Add more Polymaker filament presets (#13858)

* add new presets

* fix inhernce

* fix rename

* update

* apply fix

* update index

resources/profiles/Flashforge/process/0.18mm Standard @FF C5 0.6 nozzle.json

@@ -1,4 +1,9 @@
 {
+	"type": "process",
+	"name": "0.18mm Standard @FF C5 0.6 nozzle",
+	"inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
+	"from": "system",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Flashforge Creator 5 0.6 nozzle",
 		"Flashforge Creator 5 Pro 0.6 nozzle"
@@ -8,11 +13,9 @@
 	"enable_prime_tower": "1",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"filter_out_gap_fill": "0.1",
-	"from": "system",
 	"gap_fill_target": "topbottom",
 	"gap_infill_speed": "150",
 	"infill_wall_overlap": "15%",
-	"inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
 	"initial_layer_infill_speed": "55",
 	"initial_layer_line_width": "0.62",
 	"initial_layer_print_height": "0.3",
@@ -20,15 +23,12 @@
 	"inner_wall_acceleration": "10000",
 	"inner_wall_line_width": "0.62",
 	"inner_wall_speed": "150",
-	"instantiation": "true",
 	"internal_solid_infill_line_width": "0.62",
 	"internal_solid_infill_pattern": "rectilinear",
 	"internal_solid_infill_speed": "150",
-	"is_custom_defined": "0",
 	"layer_height": "0.18",
 	"line_width": "0.62",
 	"max_travel_detour_distance": "300",
-	"name": "0.18mm Standard @FF C5 0.6 nozzle",
 	"only_one_wall_top": "1",
 	"ooze_prevention": "1",
 	"outer_wall_line_width": "0.62",
@@ -55,7 +55,6 @@
 	"top_shell_layers": "3",
 	"top_surface_line_width": "0.62",
 	"top_surface_speed": "150",
-	"version": "2.1.1.0",
 	"wipe_tower_cone_angle": "12",
 	"wipe_tower_extra_rib_length": "10",
 	"wipe_tower_extra_spacing": "120%",