7e51cbcf69
Allow 0.1mm slots. #959 #1056
2013-04-04 01:24:40 +02:00
b4be61b703
Bugfix: time estimates for cooling were computed for each object separately instead of the whole actual layer. #1071
2013-04-04 01:17:44 +02:00
a563801304
Merge branch 'master' of github.com:alexrj/Slic3r
2013-04-04 01:15:46 +02:00
3afeb5c7b5
Second layer commands were written multiple times
2013-04-04 00:52:11 +02:00
b725847a51
Bugfix: configuration wizard led to crash with simple mode. #1077
2013-04-03 19:26:59 +02:00
88e70a59c7
Don't wipe if option is disabled
2013-04-03 19:08:12 +02:00
d089d2b2d4
Bugfix: crash introduced by wipe
2013-04-03 19:06:33 +02:00
e602aad998
inspired by f5e48a3, a seems to work to fix 1076
2013-04-01 22:12:51 -05:00
0d6ff22e19
Merge branch 'wipe'
2013-03-31 11:36:04 +02:00
0e6d80d33c
Bump version number
2013-03-31 11:24:33 +02:00
01e86c2615
Releasing 0.9.9
2013-03-30 15:59:17 +01:00
04d2231901
Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049
2013-03-30 11:22:12 +01:00
7f23e72a10
Display preview for small files too. #929
2013-03-30 00:52:45 +01:00
33a4ec660d
better handling of too-small and too-short models #929 .
...
These changes handle small models better in the plater preview.
Extremely small thumbnails are preserved instead of culled,
allowing the model to be scaled up. The scale range is extended to
100000% to allow mm-scale objects expressed in meters to be opened
and scaled to mm.
Original coding by mesheldrake
2013-03-30 00:47:13 +01:00
ac2356f66a
Don't crash at the end of empty prints. #1042
2013-03-30 00:36:14 +01:00
7b7c9f6330
Launch even if config is corrupted. #1067
2013-03-30 00:30:21 +01:00
f5e48a306d
Bugfix: support material and brim didn't work correctly. Includes unit test. #1074
2013-03-30 00:21:09 +01:00
d4119b0eb1
Better bridge direction detection. #1068
2013-03-29 23:49:58 +01:00
5beb2187d3
Bugfix: infill direction wasn't correctly alternated when infilling every 2 layers. #1068
2013-03-29 19:24:08 +01:00
1b79b1cb20
Refactoring: use the clone() method for inflating Surface objects
2013-03-29 19:18:06 +01:00
e563c62094
Replace SetValue with ChangeValue to avoid wxWidgets to fire useless events
2013-03-29 18:56:34 +01:00
d2b451d9a1
Merge branch 'master' into wipe
2013-03-26 16:28:01 +01:00
aae9625a13
Bugfix: solid-infill-below-area wasn't ignored when fill_density = 0, causing solid layers here and there. #1049
2013-03-26 15:47:40 +01:00
2f046799f2
Removed offset() method from Slic3r::Polygon because it only works with ccw polygons
2013-03-26 14:03:24 +01:00
4c41f6c462
Safer safety_offset() for ExPolygons
2013-03-26 13:57:37 +01:00
843a700e96
Fixes for wipe
2013-03-25 23:06:18 +01:00
4cb36fcbe2
Remove cooling checkbox from simple mode
2013-03-24 21:28:16 +01:00
6bc5de0b5d
Allow custom ranges with layer_height = 0
2013-03-24 15:26:55 +01:00
b7cd362820
Remove scale from G-code comments
2013-03-19 19:16:13 +01:00
7ec6c6ffba
Lower 0.5*w to 0.4*w to fill finer gaps. #1057
2013-03-19 16:08:19 +01:00
34b192fde3
Merge pull request #1059 from cakeller98/Universal_File_Visibility
...
Added "known" as a valid model file type
2013-03-19 08:05:19 -07:00
9c122bda5e
Fix memory leak in avoid_crossing_perimeters. #1044
2013-03-19 16:02:03 +01:00
813aa5b307
Allow drag and drop for OBJ files
2013-03-19 12:25:10 +01:00
fd2a5e894a
Respect perimeter/infill order when multiple extruders are configured but only one is used
2013-03-19 11:58:03 +01:00
8bbaafd830
Added "known" as a valid model file type
...
=> 'Known files (*.stl, *.obj, *.amf)|*.stl;*.STL;*.obj;*.OBJ;*.amf;*.AMF;*.xml;*.XML',
When dialog pops up, it can see ALL known file types instead of only stl.
2013-03-18 20:52:55 -07:00
ec5f0635f7
Add wipe in GUI
2013-03-18 21:20:32 +01:00
96f1b7ab57
Merge branch 'master' into wipe
2013-03-18 21:18:24 +01:00
1abd8c9a9e
Remove the 'simplify' handle in ExtrusionPath after the recent refactoring. #1054
2013-03-18 18:03:14 +01:00
f0ac1c704e
Fix test framework detecting dE=0 as retraction
2013-03-18 18:01:01 +01:00
0b81911cff
Bugfix: artifacts near walls. #1049
2013-03-18 17:55:16 +01:00
8ce31c2a2b
Don't exclude any infill under internal bridges; revert infill pattern to rectilinear for internal bridges. #240
2013-03-18 13:32:19 +01:00
7f917671ab
Bugfix: horizontal projection for high-res models might show corrupted result
2013-03-17 15:39:51 +01:00
8d2c651ef2
$surface->thickness was erroneously defaulting to 1 mm
2013-03-17 14:58:10 +01:00
1064c9bb2a
Merge branch 'master' into grow-narrow
...
Conflicts:
lib/Slic3r/Fill.pm
lib/Slic3r/Print/Object.pm
2013-03-17 02:30:20 +01:00
7de8b20bc4
New wipe feature
2013-03-17 02:22:50 +01:00
83065b0789
Bugfix: wrong flow and bad pattern rotation when infill-every-layers was set to an arbitrary high value
2013-03-17 01:10:40 +01:00
04c0caad0b
Fix honeycomb infill overlap with perimeters
2013-03-17 00:57:58 +01:00
537fca47c5
Use solid infill speed for internal bridges; apply slowdown if any; don't use bridge fan settings. #240
2013-03-17 00:42:53 +01:00
700fee14aa
Set honeycomb as default fill pattern, as it works better at low layer heights and makes stronger parts
2013-03-17 00:24:53 +01:00
c999d0c44f
Set default value for first_layer_height to 0.35mm so that first_layer_extrusion_width = 200% works fine even when user sets layer_height to 0.1. A first layer height of 0.35mm works fine for both 0.35 and 0.5 nozzles so it should be fine for most users
2013-03-17 00:22:53 +01:00
