057518f010
FIX: enhance for timelapse gcode
...
1. support traditional timelapse for H2D when printing by object
2. insert timelapse gcode when close wipe tower
3. remove hard gcode before filament gcode
jira: none
Change-Id: Ib56c21b1f07832f2cbc8ba5ab7f2e8653b3105bf
(cherry picked from commit 7613474cefd210685d16a5585608c0c7cb7efa95)
(cherry picked from commit fff787345625a0031934e609b1b3709e39decd4a)
2025-09-16 16:56:24 +08:00
4cedd5476a
ENH: set default nozzle volume type to standard
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ia7c0118f89aee4e55c4c4b466957d80453775237
(cherry picked from commit a780ed9e1d4c0cea723c1107229649a8fbeb1e51)
2025-09-16 15:36:42 +08:00
a0c4ead3b0
ENH: add virtual nozzle temp command in H2D gcode
...
jira:STUDIO-10104
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I47b083384e6730cf973dc865e821dce3a7e46277
(cherry picked from commit 8e48e10f51a77345fc6da37417af8eafeaae3f8f)
2025-09-16 15:36:32 +08:00
2be73a010b
ENH:add "not support bed type" function
...
jira: STUDIO-9028
Change-Id: Id1c6cc9005fc5073d885274e360d31282063a9a3
(cherry picked from commit e74c9e710b4bed97e637c8197052b5bd864bfc95)
2025-09-16 15:36:16 +08:00
8acce43473
ENH: add filament category
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com >
Change-Id: I0f31a376527bc540d27c49908712d08bdba3d719
(cherry picked from commit 3f2f704676f0a8a6cf1e43e8b32fd999bcc59d31)
2025-09-16 15:00:44 +08:00
3f2dad133f
Merge remote-tracking branch 'upstream/main' into dev/h2d
...
# Conflicts:
# resources/profiles/BBL.json
# src/slic3r/GUI/AmsMappingPopup.cpp
# src/slic3r/GUI/MediaFilePanel.cpp
# src/slic3r/GUI/Plater.cpp
# src/slic3r/GUI/StatusPanel.cpp
2025-09-16 14:46:40 +08:00
8c7475eded
ENH:instead of prime_volume by filament_prime_volume
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com >
Change-Id: I96e7d0604da8f90678feed81833e3a634752ffff
(cherry picked from commit be02e769bb49680d6be678fc5fa73a141ca8da1c)
2025-09-16 10:39:19 +08:00
03998203fb
ENH: enhance some functions of the wipe_tower
...
1.Add automatic calculation of the wipe_tower's brim width by height；
2.modify the min_depth_per_height and the default ridwidth
jira: none
Change-Id: Idd96bc90e8e631aa8481b559e1e9fec24c6b822f
(cherry picked from commit 4dd4e9e12c02d945a0ac3fd2020f75313c5b2cc9)
2025-09-13 18:49:41 +08:00
a691035c22
Fixed many profile issues and cleaned up some messes. ( #10686 )
2025-09-11 17:50:53 +08:00
0ffd46d3d2
fix check_filament_compatible_printers
2025-09-10 23:21:45 +08:00
41c71416ab
update profiles
2025-09-10 23:21:45 +08:00
9ba0a4e4b9
ENH: update custom gcode for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I6c69c6ee3cd77c7b82d6b37592e9fc4ebfd539d9
(cherry picked from commit 785e0299719215f4a4f2b074ec7809e01f77f322)
2025-09-10 16:19:55 +08:00
b2c272c62d
ENH: add filament change length for color change
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com >
Change-Id: I84ab638d6af056ede9b9524d1395eb42fa731150
(cherry picked from commit 9b46d437bad707d38a978bc768e0359979e5fb19)
2025-09-10 16:00:00 +08:00
bd05e80d31
ENH: update nozzle volume for H2D
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I21e56af3d4d2d3eb2ec4265ce3f34bac649b18f0
(cherry picked from commit 3213963399140b6d4035d8547af5215f123df686)
2025-09-10 15:30:00 +08:00
07865a9763
ENH: chamber temperature set to 60 for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ic7f955888c3c451e36d1c12623f34a3487d6b9fb
(cherry picked from commit efc2548cd04fed3541069ea22603b816b3ed12b4)
2025-09-10 15:00:39 +08:00
157ce6f03f
ENH: update custom gcode for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I5747a7cf019fee24a79c26743fcd227948846b51
(cherry picked from commit 496786297834d72c530df595c79eaec1e1a95c20)
2025-09-10 15:00:31 +08:00
3c37eb54e8
FIX: modify the wipe tower parameters
...
jira: none
Change-Id: I9b18166b83df71ace1585944741dffd18de42bbc
(cherry picked from commit 8df768a4479498fdfa82b227ce489006a09432ea)
2025-09-10 10:59:36 +08:00
6c7561bfee
ENH: reduce 100% overhang wall speed to 10mm/s
...
The old speed 50mm/s is too high and cause some print quality problems.
Also change the display of overhang speeds to better adhere to the code.
jira: STUDIO-9641
Change-Id: I6efa981db5bf88a9cf5bb70abb443cdfa1783025
(cherry picked from commit 979fefffd528ab1fb4e670fd88f716a3aed2e6f2)
2025-09-10 09:35:38 +08:00
582dc765b2
ENH: update process profile for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ia157b81ad03083a34b7456998625682b6b69e6fc
(cherry picked from commit 2c1bcde53de8e125991307e653c49faa1c7430c7)
2025-09-10 09:08:34 +08:00
c488857e52
ENH: modify nozzle diameter sequence
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ia17f86e3f035ad9389d0f44f8378c822f8cc947e
(cherry picked from commit d3927a59e99ab5fc484934703d4eb08b0e728179)
2025-09-09 17:16:54 +08:00
b13c57d852
ENH: update some params for filamnet in H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I1171dbf41f840bb0a59045c70a811a5da2bbd694
(cherry picked from commit 6b13655f9dbd87d1f1bf0f0d62346b2043e3890d)
2025-09-09 15:41:33 +08:00
0d82e6c297
FIX: modify the H2D picture
...
jira: STUDIO-9592
Change-Id: I18a8a75ee77bf828bf148c4f7d49f6603141789c
(cherry picked from commit d3f9723349dbbb3194a45a125e94065fc7d87924)
2025-09-09 15:37:41 +08:00
4af7a47d57
ENH: update gcode for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I8b33061aba2ba142bc435c56148e3a5ac500e413
(cherry picked from commit 17706151445e94005ccad956c473daee0b576aa7)
2025-09-09 14:41:24 +08:00
83accbed25
ENH: add PPS-CF/PPA-CF detection for multi-extruder printer
...
jira: STUDIO-9660
Change-Id: I1df024e178b8561569b493888d6057d8f96aea3c
(cherry picked from commit b68a7b3bd6ad5c980885fbaed3c635ae1a424f73)
2025-09-09 14:41:23 +08:00
d3f3705424
ENH: set H2 series' best_object_pos to 0.3x0.5
...
So objects are auto arranged near the chamber fan.
jira: none
Change-Id: Ia7c76c0b048fad51728d2b24c9dd6530c8c30497
(cherry picked from commit 0f37893bea4961e1461df0c55bb4ad95bd4fb17f)
2025-09-09 14:41:23 +08:00
7aa077f275
ENH: refine time estimation in filament change
...
1.Add sync command. Now gcode and dirrectly add time sync command
2.Add support for ceil and floor in placeholder
3.Update change filament gcode for H2D
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I6dd97cbd96bae1c2751c08357ff64947876d7471
(cherry picked from commit c99fcd454c2499b0c0e3ed9402a2182c00a9bffa)
2025-09-09 14:41:17 +08:00
c22e67cc5f
FIX: add printer picture for H2D
...
jira: STUDIO-9592
Change-Id: I1e6b0cc04f3dba8578b5c59eeb1d24ba522f0c72
(cherry picked from commit dec14c4bac748c894c91d796eeaf1ee698973b12)
2025-09-09 11:02:36 +08:00
c9e86937d2
Add Official overture preset ( #10631 )
...
* add overture preset
* Fix PLA pro profile missing issus
* fixed profile lib indexing order issus
* Merge branch 'main' into main
* Merge branch 'main' into main
2025-09-09 10:57:58 +08:00
e246694d58
FIX: the extruder diameter check fault
...
jira: [none]
Change-Id: Ib5719996b0b660bb68ab20c7c38cc6b2ce3a9286
(cherry picked from commit 0bbc185b712777abbd5b36376cae926d100780af)
2025-09-09 10:46:29 +08:00
e6991d215e
ENH: modify process profile for H2D in high flow
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I966843e45fb3243b35e84137c78b786ce3d2e7cd
(cherry picked from commit 5980be0fd7e5a04fda0bd0b5b501455942245381)
2025-09-07 22:48:01 +08:00
884e46c788
ENH: update fan related settings for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I9ea172f676b22d5a83c2dd57caa1549192b1c3a5
(cherry picked from commit 4f5b6275f552c970e16cb570ddf61903b5738bfe)
2025-09-07 22:46:20 +08:00
bd0a885b11
ENH: modify fan speed for bambu tpu for AMS
...
Set fan speed to 40
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I861f78e2cca4b31daf41e2cba0a4b9b11a658a5d
(cherry picked from commit 4a087ef78070af66d7551aacdca74c9a2d4463f2)
2025-09-07 22:45:59 +08:00
756fe699ba
ENH: update plate temp for asa filaments
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Icd88b23c9e1b5027f5aff4aeba594e953aed9ac4
(cherry picked from commit 5034222197181808a622d7eaa0117b4595676d01)
2025-09-07 22:45:32 +08:00
25ebc54145
FIX: modify the timelapse gcode
...
recover the y position when timelapse gcode end
jira:none
Change-Id: I80b9b65395722e0190aa7d50bb064e095d8ec09d
(cherry picked from commit db5e28ddaa1d4d7c58888d817dd77c176556e106)
2025-09-07 22:44:55 +08:00
a971c5f342
ENH: Add gaps in the outer wall of the wipe_tower
...
and modify the path of travel to the wipe_tower after flushing
jira:none
Change-Id: Id4b0571fd12372c59cf522c13e256c7cc4ac3565
(cherry picked from commit 17771d0fbf753dd22411ce490586958bd643264e)
2025-09-07 21:47:16 +08:00
2c5c6e6f12
FIX: add timelapse_gcode for H2D
...
jira: none
Change-Id: Iab0248c22963ca7d0dc75fc03d2ccda147059226
(cherry picked from commit c141ed25f5888f0bdd059d5fccb1c69890996fc0)
2025-09-07 21:37:50 +08:00
0a40be9eef
ENH: optimize custom gcode for H2D
...
1.Add AMS empty print detection switch
2.Enable heated bed tilt compensation
3.Increase material length for easier bundling
4.Add Z-axis vibration compensation
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I9e51d3812eab51447c47f947447b5e1f281ab9a7
(cherry picked from commit ce7a244c3dd73f3c7e2d809ea357a4ebef14653e)
2025-09-06 23:54:12 +08:00
09d80d44a2
Fix BBL filament profile loading issue
2025-09-05 19:10:21 +08:00
90aeb033f4
ENH: CLI: update compatibility
...
jira: no-jira
Change-Id: Id1de30ce19fe1accb08ad60653b739dc3c446e59
(cherry picked from commit ad2beb93447ae931c379e485acfcba6945519627)
(cherry picked from commit e92873206dfceb106158c03877828bb490ba2efd)
2025-09-05 17:46:48 +08:00
6dc7ca52b7
Regroup 3rd party filaments for BBL printers
2025-09-05 17:42:43 +08:00
cb09f1604d
ENH: add profiles for H2D
2025-09-05 17:37:14 +08:00
df5babfc57
[Profiles] Enable Arc fitting for QIDI plus4 and Q2 printers ( #10618 )
...
* New Machine
This update introduces new consumables and a new model, Q2
* Delete HATCHBOX PLA @Qidi - 副本.json
* The arc fitting for QIDI plus4 and Q2 has been initiated
2025-09-04 00:13:54 +08:00
0a3aa11f8e
[Profiles] Optimize Phrozen Arco 0.4 nozzle.json start up gcode ( #10600 )
...
Update Phrozen Arco 0.4 nozzle.json start up gcode
Changes m109 S200 in machine_start_gcode to allow printer to properly utilize filament profile temperatures. With original code, the temperature will be stuck at 200c despite filament profile having different first layer and other layer temperatures.
2025-09-04 00:12:38 +08:00
50cdca313b
[Profiles] Optimize profiles for BLOCKS RF50 printer ( #10597 )
...
* Update BLOCKS RF50 profiles
* Fix z_hop_types value attribution
* Fix: invalid z_hop_types parameter: slope
2025-09-04 00:11:28 +08:00
a5bfb78bf7
[Profile] Fix start_gcode for FlyingBear machines ( #10593 )
...
* Update FlyingBear S1 0.4 nozzle.json
* Update 0.16mm Optimal @FlyingBear Reborn3.json
* Update 0.16mm Optimal @FlyingBear S1.json
* Update fdm_process_common.json
* Update fdm_klipper_common.json
* Update fdm_machine_common.json
* Update fdm_klipper_common.json
* Update fdm_machine_common.json
* Update fdm_process_common.json
* Update fdm_process_common_S1.json
fix some parameters
* Update fdm_process_common.json
* Update FlyingBear S1 0.4 nozzle.json
* Update 0.08mm Extra Fine @FlyingBear S1.json
* Update 0.12mm Fine @FlyingBear S1.json
* Update 0.16mm Optimal @FlyingBear S1.json
* Update 0.20mm Standard @FlyingBear S1.json
* Update 0.24mm Draft @FlyingBear S1.json
* Update 0.08mm Extra Fine @FlyingBear Reborn3.json
* Update 0.12mm Fine @FlyingBear Reborn3.json
* Update 0.16mm Optimal @FlyingBear Reborn3.json
* Update 0.20mm Standard @FlyingBear Reborn3.json
* Update 0.24mm Draft @FlyingBear Reborn3.json
* Update FlyingBear S1 0.4 nozzle.json
* Update fdm_process_common_S1.json
* Update fdm_process_common.json
* Update 0.08mm Extra Fine @FlyingBear S1.json
* Update 0.12mm Fine @FlyingBear S1.json
* Update 0.16mm Optimal @FlyingBear S1.json
* Update 0.08mm Extra Fine @FlyingBear Reborn3.json
* Update 0.12mm Fine @FlyingBear Reborn3.json
* Update 0.16mm Optimal @FlyingBear Reborn3.json
* Update FlyingBear S1 0.4 nozzle.json
fix zhop type
* Update fdm_machine_common.json
fix zhop type
* Update fdm_process_common_S1.json
* Update fdm_process_common.json
* Update FlyingBear Generic PLA.json
* Update FlyingBear PLA @S1.json
* Update Other PLA @S1.json
* Update fdm_filament_pla @S1.json
* Update fdm_filament_pla_Hyper @S1.json
* Update fdm_filament_pla_other @S1.json
* Update fdm_filament_pla_Hyper_other @S1.json
* Update fdm_filament_pla.json
* Update fdm_filament_pla_Hyper.json
* Update fdm_process_common_S1.json
* Update fdm_process_common.json
* Update fdm_machine_common.json
* Update fdm_klipper_common.json
* Update 0.08mm Extra Fine @FlyingBear S1.json
* Update 0.08mm Extra Fine @FlyingBear Reborn3.json
* Update 0.08mm Extra Fine @FlyingBear S1.json
* Update 0.08mm Extra Fine @FlyingBear Reborn3.json
* Update 0.12mm Fine @FlyingBear Reborn3.json
* Update 0.12mm Fine @FlyingBear S1.json
* Update 0.16mm Optimal @FlyingBear S1.json
* Update 0.16mm Optimal @FlyingBear Reborn3.json
* Update fdm_filament_pla.json
* Update fdm_filament_pla_Hyper.json
* Update fdm_filament_abs.json
* Update fdm_filament_pc.json
* Update fdm_filament_pet.json
* Update fdm_filament_pa.json
* Update fdm_filament_tpu.json
* Update fdm_filament_abs @S1.json
* Update fdm_filament_abs_other @S1.json
* Update fdm_filament_pa @S1.json
* Update fdm_filament_pa_other @S1.json
* Update fdm_filament_pc @S1.json
* Update fdm_filament_pc_other @S1.json
* Update fdm_filament_pet @S1.json
* Update fdm_filament_pet_other @S1.json
* Update fdm_filament_pla @S1.json
* Update fdm_filament_pla_other @S1.json
* Update fdm_filament_pla_Hyper @S1.json
* Update fdm_filament_pla_Hyper_other @S1.json
* Update fdm_filament_tpu @S1.json
* Update fdm_filament_tpu_other @S1.json
* Update fdm_filament_tpu.json
* Update FlyingBear PETG @S1.json
* Update Other PETG @S1.json
* Update Other PETG @S1.json
* Update FlyingBear PETG @S1.json
* Update FlyingBear Generic PETG.json
* Update fdm_filament_pet.json
* Update fdm_filament_pet @S1.json
* Update fdm_filament_pet_other @S1.json
* Update FlyingBear Generic PLA.json
* Update FlyingBear PLA @S1.json
* Update Other PLA @S1.json
* Update FlyingBear S1 0.4 nozzle.json
2025-09-04 00:02:05 +08:00
70df5c2dd3
Prepare for profile cherry-picking
2025-09-03 22:10:12 +08:00
03e8b2c608
Fix Anycubic Kobra 2 Neo Machine Profile ( #10548 )
...
* Updated machine start and end gcodes
* fix: Update Kobra 2 Neo profile for improved compatibility
- Switch gcode_flavor from marlin to marlin2
- Enable relative E distances for better extrusion control
- Add M420 S1 to start gcode to enable bed leveling mesh
- Add G92 E0 before layer changes to reset extruder position
- Fix end gcode formatting and add M83 for consistent relative mode
- Adjust purge line start position from Y3 to X10 Y5
* fix: Typo in end machine gcode
---------
Co-authored-by: frawg <>
2025-08-30 13:22:10 +08:00
ecc993f1a0
Update TURKISH translations (V2.3.1-alpha) ( #10568 )
2025-08-30 12:55:54 +08:00
416145577c
[Profile] Add Qidi Q2 ( #10539 )
...
* New Machine
This update introduces new consumables and a new model, Q2
* Delete HATCHBOX PLA @Qidi - 副本.json
2025-08-30 12:54:49 +08:00
4d76f0dc66
Feat/profiles cubicon xceler i ( #10373 )
...
* profiles(Cubicon):
add xCeler-I 0.4 nozzle printer profile
add Cubicon 0.4 nozzle filament profile
* Fixed missed profile name.
* removed default filament colors.
* Cover image size changed.
---------
Co-authored-by: cubi-sw <hcbyeon@hyvision.co.kr >
Co-authored-by: SoftFever <softfeverever@gmail.com >
2025-08-26 23:22:16 +08:00
