diff --git a/resources/profiles/Prusa.json b/resources/profiles/Prusa.json
index 4cda8b1ef4b..3b6ee65c0fd 100644
--- a/resources/profiles/Prusa.json
+++ b/resources/profiles/Prusa.json
@@ -21,8 +21,8 @@
             "sub_path": "machine/Prusa MINI.json"
         },
         {
-            "name": "Pursa XL Input Shaper",
-            "sub_path": "machine/Prusa XLIS.json"
+            "name": "Prusa XL",
+            "sub_path": "machine/Prusa XL.json"
         }
     ],
     "process_list": [
@@ -263,132 +263,132 @@
             "sub_path": "process/0.56mm Standard @MK4.json"
         },
         {
-            "name": "0.15mm Structural @XLIS 0.25",
-            "sub_path": "process/0.15mm Structural @XLIS 0.25.json"
+            "name": "0.15mm Structural @Prusa XL 0.25",
+            "sub_path": "process/0.15mm Structural @Prusa XL 0.25.json"
         },
         {
-            "name": "0.15mm Speed @XLIS 0.25",
-            "sub_path": "process/0.15mm Speed @XLIS 0.25.json"
+            "name": "0.15mm Speed @Prusa XL 0.25",
+            "sub_path": "process/0.15mm Speed @Prusa XL 0.25.json"
         },
         {
-            "name": "0.12mm Structural @XLIS 0.25",
-            "sub_path": "process/0.12mm Structural @XLIS 0.25.json"
+            "name": "0.12mm Structural @Prusa XL 0.25",
+            "sub_path": "process/0.12mm Structural @Prusa XL 0.25.json"
         },
         {
-            "name": "0.12mm Speed @XLIS 0.25",
-            "sub_path": "process/0.12mm Speed @XLIS 0.25.json"
+            "name": "0.12mm Speed @Prusa XL 0.25",
+            "sub_path": "process/0.12mm Speed @Prusa XL 0.25.json"
         },
         {
-            "name": "0.07mm Detail @XLIS 0.25",
-            "sub_path": "process/0.07mm Detail @XLIS 0.25.json"
+            "name": "0.07mm Detail @Prusa XL 0.25",
+            "sub_path": "process/0.07mm Detail @Prusa XL 0.25.json"
         },
         {
-            "name": "0.05mm Detail @XLIS 0.25",
-            "sub_path": "process/0.05mm Detail @XLIS 0.25.json"
+            "name": "0.05mm Detail @Prusa XL 0.25",
+            "sub_path": "process/0.05mm Detail @Prusa XL 0.25.json"
         },
         {
-            "name": "0.20mm Speed @XLIS 0.3",
-            "sub_path": "process/0.20mm Speed @XLIS 0.3.json"
+            "name": "0.20mm Speed @Prusa XL 0.3",
+            "sub_path": "process/0.20mm Speed @Prusa XL 0.3.json"
         },
         {
-            "name": "0.16mm Structural @XLIS 0.3",
-            "sub_path": "process/0.16mm Structural @XLIS 0.3.json"
+            "name": "0.16mm Structural @Prusa XL 0.3",
+            "sub_path": "process/0.16mm Structural @Prusa XL 0.3.json"
         },
         {
-            "name": "0.16mm Speed @XLIS 0.3",
-            "sub_path": "process/0.16mm Speed @XLIS 0.3.json"
+            "name": "0.16mm Speed @Prusa XL 0.3",
+            "sub_path": "process/0.16mm Speed @Prusa XL 0.3.json"
         },
         {
-            "name": "0.12mm Structural @XLIS 0.3",
-            "sub_path": "process/0.12mm Structural @XLIS 0.3.json"
+            "name": "0.12mm Structural @Prusa XL 0.3",
+            "sub_path": "process/0.12mm Structural @Prusa XL 0.3.json"
         },
         {
-            "name": "0.25mm Structural @XLIS 0.4",
-            "sub_path": "process/0.25mm Structural @XLIS 0.4.json"
+            "name": "0.25mm Structural @Prusa XL 0.4",
+            "sub_path": "process/0.25mm Structural @Prusa XL 0.4.json"
         },
         {
-            "name": "0.20mm Structural @XLIS 0.4",
-            "sub_path": "process/0.20mm Structural @XLIS 0.4.json"
+            "name": "0.20mm Structural @Prusa XL 0.4",
+            "sub_path": "process/0.20mm Structural @Prusa XL 0.4.json"
         },
         {
-            "name": "0.20mm Speed @XLIS 0.4",
-            "sub_path": "process/0.20mm Speed @XLIS 0.4.json"
+            "name": "0.20mm Speed @Prusa XL 0.4",
+            "sub_path": "process/0.20mm Speed @Prusa XL 0.4.json"
         },
         {
-            "name": "0.15mm Structural @XLIS 0.4",
-            "sub_path": "process/0.15mm Structural @XLIS 0.4.json"
+            "name": "0.15mm Structural @Prusa XL 0.4",
+            "sub_path": "process/0.15mm Structural @Prusa XL 0.4.json"
         },
         {
-            "name": "0.15mm Speed @XLIS 0.4",
-            "sub_path": "process/0.15mm Speed @XLIS 0.4.json"
+            "name": "0.15mm Speed @Prusa XL 0.4",
+            "sub_path": "process/0.15mm Speed @Prusa XL 0.4.json"
         },
         {
-            "name": "0.10mm FastDetail @XLIS 0.4",
-            "sub_path": "process/0.10mm FastDetail @XLIS 0.4.json"
+            "name": "0.10mm FastDetail @Prusa XL 0.4",
+            "sub_path": "process/0.10mm FastDetail @Prusa XL 0.4.json"
         },
         {
-            "name": "0.25mm Structural @XLIS 0.5",
-            "sub_path": "process/0.25mm Structural @XLIS 0.5.json"
+            "name": "0.25mm Structural @Prusa XL 0.5",
+            "sub_path": "process/0.25mm Structural @Prusa XL 0.5.json"
         },
         {
-            "name": "0.25mm Speed @XLIS 0.5",
-            "sub_path": "process/0.25mm Speed @XLIS 0.5.json"
+            "name": "0.25mm Speed @Prusa XL 0.5",
+            "sub_path": "process/0.25mm Speed @Prusa XL 0.5.json"
         },
         {
-            "name": "0.20mm Structural @XLIS 0.5",
-            "sub_path": "process/0.20mm Structural @XLIS 0.5.json"
+            "name": "0.20mm Structural @Prusa XL 0.5",
+            "sub_path": "process/0.20mm Structural @Prusa XL 0.5.json"
         },
         {
-            "name": "0.20mm Speed @XLIS 0.5",
-            "sub_path": "process/0.20mm Speed @XLIS 0.5.json"
+            "name": "0.20mm Speed @Prusa XL 0.5",
+            "sub_path": "process/0.20mm Speed @Prusa XL 0.5.json"
         },
         {
-            "name": "0.15mm Structural @XLIS 0.5",
-            "sub_path": "process/0.15mm Structural @XLIS 0.5.json"
+            "name": "0.15mm Structural @Prusa XL 0.5",
+            "sub_path": "process/0.15mm Structural @Prusa XL 0.5.json"
         },
         {
-            "name": "0.10mm Structural @XLIS 0.5",
-            "sub_path": "process/0.10mm Structural @XLIS 0.5.json"
+            "name": "0.10mm Structural @Prusa XL 0.5",
+            "sub_path": "process/0.10mm Structural @Prusa XL 0.5.json"
         },
         {
-            "name": "0.32mm Structural @XLIS 0.6",
-            "sub_path": "process/0.32mm Structural @XLIS 0.6.json"
+            "name": "0.32mm Structural @Prusa XL 0.6",
+            "sub_path": "process/0.32mm Structural @Prusa XL 0.6.json"
         },
         {
-            "name": "0.32mm Speed @XLIS 0.6",
-            "sub_path": "process/0.32mm Speed @XLIS 0.6.json"
+            "name": "0.32mm Speed @Prusa XL 0.6",
+            "sub_path": "process/0.32mm Speed @Prusa XL 0.6.json"
         },
         {
-            "name": "0.25mm Structural @XLIS 0.6",
-            "sub_path": "process/0.25mm Structural @XLIS 0.6.json"
+            "name": "0.25mm Structural @Prusa XL 0.6",
+            "sub_path": "process/0.25mm Structural @Prusa XL 0.6.json"
         },
         {
-            "name": "0.25mm Speed @XLIS 0.6",
-            "sub_path": "process/0.25mm Speed @XLIS 0.6.json"
+            "name": "0.25mm Speed @Prusa XL 0.6",
+            "sub_path": "process/0.25mm Speed @Prusa XL 0.6.json"
         },
         {
-            "name": "0.20mm Structural @XLIS 0.6",
-            "sub_path": "process/0.20mm Structural @XLIS 0.6.json"
+            "name": "0.20mm Structural @Prusa XL 0.6",
+            "sub_path": "process/0.20mm Structural @Prusa XL 0.6.json"
         },
         {
-            "name": "0.20mm Speed @XLIS 0.6",
-            "sub_path": "process/0.20mm Speed @XLIS 0.6.json"
+            "name": "0.20mm Speed @Prusa XL 0.6",
+            "sub_path": "process/0.20mm Speed @Prusa XL 0.6.json"
         },
         {
-            "name": "0.15mm Structural @XLIS 0.6",
-            "sub_path": "process/0.15mm Structural @XLIS 0.6.json"
+            "name": "0.15mm Structural @Prusa XL 0.6",
+            "sub_path": "process/0.15mm Structural @Prusa XL 0.6.json"
         },
         {
-            "name": "0.55mm Draft @XLIS 0.8",
-            "sub_path": "process/0.55mm Draft @XLIS 0.8.json"
+            "name": "0.55mm Draft @Prusa XL 0.8",
+            "sub_path": "process/0.55mm Draft @Prusa XL 0.8.json"
         },
         {
-            "name": "0.40mm Quality @XLIS 0.8",
-            "sub_path": "process/0.40mm Quality @XLIS 0.8.json"
+            "name": "0.40mm Quality @Prusa XL 0.8",
+            "sub_path": "process/0.40mm Quality @Prusa XL 0.8.json"
         },
         {
-            "name": "0.30mm Detail @XLIS 0.8",
-            "sub_path": "process/0.30mm Detail @XLIS 0.8.json"
+            "name": "0.30mm Detail @Prusa XL 0.8",
+            "sub_path": "process/0.30mm Detail @Prusa XL 0.8.json"
         }
     ],
     "filament_list": [
@@ -763,28 +763,28 @@
             "sub_path": "machine/Prusa MINI 0.8 nozzle.json"
         },
         {
-            "name": "Prusa XLIS 0.25 nozzle",
-            "sub_path": "machine/Prusa XLIS 0.25 nozzle.json"
+            "name": "Prusa XL 0.25 nozzle",
+            "sub_path": "machine/Prusa XL 0.25 nozzle.json"
         },
         {
-            "name": "Prusa XLIS 0.3 nozzle",
-            "sub_path": "machine/Prusa XLIS 0.3 nozzle.json"
+            "name": "Prusa XL 0.3 nozzle",
+            "sub_path": "machine/Prusa XL 0.3 nozzle.json"
         },
         {
-            "name": "Prusa XLIS 0.4 nozzle",
-            "sub_path": "machine/Prusa XLIS 0.4 nozzle.json"
+            "name": "Prusa XL 0.4 nozzle",
+            "sub_path": "machine/Prusa XL 0.4 nozzle.json"
         },
         {
-            "name": "Prusa XLIS 0.5 nozzle",
-            "sub_path": "machine/Prusa XLIS 0.5 nozzle.json"
+            "name": "Prusa XL 0.5 nozzle",
+            "sub_path": "machine/Prusa XL 0.5 nozzle.json"
         },
         {
-            "name": "Prusa XLIS 0.6 nozzle",
-            "sub_path": "machine/Prusa XLIS 0.6 nozzle.json"
+            "name": "Prusa XL 0.6 nozzle",
+            "sub_path": "machine/Prusa XL 0.6 nozzle.json"
         },
         {
-            "name": "Prusa XLIS 0.8 nozzle",
-            "sub_path": "machine/Prusa XLIS 0.8 nozzle.json"
+            "name": "Prusa XL 0.8 nozzle",
+            "sub_path": "machine/Prusa XL 0.8 nozzle.json"
         }
     ]
 }
diff --git a/resources/profiles/Prusa/Prusa XL.svg b/resources/profiles/Prusa/Prusa XL.svg
new file mode 100644
index 00000000000..4ebe0c97edc
--- /dev/null
+++ b/resources/profiles/Prusa/Prusa XL.svg	
@@ -0,0 +1,17 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   data-name="Layer 1"
+   width="360mm"
+   height="360mm"
+   viewBox="0 0 1020.5 1020.5"
+   version="1.1"
+   id="svg4"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:svg="http://www.w3.org/2000/svg">
+  <defs
+     id="defs4" />
+  <path
+     d="m 584.3,964.3 c 0,-1.9 0.3,-3.7 0.9,-5.3 0.6,-1.7 1.4,-3.1 2.5,-4.3 1.1,-1.2 2.4,-2.2 4,-2.9 1.6,-0.7 3.3,-1 5.3,-1 2,0 3.8,0.3 5.3,1 1.6,0.7 2.9,1.7 4,2.9 1.1,1.2 1.9,2.7 2.5,4.3 0.6,1.7 0.9,3.4 0.9,5.3 0,1.9 -0.3,3.6 -0.9,5.2 -0.6,1.6 -1.4,3 -2.5,4.2 -1.1,1.2 -2.4,2.1 -4,2.8 -1.6,0.7 -3.3,1 -5.3,1 -2,0 -3.8,-0.3 -5.3,-1 -1.6,-0.7 -2.9,-1.6 -4,-2.8 -1.1,-1.2 -1.9,-2.6 -2.5,-4.2 -0.6,-1.6 -0.9,-3.4 -0.9,-5.2 z m 5.7,0 c 0,1.1 0.1,2.1 0.4,3.2 0.3,1.1 0.7,1.9 1.2,2.8 0.6,0.8 1.3,1.5 2.2,2 0.9,0.5 2,0.7 3.2,0.7 1.2,0 2.4,-0.2 3.2,-0.7 0.9,-0.5 1.6,-1.1 2.2,-2 0.6,-0.8 1,-1.7 1.2,-2.8 0.2,-1.1 0.4,-2.1 0.4,-3.2 0,-1.1 -0.1,-2.2 -0.4,-3.3 -0.3,-1.1 -0.7,-2 -1.2,-2.8 -0.5,-0.8 -1.3,-1.5 -2.2,-2 -0.9,-0.5 -2,-0.7 -3.2,-0.7 -1.2,0 -2.4,0.2 -3.2,0.7 -0.9,0.5 -1.6,1.2 -2.2,2 -0.6,0.8 -1,1.8 -1.2,2.8 -0.3,1.1 -0.4,2.1 -0.4,3.3 z m 23.4,-13 h 13.9 c 1.2,0 2.2,0.2 3.1,0.6 0.9,0.4 1.7,0.9 2.4,1.5 0.7,0.6 1.2,1.4 1.5,2.3 0.3,0.9 0.5,1.8 0.5,2.7 0,1.5 -0.3,2.8 -1,3.9 -0.6,1.1 -1.7,1.9 -3.1,2.5 0.7,0.3 1.3,0.6 1.7,1 0.5,0.4 0.8,0.9 1.1,1.4 0.3,0.6 0.5,1.1 0.6,1.8 0.1,0.6 0.2,1.3 0.3,1.9 v 1.4 c 0,0.6 0,1.1 0.1,1.7 0,0.6 0.2,1.1 0.3,1.6 0.1,0.5 0.3,1 0.6,1.3 h -5.7 c -0.2,-0.4 -0.3,-0.9 -0.4,-1.3 0,-0.5 -0.2,-1 -0.2,-1.5 0,-0.5 -0.1,-1.1 -0.1,-1.7 0,-0.6 0,-1.1 -0.2,-1.6 -0.2,-1.3 -0.6,-2.3 -1.2,-3 -0.6,-0.6 -1.6,-0.9 -3.1,-0.9 h -5.7 v 10 h -5.7 v -25.7 z m 5.7,11.6 h 6.2 c 1.3,0 2.2,-0.3 2.9,-0.9 0.7,-0.6 1,-1.5 1,-2.8 0,-1.3 -0.3,-2.2 -1,-2.7 -0.7,-0.6 -1.6,-0.8 -2.9,-0.8 h -6.2 z m 20.3,-11.6 h 5.7 V 977 h -5.7 z m 29.2,22.8 c -1,1.3 -2.1,2.2 -3.3,2.7 -1.2,0.5 -2.5,0.8 -3.7,0.8 -2,0 -3.8,-0.3 -5.3,-1 -1.6,-0.7 -2.9,-1.6 -4,-2.8 -1.1,-1.2 -1.9,-2.6 -2.5,-4.2 -0.6,-1.6 -0.9,-3.4 -0.9,-5.2 0,-1.8 0.3,-3.7 0.9,-5.3 0.6,-1.7 1.4,-3.1 2.5,-4.3 1.1,-1.2 2.4,-2.2 4,-2.9 1.6,-0.7 3.3,-1 5.3,-1 2,0 2.6,0.2 3.8,0.6 1.2,0.4 2.3,1 3.3,1.7 1,0.8 1.8,1.7 2.5,2.8 0.7,1.1 1.1,2.4 1.2,3.9 H 667 c -0.3,-1.4 -1,-2.5 -2,-3.2 -1,-0.7 -2.1,-1.1 -3.5,-1.1 -1.4,0 -2.4,0.2 -3.2,0.7 -0.9,0.5 -1.6,1.2 -2.2,2 -0.6,0.8 -1,1.8 -1.2,2.8 -0.3,1.1 -0.4,2.1 -0.4,3.3 0,1.2 0.1,2.1 0.4,3.2 0.3,1.1 0.7,1.9 1.2,2.8 0.6,0.8 1.3,1.5 2.2,2 0.9,0.5 2,0.7 3.2,0.7 1.8,0 3.3,-0.5 4.3,-1.4 1,-0.9 1.6,-2.3 1.8,-4.1 h -5.7 v -4.2 h 10.8 v 13.9 h -3.6 l -0.6,-2.9 z m 8.8,-22.8 h 5.7 V 977 h -5.7 z m 10.6,0 h 5.6 l 10.7,17.2 v -17.2 h 5.3 V 977 h -5.7 L 693.2,959.8 V 977 h -5.3 v -25.7 z m 33.7,0 h 5.8 l 9.6,25.7 h -5.9 l -1.9,-5.7 h -9.6 l -2,5.7 H 712 l 9.8,-25.7 z m -0.5,15.8 h 6.7 l -3.2,-9.4 -3.3,9.4 z m 18.1,-15.8 h 5.7 v 21 h 12.5 v 4.8 h -18.2 v -25.7 z m 31.4,0 h 11.6 c 1.6,0 3,0.2 4.1,0.7 1.1,0.5 2,1.1 2.8,1.9 0.7,0.8 1.2,1.7 1.5,2.6 0.3,1 0.5,2 0.5,3 0,1 -0.2,2.1 -0.5,3.1 -0.3,1 -0.8,1.9 -1.5,2.6 -0.7,0.8 -1.6,1.4 -2.8,1.9 -1.2,0.5 -2.5,0.7 -4.1,0.7 h -5.9 v 9.2 h -5.7 z m 5.7,12.1 h 4.4 c 0.6,0 1.3,0 1.9,-0.1 0.6,0 1.1,-0.3 1.6,-0.6 0.5,-0.3 0.8,-0.7 1.1,-1.2 0.3,-0.5 0.4,-1.2 0.4,-2 0,-0.8 -0.1,-1.5 -0.4,-2 -0.3,-0.5 -0.6,-0.9 -1.1,-1.2 -0.5,-0.3 -1,-0.5 -1.6,-0.6 -0.6,0 -1.2,-0.1 -1.9,-0.1 h -4.4 v 7.7 z m 18.3,-12.1 h 13.9 c 1.2,0 2.2,0.2 3.1,0.6 0.9,0.4 1.7,0.9 2.4,1.5 0.7,0.6 1.2,1.4 1.5,2.3 0.3,0.9 0.5,1.8 0.5,2.7 0,1.5 -0.3,2.8 -1,3.9 -0.6,1.1 -1.7,1.9 -3.1,2.5 0.7,0.3 1.3,0.6 1.7,1 0.5,0.4 0.8,0.9 1.1,1.4 0.3,0.6 0.5,1.1 0.6,1.8 0.1,0.6 0.2,1.3 0.3,1.9 v 1.4 c 0,0.6 0,1.1 0.1,1.7 0,0.6 0.2,1.1 0.3,1.6 0.1,0.5 0.3,1 0.6,1.3 H 811 c -0.2,-0.4 -0.3,-0.9 -0.4,-1.3 -0.1,-0.4 -0.2,-1 -0.2,-1.5 0,-0.5 -0.1,-1.1 -0.1,-1.7 0,-0.6 0,-1.1 -0.2,-1.6 -0.2,-1.3 -0.6,-2.3 -1.2,-3 -0.6,-0.6 -1.6,-0.9 -3.1,-0.9 h -5.7 v 10 h -5.7 v -25.7 z m 5.7,11.6 h 6.2 c 1.3,0 2.2,-0.3 2.9,-0.9 0.7,-0.6 1,-1.5 1,-2.8 0,-1.3 -0.3,-2.2 -1,-2.7 -0.7,-0.6 -1.6,-0.8 -2.9,-0.8 h -6.2 z m 42.1,4.4 c 0,3.5 -1,6.1 -2.9,7.8 -1.9,1.7 -4.6,2.6 -8.1,2.6 -3.5,0 -6.2,-0.8 -8.1,-2.5 -1.9,-1.7 -2.9,-4.3 -2.9,-7.8 v -16 h 5.7 v 16 c 0,0.7 0,1.4 0.2,2.1 0.2,0.7 0.4,1.3 0.8,1.8 0.4,0.5 0.9,0.9 1.6,1.3 0.7,0.3 1.6,0.5 2.8,0.5 2,0 3.4,-0.5 4.2,-1.4 0.8,-0.9 1.2,-2.3 1.2,-4.2 v -16 h 5.7 v 16 z m 8.7,1.2 c 0,0.9 0.2,1.6 0.5,2.2 0.3,0.6 0.7,1.1 1.2,1.5 0.5,0.4 1.1,0.6 1.8,0.8 0.7,0.2 1.4,0.3 2.2,0.3 0.8,0 1,0 1.6,-0.1 0.6,0 1.1,-0.2 1.6,-0.5 0.5,-0.3 0.9,-0.6 1.3,-1 0.3,-0.4 0.5,-1 0.5,-1.6 0,-0.6 -0.2,-1.3 -0.7,-1.7 -0.4,-0.4 -1,-0.8 -1.7,-1.1 -0.7,-0.3 -1.5,-0.6 -2.4,-0.8 -0.9,-0.2 -1.8,-0.4 -2.8,-0.7 -1,-0.2 -1.9,-0.5 -2.8,-0.9 -0.9,-0.3 -1.7,-0.8 -2.4,-1.3 -0.7,-0.6 -1.3,-1.2 -1.7,-2.1 -0.4,-0.8 -0.7,-1.8 -0.7,-3 0,-1.2 0.3,-2.5 0.8,-3.4 0.6,-1 1.3,-1.8 2.2,-2.4 0.9,-0.6 1.9,-1.1 3.1,-1.4 1.2,-0.3 2.3,-0.5 3.5,-0.5 1.2,0 2.6,0.2 3.9,0.5 1.2,0.3 2.3,0.8 3.3,1.5 1,0.7 1.7,1.5 2.3,2.6 0.6,1 0.8,2.3 0.8,3.8 h -5.5 c 0,-0.8 -0.2,-1.4 -0.5,-1.9 -0.3,-0.5 -0.6,-0.9 -1.1,-1.2 -0.5,-0.3 -1,-0.5 -1.6,-0.6 -0.6,-0.1 -1.2,-0.2 -1.9,-0.2 -0.7,0 -0.9,0 -1.4,0.1 -0.5,0 -0.9,0.3 -1.2,0.5 -0.4,0.2 -0.7,0.5 -0.9,0.9 -0.2,0.4 -0.4,0.8 -0.4,1.4 0,0.6 0,0.9 0.3,1.2 0.2,0.3 0.6,0.6 1.1,0.8 0.6,0.3 1.3,0.5 2.3,0.8 1,0.3 2.3,0.6 3.9,1 0.3,0 0.7,0.2 1.2,0.3 0.5,0.1 1,0.3 1.6,0.5 0.6,0.2 1.1,0.5 1.7,0.9 0.6,0.4 1.1,0.8 1.5,1.3 0.5,0.5 0.8,1.2 1.1,1.9 0.3,0.7 0.4,1.6 0.4,2.5 0,0.9 -0.2,2.3 -0.7,3.3 -0.5,1 -1.1,1.9 -2,2.6 -0.9,0.7 -2,1.3 -3.3,1.7 -1.3,0.4 -2.9,0.6 -4.6,0.6 -1.7,0 -2.8,-0.2 -4.1,-0.5 -1.3,-0.4 -2.5,-0.9 -3.5,-1.7 -1,-0.7 -1.8,-1.7 -2.4,-2.8 -0.6,-1.2 -0.9,-2.5 -0.9,-4.1 z m 26.5,-17.2 h 5.8 l 9.6,25.7 h -5.9 l -1.9,-5.7 h -9.6 l -2,5.7 H 868 l 9.8,-25.7 z m -0.5,15.8 h 6.7 l -3.2,-9.4 -3.3,9.4 z m 34.5,-3.5 -8.3,-12.2 h 6.6 l 5,8.2 5.2,-8.2 h 6.2 l -8.2,12.3 9,13.4 h -6.7 l -5.6,-8.9 -5.7,8.9 h -6.4 l 9,-13.5 z m 17.7,-12.3 h 5.7 v 21 h 12.5 v 4.8 h -18.2 v -25.7 z"
+     style="fill:#ffffff"
+     id="path4" />
+</svg>
diff --git a/resources/profiles/Prusa/Pursa XL Input Shaper_bed.stl b/resources/profiles/Prusa/Prusa XL_bed.stl
similarity index 100%
rename from resources/profiles/Prusa/Pursa XL Input Shaper_bed.stl
rename to resources/profiles/Prusa/Prusa XL_bed.stl
diff --git a/resources/profiles/Prusa/Pursa XL Input Shaper_cover.png b/resources/profiles/Prusa/Prusa XL_cover.png
similarity index 100%
rename from resources/profiles/Prusa/Pursa XL Input Shaper_cover.png
rename to resources/profiles/Prusa/Prusa XL_cover.png
diff --git a/resources/profiles/Prusa/Pursa XL Input Shaper.svg b/resources/profiles/Prusa/Pursa XL Input Shaper.svg
deleted file mode 100644
index ca0b2c6c795..00000000000
--- a/resources/profiles/Prusa/Pursa XL Input Shaper.svg	
+++ /dev/null
@@ -1 +0,0 @@
-<svg data-name="Layer 1" xmlns="http://www.w3.org/2000/svg" width="360mm" height="360mm" viewBox="0 0 1020.5 1020.5"><path style="fill:none;stroke:#fff;stroke-miterlimit:10;stroke-width:5.7px" d="M0 0h1020.5v1020.5H0z"/><path style="fill:none;stroke:#fff;stroke-miterlimit:10;stroke-width:.7px" d="M0 0h1020.5v1020.5H0zM0 992.1h1020.5M954 963.8h66.5M0 963.8h576.3M0 935.4h1020.5M0 907.1h1020.5M0 878.7h1020.5M0 850.4h1020.5M0 822h1020.5M0 793.7h1020.5M0 765.4h1020.5M0 737h1020.5M0 708.7h1020.5M0 680.3h1020.5M0 652h1020.5M0 623.6h1020.5M0 595.3h1020.5M0 566.9h1020.5M0 538.6h1020.5M0 510.2h1020.5M0 481.9h1020.5M0 453.5h1020.5M0 425.2h1020.5M0 396.9h1020.5M0 368.5h1020.5M0 340.2h1020.5M0 311.8h1020.5M0 283.5h1020.5M0 255.1h1020.5M0 226.8h1020.5M0 198.4h1020.5M0 170.1h1020.5M0 141.7h1020.5M0 113.4h1020.5M0 85h1020.5M0 56.7h1020.5M0 28.3h1020.5M992.1 0v1020.5M963.8 0v1020.5M935.4 984.3v36.2M935.4 0v944.9M907.1 984.3v36.2M907.1 0v944.9M878.8 984.3l-.1 36.2M878.7 0v944.9M850.5 984.3l-.1 36.2M850.4 0v944.9M822.1 984.3l-.1 36.2M822 0v944.9M793.8 984.3l-.1 36.2M793.7 0v944.9M765.4 0v935.4M737 984.2v36.3M737 0v944.9M708.7 984.2v36.3M708.7 0v944.9M680.3 984.2v36.3M680.3 0v944.9M652 984.2v36.3M652 0v944.9M623.6 984.2v36.3M623.6 0v944.9M595.3 984.2v36.3M595.3 0v944.9M566.9 0v1020.5M538.6 0v1020.5M510.2 0v1020.5M481.9 0v1020.5M453.5 0v1020.5M425.2 0v1020.5M396.9 0v1020.5M368.5 0v1020.5M340.2 0v1020.5M311.8 0v1020.5M283.5 0v1020.5M255.1 0v1020.5M226.8 0v1020.5M198.4 0v1020.5M170.1 0v1020.5M141.7 0v1020.5M113.4 0v1020.5M85 0v1020.5M56.7 0v1020.5M28.3 0v1020.5"/><path style="fill:none;stroke:#fff;stroke-miterlimit:10;stroke-width:1.4px" d="M0 765.4h255.1v255.1H0zM255.1 765.4h255.1v255.1H255.1zM765.4 992.1v28.4H510.2V765.4h255.2v170M765.4 944.9V765.4h255.1v255.1H765.4v-36.3M0 510.2h255.1v255.1H0zM255.1 510.2h255.1v255.1H255.1zM510.2 510.2h255.1v255.1H510.2zM765.4 510.2h255.1v255.1H765.4zM0 255.1h255.1v255.1H0zM255.1 255.1h255.1v255.1H255.1zM510.2 255.1h255.1v255.1H510.2zM765.4 255.1h255.1v255.1H765.4zM0 0h255.1v255.1H0zM255.1 0h255.1v255.1H255.1zM510.2 0h255.1v255.1H510.2zM765.4 0h255.1v255.1H765.4z"/><path d="M584.3 964.3c0-1.9.3-3.7.9-5.3.6-1.7 1.4-3.1 2.5-4.3 1.1-1.2 2.4-2.2 4-2.9 1.6-.7 3.3-1 5.3-1s3.8.3 5.3 1c1.6.7 2.9 1.7 4 2.9s1.9 2.7 2.5 4.3c.6 1.7.9 3.4.9 5.3s-.3 3.6-.9 5.2c-.6 1.6-1.4 3-2.5 4.2-1.1 1.2-2.4 2.1-4 2.8-1.6.7-3.3 1-5.3 1s-3.8-.3-5.3-1c-1.6-.7-2.9-1.6-4-2.8-1.1-1.2-1.9-2.6-2.5-4.2-.6-1.6-.9-3.4-.9-5.2Zm5.7 0c0 1.1.1 2.1.4 3.2s.7 1.9 1.2 2.8c.6.8 1.3 1.5 2.2 2 .9.5 2 .7 3.2.7s2.4-.2 3.2-.7c.9-.5 1.6-1.1 2.2-2 .6-.8 1-1.7 1.2-2.8s.4-2.1.4-3.2-.1-2.2-.4-3.3c-.3-1.1-.7-2-1.2-2.8s-1.3-1.5-2.2-2c-.9-.5-2-.7-3.2-.7s-2.4.2-3.2.7c-.9.5-1.6 1.2-2.2 2-.6.8-1 1.8-1.2 2.8-.3 1.1-.4 2.1-.4 3.3ZM613.4 951.3h13.9c1.2 0 2.2.2 3.1.6.9.4 1.7.9 2.4 1.5s1.2 1.4 1.5 2.3c.3.9.5 1.8.5 2.7 0 1.5-.3 2.8-1 3.9-.6 1.1-1.7 1.9-3.1 2.5.7.3 1.3.6 1.7 1 .5.4.8.9 1.1 1.4.3.6.5 1.1.6 1.8.1.6.2 1.3.3 1.9v1.4c0 .6 0 1.1.1 1.7 0 .6.2 1.1.3 1.6.1.5.3 1 .6 1.3h-5.7c-.2-.4-.3-.9-.4-1.3 0-.5-.2-1-.2-1.5s-.1-1.1-.1-1.7c0-.6 0-1.1-.2-1.6-.2-1.3-.6-2.3-1.2-3-.6-.6-1.6-.9-3.1-.9h-5.7v10h-5.7v-25.7Zm5.7 11.6h6.2c1.3 0 2.2-.3 2.9-.9.7-.6 1-1.5 1-2.8s-.3-2.2-1-2.7c-.7-.6-1.6-.8-2.9-.8h-6.2v7.2ZM639.4 951.3h5.7V977h-5.7v-25.7ZM668.6 974.1c-1 1.3-2.1 2.2-3.3 2.7-1.2.5-2.5.8-3.7.8-2 0-3.8-.3-5.3-1-1.6-.7-2.9-1.6-4-2.8-1.1-1.2-1.9-2.6-2.5-4.2-.6-1.6-.9-3.4-.9-5.2s.3-3.7.9-5.3c.6-1.7 1.4-3.1 2.5-4.3 1.1-1.2 2.4-2.2 4-2.9 1.6-.7 3.3-1 5.3-1s2.6.2 3.8.6c1.2.4 2.3 1 3.3 1.7 1 .8 1.8 1.7 2.5 2.8s1.1 2.4 1.2 3.9H667c-.3-1.4-1-2.5-2-3.2-1-.7-2.1-1.1-3.5-1.1s-2.4.2-3.2.7c-.9.5-1.6 1.2-2.2 2-.6.8-1 1.8-1.2 2.8-.3 1.1-.4 2.1-.4 3.3s.1 2.1.4 3.2.7 1.9 1.2 2.8c.6.8 1.3 1.5 2.2 2 .9.5 2 .7 3.2.7 1.8 0 3.3-.5 4.3-1.4 1-.9 1.6-2.3 1.8-4.1h-5.7v-4.2h10.8v13.9h-3.6l-.6-2.9ZM677.4 951.3h5.7V977h-5.7v-25.7ZM688 951.3h5.6l10.7 17.2v-17.2h5.3V977h-5.7l-10.7-17.2V977h-5.3v-25.7ZM721.7 951.3h5.8l9.6 25.7h-5.9l-1.9-5.7h-9.6l-2 5.7H712l9.8-25.7Zm-.5 15.8h6.7l-3.2-9.4-3.3 9.4ZM739.3 951.3h5.7v21h12.5v4.8h-18.2v-25.7ZM770.7 951.3h11.6c1.6 0 3 .2 4.1.7s2 1.1 2.8 1.9c.7.8 1.2 1.7 1.5 2.6.3 1 .5 2 .5 3s-.2 2.1-.5 3.1-.8 1.9-1.5 2.6c-.7.8-1.6 1.4-2.8 1.9s-2.5.7-4.1.7h-5.9v9.2h-5.7v-25.7Zm5.7 12.1h4.4c.6 0 1.3 0 1.9-.1.6 0 1.1-.3 1.6-.6s.8-.7 1.1-1.2c.3-.5.4-1.2.4-2s-.1-1.5-.4-2c-.3-.5-.6-.9-1.1-1.2-.5-.3-1-.5-1.6-.6-.6 0-1.2-.1-1.9-.1h-4.4v7.7ZM794.7 951.3h13.9c1.2 0 2.2.2 3.1.6.9.4 1.7.9 2.4 1.5s1.2 1.4 1.5 2.3c.3.9.5 1.8.5 2.7 0 1.5-.3 2.8-1 3.9-.6 1.1-1.7 1.9-3.1 2.5.7.3 1.3.6 1.7 1 .5.4.8.9 1.1 1.4.3.6.5 1.1.6 1.8.1.6.2 1.3.3 1.9v1.4c0 .6 0 1.1.1 1.7 0 .6.2 1.1.3 1.6.1.5.3 1 .6 1.3H811c-.2-.4-.3-.9-.4-1.3s-.2-1-.2-1.5-.1-1.1-.1-1.7c0-.6 0-1.1-.2-1.6-.2-1.3-.6-2.3-1.2-3-.6-.6-1.6-.9-3.1-.9h-5.7v10h-5.7v-25.7Zm5.7 11.6h6.2c1.3 0 2.2-.3 2.9-.9.7-.6 1-1.5 1-2.8s-.3-2.2-1-2.7c-.7-.6-1.6-.8-2.9-.8h-6.2v7.2ZM842.5 967.3c0 3.5-1 6.1-2.9 7.8-1.9 1.7-4.6 2.6-8.1 2.6s-6.2-.8-8.1-2.5c-1.9-1.7-2.9-4.3-2.9-7.8v-16h5.7v16c0 .7 0 1.4.2 2.1s.4 1.3.8 1.8.9.9 1.6 1.3c.7.3 1.6.5 2.8.5 2 0 3.4-.5 4.2-1.4.8-.9 1.2-2.3 1.2-4.2v-16h5.7v16ZM851.2 968.5c0 .9.2 1.6.5 2.2.3.6.7 1.1 1.2 1.5.5.4 1.1.6 1.8.8.7.2 1.4.3 2.2.3s1 0 1.6-.1c.6 0 1.1-.2 1.6-.5s.9-.6 1.3-1c.3-.4.5-1 .5-1.6s-.2-1.3-.7-1.7c-.4-.4-1-.8-1.7-1.1-.7-.3-1.5-.6-2.4-.8-.9-.2-1.8-.4-2.8-.7-1-.2-1.9-.5-2.8-.9-.9-.3-1.7-.8-2.4-1.3-.7-.6-1.3-1.2-1.7-2.1-.4-.8-.7-1.8-.7-3s.3-2.5.8-3.4c.6-1 1.3-1.8 2.2-2.4.9-.6 1.9-1.1 3.1-1.4 1.2-.3 2.3-.5 3.5-.5s2.6.2 3.9.5c1.2.3 2.3.8 3.3 1.5s1.7 1.5 2.3 2.6c.6 1 .8 2.3.8 3.8h-5.5c0-.8-.2-1.4-.5-1.9s-.6-.9-1.1-1.2c-.5-.3-1-.5-1.6-.6-.6-.1-1.2-.2-1.9-.2s-.9 0-1.4.1c-.5 0-.9.3-1.2.5-.4.2-.7.5-.9.9-.2.4-.4.8-.4 1.4s0 .9.3 1.2c.2.3.6.6 1.1.8.6.3 1.3.5 2.3.8 1 .3 2.3.6 3.9 1 .3 0 .7.2 1.2.3.5.1 1 .3 1.6.5.6.2 1.1.5 1.7.9.6.4 1.1.8 1.5 1.3.5.5.8 1.2 1.1 1.9.3.7.4 1.6.4 2.5s-.2 2.3-.7 3.3c-.5 1-1.1 1.9-2 2.6-.9.7-2 1.3-3.3 1.7-1.3.4-2.9.6-4.6.6s-2.8-.2-4.1-.5c-1.3-.4-2.5-.9-3.5-1.7-1-.7-1.8-1.7-2.4-2.8-.6-1.2-.9-2.5-.9-4.1h5.5ZM877.7 951.3h5.8l9.6 25.7h-5.9l-1.9-5.7h-9.6l-2 5.7H868l9.8-25.7Zm-.5 15.8h6.7l-3.2-9.4-3.3 9.4ZM911.7 963.6l-8.3-12.2h6.6l5 8.2 5.2-8.2h6.2l-8.2 12.3 9 13.4h-6.7l-5.6-8.9-5.7 8.9h-6.4l9-13.5ZM929.4 951.3h5.7v21h12.5v4.8h-18.2v-25.7Z" style="fill:#fff"/></svg>
\ No newline at end of file
diff --git a/resources/profiles/Prusa/filament/Prusa Generic ABS @XL.json b/resources/profiles/Prusa/filament/Prusa Generic ABS @XL.json
index 8e5bdbdcb70..544d644b272 100644
--- a/resources/profiles/Prusa/filament/Prusa Generic ABS @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusa Generic ABS @XL.json	
@@ -44,11 +44,11 @@
     "filament_retract_lift_below": "1.5",
     "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp",
     "compatible_printers": [
-        "Prusa XLIS 0.25 nozzle",
-        "Pursa XLIS 0.3 nozzle",
-        "Prusa XLIS 0.4 nozzle",
-        "Prusa XLIS 0.5 nozzle",
-        "Prusa XLIS 0.6 nozzle",
-        "Prusa XLIS 0.8 nozzle"
+        "Prusa XL 0.25 nozzle",
+        "Prusa XL 0.3 nozzle",
+        "Prusa XL 0.4 nozzle",
+        "Prusa XL 0.5 nozzle",
+        "Prusa XL 0.6 nozzle",
+        "Prusa XL 0.8 nozzle"
     ]
 }
diff --git a/resources/profiles/Prusa/filament/Prusa Generic PETG @XL.json b/resources/profiles/Prusa/filament/Prusa Generic PETG @XL.json
index 1b026b20f98..c2c535cd911 100644
--- a/resources/profiles/Prusa/filament/Prusa Generic PETG @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusa Generic PETG @XL.json	
@@ -47,11 +47,11 @@
     "filament_retract_before_wipe": "20%",
     "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.053{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.032{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
     "compatible_printers": [
-        "Prusa XLIS 0.25 nozzle",
-        "Pursa XLIS 0.3 nozzle",
-        "Prusa XLIS 0.4 nozzle",
-        "Prusa XLIS 0.5 nozzle",
-        "Prusa XLIS 0.6 nozzle",
-        "Prusa XLIS 0.8 nozzle"
+        "Prusa XL 0.25 nozzle",
+        "Prusa XL 0.3 nozzle",
+        "Prusa XL 0.4 nozzle",
+        "Prusa XL 0.5 nozzle",
+        "Prusa XL 0.6 nozzle",
+        "Prusa XL 0.8 nozzle"
     ]
 }
diff --git a/resources/profiles/Prusa/filament/Prusa Generic PLA @XL.json b/resources/profiles/Prusa/filament/Prusa Generic PLA @XL.json
index 8f8604d467b..06acddef204 100644
--- a/resources/profiles/Prusa/filament/Prusa Generic PLA @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusa Generic PLA @XL.json	
@@ -42,11 +42,11 @@
     "filament_retract_lift_below": "0.6",
     "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
     "compatible_printers": [
-        "Prusa XLIS 0.25 nozzle",
-        "Pursa XLIS 0.3 nozzle",
-        "Prusa XLIS 0.4 nozzle",
-        "Prusa XLIS 0.5 nozzle",
-        "Prusa XLIS 0.6 nozzle",
-        "Prusa XLIS 0.8 nozzle"
+        "Prusa XL 0.25 nozzle",
+        "Prusa XL 0.3 nozzle",
+        "Prusa XL 0.4 nozzle",
+        "Prusa XL 0.5 nozzle",
+        "Prusa XL 0.6 nozzle",
+        "Prusa XL 0.8 nozzle"
     ]
 }
diff --git a/resources/profiles/Prusa/filament/Prusament ASA @XL.json b/resources/profiles/Prusa/filament/Prusament ASA @XL.json
index cb056319bf9..36e1f6c6018 100644
--- a/resources/profiles/Prusa/filament/Prusament ASA @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusament ASA @XL.json	
@@ -46,11 +46,11 @@
     "filament_retract_lift_below": "1.5",
     "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp",
     "compatible_printers": [
-        "Prusa XLIS 0.25 nozzle",
-        "Pursa XLIS 0.3 nozzle",
-        "Prusa XLIS 0.4 nozzle",
-        "Prusa XLIS 0.5 nozzle",
-        "Prusa XLIS 0.6 nozzle",
-        "Prusa XLIS 0.8 nozzle"
+        "Prusa XL 0.25 nozzle",
+        "Prusa XL 0.3 nozzle",
+        "Prusa XL 0.4 nozzle",
+        "Prusa XL 0.5 nozzle",
+        "Prusa XL 0.6 nozzle",
+        "Prusa XL 0.8 nozzle"
     ]
 }
diff --git a/resources/profiles/Prusa/filament/Prusament PA-CF @XL.json b/resources/profiles/Prusa/filament/Prusament PA-CF @XL.json
index f17a18a6949..28d4862819a 100644
--- a/resources/profiles/Prusa/filament/Prusament PA-CF @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusament PA-CF @XL.json	
@@ -46,11 +46,11 @@
     "filament_retract_lift_below": "1.5",
     "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp",
     "compatible_printers": [
-        "Prusa XLIS 0.25 nozzle",
-        "Pursa XLIS 0.3 nozzle",
-        "Prusa XLIS 0.4 nozzle",
-        "Prusa XLIS 0.5 nozzle",
-        "Prusa XLIS 0.6 nozzle",
-        "Prusa XLIS 0.8 nozzle"
+        "Prusa XL 0.25 nozzle",
+        "Prusa XL 0.3 nozzle",
+        "Prusa XL 0.4 nozzle",
+        "Prusa XL 0.5 nozzle",
+        "Prusa XL 0.6 nozzle",
+        "Prusa XL 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend @XL.json b/resources/profiles/Prusa/filament/Prusament PC Blend @XL.json
index dbe4ebc9634..a2bfaada985 100644
--- a/resources/profiles/Prusa/filament/Prusament PC Blend @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusament PC Blend @XL.json	
@@ -46,11 +46,11 @@
     "filament_retract_lift_below": "1.5",
     "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp",
     "compatible_printers": [
-        "Prusa XLIS 0.25 nozzle",
-        "Pursa XLIS 0.3 nozzle",
-        "Prusa XLIS 0.4 nozzle",
-        "Prusa XLIS 0.5 nozzle",
-        "Prusa XLIS 0.6 nozzle",
-        "Prusa XLIS 0.8 nozzle"
+        "Prusa XL 0.25 nozzle",
+        "Prusa XL 0.3 nozzle",
+        "Prusa XL 0.4 nozzle",
+        "Prusa XL 0.5 nozzle",
+        "Prusa XL 0.6 nozzle",
+        "Prusa XL 0.8 nozzle"
     ]
 }
diff --git a/resources/profiles/Prusa/filament/Prusament PC-CF @XL.json b/resources/profiles/Prusa/filament/Prusament PC-CF @XL.json
index e8d1d3e723e..79c707f9996 100644
--- a/resources/profiles/Prusa/filament/Prusament PC-CF @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusament PC-CF @XL.json	
@@ -46,11 +46,11 @@
     "filament_retract_lift_below": "1.5",
     "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp",
     "compatible_printers": [
-        "Prusa XLIS 0.25 nozzle",
-        "Pursa XLIS 0.3 nozzle",
-        "Prusa XLIS 0.4 nozzle",
-        "Prusa XLIS 0.5 nozzle",
-        "Prusa XLIS 0.6 nozzle",
-        "Prusa XLIS 0.8 nozzle"
+        "Prusa XL 0.25 nozzle",
+        "Prusa XL 0.3 nozzle",
+        "Prusa XL 0.4 nozzle",
+        "Prusa XL 0.5 nozzle",
+        "Prusa XL 0.6 nozzle",
+        "Prusa XL 0.8 nozzle"
     ]
 }
diff --git a/resources/profiles/Prusa/filament/Prusament PETG @XL.json b/resources/profiles/Prusa/filament/Prusament PETG @XL.json
index 4eaa849d036..c4505feda5b 100644
--- a/resources/profiles/Prusa/filament/Prusament PETG @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusament PETG @XL.json	
@@ -47,11 +47,11 @@
     "filament_retract_before_wipe": "20%",
     "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.053{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.032{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
     "compatible_printers": [
-        "Prusa XLIS 0.25 nozzle",
-        "Pursa XLIS 0.3 nozzle",
-        "Prusa XLIS 0.4 nozzle",
-        "Prusa XLIS 0.5 nozzle",
-        "Prusa XLIS 0.6 nozzle",
-        "Prusa XLIS 0.8 nozzle"
+        "Prusa XL 0.25 nozzle",
+        "Prusa XL 0.3 nozzle",
+        "Prusa XL 0.4 nozzle",
+        "Prusa XL 0.5 nozzle",
+        "Prusa XL 0.6 nozzle",
+        "Prusa XL 0.8 nozzle"
     ]
 }
diff --git a/resources/profiles/Prusa/filament/Prusament PLA @XL.json b/resources/profiles/Prusa/filament/Prusament PLA @XL.json
index 3ee68ba1b55..949dfb23b30 100644
--- a/resources/profiles/Prusa/filament/Prusament PLA @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusament PLA @XL.json	
@@ -42,11 +42,11 @@
     "filament_retract_lift_below": "0.6",
     "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
     "compatible_printers": [
-        "Prusa XLIS 0.25 nozzle",
-        "Pursa XLIS 0.3 nozzle",
-        "Prusa XLIS 0.4 nozzle",
-        "Prusa XLIS 0.5 nozzle",
-        "Prusa XLIS 0.6 nozzle",
-        "Prusa XLIS 0.8 nozzle"
+        "Prusa XL 0.25 nozzle",
+        "Prusa XL 0.3 nozzle",
+        "Prusa XL 0.4 nozzle",
+        "Prusa XL 0.5 nozzle",
+        "Prusa XL 0.6 nozzle",
+        "Prusa XL 0.8 nozzle"
     ]
 }
diff --git a/resources/profiles/Prusa/filament/Prusament PVB @XL.json b/resources/profiles/Prusa/filament/Prusament PVB @XL.json
index 8e17c0ba192..c7e1e5fe0e5 100644
--- a/resources/profiles/Prusa/filament/Prusament PVB @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusament PVB @XL.json	
@@ -47,11 +47,11 @@
     "filament_retract_lift_below": "0.6",
     "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
     "compatible_printers": [
-        "Prusa XLIS 0.25 nozzle",
-        "Pursa XLIS 0.3 nozzle",
-        "Prusa XLIS 0.4 nozzle",
-        "Prusa XLIS 0.5 nozzle",
-        "Prusa XLIS 0.6 nozzle",
-        "Prusa XLIS 0.8 nozzle"
+        "Prusa XL 0.25 nozzle",
+        "Prusa XL 0.3 nozzle",
+        "Prusa XL 0.4 nozzle",
+        "Prusa XL 0.5 nozzle",
+        "Prusa XL 0.6 nozzle",
+        "Prusa XL 0.8 nozzle"
     ]
 }
diff --git a/resources/profiles/Prusa/filament/Prusament rPLA @XL.json b/resources/profiles/Prusa/filament/Prusament rPLA @XL.json
index 795878de734..6fa3b54c174 100644
--- a/resources/profiles/Prusa/filament/Prusament rPLA @XL.json	
+++ b/resources/profiles/Prusa/filament/Prusament rPLA @XL.json	
@@ -45,11 +45,11 @@
     "filament_retract_lift_below": "0.6",
     "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
     "compatible_printers": [
-        "Prusa XLIS 0.25 nozzle",
-        "Pursa XLIS 0.3 nozzle",
-        "Prusa XLIS 0.4 nozzle",
-        "Prusa XLIS 0.5 nozzle",
-        "Prusa XLIS 0.6 nozzle",
-        "Prusa XLIS 0.8 nozzle"
+        "Prusa XL 0.25 nozzle",
+        "Prusa XL 0.3 nozzle",
+        "Prusa XL 0.4 nozzle",
+        "Prusa XL 0.5 nozzle",
+        "Prusa XL 0.6 nozzle",
+        "Prusa XL 0.8 nozzle"
     ]
 }
diff --git a/resources/profiles/Prusa/machine/Prusa XLIS 0.25 nozzle.json b/resources/profiles/Prusa/machine/Prusa XL 0.25 nozzle.json
similarity index 97%
rename from resources/profiles/Prusa/machine/Prusa XLIS 0.25 nozzle.json
rename to resources/profiles/Prusa/machine/Prusa XL 0.25 nozzle.json
index f8ee60e938c..a8a7cd75da5 100644
--- a/resources/profiles/Prusa/machine/Prusa XLIS 0.25 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa XL 0.25 nozzle.json	
@@ -1,14 +1,14 @@
 {
   "type": "machine",
   "setting_id": "GM003",
-  "name": "Prusa XLIS 0.25 nozzle",
+  "name": "Prusa XL 0.25 nozzle",
   "from": "system",
   "instantiation": "true",
   "inherits": "fdm_machine_common",
   "gcode_flavor": "marlin2",
-  "printer_model": "Pursa XL Input Shaper",
+  "printer_model": "Prusa XL",
   "default_filament_profile": "Prusa Generic PLA @XL",
-  "default_print_profile": "0.15mm Speed @XLIS 0.25",
+  "default_print_profile": "0.15mm Speed @Prusa XL 0.25",
   "extruder_clearance_radius": "67",
   "extruder_clearance_height_to_rod": "21",
   "extruder_clearance_height_to_lid": "21",
@@ -95,7 +95,7 @@
   "wipe": "1",
   "retract_before_wipe": "80%",
   "retract_lift_below": "1.5",
-  "z_hop_types": "slope",
+  "z_hop_types": "Auto Lift",
   "host_type": "prusalink",
   "printable_height": "360",
   "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720{endif} ; Move bed down\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X6 Y350 F6000 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+100, max_print_height)} F300{endif} ; Move bed down\nM900 K0 ; reset LA\nM142 S36 ; reset heatbreak target temp\nM221 S100 ; reset flow percentage\nM84 ; disable motors\n; max_layer_z = [max_layer_z]",
diff --git a/resources/profiles/Prusa/machine/Prusa XLIS 0.3 nozzle.json b/resources/profiles/Prusa/machine/Prusa XL 0.3 nozzle.json
similarity index 97%
rename from resources/profiles/Prusa/machine/Prusa XLIS 0.3 nozzle.json
rename to resources/profiles/Prusa/machine/Prusa XL 0.3 nozzle.json
index b3ef7672e25..e83f1871a1c 100644
--- a/resources/profiles/Prusa/machine/Prusa XLIS 0.3 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa XL 0.3 nozzle.json	
@@ -1,14 +1,14 @@
 {
   "type": "machine",
   "setting_id": "GM003",
-  "name": "Prusa XLIS 0.3 nozzle",
+  "name": "Prusa XL 0.3 nozzle",
   "from": "system",
   "instantiation": "true",
   "inherits": "fdm_machine_common",
   "gcode_flavor": "marlin2",
-  "printer_model": "Pursa XL Input Shaper",
+  "printer_model": "Prusa XL",
   "default_filament_profile": "Prusa Generic PLA @XL",
-  "default_print_profile": "0.20mm Speed @XLIS 0.3",
+  "default_print_profile": "0.20mm Speed @Prusa XL 0.3",
   "extruder_clearance_radius": "67",
   "extruder_clearance_height_to_rod": "21",
   "extruder_clearance_height_to_lid": "21",
@@ -95,7 +95,7 @@
   "wipe": "1",
   "retract_before_wipe": "80%",
   "retract_lift_below": "1.5",
-  "z_hop_types": "slope",
+  "z_hop_types": "Auto Lift",
   "host_type": "prusalink",
   "printable_height": "360",
   "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720{endif} ; Move bed down\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X6 Y350 F6000 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+100, max_print_height)} F300{endif} ; Move bed down\nM900 K0 ; reset LA\nM142 S36 ; reset heatbreak target temp\nM221 S100 ; reset flow percentage\nM84 ; disable motors\n; max_layer_z = [max_layer_z]",
diff --git a/resources/profiles/Prusa/machine/Prusa XLIS 0.4 nozzle.json b/resources/profiles/Prusa/machine/Prusa XL 0.4 nozzle.json
similarity index 97%
rename from resources/profiles/Prusa/machine/Prusa XLIS 0.4 nozzle.json
rename to resources/profiles/Prusa/machine/Prusa XL 0.4 nozzle.json
index 9fc8e9ac877..cbb286aa5b6 100644
--- a/resources/profiles/Prusa/machine/Prusa XLIS 0.4 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa XL 0.4 nozzle.json	
@@ -1,14 +1,14 @@
 {
   "type": "machine",
   "setting_id": "GM003",
-  "name": "Prusa XLIS 0.4 nozzle",
+  "name": "Prusa XL 0.4 nozzle",
   "from": "system",
   "instantiation": "true",
   "inherits": "fdm_machine_common",
   "gcode_flavor": "marlin2",
-  "printer_model": "Pursa XL Input Shaper",
+  "printer_model": "Prusa XL",
   "default_filament_profile": "Prusa Generic PLA @XL",
-  "default_print_profile": "0.20mm Speed @XLIS 0.4",
+  "default_print_profile": "0.20mm Speed @Prusa XL 0.4",
   "extruder_clearance_radius": "67",
   "extruder_clearance_height_to_rod": "21",
   "extruder_clearance_height_to_lid": "21",
@@ -95,7 +95,7 @@
   "wipe": "1",
   "retract_before_wipe": "80%",
   "retract_lift_below": "1.5",
-  "z_hop_types": "slope",
+  "z_hop_types": "Auto Lift",
   "host_type": "prusalink",
   "printable_height": "360",
   "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720{endif} ; Move bed down\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X6 Y350 F6000 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+100, max_print_height)} F300{endif} ; Move bed down\nM900 K0 ; reset LA\nM142 S36 ; reset heatbreak target temp\nM221 S100 ; reset flow percentage\nM84 ; disable motors\n; max_layer_z = [max_layer_z]",
diff --git a/resources/profiles/Prusa/machine/Prusa XLIS 0.5 nozzle.json b/resources/profiles/Prusa/machine/Prusa XL 0.5 nozzle.json
similarity index 97%
rename from resources/profiles/Prusa/machine/Prusa XLIS 0.5 nozzle.json
rename to resources/profiles/Prusa/machine/Prusa XL 0.5 nozzle.json
index 1b5ac3683b0..937e88f016e 100644
--- a/resources/profiles/Prusa/machine/Prusa XLIS 0.5 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa XL 0.5 nozzle.json	
@@ -1,14 +1,14 @@
 {
   "type": "machine",
   "setting_id": "GM003",
-  "name": "Prusa XLIS 0.5 nozzle",
+  "name": "Prusa XL 0.5 nozzle",
   "from": "system",
   "instantiation": "true",
   "inherits": "fdm_machine_common",
   "gcode_flavor": "marlin2",
-  "printer_model": "Pursa XL Input Shaper",
+  "printer_model": "Prusa XL",
   "default_filament_profile": "Prusa Generic PLA @XL",
-  "default_print_profile": "0.25mm Speed @XLIS 0.5",
+  "default_print_profile": "0.25mm Speed @Prusa XL 0.5",
   "extruder_clearance_radius": "67",
   "extruder_clearance_height_to_rod": "21",
   "extruder_clearance_height_to_lid": "21",
@@ -95,7 +95,7 @@
   "wipe": "1",
   "retract_before_wipe": "80%",
   "retract_lift_below": "1.5",
-  "z_hop_types": "slope",
+  "z_hop_types": "Auto Lift",
   "host_type": "prusalink",
   "printable_height": "360",
   "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720{endif} ; Move bed down\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X6 Y350 F6000 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+100, max_print_height)} F300{endif} ; Move bed down\nM900 K0 ; reset LA\nM142 S36 ; reset heatbreak target temp\nM221 S100 ; reset flow percentage\nM84 ; disable motors\n; max_layer_z = [max_layer_z]",
diff --git a/resources/profiles/Prusa/machine/Prusa XLIS 0.6 nozzle.json b/resources/profiles/Prusa/machine/Prusa XL 0.6 nozzle.json
similarity index 97%
rename from resources/profiles/Prusa/machine/Prusa XLIS 0.6 nozzle.json
rename to resources/profiles/Prusa/machine/Prusa XL 0.6 nozzle.json
index 7dd5c731ba4..e0d47b46c61 100644
--- a/resources/profiles/Prusa/machine/Prusa XLIS 0.6 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa XL 0.6 nozzle.json	
@@ -1,14 +1,14 @@
 {
   "type": "machine",
   "setting_id": "GM003",
-  "name": "Prusa XLIS 0.6 nozzle",
+  "name": "Prusa XL 0.6 nozzle",
   "from": "system",
   "instantiation": "true",
   "inherits": "fdm_machine_common",
   "gcode_flavor": "marlin2",
-  "printer_model": "Pursa XL Input Shaper",
+  "printer_model": "Prusa XL",
   "default_filament_profile": "Prusa Generic PLA @XL",
-  "default_print_profile": "0.32mm Speed @XLIS 0.6",
+  "default_print_profile": "0.32mm Speed @Prusa XL 0.6",
   "extruder_clearance_radius": "67",
   "extruder_clearance_height_to_rod": "21",
   "extruder_clearance_height_to_lid": "21",
@@ -95,7 +95,7 @@
   "wipe": "1",
   "retract_before_wipe": "0%",
   "retract_lift_below": "1.5",
-  "z_hop_types": "slope",
+  "z_hop_types": "Auto Lift",
   "host_type": "prusalink",
   "printable_height": "360",
   "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720{endif} ; Move bed down\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X6 Y350 F6000 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+100, max_print_height)} F300{endif} ; Move bed down\nM900 K0 ; reset LA\nM142 S36 ; reset heatbreak target temp\nM221 S100 ; reset flow percentage\nM84 ; disable motors\n; max_layer_z = [max_layer_z]",
diff --git a/resources/profiles/Prusa/machine/Prusa XLIS 0.8 nozzle.json b/resources/profiles/Prusa/machine/Prusa XL 0.8 nozzle.json
similarity index 97%
rename from resources/profiles/Prusa/machine/Prusa XLIS 0.8 nozzle.json
rename to resources/profiles/Prusa/machine/Prusa XL 0.8 nozzle.json
index 3f3326a082f..85c1631bcb6 100644
--- a/resources/profiles/Prusa/machine/Prusa XLIS 0.8 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa XL 0.8 nozzle.json	
@@ -1,14 +1,14 @@
 {
   "type": "machine",
   "setting_id": "GM003",
-  "name": "Prusa XLIS 0.8 nozzle",
+  "name": "Prusa XL 0.8 nozzle",
   "from": "system",
   "instantiation": "true",
   "inherits": "fdm_machine_common",
   "gcode_flavor": "marlin2",
-  "printer_model": "Pursa XL Input Shaper",
+  "printer_model": "Prusa XL",
   "default_filament_profile": "Prusa Generic PLA @XL",
-  "default_print_profile": "0.40mm Quality @XLIS 0.8",
+  "default_print_profile": "0.40mm Quality @Prusa XL 0.8",
   "extruder_clearance_radius": "67",
   "extruder_clearance_height_to_rod": "21",
   "extruder_clearance_height_to_lid": "21",
@@ -95,7 +95,7 @@
   "wipe": "1",
   "retract_before_wipe": "50%",
   "retract_lift_below": "1.5",
-  "z_hop_types": "slope",
+  "z_hop_types": "Auto Lift",
   "host_type": "prusalink",
   "printable_height": "360",
   "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720{endif} ; Move bed down\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X6 Y350 F6000 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+100, max_print_height)} F300{endif} ; Move bed down\nM900 K0 ; reset LA\nM142 S36 ; reset heatbreak target temp\nM221 S100 ; reset flow percentage\nM84 ; disable motors\n; max_layer_z = [max_layer_z]",
diff --git a/resources/profiles/Prusa/machine/Prusa XLIS.json b/resources/profiles/Prusa/machine/Prusa XL.json
similarity index 71%
rename from resources/profiles/Prusa/machine/Prusa XLIS.json
rename to resources/profiles/Prusa/machine/Prusa XL.json
index 1d0ae08f51a..eb8487609c7 100644
--- a/resources/profiles/Prusa/machine/Prusa XLIS.json	
+++ b/resources/profiles/Prusa/machine/Prusa XL.json	
@@ -1,12 +1,12 @@
 {
     "type": "machine_model",
-    "name": "Pursa XL Input Shaper",
-    "model_id": "Pursa XLIS",
+    "name": "Prusa XL",
+    "model_id": "Prusa XL",
     "nozzle_diameter": "0.25;0.3;0.4;0.5;0.6;0.8",
     "machine_tech": "FFF",
     "family": "Prusa",
-    "bed_model": "Pursa XL Input Shaper_bed.stl",
-    "bed_texture": "Pursa XL Input Shaper.svg",
+    "bed_model": "Prusa XL_bed.stl",
+    "bed_texture": "Prusa XL.svg",
     "hotend_model": "",
     "default_materials": "Prusa Generic PLA @XL;Prusament PLA @XL;Prusament rPLA @XL;Prusa Generic PETG @XL;Prusament PETG @XL;Prusa Generic ABS @XL;Prusament ASA @XL;Prusament PC Blend @XL;Prusament PC-CF @XL;Prusament PVB @XL;Prusament PA-CF @XL"
 }
diff --git a/resources/profiles/Prusa/process/0.05mm Detail @XLIS 0.25.json b/resources/profiles/Prusa/process/0.05mm Detail @Prusa XL 0.25.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.05mm Detail @XLIS 0.25.json
rename to resources/profiles/Prusa/process/0.05mm Detail @Prusa XL 0.25.json
index 3f91bd5da45..408eecaf69b 100644
--- a/resources/profiles/Prusa/process/0.05mm Detail @XLIS 0.25.json	
+++ b/resources/profiles/Prusa/process/0.05mm Detail @Prusa XL 0.25.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.05mm Detail @XLIS 0.25",
+  "name": "0.05mm Detail @Prusa XL 0.25",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -62,6 +62,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0",
   "compatible_printers": [
-    "Prusa XLIS 0.25 nozzle"
+    "Prusa XL 0.25 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.07mm Detail @XLIS 0.25.json b/resources/profiles/Prusa/process/0.07mm Detail @Prusa XL 0.25.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.07mm Detail @XLIS 0.25.json
rename to resources/profiles/Prusa/process/0.07mm Detail @Prusa XL 0.25.json
index 7e41472a58b..e0c16d65529 100644
--- a/resources/profiles/Prusa/process/0.07mm Detail @XLIS 0.25.json	
+++ b/resources/profiles/Prusa/process/0.07mm Detail @Prusa XL 0.25.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.07mm Detail @XLIS 0.25",
+  "name": "0.07mm Detail @Prusa XL 0.25",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -62,6 +62,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0",
   "compatible_printers": [
-    "Prusa XLIS 0.25 nozzle"
+    "Prusa XL 0.25 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.10mm FastDetail @XLIS 0.4.json b/resources/profiles/Prusa/process/0.10mm FastDetail @Prusa XL 0.4.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.10mm FastDetail @XLIS 0.4.json
rename to resources/profiles/Prusa/process/0.10mm FastDetail @Prusa XL 0.4.json
index b2cdb1247d9..69947f0fc9a 100644
--- a/resources/profiles/Prusa/process/0.10mm FastDetail @XLIS 0.4.json	
+++ b/resources/profiles/Prusa/process/0.10mm FastDetail @Prusa XL 0.4.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.10mm FastDetail @XLIS 0.4",
+  "name": "0.10mm FastDetail @Prusa XL 0.4",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -62,6 +62,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.4 nozzle"
+    "Prusa XL 0.4 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.10mm Structural @XLIS 0.5.json b/resources/profiles/Prusa/process/0.10mm Structural @Prusa XL 0.5.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.10mm Structural @XLIS 0.5.json
rename to resources/profiles/Prusa/process/0.10mm Structural @Prusa XL 0.5.json
index 0a53b8f4c74..ff2f1c73ed3 100644
--- a/resources/profiles/Prusa/process/0.10mm Structural @XLIS 0.5.json	
+++ b/resources/profiles/Prusa/process/0.10mm Structural @Prusa XL 0.5.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.10mm Structural @XLIS 0.5",
+  "name": "0.10mm Structural @Prusa XL 0.5",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -63,6 +63,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.5 nozzle"
+    "Prusa XL 0.5 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.12mm Speed @XLIS 0.25.json b/resources/profiles/Prusa/process/0.12mm Speed @Prusa XL 0.25.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.12mm Speed @XLIS 0.25.json
rename to resources/profiles/Prusa/process/0.12mm Speed @Prusa XL 0.25.json
index 046ccc32fbd..59b981f9de0 100644
--- a/resources/profiles/Prusa/process/0.12mm Speed @XLIS 0.25.json	
+++ b/resources/profiles/Prusa/process/0.12mm Speed @Prusa XL 0.25.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.12mm Speed @XLIS 0.25",
+  "name": "0.12mm Speed @Prusa XL 0.25",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -62,6 +62,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0",
   "compatible_printers": [
-    "Prusa XLIS 0.25 nozzle"
+    "Prusa XL 0.25 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.12mm Structural @XLIS 0.25.json b/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 0.25.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.12mm Structural @XLIS 0.25.json
rename to resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 0.25.json
index 695dd0ba852..d6dd18a0430 100644
--- a/resources/profiles/Prusa/process/0.12mm Structural @XLIS 0.25.json	
+++ b/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 0.25.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.12mm Structural @XLIS 0.25",
+  "name": "0.12mm Structural @Prusa XL 0.25",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -62,6 +62,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0",
   "compatible_printers": [
-    "Prusa XLIS 0.25 nozzle"
+    "Prusa XL 0.25 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.12mm Structural @XLIS 0.3.json b/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 0.3.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.12mm Structural @XLIS 0.3.json
rename to resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 0.3.json
index 031cc6b542c..ccb7d0fb73a 100644
--- a/resources/profiles/Prusa/process/0.12mm Structural @XLIS 0.3.json	
+++ b/resources/profiles/Prusa/process/0.12mm Structural @Prusa XL 0.3.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.12mm Structural @XLIS 0.3",
+  "name": "0.12mm Structural @Prusa XL 0.3",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -62,6 +62,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0",
   "compatible_printers": [
-    "Prusa XLIS 0.3 nozzle"
+    "Prusa XL 0.3 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.15mm Speed @XLIS 0.25.json b/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 0.25.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.15mm Speed @XLIS 0.25.json
rename to resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 0.25.json
index 096d0b519ed..c267c2fa289 100644
--- a/resources/profiles/Prusa/process/0.15mm Speed @XLIS 0.25.json	
+++ b/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 0.25.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.15mm Speed @XLIS 0.25",
+  "name": "0.15mm Speed @Prusa XL 0.25",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -62,6 +62,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0",
   "compatible_printers": [
-    "Prusa XLIS 0.25 nozzle"
+    "Prusa XL 0.25 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.15mm Speed @XLIS 0.4.json b/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 0.4.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.15mm Speed @XLIS 0.4.json
rename to resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 0.4.json
index 5bbc4c9de25..d73fd44ca19 100644
--- a/resources/profiles/Prusa/process/0.15mm Speed @XLIS 0.4.json	
+++ b/resources/profiles/Prusa/process/0.15mm Speed @Prusa XL 0.4.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.15mm Speed @XLIS 0.4",
+  "name": "0.15mm Speed @Prusa XL 0.4",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -62,6 +62,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.4 nozzle"
+    "Prusa XL 0.4 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.25.json b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.25.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.25.json
rename to resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.25.json
index b8fb3b80561..8395f8f596d 100644
--- a/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.25.json	
+++ b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.25.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.15mm Structural @XLIS 0.25",
+  "name": "0.15mm Structural @Prusa XL 0.25",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -62,6 +62,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0",
   "compatible_printers": [
-    "Prusa XLIS 0.25 nozzle"
+    "Prusa XL 0.25 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.4.json b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.4.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.4.json
rename to resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.4.json
index 7765edab68c..e4194b3a538 100644
--- a/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.4.json	
+++ b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.4.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.15mm Structural @XLIS 0.4",
+  "name": "0.15mm Structural @Prusa XL 0.4",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -62,6 +62,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.4 nozzle"
+    "Prusa XL 0.4 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.5.json b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.5.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.5.json
rename to resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.5.json
index 31dc846f89d..e32188d18f8 100644
--- a/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.5.json	
+++ b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.5.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.15mm Structural @XLIS 0.5",
+  "name": "0.15mm Structural @Prusa XL 0.5",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -63,6 +63,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.5 nozzle"
+    "Prusa XL 0.5 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.6.json b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.6.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.6.json
rename to resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.6.json
index eea2afc6240..912270b547c 100644
--- a/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.6.json	
+++ b/resources/profiles/Prusa/process/0.15mm Structural @Prusa XL 0.6.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.15mm Structural @XLIS 0.6",
+  "name": "0.15mm Structural @Prusa XL 0.6",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -64,6 +64,6 @@
   "resolution": "0.0125",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.6 nozzle"
+    "Prusa XL 0.6 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.16mm Speed @XLIS 0.3.json b/resources/profiles/Prusa/process/0.16mm Speed @Prusa XL 0.3.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.16mm Speed @XLIS 0.3.json
rename to resources/profiles/Prusa/process/0.16mm Speed @Prusa XL 0.3.json
index d877ec4c045..235fa3deeb7 100644
--- a/resources/profiles/Prusa/process/0.16mm Speed @XLIS 0.3.json	
+++ b/resources/profiles/Prusa/process/0.16mm Speed @Prusa XL 0.3.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.16mm Speed @XLIS 0.3",
+  "name": "0.16mm Speed @Prusa XL 0.3",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -62,6 +62,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0",
   "compatible_printers": [
-    "Prusa XLIS 0.3 nozzle"
+    "Prusa XL 0.3 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.16mm Structural @XLIS 0.3.json b/resources/profiles/Prusa/process/0.16mm Structural @Prusa XL 0.3.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.16mm Structural @XLIS 0.3.json
rename to resources/profiles/Prusa/process/0.16mm Structural @Prusa XL 0.3.json
index 5d14e31d910..b27221145e9 100644
--- a/resources/profiles/Prusa/process/0.16mm Structural @XLIS 0.3.json	
+++ b/resources/profiles/Prusa/process/0.16mm Structural @Prusa XL 0.3.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.16mm Structural @XLIS 0.3",
+  "name": "0.16mm Structural @Prusa XL 0.3",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -62,6 +62,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0",
   "compatible_printers": [
-    "Prusa XLIS 0.3 nozzle"
+    "Prusa XL 0.3 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.3.json b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.3.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.3.json
rename to resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.3.json
index ce32faf2c29..c8f4d1c288d 100644
--- a/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.3.json	
+++ b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.3.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.20mm Speed @XLIS 0.3",
+  "name": "0.20mm Speed @Prusa XL 0.3",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -62,6 +62,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0",
   "compatible_printers": [
-    "Prusa XLIS 0.3 nozzle"
+    "Prusa XL 0.3 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.4.json b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.4.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.4.json
rename to resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.4.json
index 3433844d316..214c125a8d9 100644
--- a/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.4.json	
+++ b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.4.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.20mm Speed @XLIS 0.4",
+  "name": "0.20mm Speed @Prusa XL 0.4",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -62,6 +62,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.4 nozzle"
+    "Prusa XL 0.4 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.5.json b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.5.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.5.json
rename to resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.5.json
index 722cbe2eb41..469f93b422f 100644
--- a/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.5.json	
+++ b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.5.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.20mm Speed @XLIS 0.5",
+  "name": "0.20mm Speed @Prusa XL 0.5",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -63,6 +63,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.5 nozzle"
+    "Prusa XL 0.5 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.6.json b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.6.json
similarity index 97%
rename from resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.6.json
rename to resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.6.json
index 7be3e197296..4a9ff4d9e83 100644
--- a/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.6.json	
+++ b/resources/profiles/Prusa/process/0.20mm Speed @Prusa XL 0.6.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.20mm Speed @XLIS 0.6",
+  "name": "0.20mm Speed @Prusa XL 0.6",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -64,6 +64,6 @@
   "resolution": "0.0125",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.6 nozzle"
+    "Prusa XL 0.6 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm Structural @XLIS 0.4.json b/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.4.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.20mm Structural @XLIS 0.4.json
rename to resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.4.json
index 2e395bcdb69..6b94db2fde7 100644
--- a/resources/profiles/Prusa/process/0.20mm Structural @XLIS 0.4.json	
+++ b/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.4.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.20mm Structural @XLIS 0.4",
+  "name": "0.20mm Structural @Prusa XL 0.4",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -62,6 +62,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.4 nozzle"
+    "Prusa XL 0.4 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm Structural @XLIS 0.5.json b/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.5.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.20mm Structural @XLIS 0.5.json
rename to resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.5.json
index 16bcfe597a6..d12f979788b 100644
--- a/resources/profiles/Prusa/process/0.20mm Structural @XLIS 0.5.json	
+++ b/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.5.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.20mm Structural @XLIS 0.5",
+  "name": "0.20mm Structural @Prusa XL 0.5",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -63,6 +63,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.5 nozzle"
+    "Prusa XL 0.5 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm Structural @XLIS 0.6.json b/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.6.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.20mm Structural @XLIS 0.6.json
rename to resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.6.json
index 9fb59ef780b..bd9ad1e9dc1 100644
--- a/resources/profiles/Prusa/process/0.20mm Structural @XLIS 0.6.json	
+++ b/resources/profiles/Prusa/process/0.20mm Structural @Prusa XL 0.6.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.20mm Structural @XLIS 0.6",
+  "name": "0.20mm Structural @Prusa XL 0.6",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -64,6 +64,6 @@
   "resolution": "0.0125",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.6 nozzle"
+    "Prusa XL 0.6 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.25mm Speed @XLIS 0.5.json b/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 0.5.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.25mm Speed @XLIS 0.5.json
rename to resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 0.5.json
index 888572af3b1..6bdd86ca3f2 100644
--- a/resources/profiles/Prusa/process/0.25mm Speed @XLIS 0.5.json	
+++ b/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 0.5.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.25mm Speed @XLIS 0.5",
+  "name": "0.25mm Speed @Prusa XL 0.5",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -63,6 +63,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.5 nozzle"
+    "Prusa XL 0.5 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.25mm Speed @XLIS 0.6.json b/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 0.6.json
similarity index 97%
rename from resources/profiles/Prusa/process/0.25mm Speed @XLIS 0.6.json
rename to resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 0.6.json
index 043252449ec..22654cab4ed 100644
--- a/resources/profiles/Prusa/process/0.25mm Speed @XLIS 0.6.json	
+++ b/resources/profiles/Prusa/process/0.25mm Speed @Prusa XL 0.6.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.25mm Speed @XLIS 0.6",
+  "name": "0.25mm Speed @Prusa XL 0.6",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -64,6 +64,6 @@
   "resolution": "0.0125",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.6 nozzle"
+    "Prusa XL 0.6 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.25mm Structural @XLIS 0.4.json b/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.4.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.25mm Structural @XLIS 0.4.json
rename to resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.4.json
index ea6a05029ac..2e068b2d374 100644
--- a/resources/profiles/Prusa/process/0.25mm Structural @XLIS 0.4.json	
+++ b/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.4.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.25mm Structural @XLIS 0.4",
+  "name": "0.25mm Structural @Prusa XL 0.4",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -62,6 +62,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.4 nozzle"
+    "Prusa XL 0.4 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.25mm Structural @XLIS 0.5.json b/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.5.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.25mm Structural @XLIS 0.5.json
rename to resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.5.json
index ee2883faa6a..8d52826fa88 100644
--- a/resources/profiles/Prusa/process/0.25mm Structural @XLIS 0.5.json	
+++ b/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.5.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.25mm Structural @XLIS 0.5",
+  "name": "0.25mm Structural @Prusa XL 0.5",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -63,6 +63,6 @@
   "resolution": "0.008",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.5 nozzle"
+    "Prusa XL 0.5 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.25mm Structural @XLIS 0.6.json b/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.6.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.25mm Structural @XLIS 0.6.json
rename to resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.6.json
index 017a21dc181..9091395c5d3 100644
--- a/resources/profiles/Prusa/process/0.25mm Structural @XLIS 0.6.json	
+++ b/resources/profiles/Prusa/process/0.25mm Structural @Prusa XL 0.6.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.25mm Structural @XLIS 0.6",
+  "name": "0.25mm Structural @Prusa XL 0.6",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -64,6 +64,6 @@
   "resolution": "0.0125",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.6 nozzle"
+    "Prusa XL 0.6 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.30mm Detail @XLIS 0.8.json b/resources/profiles/Prusa/process/0.30mm Detail @Prusa XL 0.8.json
similarity index 95%
rename from resources/profiles/Prusa/process/0.30mm Detail @XLIS 0.8.json
rename to resources/profiles/Prusa/process/0.30mm Detail @Prusa XL 0.8.json
index 83fe78840d7..6307ceb9c2d 100644
--- a/resources/profiles/Prusa/process/0.30mm Detail @XLIS 0.8.json	
+++ b/resources/profiles/Prusa/process/0.30mm Detail @Prusa XL 0.8.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.30mm Detail @XLIS 0.8",
+  "name": "0.30mm Detail @Prusa XL 0.8",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -15,7 +15,7 @@
   "thick_bridges": "1",
   "seam_position": "nearest",
   "sparse_infill_density": "15%",
-  "sparse_infill_pattern": "rectilinear",
+  "sparse_infill_pattern": "crosshatch",
   "infill_anchor": "2.5",
   "infill_anchor_max": "20",
   "brim_object_gap": "0.1",
@@ -66,6 +66,6 @@
   "resolution": "0.0125",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.8 nozzle"
+    "Prusa XL 0.8 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.32mm Speed @XLIS 0.6.json b/resources/profiles/Prusa/process/0.32mm Speed @Prusa XL 0.6.json
similarity index 97%
rename from resources/profiles/Prusa/process/0.32mm Speed @XLIS 0.6.json
rename to resources/profiles/Prusa/process/0.32mm Speed @Prusa XL 0.6.json
index 207b38b5049..d7ba66b9ed7 100644
--- a/resources/profiles/Prusa/process/0.32mm Speed @XLIS 0.6.json	
+++ b/resources/profiles/Prusa/process/0.32mm Speed @Prusa XL 0.6.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.32mm Speed @XLIS 0.6",
+  "name": "0.32mm Speed @Prusa XL 0.6",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -64,6 +64,6 @@
   "resolution": "0.0125",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.6 nozzle"
+    "Prusa XL 0.6 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.32mm Structural @XLIS 0.6.json b/resources/profiles/Prusa/process/0.32mm Structural @Prusa XL 0.6.json
similarity index 96%
rename from resources/profiles/Prusa/process/0.32mm Structural @XLIS 0.6.json
rename to resources/profiles/Prusa/process/0.32mm Structural @Prusa XL 0.6.json
index f9c92bcae80..38e6891060d 100644
--- a/resources/profiles/Prusa/process/0.32mm Structural @XLIS 0.6.json	
+++ b/resources/profiles/Prusa/process/0.32mm Structural @Prusa XL 0.6.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.32mm Structural @XLIS 0.6",
+  "name": "0.32mm Structural @Prusa XL 0.6",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -64,6 +64,6 @@
   "resolution": "0.0125",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.6 nozzle"
+    "Prusa XL 0.6 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.40mm Quality @XLIS 0.8.json b/resources/profiles/Prusa/process/0.40mm Quality @Prusa XL 0.8.json
similarity index 95%
rename from resources/profiles/Prusa/process/0.40mm Quality @XLIS 0.8.json
rename to resources/profiles/Prusa/process/0.40mm Quality @Prusa XL 0.8.json
index e5908f1d4a2..9788a261daf 100644
--- a/resources/profiles/Prusa/process/0.40mm Quality @XLIS 0.8.json	
+++ b/resources/profiles/Prusa/process/0.40mm Quality @Prusa XL 0.8.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.40mm Quality @XLIS 0.8",
+  "name": "0.40mm Quality @Prusa XL 0.8",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -15,7 +15,7 @@
   "thick_bridges": "1",
   "seam_position": "nearest",
   "sparse_infill_density": "15%",
-  "sparse_infill_pattern": "rectilinear",
+  "sparse_infill_pattern": "crosshatch",
   "infill_anchor": "2.5",
   "infill_anchor_max": "20",
   "brim_object_gap": "0.1",
@@ -66,6 +66,6 @@
   "resolution": "0.0125",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.8 nozzle"
+    "Prusa XL 0.8 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.55mm Draft @XLIS 0.8.json b/resources/profiles/Prusa/process/0.55mm Draft @Prusa XL 0.8.json
similarity index 95%
rename from resources/profiles/Prusa/process/0.55mm Draft @XLIS 0.8.json
rename to resources/profiles/Prusa/process/0.55mm Draft @Prusa XL 0.8.json
index 63e7aef3543..5abb705a887 100644
--- a/resources/profiles/Prusa/process/0.55mm Draft @XLIS 0.8.json	
+++ b/resources/profiles/Prusa/process/0.55mm Draft @Prusa XL 0.8.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.55mm Draft @XLIS 0.8",
+  "name": "0.55mm Draft @Prusa XL 0.8",
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_xl",
@@ -15,7 +15,7 @@
   "thick_bridges": "1",
   "seam_position": "nearest",
   "sparse_infill_density": "15%",
-  "sparse_infill_pattern": "rectilinear",
+  "sparse_infill_pattern": "crosshatch",
   "infill_anchor": "2.5",
   "infill_anchor_max": "20",
   "brim_object_gap": "0.1",
@@ -66,6 +66,6 @@
   "resolution": "0.0125",
   "elefant_foot_compensation": "0.2",
   "compatible_printers": [
-    "Prusa XLIS 0.8 nozzle"
+    "Prusa XL 0.8 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/fdm_process_common.json b/resources/profiles/Prusa/process/fdm_process_common.json
index 9c2ee56fc20..70f8582d43e 100644
--- a/resources/profiles/Prusa/process/fdm_process_common.json
+++ b/resources/profiles/Prusa/process/fdm_process_common.json
@@ -76,7 +76,7 @@
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
     "support_interface_speed": "80",
-    "support_base_pattern": "rectilinear",
+    "support_base_pattern": "default",
     "support_base_pattern_spacing": "2.5",
     "support_speed": "150",
     "support_threshold_angle": "30",
diff --git a/resources/profiles/Prusa/process/process_common_mk3.json b/resources/profiles/Prusa/process/process_common_mk3.json
index df6f34df22d..7a4b8c5d7e9 100644
--- a/resources/profiles/Prusa/process/process_common_mk3.json
+++ b/resources/profiles/Prusa/process/process_common_mk3.json
@@ -70,10 +70,10 @@
   "staggered_inner_seams": "0",
   "standby_temperature_delta": "-5",
   "support_angle": "0",
-  "support_base_pattern": "rectilinear",
+  "support_base_pattern": "default",
   "support_interface_bottom_layers": "0",
   "support_interface_loop_pattern": "0",
-  "support_interface_pattern": "rectilinear",
+  "support_interface_pattern": "auto",
   "support_interface_spacing": "0.2",
   "support_interface_top_layers": "2",
   "support_on_build_plate_only": "0",
diff --git a/resources/profiles/Prusa/process/process_common_xl.json b/resources/profiles/Prusa/process/process_common_xl.json
index 43570c21b89..f3f2a7e791a 100644
--- a/resources/profiles/Prusa/process/process_common_xl.json
+++ b/resources/profiles/Prusa/process/process_common_xl.json
@@ -15,7 +15,7 @@
   "gap_fill_target": "everywhere",
   "bottom_shell_thickness": "0.5",
   "infill_anchor_max": "12",
-  "sparse_infill_pattern": "grid",
+  "sparse_infill_pattern": "crosshatch",
   "sparse_infill_density": "15%",
   "fuzzy_skin_point_distance": "0.8",
   "fuzzy_skin_thickness": "0.3",
@@ -31,7 +31,7 @@
   "support_base_pattern_spacing": "2",
   "support_interface_top_layers": "5",
   "support_interface_bottom_layers": "0",
-  "support_interface_pattern": "rectilinear",
+  "support_interface_pattern": "auto",
   "support_interface_spacing": "0.2",
   "support_object_xy_distance": "80%",
   "tree_support_branch_angle_organic": "40",