08a94681ca
minor change: use [bed_temperature_initial_layer_single] instead of [hot_plate_temp_initial_layer] for some profiles
2023-05-10 22:48:12 +08:00
382dd9b4c2
Start code correction for Creality, Voxelab, Sovol & Elegoo printers ( #1021 )
...
* Adding more Elegoo printer profiles
Elegoo Neptune X
Elegoo Neptune 2
Elegoo Neptune 2S
Elegoo Neptune 2D
* add ultimaker 2 profile
* Error corrections in the G-code
Error Correction of the start codes, so that no error message appears any more.
* Change G-Code Parameter
2023-05-10 22:28:10 +08:00
c81ca8c9d7
profile cover image reorg
2023-05-07 23:52:11 +08:00
a14943665b
Revise and add new Creality profiles & Fix SecKit Filaments ( #974 )
...
* Revise and add new Creality profiles
* Correction of SecKit filaments
* Add Creality Ender-3 S1 Pro Profile & change snapmaker printer images
* Revision of the printer Creality & SecKit Printer ID
2023-05-07 22:50:18 +08:00
ac73fd702f
Merge pull request #839 from TonyK54/Ender5Pro-Profile
...
Adding Ender 5 Pro
2023-04-26 20:09:25 +08:00
162f7d2ac3
optimized hot end model
2023-04-24 18:04:47 +08:00
2e5c648be7
set z hop type to Normal by default
2023-03-29 23:38:08 +08:00
da57260101
change default slow_down_min_speed to 10
2023-03-14 21:30:45 +08:00
5ef51f6c8a
Merge branch 'master-remote' into feature/1.5
...
Signed-off-by: SoftFever <softfeverever@gmail.com >
# Conflicts:
# bbl/i18n/BambuStudio.pot
# bbl/i18n/de/BambuStudio_de.po
# bbl/i18n/en/BambuStudio_en.po
# bbl/i18n/es/BambuStudio_es.po
# bbl/i18n/fr/BambuStudio_fr.po
# bbl/i18n/hu/BambuStudio_hu.po
# bbl/i18n/it/BambuStudio_it.po
# bbl/i18n/nl/BambuStudio_nl.po
# bbl/i18n/sv/BambuStudio_sv.po
# bbl/i18n/zh_cn/BambuStudio_zh_CN.po
# deps/Boost/Boost.cmake
# deps/wxWidgets/wxWidgets.cmake
# resources/config.json
# resources/i18n/de/BambuStudio.mo
# resources/i18n/en/BambuStudio.mo
# resources/i18n/es/BambuStudio.mo
# resources/i18n/fr/BambuStudio.mo
# resources/i18n/hu/BambuStudio.mo
# resources/i18n/it/BambuStudio.mo
# resources/i18n/nl/BambuStudio.mo
# resources/i18n/sv/BambuStudio.mo
# resources/i18n/zh_cn/BambuStudio.mo
# resources/images/tips_arrow.svg
# resources/profiles/Anycubic.json
# resources/profiles/Anycubic/filament/Anycubic Generic ABS.json
# resources/profiles/Anycubic/filament/Anycubic Generic ASA.json
# resources/profiles/Anycubic/filament/Anycubic Generic PA-CF.json
# resources/profiles/Anycubic/filament/Anycubic Generic PA.json
# resources/profiles/Anycubic/filament/Anycubic Generic PC.json
# resources/profiles/Anycubic/filament/Anycubic Generic PETG.json
# resources/profiles/Anycubic/filament/Anycubic Generic PLA-CF.json
# resources/profiles/Anycubic/filament/Anycubic Generic PLA.json
# resources/profiles/Anycubic/filament/Anycubic Generic PVA.json
# resources/profiles/Anycubic/filament/Anycubic Generic TPU.json
# resources/profiles/Anycubic/filament/fdm_filament_common.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro.json
# resources/profiles/Anycubic/process/0.20mm Standard @4MaxPro.json
# resources/profiles/Anycubic/process/fdm_process_common.json
# resources/profiles/BBL.json
# resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json
# resources/profiles/BBL/machine/fdm_bbl_3dp_001_common.json
# resources/profiles/Voron.json
# resources/web/data/text.js
# resources/web/image/printer/Anycubic 4Max Pro_cover.png
# src/BambuStudio.cpp
# src/libslic3r/GCode.cpp
# src/libslic3r/GCode.hpp
# src/libslic3r/GCode/GCodeProcessor.cpp
# src/libslic3r/GCodeWriter.hpp
# src/libslic3r/PerimeterGenerator.cpp
# src/libslic3r/PresetBundle.cpp
# src/libslic3r/Print.cpp
# src/libslic3r/Print.hpp
# src/libslic3r/PrintConfig.cpp
# src/libslic3r/PrintConfig.hpp
# src/libslic3r/PrintObject.cpp
# src/slic3r/GUI/AMSMaterialsSetting.cpp
# src/slic3r/GUI/AMSMaterialsSetting.hpp
# src/slic3r/GUI/AmsMappingPopup.cpp
# src/slic3r/GUI/AmsMappingPopup.hpp
# src/slic3r/GUI/Auxiliary.cpp
# src/slic3r/GUI/BackgroundSlicingProcess.cpp
# src/slic3r/GUI/ConfigManipulation.cpp
# src/slic3r/GUI/DeviceManager.cpp
# src/slic3r/GUI/DeviceManager.hpp
# src/slic3r/GUI/ExtrusionCalibration.cpp
# src/slic3r/GUI/GCodeViewer.cpp
# src/slic3r/GUI/GCodeViewer.hpp
# src/slic3r/GUI/GUI_App.cpp
# src/slic3r/GUI/IMSlider.cpp
# src/slic3r/GUI/Jobs/PrintJob.cpp
# src/slic3r/GUI/Jobs/PrintJob.hpp
# src/slic3r/GUI/Jobs/SendJob.cpp
# src/slic3r/GUI/Jobs/SendJob.hpp
# src/slic3r/GUI/MainFrame.cpp
# src/slic3r/GUI/MainFrame.hpp
# src/slic3r/GUI/MediaPlayCtrl.cpp
# src/slic3r/GUI/OptionsGroup.cpp
# src/slic3r/GUI/PhysicalPrinterDialog.cpp
# src/slic3r/GUI/Plater.cpp
# src/slic3r/GUI/PrintHostDialogs.cpp
# src/slic3r/GUI/Printer/BambuTunnel.h
# src/slic3r/GUI/Printer/PrinterFileSystem.cpp
# src/slic3r/GUI/Printer/gstbambusrc.c
# src/slic3r/GUI/Printer/gstbambusrc.h
# src/slic3r/GUI/ReleaseNote.cpp
# src/slic3r/GUI/ReleaseNote.hpp
# src/slic3r/GUI/SelectMachine.cpp
# src/slic3r/GUI/SendToPrinter.cpp
# src/slic3r/GUI/SetBedTypeDialog.cpp
# src/slic3r/GUI/StatusPanel.cpp
# src/slic3r/GUI/StatusPanel.hpp
# src/slic3r/GUI/Tab.cpp
# src/slic3r/GUI/Widgets/AMSControl.cpp
# src/slic3r/GUI/Widgets/AMSControl.hpp
# src/slic3r/GUI/Widgets/ImageSwitchButton.cpp
# src/slic3r/GUI/Widgets/Label.cpp
# src/slic3r/GUI/WipeTowerDialog.cpp
# src/slic3r/Utils/Process.cpp
# src/slic3r/Utils/bambu_networking.hpp
# version.inc
2023-03-08 00:08:26 +08:00
cbb84d2fb6
ENH: support filament_z_hop_types
...
Support override z top type in filament
This is handling for STUDIO-2082
Change-Id: I885d1d5e44d626e28b260ff569d0359e462a5f8d
2023-02-22 20:09:17 +08:00
260156648d
Merge branch 'master-remote' into SoftFever
...
# Conflicts:
# bbl/i18n/BambuStudio.pot
# bbl/i18n/de/BambuStudio_de.po
# bbl/i18n/en/BambuStudio_en.po
# bbl/i18n/es/BambuStudio_es.po
# bbl/i18n/fr/BambuStudio_fr.po
# bbl/i18n/hu/BambuStudio_hu.po
# bbl/i18n/nl/BambuStudio_nl.po
# bbl/i18n/sv/BambuStudio_sv.po
# bbl/i18n/zh_cn/BambuStudio_zh_CN.po
# resources/i18n/de/BambuStudio.mo
# resources/i18n/en/BambuStudio.mo
# resources/i18n/es/BambuStudio.mo
# resources/i18n/fr/BambuStudio.mo
# resources/i18n/hu/BambuStudio.mo
# resources/i18n/nl/BambuStudio.mo
# resources/i18n/sv/BambuStudio.mo
# resources/i18n/zh_cn/BambuStudio.mo
# resources/profiles/BBL.json
# resources/profiles/Creality.json
# resources/profiles/Voron.json
# src/libslic3r/PrintConfig.cpp
# src/libslic3r/TreeSupport.cpp
# src/slic3r/GUI/DeviceManager.cpp
# src/slic3r/GUI/ReleaseNote.cpp
# version.inc
2022-12-31 15:15:58 +08:00
45b40fd380
add Creality CR-10 Max
...
#46
2022-12-30 16:54:10 +08:00
8d482eddd3
fix profile syncing issue
...
#74
2022-12-30 15:45:15 +08:00
29dbc77e91
NEW: add new tree support style "Tree Slim"
...
1. Add a new style "Tree Slim". If enabled, tree
support branches are merged more aggressively, and the support volume
is minimized.
2. Enable support style, add back Snug for normal support.
3. Remove hybrid(auto) type and use "Tree Hybrid" style to represent it.
4. Fix a bug in plan_layer_heights that may generate empty layers when
layer height is set to 0.3mm.
5. Fix a bug where no raft is generated if there is no overhang.
6. Fix the bug where no bottom interface or bottom gap is generated when
tree slim is selected.
7. Use physical distance to calc radius
Change-Id: Iacd57018ae5496cdc9acd28551c44d1c88c53fe0
2022-12-26 05:31:54 -05:00
57b4f3cf68
change default wall loop to 3
...
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com >
2022-12-20 11:32:54 +08:00
bf8a9fee1f
Merge branch 'master' into SoftFever
...
# Conflicts:
# bbl/i18n/zh_cn/BambuStudio_zh_CN.po
# resources/i18n/de/BambuStudio.mo
# resources/i18n/en/BambuStudio.mo
# resources/i18n/es/BambuStudio.mo
# resources/i18n/fr/BambuStudio.mo
# resources/i18n/hu/BambuStudio.mo
# resources/i18n/nl/BambuStudio.mo
# resources/i18n/sv/BambuStudio.mo
# resources/i18n/zh_cn/BambuStudio.mo
# resources/profiles/Creality.json
# resources/profiles/Voron.json
# resources/web/guide/3/index.html
# src/libslic3r/AppConfig.cpp
# src/libslic3r/GCode.cpp
# src/libslic3r/GCode/GCodeProcessor.cpp
# src/libslic3r/LayerRegion.cpp
# src/libslic3r/Preset.cpp
# src/libslic3r/Print.cpp
# src/libslic3r/PrintConfig.cpp
# src/libslic3r/PrintConfig.hpp
# src/libslic3r/PrintObject.cpp
# src/slic3r/GUI/AboutDialog.cpp
# src/slic3r/GUI/BBLTopbar.cpp
# src/slic3r/GUI/ConfigManipulation.cpp
# src/slic3r/GUI/ConfigWizard.cpp
# src/slic3r/GUI/GCodeViewer.cpp
# src/slic3r/GUI/GUI_App.cpp
# src/slic3r/GUI/GUI_Factories.cpp
# src/slic3r/GUI/MainFrame.cpp
# src/slic3r/GUI/Plater.cpp
# src/slic3r/GUI/Tab.cpp
# version.inc
2022-12-16 13:59:30 +08:00
8cfee69015
FIX: undef SUPPORT_TREE_DEBUG_TO_SVG and tree support enhance
...
1. undef SUPPORT_TREE_DEBUG_TO_SVG
2. change default tree branch angle to 45 degrees
3. encourage tree neighbors merge faster
4. draw more loops at the top of trees for stronger support
Change-Id: I2edf6a2dddb3b6165c2519ee15e9a7ffaba9de94
(cherry picked from commit 3a9723b2e88a033b3298cd68daf9400265e984a1)
2022-12-15 04:38:15 -05:00
fd3dee6a6d
FIX: remove tree_support_with_infill in 3rd party profiles
...
Change-Id: Ie42a45b90ce14bc27308d66474db074e8bf380da
2022-12-15 04:38:15 -05:00
6ec4e15e6e
tweak ender 3 profile
2022-10-21 00:41:33 +08:00
d47d82bf43
ENH: add preset for ender3 printer
...
As title.
Signed-off-by: salt.wei <salt.wei@bambulab.com >
Change-Id: I2d9b1aaeadfe945a6a90f34cdb10a1f240a50ae4
(cherry picked from commit a223ab23605c3ef96ae878b9c4d2199520b4f201)
2022-10-20 19:34:37 +08:00
