9ede830f66
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-26 10:10:23 +01:00
500c667d7a
Extended miniz with https://github.com/richgel999/miniz/pull/147
...
to support writing a file from a callback without knowing the file
size up front. See comments in src/miniz/README-Prusa.txt for potential
pitfalls.
2021-01-26 09:29:34 +01:00
4620402ab4
WIP: Initial Fuzzy Skin implementaiton #2010
...
Based on pull request Experimental fuzzy skin mode #4611 by @etet100
and on CuraEngine implementation of perimeter fuzzyfication
void FffPolygonGenerator::processFuzzyWalls(SliceMeshStorage& mesh)
2021-01-26 09:29:34 +01:00
79b7ccbb79
OSX specific, related to the wxWidgets 3.1.4: Fixed wrong UI-scaling
...
(wxWidgets 3.1.4 can binding of wxEVT_DPI_CHANGED now, so it was called msw_rescale() for most of the controls redundantly)
+ Fixed update of the DoubleSlider after changing of the system color
2021-01-22 21:44:15 +01:00
eef800b5c4
FIXME on ExPolygon::overlaps(), which should be commutative.
2021-01-22 15:32:45 +01:00
30f43974fb
ENABLE_GCODE_VIEWER_STATISTICS - GCodeViewer statistic dialog modified to not require extra frames render
2021-01-22 12:32:40 +01:00
97c31b2a34
ENABLE_SPLITTED_VERTEX_BUFFER - Re-enable tech ENABLE_TOOLPATHS_ALTERNATE_SMOOTHING after fixing it
2021-01-21 16:33:35 +01:00
0f8e7f3e8b
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-21 09:44:27 +01:00
56b378d766
Fixed visualization of point toolpaths, broken with daa0bbdb0c
2021-01-21 09:44:02 +01:00
59017a7dae
wxBitmapComboBox under OSX and wxComboBox under other platforms is used on Manipulation panel for coordinate space choice now.
...
+ Fix of warning on wxBitmap.SetWidth(): deleted meaningless from wxWidgets 3.0 code
2021-01-20 17:34:54 +01:00
5161643fc6
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-20 13:48:09 +01:00
ee40ab421a
ENABLE_SPLITTED_VERTEX_BUFFER - Use unsigned short indices buffers to render toolpaths and temporary disable tech ENABLE_TOOLPATHS_ALTERNATE_SMOOTHING which is causing artifacts
2021-01-20 13:47:48 +01:00
6d7d482ca1
Fix of Extrusion Width Percentge #4631
...
Fixed extrusion width validation logic in case the extrusion width
was specified wrt. layer height.
2021-01-20 11:03:52 +01:00
979dfe50b8
OSX specific, needed after update of Xcode to 12.2 with OSX SDK 11.1,
...
where we have issues with false positives of address sanitizer
https://github.com/google/sanitizers/wiki/AddressSanitizerContainerOverflow#false-positives
Setting ASAN_OPTIONS=detect_container_overflow=0 inside Info.plist
2021-01-20 09:21:16 +01:00
c506c15ed4
Manual merge of 4e586b8edabde1146c4013ca2437469a448315e2 from upsteam Slic3r,
...
fixing "percent first layer speed was not applied over autospeed." GH upstream Slic3r #2945
our GH issue First Layer Speed Percentage not applying (#5829 )
2021-01-19 16:50:24 +01:00
b7c8d6db9f
Bumped up minimum required OSX version from 10.9 to 10.10 due to
...
an update of wxWidgets, which do not compile cleanly on 10.9 without
further patching.
2021-01-19 15:59:29 +01:00
6d49bc1978
Follow-up to 2bc6679a62
...
Set the printer_technology field.
2021-01-19 15:35:27 +01:00
2bc6679a62
Partial revert of 1bffc2b99b
...
(deriving the printer technology from the merged configs).
2021-01-19 15:18:03 +01:00
56e7d83513
Implement exception rethrow for ui jobs
2021-01-19 15:01:20 +01:00
a5dc3c4b66
Bugfix: CLI slicer should slice in FDM mode when no printer_technology is provided.
...
This was broken between 2.2.0 and 2.3.0 (1bffc2b
2021-01-19 10:29:35 +01:00
5294a48ee8
Fix of prusa 2.3.0 crash with 0.25 nozzle #5825
...
Importing a config bundle as a config file was broken for
multi material FDM printers, where a different filament was active
for each extruder.
2021-01-19 09:58:14 +01:00
1efa129b67
Fix of #5619 - Copying Item with Printable Property
2021-01-18 15:19:02 +01:00
56d26ad491
ENABLE_SPLITTED_VERTEX_BUFFER - slightly faster indices buffers generation in GCodeViewer::load_toolpaths()
2021-01-18 13:55:45 +01:00
3a0aabb924
ENABLE_SPLITTED_VERTEX_BUFFER - small refactoring in GCodeViewer::load_toolpaths()
2021-01-18 11:37:23 +01:00
59cabc9712
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-18 09:59:26 +01:00
8f1bc02287
ENABLE_SPLITTED_VERTEX_BUFFER - fixed cracks in toolpaths when splitting vertex and index buffers
2021-01-18 09:59:05 +01:00
9a2310ae98
Fix of [prusa3d/PrusaSlicer] Remove unnecessary null pointer checks ( #5813 )
...
Don't use
if (ptr)
delete ptr;
call
delete ptr;
directly, it contains the test for null ptr.
2021-01-18 09:33:19 +01:00
59911e7c35
Slight improvement in Hilbert infill by using constexpr
2021-01-15 09:34:50 +01:00
63e666b8d6
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2021-01-14 12:51:38 +01:00
48877614e2
Fix of --scale-to-fit not accepting any input as valid ( #5772 )
...
Fixed parsing of Point3, fortunately Point3 was used at just a single
command line parameter, thus this was not a big deal.
2021-01-14 12:51:28 +01:00
f27032f603
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-14 11:38:22 +01:00
8bdfb6bbce
ENABLE_SPLITTED_VERTEX_BUFFER - fixed bugs in export of toolpaths to obj files and in index buffer splitting
2021-01-14 11:38:03 +01:00
af6ef2cb8a
Merge remote-tracking branch 'origin/master' into dev
2021-01-13 14:18:55 +01:00
bda43e4482
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-13 10:46:11 +01:00
67e144f329
ENABLE_SPLITTED_VERTEX_BUFFER - fixed export of toolpaths to obj files
2021-01-13 10:45:52 +01:00
293f85b6cf
Fix of Invoking prusa-slicer from $PATH environment variable crashes #5542
...
Also it likely fixes Crashes when started from symbolic link #5751
2021-01-13 09:22:13 +01:00
0369caa9e1
Fix of #5163 and #5505 - Vertical cutting of the preset comboboxes on a sidebar
2021-01-12 14:54:58 +01:00
dc781535b2
Code cleanup
2021-01-12 14:34:52 +01:00
e443fe49ad
ENABLE_SPLITTED_VERTEX_BUFFER - fixed visualization of last segment for paths whose vertex buffer has been splitted
2021-01-12 14:03:58 +01:00
fb7dada01d
1st installment of tech ENABLE_SPLITTED_VERTEX_BUFFER - split vertex buffer when greater than a fixed max size
2021-01-12 09:03:35 +01:00
f6f1a3265b
Added conversion to c_str
2021-01-12 08:54:39 +01:00
250adabd5c
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-12 08:10:17 +01:00
7d751753bc
Replaced __linux macro with __linux__
2021-01-11 13:31:30 +01:00
7a1574a853
Fix of #5720 - SL1 Printer Settings->Notes is not updated when switching tab
2021-01-11 13:11:35 +01:00
5a1a41096b
Fix of a crash when slicing an object producing no layers and
...
elphant foot compensation is enabled.
2021-01-11 12:20:50 +01:00
d46a756b98
Finally fixing the single instance for AppImage
2021-01-11 11:41:22 +01:00
a900b7767b
Fix of previous commit
2021-01-11 11:29:27 +01:00
7780221683
Fixed "Single instance" locking issue on Linux with AppImage,
...
where the PrusaSlicer binary is mounted at a different mount point
at each AppImage execution.
Fixes Lock files in the local configuration directory are not deleted (#5733 )
2021-01-11 11:14:59 +01:00
2db704917a
Use correct M204 command for acceleration
...
M204 S is not supported for RepRapFrimware (https://duet3d.dozuki.com/Wiki/Gcode#Section_M204_Set_printing_and_travel_accelerations ).
2021-01-11 10:50:18 +01:00
ecda157c51
Fixed build regression in commit a5882a1a1c on some Linux platforms. We need to link with GTK libs after all.
2021-01-10 22:39:59 -08:00
