From 7a5746b1ae290797c9fdb4a88ad919fb9dbc0fee Mon Sep 17 00:00:00 2001 From: Vovodroid Date: Thu, 23 Jan 2025 12:01:38 +0200 Subject: [PATCH 1/4] Support threshold overlap (#6606) * Support threshold overlap * Update tooltip --- src/libslic3r/Preset.cpp | 2 +- src/libslic3r/PrintConfig.cpp | 13 ++++++++++++- src/libslic3r/PrintConfig.hpp | 1 + src/libslic3r/PrintObject.cpp | 1 + src/libslic3r/Support/SupportMaterial.cpp | 4 ++-- src/libslic3r/Support/TreeSupport3D.cpp | 2 +- src/slic3r/GUI/ConfigManipulation.cpp | 1 + src/slic3r/GUI/GUI_Factories.cpp | 6 +++--- src/slic3r/GUI/Tab.cpp | 1 + 9 files changed, 23 insertions(+), 8 deletions(-) diff --git a/src/libslic3r/Preset.cpp b/src/libslic3r/Preset.cpp index cfc777c8cc7..d4610cc961b 100644 --- a/src/libslic3r/Preset.cpp +++ b/src/libslic3r/Preset.cpp @@ -785,7 +785,7 @@ static std::vector s_Preset_print_options { "top_surface_speed", "support_speed", "support_object_xy_distance", "support_interface_speed", "bridge_speed", "internal_bridge_speed", "gap_infill_speed", "travel_speed", "travel_speed_z", "initial_layer_speed", "outer_wall_acceleration", "initial_layer_acceleration", "top_surface_acceleration", "default_acceleration", "skirt_type", "skirt_loops", "skirt_speed","min_skirt_length", "skirt_distance", "skirt_start_angle", "skirt_height", "draft_shield", - "brim_width", "brim_object_gap", "brim_type", "brim_ears_max_angle", "brim_ears_detection_length", "enable_support", "support_type", "support_threshold_angle", "enforce_support_layers", + "brim_width", "brim_object_gap", "brim_type", "brim_ears_max_angle", "brim_ears_detection_length", "enable_support", "support_type", "support_threshold_angle", "support_threshold_overlap","enforce_support_layers", "raft_layers", "raft_first_layer_density", "raft_first_layer_expansion", "raft_contact_distance", "raft_expansion", "support_base_pattern", "support_base_pattern_spacing", "support_expansion", "support_style", "independent_support_layer_height", diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index 0fd8c91b78d..1c259a028c6 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -4722,11 +4722,22 @@ void PrintConfigDef::init_fff_params() def->category = L("Support"); def->tooltip = L("Support will be generated for overhangs whose slope angle is below the threshold."); def->sidetext = L("°"); - def->min = 1; + def->min = 0; def->max = 90; def->mode = comSimple; def->set_default_value(new ConfigOptionInt(30)); + def = this->add("support_threshold_overlap", coFloatOrPercent); + def->label = L("Threshold overlap"); + def->category = L("Support"); + def->tooltip = L("If threshold angle is zero, support will be generated for overhangs whose overlap is below the threshold. The smaller this value is, the steeper the overhang that can be printed without support."); + def->sidetext = L("mm or %"); + def->min = 0; + def->max = 100; + def->max_literal = 0.5; + def->mode = comSimple; + def->set_default_value(new ConfigOptionFloatOrPercent(50., true)); + def = this->add("tree_support_branch_angle", coFloat); def->label = L("Tree support branch angle"); def->category = L("Support"); diff --git a/src/libslic3r/PrintConfig.hpp b/src/libslic3r/PrintConfig.hpp index dc222603b85..88cc8438bf2 100644 --- a/src/libslic3r/PrintConfig.hpp +++ b/src/libslic3r/PrintConfig.hpp @@ -820,6 +820,7 @@ PRINT_CONFIG_CLASS_DEFINE( ((ConfigOptionEnum, dont_filter_internal_bridges)) // Overhang angle threshold. ((ConfigOptionInt, support_threshold_angle)) + ((ConfigOptionFloatOrPercent, support_threshold_overlap)) ((ConfigOptionFloat, support_object_xy_distance)) ((ConfigOptionFloat, xy_hole_compensation)) ((ConfigOptionFloat, xy_contour_compensation)) diff --git a/src/libslic3r/PrintObject.cpp b/src/libslic3r/PrintObject.cpp index 01d7e242c97..0c5d78de778 100644 --- a/src/libslic3r/PrintObject.cpp +++ b/src/libslic3r/PrintObject.cpp @@ -1019,6 +1019,7 @@ bool PrintObject::invalidate_state_by_config_options( || opt_key == "support_expansion" //|| opt_key == "independent_support_layer_height" // BBS || opt_key == "support_threshold_angle" + || opt_key == "support_threshold_overlap" || opt_key == "raft_expansion" || opt_key == "raft_first_layer_density" || opt_key == "raft_first_layer_expansion" diff --git a/src/libslic3r/Support/SupportMaterial.cpp b/src/libslic3r/Support/SupportMaterial.cpp index 4d0aafcffb9..3050bd7f6e0 100644 --- a/src/libslic3r/Support/SupportMaterial.cpp +++ b/src/libslic3r/Support/SupportMaterial.cpp @@ -1517,8 +1517,8 @@ static inline ExPolygons detect_overhangs( (threshold_rad > 0. ? // Overhang defined by an angle. float(scale_(lower_layer.height / tan(threshold_rad))) : - // Overhang defined by half the extrusion width. - 0.5f * fw); + // Overhang defined by overlap. + fw - float(scale_(object_config.support_threshold_overlap.get_abs_value(unscale_(fw))))); // Overhang polygons for this layer and region. Polygons diff_polygons; Polygons layerm_polygons = to_polygons(layerm->slices.surfaces); diff --git a/src/libslic3r/Support/TreeSupport3D.cpp b/src/libslic3r/Support/TreeSupport3D.cpp index c96801e008d..fb4dcb2c9ab 100644 --- a/src/libslic3r/Support/TreeSupport3D.cpp +++ b/src/libslic3r/Support/TreeSupport3D.cpp @@ -239,7 +239,7 @@ static std::vector>> group_me for (const LayerRegion *layerm : lower_layer.regions()) external_perimeter_width += layerm->flow(frExternalPerimeter).scaled_width(); external_perimeter_width /= lower_layer.region_count(); - lower_layer_offset = float(0.5 * external_perimeter_width); + lower_layer_offset = external_perimeter_width - float(scale_(config.support_threshold_overlap.get_abs_value(unscale_(external_perimeter_width)))); } else lower_layer_offset = scaled(lower_layer.height / tan_threshold); overhangs = lower_layer_offset == 0 ? diff --git a/src/slic3r/GUI/ConfigManipulation.cpp b/src/slic3r/GUI/ConfigManipulation.cpp index 4bfcf18cf0c..44ed3da0120 100644 --- a/src/slic3r/GUI/ConfigManipulation.cpp +++ b/src/slic3r/GUI/ConfigManipulation.cpp @@ -599,6 +599,7 @@ void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, co "support_object_xy_distance"/*, "independent_support_layer_height"*/}) toggle_field(el, have_support_material); toggle_field("support_threshold_angle", have_support_material && is_auto(support_type)); + toggle_field("support_threshold_overlap", config->opt_int("support_threshold_angle") == 0 && have_support_material && is_auto(support_type)); //toggle_field("support_closing_radius", have_support_material && support_style == smsSnug); bool support_is_tree = config->opt_bool("enable_support") && is_tree(support_type); diff --git a/src/slic3r/GUI/GUI_Factories.cpp b/src/slic3r/GUI/GUI_Factories.cpp index 8d1452a0fae..416c2699052 100644 --- a/src/slic3r/GUI/GUI_Factories.cpp +++ b/src/slic3r/GUI/GUI_Factories.cpp @@ -61,7 +61,7 @@ static SettingsFactory::Bundle FREQ_SETTINGS_BUNDLE_FFF = { L("Shell"), { "wall_loops", "top_shell_layers", "bottom_shell_layers"} }, { L("Infill") , { "sparse_infill_density", "sparse_infill_pattern" } }, // BBS - { L("Support") , { "enable_support", "support_type", "support_threshold_angle", + { L("Support") , { "enable_support", "support_type", "support_threshold_angle", "support_threshold_overlap", "support_base_pattern", "support_on_build_plate_only","support_critical_regions_only", "support_remove_small_overhang", "support_base_pattern_spacing", "support_expansion"}}, @@ -88,7 +88,7 @@ std::map> SettingsFactory::OBJECT_C }}, { L("Support"), {{"brim_type", "",1},{"brim_width", "",2},{"brim_object_gap", "",3}, - {"enable_support", "",4},{"support_type", "",5},{"support_threshold_angle", "",6},{"support_on_build_plate_only", "",7}, + {"enable_support", "",4},{"support_type", "",5},{"support_threshold_angle", "",6}, {"support_threshold_overlap", "",6}, {"support_on_build_plate_only", "",7}, {"support_filament", "",8},{"support_interface_filament", "",9},{"support_expansion", "",24},{"support_style", "",25}, {"tree_support_brim_width", "",26}, {"tree_support_branch_angle", "",10},{"tree_support_branch_angle_organic","",10}, {"tree_support_wall_count", "",11},//tree support {"support_top_z_distance", "",13},{"support_bottom_z_distance", "",12},{"support_base_pattern", "",14},{"support_base_pattern_spacing", "",15}, @@ -150,7 +150,7 @@ std::vector SettingsFactory::get_visible_options(const std::s //Quality "layer_height", "initial_layer_print_height", "adaptive_layer_height", "seam_position", "xy_hole_compensation", "xy_contour_compensation", "elefant_foot_compensation", "support_line_width", //Support - "enable_support", "support_type", "support_threshold_angle", "support_on_build_plate_only", "support_critical_regions_only", "enforce_support_layers", + "enable_support", "support_type", "support_threshold_angle", "support_threshold_overlap", "support_on_build_plate_only", "support_critical_regions_only", "enforce_support_layers", //tree support "tree_support_wall_count", //support diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp index 7ec6d1b9762..8005d4ee6dd 100644 --- a/src/slic3r/GUI/Tab.cpp +++ b/src/slic3r/GUI/Tab.cpp @@ -2227,6 +2227,7 @@ void TabPrint::build() optgroup->append_single_option_line("support_type", "support#support-types"); optgroup->append_single_option_line("support_style", "support#support-styles"); optgroup->append_single_option_line("support_threshold_angle", "support#threshold-angle"); + optgroup->append_single_option_line("support_threshold_overlap", "support#threshold-angle"); optgroup->append_single_option_line("raft_first_layer_density"); optgroup->append_single_option_line("raft_first_layer_expansion"); optgroup->append_single_option_line("support_on_build_plate_only"); From 251887004fc806ee1568974cf7381a1f3b2ba314 Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Thu, 23 Jan 2025 15:10:15 +0100 Subject: [PATCH 2/4] Preventing nested zipping of the portable Windows build (#7950) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * Update build_orca.yml Preventing nested zipping of the portable Windows build. 😊 * Update build_orca.yml * uncommented lines 180-184 --- .github/workflows/build_orca.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.github/workflows/build_orca.yml b/.github/workflows/build_orca.yml index 87aacd88624..e417b3ef36c 100644 --- a/.github/workflows/build_orca.yml +++ b/.github/workflows/build_orca.yml @@ -194,7 +194,7 @@ jobs: uses: actions/upload-artifact@v4 with: name: OrcaSlicer_Windows_${{ env.ver }}_portable - path: ${{ github.workspace }}/build/OrcaSlicer_Windows_${{ env.ver }}_portable.zip + path: ${{ github.workspace }}/build/OrcaSlicer - name: Upload artifacts Win installer if: inputs.os == 'windows-latest' From 85e9d326608d7bc6fb7739377969cab8742a7ad3 Mon Sep 17 00:00:00 2001 From: Noisyfox Date: Thu, 23 Jan 2025 22:39:11 +0800 Subject: [PATCH 3/4] =?UTF-8?q?Fix=20issue=20`Preset=20name=20"0.20mm=20Sp?= =?UTF-8?q?eed=20@MK3S=200.4"=20was=20marked=20as=20renamed=E2=80=A6=20(#8?= =?UTF-8?q?156)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix issue `Preset name "0.20mm Speed @MK3S 0.4" was marked as renamed from "0.20mm Standard @MK3S", though preset name "0.20mm Detail @MK3S 0.6" was marked as renamed from "0.20mm Standard @MK3S" as well.` --- resources/profiles/Prusa/process/0.20mm Detail @MK3S 0.6.json | 1 - resources/profiles/Prusa/process/0.20mm Speed @MK3S 0.4.json | 1 - resources/profiles/Prusa/process/0.20mm Speed @MK3S.json | 1 - 3 files changed, 3 deletions(-) diff --git a/resources/profiles/Prusa/process/0.20mm Detail @MK3S 0.6.json b/resources/profiles/Prusa/process/0.20mm Detail @MK3S 0.6.json index 6fb6eb99bef..37cb00ae797 100644 --- a/resources/profiles/Prusa/process/0.20mm Detail @MK3S 0.6.json +++ b/resources/profiles/Prusa/process/0.20mm Detail @MK3S 0.6.json @@ -3,7 +3,6 @@ "print_settings_id": "0.20mm Detail @MK3S 0.6", "name": "0.20mm Detail @MK3S 0.6", "from": "system", - "renamed_from":"0.20mm Standard @MK3S", "instantiation": "true", "inherits": "process_common_mk3", "bottom_shell_layers": "4", diff --git a/resources/profiles/Prusa/process/0.20mm Speed @MK3S 0.4.json b/resources/profiles/Prusa/process/0.20mm Speed @MK3S 0.4.json index 73355f53c2c..7ae485dfef8 100644 --- a/resources/profiles/Prusa/process/0.20mm Speed @MK3S 0.4.json +++ b/resources/profiles/Prusa/process/0.20mm Speed @MK3S 0.4.json @@ -3,7 +3,6 @@ "print_settings_id": "0.20mm Speed @MK3S 0.4", "name": "0.20mm Speed @MK3S 0.4", "from": "system", - "renamed_from":"0.20mm Standard @MK3S", "instantiation": "true", "inherits": "process_common_mk3", "bottom_shell_layers": "4", diff --git a/resources/profiles/Prusa/process/0.20mm Speed @MK3S.json b/resources/profiles/Prusa/process/0.20mm Speed @MK3S.json index f3fbbe4cb1e..89f73c7a54f 100644 --- a/resources/profiles/Prusa/process/0.20mm Speed @MK3S.json +++ b/resources/profiles/Prusa/process/0.20mm Speed @MK3S.json @@ -3,7 +3,6 @@ "print_settings_id": "0.20mm Speed @MK3S", "name": "0.20mm Speed @MK3S", "from": "system", - "renamed_from":"0.20mm Standard @MK3S", "instantiation": "true", "inherits": "process_common_mk3", "bottom_shell_layers": "4", From ddef92ccd6fb1260c712d442272c67835a3e7a0d Mon Sep 17 00:00:00 2001 From: Thomas Date: Thu, 23 Jan 2025 16:51:53 +0100 Subject: [PATCH 4/4] Improvements and fixes for Creality K2 Plus (#8154) --- .../Creality Generic ABS @K2-all.json | 1 + .../Creality Generic ASA @K2-all.json | 1 + .../Creality Generic PA-CF @K2-all.json | 1 + .../Creality Generic PETG @K2-all.json | 1 + .../Creality Generic PLA @K2-all.json | 1 + .../Creality Generic TPU @K2-all.json | 1 + .../machine/Creality K2 Plus 0.2 nozzle.json | 16 +++++++++++---- .../machine/Creality K2 Plus 0.4 nozzle.json | 20 +++++++++++++------ .../machine/Creality K2 Plus 0.6 nozzle.json | 16 +++++++++++---- .../machine/Creality K2 Plus 0.8 nozzle.json | 18 ++++++++++++----- ...erDetail @Creality K2 Plus 0.2 nozzle.json | 1 + ...erDetail @Creality K2 Plus 0.4 nozzle.json | 1 + ...ghDetail @Creality K2 Plus 0.2 nozzle.json | 1 + ...m Detail @Creality K2 Plus 0.2 nozzle.json | 1 + ...m Detail @Creality K2 Plus 0.4 nozzle.json | 1 + ... Optimal @Creality K2 Plus 0.2 nozzle.json | 1 + ... Optimal @Creality K2 Plus 0.4 nozzle.json | 1 + ...m Detail @Creality K2 Plus 0.6 nozzle.json | 1 + ...Standard @Creality K2 Plus 0.4 nozzle.json | 1 + ...m Detail @Creality K2 Plus 0.8 nozzle.json | 1 + ...mm Draft @Creality K2 Plus 0.4 nozzle.json | 1 + ... Optimal @Creality K2 Plus 0.6 nozzle.json | 1 + ...perDraft @Creality K2 Plus 0.4 nozzle.json | 1 + ...Standard @Creality K2 Plus 0.6 nozzle.json | 1 + ... Optimal @Creality K2 Plus 0.8 nozzle.json | 1 + ...mm Draft @Creality K2 Plus 0.6 nozzle.json | 1 + ...Standard @Creality K2 Plus 0.8 nozzle.json | 1 + ...perDraft @Creality K2 Plus 0.6 nozzle.json | 1 + ...mm Draft @Creality K2 Plus 0.8 nozzle.json | 1 + ...perDraft @Creality K2 Plus 0.8 nozzle.json | 1 + 30 files changed, 77 insertions(+), 19 deletions(-) diff --git a/resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json b/resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json index 4a033b3780c..83007ba3cd9 100644 --- a/resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json +++ b/resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json @@ -17,6 +17,7 @@ "slow_down_min_speed": [ "20" ], + "filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"], "compatible_printers": [ "Creality K2 Plus 0.2 nozzle", "Creality K2 Plus 0.4 nozzle", diff --git a/resources/profiles/Creality/filament/Creality Generic ASA @K2-all.json b/resources/profiles/Creality/filament/Creality Generic ASA @K2-all.json index 8cb657bdd04..007ea2639d3 100644 --- a/resources/profiles/Creality/filament/Creality Generic ASA @K2-all.json +++ b/resources/profiles/Creality/filament/Creality Generic ASA @K2-all.json @@ -17,6 +17,7 @@ "slow_down_min_speed": [ "20" ], + "filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"], "compatible_printers": [ "Creality K2 Plus 0.2 nozzle", "Creality K2 Plus 0.4 nozzle", diff --git a/resources/profiles/Creality/filament/Creality Generic PA-CF @K2-all.json b/resources/profiles/Creality/filament/Creality Generic PA-CF @K2-all.json index 3e0963cc490..639109c4a5e 100644 --- a/resources/profiles/Creality/filament/Creality Generic PA-CF @K2-all.json +++ b/resources/profiles/Creality/filament/Creality Generic PA-CF @K2-all.json @@ -14,6 +14,7 @@ "fan_min_speed": [ "30" ], + "filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"], "compatible_printers": [ "Creality K2 Plus 0.2 nozzle", "Creality K2 Plus 0.4 nozzle", diff --git a/resources/profiles/Creality/filament/Creality Generic PETG @K2-all.json b/resources/profiles/Creality/filament/Creality Generic PETG @K2-all.json index efe3f28bb7f..c01d3e4f3f1 100644 --- a/resources/profiles/Creality/filament/Creality Generic PETG @K2-all.json +++ b/resources/profiles/Creality/filament/Creality Generic PETG @K2-all.json @@ -50,6 +50,7 @@ "reduce_fan_stop_start_freq": [ "1" ], + "filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"], "compatible_printers": [ "Creality K2 Plus 0.2 nozzle", "Creality K2 Plus 0.4 nozzle", diff --git a/resources/profiles/Creality/filament/Creality Generic PLA @K2-all.json b/resources/profiles/Creality/filament/Creality Generic PLA @K2-all.json index 472eef92212..3bbc824e962 100644 --- a/resources/profiles/Creality/filament/Creality Generic PLA @K2-all.json +++ b/resources/profiles/Creality/filament/Creality Generic PLA @K2-all.json @@ -44,6 +44,7 @@ "reduce_fan_stop_start_freq": [ "1" ], + "filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"], "compatible_printers": [ "Creality K2 Plus 0.2 nozzle", "Creality K2 Plus 0.4 nozzle", diff --git a/resources/profiles/Creality/filament/Creality Generic TPU @K2-all.json b/resources/profiles/Creality/filament/Creality Generic TPU @K2-all.json index 21b4e547a35..1c0d417cc12 100644 --- a/resources/profiles/Creality/filament/Creality Generic TPU @K2-all.json +++ b/resources/profiles/Creality/filament/Creality Generic TPU @K2-all.json @@ -32,6 +32,7 @@ "reduce_fan_stop_start_freq": [ "1" ], + "filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"], "compatible_printers": [ "Creality K2 Plus 0.2 nozzle", "Creality K2 Plus 0.4 nozzle", diff --git a/resources/profiles/Creality/machine/Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Plus 0.2 nozzle.json index dccdf656faf..533f565db2d 100644 --- a/resources/profiles/Creality/machine/Creality K2 Plus 0.2 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K2 Plus 0.2 nozzle.json @@ -20,9 +20,10 @@ ], "printable_height": "350", "nozzle_type": "hardened_steel", + "nozzle_volume": "183", "auxiliary_fan": "1", "support_air_filtration": "1", - "support_multi_bed_types": "0", + "support_multi_bed_types": "1", "machine_max_acceleration_e": [ "5000", "5000" @@ -91,7 +92,7 @@ ], "printer_settings_id": "Creality", "retraction_minimum_travel": [ - "2" + "1" ], "retract_before_wipe": [ "70%" @@ -108,7 +109,14 @@ "deretraction_speed": [ "40" ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "349" + ], "enable_filament_ramming": "0", + "purge_in_prime_tower": "0", "cooling_tube_length": "0", "cooling_tube_retraction": "0", "parking_pos_retraction": "0", @@ -127,12 +135,12 @@ "default_filament_profile": [ "Creality Generic PLA @K2-all" ], - "machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600", + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600", "machine_end_gcode": "END_PRINT", "machine_pause_gcode": "PAUSE", "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600", "scan_first_layer": "0", - "thumbnails_format":"PNG", + "thumbnails_format": "PNG", "thumbnails": [ "300x300", "96x96" diff --git a/resources/profiles/Creality/machine/Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Plus 0.4 nozzle.json index 0b86c46be82..74af66fff66 100644 --- a/resources/profiles/Creality/machine/Creality K2 Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K2 Plus 0.4 nozzle.json @@ -20,9 +20,10 @@ ], "printable_height": "350", "nozzle_type": "hardened_steel", + "nozzle_volume": "183", "auxiliary_fan": "1", "support_air_filtration": "1", - "support_multi_bed_types": "0", + "support_multi_bed_types": "1", "machine_max_acceleration_e": [ "5000", "5000" @@ -91,13 +92,13 @@ ], "printer_settings_id": "Creality", "retraction_minimum_travel": [ - "2" + "1" ], "retract_before_wipe": [ "70%" ], "retraction_length": [ - "0.5" + "0.8" ], "retract_length_toolchange": [ "0" @@ -108,7 +109,14 @@ "deretraction_speed": [ "40" ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "349" + ], "enable_filament_ramming": "0", + "purge_in_prime_tower": "0", "cooling_tube_length": "0", "cooling_tube_retraction": "0", "parking_pos_retraction": "0", @@ -120,19 +128,19 @@ "0.4" ], "wipe_distance": [ - "1" + "2" ], "single_extruder_multi_material": "1", "manual_filament_change": "0", "default_filament_profile": [ "Creality Generic PLA @K2-all" ], - "machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600", + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600", "machine_end_gcode": "END_PRINT", "machine_pause_gcode": "PAUSE", "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600", "scan_first_layer": "0", - "thumbnails_format":"PNG", + "thumbnails_format": "PNG", "thumbnails": [ "300x300", "96x96" diff --git a/resources/profiles/Creality/machine/Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Plus 0.6 nozzle.json index ab0c9db1648..0653905794d 100644 --- a/resources/profiles/Creality/machine/Creality K2 Plus 0.6 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K2 Plus 0.6 nozzle.json @@ -20,9 +20,10 @@ ], "printable_height": "350", "nozzle_type": "hardened_steel", + "nozzle_volume": "183", "auxiliary_fan": "1", "support_air_filtration": "1", - "support_multi_bed_types": "0", + "support_multi_bed_types": "1", "machine_max_acceleration_e": [ "5000", "5000" @@ -91,7 +92,7 @@ ], "printer_settings_id": "Creality", "retraction_minimum_travel": [ - "2" + "1" ], "retract_before_wipe": [ "70%" @@ -108,7 +109,14 @@ "deretraction_speed": [ "40" ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "349" + ], "enable_filament_ramming": "0", + "purge_in_prime_tower": "0", "cooling_tube_length": "0", "cooling_tube_retraction": "0", "parking_pos_retraction": "0", @@ -127,7 +135,7 @@ "default_filament_profile": [ "Creality Generic PLA @K2-all" ], - "machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600", + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600", "machine_end_gcode": "END_PRINT", "machine_pause_gcode": "PAUSE", "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600", @@ -137,4 +145,4 @@ "300x300", "96x96" ] -} +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Plus 0.8 nozzle.json index 72b061807aa..b4524040869 100644 --- a/resources/profiles/Creality/machine/Creality K2 Plus 0.8 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K2 Plus 0.8 nozzle.json @@ -20,9 +20,10 @@ ], "printable_height": "350", "nozzle_type": "hardened_steel", + "nozzle_volume": "183", "auxiliary_fan": "1", "support_air_filtration": "1", - "support_multi_bed_types": "0", + "support_multi_bed_types": "1", "machine_max_acceleration_e": [ "5000", "5000" @@ -91,7 +92,7 @@ ], "printer_settings_id": "Creality", "retraction_minimum_travel": [ - "2" + "1" ], "retract_before_wipe": [ "70%" @@ -108,7 +109,14 @@ "deretraction_speed": [ "40" ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "349" + ], "enable_filament_ramming": "0", + "purge_in_prime_tower": "0", "cooling_tube_length": "0", "cooling_tube_retraction": "0", "parking_pos_retraction": "0", @@ -127,14 +135,14 @@ "default_filament_profile": [ "Creality Generic PLA @K2-all" ], - "machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600", + "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600", "machine_end_gcode": "END_PRINT", "machine_pause_gcode": "PAUSE", "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600", "scan_first_layer": "0", - "thumbnails_format":"PNG", + "thumbnails_format": "PNG", "thumbnails": [ "300x300", "96x96" ] -} +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json index 37987434961..0aaf9296257 100644 --- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "30", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.25", "inner_wall_speed": "150", "wall_loops": "4", diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json index 7304c173ae0..ee060f244b7 100644 --- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "30", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.45", "inner_wall_speed": "350", "wall_loops": "2", diff --git a/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json index bffb09ca7c9..8a1fda49e03 100644 --- a/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "30", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.25", "inner_wall_speed": "150", "wall_loops": "4", diff --git a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json index 437d4c16e5d..edbd1dc827a 100644 --- a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "30", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.25", "inner_wall_speed": "150", "wall_loops": "4", diff --git a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json index 2f262bfaeaf..842b07347f8 100644 --- a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "30", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.45", "inner_wall_speed": "300", "wall_loops": "2", diff --git a/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json index 1525dd94f67..cb5884d099e 100644 --- a/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "30", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.25", "inner_wall_speed": "150", "wall_loops": "4", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json index 981862606fd..09af5140945 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "30", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.45", "inner_wall_speed": "300", "wall_loops": "2", diff --git a/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json index 4d42a50cbab..21399d932de 100644 --- a/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "20", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.65", "inner_wall_speed": "150", "wall_loops": "2", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json index b90fab60f87..d20935011dc 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "30", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.45", "inner_wall_speed": "300", "wall_loops": "2", diff --git a/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json index fc3ecfd1038..c953b04a2f9 100644 --- a/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "20", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.82", "inner_wall_speed": "150", "wall_loops": "2", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json index 55e401882c4..3220276e294 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "30", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.45", "inner_wall_speed": "300", "wall_loops": "2", diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json index c15220e405f..274783173bf 100644 --- a/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "20", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.65", "inner_wall_speed": "150", "wall_loops": "2", diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json index 9a2f65b23c7..c93d65bcc97 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "30", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.45", "inner_wall_speed": "200", "wall_loops": "2", diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json index 9efc66438c4..6207414767e 100644 --- a/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "20", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.65", "inner_wall_speed": "150", "wall_loops": "2", diff --git a/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json index 02f244ad2b6..eeeb7657107 100644 --- a/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "20", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.82", "inner_wall_speed": "150", "wall_loops": "2", diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json index e112eb39c0e..30de178e049 100644 --- a/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "20", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.65", "inner_wall_speed": "150", "wall_loops": "2", diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json index 26477340b04..593e1189404 100644 --- a/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "20", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.82", "inner_wall_speed": "150", "wall_loops": "2", diff --git a/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json index 4e9594ba20c..2b765d102f2 100644 --- a/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "20", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.65", "inner_wall_speed": "150", "wall_loops": "2", diff --git a/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json index c420d26892b..32090d39aae 100644 --- a/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "20", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.82", "inner_wall_speed": "150", "wall_loops": "2", diff --git a/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json index a463fef9692..6fe45f83d3c 100644 --- a/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json @@ -54,6 +54,7 @@ "overhang_3_4_speed": "20", "overhang_4_4_speed": "10", "only_one_wall_top": "1", + "precise_outer_wall": "1", "inner_wall_line_width": "0.82", "inner_wall_speed": "150", "wall_loops": "2",