1.fix crash when deleting filaments after sync ams or inital start up
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I00c96fcebf7e0fbc127414eae44f184e3caf4dd9
(cherry picked from commit 6fb0ef6e68ed673d04c1c2311835e9988b1c70d3)
(cherry picked from commit 78b00bd0e3243bc4a4d1b72547b02ee85bf7a19a)
1.Add more filament map modes
2.Filament map and mode are set as project config
3.Plate filament map is only valid when plate filament mode is
manual
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I33b2f853e0b77b9d605be1f2f1172b44df43da15
(cherry picked from commit e45f8c6dc2146e1e31a1c21e8aaada540af112d0)
when save MW 3mf file as multi-extruder
jira:none
Change-Id: I848e348277fb047c2c3569508d2adbe940e40255
(cherry picked from commit 17edbd8cd57b761027bb3c1f4d318578ab27430e)
1. generate filament_self_index for old files in cli
2. set filament_self_index to default for old files using single extruder
jira: no-jira
Change-Id: I6e3f520723ee7f3a75634121604023ba319ff97a
(cherry picked from commit d050aa4d3609e7ccf072b23fbfe820a839e0c3fd)
some param has been changed for the multi-extruder
currently we popup an exception
JIRA: no-jira
Change-Id: I1e892203d34c569a580694c1c28a1c7d695c1c64
(cherry picked from commit 2636e44dc0a276962c77ed0a51128009bbf7608f)
1. also remove original nozzle_volume_type from printer
and move into project config
2. support save nozzle_volume_type into appconfig
and load from it at beginning or printer switch
jira: no-jira
Change-Id: I01fc82d142fc633fc59a238796a71b9f8d180efb
(cherry picked from commit fe8b904e7551cde83b1ead75922e9b60278b50ad)
1. always resize filament count when not matched in full_fff_print
2. remove no-use codes in Preset::normalize
jira: no-jira
Change-Id: Ie15a5977d28f28e0f63ba84f27f98f77d16665c0
(cherry picked from commit f122c4f4ef6f476c4e8190a0872e566d690d6c25)
1. save to appconfig and project setting
2. use it to group
jira: none
Change-Id: Id4048fc1b47f6904b2e9c0154aaa3a2b03590437
(cherry picked from commit da32b878b3d7ca95ae5c4786102848c1e8a5ab2d)
we need to keep the original values and update after pre-slice
jira: no-jira
Change-Id: I232d3c43340b4a23bc42121bd05380746e736f20
(cherry picked from commit 7b7ebf1b959ba5c967baff30fb226c808a2e7d44)
During the printer connection cycle, each Filament and slot is only judged once
When deleting custom filaments or modifying the temperature of custom filaments, re evaluate
Jira: XXXX
Change-Id: If495a343efdb1be6f46d11dd20f6ec7934266e87
(cherry picked from commit e5dab1487188d744c732568232b32666e5f2cc5c)
* Fix calls to depreciated wxPen constructor
* Fix use of wxTimerEvent
* Fix unrecognized character escape sequence
* Fix signed/unsigned mismatch
At least as much as possible without significantly altering parts of the application
* Clean unreferenced variables
* fix mistyped namespace selector
* Update deprecated calls
* Fix preprocessor statement
* Remove empty switch statements
* Change int vector used as bool to bool vector
* Remove empty control statements and related unused code
* Change multi character constant to string constant
* Fix discarded return value
json::parse was being called on the object, rather than statically like it should be. Also, the value was not being captured.
* Rename ICON_SIZE def used by MultiMachine
By having the definition in the header, it causes issues when other files define ICON_SIZE. By renaming it to MM_ICON_SIZE, this lessens the issue. It would probably be ideal to have the definitions in the respective .cpp that use them, but it would make it less convenient to update the values if needed in the future.
* Remove unused includes
* Fix linux/macOS compilation
* Hide unused-function errors on non-Windows systems
* Disable signed/unsigned comparison mismatch error
* Remove/Disable more unused variables
Still TODO: check double for loop in Print.cpp
* Remove unused variable that was missed
* Remove unused variables in libraries in the src folder
* Apply temporary fix for subobject linkage error
* Remove/Disable last set of unused variables reported by GCC
* remove redundant for loop
* fix misspelled ifdef check
* Update message on dialog
* Fix hard-coded platform specific modifier keys
* Remove duplicate for loop
* Disable -Wmisleading-indentation warning
* disable -Wswitch warning
* Remove unused local typedefs
* Fix -Wunused-value
* Fix pragma error on Windows from subobject linkage fix
* Fix -Waddress
* Fix null conversions (-Wconversion-null)
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* creating settings for printer and some UI changes work
* related filament diameter and pellet flow changes to each other
* UI name change to turn Filament to Material
* updated the flow coefficient to filament diameter formula
* updated the preset for the configuration wizard
* configuration changes for the final release
* config changes and preset bundle sync removed
* start gcode change for ginger machines
* added explanation of relationship between pellet_flow_coefficient and filament_diameter
* Added tooltip. Fixed Ginger machine configuration, Added docs
* Allow using BBL's device tab when 3rd party print host is used
* Add option to open SimplyPrint panel in device tab after uploading
* Fix default print host for prusa connect
* Do not set api key in device view when SimplyPrint is used
* Sending 3mf file to SimplyPrint when using BBL printers
* Fix file extension when uploading 3mf
* Prepare for large file uploading
* Implement chunk upload
* Fix file uploading exceeding content size
* Fix wrong field type
* Add `temp=true` to all chunk upload calls
* Add macro to enable test api
* Merge branch 'main' into dev/simplyprint-improve
* Fix another missing `temp=true`
* Add delete token
* Try fixing build error on *nix systems
* Merge branch 'main' into dev/simplyprint-improve
* Merge branch 'main' into dev/simplyprint-improve
* Merge remote-tracking branch 'remote/main' into dev/simplyprint-improve
# Conflicts:
# src/slic3r/GUI/BackgroundSlicingProcess.cpp
* Move the `bbl_use_print_host_webui` option to print host dialog. Also make it a derived option of `print_host_webui` instead.
* Merge branch 'main' into dev/simplyprint-improve
# Conflicts:
# src/slic3r/GUI/MainFrame.cpp
# src/slic3r/GUI/Plater.cpp
* Merge branch 'main' into dev/simplyprint-improve
# Conflicts:
# src/slic3r/GUI/Plater.cpp
* Use a more generic option instead of SimplyPrint specific
* Merge branch 'main' into dev/simplyprint-improve
* Merge branch 'main' into dev/simplyprint-improve
* fixed logic error in PLA jamming gcode for P1S
* Fix use after free bug in LinesBucketQueue::emplace_back_bucket
I found a use after free bug in LinesBucketQueue::emplace_back_bucket. This was found by enabling address sanitizer.
The LinesBucketQueue class has two related members:
std::vector<LinesBucket> line_buckets;
std::priority_queue<LinesBucket *, std::vector<LinesBucket *>, LinesBucketPtrComp> line_bucket_ptr_queue;
line_bucket_ptr_queue holds pointers into line_buckets. However, since items are inserted into line_buckets one at a time, existing pointers that were stored inside line_bucket_ptr_queue become invalid. Specifically:
void LinesBucketQueue::emplace_back_bucket(ExtrusionLayers &&els, const void *objPtr, Point offset)
{
auto oldSize = line_buckets.capacity();
line_buckets.emplace_back(std::move(els), objPtr, offset); <--- Causes a reallocation, making previous pointers invalid
line_bucket_ptr_queue.push(&line_buckets.back()); <-- priority queue compares against old, now invalid pointers
...
The proposed fix is to calculate the required number of entries in ConflictChecker::find_inter_of_lines_in_diff_objs, and then calling line_buckets.reserve(count). This ensures that sufficient buffer is allocated up front and the pointers are stable as items are added.
* Updated to fix the handling of the capacity change, and removed the code I previously added to reserve upfront since it is not really needed
* Remove accidentally added whitespace
* Removed unused method
* ENH:add mz_zip_reader_extract_to_file_w api
to solove plugin install failed problem by special wide char
jira: none
Change-Id: Ic7d3efe3fdf852387650abf9df65803da9e46a60
(cherry picked from commit b68ad03717a63675fef2f3ef73d4058bf311adea)
* FIX: PrinterFileSystem report real connect error
Change-Id: I99d6ff7f6dcb1f53ccf59854f5f19d0bd39fa9fc
Jira: none
* rename preference name
* FIX:Relax restrictions on importing obj files
jira: none
Change-Id: I61a0156a8424a5f59922956918d37d38e2c3306a
* FIX: [6469] popup dialog too mach when reload object
Jira: 6469
Change-Id: I4097e3a3b018c7a676fea93bf63f8f778bb3148b
* FIX:fixed incorrect display of printer options page on Linux
jira:[STUDIO-6220]
Change-Id: Id1f084658b0b340b7f17ab97ba82c0fd3ae83fae
* FIX: handle exception of dividing by zero in arranging
jira: none
Change-Id: I0d20464dbe81a80293539100f06d72dee456a27b
(cherry picked from commit 94746ae9bf7f467243849570450567b4fdc78e3a)
* ENH:delete no use code
jira: none
Change-Id: I40e7ffa7ea47bb3cd4039eef9f6c28c604eb3abc
* FIX: PrinterFileSystem::FileRemoved
Change-Id: I891aaa8d58ff379dc1ebd8581064865a33388f74
* FIX: resend ttcode to printer on -90 error
Change-Id: I96dc45102a2759a9f1a0002f42c3a91b2c6b2d75
Jira: STUDIO-5947
(cherry picked from commit 97d687b7c88f8cd51b8eddd39120349d8eac42b1)
* FIX: fix some issue in multi machine
JIRA: STUDIO-6934 STUDIO-6888
1. Fix the issue of incomplete display caused by excessively long file names
2. Fix the issue of icon display being too large
3. Fix the issue of garbled Chinese characters in the task list
Change-Id: I36bc10bf2067f44aaa7e3651b58e526ea323c8ad
* FIX: Incorrect multiplier, when the multiplier is set to below 1
github: #3987#3805
1. In some languages that use commas as decimal points, setting multiplier below 1 will resolve to 0
2. Unable to save multiplier correctly
Change-Id: I62bc55e270929ebb5e910eb79c6f97106e842b93
* Arrange
* FIX: wrong wipe tower when open 3mf file
1.wipe tower pos in 3mf was overwritten by default pos when opening 3mf
with a different printer profile.This patch fix it
jira: STUDIO-5890
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I12e5d4b80a0ad86194db0682c1763ba4a9492521
* ENH: update A1 machine gcode
1.Adjust the y position of the A1 extrusion compensation line
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iea690a0184ae10a47f53e1532272c31fc0a04cfa
* FIX: minor spelling mistake in gcode
github:#3477
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id3201bf8b8125ce060e2cac102ab2525877e27c1
* FIX: slice crash with height_range
github: 3917
Change-Id: Icdf83013213b47935b7a795ed75cc3d49057665d
* FIX: ERROR_RES_BUSY text
Change-Id: Ifde1a7b0c6ab915eb226c2072c46edd40f60cf9a
Jira: STUDIO-6436
* ENH:Unable to send printing without selecting a device
jira:[STUDIO-6850]
Change-Id: Ic537579727fd1618af364db93fce8fbbe4cd635a
* FIX:add exit_gizmo before slice model
jira: STUDIO-5531
Change-Id: Icddc9d73b3d91bb68e9768d13e48cbae0680e58e
* FIX: PrinterFileSystem report real connect error
Change-Id: Id6750cfa2a98fe8325ba677dabb606a0a701b495
* FIX: add can slice judgement in slice all plates processing
jira: STUDIO-6325
Change-Id: Ic7fb8cef000c03210bb77289a570ee6b60b6083e
* FIX:Fixed error in displaying the name of Bambu filaments
Change-Id: Ib42194c07b6eefe793eec81a588debc9d622d951
* FIX: text hidden in calibration tab
jira: STUDIO-6264
Change-Id: I24fbc590638a3213d948a973422e010486113923
* FIX: logic error in PLA fan control
github PR: #3948
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I28e4a673e590e83d151e92cc82caab45012aeabe
* FIX:upgrade cluster algorithm to remove duplicate labels
jira: none
Change-Id: I4d68d8cd8e080932c7c308bc8f69e27546ffe309
* FIX: can not parse json float in ES on macOS
jira: STUDIO-5889
Change-Id: I622f4b474c378d77b0e43d67a320f023be2d5811
* ENH:Clear the value of the previous nozzle type
jira:[for nozzle check]
Change-Id: I9a932b833fb07de6cb0a91abe6372b0e91f273f1
* ENH: update A1 gcode
1.Modify the width of extrusion compensation line
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I90543758c866d74f2154e3135d7569109def84b8
* FIX: the height range is not valid in assemble object
github: 3876
Change-Id: Id38672bbf0c01bc9b9f0a3e2bf1052d945b45131
* FIX: calibration page text hidden in linux
jira: STUDIO-6264
Change-Id: If210abf64057eb2e9c2c5b11d41fa33f18684c72
* ENH:clear nozzle information
jira:[STUDIO-7050]
Change-Id: I15ca4973d09132ddb5cb5a56bedd795ba6976b27
* update plugin version
---------
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: afriede <me@afriede.dev>
Co-authored-by: Momin Al-Ghosien <momin@sanestudios.com>
Co-authored-by: zhou.xu <zhou.xu@bambulab.com>
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com>
Co-authored-by: maosheng.wei <maosheng.wei@bambulab.com>
Co-authored-by: tao wang <tao.wang@bambulab.com>
Co-authored-by: Arthur <arthur.tang@bambulab.com>
Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com>
Co-authored-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
Co-authored-by: liz.li <liz.li@bambulab.com>
