* Add Rectilinear Support for Normal support type. Fix issue #9508.
* Remove duplicate the rotation logic, use raft_interface_angle function.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Fixes#11082
Slicing is going to the endless loop when the `Base pattern spacing` value is 0 for `Tree Slim` support.
Co-authored-by: SoftFever <softfeverever@gmail.com>
* New materials
* Temps
* Full filament type list
* Improve nozzle temperature range validation messages
Separates minimum and maximum recommended temperature warnings for nozzle configuration + generig °c usage.
Co-Authored-By: Alexandre Folle de Menezes <afmenez@gmail.com>
* Material Updates
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* petg-cf10 should be petg-cf
options.
* Pla reduced range
* Adjust some temps
* FilamentTempType Temperature-based logic
* chamber temps
* Fromatting
* Filament chamber temperature range support
Introduces get_filament_chamber_temp_range to retrieve safe chamber temperature limits for filament types. Updates ConfigManipulation to use these limits instead of hardcoded values.
* add adhesion coefficient and yield strength
Replaces hardcoded material checks for adhesion coefficient and yield strength with lookup functions using extended FilamentType struct.
* Thermal length
* Fix
* Refactor filament type data to MaterialType class
Moved filament type properties and related lookup functions from PrintConfig.cpp into a new MaterialType class.
* Fix adhesion_coefficient
Co-Authored-By: SoftFever <softfeverever@gmail.com>
---------
Co-authored-by: Alexandre Folle de Menezes <afmenez@gmail.com>
Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Generate support interface iron extrusion
* Always ironing last
* Add options
* Move ironing speed to speed tab
* Don't iron places that are covered by upper support layers
* Disable support interface spacing settings when support ironing is enabled
* Update text
* Clipper: Verify range of int32 coordinates on input.
Cherry-picked from prusa3d/PrusaSlicer@fa7debf49d
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* ClipperLib: Optimized PointInPolygon() to calculate cross products
with int64s instead of doubles.
Cherry-picked from prusa3d/PrusaSlicer@9dca8403fe
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Reworked the ClipperLib / Polygon types to use
the tbb::scallable_allocator to better scale on multiple threads.
Cherry-picked from prusa3d/PrusaSlicer@9cde96993e
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* use tbb::scallable_allocator for Polygons and ExPolygon::holes
to better scale on multiple threads
Cherry-picked from prusa3d/PrusaSlicer@b67ad6434d
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Fixed compilation on GCC and CLang
Cherry-picked from prusa3d/PrusaSlicer@b3b44681a9
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Remove clipper2 which is not used
* Removed shiny profiler from clipperlib
Cherry-picked from prusa3d/PrusaSlicer@7e77048593
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* ClipperLib: Further optimization of memory allocation using scalable_allocator.
ClipperLib: SimplifyPolygon() - changed default winding number to positive,
added strictly_simple parameter.
ClipperUtlis simplify_polygons() - removed "remove_collinear" parameter
Cherry-picked from prusa3d/PrusaSlicer@a7e17df25f
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* ClipperLib: emplace_back() instead of push_back().
Cherry-picked from prusa3d/PrusaSlicer@2e150795b1
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Fixed issue in a 32bit clipper, where IntersectPoint() checked for
the Y coordinate of the calculated intersection point for validity,
but the Y coordinate was already rounded to 32bits, thus an overflow
may have in rare cases masked invalidity of the result.
Cherry-picked from prusa3d/PrusaSlicer@b39c33414f
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Fixed Vojtech's out of boundary assert in Clipper library.
Cherry-picked from prusa3d/PrusaSlicer@0a202dcff3
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Update clipper to 6.4.2.
Cherry-picked from prusa3d/PrusaSlicer@b8b3cccb40
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* Try fix cmake opencv
---------
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
According to https://eigen.tuxfamily.org/dox/TopicPitfalls.html one
should just avoid using `auto` as the type of an Eigen expression.
This PR fixes most of them I could found in the project. There might be
cases that I missed, and I might update those later if I noticed.
This should prevent issues like #7741 and hopefully fix some mysterious
crashes happened inside Eigen calls.
/run/build/BambuStudio/src/libslic3r/Support/SupportParameters.hpp: In constructor ‘Slic3r::SupportParameters::SupportParameters(const Slic3r::PrintObject&)’:
/run/build/BambuStudio/src/libslic3r/Support/SupportParameters.hpp:172:39: error: ‘warning’ was not declared in this scope
172 | BOOST_LOG_TRIVIAL(warning) << "tree support default to organic support";
| ^~~~~~~
/run/build/BambuStudio/src/libslic3r/Support/SupportParameters.hpp:172:21: error: ‘BOOST_LOG_TRIVIAL’ was not declared in this scope
172 | BOOST_LOG_TRIVIAL(warning) << "tree support default to organic support";
| ^~~~~~~~~~~~~~~~~
/run/build/BambuStudio/src/libslic3r/Support/SupportParameters.hpp:175:39: error: ‘warning’ was not declared in this scope
175 | BOOST_LOG_TRIVIAL(warning) << "tree support default to hybrid tree due to adaptive layer height";
| ^~~~~~~
/run/build/BambuStudio/src/libslic3r/Support/SupportParameters.hpp:175:21: error: ‘BOOST_LOG_TRIVIAL’ was not declared in this scope
175 | BOOST_LOG_TRIVIAL(warning) << "tree support default to hybrid tree due to adaptive layer height";
| ^~~~~~~~~~~~~~~~~
(cherry picked from commit a63070bd4cbe012315b9532f5c199f6d2664333a)
1. fix the issue that setting top z distance=0 not working
2. remove too small extrusions of tree support
jira: STUDIO-8578
Change-Id: I8c3face9d6a756698a6fab876fdb1acc0686647c
(cherry picked from commit 4d219266a1f520445bec6ac5a0274dcfec4050e8)
1. speedup organic tree support by using parallel for intersection of bed area
jira: STUDIO-8451
2. add extra wall for hybrid tree support's tall branches
3. disable circle fitting for tree support. This feature produces inconsistent
circles for tree supports.
4. expose the option tree_support_branch_diameter_angle. Tree supports'
strength can be improved by increasing this value.
Change-Id: If3688ca895df98a77f6ca538077daf8fe94e53f1
(cherry picked from commit 7697eb3dc8f87204d28e6be9adaf55dfcdadbc74)
The expansion was too large and may miss sharp tails near the object.
jira: STUDIO-8400
Change-Id: Iee5bd15cc7c23f16d30365d5f1c9fbcc0a632c19
(cherry picked from commit 05174d07063d8296241de1d35f5b4196bc33a353)
1. fix hybrid tree support may go outside plate
github: #4769
2. fix false alarm of empty layer warning
jira: STUDIO-8178
Change-Id: I7bcc3959b06184901cbec946e8840c7a94bc1cab
(cherry picked from commit 647bd4213c363eff6258992f5f607c1f03cbc482)
Change the behavior of "tree support wall count" option, let it control precisely.
0 means auto.
jira: STUDIO-8068
github: 4780
Change-Id: I6d1a64cff9b121f5c0a3e910c5ddbfe6db198687
(cherry picked from commit a557bbe758cd352fa9bb48323995ed2c90737577)
1. keep all polygon nodes in drop_nodes
2. prevent generating too small polygon nodes
jira: STUDIO-8107
Change-Id: I1311158ab15097eb10727a8d6884b0bcd8136ef1
(cherry picked from commit 038b92a536a56568b1c6f385ce19ff36331cd46a)
this function crashes if there are empty elements in entities.
jira: STUDIO-7975
Change-Id: I0dbeb6b1151dd089be7617ebc3271691f64ac61e
(cherry picked from commit df30728617a89891c68e36cce771fb6380355b82)
(cherry picked from commit e42aabebb16253b0172fb80a58f58953aec8dda7)
Previously painting support enforces on vertical faces doesn't work, as projecting the facets downwards will give empty polygons.
Now we use a different mechanism to enable vertical paint-on enforces, by directly adding contact nodes.
Note: this feature only works with tree support as only tree support has contact nodes.
jira: none
Change-Id: Id171b1665566d142a6427285baccb40c0aa00949
(cherry picked from commit 9c882f61eb37350a4486df58de48f0ae489f2d15)
(cherry picked from commit 68625a6e601e2feef8e56693da1f58372b27b560)
1. do not add interface for small overhangs so supports are easier to
remove
2. calculate avoidance more accurately using real layer height
jira: STUDIO-6285
3. hybrid nodes won't collide with lower layers
4. calculate max move more accurately
5. do not increase radius if next layer has collision
jira: STUDIO-2296, STUDIO-7883
6. rewrite plan_layer_heights to prevent support layers overlap.
Now the tree support layers are completely independent to object layers.
6. increase collision areas for interface. The top layers may be too
close to interface with adaptive layer heights and very small overhang angle
Change-Id: I052c3f66e68afb7663e2d70c846dd09ed7086071
(cherry picked from commit aca511caebfdeec270d4fc0ec6bbbadde77cddc9)
(cherry picked from commit f2fc996652b3b204b4e554f57afed8519feb0397)
1. add rectilinear interface pattern for organic support
jira: STUDIO-7181
2. add tree support optgroup
Change-Id: I94882bc34a61c6adc06b8ecbc9f2323f9b039aac
(cherry picked from commit a8142ab3f37e0bd140a31a7e635b8475f471d7e3)
(cherry picked from commit 69cf816b9431bc21ca0187c7db1148e2d2e898ab)
To fix this we have to expand the enforcer areas just like organic support.
jira: STUDIO-7538
Change-Id: I8e4e3fd18b0e77db9beb57347d8da895fc83f4b0
(cherry picked from commit 319b3e2247e01e545bb9e4cebea7950d875cd89a)
The top z gap should be split if it's too large.
Also we use same logic for both synced and independent support layer.
jira: STUDIO-7232
github: #4191
Change-Id: Idca792e8fa51a83c2a09441ecac64d40b91d6390
(cherry picked from commit c262a7ea137db09e453c157115b3d5417a32886d)
