1. save to appconfig and project setting
2. use it to group
jira: none
Change-Id: Id4048fc1b47f6904b2e9c0154aaa3a2b03590437
(cherry picked from commit da32b878b3d7ca95ae5c4786102848c1e8a5ab2d)
we need to keep the original values and update after pre-slice
jira: no-jira
Change-Id: I232d3c43340b4a23bc42121bd05380746e736f20
(cherry picked from commit 7b7ebf1b959ba5c967baff30fb226c808a2e7d44)
* Add some new non-overlapping functions for rotation surfaces/infills
I can't post the entire package of changes yet, but this is just the beginning. These features do not affect the latest changes to the pattern rotation system. They are merely adding new functionality.
* Added relative rotation of the infill according to the template.
* Update PrintConfig.cpp
* Update PrintConfig.cpp
* Update PrintConfig.cpp
* Add height limitation
* Both sparse and solid. +one-time instructions
* implementation v3
need for clean code in future
* + Multiply Instructions
* Add solid layers into sparse infill
* Update Layer.hpp
* Update PrintObject.cpp
* Update Tab.cpp
* Remove some bugs and increase quality
* rename apply_model_direction to align_infill_direction_to_model
* Change the data type of top_surface_direction and bottom_surface_direction to float so that they are consistent with other infill direction parameters.
* remove top_surface_direction and bottom surface_direction options
* clean code
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Feature: Fuzzy Skin Extrusion Mode
This extension allows you to add new features to the fuzzy skin generator.
* Add auto switch to Arachne mode
* Move dialog to `update_print_fff_config` and update how `is_msg_dlg_already_exist` is used
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* Infill Line Multiplier
* Modular Offset Function
* Lightning multiline
* Crosshatch Multiline
ipCrosshatch
* cleaning
Cleaning
clean2
* 3d Honeycomb
cut poliline ends
* Fill Tpmsd Multiline
Fill Tpmsd Multiline
* Update Multiline function
multiline funcion simplify
* Update FillTpmsD
* FillHoneycomb
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Fix Honeycomb Multiline
Simplify polylines in honeycomb infill generation
* Improve multiline infill support and pattern simplification
Moved multiline infill application after pattern translation and simplification in Fill3DHoneycomb, and added multiline support to FillAdaptive. Updated honeycomb and 3D honeycomb infill to simplify polylines to 5x line width. Extended GUI and config to support multiline for Adaptive Cubic infill pattern and clarified max value comment.
minimum changes
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* Increase multiline fill spacing in honeycomb infill
Adjusts the spacing parameter in the multiline_fill function to 1.1 times the original spacing, potentially improving infill distribution or print quality.
* Refine fill_multiline tooltip and pattern support logic
Updated the tooltip for the 'fill_multiline' parameter to improve clarity and punctuation. Refactored the logic in ConfigManipulation.cpp to clarify which infill patterns support multiline infill.
* better management of non supported infill patterns
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* fix: Set the default value for the skeleton infill width to 0 fork skipping the min check
* fix: Update default value for skeleton infill line width to 100%
* Create top surface density option
* Update tooltip
* Specify what 0% top infill means
* Add density for bottom layers
* Discourage users from using top/bottom density incorrectly
* Fix percent don't need translation
* Fix incorrect indentation
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* SPE-2405: Add Zig Zag infill that is rectilinear infill but with a consistent pattern between layers.
This Zig Zag infill is inspired by the Zig Zag infill in Cura.
Change-Id: I798affa99f4b5c3bd67f47643e67530fb7c3e0cb
(cherry picked from commit 2808d04d5deef6f99f9618648e46f11de03efc98)
* Add Cross zag and locked-zag for shoes
Ported from BambuStudio
* wip
* sparse infill roratation template
* solid_infill_rotate_template
* remove rotate_solid_infill_direction
* hide sparse infill rotation template for non applicable infill pattern
* hide solid_infill_rotate_template for non supported solid infill patterns
* update icon
* support empty string for ConfigOptionFloats deserialize
* fix build errors
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* Generate support interface iron extrusion
* Always ironing last
* Add options
* Move ironing speed to speed tab
* Don't iron places that are covered by upper support layers
* Disable support interface spacing settings when support ironing is enabled
* Update text
* Fix punctuation of enumerations
* Add missing '?' at the end of questions on hints
* Add periods after error messages
* Add punctuation to all tooltips
* Add missing periods on the pt-BR translation
* Add new Bambu RIB wall feature, including only the rib wall generation algorithm.
* Fix Linux compilation errors.
* Attempt to fix flatpak build
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* Remove extra spaces between words
* Remove extra spaces after punctuation
* Remove extra spaces before punctuation
* Always needs a space after punctuation
* Always needs a space before parens
* Remove trailing spaces before newline
