761db8537e
Update error message to make it a bit more informative ( #2249 )
2023-09-29 23:39:58 +08:00
ee0e6a7227
Port "Extend sparse infill" from Prusa ( #2134 )
...
* Remove BambuLab's implementation of solid infill bridging enhancement
, will use Prusa's instead
* Port "Extend sparse infill" from Prusa
* Improve anchoring by shifting the lines half-spacing
* Add missing fill patterns
* Improve anchoring by keeping fine details
* Make sure the opposite directions do not cancel each other
---------
Co-authored-by: Pavel Mikus <pavel.mikus.mail@seznam.cz >
2023-09-29 23:39:12 +08:00
3433e7bfa0
Fix build warnings on windows, fix various bugs/logic errors/missing returns/etc, update boost::bind ( #2229 )
...
Fix build warnings on windows, fix various bugs/logic errors/missing returns/etc, update boost::bind.
2023-09-27 23:55:23 +08:00
cf846195cc
Porting of Pressure Equalizer feature from Prusa Slicer 2.6.x ( #2161 )
...
* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
* Initial commit of code from Prusa Slicer 2.6.1
* Ported ExtrusionRole from Prusa Slicer 2.6.1
* fix compile errors
* Update GCode.hpp
* code changes to invoke pressure equalizer
* attempting to trigger pressure equalizer
(Not compiling)
* Update Fill.cpp
* Update Fill.cpp
* Pressure equaliser layer result update
* Further commits
* Merged PR https://github.com/prusa3d/PrusaSlicer/pull/9622
* First complete working version
* Update PressureEqualizer.cpp
* Implemented parameter in GUI
* Toggle fields according to compatibility
* Updated UI toggles between extrusion rate slope and arc fitting.
* Updated tooltip
* Introduced parameter smoothing segment length
This parameter influences the number of division a line will undergo in response to the requirement to adhere to the extrusion rate flow adjustment.
* Internal parameter and tool tip tweaking
* Parameter and tool tip tweaking
* Updated parameters and tooltip following testing.
* Sync PressureEq with latest PrusaSlicer
* Revert "Sync PressureEq with latest PrusaSlicer"
This reverts commit 131fb94c6bebe0a6abb3ca28d4a162aacbe75f40.
---------
Co-authored-by: MGunlogson <MGunlogson@users.noreply.github.com >
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com >
2023-09-27 21:44:45 +08:00
33f91c026a
Hide purge tower preview in case of no tool changes
2023-09-25 23:17:56 +08:00
f06b7cb526
QoL: improve PA Line method
...
Signed-off-by: SoftFever <softfeverever@gmail.com >
2023-09-25 20:39:02 +08:00
7ef43f6849
Various support improvements and bugfixes ( #2202 )
...
* Organic supports: Added check for variable layer height, with which
Organic supports are not compatible.
Fixes prusa3d/PrusaSlicer#9528 and similar.
Check the object max Z against build volume Z in Print::validate().
Cherry-picked from prusa3d/PrusaSlicer@5b94971
* Fix crash with default tree support
* Show "support_critical_regions_only" only when using auto normal tree supports (#2195 )
* Fix organic tree check
---------
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com >
2023-09-24 22:58:04 +08:00
685e058c35
Parallelized PrintObject::bridge_over_infill() ( #2132 )
...
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com >
2023-09-17 11:22:11 +08:00
61437b2c76
Detection of curled edges to enhance slowdown for overhangs algorithm ( #2056 )
...
* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
---------
Co-authored-by: SoftFever <softfeverever@gmail.com >
2023-09-16 22:24:18 +08:00
e6269dd852
tweak default organic tree settings.
2023-09-13 20:10:33 +08:00
40c2eccfd6
handle edge cases when Cooling tube position is 0
2023-09-12 20:12:54 +08:00
0b3dfa3f45
Overhang improvement max vol speed
2023-09-10 11:39:29 +08:00
f2da5b39a1
Fix GCode viewer first layer height in vase mode ( #2051 )
...
Follow-up of 6be84d529d740c44c1e9bf533e70e167b3442063 - Fixed processing of spiral vase mode in GCodeProcessor::process_G1
Co-authored-by: enricoturri1966 <enricoturri@seznam.cz >
2023-09-10 11:38:37 +08:00
5269e3a2cd
small tweaks
2023-09-09 17:47:25 +08:00
9246f01fea
Merge branch 'purge_tower'
2023-09-09 13:20:32 +08:00
e624632969
semm
2023-09-09 13:19:59 +08:00
ee4705d6b7
Wipe tower: changed the way how initial wipe tower preview depth is calculated
2023-09-09 13:19:43 +08:00
cd3bbdb5f5
estimate tower size
2023-09-09 13:19:43 +08:00
6ff9ff03db
wip
2023-09-09 13:19:43 +08:00
aae647fc19
Properly pasrse toolchange
2023-09-09 13:14:10 +08:00
309b218a58
klipper object exclusion name fix
2023-09-09 11:04:45 +08:00
adf65ceeb8
wipe improvment
2023-09-09 11:04:45 +08:00
c20b01f37a
Updated inner outer inner algorithm to cater for edge case where an internal island with two perimeters on both sides of an external wall was causing a secondary island to not reorder the walls correctly ( #1861 )
...
* Updated inner outer inner algorithm to cater for edge case where an internal island with multiple internal perimeters would cause the external island to fall back to outer-> inner wall ordering.
Updated inner outer inner algorithm to cater for edge case where an internal island with multiple internal perimeters would cause the external island to fall back to outer-> inner wall ordering.
* Reworked the inner outer inner algorithm to better work with more than 3 perimeters.
* Code comment updates. Removed error check code.
* Cleaned up code and comments
Cleaned up code and comments
* Disabled inner outer inner algorithm on first layer
Disabling inner outer inner algorithm and using inner to outer wall ordering to promote bed adhesion as having isolated perimeters on the bed has resulted on occasion to warping or incomplete adherence to the bed.
* Code optimisation
2023-09-09 10:56:03 +08:00
5cef22ee66
klipper object exclusion name fix
2023-09-08 00:01:22 +08:00
75328a2de8
wipe improvment
2023-09-08 00:01:22 +08:00
4011a0d748
Fix double quotes escape ( #1397 #1435 #1946 #1990 ) ( #2002 )
2023-09-05 20:18:43 +08:00
9e0dbd91ff
Add option to enforce first layer min wall width ( #1974 )
...
Add option to set first layer min wall width
2023-09-04 00:07:40 +08:00
f9abebac22
Fix "unknown vector variable type" error when using bambu filament ch… ( #1982 )
...
* Fix "unknown vector variable type" error when using bambu filament change ( #1979 )
* Update comment
2023-09-03 14:49:54 +08:00
1fdfc2fa45
Fix raft size when non-organic tree support is enabled ( #1973 )
2023-09-03 00:43:28 +08:00
a1464735ce
Initial port of organic tree support from PrusaSlicer ( #1938 )
...
* Initial port of organic tree support from PrusaSlicer
* Port missing Organic support parameters from PrusaSlicer
* Update parameter naming
* Reorganize the `raft_first_layer_expansion` and `raft_first_layer_density` parameters as they are not only used by rafts
* Reset support style only in simple mode
* Sync latest update from PrusaSlicer & copyrights
* Fix organic tree support crash with invalid parameters
---------
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com >
2023-09-02 17:29:43 +08:00
9bf8cbc7de
update locale and default filament color
2023-08-31 21:53:12 +08:00
a63ddc33e2
Fix Linux build errors
2023-08-31 20:35:43 +08:00
33ac24d35a
Support Marlin 2
2023-08-30 23:39:00 +08:00
702ad817e5
update Prusa profiles
2023-08-30 23:38:46 +08:00
4564945b48
support profile notes
2023-08-30 23:38:09 +08:00
0c3802ac4c
GCodeGenerator / custom G-codes: Added new read/only options providing
...
the amount of total extruded material and per extruder extruded material
up to the point the value is evaluated:
"extruded_volume", "extruded_weight",
"extruded_volume_total", "extruded_weight_total"
2023-08-30 23:37:51 +08:00
05194ab1f4
PlaceholderParser: new interpolate_table() "function"
...
interpolate_table(x, (x0, y0), (x1, y1), (x2, y2), ...)
interpolates a table at position x.
2023-08-30 23:37:30 +08:00
b9ca1c8720
Port overhang extra perimeters from PrusaSlicer ( #1939 )
...
* Port overhang extra perimeters from PrusaSlicer
* Reduce duplicated code
* Add credits
---------
Co-authored-by: SoftFever <softfeverever@gmail.com >
Co-authored-by: PavelMikus <pavel.mikus.mail@seznam.cz >
2023-08-28 19:56:09 +08:00
15d3aa646e
Fixed errors after cherry picking Prusalink related commits
...
Add Prusa MK4 profile (working, but more work to do)
2023-08-28 00:01:13 +08:00
96a8f92b65
Fixed an issue that EXCLUDE_OBJECT_DEFINE info was written into gcode file regardless
2023-08-27 23:57:42 +08:00
b636be8852
mk4 profiles
2023-08-27 23:37:43 +08:00
9bab2e2efa
fix errors after cherry picking commits
2023-08-27 22:44:37 +08:00
9df97e004d
Upload changes
...
PrusaLink: Use PUT or POST based on information read during test connection (upload-by-put). If put - do additional GET for storage_list and let user to choose where to upload or show name if only 1 is possible. Allow PrusaLink for MK2.5 and MK2.5S.
PrusaConnect: New host type PrusaConnect inherited from PrusaLink class with filled host address, disabled http diggest. After upload read header information - status message and pass it to notification and Printhost upload dialog via events, this message can be shown as warning notification and is recieved in localized lang. Pass accept-language shortcut in upload header. 3 option to upload. (upload, to queue, to print)
Upload Notification: Showing status text, changes in text, not showing close button, Completed state on special call (not 100%) and other design changes.
Right panel: Open URL button.
2023-08-27 18:07:48 +08:00
17811c997b
Add option in the CTRL-M dialog to invert axes ( #1928 )
...
Some people prefer their axes inverted when using a spacemouse.
This this, you can invert any set of axes you want.
2023-08-27 11:29:46 +08:00
012f113eae
misc fixes
2023-08-27 11:28:01 +08:00
aa4c042855
micro refactor vender type
2023-08-27 11:01:52 +08:00
2a478ab4f9
post changes after merging BS1.7.4
...
Remove tracking etc..
2023-08-26 18:45:43 +08:00
e65b11a831
Merge remote-tracking branch 'BS/v1.7.2'
...
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com >
# Conflicts:
# .github/ISSUE_TEMPLATE/bug_report.md
# .github/workflows/build_ubuntu.yml
# .gitignore
# Containerfile
# Dockerfile
# README.md
# deps/Boost/Boost.cmake
# deps/OpenEXR/OpenEXR.cmake
# deps/OpenVDB/OpenVDB.cmake
# doc/How to build - Mac OS.md
# localization/i18n/OrcaSlicer.pot
# localization/i18n/de/OrcaSlicer_de.po
# localization/i18n/en/OrcaSlicer_en.po
# localization/i18n/es/OrcaSlicer_es.po
# localization/i18n/fr/OrcaSlicer_fr.po
# localization/i18n/hu/OrcaSlicer_hu.po
# localization/i18n/it/OrcaSlicer_it.po
# localization/i18n/ja/OrcaSlicer_ja.po
# localization/i18n/list.txt
# localization/i18n/nl/OrcaSlicer_nl.po
# localization/i18n/sv/OrcaSlicer_sv.po
# localization/i18n/zh_cn/OrcaSlicer_zh_CN.po
# resources/i18n/de/BambuStudio.mo
# resources/i18n/en/BambuStudio.mo
# resources/i18n/es/BambuStudio.mo
# resources/i18n/fr/BambuStudio.mo
# resources/i18n/hu/BambuStudio.mo
# resources/i18n/it/BambuStudio.mo
# resources/i18n/ja/BambuStudio.mo
# resources/i18n/nl/BambuStudio.mo
# resources/i18n/sv/BambuStudio.mo
# resources/i18n/zh_cn/BambuStudio.mo
# resources/images/im_all_plates_stats.svg
# resources/profiles/Anker.json
# resources/profiles/Anker/filament/Generic ASA @Anker.json
# resources/profiles/Anker/filament/Generic PA @Anker.json
# resources/profiles/Anker/filament/Generic PA-CF @Anker.json
# resources/profiles/Anker/filament/Generic PC @Anker.json
# resources/profiles/Anker/filament/Generic PETG @Anker.json
# resources/profiles/Anker/filament/Generic PLA-CF @Anker.json
# resources/profiles/Anker/filament/Generic PVA @Anker.json
# resources/profiles/Anker/filament/Generic TPU @Anker.json
# resources/profiles/Anker/machine/Anker M5 0.4 nozzle.json
# resources/profiles/Anker/machine/Anker M5.json
# resources/profiles/Anker/machine/Anker M5C 0.4 nozzle.json
# resources/profiles/Anker/machine/Anker M5C.json
# resources/profiles/Anker/machine/fdm_machine_common.json
# resources/profiles/Anker/process/0.05mm Ultradetail @Anker.json
# resources/profiles/Anker/process/0.15mm Fast @Anker.json
# resources/profiles/Anker/process/0.20mm Fast @Anker.json
# resources/profiles/Anker/process/0.20mm Standard @Anker.json
# resources/profiles/Anker/process/0.25mm Fast @Anker.json
# resources/profiles/Anker/process/fdm_process_common.json
# resources/profiles/Anycubic.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro 2 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro 2.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro.json
# resources/profiles/Anycubic/machine/Anycubic Chiron 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Chiron.json
# resources/profiles/Anycubic/machine/Anycubic Kobra 2 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Kobra Max 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Kobra Max.json
# resources/profiles/Anycubic/machine/Anycubic Vyper 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Vyper.json
# resources/profiles/Anycubic/machine/Anycubic i3 Mega S 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic i3 Mega S.json
# resources/profiles/Anycubic/machine/fdm_machine_common.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json
# resources/profiles/Anycubic/process/fdm_process_common.json
# resources/profiles/BBL.json
# resources/profiles/BBL/process/fdm_process_bbl_common.json
# resources/profiles/Creality.json
# resources/profiles/Creality/filament/fdm_filament_abs.json
# resources/profiles/Creality/filament/fdm_filament_pla.json
# resources/profiles/Creality/machine/Creality CR-10 Max 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality CR-10 Max.json
# resources/profiles/Creality/machine/Creality CR-10 V2 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality CR-10 V2.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 Pro 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 Pro.json
# resources/profiles/Creality/machine/Creality Ender-3 S1.json
# resources/profiles/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 V2.json
# resources/profiles/Creality/machine/Creality Ender-5 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 Plus.json
# resources/profiles/Creality/machine/Creality Ender-5 S1 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 S1.json
# resources/profiles/Creality/machine/Creality Ender-5.json
# resources/profiles/Creality/machine/Creality Ender-5S 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5S.json
# resources/profiles/Creality/machine/Creality Ender-6 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-6.json
# resources/profiles/Creality/machine/fdm_creality_common.json
# resources/profiles/Creality/machine/fdm_machine_common.json
# resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json
# resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json
# resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json
# resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json
# resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json
# resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json
# resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json
# resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json
# resources/profiles/Creality/process/0.24mm Draft @Creality.json
# resources/profiles/Creality/process/fdm_process_creality_common.json
# resources/profiles/Custom/filament/My Generic PETG.json
# resources/profiles/Custom/filament/My Generic PLA.json
# resources/profiles/Elegoo.json
# resources/profiles/Elegoo/filament/fdm_filament_common.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2D 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2D.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2S 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2S.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Max 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Max.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Plus 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Plus.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Pro 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Pro.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3.json
# resources/profiles/Elegoo/machine/Elegoo Neptune X 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune X.json
# resources/profiles/Elegoo/machine/Elegoo Neptune.json
# resources/profiles/Elegoo/machine/fdm_machine_common.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo NeptuneX.json
# resources/profiles/Prusa.json
# resources/profiles/Prusa/filament/fdm_filament_common.json
# resources/profiles/Prusa/machine/Prusa MINI 0.4 nozzle.json
# resources/profiles/Prusa/machine/Prusa MINI.json
# resources/profiles/Prusa/machine/Prusa MK3S 0.4 nozzle.json
# resources/profiles/Prusa/machine/Prusa MK3S.json
# resources/profiles/Prusa/machine/fdm_machine_common.json
# resources/profiles/Prusa/process/0.20mm Standard @MINI.json
# resources/profiles/Prusa/process/0.20mm Standard @MK3S.json
# resources/profiles/Qidi.json
# resources/profiles/Qidi/filament/fdm_filament_abs.json
# resources/profiles/Qidi/filament/fdm_filament_asa.json
# resources/profiles/Qidi/filament/fdm_filament_common.json
# resources/profiles/Qidi/filament/fdm_filament_pa.json
# resources/profiles/Qidi/filament/fdm_filament_pc.json
# resources/profiles/Qidi/filament/fdm_filament_pet.json
# resources/profiles/Qidi/filament/fdm_filament_pla.json
# resources/profiles/Qidi/filament/fdm_filament_pva.json
# resources/profiles/Qidi/filament/fdm_filament_tpu.json
# resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-CF Pro.json
# resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Max 3.json
# resources/profiles/Qidi/machine/Qidi X-Max.json
# resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Plus 3.json
# resources/profiles/Qidi/machine/Qidi X-Plus.json
# resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Smart 3.json
# resources/profiles/Qidi/machine/fdm_machine_common.json
# resources/profiles/Qidi/machine/fdm_qidi_common.json
# resources/profiles/Qidi/machine/fdm_qidi_x3_common.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax3.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax3.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax3.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json
# resources/profiles/Qidi/process/fdm_process_common.json
# resources/profiles/Qidi/process/fdm_process_qidi_common.json
# resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json
# resources/profiles/Tronxy/filament/Tronxy Generic ABS.json
# resources/profiles/Tronxy/process/0.12mm Fine @Tronxy.json
# resources/profiles/Tronxy/process/0.15mm Optimal @Tronxy.json
# resources/profiles/Tronxy/process/0.20mm Standard @Tronxy.json
# resources/profiles/Tronxy/process/0.24mm Draft @Tronxy.json
# resources/profiles/Voron.json
# resources/profiles/Voron/filament/Generic ABS @Voron.json
# resources/profiles/Voron/filament/Generic ASA @Voron.json
# resources/profiles/Voron/filament/Generic PA @Voron.json
# resources/profiles/Voron/filament/Generic PETG @Voron.json
# resources/profiles/Voron/filament/Generic PVA @Voron.json
# resources/profiles/Voron/filament/Voron Generic PA-CF.json
# resources/profiles/Voron/filament/Voron Generic PC.json
# resources/profiles/Voron/filament/Voron Generic PLA-CF.json
# resources/profiles/Voron/filament/Voron Generic PLA.json
# resources/profiles/Voron/filament/Voron Generic TPU.json
# resources/profiles/Voron/machine/Voron 0.1.json
# resources/profiles/Voron/machine/Voron 2.4 250.json
# resources/profiles/Voron/machine/Voron 2.4 300.json
# resources/profiles/Voron/machine/Voron 2.4 350.json
# resources/profiles/Voron/machine/Voron Trident 250.json
# resources/profiles/Voron/machine/Voron Trident 300.json
# resources/profiles/Voron/machine/Voron Trident 350.json
# resources/profiles/Voron/process/fdm_process_voron_common.json
# resources/profiles/Voxelab.json
# resources/profiles/Voxelab/filament/Generic ABS @Voxelab.json
# resources/profiles/Voxelab/filament/Generic PLA @Voxelab.json
# resources/profiles/Voxelab/filament/fdm_filament_common.json
# resources/profiles/Voxelab/machine/Voxelab Aquila X2 0.4 nozzle.json
# resources/profiles/Voxelab/machine/Voxelab Aquila X2.json
# resources/profiles/Voxelab/machine/fdm_machine_common.json
# resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json
# resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json
# resources/web/data/text.js
# resources/web/guide/21/21.js
# resources/web/guide/24/24.js
# src/BaseException.cpp
# src/OrcaSlicer.cpp
# src/libslic3r/AppConfig.cpp
# src/libslic3r/BoundingBox.hpp
# src/libslic3r/Extruder.hpp
# src/libslic3r/Fill/Fill.cpp
# src/libslic3r/Format/bbs_3mf.cpp
# src/libslic3r/GCode.cpp
# src/libslic3r/GCode.hpp
# src/libslic3r/GCode/CoolingBuffer.cpp
# src/libslic3r/GCode/GCodeProcessor.cpp
# src/libslic3r/GCode/GCodeProcessor.hpp
# src/libslic3r/GCode/WipeTower.cpp
# src/libslic3r/GCodeWriter.cpp
# src/libslic3r/GCodeWriter.hpp
# src/libslic3r/Model.cpp
# src/libslic3r/PerimeterGenerator.cpp
# src/libslic3r/Preset.cpp
# src/libslic3r/Preset.hpp
# src/libslic3r/PresetBundle.cpp
# src/libslic3r/PresetBundle.hpp
# src/libslic3r/Print.cpp
# src/libslic3r/Print.hpp
# src/libslic3r/PrintBase.hpp
# src/libslic3r/PrintConfig.cpp
# src/libslic3r/PrintConfig.hpp
# src/libslic3r/PrintObject.cpp
# src/libslic3r/TreeSupport.cpp
# src/libslic3r/Utils.hpp
# src/mcut/CMakeLists.txt
# src/slic3r/CMakeLists.txt
# src/slic3r/GUI/3DBed.cpp
# src/slic3r/GUI/AMSMaterialsSetting.cpp
# src/slic3r/GUI/AMSMaterialsSetting.hpp
# src/slic3r/GUI/BBLTopbar.cpp
# src/slic3r/GUI/BBLTopbar.hpp
# src/slic3r/GUI/BackgroundSlicingProcess.hpp
# src/slic3r/GUI/BindDialog.cpp
# src/slic3r/GUI/ConfigManipulation.cpp
# src/slic3r/GUI/DeviceManager.cpp
# src/slic3r/GUI/Field.cpp
# src/slic3r/GUI/GLCanvas3D.cpp
# src/slic3r/GUI/GUI_App.cpp
# src/slic3r/GUI/GUI_App.hpp
# src/slic3r/GUI/GUI_Factories.cpp
# src/slic3r/GUI/GUI_Factories.hpp
# src/slic3r/GUI/GUI_ObjectList.cpp
# src/slic3r/GUI/Gizmos/GLGizmoMeshBoolean.cpp
# src/slic3r/GUI/Jobs/ArrangeJob.cpp
# src/slic3r/GUI/Jobs/FillBedJob.cpp
# src/slic3r/GUI/MainFrame.cpp
# src/slic3r/GUI/MediaPlayCtrl.cpp
# src/slic3r/GUI/Monitor.cpp
# src/slic3r/GUI/PartPlate.cpp
# src/slic3r/GUI/PartPlate.hpp
# src/slic3r/GUI/PlateSettingsDialog.cpp
# src/slic3r/GUI/PlateSettingsDialog.hpp
# src/slic3r/GUI/Plater.cpp
# src/slic3r/GUI/Plater.hpp
# src/slic3r/GUI/PresetComboBoxes.cpp
# src/slic3r/GUI/ReleaseNote.cpp
# src/slic3r/GUI/SelectMachine.cpp
# src/slic3r/GUI/StatusPanel.cpp
# src/slic3r/GUI/Tab.cpp
# src/slic3r/GUI/Widgets/Label.cpp
# src/slic3r/GUI/Widgets/Label.hpp
# src/slic3r/GUI/Widgets/SideButton.cpp
# src/slic3r/GUI/calib_dlg.cpp
# src/slic3r/GUI/calib_dlg.hpp
# src/slic3r/GUI/wxExtensions.hpp
# src/slic3r/Utils/NetworkAgent.cpp
# src/slic3r/Utils/bambu_networking.hpp
# version.inc
2023-08-26 16:13:57 +08:00
dee6120c34
fix missing bottom surface in viewer ( #1899 )
...
* Update Korean translation
* 1. Fix blank button text after translation
2. Fix some mistranslated korean
* -fix bottom surface in gcode viewer
-update korean translation
2023-08-24 07:48:59 +08:00
5072bf3d16
update locale
2023-08-22 19:25:21 +08:00
