1. Use the minimum flush between nozzle volume and flush in datalist
2. Add a new param to decide the datalist to use
github:7445
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id87c98ca5069e7b328974d641d7a81dfbf9c50a0
(cherry picked from commit 2be29b784727330732170b5c2ff0ba9d5e79d82f)
when switch printer, we found some filament preset not visible
and we need to allow it to be selected
jira: STUDIO-9979
Change-Id: I9613747a755f449c2f48563082b6893e426f37ea
(cherry picked from commit bc5514bbabbbaddefb33ade556a0f15c051aed7e)
and fix wipe error when enable timelapse and in single color
and set rib wall as default
jira: none
Change-Id: Ic365bb7ee0ee6715c9d4f4f00b4bca9fd472c61a
(cherry picked from commit 89b59f1c41e0f360457622438a09237bfa1eaa18)
* refactor Infill rotation template
* clean up comments
* set default solid_infill_rotate_template to empty
* Fix an issue that infill_direction solid_infill_direction not working as expected
* Add Extra Solid Infill Feature
Introduced a new feature to insert extra solid infills at specific layers for enhanced strength in 3D prints.
* fix doc error
* fix image name
* support "#K" for Explicit Layer List
* update wiki
and modify the min_depth_per_height
jira: none
Change-Id: I4860df661b4dd1f66677112d14e60560bc4a73be
(cherry picked from commit 00810d685d01a91b5373f3315413aaef1fe49cbc)
to support different printable height of multi_extruder
jira:none
Change-Id: I265c65e15fc8f598c3456556557bb6977b5de820
(cherry picked from commit 933adbaaf0eaf361e39f131dd5536dca91214d43)
1. also remove original nozzle_volume_type from printer
and move into project config
2. support save nozzle_volume_type into appconfig
and load from it at beginning or printer switch
jira: no-jira
Change-Id: I01fc82d142fc633fc59a238796a71b9f8d180efb
(cherry picked from commit fe8b904e7551cde83b1ead75922e9b60278b50ad)
1. always resize filament count when not matched in full_fff_print
2. remove no-use codes in Preset::normalize
jira: no-jira
Change-Id: Ie15a5977d28f28e0f63ba84f27f98f77d16665c0
(cherry picked from commit f122c4f4ef6f476c4e8190a0872e566d690d6c25)
1.During the filament change, the extruder will extrude an extra length
of grap_length for the corresponding detection, so the purge volume can
reduce this length.
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I14f55a3200c1dd48b1603e50280d0c29e1319ebe
(cherry picked from commit 16cadec565f987e6baae97428d5392c1f8e7ad39)
* Add some new non-overlapping functions for rotation surfaces/infills
I can't post the entire package of changes yet, but this is just the beginning. These features do not affect the latest changes to the pattern rotation system. They are merely adding new functionality.
* Added relative rotation of the infill according to the template.
* Update PrintConfig.cpp
* Update PrintConfig.cpp
* Update PrintConfig.cpp
* Add height limitation
* Both sparse and solid. +one-time instructions
* implementation v3
need for clean code in future
* + Multiply Instructions
* Add solid layers into sparse infill
* Update Layer.hpp
* Update PrintObject.cpp
* Update Tab.cpp
* Remove some bugs and increase quality
* rename apply_model_direction to align_infill_direction_to_model
* Change the data type of top_surface_direction and bottom_surface_direction to float so that they are consistent with other infill direction parameters.
* remove top_surface_direction and bottom surface_direction options
* clean code
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Feature: Fuzzy Skin Extrusion Mode
This extension allows you to add new features to the fuzzy skin generator.
* Add auto switch to Arachne mode
* Move dialog to `update_print_fff_config` and update how `is_msg_dlg_already_exist` is used
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
