08a72c0824
Use bridge math for the first solid infill layer above sparse infill. #240
2013-02-23 21:39:13 +01:00
3b1e921171
Slight changes to the defaults
2013-02-23 19:14:41 +01:00
0634437364
Keep the full geometries in $layer->slices, including thin walls
2013-02-23 18:21:29 +01:00
504962712b
Bugfix: when using low layer heights and support material, the contact regions were generated with a negative height. #1013
2013-02-23 17:40:38 +01:00
3eedd4bbed
Fixed regression in support material after recent flow refactoring. #1012
2013-02-23 16:08:29 +01:00
72df796185
Bugfix: failure in launching on Windows with non-ASCII characters in username. #1011
2013-02-22 18:40:00 +01:00
28638019ae
Bugfix: perimeter/infill overlap was calculated regardless of the infill extrusion width. #994
2013-02-22 18:23:23 +01:00
bec2371604
Fix regression introduced in 91bcfc8a74
2013-02-22 16:56:43 +01:00
5eade0f9e1
Don't validate the number of layers for infill combination, just limit it automatically. #993
2013-02-22 16:24:24 +01:00
91bcfc8a74
Remove $Slic3r::flow and $Slic3r::first_layer_flow
2013-02-22 16:08:11 +01:00
b9c84490b8
Get rid of most calls to $Slic3r::flow
2013-02-19 12:37:26 +01:00
6dc62d3cf2
Disable extra perimeters if fill density is zero as they wouldn't be supported by anything and would just float inside the object. infill_only_where_needed should be the method of choice for hollow objects
2013-02-19 12:37:26 +01:00
c2f04f2861
avoid overlap of single layer and multilayer fill
...
A single-layer rectilinear or honeycomb fill under a low slope
wall/ceiling or extra perimeter will stick out from under the
overhang, because those fills get extended beyond their fill_surface
boundaries to purposely overlap perimeters. This causes interference
with multil-layer fills. This commit clips the single layer fill
boundaries a bit more where they interface with multi-layer fill
boundaries, to avoid overlap.
2013-02-18 07:26:19 -08:00
9a86edc70c
account for extrusion width when clearing layers for combined infill
...
Otherwise you get extraneous fill up against sloped walls in regions
of layers that should not have fill, like in #834 .
2013-02-16 07:53:47 -08:00
c9b506fa02
New simpler and more robust implementation of infill every 'n' layers
2013-02-10 12:40:43 +01:00
cac79c0575
New option to only infill where strictly needed for supporting ceilings
2013-02-09 23:36:32 +01:00
cf8cfc1380
Bugfix: angle threshold was considered even when enforcing support
2013-02-09 21:49:00 +01:00
26a3cd5542
Refactor chained_path(), add chained_path_items() and chained_path_points()
2013-02-06 12:03:53 +01:00
e593a30fc7
Skip support material for one-layer objects
2013-02-06 10:40:08 +01:00
4f91bed904
Optimize cycling in get_layer_range()
2013-02-05 21:59:18 +01:00
73a661e6c1
shortest_path() in MotionPlanner was actually correctly named shortest_path()
2013-02-05 19:41:56 +01:00
090e3b1fe3
Rename shortest_path to chained_path, which reflects its algorithm more correctly
2013-02-05 17:27:45 +01:00
11637d527a
Bugfix: avoid-crossing-perimeters was failing on layers only containing single walls. #978
2013-02-04 19:33:30 +01:00
8efe46e58d
New option to enforce support material on a given number of layers to improve adhesion of objects with poor footprint
2013-02-04 15:48:57 +01:00
c8100ed099
Disable randomize starting points by default
2013-02-04 15:05:56 +01:00
7d08796b0a
Remove sporadic duplicate useless lines. #772
2013-02-04 14:27:23 +01:00
9222526e03
Customizable number of interface layers for support material and raft
2013-02-03 17:23:50 +01:00
acada05068
Merge branch 'raft'
2013-02-02 16:17:05 +01:00
c7b4d99d7e
Generate raft automatically even when support material is disabled
2013-02-02 16:16:43 +01:00
02c0f3658f
Use 50% density for support base flange
2013-02-02 15:37:09 +01:00
d3727a1699
Add ability to have cross-hatched rectilinear support material. #509
2013-02-02 00:14:45 +01:00
547dfb857d
Workaround for Boost clipping not being idempotent and causing lack of support material
2013-02-01 23:45:46 +01:00
eae1e7adc2
Make a solid base below support material on first layer
2013-02-01 22:13:12 +01:00
1de0169910
Multithreaded perimeter generation. #154
2013-01-31 15:44:55 +01:00
177f1a9bf0
New raft_layers option. #123
2013-01-28 14:12:01 +01:00
a016a06fa6
Merge branch 'avoid-crossing-perimeters'
...
Conflicts:
lib/Slic3r/GCode.pm
2013-01-28 10:43:58 +01:00
e8cb1f4528
Slight addition to avoid_crossing_perimeters tooltip
2013-01-28 10:42:24 +01:00
721b61e798
Require Boost::Geometry::Utils 0.06
2013-01-28 00:34:09 +01:00
2963e54d21
Use the faster polygon_multi_linestring_intersection()
2013-01-28 00:32:19 +01:00
ae201c8f41
Optimization: avoid calculating square roots if not needed
2013-01-28 00:18:55 +01:00
6cb891f2db
Use Boost::Geometry::Utils for Douglas-Peucker
2013-01-28 00:09:19 +01:00
4c8c725eec
Add a wkt() method to ExPolygon
2013-01-28 00:02:34 +01:00
ddaeaa7591
Fix last_pos shifting and add unit test
2013-01-27 13:08:13 +01:00
50526dea5a
Fix last_pos shifting and add unit test
2013-01-27 13:06:45 +01:00
ad48fdc7f9
Fix external motionplanner too
2013-01-27 12:48:16 +01:00
f1230312e3
Fixes for merge issues
2013-01-26 23:55:47 +01:00
61b164b539
Merge branch 'master' into avoid-crossing-perimeters
...
Conflicts:
lib/Slic3r/GCode.pm
lib/Slic3r/Print.pm
2013-01-26 21:45:17 +01:00
4c62c1b570
Support .gco extension too. #957
2013-01-26 21:40:20 +01:00
bc61656057
harmless misplaced semicolon
2013-01-26 09:31:28 -08:00
599d76b70b
avoid DBus related crash on Ubuntu #954
...
An undocumented feature of Net::DBus->session() is that it returns
the same connection object it creates the first time it's called for
all subsequent calls. Somehow this exposes us to a bug where unref()
is called on that object too many times, causing a segfault.
Undefining the cached object after we've used it once avoids this.
2013-01-25 12:29:44 -08:00
