viewit/OrcaSlicer-KX
5
1
Fork 1
Code Issues Pull Requests Actions 6 Packages Projects Releases 4 Wiki Activity
14,866 Commits 6 Branches 4 Tags
64aed7df6945c8d50d7231aea2e324da381eac21
Commit Graph

242 Commits

Author SHA1 Message Date
rtyr
58425b4c14 Creality 0.0.10 
Parameter consistency improvements. Enabled conservative elephant foot compensation.
 2020-12-21 15:21:26 +01:00
rtyr
2e62f3043b Bumped up version to 0.0.10 2020-12-21 15:20:29 +01:00
Pascal de Bruijn
0777eb1022 Creality.ini: default to Generic PLA, and move defaults to common printer section 2020-12-18 18:55:29 +01:00
Pascal de Bruijn
73b088178e creality.ini: enable conservative elefant_foot_compensation 
given the diversity of printers and bed types and a typical lack of
auto bed levelling, it will be impossible to get a good fit
for everyone by default.

A very conservative 0.1 for elefant_foot_compensation is unlikely
to cause overcompensation.

And I'd prefer to undercompensate as opposed to overcompensate
as a default.
 2020-12-17 13:05:40 +01:00
Pascal de Bruijn
84bb2acc1c Creality.ini: improve parameter consistency 2020-12-17 13:04:39 +01:00
rtyr
4436491921 Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version. 2020-12-16 16:18:31 +01:00
rtyr
88a52f24f8 Fixed end g-code for Ender 5 2020-12-13 09:25:59 +01:00
rtyr
130161dc0e Anycubic 0.0.6 2020-12-08 22:16:13 +01:00
rtyr
cdb8e59e7e Anycubic Kossel. Updated end g-code, before layer change g-code and output filename format. 2020-12-08 22:12:15 +01:00
Nicolas North [norðurljósahviða]
c3520eb2d2 Reduced max print height for Anycubic Predator to 445mm 2020-12-08 11:12:42 +01:00
rtyr
b3d3685232 TriLAB 0.0.5 Removed obsolete host keys. 2020-12-05 11:29:16 +01:00
rtyr
0147f46118 Anycubic 0.0.5 Updated end g-code. 2020-12-05 11:23:07 +01:00
rtyr
4d69cc6ded LulzBot 0.0.2 Removed obsolete host keys 2020-12-05 11:19:53 +01:00
rtyr
172596ef94 BIBO 0.0.3 Removed obsolete host keys 2020-12-05 11:14:27 +01:00
rtyr
d8d423fff2 0.0.8 min_slic3r_version changed to 2.3.0-beta2 2020-12-05 10:21:13 +01:00
rtyr
59bf949cec Changed layer_z to max_layer_z in end g-code. 2020-12-05 10:18:49 +01:00
rtyr
8d0a439ca3 Removed redundant line 2020-12-05 09:58:51 +01:00
rtyr
5a287f4dd1 Updated end g-code. Added full_fan_speed_layer values. 2020-12-05 09:55:07 +01:00
rtyr
c1fb533185 Creality 0.0.8 2020-12-05 09:53:05 +01:00
rtyr
38a7c8e63c bumped up to 0.0.8 2020-12-05 09:51:38 +01:00
Pascal de Bruijn
40c23bfef1 creality.ini: add Extrudr PLA NX2 spool weight 2020-11-29 19:05:02 +01:00
Pascal de Bruijn
7d56eaecd4 creality.ini: add 3DJAKE ecoPLA spool weight 2020-11-29 12:47:48 +01:00
Pascal de Bruijn
1f7178ca37 creality.ini: slight end_gcode improvements 
gcode order made more similar to prusa mini
 2020-11-29 12:42:08 +01:00
rtyr
049e178c0a 1.2.0-beta0 2020-11-28 10:35:59 +01:00
rtyr
436cac6a8f TriLAB - Added PLA, PETG profiles for 0.8 nozzle, update print materials 
https://github.com/prusa3d/PrusaSlicer-settings/pull/110
 2020-11-24 09:53:50 +01:00
rtyr
4ee58ebbd2 1.2.0-alpha0 added filament spool weight 2020-11-21 15:42:38 +01:00
rtyr
fdf9aa8ace Creality 0.0.7 - updated start g-code 2020-11-21 10:24:54 +01:00
rtyr
f06ccd66a9 Bumped up creality bundle version to 0.0.7 2020-11-21 10:22:57 +01:00
Pascal de Bruijn
59cb9d90af creality.ini: make start_gcode robust for absolute_e 2020-11-18 18:40:20 +01:00
Nicolas North [norðurljósahviða]
af0b342e15 revert version bump to 0.0.4 and remove accel settings for Predator 2020-11-15 00:51:17 +01:00
Nicolas North [norðurljósahviða]
e206846d7c Equalize all accelerations to avoid filling gcode with M204 commands 2020-11-14 17:16:46 +01:00
Nicolas North [norðurljósahviða]
f9a79e3713 fix spurious custom setting in Anycubic Predator profile 2020-11-14 12:27:20 +01:00
rtyr
c2dc0fa230 Updated Anycubic thumbnails. 2020-11-13 13:08:09 +01:00
rtyr
fb2a9862e7 Updated LulzBot thumbnails. 2020-11-12 19:20:23 +01:00
rtyr
b1cef96071 Added filament profiles, adjusted temperatures, updated start g-code for some models. 2020-11-12 18:55:42 +01:00
rtyr
384c2aced3 Version changed to 0.0.6 2020-11-12 18:52:48 +01:00
rtyr
388beeb958 Updated BIBO2 thumbnail. Removed "BETA" label. 2020-11-12 18:47:30 +01:00
Pascal de Bruijn
d513288916 creality.ini: raise remaining PLA bed temperatures to 60 
While doing a bunch of bed adhesion tests, both on Creality's
FakeTak as well as on smooth PEI, while 50 degrees seems to work
with most lower temp PLAs at least, but less so with the higher
temp PLAs, it universally requires the first layer height to be
dialed in much better to not get any warping.

With the bed temperature set to 60 degrees, there is much more
leeway in the first layer height while still getting unwarped
prints.

Particularly given that most Creality printers don't have ABL as
standard, I think it might sense from a robustness perspective
to have all PLAs default to at least 60 degrees, as to increase
chances prints will come out just fine.

https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
 2020-11-12 18:26:45 +01:00
rtyr
ffed59e796 Updated creality thumbnails. Removed "BETA" label. 2020-11-10 17:53:49 +01:00
rtyr
55498604d4 Updated thumbnails. Removed "BETA" sign. 2020-11-10 17:26:42 +01:00
rtyr
93ff058d6f Added DeltiQ 2, DeltiQ 2 Plus printers, 0.10mm, 0.20mm FLEX print profiles, updated print materials, flexprint extension support 
https://github.com/prusa3d/PrusaSlicer-settings/pull/108
 2020-11-10 16:02:34 +01:00
rtyr
d9c92c9310 Merge pull request #5118 from trilab3d/master-trilab 
Added thumbnails for new TriLAB printers
 2020-11-10 15:59:49 +01:00
Matej Supik
2326bb9743 Added thumbnails for new trilab printers - https://github.com/prusa3d/PrusaSlicer-settings/pull/108 2020-11-10 12:02:50 +01:00
Pascal de Bruijn
0ef2eb9b9c creality.ini: Add Devil Design PLA Galaxy (Glitter) 
This glitter PLA requires a significantly higher hot end temp to
get a similar amount of flow as the same brands counterpart
regular PLA filament

It even needs a slightly higher bed temp to prevent warping on
sharp corners
 2020-11-09 19:27:02 +01:00
Pascal de Bruijn
8201d6f32b creality.ini: disable pause_print_gcode (#4980) 2020-11-09 18:52:01 +01:00
rtyr
21dea54a95 Merge pull request #5114 from pmjdebruijn/creality_head_bed_first 
creality.ini: introduce slow abl variant start_gcode
 2020-11-09 15:38:43 +01:00
Pascal de Bruijn
a8b3e7dbd1 creality.ini: introduce slow abl variant start_gcode 
printers with a large bed are probably more prone to heat induced
bed warping, there we'll split up our abl start_gcode in fast
and slow variants, where printers with a smaller bed like
the Ender-3 will still use the fast variant, printers with
a large bed like the CR-10 will use the slow variant which
heats up the bed before starting the abl procedure.
 2020-11-09 13:48:01 +01:00
rtyr
02f394cbdd Fixed predator output filaname format, infill overlap 2020-11-09 11:44:00 +01:00
rtyr
a4635a3d82 Bumped up version to 0.0.4 2020-11-09 11:43:02 +01:00
rtyr
65887baebc Merge pull request #5104 from Tillverka3d/master 
Fix predator output filaname format, infill overlap, and retraction length
 2020-11-09 11:39:39 +01:00