enable timelapse and the first layer has no toolchange
jira: STUDIO-10698
Change-Id: Ia503efe4a143fe98f67cd3913b7745d74b113170
(cherry picked from commit a4388010bd289f15d57044b208a2aa2116f76332)
because of 2x nozzlechange width
jira: none
Change-Id: I3a9af777551c54b8bac273bf1f6e06c9f36673bb
(cherry picked from commit 99af2382c4a6d8d942611b4d1145b4d8872a99a8)
because [0,0] will cause the wipetower to disappear in low-layer-height models with enable smooth timelapse type.
jira: none
Change-Id: I6fe3d4128e9b284ae7660f7e0f9f8b62f74cf427
(cherry picked from commit d5b570d8dccd2b96620e0448c3657c1d21cc8844)
and use bridge flow for nozzlechange
jira: none
Change-Id: I9bda1b689d7139819607bace09354ef43d27a970
(cherry picked from commit 147e7bdb50765143074dd8111c24f8c1b61872dc)
and resolve the infinite loop during multiple material changes when printing TPU.
jira: none
Change-Id: I9d0fb142ced6ba894803fd4c9b9b665e2fa93d92
(cherry picked from commit aad1ab2090781e072053dfe16764a3e05bb57178)
and fix conflict checking when the wipe tower's brim fully encloses the model
jira: STUDIO-10237, STUDIO-10296
Change-Id: I6e2a6640c06ddb6b3af700c9048fa26434411631
(cherry picked from commit b36c41e5146168325d8b7ec966eb97f1062442a7)
and fix the nozzlechange's error cleanbox.
and fix some error in interface's nozzlechangle and toolchange.
jira: none
Change-Id: I2fd5c68d90506fcb8f01f09a8246dfb5838baef4
(cherry picked from commit 6c5b63db246a1f42e34225c5561fb8b0975da53b)
and reduce the toolchange speed if it occurs at the contact surface
jira: none
Change-Id: Ic238671366145bc7bff76d18d20c104a201a1f17
(cherry picked from commit fb9f9f41e618c5064032b85351363029307e209c)
1. Try to merge filaments before grouping
2. Set max match num for machine filamnet in match mode
jira:STUDIO-10392
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2451d838e07ee02f493fda4dc702f3d13b2ad37b
(cherry picked from commit d15fc37ff2fa048e38a0b132bb3ae525ff666fab)
and set the contact surfaces of different material types as solid,
and reduce the nozzlechange speed if it occurs at the contact surface,
and recuce the toolchange speed if it occurs at the contact surface.
jira: none
Change-Id: I884d60f4114544dfa959bd654ecc985f5fb9aac4
(cherry picked from commit ed7bfd3ff6732efe6c7e9eb96901be1db00bb3d0)
1. the nozzle change gcode use double perimeter width
2. fix the error layer height for adaptive layer height
3. limit the nozzle change speed to 50 when a bridge is detected
4. fix the error extrusion flow for filament change gcode when a bridge is detected
jira: STUDIO-10269
Change-Id: I580c618555fe19d000a56e2510a42004722c1b8b
(cherry picked from commit 5c56b43166ab32b09da31b7046efbbcbe3cbc9c8)
1. Add filament_is_support field. Format the filament type
2. Optimize machine filament info logic
jira:STUDIO-10326
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia8bfc37095339e73c98209b4e3f1e0804e511e88
(cherry picked from commit 001144400b841629439a890d46fa40a7296689ba)
of the wipe tower's outer wall to use the actual outer wall path.
jira: none
Change-Id: Ib45ecbc328c88c1abe6d9e8567f715331a3ddd37
(cherry picked from commit 0a20f1fe6d6d63cdcb13bc19fd9ae553f45b6f59)
and fix wipe error when enable timelapse and in single color
and set rib wall as default
jira: none
Change-Id: Ic365bb7ee0ee6715c9d4f4f00b4bca9fd472c61a
(cherry picked from commit 89b59f1c41e0f360457622438a09237bfa1eaa18)
and reduce the travel speed inside the wipe_tower
jira: none
Change-Id: I3b07ee62623e0cdc2f1824f0011f95776020bee1
(cherry picked from commit 1aad582e08229fad1f935e257c1335dcfdbe406c)
when enable timelapse_print without toolchange;
jira: none
Change-Id: I4c89acc70ee122c0ad504d97c003ebb4016567d1
(cherry picked from commit 6350ebf9b651a933ab8a9030da9cdf9b1608cff0)
1.Add a Trietree to match command instead of the switch sentence.
2.Support VM104 and VM109
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5f6b3d1bf87baebc0a20c2589a5138538469dfec
(cherry picked from commit 85cb4a41c2a7e42552d7b8c04864e5199ae942e9)
Only update the last group id if there really has filaments
jira:STUDIO-10108
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I646f54c0bc4817f0b64364edc52b7263d2833c3c
(cherry picked from commit c6a12c38c589e15194a13632397754338cc82c93)
1.Add automatic calculation of the wipe_tower's brim width by height；
2.modify the min_depth_per_height and the default ridwidth
jira: none
Change-Id: Idd96bc90e8e631aa8481b559e1e9fec24c6b822f
(cherry picked from commit 4dd4e9e12c02d945a0ac3fd2020f75313c5b2cc9)
1.Add sync command. Now gcode and dirrectly add time sync command
2.Add support for ceil and floor in placeholder
3.Update change filament gcode for H2D
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6dd97cbd96bae1c2751c08357ff64947876d7471
(cherry picked from commit c99fcd454c2499b0c0e3ed9402a2182c00a9bffa)
