b9f3fcc678
Merge remote-tracking branch 'origin/lm_temperature_fix'
2018-09-14 14:56:21 +02:00
0dc72ccbd8
Added number of toolchanges into 'Sliced info' statistics
2018-09-12 09:28:26 +02:00
614fd16ba3
Wipe tower extrusions are now accounted for in the filament consumption statistics
2018-09-05 15:35:35 +02:00
4ae23b09c8
Another attempt to fix the temperature change issue
2018-09-05 09:18:42 +02:00
2a72c16bf8
Bugfix - extruder temperature was sometimes not correctly set on the wipe tower
2018-09-03 10:15:40 +02:00
a1e2b58278
Yet another experimental parameter to adjust the initial loading speed of a newly loaded filament
2018-08-21 14:36:24 +02:00
3e88abd8af
New experimental parameter to adjust initial loading speed of the filament from the nozzle
2018-08-14 16:23:23 +02:00
ffd1e72a13
Retraction after ramming is now done without moving the head
2018-08-13 14:51:03 +02:00
1226a480fd
Wipe tower postprocessing, wipe tower block on 3D plate improved.
...
- it renders red with one egde as indeterminate, the front edge is where the wipe tower will start
- changing width changes depth of the block (as requested)
- the block shows the brim of the wipe tower
- after slicing, the block is rendered in usual dark green and takes the exact shape of the tower (also with brim)
- moving or rotationg the block after slicing does not invalidate the wipe tower (and hence the exact block dimensions are preserved)
- changing anything that invalidates the wipe tower reverts the block back to the "indeterminate" shape
- the block is not shown after slicing, if the wipe tower is not actually generated (printing single color object with the wipe tower enabled)
This required changes in the wipe tower generator, which now generates the tower
at origin with no rotation. Resulting gcode is postprocessed and transformed during
gcode export. This means the wipe tower needs not be invalidated when it is moved or rotated.
2018-08-02 11:04:04 +02:00
b5bf33f19c
Shifted the MM priming lines inside a bit (for the out-of-bed detection)
2018-07-24 12:17:26 +02:00
682ebeb39b
Merge remote-tracking branch 'remotes/origin/wipe_tower_improvements'
2018-07-17 09:20:19 +02:00
69e8c564ce
Wipe tower fix - incorrect start/end position reported to the GCode generator when the tower was rotated
2018-06-28 10:22:04 +02:00
4eed42a723
Merge branch 'master' into wipe_tower_improvements
2018-06-26 12:58:04 +02:00
13711a878b
Wipe tower bugfix - the tower was printed incorrectly when the rotation angle was close to 90 degrees
2018-06-21 14:05:07 +02:00
51c6aebf63
Merge branch 'master' into wipe_tower_improvements
2018-06-21 10:41:01 +02:00
425a15afb9
Wipe into infill - copies of one object are properly processed
2018-05-31 16:21:10 +02:00
b6b1942ccb
Wiping into infill should respect infill_first setting, marking moved to separate function
2018-05-30 11:56:30 +02:00
37d03a2535
Bugfix: first color of the wipe tower preview was incorrect with some models
2018-05-30 11:02:00 +02:00
7717aa7e73
Fix of previous commit
2018-05-29 15:29:20 +02:00
33e494dadf
Analyzer tags for the wipe tower also generate layer height and line width (so the priming lines+brim are visible and ramming lines are correct width)
2018-05-29 12:41:40 +02:00
0d01da19af
Analyzer tags for the wipe tower also generate layer height and line width (so the priming lines+brim are visible and ramming lines are correct width)
2018-05-29 12:32:04 +02:00
dd2b553ce7
Feedrate on the first layer of the wipe tower properly set (bugfix)
2018-05-29 09:07:23 +02:00
7c95e59d2b
Wipe tower changes to reduce wiping volumes where appropriate
2018-05-24 17:24:37 +02:00
adf1f4ece0
Merge branch 'master' into wipe_tower_improvements
2018-05-15 11:22:58 +02:00
b6db3767a2
Bugfix: extruder temperature only changes when the temperature differs from the one last set (wipe tower)
2018-05-11 17:35:42 +02:00
f0ccdfa390
Fixed wrong extrusion paths detection with multimaterial objects
2018-05-07 14:23:07 +02:00
650489dd8a
New parameters actually connected to the wipe tower generator
2018-04-24 13:43:39 +02:00
8c77b9645c
Loading, unloading and cooling reworked, new filament parameters regarding cooling were added
2018-04-24 13:02:08 +02:00
a154fd34ee
Added parameter extra_loading_move, prevented high feedrate moves during loading
2018-04-16 14:26:57 +02:00
9ebff9ce00
Bugfix: a sign mistake was causing unnecessary travel moves
2018-04-09 13:35:39 +02:00
cb9937cde4
Corrected wipe tower comments in GCode
2018-04-06 12:02:52 +02:00
706dd7020f
New extruder temperature is only set when it differs from the old one
2018-04-04 14:59:31 +02:00
42baeee0ed
Fixed a bug regarding the sparse infill
2018-04-04 09:44:05 +02:00
e5f23bc11d
Fixed bug - negative feedrate was issued during loading of a new filament
2018-04-03 14:35:54 +02:00
281732ca38
Variable layer height enabled, nozzle diameters properly passed to the wipe tower generator
2018-03-29 15:32:09 +02:00
1b4dc685f4
Connected filament_ramming_parameters to respective dialog, other minor changes
2018-03-28 15:37:10 +02:00
9519fae490
Partial refactoring of wipe tower code (got rid of global constants, etc)
2018-03-21 15:57:17 +01:00
a782424d5f
Wipe tower generator connected to purging volumes from the configuration layer
2018-03-20 15:07:18 +01:00
349a8a88ae
Bug fix: speed for finish_layer was not properly set
2018-03-19 15:35:31 +01:00
67009d80fd
Ramming parameters reduced to one and connected to the wipe tower generator again
2018-03-15 14:04:12 +01:00
27ab8ff4e1
Configuration layer changes (cooling_time, bridging, adhesion moved from dedicated dialog to filament/print settings)
2018-03-12 15:41:25 +01:00
b5fd4ddb8c
Removed an unnecessary wait
2018-03-12 08:35:35 +01:00
6e39f61198
Priming extrusions, nozzle-wipes when leaving tower, removed few unnecessary moves
2018-03-09 12:40:39 +01:00
8340a71f88
Lots of unnecessary code removed, minor refactoring changes
2018-03-08 16:44:52 +01:00
f5cf181372
Sparse infill repositioned always to the same side
2018-03-07 15:34:12 +01:00
76aa134f66
Ramming lines that would end unsupported are made longer to reach to the edge
2018-03-07 11:44:47 +01:00
e1922cb2c5
Supressed preview on unloadingmoves
2018-03-07 08:55:53 +01:00
af281e13db
Last wipe on layer accounts of border and sparse infill (ugly, yet working)
2018-03-06 19:14:12 +01:00
6c223c2f84
Fixed cooling time calculation, removed unnecessary diagonal moves, fixed 'stringing' on start and end of narrower wipe tower layers
2018-03-05 16:51:31 +01:00
4058f00275
Added print head moves after ramming and removed one unnecessary diagonal move
2018-03-05 13:53:49 +01:00
