* Base IS Machine
* Toggle line
* Rebase
* Intento 1
* Wiki IS
* Flavorized
* Tooltips
* Calibration using the same list
* max
* Reorder JD validation
* Refactor set input shaping
* Calibrations IS
* Default values
* Axis
* Orca comments
* Rename input_shaping_enable to input_shaping_emit
Refactor all references of the input shaping configuration option from 'input_shaping_enable' to 'input_shaping_emit' across the codebase. This improves clarity by better reflecting the option's purpose of controlling whether input shaping commands are emitted in the generated G-code.
Restore DONT EMIT FOR KLIPPER
* Refactor input shaping option toggling logic
Simplifies and consolidates the logic for toggling input shaping related options in TabPrinter::toggle_options(). Uses a loop to handle enabling/disabling lines based on GCode flavor compatibility, and refines the conditions for toggling individual options.
* Improve input shaping option toggling logic in TabPrinter
* GrayOut Emit to gcode limits for klipper
* Typo
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Typo
* Skip Y input-shaper when type is Disable
If marlin2 and disabled it will be already disabled at X.
* IS expert
Co-Authored-By: SoftFever <softfeverever@gmail.com>
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Hovering a group item (e.g. "Generic" in the filament list) now opens
its submenu correctly. The dropdown stays usable while moving the
cursor between the parent list and the submenu, and dismisses normally
when the user clicks outside.
* Fixed PrintConfig.hpp order so Repetier outputs, updated ConfigWizard to use gcode_flavor value rather than static
Add Repetier to enum values and labels
Update to add Repetier base profile to the setup wizard
Re-order gcode_flavors in PrintConfig.hpp and PrintConfig.cpp to match
Revise ConfigWizard.cpp to use gcode_flavor rather than list order
Add Repetier profiles and include in custom.json (profile disables m73 and stop emit machine limits which Repetier doesn't use)
* Fix JSON formatting in Custom.json
* Add support for pressure advance in Repetier flavor
* Add Repetier flavor show motion ability tab is visible
* Refactor jerk handling for Repetier flavor
* Update resources/profiles/Custom/machine/MyRepetier 0.4 nozzle.json
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update resources/profiles/Custom/machine/fdm_repetier_common.json
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* add back localisation flag for Klipper
* tidy up indentation and braces
* Space indentation for Repetier profiles changed to tab
* Fix space indentation in Custom.json file for Repetier profiles
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Warn for first and other layers big temperature delta
Warn user if temperature differences (first layer vs other layers) for nozzle and plates are above a certain delta.
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Fix support interface semantics and gap handling
Fix zero-gap interface detection and gap initialization for supports and raft.
Ensures correct top/bottom contact semantics and avoids relying on default zero gaps.
* Additional fixes and robustness improvements
Fix incorrect coupling between top and bottom support interface spacing and density, ensuring bottom interfaces use their own parameters for smoothing and toolpath generation.
Restore correct bottom interface generation for organic (tree) supports when a non-zero bottom Z gap is used, and preserve contacts even when base polygons are empty.
Improve robustness of organic support slicing by fixing layer index drift and guarding against degenerate polygon boolean operations.
* Typo and semantics fix
differnt_support_interface_filament -> different_support_interface_filament
soluble -> zero_top_z_gap
* Fix non organic tree bottom support interface generation
Slim tree bottom interface layer numbers were capped by the object's layer number beneath it.
Fixed by refactoring the generation algorithm.
* Fix non organic tree interlaced support generation
Deterministic local interlaced support layers generation for non-organic tree support
* Enable support interface multimaterial for non organic tree
Enables mixed-material support interface behavior for non organic tree support type.
* Fix tree support interface layer counts and contact handling
- Correct non‑organic tree top interface layer budgeting so gaps don’t consume a layer (N stays N).
- Remove the extra roof interface pass that was duplicating the 2nd layer.
- Organic tree: use only the lowest contact footprint and avoid extra bottom‑contact extrusion so interface count matches the user setting.
* Bugfixes (a lot)
Many, many bugs fixed, majority edge-case but still not playing by the rule.
Some of them:
- on multilevel base, on very small level variations the support was capped to the topmost level height
- non-organic tree had gaps for supports in a multilevel base situiation
- independent support layer height had issues with support interfaces (base support beneath bottom interface, top contact layer sometimes missing)
- organic tree had issues with small variation multi-level base
- organic tree support with zero top Z distance could overlap support-material and interface-material paths when separate materials were used
- many, many others (I lost track of them)
Fix "Jump to" links opening wrong preset type
Fixes an issue where notification "Jump to" links always assumed the target setting belongs to the Print preset.
Resolve the correct preset type for each option before jumping to it, and only switch to object settings when the target is a Print preset.
Result: links now correctly open the intended setting across all preset types.
* Make filament compatibility temperature-aware
Extend filament compatibility checks to consider actual nozzle temperatures and temperature ranges.
Print::check_multi_filaments_compatibility now accepts nozzle temperatures and range lows/highs; it resolves missing ranges from material defaults, computes per-filament effective temperatures, and checks pairwise compatibility (including high/low/mid mixed cases).
Updated callers in Print::check_multi_filament_valid and CalibrationWizardPresetPage to pass nozzle settings, consolidated user-facing warning strings, and fixed extruder index handling and minor logic/path improvements.
Clarify incompatible nozzle temperature warnings
* Update Print.cpp
* Remove json usage
* Reduce messages
* Clean up code
* Filament mapping select ext slot automatically when no AMS filament inserted (OrcaSlicer/OrcaSlicer#13103)
* Show warning if external filament type does not match the one in sliced file
* Add safety checks and add logic to avoid creating degenerate polygons in contour_extrusion_path
* fix comment
* fix(zaa): cast from slice_z upward only, guard normal on miss
* remove old code
---------
Co-authored-by: Aleksandr Dobkin <alex@dobk.in>
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* fix: manual filament change not emitting MANUAL_TOOL_CHANGE for BBL printers
BBL-specific M1020 S handling in toolchange() bypassed toolchange_prefix(),so manual_filament_change had no effect — M1020 was always emitted regardless of the setting. Move the BBL logic into toolchange_prefix() so all callers respect the option consistently.
Fixes#11795
* add comment
Fix extrusion of some support layers at wrong Z height
Fixes the issue that PR #12736 (github.com/OrcaSlicer/OrcaSlicer/pull/12736) reverted the changes of PR #13327 (github.com/OrcaSlicer/OrcaSlicer/pull/13327)
This PR supersedes #12225, which originally proposed this feature but
appears inactive.
The feature originated from work I developed earlier in
[BambuStudio-ZAA](https://github.com/adob/BambuStudio-ZAA), a private
fork of Bambu Studio
Compared to #12225, I updated the implementation for current upstream
and fixed the following issues:
- fixed broken tests
- removed references to nonplanar directory
Reviewers may want to compare against #12225 for earlier
discussion/context.
## Summary
Port of **Z Anti-Aliasing (ZAA)** from
[BambuStudio-ZAA](https://github.com/adob/BambuStudio-ZAA) to
OrcaSlicer.
ZAA eliminates visible stair-stepping on curved and sloped top surfaces
by raycasting each extrusion point against the original 3D mesh and
micro-adjusting its Z height to follow the actual surface geometry. The
result is visibly smoother domes, chamfers, and shallow slopes — without
post-processing.
## How It Works
1. The slicer runs normally, then a **posContouring** step processes
each layer
2. `ContourZ.cpp` raycasts every extrusion point vertically against the
source mesh
3. Each point's Z is adjusted to the mesh intersection, converting flat
`Polyline` paths into `Polyline3` paths with per-point Z coordinates
4. The G-code writer emits the adjusted Z values, so the printer follows
the true surface
## Configuration
Five new settings under **Print Settings > Quality**:
| Setting | Type | Default | Description |
|---------|------|---------|-------------|
| `zaa_enabled` | bool | off | Master enable/disable switch |
| `zaa_min_z` | float | 0.06 mm | Minimum Z layer height; controls
slicing plane offset |
| `zaa_minimize_perimeter_height` | float | 35° | Reduce perimeter
heights on slopes below this angle (0 = disabled) |
| `zaa_dont_alternate_fill_direction` | bool | off | Keep fill direction
consistent instead of alternating |
| `zaa_region_disable` | bool | off | Disable ZAA for a specific print
region/material |
## Key Changes
- **Core algorithm**: New `src/libslic3r/ContourZ.cpp` (~330 lines) —
raycasting engine
- **3D geometry**: `Point3`, `Line3`, `Polyline3`, `MultiPoint3` extend
existing 2D types
- **Arc fitting**: Templated to work with both 2D and 3D geometry
- **Pipeline**: `ExtrusionPath::polyline` changed from `Polyline` to
`Polyline3`; new `posContouring` step in `PrintObject.cpp`
- **G-code**: `GCode.cpp` writes per-point Z when `path.z_contoured` is
set
- **UI**: ZAA settings exposed in Print Settings > Quality panel
- **Documentation**: `docs/ZAA.md` with usage and implementation details
57 files changed, ~1800 insertions, ~200 deletions.
## Test Plan
- [ ] Load a model with curved top surfaces (sphere, dome, chamfered
box)
- [ ] Enable **Z contouring** in Print Settings > Quality
- [ ] Slice and verify G-code has varying Z values within contoured
layers
- [ ] Build on macOS (verified), test on Linux and Windows
