When printing by object, not lifted when traveling to the second piece, which causes scratches on the surface of the first piece.
Modify the lift height in GCode.cpp to add a z_hop height to the highest print height to avoid scratches.
jira: STUDIO-14001
Change-Id: I97835fce5b82f405d600f5aa6ce74edae1e97b47
(cherry picked from commit 9282806196e455883b36b17391a404106c4b3c82)
Added a check for Gcode traces outside the printable area after the backend slicer, allowing command-line slicers to detect abnormal results. The GCodeProcessor's m_result.gcode_check_result.error_code now includes not only dual-head print range checks, but also checks for the machine's plate print range, wrapping detection area, and height violations.
jira: none
Change-Id: I44072ece3b4b525c77328cec2f76e205eb559cc4
(cherry picked from commit 054f936243968687f536170374a233ec912e8e42)
change: Multiply the flush_volumes_matrix in the exported gcode by the coefficient and output the final value.
Also fixed the issue where the flush matrix page was limited to 900, but the Gcode output value could be greater than 900 (the product of the matrix and the multiplier was limited to 900 before storing the value)
jira: STUDIO-13332
Change-Id: I893f27bec206c3b9da3273241d1cd5f1883e55a9
(cherry picked from commit 8aa91cd86c8c75b3736c616bcfbed4872db9734c)
(cherry picked from commit 038fc1c18220cef8c269d272059afea503fb5d5b)
* Enhance GCode handling for Z-axis movements
- Updated `travel_to_z` method to include a `force` parameter, allowing forced Z movements.
- Modified GCode generation logic to ensure Z position is restored after unknown last positions.
- Enforce z restoreation after tool changer
* Improve filament_multitool_ramming logic
* fix indent
This might help improve the quality and strength of supports.
jira: STUDIO-11985
Change-Id: I51644c84b9ede018a08a0f2b8fdca5d271d69991
(cherry picked from commit ba5dbc544b65276d772834305fcca6b5f7536d6e)
As you can see, it's checkin the local variable
`custom_gcode_placeholders` which comes from
`custom_gcode_specific_placeholders()` which is:
```
const std::map<t_custom_gcode_key, t_config_option_keys>& custom_gcode_specific_placeholders()
{
return s_CustomGcodeSpecificPlaceholders;
}
```
not s_CustomGcodeSpecificOptions
1. set wipe tower real height
2. fix wipe tower small arc error
3. add rib_width constraint to ensure that the rib wall of the wipetower are attached to the infill.
jira: STUDIO-10540
Change-Id: Idfdc809f0236121d98587ac2a09a2ebbf5caf945
(cherry picked from commit 3a7dcfd23249571224a4d538c55907a0a5c6154d)
1.Also add a new field to mark whether enable high low temp mix
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I208e0e7a4ce75feccc8659ecf940447e591d9505
(cherry picked from commit e79ba2f1ec64953100319a3d86ef9105cc7c3567)
and reduce the travel speed inside the wipe_tower
jira: none
Change-Id: I3b07ee62623e0cdc2f1824f0011f95776020bee1
(cherry picked from commit 1aad582e08229fad1f935e257c1335dcfdbe406c)
2. use most used extruder for timelapse without wipe tower
3. apply retract_when_changing_layer for multi_extruder
jira: none
Change-Id: I4ff00573fd8a6ee9fa42877e3e7056d547e4d864
(cherry picked from commit 4715fa14edf2bdfc1170b0461da699903a3078a4)
for X and P machine
2. remove lift and retract in filament_change_gcode and layer_change_gcode
jira: none
Change-Id: I3da2d3ac7f0100d1963dcbb1228323666a060534
(cherry picked from commit 5c3d804b9fbe65532d2717e60b5f1143710b0ecf)
1. support traditional timelapse for H2D when printing by object
2. insert timelapse gcode when close wipe tower
3. remove hard gcode before filament gcode
jira: none
Change-Id: Ib56c21b1f07832f2cbc8ba5ab7f2e8653b3105bf
(cherry picked from commit 7613474cefd210685d16a5585608c0c7cb7efa95)
(cherry picked from commit fff787345625a0031934e609b1b3709e39decd4a)
