igiannakas
3d60a907b2
Detection of curled edges to enhance slowdown for overhangs algorithm ( #2056 )
...
* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
---------
Co-authored-by: SoftFever <softfeverever@gmail.com >
2023-09-16 22:24:18 +08:00
SoftFever
bbe6610f8e
handle edge cases when Cooling tube position is 0
2023-09-12 20:12:54 +08:00
Noisyfox
4808a13b71
Fix GCode viewer first layer height in vase mode ( #2051 )
...
Follow-up of 6be84d529d740c44c1e9bf533e70e167b3442063 - Fixed processing of spiral vase mode in GCodeProcessor::process_G1
Co-authored-by: enricoturri1966 <enricoturri@seznam.cz >
2023-09-10 11:38:37 +08:00
SoftFever
60f3811ad7
Merge branch 'purge_tower'
2023-09-09 13:20:32 +08:00
SoftFever
8325a897ee
semm
2023-09-09 13:19:59 +08:00
Lukas Matena
c9a7edebf7
Wipe tower: changed the way how initial wipe tower preview depth is calculated
2023-09-09 13:19:43 +08:00
SoftFever
0d3249007a
wip
2023-09-09 13:19:43 +08:00
SoftFever
a9839c78ff
Properly pasrse toolchange
2023-09-09 13:14:10 +08:00
SoftFever
cf72362fff
Support Marlin 2
2023-08-30 23:39:00 +08:00
SoftFever
ce5f288430
post changes after merging BS1.7.4
...
Remove tracking etc..
2023-08-26 18:45:43 +08:00
SoftFever
6e032175c5
Merge remote-tracking branch 'BS/v1.7.2'
...
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com >
# Conflicts:
# .github/ISSUE_TEMPLATE/bug_report.md
# .github/workflows/build_ubuntu.yml
# .gitignore
# Containerfile
# Dockerfile
# README.md
# deps/Boost/Boost.cmake
# deps/OpenEXR/OpenEXR.cmake
# deps/OpenVDB/OpenVDB.cmake
# doc/How to build - Mac OS.md
# localization/i18n/OrcaSlicer.pot
# localization/i18n/de/OrcaSlicer_de.po
# localization/i18n/en/OrcaSlicer_en.po
# localization/i18n/es/OrcaSlicer_es.po
# localization/i18n/fr/OrcaSlicer_fr.po
# localization/i18n/hu/OrcaSlicer_hu.po
# localization/i18n/it/OrcaSlicer_it.po
# localization/i18n/ja/OrcaSlicer_ja.po
# localization/i18n/list.txt
# localization/i18n/nl/OrcaSlicer_nl.po
# localization/i18n/sv/OrcaSlicer_sv.po
# localization/i18n/zh_cn/OrcaSlicer_zh_CN.po
# resources/i18n/de/BambuStudio.mo
# resources/i18n/en/BambuStudio.mo
# resources/i18n/es/BambuStudio.mo
# resources/i18n/fr/BambuStudio.mo
# resources/i18n/hu/BambuStudio.mo
# resources/i18n/it/BambuStudio.mo
# resources/i18n/ja/BambuStudio.mo
# resources/i18n/nl/BambuStudio.mo
# resources/i18n/sv/BambuStudio.mo
# resources/i18n/zh_cn/BambuStudio.mo
# resources/images/im_all_plates_stats.svg
# resources/profiles/Anker.json
# resources/profiles/Anker/filament/Generic ASA @Anker.json
# resources/profiles/Anker/filament/Generic PA @Anker.json
# resources/profiles/Anker/filament/Generic PA-CF @Anker.json
# resources/profiles/Anker/filament/Generic PC @Anker.json
# resources/profiles/Anker/filament/Generic PETG @Anker.json
# resources/profiles/Anker/filament/Generic PLA-CF @Anker.json
# resources/profiles/Anker/filament/Generic PVA @Anker.json
# resources/profiles/Anker/filament/Generic TPU @Anker.json
# resources/profiles/Anker/machine/Anker M5 0.4 nozzle.json
# resources/profiles/Anker/machine/Anker M5.json
# resources/profiles/Anker/machine/Anker M5C 0.4 nozzle.json
# resources/profiles/Anker/machine/Anker M5C.json
# resources/profiles/Anker/machine/fdm_machine_common.json
# resources/profiles/Anker/process/0.05mm Ultradetail @Anker.json
# resources/profiles/Anker/process/0.15mm Fast @Anker.json
# resources/profiles/Anker/process/0.20mm Fast @Anker.json
# resources/profiles/Anker/process/0.20mm Standard @Anker.json
# resources/profiles/Anker/process/0.25mm Fast @Anker.json
# resources/profiles/Anker/process/fdm_process_common.json
# resources/profiles/Anycubic.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro 2 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro 2.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro.json
# resources/profiles/Anycubic/machine/Anycubic Chiron 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Chiron.json
# resources/profiles/Anycubic/machine/Anycubic Kobra 2 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Kobra Max 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Kobra Max.json
# resources/profiles/Anycubic/machine/Anycubic Vyper 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Vyper.json
# resources/profiles/Anycubic/machine/Anycubic i3 Mega S 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic i3 Mega S.json
# resources/profiles/Anycubic/machine/fdm_machine_common.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json
# resources/profiles/Anycubic/process/fdm_process_common.json
# resources/profiles/BBL.json
# resources/profiles/BBL/process/fdm_process_bbl_common.json
# resources/profiles/Creality.json
# resources/profiles/Creality/filament/fdm_filament_abs.json
# resources/profiles/Creality/filament/fdm_filament_pla.json
# resources/profiles/Creality/machine/Creality CR-10 Max 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality CR-10 Max.json
# resources/profiles/Creality/machine/Creality CR-10 V2 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality CR-10 V2.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 Pro 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 Pro.json
# resources/profiles/Creality/machine/Creality Ender-3 S1.json
# resources/profiles/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 V2.json
# resources/profiles/Creality/machine/Creality Ender-5 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 Plus.json
# resources/profiles/Creality/machine/Creality Ender-5 S1 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 S1.json
# resources/profiles/Creality/machine/Creality Ender-5.json
# resources/profiles/Creality/machine/Creality Ender-5S 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5S.json
# resources/profiles/Creality/machine/Creality Ender-6 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-6.json
# resources/profiles/Creality/machine/fdm_creality_common.json
# resources/profiles/Creality/machine/fdm_machine_common.json
# resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json
# resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json
# resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json
# resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json
# resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json
# resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json
# resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json
# resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json
# resources/profiles/Creality/process/0.24mm Draft @Creality.json
# resources/profiles/Creality/process/fdm_process_creality_common.json
# resources/profiles/Custom/filament/My Generic PETG.json
# resources/profiles/Custom/filament/My Generic PLA.json
# resources/profiles/Elegoo.json
# resources/profiles/Elegoo/filament/fdm_filament_common.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2D 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2D.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2S 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2S.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Max 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Max.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Plus 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Plus.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Pro 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Pro.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3.json
# resources/profiles/Elegoo/machine/Elegoo Neptune X 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune X.json
# resources/profiles/Elegoo/machine/Elegoo Neptune.json
# resources/profiles/Elegoo/machine/fdm_machine_common.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo NeptuneX.json
# resources/profiles/Prusa.json
# resources/profiles/Prusa/filament/fdm_filament_common.json
# resources/profiles/Prusa/machine/Prusa MINI 0.4 nozzle.json
# resources/profiles/Prusa/machine/Prusa MINI.json
# resources/profiles/Prusa/machine/Prusa MK3S 0.4 nozzle.json
# resources/profiles/Prusa/machine/Prusa MK3S.json
# resources/profiles/Prusa/machine/fdm_machine_common.json
# resources/profiles/Prusa/process/0.20mm Standard @MINI.json
# resources/profiles/Prusa/process/0.20mm Standard @MK3S.json
# resources/profiles/Qidi.json
# resources/profiles/Qidi/filament/fdm_filament_abs.json
# resources/profiles/Qidi/filament/fdm_filament_asa.json
# resources/profiles/Qidi/filament/fdm_filament_common.json
# resources/profiles/Qidi/filament/fdm_filament_pa.json
# resources/profiles/Qidi/filament/fdm_filament_pc.json
# resources/profiles/Qidi/filament/fdm_filament_pet.json
# resources/profiles/Qidi/filament/fdm_filament_pla.json
# resources/profiles/Qidi/filament/fdm_filament_pva.json
# resources/profiles/Qidi/filament/fdm_filament_tpu.json
# resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-CF Pro.json
# resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Max 3.json
# resources/profiles/Qidi/machine/Qidi X-Max.json
# resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Plus 3.json
# resources/profiles/Qidi/machine/Qidi X-Plus.json
# resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Smart 3.json
# resources/profiles/Qidi/machine/fdm_machine_common.json
# resources/profiles/Qidi/machine/fdm_qidi_common.json
# resources/profiles/Qidi/machine/fdm_qidi_x3_common.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax3.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax3.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax3.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json
# resources/profiles/Qidi/process/fdm_process_common.json
# resources/profiles/Qidi/process/fdm_process_qidi_common.json
# resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json
# resources/profiles/Tronxy/filament/Tronxy Generic ABS.json
# resources/profiles/Tronxy/process/0.12mm Fine @Tronxy.json
# resources/profiles/Tronxy/process/0.15mm Optimal @Tronxy.json
# resources/profiles/Tronxy/process/0.20mm Standard @Tronxy.json
# resources/profiles/Tronxy/process/0.24mm Draft @Tronxy.json
# resources/profiles/Voron.json
# resources/profiles/Voron/filament/Generic ABS @Voron.json
# resources/profiles/Voron/filament/Generic ASA @Voron.json
# resources/profiles/Voron/filament/Generic PA @Voron.json
# resources/profiles/Voron/filament/Generic PETG @Voron.json
# resources/profiles/Voron/filament/Generic PVA @Voron.json
# resources/profiles/Voron/filament/Voron Generic PA-CF.json
# resources/profiles/Voron/filament/Voron Generic PC.json
# resources/profiles/Voron/filament/Voron Generic PLA-CF.json
# resources/profiles/Voron/filament/Voron Generic PLA.json
# resources/profiles/Voron/filament/Voron Generic TPU.json
# resources/profiles/Voron/machine/Voron 0.1.json
# resources/profiles/Voron/machine/Voron 2.4 250.json
# resources/profiles/Voron/machine/Voron 2.4 300.json
# resources/profiles/Voron/machine/Voron 2.4 350.json
# resources/profiles/Voron/machine/Voron Trident 250.json
# resources/profiles/Voron/machine/Voron Trident 300.json
# resources/profiles/Voron/machine/Voron Trident 350.json
# resources/profiles/Voron/process/fdm_process_voron_common.json
# resources/profiles/Voxelab.json
# resources/profiles/Voxelab/filament/Generic ABS @Voxelab.json
# resources/profiles/Voxelab/filament/Generic PLA @Voxelab.json
# resources/profiles/Voxelab/filament/fdm_filament_common.json
# resources/profiles/Voxelab/machine/Voxelab Aquila X2 0.4 nozzle.json
# resources/profiles/Voxelab/machine/Voxelab Aquila X2.json
# resources/profiles/Voxelab/machine/fdm_machine_common.json
# resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json
# resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json
# resources/web/data/text.js
# resources/web/guide/21/21.js
# resources/web/guide/24/24.js
# src/BaseException.cpp
# src/OrcaSlicer.cpp
# src/libslic3r/AppConfig.cpp
# src/libslic3r/BoundingBox.hpp
# src/libslic3r/Extruder.hpp
# src/libslic3r/Fill/Fill.cpp
# src/libslic3r/Format/bbs_3mf.cpp
# src/libslic3r/GCode.cpp
# src/libslic3r/GCode.hpp
# src/libslic3r/GCode/CoolingBuffer.cpp
# src/libslic3r/GCode/GCodeProcessor.cpp
# src/libslic3r/GCode/GCodeProcessor.hpp
# src/libslic3r/GCode/WipeTower.cpp
# src/libslic3r/GCodeWriter.cpp
# src/libslic3r/GCodeWriter.hpp
# src/libslic3r/Model.cpp
# src/libslic3r/PerimeterGenerator.cpp
# src/libslic3r/Preset.cpp
# src/libslic3r/Preset.hpp
# src/libslic3r/PresetBundle.cpp
# src/libslic3r/PresetBundle.hpp
# src/libslic3r/Print.cpp
# src/libslic3r/Print.hpp
# src/libslic3r/PrintBase.hpp
# src/libslic3r/PrintConfig.cpp
# src/libslic3r/PrintConfig.hpp
# src/libslic3r/PrintObject.cpp
# src/libslic3r/TreeSupport.cpp
# src/libslic3r/Utils.hpp
# src/mcut/CMakeLists.txt
# src/slic3r/CMakeLists.txt
# src/slic3r/GUI/3DBed.cpp
# src/slic3r/GUI/AMSMaterialsSetting.cpp
# src/slic3r/GUI/AMSMaterialsSetting.hpp
# src/slic3r/GUI/BBLTopbar.cpp
# src/slic3r/GUI/BBLTopbar.hpp
# src/slic3r/GUI/BackgroundSlicingProcess.hpp
# src/slic3r/GUI/BindDialog.cpp
# src/slic3r/GUI/ConfigManipulation.cpp
# src/slic3r/GUI/DeviceManager.cpp
# src/slic3r/GUI/Field.cpp
# src/slic3r/GUI/GLCanvas3D.cpp
# src/slic3r/GUI/GUI_App.cpp
# src/slic3r/GUI/GUI_App.hpp
# src/slic3r/GUI/GUI_Factories.cpp
# src/slic3r/GUI/GUI_Factories.hpp
# src/slic3r/GUI/GUI_ObjectList.cpp
# src/slic3r/GUI/Gizmos/GLGizmoMeshBoolean.cpp
# src/slic3r/GUI/Jobs/ArrangeJob.cpp
# src/slic3r/GUI/Jobs/FillBedJob.cpp
# src/slic3r/GUI/MainFrame.cpp
# src/slic3r/GUI/MediaPlayCtrl.cpp
# src/slic3r/GUI/Monitor.cpp
# src/slic3r/GUI/PartPlate.cpp
# src/slic3r/GUI/PartPlate.hpp
# src/slic3r/GUI/PlateSettingsDialog.cpp
# src/slic3r/GUI/PlateSettingsDialog.hpp
# src/slic3r/GUI/Plater.cpp
# src/slic3r/GUI/Plater.hpp
# src/slic3r/GUI/PresetComboBoxes.cpp
# src/slic3r/GUI/ReleaseNote.cpp
# src/slic3r/GUI/SelectMachine.cpp
# src/slic3r/GUI/StatusPanel.cpp
# src/slic3r/GUI/Tab.cpp
# src/slic3r/GUI/Widgets/Label.cpp
# src/slic3r/GUI/Widgets/Label.hpp
# src/slic3r/GUI/Widgets/SideButton.cpp
# src/slic3r/GUI/calib_dlg.cpp
# src/slic3r/GUI/calib_dlg.hpp
# src/slic3r/GUI/wxExtensions.hpp
# src/slic3r/Utils/NetworkAgent.cpp
# src/slic3r/Utils/bambu_networking.hpp
# version.inc
2023-08-26 16:13:57 +08:00
SoftFever
2a332e9bca
Make new overhang slowdonw(PrusaSlicer's slowdown) default again.
...
And tweak it
2023-08-22 18:34:56 +08:00
zhimin.zeng
69e1145a7a
ENH: support custom the first layer print sequence
...
Change-Id: I0516948292933fe47d39fb3ae2f7e91473b45b3a
(cherry picked from commit 5bbdb28c86509d5f94b5b9c33a0f2e1b2749e94b)
(cherry picked from commit 22c6e9f1d2c6f1b86c70827c8bec65a857fe2bc5)
2023-08-19 01:32:59 +08:00
zhimin.zeng
52483d6520
ENH: support custom the first layer print sequence
...
Change-Id: I0516948292933fe47d39fb3ae2f7e91473b45b3a
(cherry picked from commit 5bbdb28c86509d5f94b5b9c33a0f2e1b2749e94b)
(cherry picked from commit 22c6e9f1d2c6f1b86c70827c8bec65a857fe2bc5)
2023-08-15 21:39:50 +08:00
SoftFever
945ad2da9a
Fixed an issue that internal_bridge_speed is applied to external bridge infills
...
A new extrusion role - erInternalBridgeInfill is introduced.
SuperSlicer's implementation is referenced.
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com >
2023-08-12 15:38:22 +08:00
SoftFever
5dcc0ee8f3
clean up
2023-08-09 13:42:41 +08:00
SoftFever
2b729eddec
Merge some BS1.7 changes:
...
internal_solid_infill_pattern
2023-08-08 19:08:13 +08:00
SoftFever
2d036026fc
Merge some BS1.7 changes:
...
Port object canceling for BL X1 from BS.
Todo: refactor
2023-08-08 19:08:13 +08:00
SoftFever
ef3dcfb5aa
Fix set fan bug
2023-08-04 18:56:58 +08:00
xun.zhang
964df40630
ENH: remove nozzle_hrc in params page and profiles
...
use std::map to map nozzle_type to nozzle_hrc
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ie9d1db486808bd5164c7952caecaf4ac279f43d8
2023-07-31 14:29:15 +08:00
SoftFever
486043ee73
Optimized gcode generation. Reduce set fan speed commands #804
2023-07-30 00:16:09 +08:00
Jason M-H
6265b0f305
Calculate extrusion width %s as a function of nozzle width, not layer height ( #1578 )
...
* Calculate extrusion width %s as a function of nozzle width, not layer height
* handled more width conversions
* more missing percent handling
* even more missed percent handling
* even more more extrusion % handling
* some fixes
---------
Co-authored-by: SoftFever <softfeverever@gmail.com >
2023-07-27 23:37:47 +08:00
salt.wei
f4b6bbe30b
ENH: apply fan speed immediately after changing layer
...
What: As title. The original code is always apply
at the end of last object of last layer, whichi is before
layer change
Why: the fan spped will be skipped if the last object is
skipped. So we must move the layer time fan speed setting
after changing layer, where is common gcode block and does
not belong to any object.
Signed-off-by: salt.wei <salt.wei@bambulab.com >
Change-Id: I442f80e00778b524576210b451f81dd15e25e14c
2023-07-07 17:52:43 +08:00
lane.wei
1e5d3d3708
FIX: fix a typo in GCodeProcessor
...
Change-Id: I56b9eaedc3cb062d17facf7352eb469524db5b60
(cherry picked from commit 1bb3b64cfc1aabad9ece3e5d5c0f55a9cb3367c5)
2023-07-07 17:52:43 +08:00
lane.wei
728a79273d
ENH: skip_objects: optimize the label_id logic in ModelInstance
...
Change-Id: Id20fe9b084426036d6cf4f54859655579bec7197
(cherry picked from commit ebb5343eef6aea9e54d11f3d6b98cf11ff941aa5)
2023-07-07 17:52:43 +08:00
salt.wei
3c6e0fe75a
ENH: add back use_relative_e for third party printer
...
Useless for BambuPrinter. But used by third party printer
Signed-off-by: salt.wei <salt.wei@bambulab.com >
Change-Id: Ib6a63e78816b25696c25952508f76c3d9221e363
2023-07-07 17:29:08 +08:00
salt.wei
ede95424cf
ENH: normalize comment from OrcaSlicer
...
Mark code from OrcaSlicer with same comment tag for follow easily
Signed-off-by: salt.wei <salt.wei@bambulab.com >
Change-Id: If4db502a1b0e6d0648c73f2f383b6d1cc8e1aa01
2023-07-07 17:29:08 +08:00
salt.wei
fcbf28e220
ENH: sync voron profile from orca
...
Thanks OrcaSlicer.
Signed-off-by: salt.wei <salt.wei@bambulab.com >
Change-Id: I02f6b712cc07907ae7cae4284fb75ddef053dfea
2023-07-07 17:29:08 +08:00
lane.wei
97b28fa568
ENH: skip_object: add label_object_enabled flag in sliced_info
...
Change-Id: I7e62fd931d123b328c38da27de9625971938ac4a
2023-07-07 17:29:08 +08:00
manch1n
d72ae8084a
FIX: false alarms due to wrong print z of gcode paths
...
The print z was wrong previously when there is a wipe tower, or there
is an object with floating parts.
Jira: STUDIO-2719
udesk: https://bblcs.s5.udesk.cn/entry/ticket/show/2258732
Change-Id: Ifa070aeb548d692549cf88df0d405ecdf0160c80
(cherry picked from commit be3097d8044ce9e0079ebf7070b15c7aad7aff0e)
2023-07-07 17:25:51 +08:00
maosheng.wei
3d9487c709
ENH: [STUDIO-2450] Update the bed type to be consistent with the gcode
...
Change-Id: Ic69face644bc193e7125535697905c35ba210058
2023-07-07 17:25:51 +08:00
manch1n
b32465a1a8
ENH: increase conflict threshold to 1mm for both support lines
...
Little overlap of support lines from two objects are allowed.
Change-Id: I738874ee71fc9787abbef764dbad762c76bc5731
(cherry picked from commit a5f7a53dc818d598523149d675fd0310f5d22f86)
2023-07-07 17:25:51 +08:00
manch1n
8603bd68b0
FIX: check conflict when only have mutilcolor obj and wipetower
...
STUDIO-2789
Change-Id: Ic2cdd76416fc979b13f9c2fc9a29a5312b832caa
(cherry picked from commit 47319cafa726983f66577209b2c58fd7ead304ee)
2023-07-07 17:25:51 +08:00
SoftFever
a404bc2085
Port PrusaSlicer staggered_inner_seams
2023-07-06 21:08:39 +08:00
SoftFever
063cb978be
Support interface fan speed
2023-05-07 23:52:11 +08:00
SoftFever
7a9d99f16d
Fix an issue that OrcaSlicer can't open previously generated gcode/.3mf file #712 #958
2023-05-06 20:13:58 +08:00
Scott Mudge
d3c3140073
Fan Speed Delay + Fan Kickstart Feature ( #910 )
...
Initial commit for fan speed delay, required some changes when porting from SuperSlicer.
Co-authored-by: SoftFever <softfeverever@gmail.com >
2023-05-06 13:41:47 +08:00
SoftFever
91a4cfb422
Merge remote-tracking branch 'remote/master' into feature/merge_upstream
...
# Conflicts:
# bbl/i18n/OrcaSlicer.pot
# bbl/i18n/de/OrcaSlicer_de.po
# bbl/i18n/en/OrcaSlicer_en.po
# bbl/i18n/es/OrcaSlicer_es.po
# bbl/i18n/fr/OrcaSlicer_fr.po
# bbl/i18n/hu/OrcaSlicer_hu.po
# bbl/i18n/it/OrcaSlicer_it.po
# bbl/i18n/ja/OrcaSlicer_ja.po
# bbl/i18n/nl/OrcaSlicer_nl.po
# bbl/i18n/sv/OrcaSlicer_sv.po
# bbl/i18n/zh_cn/OrcaSlicer_zh_CN.po
# resources/config.json
# resources/i18n/de/BambuStudio.mo
# resources/i18n/en/BambuStudio.mo
# resources/i18n/es/BambuStudio.mo
# resources/i18n/fr/BambuStudio.mo
# resources/i18n/hu/BambuStudio.mo
# resources/i18n/it/BambuStudio.mo
# resources/i18n/ja/OrcaSlicer.mo
# resources/i18n/nl/BambuStudio.mo
# resources/i18n/sv/BambuStudio.mo
# resources/i18n/zh_cn/BambuStudio.mo
# resources/images/ams_humidity_2.svg
# resources/images/ams_humidity_3.svg
# resources/images/ams_humidity_4.svg
# resources/images/ams_humidity_tips.svg
# resources/images/monitor_state_on.svg
# resources/images/sdcard_state_normal.svg
# resources/profiles/BBL.json
# resources/profiles/BBL/filament/Bambu PETG-CF @base.json
# resources/profiles/BBL/filament/Generic PETG-CF @base.json
# resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json
# resources/web/data/text.js
# resources/web/guide/3/index.html
# resources/web/guide/31/index.html
# src/BambuStudio.cpp
# src/libslic3r/AABBTreeLines.hpp
# src/libslic3r/Brim.cpp
# src/libslic3r/CMakeLists.txt
# src/libslic3r/ExPolygon.hpp
# src/libslic3r/Fill/FillBase.hpp
# src/libslic3r/Format/bbs_3mf.cpp
# src/libslic3r/GCodeWriter.cpp
# src/libslic3r/Line.hpp
# src/libslic3r/PerimeterGenerator.cpp
# src/libslic3r/Preset.cpp
# src/libslic3r/Print.cpp
# src/libslic3r/Print.hpp
# src/libslic3r/PrintConfig.cpp
# src/libslic3r/PrintConfig.hpp
# src/libslic3r/TreeSupport.cpp
# src/slic3r/GUI/AmsMappingPopup.cpp
# src/slic3r/GUI/BackgroundSlicingProcess.cpp
# src/slic3r/GUI/ConfigManipulation.cpp
# src/slic3r/GUI/GCodeViewer.cpp
# src/slic3r/GUI/GCodeViewer.hpp
# src/slic3r/GUI/GLCanvas3D.cpp
# src/slic3r/GUI/GUI_App.cpp
# src/slic3r/GUI/MainFrame.cpp
# src/slic3r/GUI/PartPlate.cpp
# src/slic3r/GUI/Plater.cpp
# src/slic3r/GUI/Preferences.cpp
# src/slic3r/GUI/SelectMachine.cpp
# src/slic3r/GUI/Widgets/AMSControl.cpp
# src/slic3r/GUI/wxMediaCtrl2.cpp
# src/slic3r/Utils/Process.cpp
# version.inc
2023-04-19 08:48:07 +08:00
manch1n
ac7e9b3ee4
ENH: show the layer and height of conflict position
...
Change-Id: If80e81b5556f5afc3228a00edc2593bd8cfe63e4
(cherry picked from commit 895e0f2ecf8e259cfdb7c27081b767bfbaa3ffb6)
2023-04-17 15:39:02 +08:00
manch1n
92a32127b6
ENH: add wipe tower into conflict check
...
Change-Id: I9684ec17ccbfdea39deae6e5089b74ce3124d57b
(cherry picked from commit f6ee82b4ecf8bf9de91d0043b514cdabb7284b7e)
2023-04-17 15:39:02 +08:00
liz.li
58278af773
FIX: vector capacity reset(STUDIO-2239)
...
Change-Id: Ie40e8c6d3a42b6a40f4f73d6906acdc6e26d0b41
2023-04-17 15:39:02 +08:00
zhimin.zeng
53929911ba
FIX: delete unnecessary travel of wipe tower
...
STUDIO-2203
Change-Id: Ic55030a09f66a789245f80096e8f3ffea73a904f
2023-04-17 15:39:02 +08:00
manch1n
ee0b8132bc
FIX: Disable print button when gcode has conflict
...
Also fix a crash bug due to setStarted and setDone.
Change-Id: Ib9b069fe4b7e5d1fc359f48e44b4032dd8249428
(cherry picked from commit 9ef190ed3ecd66d12617ad96e927ff34251395a2)
2023-04-17 15:39:02 +08:00
miaoxin
ef1ada05b7
NEW: add gcode conflict checker
...
1. add gcode conflict checker
2. add a new command line option: --no_check. When it's provided, gcode
conflict check is skipped.
Change-Id: I6feafca8c5fa6c3c5eae1f0e541ce59d2f03dedf
(cherry picked from commit 5a39afb64e826a960d9673dcada89d02d62b3911)
2023-04-17 15:39:02 +08:00
salt.wei
e6a97ee0cb
ENH: fix the floating layer issue
...
Fix for floating layer under multi-color
printing while z_hop is zero.
Signed-off-by: salt.wei <salt.wei@bambulab.com >
Change-Id: I8cc96bd18020cac8424fe4c3e62fb87da118b826
2023-04-17 15:39:02 +08:00
zhimin.zeng
cdd95ccbb3
ENH: get start_gcode filament
...
Change-Id: Ia511f758d5c59ddc38c79f251e8c95511de4a235
2023-04-17 15:39:02 +08:00
zhimin.zeng
31dc77d70b
FIX: the first layer is not printed in the correct order
...
Change-Id: Ia8ad49417e6b59fa10b763cb0e207f5f79b9a4d2
2023-04-17 15:39:02 +08:00
salt.wei
3ec49fb12f
ENH: fix for STUDIO-881
...
Thanks prusa
Signed-off-by: salt.wei <salt.wei@bambulab.com >
Change-Id: I2e1c1088d29dd5401016ca41d3ed6dec87e0acd1
2023-04-17 15:39:02 +08:00
salt.wei
5339d26be8
ENH: force to use . as decimal point
...
"std::cout << float number" is unsafe which
may use , as decimal point when switch language.
Signed-off-by: salt.wei <salt.wei@bambulab.com >
Change-Id: I8a379117168eab0111dc93987b1d6130a741ade6
2023-04-17 15:39:02 +08:00
salt.wei
949ec5fe73
ENH: remove tbb simplify in gcode export
...
Useless after importing AABB tree.
Signed-off-by: salt.wei <salt.wei@bambulab.com >
Change-Id: Iaec9bef4a2a6bc4d097c6fd75720cb69d9cf314f
2023-04-17 15:39:02 +08:00
