* Base IS Machine
* Toggle line
* Rebase
* Intento 1
* Wiki IS
* Flavorized
* Tooltips
* Calibration using the same list
* max
* Reorder JD validation
* Refactor set input shaping
* Calibrations IS
* Default values
* Axis
* Orca comments
* Rename input_shaping_enable to input_shaping_emit
Refactor all references of the input shaping configuration option from 'input_shaping_enable' to 'input_shaping_emit' across the codebase. This improves clarity by better reflecting the option's purpose of controlling whether input shaping commands are emitted in the generated G-code.
Restore DONT EMIT FOR KLIPPER
* Refactor input shaping option toggling logic
Simplifies and consolidates the logic for toggling input shaping related options in TabPrinter::toggle_options(). Uses a loop to handle enabling/disabling lines based on GCode flavor compatibility, and refines the conditions for toggling individual options.
* Improve input shaping option toggling logic in TabPrinter
* GrayOut Emit to gcode limits for klipper
* Typo
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Typo
* Skip Y input-shaper when type is Disable
If marlin2 and disabled it will be already disabled at X.
* IS expert
Co-Authored-By: SoftFever <softfeverever@gmail.com>
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Fixed PrintConfig.hpp order so Repetier outputs, updated ConfigWizard to use gcode_flavor value rather than static
Add Repetier to enum values and labels
Update to add Repetier base profile to the setup wizard
Re-order gcode_flavors in PrintConfig.hpp and PrintConfig.cpp to match
Revise ConfigWizard.cpp to use gcode_flavor rather than list order
Add Repetier profiles and include in custom.json (profile disables m73 and stop emit machine limits which Repetier doesn't use)
* Fix JSON formatting in Custom.json
* Add support for pressure advance in Repetier flavor
* Add Repetier flavor show motion ability tab is visible
* Refactor jerk handling for Repetier flavor
* Update resources/profiles/Custom/machine/MyRepetier 0.4 nozzle.json
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update resources/profiles/Custom/machine/fdm_repetier_common.json
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* add back localisation flag for Klipper
* tidy up indentation and braces
* Space indentation for Repetier profiles changed to tab
* Fix space indentation in Custom.json file for Repetier profiles
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Warn for first and other layers big temperature delta
Warn user if temperature differences (first layer vs other layers) for nozzle and plates are above a certain delta.
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add OrcaCloud sync platform and preset bundle sharing system
Introduce OrcaCloud, a cloud sync platform for user presets, alongside
a preset bundle system that enables sharing printer/filament/process
profiles as local exportable bundles or subscribed cloud bundles.
OrcaCloud platform:
- Auth to Orca Cloud
- Encrypted token storage (file-based or system keychain)
- User preset sync with
- Profile migration from default/bambu folders on first login
- Homepage integration with entrance to cloud.orcaslicer.com
Preset bundles:
- Local bundle import/export with bundle_structure.json metadata
- Subscribed cloud bundles with version-based update checking
- Thread-safe concurrent bundle access with read-write mutex
- Canonical bundle preset naming (_local/<id>/... and _subscribed/<id>/...)
- Bundle presets are read-only; grouped under subheaders in combo boxes
- PresetBundleDialog with auto-sync toggle, refresh, update notifications
- Hyperlinked bundle names to cloud bundle pages
Co-authored-by: Sabriel Koh <sabrielkcr@gmail.com>
Co-authored-by: Derrick <derrick992110@gmail.com>
Co-authored-by: Mykola Nahirnyi <mnahirnyi@amcbridge.com>
Co-authored-by: Ian Chua <iancrb00@gmail.com>
Co-authored-by: Draginraptor <draginraptor@gmail.com>
Co-authored-by: ExPikaPaka <112851715+ExPikaPaka@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ocraftyone <Ocraftyone@users.noreply.github.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: peterm-m <101202951+peterm-m@users.noreply.github.com>
* Fixed an issue on Windows it failed to login Orca Cloud with Google account
* Elefant foot compensation for solid layers
Elefant foot compensation for solid layers above bottommost by infill density manipulation.
* Update Fill.cpp
* change the option to expert cat
* use is_approx for float
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add extrusion role change G-code options
Introduces new G-code options for handling extrusion role changes at the process and filament levels. Updates configuration, GUI, and GCode logic to support 'process_change_extrusion_role_gcode' and 'filament_change_extrusion_role_gcode', allowing custom G-code insertion when the extrusion role changes.
Co-Authored-By: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* Optimize extrusion role-change gcode handling
Cache gcode template strings and current filament id, and guard creation of DynamicConfig/placeholder processing behind a check that at least one role-change gcode is non-empty. This avoids redundant config lookups and DynamicConfig/placeholder parsing when no custom role-change gcode is defined, improving clarity and performance without changing behavior.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
# Description
This commit adds the enhancement of https://github.com/OrcaSlicer/OrcaSlicer/issues/13116
- Adds checkboxes to enable or disable the fan speed override during print or after printing is completed. This allows users to, for example, only override the fan speed during printing whilst leaving the fan speed as is set in the machine gcode at the end.
- Two new flags are added for this: `activate_air_filtration_during_print[extruder]` and `activate_air_filtration_on_completion[extruder]`. These can be used to more finely control machine gcode
- Current filament settings remain as they are: `activate_air_filtration[extruder]` settings are unaffected and by default both new flags are set to true, ensuring the same set behavior as before.
# Screenshots/Recordings/Graphs
<img width="856" height="208" alt="Screenshot From 2026-04-09 18-57-14" src="https://github.com/user-attachments/assets/e71e7de3-2def-4046-b5dc-55bf3b516ce5" />
As you can see there are now checkboxes left of the fan speeds. They have their own tooltip too, which also helps identify the correct flags for users who want to adjust their machine gcode.
## Tests
I have thoroughly tested this on my own computer (CachyOS) and on my printer. I have also carefully checked the gcode in every possible state this is in and ensured that the unsaved changes dialog properly displays the labels for these settings. Flags are set properly, sliced files properly use the flags if you check for them in machine gcode and default behavior is unaffected for those who have already changed settings for air filtration. From what I can see, this does exactly what it should be doing without any issues.
* make initial layer travel move acceleration and jerk configurable
* Update spelling to match UI pattern
* Update min integer and re-order to match patterns
---------
Co-authored-by: Thomas Scheiblauer <tom@sharkbay.at>
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
* Union ex brims
Revert "Union ex brims"
This reverts commit bbc9a39faf318dc2df093eb2bdcebf19a4162fe9.
Update Brim.cpp
* dont repeat paths
* Update Brim.cpp
* multimaterial brim independiente
* Normal brim if is by object
* fix print order
* cleaning 1
* cleaning 2
* Normal brim if multimaterial on first layer
* fix artifact
* combine_brim optional
refactoring
* refactoring gcode.cpp
* refactoring brim.cpp
Update Brim.cpp
* Remove multimaterial first-layer check for brims
Stop detecting extruders used on the first layer and remove the is_multimaterial_first_layer guard. Simplify can_combine_brims to only consider combine_brims and whether printing is ByObject, allowing brims to be combined across extruders unless printing by object or combine_brims is disabled. Cleans up unused code and simplifies brim-generation conditions.
* Remove material specification from unified brim comment
* Update PrintConfig.cpp
Previously, wipe tower behavior was determined by checking if the printer
was a QIDI vendor. This introduces a configurable enum (Type 1 / Type 2)
so any printer can select its wipe tower implementation. BBL printers
remain hardcoded to Type 1. Qidi profiles default to Type 1.
1. Dirty flags not showing for extruder options:
2. Crash when switching to non-first extruder tabs:
3. Modifying one extruder's parameter affects other extruders:
## Summary
- Change default bed temperature type from "By First filament" to "By Highest Temp"
- Move `bed_temperature_formula` option from develop mode to advanced mode for better accessibility
- Relocate UI control from "Basic Information - Advanced" to "Multimaterial Setup" section where it's more relevant for multi-filament printing
Using the highest temperature of all printed filaments is generally safer for bed adhesion than using the first filament's temperature, especially in multi-material prints where different filaments may require different bed temperatures.
<img width="390" height="239" alt="Screenshot 2026-02-26 at 18 44 56" src="https://github.com/user-attachments/assets/0fe9f8c7-062a-4a7a-8ab3-c52df7e74b26" />
Wipe tower interface features and preheat fixes
Fresh PR branch rebuilt on upstream/main (squash of origin/BBL-studio-wipe-tower-merge) to avoid merge-history issues.
* Fix extruder_id out-of-bounds in switch_excluder
Added a check to reset extruder_id to 0 if it exceeds the size of nozzle_volumes or extruders, preventing potential out-of-bounds access.
Co-Authored-By: Christopher R. Palmer <1305033+crpalmer@users.noreply.github.com>
* Add custom nozzle diameter option in sidebar
Ensures that if the actual nozzle diameter is not present in the list, it is added as a custom option. This improves user experience by allowing selection of non-standard nozzle diameters.
Refactor nozzle diameter selection logic in Sidebar
Simplified the logic for updating the extruder nozzle diameter combo box by removing redundant checks and streamlining the addition of custom nozzle diameters. This improves code clarity and ensures the actual nozzle diameter from the printer config is always considered.
Co-Authored-By: yw4z <yw4z@outlook.com>
* Prevent profile switch if selected diameter matches nozzle
Adds a check in Sidebar::priv::switch_diameter to avoid switching printer profiles when the selected diameter matches the current nozzle diameter in the configuration. This prevents unnecessary profile changes and improves user experience.
---------
Co-authored-by: Christopher R. Palmer <1305033+crpalmer@users.noreply.github.com>
Co-authored-by: yw4z <yw4z@outlook.com>
* fixes: keys_map is initialized with itself [-Winit-self]
* fixes: operation on repeats may be undefined [-Wsequence-point]
* fixes: warning: suggest parentheses around && within || [-Wparentheses]
* fixes: moving brim_points to itself [-Wself-move]
* fixes: operation on unprintability may be undefined [-Wsequence-point]
* fixes: extra tokens at end of #endif directive [-Wendif-labels]
* fixes: converting to non-pointer type int from NULL [-Wconversion-null]
* review result: simplifies fix 'operation on repeats may be undefined'
Port Z Anti-Aliasing from BambuStudio-ZAA (https://github.com/adob/BambuStudio-ZAA)
to OrcaSlicer. ZAA eliminates stair-stepping on curved and sloped top surfaces
by raycasting each extrusion point against the original 3D mesh and micro-adjusting
Z height to follow the actual surface geometry.
Key changes:
- Add ContourZ.cpp raycasting algorithm (~330 lines)
- Extend geometry with 3D support (Point3, Line3, Polyline3, MultiPoint3)
- Template arc fitting for 2D/3D compatibility
- Change ExtrusionPath::polyline from Polyline to Polyline3
- Add 5 ZAA config options (zaa_enabled, zaa_min_z, etc.)
- Add posContouring pipeline step in PrintObject
- Update GCode writer for 3D coordinate output
- Add ZAA settings UI in Print Settings > Quality
- Add docs/ZAA.md with usage and implementation details
ZAA is opt-in and disabled by default. When disabled, the slicing pipeline
is unchanged.
## Problem
Some Creality printers (e.g. Ender-3 V3 SE) rely on metadata comments in the first lines of G-code files to display print info on the screen (estimated time, filament usage, layer height). This follows a format originally used by Cura/Creality Print:
```
;FLAVOR:Marlin
;TIME:3708.97
;Filament used:6.21m
;Layer height:0.2
```
OrcaSlicer currently has no way to write content before the `HEADER_BLOCK` in the G-code output, and does not expose `print_time_sec` or `filament_length_m` as usable placeholders. As a result, these printers show zeroed-out print info on screen.
## Changes
### 1. New placeholders (post-processing)
Added two new G-code placeholders resolved during post-processing:
- `{print_time_sec}` — total estimated print time in seconds (double)
- `{filament_length_m}` — total filament length in meters (double)
These values are only available after G-code generation, so they use inline marker replacement (`@PRINT_TIME_SEC@`, `@FILAMENT_LENGTH_M@`) that `GCodeProcessor::run_post_process()` substitutes with actual computed values — the same pattern used by existing M73 and layer count placeholders.
### 2. New "File header G-code" option (`machine_top_gcode`)
Added a new G-code field in **Printer Settings > Machine G-code** that writes content at the very top of the output file, before `HEADER_BLOCK_START`. This allows users to add firmware-specific metadata that must appear in the first lines.
### 3. Creality Ender-3 V3 SE profile update
Pre-configured the Ender-3 V3 SE profiles (all 4 nozzle variants) with a default `machine_top_gcode` value matching the Cura-compatible header format, so print info displays correctly out of the box.
# Screenshots
| Before (current OrcaSlicer) | After (this PR) |
|---|---|
|  |  |
## Tests
- Sliced test model with Ender-3 V3 SE profile
- Verified G-code output contains correct values in first lines:
- `;TIME:` with actual print time in seconds
- `;Filament used:` with filament length in meters
- `;Layer height:` with correct layer height
- Verified `{print_time_sec}` and `{filament_length_m}` work in both Machine Start G-code and File header G-code fields
- Verified empty `machine_top_gcode` produces no extra output
- Built and tested on macOS (arm64)
* added option to save a profile as detached(no inheritance)
* Revert "added option to save a profile as detached(no inheritance)"
This reverts commit c1326c6decd7bae49d2e8e811ae2f477a3b1186a.
* re-commiting the changes
* fixed conflicts with upstream
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
