1. auto mode dragdrop is not allowed
2. not display filament_map when there is no result in auto mode
jira:none
Change-Id: I0800e0d832e27fe459a17bb1aa829b5e72d0ee8f
(cherry picked from commit 9ee85bef34aaabe7a4cef251f07e77f9af693a2f)
1.Use min cost max flow to solve the tool order
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I909845039b67c7fe3ddd42580ad3f1d71d52262d
(cherry picked from commit 0716b8518ef62e0eac7c45de8bafb1458d8f9a8e)
1.Save multi extruder state in gcode processor
2.Add machine exturder change time
3.Fix some naming issues
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9785331290515eeb908ff0ff01aad5aac44212d9
(cherry picked from commit b49d4ca1539cd9f473e0ee0c79a4287c0d5fe03b)
1.Caused by missing break of switch case
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie667eda4069f3e2487ed87081580e2540ae4da7b
(cherry picked from commit 9267bd65aa7a39c3a775890b59611fba7b3883ac)
1.In auto mode,display the statistics of auto mode and single
extruder
2.In manual mode,display the statistics of manual mode and auto mode
3.Support by object mode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If54c4db79f33d5278c0f18d01ab0518e8660f9c7
(cherry picked from commit 2dbc5c939666e294c805ee4bf33ec09976688be3)
1.Should calculate cost if filament used in that layer is 1,because
we should consider the last filament used in previous layer
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5838af77f1d73bfa07c65bd6ee12ae352dc3b571
(cherry picked from commit 0756b51eb2b457a1ddfddc0ab8e445c779737597)
1.Use forcast when filament num in current layer and next layer both
smaller than limit number
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia21bb22ce353f0c74eeaf748c6d9f9c4b315ec18
(cherry picked from commit c49c0c8f723e82e4e87cd931b7d5070142fb0781)
after change the filament maps, we should invalidate state
jira:none
Change-Id: If2923d959f5120bd80c5bdf3933609cf8b282523
(cherry picked from commit 5f0bb395ad6464039bdacec58c924044a27587a0)
1.Add filament flush,filament change count reduced by multi
extruder
NTOE: cases when printing by object haven't been handled
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iaaea5f8ffae2345df5a6f1dc605342d835974d48
(cherry picked from commit ad65cdb909b29210117f690a119ef76b70373da4)
1.When n becomes large,the original algorithm to get best filament
sequence will cost too much time and memory.Use a greedy algorithm
instead.Always select the next filament with fewest flush
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iabc924e1bdb0a07af0a6ef0bbdd62e54ce54f052
(cherry picked from commit 3167e34e609d0eecb481fd550e6550024b72bb67)
1. always resize filament count when not matched in full_fff_print
2. remove no-use codes in Preset::normalize
jira: no-jira
Change-Id: Ie15a5977d28f28e0f63ba84f27f98f77d16665c0
(cherry picked from commit f122c4f4ef6f476c4e8190a0872e566d690d6c25)
1.During the filament change, the extruder will extrude an extra length
of grap_length for the corresponding detection, so the purge volume can
reduce this length.
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I14f55a3200c1dd48b1603e50280d0c29e1319ebe
(cherry picked from commit 16cadec565f987e6baae97428d5392c1f8e7ad39)
1. save to appconfig and project setting
2. use it to group
jira: none
Change-Id: Id4048fc1b47f6904b2e9c0154aaa3a2b03590437
(cherry picked from commit da32b878b3d7ca95ae5c4786102848c1e8a5ab2d)
support drag drop to modify the filament map
jira: none
Change-Id: I0ed3180a0fa8e95e7c871bb039eb844faccd1344
(cherry picked from commit 67f67d76889668fdd80ae5e496b6cbca5f771a43)
1.When filament <10, do the reorder with next layer.This can reduce
10% flush in some cases
2.Support custom filament seq
3.Use caches to speed the algorithm
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie1af9841f7165802d350eae962efe8febafbb357
(cherry picked from commit cffb4a8564844b1892eb42cfe8e883a52e70fb6a)
1.When capacity is greater than the num of filaments, always choose the
map result that can be accommodated
2.In BestFit strategy,always try to fill up the existing capacity
3.In BestCost strategy, just try the group with fewest flush
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifd6d64b77774039e57ffff26cf2243a4d3f89054
(cherry picked from commit cddf8cae27f4320f830b463e92703d3a6cf344e7)
that has different nozzle nums
jira:none
Change-Id: If78571ddf4fa7ac17e7dcf47013075821b8567a6
(cherry picked from commit a6ad5c8be86313085922e3063eec2aba029a5a99)
and fix bug when switching printer preset between single-nozzle and double-nozzle, prompt the modification of extruder_count
jira:none
Change-Id: I1d5f0b2f002493378d2f482d08cfd5a72b35b99f
(cherry picked from commit ed9816397374116db37c2a76d11e0216df5aca1d)
