87879034f6
Merge remote-tracking branch 'origin/master' into lh_avoid_crossing_perimeters
...
# Conflicts:
# src/libslic3r/MotionPlanner.cpp
# src/libslic3r/libslic3r.h
2020-11-29 17:27:23 +01:00
ddc9e26f19
Follow-up to 80e8b5e985
...
Removed the legacy PreviewData.cpp,hpp
2020-11-21 11:02:20 +01:00
04c2fde671
Removed the old motion planner.
2020-11-17 09:33:30 +01:00
812cbade4d
Fills:
...
1) New algorithm for connecting along the perimeters is now applied
to Honeycomb, Hilbert and similar planar filling curves.
2) The old expensive path chaining is not applied if the new algorithm
to connect along the perimeter lines is called afterwards.
2020-11-16 12:51:51 +01:00
e77fc43159
Merge remote-tracking branch 'remotes/origin/master' into lh_adaptive_infill_hooks
2020-11-16 10:54:19 +01:00
4280fdb5f2
Reworked connection of infill lines to perimeter lines.
...
Added a new "infill_anchor" parameter.
2020-11-16 10:54:00 +01:00
28b4ad92ea
Fix of previous commit
2020-11-11 17:35:29 +01:00
66f325cef4
Follow-up of 80e8b5e985 -> Fixed include in GCode.xsp
2020-11-11 17:28:56 +01:00
e0b0a2cdcf
Fix of previous commit.
2020-09-24 20:32:52 +02:00
8f04a76337
Final fix of Perl bindings
2020-09-24 14:52:05 +02:00
7cdc61b67a
Trying to patch the Perl bindings.
2020-09-24 16:41:47 +02:00
aa0335a750
Trying to fix perl bindings
2020-09-24 16:18:56 +02:00
dea641183c
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-08-10 14:22:46 +02:00
510e787bc7
Fixed Print.xsp
2020-08-04 10:26:08 +02:00
f138978fe7
Merge remote-tracking branch 'origin/master' into ys_ph_printers
2020-07-21 09:47:29 +02:00
89035febfa
Fixed includes
2020-06-24 09:20:04 +02:00
5c7b0948bc
Fixed conflict after merge with master
2020-06-19 11:49:59 +02:00
81b809f2a1
Fixed broken compilation of Perl bindings.
2020-06-16 14:39:08 +02:00
2eb4b2caed
Fixed conflicts after merge with master
2020-05-27 10:32:02 +02:00
3e855d36dc
Fixed unit tests after previous include manipulations
2020-05-26 15:33:44 +02:00
277b340481
Attempt to fix build on OsX
2020-05-07 12:03:17 +02:00
27b9f85607
Fixed build when tech ENABLE_GCODE_VIEWER is disabled + fixed perl code
2020-05-07 11:24:36 +02:00
e5c45405d4
Fixed conflicts after merge with master
2020-04-24 10:59:03 +02:00
1bffc2b99b
Add ModelArrange.hpp as extension to Model.hpp, use it for duplicating
...
Refactored Arrange interface: remove the union based BedShapeHint, replace it with proper function overloads
WARN: this commit is only intermediate, it does not compile.
2020-04-23 18:19:03 +02:00
89d376dc35
Add min_object_distance method as free function taking ConfigBase argument
2020-04-23 18:17:37 +02:00
ece4f10bf7
Updated Print.xsp
2020-04-02 12:30:54 +02:00
e7d2fcf0be
Fixed unit tests broken with the previous commit (Spiral Vase fix).
...
Fixed a crash in the previous commit.
2020-02-09 09:43:15 +01:00
b8c898bf40
Fixed a bug in validation of the FDM Print to check for extruder
...
collisions against already printed objects: Rotation of an object
was not being taken into account.
Fixes #2450 PrusaSlicer 2.0 Sequential printing vs rotate object
Fixes #3585 Always Sequential Printing Error (Regardless of setting, placement or object size)
Fixed some collisions in sequential print just after arrangement by
making the validation using a slightly lower extruder radius value
than the arrangement.
Refactored PrintObject coordinate system so that the PrintObject's
coordinate system is always centered in respect to its ModelObject's
geometries. This refactoring may improve path planning a bit and
it may lower the requirements on bits representing Clipper coordinates
by 1 bit.
2020-02-07 14:10:27 +01:00
4f8f619686
Fixed Perl bindings after refactoring.
2020-01-23 10:35:03 +01:00
afbc4a4cf2
Fixing perl bindings after refactoring
2020-01-06 09:36:03 +01:00
6585e58e83
Fix of perl bindings
2019-10-16 11:34:45 +02:00
69c8b1cd21
new cheaper constructor for DynamicPrintConfig from FullPrintConfig:
...
DynamicPrintConfig::full_print_config()
new cheaper constructors of DynamicConfig / DynamicPrintConfig from ConfigBase
Unit tests: ported test_model from upstream Slic3r, thanks @lordofhyphens
Unit tests refactored to use less autos and initializer lists for readibility,
DynamicPrintConfig is handled by value, not by shared pointer.
2019-10-16 11:16:50 +02:00
f8ff23638f
Fixed regression due to ExPolygonCollection to ExPolygons refactoring.
...
Fixed crashes in BridgeDetector due to unexpected implicit conversion
to a const temporary.
2019-10-04 16:50:01 +02:00
564eddd99d
FDM Print refactoring:
...
Layer newly remembers bounding boxes of slices,
the bounding boxes are used by G-code generator & newly the support
generator.
Slices are stored as ExPolygons, not ExPolygonCollection.
2019-10-01 17:17:08 +02:00
331c187b39
Rest of the path chaining has been replaced with the new algorithm.
...
PolylineCollection.cpp/hpp was removed, use Polylines instead.
Various first_point() / last_point() now return references, not copies.
2019-09-27 18:17:21 +02:00
d06831076d
WIP: Consolidation of shortest path calculations,
...
various chaining algorithms are replaced with the improved TSP
algorithm.
2019-09-26 17:30:03 +02:00
2414dab85a
Fix of perl bindings
2019-09-19 14:31:50 +02:00
519f2b62e5
Fix of Perl bindings after ExtrusionEntity::clone() refactoring
2019-09-16 15:38:27 +02:00
d146a0237e
WIP: Reworked the infill generator to merge areas with the same
...
properties.
Note for Vojtech:
Review src/libslic3r/Fill/Fill.cpp once again,
add test for G-code generator properties (extrusion speed, cooling?)
Fixes Modifier slice/move efficiency #1005
2019-09-04 16:11:16 +02:00
34013ad142
Fixed broken Perl bindings.
2019-07-25 14:52:51 +02:00
c7cc760067
Merge remote-tracking branch 'origin/master' into vb_undo_redo
2019-07-04 20:22:15 +02:00
27ee68d2f9
WIP Undo / Redo: ModelID / ModelBase renamed to ObjectID / ObjectBase
2019-06-27 11:02:45 +02:00
ac6969c992
Reworked the Perl unit / integration tests to use the same Print
...
interface that the application is using. Old interface used just
for the integration tests was removed.
2019-06-20 20:23:05 +02:00
8bf6e69851
Removed the layer_height_ranges from the Perl bindings and unit tests.
2019-06-20 16:28:37 +02:00
35b3fd3176
Integrated the new layer height spans with configs into the backend.
...
Fixed some compiler warnings.
2019-06-20 16:15:09 +02:00
0bb8ee149e
Sharing TriangleMesh objects between the front end (UI) and back end
...
(background processing)
2019-06-11 17:08:47 +02:00
af5017c46c
admesh refactoring: Use Eigen vec3i for indexed triangles.
2019-06-10 21:14:58 +02:00
6defabea53
admesh refactoring: separation of the shared vertices / indices
...
into an indexed_triangle_set structure
2019-06-10 18:30:54 +02:00
65238a89b1
admesh refactoring: Removed the shared_vertices counter as it is now
...
contained inside v_shared std::vector
2019-06-10 17:36:15 +02:00
a1c38794fb
Refactored admesh to get rid of the error and fp members of stl_file.
2019-06-10 17:17:36 +02:00
