Fan speed will be ramped up linearly from zero at layer disable_fan_first_layers
to maximum at layer full_fan_speed_layer. full_fan_speed_layer will be
ignored if lower than disable_fan_first_layers, in which case
the fan will be running at maximum allowed speed at layer
disable_fan_first_layers + 1.;
WIP: The cooling PresetHints are likely not finalized yet.
2) Activating the physical_printer_settings_id when loading from 3MF, AMF, GCode.
The physical printer is only activated if it references the printer_settings_id
loaded from the same file.
3) When loading the presets from 3MF, AMF, GCode, the "external" profiles
are no more created for profiles which differ from the local profiles
the loaded profiles reference. Instead, the referenced profile is activated
and modified with the loaded preset. If the referenced profile does not
exist, but the profile refers to a system profile with the "inherits"
fileds, the system profile is loaded and modified instead.
This works for all profiles with the exception of multi-extruder
printer with multiple filament profiles modified. In that case
the first modified filament profile will be loaded as modified,
while the other modified profiles will be loaded as "external".
This should fix
Physical printer + 3mf file, wrong preset used to generate gcode #5178
and possibly
https://github.com/prusa3d/PrusaSlicer/issues/5272
1) The macro-processor sanitizes the source code line for invalid UTF-8
characters. Ideally these invalid characters would be replaced with ?,
they are just dropped as of now. Better than showing an empty string
when converting to wxString though.
2) G-code export collects full error message for 1st occurence of an error
for each custom G-code block.
3) The composite error message now displays the errors collected in 2).
4) The error window is now scaled bigger and the Slicer logo is smaller
if the text is to be rendered with monospaced font, as the monospaced
text will not be word wrapped.
Errors in the file output templates are reported in mono-spaced font,
so that the arrow character ^ is displayed at the right column
pointing to the offending spot.
+ Fixed translation for the "Extruder n" category on the Printer Settings Tab
+ Fixed a crash, when scrolling inside Search imGui with some localization (e.t. Russion)
In addition to an existing "layer_z" placeholder variable,
a new "max_layer_z" has been added to custom G-code sections accumulating
maximum of "layer_z" over the print. This value may be used for example
in the end G-code of a sequential print to lift the print head
up before travel over the whole print bed.
Fixed some issues in internal anchors of the Adaptive Cubic infill.
The ugly and dangerous implicit casting operators in Line, MultiPoint,
Polyline and Polygon were made explicit.
