7c48eac832
ENH: config: refine some small logic
...
1. always resize filament count when not matched in full_fff_print
2. remove no-use codes in Preset::normalize
jira: no-jira
Change-Id: Ie15a5977d28f28e0f63ba84f27f98f77d16665c0
(cherry picked from commit f122c4f4ef6f476c4e8190a0872e566d690d6c25)
2025-08-24 23:18:08 +08:00
f021235ceb
FIX: mistake in profiles
...
1.Spelling mistake in long retraction
2.Some params length change to 4
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I8952df7a1bbf060471e24a19eaeddde017d17d82
(cherry picked from commit 7ce2bb70df1b4f45f27e8e91293e1dbf4456956c)
2025-08-24 23:18:08 +08:00
74bf8ad58e
FIX: unable to custom first layer filament order
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I0107ebf6a85ea0deba93ff558835138981365670
(cherry picked from commit e95179427fe31cf3365afdccbaadce84c31407f8)
2025-08-24 23:18:07 +08:00
cc4c03d76f
ENH: add grab length
...
1.During the filament change, the extruder will extrude an extra length
of grap_length for the corresponding detection, so the purge volume can
reduce this length.
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I14f55a3200c1dd48b1603e50280d0c29e1319ebe
(cherry picked from commit 16cadec565f987e6baae97428d5392c1f8e7ad39)
2025-08-24 23:18:07 +08:00
78e7821041
ENH: enable long retraction for multi_extruder
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I41daa7a5f1eabf0a805a86d72d00544c8f4edb4a
(cherry picked from commit 887ca8f45f9b66ea24ca82dc7b84f411f6fe7b59)
2025-08-24 23:18:07 +08:00
a9bec75ea2
ENH: add extruder_ams_count behavior
...
1. save to appconfig and project setting
2. use it to group
jira: none
Change-Id: Id4048fc1b47f6904b2e9c0154aaa3a2b03590437
(cherry picked from commit da32b878b3d7ca95ae5c4786102848c1e8a5ab2d)
2025-08-24 23:18:07 +08:00
c34eb170f1
NEW: Add FilamentMapDialog
...
support drag drop to modify the filament map
jira: none
Change-Id: I0ed3180a0fa8e95e7c871bb039eb844faccd1344
(cherry picked from commit 67f67d76889668fdd80ae5e496b6cbca5f771a43)
2025-08-24 23:18:07 +08:00
d415073b14
ENH: optimize filament group algorithm
...
1.When filament <10, do the reorder with next layer.This can reduce
10% flush in some cases
2.Support custom filament seq
3.Use caches to speed the algorithm
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ie1af9841f7165802d350eae962efe8febafbb357
(cherry picked from commit cffb4a8564844b1892eb42cfe8e883a52e70fb6a)
2025-08-24 23:18:07 +08:00
5a6b215ef0
ENH: add filament group strategy
...
1.When capacity is greater than the num of filaments, always choose the
map result that can be accommodated
2.In BestFit strategy,always try to fill up the existing capacity
3.In BestCost strategy, just try the group with fewest flush
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ifd6d64b77774039e57ffff26cf2243a4d3f89054
(cherry picked from commit cddf8cae27f4320f830b463e92703d3a6cf344e7)
2025-08-24 23:18:06 +08:00
7aa1980813
FIX: fix bug when delete filament
...
update filament of HeightRange
jira: none
Change-Id: I62cb21a65ecdfc36e8bc7d0915a85ecba578e49f
(cherry picked from commit 8232a716e64fcfbd12fc7ebdaeeef4bfde261f66)
2025-08-24 23:18:06 +08:00
0135b251cd
FIX: save filament_maps to slice_info
...
and fix bug when switching printer preset between single-nozzle and double-nozzle, prompt the modification of extruder_count
jira:none
Change-Id: I1d5f0b2f002493378d2f482d08cfd5a72b35b99f
(cherry picked from commit ed9816397374116db37c2a76d11e0216df5aca1d)
2025-08-24 23:18:06 +08:00
df1e125e1d
FIX: compatible with one extruder reorder
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I7e350ba8728ac4b3dd34093ff4e9647d0a2ba671
(cherry picked from commit cc81e57ac947375a525281e7cbf52437c740a746)
2025-08-24 23:18:06 +08:00
400ff4d007
FIX: logic error in filament change
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I7e2b1333d4b82e4495375fcf4daec3aea08be445
(cherry picked from commit 7128e2925a7b75c6e1bee76b739cef8c4fd46c89)
2025-08-24 23:18:06 +08:00
f52dd41b23
ENH: config: remove unused custome_defined logic
...
also improve project_embedded
1. remove unused is_custom_defined
2. improve project_embedded to support multi-extruder diff
jira: no-jira
Change-Id: I1db28c3cfd59ccc31c6855af30305396c71c4e9a
(cherry picked from commit 0434853bf32b063f7850fd4e0c9c3a6045375225)
2025-08-24 23:18:06 +08:00
18e08ec6a1
FIX: Clean up the code
...
1. Refactor recommended code for print by object
2. Calibration adaptation sends print command
jira: none
Change-Id: I24fd92d6aca07a7067e09bb200854e5bec72a324
(cherry picked from commit ad03fae1eba75a866d806a4319ef7edde2fb3562)
2025-08-24 23:18:06 +08:00
c424c63ec9
ENH: alternate multi-head printing sequence
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I739438e8c411b638571d5291f3e5ad3d54650a73
(cherry picked from commit 1ab2964ee3b0357233a0a3747edefc12db51d46c)
2025-08-24 23:18:06 +08:00
aee14d307a
FIX: wrong flush logic
...
1.Fix flush calc logic
2.Rename m_extruder in GCodeWriter
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I38f023fbad983305632ca62cbfb3909759013c25
(cherry picked from commit f1b0805ed13eb94d6eb61e12330db3d628c0241b)
2025-08-24 23:18:05 +08:00
0ad75a223b
ENH: new filament group algorithm
...
1.When n<10, calc all case cost
2.When n>10, first k-medoids algorithm first
3.Enable setting group size
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I625f47e0235c70e440c6d489b052a156fbffca3f
(cherry picked from commit 9ec276d3d7114fff7a33213c3b47ce88df85f2ee)
2025-08-24 23:18:05 +08:00
2ff3b46a7e
FIX: fix build error
...
jira: none
Change-Id: I97df69b728fc3871b7c33e1fd3ba068e741d51c7
(cherry picked from commit 326d7d28b47017bdbd98873a6437ef84116291ba)
2025-08-24 23:18:05 +08:00
48f1d74127
ENH: calib support multi_extruder
...
1. backend support multi_extrude data structure
2. Compatible with third-party calibration
3. fix bug when get extruder in gocde export process
Change-Id: I5dac9abdd9907a521a1ba9b480f9e05640591bc1
(cherry picked from commit 21e6271e59ea8e4924866275566617d14a4b2b6e)
2025-08-24 23:18:05 +08:00
22ce2ebc9a
ENH: config: add the extruder variant apply logic in Print::Apply()
...
we need to keep the original values and update after pre-slice
jira: no-jira
Change-Id: I232d3c43340b4a23bc42121bd05380746e736f20
(cherry picked from commit 7b7ebf1b959ba5c967baff30fb226c808a2e7d44)
2025-08-24 23:18:05 +08:00
c376677537
ENH: enable params with silent mode
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Id46fa5de3a58e0fd3c3b0aa28524a03ca9a38f1a
(cherry picked from commit 3c32b2c5a6587a3fd65d235475faa2e3c4c4726a)
2025-08-24 23:18:05 +08:00
5a00e9c704
FIX: config deep compare & plate config extruder switch
...
Change-Id: Iae1716e6511e252f131ab4355f9521d7611d7133
(cherry picked from commit 7e7e8723667852b34851fc19095f879b975773ba)
2025-08-24 23:18:05 +08:00
fc76348330
FIX: serialize ConfigOptionFloatsOrPercentsNullable
...
Change-Id: I32cf705e6e040f25012a741e6ee20a311a66a7e3
Jira: STUDIO-8040
(cherry picked from commit ef480670ac8da77135d342e7e4dc74c838b5d713)
(cherry picked from commit 0b92ffee351203d3bdef75bb580b13fa009ccb96)
2025-08-24 23:18:03 +08:00
80aa3f1163
ENH: edit object config variant value
...
Change-Id: I97490f555a8a2848ccea78f74d79f71b0e93b36d
(cherry picked from commit 582b2d470f138d5263e689c647347d8bf119b645)
2025-08-24 23:18:03 +08:00
e2c3926c76
ENH: support recommended filament map when print by object
...
1. support recommended filament map when print by object
2. placeholder_parser support function filament_change
3. extruder_id of filament_map is start from 1
Change-Id: Ide8019cd4a165a25972f22706ff685c3005aa031
(cherry picked from commit b42d94e1d05236b8b7b2e65b4a24810eecf040cb)
2025-08-24 23:18:03 +08:00
8db3e3cd54
FIX: backend get the extruder id based on filament_map
...
Change-Id: Ib7679c0fc67336e462467dab9f5b4d4684d6eb19
(cherry picked from commit dcd9fd501354da33baea2adc0f645fabe8880cf1)
2025-08-24 23:18:02 +08:00
fab6b21e4d
FIX: parameters modify of printer preset
...
Ensure correct behavior when modifying parameters of printer preset
Change-Id: Ic627a8e202bf4224b742336cc43ac611ddc5c997
(cherry picked from commit 366a14d8f715cbeca3d0f70a4727d91b6f0ca82e)
2025-08-24 23:18:02 +08:00
a94b0e3dba
ENH: Add recommend filament maps method
...
Change-Id: I3945a8b9f0a57e10a1d230003f21c9877cc5f342
(cherry picked from commit 8c8c9a967b032a270a60e6cf075fe41a6f329e1c)
2025-08-24 23:18:02 +08:00
018f0c0353
ENH: add stride in get_index_for_extruder
...
JIRA: no-jira
Change-Id: If529296bf6d35edc35aee3ff497184dce70332d1
(cherry picked from commit e770043c4d7a3e96acfb27f306853cc339da7529)
2025-08-24 23:18:02 +08:00
aba8c12d07
ENH: add check logic of filament_map when Print::Apply
...
Change-Id: Ibab353c4b16183611d63d75bcdf5f370cb578f21
(cherry picked from commit bbc4d701bf0f492566fb0ebefbf286630ae2136d)
2025-08-24 23:18:02 +08:00
f0e1a7d5c9
ENH: filament: delete filament_extruder_id related logic
...
jira: no jira
Change-Id: Ie0d8e31a6a3eef0400b3ba6238f817bad4daca24
(cherry picked from commit e9081ba8d4013874c972f401b3633942028621b8)
2025-08-24 23:18:02 +08:00
69d0d88da1
ENH: Display and modification of printer presets
...
Change-Id: I6a38704864fd4994a845686a299bec67f1b9b9b3
(cherry picked from commit 5b0d5259571d2b1c629ba7d88101134ec4548708)
2025-08-24 23:18:02 +08:00
141af16fa2
ENH: config: add filament_maps in partplate
...
Change-Id: I1183830788e703f1d33a8a4b620b58b822283dd4
(cherry picked from commit b0e3ab037e3f5af0851539af5ac15b8f96daf548)
2025-08-24 23:18:01 +08:00
fe09c20725
ENH: support delete any filament id
...
Change-Id: I71bcd54985b3f9e19a19d04327d00b402ec22380
(cherry picked from commit f3d67a98ac770e6f045a76bed4531139763b33cf)
2025-08-24 23:18:01 +08:00
84dc2d8835
ENH: flush_volume support multi_extruder and fix bug
...
Change-Id: Id6b041f71ee6e55e68a6937f24ce791caac8e708
(cherry picked from commit 6fbad9ed33b2868a2fffbebdc3a98926431a1093)
2025-08-24 23:18:01 +08:00
57916c7452
FIX: Use the same api to get the extruder id
...
jira: none
Change-Id: I05b3040b176374deee3e95bc52364fe7b33bb257
(cherry picked from commit 8b2544df41456377b09719de15460b19b7c71e09)
2025-08-24 23:18:01 +08:00
cca85fe861
ENH: implement mult extruder params
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com >
Change-Id: I906b106aa4c73272a418528db0e964d9130b0dd7
(cherry picked from commit 8af6f6d13b609b7ed5f25c3b36b966f533054d7b)
2025-08-24 23:18:01 +08:00
d9efd47c90
NEW: config: add logic in config system to support multiple extruder
...
1. add nozzle_volume_type
2. add extruder_variant_list
3. add printer_extruder_variant,print_extruder_variant, filament_extruder_variant
4. construct backend fullprintconfig
Change-Id: I50659634e2cde363112ff5ded6c199d7548c6f2f
(cherry picked from commit 03058ba29dd358acd9726d1c58561e16409e8d04)
2025-08-24 23:18:01 +08:00
bba00b2e7a
ENH: remove the appended T cmd after change filament
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com >
Change-Id: Id5da64626b7343a71dcb38c06f5b5caf43ec40e2
(cherry picked from commit 7da565f0582f470274d279e52daf0dd889f0de7d)
2025-08-24 23:18:00 +08:00
95a5914c26
NEW:add "extruder_only_area" textures for
...
double extruder machine
jira:none
Change-Id: Iaf4118fb00641537838dae7cc5fdaaf07ccc9851
(cherry picked from commit a8d6c9fe8976dbcb79c1f89efb7107073cb17856)
(cherry picked from commit c74a769c14d702dbb78d479e49be927028502037)
2025-08-24 23:17:59 +08:00
b16a6052cb
Feature/re enable tests ( #10503 )
...
* re-enable tests
* Add comprehensive testing guide for OrcaSlicer in CLAUDE.md
* fix build errors on Win
* fix appimage errors
2025-08-24 20:58:18 +08:00
5fa35342fd
Add stl, step, etc. to recent list ( #9481 )
...
* Add stl, step, etc. to recent list
* Make configurable
* Merge branch 'main' into recent-files-pr
2025-08-24 00:24:30 +08:00
883607e1d4
Refactor folder ( #10475 )
...
Move many third-party components' source codes from the src folder to a new folder called deps_src. The goal is to make the code structure clearer and easier to navigate.
2025-08-22 20:02:26 +08:00
6ae89f7d9b
rename 2DHoneycomb and 2DLattice to LateralHoneycomb and LateralLattice ( #10423 )
...
* rename 2DHoneycomb and 2DLattice to LateralHoneycomb and LateralLattice
* more renaming
2025-08-17 23:49:06 +08:00
53440fd390
Don't overwrite config if the new one was not successfully written ( #10284 )
...
* Don't overwrite config if the new one was not successfully written
The errors weren't being checked, now they are.
Fixes #10283
2025-08-11 09:59:01 +08:00
202875a4bb
✨ TPMS-FK Infill ( Triply Periodic Minimal Surface Fischer Koch S) ( #10360 )
...
* seteo inicial
* version inicial
* Update FillTpmsFK.cpp
* marching squares
* Multiline support
* density adjusted
* tuning
cleaning
* symplify points
* optimization
* smoothing
* center offset contour
* icon
* bugfix 1
* reverse tbb scalar field bug fix
* safety
* Update Icon
Co-Authored-By: yw4z <28517890+yw4z@users.noreply.github.com >
* Update FillTpmsFK.cpp
* delete allptpos
---------
Co-authored-by: yw4z <28517890+yw4z@users.noreply.github.com >
Co-authored-by: SoftFever <softfeverever@gmail.com >
2025-08-10 23:10:35 +08:00
4cab501f14
Fix inconsistencies on new translated strings ( #10310 )
...
* Unmark string that don't need to be translated
* Spellcheck
* Fix calibration strings consistency
2025-08-09 23:52:48 +08:00
aacbcab468
Allow default_bed_type to be defined in machine profile
...
update some profiles
2025-08-09 10:51:00 +08:00
f27a40d29b
Remap filament for pre-colored models ( #10303 )
...
* Add a new feature to allow users to remap filament for a pre-painted model.
* Fix the color issues to support the theme
* clean up code
* Fix broken freetype-2.12.1.tar.gz link
2025-08-03 13:28:03 +08:00
