Fix the spacing on the original english strings (#9596)
* Remove extra spaces between words * Remove extra spaces after punctuation * Remove extra spaces before punctuation * Always needs a space after punctuation * Always needs a space before parens * Remove trailing spaces before newline
This commit is contained in:
Alexandre Folle de Menezes
committed by
GitHub
GitHub
parent
b877fd96be
commit
cf71e4f2c7
@@ -67,7 +67,7 @@ void AMSSetting::create()
|
||||
|
||||
// tip line2
|
||||
m_tip_Insert_material_line2 = new Label(m_panel_Insert_material,
|
||||
_L("Note: if a new filament is inserted during printing, the AMS will not automatically read any information until printing is completed.")
|
||||
_L("Note: if a new filament is inserted during printing, the AMS will not automatically read any information until printing is completed.")
|
||||
);
|
||||
m_tip_Insert_material_line2->SetFont(::Label::Body_13);
|
||||
m_tip_Insert_material_line2->SetForegroundColour(AMS_SETTING_GREY700);
|
||||
@@ -114,7 +114,7 @@ void AMSSetting::create()
|
||||
m_sizer_starting_tip_inline = new wxBoxSizer(wxVERTICAL);
|
||||
|
||||
m_tip_starting_line1 = new Label(m_panel_body,
|
||||
_L("The AMS will automatically read the information of inserted filament on start-up. It will take about 1 minute.The reading process will roll filament spools.")
|
||||
_L("The AMS will automatically read the information of inserted filament on start-up. It will take about 1 minute. The reading process will roll the filament spools.")
|
||||
);
|
||||
m_tip_starting_line1->SetFont(::Label::Body_13);
|
||||
m_tip_starting_line1->SetForegroundColour(AMS_SETTING_GREY700);
|
||||
|
||||
@@ -913,7 +913,9 @@ AmsHumidityTipPopup::AmsHumidityTipPopup(wxWindow* parent)
|
||||
humidity_level_list = new AmsHumidityLevelList(this);
|
||||
curr_humidity_img = new wxStaticBitmap(this, wxID_ANY, create_scaled_bitmap("hum_level1_light", this, 132), wxDefaultPosition, wxSize(FromDIP(132), FromDIP(132)), 0);
|
||||
|
||||
m_staticText_note = new Label(this, _L("Please change the desiccant when it is too wet. The indicator may not represent accurately in following cases : when the lid is open or the desiccant pack is changed. it take hours to absorb the moisture, low temperatures also slow down the process."));
|
||||
m_staticText_note = new Label(this, _L("Please change the desiccant when it is too wet. "
|
||||
"The indicator may not represent accurately in following cases: when the lid is open or the desiccant pack is changed. "
|
||||
"It take hours to absorb the moisture, and low temperatures also slow down the process."));
|
||||
m_staticText_note->SetMinSize(wxSize(FromDIP(680), -1));
|
||||
m_staticText_note->SetMaxSize(wxSize(FromDIP(680), -1));
|
||||
m_staticText_note->Wrap(FromDIP(680));
|
||||
@@ -1432,7 +1434,8 @@ void AmsReplaceMaterialDialog::update_machine_obj(MachineObject* obj)
|
||||
label_txt->SetLabelText(_L("AMS filament backup is not enabled, please enable it in the AMS settings."));
|
||||
}
|
||||
else {
|
||||
label_txt->SetLabelText(_L("If there are two identical filaments in AMS, AMS filament backup will be enabled. \n(Currently supporting automatic supply of consumables with the same brand, material type, and color)"));
|
||||
label_txt->SetLabelText(_L("If there are two identical filaments in AMS, AMS filament backup will be enabled.\n"
|
||||
"(Currently supporting automatic supply of consumables with the same brand, material type, and color)"));
|
||||
}
|
||||
|
||||
label_txt->SetMinSize(wxSize(FromDIP(380), -1));
|
||||
|
||||
@@ -484,7 +484,9 @@ PingCodeBindDialog::~PingCodeBindDialog() {
|
||||
m_link_Terms_title->Wrap(FromDIP(450));
|
||||
m_link_Terms_title->SetForegroundColour(wxColour(0x009688));
|
||||
m_link_Terms_title->Bind(wxEVT_LEFT_DOWN, [this](auto& e) {
|
||||
wxString txt = _L("Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab device, please read the terms and conditions.By clicking to agree to use your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of Use(collectively, the \"Terms\"). If you do not comply with or agree to the Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services.");
|
||||
wxString txt = _L("Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab device, please read the terms and conditions. "
|
||||
"By clicking to agree to use your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of Use (collectively, the \"Terms\"). "
|
||||
"If you do not comply with or agree to the Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services.");
|
||||
ConfirmBeforeSendDialog confirm_dlg(this, wxID_ANY, _L("Terms and Conditions"), ConfirmBeforeSendDialog::ButtonStyle::ONLY_CONFIRM);
|
||||
confirm_dlg.update_text(txt);
|
||||
confirm_dlg.CenterOnParent();
|
||||
@@ -545,7 +547,15 @@ PingCodeBindDialog::~PingCodeBindDialog() {
|
||||
m_link_notice_title->Bind(wxEVT_ENTER_WINDOW, [this](auto& e) {SetCursor(wxCURSOR_HAND); });
|
||||
m_link_notice_title->Bind(wxEVT_LEAVE_WINDOW, [this](auto& e) {SetCursor(wxCURSOR_ARROW); });
|
||||
m_link_notice_title->Bind(wxEVT_LEFT_DOWN, [this](auto& e) {
|
||||
wxString txt = _L("In the 3D Printing community, we learn from each other's successes and failures to adjust our own slicing parameters and settings. %s follows the same principle and uses machine learning to improve its performance from the successes and failures of the vast number of prints by our users. We are training %s to be smarter by feeding them the real-world data. If you are willing, this service will access information from your error logs and usage logs, which may include information described in Privacy Policy. We will not collect any Personal Data by which an individual can be identified directly or indirectly, including without limitation names, addresses, payment information, or phone numbers. By enabling this service, you agree to these terms and the statement about Privacy Policy.");
|
||||
wxString txt = _L("In the 3D Printing community, we learn from each other's successes and failures to adjust "
|
||||
"our own slicing parameters and settings. %s follows the same principle and uses machine "
|
||||
"learning to improve its performance from the successes and failures of the vast number of "
|
||||
"prints by our users. We are training %s to be smarter by feeding them the real-world data. "
|
||||
"If you are willing, this service will access information from your error logs and usage "
|
||||
"logs, which may include information described in Privacy Policy. We will not collect any "
|
||||
"Personal Data by which an individual can be identified directly or indirectly, including "
|
||||
"without limitation names, addresses, payment information, or phone numbers. By enabling "
|
||||
"this service, you agree to these terms and the statement about Privacy Policy.");
|
||||
ConfirmBeforeSendDialog confirm_dlg(this, wxID_ANY, _L("Statement on User Experience Improvement Plan"), ConfirmBeforeSendDialog::ButtonStyle::ONLY_CONFIRM);
|
||||
|
||||
wxString model_id_text;
|
||||
|
||||
@@ -663,7 +663,7 @@ void PressureAdvanceWizard::on_cali_start()
|
||||
if (curr_obj->get_printer_series() != PrinterSeries::SERIES_X1 && curr_obj->pa_calib_tab.size() >= MAX_PA_HISTORY_RESULTS_NUMS) {
|
||||
MessageDialog msg_dlg(nullptr, wxString::Format(_L("This machine type can only hold 16 history results per nozzle. "
|
||||
"You can delete the existing historical results and then start calibration. "
|
||||
"Or you can continue the calibration, but you cannot create new calibration historical results. \n"
|
||||
"Or you can continue the calibration, but you cannot create new calibration historical results.\n"
|
||||
"Do you still want to continue the calibration?"), MAX_PA_HISTORY_RESULTS_NUMS), wxEmptyString, wxICON_WARNING | wxYES | wxCANCEL);
|
||||
if (msg_dlg.ShowModal() != wxID_YES) {
|
||||
return;
|
||||
|
||||
@@ -601,7 +601,7 @@ void CalibrationPresetPage::create_filament_list_panel(wxWindow* parent)
|
||||
{
|
||||
auto panel_sizer = new wxBoxSizer(wxVERTICAL);
|
||||
|
||||
m_filament_list_tips = new Label(parent, _L("Tips for calibration material: \n- Materials that can share same hot bed temperature\n- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)"));
|
||||
m_filament_list_tips = new Label(parent, _L("Tips for calibration material: \n- Materials that can share same hot bed temperature\n- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)"));
|
||||
m_filament_list_tips->Hide();
|
||||
m_filament_list_tips->SetFont(Label::Body_13);
|
||||
m_filament_list_tips->SetForegroundColour(wxColour(145, 145, 145));
|
||||
|
||||
@@ -160,7 +160,8 @@ void ConfigManipulation::check_chamber_temperature(DynamicPrintConfig* config)
|
||||
auto iter = recommend_temp_map.find(filament_type);
|
||||
if (iter!=recommend_temp_map.end()) {
|
||||
if (iter->second < config->option<ConfigOptionInts>("chamber_temperatures")->get_at(0)) {
|
||||
wxString msg_text = wxString::Format(_L("Current chamber temperature is higher than the material's safe temperature,it may result in material softening and clogging.The maximum safe temperature for the material is %d"), iter->second);
|
||||
wxString msg_text = wxString::Format(_L("Current chamber temperature is higher than the material's safe temperature, this may result in material softening and clogging. "
|
||||
"The maximum safe temperature for the material is %d"), iter->second);
|
||||
MessageDialog dialog(m_msg_dlg_parent, msg_text, "", wxICON_WARNING | wxOK);
|
||||
is_msg_dlg_already_exist = true;
|
||||
dialog.ShowModal();
|
||||
@@ -325,7 +326,7 @@ void ConfigManipulation::update_print_fff_config(DynamicPrintConfig* config, con
|
||||
wxString msg_text = _(L("Alternate extra wall does't work well when ensure vertical shell thickness is set to All."));
|
||||
|
||||
if (is_global_config)
|
||||
msg_text += "\n\n" + _(L("Change these settings automatically? \n"
|
||||
msg_text += "\n\n" + _(L("Change these settings automatically?\n"
|
||||
"Yes - Change ensure vertical shell thickness to Moderate and enable alternate extra wall\n"
|
||||
"No - Don't use alternate extra wall"));
|
||||
|
||||
@@ -877,7 +878,7 @@ int ConfigManipulation::show_spiral_mode_settings_dialog(bool is_object_config)
|
||||
msg_text += _(L(" But machines with I3 structure will not generate timelapse videos."));
|
||||
}
|
||||
if (!is_object_config)
|
||||
msg_text += "\n\n" + _(L("Change these settings automatically? \n"
|
||||
msg_text += "\n\n" + _(L("Change these settings automatically?\n"
|
||||
"Yes - Change these settings and enable spiral mode automatically\n"
|
||||
"No - Give up using spiral mode this time"));
|
||||
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
|
||||
namespace Slic3r { namespace GUI {
|
||||
ConnectPrinterDialog::ConnectPrinterDialog(wxWindow *parent, wxWindowID id, const wxString &title, const wxPoint &pos, const wxSize &size, long style)
|
||||
: DPIDialog(parent, id, _L("ConnectPrinter(LAN)"), pos, size, style)
|
||||
: DPIDialog(parent, id, _L("Connect Printer (LAN)"), pos, size, style)
|
||||
{
|
||||
SetBackgroundColour(*wxWHITE);
|
||||
this->SetSizeHints(wxDefaultSize, wxDefaultSize);
|
||||
|
||||
@@ -1123,8 +1123,8 @@ wxBoxSizer *CreateFilamentPresetDialog::create_button_item()
|
||||
PresetBundle *preset_bundle = wxGetApp().preset_bundle;
|
||||
if (preset_bundle->filaments.is_alias_exist(filament_preset_name)) {
|
||||
MessageDialog dlg(this,
|
||||
wxString::Format(_L("The Filament name %s you created already exists. \nIf you continue creating, the preset created will be displayed with its "
|
||||
"full name. Do you want to continue?"),
|
||||
wxString::Format(_L("The Filament name %s you created already exists.\n"
|
||||
"If you continue creating, the preset created will be displayed with its full name. Do you want to continue?"),
|
||||
from_u8(filament_preset_name)),
|
||||
wxString(SLIC3R_APP_FULL_NAME) + " - " + _L("Info"), wxYES_NO | wxYES_DEFAULT | wxCENTRE);
|
||||
if (wxID_YES != dlg.ShowModal()) { return; }
|
||||
@@ -1313,7 +1313,8 @@ void CreateFilamentPresetDialog::select_curr_radiobox(std::vector<std::pair<Radi
|
||||
m_filament_preset_combobox->SetLabelColor(DEFAULT_PROMPT_TEXT_COLOUR);
|
||||
}
|
||||
} else if (curr_selected_type == m_create_type.base_filament_preset) {
|
||||
m_filament_preset_text->SetLabel(_L("We would rename the presets as \"Vendor Type Serial @printer you selected\". \nTo add preset for more printers, Please go to printer selection"));
|
||||
m_filament_preset_text->SetLabel(_L("We would rename the presets as \"Vendor Type Serial @printer you selected\".\n"
|
||||
"To add preset for more printers, Please go to printer selection"));
|
||||
m_filament_preset_combobox->Hide();
|
||||
if (_L("Select Type") != m_filament_type_combobox->GetLabel()) {
|
||||
|
||||
@@ -3359,8 +3360,9 @@ CreatePresetSuccessfulDialog::CreatePresetSuccessfulDialog(wxWindow *parent, con
|
||||
success_text = new wxStaticText(this, wxID_ANY, _L("Filament Created"));
|
||||
wxString prompt_text = _L("Please go to filament setting to edit your presets if you need.\nPlease note that nozzle temperature, hot bed temperature, and maximum "
|
||||
"volumetric speed has a significant impact on printing quality. Please set them carefully.");
|
||||
wxString sync_text = sync_user_preset_need_enabled ? _L("\n\nOrca has detected that your user presets synchronization function is not enabled, which may result in unsuccessful Filament settings on "
|
||||
"the Device page. \nClick \"Sync user presets\" to enable the synchronization function.") : "";
|
||||
wxString sync_text = sync_user_preset_need_enabled ? _L("\n\nOrca has detected that your user presets synchronization function is not enabled, "
|
||||
"which may result in unsuccessful Filament settings on the Device page.\n"
|
||||
"Click \"Sync user presets\" to enable the synchronization function.") : "";
|
||||
next_step_text = new wxStaticText(this, wxID_ANY, prompt_text + sync_text);
|
||||
break;
|
||||
}
|
||||
@@ -3662,12 +3664,14 @@ wxBoxSizer *ExportConfigsDialog::create_export_config_item(wxWindow *parent)
|
||||
|
||||
radioBoxSizer->Add(create_radio_item(m_exprot_type.preset_bundle, parent, wxEmptyString, m_export_type_btns), 0, wxEXPAND | wxALL, 0);
|
||||
radioBoxSizer->Add(0, 0, 0, wxTOP, FromDIP(6));
|
||||
wxStaticText *static_export_printer_preset_bundle_text = new wxStaticText(parent, wxID_ANY, _L("Printer and all the filament&&process presets that belongs to the printer. \nCan be shared with others."), wxDefaultPosition, wxDefaultSize);
|
||||
wxStaticText *static_export_printer_preset_bundle_text = new wxStaticText(parent, wxID_ANY, _L("Printer and all the filament&&process presets that belongs to the printer.\n"
|
||||
"Can be shared with others."), wxDefaultPosition, wxDefaultSize);
|
||||
static_export_printer_preset_bundle_text->SetFont(Label::Body_12);
|
||||
static_export_printer_preset_bundle_text->SetForegroundColour(wxColour("#6B6B6B"));
|
||||
radioBoxSizer->Add(static_export_printer_preset_bundle_text, 0, wxEXPAND | wxLEFT, FromDIP(22));
|
||||
radioBoxSizer->Add(create_radio_item(m_exprot_type.filament_bundle, parent, wxEmptyString, m_export_type_btns), 0, wxEXPAND | wxTOP, FromDIP(10));
|
||||
wxStaticText *static_export_filament_preset_bundle_text = new wxStaticText(parent, wxID_ANY, _L("User's filament preset set. \nCan be shared with others."), wxDefaultPosition, wxDefaultSize);
|
||||
wxStaticText *static_export_filament_preset_bundle_text = new wxStaticText(parent, wxID_ANY, _L("User's filament preset set.\nCan be shared with others."),
|
||||
wxDefaultPosition, wxDefaultSize);
|
||||
static_export_filament_preset_bundle_text->SetFont(Label::Body_12);
|
||||
static_export_filament_preset_bundle_text->SetForegroundColour(wxColour("#6B6B6B"));
|
||||
radioBoxSizer->Add(static_export_filament_preset_bundle_text, 0, wxEXPAND | wxLEFT, FromDIP(22));
|
||||
@@ -4553,7 +4557,8 @@ void EditFilamentPresetDialog::delete_preset()
|
||||
}
|
||||
wxString msg;
|
||||
if (is_base_preset) {
|
||||
msg = _L("Are you sure to delete the selected preset? \nIf the preset corresponds to a filament currently in use on your printer, please reset the filament information for that slot.");
|
||||
msg = _L("Are you sure to delete the selected preset?\n"
|
||||
"If the preset corresponds to a filament currently in use on your printer, please reset the filament information for that slot.");
|
||||
} else {
|
||||
msg = _L("Are you sure to delete the selected preset?");
|
||||
}
|
||||
@@ -4759,7 +4764,9 @@ wxBoxSizer *EditFilamentPresetDialog::create_button_sizer()
|
||||
std::pair<wxColour, int>(*wxWHITE, StateColor::Normal));
|
||||
|
||||
m_del_filament_btn->Bind(wxEVT_BUTTON, ([this](wxCommandEvent &e) {
|
||||
WarningDialog dlg(this, _L("All the filament presets belong to this filament would be deleted. \nIf you are using this filament on your printer, please reset the filament information for that slot."), _L("Delete filament"), wxYES | wxCANCEL | wxCANCEL_DEFAULT | wxCENTRE);
|
||||
WarningDialog dlg(this, _L("All the filament presets belong to this filament would be deleted.\n"
|
||||
"If you are using this filament on your printer, please reset the filament information for that slot."),
|
||||
_L("Delete filament"), wxYES | wxCANCEL | wxCANCEL_DEFAULT | wxCENTRE);
|
||||
int res = dlg.ShowModal();
|
||||
if (wxID_YES == res) {
|
||||
PresetBundle *preset_bundle = wxGetApp().preset_bundle;
|
||||
|
||||
@@ -3088,7 +3088,8 @@ int MachineObject::parse_json(std::string payload, bool key_field_only)
|
||||
if (jj.contains("errno")) {
|
||||
if (jj["errno"].is_number()) {
|
||||
if (jj["errno"].get<int>() == -2) {
|
||||
wxString text = _L("The current chamber temperature or the target chamber temperature exceeds 45\u2103.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded.");
|
||||
wxString text = _L("The current chamber temperature or the target chamber temperature exceeds 45\u2103. "
|
||||
"In order to avoid extruder clogging, low temperature filament (PLA/PETG/TPU) is not allowed to be loaded.");
|
||||
GUI::wxGetApp().push_notification(text);
|
||||
}
|
||||
}
|
||||
@@ -3100,10 +3101,12 @@ int MachineObject::parse_json(std::string payload, bool key_field_only)
|
||||
if (jj["errno"].is_number()) {
|
||||
wxString text;
|
||||
if (jj["errno"].get<int>() == -2) {
|
||||
text = _L("Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to avoid extruder clogging,it is not allowed to set the chamber temperature above 45\u2103.");
|
||||
text = _L("Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. "
|
||||
"In order to avoid extruder clogging, it is not allowed to set the chamber temperature above 45\u2103.");
|
||||
}
|
||||
else if (jj["errno"].get<int>() == -4) {
|
||||
text = _L("When you set the chamber temperature below 40\u2103, the chamber temperature control will not be activated. And the target chamber temperature will automatically be set to 0\u2103.");
|
||||
text = _L("When you set the chamber temperature below 40\u2103, the chamber temperature control will not be activated. "
|
||||
"And the target chamber temperature will automatically be set to 0\u2103.");
|
||||
}
|
||||
if(!text.empty()){
|
||||
#if __WXOSX__
|
||||
@@ -6132,7 +6135,7 @@ void DeviceManager::check_filaments_in_blacklist(std::string tag_vendor, std::st
|
||||
{
|
||||
{"TPU: not supported", _L("TPU is not supported by AMS.")},
|
||||
{"Bambu PET-CF/PA6-CF: not supported", _L("Bambu PET-CF/PA6-CF is not supported by AMS.")},
|
||||
{"PVA: flexible", _L("Damp PVA will become flexible and get stuck inside AMS,please take care to dry it before use.")},
|
||||
{"PVA: flexible", _L("Damp PVA will become flexible and get stuck inside AMS, please take care to dry it before use.")},
|
||||
{"CF/GF: hard and brittle", _L("CF/GF filaments are hard and brittle, It's easy to break or get stuck in AMS, please use with caution.")}
|
||||
};
|
||||
|
||||
|
||||
@@ -737,7 +737,7 @@ static void generic_exception_handle()
|
||||
// and terminate the app so it is at least certain to happen now.
|
||||
BOOST_LOG_TRIVIAL(error) << boost::format("std::bad_alloc exception: %1%") % ex.what();
|
||||
flush_logs();
|
||||
wxString errmsg = wxString::Format(_L("OrcaSlicer will terminate because of running out of memory."
|
||||
wxString errmsg = wxString::Format(_L("OrcaSlicer will terminate because of running out of memory. "
|
||||
"It may be a bug. It will be appreciated if you report the issue to our team."));
|
||||
wxMessageBox(errmsg + "\n\n" + wxString(ex.what()), _L("Fatal error"), wxOK | wxICON_ERROR);
|
||||
|
||||
|
||||
@@ -567,7 +567,7 @@ wxMenu* MenuFactory::append_submenu_add_handy_model(wxMenu* menu, ModelVolumeTyp
|
||||
auto min_width_top_surface = m_config->option<ConfigOptionFloatOrPercent>("min_width_top_surface")->value;
|
||||
if (is_only_one_wall_top && min_width_top_surface > 0) {
|
||||
wxString msg_text = _L("This model features text embossment on the top surface. For optimal results, it is "
|
||||
"advisable to set the 'One Wall Threshold(min_width_top_surface)' "
|
||||
"advisable to set the 'One Wall Threshold (min_width_top_surface)' "
|
||||
"to 0 for the 'Only One Wall on Top Surfaces' to work best.\n"
|
||||
"Yes - Change these settings automatically\n"
|
||||
"No - Do not change these settings for me");
|
||||
|
||||
@@ -2462,7 +2462,7 @@ bool ObjectList::del_from_cut_object(bool is_cut_connector, bool is_model_part/*
|
||||
|
||||
InfoDialog dialog(wxGetApp().plater(), title,
|
||||
(_L("This action will break a cut correspondence.\n"
|
||||
"After that model consistency can't be guaranteed .\n"
|
||||
"After that model consistency can't be guaranteed.\n"
|
||||
"\n"
|
||||
"To manipulate with solid parts or negative volumes you have to invalidate cut information first.") + msg_end ),
|
||||
false, buttons_style | wxCANCEL_DEFAULT | wxICON_WARNING);
|
||||
|
||||
@@ -739,7 +739,7 @@ void GLGizmoBrimEars::on_render_input_window(float x, float y, float bottom_limi
|
||||
ImColor HyperColor = ImGuiWrapper::COL_ORCA;
|
||||
ImGui::PushStyleColor(ImGuiCol_Text, ImGuiWrapper::to_ImVec4(ColorRGB::WARNING()));
|
||||
float parent_width = ImGui::GetContentRegionAvail().x;
|
||||
m_imgui->text_wrapped(_L("Warning: The brim type is not set to \"painted\",the brim ears will not take effect !"), parent_width);
|
||||
m_imgui->text_wrapped(_L("Warning: The brim type is not set to \"painted\", the brim ears will not take effect!"), parent_width);
|
||||
ImGui::PopStyleColor();
|
||||
ImGui::PushStyleColor(ImGuiCol_Text, HyperColor.Value);
|
||||
ImGui::Dummy(ImVec2(font_size * 1.8, font_size * 1.3));
|
||||
|
||||
@@ -1911,7 +1911,7 @@ void GLGizmoEmboss::draw_model_type()
|
||||
void GLGizmoEmboss::draw_style_rename_popup() {
|
||||
std::string& new_name = m_style_manager.get_style().name;
|
||||
const std::string &old_name = m_style_manager.get_stored_style()->name;
|
||||
std::string text_in_popup = GUI::format(_L("Rename style(%1%) for embossing text"), old_name) + ": ";
|
||||
std::string text_in_popup = GUI::format(_L("Rename style (%1%) for embossing text"), old_name) + ": ";
|
||||
ImGui::Text("%s", text_in_popup.c_str());
|
||||
|
||||
bool is_unique = (new_name == old_name) || // could be same as before rename
|
||||
@@ -3116,8 +3116,8 @@ void GLGizmoEmboss::create_notification_not_valid_font(
|
||||
}
|
||||
const std::string &face_name = face_name_opt.value_or(face_name_by_wx.value_or(es.path));
|
||||
std::string text =
|
||||
GUI::format(_L("Can't load exactly same font(\"%1%\"). "
|
||||
"Application selected a similar one(\"%2%\"). "
|
||||
GUI::format(_L("Can't load exactly same font (\"%1%\"). "
|
||||
"Application selected a similar one (\"%2%\"). "
|
||||
"You have to specify font for enable edit text."),
|
||||
face_name_3mf, face_name);
|
||||
create_notification_not_valid_font(text);
|
||||
|
||||
@@ -1902,14 +1902,14 @@ void GLGizmoMeasure::show_selection_ui()
|
||||
if (m_selected_wrong_feature_waring_tip) {
|
||||
if (m_measure_mode == EMeasureMode::ONLY_ASSEMBLY) {
|
||||
if (m_assembly_mode == AssemblyMode::FACE_FACE) {
|
||||
m_imgui->warning_text(_L("Warning:please select Plane's feature."));
|
||||
m_imgui->warning_text(_L("Warning: please select Plane's feature."));
|
||||
} else if (m_assembly_mode == AssemblyMode::POINT_POINT) {
|
||||
m_imgui->warning_text(_L("Warning:please select Point's or Circle's feature."));
|
||||
m_imgui->warning_text(_L("Warning: please select Point's or Circle's feature."));
|
||||
}
|
||||
}
|
||||
}
|
||||
if (m_measure_mode == EMeasureMode::ONLY_ASSEMBLY && m_hit_different_volumes.size() == 1) {
|
||||
m_imgui->warning_text(_L("Warning:please select two different mesh."));
|
||||
m_imgui->warning_text(_L("Warning: please select two different meshes."));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@@ -290,7 +290,7 @@ void KBShortcutsDialog::fill_shortcuts()
|
||||
|
||||
Shortcuts object_list_shortcuts = {
|
||||
{"1-9", L("Set extruder number for the objects and parts") },
|
||||
{L("Del"), L("Delete objects, parts, modifiers ")},
|
||||
{L("Del"), L("Delete objects, parts, modifiers")},
|
||||
{L("Esc"), L("Deselect all")},
|
||||
{ctrl + "C", L("Copy to clipboard")},
|
||||
{ctrl + "V", L("Paste from clipboard")},
|
||||
|
||||
@@ -3921,7 +3921,7 @@ void MainFrame::update_side_preset_ui()
|
||||
void MainFrame::on_select_default_preset(SimpleEvent& evt)
|
||||
{
|
||||
MessageDialog dialog(this,
|
||||
_L("Do you want to synchronize your personal data from Bambu Cloud? \n"
|
||||
_L("Do you want to synchronize your personal data from Bambu Cloud?\n"
|
||||
"It contains the following information:\n"
|
||||
"1. The Process presets\n"
|
||||
"2. The Filament presets\n"
|
||||
|
||||
@@ -577,7 +577,8 @@ void MediaFilePanel::doAction(size_t index, int action)
|
||||
wxPostEvent(Slic3r::GUI::wxGetApp().plater(), SimpleEvent(EVT_PRINT_FROM_SDCARD_VIEW));
|
||||
}
|
||||
else {
|
||||
MessageDialog dlg(this, _L("The .gcode.3mf file contains no G-code data.Please slice it with Orca Slicer and export a new .gcode.3mf file."), wxEmptyString, wxICON_WARNING | wxOK);
|
||||
MessageDialog dlg(this, _L("The .gcode.3mf file contains no G-code data. Please slice it with Orca Slicer and export a new .gcode.3mf file."),
|
||||
wxEmptyString, wxICON_WARNING | wxOK);
|
||||
auto res = dlg.ShowModal();
|
||||
}
|
||||
|
||||
|
||||
@@ -579,7 +579,7 @@ wxBoxSizer *Newer3mfVersionDialog::get_msg_sizer()
|
||||
wxBoxSizer * horizontal_sizer = new wxBoxSizer(wxHORIZONTAL);
|
||||
wxString msg_str;
|
||||
if (file_version_newer) {
|
||||
text1 = new wxStaticText(this, wxID_ANY, _L("The 3mf file version is in Beta and it is newer than the current OrcaSlicer version."));
|
||||
text1 = new wxStaticText(this, wxID_ANY, _L("The 3mf file version is in Beta and it is newer than the current OrcaSlicer version."));
|
||||
wxStaticText * text2 = new wxStaticText(this, wxID_ANY, _L("If you would like to try Orca Slicer Beta, you may click to"));
|
||||
wxHyperlinkCtrl *github_link = new wxHyperlinkCtrl(this, wxID_ANY, _L("Download Beta Version"), "https://github.com/bambulab/BambuStudio/releases");
|
||||
horizontal_sizer->Add(text2, 0, wxEXPAND, 0);
|
||||
|
||||
@@ -139,11 +139,11 @@ wxBoxSizer* NetworkTestDialog::create_content_sizer(wxWindow* parent)
|
||||
grid_sizer->SetNonFlexibleGrowMode(wxFLEX_GROWMODE_SPECIFIED);
|
||||
|
||||
StateColor btn_bg(std::pair<wxColour, int>(wxColour(0, 137, 123), StateColor::Pressed),std::pair<wxColour, int>(wxColour(38, 166, 154), StateColor::Hovered), std::pair<wxColour, int>(wxColour(255,255,255), StateColor::Enabled));
|
||||
btn_link = new Button(this, _L("Test OrcaSlicer(GitHub)"));
|
||||
btn_link = new Button(this, _L("Test OrcaSlicer (GitHub)"));
|
||||
btn_link->SetBackgroundColor(btn_bg);
|
||||
grid_sizer->Add(btn_link, 0, wxEXPAND | wxALL, 5);
|
||||
|
||||
text_link_title = new wxStaticText(this, wxID_ANY, _L("Test OrcaSlicer(GitHub):"), wxDefaultPosition, wxDefaultSize, 0);
|
||||
text_link_title = new wxStaticText(this, wxID_ANY, _L("Test OrcaSlicer (GitHub):"), wxDefaultPosition, wxDefaultSize, 0);
|
||||
text_link_title->Wrap(-1);
|
||||
grid_sizer->Add(text_link_title, 0, wxALIGN_RIGHT | wxALL, 5);
|
||||
|
||||
@@ -151,7 +151,7 @@ wxBoxSizer* NetworkTestDialog::create_content_sizer(wxWindow* parent)
|
||||
text_link_val->Wrap(-1);
|
||||
grid_sizer->Add(text_link_val, 0, wxALL, 5);
|
||||
|
||||
btn_bing = new Button(this, _L("Test Bing.com"));
|
||||
btn_bing = new Button(this, _L("Test bing.com"));
|
||||
btn_bing->SetBackgroundColor(btn_bg);
|
||||
grid_sizer->Add(btn_bing, 0, wxEXPAND | wxALL, 5);
|
||||
|
||||
|
||||
@@ -2932,7 +2932,8 @@ void NotificationManager::bbl_show_app_newversion_notification()
|
||||
|
||||
void NotificationManager::bbl_show_need_support_on_notification()
|
||||
{
|
||||
NotificationData data{NotificationType::BBLNeedSupportON, NotificationLevel::WarningNotificationLevel, 0,_u8L("Warning:") + "\n" + _u8L("Your model needs support ! Please make support material enable.")};
|
||||
NotificationData data{NotificationType::BBLNeedSupportON, NotificationLevel::WarningNotificationLevel, 0,
|
||||
_u8L("Warning:") + "\n" + _u8L("Your model needs support! Please enable support material.")};
|
||||
|
||||
for (std::unique_ptr<PopNotification> ¬ification : m_pop_notifications) {
|
||||
if (notification->get_type() == NotificationType::BBLNeedSupportON) {
|
||||
|
||||
@@ -722,7 +722,7 @@ void ObjColorPanel::deal_default_strategy()
|
||||
{
|
||||
deal_add_btn();
|
||||
deal_approximate_match_btn();
|
||||
m_warning_text->SetLabelText(_L("Note:The color has been selected, you can choose OK \n to continue or manually adjust it."));
|
||||
m_warning_text->SetLabelText(_L("Note: The color has been selected, you can choose OK \nto continue or manually adjust it."));
|
||||
}
|
||||
|
||||
void ObjColorPanel::deal_add_btn()
|
||||
@@ -760,7 +760,7 @@ void ObjColorPanel::deal_add_btn()
|
||||
}
|
||||
if (is_exceed) {
|
||||
deal_approximate_match_btn();
|
||||
m_warning_text->SetLabelText(_L("Waring:The count of newly added and \n current extruders exceeds 16."));
|
||||
m_warning_text->SetLabelText(_L("Warning: The count of newly added and \ncurrent extruders exceeds 16."));
|
||||
}
|
||||
m_is_add_filament = true;
|
||||
}
|
||||
|
||||
@@ -3225,12 +3225,12 @@ Plater::priv::priv(Plater *q, MainFrame *main_frame)
|
||||
notification_manager->close_notification_of_type(NotificationType::ExportFinished);
|
||||
notification_manager->push_notification(NotificationType::CustomNotification,
|
||||
NotificationManager::NotificationLevel::RegularNotificationLevel,
|
||||
format(_L("Successfully unmounted. The device %s(%s) can now be safely removed from the computer."), evt.data.first.name, evt.data.first.path)
|
||||
format(_L("Successfully unmounted. The device %s (%s) can now be safely removed from the computer."), evt.data.first.name, evt.data.first.path)
|
||||
);
|
||||
} else {
|
||||
notification_manager->push_notification(NotificationType::CustomNotification,
|
||||
NotificationManager::NotificationLevel::ErrorNotificationLevel,
|
||||
format(_L("Ejecting of device %s(%s) has failed."), evt.data.first.name, evt.data.first.path)
|
||||
format(_L("Ejecting of device %s (%s) has failed."), evt.data.first.name, evt.data.first.path)
|
||||
);
|
||||
}
|
||||
});
|
||||
@@ -9291,7 +9291,7 @@ void Plater::import_model_id(wxString download_info)
|
||||
}
|
||||
|
||||
|
||||
msg = _L("downloading project ...");
|
||||
msg = _L("downloading project...");
|
||||
|
||||
//target_path = wxStandardPaths::Get().GetTempDir().utf8_str().data();
|
||||
|
||||
@@ -14636,7 +14636,7 @@ void Plater::post_process_string_object_exception(StringObjectException &err)
|
||||
break;
|
||||
}
|
||||
}
|
||||
err.string = format(_L("Plate %d: %s is not suggested to be used to print filament %s(%s). "
|
||||
err.string = format(_L("Plate %d: %s is not suggested to be used to print filament %s (%s). "
|
||||
"If you still want to do this print job, please set this filament's bed temperature to non-zero."),
|
||||
err.params[0], err.params[1], err.params[2], filament_name);
|
||||
err.string += "\n";
|
||||
|
||||
@@ -1230,11 +1230,11 @@ wxWindow* PreferencesDialog::create_general_page()
|
||||
auto item_calc_in_long_retract = create_item_checkbox(_L("Flushing volumes: Auto-calculate every time when the filament is changed."), page, _L("If enabled, auto-calculate every time when filament is changed"), 50, "auto_calculate_when_filament_change");
|
||||
auto item_remember_printer_config = create_item_checkbox(_L("Remember printer configuration"), page, _L("If enabled, Orca will remember and switch filament/process configuration for each printer automatically."), 50, "remember_printer_config");
|
||||
auto item_step_mesh_setting = create_item_checkbox(_L("Show the step mesh parameter setting dialog."), page, _L("If enabled,a parameter settings dialog will appear during STEP file import."), 50, "enable_step_mesh_setting");
|
||||
auto item_multi_machine = create_item_checkbox(_L("Multi-device Management(Take effect after restarting Orca)."), page, _L("With this option enabled, you can send a task to multiple devices at the same time and manage multiple devices."), 50, "enable_multi_machine");
|
||||
auto item_multi_machine = create_item_checkbox(_L("Multi-device Management (Take effect after restarting Orca Slicer)."), page, _L("With this option enabled, you can send a task to multiple devices at the same time and manage multiple devices."), 50, "enable_multi_machine");
|
||||
auto item_auto_arrange = create_item_checkbox(_L("Auto arrange plate after cloning"), page, _L("Auto arrange plate after object cloning"), 50, "auto_arrange");
|
||||
auto title_presets = create_item_title(_L("Presets"), page, _L("Presets"));
|
||||
auto title_network = create_item_title(_L("Network"), page, _L("Network"));
|
||||
auto item_user_sync = create_item_checkbox(_L("Auto sync user presets(Printer/Filament/Process)"), page, _L("User Sync"), 50, "sync_user_preset");
|
||||
auto item_user_sync = create_item_checkbox(_L("Auto sync user presets (Printer/Filament/Process)"), page, _L("User Sync"), 50, "sync_user_preset");
|
||||
auto item_system_sync = create_item_checkbox(_L("Update built-in Presets automatically."), page, _L("System Sync"), 50, "sync_system_preset");
|
||||
auto item_save_presets = create_item_button(_L("Clear my choice on the unsaved presets."), _L("Clear"), page, L"", _L("Clear my choice on the unsaved presets."), []() {
|
||||
wxGetApp().app_config->set("save_preset_choise", "");
|
||||
|
||||
@@ -1103,7 +1103,7 @@ void PlaterPresetComboBox::update()
|
||||
else if (m_type == Preset::TYPE_SLA_MATERIAL)
|
||||
set_label_marker(Append(separator(L("Add/Remove materials")), *bmp), LABEL_ITEM_WIZARD_MATERIALS);
|
||||
else {
|
||||
set_label_marker(Append(separator(L("Select/Remove printers(system presets)")), *bmp), LABEL_ITEM_WIZARD_PRINTERS);
|
||||
set_label_marker(Append(separator(L("Select/Remove printers (system presets)")), *bmp), LABEL_ITEM_WIZARD_PRINTERS);
|
||||
set_label_marker(Append(separator(L("Create printer")), *bmp), LABEL_ITEM_WIZARD_ADD_PRINTERS);
|
||||
}
|
||||
}
|
||||
|
||||
@@ -24,7 +24,7 @@ static wxString PUBLISH_STEP_STRING[STEP_COUNT] = {
|
||||
_L("Jump to model publish web page")
|
||||
};
|
||||
|
||||
static wxString NOTE_STRING = _L("Note: The preparation may takes several minutes. Please be patient.");
|
||||
static wxString NOTE_STRING = _L("Note: The preparation may take several minutes. Please be patient.");
|
||||
|
||||
PublishDialog::PublishDialog(Plater *plater)
|
||||
: DPIDialog(static_cast<wxWindow *>(wxGetApp().mainframe), wxID_ANY, _L("Publish"), wxDefaultPosition, wxDefaultSize, wxCAPTION | wxCLOSE_BOX)
|
||||
|
||||
@@ -102,7 +102,7 @@ void ReleaseNoteDialog::on_dpi_changed(const wxRect &suggested_rect)
|
||||
|
||||
void ReleaseNoteDialog::update_release_note(wxString release_note, std::string version)
|
||||
{
|
||||
m_text_up_info->SetLabel(wxString::Format(_L("version %s update information :"), version));
|
||||
m_text_up_info->SetLabel(wxString::Format(_L("version %s update information:"), version));
|
||||
wxBoxSizer * sizer_text_release_note = new wxBoxSizer(wxVERTICAL);
|
||||
auto m_staticText_release_note = new ::Label(m_vebview_release_note, release_note, LB_AUTO_WRAP);
|
||||
m_staticText_release_note->SetMinSize(wxSize(FromDIP(530), -1));
|
||||
@@ -239,7 +239,7 @@ void UpdatePluginDialog::update_info(std::string json_path)
|
||||
version = from_u8(version_str);
|
||||
description = from_u8(description_str);
|
||||
|
||||
m_text_up_info->SetLabel(wxString::Format(_L("A new Network plug-in(%s) available, Do you want to install it?"), version));
|
||||
m_text_up_info->SetLabel(wxString::Format(_L("A new Network plug-in (%s) available, Do you want to install it?"), version));
|
||||
m_text_up_info->SetMinSize(wxSize(FromDIP(260), -1));
|
||||
m_text_up_info->SetMaxSize(wxSize(FromDIP(260), -1));
|
||||
wxBoxSizer* sizer_text_release_note = new wxBoxSizer(wxVERTICAL);
|
||||
@@ -1090,14 +1090,14 @@ void PrintErrorDialog::init_button_list()
|
||||
e.Skip();
|
||||
});
|
||||
|
||||
init_button(RESUME_PRINTING_DEFECTS, _L("Resume Printing(defects acceptable)"));
|
||||
init_button(RESUME_PRINTING_DEFECTS, _L("Resume Printing (defects acceptable)"));
|
||||
m_button_list[RESUME_PRINTING_DEFECTS]->Bind(wxEVT_LEFT_DOWN, [this](wxMouseEvent& e) {
|
||||
post_event(wxCommandEvent(EVT_SECONDARY_CHECK_RESUME));
|
||||
e.Skip();
|
||||
});
|
||||
|
||||
|
||||
init_button(RESUME_PRINTING_PROBELM_SOLVED, _L("Resume Printing(problem solved)"));
|
||||
init_button(RESUME_PRINTING_PROBELM_SOLVED, _L("Resume Printing (problem solved)"));
|
||||
m_button_list[RESUME_PRINTING_PROBELM_SOLVED]->Bind(wxEVT_LEFT_DOWN, [this](wxMouseEvent& e) {
|
||||
post_event(wxCommandEvent(EVT_SECONDARY_CHECK_RESUME));
|
||||
e.Skip();
|
||||
|
||||
@@ -2581,7 +2581,7 @@ void SelectMachineDialog::on_ok_btn(wxCommandEvent &event)
|
||||
is_printing_block = true;
|
||||
nozzle_diameter = wxString::Format("%.1f", obj_->nozzle_diameter).ToStdString();
|
||||
|
||||
wxString nozzle_in_preset = wxString::Format(_L("Printing high temperature material(%s material) with %s may cause nozzle damage"), filament_type, format_steel_name(obj_->nozzle_type));
|
||||
wxString nozzle_in_preset = wxString::Format(_L("Printing high temperature material (%s material) with %s may cause nozzle damage"), filament_type, format_steel_name(obj_->nozzle_type));
|
||||
confirm_text.push_back(ConfirmBeforeSendInfo(nozzle_in_preset, ConfirmBeforeSendInfo::InfoLevel::Warning));
|
||||
}
|
||||
}
|
||||
|
||||
@@ -1314,8 +1314,8 @@ wxPanel* SendMultiMachinePage::create_page()
|
||||
|
||||
// add send option
|
||||
wxBoxSizer* title_send_option = create_item_title(_L("Send Options"), main_page, "");
|
||||
wxBoxSizer* max_printer_send = create_item_input(_L("Send to"), _L("printers at the same time.(It depends on how many devices can undergo heating at the same time.)"), main_page, "", "max_send");
|
||||
wxBoxSizer* delay_time = create_item_input(_L("Wait"), _L("minute each batch.(It depends on how long it takes to complete the heating.)"), main_page, "", "sending_interval");
|
||||
wxBoxSizer* max_printer_send = create_item_input(_L("Send to"), _L("printers at the same time. (It depends on how many devices can undergo heating at the same time.)"), main_page, "", "max_send");
|
||||
wxBoxSizer* delay_time = create_item_input(_L("Wait"), _L("minute each batch. (It depends on how long it takes to complete the heating.)"), main_page, "", "sending_interval");
|
||||
sizer->Add(title_send_option, 0, wxEXPAND, 0);
|
||||
sizer->Add(max_printer_send, 0, wxLEFT, FromDIP(20));
|
||||
sizer->AddSpacer(FromDIP(3));
|
||||
|
||||
@@ -5063,7 +5063,7 @@ wxBoxSizer *ScoreDialog::get_main_sizer(const std::vector<std::pair<wxString, st
|
||||
m_main_sizer->Add(m_line_top, 0, wxEXPAND, 0);
|
||||
m_main_sizer->Add(0, 0, 0, wxTOP, FromDIP(32));
|
||||
|
||||
warning_text = new wxStaticText(this, wxID_ANY, _L("At least one successful print record of this print profile is required \nto give a positive rating(4 or 5stars)."));
|
||||
warning_text = new wxStaticText(this, wxID_ANY, _L("At least one successful print record of this print profile is required \nto give a positive rating (4 or 5 stars)."));
|
||||
warning_text->SetForegroundColour(*wxRED);
|
||||
warning_text->SetFont(::Label::Body_13);
|
||||
|
||||
|
||||
@@ -1558,7 +1558,7 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
|
||||
m_config->opt_enum<SupportMaterialInterfacePattern>("support_interface_pattern") == SupportMaterialInterfacePattern::smipRectilinearInterlaced)) {
|
||||
wxString msg_text = _L("When using support material for the support interface, We recommend the following settings:\n"
|
||||
"0 top z distance, 0 interface spacing, interlaced rectilinear pattern and disable independent support layer height");
|
||||
msg_text += "\n\n" + _L("Change these settings automatically? \n"
|
||||
msg_text += "\n\n" + _L("Change these settings automatically?\n"
|
||||
"Yes - Change these settings automatically\n"
|
||||
"No - Do not change these settings for me");
|
||||
MessageDialog dialog(wxGetApp().plater(), msg_text, "Suggestion", wxICON_WARNING | wxYES | wxNO);
|
||||
@@ -1613,7 +1613,7 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
|
||||
} else {
|
||||
wxString msg_text = _(L("Layer height exceeds the limit in Printer Settings -> Extruder -> Layer height limits, "
|
||||
"this may cause printing quality issues."));
|
||||
msg_text += "\n\n" + _(L("Adjust to the set range automatically? \n"));
|
||||
msg_text += "\n\n" + _(L("Adjust to the set range automatically?\n"));
|
||||
MessageDialog dialog(wxGetApp().plater(), msg_text, "", wxICON_WARNING | wxYES | wxNO);
|
||||
dialog.SetButtonLabel(wxID_YES, _L("Adjust"));
|
||||
dialog.SetButtonLabel(wxID_NO, _L("Ignore"));
|
||||
@@ -1650,8 +1650,8 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
|
||||
unsigned char activate = boost::any_cast<unsigned char>(value);
|
||||
if (activate == 1) {
|
||||
MessageDialog dialog(wxGetApp().plater(),
|
||||
_L("Experimental feature: Retracting and cutting off the filament at a greater distance during filament changes to minimize flush."
|
||||
"Although it can notably reduce flush, it may also elevate the risk of nozzle clogs or other printing complications."), "", wxICON_WARNING | wxOK);
|
||||
_L("Experimental feature: Retracting and cutting off the filament at a greater distance during filament changes to minimize flush. "
|
||||
"Although it can notably reduce flush, it may also elevate the risk of nozzle clogs or other printing complications."), "", wxICON_WARNING | wxOK);
|
||||
dialog.ShowModal();
|
||||
}
|
||||
}
|
||||
@@ -1660,8 +1660,9 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
|
||||
unsigned char activate = boost::any_cast<unsigned char>(value);
|
||||
if (activate == 1) {
|
||||
MessageDialog dialog(wxGetApp().plater(),
|
||||
_L("Experimental feature: Retracting and cutting off the filament at a greater distance during filament changes to minimize flush."
|
||||
"Although it can notably reduce flush, it may also elevate the risk of nozzle clogs or other printing complications.Please use with the latest printer firmware."), "", wxICON_WARNING | wxOK);
|
||||
_L("Experimental feature: Retracting and cutting off the filament at a greater distance during filament changes to minimize flush. "
|
||||
"Although it can notably reduce flush, it may also elevate the risk of nozzle clogs or other printing complications. "
|
||||
"Please use with the latest printer firmware."), "", wxICON_WARNING | wxOK);
|
||||
dialog.ShowModal();
|
||||
}
|
||||
}
|
||||
|
||||
@@ -186,7 +186,7 @@ void wxMediaCtrl2::Load(wxURI url)
|
||||
|
||||
if (!hasplugins) {
|
||||
CallAfter([] {
|
||||
wxMessageBox(_L("Your system is missing H.264 codecs for GStreamer, which are required to play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-libav packages, then restart Orca Slicer?)"), _L("Error"), wxOK);
|
||||
wxMessageBox(_L("Your system is missing H.264 codecs for GStreamer, which are required to play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-libav packages, then restart Orca Slicer?)"), _L("Error"), wxOK);
|
||||
});
|
||||
m_error = 101;
|
||||
wxMediaEvent event(wxEVT_MEDIA_STATECHANGED);
|
||||
|
||||
Reference in New Issue
Block a user