From f70e504e399262b05ce92891e80883086af366d1 Mon Sep 17 00:00:00 2001 From: SoftFever Date: Mon, 8 Apr 2024 22:13:27 +0800 Subject: [PATCH] update WIKI --- doc/Calibration.md | 2 +- doc/adaptive-bed-mesh.md | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/doc/Calibration.md b/doc/Calibration.md index 9a5975ce290..bb4b8422b85 100644 --- a/doc/Calibration.md +++ b/doc/Calibration.md @@ -79,7 +79,7 @@ The PA value for this test will be increased by 0.002 for every 1 mm increase in Steps: 1. Select the printer, filament, and process you would like to use for the test. 2. Examine each corner of the print and mark the height that yields the best overall result. - 3. I selected a height of 8 mm for this case, so the pressure advance value should be calculated as `0.002x8 = 0.016`. + 3. I selected a height of 8 mm for this case, so the pressure advance value should be calculated as `PressureAdvanceStart+(PressureAdvanceStep x measured)` example: `0+(0.002 x 8) = 0.016`. ![tower](https://user-images.githubusercontent.com/103989404/210140231-e886b98d-280a-4464-9781-c74ed9b7d44e.jpg) ![tower_measure](https://user-images.githubusercontent.com/103989404/210140232-885b549b-e3b8-46b9-a24c-5229c9182408.jpg) diff --git a/doc/adaptive-bed-mesh.md b/doc/adaptive-bed-mesh.md index 01e346b1351..a711eaff0c5 100644 --- a/doc/adaptive-bed-mesh.md +++ b/doc/adaptive-bed-mesh.md @@ -34,7 +34,8 @@ G29 L{adaptive_bed_mesh_min[0]} R{adaptive_bed_mesh_max[0]} F{adaptive_bed_mesh_ ### Klipper: ``` ; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally -BED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=1 ADAPTIVE_MARGIN=0 +; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic +BED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 ``` ### RRF: ```