## Summary
- Change default bed temperature type from "By First filament" to "By Highest Temp"
- Move `bed_temperature_formula` option from develop mode to advanced mode for better accessibility
- Relocate UI control from "Basic Information - Advanced" to "Multimaterial Setup" section where it's more relevant for multi-filament printing
Using the highest temperature of all printed filaments is generally safer for bed adhesion than using the first filament's temperature, especially in multi-material prints where different filaments may require different bed temperatures.
<img width="390" height="239" alt="Screenshot 2026-02-26 at 18 44 56" src="https://github.com/user-attachments/assets/0fe9f8c7-062a-4a7a-8ab3-c52df7e74b26" />
* Fix float number not working properly for option min/max (#11211)
* ConfigOptionDef: min/max values type are changed from INT to FLOAT.
(cherry picked from commit f277bc80c22e0c9a067481a4301922e2c96aed47)
* Fix infinite loop and crash when `fuzzy_skin_point_distance` = 0 (SoftFever/OrcaSlicer#11069)
* Fix Linux build issue
* Fix float comparison due to precision loss
* Fix: Range check added for coInt options; Ranges and defaults added in tooltips
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add Pressure Advance visualization support
Signed-off-by: minicx <minicx@disroot.org>
* Port Pressure Advance visualization to libvgcode architecture
Adapt PA visualization (originally in commit e3a77259) to work with
the new libvgcode library introduced by upstream PR #10735.
Changes across the libvgcode stack:
- PathVertex: add pressure_advance field
- Types.hpp: add PressureAdvance to EViewType enum
- ViewerImpl: add ColorRange, color mapping, range updates for PA
- LibVGCodeWrapper: pass pressure_advance from MoveVertex to PathVertex
GCodeViewer UI integration:
- Add "Pressure Advance" to view type dropdown
- Add PA color range in legend (3 decimal places)
- Add PA value display in sequential view marker tooltip
- Add PA row in position properties table
The GCodeProcessor PA parsing (M900, M572, SET_PRESSURE_ADVANCE)
is preserved from the original implementation.
* Tag Pressure Advance visualization changes with ORCA comments
Signed-off-by: minicx <minicx@disroot.org>
---------
Signed-off-by: minicx <minicx@disroot.org>
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
Co-authored-by: Claude <noreply@anthropic.com>
- Add configurable GLEW_USE_EGL option (default OFF) to match wxWidgets
- Explicitly set wxUSE_GLCANVAS_EGL=OFF for vendored wxWidgets build
- Add compile-time check to detect EGL/GLX backend mismatch between
GLEW and wxWidgets, preventing silent rendering failures
The bug occurred when GLEW was compiled with EGL support (using
eglGetProcAddress) but wxWidgets created GLX contexts. This mismatch
caused OpenGL function pointers to fail loading, resulting in blank
3D model preview.
Co-authored-by: SoftFever <softfeverever@gmail.com>
Wipe tower interface features and preheat fixes
Fresh PR branch rebuilt on upstream/main (squash of origin/BBL-studio-wipe-tower-merge) to avoid merge-history issues.
* Fix extruder_id out-of-bounds in switch_excluder
Added a check to reset extruder_id to 0 if it exceeds the size of nozzle_volumes or extruders, preventing potential out-of-bounds access.
Co-Authored-By: Christopher R. Palmer <1305033+crpalmer@users.noreply.github.com>
* Add custom nozzle diameter option in sidebar
Ensures that if the actual nozzle diameter is not present in the list, it is added as a custom option. This improves user experience by allowing selection of non-standard nozzle diameters.
Refactor nozzle diameter selection logic in Sidebar
Simplified the logic for updating the extruder nozzle diameter combo box by removing redundant checks and streamlining the addition of custom nozzle diameters. This improves code clarity and ensures the actual nozzle diameter from the printer config is always considered.
Co-Authored-By: yw4z <yw4z@outlook.com>
* Prevent profile switch if selected diameter matches nozzle
Adds a check in Sidebar::priv::switch_diameter to avoid switching printer profiles when the selected diameter matches the current nozzle diameter in the configuration. This prevents unnecessary profile changes and improves user experience.
---------
Co-authored-by: Christopher R. Palmer <1305033+crpalmer@users.noreply.github.com>
Co-authored-by: yw4z <yw4z@outlook.com>
* fixes: keys_map is initialized with itself [-Winit-self]
* fixes: operation on repeats may be undefined [-Wsequence-point]
* fixes: warning: suggest parentheses around && within || [-Wparentheses]
* fixes: moving brim_points to itself [-Wself-move]
* fixes: operation on unprintability may be undefined [-Wsequence-point]
* fixes: extra tokens at end of #endif directive [-Wendif-labels]
* fixes: converting to non-pointer type int from NULL [-Wconversion-null]
* review result: simplifies fix 'operation on repeats may be undefined'
# Description
The current bounding box selection display loses all usefulness once the furthest apart objects are selected.
This is especially noticeable on grid patterns, where nested unselected elements become indistinguishable after selecting all.
This PR implements a highlighting method that visually brightens individually selected objects.
# Screenshots/Recordings/Graphs
<img width="1845" height="829" alt="image" src="https://github.com/user-attachments/assets/a92a7176-182c-41e2-869e-badb220dfee2" />
Current 2.3.1: All but some objects are selected. Can you tell which ones?
<img width="2169" height="1042" alt="image" src="https://github.com/user-attachments/assets/c6c721d5-4f03-4c23-beff-b0acc0601568" />
Proposed PR: Slight lightening of selected objects
## Tests
Built on windows, tested with various colors and non-printable
This PR adds a new filament sync mode setting for device-based filament synchronization.
Users can now choose between syncing both filament preset + color (current behavior) or syncing color only, so calibrated local filament profiles are preserved while still updating slot colors from the printer.
It also includes small UI improvements for the new preference entry and sync status messaging.
<img width="665" height="671" alt="image" src="https://github.com/user-attachments/assets/23980846-0113-48ab-84aa-adf5cdab8ab6" />
* Add checks to snap wipe tower back to origin when it was loaded outside the plate boundary
* Fix Wipe Tower preview outside plate boundary and warning notification
- snaps wipe tower preview to nearest edge if it was loaded outside of plate boundary.
- Added warning notification to notify position change
# Description
Transforming internal 3D Files to DRC to reduce orca size
## Calibs
(Not counting temperature_tower)
Original 6,01 MB
Converted 1,57 MB
- Mesh (STL/3MF) to LossLess DRC
- SCV-V2 116kb -> 15kb
- fast_tower_test 66kb -> 9kb
- ringing_tower 172kb -> 22kb
- pressure_advance_test 124kb -> 16kb
- tower_with_seam 2kb -> 1kb
- retraction_tower 1.726kb -> 97kb (done at 25, if 0 = 212kb)
- ~~temperature_tower~~ Updated, fixed, wider range and Draco in: #12103 5.075kb -> 485kb
- vfa 1.453kb -> 179kb
- Step
- SpeedTestStructure 1.312kb -> 86kb
- Imported:
- Linear Deflection: 0.002
- Angle Deflection: 0.25
- Exported as LossLess DRC
## Handy Models
Original 4,66 MB
Converted 1,53 MB
- STL/3MF to LossLess DRC (Maybe reduce the bit depth???)
- 3DBenchy 2.417kb -> 570kb (done at 25, if 0 = 1.340kb)
- calicat 43kb -> 6kb
- ksr_fdmtest_v4 128kb -> 74kb
- Orca_stringhell 63kb -> 37kb
- OrcaToleranceTest 758kb -> 94kb
- Stanford_Bunny 755kb -> 187kb (done at 25, if 0 = 316kb)
- Voron_Design_Cube_v7 34kb -> 21kb
## Bit used
After some test with a lot of models and all possible combinations it's safe to say that >20 is BondingBox and mm3 volume the best it can.
So i used 25 just as a safe value in:
- Stanford_Bunny
- 3DBenchy
- retraction_tower
<img width="324" height="499" alt="imagen" src="https://github.com/user-attachments/assets/bb5000cf-c1fa-4153-af2f-691ea59bc254" />
<img width="324" height="499" alt="imagen" src="https://github.com/user-attachments/assets/f38e3528-0d05-4621-984e-f107a0eec91e" />
## MultiPart 3MF
Didint change them, too much trouble for small changes.
## Problem
Some Creality printers (e.g. Ender-3 V3 SE) rely on metadata comments in the first lines of G-code files to display print info on the screen (estimated time, filament usage, layer height). This follows a format originally used by Cura/Creality Print:
```
;FLAVOR:Marlin
;TIME:3708.97
;Filament used:6.21m
;Layer height:0.2
```
OrcaSlicer currently has no way to write content before the `HEADER_BLOCK` in the G-code output, and does not expose `print_time_sec` or `filament_length_m` as usable placeholders. As a result, these printers show zeroed-out print info on screen.
## Changes
### 1. New placeholders (post-processing)
Added two new G-code placeholders resolved during post-processing:
- `{print_time_sec}` — total estimated print time in seconds (double)
- `{filament_length_m}` — total filament length in meters (double)
These values are only available after G-code generation, so they use inline marker replacement (`@PRINT_TIME_SEC@`, `@FILAMENT_LENGTH_M@`) that `GCodeProcessor::run_post_process()` substitutes with actual computed values — the same pattern used by existing M73 and layer count placeholders.
### 2. New "File header G-code" option (`machine_top_gcode`)
Added a new G-code field in **Printer Settings > Machine G-code** that writes content at the very top of the output file, before `HEADER_BLOCK_START`. This allows users to add firmware-specific metadata that must appear in the first lines.
### 3. Creality Ender-3 V3 SE profile update
Pre-configured the Ender-3 V3 SE profiles (all 4 nozzle variants) with a default `machine_top_gcode` value matching the Cura-compatible header format, so print info displays correctly out of the box.
# Screenshots
| Before (current OrcaSlicer) | After (this PR) |
|---|---|
|  |  |
## Tests
- Sliced test model with Ender-3 V3 SE profile
- Verified G-code output contains correct values in first lines:
- `;TIME:` with actual print time in seconds
- `;Filament used:` with filament length in meters
- `;Layer height:` with correct layer height
- Verified `{print_time_sec}` and `{filament_length_m}` work in both Machine Start G-code and File header G-code fields
- Verified empty `machine_top_gcode` produces no extra output
- Built and tested on macOS (arm64)
* added option to save a profile as detached(no inheritance)
* Revert "added option to save a profile as detached(no inheritance)"
This reverts commit c1326c6decd7bae49d2e8e811ae2f477a3b1186a.
* re-commiting the changes
* fixed conflicts with upstream
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add read support for Google's Draco (.drc) format.
* Fix build on Linux
* Use boost instead of fstat.
* Switch to boost memory-mapped file to save RAM and potentially improve performance.
* Trim trailing whitespace.
* Initial Draco write support.
Currently always exports with 16-bit precision and speed 0 (best compression).
The back-end function does have arguments to specify them, it's just not hooked into the GUI.
* Add Draco to the About dialogue.
* Fix Linux compile (hopefully)
* Add an option to associate DRC files on Windows.
* Implement a Preferences option to set Draco position quantization bits
* Update src/slic3r/GUI/Preferences.cpp
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Some slight changes to ianalexis's suggestion.
* Implement a create_item_spinctrl() function for numeric inputs, and use that instead of create_item_input().
* Move "bits" to inside the spinctrl box.
* Refactor following yw4z's feedback
* Update src/slic3r/GUI/Preferences.cpp
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Change to 0 bits as the default setting for Draco export precision.
* Change to a lossy checkbox and a bits field with a range of 8-30.
* Proper SpinInput code from yw4z
* Revert "Proper SpinInput code from yw4z"
This reverts commit 7e9c85f31a0d776860690595b71441498c2034d1.
* Revert "Change to a lossy checkbox and a bits field with a range of 8-30."
This reverts commit d642c9bcc0c51b35bf915e04f35d9991c8485ddd.
* Redo preferences based on SoftFever's feedback
* Refactor to minimize code duplication
* Fix padding
* Improve Draco export quality level tooltip clarity
Clarify that 0 means lossless compression (not uncompressed),
document the valid lossy range (8-30), and better explain the
tradeoff between file size and geometric detail.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Closes#11726
# Description
Removed hardcoded 0.2mm layer height.
Now it will stay in with the user process.
Also corrected several config assignments to use print_config instead of obj->config for consistency.
## Note
Didn't change PA PATTERN because i don't know if it may impact the calibration results for this specific test.
Toolchanger printers with 4 tools were incorrectly treated as dual-nozzle (IDEX-style) printers in AMS Sync. So I was locked to just tool 1/2.
Adjusted AMS Sync to use dual-nozzle logic only for true 2-nozzle setups (nozzle_nums == 2 and filament_map in {1,2}), and route 3+ tool toolchangers through the generic mapping flow so all tool IDs are handled correctly.
Before:
<img width="2276" height="1738" alt="image" src="https://github.com/user-attachments/assets/ccebc020-37cf-4af6-8568-a9f331f6c08c" />
After:
<img width="2236" height="1662" alt="image" src="https://github.com/user-attachments/assets/030f49c3-463d-4355-95ba-ba8f95a01ecd" />
Tested on / with:
- Snamaker U1
- ARM macOS
