a6ddab856b
Wipe tower: refactoring of brim and solid infill on first layer
2021-04-05 23:39:27 +02:00
f6de946dd7
Wipe tower: don't use soluble filament for perimeters, sparse infill or first layer
2021-04-05 23:39:27 +02:00
3ed68ac28a
Wipe tower: slightly changed finish_layer logic so it can be called after any toolchange
2021-04-05 23:39:27 +02:00
cc7ef40e20
Wipe tower: remove unfinished square wipe tower option
2021-04-05 23:39:27 +02:00
97c4c02001
Wipe tower: don't do sparse infill when there is a soluble filament above it
2021-04-05 23:39:27 +02:00
ab3890dab5
Follow-up of 3fce8398f0 - Fixed build warnings
2021-03-31 08:54:58 +02:00
3fce8398f0
Follow-up of 6ffa51da58 - Modified export of final M73 lines for remaining time to next printer stop accordingly to firmware specifications
2021-03-30 09:59:10 +02:00
68303059a6
Extract bed size from gcode produced with Simplify3d
2021-03-25 09:23:14 +01:00
645e5b6862
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_extended_m73
2021-03-24 12:05:36 +01:00
9c951b3108
Fixed parsing of g-code files generated by newer versions of Simplify3D
2021-03-24 11:36:16 +01:00
a0feb0f652
Preview and G-code viewer - Fixed synchronization between markers for pause print, color changes, custom g-code, retractions, deretractions and current line shown in g-code window
2021-03-23 12:46:04 +01:00
6ffa51da58
1st installment of export to gcode of M73 lines for remaining time to next printer stop
2021-03-23 09:05:52 +01:00
8027c94a41
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_window
2021-03-08 08:35:49 +01:00
1efa9a06f6
Adjustable wipe tower brim
2021-03-05 16:41:02 +01:00
252aa9b229
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_window
2021-03-04 13:24:08 +01:00
d99895805c
Follow-up of 6a46b71dc1 - Fix build on non-Windows platforms
2021-03-03 15:17:45 +01:00
6a46b71dc1
#5843 - GCodeProcessor: added processing of lines G28
2021-03-03 13:53:37 +01:00
da7d7ae11b
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_window
2021-03-03 09:07:28 +01:00
2c8f385c7f
1st installment of g-code window in preview
2021-03-02 10:01:06 +01:00
9a31580bde
GCodeProcessor -> use boost::starts_with()
2021-02-26 16:00:32 +01:00
c9666ea257
#4402 - Review and merge of #6106 Temperature visualization in preview and G-code Viewer by combolek
2021-02-26 14:17:53 +01:00
a53de51b22
Fix of 8f293f0cb5
...
When was set use_external_mp_once to true then after first calling the avoid crossing perimeters this flag was reset which cases that on the second call of the avoid crossing perimeters the travel move didn't process as external.
2021-02-25 23:30:22 +01:00
48481c10b4
Tech ENABLE_VOLUMETRIC_EXTRUSION_PROCESSING set as default
2021-02-25 16:29:18 +01:00
43c05d35ea
Fix of crash when using raft with modified Shape-Box with height 0.5mm #5652
...
Reworked skirt generator to only generate skirt at non-empty layers
(layers that actually extruder object or support) and to respect minimum
layer height. Skirt generator stops at the first layer where those both
conditions cannot be met.
2021-02-25 12:18:11 +01:00
e44c1006d5
#6117 - Allow import of gcode files processed by ArcWelder
2021-02-24 09:46:42 +01:00
77d007c484
Fixed calculation of a distance from begin of a contour in the avoid crossing perimeters.
...
The total length of a contour was incorrectly computed, which could cause the longest detour was selected instead of the shortest one in some cases.
2021-02-23 20:56:36 +01:00
dc576b0511
Fixed inner offset in the avoid crossing perimeters.
...
Minimum contour width was used incorrectly, which could lead to breaking contour to more disconnected polygons.
2021-02-23 20:43:34 +01:00
1904b7b904
Bugfix: custom seam did not work for triangles that were exactly vertical
...
The projection algorithm was originally made for custom supports, so vertical triangles
were not interesting. They are for seam. Instead of rewriting the algorithm and risking
more bugs, the edge case is detected and the triangle is tilted slightly.
2021-02-22 16:26:16 +01:00
bd2cbea202
Fix aligned seam when sequential printing is enabled
2021-02-22 16:26:16 +01:00
bbf5c62af5
Follow-up of 9afaebac75 -> Fixed wrong gcode line numbers shown on preview horizontal slider when time estimation for silent mode is active
2021-02-19 14:12:49 +01:00
86d7e1fb90
#5538 - Validation of custom g-code against gcode processor reserved keywords
2021-02-18 14:34:40 +01:00
50c6fc1719
Tech ENABLE_TOOLPATHS_WIDTH_HEIGHT_FROM_GCODE set as default
2021-02-17 11:23:17 +01:00
6ea5781709
Fix of Supports printed too slowly. #984
...
Processing of CoolingBuffer is newly staggered for support layers
until the 1st object layer above supports is received by CoolingBuffer.
2021-02-16 11:30:57 +01:00
9afaebac75
#5611 - Added option to show gcode line number on horizontal slider in preview
2021-02-16 10:07:05 +01:00
cf260f6e44
#6006 - Gcode processor: fixed error prompt for gcode lines Tc, Tx, T?
2021-02-11 11:48:46 +01:00
db2d78ff21
Reduction on compiler warnings, mainly on MSVC.
...
Fix of the new gap_fill_enable flag: Take it into account when comparing
regions.
2021-02-10 17:29:07 +01:00
1834ebe981
Fixing Clang warnings 3
2021-02-08 17:52:29 +01:00
0ff0444dcc
Fixing Clang warnings 1
2021-02-08 17:52:29 +01:00
de32992b49
Fix of Fan ramp not correct for layer 1 #5893
2021-02-08 12:43:27 +01:00
5f86d11c74
EdgeGrid refactoring to support both open and closed contours.
...
Squashed commit of the following:
commit 4e13a8fe19abcc9aae39a9bc4c7953a743196504
Merge: 6ae766409 6f89da1f3bubnikv@gmail.com >
Date: Fri Feb 5 11:19:35 2021 +0100
Merge remote-tracking branch 'remotes/origin/master' into vb_edgegrid_open_lines
commit 6ae76640942269993c942861f0444088843e3fa1
Author: Vojtech Bubnik <bubnikv@gmail.com >
Date: Fri Feb 5 11:14:48 2021 +0100
EdgeGrid enhancement to accept both the open and closed lines.
commit 36a5efcd558bd5fd5f46b5f561387a2c73221553
Author: Vojtech Bubnik <bubnikv@gmail.com >
Date: Fri Feb 5 10:52:14 2021 +0100
EdgeGrid improvements: Documentation, one bug fix after recent refactoring.
commit 6f89da1f39meszaros.q@gmail.com >
Date: Thu Feb 4 20:31:50 2021 +0100
Disable libicu for boost-regex
Should have been disabled from the beginning
commit ffc77b1a72a0be9b5622fd33defeebb24bf07b34
Author: Vojtech Bubnik <bubnikv@gmail.com >
Date: Thu Feb 4 18:40:33 2021 +0100
EdgeGrid: Annotated those methods that do not work with open contours.
commit 8039a645b4bf0c46c99b90a9c34e7189d7442f86
Author: Vojtech Bubnik <bubnikv@gmail.com >
Date: Thu Feb 4 18:28:21 2021 +0100
Refactoring of EdgeGrid structure to support both closed and open lines.
2021-02-05 11:21:04 +01:00
73c9f939e0
Squash merge of lh_brim_rework,
...
brim separated to Brim.cpp,hpp
Refactored accessors to PrintObjectPtrs, PrintRegionPtrs, LayerPtrs,
SupportLayerPtrs for const correctness.
2021-02-03 15:12:53 +01:00
b5280fbed9
Fixing GCC warnings 1
2021-01-29 10:46:33 +01:00
4d3cb19423
5677 - GCodeProcessor accepts gcode line T-1 as valid for RepRapFirmware and RepRapSprinter
2021-01-04 14:21:24 +01:00
6e3b4b6fd8
Random seam: optimization and fix of a possible infinite loop
2020-12-17 15:48:25 +01:00
b8fc1d3173
GCodeViewer - Fixed visualization of time estimates for silent mode
2020-12-17 11:41:41 +01:00
80251e0cf9
Fixed of unintentional disabling of wipe even in cases when avoid crossing perimeters weren't applied due to exceeding the maximum detour length.
2020-12-16 13:17:09 +01:00
dcd69b4ef8
#5415 - Fixed preview when volumetric extrusion is turned on
2020-12-15 15:57:22 +01:00
0ca337ac7a
Apply avoid crossing perimeters also for supports.
2020-12-15 06:46:44 +01:00
cdb05d103a
Tweaked clamping of max toolpaths width
2020-12-14 15:11:38 +01:00
9605e235b8
#5378 - Do not apply machine limits for non-Marlin firmwares
2020-12-14 14:02:50 +01:00
