1.Add a Trietree to match command instead of the switch sentence.
2.Support VM104 and VM109
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5f6b3d1bf87baebc0a20c2589a5138538469dfec
(cherry picked from commit 85cb4a41c2a7e42552d7b8c04864e5199ae942e9)
1.Add sync command. Now gcode and dirrectly add time sync command
2.Add support for ceil and floor in placeholder
3.Update change filament gcode for H2D
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6dd97cbd96bae1c2751c08357ff64947876d7471
(cherry picked from commit c99fcd454c2499b0c0e3ed9402a2182c00a9bffa)
and modify the path of travel to the wipe_tower after flushing
jira:none
Change-Id: Id4b0571fd12372c59cf522c13e256c7cc4ac3565
(cherry picked from commit 17771d0fbf753dd22411ce490586958bd643264e)
to support different printable height of multi_extruder
jira:none
Change-Id: I265c65e15fc8f598c3456556557bb6977b5de820
(cherry picked from commit 933adbaaf0eaf361e39f131dd5536dca91214d43)
1. Machine with multi extruder should set length of extruder offset
to extruder num
2. Register retract_restart_extra
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic3eb324cb91dc70b091c8922936d2709c361cc38
(cherry picked from commit 13df1ee7bab2bf13c9f5ffca6ad1228ff48e885e)
1. Nozzle Volume and Nozzle Type support multi extruder now
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie171b5105bd3830db3a992cadd365b785008c47a
(cherry picked from commit 2ebd14667e43dc745556f5e7bcbb7c2ccad4a007)
1.Save multi extruder state in gcode processor
2.Add machine exturder change time
3.Fix some naming issues
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9785331290515eeb908ff0ff01aad5aac44212d9
(cherry picked from commit b49d4ca1539cd9f473e0ee0c79a4287c0d5fe03b)
1.Caused by missing break of switch case
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie667eda4069f3e2487ed87081580e2540ae4da7b
(cherry picked from commit 9267bd65aa7a39c3a775890b59611fba7b3883ac)
* Ignore very tiny extrusions in flow rate scale (SoftFever/OrcaSlicer#9190)
* Don't show flow rate if it's not extrusion
* Merge branch 'main' into bugfox/gcode-viewer-flow-scale
Fix#6839 with final tool preheating on multitool machines causing in appropriate temp settings
Seems like Orca is trying to preheat the next tool in a multitool print, and ends up calling a heater off command in the last 30 seconds of any print.
This happens because there's no handling to check if the next active tool is an actual valid tool index, or its a T-1 command to end the print since we're using the last tool.
Simply moved the preheat commands into the conditional IF that automatically fixes this issue since the tool index is now properly evaluated.
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Junction Deviation Machine Limit
jd 3
JD menu 2
JD operativo
limpieza
final
* default JD print menu without warnings
* to fix multiple instances
* Only at first layer
* Calibs upgrade
* Shown on Marlin2
Shown on Marlin2
CodeCleaning
* Update Calibration.md
* set on writer
---------
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Some portions of GCode (like BTT_TFT thumbnails) has to be CRLF in
order to work correctly. However, gcode post processor was ignoring
input line endings style emitting '\n' (LF) into post-processed output.
ENH: support spiral lift with timelapse gcode
The existing implementation did only read the new Z position from the injected timelapse_gcode and flagged the position as unsafe because of this.
This change reads X, Y and Z pos from the timelapgse_gcode and will keep the position state correct to enable safety checks required for using spiral Z hop.
Because of this, spiral Z hop can be used everyhwere now. The same pattern is also applied for layer_change/toolhead gcode injection.
The set_current_position_clear method is unused but will be kept in implementation for future scenarios.
Co-authored-by: Simon ziehmon@users.noreply.github.com
* Revert "Fix #3311: filament Load / Unload time was not used in time estimation (#3706)"
This reverts commit 252788419b.
* revamp tool/filament change time
* tweak message
* Fix calls to depreciated wxPen constructor
* Fix use of wxTimerEvent
* Fix unrecognized character escape sequence
* Fix signed/unsigned mismatch
At least as much as possible without significantly altering parts of the application
* Clean unreferenced variables
* fix mistyped namespace selector
* Update deprecated calls
* Fix preprocessor statement
* Remove empty switch statements
* Change int vector used as bool to bool vector
* Remove empty control statements and related unused code
* Change multi character constant to string constant
* Fix discarded return value
json::parse was being called on the object, rather than statically like it should be. Also, the value was not being captured.
* Rename ICON_SIZE def used by MultiMachine
By having the definition in the header, it causes issues when other files define ICON_SIZE. By renaming it to MM_ICON_SIZE, this lessens the issue. It would probably be ideal to have the definitions in the respective .cpp that use them, but it would make it less convenient to update the values if needed in the future.
* Remove unused includes
* Fix linux/macOS compilation
* Hide unused-function errors on non-Windows systems
* Disable signed/unsigned comparison mismatch error
* Remove/Disable more unused variables
Still TODO: check double for loop in Print.cpp
* Remove unused variable that was missed
* Remove unused variables in libraries in the src folder
* Apply temporary fix for subobject linkage error
* Remove/Disable last set of unused variables reported by GCC
* remove redundant for loop
* fix misspelled ifdef check
* Update message on dialog
* Fix hard-coded platform specific modifier keys
* Remove duplicate for loop
* Disable -Wmisleading-indentation warning
* disable -Wswitch warning
* Remove unused local typedefs
* Fix -Wunused-value
* Fix pragma error on Windows from subobject linkage fix
* Fix -Waddress
* Fix null conversions (-Wconversion-null)
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
