Useless for BambuPrinter. But used by third party printer
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib6a63e78816b25696c25952508f76c3d9221e363
Thanks OrcaSlicer.
This is just function for klipper printer.
NEVER used for BBL printer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910abceb67f4dcb4260f74f5dd1b4fb614812670
Should never use these two setting for bambuPrinter.
Thanks original code from OrcaSlicer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifda4086b71fd2ef170b044c7632d15fe2ef490fd
These two settings is necessary for some
specific user case.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9d70679932ac90c34296393d0e8bb8aebd8ebe48
This popup dialog was introduced to promote tree slim
style. Now it's time to remove it.
Change-Id: I34c0be56b4dc613e6e991dd87ab22eb4eaa1feb3
(cherry picked from commit 827c692a1877bfec914ef8f5a55c7357ed6e94d2)
Re-open this option as requested by github users.
Fix Jira STUDIO-2083; Github issue-1102
Change-Id: Ifb01a5153e7dc105bf2d29a98e64dda3a9d8e6d4
(cherry picked from commit e42914b2448c2693d19d40b0d84e64567b766f37)
Allow user to disable support independent layer height when prime tower closed.
Fix wrong WIKI link jumping.
JIRA: STUDIO-1685
JIRA: STUDIO-2308
Change-Id: I894fdd37b707c53e17fd4ad7d1518897f307e557
(cherry picked from commit e10d31e123306a0893087ea03693303768a2daf6)
previous commit only fix the crash when switch spiral_mode
and will cause crash when switch timelapse_mode
Change-Id: If21acf3701e9519de55a08e183620678378f61b9
If a travel path goes through an overhang expolygons, and their distance
is shorter than threshold, lift type will be set to SpiralLift.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I345788711755dd8611ecf385818e6052cd8abe9e
1. fix possible empty layers (caused by continues walls)
2. fix normal node may be absorbed in drop_nodes in "tree hybrid"
3. popup message to ask the user to select best parameters for tree strong
and tree hybrid.
4. auto select lightning infill for tree hybrid.
Change-Id: I7d172887a9b0e4f268267684e83fc02dc7ec6a0c
(cherry picked from commit bc6d130e86c252d7fc1f84c4df7da95050dd5d51)
1. change base pattern "None" to "Hollow", and add an icon image
2. fix a bug of not initializing m_highest_overhang_layer
3. fix a bug where normal(auto) with Tree* styles won't generate any
supports.
4. add popup message when selecting support material for interface.
5. draw connected loops when wall count is larger than 1
Change-Id: I7ea211d2971b25c65724bb10d0f6cf6e0b68c6a1
(cherry picked from commit 4c1ae7f937239fc3e1397ec2cb3b290d886bb0f0)
1. smooth nodes' positions
2. draw ellipse along movement direction
3. fix a bug of radius not smooth
4. fix a bug of Tree Strong having too large radius
5. fix a bug in plan_layer_heights: when wipe tower is
enabled, independent_support_layer_height is false, and all support
layers should be exactly the same as the object.
Jira: STUDIO-1785
6. move support style popup message to on_value_change, so only show the
popup when the user changes support type or style.
Change-Id: Ibced7a28f436d96000ee35a7194b68bb5a20a32d
(cherry picked from commit 0d814b07e433533c8de1b7a04bf52b577de0778d)
1. Add a new style "Tree Slim". If enabled, tree
support branches are merged more aggressively, and the support volume
is minimized.
2. Enable support style, add back Snug for normal support.
3. Remove hybrid(auto) type and use "Tree Hybrid" style to represent it.
4. Fix a bug in plan_layer_heights that may generate empty layers when
layer height is set to 0.3mm.
5. Fix a bug where no raft is generated if there is no overhang.
6. Fix the bug where no bottom interface or bottom gap is generated when
tree slim is selected.
7. Use physical distance to calc radius
Change-Id: Iacd57018ae5496cdc9acd28551c44d1c88c53fe0
Move setting tab position according to user suggestion
in github issue #494
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie5b62e57d6d4c19504f40c62ffeff1418ceee1f8
