Including a marathon of resolving merge conflicts due to PRs today.
We should abolish multi-line msgids :-)
# Description
This looks like a huge PR, but it is only fixes for typos and grammar.
On the previous PR #6638 I mistakenly used _en.po as the reference
instead of the .pot.
It caused missed strings in the source and other .po files.
This around I triple checked again to make sure the msgids are in sync
with the L"" strings in the code.
Comments, variable names and non-English translation strings were
excluded.
I learnt that typos were "fixed" before by using translations. After
this PR, those translations are no longer relevant and can be cleaned
up.
Hopefully this sets a new baseline which will last us a while. :-)
<!--
> Please provide a summary of the changes made in this PR. Include
details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be
considered?
-->
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
The code compiled and ran successfully.
The translation files were verified with ./run_gettext.sh
I did not se any issues when running ./run_gettext.sh --full
Please confirm it again, before the merge.
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
* Ported filament shrinkage compensation from Prusa Slicer. Updated logic to be 100 = no shrinkage to be consistent with orca definitions
* Code comments update
* Merge branch 'main' into Filament-Shrinkage-compension---port-from-Prusa-slicer
* Merge remote-tracking branch 'upstream/main' into Filament-Shrinkage-compension---port-from-Prusa-slicer
* Merge branch 'main' into Filament-Shrinkage-compension---port-from-Prusa-slicer
* Fix linux deps debug build
* Use the same DL_CACHE for release build when building debug version of deps on Linux.
This prevents downloading the same source packages twice, and avoid downloading again after deleting the build dir.
* Fix debug build
* Fix warnings "loop variable creates a copy from type" and "loop variable binds to a temporary constructed from type"
* Added SBS to filament_info.json
* Added SBS to Print.cpp
* added SBS to PrintConfig.cpp
* Added SBS to BBL
* Added SBS Template and also specified SBS as type in fdm_filament_sbs.json
* Updated settings for SBS in filament_sbs_template.json
* Applied SBS settings to fdm_filament_sbs.json
* added settings to Generic SBS @base.json
---------
Co-authored-by: Duan Gauche <duan.gauche@pdsvision.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Revert "Fix #3311: filament Load / Unload time was not used in time estimation (#3706)"
This reverts commit 252788419b.
* revamp tool/filament change time
* tweak message
* Adaptive Pressure advance options setup
* Dynamic PA - PCHIP interpolator code and tests
* Integrate dynamic PA with slicing code - emit new PA values per speed change
* Link adaptive PA to role change instead of speed change
* Adaptive PA - Alpha 2
Reduce the frequency of requested PA changes by introducing a "state" variable.
Implement user toggle for adapting PA for external walls for overhangs
* Hide adaptive PA for overhangs
* Convert Adaptive PA to use volumetric flow model and start preparing for converting to Gcode post processor
* Converted Dynamic PA to a post processing filter. Reverted changes in GCode cpp and created tagging mechanism to allow filter to apply PA changes.
* Removed adaptive PA for overhangs
* Foundations for two dimensional adaptive PA based on acceleration and volumetric flow speed
* Minor code cleanup and updating of tooltips
* Renaming files for better clarity and generate classes documentation
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* Introduce average mm3_mm over the length of a multipath for adaptive PA
* Updates for multipath handling part 2
* Introduce average mm3_mm over the length of a multipath for adaptive PA
* Trigger PA evaluation more frequently to catch edge cases where speed changes across islands of the same feature type.
* Updates for multipath handling part 2
* Adaptive PA: Implement average flow estimation on loops
* Code formatting
* Fix adaptive PA not adapting for small disconnected external wall line segments.
* Updated to take max print speed of upcoming feature to calculate new PA value.
This is to resolve issue of incorrect PA value used when starting a new feature at an overhang.
* Code clean up
* Performance tuning
* Further performance tuning by reducing use of regex commands in the nested loops and fix bug preventing gcode line output
* Further performance tuning and tweaks to stop searching for max speed after the first travel move.
* Reduce debug information
* Updated debug info
* Fix an issue on seams on specific models when wipe before external perimeter was enabled. Also cleanup documentation and add new to-do's
* Prepare for adaptive PA for overhangs, fix wipe bug & clean up code and comments
* Initial commit for adapting PA when extruding fully overhanging perimeters
* Ignore wipe command when identifying current print speed
* Option to evaluate adaptive PA on overhang regions in preparation for Klipper experimental option testing
* Update to issue PA changes for varying flow conditions within the same feature
* Fix bug where adaptive PA was enabled erroneously for role changes and ignoring user's preference.
* Refactored some code
* More refactoring
* Some bug fixes and enabled comments only when verbose g-code is enabled
* Introduced dedicated PA option for bridges
* Code refactoring to optimise initialisation of PA processor (making it faster). Fix a bug where PA was not always set after a toolchange. Improve general error handling and robustness.
* Updates to adaptive PA tooltips
* Bridging PA check with Epsilon instead of 0.
* Adaptive PA: addressing comments
---------
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* Init port of Cura's MM interlocking
* Refactor a bit
* Fix crash when bottom surface is multi-color
* Fix crash when boundary avoidance is 0
* Add config
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* creating settings for printer and some UI changes work
* related filament diameter and pellet flow changes to each other
* UI name change to turn Filament to Material
* updated the flow coefficient to filament diameter formula
* updated the preset for the configuration wizard
* configuration changes for the final release
* config changes and preset bundle sync removed
* start gcode change for ginger machines
* added explanation of relationship between pellet_flow_coefficient and filament_diameter
* Added tooltip. Fixed Ginger machine configuration, Added docs
* add missing includes
Building without precompiled header support revealed some missing
includes that are added with this change for code health purposes.
Those missing includes were hidden by precompiled header support due to
the fact that the precompiled header file provides some definitions
despite not being defined in directly or indirectly included header
files.
* Allow using BBL's device tab when 3rd party print host is used
* Add option to open SimplyPrint panel in device tab after uploading
* Fix default print host for prusa connect
* Do not set api key in device view when SimplyPrint is used
* Sending 3mf file to SimplyPrint when using BBL printers
* Fix file extension when uploading 3mf
* Prepare for large file uploading
* Implement chunk upload
* Fix file uploading exceeding content size
* Fix wrong field type
* Add `temp=true` to all chunk upload calls
* Add macro to enable test api
* Merge branch 'main' into dev/simplyprint-improve
* Fix another missing `temp=true`
* Add delete token
* Try fixing build error on *nix systems
* Merge branch 'main' into dev/simplyprint-improve
* Merge branch 'main' into dev/simplyprint-improve
* Merge remote-tracking branch 'remote/main' into dev/simplyprint-improve
# Conflicts:
# src/slic3r/GUI/BackgroundSlicingProcess.cpp
* Move the `bbl_use_print_host_webui` option to print host dialog. Also make it a derived option of `print_host_webui` instead.
* Merge branch 'main' into dev/simplyprint-improve
# Conflicts:
# src/slic3r/GUI/MainFrame.cpp
# src/slic3r/GUI/Plater.cpp
* Merge branch 'main' into dev/simplyprint-improve
# Conflicts:
# src/slic3r/GUI/Plater.cpp
* Use a more generic option instead of SimplyPrint specific
* Merge branch 'main' into dev/simplyprint-improve
* Merge branch 'main' into dev/simplyprint-improve
