diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.2 nozzle.json index 42295d2e07f..20092edb07d 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.2 nozzle.json @@ -12,14 +12,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +80,14 @@ "nil", "nil" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "270", "270" @@ -84,6 +96,10 @@ "260", "260" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.8 nozzle.json index 84516b390f5..4b8bd2dd719 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.8 nozzle.json @@ -12,14 +12,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +80,14 @@ "nil", "nil" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "260", "260" @@ -84,6 +96,10 @@ "260", "260" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.8 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D.json index 9a75c00edc7..20c665eda24 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D.json @@ -12,14 +12,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +80,14 @@ "nil", "nil" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "270", "270" @@ -84,6 +96,10 @@ "260", "260" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle" diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2D.json index 4adc7acffe6..70a6df115d8 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSB50_03", "instantiation": "true", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "60" ], @@ -17,6 +16,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -77,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "270", "270" @@ -85,6 +96,10 @@ "260", "260" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.2 nozzle.json index 7ed26e55413..6cea3e37b1c 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.2 nozzle.json @@ -12,14 +12,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +80,14 @@ "nil", "nil" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "270", "270" @@ -84,6 +96,10 @@ "270", "270" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.4 nozzle.json index e34c6fcdc9c..d6ad389d082 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.4 nozzle.json @@ -12,14 +12,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +80,14 @@ "nil", "nil" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "270", "270" @@ -84,6 +96,10 @@ "270", "270" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.6 nozzle.json index 9330bdea6fb..ce956016ed2 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.6 nozzle.json @@ -12,14 +12,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +80,14 @@ "nil", "nil" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "270", "270" @@ -84,6 +96,10 @@ "270", "270" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.6 nozzle", "Bambu Lab H2D 0.8 nozzle" diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2D.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2D.json index 16d44923572..76f7ddb5efa 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSB02_03", "instantiation": "true", - "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: ASA Aero Printing Guide.", "chamber_temperatures": [ "60" ], @@ -17,6 +16,14 @@ "0.52", "0.52" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -77,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "270", "270" @@ -85,6 +96,10 @@ "270", "270" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.4 nozzle.json index 0dc7891e21a..90e23ca21dc 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.4 nozzle.json @@ -16,6 +16,14 @@ "0.9", "0.9" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "275", "275" @@ -84,6 +96,10 @@ "275", "275" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "textured_plate_temp": [ "90" ], diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.6 nozzle.json index f0d5c0e9003..a0c175f2a2e 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.6 nozzle.json @@ -16,6 +16,14 @@ "0.9", "0.9" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "275", "275" @@ -84,6 +96,10 @@ "275", "275" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.6 nozzle", "Bambu Lab H2D 0.8 nozzle" diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2D.json index 94342ca6f02..9f4efee3a18 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSN03_02", "instantiation": "true", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "60" ], @@ -17,6 +16,14 @@ "0.96", "0.96" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -77,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "290", "290" @@ -85,6 +96,10 @@ "290", "290" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D.json index f247ac4cbe2..e050df9d1a8 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSN05_04", "instantiation": "true", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "60" ], @@ -17,6 +16,14 @@ "0.96", "0.96" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -77,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "275", "275" @@ -85,6 +96,10 @@ "275", "275" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2D.json index 701fdb27283..d15921856f8 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSN08_03", "instantiation": "true", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "60" ], @@ -17,6 +16,14 @@ "0.96", "0.96" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -77,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "265", "265" @@ -85,6 +96,10 @@ "265", "265" ], + "retraction_distances_when_ec": [ + "4", + "4" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D.json index f1c088d54f5..60658dbdc5a 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSN04_01", "instantiation": "true", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "60" ], @@ -17,6 +16,14 @@ "0.96", "0.96" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -77,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "290", "290" @@ -85,6 +96,10 @@ "290", "290" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.2 nozzle.json index b1451b3230c..a459ab3a023 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.2 nozzle.json @@ -16,6 +16,14 @@ "0.94", "0.94" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "260", "260" @@ -84,6 +96,10 @@ "270", "270" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.4 nozzle.json index a707b6eef9b..af10e5ab16d 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.4 nozzle.json @@ -16,6 +16,14 @@ "0.94", "0.94" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "280", "280" @@ -84,6 +96,10 @@ "270", "270" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.6 nozzle.json index 0cc9818b2fc..f62a7f50e92 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.6 nozzle.json @@ -16,6 +16,14 @@ "0.94", "0.94" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "260", "260" @@ -84,6 +96,10 @@ "270", "270" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.6 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.8 nozzle.json index 698b67f82b3..40b3905c154 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.8 nozzle.json @@ -16,6 +16,14 @@ "0.94", "0.94" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "260", "260" @@ -84,6 +96,10 @@ "270", "270" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.8 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.2 nozzle.json index adff3994c0c..250c6150bda 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.2 nozzle.json @@ -19,6 +19,14 @@ "0.94", "0.94" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -79,6 +87,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "260", "260" @@ -87,6 +99,10 @@ "270", "270" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "slow_down_layer_time": [ "12" ], diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.4 nozzle.json index a1c12727cc7..56594043a86 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.4 nozzle.json @@ -19,6 +19,14 @@ "0.94", "0.94" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -79,6 +87,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "280", "280" @@ -87,6 +99,10 @@ "270", "270" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "slow_down_layer_time": [ "12" ], diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.6 nozzle.json index 24b2b2d884b..abbe84ef11d 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.6 nozzle.json @@ -19,6 +19,14 @@ "0.94", "0.94" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -79,6 +87,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "260", "260" @@ -87,6 +99,10 @@ "270", "270" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "slow_down_layer_time": [ "12" ], diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.8 nozzle.json index 758e3699719..8bc30fa64d0 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.8 nozzle.json @@ -19,6 +19,14 @@ "0.94", "0.94" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -79,6 +87,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "260", "260" @@ -87,6 +99,10 @@ "270", "270" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "slow_down_layer_time": [ "12" ], diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2D.json index 04d53df5d56..7dae8dd2a26 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFST01_02", "instantiation": "true", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "50" ], @@ -29,6 +28,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -89,6 +96,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "270", "270" @@ -97,6 +108,10 @@ "270", "270" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.2 nozzle.json index ef972732510..5e27c791f45 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.2 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSG00_15", "instantiation": "true", - "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "filament_deretraction_speed": [ "nil", "nil" @@ -14,6 +13,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "255", "255" @@ -85,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.4 nozzle.json index 8efe40ce381..cd82443afb6 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSG00_09", "instantiation": "true", - "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "filament_deretraction_speed": [ "nil", "nil" @@ -14,6 +13,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "255", "255" @@ -85,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.6 nozzle.json index c09ca5acc2b..b8a1694b60f 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.6 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSG00_16", "instantiation": "true", - "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "fan_max_speed": [ "60" ], @@ -20,6 +19,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -80,6 +87,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "255", "255" @@ -91,6 +102,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.6 nozzle", "Bambu Lab H2D 0.8 nozzle" diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.2 nozzle.json index 986811078a0..ec278558062 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.2 nozzle.json @@ -19,6 +19,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -87,6 +95,10 @@ "0", "0" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "245", "245" @@ -101,6 +113,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "slow_down_layer_time": [ "10" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.4 nozzle.json index 44ee4ca53cf..bb6fcc6e9e1 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.4 nozzle.json @@ -31,6 +31,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -111,6 +119,10 @@ "hole_limit_min": [ "0.88" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "245", "245" @@ -125,6 +137,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "slow_down_layer_time": [ "10" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.6 nozzle.json index 014a111aaf9..7072cb2edd8 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.6 nozzle.json @@ -19,6 +19,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -87,6 +95,10 @@ "0", "0" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "245", "245" @@ -101,6 +113,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "slow_down_layer_time": [ "10" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.2 nozzle.json index 17aae2e0a84..135efa324ed 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.2 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSG01_12", "instantiation": "true", - "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "filament_deretraction_speed": [ "nil", "nil" @@ -14,6 +13,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "245", "245" @@ -85,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "slow_down_layer_time": [ "8" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.4 nozzle.json index e276102be76..977ad0105de 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSG01_06", "instantiation": "true", - "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "filament_deretraction_speed": [ "nil", "nil" @@ -14,6 +13,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "245", "245" @@ -85,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "slow_down_layer_time": [ "8" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.6 nozzle.json index 16b1de75771..63ea67e7ce6 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.6 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSG01_11", "instantiation": "true", - "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "fan_max_speed": [ "60" ], @@ -20,6 +19,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -80,6 +87,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "245", "245" @@ -91,6 +102,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "slow_down_layer_time": [ "8" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.4 nozzle.json index a92df35bd2d..a39655adf88 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.4 nozzle.json @@ -22,6 +22,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -82,6 +90,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "255", "255" @@ -93,6 +105,10 @@ "overhang_fan_speed": [ "100" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.6 nozzle.json index d857a9cc7b2..b4d2ad73bd7 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.6 nozzle.json @@ -22,6 +22,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -82,6 +90,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "255", "255" @@ -93,6 +105,10 @@ "overhang_fan_speed": [ "100" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.6 nozzle", "Bambu Lab H2D 0.8 nozzle" diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2D.json index 5010fd89311..f3c4c8776fd 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSA11_05", "instantiation": "true", - "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: Instructions for printing RC model with foaming PLA (PLA Aero).", "additional_cooling_fan_speed": [ "0" ], @@ -17,6 +16,14 @@ "0.6", "0.6" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -77,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -85,6 +96,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "slow_down_layer_time": [ "8" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.2 nozzle.json index bb39515f201..f91021878ff 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.2 nozzle.json @@ -18,14 +18,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -82,6 +86,14 @@ "nil", "nil" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -93,6 +105,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.8 nozzle.json index c65fc8ded77..b16da9d7d86 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.8 nozzle.json @@ -18,14 +18,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -82,6 +86,14 @@ "nil", "nil" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -93,6 +105,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.8 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D.json index 26f9242700e..6ee708c875d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D.json @@ -18,14 +18,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -82,6 +86,14 @@ "nil", "nil" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -93,6 +105,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle" diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D 0.2 nozzle.json index 32e11940a57..b54267c2ec1 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D 0.2 nozzle.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -84,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D 0.8 nozzle.json index 41f42b7b696..0837aabcafb 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D 0.8 nozzle.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -84,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.8 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D.json index a52b1f7e1a1..3c137c1e152 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -84,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle" diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D 0.2 nozzle.json index 3206a58d6e0..adc3599dac1 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D 0.2 nozzle.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -84,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D 0.8 nozzle.json index 225bf2d7659..2b8bd834b0c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D 0.8 nozzle.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -84,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.8 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D.json index a83a5c21ee8..f110c8756bb 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -84,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle" diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2D 0.2 nozzle.json index b7fbac78bf1..06197bec5b8 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2D 0.2 nozzle.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -84,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2D.json index ae6b7efebb8..4f8aa95af5d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2D.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,18 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -84,6 +104,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.2 nozzle.json index 4575afe58bf..486b8280f8d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.2 nozzle.json @@ -28,6 +28,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -99,6 +107,10 @@ "0", "0" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "210", "210" @@ -110,6 +122,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.8 nozzle.json index 0ea5181eaa9..5adeeda6c19 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.8 nozzle.json @@ -28,6 +28,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -99,6 +107,10 @@ "0", "0" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "210", "210" @@ -110,6 +122,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.8 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D.json index 671a7a148a8..85f5a7cb385 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D.json @@ -40,6 +40,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -114,6 +122,10 @@ "hole_coef_2": [ "-0.0081" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "210", "210" @@ -125,6 +137,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle" diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2D.json index 022185925ee..9ff8854f5e6 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2D.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -84,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.2 nozzle.json index 5a7fc61f1aa..aa4050ef2e7 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.2 nozzle.json @@ -18,14 +18,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -82,6 +86,14 @@ "nil", "nil" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -93,6 +105,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.8 nozzle.json index 959968cdc66..aaa7b778e8a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.8 nozzle.json @@ -18,14 +18,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -82,6 +86,14 @@ "nil", "nil" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -93,6 +105,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.8 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D.json index eea153666ca..53d053d4c0e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D.json @@ -18,14 +18,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -82,6 +86,14 @@ "nil", "nil" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -93,6 +105,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle" diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2D 0.2 nozzle.json index d94499904d7..e34e7be54ed 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2D 0.2 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSA02_06", "instantiation": "true", - "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_deretraction_speed": [ "nil", "nil" @@ -14,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -85,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2D.json index 3d6992b1cd3..1cb7cb844be 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSA02_07", "instantiation": "true", - "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_deretraction_speed": [ "nil", "nil" @@ -14,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -85,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D 0.2 nozzle.json index 6abd4b991dd..b008fc446b5 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D 0.2 nozzle.json @@ -12,14 +12,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +80,14 @@ "nil", "nil" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "230", "230" @@ -87,6 +99,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "slow_down_layer_time": [ "6" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D.json index f460beeba75..9adab9d98e0 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D.json @@ -12,14 +12,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +80,14 @@ "nil", "nil" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "230", "230" @@ -87,6 +99,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "slow_down_layer_time": [ "6" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.2 nozzle.json index d60647b7e69..f6a8c704c83 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.2 nozzle.json @@ -16,6 +16,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "230", "230" @@ -87,8 +99,9 @@ "pre_start_fan_time": [ "2" ], - "slow_down_layer_time": [ - "6" + "retraction_distances_when_ec": [ + "10", + "10" ], "supertack_plate_temp": [ "35" @@ -96,6 +109,9 @@ "supertack_plate_temp_initial_layer": [ "35" ], + "slow_down_layer_time": [ + "6" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D.json index 0dc3984f43b..52cc4972cad 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D.json @@ -16,6 +16,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "230", "230" @@ -87,8 +99,9 @@ "pre_start_fan_time": [ "2" ], - "slow_down_layer_time": [ - "6" + "retraction_distances_when_ec": [ + "10", + "10" ], "supertack_plate_temp": [ "35" @@ -96,6 +109,9 @@ "supertack_plate_temp_initial_layer": [ "35" ], + "slow_down_layer_time": [ + "6" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2D.json index 732dbba6248..b09073e5c7a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2D.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -84,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2D 0.2 nozzle.json index b02137d7c29..461da63e7e9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2D 0.2 nozzle.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -84,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2D.json index c50912aeebc..5e819882030 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2D.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -84,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.2 nozzle.json index f16ce7357fc..060dd8fef9f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.2 nozzle.json @@ -9,14 +9,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -25,18 +29,13 @@ "1.6", "1.6" ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], "filament_ramming_volumetric_speed": [ "-1", "-1" ], + "filament_printable": [ + "1" + ], "filament_retract_before_wipe": [ "nil", "nil" @@ -81,7 +80,8 @@ "nil", "nil" ], - "filament_printable": [ + "long_retractions_when_ec": [ + "1", "1" ], "nozzle_temperature": [ @@ -92,8 +92,9 @@ "220", "220" ], - "nozzle_temperature_range_low": [ - "200" + "retraction_distances_when_ec": [ + "10", + "10" ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.8 nozzle.json index 6eb9573c0c8..5f4182ad5a4 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.8 nozzle.json @@ -9,14 +9,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -25,18 +29,13 @@ "12", "12" ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], "filament_ramming_volumetric_speed": [ "-1", "-1" ], + "filament_printable": [ + "1" + ], "filament_retract_before_wipe": [ "nil", "nil" @@ -65,9 +64,6 @@ "nil", "nil" ], - "filament_vendor": [ - "Bambu lab" - ], "filament_wipe": [ "nil", "nil" @@ -84,7 +80,8 @@ "nil", "nil" ], - "filament_printable": [ + "long_retractions_when_ec": [ + "1", "1" ], "nozzle_temperature": [ @@ -95,8 +92,9 @@ "220", "220" ], - "nozzle_temperature_range_low": [ - "200" + "retraction_distances_when_ec": [ + "10", + "10" ], "compatible_printers": [ "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D.json index 5e9ecdf6f7b..3339124057f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D.json @@ -9,14 +9,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -25,18 +29,13 @@ "12", "12" ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], "filament_ramming_volumetric_speed": [ "-1", "-1" ], + "filament_printable": [ + "1" + ], "filament_retract_before_wipe": [ "nil", "nil" @@ -81,7 +80,8 @@ "nil", "nil" ], - "filament_printable": [ + "long_retractions_when_ec": [ + "1", "1" ], "nozzle_temperature": [ @@ -92,8 +92,9 @@ "220", "220" ], - "nozzle_temperature_range_low": [ - "200" + "retraction_distances_when_ec": [ + "10", + "10" ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle" diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2D 0.8 nozzle.json index bf16af43267..8559247418f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2D 0.8 nozzle.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -84,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.8 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2D.json index 9b2d3c20545..d8a43ba368b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2D.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -84,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle" diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.4 nozzle.json index 97f2c1f8deb..25399d43ea7 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.4 nozzle.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "230", "230" @@ -81,6 +93,10 @@ "230", "230" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.6 nozzle.json index a0287a8053e..4f4782b5224 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.6 nozzle.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "230", "230" @@ -81,6 +93,10 @@ "230", "230" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.6 nozzle", "Bambu Lab H2D 0.8 nozzle" diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2D.json index 0ade2451c80..6591a5f531a 100644 --- a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSN06_02", "instantiation": "true", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "60" ], @@ -17,6 +16,14 @@ "0.96", "0.96" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -29,6 +36,9 @@ "-1", "-1" ], + "filament_printable": [ + "1" + ], "filament_retract_before_wipe": [ "nil", "nil" @@ -77,7 +87,8 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "filament_printable": [ + "long_retractions_when_ec": [ + "1", "1" ], "nozzle_temperature": [ @@ -88,6 +99,10 @@ "290", "290" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PPA-GF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PPA-GF @BBL H2D.json index 1bf5d78c041..148f2307694 100644 --- a/resources/profiles/BBL/filament/Bambu PPA-GF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PPA-GF @BBL H2D.json @@ -16,6 +16,14 @@ "0.96", "0.96" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "290", "290" @@ -84,6 +96,10 @@ "290", "290" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2D.json index 015a5da21ff..7e1ce4326e5 100644 --- a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2D.json @@ -12,14 +12,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.96", "0.96" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -32,6 +36,9 @@ "-1", "-1" ], + "filament_printable": [ + "1" + ], "filament_retract_before_wipe": [ "nil", "nil" @@ -76,7 +83,12 @@ "nil", "nil" ], - "filament_printable": [ + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "1", "1" ], "nozzle_temperature": [ @@ -87,6 +99,10 @@ "320", "320" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PVA @BBL H2D 0.2 nozzle.json index b87521eef0f..0afb501ac27 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL H2D 0.2 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSS04_11", "instantiation": "true", - "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.", "filament_deretraction_speed": [ "nil", "nil" @@ -14,6 +13,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "240", "240" @@ -82,6 +93,10 @@ "240", "240" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PVA @BBL H2D.json index c37eda2e405..d5fdcf1a7a6 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSS04_10", "instantiation": "true", - "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.", "filament_deretraction_speed": [ "nil", "nil" @@ -14,6 +13,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "240", "240" @@ -82,6 +93,10 @@ "240", "240" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2D.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2D.json index 2a08e9508c7..96656b5cd86 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSS03_03", "instantiation": "true", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "chamber_temperatures": [ "60" ], @@ -17,6 +16,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -77,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "280", "280" @@ -85,6 +96,10 @@ "280", "280" ], + "retraction_distances_when_ec": [ + "4", + "4" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D 0.2 nozzle.json index 59fd20355cc..430bcaec6b1 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D 0.2 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSS02_06", "instantiation": "true", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "filament_deretraction_speed": [ "nil", "nil" @@ -14,6 +13,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "240", "240" @@ -85,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D.json index 003b968d1f4..81c1b2310de 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSS02_07", "instantiation": "true", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "fan_max_speed": [ "30" ], @@ -20,6 +19,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -88,6 +95,10 @@ "0", "0" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -99,6 +110,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D 0.2 nozzle.json index 701d96eda1c..1d0a2e220de 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D 0.2 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSS05_09", "instantiation": "true", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "eng_plate_temp": [ "60" ], @@ -20,6 +19,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -80,6 +87,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "210", "210" @@ -91,6 +102,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D.json index ec09b77a7c5..ed1fde53805 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSS05_08", "instantiation": "true", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "eng_plate_temp": [ "60" ], @@ -20,6 +19,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -80,6 +87,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "210", "210" @@ -91,6 +102,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL H2D.json b/resources/profiles/BBL/filament/Bambu Support G @BBL H2D.json index 571a91a9fb1..c21183b8883 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu Support G @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSS01_02", "instantiation": "true", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "chamber_temperatures": [ "60" ], @@ -17,6 +16,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -77,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "280", "280" @@ -85,6 +96,10 @@ "280", "280" ], + "retraction_distances_when_ec": [ + "4", + "4" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL H2D 0.2 nozzle.json index 14d1fadfbca..a7ca33a73c8 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL H2D 0.2 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSS00_06", "instantiation": "true", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "filament_deretraction_speed": [ "nil", "nil" @@ -14,6 +13,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "240", "240" @@ -85,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL H2D.json b/resources/profiles/BBL/filament/Bambu Support W @BBL H2D.json index 1a5d818d555..f7287a29702 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSS00_05", "instantiation": "true", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "filament_deretraction_speed": [ "nil", "nil" @@ -14,6 +13,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -85,6 +96,10 @@ "pre_start_fan_time": [ "2" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D.json index 3cadc60998b..4ff87359cc0 100644 --- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSS06_02", "instantiation": "true", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "chamber_temperatures": [ "60" ], @@ -17,6 +16,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -77,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "270", "270" @@ -85,6 +96,10 @@ "260", "260" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2D.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2D.json index 8d42b1e5492..3a8802768f0 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSU04_02", "instantiation": "true", - "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "additional_cooling_fan_speed": [ "100" ], @@ -17,6 +16,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -29,6 +36,9 @@ "0.55", "0.55" ], + "filament_printable": [ + "2" + ], "filament_retract_before_wipe": [ "nil", "nil" @@ -85,12 +95,13 @@ "20", "20" ], - "filament_printable": [ - "2" - ], "impact_strength_z": [ "88.7" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature_range_high": [ "250" ], @@ -102,6 +113,10 @@ "225", "225" ], + "retraction_distances_when_ec": [ + "0", + "0" + ], "compatible_printers": [ "Bambu Lab H2D 0.6 nozzle", "Bambu Lab H2D 0.8 nozzle" diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2D.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2D.json index d7b26ebde2e..6b9901b12a1 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSU03_02", "instantiation": "true", - "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "additional_cooling_fan_speed": [ "100" ], @@ -17,6 +16,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -29,6 +36,9 @@ "0.7", "0.7" ], + "filament_printable": [ + "2" + ], "filament_retract_before_wipe": [ "nil", "nil" @@ -85,12 +95,16 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "filament_printable": [ - "2" - ], "impact_strength_z": [ "88.7" ], + "long_retractions_when_ec": [ + "1", + "1" + ], + "nozzle_temperature_range_high": [ + "250" + ], "nozzle_temperature": [ "225", "225" @@ -99,8 +113,9 @@ "225", "225" ], - "nozzle_temperature_range_high": [ - "250" + "retraction_distances_when_ec": [ + "0", + "0" ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2D.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2D.json index 3f306394b66..2bf5d72ed4f 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSU01_03", "instantiation": "true", - "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "additional_cooling_fan_speed": [ "100" ], @@ -17,6 +16,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -29,6 +36,9 @@ "0.9", "0.9" ], + "filament_printable": [ + "2" + ], "filament_retract_before_wipe": [ "nil", "nil" @@ -77,8 +87,9 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "filament_printable": [ - "2" + "long_retractions_when_ec": [ + "1", + "1" ], "nozzle_temperature": [ "230", @@ -88,6 +99,10 @@ "230", "230" ], + "retraction_distances_when_ec": [ + "0", + "0" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2D.json index 36d3bcf4c86..aca01604470 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSU00_08", "instantiation": "true", - "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "additional_cooling_fan_speed": [ "100" ], @@ -17,6 +16,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -29,6 +36,9 @@ "3.0", "3.0" ], + "filament_printable": [ + "2" + ], "filament_retract_before_wipe": [ "nil", "nil" @@ -77,8 +87,9 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "filament_printable": [ - "2" + "long_retractions_when_ec": [ + "1", + "1" ], "nozzle_temperature": [ "230", @@ -88,6 +99,10 @@ "230", "230" ], + "retraction_distances_when_ec": [ + "0", + "0" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2D.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2D.json index 757df803d81..be6ac882f01 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSU02_04", "instantiation": "true", - "description": "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide.", "additional_cooling_fan_speed": [ "100" ], @@ -16,14 +15,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.97", "0.97" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -80,6 +83,14 @@ "nil", "nil" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "230", "230" @@ -88,6 +99,10 @@ "230", "230" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @BBL H2D 0.2 nozzle.json index 217d85b6f3b..cf724803215 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL H2D 0.2 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSB99_08", "instantiation": "true", - "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "60" ], @@ -17,6 +16,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -77,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "270", "270" @@ -85,6 +96,10 @@ "260", "260" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL H2D.json b/resources/profiles/BBL/filament/Generic ABS @BBL H2D.json index b903b46f0f5..d77a833f831 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSB99_07", "instantiation": "true", - "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "60" ], @@ -17,6 +16,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -77,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "270", "270" @@ -85,6 +96,10 @@ "260", "260" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @BBL H2D 0.2 nozzle.json index 5e72993afcd..876b763ef5a 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL H2D 0.2 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSB98_05", "instantiation": "true", - "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "60" ], @@ -17,6 +16,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -77,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "260", "260" @@ -85,6 +96,10 @@ "260", "260" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL H2D.json b/resources/profiles/BBL/filament/Generic ASA @BBL H2D.json index 5ff5f3827ff..c23bb5ae16d 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSB98_06", "instantiation": "true", - "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "60" ], @@ -17,6 +16,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -77,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "260", "260" @@ -85,6 +96,10 @@ "260", "260" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic BVOH @BBL H2D.json b/resources/profiles/BBL/filament/Generic BVOH @BBL H2D.json index 51f829b9030..1c2f39b79ea 100644 --- a/resources/profiles/BBL/filament/Generic BVOH @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic BVOH @BBL H2D.json @@ -13,6 +13,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -81,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic EVA @BBL H2D.json b/resources/profiles/BBL/filament/Generic EVA @BBL H2D.json index f33b9cb053b..c9b67bb833d 100644 --- a/resources/profiles/BBL/filament/Generic EVA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic EVA @BBL H2D.json @@ -14,6 +14,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +82,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "210", "210" @@ -82,6 +94,10 @@ "210", "210" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL H2D 0.2 nozzle.json index 5c69e125c54..e567ca8e47b 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL H2D 0.2 nozzle.json @@ -13,6 +13,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "240", "240" @@ -81,6 +93,10 @@ "240", "240" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL H2D.json b/resources/profiles/BBL/filament/Generic HIPS @BBL H2D.json index 30904197c3c..4b8f6be2068 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL H2D.json @@ -13,6 +13,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "240", "240" @@ -81,6 +93,10 @@ "240", "240" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PA @BBL H2D.json b/resources/profiles/BBL/filament/Generic PA @BBL H2D.json index ec76ac6d740..deea161c8e2 100644 --- a/resources/profiles/BBL/filament/Generic PA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PA @BBL H2D.json @@ -27,6 +27,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -87,6 +95,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature_range_low": [ "240" ], @@ -110,6 +122,10 @@ "required_nozzle_HRC": [ "3" ], + "retraction_distances_when_ec": [ + "4", + "4" + ], "slow_down_layer_time": [ "8" ], diff --git a/resources/profiles/BBL/filament/Generic PA-CF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PA-CF @BBL H2D.json index 2b9da9ca507..f7a2c9dfb56 100644 --- a/resources/profiles/BBL/filament/Generic PA-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PA-CF @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSN98_02", "instantiation": "true", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "60" ], @@ -17,6 +16,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -77,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "290", "290" @@ -85,6 +96,10 @@ "290", "290" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PC @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @BBL H2D 0.2 nozzle.json index 6d3507c4331..97a483f1b4b 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL H2D 0.2 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSC99_09", "instantiation": "true", - "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "60" ], @@ -17,6 +16,14 @@ "0.94", "0.94" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -77,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "280", "280" @@ -85,6 +96,10 @@ "270", "270" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Generic PC @BBL H2D.json b/resources/profiles/BBL/filament/Generic PC @BBL H2D.json index 54ab2534ac3..2f03526f1e3 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSC99_10", "instantiation": "true", - "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "60" ], @@ -17,6 +16,14 @@ "0.94", "0.94" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -77,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "280", "280" @@ -85,6 +96,10 @@ "270", "270" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PCTG @BBL H2D.json b/resources/profiles/BBL/filament/Generic PCTG @BBL H2D.json index bbb16d8d008..6eb79000f5d 100644 --- a/resources/profiles/BBL/filament/Generic PCTG @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PCTG @BBL H2D.json @@ -13,6 +13,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "255", "255" @@ -81,6 +93,10 @@ "255", "255" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PE @BBL H2D.json b/resources/profiles/BBL/filament/Generic PE @BBL H2D.json index e8adf9db6ab..073cc39d2c2 100644 --- a/resources/profiles/BBL/filament/Generic PE @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PE @BBL H2D.json @@ -14,6 +14,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +82,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "210", "210" @@ -82,6 +94,10 @@ "210", "210" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PE-CF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PE-CF @BBL H2D.json index ea4aa906197..62ef3f6cdbf 100644 --- a/resources/profiles/BBL/filament/Generic PE-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PE-CF @BBL H2D.json @@ -13,6 +13,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "210", "210" @@ -81,6 +93,10 @@ "210", "210" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @BBL H2D 0.2 nozzle.json index 55c50315325..06b82570ada 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL H2D 0.2 nozzle.json @@ -13,6 +13,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "255", "255" @@ -81,6 +93,10 @@ "255", "255" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL H2D.json b/resources/profiles/BBL/filament/Generic PETG @BBL H2D.json index 216f0acd5ce..0011010386a 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL H2D.json @@ -13,6 +13,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "255", "255" @@ -81,6 +93,10 @@ "255", "255" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2D 0.2 nozzle.json index f312caf6ce3..92054309eb3 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2D 0.2 nozzle.json @@ -13,6 +13,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -81,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2D.json index 09ed0f1095a..43de238d153 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2D.json @@ -9,14 +9,18 @@ "nil", "nil" ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "filament_flow_ratio": [ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +77,14 @@ "nil", "nil" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -81,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2D.json index db3d15d64ae..60db06e24e0 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2D.json @@ -22,6 +22,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -82,6 +90,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "255", "255" @@ -93,6 +105,10 @@ "overhang_fan_speed": [ "100" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PHA @BBL H2D.json b/resources/profiles/BBL/filament/Generic PHA @BBL H2D.json index 5eb0ec439e4..ab4d6894e63 100644 --- a/resources/profiles/BBL/filament/Generic PHA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PHA @BBL H2D.json @@ -14,6 +14,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +82,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -82,6 +94,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @BBL H2D 0.2 nozzle.json index df183c8e384..1c0a3a4eccd 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL H2D 0.2 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSL99_07", "instantiation": "true", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", "filament_deretraction_speed": [ "nil", "nil" @@ -14,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -82,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL H2D.json b/resources/profiles/BBL/filament/Generic PLA @BBL H2D.json index 136a0ea1a51..e2401fd52a5 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSL99_06", "instantiation": "true", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", "filament_deretraction_speed": [ "nil", "nil" @@ -14,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -82,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2D 0.2 nozzle.json index dc99fe6d491..2cae77aa955 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2D 0.2 nozzle.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -81,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2D.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2D.json index 156a690bb39..d7a7cdba067 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2D.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -81,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "slow_down_layer_time": [ "4" ], diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2D.json b/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2D.json index 82baea16d24..e2095110454 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSL96_02", "instantiation": "true", - "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_deretraction_speed": [ "nil", "nil" @@ -14,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -82,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2D.json index 98417538b77..cb82bdbb2cd 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2D.json @@ -13,6 +13,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -81,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PP @BBL H2D.json b/resources/profiles/BBL/filament/Generic PP @BBL H2D.json index 6288491e13f..dbe6f9e38b8 100644 --- a/resources/profiles/BBL/filament/Generic PP @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PP @BBL H2D.json @@ -14,6 +14,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +82,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "235", "235" @@ -82,6 +94,10 @@ "235", "235" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PP-CF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PP-CF @BBL H2D.json index ce5a0b450f9..758d2f4b141 100644 --- a/resources/profiles/BBL/filament/Generic PP-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PP-CF @BBL H2D.json @@ -14,6 +14,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +82,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "235", "235" @@ -82,6 +94,10 @@ "235", "235" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PP-GF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PP-GF @BBL H2D.json index 7393d5384a3..ab6bbac2d55 100644 --- a/resources/profiles/BBL/filament/Generic PP-GF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PP-GF @BBL H2D.json @@ -14,6 +14,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +82,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "235", "235" @@ -82,6 +94,10 @@ "235", "235" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2D.json index 326ab0cec1c..cd032a10ea6 100644 --- a/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSN97_02", "instantiation": "true", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ "60" ], @@ -20,6 +19,14 @@ "0.96", "0.96" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -32,6 +39,9 @@ "-1", "-1" ], + "filament_printable": [ + "1" + ], "filament_retract_before_wipe": [ "nil", "nil" @@ -80,7 +90,8 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "filament_printable": [ + "long_retractions_when_ec": [ + "1", "1" ], "nozzle_temperature": [ @@ -94,6 +105,10 @@ "overhang_fan_threshold": [ "25%" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2D.json index 123addaf37a..f6d7679705c 100644 --- a/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2D.json @@ -16,6 +16,14 @@ "0.96", "0.96" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "290", "290" @@ -84,6 +96,10 @@ "290", "290" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PPS @BBL H2D.json b/resources/profiles/BBL/filament/Generic PPS @BBL H2D.json index 7c2b5d32ffb..88d7cd93edf 100644 --- a/resources/profiles/BBL/filament/Generic PPS @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PPS @BBL H2D.json @@ -13,6 +13,14 @@ "0.96", "0.96" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "320", "320" @@ -81,6 +93,10 @@ "320", "320" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2D.json index 689f1f445e3..29c8bea776c 100644 --- a/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFST98_01", "instantiation": "true", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "filament_deretraction_speed": [ "nil", "nil" @@ -14,6 +13,14 @@ "0.96", "0.96" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -26,6 +33,9 @@ "-1", "-1" ], + "filament_printable": [ + "1" + ], "filament_retract_before_wipe": [ "nil", "nil" @@ -74,7 +84,8 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "filament_printable": [ + "long_retractions_when_ec": [ + "1", "1" ], "nozzle_temperature": [ @@ -85,6 +96,10 @@ "320", "320" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PVA @BBL H2D 0.2 nozzle.json index ab9951c7389..4f970e0b1c4 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL H2D 0.2 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSS99_05", "instantiation": "true", - "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.", "filament_deretraction_speed": [ "nil", "nil" @@ -14,6 +13,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -82,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL H2D.json b/resources/profiles/BBL/filament/Generic PVA @BBL H2D.json index 85a14fcc96b..b3682de6f02 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSS99_06", "instantiation": "true", - "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.", "filament_deretraction_speed": [ "nil", "nil" @@ -14,6 +13,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -74,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -82,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic TPU @BBL H2D.json b/resources/profiles/BBL/filament/Generic TPU @BBL H2D.json index 6a2322fce1f..c31ebb85559 100644 --- a/resources/profiles/BBL/filament/Generic TPU @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic TPU @BBL H2D.json @@ -6,7 +6,6 @@ "filament_id": "GFU99", "setting_id": "GFSU99_02", "instantiation": "true", - "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "additional_cooling_fan_speed": [ "100" ], @@ -18,6 +17,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -30,6 +37,9 @@ "0.8", "0.8" ], + "filament_printable": [ + "2" + ], "filament_retract_before_wipe": [ "nil", "nil" @@ -78,8 +88,9 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "filament_printable": [ - "2" + "long_retractions_when_ec": [ + "1", + "1" ], "nozzle_temperature": [ "240", @@ -89,6 +100,10 @@ "240", "240" ], + "retraction_distances_when_ec": [ + "0", + "0" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2D.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2D.json index 670f9348b1e..06f312476a1 100644 --- a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2D.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GFSU98_04", "instantiation": "true", - "description": "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide.", "additional_cooling_fan_speed": [ "100" ], @@ -26,6 +25,14 @@ "1", "1" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -86,6 +93,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "230", "230" @@ -97,6 +108,10 @@ "overhang_fan_threshold": [ "25%" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "slow_down_layer_time": [ "10" ], diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2D 0.2 nozzle.json index 1f0ff514455..c57ddda870f 100644 --- a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2D 0.2 nozzle.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -81,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2D.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2D.json index 04eddec1b36..d646fcf95b4 100644 --- a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2D.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -81,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture PLA @BBL H2D 0.2 nozzle.json index c798582814d..111a063d5e6 100644 --- a/resources/profiles/BBL/filament/Overture PLA @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Overture PLA @BBL H2D 0.2 nozzle.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -81,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL H2D.json b/resources/profiles/BBL/filament/Overture PLA @BBL H2D.json index 762a85ac08f..3d5090323b0 100644 --- a/resources/profiles/BBL/filament/Overture PLA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Overture PLA @BBL H2D.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -81,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL H2D 0.2 nozzle.json index bfbddca7fbe..76288d64a0c 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL H2D 0.2 nozzle.json @@ -16,6 +16,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "270", "270" @@ -84,6 +96,10 @@ "260", "260" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL H2D.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL H2D.json index b1e0f912764..1b6d31b9be3 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL H2D.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL H2D.json @@ -16,6 +16,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "270", "270" @@ -84,6 +96,10 @@ "260", "260" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL H2D 0.2 nozzle.json index e5d3ccd4dad..c5899f0b9e2 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL H2D 0.2 nozzle.json @@ -16,6 +16,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "260", "260" @@ -84,6 +96,10 @@ "260", "260" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL H2D.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL H2D.json index 903d82db3cc..80ab8828555 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL H2D.json @@ -16,6 +16,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -76,6 +84,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "260", "260" @@ -84,6 +96,10 @@ "260", "260" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL H2D 0.2 nozzle.json index 6aa48218002..492d025bb98 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL H2D 0.2 nozzle.json @@ -13,6 +13,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "255", "255" @@ -81,6 +93,10 @@ "255", "255" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL H2D.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL H2D.json index 87ab74a2057..9ee2b060648 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL H2D.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL H2D.json @@ -13,6 +13,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature_range_high": [ "270" ], @@ -84,6 +96,10 @@ "255", "255" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL H2D 0.2 nozzle.json index 05505d8e78e..86eac899187 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL H2D 0.2 nozzle.json @@ -13,6 +13,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -81,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL H2D.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL H2D.json index 117af80c1b4..65ff5cc7631 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL H2D.json @@ -13,6 +13,14 @@ "0.95", "0.95" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -81,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL H2D 0.2 nozzle.json index 82961d6f987..24684ed83f8 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL H2D 0.2 nozzle.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -81,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL H2D.json b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL H2D.json index 59f07c3e86a..615a19a665c 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL H2D.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -81,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL H2D 0.2 nozzle.json index bc0b655ef53..b90b3821bf5 100644 --- a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL H2D 0.2 nozzle.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -81,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.2 nozzle" ], diff --git a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL H2D.json b/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL H2D.json index 61274d697af..aaa605e8a16 100644 --- a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL H2D.json +++ b/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL H2D.json @@ -13,6 +13,14 @@ "0.98", "0.98" ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], "filament_long_retractions_when_cut": [ "nil", "nil" @@ -73,6 +81,10 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "long_retractions_when_ec": [ + "1", + "1" + ], "nozzle_temperature": [ "220", "220" @@ -81,6 +93,10 @@ "220", "220" ], + "retraction_distances_when_ec": [ + "10", + "10" + ], "compatible_printers": [ "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/fdm_filament_common.json b/resources/profiles/BBL/filament/fdm_filament_common.json index 824b18b0768..a6f31c5d9a2 100644 --- a/resources/profiles/BBL/filament/fdm_filament_common.json +++ b/resources/profiles/BBL/filament/fdm_filament_common.json @@ -69,6 +69,9 @@ "filament_long_retractions_when_cut": [ "nil" ], + "filament_long_retractions_when_ec": [ + "nil" + ], "filament_max_volumetric_speed": [ "0" ], @@ -90,6 +93,9 @@ "filament_retraction_distances_when_cut": [ "nil" ], + "filament_retraction_distances_when_ec": [ + "nil" + ], "filament_retraction_length": [ "nil" ],