As title. Also add time for waiting chamber temp in printing time
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8054080d2e8821e421a6d03222b8b25365b5977f
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id14f3d91171b81239b336ef879061c6de7d68edf
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
Follow-up of 6be84d529d740c44c1e9bf533e70e167b3442063 - Fixed processing of spiral vase mode in GCodeProcessor::process_G1
Co-authored-by: enricoturri1966 <enricoturri@seznam.cz>
Mark code from OrcaSlicer with same comment tag for follow easily
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If4db502a1b0e6d0648c73f2f383b6d1cc8e1aa01
Fix for floating layer under multi-color
printing while z_hop is zero.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8cc96bd18020cac8424fe4c3e62fb87da118b826
Using layer z to calculate total layer number is not
precision, because for some models with sharp top
layer, the top layer may be empty.
Check the final layer change in final gcode file.
This must be same with total layer number.
Jira: Studio-2123
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I5d001a8bb9548c3fb5f67fda966051ac3bb16502
Seperate travel time from extrusion role time and
show it seperately.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Icf0aaf63c4d4ed7d1407037e5ae051d61938f973
Should not insert new line in post process
which changes the the final line id in gcode
file
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib8b837cf313a1308260db88bf5390fefe9708cc8
When travel in x-y-z move, the acceleration should
be limited by trivector rather than one axis.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If8e5d394cf5d8772d324b9c851c047d9235d9b6b
Jerk handling has been changed in printer.
Changed in slicer as well.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic3aef43a534a7f0b85b734e747dc3ca883faaa46
hrc determine which filament could be printed by the nozzle
if the filament required hrc smaller than the nozzle hrc
the fillament could be printed
either of it be zero means use other printers
or user want to print it anyway
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic32dfaed4f9c80774a670c362de612254f3a5ed0
Add bed temperature checker in gcode processer. And
save slice warning into GcodeProcessorResult.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Iee96e4ab165a3171a5a1e165450bfc360401647f
All extruder offset should be extruder_offset[0] when
it is single extruder multi material.
Add handling when load config from gcode.
This is fix for github issue #213
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia881b2bfbbdffa98e3c3db7b35201dc86b520b29
