diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json
index 8fc3fb8f7d7..102c5b3f6bf 100644
--- a/resources/profiles/Snapmaker.json
+++ b/resources/profiles/Snapmaker.json
@@ -1,6 +1,6 @@
 {
     "name": "Snapmaker",
-    "version":  "02.03.00.03",
+    "version": "02.03.00.05",
     "force_update": "0",
     "description": "Snapmaker configurations",
     "machine_model_list": [
@@ -75,292 +75,388 @@
         {
             "name": "Snapmaker Artisan",
             "sub_path": "machine/Snapmaker Artisan.json"
+        },
+        {
+            "name": "Snapmaker U1",
+            "sub_path": "machine/Snapmaker U1.json"
         }
     ],
     "process_list": [
+        {
+            "name": "fdm_process_U1",
+            "sub_path": "process/fdm_process_U1.json"
+        },
         {
             "name": "fdm_process_common",
             "sub_path": "process/fdm_process_common.json"
         },
         {
-            "name": "fdm_process_idex",
-            "sub_path": "process/fdm_process_idex.json"
+            "name": "0.25 Benchy @Snapmaker U1 (0.4 nozzle)",
+            "sub_path": "process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json"
         },
         {
-            "name": "fdm_process_a400",
-            "sub_path": "process/fdm_process_a400.json"
+            "name": "fdm_process_U1_common",
+            "sub_path": "process/fdm_process_U1_common.json"
         },
         {
             "name": "0.06 Standard @Snapmaker (0.2 nozzle)",
             "sub_path": "process/0.06 Standard @Snapmaker (0.2 nozzle).json"
         },
-        {
-            "name": "0.06 Standard @Snapmaker J1 (0.2 nozzle)",
-            "sub_path": "process/0.06 Standard @Snapmaker J1 (0.2 nozzle).json"
-        },
-        {
-            "name": "0.06 Standard @Snapmaker Artisan (0.2 nozzle)",
-            "sub_path": "process/0.06 Standard @Snapmaker Artisan (0.2 nozzle).json"
-        },
         {
             "name": "0.08 Extra Fine @Snapmaker (0.4 nozzle)",
             "sub_path": "process/0.08 Extra Fine @Snapmaker (0.4 nozzle).json"
         },
-        {
-            "name": "0.08 Extra Fine @Snapmaker J1 (0.4 nozzle)",
-            "sub_path": "process/0.08 Extra Fine @Snapmaker J1 (0.4 nozzle).json"
-        },
-        {
-            "name": "0.08 Extra Fine @Snapmaker Artisan (0.4 nozzle)",
-            "sub_path": "process/0.08 Extra Fine @Snapmaker Artisan (0.4 nozzle).json"
-        },
         {
             "name": "0.10 Standard @Snapmaker (0.2 nozzle)",
             "sub_path": "process/0.10 Standard @Snapmaker (0.2 nozzle).json"
         },
-        {
-            "name": "0.10 Standard @Snapmaker J1 (0.2 nozzle)",
-            "sub_path": "process/0.10 Standard @Snapmaker J1 (0.2 nozzle).json"
-        },
-        {
-            "name": "0.10 Standard @Snapmaker Artisan (0.2 nozzle)",
-            "sub_path": "process/0.10 Standard @Snapmaker Artisan (0.2 nozzle).json"
-        },
         {
             "name": "0.12 Fine @Snapmaker (0.4 nozzle)",
             "sub_path": "process/0.12 Fine @Snapmaker (0.4 nozzle).json"
         },
-        {
-            "name": "0.12 Fine @Snapmaker J1 (0.4 nozzle)",
-            "sub_path": "process/0.12 Fine @Snapmaker J1 (0.4 nozzle).json"
-        },
-        {
-            "name": "0.12 Fine @Snapmaker Artisan (0.4 nozzle)",
-            "sub_path": "process/0.12 Fine @Snapmaker Artisan (0.4 nozzle).json"
-        },
         {
             "name": "0.14 Standard @Snapmaker (0.2 nozzle)",
             "sub_path": "process/0.14 Standard @Snapmaker (0.2 nozzle).json"
         },
-        {
-            "name": "0.14 Standard @Snapmaker J1 (0.2 nozzle)",
-            "sub_path": "process/0.14 Standard @Snapmaker J1 (0.2 nozzle).json"
-        },
-        {
-            "name": "0.14 Standard @Snapmaker Artisan (0.2 nozzle)",
-            "sub_path": "process/0.14 Standard @Snapmaker Artisan (0.2 nozzle).json"
-        },
         {
             "name": "0.16 Optimal @Snapmaker (0.4 nozzle)",
             "sub_path": "process/0.16 Optimal @Snapmaker (0.4 nozzle).json"
         },
-        {
-            "name": "0.16 Optimal @Snapmaker J1 (0.4 nozzle)",
-            "sub_path": "process/0.16 Optimal @Snapmaker J1 (0.4 nozzle).json"
-        },
-        {
-            "name": "0.16 Optimal @Snapmaker Artisan (0.4 nozzle)",
-            "sub_path": "process/0.16 Optimal @Snapmaker Artisan (0.4 nozzle).json"
-        },
         {
             "name": "0.18 Standard @Snapmaker (0.6 nozzle)",
             "sub_path": "process/0.18 Standard @Snapmaker (0.6 nozzle).json"
         },
-        {
-            "name": "0.18 Standard @Snapmaker J1 (0.6 nozzle)",
-            "sub_path": "process/0.18 Standard @Snapmaker J1 (0.6 nozzle).json"
-        },
-        {
-            "name": "0.18 Standard @Snapmaker Artisan (0.6 nozzle)",
-            "sub_path": "process/0.18 Standard @Snapmaker Artisan (0.6 nozzle).json"
-        },
         {
             "name": "0.20 Standard @Snapmaker (0.4 nozzle)",
             "sub_path": "process/0.20 Standard @Snapmaker (0.4 nozzle).json"
         },
-        {
-            "name": "0.20 Standard @Snapmaker J1 (0.4 nozzle)",
-            "sub_path": "process/0.20 Standard @Snapmaker J1 (0.4 nozzle).json"
-        },
-        {
-            "name": "0.20 Standard @Snapmaker Artisan (0.4 nozzle)",
-            "sub_path": "process/0.20 Standard @Snapmaker Artisan (0.4 nozzle).json"
-        },
         {
             "name": "0.20 Strength @Snapmaker (0.4 nozzle)",
             "sub_path": "process/0.20 Strength @Snapmaker (0.4 nozzle).json"
         },
-        {
-            "name": "0.20 Strength @Snapmaker J1 (0.4 nozzle)",
-            "sub_path": "process/0.20 Strength @Snapmaker J1 (0.4 nozzle).json"
-        },
-        {
-            "name": "0.20 Strength @Snapmaker Artisan (0.4 nozzle)",
-            "sub_path": "process/0.20 Strength @Snapmaker Artisan (0.4 nozzle).json"
-        },
         {
             "name": "0.24 Draft @Snapmaker (0.4 nozzle)",
             "sub_path": "process/0.24 Draft @Snapmaker (0.4 nozzle).json"
         },
-        {
-            "name": "0.24 Draft @Snapmaker J1 (0.4 nozzle)",
-            "sub_path": "process/0.24 Draft @Snapmaker J1 (0.4 nozzle).json"
-        },
-        {
-            "name": "0.24 Draft @Snapmaker Artisan (0.4 nozzle)",
-            "sub_path": "process/0.24 Draft @Snapmaker Artisan (0.4 nozzle).json"
-        },
-        {
-            "name": "0.25 Benchy @Snapmaker J1 (0.4 nozzle)",
-            "sub_path": "process/0.25 Benchy @Snapmaker J1 (0.4 nozzle).json"
-        },
-        {
-            "name": "0.25 Benchy @Snapmaker Artisan (0.4 nozzle)",
-            "sub_path": "process/0.25 Benchy @Snapmaker Artisan (0.4 nozzle).json"
-        },
         {
             "name": "0.24 Standard @Snapmaker (0.6 nozzle)",
             "sub_path": "process/0.24 Standard @Snapmaker (0.6 nozzle).json"
         },
-        {
-            "name": "0.24 Standard @Snapmaker J1 (0.6 nozzle)",
-            "sub_path": "process/0.24 Standard @Snapmaker J1 (0.6 nozzle).json"
-        },
-        {
-            "name": "0.24 Standard @Snapmaker Artisan (0.6 nozzle)",
-            "sub_path": "process/0.24 Standard @Snapmaker Artisan (0.6 nozzle).json"
-        },
         {
             "name": "0.24 Standard @Snapmaker (0.8 nozzle)",
             "sub_path": "process/0.24 Standard @Snapmaker (0.8 nozzle).json"
         },
-        {
-            "name": "0.24 Standard @Snapmaker J1 (0.8 nozzle)",
-            "sub_path": "process/0.24 Standard @Snapmaker J1 (0.8 nozzle).json"
-        },
-        {
-            "name": "0.24 Standard @Snapmaker Artisan (0.8 nozzle)",
-            "sub_path": "process/0.24 Standard @Snapmaker Artisan (0.8 nozzle).json"
-        },
         {
             "name": "0.28 Extra Draft @Snapmaker (0.4 nozzle)",
             "sub_path": "process/0.28 Extra Draft @Snapmaker (0.4 nozzle).json"
         },
-        {
-            "name": "0.28 Extra Draft @Snapmaker J1 (0.4 nozzle)",
-            "sub_path": "process/0.28 Extra Draft @Snapmaker J1 (0.4 nozzle).json"
-        },
-        {
-            "name": "0.28 Extra Draft @Snapmaker Artisan (0.4 nozzle)",
-            "sub_path": "process/0.28 Extra Draft @Snapmaker Artisan (0.4 nozzle).json"
-        },
         {
             "name": "0.30 Standard @Snapmaker (0.6 nozzle)",
             "sub_path": "process/0.30 Standard @Snapmaker (0.6 nozzle).json"
         },
-        {
-            "name": "0.30 Standard @Snapmaker J1 (0.6 nozzle)",
-            "sub_path": "process/0.30 Standard @Snapmaker J1 (0.6 nozzle).json"
-        },
-        {
-            "name": "0.30 Standard @Snapmaker Artisan (0.6 nozzle)",
-            "sub_path": "process/0.30 Standard @Snapmaker Artisan (0.6 nozzle).json"
-        },
         {
             "name": "0.30 Strength @Snapmaker (0.6 nozzle)",
             "sub_path": "process/0.30 Strength @Snapmaker (0.6 nozzle).json"
         },
-        {
-            "name": "0.30 Strength @Snapmaker J1 (0.6 nozzle)",
-            "sub_path": "process/0.30 Strength @Snapmaker J1 (0.6 nozzle).json"
-        },
-        {
-            "name": "0.30 Strength @Snapmaker Artisan (0.6 nozzle)",
-            "sub_path": "process/0.30 Strength @Snapmaker Artisan (0.6 nozzle).json"
-        },
         {
             "name": "0.32 Standard @Snapmaker (0.8 nozzle)",
             "sub_path": "process/0.32 Standard @Snapmaker (0.8 nozzle).json"
         },
-        {
-            "name": "0.32 Standard @Snapmaker J1 (0.8 nozzle)",
-            "sub_path": "process/0.32 Standard @Snapmaker J1 (0.8 nozzle).json"
-        },
-        {
-            "name": "0.32 Standard @Snapmaker Artisan (0.8 nozzle)",
-            "sub_path": "process/0.32 Standard @Snapmaker Artisan (0.8 nozzle).json"
-        },
         {
             "name": "0.34 Standard @Snapmaker (0.6 nozzle)",
             "sub_path": "process/0.34 Standard @Snapmaker (0.6 nozzle).json"
         },
-        {
-            "name": "0.34 Standard @Snapmaker J1 (0.6 nozzle)",
-            "sub_path": "process/0.34 Standard @Snapmaker J1 (0.6 nozzle).json"
-        },
-        {
-            "name": "0.34 Standard @Snapmaker Artisan (0.6 nozzle)",
-            "sub_path": "process/0.34 Standard @Snapmaker Artisan (0.6 nozzle).json"
-        },
         {
             "name": "0.36 Standard @Snapmaker (0.8 nozzle)",
             "sub_path": "process/0.36 Standard @Snapmaker (0.8 nozzle).json"
         },
-        {
-            "name": "0.36 Standard @Snapmaker J1 (0.8 nozzle)",
-            "sub_path": "process/0.36 Standard @Snapmaker J1 (0.8 nozzle).json"
-        },
-        {
-            "name": "0.36 Standard @Snapmaker Artisan (0.8 nozzle)",
-            "sub_path": "process/0.36 Standard @Snapmaker Artisan (0.8 nozzle).json"
-        },
         {
             "name": "0.38 Standard @Snapmaker (0.6 nozzle)",
             "sub_path": "process/0.38 Standard @Snapmaker (0.6 nozzle).json"
         },
-        {
-            "name": "0.38 Standard @Snapmaker J1 (0.6 nozzle)",
-            "sub_path": "process/0.38 Standard @Snapmaker J1 (0.6 nozzle).json"
-        },
-        {
-            "name": "0.38 Standard @Snapmaker Artisan (0.6 nozzle)",
-            "sub_path": "process/0.38 Standard @Snapmaker Artisan (0.6 nozzle).json"
-        },
         {
             "name": "0.40 Standard @Snapmaker (0.8 nozzle)",
             "sub_path": "process/0.40 Standard @Snapmaker (0.8 nozzle).json"
         },
-        {
-            "name": "0.40 Standard @Snapmaker J1 (0.8 nozzle)",
-            "sub_path": "process/0.40 Standard @Snapmaker J1 (0.8 nozzle).json"
-        },
-        {
-            "name": "0.40 Standard @Snapmaker Artisan (0.8 nozzle)",
-            "sub_path": "process/0.40 Standard @Snapmaker Artisan (0.8 nozzle).json"
-        },
         {
             "name": "0.42 Draft @Snapmaker (0.6 nozzle)",
             "sub_path": "process/0.42 Draft @Snapmaker (0.6 nozzle).json"
         },
         {
-            "name": "0.42 Draft @Snapmaker J1 (0.6 nozzle)",
-            "sub_path": "process/0.42 Draft @Snapmaker J1 (0.6 nozzle).json"
+            "name": "0.48 Draft @Snapmaker (0.8 nozzle)",
+            "sub_path": "process/0.48 Draft @Snapmaker (0.8 nozzle).json"
+        },
+        {
+            "name": "fdm_process_a400",
+            "sub_path": "process/fdm_process_a400.json"
+        },
+        {
+            "name": "fdm_process_idex",
+            "sub_path": "process/fdm_process_idex.json"
+        },
+        {
+            "name": "fdm_process_U1_0.08",
+            "sub_path": "process/fdm_process_U1_0.08.json"
+        },
+        {
+            "name": "fdm_process_U1_0.12",
+            "sub_path": "process/fdm_process_U1_0.12.json"
+        },
+        {
+            "name": "fdm_process_U1_0.16",
+            "sub_path": "process/fdm_process_U1_0.16.json"
+        },
+        {
+            "name": "fdm_process_U1_0.20",
+            "sub_path": "process/fdm_process_U1_0.20.json"
+        },
+        {
+            "name": "fdm_process_U1_0.24",
+            "sub_path": "process/fdm_process_U1_0.24.json"
+        },
+        {
+            "name": "fdm_process_U1_0.28",
+            "sub_path": "process/fdm_process_U1_0.28.json"
+        },
+        {
+            "name": "0.08 Extra Fine @Snapmaker Artisan (0.4 nozzle)",
+            "sub_path": "process/0.08 Extra Fine @Snapmaker Artisan (0.4 nozzle).json"
+        },
+        {
+            "name": "0.10 Standard @Snapmaker Artisan (0.2 nozzle)",
+            "sub_path": "process/0.10 Standard @Snapmaker Artisan (0.2 nozzle).json"
+        },
+        {
+            "name": "0.12 Fine @Snapmaker Artisan (0.4 nozzle)",
+            "sub_path": "process/0.12 Fine @Snapmaker Artisan (0.4 nozzle).json"
+        },
+        {
+            "name": "0.14 Standard @Snapmaker Artisan (0.2 nozzle)",
+            "sub_path": "process/0.14 Standard @Snapmaker Artisan (0.2 nozzle).json"
+        },
+        {
+            "name": "0.16 Optimal @Snapmaker Artisan (0.4 nozzle)",
+            "sub_path": "process/0.16 Optimal @Snapmaker Artisan (0.4 nozzle).json"
+        },
+        {
+            "name": "0.18 Standard @Snapmaker Artisan (0.6 nozzle)",
+            "sub_path": "process/0.18 Standard @Snapmaker Artisan (0.6 nozzle).json"
+        },
+        {
+            "name": "0.20 Standard @Snapmaker Artisan (0.4 nozzle)",
+            "sub_path": "process/0.20 Standard @Snapmaker Artisan (0.4 nozzle).json"
+        },
+        {
+            "name": "0.20 Strength @Snapmaker Artisan (0.4 nozzle)",
+            "sub_path": "process/0.20 Strength @Snapmaker Artisan (0.4 nozzle).json"
+        },
+        {
+            "name": "0.24 Draft @Snapmaker Artisan (0.4 nozzle)",
+            "sub_path": "process/0.24 Draft @Snapmaker Artisan (0.4 nozzle).json"
+        },
+        {
+            "name": "0.24 Standard @Snapmaker Artisan (0.6 nozzle)",
+            "sub_path": "process/0.24 Standard @Snapmaker Artisan (0.6 nozzle).json"
+        },
+        {
+            "name": "0.24 Standard @Snapmaker Artisan (0.8 nozzle)",
+            "sub_path": "process/0.24 Standard @Snapmaker Artisan (0.8 nozzle).json"
+        },
+        {
+            "name": "0.25 Benchy @Snapmaker Artisan (0.4 nozzle)",
+            "sub_path": "process/0.25 Benchy @Snapmaker Artisan (0.4 nozzle).json"
+        },
+        {
+            "name": "0.28 Extra Draft @Snapmaker Artisan (0.4 nozzle)",
+            "sub_path": "process/0.28 Extra Draft @Snapmaker Artisan (0.4 nozzle).json"
+        },
+        {
+            "name": "0.30 Standard @Snapmaker Artisan (0.6 nozzle)",
+            "sub_path": "process/0.30 Standard @Snapmaker Artisan (0.6 nozzle).json"
+        },
+        {
+            "name": "0.30 Strength @Snapmaker Artisan (0.6 nozzle)",
+            "sub_path": "process/0.30 Strength @Snapmaker Artisan (0.6 nozzle).json"
+        },
+        {
+            "name": "0.32 Standard @Snapmaker Artisan (0.8 nozzle)",
+            "sub_path": "process/0.32 Standard @Snapmaker Artisan (0.8 nozzle).json"
+        },
+        {
+            "name": "0.34 Standard @Snapmaker Artisan (0.6 nozzle)",
+            "sub_path": "process/0.34 Standard @Snapmaker Artisan (0.6 nozzle).json"
+        },
+        {
+            "name": "0.36 Standard @Snapmaker Artisan (0.8 nozzle)",
+            "sub_path": "process/0.36 Standard @Snapmaker Artisan (0.8 nozzle).json"
+        },
+        {
+            "name": "0.38 Standard @Snapmaker Artisan (0.6 nozzle)",
+            "sub_path": "process/0.38 Standard @Snapmaker Artisan (0.6 nozzle).json"
+        },
+        {
+            "name": "0.40 Standard @Snapmaker Artisan (0.8 nozzle)",
+            "sub_path": "process/0.40 Standard @Snapmaker Artisan (0.8 nozzle).json"
         },
         {
             "name": "0.42 Draft @Snapmaker Artisan (0.6 nozzle)",
             "sub_path": "process/0.42 Draft @Snapmaker Artisan (0.6 nozzle).json"
         },
         {
-            "name": "0.48 Draft @Snapmaker (0.8 nozzle)",
-            "sub_path": "process/0.48 Draft @Snapmaker (0.8 nozzle).json"
+            "name": "0.48 Draft @Snapmaker Artisan (0.8 nozzle)",
+            "sub_path": "process/0.48 Draft @Snapmaker Artisan (0.8 nozzle).json"
+        },
+        {
+            "name": "0.06 Standard @Snapmaker J1 (0.2 nozzle)",
+            "sub_path": "process/0.06 Standard @Snapmaker J1 (0.2 nozzle).json"
+        },
+        {
+            "name": "0.08 Extra Fine @Snapmaker J1 (0.4 nozzle)",
+            "sub_path": "process/0.08 Extra Fine @Snapmaker J1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.10 Standard @Snapmaker J1 (0.2 nozzle)",
+            "sub_path": "process/0.10 Standard @Snapmaker J1 (0.2 nozzle).json"
+        },
+        {
+            "name": "0.12 Fine @Snapmaker J1 (0.4 nozzle)",
+            "sub_path": "process/0.12 Fine @Snapmaker J1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.14 Standard @Snapmaker J1 (0.2 nozzle)",
+            "sub_path": "process/0.14 Standard @Snapmaker J1 (0.2 nozzle).json"
+        },
+        {
+            "name": "0.16 Optimal @Snapmaker J1 (0.4 nozzle)",
+            "sub_path": "process/0.16 Optimal @Snapmaker J1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.18 Standard @Snapmaker J1 (0.6 nozzle)",
+            "sub_path": "process/0.18 Standard @Snapmaker J1 (0.6 nozzle).json"
+        },
+        {
+            "name": "0.20 Standard @Snapmaker J1 (0.4 nozzle)",
+            "sub_path": "process/0.20 Standard @Snapmaker J1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.20 Strength @Snapmaker J1 (0.4 nozzle)",
+            "sub_path": "process/0.20 Strength @Snapmaker J1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.24 Draft @Snapmaker J1 (0.4 nozzle)",
+            "sub_path": "process/0.24 Draft @Snapmaker J1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.24 Standard @Snapmaker J1 (0.6 nozzle)",
+            "sub_path": "process/0.24 Standard @Snapmaker J1 (0.6 nozzle).json"
+        },
+        {
+            "name": "0.24 Standard @Snapmaker J1 (0.8 nozzle)",
+            "sub_path": "process/0.24 Standard @Snapmaker J1 (0.8 nozzle).json"
+        },
+        {
+            "name": "0.25 Benchy @Snapmaker J1 (0.4 nozzle)",
+            "sub_path": "process/0.25 Benchy @Snapmaker J1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.28 Extra Draft @Snapmaker J1 (0.4 nozzle)",
+            "sub_path": "process/0.28 Extra Draft @Snapmaker J1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.30 Standard @Snapmaker J1 (0.6 nozzle)",
+            "sub_path": "process/0.30 Standard @Snapmaker J1 (0.6 nozzle).json"
+        },
+        {
+            "name": "0.30 Strength @Snapmaker J1 (0.6 nozzle)",
+            "sub_path": "process/0.30 Strength @Snapmaker J1 (0.6 nozzle).json"
+        },
+        {
+            "name": "0.32 Standard @Snapmaker J1 (0.8 nozzle)",
+            "sub_path": "process/0.32 Standard @Snapmaker J1 (0.8 nozzle).json"
+        },
+        {
+            "name": "0.34 Standard @Snapmaker J1 (0.6 nozzle)",
+            "sub_path": "process/0.34 Standard @Snapmaker J1 (0.6 nozzle).json"
+        },
+        {
+            "name": "0.36 Standard @Snapmaker J1 (0.8 nozzle)",
+            "sub_path": "process/0.36 Standard @Snapmaker J1 (0.8 nozzle).json"
+        },
+        {
+            "name": "0.38 Standard @Snapmaker J1 (0.6 nozzle)",
+            "sub_path": "process/0.38 Standard @Snapmaker J1 (0.6 nozzle).json"
+        },
+        {
+            "name": "0.40 Standard @Snapmaker J1 (0.8 nozzle)",
+            "sub_path": "process/0.40 Standard @Snapmaker J1 (0.8 nozzle).json"
+        },
+        {
+            "name": "0.42 Draft @Snapmaker J1 (0.6 nozzle)",
+            "sub_path": "process/0.42 Draft @Snapmaker J1 (0.6 nozzle).json"
         },
         {
             "name": "0.48 Draft @Snapmaker J1 (0.8 nozzle)",
             "sub_path": "process/0.48 Draft @Snapmaker J1 (0.8 nozzle).json"
         },
         {
-            "name": "0.48 Draft @Snapmaker Artisan (0.8 nozzle)",
-            "sub_path": "process/0.48 Draft @Snapmaker Artisan (0.8 nozzle).json"
+            "name": "0.08 Extra Fine @Snapmaker U1 (0.4 nozzle)",
+            "sub_path": "process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.08 High Quality @Snapmaker U1 (0.4 nozzle)",
+            "sub_path": "process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.12 Fine @Snapmaker U1 (0.4 nozzle)",
+            "sub_path": "process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.12 High Quality @Snapmaker U1 (0.4 nozzle)",
+            "sub_path": "process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.16 High Quality @Snapmaker U1 (0.4 nozzle)",
+            "sub_path": "process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.16 Optimal @Snapmaker U1 (0.4 nozzle)",
+            "sub_path": "process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle)",
+            "sub_path": "process/0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.20 Quality @Snapmaker U1 (0.4 nozzle)",
+            "sub_path": "process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.20 Standard @Snapmaker U1 (0.4 nozzle)",
+            "sub_path": "process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.20 Strength @Snapmaker U1 (0.4 nozzle)",
+            "sub_path": "process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.20 Support @Snapmaker U1 (0.4 nozzle)",
+            "sub_path": "process/0.20 Support @Snapmaker U1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.20 Support W @Snapmaker U1 (0.4 nozzle)",
+            "sub_path": "process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.24 Draft @Snapmaker U1 (0.4 nozzle)",
+            "sub_path": "process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.28 Extra Draft @Snapmaker U1 (0.4 nozzle)",
+            "sub_path": "process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json"
+        },
+        {
+            "name": "0.06 Standard @Snapmaker Artisan (0.2 nozzle)",
+            "sub_path": "process/0.06 Standard @Snapmaker Artisan (0.2 nozzle).json"
         }
     ],
     "filament_list": [
@@ -368,6 +464,18 @@
             "name": "PolyTerra PLA @0.2 nozzle",
             "sub_path": "filament/PolyTerra PLA @0.2 nozzle.json"
         },
+        {
+            "name": "Snapmaker PLA Lite @U1 base",
+            "sub_path": "filament/Snapmaker PLA Lite @U1 base.json"
+        },
+        {
+            "name": "Snapmaker PLA SnapSpeed @U1 base",
+            "sub_path": "filament/Snapmaker PLA SnapSpeed @U1 base.json"
+        },
+        {
+            "name": "Snapmaker TPU 95A @U1 base",
+            "sub_path": "filament/Snapmaker TPU 95A @U1 base.json"
+        },
         {
             "name": "fdm_filament_common",
             "sub_path": "filament/fdm_filament_common.json"
@@ -380,6 +488,18 @@
             "name": "PolyTerra J1 PLA @0.2 nozzle",
             "sub_path": "filament/PolyTerra J1 PLA @0.2 nozzle.json"
         },
+        {
+            "name": "Snapmaker PLA Lite @U1",
+            "sub_path": "filament/Snapmaker PLA Lite @U1.json"
+        },
+        {
+            "name": "Snapmaker PLA SnapSpeed @U1",
+            "sub_path": "filament/Snapmaker PLA SnapSpeed @U1.json"
+        },
+        {
+            "name": "Snapmaker TPU 95A @U1",
+            "sub_path": "filament/Snapmaker TPU 95A @U1.json"
+        },
         {
             "name": "fdm_filament_abs",
             "sub_path": "filament/fdm_filament_abs.json"
@@ -416,6 +536,10 @@
             "name": "fdm_filament_tpu",
             "sub_path": "filament/fdm_filament_tpu.json"
         },
+        {
+            "name": "Snapmaker ABS @U1 base",
+            "sub_path": "filament/Snapmaker ABS @U1 base.json"
+        },
         {
             "name": "Snapmaker ABS @base",
             "sub_path": "filament/Snapmaker ABS @base.json"
@@ -428,6 +552,10 @@
             "name": "Snapmaker J1 ABS @base",
             "sub_path": "filament/Snapmaker J1 ABS @base.json"
         },
+        {
+            "name": "Snapmaker ASA @U1 base",
+            "sub_path": "filament/Snapmaker ASA @U1 base.json"
+        },
         {
             "name": "Snapmaker ASA @base",
             "sub_path": "filament/Snapmaker ASA @base.json"
@@ -456,6 +584,10 @@
             "name": "Snapmaker J1 PA-CF @base",
             "sub_path": "filament/Snapmaker J1 PA-CF @base.json"
         },
+        {
+            "name": "Snapmaker PA-CF @U1 base",
+            "sub_path": "filament/Snapmaker PA-CF @U1 base.json"
+        },
         {
             "name": "Snapmaker PA-CF @base",
             "sub_path": "filament/Snapmaker PA-CF @base.json"
@@ -468,6 +600,10 @@
             "name": "Snapmaker J1 PET @base",
             "sub_path": "filament/Snapmaker J1 PET @base.json"
         },
+        {
+            "name": "Snapmaker PET @U1 base",
+            "sub_path": "filament/Snapmaker PET @U1 base.json"
+        },
         {
             "name": "Snapmaker PET @base",
             "sub_path": "filament/Snapmaker PET @base.json"
@@ -488,18 +624,34 @@
             "name": "Snapmaker J1 PETG-CF @base",
             "sub_path": "filament/Snapmaker J1 PETG-CF @base.json"
         },
+        {
+            "name": "Snapmaker PETG @U1 base",
+            "sub_path": "filament/Snapmaker PETG @U1 base.json"
+        },
         {
             "name": "Snapmaker PETG @base",
             "sub_path": "filament/Snapmaker PETG @base.json"
         },
+        {
+            "name": "Snapmaker PETG-CF @U1 base",
+            "sub_path": "filament/Snapmaker PETG-CF @U1 base.json"
+        },
         {
             "name": "Snapmaker PETG-CF @base",
             "sub_path": "filament/Snapmaker PETG-CF @base.json"
         },
+        {
+            "name": "PolyLite PLA @U1 base",
+            "sub_path": "filament/PolyLite PLA @U1 base.json"
+        },
         {
             "name": "PolyLite PLA @base",
             "sub_path": "filament/PolyLite PLA @base.json"
         },
+        {
+            "name": "PolyTerra PLA @U1 base",
+            "sub_path": "filament/PolyTerra PLA @U1 base.json"
+        },
         {
             "name": "Snapmaker Dual PLA @base",
             "sub_path": "filament/Snapmaker Dual PLA @base.json"
@@ -540,14 +692,30 @@
             "name": "Snapmaker J1 PLA-CF @base",
             "sub_path": "filament/Snapmaker J1 PLA-CF @base.json"
         },
+        {
+            "name": "Snapmaker PLA @U1 base",
+            "sub_path": "filament/Snapmaker PLA @U1 base.json"
+        },
         {
             "name": "Snapmaker PLA @base",
             "sub_path": "filament/Snapmaker PLA @base.json"
         },
+        {
+            "name": "Snapmaker PLA Metal @U1 base",
+            "sub_path": "filament/Snapmaker PLA Metal @U1 base.json"
+        },
+        {
+            "name": "Snapmaker PLA Silk @U1 base",
+            "sub_path": "filament/Snapmaker PLA Silk @U1 base.json"
+        },
         {
             "name": "Snapmaker PLA Silk @base",
             "sub_path": "filament/Snapmaker PLA Silk @base.json"
         },
+        {
+            "name": "Snapmaker PLA-CF @U1 base",
+            "sub_path": "filament/Snapmaker PLA-CF @U1 base.json"
+        },
         {
             "name": "Snapmaker PLA-CF @base",
             "sub_path": "filament/Snapmaker PLA-CF @base.json"
@@ -564,6 +732,10 @@
             "name": "Snapmaker J1 PVA @base",
             "sub_path": "filament/Snapmaker J1 PVA @base.json"
         },
+        {
+            "name": "Snapmaker PVA @U1 base",
+            "sub_path": "filament/Snapmaker PVA @U1 base.json"
+        },
         {
             "name": "Snapmaker PVA @base",
             "sub_path": "filament/Snapmaker PVA @base.json"
@@ -576,10 +748,22 @@
             "name": "Snapmaker J1 TPU @base",
             "sub_path": "filament/Snapmaker J1 TPU @base.json"
         },
+        {
+            "name": "Snapmaker TPU @U1 base",
+            "sub_path": "filament/Snapmaker TPU @U1 base.json"
+        },
         {
             "name": "Snapmaker TPU @base",
             "sub_path": "filament/Snapmaker TPU @base.json"
         },
+        {
+            "name": "Snapmaker ABS @U1",
+            "sub_path": "filament/Snapmaker ABS @U1.json"
+        },
+        {
+            "name": "Snapmaker ABS Benchy @U1",
+            "sub_path": "filament/Snapmaker ABS Benchy @U1.json"
+        },
         {
             "name": "Snapmaker ABS",
             "sub_path": "filament/Snapmaker ABS.json"
@@ -620,6 +804,10 @@
             "name": "Snapmaker J1 ABS Benchy",
             "sub_path": "filament/Snapmaker J1 ABS Benchy.json"
         },
+        {
+            "name": "Snapmaker ASA @U1",
+            "sub_path": "filament/Snapmaker ASA @U1.json"
+        },
         {
             "name": "Snapmaker ASA",
             "sub_path": "filament/Snapmaker ASA.json"
@@ -668,6 +856,10 @@
             "name": "Snapmaker J1 PA-CF",
             "sub_path": "filament/Snapmaker J1 PA-CF.json"
         },
+        {
+            "name": "Snapmaker PA-CF @U1",
+            "sub_path": "filament/Snapmaker PA-CF @U1.json"
+        },
         {
             "name": "Snapmaker PA-CF",
             "sub_path": "filament/Snapmaker PA-CF.json"
@@ -684,6 +876,10 @@
             "name": "Snapmaker J1 PET",
             "sub_path": "filament/Snapmaker J1 PET.json"
         },
+        {
+            "name": "Snapmaker PET @U1",
+            "sub_path": "filament/Snapmaker PET @U1.json"
+        },
         {
             "name": "Snapmaker PET",
             "sub_path": "filament/Snapmaker PET.json"
@@ -720,6 +916,10 @@
             "name": "Snapmaker J1 PETG-CF",
             "sub_path": "filament/Snapmaker J1 PETG-CF.json"
         },
+        {
+            "name": "Snapmaker PETG @U1",
+            "sub_path": "filament/Snapmaker PETG @U1.json"
+        },
         {
             "name": "Snapmaker PETG",
             "sub_path": "filament/Snapmaker PETG.json"
@@ -728,10 +928,18 @@
             "name": "Snapmaker PETG @0.2 nozzle",
             "sub_path": "filament/Snapmaker PETG @0.2 nozzle.json"
         },
+        {
+            "name": "Snapmaker PETG-CF @U1",
+            "sub_path": "filament/Snapmaker PETG-CF @U1.json"
+        },
         {
             "name": "Snapmaker PETG-CF",
             "sub_path": "filament/Snapmaker PETG-CF.json"
         },
+        {
+            "name": "PolyLite PLA @U1",
+            "sub_path": "filament/PolyLite PLA @U1.json"
+        },
         {
             "name": "PolyLite J1 PLA",
             "sub_path": "filament/PolyLite J1 PLA.json"
@@ -740,6 +948,10 @@
             "name": "PolyLite PLA @0.2 nozzle",
             "sub_path": "filament/PolyLite PLA @0.2 nozzle.json"
         },
+        {
+            "name": "PolyTerra PLA @U1",
+            "sub_path": "filament/PolyTerra PLA @U1.json"
+        },
         {
             "name": "Snapmaker Dual PLA",
             "sub_path": "filament/Snapmaker Dual PLA.json"
@@ -820,10 +1032,26 @@
             "name": "Snapmaker J1 PLA-CF @0.8 nozzle",
             "sub_path": "filament/Snapmaker J1 PLA-CF @0.8 nozzle.json"
         },
+        {
+            "name": "Snapmaker PLA @U1",
+            "sub_path": "filament/Snapmaker PLA @U1.json"
+        },
+        {
+            "name": "Snapmaker PLA Matte @U1",
+            "sub_path": "filament/Snapmaker PLA Matte @U1.json"
+        },
         {
             "name": "Snapmaker PLA",
             "sub_path": "filament/Snapmaker PLA.json"
         },
+        {
+            "name": "Snapmaker PLA Metal @U1",
+            "sub_path": "filament/Snapmaker PLA Metal @U1.json"
+        },
+        {
+            "name": "Snapmaker PLA Silk @U1",
+            "sub_path": "filament/Snapmaker PLA Silk @U1.json"
+        },
         {
             "name": "Snapmaker PLA Silk",
             "sub_path": "filament/Snapmaker PLA Silk.json"
@@ -832,6 +1060,10 @@
             "name": "Snapmaker PLA Silk @0.2 nozzle",
             "sub_path": "filament/Snapmaker PLA Silk @0.2 nozzle.json"
         },
+        {
+            "name": "Snapmaker PLA-CF @U1",
+            "sub_path": "filament/Snapmaker PLA-CF @U1.json"
+        },
         {
             "name": "Snapmaker PLA-CF",
             "sub_path": "filament/Snapmaker PLA-CF.json"
@@ -844,6 +1076,10 @@
             "name": "Snapmaker J1 PLA Eco @base",
             "sub_path": "filament/Snapmaker J1 PLA Eco @base.json"
         },
+        {
+            "name": "Snapmaker PLA Eco @U1 base",
+            "sub_path": "filament/Snapmaker PLA Eco @U1 base.json"
+        },
         {
             "name": "Snapmaker PLA Eco @base",
             "sub_path": "filament/Snapmaker PLA Eco @base.json"
@@ -864,6 +1100,10 @@
             "name": "Snapmaker J1 PVA @0.2 nozzle",
             "sub_path": "filament/Snapmaker J1 PVA @0.2 nozzle.json"
         },
+        {
+            "name": "Snapmaker PVA @U1",
+            "sub_path": "filament/Snapmaker PVA @U1.json"
+        },
         {
             "name": "Snapmaker PVA",
             "sub_path": "filament/Snapmaker PVA.json"
@@ -896,6 +1136,18 @@
             "name": "Snapmaker J1 TPU High-Flow",
             "sub_path": "filament/Snapmaker J1 TPU High-Flow.json"
         },
+        {
+            "name": "Snapmaker TPE @U1",
+            "sub_path": "filament/Snapmaker TPE @U1.json"
+        },
+        {
+            "name": "Snapmaker TPU @U1",
+            "sub_path": "filament/Snapmaker TPU @U1.json"
+        },
+        {
+            "name": "Snapmaker TPU High-Flow @U1",
+            "sub_path": "filament/Snapmaker TPU High-Flow @U1.json"
+        },
         {
             "name": "Snapmaker TPE",
             "sub_path": "filament/Snapmaker TPE.json"
@@ -936,13 +1188,29 @@
             "name": "Snapmaker J1 PLA Eco @0.8 nozzle",
             "sub_path": "filament/Snapmaker J1 PLA Eco @0.8 nozzle.json"
         },
+        {
+            "name": "Snapmaker PLA Eco @U1",
+            "sub_path": "filament/Snapmaker PLA Eco @U1.json"
+        },
         {
             "name": "Snapmaker PLA Eco",
             "sub_path": "filament/Snapmaker PLA Eco.json"
         },
+        {
+            "name": "Snapmaker Breakaway Support @base",
+            "sub_path": "filament/Snapmaker Breakaway Support @base.json"
+        },
+        {
+            "name": "Snapmaker Breakaway Support For PLA @U1",
+            "sub_path": "filament/Snapmaker Breakaway Support For PLA @U1.json"
+        },
         {
             "name": "PolyTerra J1 PLA",
             "sub_path": "filament/PolyTerra J1 PLA.json"
+        },
+        {
+            "name": "Snapmaker PLA Matte @U1 base",
+            "sub_path": "filament/Snapmaker PLA Matte @U1 base.json"
         }
     ],
     "machine_list": [
@@ -1030,6 +1298,18 @@
             "name": "fdm_a400",
             "sub_path": "machine/fdm_a400.json"
         },
+        {
+            "name": "fdm_klipper",
+            "sub_path": "machine/fdm_klipper.json"
+        },
+        {
+            "name": "fdm_toolchanger",
+            "sub_path": "machine/fdm_toolchanger.json"
+        },
+        {
+            "name": "fdm_U1",
+            "sub_path": "machine/fdm_U1.json"
+        },
         {
             "name": "Snapmaker J1 (0.2 nozzle)",
             "sub_path": "machine/Snapmaker J1 (0.2 nozzle).json"
@@ -1317,6 +1597,10 @@
         {
             "name": "Snapmaker Artisan (0.8 nozzle)",
             "sub_path": "machine/Snapmaker Artisan (0.8 nozzle).json"
+        },
+        {
+            "name": "Snapmaker U1 (0.4 nozzle)",
+            "sub_path": "machine/Snapmaker U1 (0.4 nozzle).json"
         }
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/Snapmaker U1_bed.stl b/resources/profiles/Snapmaker/Snapmaker U1_bed.stl
new file mode 100644
index 00000000000..f1c58f2e1eb
Binary files /dev/null and b/resources/profiles/Snapmaker/Snapmaker U1_bed.stl differ
diff --git a/resources/profiles/Snapmaker/Snapmaker U1_cover.png b/resources/profiles/Snapmaker/Snapmaker U1_cover.png
new file mode 100644
index 00000000000..d3f48f78528
Binary files /dev/null and b/resources/profiles/Snapmaker/Snapmaker U1_cover.png differ
diff --git a/resources/profiles/Snapmaker/Snapmaker U1_texture.svg b/resources/profiles/Snapmaker/Snapmaker U1_texture.svg
new file mode 100644
index 00000000000..b12ad10a5e4
--- /dev/null
+++ b/resources/profiles/Snapmaker/Snapmaker U1_texture.svg	
@@ -0,0 +1,14 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" width="270px" height="270px" viewBox="0 0 270 270" version="1.1">
+<g id="surface1">
+<path style=" stroke:none;fill-rule:nonzero;fill:rgb(100%,100%,100%);fill-opacity:1;" d="M 166.042969 136.941406 L 166.960938 135.988281 L 172.285156 141.527344 L 174.085938 141.527344 L 167.839844 135.105469 L 174.121094 128.578125 L 172.355469 128.578125 L 166.042969 135.105469 L 166.042969 122.902344 L 164.773438 122.902344 L 164.773438 141.527344 L 166.042969 141.527344 Z M 166.042969 136.941406 "/>
+<path style=" stroke:none;fill-rule:nonzero;fill:rgb(100%,100%,100%);fill-opacity:1;" d="M 91.011719 135.105469 C 91.011719 132.953125 92.703125 131.191406 94.785156 131.191406 C 96.867188 131.191406 98.558594 132.953125 98.558594 135.105469 L 98.558594 141.5625 L 101.066406 141.5625 L 101.066406 135.105469 C 101.066406 131.507812 98.242188 128.542969 94.75 128.542969 C 91.257812 128.542969 88.4375 131.472656 88.4375 135.105469 L 88.4375 141.5625 L 90.941406 141.5625 L 90.941406 135.105469 "/>
+<path style=" stroke:none;fill-rule:nonzero;fill:rgb(100%,100%,100%);fill-opacity:1;" d="M 119.195312 140.363281 C 120.253906 141.171875 121.558594 141.667969 122.972656 141.667969 C 126.464844 141.667969 129.285156 138.738281 129.285156 135.105469 C 129.285156 131.507812 126.464844 128.542969 122.972656 128.542969 C 119.480469 128.542969 116.65625 131.472656 116.65625 135.105469 L 116.65625 147.0625 L 119.160156 147.0625 L 119.160156 140.363281 Z M 122.972656 131.15625 C 125.050781 131.15625 126.746094 132.917969 126.746094 135.070312 C 126.746094 137.222656 125.050781 138.984375 122.972656 138.984375 C 120.890625 138.984375 119.195312 137.222656 119.195312 135.070312 C 119.195312 132.917969 120.890625 131.15625 122.972656 131.15625 "/>
+<path style=" stroke:none;fill-rule:nonzero;fill:rgb(100%,100%,100%);fill-opacity:1;" d="M 156.660156 141.632812 C 158.707031 141.632812 160.539062 140.574219 161.703125 138.984375 L 161.703125 141.492188 L 162.972656 141.492188 L 162.972656 128.933594 L 161.703125 128.933594 L 161.703125 131.121094 C 160.539062 129.53125 158.707031 128.472656 156.660156 128.472656 C 153.167969 128.472656 150.34375 131.402344 150.34375 135.035156 C 150.34375 138.738281 153.167969 141.632812 156.660156 141.632812 M 156.660156 129.886719 C 159.445312 129.886719 161.703125 132.214844 161.703125 135.140625 C 161.703125 138.035156 159.445312 140.398438 156.660156 140.398438 C 153.871094 140.398438 151.613281 138.070312 151.613281 135.140625 C 151.613281 132.214844 153.871094 129.886719 156.660156 129.886719 "/>
+<path style=" stroke:none;fill-rule:nonzero;fill:rgb(100%,100%,100%);fill-opacity:1;" d="M 174.015625 138.351562 C 175.742188 141.492188 179.625 142.550781 182.621094 140.75 C 184.632812 139.515625 185.761719 137.328125 185.796875 135.105469 L 184.457031 135.882812 C 184.246094 137.398438 183.363281 138.808594 182.023438 139.621094 C 179.800781 140.960938 176.976562 140.328125 175.460938 138.246094 L 182.164062 134.257812 L 184.140625 133.058594 L 185.269531 132.425781 C 185.199219 132.25 185.089844 132.035156 184.984375 131.859375 C 183.257812 128.722656 179.375 127.664062 176.378906 129.460938 C 173.308594 131.226562 172.285156 135.246094 174.015625 138.351562 M 176.976562 130.554688 C 179.199219 129.214844 182.023438 129.851562 183.539062 131.929688 L 174.863281 137.117188 C 173.875 134.71875 174.71875 131.929688 176.976562 130.554688 "/>
+<path style=" stroke:none;fill-rule:nonzero;fill:rgb(100%,100%,100%);fill-opacity:1;" d="M 187.171875 135.105469 L 187.171875 141.5625 L 188.441406 141.5625 L 188.441406 135.140625 C 188.441406 132.25 190.699219 129.921875 193.488281 129.921875 L 193.488281 128.613281 C 189.960938 128.578125 187.171875 131.472656 187.171875 135.105469 "/>
+<path style=" stroke:none;fill-rule:nonzero;fill:rgb(100%,100%,100%);fill-opacity:1;" d="M 81.488281 136.269531 C 83.496094 136.445312 84.730469 137.257812 84.660156 137.964844 C 84.589844 138.597656 83.566406 138.949219 82.4375 138.984375 C 81.453125 139.019531 79.546875 138.984375 77.535156 138.246094 C 77.394531 138.597656 76.867188 139.9375 76.617188 140.503906 C 77.113281 140.75 79.6875 141.949219 83.003906 141.632812 C 86.144531 141.351562 88.011719 139.199219 87.765625 137.503906 C 87.34375 134.117188 82.96875 134.011719 81.0625 133.695312 C 79.933594 133.484375 79.265625 132.8125 79.371094 132.25 C 79.511719 131.472656 80.710938 131.226562 82.332031 131.15625 C 84.484375 131.085938 86.285156 131.859375 86.285156 131.859375 C 86.285156 131.859375 86.953125 130.238281 87.203125 129.636719 C 85.296875 128.722656 83.320312 128.507812 82.332031 128.507812 C 79.015625 128.507812 76.511719 130.34375 76.511719 132.390625 C 76.511719 134.578125 79.015625 136.023438 81.488281 136.269531 "/>
+<path style=" stroke:none;fill-rule:nonzero;fill:rgb(100%,100%,100%);fill-opacity:1;" d="M 108.542969 141.632812 C 109.953125 141.632812 111.292969 141.136719 112.316406 140.328125 L 112.316406 141.527344 L 114.824219 141.527344 L 114.824219 128.96875 L 112.316406 128.96875 L 112.316406 129.886719 C 111.257812 129.074219 109.953125 128.578125 108.542969 128.578125 C 105.050781 128.578125 102.230469 131.507812 102.230469 135.140625 C 102.230469 138.738281 105.015625 141.632812 108.542969 141.632812 M 108.542969 131.15625 C 110.625 131.15625 112.316406 132.917969 112.316406 135.070312 C 112.316406 137.222656 110.625 138.984375 108.542969 138.984375 C 106.460938 138.984375 104.769531 137.222656 104.769531 135.070312 C 104.734375 132.917969 106.425781 131.15625 108.542969 131.15625 "/>
+<path style=" stroke:none;fill-rule:nonzero;fill:rgb(100%,100%,100%);fill-opacity:1;" d="M 131.789062 133.800781 C 131.789062 131.648438 133.484375 129.886719 135.5625 129.886719 C 137.644531 129.886719 139.339844 131.648438 139.339844 133.800781 L 139.339844 141.5625 L 140.609375 141.5625 L 140.609375 133.800781 C 140.609375 131.648438 142.300781 129.886719 144.382812 129.886719 C 146.464844 129.886719 148.15625 131.648438 148.15625 133.800781 L 148.15625 141.5625 L 149.429688 141.5625 L 149.429688 133.730469 C 149.390625 130.871094 147.171875 128.578125 144.382812 128.578125 C 142.476562 128.578125 140.820312 129.671875 139.9375 131.296875 C 139.058594 129.671875 137.433594 128.578125 135.492188 128.578125 C 132.707031 128.578125 130.484375 130.871094 130.449219 133.730469 L 130.449219 141.5625 L 131.71875 141.5625 L 131.71875 133.800781 Z M 131.789062 133.800781 "/>
+</g>
+</svg>
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 base.json b/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 base.json
new file mode 100644
index 00000000000..d0547572b6d
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 base.json	
@@ -0,0 +1,20 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "PolyLite PLA @U1 base",
+  "filament_id": "13938660340",
+  "inherits": "fdm_filament_pla",
+  "filament_flow_ratio": [
+    "0.95"
+  ],
+  "filament_cost": [
+    "90"
+  ],
+  "filament_max_volumetric_speed": [
+    "15"
+  ],
+  "default_filament_colour": [
+    ""
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA @U1.json b/resources/profiles/Snapmaker/filament/PolyLite PLA @U1.json
new file mode 100644
index 00000000000..ad81f2d79d2
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA @U1.json	
@@ -0,0 +1,11 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "PolyLite PLA @U1",
+  "setting_id": "6486836500",
+  "inherits": "PolyLite PLA @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA @base.json b/resources/profiles/Snapmaker/filament/PolyLite PLA @base.json
index 6fd4e2987c2..2a7310f4050 100644
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA @base.json	
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA @base.json	
@@ -15,6 +15,6 @@
     "15"
   ],
   "default_filament_colour": [
-    "#8269AC"
+    ""
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 base.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 base.json
new file mode 100644
index 00000000000..861179ca062
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 base.json	
@@ -0,0 +1,20 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "PolyTerra PLA @U1 base",
+  "filament_id": "37895926870",
+  "inherits": "fdm_filament_pla",
+  "filament_cost": [
+    "80"
+  ],
+  "filament_density": [
+    "1.31"
+  ],
+  "filament_max_volumetric_speed": [
+    "14.4"
+  ],
+  "default_filament_colour": [
+    ""
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1.json
new file mode 100644
index 00000000000..f77d1d80825
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1.json	
@@ -0,0 +1,11 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "PolyTerra PLA @U1",
+  "setting_id": "12580059400",
+  "inherits": "PolyTerra PLA @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json
new file mode 100644
index 00000000000..3e91fe6a819
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json	
@@ -0,0 +1,59 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "Snapmaker ABS @U1 base",
+  "filament_id": "1682237920",
+  "inherits": "fdm_filament_abs",
+  "filament_end_gcode": [
+    ""
+  ],
+  "hot_plate_temp": [
+    "110"
+  ],
+  "hot_plate_temp_initial_layer": [
+    "105"
+  ],
+  "overhang_fan_speed": [
+    "20"
+  ],
+  "filament_flow_ratio": [
+    "0.95"
+  ],
+  "filament_max_volumetric_speed": [
+    "8"
+  ],
+  "filament_loading_speed_start": [
+    "35"
+  ],
+  "filament_loading_speed": [
+    "35"
+  ],
+  "filament_unloading_speed_start": [
+    "35"
+  ],
+  "filament_unloading_speed": [
+    "35"
+  ],
+  "filament_load_time": [
+    "2"
+  ],
+  "filament_unload_time": [
+    "2"
+  ],
+  "filament_cooling_moves": [
+    "2"
+  ],
+  "filament_cooling_initial_speed": [
+    "35"
+  ],
+  "filament_cooling_final_speed": [
+    "60"
+  ],
+  "fan_max_speed": [
+    "15"
+  ],
+  "pressure_advance": [
+    "0.02"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json
new file mode 100644
index 00000000000..8e6cf258492
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json	
@@ -0,0 +1,11 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "Snapmaker ABS @U1",
+  "setting_id": "937533070",
+  "inherits": "Snapmaker ABS @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json
new file mode 100644
index 00000000000..f7ae10832b5
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json	
@@ -0,0 +1,62 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "Snapmaker ABS Benchy @U1",
+  "setting_id": "35407544770",
+  "inherits": "Snapmaker ABS @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ],
+  "compatible_prints": [
+    "0.25 Benchy @Snapmaker U1 (0.4 nozzle)"
+  ],
+  "overhang_fan_speed": [
+    "35"
+  ],
+  "slow_down_for_layer_cooling": [
+    "0"
+  ],
+  "fan_cooling_layer_time": [
+    "2"
+  ],
+  "filament_deretraction_speed": [
+    "55"
+  ],
+  "filament_max_volumetric_speed": [
+    "31"
+  ],
+  "filament_retract_when_changing_layer": [
+    "0"
+  ],
+  "filament_retraction_length": [
+    "0.5"
+  ],
+  "filament_z_hop": [
+    "0"
+  ],
+  "filament_retraction_speed": [
+    "55"
+  ],
+  "filament_wipe": [
+    "0"
+  ],
+  "nozzle_temperature": [
+    "250"
+  ],
+  "fan_max_speed": [
+    "50"
+  ],
+  "fan_min_speed": [
+    "35"
+  ],
+  "slow_down_min_speed": [
+    "0"
+  ],
+  "slow_down_layer_time": [
+    "0"
+  ],
+  "default_filament_colour": [
+    ""
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json
new file mode 100644
index 00000000000..273d20a1881
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json	
@@ -0,0 +1,56 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "Snapmaker ASA @U1 base",
+  "filament_id": "12471727060",
+  "inherits": "fdm_filament_asa",
+  "filament_end_gcode": [
+    ""
+  ],
+  "hot_plate_temp": [
+    "110"
+  ],
+  "hot_plate_temp_initial_layer": [
+    "100"
+  ],
+  "overhang_fan_speed": [
+    "15"
+  ],
+  "filament_max_volumetric_speed": [
+    "8"
+  ],
+  "filament_loading_speed_start": [
+    "35"
+  ],
+  "filament_loading_speed": [
+    "35"
+  ],
+  "filament_unloading_speed_start": [
+    "35"
+  ],
+  "filament_unloading_speed": [
+    "35"
+  ],
+  "filament_load_time": [
+    "2"
+  ],
+  "filament_unload_time": [
+    "2"
+  ],
+  "filament_cooling_moves": [
+    "2"
+  ],
+  "filament_cooling_initial_speed": [
+    "35"
+  ],
+  "filament_cooling_final_speed": [
+    "60"
+  ],
+  "fan_max_speed": [
+    "15"
+  ],
+  "fan_min_speed": [
+    "0"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json
new file mode 100644
index 00000000000..d1f75890545
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json	
@@ -0,0 +1,11 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "Snapmaker ASA @U1",
+  "setting_id": "25418661980",
+  "inherits": "Snapmaker ASA @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support @base.json
new file mode 100644
index 00000000000..ca24ae430ab
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support @base.json	
@@ -0,0 +1,50 @@
+{
+    "filament_cost": [
+        "100"
+    ],
+    "filament_density": [
+        "1.32"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_retraction_length": [
+        "1.8"
+    ],
+    "filament_settings_id": [
+        "Snapmaker Breakaway Support @base"
+    ],
+    "filament_type": [
+        "Breakaway Support"
+    ],
+    "from": "User",
+    "instantiation": "false",
+    "hot_plate_temp": [
+        "65"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "inherits": "Snapmaker J1 PVA",
+    "is_custom_defined": "0",
+    "name": "Snapmaker Breakaway Support @base",
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "200"
+    ],
+    "temperature_vitrification": [
+        "45"
+    ],
+    "version": "2.1.1.0"
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json
new file mode 100644
index 00000000000..163bb5c6281
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json	
@@ -0,0 +1,14 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "Snapmaker Breakaway Support For PLA @U1",
+  "setting_id": "41460000000",
+  "inherits": "Snapmaker Breakaway Support @base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ],
+  "filament_type": [
+    "PLA"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS Benchy.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS Benchy.json
index e6f005ca231..d7be3baec8c 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS Benchy.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS Benchy.json	
@@ -57,6 +57,6 @@
     "0"
   ],
   "default_filament_colour": [
-    "#335BBB"
+    ""
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG-CF @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG-CF @base.json
index 86a223a7149..923085c7d56 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG-CF @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG-CF @base.json	
@@ -87,7 +87,7 @@
     "PETG-CF"
   ],
   "default_filament_colour": [
-    "#3D3C39"
+    ""
   ],
   "nozzle_temperature_range_high": [
     "255"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Matte @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Matte @base.json
index 5b99cb36f32..e4afd9075fd 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Matte @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Matte @base.json	
@@ -42,6 +42,6 @@
     "215"
   ],
   "default_filament_colour": [
-    "#EAC3C3"
+    ""
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Metal @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Metal @base.json
index 3ef20715869..0a71e239a98 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Metal @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Metal @base.json	
@@ -45,6 +45,6 @@
     "220"
   ],
   "default_filament_colour": [
-    "#767A7E"
+    ""
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Silk @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Silk @base.json
index c2ddf06aa3e..08e7abef0f0 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Silk @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Silk @base.json	
@@ -54,6 +54,6 @@
     "230"
   ],
   "default_filament_colour": [
-    "#CF942B"
+    ""
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA-CF @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA-CF @base.json
index 644105f3df9..1f8b544e5ac 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA-CF @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA-CF @base.json	
@@ -57,7 +57,7 @@
     "150"
   ],
   "default_filament_colour": [
-    "#3D3C39"
+    ""
   ],
   "filament_type": [
     "PLA-CF"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual TPE.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual TPE.json
index dc50110b2ed..8701a232ea5 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Dual TPE.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual TPE.json	
@@ -56,7 +56,7 @@
     "65"
   ],
   "default_filament_colour": [
-    "#383737"
+    ""
   ],
   "filament_notes": [
     "eSUN eLastic TPE-83A\n"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker J1 ABS Benchy.json b/resources/profiles/Snapmaker/filament/Snapmaker J1 ABS Benchy.json
index 97d656cc38a..9c22f7c4710 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker J1 ABS Benchy.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker J1 ABS Benchy.json	
@@ -84,6 +84,6 @@
     "0"
   ],
   "default_filament_colour": [
-    "#335BBB"
+    ""
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker J1 PETG-CF @base.json b/resources/profiles/Snapmaker/filament/Snapmaker J1 PETG-CF @base.json
index b979f6bdea9..5232980a1f2 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker J1 PETG-CF @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker J1 PETG-CF @base.json	
@@ -60,7 +60,7 @@
     "PETG-CF"
   ],
   "default_filament_colour": [
-    "#3D3C39"
+    ""
   ],
   "nozzle_temperature_range_high": [
     "255"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker J1 PLA Matte @base.json b/resources/profiles/Snapmaker/filament/Snapmaker J1 PLA Matte @base.json
index fdbd3790705..ebfc96f4c36 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker J1 PLA Matte @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker J1 PLA Matte @base.json	
@@ -15,6 +15,6 @@
     "215"
   ],
   "default_filament_colour": [
-    "#EAC3C3"
+    ""
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker J1 PLA Metal @base.json b/resources/profiles/Snapmaker/filament/Snapmaker J1 PLA Metal @base.json
index 3d75258f561..9deb7828a51 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker J1 PLA Metal @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker J1 PLA Metal @base.json	
@@ -18,6 +18,6 @@
     "220"
   ],
   "default_filament_colour": [
-    "#767A7E"
+    ""
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker J1 PLA Silk @base.json b/resources/profiles/Snapmaker/filament/Snapmaker J1 PLA Silk @base.json
index e9fc62b8fc3..2e0829663f4 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker J1 PLA Silk @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker J1 PLA Silk @base.json	
@@ -27,6 +27,6 @@
     "230"
   ],
   "default_filament_colour": [
-    "#CF942B"
+    ""
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker J1 PLA-CF @base.json b/resources/profiles/Snapmaker/filament/Snapmaker J1 PLA-CF @base.json
index aed0f937c68..1ab928b567b 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker J1 PLA-CF @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker J1 PLA-CF @base.json	
@@ -30,7 +30,7 @@
     "150"
   ],
   "default_filament_colour": [
-    "#3D3C39"
+    ""
   ],
   "filament_type": [
     "PLA-CF"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker J1 TPE.json b/resources/profiles/Snapmaker/filament/Snapmaker J1 TPE.json
index e1768a743bd..56fd2a3ece3 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker J1 TPE.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker J1 TPE.json	
@@ -32,7 +32,7 @@
     "65"
   ],
   "default_filament_colour": [
-    "#383737"
+    ""
   ],
   "filament_notes": [
     "eSUN eLastic TPE-83A\n"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 base.json
new file mode 100644
index 00000000000..e870c4bd7d5
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 base.json	
@@ -0,0 +1,56 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "Snapmaker PA-CF @U1 base",
+  "filament_id": "34931774250",
+  "inherits": "fdm_filament_pa",
+  "filament_end_gcode": [
+    ""
+  ],
+  "hot_plate_temp": [
+    "100"
+  ],
+  "hot_plate_temp_initial_layer": [
+    "95"
+  ],
+  "overhang_fan_speed": [
+    "50"
+  ],
+  "filament_flow_ratio": [
+    "0.96"
+  ],
+  "filament_loading_speed_start": [
+    "35"
+  ],
+  "filament_loading_speed": [
+    "35"
+  ],
+  "filament_unloading_speed_start": [
+    "35"
+  ],
+  "filament_unloading_speed": [
+    "35"
+  ],
+  "filament_load_time": [
+    "2"
+  ],
+  "filament_unload_time": [
+    "2"
+  ],
+  "filament_cooling_moves": [
+    "2"
+  ],
+  "filament_cooling_initial_speed": [
+    "35"
+  ],
+  "filament_cooling_final_speed": [
+    "60"
+  ],
+  "fan_max_speed": [
+    "50"
+  ],
+  "fan_min_speed": [
+    "15"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1.json
new file mode 100644
index 00000000000..80ef97e3084
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1.json	
@@ -0,0 +1,13 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "Snapmaker PA-CF @U1",
+  "setting_id": "27996657890",
+  "inherits": "Snapmaker PA-CF @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)",
+    "Snapmaker U1 (0.4 nozzle)",
+    "Snapmaker U1 (0.4 nozzle)"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 base.json
new file mode 100644
index 00000000000..f2ed67a2bd8
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 base.json	
@@ -0,0 +1,53 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "Snapmaker PET @U1 base",
+  "filament_id": "21285779410",
+  "inherits": "fdm_filament_pet",
+  "filament_end_gcode": [
+    ""
+  ],
+  "overhang_fan_speed": [
+    "40"
+  ],
+  "filament_max_volumetric_speed": [
+    "6.8"
+  ],
+  "filament_loading_speed_start": [
+    "35"
+  ],
+  "filament_loading_speed": [
+    "35"
+  ],
+  "filament_unloading_speed_start": [
+    "35"
+  ],
+  "filament_unloading_speed": [
+    "35"
+  ],
+  "filament_load_time": [
+    "2"
+  ],
+  "filament_unload_time": [
+    "2"
+  ],
+  "filament_cooling_moves": [
+    "2"
+  ],
+  "filament_cooling_initial_speed": [
+    "35"
+  ],
+  "filament_cooling_final_speed": [
+    "60"
+  ],
+  "fan_max_speed": [
+    "50"
+  ],
+  "fan_min_speed": [
+    "26"
+  ],
+  "slow_down_min_speed": [
+    "35"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1.json
new file mode 100644
index 00000000000..79da9ec77e9
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1.json	
@@ -0,0 +1,11 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "Snapmaker PET @U1",
+  "setting_id": "42132000450",
+  "inherits": "Snapmaker PET @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json
new file mode 100644
index 00000000000..5e88c82c519
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json	
@@ -0,0 +1,65 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "Snapmaker PETG @U1 base",
+  "filament_id": "22090010620",
+  "inherits": "fdm_filament_petg",
+  "filament_end_gcode": [
+    ""
+  ],
+  "overhang_fan_speed": [
+    "25"
+  ],
+  "filament_density": [
+    "1.25"
+  ],
+  "filament_z_hop_types": [
+    "Spiral Lift"
+  ],
+  "filament_retraction_speed": [
+    "35"
+  ],
+  "filament_loading_speed_start": [
+    "35"
+  ],
+  "filament_loading_speed": [
+    "35"
+  ],
+  "filament_unloading_speed_start": [
+    "35"
+  ],
+  "filament_unloading_speed": [
+    "35"
+  ],
+  "filament_load_time": [
+    "2"
+  ],
+  "filament_unload_time": [
+    "2"
+  ],
+  "filament_cooling_moves": [
+    "2"
+  ],
+  "filament_cooling_initial_speed": [
+    "35"
+  ],
+  "filament_cooling_final_speed": [
+    "60"
+  ],
+  "nozzle_temperature_initial_layer": [
+    "250"
+  ],
+  "temperature_vitrification": [
+    "178"
+  ],
+  "fan_max_speed": [
+    "20"
+  ],
+  "fan_min_speed": [
+    "0"
+  ],
+  "nozzle_temperature_range_low": [
+    "240"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1.json
new file mode 100644
index 00000000000..a45967876d0
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1.json	
@@ -0,0 +1,11 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "Snapmaker PETG @U1",
+  "setting_id": "24520142710",
+  "inherits": "Snapmaker PETG @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 base.json
new file mode 100644
index 00000000000..fa4f6a92f31
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 base.json	
@@ -0,0 +1,95 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "Snapmaker PETG-CF @U1 base",
+  "filament_id": "10425112260",
+  "inherits": "fdm_filament_petg",
+  "filament_end_gcode": [
+    ""
+  ],
+  "required_nozzle_HRC": [
+    "40"
+  ],
+  "overhang_fan_threshold": [
+    "10%"
+  ],
+  "overhang_fan_speed": [
+    "55"
+  ],
+  "fan_cooling_layer_time": [
+    "10"
+  ],
+  "filament_cost": [
+    "40"
+  ],
+  "filament_density": [
+    "1.25"
+  ],
+  "filament_max_volumetric_speed": [
+    "6.4"
+  ],
+  "filament_retraction_minimum_travel": [
+    "nil"
+  ],
+  "filament_retraction_length": [
+    "nil"
+  ],
+  "filament_loading_speed_start": [
+    "35"
+  ],
+  "filament_loading_speed": [
+    "35"
+  ],
+  "filament_unloading_speed_start": [
+    "35"
+  ],
+  "filament_unloading_speed": [
+    "35"
+  ],
+  "filament_load_time": [
+    "2"
+  ],
+  "filament_unload_time": [
+    "2"
+  ],
+  "filament_cooling_moves": [
+    "2"
+  ],
+  "filament_cooling_initial_speed": [
+    "35"
+  ],
+  "filament_cooling_final_speed": [
+    "60"
+  ],
+  "nozzle_temperature_initial_layer": [
+    "250"
+  ],
+  "temperature_vitrification": [
+    "178"
+  ],
+  "fan_max_speed": [
+    "20"
+  ],
+  "fan_min_speed": [
+    "0"
+  ],
+  "slow_down_min_speed": [
+    "10"
+  ],
+  "slow_down_layer_time": [
+    "6"
+  ],
+  "enable_pressure_advance": [
+    "0"
+  ],
+  "filament_type": [
+    "PETG-CF"
+  ],
+  "default_filament_colour": [
+    ""
+  ],
+  "nozzle_temperature_range_high": [
+    "255"
+  ]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json
new file mode 100644
index 00000000000..19ca1db4991
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json	
@@ -0,0 +1,11 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "Snapmaker PETG-CF @U1",
+  "setting_id": "9504590820",
+  "inherits": "Snapmaker PETG-CF @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @base.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @base.json
index 6b63709c017..e8c7794bc63 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @base.json	
@@ -60,7 +60,7 @@
     "PETG-CF"
   ],
   "default_filament_colour": [
-    "#3D3C39"
+    ""
   ],
   "nozzle_temperature_range_high": [
     "255"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json
new file mode 100644
index 00000000000..04947e0840e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json	
@@ -0,0 +1,44 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "Snapmaker PLA @U1 base",
+  "filament_id": "14170311270",
+  "inherits": "fdm_filament_pla",
+  "filament_end_gcode": [
+    ""
+  ],
+  "filament_retraction_length": [
+    "nil"
+  ],
+  "filament_loading_speed_start": [
+    "35"
+  ],
+  "filament_loading_speed": [
+    "35"
+  ],
+  "filament_unloading_speed_start": [
+    "35"
+  ],
+  "filament_unloading_speed": [
+    "35"
+  ],
+  "filament_load_time": [
+    "2"
+  ],
+  "filament_unload_time": [
+    "2"
+  ],
+  "filament_cooling_moves": [
+    "2"
+  ],
+  "filament_cooling_initial_speed": [
+    "35"
+  ],
+  "filament_cooling_final_speed": [
+    "60"
+  ],
+  "nozzle_temperature": [
+    "220"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1.json
new file mode 100644
index 00000000000..d92a90178e8
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1.json	
@@ -0,0 +1,17 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "Snapmaker PLA @U1",
+  "setting_id": "11953139350",
+  "inherits": "Snapmaker PLA @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ],
+  "hot_plate_temp":[
+    "55"
+  ],
+  "hot_plate_temp_initial_layer":[
+    "55"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json
new file mode 100644
index 00000000000..cb9ee034317
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json	
@@ -0,0 +1,44 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "Snapmaker PLA Eco @U1 base",
+  "filament_id": "2008037900",
+  "inherits": "fdm_filament_pla_eco",
+  "filament_end_gcode": [
+    ""
+  ],
+  "filament_density": [
+    "1.26"
+  ],
+  "filament_max_volumetric_speed": [
+    "12"
+  ],
+  "filament_loading_speed_start": [
+    "35"
+  ],
+  "filament_loading_speed": [
+    "35"
+  ],
+  "filament_unloading_speed_start": [
+    "35"
+  ],
+  "filament_unloading_speed": [
+    "35"
+  ],
+  "filament_load_time": [
+    "2"
+  ],
+  "filament_unload_time": [
+    "2"
+  ],
+  "filament_cooling_moves": [
+    "2"
+  ],
+  "filament_cooling_initial_speed": [
+    "35"
+  ],
+  "filament_cooling_final_speed": [
+    "60"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1.json
new file mode 100644
index 00000000000..03c51c7ff62
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1.json	
@@ -0,0 +1,11 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "Snapmaker PLA Eco @U1",
+  "setting_id": "21586560280",
+  "inherits": "Snapmaker PLA Eco @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 base.json
new file mode 100644
index 00000000000..09d34587402
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 base.json	
@@ -0,0 +1,127 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "Snapmaker PLA Lite @U1 base",
+  "filament_id": "1417031127011",
+  "filament_end_gcode": [
+    ""
+  ],
+  "filament_retraction_length": [
+    "nil"
+  ],
+  "filament_loading_speed_start": [
+    "35"
+  ],
+  "filament_loading_speed": [
+    "35"
+  ],
+  "filament_unloading_speed_start": [
+    "35"
+  ],
+  "filament_unloading_speed": [
+    "35"
+  ],
+  "filament_load_time": [
+    "2"
+  ],
+  "filament_unload_time": [
+    "2"
+  ],
+  "filament_cooling_moves": [
+    "2"
+  ],
+  "filament_cooling_initial_speed": [
+    "35"
+  ],
+  "filament_cooling_final_speed": [
+    "60"
+  ],
+  "fan_cooling_layer_time": [
+      "100"
+  ],
+  "filament_max_volumetric_speed": [
+      "12"
+  ],
+  "filament_type": [
+      "PLA"
+  ],
+  "filament_density": [
+      "1.24"
+  ],
+  "filament_cost": [
+      "20"
+  ],
+  "cool_plate_temp" : [
+      "60"
+  ],
+  "eng_plate_temp" : [
+      "60"
+  ],
+  "hot_plate_temp" : [
+      "60"
+  ],
+  "textured_plate_temp" : [
+      "60"
+  ],
+  "cool_plate_temp_initial_layer" : [
+      "60"
+  ],
+  "eng_plate_temp_initial_layer" : [
+      "60"
+  ],
+  "hot_plate_temp_initial_layer" : [
+      "60"
+  ],
+  "textured_plate_temp_initial_layer" : [
+      "60"
+  ],
+  "nozzle_temperature_initial_layer": [
+      "220"
+  ],
+  "reduce_fan_stop_start_freq": [
+      "1"
+  ],
+  "slow_down_for_layer_cooling": [
+      "1"
+  ],
+  "fan_max_speed": [
+      "100"
+  ],
+  "fan_min_speed": [
+      "100"
+  ],
+  "overhang_fan_speed": [
+      "100"
+  ],
+  "overhang_fan_threshold": [
+      "50%"
+  ],
+  "close_fan_the_first_x_layers": [
+      "1"
+  ],
+  "nozzle_temperature": [
+      "220"
+  ],
+  "temperature_vitrification": [
+      "60"
+  ],
+  "nozzle_temperature_range_low": [
+      "190"
+  ],
+  "nozzle_temperature_range_high": [
+      "230"
+  ],
+  "slow_down_min_speed": [
+      "10"
+  ],
+  "slow_down_layer_time": [
+      "4"
+  ],
+  "additional_cooling_fan_speed": [
+      "70"
+  ],
+  "filament_start_gcode": [
+      "; filament start gcode\n"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json
new file mode 100644
index 00000000000..94683e25ff5
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json	
@@ -0,0 +1,285 @@
+{
+    "type": "filament",
+    "from": "system",
+    "instantiation": "true",
+    "name": "Snapmaker PLA Lite @U1",
+    "setting_id": "1195313935011",
+    "inherits": "Snapmaker PLA Lite @U1 base",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "activate_air_filtration": [
+        "0"
+    ],
+    "activate_chamber_temp_control": [
+        "0"
+    ],
+    "adaptive_pressure_advance": [
+        "0"
+    ],
+    "adaptive_pressure_advance_bridges": [
+        "0"
+    ],
+    "adaptive_pressure_advance_model": [
+        "0,0,0\n0,0,0"
+    ],
+    "adaptive_pressure_advance_overhangs": [
+        "0"
+    ],
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "chamber_temperature": [
+        "0"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "compatible_printers_condition": "",
+    "compatible_prints": [],
+    "compatible_prints_condition": "",
+    "complete_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "cool_plate_temp": [
+        "60"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "60"
+    ],
+    "default_filament_colour": [
+    ""
+  ],
+    "dont_slow_down_outer_wall": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "enable_overhang_bridge_fan": [
+        "1"
+    ],
+    "enable_pressure_advance": [
+        "1"
+    ],
+    "eng_plate_temp": [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "60"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_cooling_final_speed": [
+        "3.5"
+    ],
+    "filament_cooling_initial_speed": [
+        "10"
+    ],
+    "filament_cooling_moves": [
+        "2"
+    ],
+    "filament_cost": [
+        "25.4"
+    ],
+    "filament_density": [
+        "1.32"
+    ],
+    "filament_deretraction_speed": [
+        "nil"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_is_support": [
+        "0"
+    ],
+    "filament_loading_speed": [
+        "10"
+    ],
+    "filament_loading_speed_start": [
+        "50"
+    ],
+    "filament_long_retractions_when_cut": [
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_multitool_ramming": [
+        "1"
+    ],
+    "filament_multitool_ramming_flow": [
+        "40"
+    ],
+    "filament_multitool_ramming_volume": [
+        "10"
+    ],
+    "filament_notes": [
+        ""
+    ],
+    "filament_ramming_parameters": [
+        "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+    ],
+    "filament_retract_before_wipe": [
+        "nil"
+    ],
+    "filament_retract_lift_above": [
+        "nil"
+    ],
+    "filament_retract_lift_below": [
+        "nil"
+    ],
+    "filament_retract_lift_enforce": [
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "nil"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "nil"
+    ],
+    "filament_shrink": [
+        "100%"
+    ],
+    "filament_shrinkage_compensation_z": [
+        "100%"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_stamping_distance": [
+        "45"
+    ],
+    "filament_stamping_loading_speed": [
+        "29"
+    ],
+    "filament_start_gcode": [
+        "SET_PRESSURE_ADVANCE ADVANCE=0.02\n; filament start gcode\n"
+    ],
+    "filament_toolchange_delay": [
+        "0"
+    ],
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_unloading_speed": [
+        "100"
+    ],
+    "filament_unloading_speed_start": [
+        "100"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "filament_wipe": [
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "nil"
+    ],
+    "filament_z_hop": [
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "nil"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "hot_plate_temp": [
+        "55"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "55"
+    ],
+    "idle_temperature": [
+        "0"
+    ],
+    "is_custom_defined": "0",
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "pellet_flow_coefficient": [
+        "0.4157"
+    ],
+    "pressure_advance": [
+        "0.02"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "required_nozzle_HRC": [
+        "0"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "support_material_interface_fan_speed": [
+        "-1"
+    ],
+    "temperature_vitrification": [
+        "45"
+    ],
+    "textured_cool_plate_temp": [
+        "40"
+    ],
+    "textured_cool_plate_temp_initial_layer": [
+        "40"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base.json
new file mode 100644
index 00000000000..be5b458fab5
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base.json	
@@ -0,0 +1,127 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "Snapmaker PLA Matte @U1 base",
+  "filament_id": "141703112701",
+  "filament_end_gcode": [
+    ""
+  ],
+  "filament_retraction_length": [
+    "nil"
+  ],
+  "filament_loading_speed_start": [
+    "35"
+  ],
+  "filament_loading_speed": [
+    "35"
+  ],
+  "filament_unloading_speed_start": [
+    "35"
+  ],
+  "filament_unloading_speed": [
+    "35"
+  ],
+  "filament_load_time": [
+    "2"
+  ],
+  "filament_unload_time": [
+    "2"
+  ],
+  "filament_cooling_moves": [
+    "2"
+  ],
+  "filament_cooling_initial_speed": [
+    "35"
+  ],
+  "filament_cooling_final_speed": [
+    "60"
+  ],
+  "fan_cooling_layer_time": [
+      "100"
+  ],
+  "filament_max_volumetric_speed": [
+      "12"
+  ],
+  "filament_type": [
+      "PLA"
+  ],
+  "filament_density": [
+      "1.24"
+  ],
+  "filament_cost": [
+      "20"
+  ],
+  "cool_plate_temp" : [
+      "60"
+  ],
+  "eng_plate_temp" : [
+      "60"
+  ],
+  "hot_plate_temp" : [
+      "60"
+  ],
+  "textured_plate_temp" : [
+      "60"
+  ],
+  "cool_plate_temp_initial_layer" : [
+      "60"
+  ],
+  "eng_plate_temp_initial_layer" : [
+      "60"
+  ],
+  "hot_plate_temp_initial_layer" : [
+      "60"
+  ],
+  "textured_plate_temp_initial_layer" : [
+      "60"
+  ],
+  "nozzle_temperature_initial_layer": [
+      "220"
+  ],
+  "reduce_fan_stop_start_freq": [
+      "1"
+  ],
+  "slow_down_for_layer_cooling": [
+      "1"
+  ],
+  "fan_max_speed": [
+      "100"
+  ],
+  "fan_min_speed": [
+      "100"
+  ],
+  "overhang_fan_speed": [
+      "100"
+  ],
+  "overhang_fan_threshold": [
+      "50%"
+  ],
+  "close_fan_the_first_x_layers": [
+      "1"
+  ],
+  "nozzle_temperature": [
+      "220"
+  ],
+  "temperature_vitrification": [
+      "60"
+  ],
+  "nozzle_temperature_range_low": [
+      "190"
+  ],
+  "nozzle_temperature_range_high": [
+      "230"
+  ],
+  "slow_down_min_speed": [
+      "10"
+  ],
+  "slow_down_layer_time": [
+      "4"
+  ],
+  "additional_cooling_fan_speed": [
+      "70"
+  ],
+  "filament_start_gcode": [
+      "; filament start gcode\n"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json
new file mode 100644
index 00000000000..269db116b29
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json	
@@ -0,0 +1,285 @@
+{
+    "type": "filament",
+    "from": "system",
+    "instantiation": "true",
+    "name": "Snapmaker PLA Matte @U1",
+    "setting_id": "119531393501",
+    "inherits": "Snapmaker PLA @U1 base",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "activate_air_filtration": [
+        "0"
+    ],
+    "activate_chamber_temp_control": [
+        "0"
+    ],
+    "adaptive_pressure_advance": [
+        "0"
+    ],
+    "adaptive_pressure_advance_bridges": [
+        "0"
+    ],
+    "adaptive_pressure_advance_model": [
+        "0,0,0\n0,0,0"
+    ],
+    "adaptive_pressure_advance_overhangs": [
+        "0"
+    ],
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "chamber_temperature": [
+        "0"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "compatible_printers_condition": "",
+    "compatible_prints": [],
+    "compatible_prints_condition": "",
+    "complete_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "cool_plate_temp": [
+        "60"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "60"
+    ],
+    "default_filament_colour": [
+    ""
+  ],
+    "dont_slow_down_outer_wall": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "70"
+    ],
+    "enable_overhang_bridge_fan": [
+        "1"
+    ],
+    "enable_pressure_advance": [
+        "1"
+    ],
+    "eng_plate_temp": [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "60"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_cooling_final_speed": [
+        "3.5"
+    ],
+    "filament_cooling_initial_speed": [
+        "10"
+    ],
+    "filament_cooling_moves": [
+        "2"
+    ],
+    "filament_cost": [
+        "25.4"
+    ],
+    "filament_density": [
+        "1.32"
+    ],
+    "filament_deretraction_speed": [
+        "nil"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": [
+        "1.01"
+    ],
+    "filament_is_support": [
+        "0"
+    ],
+    "filament_loading_speed": [
+        "10"
+    ],
+    "filament_loading_speed_start": [
+        "50"
+    ],
+    "filament_long_retractions_when_cut": [
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_multitool_ramming": [
+        "1"
+    ],
+    "filament_multitool_ramming_flow": [
+        "40"
+    ],
+    "filament_multitool_ramming_volume": [
+        "5"
+    ],
+    "filament_notes": [
+        ""
+    ],
+    "filament_ramming_parameters": [
+        "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+    ],
+    "filament_retract_before_wipe": [
+        "nil"
+    ],
+    "filament_retract_lift_above": [
+        "nil"
+    ],
+    "filament_retract_lift_below": [
+        "nil"
+    ],
+    "filament_retract_lift_enforce": [
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "nil"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "nil"
+    ],
+    "filament_shrink": [
+        "100%"
+    ],
+    "filament_shrinkage_compensation_z": [
+        "100%"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_stamping_distance": [
+        "45"
+    ],
+    "filament_stamping_loading_speed": [
+        "29"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_toolchange_delay": [
+        "0"
+    ],
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_unloading_speed": [
+        "100"
+    ],
+    "filament_unloading_speed_start": [
+        "100"
+    ],
+    "filament_vendor": [
+        "Snapmaker"
+    ],
+    "filament_wipe": [
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "nil"
+    ],
+    "filament_z_hop": [
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "nil"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "hot_plate_temp": [
+        "55"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "55"
+    ],
+    "idle_temperature": [
+        "0"
+    ],
+    "is_custom_defined": "0",
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "pellet_flow_coefficient": [
+        "0.4157"
+    ],
+    "pressure_advance": [
+        "0.02"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "required_nozzle_HRC": [
+        "0"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "support_material_interface_fan_speed": [
+        "-1"
+    ],
+    "temperature_vitrification": [
+        "45"
+    ],
+    "textured_cool_plate_temp": [
+        "40"
+    ],
+    "textured_cool_plate_temp_initial_layer": [
+        "40"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json
new file mode 100644
index 00000000000..fe8d2b53986
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json	
@@ -0,0 +1,53 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "Snapmaker PLA Metal @U1 base",
+  "filament_id": "20299943460",
+  "inherits": "fdm_filament_pla",
+  "filament_end_gcode": [
+    ""
+  ],
+  "filament_cost": [
+    "90"
+  ],
+  "filament_density": [
+    "1.25"
+  ],
+  "filament_max_volumetric_speed": [
+    "16"
+  ],
+  "filament_loading_speed_start": [
+    "35"
+  ],
+  "filament_loading_speed": [
+    "35"
+  ],
+  "filament_unloading_speed_start": [
+    "35"
+  ],
+  "filament_unloading_speed": [
+    "35"
+  ],
+  "filament_load_time": [
+    "2"
+  ],
+  "filament_unload_time": [
+    "2"
+  ],
+  "filament_cooling_moves": [
+    "2"
+  ],
+  "filament_cooling_initial_speed": [
+    "35"
+  ],
+  "filament_cooling_final_speed": [
+    "60"
+  ],
+  "nozzle_temperature": [
+    "220"
+  ],
+  "default_filament_colour": [
+    ""
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1.json
new file mode 100644
index 00000000000..fec713c9be4
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1.json	
@@ -0,0 +1,11 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "Snapmaker PLA Metal @U1",
+  "setting_id": "7206646270",
+  "inherits": "Snapmaker PLA Metal @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json
new file mode 100644
index 00000000000..08893fac88f
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json	
@@ -0,0 +1,62 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "Snapmaker PLA Silk @U1 base",
+  "filament_id": "11813638720",
+  "inherits": "fdm_filament_pla",
+  "filament_end_gcode": [
+    ""
+  ],
+  "hot_plate_temp_initial_layer": [
+    "65"
+  ],
+  "filament_cost": [
+    "70"
+  ],
+  "filament_density": [
+    "1.32"
+  ],
+  "filament_max_volumetric_speed": [
+    "12"
+  ],
+  "filament_retraction_length": [
+    "0.5"
+  ],
+  "filament_loading_speed_start": [
+    "35"
+  ],
+  "filament_loading_speed": [
+    "35"
+  ],
+  "filament_unloading_speed_start": [
+    "35"
+  ],
+  "filament_unloading_speed": [
+    "35"
+  ],
+  "filament_load_time": [
+    "2"
+  ],
+  "filament_unload_time": [
+    "2"
+  ],
+  "filament_cooling_moves": [
+    "2"
+  ],
+  "filament_cooling_initial_speed": [
+    "35"
+  ],
+  "filament_cooling_final_speed": [
+    "60"
+  ],
+  "nozzle_temperature_initial_layer": [
+    "230"
+  ],
+  "nozzle_temperature": [
+    "230"
+  ],
+  "default_filament_colour": [
+    ""
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json
new file mode 100644
index 00000000000..d67a1f3badb
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json	
@@ -0,0 +1,11 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "Snapmaker PLA Silk @U1",
+  "setting_id": "13282506860",
+  "inherits": "Snapmaker PLA Silk @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @base.json
index bc0c710e541..37148fdd38f 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @base.json	
@@ -18,6 +18,6 @@
     "0.5"
   ],
   "default_filament_colour": [
-    "#CF942B"
+    ""
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base.json
new file mode 100644
index 00000000000..cd0cd6710b2
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base.json	
@@ -0,0 +1,127 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "Snapmaker PLA SnapSpeed @U1 base",
+  "filament_id": "141703112701",
+  "filament_end_gcode": [
+    ""
+  ],
+  "filament_retraction_length": [
+    "nil"
+  ],
+  "filament_loading_speed_start": [
+    "35"
+  ],
+  "filament_loading_speed": [
+    "35"
+  ],
+  "filament_unloading_speed_start": [
+    "35"
+  ],
+  "filament_unloading_speed": [
+    "35"
+  ],
+  "filament_load_time": [
+    "2"
+  ],
+  "filament_unload_time": [
+    "2"
+  ],
+  "filament_cooling_moves": [
+    "2"
+  ],
+  "filament_cooling_initial_speed": [
+    "35"
+  ],
+  "filament_cooling_final_speed": [
+    "60"
+  ],
+  "fan_cooling_layer_time": [
+      "100"
+  ],
+  "filament_max_volumetric_speed": [
+      "12"
+  ],
+  "filament_type": [
+      "PLA"
+  ],
+  "filament_density": [
+      "1.24"
+  ],
+  "filament_cost": [
+      "20"
+  ],
+  "cool_plate_temp" : [
+      "60"
+  ],
+  "eng_plate_temp" : [
+      "60"
+  ],
+  "hot_plate_temp" : [
+      "60"
+  ],
+  "textured_plate_temp" : [
+      "60"
+  ],
+  "cool_plate_temp_initial_layer" : [
+      "60"
+  ],
+  "eng_plate_temp_initial_layer" : [
+      "60"
+  ],
+  "hot_plate_temp_initial_layer" : [
+      "60"
+  ],
+  "textured_plate_temp_initial_layer" : [
+      "60"
+  ],
+  "nozzle_temperature_initial_layer": [
+      "220"
+  ],
+  "reduce_fan_stop_start_freq": [
+      "1"
+  ],
+  "slow_down_for_layer_cooling": [
+      "1"
+  ],
+  "fan_max_speed": [
+      "100"
+  ],
+  "fan_min_speed": [
+      "100"
+  ],
+  "overhang_fan_speed": [
+      "100"
+  ],
+  "overhang_fan_threshold": [
+      "50%"
+  ],
+  "close_fan_the_first_x_layers": [
+      "1"
+  ],
+  "nozzle_temperature": [
+      "220"
+  ],
+  "temperature_vitrification": [
+      "60"
+  ],
+  "nozzle_temperature_range_low": [
+      "190"
+  ],
+  "nozzle_temperature_range_high": [
+      "230"
+  ],
+  "slow_down_min_speed": [
+      "10"
+  ],
+  "slow_down_layer_time": [
+      "4"
+  ],
+  "additional_cooling_fan_speed": [
+      "70"
+  ],
+  "filament_start_gcode": [
+      "; filament start gcode\n"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json
new file mode 100644
index 00000000000..777fcd0655a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json	
@@ -0,0 +1,284 @@
+{
+    "type": "filament",
+    "from": "system",
+    "instantiation": "true",
+    "name": "Snapmaker PLA SnapSpeed @U1",
+    "setting_id": "119531393501",
+    "inherits": "Snapmaker PLA SnapSpeed @U1 base",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "activate_air_filtration": [
+        "0"
+    ],
+    "activate_chamber_temp_control": [
+        "0"
+    ],
+    "adaptive_pressure_advance": [
+        "0"
+    ],
+    "adaptive_pressure_advance_bridges": [
+        "0"
+    ],
+    "adaptive_pressure_advance_model": [
+        "0,0,0\n0,0,0"
+    ],
+    "adaptive_pressure_advance_overhangs": [
+        "0"
+    ],
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "chamber_temperature": [
+        "0"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "compatible_printers_condition": "",
+    "compatible_prints": [],
+    "compatible_prints_condition": "",
+    "complete_print_exhaust_fan_speed": [
+        "80"
+    ],
+    "cool_plate_temp": [
+        "60"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "60"
+    ],
+    "default_filament_colour": [
+    ""
+  ],
+    "dont_slow_down_outer_wall": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "60"
+    ],
+    "enable_overhang_bridge_fan": [
+        "1"
+    ],
+    "enable_pressure_advance": [
+        "1"
+    ],
+    "eng_plate_temp": [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "60"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_cooling_final_speed": [
+        "3.5"
+    ],
+    "filament_cooling_initial_speed": [
+        "10"
+    ],
+    "filament_cooling_moves": [
+        "2"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_deretraction_speed": [
+        "nil"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": [
+        "0.99"
+    ],
+    "filament_is_support": [
+        "0"
+    ],
+    "filament_loading_speed": [
+        "10"
+    ],
+    "filament_loading_speed_start": [
+        "50"
+    ],
+    "filament_long_retractions_when_cut": [
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_multitool_ramming": [
+        "1"
+    ],
+    "filament_multitool_ramming_flow": [
+        "40"
+    ],
+    "filament_multitool_ramming_volume": [
+        "5"
+    ],
+    "filament_notes": [
+        ""
+    ],
+    "filament_ramming_parameters": [
+        "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+    ],
+    "filament_retract_before_wipe": [
+        "nil"
+    ],
+    "filament_retract_lift_above": [
+        "nil"
+    ],
+    "filament_retract_lift_below": [
+        "nil"
+    ],
+    "filament_retract_lift_enforce": [
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.8"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "30"
+    ],
+    "filament_shrink": [
+        "100%"
+    ],
+    "filament_shrinkage_compensation_z": [
+        "100%"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_stamping_distance": [
+        "45"
+    ],
+    "filament_stamping_loading_speed": [
+        "29"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_toolchange_delay": [
+        "0"
+    ],
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_unloading_speed": [
+        "100"
+    ],
+    "filament_unloading_speed_start": [
+        "100"
+    ],
+    "filament_vendor": [
+        "Snapmaker"
+    ],
+    "filament_wipe": [
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "nil"
+    ],
+    "filament_z_hop": [
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "nil"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "hot_plate_temp": [
+        "55"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "55"
+    ],
+    "idle_temperature": [
+        "0"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "230"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "pellet_flow_coefficient": [
+        "0.4157"
+    ],
+    "pressure_advance": [
+        "0.026"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "required_nozzle_HRC": [
+        "0"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "support_material_interface_fan_speed": [
+        "-1"
+    ],
+    "temperature_vitrification": [
+        "60"
+    ],
+    "textured_cool_plate_temp": [
+        "40"
+    ],
+    "textured_cool_plate_temp_initial_layer": [
+        "40"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json
new file mode 100644
index 00000000000..09c35e6970d
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json	
@@ -0,0 +1,77 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "Snapmaker PLA-CF @U1 base",
+  "filament_id": "17021473250",
+  "inherits": "fdm_filament_pla",
+  "filament_end_gcode": [
+    ""
+  ],
+  "required_nozzle_HRC": [
+    "40"
+  ],
+  "hot_plate_temp": [
+    "55"
+  ],
+  "hot_plate_temp_initial_layer": [
+    "55"
+  ],
+  "filament_density": [
+    "1.22"
+  ],
+  "filament_max_volumetric_speed": [
+    "15"
+  ],
+  "filament_loading_speed_start": [
+    "35"
+  ],
+  "filament_loading_speed": [
+    "35"
+  ],
+  "filament_unloading_speed_start": [
+    "35"
+  ],
+  "filament_unloading_speed": [
+    "35"
+  ],
+  "filament_load_time": [
+    "2"
+  ],
+  "filament_unload_time": [
+    "2"
+  ],
+  "filament_cooling_moves": [
+    "2"
+  ],
+  "filament_cooling_initial_speed": [
+    "35"
+  ],
+  "filament_cooling_final_speed": [
+    "60"
+  ],
+  "nozzle_temperature_initial_layer": [
+    "230"
+  ],
+  "nozzle_temperature": [
+    "230"
+  ],
+  "temperature_vitrification": [
+    "150"
+  ],
+  "default_filament_colour": [
+    ""
+  ],
+  "filament_type": [
+    "PLA-CF"
+  ],
+  "nozzle_temperature_range_low": [
+    "210"
+  ],
+  "nozzle_temperature_range_high": [
+    "250"
+  ],
+  "additional_cooling_fan_speed": [
+    "0"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1.json
new file mode 100644
index 00000000000..7a870c11cf0
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1.json	
@@ -0,0 +1,11 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "Snapmaker PLA-CF @U1",
+  "setting_id": "35893594380",
+  "inherits": "Snapmaker PLA-CF @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @base.json
index 52ff64362d8..fa43b8ce24d 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @base.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @base.json	
@@ -21,7 +21,7 @@
     "7"
   ],
   "default_filament_colour": [
-    "#3D3C39"
+    ""
   ],
   "filament_type": [
     "PLA-CF"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json
new file mode 100644
index 00000000000..3b4da2a815e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json	
@@ -0,0 +1,41 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "Snapmaker PVA @U1 base",
+  "filament_id": "31046369800",
+  "inherits": "fdm_filament_pva",
+  "filament_end_gcode": [
+    ""
+  ],
+  "filament_loading_speed_start": [
+    "35"
+  ],
+  "filament_loading_speed": [
+    "35"
+  ],
+  "filament_unloading_speed_start": [
+    "35"
+  ],
+  "filament_unloading_speed": [
+    "35"
+  ],
+  "filament_load_time": [
+    "2"
+  ],
+  "filament_unload_time": [
+    "2"
+  ],
+  "filament_cooling_moves": [
+    "2"
+  ],
+  "filament_cooling_initial_speed": [
+    "35"
+  ],
+  "filament_cooling_final_speed": [
+    "60"
+  ],
+  "slow_down_layer_time": [
+    "8"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json
new file mode 100644
index 00000000000..e4622e6bfd3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json	
@@ -0,0 +1,11 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "Snapmaker PVA @U1",
+  "setting_id": "41452139080",
+  "inherits": "Snapmaker PVA @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json
new file mode 100644
index 00000000000..c186dd07d85
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json	
@@ -0,0 +1,41 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "Snapmaker TPE @U1",
+  "setting_id": "27040303590",
+  "inherits": "Snapmaker TPU @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ],
+  "hot_plate_temp": [
+    "45"
+  ],
+  "hot_plate_temp_initial_layer": [
+    "45"
+  ],
+  "overhang_fan_speed": [
+    "65"
+  ],
+  "filament_flow_ratio": [
+    "1.1"
+  ],
+  "filament_density": [
+    "1.22"
+  ],
+  "filament_max_volumetric_speed": [
+    "7.2"
+  ],
+  "fan_max_speed": [
+    "65"
+  ],
+  "fan_min_speed": [
+    "65"
+  ],
+  "default_filament_colour": [
+    ""
+  ],
+  "filament_notes": [
+    "eSUN eLastic TPE-83A\n"
+  ]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPE.json b/resources/profiles/Snapmaker/filament/Snapmaker TPE.json
index fa38a7a6247..680d1ddaa97 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPE.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPE.json	
@@ -56,7 +56,7 @@
     "100"
   ],
   "default_filament_colour": [
-    "#383737"
+    ""
   ],
   "filament_notes": [
     "eSUN eLastic TPE-83A\n"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json
new file mode 100644
index 00000000000..801c0ba690d
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json	
@@ -0,0 +1,159 @@
+{
+    "type": "filament",
+    "from": "system",
+    "instantiation": "false",
+    "name": "Snapmaker TPU 95A @U1 base",
+    "filament_id": "297165629001",
+
+    "overhang_fan_threshold": [
+        "95%"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": [
+        "1"
+    ],
+    "filament_deretraction_speed": [
+        "nil"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil"
+    ],
+    "filament_retract_before_wipe": [
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil"
+    ],
+    "filament_z_hop": [
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "nil"
+    ],
+    "filament_settings_id": [
+        ""
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_vendor": [
+        "Generic"
+    ],
+    "filament_wipe": [
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "nil"
+    ],
+    "bed_type": [
+        "Cool Plate"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+
+
+
+    "cool_plate_temp" : [
+        "30"
+    ],
+    "eng_plate_temp" : [
+        "30"
+    ],
+    "hot_plate_temp" : [
+        "35"
+    ],
+    "textured_plate_temp" : [
+        "35"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "30"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "30"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "35"
+    ],
+    "textured_plate_temp_initial_layer" : [
+        "35"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_type": [
+        "TPU"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_retraction_length": [
+        "0.4"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "240"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "nozzle_temperature": [
+        "240"
+    ],
+    "temperature_vitrification": [
+        "60"
+    ],
+    "nozzle_temperature_range_low": [
+        "200"
+    ],
+    "nozzle_temperature_range_high": [
+        "250"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+    
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json
new file mode 100644
index 00000000000..9807c3ef7cd
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json	
@@ -0,0 +1,287 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "Snapmaker TPU 95A @U1",
+  "setting_id": "316428530",
+  "inherits": "Snapmaker TPU 95A @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ],
+
+
+  "activate_air_filtration": [
+        "0"
+    ],
+    "activate_chamber_temp_control": [
+        "0"
+    ],
+    "adaptive_pressure_advance": [
+        "0"
+    ],
+    "adaptive_pressure_advance_bridges": [
+        "0"
+    ],
+    "adaptive_pressure_advance_model": [
+        "0,0,0\n0,0,0"
+    ],
+    "adaptive_pressure_advance_overhangs": [
+        "0"
+    ],
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "chamber_temperature": [
+        "0"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "compatible_printers_condition": "",
+    "compatible_prints": [],
+    "compatible_prints_condition": "",
+    "complete_print_exhaust_fan_speed": [
+        "80"
+    ],
+    "cool_plate_temp": [
+        "30"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "30"
+    ],
+    "dont_slow_down_outer_wall": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "60"
+    ],
+    "enable_overhang_bridge_fan": [
+        "1"
+    ],
+    "enable_pressure_advance": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "30"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "30"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "fan_max_speed": [
+        "70"
+    ],
+    "fan_min_speed": [
+        "70"
+    ],
+    "filament_cooling_final_speed": [
+        "3.4"
+    ],
+    "filament_cooling_initial_speed": [
+        "2.2"
+    ],
+    "filament_cooling_moves": [
+        "4"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_deretraction_speed": [
+        "8"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": [
+        "1"
+    ],
+    "filament_is_support": [
+        "0"
+    ],
+    "filament_loading_speed": [
+        "28"
+    ],
+    "filament_loading_speed_start": [
+        "3"
+    ],
+    "filament_long_retractions_when_cut": [
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "3.2"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_multitool_ramming": [
+        "0"
+    ],
+    "filament_multitool_ramming_flow": [
+        "10"
+    ],
+    "filament_multitool_ramming_volume": [
+        "10"
+    ],
+    "filament_notes": [
+        ""
+    ],
+    "filament_ramming_parameters": [
+        "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+    ],
+    "filament_retract_before_wipe": [
+        "nil"
+    ],
+    "filament_retract_lift_above": [
+        "nil"
+    ],
+    "filament_retract_lift_below": [
+        "nil"
+    ],
+    "filament_retract_lift_enforce": [
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "1.4"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "30"
+    ],
+    "filament_shrink": [
+        "100%"
+    ],
+    "filament_shrinkage_compensation_z": [
+        "100%"
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_stamping_distance": [
+        "0"
+    ],
+    "filament_stamping_loading_speed": [
+        "0"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_toolchange_delay": [
+        "0"
+    ],
+    "filament_type": [
+        "TPU"
+    ],
+    "filament_unloading_speed": [
+        "90"
+    ],
+    "filament_unloading_speed_start": [
+        "100"
+    ],
+    "filament_vendor": [
+        "Generic"
+    ],
+    "filament_wipe": [
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "nil"
+    ],
+    "filament_z_hop": [
+        "0.4"
+    ],
+    "filament_z_hop_types": [
+        "Auto Lift"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "hot_plate_temp": [
+        "55"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "55"
+    ],
+    "idle_temperature": [
+        "0"
+    ],
+    "nozzle_temperature": [
+        "225"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "225"
+    ],
+    "nozzle_temperature_range_high": [
+        "250"
+    ],
+    "nozzle_temperature_range_low": [
+        "200"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "overhang_fan_threshold": [
+        "95%"
+    ],
+    "pellet_flow_coefficient": [
+        "0.4157"
+    ],
+    "pressure_advance": [
+        "0.02"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "required_nozzle_HRC": [
+        "0"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "support_material_interface_fan_speed": [
+        "-1"
+    ],
+    "temperature_vitrification": [
+        "60"
+    ],
+    "textured_cool_plate_temp": [
+        "40"
+    ],
+    "textured_cool_plate_temp_initial_layer": [
+        "40"
+    ],
+    "textured_plate_temp": [
+        "35"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "35"
+    ],
+    "default_filament_colour": [
+    ""
+  ]
+  
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 base.json
new file mode 100644
index 00000000000..97180f569ae
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 base.json	
@@ -0,0 +1,38 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "false",
+  "name": "Snapmaker TPU @U1 base",
+  "filament_id": "29716562900",
+  "inherits": "fdm_filament_tpu",
+  "filament_end_gcode": [
+    ""
+  ],
+  "filament_loading_speed_start": [
+    "35"
+  ],
+  "filament_loading_speed": [
+    "35"
+  ],
+  "filament_unloading_speed_start": [
+    "35"
+  ],
+  "filament_unloading_speed": [
+    "35"
+  ],
+  "filament_load_time": [
+    "2"
+  ],
+  "filament_unload_time": [
+    "2"
+  ],
+  "filament_cooling_moves": [
+    "2"
+  ],
+  "filament_cooling_initial_speed": [
+    "35"
+  ],
+  "filament_cooling_final_speed": [
+    "60"
+  ]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json
new file mode 100644
index 00000000000..1d00d0800d9
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json	
@@ -0,0 +1,13 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "Snapmaker TPU @U1",
+  "setting_id": "31642856830",
+  "inherits": "Snapmaker TPU @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)",
+    "Snapmaker U1 (0.6 nozzle)",
+    "Snapmaker U1 (0.8 nozzle)"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json
new file mode 100644
index 00000000000..bbfd209a0a3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json	
@@ -0,0 +1,31 @@
+{
+  "type": "filament",
+  "from": "system",
+  "instantiation": "true",
+  "name": "Snapmaker TPU High-Flow @U1",
+  "setting_id": "10729188540",
+  "inherits": "Snapmaker TPU @U1 base",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)",
+    "Snapmaker U1 (0.6 nozzle)",
+    "Snapmaker U1 (0.8 nozzle)"
+  ],
+  "filament_flow_ratio": [
+    "0.983"
+  ],
+  "filament_deretraction_speed": [
+    "nil"
+  ],
+  "filament_max_volumetric_speed": [
+    "7.6"
+  ],
+  "filament_retraction_length": [
+    "0.8"
+  ],
+  "filament_retraction_speed": [
+    "nil"
+  ],
+  "filament_notes": [
+    "!! It needs to be dried before use.\nSnapmaker TPU 95A High-Flow\n"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/fdm_filament_abs.json b/resources/profiles/Snapmaker/filament/fdm_filament_abs.json
index ddf59e95a3c..9ef5f8995d3 100644
--- a/resources/profiles/Snapmaker/filament/fdm_filament_abs.json
+++ b/resources/profiles/Snapmaker/filament/fdm_filament_abs.json
@@ -80,7 +80,7 @@
     "280"
   ],
   "default_filament_colour": [
-    "#682D35"
+    ""
   ],
   "filament_notes": [
     "eSUN ABS+\nSunlu ABS+\n"
diff --git a/resources/profiles/Snapmaker/filament/fdm_filament_asa.json b/resources/profiles/Snapmaker/filament/fdm_filament_asa.json
index 79961c53aa4..97275734f04 100644
--- a/resources/profiles/Snapmaker/filament/fdm_filament_asa.json
+++ b/resources/profiles/Snapmaker/filament/fdm_filament_asa.json
@@ -71,7 +71,7 @@
     "ASA"
   ],
   "default_filament_colour": [
-    "#F35887"
+    ""
   ],
   "nozzle_temperature_range_low": [
     "240"
diff --git a/resources/profiles/Snapmaker/filament/fdm_filament_breakaway.json b/resources/profiles/Snapmaker/filament/fdm_filament_breakaway.json
index 73addc11186..af9e1006903 100644
--- a/resources/profiles/Snapmaker/filament/fdm_filament_breakaway.json
+++ b/resources/profiles/Snapmaker/filament/fdm_filament_breakaway.json
@@ -38,7 +38,7 @@
     "154"
   ],
   "default_filament_colour": [
-    "#ffffff"
+    ""
   ],
   "filament_type": [
     "Breakaway Support"
diff --git a/resources/profiles/Snapmaker/filament/fdm_filament_pa.json b/resources/profiles/Snapmaker/filament/fdm_filament_pa.json
index 983d97901d5..ccfc48ea989 100644
--- a/resources/profiles/Snapmaker/filament/fdm_filament_pa.json
+++ b/resources/profiles/Snapmaker/filament/fdm_filament_pa.json
@@ -71,7 +71,7 @@
     "20"
   ],
   "default_filament_colour": [
-    "#3D3C39"
+    ""
   ],
   "filament_type": [
     "PA-CF"
diff --git a/resources/profiles/Snapmaker/filament/fdm_filament_pet.json b/resources/profiles/Snapmaker/filament/fdm_filament_pet.json
index 78d45a587c7..3d53160a4d8 100644
--- a/resources/profiles/Snapmaker/filament/fdm_filament_pet.json
+++ b/resources/profiles/Snapmaker/filament/fdm_filament_pet.json
@@ -56,7 +56,7 @@
     "0.022"
   ],
   "default_filament_colour": [
-    "#FFFFFF"
+    ""
   ],
   "filament_type": [
     "PET"
diff --git a/resources/profiles/Snapmaker/filament/fdm_filament_petg.json b/resources/profiles/Snapmaker/filament/fdm_filament_petg.json
index 81bbe9eef81..67796da67e5 100644
--- a/resources/profiles/Snapmaker/filament/fdm_filament_petg.json
+++ b/resources/profiles/Snapmaker/filament/fdm_filament_petg.json
@@ -65,7 +65,7 @@
     "0.03"
   ],
   "default_filament_colour": [
-    "#DF6734"
+    ""
   ],
   "filament_type": [
     "PETG"
diff --git a/resources/profiles/Snapmaker/filament/fdm_filament_pla.json b/resources/profiles/Snapmaker/filament/fdm_filament_pla.json
index f8c982cc3b4..a758f99718c 100644
--- a/resources/profiles/Snapmaker/filament/fdm_filament_pla.json
+++ b/resources/profiles/Snapmaker/filament/fdm_filament_pla.json
@@ -56,7 +56,7 @@
     "0.02"
   ],
   "default_filament_colour": [
-    "#F8C827"
+    ""
   ],
   "filament_type": [
     "PLA"
diff --git a/resources/profiles/Snapmaker/filament/fdm_filament_pla_eco.json b/resources/profiles/Snapmaker/filament/fdm_filament_pla_eco.json
index a2a1b86e3d3..9e40760c9d3 100644
--- a/resources/profiles/Snapmaker/filament/fdm_filament_pla_eco.json
+++ b/resources/profiles/Snapmaker/filament/fdm_filament_pla_eco.json
@@ -11,6 +11,6 @@
     "200"
   ],
   "default_filament_colour": [
-    "#D5DDDC"
+    ""
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/filament/fdm_filament_pva.json b/resources/profiles/Snapmaker/filament/fdm_filament_pva.json
index d4c778d1c1c..abe935fd9a7 100644
--- a/resources/profiles/Snapmaker/filament/fdm_filament_pva.json
+++ b/resources/profiles/Snapmaker/filament/fdm_filament_pva.json
@@ -50,7 +50,7 @@
     "7"
   ],
   "default_filament_colour": [
-    "#D9DFE3"
+    ""
   ],
   "filament_type": [
     "PVA"
diff --git a/resources/profiles/Snapmaker/filament/fdm_filament_tpu.json b/resources/profiles/Snapmaker/filament/fdm_filament_tpu.json
index 689c2ab0dd1..0efa0faf7d0 100644
--- a/resources/profiles/Snapmaker/filament/fdm_filament_tpu.json
+++ b/resources/profiles/Snapmaker/filament/fdm_filament_tpu.json
@@ -71,7 +71,7 @@
     "0.01"
   ],
   "default_filament_colour": [
-    "#302730"
+    ""
   ],
   "filament_type": [
     "TPU"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json
new file mode 100644
index 00000000000..788cddd701e
--- /dev/null
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json	
@@ -0,0 +1,199 @@
+{
+    "type": "machine",
+    "setting_id": "1591507869",
+    "name": "Snapmaker U1 (0.4 nozzle)",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_U1",
+    "printer_model": "Snapmaker U1",
+    "printer_variant": "0.4",
+    "auxiliary_fan": "1",
+    "change_filament_gcode": "; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\n\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n      speed_toolchange = travel_speed;\nendif\n\"G91\nG0 Z1.5 F600\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n      \"\n\";\n      \"; \" + layer_num + \"\n\";\n      if layer_num == 0 then\n            \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n      else\n            \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n      endif\nendif\n\"T\" + next_extruder + \"\n\";\n}\nM400\n{if filament_type[next_extruder] == \"PVA\"}\nSET_VELOCITY_LIMIT ACCEL=3000\n{else}\n{endif}",
+    "extruder_colour": [
+        "#FCE94F",
+        "#FCE94F",
+        "#FCE94F",
+        "#FCE94F"
+    ],
+    "extruder_offset": [
+        "0x0",
+        "0x0",
+        "0x0",
+        "0x0"
+    ],
+    "host_type": "octoprint",
+    "is_custom_defined": "0",
+    "long_retractions_when_cut": [
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "machine_end_gcode": " PRINT_END\nTIMELAPSE_STOP",
+    "machine_max_jerk_z": [
+        "3",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "30",
+        "25"
+    ],
+    "machine_max_speed_z": [
+        "20",
+        "12"
+    ],
+    "machine_tool_change_time": "5",
+    "max_layer_height": [
+        "0.32",
+        "0.32",
+        "0.32",
+        "0.32"
+    ],
+    "min_layer_height": [
+        "0.08",
+        "0.08",
+        "0.08",
+        "0.08"
+    ],
+    "nozzle_diameter": [
+        "0.4",
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "nozzle_type": "hardened_steel",
+    "printable_area": [
+        "-0.5x-1",
+        "270.5x-1",
+        "270.5x271",
+        "-0.5x271"
+    ],
+    "printable_height": "270",
+    "printer_settings_id": "MyToolChanger 0.4 nozzle - Copy",
+    "retract_before_wipe": [
+        "0%",
+        "0%",
+        "0%",
+        "0%"
+    ],
+    "retract_length_toolchange": [
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "retract_lift_above": [
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "retract_lift_below": [
+        "269",
+        "269",
+        "269",
+        "269"
+    ],
+    "retract_lift_enforce": [
+        "All Surfaces",
+        "All Surfaces",
+        "All Surfaces",
+        "All Surfaces"
+    ],
+    "retract_restart_extra": [
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "retract_when_changing_layer": [
+        "1",
+        "1",
+        "1",
+        "1"
+    ],
+    "retraction_distances_when_cut": [
+        "18",
+        "18",
+        "18",
+        "18"
+    ],
+    "retraction_length": [
+        "0.8",
+        "0.8",
+        "0.8",
+        "0.8"
+    ],
+    "retraction_minimum_travel": [
+        "1",
+        "1",
+        "1",
+        "1"
+    ],
+    "retraction_speed": [
+        "40",
+        "40",
+        "40",
+        "40"
+    ],
+    "deretraction_speed": [
+        "35",
+        "35",
+        "35",
+        "35"
+    ],
+    "thumbnails": "48x48/PNG, 300x300/PNG",
+    "travel_slope": [
+        "3",
+        "3",
+        "3",
+        "3"
+    ],
+    "version": "2.2.0.4",
+    "wipe": [
+        "1",
+        "1",
+        "1",
+        "1"
+    ],
+    "wipe_distance": [
+        "2",
+        "2",
+        "2",
+        "2"
+    ],
+    "z_hop": [
+        "0.4",
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "z_hop_types": [
+        "Auto Lift",
+        "Auto Lift",
+        "Auto Lift",
+        "Auto Lift"
+    ],
+    "enable_filament_ramming": "0",
+    "extruder_clearance_height_to_rod": "27.5",
+    "extruder_clearance_radius": "72.5",
+    "machine_load_filament_time": "0",
+    "machine_unload_filament_time": "0",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME",
+    "z_hop_when_prime": [
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "ramming_pressure_advance_value": "0.02",
+    "tool_change_temprature_wait": "0",
+    "printer_notes": "1、修改幅面坐标，原点坐标\n2、修改换头时间，5S",
+    "machine_pause_gcode": "M600"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1.json b/resources/profiles/Snapmaker/machine/Snapmaker U1.json
new file mode 100644
index 00000000000..d52f6a34556
--- /dev/null
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1.json	
@@ -0,0 +1,15 @@
+{
+  "type": "machine_model",
+  "machine_tech": "FFF",
+  "family": "Snapmaker",
+  "name": "Snapmaker U1",
+  "url": "",
+  "model_id": "797581801",
+  "bed_model": "Snapmaker U1_bed.stl",
+  "bed_texture": "Snapmaker U1_texture.svg",
+  "nozzle_diameter": "0.4"
+}
+
+
+    
+    
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/machine/fdm_U1.json b/resources/profiles/Snapmaker/machine/fdm_U1.json
new file mode 100644
index 00000000000..8e2100099fa
--- /dev/null
+++ b/resources/profiles/Snapmaker/machine/fdm_U1.json
@@ -0,0 +1,189 @@
+{
+    "type": "machine",
+    "name": "fdm_U1",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_toolchanger",
+    "gcode_flavor": "klipper",
+    "single_extruder_multi_material": "0",
+    "bed_model": "Snapmaker U1_bed.stl",
+    "bed_texture": "Snapmaker U1_bed.svg",
+    "max_layer_height": [
+        "0.32",
+        "0.32",
+        "0.32",
+        "0.32",
+        "0.32"
+    ],
+    "min_layer_height": [
+        "0.08",
+        "0.08",
+        "0.08",
+        "0.08",
+        "0.08"
+    ],
+    "deretraction_speed": [
+        "30",
+        "30",
+        "30",
+        "30",
+        "30"
+    ],
+    "extruder_colour": [
+        "#FCE94F",
+        "#FCE94F",
+        "#FCE94F",
+        "#FCE94F",
+        "#FCE94F"
+    ],
+    "extruder_offset": [
+        "0x0",
+        "0x0",
+        "0x0",
+        "0x0",
+        "0x0"
+    ],
+    "long_retractions_when_cut": [
+        "0",
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "nozzle_diameter": [
+        "0.4",
+        "0.4",
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "retract_before_wipe": [
+        "70%",
+        "70%",
+        "70%",
+        "70%",
+        "70%"
+    ],
+    "retract_length_toolchange": [
+        "2",
+        "2",
+        "2",
+        "2",
+        "2"
+    ],
+    "retract_lift_above": [
+        "0",
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "retract_lift_below": [
+        "0",
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "retract_lift_enforce": [
+        "All Surfaces",
+        "All Surfaces",
+        "All Surfaces",
+        "All Surfaces",
+        "All Surfaces"
+    ],
+    "retract_restart_extra": [
+        "0",
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0",
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "retract_when_changing_layer": [
+        "1",
+        "1",
+        "1",
+        "1",
+        "1"
+    ],
+    "retraction_distances_when_cut": [
+        "18",
+        "18",
+        "18",
+        "18",
+        "18"
+    ],
+    "retraction_length": [
+        "0.8",
+        "0.8",
+        "0.8",
+        "0.8",
+        "0.8"
+    ],
+    "retraction_minimum_travel": [
+        "1",
+        "1",
+        "1",
+        "1",
+        "1"
+    ],
+    "retraction_speed": [
+        "30",
+        "30",
+        "30",
+        "30",
+        "30"
+    ],
+    "travel_slope": [
+        "3",
+        "3",
+        "3",
+        "3",
+        "3"
+    ],
+    "version": "2.1.1.1",
+    "wipe": [
+        "1",
+        "1",
+        "1",
+        "1",
+        "1"
+    ],
+    "wipe_distance": [
+        "1",
+        "1",
+        "1",
+        "1",
+        "1"
+    ],
+    "z_hop": [
+        "0.4",
+        "0.4",
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "z_hop_types": [
+        "Normal Lift",
+        "Normal Lift",
+        "Normal Lift",
+        "Normal Lift",
+        "Normal Lift"
+    ],
+    "bed_mesh_max": "267,267",
+    "bed_mesh_min": "3,3",
+    "purge_in_prime_tower": "0",
+    "machine_pause_gcode": "M601",
+    "change_filament_gcode": "",    
+    "machine_start_gcode": ";===== machine: PR2 ========================\n;===== date: 20250717 =====================\nPRINT_START\n;===== 预热热床和第一个挤出头 =================\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\n\n;===== 粗回零 =================\nG28 X Y\nT{initial_extruder}\nM109 T{initial_extruder} S140\nG28 Z\nG90\nG0 Z10 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG4 P2000\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\n\n;===== 自动进料  ======================\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\n\n;===== 挤出流量  ======================\n{if (is_extruder_used[0])}\nSM_PRINT_FLOW_CALIBRATE INDEX=0 TARGET_TEMP={nozzle_temperature[0]}\n{endif}\n{if (is_extruder_used[1])}\nSM_PRINT_FLOW_CALIBRATE INDEX=1 TARGET_TEMP={nozzle_temperature[1]}\n{endif}\n{if (is_extruder_used[2])}\nSM_PRINT_FLOW_CALIBRATE INDEX=2 TARGET_TEMP={nozzle_temperature[2]}\n{endif}\n{if (is_extruder_used[3])}\nSM_PRINT_FLOW_CALIBRATE INDEX=3 TARGET_TEMP={nozzle_temperature[3]}\n{endif}\n\n;===== 取出第一个挤出头 =================\nT{initial_extruder}\nSET_VELOCITY_LIMIT ACCEL=10000\nM204 S10000\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z10 F10000\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nG0 Z5 F10000\nFINELY_CLEAN_NOZZLE_STAGE_1\nG0 Z5 F10000\nROUGHLY_CLEAN_NOZZLE\nG0 Z5 F10000\nFINELY_CLEAN_NOZZLE_STAGE_2\nM83\n\n;===== 第一个挤出头降温 =================\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM106 S0\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nINNER_CUTOFF_BASE_DISCARD\nINNER_ROUGHLY_CLEAN_NOZZLE_BASE_DISCARD\nINNER_ROUGHLY_CLEAN_NOZZLE_BASE_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\n\n;===== 精回零 =================\nG28 Z\n;===== 热床调平 =================\n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n\n;BED_MESH_CALIBRATE PROBE_COUNT=7,7\n\n\n;======== 预挤出/划线 ================\n{if (is_extruder_used[0]) and 0 != initial_extruder}\nSM_PRINT_START_LINE INDEX=0 TARGET_TEMP={nozzle_temperature_initial_layer[0]}\nM83\nM104 S{nozzle_temperature[0] - 90}\n{endif}\n\n{if (is_extruder_used[1]) and 1 != initial_extruder}\nSM_PRINT_START_LINE INDEX=1 TARGET_TEMP={nozzle_temperature_initial_layer[1]}\nM83\nM104 S{nozzle_temperature[1] - 90}\n{endif}\n\n{if (is_extruder_used[2]) and 2 != initial_extruder}\nSM_PRINT_START_LINE INDEX=2 TARGET_TEMP={nozzle_temperature_initial_layer[2]}\nM83\nM104 S{nozzle_temperature[2] - 90}\n{endif}\n\n{if (is_extruder_used[3]) and 3 != initial_extruder}\nSM_PRINT_START_LINE INDEX=3 TARGET_TEMP={nozzle_temperature_initial_layer[3]}\nM83\nM104 S{nozzle_temperature[3] - 90}\n{endif}\n\n{if (is_extruder_used[initial_extruder])}\nSM_PRINT_START_LINE INDEX={initial_extruder} TARGET_TEMP={nozzle_temperature_initial_layer[initial_extruder]}\n{endif}\nM109 S{nozzle_temperature_initial_layer[initial_extruder]} T{initial_extruder}\nM106 S0\n\nTIMELAPSE_START",
+    "scan_first_layer": "0",
+    "nozzle_type": "hardened_steel",
+    "auxiliary_fan": "0"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/machine/fdm_klipper.json b/resources/profiles/Snapmaker/machine/fdm_klipper.json
new file mode 100644
index 00000000000..1d7ae66f6c5
--- /dev/null
+++ b/resources/profiles/Snapmaker/machine/fdm_klipper.json
@@ -0,0 +1,119 @@
+{
+    "type": "machine",
+    "name": "fdm_klipper",
+    "from": "system",
+    "instantiation": "false",
+    "printer_technology": "FFF",
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_colour": [
+        "#FCE94F"
+    ],
+    "extruder_offset": [
+        "0x0"
+    ],
+    "gcode_flavor": "marlin",
+    "silent_mode": "0",
+    "machine_max_acceleration_e": [
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "10000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1000"
+    ],
+    "machine_max_acceleration_x": [
+        "10000"
+    ],
+    "machine_max_acceleration_y": [
+        "10000"
+    ],
+    "machine_max_acceleration_z": [
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "60"
+    ],
+    "machine_max_speed_x": [
+        "500"
+    ],
+    "machine_max_speed_y": [
+        "500"
+    ],
+    "machine_max_speed_z": [
+        "10"
+    ],
+    "machine_max_jerk_e": [
+        "5"
+    ],
+    "machine_max_jerk_x": [
+        "8"
+    ],
+    "machine_max_jerk_y": [
+        "8"
+    ],
+    "machine_max_jerk_z": [
+        "0.4"
+    ],
+    "machine_min_extruding_rate": [
+        "0"
+    ],
+    "machine_min_travel_rate": [
+        "0"
+    ],
+    "max_layer_height": [
+        "0.32"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printable_height": "250",
+    "extruder_clearance_radius": "65",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_settings_id": "",
+    "printer_variant": "0.4",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "retraction_length": [
+        "5"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "z_hop": [
+        "0"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0"
+    ],
+    "retraction_speed": [
+        "60"
+    ],
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "",
+    "wipe": [
+        "1"
+    ],
+    "default_print_profile": "",
+    "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
+    "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
+    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+    "machine_pause_gcode": "M601"
+}
diff --git a/resources/profiles/Snapmaker/machine/fdm_toolchanger.json b/resources/profiles/Snapmaker/machine/fdm_toolchanger.json
new file mode 100644
index 00000000000..d91f4bb610d
--- /dev/null
+++ b/resources/profiles/Snapmaker/machine/fdm_toolchanger.json
@@ -0,0 +1,63 @@
+{
+    "type": "machine",
+    "name": "fdm_toolchanger",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_klipper",
+    "gcode_flavor": "klipper",
+    "machine_max_acceleration_e": ["5000", "5000"],
+    "machine_max_acceleration_extruding": ["20000", "20000"],
+    "machine_max_acceleration_retracting": ["5000", "5000"],
+    "machine_max_acceleration_travel": ["20000", "20000"],
+    "machine_max_acceleration_x": ["20000", "20000"],
+    "machine_max_acceleration_y": ["20000", "20000"],
+    "machine_max_acceleration_z": ["500", "200"],
+    "machine_max_speed_e": ["25", "25"],
+    "machine_max_speed_x": ["500", "200"],
+    "machine_max_speed_y": ["500", "200"],
+    "machine_max_speed_z": ["12", "12"],
+    "machine_max_jerk_e": ["2.5", "2.5"],
+    "machine_max_jerk_x": ["9", "9"],
+    "machine_max_jerk_y": ["9", "9"],
+    "machine_max_jerk_z": ["0.2", "0.4"],
+    "machine_min_extruding_rate": ["0", "0"],
+    "machine_min_travel_rate": ["0", "0"],
+    "max_layer_height": ["0.32"],
+    "min_layer_height": ["0.08"],
+    "printable_height": "250",
+    "extruder_clearance_radius": "65",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "printer_settings_id": "",
+    "printer_technology": "FFF",
+    "printer_variant": "0.4",
+    "retraction_minimum_travel": ["1"],
+    "retract_before_wipe": ["70%"],
+    "retract_when_changing_layer": ["1"],
+    "retraction_length": ["0.8"],
+    "retract_length_toolchange": ["2"],
+    "z_hop": ["0.4"],
+    "retract_restart_extra": ["0"],
+    "retract_restart_extra_toolchange": ["0"],
+    "retraction_speed": ["30"],
+    "deretraction_speed": ["30"],
+    "z_hop_types": "Normal Lift",
+    "silent_mode": "0",
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "",
+    "wipe": ["1"],
+    "default_filament_profile": [
+        "Snapmaker PLA"
+    ],
+    "default_print_profile": "0.20mm Standard @Snapmaker",
+    "bed_exclude_area": ["0x0"],
+    "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n",
+    "machine_end_gcode": "PRINT_END",
+    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+    "machine_pause_gcode": "PAUSE",
+    "scan_first_layer": "0",
+    "nozzle_type": "undefine",
+    "auxiliary_fan": "0"
+  }
+  
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json
new file mode 100644
index 00000000000..e259e354a6d
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json	
@@ -0,0 +1,20 @@
+{
+    "type": "process",
+    "name": "0.08 Extra Fine @Snapmaker U1 (0.4 nozzle)",
+    "inherits": "fdm_process_U1_0.08",
+    "from": "system",
+    "setting_id": "GP001",
+    "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
+    "smooth_coefficient": "150",
+    "overhang_totally_speed": "50",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "ooze_prevention": "1",
+    "prime_tower_width": "50",
+    "prime_volume": "38",
+    "slowdown_for_curled_perimeters": "0",
+    "standby_temperature_delta": "-150",
+    "wipe_tower_filament": "1"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json
new file mode 100644
index 00000000000..a2b5bd862b3
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json	
@@ -0,0 +1,29 @@
+{
+    "type": "process",
+    "name": "0.08 High Quality @Snapmaker U1 (0.4 nozzle)",
+    "inherits": "fdm_process_U1_0.08",
+    "from": "system",
+    "setting_id": "GP099",
+    "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
+    "default_acceleration": "4000",
+    "gap_infill_speed": "210",
+    "inner_wall_speed": "120",
+    "internal_solid_infill_speed": "150",
+    "outer_wall_acceleration": "2000",
+    "outer_wall_speed": "60",
+    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_speed": "150",
+    "top_surface_speed": "150",
+    "smooth_coefficient": "150",
+    "overhang_totally_speed": "50",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "ooze_prevention": "1",
+    "prime_tower_width": "50",
+    "prime_volume": "38",
+    "slowdown_for_curled_perimeters": "0",
+    "standby_temperature_delta": "-150",
+    "wipe_tower_filament": "1"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json
new file mode 100644
index 00000000000..281ef4f5b52
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json	
@@ -0,0 +1,18 @@
+{
+    "type": "process",
+    "name": "0.12 Fine @Snapmaker U1 (0.4 nozzle)",
+    "inherits": "fdm_process_U1_0.12",
+    "from": "system",
+    "setting_id": "GP002",
+    "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
+    "smooth_coefficient": "150",
+    "overhang_totally_speed": "50",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "ooze_prevention": "1",
+    "slowdown_for_curled_perimeters": "0",
+    "standby_temperature_delta": "-150",
+    "wipe_tower_filament": "1"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json
new file mode 100644
index 00000000000..a89e55ff349
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json	
@@ -0,0 +1,27 @@
+{
+    "type": "process",
+    "name": "0.12 High Quality @Snapmaker U1 (0.4 nozzle)",
+    "inherits": "fdm_process_U1_0.12",
+    "from": "system",
+    "setting_id": "GP103",
+    "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
+    "default_acceleration": "4000",
+    "gap_infill_speed": "230",
+    "inner_wall_speed": "150",
+    "internal_solid_infill_speed": "180",
+    "outer_wall_acceleration": "2000",
+    "outer_wall_speed": "60",
+    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_speed": "180",
+    "top_surface_speed": "150",
+    "smooth_coefficient": "150",
+    "overhang_totally_speed": "50",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "prime_tower_width": "50",
+    "prime_volume": "38",
+    "slowdown_for_curled_perimeters": "0",
+    "wipe_tower_filament": "1"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json
new file mode 100644
index 00000000000..8f31defad74
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json	
@@ -0,0 +1,29 @@
+{
+    "type": "process",
+    "name": "0.16 High Quality @Snapmaker U1 (0.4 nozzle)",
+    "inherits": "fdm_process_U1_0.16",
+    "from": "system",
+    "setting_id": "GP107",
+    "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
+    "default_acceleration": "4000",
+    "gap_infill_speed": "250",
+    "inner_wall_speed": "150",
+    "internal_solid_infill_speed": "200",
+    "outer_wall_acceleration": "2000",
+    "outer_wall_speed": "60",
+    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_speed": "200",
+    "top_surface_speed": "150",
+    "smooth_coefficient": "150",
+    "overhang_totally_speed": "50",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "ooze_prevention": "1",
+    "prime_tower_width": "50",
+    "prime_volume": "35",
+    "slowdown_for_curled_perimeters": "0",
+    "standby_temperature_delta": "-150",
+    "wipe_tower_filament": "1"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json
new file mode 100644
index 00000000000..b6ceeabb8c7
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json	
@@ -0,0 +1,20 @@
+{
+    "type": "process",
+    "name": "0.16 Optimal @Snapmaker U1 (0.4 nozzle)",
+    "inherits": "fdm_process_U1_0.16",
+    "from": "system",
+    "setting_id": "GP003",
+    "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
+    "smooth_coefficient": "150",
+    "overhang_totally_speed": "50",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "ooze_prevention": "1",
+    "prime_tower_width": "50",
+    "prime_volume": "38",
+    "slowdown_for_curled_perimeters": "0",
+    "standby_temperature_delta": "-150",
+    "wipe_tower_filament": "1"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle).json
new file mode 100644
index 00000000000..44f5f7940b9
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle).json	
@@ -0,0 +1,26 @@
+{
+    "type": "process",
+    "setting_id": "GP008",
+    "name": "0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle)",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_U1_0.20",
+    "enable_support": "1",
+    "support_interface_top_layers": "3",
+    "support_top_z_distance": "0.2",
+    "support_interface_loop_pattern": "1",
+    "support_interface_spacing": "0",
+    "support_interface_speed": "80",
+    "support_filament": "0",
+    "support_interface_filament": "0",
+    "enable_prime_tower": "1",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "ooze_prevention": "1",
+    "prime_tower_width": "50",
+    "prime_volume": "38",
+    "slowdown_for_curled_perimeters": "0",
+    "standby_temperature_delta": "-150",
+    "wipe_tower_filament": "1"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json
new file mode 100644
index 00000000000..e06921ec108
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json	
@@ -0,0 +1,24 @@
+{
+    "type": "process",
+    "name": "0.20 Quality @Snapmaker U1 (0.4 nozzle)",
+    "inherits": "fdm_process_U1_0.20",
+    "from": "system",
+    "setting_id": "GP004",
+    "instantiation": "true",
+    "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
+    "smooth_coefficient": "150",
+    "overhang_totally_speed": "50",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "ooze_prevention": "1",
+    "prime_tower_width": "40",
+    "prime_volume": "35",
+    "slowdown_for_curled_perimeters": "0",
+    "standby_temperature_delta": "-150",
+    "wipe_tower_filament": "0",
+    "preheat_time": "30",
+    "wipe_tower_cone_angle": "15",
+    "prime_tower_brim_width": "5",
+    "initial_layer_print_height": "0.25"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json
new file mode 100644
index 00000000000..ba4a1de7173
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json	
@@ -0,0 +1,24 @@
+{
+    "type": "process",
+    "name": "0.20 Standard @Snapmaker U1 (0.4 nozzle)",
+    "inherits": "fdm_process_U1_0.20",
+    "from": "system",
+    "setting_id": "GP004",
+    "instantiation": "true",
+    "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
+    "smooth_coefficient": "150",
+    "overhang_totally_speed": "50",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "ooze_prevention": "1",
+    "prime_tower_width": "40",
+    "prime_volume": "15",
+    "slowdown_for_curled_perimeters": "0",
+    "standby_temperature_delta": "-150",
+    "wipe_tower_filament": "0",
+    "preheat_time": "30",
+    "wipe_tower_cone_angle": "15",
+    "prime_tower_brim_width": "5",
+    "initial_layer_print_height": "0.25"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json
new file mode 100644
index 00000000000..a5e91cae4df
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json	
@@ -0,0 +1,23 @@
+{
+    "type": "process",
+    "name": "0.20 Strength @Snapmaker U1 (0.4 nozzle)",
+    "inherits": "fdm_process_U1_0.20",
+    "from": "system",
+    "setting_id": "GP013",
+    "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
+    "outer_wall_speed": "60",
+    "sparse_infill_density": "25%",
+    "smooth_coefficient": "150",
+    "overhang_totally_speed": "50",
+    "wall_loops": "6",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "ooze_prevention": "1",
+    "prime_tower_width": "50",
+    "prime_volume": "38",
+    "slowdown_for_curled_perimeters": "0",
+    "standby_temperature_delta": "-150",
+    "wipe_tower_filament": "1"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json
new file mode 100644
index 00000000000..2b1c67e05f0
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json	
@@ -0,0 +1,27 @@
+{
+    "type": "process",
+    "name": "0.20 Support @Snapmaker U1 (0.4 nozzle)",
+    "inherits": "fdm_process_U1_0.20",
+    "from": "system",
+    "setting_id": "GP0040",
+    "instantiation": "true",
+    "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
+    "smooth_coefficient": "150",
+    "overhang_totally_speed": "50",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "ooze_prevention": "1",
+    "prime_tower_width": "40",
+    "prime_volume": "15",
+    "slowdown_for_curled_perimeters": "0",
+    "standby_temperature_delta": "-150",
+    "wipe_tower_filament": "0",
+    "preheat_time": "30",
+    "wipe_tower_cone_angle": "15",
+    "prime_tower_brim_width": "5",
+    "enable_support": "1",
+    "initial_layer_print_height": "0.25",
+    "support_interface_spacing": "0",
+    "support_interface_top_layers": "3"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json
new file mode 100644
index 00000000000..6f8fab0d276
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json	
@@ -0,0 +1,26 @@
+{
+    "type": "process",
+    "setting_id": "GP008",
+    "name": "0.20 Support W @Snapmaker U1 (0.4 nozzle)",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_U1_0.20",
+    "enable_support": "1",
+    "support_interface_top_layers": "3",
+    "support_top_z_distance": "0.2",
+    "support_interface_loop_pattern": "1",
+    "support_interface_spacing": "0",
+    "support_interface_speed": "80",
+    "support_filament": "0",
+    "support_interface_filament": "0",
+    "enable_prime_tower": "1",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "ooze_prevention": "1",
+    "prime_tower_width": "50",
+    "prime_volume": "38",
+    "slowdown_for_curled_perimeters": "0",
+    "standby_temperature_delta": "-150",
+    "wipe_tower_filament": "1"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json
new file mode 100644
index 00000000000..989367d0a88
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json	
@@ -0,0 +1,20 @@
+{
+    "type": "process",
+    "name": "0.24 Draft @Snapmaker U1 (0.4 nozzle)",
+    "inherits": "fdm_process_U1_0.24",
+    "from": "system",
+    "setting_id": "GP005",
+    "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
+    "smooth_coefficient": "150",
+    "overhang_totally_speed": "50",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "ooze_prevention": "1",
+    "prime_tower_width": "50",
+    "prime_volume": "38",
+    "slowdown_for_curled_perimeters": "0",
+    "standby_temperature_delta": "-150",
+    "wipe_tower_filament": "1"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json
new file mode 100644
index 00000000000..9d0aec1feb0
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json	
@@ -0,0 +1,60 @@
+{
+  "type": "process",
+  "from": "system",
+  "instantiation": "true",
+  "name": "0.25 Benchy @Snapmaker U1 (0.4 nozzle)",
+  "setting_id": "2853588009",
+  "inherits": "fdm_process_U1",
+  "compatible_printers": [
+    "Snapmaker U1 (0.4 nozzle)"
+  ],
+  "elefant_foot_compensation": "0.15",
+  "top_shell_layers": "3",
+  "top_shell_thickness": "0.5",
+  "initial_layer_speed": "100",
+  "initial_layer_infill_speed": "180",
+  "outer_wall_speed": "180",
+  "inner_wall_speed": "200",
+  "sparse_infill_speed": "200",
+  "internal_solid_infill_speed": "200",
+  "top_surface_speed": "180",
+  "gap_infill_speed": "200",
+  "ironing_speed": "30",
+  "enable_overhang_speed": "0",
+  "overhang_1_4_speed": "180",
+  "overhang_2_4_speed": "20",
+  "overhang_3_4_speed": "10",
+  "layer_height": "0.25",
+  "initial_layer_print_height": "0.25",
+  "detect_overhang_wall": "0",
+  "reduce_crossing_wall": "0",
+  "ensure_vertical_shell_thickness": "none",
+  "filename_format": "testBenchy_{print_time}.gcode",
+  "sparse_infill_density": "10%",
+  "sparse_infill_pattern": "alignedrectilinear",
+  "wall_generator": "classic",
+  "seam_position": "nearest",
+  "wall_loops": "2",
+  "minimum_sparse_infill_area": "0",
+  "infill_combination": "1",
+  "infill_direction": "90",
+  "gap_fill_target": "nowhere",
+  "line_width": "0.4",
+  "inner_wall_line_width": "0.5",
+  "internal_solid_infill_line_width": "0.5",
+  "outer_wall_line_width": "0.5",
+  "sparse_infill_line_width": "0.5",
+  "top_surface_line_width": "0.5",
+  "bottom_shell_layers": "2",
+  "initial_layer_travel_speed": "100%",
+  "bridge_acceleration": "3000",
+  "bridge_speed": "100",
+  "default_acceleration": "3000",
+  "inner_wall_acceleration": "3000",
+  "internal_solid_infill_acceleration": "3000",
+  "outer_wall_acceleration": "1600",
+  "small_perimeter_speed": "200",
+  "sparse_infill_acceleration": "3000",
+  "top_surface_acceleration": "3000",
+  "initial_layer_acceleration": "1600"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json
new file mode 100644
index 00000000000..23028ae7125
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json	
@@ -0,0 +1,18 @@
+{
+    "type": "process",
+    "name": "0.28 Extra Draft @Snapmaker U1 (0.4 nozzle)",
+    "inherits": "fdm_process_U1_0.28",
+    "from": "system",
+    "setting_id": "GP006",
+    "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
+    "smooth_coefficient": "150",
+    "overhang_totally_speed": "50",
+    "compatible_printers": [
+        "Snapmaker U1 (0.4 nozzle)"
+    ],
+    "prime_tower_width": "50",
+    "prime_volume": "38",
+    "slowdown_for_curled_perimeters": "0",
+    "wipe_tower_filament": "1"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1.json b/resources/profiles/Snapmaker/process/fdm_process_U1.json
new file mode 100644
index 00000000000..6c9935cce7b
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/fdm_process_U1.json
@@ -0,0 +1,73 @@
+{
+    "type": "process",
+    "name": "fdm_process_U1",
+    "from": "system",
+    "instantiation": "false",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "bridge_flow": "0.95",
+    "bridge_speed": "25",
+    "brim_width": "5",
+    "print_sequence": "by layer",
+    "default_acceleration": "10000",
+    "bridge_no_support": "0",
+    "elefant_foot_compensation": "0.1",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "120",
+    "line_width": "0.45",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "grid",
+    "initial_layer_line_width": "0.42",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "20",
+    "gap_infill_speed": "30",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "15%",
+    "sparse_infill_speed": "50",
+    "interface_shells": "0",
+    "detect_overhang_wall": "0",
+    "reduce_infill_retraction": "0",
+    "filename_format": "{input_filename_base}.gcode",
+    "wall_loops": "2",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "40",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "nearest",
+    "skirt_distance": "2",
+    "skirt_height": "2",
+    "minimum_sparse_infill_area": "0",
+    "internal_solid_infill_line_width": "0.45",
+    "internal_solid_infill_speed": "40",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "support_filament": "0",
+    "support_line_width": "0.42",
+    "support_interface_filament": "0",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.15",
+    "support_interface_loop_pattern": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_spacing": "0",
+    "support_interface_speed": "80",
+    "support_interface_pattern": "auto",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2",
+    "support_speed": "40",
+    "support_threshold_angle": "40",
+    "support_object_xy_distance": "0.5",
+    "detect_thin_wall": "0",
+    "top_surface_line_width": "0.42",
+    "top_surface_speed": "30",
+    "travel_speed": "400",
+    "enable_prime_tower": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "compatible_printers": [],
+    "smooth_coefficient": "80",
+    "overhang_totally_speed": "24"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.08.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.08.json
new file mode 100644
index 00000000000..0f89ef94155
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.08.json
@@ -0,0 +1,26 @@
+{
+    "type": "process",
+    "name": "fdm_process_U1_0.08",
+    "inherits": "fdm_process_U1_common",
+    "from": "system",
+    "instantiation": "false",
+    "layer_height": "0.08",
+    "elefant_foot_compensation": "0.15",
+    "bottom_shell_layers": "7",
+    "top_shell_layers": "9",
+    "bridge_flow": "1",
+    "ironing_flow": "8%",
+    "initial_layer_speed": "50",
+    "initial_layer_infill_speed": "105",
+    "outer_wall_speed": "200",
+    "inner_wall_speed": "350",
+    "sparse_infill_speed": "450",
+    "internal_solid_infill_speed": "350",
+    "gap_infill_speed": "350",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "support_threshold_angle": "15",
+    "support_top_z_distance": "0.08",
+    "support_bottom_z_distance": "0.08"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.12.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.12.json
new file mode 100644
index 00000000000..658db214e44
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.12.json
@@ -0,0 +1,26 @@
+{
+    "type": "process",
+    "name": "fdm_process_U1_0.12",
+    "inherits": "fdm_process_U1_common",
+    "from": "system",
+    "instantiation": "false",
+    "layer_height": "0.12",
+    "bottom_shell_layers": "5",
+    "elefant_foot_compensation": "0.15",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.6",
+    "bridge_flow": "1",
+    "initial_layer_speed": "50",
+    "initial_layer_infill_speed": "105",
+    "outer_wall_speed": "200",
+    "inner_wall_speed": "350",
+    "sparse_infill_speed": "430",
+    "internal_solid_infill_speed": "350",
+    "gap_infill_speed": "350",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "support_threshold_angle": "20",
+    "support_top_z_distance": "0.12",
+    "support_bottom_z_distance": "0.12"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.16.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.16.json
new file mode 100644
index 00000000000..21358ae54ed
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.16.json
@@ -0,0 +1,26 @@
+{
+    "type": "process",
+    "name": "fdm_process_U1_0.16",
+    "inherits": "fdm_process_U1_common",
+    "from": "system",
+    "instantiation": "false",
+    "layer_height": "0.16",
+    "elefant_foot_compensation": "0.15",
+    "bottom_shell_layers": "4",
+    "top_shell_layers": "6",
+    "top_shell_thickness": "1.0",
+    "bridge_flow": "1",
+    "initial_layer_speed": "50",
+    "initial_layer_infill_speed": "105",
+    "outer_wall_speed": "200",
+    "inner_wall_speed": "300",
+    "sparse_infill_speed": "330",
+    "internal_solid_infill_speed": "300",
+    "gap_infill_speed": "300",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "support_threshold_angle": "25",
+    "support_top_z_distance": "0.16",
+    "support_bottom_z_distance": "0.16"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.20.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.20.json
new file mode 100644
index 00000000000..092e48ba27d
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.20.json
@@ -0,0 +1,18 @@
+{
+    "type": "process",
+    "name": "fdm_process_U1_0.20",
+    "inherits": "fdm_process_U1_common",
+    "from": "system",
+    "instantiation": "false",
+    "elefant_foot_compensation": "0.15",
+    "top_shell_thickness": "1.0",
+    "bridge_flow": "1",
+    "initial_layer_speed": "50",
+    "initial_layer_infill_speed": "105",
+    "outer_wall_speed": "200",
+    "inner_wall_speed": "300",
+    "sparse_infill_speed": "270",
+    "internal_solid_infill_speed": "250",
+    "gap_infill_speed": "250",
+    "top_shell_layers": "5"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.24.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.24.json
new file mode 100644
index 00000000000..89224e3a29a
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.24.json
@@ -0,0 +1,21 @@
+{
+    "type": "process",
+    "name": "fdm_process_U1_0.24",
+    "inherits": "fdm_process_U1_common",
+    "from": "system",
+    "instantiation": "false",
+    "layer_height": "0.24",
+    "elefant_foot_compensation": "0.15",
+    "top_surface_line_width": "0.45",
+    "top_shell_thickness": "1.0",
+    "bridge_flow": "1",
+    "initial_layer_speed": "50",
+    "initial_layer_infill_speed": "105",
+    "outer_wall_speed": "200",
+    "inner_wall_speed": "230",
+    "sparse_infill_speed": "230",
+    "internal_solid_infill_speed": "230",
+    "gap_infill_speed": "230",
+    "support_threshold_angle": "35",
+    "top_shell_layers": "4"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.28.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.28.json
new file mode 100644
index 00000000000..189d8d337ce
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.28.json
@@ -0,0 +1,21 @@
+{
+    "type": "process",
+    "name": "fdm_process_U1_0.28",
+    "inherits": "fdm_process_U1_common",
+    "from": "system",
+    "instantiation": "false",
+    "layer_height": "0.28",
+    "elefant_foot_compensation": "0.15",
+    "top_surface_line_width": "0.45",
+    "top_shell_thickness": "1.0",
+    "bridge_flow": "1",
+    "initial_layer_speed": "50",
+    "initial_layer_infill_speed": "105",
+    "outer_wall_speed": "200",
+    "inner_wall_speed": "200",
+    "sparse_infill_speed": "200",
+    "internal_solid_infill_speed": "200",
+    "gap_infill_speed": "200",
+    "support_threshold_angle": "40",
+    "top_shell_layers": "4"
+}
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_common.json b/resources/profiles/Snapmaker/process/fdm_process_U1_common.json
new file mode 100644
index 00000000000..4f9c8a34079
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/fdm_process_U1_common.json
@@ -0,0 +1,73 @@
+{
+    "type": "process",
+    "name": "fdm_process_U1_common",
+    "inherits": "fdm_process_U1",
+    "from": "system",
+    "instantiation": "false",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bridge_speed": "50",
+    "brim_object_gap": "0.1",
+    "compatible_printers_condition": "",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "1",
+    "outer_wall_acceleration": "5000",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "line_width": "0.42",
+    "internal_bridge_support_thickness": "0.8",
+    "initial_layer_acceleration": "500",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_speed": "30",
+    "gap_infill_speed": "50",
+    "sparse_infill_speed": "250",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "layer_height": "0.2",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "only_one_wall_top": "1",
+    "inner_wall_speed": "150",
+    "seam_position": "aligned",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "150",
+    "initial_layer_infill_speed": "60",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_style": "default",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_expansion": "0",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_angle": "45",
+    "tree_support_wall_count": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_acceleration": "2000",
+    "top_surface_speed": "200",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.8",
+    "travel_speed": "500",
+    "enable_prime_tower": "1",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "35",
+    "wall_generator": "classic",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/scripts/orca_filament_lib.py b/scripts/orca_filament_lib.py
index 984b81e9516..f4838cddea4 100644
--- a/scripts/orca_filament_lib.py
+++ b/scripts/orca_filament_lib.py
@@ -49,16 +49,16 @@ def topological_sort(filaments):
 
     return result
 
-def update_filament_library(vendor="OrcaFilamentLibrary"):
+def update_profile_library(vendor="OrcaFilamentLibrary",profile_type="filament"):
     # change current working directory to the relative path(..\resources\profiles) compare to script location
     os.chdir(os.path.join(os.path.dirname(__file__), '..', 'resources', 'profiles'))
 
-    # Collect current filament entries
-    current_filaments = []
+    # Collect current profile entries
+    current_profiles = []
     base_dir = vendor
-    filament_dir = os.path.join(base_dir, 'filament')
+    profile_dir = os.path.join(base_dir, profile_type)
     
-    for root, dirs, files in os.walk(filament_dir):
+    for root, dirs, files in os.walk(profile_dir):
         for file in files:
             if file.lower().endswith('.json'):
                 full_path = os.path.join(root, file)
@@ -79,32 +79,34 @@ def update_filament_library(vendor="OrcaFilamentLibrary"):
                             }
                             if inherits:
                                 entry['inherits'] = inherits
-                            current_filaments.append(entry)
+                            current_profiles.append(entry)
                         else:
                             print(f"Warning: Missing 'name' in {full_path}")
                 except Exception as e:
                     print(f"Error reading {full_path}: {str(e)}")
                     continue
 
-    # Sort filaments based on inheritance
-    sorted_filaments = topological_sort(current_filaments)
+    # Sort profiles based on inheritance
+    sorted_profiles = topological_sort(current_profiles)
     
     # Remove the inherits field as it's not needed in the final JSON
-    for filament in sorted_filaments:
-        filament.pop('inherits', None)
+    for p in sorted_profiles:
+        p.pop('inherits', None)
 
     # Update library file
     lib_path = f'{vendor}.json'
+
+    profile_section = profile_type+'_list'
     
     try:
         with open(lib_path, 'r+', encoding='utf-8') as f:
             library = json.load(f)
-            library['filament_list'] = sorted_filaments
+            library[profile_section] = sorted_profiles
             f.seek(0)
             json.dump(library, f, indent=4, ensure_ascii=False)
             f.truncate()
             
-        print(f"Filament library for {vendor} updated successfully!")
+        print(f"Profile library for {vendor} updated successfully!")
     except Exception as e:
         print(f"Error updating library file: {str(e)}")
 
@@ -161,6 +163,7 @@ if __name__ == '__main__':
     args = parser.parse_args()
     
     if args.mode == 'update':
-        update_filament_library(args.vendor)
+        update_profile_library(args.vendor, 'filament')
+        update_profile_library(args.vendor, 'process')
     else:
         rename_filament_system(args.vendor)
\ No newline at end of file