG_EXECUTABLE:FILEPATH=/usr/bin/pkg-config
-
-//Path to a library.
-PNG_LIBRARY_DEBUG:FILEPATH=PNG_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-PNG_LIBRARY_RELEASE:FILEPATH=/usr/lib/libpng.so
-
-//Path to a file.
-PNG_PNG_INCLUDE_DIR:PATH=/usr/include
-
-//Enable ASan on Clang and GCC
-SLIC3R_ASAN:BOOL=OFF
-
-//Build development sandboxes
-SLIC3R_BUILD_SANDBOXES:BOOL=OFF
-
-//Build unit tests
-SLIC3R_BUILD_TESTS:BOOL=OFF
-
-//Allow perfoming desktop integration during runtime
-SLIC3R_DESKTOP_INTEGRATION:BOOL=ON
-
-//Assume OrcaSlicer is to be installed in a FHS directory structure
-SLIC3R_FHS:BOOL=OFF
-
-//GTK version to use with wxWidgets on Linux
-SLIC3R_GTK:STRING=2
-
-//Compile OrcaSlicer with GUI components (OpenGL, wxWidgets)
-SLIC3R_GUI:BOOL=ON
-
-//Compile on Visual Studio in parallel
-SLIC3R_MSVC_COMPILE_PARALLEL:BOOL=ON
-
-//Generate PDB files on MSVC in Release mode
-SLIC3R_MSVC_PDB:BOOL=ON
-
-//Use precompiled headers
-SLIC3R_PCH:BOOL=ON
-
-//Compile XS Perl module and enable Perl unit and integration tests
-SLIC3R_PERL_XS:BOOL=OFF
-
-//Compile OrcaSlicer with an invasive Shiny profiler
-SLIC3R_PROFILE:BOOL=OFF
-
-//Compile OrcaSlicer with static libraries (Boost, TBB, glew)
-SLIC3R_STATIC:BOOL=OFF
-
-//Build against wxWidgets stable (3.0) as oppsed to dev (3.1) on
-// Linux
-SLIC3R_WX_STABLE:BOOL=OFF
-
-//The directory containing a CMake configuration file for TBB.
-TBB_DIR:PATH=/usr/lib/cmake/TBB
-
-//Path to a file.
-ZLIB_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-ZLIB_LIBRARY_DEBUG:FILEPATH=ZLIB_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-ZLIB_LIBRARY_RELEASE:FILEPATH=/usr/lib/libz.so
-
-//The directory containing a CMake configuration file for boost_atomic.
-boost_atomic_DIR:PATH=/usr/lib/cmake/boost_atomic-1.86.0
-
-//The directory containing a CMake configuration file for boost_chrono.
-boost_chrono_DIR:PATH=/usr/lib/cmake/boost_chrono-1.86.0
-
-//The directory containing a CMake configuration file for boost_date_time.
-boost_date_time_DIR:PATH=/usr/lib/cmake/boost_date_time-1.86.0
-
-//The directory containing a CMake configuration file for boost_filesystem.
-boost_filesystem_DIR:PATH=/usr/lib/cmake/boost_filesystem-1.86.0
-
-//The directory containing a CMake configuration file for boost_headers.
-boost_headers_DIR:PATH=/usr/lib/cmake/boost_headers-1.86.0
-
-//The directory containing a CMake configuration file for boost_iostreams.
-boost_iostreams_DIR:PATH=/usr/lib/cmake/boost_iostreams-1.86.0
-
-//The directory containing a CMake configuration file for boost_locale.
-boost_locale_DIR:PATH=/usr/lib/cmake/boost_locale-1.86.0
-
-//The directory containing a CMake configuration file for boost_log.
-boost_log_DIR:PATH=/usr/lib/cmake/boost_log-1.86.0
-
-//The directory containing a CMake configuration file for boost_program_options.
-boost_program_options_DIR:PATH=/usr/lib/cmake/boost_program_options-1.86.0
-
-//The directory containing a CMake configuration file for boost_regex.
-boost_regex_DIR:PATH=/usr/lib/cmake/boost_regex-1.86.0
-
-//The directory containing a CMake configuration file for boost_system.
-boost_system_DIR:PATH=/usr/lib/cmake/boost_system-1.86.0
-
-//The directory containing a CMake configuration file for boost_thread.
-boost_thread_DIR:PATH=/usr/lib/cmake/boost_thread-1.86.0
-
-//The directory containing a CMake configuration file for cereal.
-cereal_DIR:PATH=cereal_DIR-NOTFOUND
-
-//The directory containing a CMake configuration file for glfw3.
-glfw3_DIR:PATH=/usr/lib/cmake/glfw3
-
-//Path to a library.
-pkgcfg_lib_PC_DBUS_dbus-1:FILEPATH=/usr/lib/libdbus-1.so
-
-//Path to a library.
-pkgcfg_lib_PC_EXPAT_expat:FILEPATH=/usr/lib/libexpat.so
-
-//Path to a library.
-pkgcfg_lib__OPENSSL_crypto:FILEPATH=/usr/lib/libcrypto.so
-
-//Path to a library.
-pkgcfg_lib__OPENSSL_ssl:FILEPATH=/usr/lib/libssl.so
-
-
-########################
-# INTERNAL cache entries
-########################
-
-//ADVANCED property for variable: Boost_DIR
-Boost_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_ADDR2LINE
-CMAKE_ADDR2LINE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_AR
-CMAKE_AR-ADVANCED:INTERNAL=1
-//This is the directory where this CMakeCache.txt was created
-CMAKE_CACHEFILE_DIR:INTERNAL=/home/scarjit/Git/OrcaSlicer/cmake-build-debug
-//Major version of cmake used to create the current loaded cache
-CMAKE_CACHE_MAJOR_VERSION:INTERNAL=3
-//Minor version of cmake used to create the current loaded cache
-CMAKE_CACHE_MINOR_VERSION:INTERNAL=30
-//Patch version of cmake used to create the current loaded cache
-CMAKE_CACHE_PATCH_VERSION:INTERNAL=5
-//Path to CMake executable.
-CMAKE_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake
-//Path to cpack program executable.
-CMAKE_CPACK_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cpack
-//Path to ctest program executable.
-CMAKE_CTEST_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/ctest
-//ADVANCED property for variable: CMAKE_CXX_COMPILER
-CMAKE_CXX_COMPILER-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_COMPILER_AR
-CMAKE_CXX_COMPILER_AR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_COMPILER_RANLIB
-CMAKE_CXX_COMPILER_RANLIB-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS
-CMAKE_CXX_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS_DEBUG
-CMAKE_CXX_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS_MINSIZEREL
-CMAKE_CXX_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELEASE
-CMAKE_CXX_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELWITHDEBINFO
-CMAKE_CXX_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_COMPILER
-CMAKE_C_COMPILER-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_COMPILER_AR
-CMAKE_C_COMPILER_AR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_COMPILER_RANLIB
-CMAKE_C_COMPILER_RANLIB-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS
-CMAKE_C_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS_DEBUG
-CMAKE_C_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS_MINSIZEREL
-CMAKE_C_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS_RELEASE
-CMAKE_C_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS_RELWITHDEBINFO
-CMAKE_C_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_DLLTOOL
-CMAKE_DLLTOOL-ADVANCED:INTERNAL=1
-//Executable file format
-CMAKE_EXECUTABLE_FORMAT:INTERNAL=ELF
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS
-CMAKE_EXE_LINKER_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_DEBUG
-CMAKE_EXE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_MINSIZEREL
-CMAKE_EXE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELEASE
-CMAKE_EXE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO
-CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXPORT_COMPILE_COMMANDS
-CMAKE_EXPORT_COMPILE_COMMANDS-ADVANCED:INTERNAL=1
-//Name of external makefile project generator.
-CMAKE_EXTRA_GENERATOR:INTERNAL=
-//Name of generator.
-CMAKE_GENERATOR:INTERNAL=Ninja
-//Generator instance identifier.
-CMAKE_GENERATOR_INSTANCE:INTERNAL=
-//Name of generator platform.
-CMAKE_GENERATOR_PLATFORM:INTERNAL=
-//Name of generator toolset.
-CMAKE_GENERATOR_TOOLSET:INTERNAL=
-//Test CMAKE_HAVE_LIBC_PTHREAD
-CMAKE_HAVE_LIBC_PTHREAD:INTERNAL=1
-//Source directory with the top level CMakeLists.txt file for this
-// project
-CMAKE_HOME_DIRECTORY:INTERNAL=/home/scarjit/Git/OrcaSlicer
-//ADVANCED property for variable: CMAKE_INSTALL_BINDIR
-CMAKE_INSTALL_BINDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_DATADIR
-CMAKE_INSTALL_DATADIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_DATAROOTDIR
-CMAKE_INSTALL_DATAROOTDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_DOCDIR
-CMAKE_INSTALL_DOCDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_INCLUDEDIR
-CMAKE_INSTALL_INCLUDEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_INFODIR
-CMAKE_INSTALL_INFODIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_LIBDIR
-CMAKE_INSTALL_LIBDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_LIBEXECDIR
-CMAKE_INSTALL_LIBEXECDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_LOCALEDIR
-CMAKE_INSTALL_LOCALEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_LOCALSTATEDIR
-CMAKE_INSTALL_LOCALSTATEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_MANDIR
-CMAKE_INSTALL_MANDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_OLDINCLUDEDIR
-CMAKE_INSTALL_OLDINCLUDEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_RUNSTATEDIR
-CMAKE_INSTALL_RUNSTATEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_SBINDIR
-CMAKE_INSTALL_SBINDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_SHAREDSTATEDIR
-CMAKE_INSTALL_SHAREDSTATEDIR-ADVANCED:INTERNAL=1
-//Install .so files without execute permission.
-CMAKE_INSTALL_SO_NO_EXE:INTERNAL=0
-//ADVANCED property for variable: CMAKE_INSTALL_SYSCONFDIR
-CMAKE_INSTALL_SYSCONFDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_LINKER
-CMAKE_LINKER-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS
-CMAKE_MODULE_LINKER_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_DEBUG
-CMAKE_MODULE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL
-CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELEASE
-CMAKE_MODULE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO
-CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_NM
-CMAKE_NM-ADVANCED:INTERNAL=1
-//number of local generators
-CMAKE_NUMBER_OF_MAKEFILES:INTERNAL=1
-//ADVANCED property for variable: CMAKE_OBJCOPY
-CMAKE_OBJCOPY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_OBJDUMP
-CMAKE_OBJDUMP-ADVANCED:INTERNAL=1
-//Platform information initialized
-CMAKE_PLATFORM_INFO_INITIALIZED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_RANLIB
-CMAKE_RANLIB-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_READELF
-CMAKE_READELF-ADVANCED:INTERNAL=1
-//Path to CMake installation.
-CMAKE_ROOT:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS
-CMAKE_SHARED_LINKER_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_DEBUG
-CMAKE_SHARED_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL
-CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELEASE
-CMAKE_SHARED_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO
-CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SKIP_INSTALL_RPATH
-CMAKE_SKIP_INSTALL_RPATH-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SKIP_RPATH
-CMAKE_SKIP_RPATH-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS
-CMAKE_STATIC_LINKER_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_DEBUG
-CMAKE_STATIC_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL
-CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELEASE
-CMAKE_STATIC_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO
-CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STRIP
-CMAKE_STRIP-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_TAPI
-CMAKE_TAPI-ADVANCED:INTERNAL=1
-//uname command
-CMAKE_UNAME:INTERNAL=/usr/bin/uname
-//ADVANCED property for variable: CMAKE_VERBOSE_MAKEFILE
-CMAKE_VERBOSE_MAKEFILE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CURL_INCLUDE_DIR
-CURL_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CURL_LIBRARY_DEBUG
-CURL_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CURL_LIBRARY_RELEASE
-CURL_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: EIGEN3_INCLUDE_DIR
-EIGEN3_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: EXPAT_INCLUDE_DIR
-EXPAT_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: EXPAT_LIBRARY_DEBUG
-EXPAT_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: EXPAT_LIBRARY_RELEASE
-EXPAT_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//Details about finding Boost
-FIND_PACKAGE_MESSAGE_DETAILS_Boost:INTERNAL=[/usr/lib/cmake/Boost-1.86.0/BoostConfig.cmake][cfound components: system filesystem thread log locale regex chrono atomic date_time iostreams program_options ][v1.86.0(1.66)]
-//Details about finding CURL
-FIND_PACKAGE_MESSAGE_DETAILS_CURL:INTERNAL=[/usr/lib/libcurl.so][/usr/include][v8.11.1()]
-//Details about finding DBus
-FIND_PACKAGE_MESSAGE_DETAILS_DBus:INTERNAL=[/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include][/usr/lib/libdbus-1.so][v()]
-//Details about finding EXPAT
-FIND_PACKAGE_MESSAGE_DETAILS_EXPAT:INTERNAL=[/usr/lib/libexpat.so][/usr/include][v2.6.4()]
-//Details about finding Eigen3
-FIND_PACKAGE_MESSAGE_DETAILS_Eigen3:INTERNAL=[/usr/include/eigen3][TRUE][v(3.3)]
-//Details about finding GLEW
-FIND_PACKAGE_MESSAGE_DETAILS_GLEW:INTERNAL=[/usr/include][/usr/lib/libGLEW.so][v2.2.0()]
-//Details about finding OpenGL
-FIND_PACKAGE_MESSAGE_DETAILS_OpenGL:INTERNAL=[/usr/lib/libOpenGL.so][/usr/lib/libGLX.so][/usr/include][c ][v()]
-//Details about finding OpenSSL
-FIND_PACKAGE_MESSAGE_DETAILS_OpenSSL:INTERNAL=[/usr/lib/libcrypto.so][/usr/include][c ][v3.4.0()]
-//Details about finding PNG
-FIND_PACKAGE_MESSAGE_DETAILS_PNG:INTERNAL=[/usr/lib/libpng.so][/usr/include][v1.6.44()]
-//Details about finding PkgConfig
-FIND_PACKAGE_MESSAGE_DETAILS_PkgConfig:INTERNAL=[/usr/bin/pkg-config][v2.3.0()]
-//Details about finding Threads
-FIND_PACKAGE_MESSAGE_DETAILS_Threads:INTERNAL=[TRUE][v()]
-//Details about finding ZLIB
-FIND_PACKAGE_MESSAGE_DETAILS_ZLIB:INTERNAL=[/usr/lib/libz.so][/usr/include][c ][v1.3.1()]
-//ADVANCED property for variable: GLEW_INCLUDE_DIR
-GLEW_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: GLEW_SHARED_LIBRARY_DEBUG
-GLEW_SHARED_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: GLEW_SHARED_LIBRARY_RELEASE
-GLEW_SHARED_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: GLEW_STATIC_LIBRARY_DEBUG
-GLEW_STATIC_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: GLEW_STATIC_LIBRARY_RELEASE
-GLEW_STATIC_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//Have include cereal/cereal.hpp
-HAVE_CEREAL_H:INTERNAL=
-//ADVANCED property for variable: OPENGL_EGL_INCLUDE_DIR
-OPENGL_EGL_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_GLES2_INCLUDE_DIR
-OPENGL_GLES2_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_GLES3_INCLUDE_DIR
-OPENGL_GLES3_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_GLU_INCLUDE_DIR
-OPENGL_GLU_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_GLX_INCLUDE_DIR
-OPENGL_GLX_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_INCLUDE_DIR
-OPENGL_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_egl_LIBRARY
-OPENGL_egl_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_gl_LIBRARY
-OPENGL_gl_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_gles2_LIBRARY
-OPENGL_gles2_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_gles3_LIBRARY
-OPENGL_gles3_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_glu_LIBRARY
-OPENGL_glu_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_glx_LIBRARY
-OPENGL_glx_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_opengl_LIBRARY
-OPENGL_opengl_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_xmesa_INCLUDE_DIR
-OPENGL_xmesa_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENSSL_CRYPTO_LIBRARY
-OPENSSL_CRYPTO_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENSSL_INCLUDE_DIR
-OPENSSL_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENSSL_SSL_LIBRARY
-OPENSSL_SSL_LIBRARY-ADVANCED:INTERNAL=1
-PC_DBUS_CFLAGS:INTERNAL=-I/usr/include/dbus-1.0;-I/usr/lib/dbus-1.0/include
-PC_DBUS_CFLAGS_I:INTERNAL=
-PC_DBUS_CFLAGS_OTHER:INTERNAL=
-PC_DBUS_FOUND:INTERNAL=1
-PC_DBUS_INCLUDEDIR:INTERNAL=/usr/include
-PC_DBUS_INCLUDE_DIRS:INTERNAL=/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
-PC_DBUS_LDFLAGS:INTERNAL=-L/usr/lib;-ldbus-1
-PC_DBUS_LDFLAGS_OTHER:INTERNAL=
-PC_DBUS_LIBDIR:INTERNAL=/usr/lib
-PC_DBUS_LIBRARIES:INTERNAL=dbus-1
-PC_DBUS_LIBRARY_DIRS:INTERNAL=/usr/lib
-PC_DBUS_LIBS:INTERNAL=
-PC_DBUS_LIBS_L:INTERNAL=
-PC_DBUS_LIBS_OTHER:INTERNAL=
-PC_DBUS_LIBS_PATHS:INTERNAL=
-PC_DBUS_MODULE_NAME:INTERNAL=dbus-1
-PC_DBUS_PREFIX:INTERNAL=/usr
-PC_DBUS_STATIC_CFLAGS:INTERNAL=-I/usr/include/dbus-1.0;-I/usr/lib/dbus-1.0/include
-PC_DBUS_STATIC_CFLAGS_I:INTERNAL=
-PC_DBUS_STATIC_CFLAGS_OTHER:INTERNAL=
-PC_DBUS_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
-PC_DBUS_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-ldbus-1;-lsystemd
-PC_DBUS_STATIC_LDFLAGS_OTHER:INTERNAL=
-PC_DBUS_STATIC_LIBDIR:INTERNAL=
-PC_DBUS_STATIC_LIBRARIES:INTERNAL=dbus-1;systemd
-PC_DBUS_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
-PC_DBUS_STATIC_LIBS:INTERNAL=
-PC_DBUS_STATIC_LIBS_L:INTERNAL=
-PC_DBUS_STATIC_LIBS_OTHER:INTERNAL=
-PC_DBUS_STATIC_LIBS_PATHS:INTERNAL=
-PC_DBUS_VERSION:INTERNAL=1.14.10
-PC_DBUS_dbus-1_INCLUDEDIR:INTERNAL=
-PC_DBUS_dbus-1_LIBDIR:INTERNAL=
-PC_DBUS_dbus-1_PREFIX:INTERNAL=
-PC_DBUS_dbus-1_VERSION:INTERNAL=
-PC_EXPAT_CFLAGS:INTERNAL=-I/usr/include
-PC_EXPAT_CFLAGS_I:INTERNAL=
-PC_EXPAT_CFLAGS_OTHER:INTERNAL=
-PC_EXPAT_FOUND:INTERNAL=1
-PC_EXPAT_INCLUDEDIR:INTERNAL=/usr/include
-PC_EXPAT_INCLUDE_DIRS:INTERNAL=/usr/include
-PC_EXPAT_LDFLAGS:INTERNAL=-L/usr/lib;-lexpat
-PC_EXPAT_LDFLAGS_OTHER:INTERNAL=
-PC_EXPAT_LIBDIR:INTERNAL=/usr/lib
-PC_EXPAT_LIBRARIES:INTERNAL=expat
-PC_EXPAT_LIBRARY_DIRS:INTERNAL=/usr/lib
-PC_EXPAT_LIBS:INTERNAL=
-PC_EXPAT_LIBS_L:INTERNAL=
-PC_EXPAT_LIBS_OTHER:INTERNAL=
-PC_EXPAT_LIBS_PATHS:INTERNAL=
-PC_EXPAT_MODULE_NAME:INTERNAL=expat
-PC_EXPAT_PREFIX:INTERNAL=/usr
-PC_EXPAT_STATIC_CFLAGS:INTERNAL=-I/usr/include;-DXML_STATIC
-PC_EXPAT_STATIC_CFLAGS_I:INTERNAL=
-PC_EXPAT_STATIC_CFLAGS_OTHER:INTERNAL=-DXML_STATIC
-PC_EXPAT_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include
-PC_EXPAT_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-lexpat;-lm
-PC_EXPAT_STATIC_LDFLAGS_OTHER:INTERNAL=
-PC_EXPAT_STATIC_LIBDIR:INTERNAL=
-PC_EXPAT_STATIC_LIBRARIES:INTERNAL=expat;m
-PC_EXPAT_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
-PC_EXPAT_STATIC_LIBS:INTERNAL=
-PC_EXPAT_STATIC_LIBS_L:INTERNAL=
-PC_EXPAT_STATIC_LIBS_OTHER:INTERNAL=
-PC_EXPAT_STATIC_LIBS_PATHS:INTERNAL=
-PC_EXPAT_VERSION:INTERNAL=2.6.4
-PC_EXPAT_expat_INCLUDEDIR:INTERNAL=
-PC_EXPAT_expat_LIBDIR:INTERNAL=
-PC_EXPAT_expat_PREFIX:INTERNAL=
-PC_EXPAT_expat_VERSION:INTERNAL=
-//ADVANCED property for variable: PKG_CONFIG_ARGN
-PKG_CONFIG_ARGN-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: PKG_CONFIG_EXECUTABLE
-PKG_CONFIG_EXECUTABLE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: PNG_LIBRARY_DEBUG
-PNG_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: PNG_LIBRARY_RELEASE
-PNG_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: PNG_PNG_INCLUDE_DIR
-PNG_PNG_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: ZLIB_INCLUDE_DIR
-ZLIB_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: ZLIB_LIBRARY_DEBUG
-ZLIB_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: ZLIB_LIBRARY_RELEASE
-ZLIB_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//linker supports push/pop state
-_CMAKE_LINKER_PUSHPOP_STATE_SUPPORTED:INTERNAL=TRUE
-//CMAKE_INSTALL_PREFIX during last run
-_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX:INTERNAL=/usr/local
-_OPENSSL_CFLAGS:INTERNAL=-I/usr/include
-_OPENSSL_CFLAGS_I:INTERNAL=
-_OPENSSL_CFLAGS_OTHER:INTERNAL=
-_OPENSSL_FOUND:INTERNAL=1
-_OPENSSL_INCLUDEDIR:INTERNAL=/usr/include
-_OPENSSL_INCLUDE_DIRS:INTERNAL=/usr/include
-_OPENSSL_LDFLAGS:INTERNAL=-L/usr/lib;-lssl;-lcrypto
-_OPENSSL_LDFLAGS_OTHER:INTERNAL=
-_OPENSSL_LIBDIR:INTERNAL=/usr/lib
-_OPENSSL_LIBRARIES:INTERNAL=ssl;crypto
-_OPENSSL_LIBRARY_DIRS:INTERNAL=/usr/lib
-_OPENSSL_LIBS:INTERNAL=
-_OPENSSL_LIBS_L:INTERNAL=
-_OPENSSL_LIBS_OTHER:INTERNAL=
-_OPENSSL_LIBS_PATHS:INTERNAL=
-_OPENSSL_MODULE_NAME:INTERNAL=openssl
-_OPENSSL_PREFIX:INTERNAL=/usr
-_OPENSSL_STATIC_CFLAGS:INTERNAL=-I/usr/include
-_OPENSSL_STATIC_CFLAGS_I:INTERNAL=
-_OPENSSL_STATIC_CFLAGS_OTHER:INTERNAL=
-_OPENSSL_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include
-_OPENSSL_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-lssl;-lcrypto;-ldl;-pthread
-_OPENSSL_STATIC_LDFLAGS_OTHER:INTERNAL=-pthread
-_OPENSSL_STATIC_LIBDIR:INTERNAL=
-_OPENSSL_STATIC_LIBRARIES:INTERNAL=ssl;crypto;dl
-_OPENSSL_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
-_OPENSSL_STATIC_LIBS:INTERNAL=
-_OPENSSL_STATIC_LIBS_L:INTERNAL=
-_OPENSSL_STATIC_LIBS_OTHER:INTERNAL=
-_OPENSSL_STATIC_LIBS_PATHS:INTERNAL=
-_OPENSSL_VERSION:INTERNAL=3.4.0
-_OPENSSL_openssl_INCLUDEDIR:INTERNAL=
-_OPENSSL_openssl_LIBDIR:INTERNAL=
-_OPENSSL_openssl_PREFIX:INTERNAL=
-_OPENSSL_openssl_VERSION:INTERNAL=
-__pkg_config_arguments_PC_DBUS:INTERNAL=QUIET;dbus-1
-__pkg_config_arguments_PC_EXPAT:INTERNAL=QUIET;expat
-__pkg_config_arguments__OPENSSL:INTERNAL=QUIET;openssl
-__pkg_config_checked_PC_DBUS:INTERNAL=1
-__pkg_config_checked_PC_EXPAT:INTERNAL=1
-__pkg_config_checked__OPENSSL:INTERNAL=1
-//ADVANCED property for variable: boost_atomic_DIR
-boost_atomic_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_chrono_DIR
-boost_chrono_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_date_time_DIR
-boost_date_time_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_filesystem_DIR
-boost_filesystem_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_headers_DIR
-boost_headers_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_iostreams_DIR
-boost_iostreams_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_locale_DIR
-boost_locale_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_log_DIR
-boost_log_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_program_options_DIR
-boost_program_options_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_regex_DIR
-boost_regex_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_system_DIR
-boost_system_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_thread_DIR
-boost_thread_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: pkgcfg_lib_PC_DBUS_dbus-1
-pkgcfg_lib_PC_DBUS_dbus-1-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: pkgcfg_lib_PC_EXPAT_expat
-pkgcfg_lib_PC_EXPAT_expat-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: pkgcfg_lib__OPENSSL_crypto
-pkgcfg_lib__OPENSSL_crypto-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: pkgcfg_lib__OPENSSL_ssl
-pkgcfg_lib__OPENSSL_ssl-ADVANCED:INTERNAL=1
-prefix_result:INTERNAL=/usr/lib
-
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
deleted file mode 100644
index d69cb8dd938..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
+++ /dev/null
@@ -1,81 +0,0 @@
-set(CMAKE_C_COMPILER "/usr/bin/cc")
-set(CMAKE_C_COMPILER_ARG1 "")
-set(CMAKE_C_COMPILER_ID "GNU")
-set(CMAKE_C_COMPILER_VERSION "14.2.1")
-set(CMAKE_C_COMPILER_VERSION_INTERNAL "")
-set(CMAKE_C_COMPILER_WRAPPER "")
-set(CMAKE_C_STANDARD_COMPUTED_DEFAULT "17")
-set(CMAKE_C_EXTENSIONS_COMPUTED_DEFAULT "ON")
-set(CMAKE_C_STANDARD_LATEST "23")
-set(CMAKE_C_COMPILE_FEATURES "c_std_90;c_function_prototypes;c_std_99;c_restrict;c_variadic_macros;c_std_11;c_static_assert;c_std_17;c_std_23")
-set(CMAKE_C90_COMPILE_FEATURES "c_std_90;c_function_prototypes")
-set(CMAKE_C99_COMPILE_FEATURES "c_std_99;c_restrict;c_variadic_macros")
-set(CMAKE_C11_COMPILE_FEATURES "c_std_11;c_static_assert")
-set(CMAKE_C17_COMPILE_FEATURES "c_std_17")
-set(CMAKE_C23_COMPILE_FEATURES "c_std_23")
-
-set(CMAKE_C_PLATFORM_ID "Linux")
-set(CMAKE_C_SIMULATE_ID "")
-set(CMAKE_C_COMPILER_FRONTEND_VARIANT "GNU")
-set(CMAKE_C_SIMULATE_VERSION "")
-
-
-
-
-set(CMAKE_AR "/usr/bin/ar")
-set(CMAKE_C_COMPILER_AR "/usr/bin/gcc-ar")
-set(CMAKE_RANLIB "/usr/bin/ranlib")
-set(CMAKE_C_COMPILER_RANLIB "/usr/bin/gcc-ranlib")
-set(CMAKE_LINKER "/usr/bin/ld")
-set(CMAKE_LINKER_LINK "")
-set(CMAKE_LINKER_LLD "")
-set(CMAKE_C_COMPILER_LINKER "/usr/bin/ld")
-set(CMAKE_C_COMPILER_LINKER_ID "GNU")
-set(CMAKE_C_COMPILER_LINKER_VERSION 2.43.0)
-set(CMAKE_C_COMPILER_LINKER_FRONTEND_VARIANT GNU)
-set(CMAKE_MT "")
-set(CMAKE_TAPI "CMAKE_TAPI-NOTFOUND")
-set(CMAKE_COMPILER_IS_GNUCC 1)
-set(CMAKE_C_COMPILER_LOADED 1)
-set(CMAKE_C_COMPILER_WORKS TRUE)
-set(CMAKE_C_ABI_COMPILED TRUE)
-
-set(CMAKE_C_COMPILER_ENV_VAR "CC")
-
-set(CMAKE_C_COMPILER_ID_RUN 1)
-set(CMAKE_C_SOURCE_FILE_EXTENSIONS c;m)
-set(CMAKE_C_IGNORE_EXTENSIONS h;H;o;O;obj;OBJ;def;DEF;rc;RC)
-set(CMAKE_C_LINKER_PREFERENCE 10)
-set(CMAKE_C_LINKER_DEPFILE_SUPPORTED FALSE)
-
-# Save compiler ABI information.
-set(CMAKE_C_SIZEOF_DATA_PTR "8")
-set(CMAKE_C_COMPILER_ABI "ELF")
-set(CMAKE_C_BYTE_ORDER "LITTLE_ENDIAN")
-set(CMAKE_C_LIBRARY_ARCHITECTURE "")
-
-if(CMAKE_C_SIZEOF_DATA_PTR)
-  set(CMAKE_SIZEOF_VOID_P "${CMAKE_C_SIZEOF_DATA_PTR}")
-endif()
-
-if(CMAKE_C_COMPILER_ABI)
-  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_C_COMPILER_ABI}")
-endif()
-
-if(CMAKE_C_LIBRARY_ARCHITECTURE)
-  set(CMAKE_LIBRARY_ARCHITECTURE "")
-endif()
-
-set(CMAKE_C_CL_SHOWINCLUDES_PREFIX "")
-if(CMAKE_C_CL_SHOWINCLUDES_PREFIX)
-  set(CMAKE_CL_SHOWINCLUDES_PREFIX "${CMAKE_C_CL_SHOWINCLUDES_PREFIX}")
-endif()
-
-
-
-
-
-set(CMAKE_C_IMPLICIT_INCLUDE_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include")
-set(CMAKE_C_IMPLICIT_LINK_LIBRARIES "gcc;gcc_s;c;gcc;gcc_s")
-set(CMAKE_C_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib")
-set(CMAKE_C_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "")
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
deleted file mode 100644
index 7a492576727..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
+++ /dev/null
@@ -1,105 +0,0 @@
-set(CMAKE_CXX_COMPILER "/usr/bin/c++")
-set(CMAKE_CXX_COMPILER_ARG1 "")
-set(CMAKE_CXX_COMPILER_ID "GNU")
-set(CMAKE_CXX_COMPILER_VERSION "14.2.1")
-set(CMAKE_CXX_COMPILER_VERSION_INTERNAL "")
-set(CMAKE_CXX_COMPILER_WRAPPER "")
-set(CMAKE_CXX_STANDARD_COMPUTED_DEFAULT "17")
-set(CMAKE_CXX_EXTENSIONS_COMPUTED_DEFAULT "ON")
-set(CMAKE_CXX_STANDARD_LATEST "26")
-set(CMAKE_CXX_COMPILE_FEATURES "cxx_std_98;cxx_template_template_parameters;cxx_std_11;cxx_alias_templates;cxx_alignas;cxx_alignof;cxx_attributes;cxx_auto_type;cxx_constexpr;cxx_decltype;cxx_decltype_incomplete_return_types;cxx_default_function_template_args;cxx_defaulted_functions;cxx_defaulted_move_initializers;cxx_delegating_constructors;cxx_deleted_functions;cxx_enum_forward_declarations;cxx_explicit_conversions;cxx_extended_friend_declarations;cxx_extern_templates;cxx_final;cxx_func_identifier;cxx_generalized_initializers;cxx_inheriting_constructors;cxx_inline_namespaces;cxx_lambdas;cxx_local_type_template_args;cxx_long_long_type;cxx_noexcept;cxx_nonstatic_member_init;cxx_nullptr;cxx_override;cxx_range_for;cxx_raw_string_literals;cxx_reference_qualified_functions;cxx_right_angle_brackets;cxx_rvalue_references;cxx_sizeof_member;cxx_static_assert;cxx_strong_enums;cxx_thread_local;cxx_trailing_return_types;cxx_unicode_literals;cxx_uniform_initialization;cxx_unrestricted_unions;cxx_user_literals;cxx_variadic_macros;cxx_variadic_templates;cxx_std_14;cxx_aggregate_default_initializers;cxx_attribute_deprecated;cxx_binary_literals;cxx_contextual_conversions;cxx_decltype_auto;cxx_digit_separators;cxx_generic_lambdas;cxx_lambda_init_captures;cxx_relaxed_constexpr;cxx_return_type_deduction;cxx_variable_templates;cxx_std_17;cxx_std_20;cxx_std_23;cxx_std_26")
-set(CMAKE_CXX98_COMPILE_FEATURES "cxx_std_98;cxx_template_template_parameters")
-set(CMAKE_CXX11_COMPILE_FEATURES "cxx_std_11;cxx_alias_templates;cxx_alignas;cxx_alignof;cxx_attributes;cxx_auto_type;cxx_constexpr;cxx_decltype;cxx_decltype_incomplete_return_types;cxx_default_function_template_args;cxx_defaulted_functions;cxx_defaulted_move_initializers;cxx_delegating_constructors;cxx_deleted_functions;cxx_enum_forward_declarations;cxx_explicit_conversions;cxx_extended_friend_declarations;cxx_extern_templates;cxx_final;cxx_func_identifier;cxx_generalized_initializers;cxx_inheriting_constructors;cxx_inline_namespaces;cxx_lambdas;cxx_local_type_template_args;cxx_long_long_type;cxx_noexcept;cxx_nonstatic_member_init;cxx_nullptr;cxx_override;cxx_range_for;cxx_raw_string_literals;cxx_reference_qualified_functions;cxx_right_angle_brackets;cxx_rvalue_references;cxx_sizeof_member;cxx_static_assert;cxx_strong_enums;cxx_thread_local;cxx_trailing_return_types;cxx_unicode_literals;cxx_uniform_initialization;cxx_unrestricted_unions;cxx_user_literals;cxx_variadic_macros;cxx_variadic_templates")
-set(CMAKE_CXX14_COMPILE_FEATURES "cxx_std_14;cxx_aggregate_default_initializers;cxx_attribute_deprecated;cxx_binary_literals;cxx_contextual_conversions;cxx_decltype_auto;cxx_digit_separators;cxx_generic_lambdas;cxx_lambda_init_captures;cxx_relaxed_constexpr;cxx_return_type_deduction;cxx_variable_templates")
-set(CMAKE_CXX17_COMPILE_FEATURES "cxx_std_17")
-set(CMAKE_CXX20_COMPILE_FEATURES "cxx_std_20")
-set(CMAKE_CXX23_COMPILE_FEATURES "cxx_std_23")
-set(CMAKE_CXX26_COMPILE_FEATURES "cxx_std_26")
-
-set(CMAKE_CXX_PLATFORM_ID "Linux")
-set(CMAKE_CXX_SIMULATE_ID "")
-set(CMAKE_CXX_COMPILER_FRONTEND_VARIANT "GNU")
-set(CMAKE_CXX_SIMULATE_VERSION "")
-
-
-
-
-set(CMAKE_AR "/usr/bin/ar")
-set(CMAKE_CXX_COMPILER_AR "/usr/bin/gcc-ar")
-set(CMAKE_RANLIB "/usr/bin/ranlib")
-set(CMAKE_CXX_COMPILER_RANLIB "/usr/bin/gcc-ranlib")
-set(CMAKE_LINKER "/usr/bin/ld")
-set(CMAKE_LINKER_LINK "")
-set(CMAKE_LINKER_LLD "")
-set(CMAKE_CXX_COMPILER_LINKER "/usr/bin/ld")
-set(CMAKE_CXX_COMPILER_LINKER_ID "GNU")
-set(CMAKE_CXX_COMPILER_LINKER_VERSION 2.43.0)
-set(CMAKE_CXX_COMPILER_LINKER_FRONTEND_VARIANT GNU)
-set(CMAKE_MT "")
-set(CMAKE_TAPI "CMAKE_TAPI-NOTFOUND")
-set(CMAKE_COMPILER_IS_GNUCXX 1)
-set(CMAKE_CXX_COMPILER_LOADED 1)
-set(CMAKE_CXX_COMPILER_WORKS TRUE)
-set(CMAKE_CXX_ABI_COMPILED TRUE)
-
-set(CMAKE_CXX_COMPILER_ENV_VAR "CXX")
-
-set(CMAKE_CXX_COMPILER_ID_RUN 1)
-set(CMAKE_CXX_SOURCE_FILE_EXTENSIONS C;M;c++;cc;cpp;cxx;m;mm;mpp;CPP;ixx;cppm;ccm;cxxm;c++m)
-set(CMAKE_CXX_IGNORE_EXTENSIONS inl;h;hpp;HPP;H;o;O;obj;OBJ;def;DEF;rc;RC)
-
-foreach (lang IN ITEMS C OBJC OBJCXX)
-  if (CMAKE_${lang}_COMPILER_ID_RUN)
-    foreach(extension IN LISTS CMAKE_${lang}_SOURCE_FILE_EXTENSIONS)
-      list(REMOVE_ITEM CMAKE_CXX_SOURCE_FILE_EXTENSIONS ${extension})
-    endforeach()
-  endif()
-endforeach()
-
-set(CMAKE_CXX_LINKER_PREFERENCE 30)
-set(CMAKE_CXX_LINKER_PREFERENCE_PROPAGATES 1)
-set(CMAKE_CXX_LINKER_DEPFILE_SUPPORTED FALSE)
-
-# Save compiler ABI information.
-set(CMAKE_CXX_SIZEOF_DATA_PTR "8")
-set(CMAKE_CXX_COMPILER_ABI "ELF")
-set(CMAKE_CXX_BYTE_ORDER "LITTLE_ENDIAN")
-set(CMAKE_CXX_LIBRARY_ARCHITECTURE "")
-
-if(CMAKE_CXX_SIZEOF_DATA_PTR)
-  set(CMAKE_SIZEOF_VOID_P "${CMAKE_CXX_SIZEOF_DATA_PTR}")
-endif()
-
-if(CMAKE_CXX_COMPILER_ABI)
-  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_CXX_COMPILER_ABI}")
-endif()
-
-if(CMAKE_CXX_LIBRARY_ARCHITECTURE)
-  set(CMAKE_LIBRARY_ARCHITECTURE "")
-endif()
-
-set(CMAKE_CXX_CL_SHOWINCLUDES_PREFIX "")
-if(CMAKE_CXX_CL_SHOWINCLUDES_PREFIX)
-  set(CMAKE_CL_SHOWINCLUDES_PREFIX "${CMAKE_CXX_CL_SHOWINCLUDES_PREFIX}")
-endif()
-
-
-
-
-
-set(CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES "/usr/include/c++/14.2.1;/usr/include/c++/14.2.1/x86_64-pc-linux-gnu;/usr/include/c++/14.2.1/backward;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include")
-set(CMAKE_CXX_IMPLICIT_LINK_LIBRARIES "stdc++;m;gcc_s;gcc;c;gcc_s;gcc")
-set(CMAKE_CXX_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib")
-set(CMAKE_CXX_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "")
-set(CMAKE_CXX_COMPILER_CLANG_RESOURCE_DIR "")
-
-set(CMAKE_CXX_COMPILER_IMPORT_STD "")
-### Imported target for C++23 standard library
-set(CMAKE_CXX23_COMPILER_IMPORT_STD_NOT_FOUND_MESSAGE "Toolchain does not support discovering `import std` support")
-
-
-### Imported target for C++26 standard library
-set(CMAKE_CXX26_COMPILER_IMPORT_STD_NOT_FOUND_MESSAGE "Toolchain does not support discovering `import std` support")
-
-
-
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin b/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin
deleted file mode 100755
index 6f4e7c0e50420bf30feec79c4ad403f23f067405..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 15448
zcmeHOU2Ggz6~4Q68mGkBO&SNc3C*aWsFCo*b{)$NO1t)Y?ODk`A>9a2lupOqu{~nF
zYj($A7ic2_D61&Q2nl$gQY55Gya7T~eQ7rs_2;Rn5K@JBFomMDN=XnD8Hl``GjqQ6
zc(N`PAYMAhnmKd6bH01;ocX&ubNqB>Y$P6wDM*WYM6snMeIzB0&mNZzQYkf{+G%}A
z9aMLb-Rfb!Kjka(`tnA6t8Np#g*5Xzd83Iw<ipg5FBl<f=4~hIJA4nclKo(w=Moz@
z^fS@{H1I}$n)Ddbt-^y2@;En1-RC7A*{YS~rA;(=Y%)(1o+do#E7Bh{^2s^jWkB*7
z)+zF_q`b9KVcwGP!g^TZp}7y1$KG=D|4DzRgtwx3&8V=(@rFi!pC%sX<%0?i^J(dC
zyW?<6@(C@bI#zI|`umO*@?8a|xVY4{G|=DG-=|kfdapMG9#=Old`^u{oKf-fs>T@j
zF%{cl$Hk@)PdIizEu41d|Ng13Tp4}k>1XGU{PsJO?{vn8Uwg62F}xq#CdaTa#tVdf
zSb%*H&76Hr0@H+PO>lD?ytoa158)3qX-AnRWp>)ExK`OU=Pjp5$n=tB&NxM@;5=z7
zc5|Nl)#zAuC~fxYz54OS_CtNj%;v_;yj`|uor-IhbK~hksc7e{se(;y&CZvK(z@w~
zHVssC0n#y|KmWv!k<H`9d9!$*vx|?;Ck6Z2x4%oLU!3lIzTkSsb(Gxe<DGK70<TGf
zZ7JUm9CqzdALnzMj|t?J0M7RW$h812m#pV{BY+3bkF@|Uw?;G-=_mtH2BHi^8Hh3v
zWgyBxlz|Un2L6(`{~yMM8*Rp=9aoPjWqhON#_QLN3%_hz^|HbKo_Dj=*B>{kZyFc=
zaO+eq(^Knt)wq1}Hxy9s_%gBnI-@5Jf8C2G{CRHY@{XUfdU)OKpr#*}rgzoX5{J)o
z;HqefuX^#vzsBn5hEcs`T>aCd#?|!}BleQ<`i8ro8t9S++UjdFiNnL2d>-HVlNoZW
z#fQ!q7f#;In@065x81mO@(3CAj&=GieSNxKufMe85CO4stDECpo!Q(@98M{2@9kNN
zJwt6&zk0){F0Q?txy?hql(}Ji-?-fI_8z4YKW|MYUZ}+~w*}qLyL^*9&$Y%A&xJkj
zHS=`TLoMAtx7s)!jU&KaM-pWq%0QHXC<9Rjq6|bCh%yjmAj&|LfhYq}2L8JY@OQ8G
zlkCLE<cSJ>mn+Sf`31LpwtL`QFn%ICIWl#^T{i7<$<CiGXNSzuiA;8QVo-T;9)D`t
zwarqQzS*4}%jR-p88b66oE@B?2+wa#IcKR3feEpLEuZ3VzdWjyoAo+>Z>!#_*H4jV
z;cuoau_sTf*itffaQDu(75Z?-IP*>s=LiQ3@ASUBG1f;*54G_n#s~K#zZp-r-xV(t
zlYvO03`7}-G7x1T%0QHXC<9Rjq6|bCh%)fu%mC^bQMZViM6Qiw+3l-Fp=7(*D^mY>
zuh^)MJSaAPYTYL`>LmI184LXHZPZI_*QB@+HH!;U)W~&`ENkMw+c(uk(H{}rDY`>6
z)K1wLkcQE3O>ipu^aT8W*8TAi=!I^G-6nkcQtXWvd7_`0p1m&P{kzz~T21NV|Ef?w
zzFnuNM;%S4PiPNPweeA{r;jRcd$iu}-oEaEZYsfT?s~YVd%H#n=e)G4Ki9({d|YB`
zk4kC2=Y9#`witgxa8YVP@bd!Dm-B`+YyUIkjj4N7c)y?UScyj6IU1>W@g3^A)XM^|
z(nhm7>1PSo5ERgFdiVjQQUQ=Qe?iM$+AmG>ah#XGA~UHDsAS5=vF756eergM>k9Z9
zZE$?J{dWo1XbH=00`|raC>&q-cg6hifF!4@>Lfg=KB_uXi1hUzN$sPnU-RCoDCNCl
zA?#xkA0Gcv!a4q4xi5I{UMOBCoW~Q6KS8)g{;=c-e;^E!T_Sv6oUV2mPa`BfZhhWP
zr%Uq-PQfk@4rTRe<rHU1=H^Q%bIO@D?PA`sig&mQj_VfeEna#%rOe^aO$?4_(^Ozi
z*M^xf%#qWB;~CQ!KCR5rvB{yqF>`Wc<grZ7%nc6F3$8os+*2rL|2HM<-e3c7+>~kO
zE!R?9Ax{G_+3*Y8@2GY+^Ocf0XBG2Y37?&$sJv4&7b|w28Y$AsoT^lWE2Z~TJ<l)W
z%=fF6-&&yG*bgqtH)%{R9o5S6ylYL7cFVq=!<JK|8vO;O7fY_K&lVT;g>q@ZF1yPC
zXll`+f3$G&0?|S1a;;hAh0j@)Ii=^9i`0d$-LmibqFt^yrQ#ODBwyJsSWHm5H#pt3
zmt3WL+0)A<FPFMKXU>$ZdE1=J69bmdFs*XgqTw+E+ti#j?@Uu)C2EUS`a*#={KhD$
zN}n#x&)Y@H#s5b5xk;yZ<LzvxJV2oF+(d628<dZe!Oyz5fCIvZP6-Z$=OFBU+6eNO
zgb)1*1d7J}18_FP|AFwKH3W(d^ZEY$H+ptr{Fo0wWB)N92#?<)KF<Zf$9w^LMf&A^
z<lKRe=e|Q24;g&SKcFv?FDT*se}SAlHvk{=0cgylFn+{AKSg|=Yrw{Q1Dc<cEaCC{
zs8W|{gL4W#<~z_e2}J+l{r?{Md7t2K+-K!}i+P<iv*mx17<-16ARo^S=!H<i!ng4s
zhWL06LSx>^eX)ekpC1v%U10x}Mh1)Kt<|@D)mRJMuzx~ZLH>#aK;!%aA>99qA^wkr
z51j*1H1ZGlRodV=j$Aeh^J)AaTR0vz^skAV2=FoA?$ik+L7Z=G+Q5HD4nFqiAM+^u
zU*Z)`4hf%sEa2fdzC##?fRF!ksvYBKr5^NEV+}s^P4Wc!n3r7_KCV+V03P&uh_6x-
zDHjgL8Ro;@pbc&d<Hvj@DSY&Ucu5CL)j|Mc65hbU=lg3=zz^!ixf=*Hq``~g<lj@f
mXu)`p7sfF509{?{^{qv8B+igYbJgbj41Y``*&QN;O!Y4&j*!#<

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin b/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin
deleted file mode 100755
index 66c99e8612cf056b64d38a16057ec51886004a16..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 15464
zcmeHOU2Ggz6~4Q68VBO6Q{pzQLo+I<Y7{*Fsbe{*OxHha&r1FYsUrd*OxL?(d&GKo
znH?9q64b&4VTDvKLQo0%fOzUt0U-(xz(z(bc}pIUBE*BKsBo)5jA$V(k(YC3&bJwl
z*5yy)p_*&WeD{3koO|z_JL9=KbLQ#P*hoAUQz#AU<BBD%#b=VDm^&dAf~4wG&9pzF
z+SFYnH+r0}Px?Swzg&;+#3tbz2-)v2SL)yqpQb+if)O&Z-)=?Y0Z{=eIS%&Q!wQkZ
z_=0o*gud3F#?DkUZ(qYk@dF0^cqkj~zWql3PVAJp^a;X`MfTegzb)|tUX}iUh$qK{
zw?2ty7?Y&qlJxdUh5Z)AFO0)t59B_$JpQ_y`)~R?Eq-g7*Nh4y<{OCqK0$smwZ7xO
z*khW{NPoM{gC_9@N_bUA-k$F5>B#5W^LAljv3;?xx4pMVFBkQ0uV)@tCvALAjZU0Z
z@nuzE4*oF}+abqACKIo)?IGGY?Cf9s-8*f^zj@7Q{@%hffB*UA+=~NNoNf3xxJ|a<
z!W?fXtiuNG-@$Wa^k5ys5#sKy!}B<_Iz0DXkN?;%yfV$%`C`E=yBWtdO=YI1#?74N
zShIH7wVbK(p?tAmO=YI@manU?F==|T(#U+qE>N@C#f&*)7czPKDNB*M?B=q^kMoT6
zvN&I>&1T7yr7q^PK0i8^9vm{e^+$RXs@=NxKQB&mM6*eMTw*G&o+ZTj_2cKhMW<zh
zdS1AN`|W*-Y`)LNRB+wndTTl8^P6&AgRe+~O-Wx59&+U|pXY19ABivjI>5`R>?y7W
zc)7Ga{(689o<|!2-upl4Hy`bz2t*NxA`nF&ia->BC<0Lg-e(c`YvO@-jg=cs#>G8X
zI+QZLQgP$etH#Q&n%2D|WqsG5(yP}#YplLzto&i?^i-;=(sjkS)c;#DsJ5<<*IP4s
z;^;G;J@G%|b}sGt5yQz_ZYwoCBTetCZX}K_v*EfR*{^!`C%(*ZY};7fGA{r5G2`;B
z1|#;0ac$c@L=Bvf2AZlHGl`?acl>#L%l#=*tA$6-8Y}&8>QpsWUw500i~SD~Uv0fk
z)MmC?t-iA72obRh>vzVxK69s@IGR-4-W#)IdzRW*{o)N{bz$Sx)NLN}#ncVsdE-*+
z8wZq1{G_oZ@rz0<bz9g&e8@Lh^KxT6@p4%6c0EmNHPq7W3+uJ{sLcR(9hE2oQ3Rq0
zL=lK05Je!0Koo%}0#O8_2t*NxBJjUOfZu1mS4mHdOr9#!E4AW`nJc-@`OdxzLHmjH
z<jC|XcgeJzqLn-EqzBE>iBx)cVnBIzp8xccYnerdUh|zFOHWOWrOedCaC%^ZEIfT?
z+CEQt2<#ARYj~93{qm^RZdR*(gsWTC>S;nQ{LYk1?5Q&<w%8JD+rPJIjb4Z`&wi)L
z=OH#2-s`<lW3Gp`E^6Zo%nuxB`D%Qq`L4J_o=ij~ia->BC<0Lgq6kD0h$0Y0Ac{Z~
zfhYp+j|d>&5c!439h{ZJgZyMjUJl96io9PC36RYquSs6xeIg_8u}x(B)Vg0}<UjK7
zGcM4-y<IJ`T#=+j<RX?NS&{P}xon931HPzU68xaxVZl~Gz+S05Aq}J7itv=Y=@t0@
zqw0@`NY8Xz<WBLYH^ts~5l8x&>B*Yt-w`>OgDGA7Ujg~!yLE~@)6t=!Q`*CnZG24Y
z>e0LPF0H$>yQj0S^Mu+(b+W5-w?>KQxHPK2RKq5Gp2XAvrD?tf^VA`HQuqgawVD+E
z3E>5lBmA-u^hUi_>h=4yr%lxI&SCrws>IZXR5(uG@%UD?DfzLm{~=Xc)IF*t3C73c
zF{L!(Rfzv7sSncelF}>4y?vFW2YqVC{xy>BR{Pa`a$R}PE{OXhZ3pA`D9jg}-eUWB
zv%+-<{$1uF1h9j~$?a>BckDegA^p9~$LT5(9xfjyp8E|S?=j*z4&meN_4s?$;Urq{
z@loN!?Tiwy?KJhI>@K{s3$KR8GoQ1D&Yc@7&X?@G<qQm_^=zr6%ukPX_1cA*q8WIa
z#ca3F-g!o4PTRAlRmj;HN-HP*NzW^w&)cq>w*n@8o&`O{qBL~6bj*}tj+_}7PnpK>
z8D$QCYGPnKJ*3RhvB|-KF>`Wc<nh#$IW;gy55kmb<uY!Da@{8>ojqq4%!RU*3#GFs
zgDL5f?w%_b&ACh=$9eLU_Rd|0a^h=Vl+$jKg-a%sU(e6pIPu=(e*F}B8bpEnoGzC^
zyjNO&oeciES^7#ZFU`A|X+qcWaSk=RK-vB!r5B2>rOy@?^paC7S&q9Dpr#jW`u@Vs
z2}Lv6?q+6{XFiuH&nZ2(RG=<=bRA#wq~(<DVqu41lFqU68Fo;*7Yp6B7G0%#q0^nB
zHwn5mXU;g8dCQ#3kq0E-!^}8NhK9!;s8e&9c{@ve6{#)S>7_hX{KhDnO3xPO=dFTU
z=gj`kD87%<DPMb9dsuELK-@>sD%%FjM@Zm%UtGvO@dqY_2jIR4xtA(I|3&c!eiVj+
z`2Pkv9rFLK_yaW<3WohZN&MgFUW)N!eE`JqV|@@Fe}?>dZ2*6)AAoDpFCQbv4*pmN
z*u?RW;g9tQ@Fmg(OE~_YCnc{H;E(kI5bG+8A9lbmkw33JAY=VeL+Ly`evIi7RXC>b
z$NC3Y5kvGJKK^f$o{tIo+WkT96Ika-GdsRfV(tang8sPg0862Og>FCI_cTF&+~<H;
zhwj$@i_$-iUuj|~i1n?oH8o_u-*f-)U(<XI5a*xI?)*lJxnI&2^#6gztWv-!U##sB
ze-Kxw!fPA3Y--;X;k&l5J!If-$Tt!2$NGCyzB7a!nRo><@b|>>+@pW2lklA)zDMNq
zj|==Tk8cvk#}9ve&s5<BAC-rFsO{koyh)m%Kh|TL;*aYT4Zsh0E99?|V%g~<#wl!V
z{E)Y)!fj#vSiiK0Kl*_^k2P2th+t04YbyBj|JPuFe-Lr*1?>!J@N1&v-&g#b2;)Iq
j_7R7%2mP;h`_k9ZktjnVtzGN;e}-SKQQ04I2#M;S&VRIx

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
deleted file mode 100644
index b0b76c86f9e..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
+++ /dev/null
@@ -1,15 +0,0 @@
-set(CMAKE_HOST_SYSTEM "Linux-6.10.2-273-tkg-eevdf")
-set(CMAKE_HOST_SYSTEM_NAME "Linux")
-set(CMAKE_HOST_SYSTEM_VERSION "6.10.2-273-tkg-eevdf")
-set(CMAKE_HOST_SYSTEM_PROCESSOR "x86_64")
-
-
-
-set(CMAKE_SYSTEM "Linux-6.10.2-273-tkg-eevdf")
-set(CMAKE_SYSTEM_NAME "Linux")
-set(CMAKE_SYSTEM_VERSION "6.10.2-273-tkg-eevdf")
-set(CMAKE_SYSTEM_PROCESSOR "x86_64")
-
-set(CMAKE_CROSSCOMPILING "FALSE")
-
-set(CMAKE_SYSTEM_LOADED 1)
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
deleted file mode 100644
index 8d8bb038bb3..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
+++ /dev/null
@@ -1,904 +0,0 @@
-#ifdef __cplusplus
-# error "A C++ compiler has been selected for C."
-#endif
-
-#if defined(__18CXX)
-# define ID_VOID_MAIN
-#endif
-#if defined(__CLASSIC_C__)
-/* cv-qualifiers did not exist in K&R C */
-# define const
-# define volatile
-#endif
-
-#if !defined(__has_include)
-/* If the compiler does not have __has_include, pretend the answer is
-   always no.  */
-#  define __has_include(x) 0
-#endif
-
-
-/* Version number components: V=Version, R=Revision, P=Patch
-   Version date components:   YYYY=Year, MM=Month,   DD=Day  */
-
-#if defined(__INTEL_COMPILER) || defined(__ICC)
-# define COMPILER_ID "Intel"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# if defined(__GNUC__)
-#  define SIMULATE_ID "GNU"
-# endif
-  /* __INTEL_COMPILER = VRP prior to 2021, and then VVVV for 2021 and later,
-     except that a few beta releases use the old format with V=2021.  */
-# if __INTEL_COMPILER < 2021 || __INTEL_COMPILER == 202110 || __INTEL_COMPILER == 202111
-#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100)
-#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10)
-#  if defined(__INTEL_COMPILER_UPDATE)
-#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER_UPDATE)
-#  else
-#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER   % 10)
-#  endif
-# else
-#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER)
-#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER_UPDATE)
-   /* The third version component from --version is an update index,
-      but no macro is provided for it.  */
-#  define COMPILER_VERSION_PATCH DEC(0)
-# endif
-# if defined(__INTEL_COMPILER_BUILD_DATE)
-   /* __INTEL_COMPILER_BUILD_DATE = YYYYMMDD */
-#  define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE)
-# endif
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-# if defined(__GNUC__)
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-# elif defined(__GNUG__)
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
-# endif
-# if defined(__GNUC_MINOR__)
-#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-# endif
-# if defined(__GNUC_PATCHLEVEL__)
-#  define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-# endif
-
-#elif (defined(__clang__) && defined(__INTEL_CLANG_COMPILER)) || defined(__INTEL_LLVM_COMPILER)
-# define COMPILER_ID "IntelLLVM"
-#if defined(_MSC_VER)
-# define SIMULATE_ID "MSVC"
-#endif
-#if defined(__GNUC__)
-# define SIMULATE_ID "GNU"
-#endif
-/* __INTEL_LLVM_COMPILER = VVVVRP prior to 2021.2.0, VVVVRRPP for 2021.2.0 and
- * later.  Look for 6 digit vs. 8 digit version number to decide encoding.
- * VVVV is no smaller than the current year when a version is released.
- */
-#if __INTEL_LLVM_COMPILER < 1000000L
-# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/100)
-# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER    % 10)
-#else
-# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/10000)
-# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/100 % 100)
-# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER     % 100)
-#endif
-#if defined(_MSC_VER)
-  /* _MSC_VER = VVRR */
-# define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-# define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-#endif
-#if defined(__GNUC__)
-# define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-#elif defined(__GNUG__)
-# define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
-#endif
-#if defined(__GNUC_MINOR__)
-# define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-#endif
-#if defined(__GNUC_PATCHLEVEL__)
-# define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-#endif
-
-#elif defined(__PATHCC__)
-# define COMPILER_ID "PathScale"
-# define COMPILER_VERSION_MAJOR DEC(__PATHCC__)
-# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__)
-# if defined(__PATHCC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__)
-# endif
-
-#elif defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__)
-# define COMPILER_ID "Embarcadero"
-# define COMPILER_VERSION_MAJOR HEX(__CODEGEARC_VERSION__>>24 & 0x00FF)
-# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF)
-# define COMPILER_VERSION_PATCH DEC(__CODEGEARC_VERSION__     & 0xFFFF)
-
-#elif defined(__BORLANDC__)
-# define COMPILER_ID "Borland"
-  /* __BORLANDC__ = 0xVRR */
-# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8)
-# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF)
-
-#elif defined(__WATCOMC__) && __WATCOMC__ < 1200
-# define COMPILER_ID "Watcom"
-   /* __WATCOMC__ = VVRR */
-# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100)
-# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
-# if (__WATCOMC__ % 10) > 0
-#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
-# endif
-
-#elif defined(__WATCOMC__)
-# define COMPILER_ID "OpenWatcom"
-   /* __WATCOMC__ = VVRP + 1100 */
-# define COMPILER_VERSION_MAJOR DEC((__WATCOMC__ - 1100) / 100)
-# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
-# if (__WATCOMC__ % 10) > 0
-#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
-# endif
-
-#elif defined(__SUNPRO_C)
-# define COMPILER_ID "SunPro"
-# if __SUNPRO_C >= 0x5100
-   /* __SUNPRO_C = 0xVRRP */
-#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>12)
-#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xFF)
-#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_C    & 0xF)
-# else
-   /* __SUNPRO_CC = 0xVRP */
-#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>8)
-#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xF)
-#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_C    & 0xF)
-# endif
-
-#elif defined(__HP_cc)
-# define COMPILER_ID "HP"
-  /* __HP_cc = VVRRPP */
-# define COMPILER_VERSION_MAJOR DEC(__HP_cc/10000)
-# define COMPILER_VERSION_MINOR DEC(__HP_cc/100 % 100)
-# define COMPILER_VERSION_PATCH DEC(__HP_cc     % 100)
-
-#elif defined(__DECC)
-# define COMPILER_ID "Compaq"
-  /* __DECC_VER = VVRRTPPPP */
-# define COMPILER_VERSION_MAJOR DEC(__DECC_VER/10000000)
-# define COMPILER_VERSION_MINOR DEC(__DECC_VER/100000  % 100)
-# define COMPILER_VERSION_PATCH DEC(__DECC_VER         % 10000)
-
-#elif defined(__IBMC__) && defined(__COMPILER_VER__)
-# define COMPILER_ID "zOS"
-  /* __IBMC__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
-
-#elif defined(__open_xl__) && defined(__clang__)
-# define COMPILER_ID "IBMClang"
-# define COMPILER_VERSION_MAJOR DEC(__open_xl_version__)
-# define COMPILER_VERSION_MINOR DEC(__open_xl_release__)
-# define COMPILER_VERSION_PATCH DEC(__open_xl_modification__)
-# define COMPILER_VERSION_TWEAK DEC(__open_xl_ptf_fix_level__)
-
-
-#elif defined(__ibmxl__) && defined(__clang__)
-# define COMPILER_ID "XLClang"
-# define COMPILER_VERSION_MAJOR DEC(__ibmxl_version__)
-# define COMPILER_VERSION_MINOR DEC(__ibmxl_release__)
-# define COMPILER_VERSION_PATCH DEC(__ibmxl_modification__)
-# define COMPILER_VERSION_TWEAK DEC(__ibmxl_ptf_fix_level__)
-
-
-#elif defined(__IBMC__) && !defined(__COMPILER_VER__) && __IBMC__ >= 800
-# define COMPILER_ID "XL"
-  /* __IBMC__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
-
-#elif defined(__IBMC__) && !defined(__COMPILER_VER__) && __IBMC__ < 800
-# define COMPILER_ID "VisualAge"
-  /* __IBMC__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
-
-#elif defined(__NVCOMPILER)
-# define COMPILER_ID "NVHPC"
-# define COMPILER_VERSION_MAJOR DEC(__NVCOMPILER_MAJOR__)
-# define COMPILER_VERSION_MINOR DEC(__NVCOMPILER_MINOR__)
-# if defined(__NVCOMPILER_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__NVCOMPILER_PATCHLEVEL__)
-# endif
-
-#elif defined(__PGI)
-# define COMPILER_ID "PGI"
-# define COMPILER_VERSION_MAJOR DEC(__PGIC__)
-# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__)
-# if defined(__PGIC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__)
-# endif
-
-#elif defined(__clang__) && defined(__cray__)
-# define COMPILER_ID "CrayClang"
-# define COMPILER_VERSION_MAJOR DEC(__cray_major__)
-# define COMPILER_VERSION_MINOR DEC(__cray_minor__)
-# define COMPILER_VERSION_PATCH DEC(__cray_patchlevel__)
-# define COMPILER_VERSION_INTERNAL_STR __clang_version__
-
-
-#elif defined(_CRAYC)
-# define COMPILER_ID "Cray"
-# define COMPILER_VERSION_MAJOR DEC(_RELEASE_MAJOR)
-# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR)
-
-#elif defined(__TI_COMPILER_VERSION__)
-# define COMPILER_ID "TI"
-  /* __TI_COMPILER_VERSION__ = VVVRRRPPP */
-# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000)
-# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000   % 1000)
-# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__        % 1000)
-
-#elif defined(__CLANG_FUJITSU)
-# define COMPILER_ID "FujitsuClang"
-# define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
-# define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
-# define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
-# define COMPILER_VERSION_INTERNAL_STR __clang_version__
-
-
-#elif defined(__FUJITSU)
-# define COMPILER_ID "Fujitsu"
-# if defined(__FCC_version__)
-#   define COMPILER_VERSION __FCC_version__
-# elif defined(__FCC_major__)
-#   define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
-#   define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
-#   define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
-# endif
-# if defined(__fcc_version)
-#   define COMPILER_VERSION_INTERNAL DEC(__fcc_version)
-# elif defined(__FCC_VERSION)
-#   define COMPILER_VERSION_INTERNAL DEC(__FCC_VERSION)
-# endif
-
-
-#elif defined(__ghs__)
-# define COMPILER_ID "GHS"
-/* __GHS_VERSION_NUMBER = VVVVRP */
-# ifdef __GHS_VERSION_NUMBER
-# define COMPILER_VERSION_MAJOR DEC(__GHS_VERSION_NUMBER / 100)
-# define COMPILER_VERSION_MINOR DEC(__GHS_VERSION_NUMBER / 10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__GHS_VERSION_NUMBER      % 10)
-# endif
-
-#elif defined(__TASKING__)
-# define COMPILER_ID "Tasking"
-  # define COMPILER_VERSION_MAJOR DEC(__VERSION__/1000)
-  # define COMPILER_VERSION_MINOR DEC(__VERSION__ % 100)
-# define COMPILER_VERSION_INTERNAL DEC(__VERSION__)
-
-#elif defined(__ORANGEC__)
-# define COMPILER_ID "OrangeC"
-# define COMPILER_VERSION_MAJOR DEC(__ORANGEC_MAJOR__)
-# define COMPILER_VERSION_MINOR DEC(__ORANGEC_MINOR__)
-# define COMPILER_VERSION_PATCH DEC(__ORANGEC_PATCHLEVEL__)
-
-#elif defined(__TINYC__)
-# define COMPILER_ID "TinyCC"
-
-#elif defined(__BCC__)
-# define COMPILER_ID "Bruce"
-
-#elif defined(__SCO_VERSION__)
-# define COMPILER_ID "SCO"
-
-#elif defined(__ARMCC_VERSION) && !defined(__clang__)
-# define COMPILER_ID "ARMCC"
-#if __ARMCC_VERSION >= 1000000
-  /* __ARMCC_VERSION = VRRPPPP */
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/1000000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 100)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION     % 10000)
-#else
-  /* __ARMCC_VERSION = VRPPPP */
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/100000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 10)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION    % 10000)
-#endif
-
-
-#elif defined(__clang__) && defined(__apple_build_version__)
-# define COMPILER_ID "AppleClang"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
-# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
-# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-# define COMPILER_VERSION_TWEAK DEC(__apple_build_version__)
-
-#elif defined(__clang__) && defined(__ARMCOMPILER_VERSION)
-# define COMPILER_ID "ARMClang"
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCOMPILER_VERSION/1000000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCOMPILER_VERSION/10000 % 100)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCOMPILER_VERSION/100   % 100)
-# define COMPILER_VERSION_INTERNAL DEC(__ARMCOMPILER_VERSION)
-
-#elif defined(__clang__) && defined(__ti__)
-# define COMPILER_ID "TIClang"
-  # define COMPILER_VERSION_MAJOR DEC(__ti_major__)
-  # define COMPILER_VERSION_MINOR DEC(__ti_minor__)
-  # define COMPILER_VERSION_PATCH DEC(__ti_patchlevel__)
-# define COMPILER_VERSION_INTERNAL DEC(__ti_version__)
-
-#elif defined(__clang__)
-# define COMPILER_ID "Clang"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
-# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
-# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-
-#elif defined(__LCC__) && (defined(__GNUC__) || defined(__GNUG__) || defined(__MCST__))
-# define COMPILER_ID "LCC"
-# define COMPILER_VERSION_MAJOR DEC(__LCC__ / 100)
-# define COMPILER_VERSION_MINOR DEC(__LCC__ % 100)
-# if defined(__LCC_MINOR__)
-#  define COMPILER_VERSION_PATCH DEC(__LCC_MINOR__)
-# endif
-# if defined(__GNUC__) && defined(__GNUC_MINOR__)
-#  define SIMULATE_ID "GNU"
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-#  if defined(__GNUC_PATCHLEVEL__)
-#   define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-#  endif
-# endif
-
-#elif defined(__GNUC__)
-# define COMPILER_ID "GNU"
-# define COMPILER_VERSION_MAJOR DEC(__GNUC__)
-# if defined(__GNUC_MINOR__)
-#  define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__)
-# endif
-# if defined(__GNUC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-# endif
-
-#elif defined(_MSC_VER)
-# define COMPILER_ID "MSVC"
-  /* _MSC_VER = VVRR */
-# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100)
-# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100)
-# if defined(_MSC_FULL_VER)
-#  if _MSC_VER >= 1400
-    /* _MSC_FULL_VER = VVRRPPPPP */
-#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000)
-#  else
-    /* _MSC_FULL_VER = VVRRPPPP */
-#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000)
-#  endif
-# endif
-# if defined(_MSC_BUILD)
-#  define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD)
-# endif
-
-#elif defined(_ADI_COMPILER)
-# define COMPILER_ID "ADSP"
-#if defined(__VERSIONNUM__)
-  /* __VERSIONNUM__ = 0xVVRRPPTT */
-#  define COMPILER_VERSION_MAJOR DEC(__VERSIONNUM__ >> 24 & 0xFF)
-#  define COMPILER_VERSION_MINOR DEC(__VERSIONNUM__ >> 16 & 0xFF)
-#  define COMPILER_VERSION_PATCH DEC(__VERSIONNUM__ >> 8 & 0xFF)
-#  define COMPILER_VERSION_TWEAK DEC(__VERSIONNUM__ & 0xFF)
-#endif
-
-#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
-# define COMPILER_ID "IAR"
-# if defined(__VER__) && defined(__ICCARM__)
-#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 1000000)
-#  define COMPILER_VERSION_MINOR DEC(((__VER__) / 1000) % 1000)
-#  define COMPILER_VERSION_PATCH DEC((__VER__) % 1000)
-#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
-# elif defined(__VER__) && (defined(__ICCAVR__) || defined(__ICCRX__) || defined(__ICCRH850__) || defined(__ICCRL78__) || defined(__ICC430__) || defined(__ICCRISCV__) || defined(__ICCV850__) || defined(__ICC8051__) || defined(__ICCSTM8__))
-#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 100)
-#  define COMPILER_VERSION_MINOR DEC((__VER__) - (((__VER__) / 100)*100))
-#  define COMPILER_VERSION_PATCH DEC(__SUBVERSION__)
-#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
-# endif
-
-#elif defined(__SDCC_VERSION_MAJOR) || defined(SDCC)
-# define COMPILER_ID "SDCC"
-# if defined(__SDCC_VERSION_MAJOR)
-#  define COMPILER_VERSION_MAJOR DEC(__SDCC_VERSION_MAJOR)
-#  define COMPILER_VERSION_MINOR DEC(__SDCC_VERSION_MINOR)
-#  define COMPILER_VERSION_PATCH DEC(__SDCC_VERSION_PATCH)
-# else
-  /* SDCC = VRP */
-#  define COMPILER_VERSION_MAJOR DEC(SDCC/100)
-#  define COMPILER_VERSION_MINOR DEC(SDCC/10 % 10)
-#  define COMPILER_VERSION_PATCH DEC(SDCC    % 10)
-# endif
-
-
-/* These compilers are either not known or too old to define an
-  identification macro.  Try to identify the platform and guess that
-  it is the native compiler.  */
-#elif defined(__hpux) || defined(__hpua)
-# define COMPILER_ID "HP"
-
-#else /* unknown compiler */
-# define COMPILER_ID ""
-#endif
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
-#ifdef SIMULATE_ID
-char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
-#endif
-
-#ifdef __QNXNTO__
-char const* qnxnto = "INFO" ":" "qnxnto[]";
-#endif
-
-#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
-char const *info_cray = "INFO" ":" "compiler_wrapper[CrayPrgEnv]";
-#endif
-
-#define STRINGIFY_HELPER(X) #X
-#define STRINGIFY(X) STRINGIFY_HELPER(X)
-
-/* Identify known platforms by name.  */
-#if defined(__linux) || defined(__linux__) || defined(linux)
-# define PLATFORM_ID "Linux"
-
-#elif defined(__MSYS__)
-# define PLATFORM_ID "MSYS"
-
-#elif defined(__CYGWIN__)
-# define PLATFORM_ID "Cygwin"
-
-#elif defined(__MINGW32__)
-# define PLATFORM_ID "MinGW"
-
-#elif defined(__APPLE__)
-# define PLATFORM_ID "Darwin"
-
-#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
-# define PLATFORM_ID "Windows"
-
-#elif defined(__FreeBSD__) || defined(__FreeBSD)
-# define PLATFORM_ID "FreeBSD"
-
-#elif defined(__NetBSD__) || defined(__NetBSD)
-# define PLATFORM_ID "NetBSD"
-
-#elif defined(__OpenBSD__) || defined(__OPENBSD)
-# define PLATFORM_ID "OpenBSD"
-
-#elif defined(__sun) || defined(sun)
-# define PLATFORM_ID "SunOS"
-
-#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
-# define PLATFORM_ID "AIX"
-
-#elif defined(__hpux) || defined(__hpux__)
-# define PLATFORM_ID "HP-UX"
-
-#elif defined(__HAIKU__)
-# define PLATFORM_ID "Haiku"
-
-#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
-# define PLATFORM_ID "BeOS"
-
-#elif defined(__QNX__) || defined(__QNXNTO__)
-# define PLATFORM_ID "QNX"
-
-#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
-# define PLATFORM_ID "Tru64"
-
-#elif defined(__riscos) || defined(__riscos__)
-# define PLATFORM_ID "RISCos"
-
-#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
-# define PLATFORM_ID "SINIX"
-
-#elif defined(__UNIX_SV__)
-# define PLATFORM_ID "UNIX_SV"
-
-#elif defined(__bsdos__)
-# define PLATFORM_ID "BSDOS"
-
-#elif defined(_MPRAS) || defined(MPRAS)
-# define PLATFORM_ID "MP-RAS"
-
-#elif defined(__osf) || defined(__osf__)
-# define PLATFORM_ID "OSF1"
-
-#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
-# define PLATFORM_ID "SCO_SV"
-
-#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
-# define PLATFORM_ID "ULTRIX"
-
-#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
-# define PLATFORM_ID "Xenix"
-
-#elif defined(__WATCOMC__)
-# if defined(__LINUX__)
-#  define PLATFORM_ID "Linux"
-
-# elif defined(__DOS__)
-#  define PLATFORM_ID "DOS"
-
-# elif defined(__OS2__)
-#  define PLATFORM_ID "OS2"
-
-# elif defined(__WINDOWS__)
-#  define PLATFORM_ID "Windows3x"
-
-# elif defined(__VXWORKS__)
-#  define PLATFORM_ID "VxWorks"
-
-# else /* unknown platform */
-#  define PLATFORM_ID
-# endif
-
-#elif defined(__INTEGRITY)
-# if defined(INT_178B)
-#  define PLATFORM_ID "Integrity178"
-
-# else /* regular Integrity */
-#  define PLATFORM_ID "Integrity"
-# endif
-
-# elif defined(_ADI_COMPILER)
-#  define PLATFORM_ID "ADSP"
-
-#else /* unknown platform */
-# define PLATFORM_ID
-
-#endif
-
-/* For windows compilers MSVC and Intel we can determine
-   the architecture of the compiler being used.  This is because
-   the compilers do not have flags that can change the architecture,
-   but rather depend on which compiler is being used
-*/
-#if defined(_WIN32) && defined(_MSC_VER)
-# if defined(_M_IA64)
-#  define ARCHITECTURE_ID "IA64"
-
-# elif defined(_M_ARM64EC)
-#  define ARCHITECTURE_ID "ARM64EC"
-
-# elif defined(_M_X64) || defined(_M_AMD64)
-#  define ARCHITECTURE_ID "x64"
-
-# elif defined(_M_IX86)
-#  define ARCHITECTURE_ID "X86"
-
-# elif defined(_M_ARM64)
-#  define ARCHITECTURE_ID "ARM64"
-
-# elif defined(_M_ARM)
-#  if _M_ARM == 4
-#   define ARCHITECTURE_ID "ARMV4I"
-#  elif _M_ARM == 5
-#   define ARCHITECTURE_ID "ARMV5I"
-#  else
-#   define ARCHITECTURE_ID "ARMV" STRINGIFY(_M_ARM)
-#  endif
-
-# elif defined(_M_MIPS)
-#  define ARCHITECTURE_ID "MIPS"
-
-# elif defined(_M_SH)
-#  define ARCHITECTURE_ID "SHx"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__WATCOMC__)
-# if defined(_M_I86)
-#  define ARCHITECTURE_ID "I86"
-
-# elif defined(_M_IX86)
-#  define ARCHITECTURE_ID "X86"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
-# if defined(__ICCARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__ICCRX__)
-#  define ARCHITECTURE_ID "RX"
-
-# elif defined(__ICCRH850__)
-#  define ARCHITECTURE_ID "RH850"
-
-# elif defined(__ICCRL78__)
-#  define ARCHITECTURE_ID "RL78"
-
-# elif defined(__ICCRISCV__)
-#  define ARCHITECTURE_ID "RISCV"
-
-# elif defined(__ICCAVR__)
-#  define ARCHITECTURE_ID "AVR"
-
-# elif defined(__ICC430__)
-#  define ARCHITECTURE_ID "MSP430"
-
-# elif defined(__ICCV850__)
-#  define ARCHITECTURE_ID "V850"
-
-# elif defined(__ICC8051__)
-#  define ARCHITECTURE_ID "8051"
-
-# elif defined(__ICCSTM8__)
-#  define ARCHITECTURE_ID "STM8"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__ghs__)
-# if defined(__PPC64__)
-#  define ARCHITECTURE_ID "PPC64"
-
-# elif defined(__ppc__)
-#  define ARCHITECTURE_ID "PPC"
-
-# elif defined(__ARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__x86_64__)
-#  define ARCHITECTURE_ID "x64"
-
-# elif defined(__i386__)
-#  define ARCHITECTURE_ID "X86"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__clang__) && defined(__ti__)
-# if defined(__ARM_ARCH)
-#  define ARCHITECTURE_ID "Arm"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__TI_COMPILER_VERSION__)
-# if defined(__TI_ARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__MSP430__)
-#  define ARCHITECTURE_ID "MSP430"
-
-# elif defined(__TMS320C28XX__)
-#  define ARCHITECTURE_ID "TMS320C28x"
-
-# elif defined(__TMS320C6X__) || defined(_TMS320C6X)
-#  define ARCHITECTURE_ID "TMS320C6x"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-# elif defined(__ADSPSHARC__)
-#  define ARCHITECTURE_ID "SHARC"
-
-# elif defined(__ADSPBLACKFIN__)
-#  define ARCHITECTURE_ID "Blackfin"
-
-#elif defined(__TASKING__)
-
-# if defined(__CTC__) || defined(__CPTC__)
-#  define ARCHITECTURE_ID "TriCore"
-
-# elif defined(__CMCS__)
-#  define ARCHITECTURE_ID "MCS"
-
-# elif defined(__CARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__CARC__)
-#  define ARCHITECTURE_ID "ARC"
-
-# elif defined(__C51__)
-#  define ARCHITECTURE_ID "8051"
-
-# elif defined(__CPCP__)
-#  define ARCHITECTURE_ID "PCP"
-
-# else
-#  define ARCHITECTURE_ID ""
-# endif
-
-#else
-#  define ARCHITECTURE_ID
-#endif
-
-/* Convert integer to decimal digit literals.  */
-#define DEC(n)                   \
-  ('0' + (((n) / 10000000)%10)), \
-  ('0' + (((n) / 1000000)%10)),  \
-  ('0' + (((n) / 100000)%10)),   \
-  ('0' + (((n) / 10000)%10)),    \
-  ('0' + (((n) / 1000)%10)),     \
-  ('0' + (((n) / 100)%10)),      \
-  ('0' + (((n) / 10)%10)),       \
-  ('0' +  ((n) % 10))
-
-/* Convert integer to hex digit literals.  */
-#define HEX(n)             \
-  ('0' + ((n)>>28 & 0xF)), \
-  ('0' + ((n)>>24 & 0xF)), \
-  ('0' + ((n)>>20 & 0xF)), \
-  ('0' + ((n)>>16 & 0xF)), \
-  ('0' + ((n)>>12 & 0xF)), \
-  ('0' + ((n)>>8  & 0xF)), \
-  ('0' + ((n)>>4  & 0xF)), \
-  ('0' + ((n)     & 0xF))
-
-/* Construct a string literal encoding the version number. */
-#ifdef COMPILER_VERSION
-char const* info_version = "INFO" ":" "compiler_version[" COMPILER_VERSION "]";
-
-/* Construct a string literal encoding the version number components. */
-#elif defined(COMPILER_VERSION_MAJOR)
-char const info_version[] = {
-  'I', 'N', 'F', 'O', ':',
-  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[',
-  COMPILER_VERSION_MAJOR,
-# ifdef COMPILER_VERSION_MINOR
-  '.', COMPILER_VERSION_MINOR,
-#  ifdef COMPILER_VERSION_PATCH
-   '.', COMPILER_VERSION_PATCH,
-#   ifdef COMPILER_VERSION_TWEAK
-    '.', COMPILER_VERSION_TWEAK,
-#   endif
-#  endif
-# endif
-  ']','\0'};
-#endif
-
-/* Construct a string literal encoding the internal version number. */
-#ifdef COMPILER_VERSION_INTERNAL
-char const info_version_internal[] = {
-  'I', 'N', 'F', 'O', ':',
-  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','_',
-  'i','n','t','e','r','n','a','l','[',
-  COMPILER_VERSION_INTERNAL,']','\0'};
-#elif defined(COMPILER_VERSION_INTERNAL_STR)
-char const* info_version_internal = "INFO" ":" "compiler_version_internal[" COMPILER_VERSION_INTERNAL_STR "]";
-#endif
-
-/* Construct a string literal encoding the version number components. */
-#ifdef SIMULATE_VERSION_MAJOR
-char const info_simulate_version[] = {
-  'I', 'N', 'F', 'O', ':',
-  's','i','m','u','l','a','t','e','_','v','e','r','s','i','o','n','[',
-  SIMULATE_VERSION_MAJOR,
-# ifdef SIMULATE_VERSION_MINOR
-  '.', SIMULATE_VERSION_MINOR,
-#  ifdef SIMULATE_VERSION_PATCH
-   '.', SIMULATE_VERSION_PATCH,
-#   ifdef SIMULATE_VERSION_TWEAK
-    '.', SIMULATE_VERSION_TWEAK,
-#   endif
-#  endif
-# endif
-  ']','\0'};
-#endif
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]";
-char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]";
-
-
-
-#define C_STD_99 199901L
-#define C_STD_11 201112L
-#define C_STD_17 201710L
-#define C_STD_23 202311L
-
-#ifdef __STDC_VERSION__
-#  define C_STD __STDC_VERSION__
-#endif
-
-#if !defined(__STDC__) && !defined(__clang__)
-# if defined(_MSC_VER) || defined(__ibmxl__) || defined(__IBMC__)
-#  define C_VERSION "90"
-# else
-#  define C_VERSION
-# endif
-#elif C_STD > C_STD_17
-# define C_VERSION "23"
-#elif C_STD > C_STD_11
-# define C_VERSION "17"
-#elif C_STD > C_STD_99
-# define C_VERSION "11"
-#elif C_STD >= C_STD_99
-# define C_VERSION "99"
-#else
-# define C_VERSION "90"
-#endif
-const char* info_language_standard_default =
-  "INFO" ":" "standard_default[" C_VERSION "]";
-
-const char* info_language_extensions_default = "INFO" ":" "extensions_default["
-#if (defined(__clang__) || defined(__GNUC__) || defined(__xlC__) ||           \
-     defined(__TI_COMPILER_VERSION__)) &&                                     \
-  !defined(__STRICT_ANSI__)
-  "ON"
-#else
-  "OFF"
-#endif
-"]";
-
-/*--------------------------------------------------------------------------*/
-
-#ifdef ID_VOID_MAIN
-void main() {}
-#else
-# if defined(__CLASSIC_C__)
-int main(argc, argv) int argc; char *argv[];
-# else
-int main(int argc, char* argv[])
-# endif
-{
-  int require = 0;
-  require += info_compiler[argc];
-  require += info_platform[argc];
-  require += info_arch[argc];
-#ifdef COMPILER_VERSION_MAJOR
-  require += info_version[argc];
-#endif
-#ifdef COMPILER_VERSION_INTERNAL
-  require += info_version_internal[argc];
-#endif
-#ifdef SIMULATE_ID
-  require += info_simulate[argc];
-#endif
-#ifdef SIMULATE_VERSION_MAJOR
-  require += info_simulate_version[argc];
-#endif
-#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
-  require += info_cray[argc];
-#endif
-  require += info_language_standard_default[argc];
-  require += info_language_extensions_default[argc];
-  (void)argv;
-  return require;
-}
-#endif
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
deleted file mode 100755
index 37746a787a5774e617e8abfcaacf5381d6be0900..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 15560
zcmeHOYit}>6~4R9!zpoh<JPX56f!g@awR-oJC513q+LJO8B2bY)Dc1^9gV$Xd&PR!
z?2f@HY8w$KF=<eF2#N$K5<-GXAXS2jAE-D=RT>FUf`n962)RHZpg@BP$c4zuIdjjq
z8Bf<O>YoZ}uH`xReD{3k-Z^(3cW2H#njIO6$6^YlLEWoZGm;v~NW%*Ur9vX3(yEEJ
zcc?vT8|hnoOt)vWpjKU8jBk{Uf;W(4UK>~H$U8JledvM_vSi+7Wq}7o1yad=FmEe2
zh#r=|kPaZxUhB_bG8Mz$*5n6;2N~q?P?Dy$Pu{yxwo6=6BEe&od4})|;X$60{vZ)g
zjtT##C7xlKp*AiVf2&lOw<Nr<929#<?t{w%uXwq))8GBV`?=w}QDKSshD3iKBA!gG
zCcecM(|lC=+iV`LNjxD%Rh@<WRBumbA=gpJ7Z;a0meRc)y**~7WOn;K^SDy<&&Sk}
zv12NJQmrrseoVzS=yB1>#4l`nEB$lWnSamYzklRU7rj4r9@_Wm%fET=Q^zVlSYsRB
z5BAA6To~hj6mG*mu>VCer@4;d0AWTQ+};E)Zi3%J_?>n9DBGsUPTLjFDSP(3lP?l7
zz2w+4`Jz+EKjbQI<~aANBO}B819rFBZ62)E5A-N|cw*Gfxn*}YU-8`X#OOewRCFht
zse((sX6H*q@osC=x`s;8jQD^0z>ks6<Hd2axI4dtXXpKb{qT!lrNb{yS3X^EKI1$}
z?$UUhoUg!F#9?Dbw*!Zs4B>{M?b<?kS#TqSe@^iB5dLMsQz88Og0I}C{KDrH9}6fi
z1n@XOl9vLwTq^w57Xx_kxLgh3{&hFtE2>5jh$0Y0Ac{Z~fhYn|1fmGMa}jtg@t%KM
zr>-_yXSSa2RLc77iWje5vQ9nMc)=eOw|D(@c=_^!*7EPHQ-8R2|3tQHrR$<~_V7z&
zP;L1XvHme*CiZ^Dw<r8%_H%aYODqnpc`fAnL2<pKx|-N~k_|72B>Sg*`-4xhxNF^7
zzGj{O+kMvgwFWEpymfiqyOkVth=a!J>P%wq;0->H@8scmYF3K}j#;M;-^5jG`4z9p
zI&*kGDb<!W`YnBBx>~J1zjcs+*zpTD#(QDrMm@1NquAe{XUX;$`B;AVs<phh`m^kH
z9<p_&<+tSNO!lhvq!qiAct$0jU5RC{6aLFh@Mr7c+QHeD^EWG%cxFqo=H<zH*5v(k
zJ^W1e`f-|~+WggKjE5SPC<0Lgq6kD0h$0Y0Ac{Z~fhYn|1fmE;5r`tNF#`PF>&?pW
z*wFah)1~=^e8DYG(p$*m8?86A+n;dDm3*l<net0lkEtuEZdAICE1$7YaJ-pPd46()
z->wSil&9w=rB3e$i#ey9qZfTM&SJrv?D~MTxJ#Z}<X$SZw(&84RIxn`_q5UQc#kGt
ztyX(Tj$W%)M@aI!RxYuJj;h#FGPY;u_QogZ#TVoJuDOlu_p`y^cK?kXW6Xb@@b56*
zcXRTw_(0RP_&H)S5S1tbQ3Rq0L=lK05Je!0Koo%}0#O8_2>gFX0C|kaTSRW)ow8dy
zv3ru&*d+Rj<UignI`Sj;h>o93yG2KyB=UUG{?GMliA`1{$q>1N3zA&O`HEatrTr$Y
zs?#FhC6a#!a%s_`w%snZv^Yk;Y1vUq`t%F<|EcQn5a^q(i{2=FdQ<F=7jdGWo4)QR
z?-J>C*lV}%*cSQYn+*W@sD_~}kZ+3oQsk2&fAq+}z}-eWJrB6cpr85OW|z^O>h4LU
zQ<SP(zv)m{YO~G>=lE?=f3MavsfY9L_L#awh4<^-zJo+9uN?lk?-(5oS0pbL_z+c^
zp#<bK)s29T>KA;xRjCXREgvP3RIMr<!XG2NIo_mjerRi@9vAztpRW^cz$hTUOZ8px
zR)u*&(~lTelu2M{1Ub0R`FN`e=Mn!(@Ni!6YlJ7&Z7P$YN}zm+>dk6r?R${@(zZr&
z7wvB{qXC>p+h`)$PdE<EgtMR9<vQU%Qz7bYg!6ud?e{TG{=<3A{e&C3%MII)5{_$B
zu;G)0H^=F!AlECjJxn;qEn{e;TN*y^<E_fbXaM`A21cEaxdQ|8By2cmPAhxxBV&D|
z!vmCcPA7t$wd|pzeWO|18a%4(BO~MeeIxex(9i?f345Zie<Vx!=;7q|407DxDzDwm
zIi909OFmCtSkX!DZ^(GJbCr@kM-R_98-944taACHy;yN`Dqox_*?97%wSrTeU36w$
z`;AZ4l<gLUgXe$L*;J(>9ZT*$rQh4xu|eAoISfC*dy`!JjUNEiLc(ePHtnycJ<GF2
zt?;8lrOe8SdC!?5>6NvdLoHvVPXiW|SuA<3Ia^#b7s{mtx9pt=KvRo(`o1Hd6R59$
zxWjX1m2W=hROXbKJ5i)AwDiil1>^9|M6s!@>=qm*DAOOa=}}0P=}(whF8R}Ex^wnS
z*_n6kxg0T|X@>2T%MJ~X8K{#xXFfko9hb-#ZOnxNRkSmj3T4vN%)3QTj^4K~_&!aC
ze(h;+o7`U^ai2yHY#S{5Na1^HT)?#OAv1zQ)XpmbdPxTPOTveIABZAxodY}^;(tT<
zkOmAzhWQ^R{9kmh#`v-RfW-c96MlI74&l7^03YiU$R~uy`^d2aAM1=fVLW8;vEG3^
zO>Myvj{nE0k=G*NWBmb%bsNSHJIF_f&ubg#Sl>Y6-W?u4#&nh{98>VIzN$$XF!~Sg
z|JR7iCTOo+ujRUpbtIYiB|LxMBs9o3ga`SpP{5>FyeakV5PwDPQ;=Baf)MWid&0;5
zD?=<rUKABVV5sV8s__uP-|V|M5W@ZcG{nDRXiLZm5Je*XfO&khitvv?#;|_JcXMHT
z=#alAP9ng^`o4{F7rDSrYd3V@FH-~0y_~kSbsfHgJSX$V#~&B)FpqyBj7`AD_f0FE
zY^_wg7PT$-kgrlpkdJlZ72)GNg#+*)c|8>5tBhEtv`mW%0Uq>qsxXG}V?C4>e%M~Z
z0lI1+fH5(z;o$T2HCVt8N*sGZy9IIhV`<z?jXX~n58|?eFpNFOZ$F^5ub?Ao45_ph
RtIz)lzl5W*Geiif>c5;{)EEE&

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
deleted file mode 100644
index da6c824af3a..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
+++ /dev/null
@@ -1,919 +0,0 @@
-/* This source file must have a .cpp extension so that all C++ compilers
-   recognize the extension without flags.  Borland does not know .cxx for
-   example.  */
-#ifndef __cplusplus
-# error "A C compiler has been selected for C++."
-#endif
-
-#if !defined(__has_include)
-/* If the compiler does not have __has_include, pretend the answer is
-   always no.  */
-#  define __has_include(x) 0
-#endif
-
-
-/* Version number components: V=Version, R=Revision, P=Patch
-   Version date components:   YYYY=Year, MM=Month,   DD=Day  */
-
-#if defined(__INTEL_COMPILER) || defined(__ICC)
-# define COMPILER_ID "Intel"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# if defined(__GNUC__)
-#  define SIMULATE_ID "GNU"
-# endif
-  /* __INTEL_COMPILER = VRP prior to 2021, and then VVVV for 2021 and later,
-     except that a few beta releases use the old format with V=2021.  */
-# if __INTEL_COMPILER < 2021 || __INTEL_COMPILER == 202110 || __INTEL_COMPILER == 202111
-#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100)
-#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10)
-#  if defined(__INTEL_COMPILER_UPDATE)
-#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER_UPDATE)
-#  else
-#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER   % 10)
-#  endif
-# else
-#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER)
-#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER_UPDATE)
-   /* The third version component from --version is an update index,
-      but no macro is provided for it.  */
-#  define COMPILER_VERSION_PATCH DEC(0)
-# endif
-# if defined(__INTEL_COMPILER_BUILD_DATE)
-   /* __INTEL_COMPILER_BUILD_DATE = YYYYMMDD */
-#  define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE)
-# endif
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-# if defined(__GNUC__)
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-# elif defined(__GNUG__)
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
-# endif
-# if defined(__GNUC_MINOR__)
-#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-# endif
-# if defined(__GNUC_PATCHLEVEL__)
-#  define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-# endif
-
-#elif (defined(__clang__) && defined(__INTEL_CLANG_COMPILER)) || defined(__INTEL_LLVM_COMPILER)
-# define COMPILER_ID "IntelLLVM"
-#if defined(_MSC_VER)
-# define SIMULATE_ID "MSVC"
-#endif
-#if defined(__GNUC__)
-# define SIMULATE_ID "GNU"
-#endif
-/* __INTEL_LLVM_COMPILER = VVVVRP prior to 2021.2.0, VVVVRRPP for 2021.2.0 and
- * later.  Look for 6 digit vs. 8 digit version number to decide encoding.
- * VVVV is no smaller than the current year when a version is released.
- */
-#if __INTEL_LLVM_COMPILER < 1000000L
-# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/100)
-# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER    % 10)
-#else
-# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/10000)
-# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/100 % 100)
-# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER     % 100)
-#endif
-#if defined(_MSC_VER)
-  /* _MSC_VER = VVRR */
-# define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-# define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-#endif
-#if defined(__GNUC__)
-# define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-#elif defined(__GNUG__)
-# define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
-#endif
-#if defined(__GNUC_MINOR__)
-# define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-#endif
-#if defined(__GNUC_PATCHLEVEL__)
-# define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-#endif
-
-#elif defined(__PATHCC__)
-# define COMPILER_ID "PathScale"
-# define COMPILER_VERSION_MAJOR DEC(__PATHCC__)
-# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__)
-# if defined(__PATHCC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__)
-# endif
-
-#elif defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__)
-# define COMPILER_ID "Embarcadero"
-# define COMPILER_VERSION_MAJOR HEX(__CODEGEARC_VERSION__>>24 & 0x00FF)
-# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF)
-# define COMPILER_VERSION_PATCH DEC(__CODEGEARC_VERSION__     & 0xFFFF)
-
-#elif defined(__BORLANDC__)
-# define COMPILER_ID "Borland"
-  /* __BORLANDC__ = 0xVRR */
-# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8)
-# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF)
-
-#elif defined(__WATCOMC__) && __WATCOMC__ < 1200
-# define COMPILER_ID "Watcom"
-   /* __WATCOMC__ = VVRR */
-# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100)
-# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
-# if (__WATCOMC__ % 10) > 0
-#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
-# endif
-
-#elif defined(__WATCOMC__)
-# define COMPILER_ID "OpenWatcom"
-   /* __WATCOMC__ = VVRP + 1100 */
-# define COMPILER_VERSION_MAJOR DEC((__WATCOMC__ - 1100) / 100)
-# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
-# if (__WATCOMC__ % 10) > 0
-#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
-# endif
-
-#elif defined(__SUNPRO_CC)
-# define COMPILER_ID "SunPro"
-# if __SUNPRO_CC >= 0x5100
-   /* __SUNPRO_CC = 0xVRRP */
-#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>12)
-#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xFF)
-#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC    & 0xF)
-# else
-   /* __SUNPRO_CC = 0xVRP */
-#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>8)
-#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xF)
-#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC    & 0xF)
-# endif
-
-#elif defined(__HP_aCC)
-# define COMPILER_ID "HP"
-  /* __HP_aCC = VVRRPP */
-# define COMPILER_VERSION_MAJOR DEC(__HP_aCC/10000)
-# define COMPILER_VERSION_MINOR DEC(__HP_aCC/100 % 100)
-# define COMPILER_VERSION_PATCH DEC(__HP_aCC     % 100)
-
-#elif defined(__DECCXX)
-# define COMPILER_ID "Compaq"
-  /* __DECCXX_VER = VVRRTPPPP */
-# define COMPILER_VERSION_MAJOR DEC(__DECCXX_VER/10000000)
-# define COMPILER_VERSION_MINOR DEC(__DECCXX_VER/100000  % 100)
-# define COMPILER_VERSION_PATCH DEC(__DECCXX_VER         % 10000)
-
-#elif defined(__IBMCPP__) && defined(__COMPILER_VER__)
-# define COMPILER_ID "zOS"
-  /* __IBMCPP__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
-
-#elif defined(__open_xl__) && defined(__clang__)
-# define COMPILER_ID "IBMClang"
-# define COMPILER_VERSION_MAJOR DEC(__open_xl_version__)
-# define COMPILER_VERSION_MINOR DEC(__open_xl_release__)
-# define COMPILER_VERSION_PATCH DEC(__open_xl_modification__)
-# define COMPILER_VERSION_TWEAK DEC(__open_xl_ptf_fix_level__)
-
-
-#elif defined(__ibmxl__) && defined(__clang__)
-# define COMPILER_ID "XLClang"
-# define COMPILER_VERSION_MAJOR DEC(__ibmxl_version__)
-# define COMPILER_VERSION_MINOR DEC(__ibmxl_release__)
-# define COMPILER_VERSION_PATCH DEC(__ibmxl_modification__)
-# define COMPILER_VERSION_TWEAK DEC(__ibmxl_ptf_fix_level__)
-
-
-#elif defined(__IBMCPP__) && !defined(__COMPILER_VER__) && __IBMCPP__ >= 800
-# define COMPILER_ID "XL"
-  /* __IBMCPP__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
-
-#elif defined(__IBMCPP__) && !defined(__COMPILER_VER__) && __IBMCPP__ < 800
-# define COMPILER_ID "VisualAge"
-  /* __IBMCPP__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
-
-#elif defined(__NVCOMPILER)
-# define COMPILER_ID "NVHPC"
-# define COMPILER_VERSION_MAJOR DEC(__NVCOMPILER_MAJOR__)
-# define COMPILER_VERSION_MINOR DEC(__NVCOMPILER_MINOR__)
-# if defined(__NVCOMPILER_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__NVCOMPILER_PATCHLEVEL__)
-# endif
-
-#elif defined(__PGI)
-# define COMPILER_ID "PGI"
-# define COMPILER_VERSION_MAJOR DEC(__PGIC__)
-# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__)
-# if defined(__PGIC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__)
-# endif
-
-#elif defined(__clang__) && defined(__cray__)
-# define COMPILER_ID "CrayClang"
-# define COMPILER_VERSION_MAJOR DEC(__cray_major__)
-# define COMPILER_VERSION_MINOR DEC(__cray_minor__)
-# define COMPILER_VERSION_PATCH DEC(__cray_patchlevel__)
-# define COMPILER_VERSION_INTERNAL_STR __clang_version__
-
-
-#elif defined(_CRAYC)
-# define COMPILER_ID "Cray"
-# define COMPILER_VERSION_MAJOR DEC(_RELEASE_MAJOR)
-# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR)
-
-#elif defined(__TI_COMPILER_VERSION__)
-# define COMPILER_ID "TI"
-  /* __TI_COMPILER_VERSION__ = VVVRRRPPP */
-# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000)
-# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000   % 1000)
-# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__        % 1000)
-
-#elif defined(__CLANG_FUJITSU)
-# define COMPILER_ID "FujitsuClang"
-# define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
-# define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
-# define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
-# define COMPILER_VERSION_INTERNAL_STR __clang_version__
-
-
-#elif defined(__FUJITSU)
-# define COMPILER_ID "Fujitsu"
-# if defined(__FCC_version__)
-#   define COMPILER_VERSION __FCC_version__
-# elif defined(__FCC_major__)
-#   define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
-#   define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
-#   define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
-# endif
-# if defined(__fcc_version)
-#   define COMPILER_VERSION_INTERNAL DEC(__fcc_version)
-# elif defined(__FCC_VERSION)
-#   define COMPILER_VERSION_INTERNAL DEC(__FCC_VERSION)
-# endif
-
-
-#elif defined(__ghs__)
-# define COMPILER_ID "GHS"
-/* __GHS_VERSION_NUMBER = VVVVRP */
-# ifdef __GHS_VERSION_NUMBER
-# define COMPILER_VERSION_MAJOR DEC(__GHS_VERSION_NUMBER / 100)
-# define COMPILER_VERSION_MINOR DEC(__GHS_VERSION_NUMBER / 10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__GHS_VERSION_NUMBER      % 10)
-# endif
-
-#elif defined(__TASKING__)
-# define COMPILER_ID "Tasking"
-  # define COMPILER_VERSION_MAJOR DEC(__VERSION__/1000)
-  # define COMPILER_VERSION_MINOR DEC(__VERSION__ % 100)
-# define COMPILER_VERSION_INTERNAL DEC(__VERSION__)
-
-#elif defined(__ORANGEC__)
-# define COMPILER_ID "OrangeC"
-# define COMPILER_VERSION_MAJOR DEC(__ORANGEC_MAJOR__)
-# define COMPILER_VERSION_MINOR DEC(__ORANGEC_MINOR__)
-# define COMPILER_VERSION_PATCH DEC(__ORANGEC_PATCHLEVEL__)
-
-#elif defined(__SCO_VERSION__)
-# define COMPILER_ID "SCO"
-
-#elif defined(__ARMCC_VERSION) && !defined(__clang__)
-# define COMPILER_ID "ARMCC"
-#if __ARMCC_VERSION >= 1000000
-  /* __ARMCC_VERSION = VRRPPPP */
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/1000000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 100)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION     % 10000)
-#else
-  /* __ARMCC_VERSION = VRPPPP */
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/100000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 10)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION    % 10000)
-#endif
-
-
-#elif defined(__clang__) && defined(__apple_build_version__)
-# define COMPILER_ID "AppleClang"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
-# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
-# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-# define COMPILER_VERSION_TWEAK DEC(__apple_build_version__)
-
-#elif defined(__clang__) && defined(__ARMCOMPILER_VERSION)
-# define COMPILER_ID "ARMClang"
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCOMPILER_VERSION/1000000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCOMPILER_VERSION/10000 % 100)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCOMPILER_VERSION/100   % 100)
-# define COMPILER_VERSION_INTERNAL DEC(__ARMCOMPILER_VERSION)
-
-#elif defined(__clang__) && defined(__ti__)
-# define COMPILER_ID "TIClang"
-  # define COMPILER_VERSION_MAJOR DEC(__ti_major__)
-  # define COMPILER_VERSION_MINOR DEC(__ti_minor__)
-  # define COMPILER_VERSION_PATCH DEC(__ti_patchlevel__)
-# define COMPILER_VERSION_INTERNAL DEC(__ti_version__)
-
-#elif defined(__clang__)
-# define COMPILER_ID "Clang"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
-# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
-# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-
-#elif defined(__LCC__) && (defined(__GNUC__) || defined(__GNUG__) || defined(__MCST__))
-# define COMPILER_ID "LCC"
-# define COMPILER_VERSION_MAJOR DEC(__LCC__ / 100)
-# define COMPILER_VERSION_MINOR DEC(__LCC__ % 100)
-# if defined(__LCC_MINOR__)
-#  define COMPILER_VERSION_PATCH DEC(__LCC_MINOR__)
-# endif
-# if defined(__GNUC__) && defined(__GNUC_MINOR__)
-#  define SIMULATE_ID "GNU"
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-#  if defined(__GNUC_PATCHLEVEL__)
-#   define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-#  endif
-# endif
-
-#elif defined(__GNUC__) || defined(__GNUG__)
-# define COMPILER_ID "GNU"
-# if defined(__GNUC__)
-#  define COMPILER_VERSION_MAJOR DEC(__GNUC__)
-# else
-#  define COMPILER_VERSION_MAJOR DEC(__GNUG__)
-# endif
-# if defined(__GNUC_MINOR__)
-#  define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__)
-# endif
-# if defined(__GNUC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-# endif
-
-#elif defined(_MSC_VER)
-# define COMPILER_ID "MSVC"
-  /* _MSC_VER = VVRR */
-# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100)
-# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100)
-# if defined(_MSC_FULL_VER)
-#  if _MSC_VER >= 1400
-    /* _MSC_FULL_VER = VVRRPPPPP */
-#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000)
-#  else
-    /* _MSC_FULL_VER = VVRRPPPP */
-#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000)
-#  endif
-# endif
-# if defined(_MSC_BUILD)
-#  define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD)
-# endif
-
-#elif defined(_ADI_COMPILER)
-# define COMPILER_ID "ADSP"
-#if defined(__VERSIONNUM__)
-  /* __VERSIONNUM__ = 0xVVRRPPTT */
-#  define COMPILER_VERSION_MAJOR DEC(__VERSIONNUM__ >> 24 & 0xFF)
-#  define COMPILER_VERSION_MINOR DEC(__VERSIONNUM__ >> 16 & 0xFF)
-#  define COMPILER_VERSION_PATCH DEC(__VERSIONNUM__ >> 8 & 0xFF)
-#  define COMPILER_VERSION_TWEAK DEC(__VERSIONNUM__ & 0xFF)
-#endif
-
-#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
-# define COMPILER_ID "IAR"
-# if defined(__VER__) && defined(__ICCARM__)
-#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 1000000)
-#  define COMPILER_VERSION_MINOR DEC(((__VER__) / 1000) % 1000)
-#  define COMPILER_VERSION_PATCH DEC((__VER__) % 1000)
-#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
-# elif defined(__VER__) && (defined(__ICCAVR__) || defined(__ICCRX__) || defined(__ICCRH850__) || defined(__ICCRL78__) || defined(__ICC430__) || defined(__ICCRISCV__) || defined(__ICCV850__) || defined(__ICC8051__) || defined(__ICCSTM8__))
-#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 100)
-#  define COMPILER_VERSION_MINOR DEC((__VER__) - (((__VER__) / 100)*100))
-#  define COMPILER_VERSION_PATCH DEC(__SUBVERSION__)
-#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
-# endif
-
-
-/* These compilers are either not known or too old to define an
-  identification macro.  Try to identify the platform and guess that
-  it is the native compiler.  */
-#elif defined(__hpux) || defined(__hpua)
-# define COMPILER_ID "HP"
-
-#else /* unknown compiler */
-# define COMPILER_ID ""
-#endif
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
-#ifdef SIMULATE_ID
-char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
-#endif
-
-#ifdef __QNXNTO__
-char const* qnxnto = "INFO" ":" "qnxnto[]";
-#endif
-
-#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
-char const *info_cray = "INFO" ":" "compiler_wrapper[CrayPrgEnv]";
-#endif
-
-#define STRINGIFY_HELPER(X) #X
-#define STRINGIFY(X) STRINGIFY_HELPER(X)
-
-/* Identify known platforms by name.  */
-#if defined(__linux) || defined(__linux__) || defined(linux)
-# define PLATFORM_ID "Linux"
-
-#elif defined(__MSYS__)
-# define PLATFORM_ID "MSYS"
-
-#elif defined(__CYGWIN__)
-# define PLATFORM_ID "Cygwin"
-
-#elif defined(__MINGW32__)
-# define PLATFORM_ID "MinGW"
-
-#elif defined(__APPLE__)
-# define PLATFORM_ID "Darwin"
-
-#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
-# define PLATFORM_ID "Windows"
-
-#elif defined(__FreeBSD__) || defined(__FreeBSD)
-# define PLATFORM_ID "FreeBSD"
-
-#elif defined(__NetBSD__) || defined(__NetBSD)
-# define PLATFORM_ID "NetBSD"
-
-#elif defined(__OpenBSD__) || defined(__OPENBSD)
-# define PLATFORM_ID "OpenBSD"
-
-#elif defined(__sun) || defined(sun)
-# define PLATFORM_ID "SunOS"
-
-#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
-# define PLATFORM_ID "AIX"
-
-#elif defined(__hpux) || defined(__hpux__)
-# define PLATFORM_ID "HP-UX"
-
-#elif defined(__HAIKU__)
-# define PLATFORM_ID "Haiku"
-
-#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
-# define PLATFORM_ID "BeOS"
-
-#elif defined(__QNX__) || defined(__QNXNTO__)
-# define PLATFORM_ID "QNX"
-
-#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
-# define PLATFORM_ID "Tru64"
-
-#elif defined(__riscos) || defined(__riscos__)
-# define PLATFORM_ID "RISCos"
-
-#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
-# define PLATFORM_ID "SINIX"
-
-#elif defined(__UNIX_SV__)
-# define PLATFORM_ID "UNIX_SV"
-
-#elif defined(__bsdos__)
-# define PLATFORM_ID "BSDOS"
-
-#elif defined(_MPRAS) || defined(MPRAS)
-# define PLATFORM_ID "MP-RAS"
-
-#elif defined(__osf) || defined(__osf__)
-# define PLATFORM_ID "OSF1"
-
-#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
-# define PLATFORM_ID "SCO_SV"
-
-#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
-# define PLATFORM_ID "ULTRIX"
-
-#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
-# define PLATFORM_ID "Xenix"
-
-#elif defined(__WATCOMC__)
-# if defined(__LINUX__)
-#  define PLATFORM_ID "Linux"
-
-# elif defined(__DOS__)
-#  define PLATFORM_ID "DOS"
-
-# elif defined(__OS2__)
-#  define PLATFORM_ID "OS2"
-
-# elif defined(__WINDOWS__)
-#  define PLATFORM_ID "Windows3x"
-
-# elif defined(__VXWORKS__)
-#  define PLATFORM_ID "VxWorks"
-
-# else /* unknown platform */
-#  define PLATFORM_ID
-# endif
-
-#elif defined(__INTEGRITY)
-# if defined(INT_178B)
-#  define PLATFORM_ID "Integrity178"
-
-# else /* regular Integrity */
-#  define PLATFORM_ID "Integrity"
-# endif
-
-# elif defined(_ADI_COMPILER)
-#  define PLATFORM_ID "ADSP"
-
-#else /* unknown platform */
-# define PLATFORM_ID
-
-#endif
-
-/* For windows compilers MSVC and Intel we can determine
-   the architecture of the compiler being used.  This is because
-   the compilers do not have flags that can change the architecture,
-   but rather depend on which compiler is being used
-*/
-#if defined(_WIN32) && defined(_MSC_VER)
-# if defined(_M_IA64)
-#  define ARCHITECTURE_ID "IA64"
-
-# elif defined(_M_ARM64EC)
-#  define ARCHITECTURE_ID "ARM64EC"
-
-# elif defined(_M_X64) || defined(_M_AMD64)
-#  define ARCHITECTURE_ID "x64"
-
-# elif defined(_M_IX86)
-#  define ARCHITECTURE_ID "X86"
-
-# elif defined(_M_ARM64)
-#  define ARCHITECTURE_ID "ARM64"
-
-# elif defined(_M_ARM)
-#  if _M_ARM == 4
-#   define ARCHITECTURE_ID "ARMV4I"
-#  elif _M_ARM == 5
-#   define ARCHITECTURE_ID "ARMV5I"
-#  else
-#   define ARCHITECTURE_ID "ARMV" STRINGIFY(_M_ARM)
-#  endif
-
-# elif defined(_M_MIPS)
-#  define ARCHITECTURE_ID "MIPS"
-
-# elif defined(_M_SH)
-#  define ARCHITECTURE_ID "SHx"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__WATCOMC__)
-# if defined(_M_I86)
-#  define ARCHITECTURE_ID "I86"
-
-# elif defined(_M_IX86)
-#  define ARCHITECTURE_ID "X86"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
-# if defined(__ICCARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__ICCRX__)
-#  define ARCHITECTURE_ID "RX"
-
-# elif defined(__ICCRH850__)
-#  define ARCHITECTURE_ID "RH850"
-
-# elif defined(__ICCRL78__)
-#  define ARCHITECTURE_ID "RL78"
-
-# elif defined(__ICCRISCV__)
-#  define ARCHITECTURE_ID "RISCV"
-
-# elif defined(__ICCAVR__)
-#  define ARCHITECTURE_ID "AVR"
-
-# elif defined(__ICC430__)
-#  define ARCHITECTURE_ID "MSP430"
-
-# elif defined(__ICCV850__)
-#  define ARCHITECTURE_ID "V850"
-
-# elif defined(__ICC8051__)
-#  define ARCHITECTURE_ID "8051"
-
-# elif defined(__ICCSTM8__)
-#  define ARCHITECTURE_ID "STM8"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__ghs__)
-# if defined(__PPC64__)
-#  define ARCHITECTURE_ID "PPC64"
-
-# elif defined(__ppc__)
-#  define ARCHITECTURE_ID "PPC"
-
-# elif defined(__ARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__x86_64__)
-#  define ARCHITECTURE_ID "x64"
-
-# elif defined(__i386__)
-#  define ARCHITECTURE_ID "X86"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__clang__) && defined(__ti__)
-# if defined(__ARM_ARCH)
-#  define ARCHITECTURE_ID "Arm"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__TI_COMPILER_VERSION__)
-# if defined(__TI_ARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__MSP430__)
-#  define ARCHITECTURE_ID "MSP430"
-
-# elif defined(__TMS320C28XX__)
-#  define ARCHITECTURE_ID "TMS320C28x"
-
-# elif defined(__TMS320C6X__) || defined(_TMS320C6X)
-#  define ARCHITECTURE_ID "TMS320C6x"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-# elif defined(__ADSPSHARC__)
-#  define ARCHITECTURE_ID "SHARC"
-
-# elif defined(__ADSPBLACKFIN__)
-#  define ARCHITECTURE_ID "Blackfin"
-
-#elif defined(__TASKING__)
-
-# if defined(__CTC__) || defined(__CPTC__)
-#  define ARCHITECTURE_ID "TriCore"
-
-# elif defined(__CMCS__)
-#  define ARCHITECTURE_ID "MCS"
-
-# elif defined(__CARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__CARC__)
-#  define ARCHITECTURE_ID "ARC"
-
-# elif defined(__C51__)
-#  define ARCHITECTURE_ID "8051"
-
-# elif defined(__CPCP__)
-#  define ARCHITECTURE_ID "PCP"
-
-# else
-#  define ARCHITECTURE_ID ""
-# endif
-
-#else
-#  define ARCHITECTURE_ID
-#endif
-
-/* Convert integer to decimal digit literals.  */
-#define DEC(n)                   \
-  ('0' + (((n) / 10000000)%10)), \
-  ('0' + (((n) / 1000000)%10)),  \
-  ('0' + (((n) / 100000)%10)),   \
-  ('0' + (((n) / 10000)%10)),    \
-  ('0' + (((n) / 1000)%10)),     \
-  ('0' + (((n) / 100)%10)),      \
-  ('0' + (((n) / 10)%10)),       \
-  ('0' +  ((n) % 10))
-
-/* Convert integer to hex digit literals.  */
-#define HEX(n)             \
-  ('0' + ((n)>>28 & 0xF)), \
-  ('0' + ((n)>>24 & 0xF)), \
-  ('0' + ((n)>>20 & 0xF)), \
-  ('0' + ((n)>>16 & 0xF)), \
-  ('0' + ((n)>>12 & 0xF)), \
-  ('0' + ((n)>>8  & 0xF)), \
-  ('0' + ((n)>>4  & 0xF)), \
-  ('0' + ((n)     & 0xF))
-
-/* Construct a string literal encoding the version number. */
-#ifdef COMPILER_VERSION
-char const* info_version = "INFO" ":" "compiler_version[" COMPILER_VERSION "]";
-
-/* Construct a string literal encoding the version number components. */
-#elif defined(COMPILER_VERSION_MAJOR)
-char const info_version[] = {
-  'I', 'N', 'F', 'O', ':',
-  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[',
-  COMPILER_VERSION_MAJOR,
-# ifdef COMPILER_VERSION_MINOR
-  '.', COMPILER_VERSION_MINOR,
-#  ifdef COMPILER_VERSION_PATCH
-   '.', COMPILER_VERSION_PATCH,
-#   ifdef COMPILER_VERSION_TWEAK
-    '.', COMPILER_VERSION_TWEAK,
-#   endif
-#  endif
-# endif
-  ']','\0'};
-#endif
-
-/* Construct a string literal encoding the internal version number. */
-#ifdef COMPILER_VERSION_INTERNAL
-char const info_version_internal[] = {
-  'I', 'N', 'F', 'O', ':',
-  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','_',
-  'i','n','t','e','r','n','a','l','[',
-  COMPILER_VERSION_INTERNAL,']','\0'};
-#elif defined(COMPILER_VERSION_INTERNAL_STR)
-char const* info_version_internal = "INFO" ":" "compiler_version_internal[" COMPILER_VERSION_INTERNAL_STR "]";
-#endif
-
-/* Construct a string literal encoding the version number components. */
-#ifdef SIMULATE_VERSION_MAJOR
-char const info_simulate_version[] = {
-  'I', 'N', 'F', 'O', ':',
-  's','i','m','u','l','a','t','e','_','v','e','r','s','i','o','n','[',
-  SIMULATE_VERSION_MAJOR,
-# ifdef SIMULATE_VERSION_MINOR
-  '.', SIMULATE_VERSION_MINOR,
-#  ifdef SIMULATE_VERSION_PATCH
-   '.', SIMULATE_VERSION_PATCH,
-#   ifdef SIMULATE_VERSION_TWEAK
-    '.', SIMULATE_VERSION_TWEAK,
-#   endif
-#  endif
-# endif
-  ']','\0'};
-#endif
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]";
-char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]";
-
-
-
-#define CXX_STD_98 199711L
-#define CXX_STD_11 201103L
-#define CXX_STD_14 201402L
-#define CXX_STD_17 201703L
-#define CXX_STD_20 202002L
-#define CXX_STD_23 202302L
-
-#if defined(__INTEL_COMPILER) && defined(_MSVC_LANG)
-#  if _MSVC_LANG > CXX_STD_17
-#    define CXX_STD _MSVC_LANG
-#  elif _MSVC_LANG == CXX_STD_17 && defined(__cpp_aggregate_paren_init)
-#    define CXX_STD CXX_STD_20
-#  elif _MSVC_LANG > CXX_STD_14 && __cplusplus > CXX_STD_17
-#    define CXX_STD CXX_STD_20
-#  elif _MSVC_LANG > CXX_STD_14
-#    define CXX_STD CXX_STD_17
-#  elif defined(__INTEL_CXX11_MODE__) && defined(__cpp_aggregate_nsdmi)
-#    define CXX_STD CXX_STD_14
-#  elif defined(__INTEL_CXX11_MODE__)
-#    define CXX_STD CXX_STD_11
-#  else
-#    define CXX_STD CXX_STD_98
-#  endif
-#elif defined(_MSC_VER) && defined(_MSVC_LANG)
-#  if _MSVC_LANG > __cplusplus
-#    define CXX_STD _MSVC_LANG
-#  else
-#    define CXX_STD __cplusplus
-#  endif
-#elif defined(__NVCOMPILER)
-#  if __cplusplus == CXX_STD_17 && defined(__cpp_aggregate_paren_init)
-#    define CXX_STD CXX_STD_20
-#  else
-#    define CXX_STD __cplusplus
-#  endif
-#elif defined(__INTEL_COMPILER) || defined(__PGI)
-#  if __cplusplus == CXX_STD_11 && defined(__cpp_namespace_attributes)
-#    define CXX_STD CXX_STD_17
-#  elif __cplusplus == CXX_STD_11 && defined(__cpp_aggregate_nsdmi)
-#    define CXX_STD CXX_STD_14
-#  else
-#    define CXX_STD __cplusplus
-#  endif
-#elif (defined(__IBMCPP__) || defined(__ibmxl__)) && defined(__linux__)
-#  if __cplusplus == CXX_STD_11 && defined(__cpp_aggregate_nsdmi)
-#    define CXX_STD CXX_STD_14
-#  else
-#    define CXX_STD __cplusplus
-#  endif
-#elif __cplusplus == 1 && defined(__GXX_EXPERIMENTAL_CXX0X__)
-#  define CXX_STD CXX_STD_11
-#else
-#  define CXX_STD __cplusplus
-#endif
-
-const char* info_language_standard_default = "INFO" ":" "standard_default["
-#if CXX_STD > CXX_STD_23
-  "26"
-#elif CXX_STD > CXX_STD_20
-  "23"
-#elif CXX_STD > CXX_STD_17
-  "20"
-#elif CXX_STD > CXX_STD_14
-  "17"
-#elif CXX_STD > CXX_STD_11
-  "14"
-#elif CXX_STD >= CXX_STD_11
-  "11"
-#else
-  "98"
-#endif
-"]";
-
-const char* info_language_extensions_default = "INFO" ":" "extensions_default["
-#if (defined(__clang__) || defined(__GNUC__) || defined(__xlC__) ||           \
-     defined(__TI_COMPILER_VERSION__)) &&                                     \
-  !defined(__STRICT_ANSI__)
-  "ON"
-#else
-  "OFF"
-#endif
-"]";
-
-/*--------------------------------------------------------------------------*/
-
-int main(int argc, char* argv[])
-{
-  int require = 0;
-  require += info_compiler[argc];
-  require += info_platform[argc];
-  require += info_arch[argc];
-#ifdef COMPILER_VERSION_MAJOR
-  require += info_version[argc];
-#endif
-#ifdef COMPILER_VERSION_INTERNAL
-  require += info_version_internal[argc];
-#endif
-#ifdef SIMULATE_ID
-  require += info_simulate[argc];
-#endif
-#ifdef SIMULATE_VERSION_MAJOR
-  require += info_simulate_version[argc];
-#endif
-#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
-  require += info_cray[argc];
-#endif
-  require += info_language_standard_default[argc];
-  require += info_language_extensions_default[argc];
-  (void)argv;
-  return require;
-}
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
deleted file mode 100755
index 78617c271080d9e2231a72abde01b7fc302df0f2..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 15576
zcmeHOU2Ggz6~4Pp8VBO66YAo|6&V#&xfD-!9mi|~rt8>ik0t+<)Dfm3Ovbxod&T}S
zI~zHbfFJ|KSgHCWK^`a|p+10AK_ygpp*RW@f?AY5AVqyZE~1jD($*C}N=fA9oO{n%
z&tBFAfj~UWwRX;&@0{=4JLk^qT+f{SLVA288i@#QE#hMWHKSc2DKcC=LOUQ*A}QKn
zdxz)}w}8GwV#=OU0<5ZCjW)_w!dpNhuM>Bg$U77aeW=DGM2WoZ+65dCG?s#n19>~q
zK)Nnpqz+iJz22XJWN3!m*5yZu$1=#np{(^N|FwZeIYW6lO_F)2B5#9u8^mLIh5BR3
z`NW*yCrSC#WeRNAQgSPV&RZm&E{DmVCH8^sfmi+Pzti9S#CySzVT3MuzFBgA9|s;y
zts?%DEl=}t>TkPwFev{lDZS!QJ~!LncPO9j$>)mI#h%4ve@}m(St*&lvS%Du96oqX
zjZU5r(Q{%IG3G}^q(P684lc5x@2&8`v?ITo{Nh`0EI$0;<EPL3@J07)HwJ$F*z4$n
z$AK}?2ODDe;f6N;F!ry=8F0F@iQ@=h`<vi64x<T<eK*5Dv<)t7d%jRA+7;jNeA^cG
z*z|;*bv<`JSMgnMdSWPFD!S9oY~EG2<`x^KCqqFBPOb=HGmDNrmn%B?+(WJabH&eQ
z?zsnNtRK}veQ!PkOw<yHXB0j<K6Y%#?llkh3Eu5B<#%2b<_KmJ{;)+vR6GKb&#xan
z_H{TdTf_yzst0nr1^9dyouTn{&(~Y~K83H-b<OxH1#C?zJL9akYq()3zfKMJ2sbqR
zVZysL{0YM28vZoltM>`n;2<djO8->=r%Om0t^{!UN|E^003JMl*8;fwepcbbZJ2>D
z17QZj41^g7GZ1DV%)oys1AmIW?{C)9wN`6o=jB5}SYKZCqqQs6($8Bj$sW<3czta7
zrB7SSzqgkDuyOx%I<cC#Y@Hu?860XIOThZ`oEba#CFu|ND;Vee&X-Z#d)@DV&~p@e
zcWo_p@Ekf`A_@M_NdF_>M{)P2wY*_neB(ar;`J6Q^1SuZrhh90I6?thYio0{gTq^V
z9N)Qt0+>bh@Cj>a;58F=t>st!Hfv?zF2HLYR{>hj)M~ZocMby(Idy4kyqD&-_G1TA
z0^|L09(+$gjOEW=vzDuCzf9l6AzLdQzk^6C>1);nD{>|FtcX3g8cE*-{5RX+&o#qU
zfb$&}_X-hvc1L?X%7td$5dEvo@Rjt<Q!qvK`K!+u4mE6H2Eq)483;2FW+2Q!n1L_@
zVFtnsgc%4k5N4n;1Nc7co!Z#s$kfqHsZh@4UGF5kg*?^h-C(!RxLze!DxQqXmgqCp
zPP~_Q5~qY@l=F^1SMmxc$MNkdfsU71I7$2Pez2HzyezyMoO7yq|77CBWN{aLw}`z|
z>b9v#IjTrk%SSq4cz8t9Z`NvkASX6zwQ-R6t`%G4q2nU5*dFQHv#a${c%_FpzH9CT
z|GUs(c$a(=hZyqT2K*_+2luvrB|6l0OY}RyL?CQo2Eq)483;2FW+2Q!n1L_@VFtns
zgc<n%$^h3Ja($tyViaPYhROOFO+TmUkC48HBo{!ok-kcGjklA|b&p-7^S?|7Nay-T
zuJdL4Up8wcbXle1L9PibQ_&#SA!1u2`@57Xen9fwB=P@1Y#mC}x4UTXGzI2<lavT3
z-jt2`H)?7;07}<Q(&NO3H^p+ioJaU~Q|boU-zJ^=q4586!S&<Yb<B09hM_#Tj+E<0
zxlWYpLPv*&jvC$YJm78v{>|?-6Gm^mw=bTI9}(M_?oGtE>l|>*-wyFsO?Sb0h={!+
zWhhH;z@eG{2c<n$uPbMFEVqq__Xs@?BNFcr>r{uz{-1)Kc5$0XrWjEY>--JCg@$Lq
zybs0+M%lQ=)dTHL1vPBXgSKDn5x3KI^AuSh2e~hLo8b9i(zg+Ze)W3arwKPw%9GEt
zAA`C-+9vqAR8}E=ia09)iNzckKb}$`$GJgxyN0JA4>*2<>XzlR6Y$-QcoeQe!c{aV
zbO0QWOV4K);?Qrm7XK*Vn14ObqY{6wNRdCsA17RoKLfbIP66p}gD-7^i=heUGw#sL
z%n&^b8_SxRa#`39jwgC^#kmqc`+`bzxGL<lWse*moJiZ&@Nr=ee{yngVr)p*qvKP@
z2FLBGk&y?|)Asb>vGFw2z`I$;cc9#T3M$&OxuRXIxLK{DJr%4<r;7J%rDQL_V=^d}
zmm}bZYD&YWX#y+aa}Y`^m#;^Ia(7A1JH`2`Gw<5}_;gJ<@FPHBLqH!QLZ!Z)o*ae}
z{>A|MgFA4=qf@o|aHvH*ve`<7fp@C^Z}L-trauP|X60<bcV<EQo{|f^mn*{03d+JP
zmVDQoFILU6S1P-ne>MQkR&($}k6f0Z!DC}RzB4bR`+`$h5N7sl5xP*)_mqVmb~Y$B
z*gQAyAVHWiRi+O)6{egB(<{lTHr)k#&T|T`y^sY4Yl>kzp69^ukiq*9&MD+F&{qj!
z!Nx4-VMhgnYzh-5sNfd;z$yM8?c#kKE`|Ej;ZC~WvgG?VcY?mb_I^<CUK=GaNqm+m
z!ddY54eR}|6XY)vpXCSGktBcLGCZd7ze#+S20N0}`JVv%uW;|?@$-6wB_BVpNA&SK
zz{j-+^Lf3(@=@v+j}ddnd|r3t0K*|OpVvPudA$QJvg!H%ETFhHVLq=%Sn@iK$IpH&
zKM#Cd>#)x2ow`)r$~g*-pJ0LaH_R#XdA-Gw*IV4be*E76F2-eh{eD9C6<$|@i){M*
zJqc)#&-W>o-_jDM-LB;CcY=JrkFw--FLmGWn=Hh>NB#5h3j<MThTMwFO4PRm*Y#&$
z5Bq2S3*^9(&p#&U$Nw{pzfOFX(@Z4E`DYl%2df!*4kE_udHx-p?$0{Q-vTEV;PZNa
zy$7Rho$pH9(wYAX7;x_CvaPS%_;-=~`$t~SGmq!-HQ-|Yn9sjsT0I0Hv~DHpTjsNT
z6D&bKuMgLW&(|pjU>?is8egQyGp=NkR2Ix*eG_&N<MH#lCP{qVAIBPOEdU@!?sXIM
z@%uH{m>-mU?gjnI6!0fxJOD<V10E0OWjA0v_8`Ceu+pC7j>xE~uqJHI{{_C3gSJN_
HXsY--f}ZvE

diff --git a/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml b/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
deleted file mode 100644
index 731c5465937..00000000000
--- a/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
+++ /dev/null
@@ -1,562 +0,0 @@
-
----
-events:
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineSystem.cmake:205 (message)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      The system is: Linux - 6.10.2-273-tkg-eevdf - x86_64
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:17 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:64 (__determine_compiler_id_test)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCCompiler.cmake:123 (CMAKE_DETERMINE_COMPILER_ID)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Compiling the C compiler identification source file "CMakeCCompilerId.c" succeeded.
-      Compiler: /usr/bin/cc 
-      Build flags: 
-      Id flags:  
-      
-      The output was:
-      0
-      
-      
-      Compilation of the C compiler identification source "CMakeCCompilerId.c" produced "a.out"
-      
-      The C compiler identification is GNU, found in:
-        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:17 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:64 (__determine_compiler_id_test)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCXXCompiler.cmake:126 (CMAKE_DETERMINE_COMPILER_ID)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" succeeded.
-      Compiler: /usr/bin/c++ 
-      Build flags: 
-      Id flags:  
-      
-      The output was:
-      0
-      
-      
-      Compilation of the CXX compiler identification source "CMakeCXXCompilerId.cpp" produced "a.out"
-      
-      The CXX compiler identification is GNU, found in:
-        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
-      
-  -
-    kind: "try_compile-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:74 (try_compile)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    checks:
-      - "Detecting C compiler ABI info"
-    directories:
-      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-OLEfcT"
-      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-OLEfcT"
-    cmakeVariables:
-      CMAKE_C_FLAGS: ""
-      CMAKE_C_FLAGS_DEBUG: "-g"
-      CMAKE_EXE_LINKER_FLAGS: ""
-    buildResult:
-      variable: "CMAKE_C_ABI_COMPILED"
-      cached: true
-      stdout: |
-        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-OLEfcT'
-        
-        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_834ca
-        [1/2] /usr/bin/cc   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c
-        Using built-in specs.
-        COLLECT_GCC=/usr/bin/cc
-        Target: x86_64-pc-linux-gnu
-        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
-        Thread model: posix
-        Supported LTO compression algorithms: zlib zstd
-        gcc version 14.2.1 20240910 (GCC) 
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/'
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1 -quiet -v /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c -quiet -dumpdir CMakeFiles/cmTC_834ca.dir/ -dumpbase CMakeCCompilerABI.c.c -dumpbase-ext .c -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/ccfiH50L.s
-        GNU C17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)
-        	compiled by GNU C version 14.2.1 20240910, GMP version 6.3.0, MPFR version 4.2.1, MPC version 1.3.1, isl version isl-0.27-GMP
-        
-        GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
-        ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"
-        #include "..." search starts here:
-        #include <...> search starts here:
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include
-         /usr/local/include
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed
-         /usr/include
-        End of search list.
-        Compiler executable checksum: 91e980a230f7d2e39f93577991713edd
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/'
-         as -v --64 -o CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o /tmp/ccfiH50L.s
-        GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0
-        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
-        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.'
-        [2/2] : && /usr/bin/cc  -v -Wl,-v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -o cmTC_834ca   && :
-        Using built-in specs.
-        COLLECT_GCC=/usr/bin/cc
-        COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper
-        Target: x86_64-pc-linux-gnu
-        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
-        Thread model: posix
-        Supported LTO compression algorithms: zlib zstd
-        gcc version 14.2.1 20240910 (GCC) 
-        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
-        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
-        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_834ca' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_834ca.'
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cc3hcm2q.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_834ca /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
-        collect2 version 14.2.1 20240910
-        /usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cc3hcm2q.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_834ca /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
-        GNU ld (GNU Binutils) 2.43.0
-        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_834ca' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_834ca.'
-        
-      exitCode: 0
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:182 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Parsed C implicit include dir info: rv=done
-        found start of include info
-        found start of implicit include info
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-          add: [/usr/local/include]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-          add: [/usr/include]
-        end of search list found
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-        collapse include dir [/usr/local/include] ==> [/usr/local/include]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-        collapse include dir [/usr/include] ==> [/usr/include]
-        implicit include dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include]
-      
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:218 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Parsed C implicit link information:
-        link line regex: [^( *|.*[/\\])(ld[0-9]*(\\.[a-z]+)?|CMAKE_LINK_STARTFILE-NOTFOUND|([^/\\]+-)?ld|collect2)[^/\\]*( |$)]
-        linker tool regex: [^[ 	]*(->|")?[ 	]*(([^"]*[/\\])?(ld[0-9]*(\\.[a-z]+)?))("|,| |$)]
-        ignore line: [Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-OLEfcT']
-        ignore line: []
-        ignore line: [Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_834ca]
-        ignore line: [[1/2] /usr/bin/cc   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c]
-        ignore line: [Using built-in specs.]
-        ignore line: [COLLECT_GCC=/usr/bin/cc]
-        ignore line: [Target: x86_64-pc-linux-gnu]
-        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
-        ignore line: [Thread model: posix]
-        ignore line: [Supported LTO compression algorithms: zlib zstd]
-        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/']
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1 -quiet -v /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c -quiet -dumpdir CMakeFiles/cmTC_834ca.dir/ -dumpbase CMakeCCompilerABI.c.c -dumpbase-ext .c -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/ccfiH50L.s]
-        ignore line: [GNU C17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)]
-        ignore line: [	compiled by GNU C version 14.2.1 20240910  GMP version 6.3.0  MPFR version 4.2.1  MPC version 1.3.1  isl version isl-0.27-GMP]
-        ignore line: []
-        ignore line: [GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072]
-        ignore line: [ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"]
-        ignore line: [#include "..." search starts here:]
-        ignore line: [#include <...> search starts here:]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-        ignore line: [ /usr/local/include]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-        ignore line: [ /usr/include]
-        ignore line: [End of search list.]
-        ignore line: [Compiler executable checksum: 91e980a230f7d2e39f93577991713edd]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/']
-        ignore line: [ as -v --64 -o CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o /tmp/ccfiH50L.s]
-        ignore line: [GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0]
-        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
-        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.']
-        ignore line: [[2/2] : && /usr/bin/cc  -v -Wl -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -o cmTC_834ca   && :]
-        ignore line: [Using built-in specs.]
-        ignore line: [COLLECT_GCC=/usr/bin/cc]
-        ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper]
-        ignore line: [Target: x86_64-pc-linux-gnu]
-        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
-        ignore line: [Thread model: posix]
-        ignore line: [Supported LTO compression algorithms: zlib zstd]
-        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
-        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
-        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
-        ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_834ca' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_834ca.']
-        link line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cc3hcm2q.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_834ca /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2] ==> ignore
-          arg [-plugin] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so] ==> ignore
-          arg [-plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper] ==> ignore
-          arg [-plugin-opt=-fresolution=/tmp/cc3hcm2q.res] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
-          arg [-plugin-opt=-pass-through=-lc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
-          arg [--build-id] ==> ignore
-          arg [--eh-frame-hdr] ==> ignore
-          arg [--hash-style=gnu] ==> ignore
-          arg [-m] ==> ignore
-          arg [elf_x86_64] ==> ignore
-          arg [-dynamic-linker] ==> ignore
-          arg [/lib64/ld-linux-x86-64.so.2] ==> ignore
-          arg [-pie] ==> ignore
-          arg [-o] ==> ignore
-          arg [cmTC_834ca] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib]
-          arg [-L/lib/../lib] ==> dir [/lib/../lib]
-          arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..]
-          arg [-v] ==> ignore
-          arg [CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o] ==> ignore
-          arg [-lgcc] ==> lib [gcc]
-          arg [--push-state] ==> ignore
-          arg [--as-needed] ==> ignore
-          arg [-lgcc_s] ==> lib [gcc_s]
-          arg [--pop-state] ==> ignore
-          arg [-lc] ==> lib [c]
-          arg [-lgcc] ==> lib [gcc]
-          arg [--push-state] ==> ignore
-          arg [--as-needed] ==> ignore
-          arg [-lgcc_s] ==> lib [gcc_s]
-          arg [--pop-state] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-        ignore line: [collect2 version 14.2.1 20240910]
-        ignore line: [/usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cc3hcm2q.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_834ca /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-        linker tool for 'C': /usr/bin/ld
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> [/usr/lib/Scrt1.o]
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> [/usr/lib/crti.o]
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> [/usr/lib/crtn.o]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> [/usr/lib]
-        collapse library dir [/lib/../lib] ==> [/lib]
-        collapse library dir [/usr/lib/../lib] ==> [/usr/lib]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> [/usr/lib]
-        implicit libs: [gcc;gcc_s;c;gcc;gcc_s]
-        implicit objs: [/usr/lib/Scrt1.o;/usr/lib/crti.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o;/usr/lib/crtn.o]
-        implicit dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib]
-        implicit fwks: []
-      
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CMakeDetermineLinkerId.cmake:40 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:255 (cmake_determine_linker_id)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Running the C compiler's linker: "/usr/bin/ld" "-v"
-      GNU ld (GNU Binutils) 2.43.0
-  -
-    kind: "try_compile-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:74 (try_compile)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    checks:
-      - "Detecting CXX compiler ABI info"
-    directories:
-      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-sO5Vxc"
-      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-sO5Vxc"
-    cmakeVariables:
-      CMAKE_CXX_FLAGS: ""
-      CMAKE_CXX_FLAGS_DEBUG: "-g"
-      CMAKE_CXX_SCAN_FOR_MODULES: "OFF"
-      CMAKE_EXE_LINKER_FLAGS: ""
-    buildResult:
-      variable: "CMAKE_CXX_ABI_COMPILED"
-      cached: true
-      stdout: |
-        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-sO5Vxc'
-        
-        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_8a98a
-        [1/2] /usr/bin/c++   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp
-        Using built-in specs.
-        COLLECT_GCC=/usr/bin/c++
-        Target: x86_64-pc-linux-gnu
-        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
-        Thread model: posix
-        Supported LTO compression algorithms: zlib zstd
-        gcc version 14.2.1 20240910 (GCC) 
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/'
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1plus -quiet -v -D_GNU_SOURCE /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp -quiet -dumpdir CMakeFiles/cmTC_8a98a.dir/ -dumpbase CMakeCXXCompilerABI.cpp.cpp -dumpbase-ext .cpp -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/cc0fUf3E.s
-        GNU C++17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)
-        	compiled by GNU C version 14.2.1 20240910, GMP version 6.3.0, MPFR version 4.2.1, MPC version 1.3.1, isl version isl-0.27-GMP
-        
-        GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
-        ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"
-        #include "..." search starts here:
-        #include <...> search starts here:
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include
-         /usr/local/include
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed
-         /usr/include
-        End of search list.
-        Compiler executable checksum: fce5a105c47978e141f61a441742cadf
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/'
-         as -v --64 -o CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o /tmp/cc0fUf3E.s
-        GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0
-        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
-        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.'
-        [2/2] : && /usr/bin/c++  -v -Wl,-v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -o cmTC_8a98a   && :
-        Using built-in specs.
-        COLLECT_GCC=/usr/bin/c++
-        COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper
-        Target: x86_64-pc-linux-gnu
-        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
-        Thread model: posix
-        Supported LTO compression algorithms: zlib zstd
-        gcc version 14.2.1 20240910 (GCC) 
-        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
-        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
-        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_8a98a' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_8a98a.'
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccjzVWgz.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_8a98a /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
-        collect2 version 14.2.1 20240910
-        /usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccjzVWgz.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_8a98a /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
-        GNU ld (GNU Binutils) 2.43.0
-        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_8a98a' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_8a98a.'
-        
-      exitCode: 0
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:182 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Parsed CXX implicit include dir info: rv=done
-        found start of include info
-        found start of implicit include info
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-          add: [/usr/local/include]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-          add: [/usr/include]
-        end of search list found
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1] ==> [/usr/include/c++/14.2.1]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu] ==> [/usr/include/c++/14.2.1/x86_64-pc-linux-gnu]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward] ==> [/usr/include/c++/14.2.1/backward]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-        collapse include dir [/usr/local/include] ==> [/usr/local/include]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-        collapse include dir [/usr/include] ==> [/usr/include]
-        implicit include dirs: [/usr/include/c++/14.2.1;/usr/include/c++/14.2.1/x86_64-pc-linux-gnu;/usr/include/c++/14.2.1/backward;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include]
-      
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:218 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Parsed CXX implicit link information:
-        link line regex: [^( *|.*[/\\])(ld[0-9]*(\\.[a-z]+)?|CMAKE_LINK_STARTFILE-NOTFOUND|([^/\\]+-)?ld|collect2)[^/\\]*( |$)]
-        linker tool regex: [^[ 	]*(->|")?[ 	]*(([^"]*[/\\])?(ld[0-9]*(\\.[a-z]+)?))("|,| |$)]
-        ignore line: [Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-sO5Vxc']
-        ignore line: []
-        ignore line: [Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_8a98a]
-        ignore line: [[1/2] /usr/bin/c++   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp]
-        ignore line: [Using built-in specs.]
-        ignore line: [COLLECT_GCC=/usr/bin/c++]
-        ignore line: [Target: x86_64-pc-linux-gnu]
-        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
-        ignore line: [Thread model: posix]
-        ignore line: [Supported LTO compression algorithms: zlib zstd]
-        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/']
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1plus -quiet -v -D_GNU_SOURCE /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp -quiet -dumpdir CMakeFiles/cmTC_8a98a.dir/ -dumpbase CMakeCXXCompilerABI.cpp.cpp -dumpbase-ext .cpp -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/cc0fUf3E.s]
-        ignore line: [GNU C++17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)]
-        ignore line: [	compiled by GNU C version 14.2.1 20240910  GMP version 6.3.0  MPFR version 4.2.1  MPC version 1.3.1  isl version isl-0.27-GMP]
-        ignore line: []
-        ignore line: [GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072]
-        ignore line: [ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"]
-        ignore line: [#include "..." search starts here:]
-        ignore line: [#include <...> search starts here:]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-        ignore line: [ /usr/local/include]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-        ignore line: [ /usr/include]
-        ignore line: [End of search list.]
-        ignore line: [Compiler executable checksum: fce5a105c47978e141f61a441742cadf]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/']
-        ignore line: [ as -v --64 -o CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o /tmp/cc0fUf3E.s]
-        ignore line: [GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0]
-        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
-        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.']
-        ignore line: [[2/2] : && /usr/bin/c++  -v -Wl -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -o cmTC_8a98a   && :]
-        ignore line: [Using built-in specs.]
-        ignore line: [COLLECT_GCC=/usr/bin/c++]
-        ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper]
-        ignore line: [Target: x86_64-pc-linux-gnu]
-        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
-        ignore line: [Thread model: posix]
-        ignore line: [Supported LTO compression algorithms: zlib zstd]
-        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
-        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
-        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
-        ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_8a98a' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_8a98a.']
-        link line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccjzVWgz.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_8a98a /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2] ==> ignore
-          arg [-plugin] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so] ==> ignore
-          arg [-plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper] ==> ignore
-          arg [-plugin-opt=-fresolution=/tmp/ccjzVWgz.res] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
-          arg [--build-id] ==> ignore
-          arg [--eh-frame-hdr] ==> ignore
-          arg [--hash-style=gnu] ==> ignore
-          arg [-m] ==> ignore
-          arg [elf_x86_64] ==> ignore
-          arg [-dynamic-linker] ==> ignore
-          arg [/lib64/ld-linux-x86-64.so.2] ==> ignore
-          arg [-pie] ==> ignore
-          arg [-o] ==> ignore
-          arg [cmTC_8a98a] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib]
-          arg [-L/lib/../lib] ==> dir [/lib/../lib]
-          arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..]
-          arg [-v] ==> ignore
-          arg [CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o] ==> ignore
-          arg [-lstdc++] ==> lib [stdc++]
-          arg [-lm] ==> lib [m]
-          arg [-lgcc_s] ==> lib [gcc_s]
-          arg [-lgcc] ==> lib [gcc]
-          arg [-lc] ==> lib [c]
-          arg [-lgcc_s] ==> lib [gcc_s]
-          arg [-lgcc] ==> lib [gcc]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-        ignore line: [collect2 version 14.2.1 20240910]
-        ignore line: [/usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccjzVWgz.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_8a98a /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-        linker tool for 'CXX': /usr/bin/ld
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> [/usr/lib/Scrt1.o]
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> [/usr/lib/crti.o]
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> [/usr/lib/crtn.o]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> [/usr/lib]
-        collapse library dir [/lib/../lib] ==> [/lib]
-        collapse library dir [/usr/lib/../lib] ==> [/usr/lib]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> [/usr/lib]
-        implicit libs: [stdc++;m;gcc_s;gcc;c;gcc_s;gcc]
-        implicit objs: [/usr/lib/Scrt1.o;/usr/lib/crti.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o;/usr/lib/crtn.o]
-        implicit dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib]
-        implicit fwks: []
-      
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CMakeDetermineLinkerId.cmake:40 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:255 (cmake_determine_linker_id)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Running the CXX compiler's linker: "/usr/bin/ld" "-v"
-      GNU ld (GNU Binutils) 2.43.0
-  -
-    kind: "try_compile-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CheckSourceCompiles.cmake:101 (try_compile)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CheckCSourceCompiles.cmake:52 (cmake_check_source_compiles)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/FindThreads.cmake:97 (CHECK_C_SOURCE_COMPILES)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/FindThreads.cmake:163 (_threads_check_libc)"
-      - "CMakeLists.txt:235 (find_package)"
-    checks:
-      - "Performing Test CMAKE_HAVE_LIBC_PTHREAD"
-    directories:
-      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-9jqBnk"
-      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-9jqBnk"
-    cmakeVariables:
-      CMAKE_C_FLAGS: ""
-      CMAKE_C_FLAGS_DEBUG: "-g"
-      CMAKE_EXE_LINKER_FLAGS: ""
-      CMAKE_MODULE_PATH: "/home/scarjit/Git/OrcaSlicer/cmake/modules/"
-      CMAKE_POSITION_INDEPENDENT_CODE: "ON"
-    buildResult:
-      variable: "CMAKE_HAVE_LIBC_PTHREAD"
-      cached: true
-      stdout: |
-        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-9jqBnk'
-        
-        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_85c24
-        [1/2] /usr/bin/cc -DCMAKE_HAVE_LIBC_PTHREAD  -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_85c24.dir/src.c.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-9jqBnk/src.c
-        [2/2] : && /usr/bin/cc   CMakeFiles/cmTC_85c24.dir/src.c.o -o cmTC_85c24   && :
-        
-      exitCode: 0
-  -
-    kind: "try_compile-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CheckIncludeFileCXX.cmake:89 (try_compile)"
-      - "cmake/modules/Findcereal.cmake:17 (CHECK_INCLUDE_FILE_CXX)"
-      - "CMakeLists.txt:544 (find_package)"
-    checks:
-      - "Looking for C++ include cereal/cereal.hpp"
-    directories:
-      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2"
-      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2"
-    cmakeVariables:
-      CMAKE_CXX_FLAGS: " -fext-numeric-literals -Wall -Wno-reorder"
-      CMAKE_CXX_FLAGS_DEBUG: "-g"
-      CMAKE_EXE_LINKER_FLAGS: ""
-      CMAKE_MODULE_PATH: "/home/scarjit/Git/OrcaSlicer/cmake/modules/"
-      CMAKE_POSITION_INDEPENDENT_CODE: "ON"
-    buildResult:
-      variable: "HAVE_CEREAL_H"
-      cached: true
-      stdout: |
-        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2'
-        
-        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_e14a3
-        [1/2] /usr/bin/c++   -fext-numeric-literals -Wall -Wno-reorder  -std=gnu++17 -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_e14a3.dir/CheckIncludeFile.cxx.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2/CheckIncludeFile.cxx
-        FAILED: CMakeFiles/cmTC_e14a3.dir/CheckIncludeFile.cxx.o 
-        /usr/bin/c++   -fext-numeric-literals -Wall -Wno-reorder  -std=gnu++17 -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_e14a3.dir/CheckIncludeFile.cxx.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2/CheckIncludeFile.cxx
-        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2/CheckIncludeFile.cxx:1:10: fatal error: cereal/cereal.hpp: No such file or directory
-            1 | #include <cereal/cereal.hpp>
-              |          ^~~~~~~~~~~~~~~~~~~
-        compilation terminated.
-        ninja: build stopped: subcommand failed.
-        
-      exitCode: 1
-...
diff --git a/cmake-build-debug/CMakeFiles/clion-Debug-log.txt b/cmake-build-debug/CMakeFiles/clion-Debug-log.txt
deleted file mode 100644
index 79f8f4ca097..00000000000
--- a/cmake-build-debug/CMakeFiles/clion-Debug-log.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake -DCMAKE_BUILD_TYPE=Debug -DCMAKE_MAKE_PROGRAM=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -G Ninja -S /home/scarjit/Git/OrcaSlicer -B /home/scarjit/Git/OrcaSlicer/cmake-build-debug
--- The C compiler identification is GNU 14.2.1
--- The CXX compiler identification is GNU 14.2.1
--- Detecting C compiler ABI info
--- Detecting C compiler ABI info - done
--- Check for working C compiler: /usr/bin/cc - skipped
--- Detecting C compile features
--- Detecting C compile features - done
--- Detecting CXX compiler ABI info
--- Detecting CXX compiler ABI info - done
--- Check for working CXX compiler: /usr/bin/c++ - skipped
--- Detecting CXX compile features
--- Detecting CXX compile features - done
--- SLIC3R_ASAN: OFF
--- SLIC3R_BUILD_SANDBOXES: OFF
--- SLIC3R_BUILD_TESTS: OFF
--- SLIC3R_DESKTOP_INTEGRATION: ON
--- SLIC3R_FHS: OFF
--- SLIC3R_GTK: 2
--- SLIC3R_GUI: ON
--- SLIC3R_MSVC_COMPILE_PARALLEL: ON
--- SLIC3R_MSVC_PDB: ON
--- SLIC3R_PCH: ON
--- SLIC3R_PERL_XS: OFF
--- SLIC3R_PROFILE: OFF
--- SLIC3R_STATIC: OFF
--- SLIC3R_WX_STABLE: OFF
--- SLIC3R_STATIC: OFF
--- CMAKE_PREFIX_PATH: (default)
--- PROJECT_SOURCE_DIR: /home/scarjit/Git/OrcaSlicer
--- CMAKE_MODULE_PATH: /home/scarjit/Git/OrcaSlicer/cmake/modules/
--- Found PkgConfig: /usr/bin/pkg-config (found version "2.3.0")
--- Performing Test CMAKE_HAVE_LIBC_PTHREAD
--- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
--- Found Threads: TRUE
--- Found DBus: /usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
--- LIBDIR: /home/scarjit/Git/OrcaSlicer/src
--- LIBDIR_BIN: /home/scarjit/Git/OrcaSlicer/cmake-build-debug/src
-CMake Warning (dev) at CMakeLists.txt:415 (find_package):
-  Policy CMP0167 is not set: The FindBoost module is removed.  Run "cmake
-  --help-policy CMP0167" for policy details.  Use the cmake_policy command to
-  set the policy and suppress this warning.
-
-This warning is for project developers.  Use -Wno-dev to suppress it.
-
--- Found Boost: /usr/lib/cmake/Boost-1.86.0/BoostConfig.cmake (found suitable version "1.86.0", minimum required is "1.66") found components: system filesystem thread log locale regex chrono atomic date_time iostreams program_options
--- TBB found in /usr/lib/cmake/TBB
--- Found OpenSSL: /usr/lib/libcrypto.so (found version "3.4.0")
--- Found CURL: /usr/lib/libcurl.so (found version "8.11.1") 
--- Found ZLIB: /usr/lib/libz.so (found version "1.3.1")
--- Found Eigen3: /usr/include/eigen3 (Required is at least version "3.3")
--- Found EXPAT: /usr/lib/libexpat.so (found version "2.6.4")
--- Found PNG: /usr/lib/libpng.so (found version "1.6.44")
--- Found OpenGL: /usr/lib/libOpenGL.so
-GLEW_ROOT: 
--- Found GLEW: /usr/include (found version "2.2.0")
--- Could NOT find cereal (missing: cereal_DIR)
--- Looking for C++ include cereal/cereal.hpp
--- Looking for C++ include cereal/cereal.hpp - not found
-CMake Error at cmake/modules/Findcereal.cmake:21 (message):
-  Cereal library not found.  Please install the dependency.
-Call Stack (most recent call first):
-  CMakeLists.txt:544 (find_package)
-
-
--- Configuring incomplete, errors occurred!
diff --git a/cmake-build-debug/CMakeFiles/clion-environment.txt b/cmake-build-debug/CMakeFiles/clion-environment.txt
deleted file mode 100644
index 292290e6b02..00000000000
--- a/cmake-build-debug/CMakeFiles/clion-environment.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-ToolSet: 1.0 (local)Ninja: 1.12.1@/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
-Options: 
-
-Options:-DCMAKE_MAKE_PROGRAM=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
\ No newline at end of file
diff --git a/cmake-build-debug/CMakeFiles/cmake.check_cache b/cmake-build-debug/CMakeFiles/cmake.check_cache
deleted file mode 100644
index 3dccd731726..00000000000
--- a/cmake-build-debug/CMakeFiles/cmake.check_cache
+++ /dev/null
@@ -1 +0,0 @@
-# This file is generated by cmake for dependency checking of the CMakeCache.txt file

From 5da8a8f3bc69c11c519cd806f22d65239dcb1f2a Mon Sep 17 00:00:00 2001
From: Ferdinand Linnenberg <ferdinand@linnenberg.dev>
Date: Thu, 12 Dec 2024 15:54:13 +0100
Subject: [PATCH 7/8] fix: restore Project.xml

---
 .idea/codeStyles/Project.xml | 7 +++++++
 1 file changed, 7 insertions(+)
 create mode 100644 .idea/codeStyles/Project.xml

diff --git a/.idea/codeStyles/Project.xml b/.idea/codeStyles/Project.xml
new file mode 100644
index 00000000000..f60388162da
--- /dev/null
+++ b/.idea/codeStyles/Project.xml
@@ -0,0 +1,7 @@
+<component name="ProjectCodeStyleConfiguration">
+  <code_scheme name="Project" version="173">
+    <clangFormatSettings>
+      <option name="ENABLED" value="true" />
+    </clangFormatSettings>
+  </code_scheme>
+</component>
\ No newline at end of file

From b122c173fef212c83e08f76f2f4575bf11141e5f Mon Sep 17 00:00:00 2001
From: Ferdinand Linnenberg <ferdinand@linnenberg.dev>
Date: Thu, 12 Dec 2024 15:55:35 +0100
Subject: [PATCH 8/8] fix: order

---
 resources/profiles/BBL.json | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json
index 7e6e041d4d1..356da0b297c 100644
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -737,14 +737,14 @@
             "name": "Generic PLA-CF @base",
             "sub_path": "filament/Generic PLA-CF @base.json"
         },
-        {
-            "name": "Bambu PLA-CF @base",
-            "sub_path": "filament/Bambu PLA-CF @base.json"
-        },
         {
             "name": "Generic SBS @base",
             "sub_path": "filament/Generic SBS @base.json"
         },
+        {
+            "name": "Bambu PLA-CF @base",
+            "sub_path": "filament/Bambu PLA-CF @base.json"
+        },
         {
             "name": "Bambu Support For PLA @base",
             "sub_path": "filament/Bambu Support For PLA @base.json"
@@ -1405,10 +1405,6 @@
             "name": "Generic PLA @BBL A1M",
             "sub_path": "filament/Generic PLA @BBL A1M.json"
         },
-        {
-            "name": "Generic SBS",
-            "sub_path": "filament/Generic SBS.json"
-        },
         {
             "name": "Generic PLA @BBL A1M 0.2 nozzle",
             "sub_path": "filament/Generic PLA @BBL A1M 0.2 nozzle.json"
@@ -1453,6 +1449,10 @@
             "name": "Generic PLA-CF @BBL A1",
             "sub_path": "filament/Generic PLA-CF @BBL A1.json"
         },
+        {
+            "name": "Generic SBS",
+            "sub_path": "filament/Generic SBS.json"
+        },
         {
             "name": "Bambu PLA-CF @BBL X1C 0.8 nozzle",
             "sub_path": "filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json"