f33f55646c
Bumped up version to 0.0.4
2020-11-09 11:43:02 +01:00
71593a487f
Merge pull request #5104 from Tillverka3d/master
...
Fix predator output filaname format, infill overlap, and retraction length
2020-11-09 11:39:39 +01:00
8f07c5b5cc
Merge pull request #5110 from pmjdebruijn/creality_filament_3
...
Creality Filament 3
2020-11-09 10:44:15 +01:00
479d4b70f2
GCode Viewer - Show print/printer/filament settings names in legend
2020-11-09 08:41:14 +01:00
72bcd29bc7
creality.ini: add filament_colour per vendor
...
this essentially associates filament_colour with a vendor
the colour codes were taking from each of the vendors websites
2020-11-08 19:36:36 +01:00
3b63b0eca0
creality.ini: lower Creality PLA temp
...
Based on test-dog.gcode on the SD card included with the Enter 3 Pro
M190 S50.000000
M109 S200.000000
I also did a temperature tower test with the sample filament spool included
with my Ender 3 Pro, which I still hadn't opened.
And at all temps 190-215C I've seen fairly poor bridging, with 190C being the
least worst. I still have to test, but it'll likely perform well at 185C.
The semitranslucent white PLA included with my Ender 3 Pro, probably has a
matting agent in it, which explains why it's very flowy, and very similar
in performance to another Matte PLA filament I have, which also exhibits
poor bridging at even moderate temperatures.
For the time being, let's stick with Creality's own sample settings.
2020-11-08 19:17:24 +01:00
1025e01a9d
creality.ini: slightly raise temp for Generic PLA
2020-11-08 19:14:17 +01:00
39c5a5cc12
creality.ini: Add AzureFilm PLA filament
...
Based on temperature tower
2020-11-08 19:13:12 +01:00
f843e1034d
Revert retract_lenght for Predator until further testing
2020-11-08 17:07:42 +01:00
3a0b0913e3
Fix retraction lenght for predator
2020-11-07 23:50:59 +01:00
c518ec8abd
Fix predator output filaname format and infill overlap
2020-11-07 22:20:01 +01:00
517477f0dd
Fix of the previous Adaptive Cubic infill refactoring
...
plus couple of fixes of the old logic.
2020-11-06 16:24:15 +01:00
8448d1a1dc
OSX specific : Set top border for the mode buttons, when settings pages has new layouts
...
(when tabs bar is hidden)
+ Code cleaning for OG_CustomCtrl (delete unused input parameter from the draw_blinking_bmp())
2020-11-06 16:24:03 +01:00
1492bc9cd5
Localization : Next phrases corrections and update for PrusaSlicer.pot
2020-11-06 12:14:19 +01:00
8f31f404a3
Disabled tech ENABLE_CTRL_M_ON_WINDOWS
2020-11-06 11:55:57 +01:00
277376ee09
Enabled tech ENABLE_CTRL_M_ON_WINDOWS to produce an experimental build
2020-11-06 11:42:54 +01:00
f1b5142daa
Follow-up of 944e760722 -> Removed debug output line
2020-11-06 11:20:47 +01:00
41ef6cf15c
Disabled tech ENABLE_CTRL_M_ON_WINDOWS
2020-11-06 11:09:47 +01:00
411159b5e7
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-11-06 11:03:56 +01:00
944e760722
#4892 - Follow-up of 30481e1ea8 -> Fixed behavior of imgui dialog for settings of 3DConnexion devices (CTRL+M) on Windows
2020-11-06 11:03:41 +01:00
e01b3f4759
Added 0.08mm SUPERDETAIL and 0.28mm SUPERDRAFT print profiles.
2020-11-06 10:55:50 +01:00
98b7ce405c
Added 0.08mm SUPERDETAIL and 0.28mm SUPERDRAFT print profiles.
...
https://github.com/prusa3d/PrusaSlicer/pull/5092
2020-11-06 10:54:34 +01:00
2a98aa113c
Remove unused RotoptimzeWindow imgui dialog.
...
It might be added in the future in a more polished form.
2020-11-06 10:06:05 +01:00
139b58a6f2
Adaptive Cubic infill with anchors: Trimming anchors with not only
...
with a neighbor T-joint line, but also with other crossing lines.
2020-11-06 08:56:53 +01:00
a131217ada
Added missed parent for the SysInfoDialog
...
see f0a339758b
2020-11-05 22:19:48 +01:00
ed2f03ec79
Localization:
...
Some phrases are corrected in the code
The POT-file is updated
2020-11-05 22:17:49 +01:00
f0a339758b
Fixed a Dialog position under OSX
...
Always set parent for the Dialog, if we want to see the Dialog in the same display as a parent.
Dialog will be shown in the primary monitor otherwise.
+ fixed a draw of the canvas legend when we move application between Retina and non-Retina displays
2020-11-05 11:53:16 -08:00
95d808f7c4
Merge branch 'dk_filaments' into master
2020-11-05 17:44:21 +01:00
e9295e268a
config wizard printer selection - changed vertical spacing
2020-11-05 17:43:40 +01:00
239d588c5d
1) Implemented anchoring of infill lines to perimeters with length
...
limited anchors, while before a full perimeter segment was always
taken if possible.
2) Adapted the line infills (grid, stars, triangles, cubic) to 1).
This also solves a long standing issue of these infills producing
anchors for each sweep direction independently, thus possibly
overlapping and overextruding, which was quite detrimental
in narrow areas.
3) Refactored cubic adaptive infill anchroing algorithm
for performance and clarity.
2020-11-05 17:32:40 +01:00
8491872fb7
#5079 - Fixed GCode Viewer changing files modified date on Windows
2020-11-05 14:02:43 +01:00
6d56e60091
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-11-05 11:02:08 +01:00
aea09b8347
#5072 - Added color icon into 'Print' items in legend for gcode color print visualization
2020-11-05 11:01:54 +01:00
2ec5a0d46c
Fixed visualization of gcode toolpaths for spiral vase mode
2020-11-05 11:00:04 +01:00
3da92257d2
Anycubic 0.0.3
2020-11-05 10:42:08 +01:00
94c54d0538
Bumped up version to 0.0.3
2020-11-05 10:40:35 +01:00
8f2812dd3b
Merge pull request #5086 from Tillverka3d/master
...
fix infill_overlap, start_gcode, end_gcode for anycubic predator
2020-11-05 10:39:28 +01:00
69fd5c1074
fix infill_overlap, start_gcode, end_gcode for anycubic predator
2020-11-05 03:24:51 +01:00
ea5fdcd7b1
Removed cog icon from the horizontal slider.
...
+ Shortcut "Shift+G" works from the Preview canvas now (not just from the focused slider as before)
2020-11-04 07:30:33 -08:00
ece27dcc42
Bumped up version number
2020-11-04 15:45:37 +01:00
5d16c5f466
imgui README.md updated
2020-11-04 13:48:30 +01:00
747fcb1d07
Follow-up of d2e5be89e3 -> Fixed processing of color print, pause print and custom gcode tags
2020-11-04 13:33:27 +01:00
11ee0cc2cc
Hot-fix for my last commit ( d576c029bd)
2020-11-04 13:14:57 +01:00
ab6af3ff68
Fix of #5058 (failing build with wx3.0)
2020-11-04 11:58:45 +01:00
d576c029bd
CustomCtrl : fixed correction of the CustomCtrl's line height in respect to the height of the inside controls (fields or widgets)
...
Issue was appeared on the Ubuntu 20.04
2020-11-04 10:17:32 +01:00
3ca3a544a8
New Export Finished notification showing path and opening containing folder. Fix of #4917 . Fixed wrongly grayed eject button in File menu. Hopefully fix of ctrl shortcut of tooltips at sidebar.
2020-11-04 09:29:08 +01:00
729304c129
Creality - Prusament PLA temp adjust
2020-11-03 22:15:39 +01:00
f623aaa07e
Merge pull request #5070 from pmjdebruijn/creality_filament_2
...
Creality filament 2
2020-11-03 22:09:43 +01:00
893475d7ed
creality.ini: fix first_layer_bed_temperature for Generic PLA
2020-11-03 19:39:45 +01:00
f119bc9872
creality.ini: optimize Generic PLA
...
with some exceptions most regular PLAs seem to print well
around 200C, which is most likely due to the limited
effectiveness of the part cooling fan design on most
Creality printers
2020-11-03 19:32:00 +01:00
